Imported Upstream version 2.4.2upstream/2.4.2

415 files changed, 358019 insertions, 0 deletions

diff --git a/AUTHORS b/AUTHORS
new file mode 100644
index 0000000..b810761
--- /dev/null
+++ b/AUTHORS
@@ -0,0 +1,51 @@
+* GNU Libtool was conceived, designed and implemented by:
+
+    Gordon Matzigkeit		gord@gnu.org
+
+* GNU Libtool's Dynamic Loader library (libltdl) was conceived,
+  designed and implemented by:
+
+    Thomas Tanner		tanner@ffii.org
+
+* GNU Libtool and libltdl have previously been maintained, enhanced,
+  ported and otherwise advanced by:
+
+    Alexandre Oliva		oliva@dcc.unicamp.br
+    Ossama Othman		ossama@debian.org
+    Robert Boehne		rboehne@ricardo-us.com
+    Scott James Remnant		scott@netsplit.com
+
+* GNU Libtool and libltdl are currently being cajoled, bullied,
+  rewritten and otherwise dragged into the future by:
+
+    Gary V. Vaughan		gary@gnu.org
+    Bob Friesenhahn		bfriesen@simple.dallas.tx.us
+    Peter O'Gorman		peter@pogma.com
+    Ralf Wildenhues		Ralf.Wildenhues@gmx.de
+
+* The following people also enjoy write access under the given rules:
+
+    Peter Rosin			peda@lysator.liu.se
+    Noah Misch			noah@cs.caltech.edu
+    Charles Wilson		libtool@cwilson.fastmail.fm
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
diff --git a/COPYING b/COPYING
new file mode 100644
index 0000000..d511905
--- /dev/null
+++ b/COPYING
@@ -0,0 +1,339 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.
diff --git a/ChangeLog b/ChangeLog
new file mode 100644
index 0000000..2780f5f
--- /dev/null
+++ b/ChangeLog
@@ -0,0 +1,175 @@
+2011-10-17  Gary V. Vaughan  <gary@gnu.org>
+
+	Release 2.4.2.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	numbers.
+	* NEWS: Update version number.
+
+	Replace leading spaces with tabs.
+	* libltdl/m4/libtool.m4, libltdl/config/ltmain.m4sh: Replace leading
+	spaces in soure code with tabs to match surrounding code.
+	Reported by Peter Rosin.
+
+	Make a note to use gnu/linux for version_type.
+	* libltdl/m4/libtool.m4 (version_type): Add a comment to change
+	version_type setting from 'linux' to 'gnu/linux' during the next
+	destabilising code refactoring.
+	* libltdl/config/ltmain.m4sh: ditto.
+	Requested by Richard Stallman.
+
+2011-10-04  Bart Van Assche <bvanassche@acm.org>
+
+	Typo fix - change func_apped into func_append
+	* libltdl/config/ltmain.m4sh: Fix typo.
+
+2011-10-02  Xin LI <d@delphij.net>
+
+	Avoid problems when FreeBSD goes to version 10.
+	* libltdl/m4/libtool.m4: Remove mentions of freebsd1. Use dots
+	for FreeBSD 2 and 3 detection to avoid future problems
+	* libltdl/m4/ltmain.m4sh: ditto.
+
+2011-09-25  Cristophe Jarry <christophe.jarry@ouvaton.org>
+
+	Avoid mentioning "Linux", use "GNU/Linux", if appropriate.
+	* TODO: Don't use bare "Linux".
+	* doc/libtool.texi: ditto.
+	* doc/notes.texi: ditto.
+	* libltdl/README: ditto.
+	* libltdl/m4/libtool.m4: ditto.
+
+2011-09-01  Peter O'Gorman  <peter@pogma.com>
+
+	Add flag to inhibit warnings.
+	* libltdl/config/ltmain.m4sh: Add --no-warn, --no-warning flags.
+	Reported by John Davd Anglin.
+
+2011-04-10  Kurt Roeckx  <kurt@roeckx.be>
+
+	tagdemo: do not rely on picking up symbols from indirect deps.
+	* tests/tagdemo/Makefile.am: Link to all libraries that the
+	demo application uses.
+
+2011-04-10  Svante Signell  <srs@kth.se>  (tiny change)
+
+	Set shlibpath_overrides_runpath for the Hurd.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [gnu]
+	<shlibpath_overrides_runpath>: Set to no.
+	* THANKS: Update.
+
+2011-03-22  Justin Lecher  <jlec@gentoo.org>  (tiny change)
+	    Rhys Ulerich  <rhys.ulerich@gmail.com>  (tiny change)
+
+	Don't filter OPENMP flags (-openmp & -fopenmp) from linker lines.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Treat OpenMP
+	flags like pthreads flags.
+
+2011-03-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	libtoolize: detect -I<dir> (without space) in ACLOCAL_AMFLAGS.
+	* libtoolize.m4sh (func_scan_files): Also accept -I<dir>
+	(without intervening space) in ACLOCAL_AMFLAGS.
+	* THANKS: Update.
+	Report from Jan Engelhardt.
+
+2011-03-04  Peter O'Gorman  <peter@pogma.com>
+
+	On Mac OS X try .dylib as well as .so with lt_dlopenext
+	* libltdl/m4/ltdl.m4: Define extra extension if module extension
+	differs from shared lib extension.
+	* libltdl/ltdl.c: Use it.
+	* tests/darwin.at: Test it.
+	* NEWS: Announce it.
+	Reported by Hans Aberg, Michael Ellis, and others.
+
+2011-02-12  Peter O'Gorman  <peter@pogma.com>
+
+	Install ltmain.sh without execute bit set.
+	* Makefile.am: change install rule for ltmain.sh
+	Reported by Křištof Želechovski.
+
+2011-02-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	docs: fix copyright years in PDF version of the manual.
+	* doc/libtool.texi: Fix copyright years.
+
+2011-02-01  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>  (tiny change)
+
+	Fix LD setting for 64-bit Solaris 2/x86.
+	* libltdl/m4/libtool.m4 (_LT_ENABLE_LOCK) [*-*-solaris*]:
+	Determine GNU ld options for 64-bit Solaris 2/x86.  Detect gld
+	2.21 _sol2 emulations.
+
+2011-01-27  Peter O'Gorman  <peter@pogma.com>
+
+	Don't loop through wrapper script arguments unnecessarily.
+	* libltdl/m4/ltmain.m4sh: Check that argv contains " --lt-"
+	before looping to remove wrapper script targetted arguments.
+	Performance regression reported by Dan McGee.
+
+2011-01-20  Gerald Pfeifer  <gerald@pfeifer.com>  (tiny change)
+
+	Remove support for FreeBSD 1.x.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS)
+	(_LT_SYS_DYNAMIC_LINKER): Remove handling of freebsd1* which
+	soon would incorrectly match FreeBSD 10.0.
+	* NEWS, THANKS: Update.
+
+2011-01-19  Peter O'Gorman  <peter@pogma.com>
+
+	Don't let verbose linker messages influence test results.
+	* libltdl/m4/libtool.m4 (_LT_REQUIRED_DARWIN_CHECKS): Ignore
+	stderr during tests for -flag unless it contains "flag".
+	* tests/darwin.at: Add test.
+	Reported by Jeremy Huddleston and also by David Fang.
+
+2011-01-09  John David Anglin  <dave.anglin@nrc-cnrc.gc.ca>  (tiny change)
+
+	Fix relink mode to use absolute path if hardcode_minus_L.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Use absolute path
+	when hardcoding with -L.
+
+2011-01-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix $wl setting for Solaris Studio 12.2 f90 on GNU/Linux.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux]
+	<lt_prog_compiler_wl>: Set to '-Qoption ld ' if we
+	detect Sun Fortran version 8.4 or newer.
+	Report by Terry Dontje.
+
+2011-01-07  Peter Rosin  <peda@lysator.liu.se>
+
+	Convert file name to toolchain format when blessing archives.
+	* libltdl/config/ltmain.m4sh (func_mode_install): When executing
+	old_postinstall_cmds and old_archive_cmds, convert $oldlib to a
+	format appropriate for the tool and provide that in $tool_oldlib.
+	Also use $tool_oldlib when stripping old libraries.
+	* libltdl/m4/libtool.m4 (_LT_CMD_OLD_ARCHIVE): Use $tool_oldlib
+	as argument to $RANLIB.
+	* THANKS: Update.
+	Report by Dan McMahill.
+
+2011-01-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Bump copyright years.
+	* ChangeLog.2010: New, rotated from ...
+	* ChangeLog: ... here.
+	* Makefile.am (EXTRA_DIST): Add ChangeLog.2010.
+	* NEWS, libltdl/config/ltmain.m4sh: Bump copyright years.
+	* libltdl/m4/libtool.m4 (_LT_COPYING, LT_OUTPUT): Likewise.
+	* libtoolize.m4sh: Likewise.
+	* doc/libtool.texi: Likewise.
+
+Continued in ChangeLog.2010
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2011 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
+
+vim:tw=72
diff --git a/ChangeLog.1996 b/ChangeLog.1996
new file mode 100644
index 0000000..ae9bee8
--- /dev/null
+++ b/ChangeLog.1996
@@ -0,0 +1,178 @@
+1996-12-17  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Don't allow *._o and *.l_o to be valid
+	object type suffixes, in spite of Automake's current ansi2knr
+	implementation.  Not all compilers allow non-`.o' suffixes.
+
+1996-12-16  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Delete the `libtool' version type.
+
+1996-12-12  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Use the full autoconf syntax when checking for GNU
+	C.  Delete library stripping program, until we have a correct
+	test.
+
+1996-12-11  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: On AIX 3, use /usr/ucb/nm, not /ucb/nm.  From Mark
+	Kettenis.
+
+1996-12-09  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	Reported by Charles Kerr:
+	* doc/libtool.texi (Creating Object Files): Doc fix independant ->
+	independent.
+
+	* ltconfig.in (ld_shlibs): SunOS 4 doesn't support shared library
+	dependencies.
+
+1996-12-08  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Release 0.7.
+
+	* Makefile.am (EXTRA_DIST): Add README-automake to the
+	distribution.
+
+	* ltmain.sh.in (link): When linking libtool libraries, use
+	standard objects if they are PIC.  This prevents spurious warnings
+	about invalid suffixes on AIX.
+
+	* demo/Makefile.am: Rename libhell to libhello, so that we're not
+	quite as offensive.
+
+	* ltconfig.in: Remove unnecessary host validity checking.
+
+	* ltmain.sh.in: Don't force people to use libNAME.la: SOMETHING.la
+	is good enough (for consistency with *.a handling).
+
+	* tests/demo.test: Break up into demo-conf.test, demo-make.test,
+	demo-exec.test, demo-inst.test, and demo-unst.test, so that passes
+	and failures are reported more quickly.
+
+	* tests/link-2.test: Test to make sure that .lo files don't get built
+	directly into programs.
+
+1996-12-07  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Accept files ending in .a as standard
+	object files.  Reported by Ulrich Drepper.
+	Remove support for creating profiled libraries (for now).
+	Transform all library objects into standard objects when linking a
+	program.
+
+	* ltconfig.in (thisdir): How embarrassing!  An error in the regexp
+	for finding the directory component of the script path.
+
+	* tests/tlibtool: A typically-configured libtool script, that uses
+	../ltmain.sh.in for its backend.
+
+	* tests/link.test: Make sure that it is legal to link against .a files.
+
+1996-12-05  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (compile): Support `.S' (preprocessed assembler)
+	files.  Reported by Anthony Green.
+
+	* libtoolize.in: Give clearer instrutions for how to update
+	aclocal.m4.
+
+	* ltconfig.in, ltmain.sh.in (link): Add support for creating
+	reloadable objects.
+
+1996-12-04  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (install): Fix passing -n flag to `libtool
+	--finish'.
+	(compile): Compile `.lo' and `.o' objects at the same time so that
+	non-PIC objects (if they are available) can be used for linking
+	into programs and creating static archives.  Suggested by Ulrich
+	Drepper.
+
+1996-12-03  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Give the full path to the libtool library
+	when sourcing it.
+
+	* ltconfig.in (old_striplib): Do a configuration test to determine
+	if old-style libraries actually can be stripped or not.
+
+1996-12-02  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* tests/demo.test: Try compiling the ../demo subdirectory, with no
+	special options.
+
+	* test-e.test: Check that we haven't used `test -e' anywhere in
+	our portable shell scripts.
+
+1996-12-02  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Delete reference to ABOUT-LIBS.
+
+	* tests: Added new subdirectory.
+
+	* doc/libtool.texi: Doc fixes, and finished up the Configuring
+	chapter.
+
+	* ltmain.sh.in (link): Allow *._o and *.l_o to be valid object
+	file suffixes, for Automake's ansi2knr implementation.
+	New option -version-info replaces -version-file.
+
+	[help]: Give a pointer to mode-specific help when appropriate.
+
+	* ltconfig.in: Changed messages to correspond to AM_PROG_CC_STDC.
+
+	* demo: Also test Automake's ansi2knr support.
+
+1996-11-19  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Bug fixes for AIX 4, and for static platforms.
+
+	* ltmain.sh.in (install): Fix for loops over arguments.
+	Need to quote ${IFS= } -> "${IFS= }".
+	(link): Fix soname_spec bug.  Create objdir whether or not we have
+	shared libraries.
+
+	* ltconfig.in: Check for library stripping program.
+	Use test -f instead of test -e.
+
+1996-11-18  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Don't run the RANLIB test unless RANLIB wasn't
+	set.
+	Be verbose about the environment variables we were configured
+	with.
+
+	* ltmain.sh.in (objdir): change to .libs.
+
+1996-11-16  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (install): Just plunge ahead with the
+	installation... don't try to enforce dependencies.
+
+1996-11-15  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in: Fix up $libdir to be $dest in install mode.
+
+1996-11-10  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh: Finished rewrite of compile, link, and install
+	modes.
+
+	* New ChangeLog file for libtool-0.7, since I've totally rewritten
+	libtool.
+
+1996-03-15  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* For historical reasons: this is when I started writing libtool.
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.1997 b/ChangeLog.1997
new file mode 100644
index 0000000..992b1ba
--- /dev/null
+++ b/ChangeLog.1997
@@ -0,0 +1,1324 @@
+1997-12-19  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in: Don't forget to quote the CDPATH substitution.  From
+	Tor Lillqvist.
+
+1997-12-18  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in, ltmain.in (CDPATH): Unset this environment variable
+	so that HP-UX shells, at least, don't print out the directory name
+	after a `cd' command.  From Tor Lillqvist.
+
+1997-12-10  Gordon Matzigkeit  <gord@gnu.org>
+
+	* demo/Makefile.am (hardcode): Change a bunch of references to
+	`$(LIBS)' to `-lm', since we no longer put -lm in LIBS.
+
+	* demo/configure.in: Delete the test for libm, since it is
+	standard on every system.
+
+	* demo/Makefile.am (libhello_la_LDFLAGS): Change to include -lm,
+	in accordance with new inter-library dependency code.
+
+	* ltmain.in (dependency_libs): Added to help people link programs
+	without having to explicitly specify inter-library dependencies.
+
+	* ltconfig.in (COLLECT_NAMES): Oops... I forgot to apply the AIX 3
+	restriction to the generated libtool script.  Reported by Stefan
+	Westerfeld.
+
+1997-12-05  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltconfig.in (thisdir): Quote $echo in the generated libtool
+	script for HP-UX.  From Markus F.X.J. Oberhumer.
+
+	* ltmain.in (link): Recognize the `.s' suffix.  From Markus
+	F.X.J. Oberhumer.
+
+	* ltconfig.in (link_static_flag): Don't quote ${wl} on HP-UX
+	because link_static_flag is never evaled.  From Eric Backus.
+
+	* tests/suffix.test (extensions): Recognize `.s'.  From Markus
+	F.X.J. Oberhumer.
+
+1997-12-01  Gordon Matzigkeit  <gord@gnu.org>
+
+	* demo/Makefile.am (helldl_DEPENDENCIES): Add `libhello.la' to our
+	dependencies so that parallel builds work correctly.  From Jim
+	Meyering.
+
+	* Makefile.am ($(srcdir)/ltconfig, $(srcdir)/ltmain.sh): Rewrite
+	these rules so that they are parallelizable.  Reported by Jim
+	Meyering.
+
+	* ltconfig.in (ltecho): We need special handling to quote the
+	`echo' variable itself.  From Alexandre Oliva.
+
+1997-11-29  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltconfig.in (COLLECT_NAMES): Enable this workaround for a broken
+	collect2 only on AIX 3.  This avoids problems on other AIX
+	versions.  Reported by Stefan Westerfeld.
+
+	* ltmain.in, ltconfig.in (finish_eval): Variable like finish_cmds,
+	except it is a single command which is evaled, and not shown.
+
+	* ltconfig.in: Port to AmigaOS.  From Joop van de Wege.
+
+	* ltmain.in (echo): Delete preamble to check for a working echo,
+	since we just use the one included in the generated libtool.
+
+	* ltconfig.in (echo): Include this definition in the generated
+	libtool script.
+
+1997-11-28  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltconfig.in, libtool.m4 (NM): Add /usr/ccs/bin to the PATH
+	before checking.  From Kaveh R. Ghazi.
+	(NM): Delete an extraneous egrep from ltconfig.
+
+	* ltconfig.in (finish_cmds): Change back to using `ldconfig -n'.
+	This makes Linux behave like other systems, which is more in line
+	with what libtool needs.
+
+1997-11-27  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltmain.in: Change a whole bunch of `progname' variables to
+	`modename'.  This is for clarity, and to fix a tiny typo in finish
+	mode.
+
+	* libtool.spec (Name, Version): Ditto.
+
+	* configure.in (AM_INIT_AUTOMAKE): Use PRCS to automatically generate
+	the proper package name and version number.
+
+	* ltconfig.in (gnu_ld_acts_native): Treat GNU ld like the native
+	linker on SunOS 4.x.  Suggested by Alexandre Oliva.
+	(deplibs): Change the defaults all over, since most systems cannot
+	handle inter-library dependencies.
+
+	* libtool.m4, ltconfig.in (NM): Only look at the first line of the
+	output from NM when determining whether it supports a command line
+	option.  This prevents false positives on OSes which ignore
+	invalid flags, like HP-UX, which prints `nm: unknown option "B"
+	ignored'.  Reported by Kaveh R. Ghazi.
+
+	* ltconfig.in (finish_cmds): On Linux, update ld.so.cache by
+	removing the `-n' flag from ldconfig.  Suggested by Kenneth
+	Albanowski.
+
+	* Makefile.am (maintainer-checkin, maintainer-release): New
+	commands to reap the full benefit of using PRCS to maintain
+	libtool version numbers.
+
+	* ltconfig.in, ltmain.in (global_symbol_pipe): Explicitly cast all
+	addresses to __ptr_t.  This fixes a bug due to a strict IRIX
+	compiler.  Suggested by Kaveh R. Ghazi.
+
+1997-11-23  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltmain.in (echo): For aesthetics, avoid using `$echo' when
+	`echo' will do *exactly* the same thing.  This prevents ugly
+	`printf %s\n timestamp > some.lo' commands from appearing in the
+	libtool output.
+	(link): Delete the `-allow-undefined' flag because it is now the
+	default.  Make `-no-undefined' in order for people to declare that
+	a library is entirely self-contained.  This prevents maintainers
+	from accidentally creating shared libraries that won't work on
+	AIX.  Reported by Stefan Westerfeld and Danny Backx.
+
+	* ltconfig.in (echo): Use an echo variable, just as in ltmain.in,
+	because we need it for quoting substitutions.  For most of the
+	script, though, use the default echo, just like Autoconf does.
+	Without this patch, character \001 ends up in global_symbol_pipe.
+	Reported by Lars Hecking and Jürgen Fluk.
+
+	* ltmain.in (echo): Set default to `echo=echo'.  Ooops.  That's
+	what you get for testing obscure code paths and forgetting to
+	revert to the original version.  Reported by Danny Backx.
+
+1997-11-14  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltconfig.in (hardcode_libdir_flag_spec): Set to `-R' for FreeBSD
+	2.2.  From Sean Kelly.
+	(postuninstall_cmds, old_postuninstall_cmds): Commands to run
+	after uninstall mode deletes the libraries.  Suggested by Joop van
+	de Wege.
+	(export_dynamic_flag_spec): On HP-UX, add the `${wl}-E'
+	export_dynamic_flag_spec.  Reported by Matthias Hoelzer.
+
+1997-11-11  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltconfig.in, ltmain.in (sed_quote_subst): Oops.  We forgot to
+	quote backticks.  Reported by Joop van de Wege.
+
+	* tests/quote.test: Add backticks to the backslashify test.
+
+1997-11-09  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltconfig.in (symcode): On IRIX, don't extract undefined
+	symbols.  When a function is inlined by G++, references to it are
+	still marked as undefined in the object file.  This means that our
+	symbol file causes undefined references, because there are
+	actually no matching global symbols.  Reported by Paul Kendall.
+
+1997-11-08  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltconfig.in: Don't forget to redirect the COLLECT_NAMES libtool
+	script fragment to the generated libtool, rather than to stdout.
+
+1997-11-07  Gordon Matzigkeit  <gord@gnu.org>
+
+	* libtool.m4 (LD): Add a more sophisticated test to determine the
+	ABI flag on IRIX 6.  Suggested by Lars Hecking and Ian Lance
+	Taylor.
+
+	* ltconfig.in, ltmain.in (COLLECT_NAMES): Only export this
+	variable if we are running under AIX.  Otherwise, we tickle a g++
+	bug under IRIX.  From Paul Kendall.
+
+	* Change bug reporting address to <bug-libtool@gnu.org>.
+
+	* ltconfig.in (allow_undefined_flag): OSF/1 3.x also requires a
+	wildcard argument to `-expect_unresolved'.  From Stephan Kulow.
+
+1997-11-06  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltmain.in (link): Use libname_spec.
+
+	* ltconfig.in (pic_flag): Somehow, the HP-UX pic_flag (`+Z') was
+	dropped between libtool-1.0 and now.  Add it back in.  Reported by
+	Akim Demaille.
+	Integrated more patches for OS/2.  From Jeff Freedman.
+	(libname_spec): New variable for OSes that don't require their
+	libraries to look like `libNAME.a'.
+
+	* ltmain.in (link): Only use global_symbol_pipe if it has been
+	defined.  From Stephan Kulow.
+
+	* ltconfig.in (global_symbol_pipe): Protect C fragment under C++
+	compilers.  From Stephan Kulow.
+
+	* Makefile.am ($(srcdir)/acinclude.m4,
+	$(srcdir)/demo/acinclude.m4): Change rules to use LN_S so that
+	they can be run on any system.
+
+	* ltconfig.in (archive_cmds): For NetBSD, don't include deplibs.
+	From Dieter Baron.
+
+	* ltmain.in (mkdir): Check that the directory doesn't exist before
+	we exit with error, so that we don't get races during parallel
+	builds.  From H.J. Lu.
+	(fbsd_hideous_sh_bug): Apparently, some FreeBSD /bin/sh's have a
+	bug that will empty base_compile unless we do this dummy
+	assignment.  From Marc van Kempen.
+
+1997-10-22  Gordon Matzigkeit  <gord@gnu.org>
+
+	* libtool.m4 (libtool_shared, libtool_static): Fixed logic error
+	to reenable override of libtool's defaults by setting
+	enable_shared or enable_static in configure.in.  Reported by Tom
+	Tromey and Stephan Kulow.
+
+	* ltmain.in (link): Add explicit support for compiler options that
+	begin with `+'.  Reported by Aubert Pierre.
+
+1997-10-20  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltmain.in: Silly me.  Change a bunch of occurances of "* $dir *"
+	into *" $dir "*.
+
+	* ltconfig.in (pic_flag): PIC is the default for AIX.  From Mark
+	Kettenis.  It is also the default for OSF/1.
+
+	* demo/Makefile.am (objdir): Quote double-quotes.  From Mark
+	Kettenis.
+
+	* ltconfig.in (global_symbol_pipe): This variable is not
+	double-evaled, so it should not be double quoted.  From Mark
+	Kettenis.
+
+1997-10-19  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltconfig.in (LD): Same as below.
+
+	* libtool.m4 (LD): Set LD if we discover an absolute path to GNU
+	ld.  This prevents breakage when `$CC -print-prog-name=ld' returns
+	an absolute directory name.  Reported by Ulrich Drepper.
+
+	* ltconfig.in: Port to OS/2 using EMX.  From Jeff Freedman.
+
+	* ltmain.in (link): Use old_archive_from_new_cmds.
+
+	* ltconfig.in (old_archive_from_new_cmds): New variable to
+	support DLL libraries.
+
+	* ltmain.in (link): Only `eval' export_dynamic_flag_spec if it is
+	not empty.  Reported by Stephan Kulow.
+
+1997-10-18  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltconfig.in (objdir): Use the .libs directory on all systems for
+	which that name is valid, and _libs on the others (like MS-DOS).
+	Suggested by Juergen Erhard.
+
+1997-10-14  Gordon Matzigkeit  <gord@gnu.org>
+
+	* ltmain.in (link): Added a bit more inter-language support to the
+	symbol file generation process.
+	Instead of complaining about unrecognized argument suffices, pass
+	them to the linker.  This prevents libtool from barfing on
+	mandatory arguments to linker flags.  Reported by Michael
+	Tiemann.
+
+1997-10-09  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.in (link): Change the wrapper script to follow symlinks
+	in order to find thisdir.  This should put the final nail in the
+	coffin for problems with wrapper scripts.  From Ian Lance Taylor.
+
+1997-10-07  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.in: Change a few `$echo' commands into `$show' to make
+	--silent mode behave as advertised.
+
+	* ltconfig.in (allow_undefined_flag): On OSF/1 4.x, use
+	`-expect_unresolved \*'.  From Christian Mondrup.
+
+	* ltmain.in (install): Change install mode to allow a specified
+	/bin/sh argument at the beginning of the install_prog.  Also,
+	specify the shell to run when invoking libtool recursively for
+	finish mode.  From Chris Provenzano.
+
+	* libtool.m4 (LIBTOOL): Change definition to include $(SHELL).
+	From Chris Provenzano.
+
+	* ltconfig.in: Port to UTS 4.x.  From Alistair Crooks.
+
+	* demo/Makefile.am (hc-libflag): Add rules to make this binary for
+	hardcode.test.
+
+	* tests/hardcode.test (hardcode_libdir_flag_spec): Check the hardcoding
+	properties of the flag_spec, too.
+
+1997-09-24  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in (LD): As with libtool.m4, don't override LD.
+	Do a whole bunch of ac_t quoting.
+
+1997-09-24  Ian Lance Taylor  <ian@cygnus.com>
+
+	* libtool.m4 (AM_PROG_LD): Don't override LD in the environment.
+
+1997-09-21  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* libtool.m4, ltconfig.in (NM): Arguments to the for loop must be
+	whitespace separated.  This fixes a bug under FreeBSD's /bin/sh.
+	From George Scott.
+
+	* tests/defs, tests/Makefile.am (clean-local): Change =inst to
+	_inst to fix portability on MS-DOS.  From Robert Hoehne.
+
+1997-09-20  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.in (deplibs): When building shared libraries, always add
+	-lc to deplibs.  Reported by Andreas Jellinghaus.
+
+1997-09-15  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in, ltmain.in (COLLECT_NAMES): If the COLLECT_NAMES
+	environment variable has not been set, set it to empty.  This
+	apparently fixes the AIX bug with GCC's collect2.  Reported by
+	Mark Kettenis.
+
+	* demo/Makefile.am, ltmain.in, tests/hardcode.test (objdir):
+	Changed objdir variable .libs to _libs.  This is another MS-DOS
+	portability fix.  Suggested by Robert Hoehne.
+
+	* tests/hardcode.test (objdir): New variable to simplify change from
+	.libs to _libs (MS-DOS portability fix).
+
+1997-09-13  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in, ltmain.in (hardcode_minusL): Fix typo by renaming
+	hardcode_minusL to hardcode_minus_L.  Also add FreeBSD
+	hardcode_libdir_flag_spec. From Paul Traina.
+
+	* ltmain.in (link): Honour multiple `-rpath' flags when linking
+	programs.  Suggested by Bengt Martensson.
+	Quote appearances of $echo in the wrapper script.  From Alexandre
+	Oliva.
+
+	* Makefile.am, configure.in, tests/tlibtool: Use ltmain.in instead
+	of ltmain.sh.in.
+
+	* ltmain.in: Rename ltmain.sh.in to ltmain.in.  This fixes a
+	portability problem (on MS-DOS, of all places!).  From Robert
+	Hoehne.
+
+1997-09-11  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Do not transform libtool objects to regular
+	objects if we did not build old libs.  Reported by Tomas Hiller.
+
+1997-09-05  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* demo/Makefile.am (hell_debug_LDFLAGS): Change hell.static to
+	hell.debug in order to reflect the new static linking semantics.
+
+	* ltmain.sh.in (link): Add new `-all-static' flag to prevent all
+	dynamic linking.  The old `-static' flag just prevents dynamic
+	linking against libtool libraries.  Suggested by Bengt
+	Martensson.
+
+	* ltconfig.in (with_gnu_ld): Add a test to make sure that we are
+	actually using GNU ld.  This fixes an inconsistency when running
+	ltconfig without using libtool.m4.  Reported by Ulrich Drepper.
+	(global_symbol_pipe): Delete symbols that are not valid C
+	identifiers.  Reported by Johan Danielsson and Bengt Martensson.
+
+	* tests/demo-exec.test, tests/demo-inst.test: Change references from
+	hell.static to hell.debug.
+
+	* tests/quote.test (echo): Add the same Digital Unix echo test fixes as
+	the ones to ltmain.sh.in from Todd Kover.
+
+	* tests/if.test, tests/test-e.test (scripts): Add ../lineno to
+	the scripts we check.
+	* tests/if.test: Check for accidental use of test X$something rather
+	than test "X$something".
+
+1997-09-04  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (echo): Quote all the uses of `echo' in all eval
+	statements.  Reported by Bengt Martensson and Alexandre Oliva.
+	(echo): Need to surround test args with double quotes, or the echo
+	test fails on Digital Unix 4.0.  From Todd Kover.
+
+1997-08-28  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (echo): Change test to one that uses printf.
+	This works on AIX, which has the same problems that Solaris does,
+	but no working echo program.
+
+	* tests/quote.test (echo): Change test to version that uses printf.
+	Be less strict about return results.
+
+1997-08-27  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Make sure that compile_command and
+	finalize_command are always evaled.  Quote any unknown linker
+	flags we need to pass through.
+	(compile): Use quoting for flags we pass.
+	(echo): I hate Sun!  The /usr/bin/echo on Solaris handles
+	backslash sequences, which makes it impossible to do backslash
+	quoting using echo and sed.  So, we search for an echo that obeys
+	the `echo '\t'` = '\t' equality.  Then we use `$echo' everywhere
+	in ltmain.sh.
+	Put tabs back into the ${IFS=	} sequences.  Emacs untabify is
+	libtool bane.
+
+	* ltconfig.in: Quote all variable values that may contain
+	metacharacters creating the libtool script.  This provides
+	complete protection, so that even single-quotes may appear inside
+	a libtool variable value.
+
+	* ltmain.sh.in (link): Quote finalize_command before putting it in
+	the wrapper script.
+
+	* tests/quote.test (echo): Add the test for a non-backslash-mangling
+	echo.
+
+1997-08-26  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (sed_quote_subst): Change the quoting procedure
+	again.  I think that the new one is robust for *all* characters,
+	including whitespace and metacharacters.
+
+	* tests/quote.test: New torture test for libtool metacharacter quoting.
+
+1997-08-25  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in: Change quoting procedure because some shells
+	cannot handle `]' in scan sets.  From Ian Dall.
+
+1997-08-22  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (execute): Added -dlopen flag handling.  Suggested
+	by Alexandre Oliva.
+
+1997-08-21  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Change executable wrapper to fix up value
+	of thisdir, as well as progdir, if the $0 path doesn't work.  This
+	guarantees that shlibpath_var is set correctly.  Add support for
+	execute mode.
+
+	* ltmain.sh.in (execute): New mode to automatically set
+	shlibpath_var, which allows easy debugging of uninstalled
+	executables and libraries.  Suggested by Kenneth Albanowski.
+
+1997-08-20  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Makefile.am ($(srcdir)/ltconfig): Use lineno.
+
+	* configure.in: Add AM_PROG_AWK for lineno.
+
+	* lineno: New program to automatically put line numbers in
+	ltconfig.
+
+	* libtool.m4, ltconfig.in (AM_PROG_LD): Yet Another Rewrite, which
+	incorporates the results of `gcc -print-program-name=ld'.
+	Suggested by Alexandre Oliva.
+
+1997-08-14  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in: Accept `--quiet' and `--silent' flags to turn off
+	command echoing.  From Juergen A. Erhard.
+
+	(compile): Recognize the Objective C `.m' extension.  From Juergen
+	A. Erhard.
+
+	(compile): Suppress error output from the second compilation (if
+	any) so that we don't get those frustrating duplicate error
+	messages.
+
+	* tests/suffix.test (extensions): Added Objective C extension, `.m'.
+
+1997-08-12  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Added messages to config.log to describe what sort
+	of test we are running.
+	(pic_flag): Added a sanity check for pic_flag.  This should fix
+	bugs reported using the cc bundled with HP-UX 10.  Suggested by
+	Bruno Haible and Akim Demaille.
+
+1997-08-01  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Add -dlopen and -dlpreopen support for
+	libtool objects.  This means that dlopened modules no longer need
+	to be shared libraries.
+
+	* ltconfig.in (pic_flag): GCC on IRIX 6 always builds PIC.
+	Reported by Ian Lance Taylor.
+
+	* libtool.m4 (LD): Always add `-n32' to the linker if we are using
+	GCC on IRIX 6.  Reported by Ian Lance Taylor.
+
+1997-07-30  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* libtool.m4 (AM_PROG_LIBTOOL): Explicitly check enable_shared and
+	enable_static rather than just enableval.  This allows
+	configure.in scripts to set their own defaults.  Suggested by
+	Tommy Reilly.
+
+1997-07-29  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in: Add NLS environment variable handling copied from
+	ltconfig.in.  Reported by Akim Demaille.
+	(link): If allow_undefined_flag is not supported, then turn on old
+	libraries.  Reported by Akim Demaille.
+
+	* demo/dlmain.c (main): Use dld_preloaded_symbol_count to display
+	a message about the sortedness of the symbol table.
+
+	* ltconfig.in (nlist): Use an nlist convenience variable, so that
+	code can be shared directly with ltmain.sh.in.
+
+	* ltconfig.in, ltmain.sh.in (dld_preloaded_symbol_count): Count up
+	the number of symbols in the dld_preloaded_symbols.  Set to `-1'
+	if the list wasn't both sorted and counted.  This allows
+	applications to do a quick binary search, if they are so inclined.
+
+1997-07-25  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Remove code for `-version-file', since it
+	has been long-deprecated.
+
+	Disable static linking if hardcode_direct is unsupported and there
+	is no working link_static_flag.  This provides correct behaviour
+	for all cases on AIX 3, regardless of whether collect2 is broken
+	or not.  Reported by Mark Kettenis.
+
+	* ltconfig.in: Fix typo in test polarity.  From Mark Kettenis.
+
+1997-07-24  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in (hardcode_direct): Set to `unsupported' if aix3 uses
+	a broken collect2.  Adapted out of test results from Mark
+	Kettenis.
+	(link_static_flag): Make sure the link_static_flag actually works
+	with a trivial binary.
+
+	* ltmain.sh.in, ltconfig.in (export_dynamic_flag_spec): Renamed
+	from export_dynamic_flag because we eval it in ltmain.sh.
+
+	* ltmain.sh.in (link_static): Don't eval link_static_flag.
+
+	* demo/dlmain.c (main): Change function prototype to be KNR
+	compatible.  From Kaveh R. Ghazi.
+
+	* ltmain.sh.in (link): Use no_builtin_flag.  This works around
+	conflicting definitions of builtin functions with at least GCC.
+	Reported by Kazuhiro Sasayama.
+
+	* ltconfig.in (no_builtin_flag): New flag to turn off builtin
+	functions when compiling an object file.
+	(pipe_works): Use it.
+
+	* tests/demo-exec.test (status): Use status variables so that we try to
+	execute all the programs.
+
+1997-07-23  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in (pic_flag): According to the libg++ 2.7.2 configure
+	script, DEC alpha CPUs are PIC-only, as well.  Reported by Kevin
+	Jacobs.
+
+1997-07-21  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in, ltmain.sh.in: Replace all occurances of "sed 'X;
+	Y'" with "sed -e 'X' -e 'Y'".
+
+	* ltmain.sh.in (link): Finish full integration for `-dlopen' and
+	`-dlpreopen'.
+
+	Fix two silly typos where I used a compile_command in place of a
+	finalize_command, and vice versa.
+
+	Change the wrapper script to check a hardcoded path only if the
+	argv[0] method fails.  This is a compromise for the previous two
+	patches, and should solve the majority of problems with wrapper
+	scripts.  From Kenneth Albanowski.
+
+	(link): Change a reference to hardcode_libdir_colon_separated to
+	use the new hardcode_libdir_separator variable.
+
+	* demo/Makefile.am (helldl_LDFLAGS): Add `-export-dynamic' and
+	`-dlpreopen' for building helldl.
+
+	* demo/dlmain.c (main): Succeed, even if none of the libhello
+	symbols have been preloaded.
+
+1997-07-20  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in (global_symbol_pipe): Add `U' to the accepted global
+	symbol types.  This means that we will get duplicate symbols, but
+	we'll also be sure to get all global symbols used by the program.
+
+	* ltconfig.in (pipe_works), ltmain.sh.in (link): Sort and make
+	symbol output unique.
+
+1997-07-19  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in (pipe_works): Check to make sure our guessed
+	global_symbol_pipe actually works.
+
+	* ltmain.sh.in (link): Revert change from Kenneth Albanowski.  The
+	wrapper scripts are more reliable when they just use the argv[0]
+	value.  Generally, when the argv[0] method doesn't work, the user
+	is trying to do something weird with an uninstalled binary, and
+	should try a different approach.
+
+	* ltconfig.in, ltmain.sh.in (CC): Always use `$CC' instead of
+	`$cc'.  This fixes a FreeBSD bug.  Reported by Chuck Robey, and
+	others.
+
+1997-07-14  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): In wrapper scripts, hardcode the current
+	directory to prevent phony argv[0] values from screwing up our
+	program.  From Kenneth Albanowski.
+
+1997-07-13  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Makefile.am (demo_distfiles): Add demo/dlmain.c to the
+	distribution.
+
+1997-07-12  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* demo/Makefile.am: Add helldl, made from dlmain.c, to demostrate
+	`-dlopen' usage.
+
+	* demo/dlmain.c: New file to demonstrate preloaded modules.
+
+	* ltmain.sh.in (link): Add `-dlopen' flag to preload dynamic
+	modules, even on static platforms.  Use `$NM' and
+	`$global_symbol_cmd' to extract symbols from required files.
+	(dlname): Delete dlname mode entirely.  It is rendered obsolete
+	because the `.la' file format is now a public interface.
+
+	* ltconfig.in (NM): New variable for BSD-compatible nm program.
+	(global_symbol_cmd): Pipeline to extract global symbols from the
+	nm output.
+
+	* ltmain.sh.in: The .la file header should depend on `ltmain.sh',
+	not `$PROGRAM'.
+	(link): Make sure $export_dynamic_flag is eval'ed before it is
+	used.
+
+	* tests/demo-exec.test, tests/demo-inst.test: Check the new
+	helldl program,	too.
+
+1997-07-11  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* libtool.spec: New Red Hat Package Manager specification file in
+	order to help people prepare distributions of libtool for Linux.
+
+	* ltmain.sh.in: Eliminate two accidental uses of the NONE magic
+	value.  These were breaking libtool's behaviour when no mode is
+	specified.
+
+	* tests/nomode.test: New test to make sure there is correct behaviour
+	when we don't specify a mode.
+
+1997-07-08  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Release 1.0.
+
+	* ltconfig.in: On SunOS, append /usr/etc to the PATH before
+	running ldconfig; on *BSD, append /sbin.  This was done in line
+	with the Linux change suggested by Kenneth Albanowski.
+
+	* demo/Makefile.am (hardcode_tests): Aesthetic change to
+	alphabetize order of compiling the hardcode tests.
+
+	* Makefile.am (EXTRA_DIST): Delete README-automake.
+
+	* README-automake: Remove from distribution.
+
+1997-07-02  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): In the executable wrapper, strip trailing
+	colons from the shlibpath_var because some ld.so's, notably
+	OpenBSD 2.0's (!), don't parse colon-terminated values correctly.
+	From Tim Pierce.
+
+1997-07-01  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in, ltconfig.in: Eliminate uses of the NONE magic
+	variable value.  Use an empty variable instead.
+
+	* ltconfig.in (with_gcc, with_gnu_ld): Do the tests for the C
+	compiler and linker if the variables are unset, or if they are not
+	GNU C and ld.
+	(RANLIB): Eliminate redundant `if' statement.
+
+	* configure.in: Use AM_PROG_LD.
+
+	* libtool.m4 (AM_PROG_LD_GNU): New macro to determine if LD is GNU
+	ld.
+	(AM_PROG_LD): Rename AM_PATH_PROG_LD to AM_PROG_LD.  Parameterize
+	so that the user can specify `--with-gnu-ld' or `--without-gnu-ld'
+	to indicate his preference.
+	(AM_PROG_LIBTOOL): Use it.
+
+1997-06-30  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Append /sbin to the path before running ldconfig on
+	Linux.  This helps superusers who haven't set their PATH
+	correctly.  Suggested by Kenneth Albanowski.
+
+	* tests/if.test: New test to make sure that we haven't forgotten to
+	follow an `if' statement with a `test' command.  This should avoid
+	the majority of hard-to-track bugs.
+
+1997-06-29  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in: Change all the `eval "$run ..."' sequences to
+	`$run "eval ..."'.
+
+	Change all `$ln_s ...' sequences to use `(cd /dir && $LN_S ...)'.
+	This is the sequence recommended by the Autoconf manual, and
+	should avoid any problems on older machines.  Eliminate all uses
+	of `cp -p'.  Reported by Akim Demaille.
+
+	(install): Use `test $# -gt 0' instead of `test -n "$1"'.
+
+	* ltconfig.in (LN_S): Add test to see if `ln -s' works.
+
+	* libtool.m4: Increment serial number, and require AC_PROG_LN_S.
+
+1997-06-26  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Add missing `test' statement.  Reported by
+	Akim Demaille.
+
+1997-06-24  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* libtool.m4 (LD): Consistently use ac_cv_path_ld instead of
+	am_cv_path_ld.  From Tim Pierce.
+
+1997-06-20  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in: Redo two robustness fixes.  Alexandre had the
+	correct approach, but I botched them.
+
+	* ltconfig.in (dynamic_linker): Disable shared libraries on
+	MkLinux unless GNU libc is in use.  Reported by Akim Demaille.
+
+1997-06-19  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (install): Add a missing `test' command.  Reported
+	by Joel Weber.
+	Miscellaneous fixes to improve robustness.  From Alexandre Oliva.
+
+	* tests/demo-conf.test (CONFIG_SITE): Set to /dev/null, so that the
+	config.site file doesn't mess up our prefix.  Reported by Joel
+	Weber.
+
+	* tests/demo-inst.test: Always run both hell.static and hell.
+
+	* tests/demo-conf.test: Always remove the local config.cache, but run
+	`make distclean' only if the Makefile exists.  Otherwise, the demo
+	directory is not cleaned up if a user uses their own config.cache.
+	Reported by Joel Weber.
+
+1997-06-14  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Create invalid libtool objects when partial
+	linking if we don't have PIC.  From Jeff Dairiki.
+	(install): Fix bug if libtool object is installed to a file name
+	without directory components.  From Jeff Dairiki.
+
+1997-06-13  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Makefile.am (demo/configure): Fix up rules to run autoconf.
+	(aclocal.m4): Now we depend on our own libtool.m4.
+
+	* configure.in (AM_PATH_PROG_LD): Use it.
+
+	* libtool.m4 (AM_PATH_PROG_LD): New macro to find the linker used
+	by the C compiler.
+	(AM_PROG_LIBTOOL): Use it.
+
+	* ltmain.sh.in (install, uninstall): Support installing and
+	uninstalling `.lo' files.  From Jeff Dairiki.
+
+1997-06-11  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Makefile.am (ltconfig, ltmain.sh): Only move if $(srcdir) is not
+	the current directory.  Don't regenerate every time the package is
+	reconfigured.  Reported by Tom Tromey.
+	(MAINTAINERCLEANFILES): Added ltconfig, ltmain.sh, so that
+	$(srcdir) is not messed with during a regular clean.
+
+1997-06-10  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Makefile.am (ltconfig, ltmain.sh): Be sure to move these files
+	into $(srcdir) once they are created.
+
+	* ltmain.sh.in (link): Disable building static libraries.
+	People should use their favourite AR and RANLIB commands.
+	Disable building old-style objects if `--disable-static' is
+	given.  Suggested by Tom Lees and Stephan Kulow.
+
+1997-06-08  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in (host_cpu, host_vendor, host_os): Patch up
+	definitions, to allow for the fact that the host_os may contain
+	hyphens (as in linux-gnu).  From Scott Goehring.
+
+	* ltmain.sh.in (link): Move the `dlname' setting closer to the top
+	of the file.  Suggested by David Mosberger-Tang.
+	Symlink the libtool archive into the `.libs' directory so that it
+	can be found by programs that want to find a library's dlname by
+	searching LD_LIBRARY_PATH.  Reported by David Mosberger-Tang.
+
+1997-06-06  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Tell people to report bugs to the new libtool mailing list,
+	<bug-libtool@gnu.ai.mit.edu>.
+
+1997-06-05  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in (allow_undefined_flag): New variable that implements
+	`-allow-undefined'.
+	(archive_cmds): Enable C++ constructors for FreeBSD 2.2.  From
+	David Nugent.
+
+	* ltmain.sh.in (link): Accept new `-allow-undefined' flag when
+	building libtool libraries.  This tells libtool to allow
+	unresolved symbols to exist in shared libraries.  Basically, this
+	turns off shared libraries on AIX.  Suggested by Ian Lance Taylor.
+
+1997-05-26  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* libtool.m4 (LD): On at least IRIX, many different flags need to
+	be propagated to the linker if they are part of the compiler
+	command line.  Reported by Anthony Green.
+
+1997-05-10  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Trivial port to FreeBSD 3.  From David Nugent.
+
+1997-04-25  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Remove all traces of `-whole-archive',
+	`-no-whole-archive', and libtool convenience libraries.  They were
+	more trouble than they're worth.  If these are ever reimplemented,
+	they need more careful attention to make portable.
+
+	* libtool.m4, ltconfig.in: Added a `--disable-static' flag to turn
+	off static library creation.  From Tom Lees (who finally convinced
+	me that it was the Right Thing to do).
+
+1997-04-22  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (hardcode_runpath_var, runpath_var): Use them, if
+	the linker has no -rpath flag.
+	Quote the values we use to set runpath_var and shlibpath_var.
+	(link): Use libobjlibs for libtool convenience libraries.
+
+	* ltconfig.in (hardcode_runpath_var, runpath_var): Add new
+	variables to describe linkers that honour `LD_RUN_PATH'.
+	(host_cpu, host_os): Use these more specific variables, rather
+	than the full canonical host system name.
+
+	* ltmain.sh.in (dlname): Distinguish between missing
+	`-export-dynamic' and when the library is only statically linked.
+
+1997-04-21  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Trivial port to OpenBSD by making it an alias for
+	NetBSD.  From Tim Pierce.
+
+1997-04-16  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Temporary measures to check for a broken collect2
+	program.  Right now, we just see if we're using GCC on AIX 3.
+
+	* tests/hardcode.test: AIX also has arbitrary limits on the line length
+	of input to fgrep(1), so we need to translate NUL characters to
+	newlines in order to properly detect embedded `.libs'.  From Bruno
+	Haible.
+	Also redirect stderr to /dev/null, so that AIX users don't get
+	worried by `fgrep: Maximum line length of 2048 exceeded.'.
+
+1997-04-13  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (mode): Use `egrep -e' when inferring the operation
+	mode.
+
+1997-04-12  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in (linker): Some GNU ld's don't accept `--version',
+	but do accept `-v'.  From Jukka Honkela.
+	(ld_shlibs): AIX lossage may be settling down.  AIX 3.2.5 ld does
+	*not* hardcode direct libraries, but AIX 4.1.[45] ld does.
+
+1997-04-07  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in (hardcode_action): Fix silly logic error.  From
+	Bruno Haible.
+
+1997-04-05  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (install): Relink if hardcode_action is `relink',
+	rather than using complex conditionals based on the other
+	hardcode variables.
+
+	* ltconfig.in (hardcode_action): Set to `relink', not `immediate',
+	if we can only hardcode existing directories.  Rearrange
+	conditionals to make the intent clearer, otherwise this can be one
+	hellish piece of code for the already-dizzy libtool maintainer.
+
+1997-04-02  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* replfunc.m4: Delete from the distribution.  Documentation now
+	describes how to set LTALLOCA and LTLIBOBJS in your own
+	configure.in.
+
+	* ltmain.sh.in (link): Make sure a libtool library only counts as
+	a shared library if its library_names are non-null.
+	Use timestamps for .lo's when PIC is turned off, rather than
+	symlinking to the real object.  This helps invalid mixtures of PIC
+	and non-PIC to fail.
+
+1997-04-01  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Makefile.am (EXTRA_DIST): Distribute libtool.prj.
+
+	* Shameless plug: Changed source code management system from CVS
+	to PRCS.
+
+	* libtool.scm: Initial Guile implementation of libtool.
+
+	* ltmain.sh.in: An unexpected inconsistency in my whole approach
+	to shared libraries has proven that libtool needs to be completely
+	rewritten if I'm going to give full shared library support for
+	platforms that don't use the GNU C library version 2 (which to my
+	knowledge currently only works on GNU Hurd and Linux/GNU systems).
+	Porting the GNU C library should not be difficult, though.
+
+	Platforms that don't have the dlopen(3) family of functions will
+	need to install GNU DLD version 4 in order to build any kind of
+	libraries at all.  Unfortunately, DLD 4 won't be released for a
+	while, because I maintain it, and I'm too busy working on libtool.
+
+	I'll keep the old ltconfig/ltmain.sh implementation around for as
+	long as I can, and continue applying bug fixes, so that I'll have
+	a reasonable starting point for this new libtool implementation.
+
+	It looks like this implementation will be even more complex than
+	the original (pre-0.7) libtool.  Initial estimates show that it
+	may be up to 3 times slower, and 5 times larger than libtool-0.9.
+	I'll probably have to rewrite it in Guile to get reasonable
+	performance, which will severely limit its portability for a
+	while.
+
+	That will also introduce a bootstrapping issue, since the next
+	release of Guile will use libtool to build shared libraries.  So,
+	if users want to have shared Guile libraries, they will have to
+	configure Guile with `--disable-shared', compile it, install it,
+	then reconfigure Guile with `--enable-shared' and repeat.
+
+	I was hoping to get libtool 1.0 out the door by early April, but
+	now it looks like it will take at least another year before it'll
+	be usable by the public at large.  April fools.  libtool.scm
+	doesn't exist yet, either.
+
+	* ltconfig.in (verify_host): Remove redundant `Transform *-*-linux*
+	to *-*-linux-gnu*'.  From Bruno Haible.
+
+	* tests/hardcode.test: AIX 3 doesn't have strings(1) so we need to do a
+	funny tr and pipe the output to fgrep.  From Bruno Haible.
+
+1997-03-31  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Makefile.am: Use the new AUTOMAKE and ACLOCAL variables.
+
+	* ltmain.sh.in (link): Only fail if a convenience library doesn't
+	exist, and the user specified -whole-archive.
+	Fix shell quoting that was breaking @OUTPUT@ substitution.
+
+1997-03-28  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Use the hardcode_libdir_separator.
+	Convenience libraries are libtool objects if we're not building
+	libtool libs.
+
+	* ltconfig.in (hardcode_libdir_separator): Added in case the
+	linker only honours the last of the -rpath flags (but it can
+	contain multiple colon-separated directories), such as on OSF/1.
+	Reported by Carl D. Roth.
+
+	* ltmain.sh.in (link): Set the dlname if -export-dynamic is given.
+	(install, uninstall): Handle the dlname file separately.
+
+	* ltconfig.in (export_dynamic_flag): Added to allow programs to
+	use reflexive dlopens.
+
+	* ltmain.sh.in: Include the mode name in any help messages.
+	(dlname): New mode to give the name to be used with dlopen(3).
+
+	* ltconfig.in (AR): Allow AR to be set by the user, and export it
+	to ltmain.sh.
+
+	* ltmain.sh.in: Remove broken profiled library support.
+	Added `-whole-archive' and `-no-whole-archive' to manipulate
+	convenience libraries.
+
+1997-03-27  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Allow the creation of static convenience
+	libraries made of libtool objects.  Suggested by David
+	Mosberger-Tang.
+
+1997-03-25  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: On AIX, libtool also needs to look for `B' symbols
+	in nm output.  These are global variable definitions.
+
+	* ltmain.sh.in: Linking with -static should link against the
+	linklib if old_library is empty (like it is on AIX).
+
+	* ltconfig.in: Change the order of OS detection, so that
+	linux-gnu* is detected before gnu*.
+
+	* Makefile.am (libtool): Use the correct CC, RANLIB, LD, when
+	generating libtool.  From Carl D. Roth.
+
+	* configure.in: Find out the user-supplied CC, LD, RANLIB.  From
+	Carl D. Roth.
+
+1997-03-24  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in: Linking with -static should link against the old
+	library, not linklib.
+
+	* README-automake: Updated to point to Automake 1.1m.
+
+1997-03-15  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* demo/main.c: Use it.
+
+	* demo/foo.h: Declare it.
+
+	* demo/foo.c: Added definition of `nothing' so that we have an
+	global variable definition, as well as functions.
+
+1997-03-12  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Make sure either enable_shared or enable_static is
+	configured.  Reported by Tom Tromey.
+
+	* ltmain.sh.in: Bomb out if no library types are configured.
+
+1997-02-22  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in, ltmain.sh.in (hardcode_libdir_flag_spec): Renamed
+	from `hardcode_libdir_flag'.
+	(library_names_spec): Renamed from `lib_names'.
+
+	* ltconfig.in, ltmain.sh.in (hardcode_action): Change value from
+	`rpath' to `immediate'.
+
+	* replfunc.m4: Add AM_FUNC_ALLOCA, AM_FUNC_MEMCMP, and
+	AM_STRUCT_ST_BLOCKS.
+
+1997-02-18  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Transform *-*-linux* to *-*-linux-gnu* to support
+	old-style config.guess scripts.
+
+1997-02-17  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in: Create objdir *before* linking a program into it.
+
+1997-02-12  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Any ld --version that returns GNU is probably a GNU
+	ld.  From Marcus Daniels.
+
+	* libtool.m4: Added AM_REPLACE_FUNCS.
+
+1997-02-11  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Trivial port to *-*-osf4.  From Bruno Haible.
+
+1997-02-10  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: AIX 3 and 4 ld only hardcodes LIBPATH if -L is not
+	specified.  This behaviour is the same with both xlc and gcc.
+
+1997-02-07  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* doc/platforms.texi: Yaay!  We found a workaround for HP-UX
+	/bin/sh buffer overflows.  From Eric Backus.
+
+1997-02-03  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Release 0.9.
+
+	* PLATFORMS, doc/platforms.texi, Makefile.am, doc/Makefile.am:
+	Move PLATFORMS to doc/platforms.texi.
+
+	* ltmain.sh.in (link): Use hardcode_libdir_flag to get a library
+	directory into the resulting binary.
+	Use hardcode_action, and make many simplifying changes to have
+	compilation and finalization be consistent with each other.
+
+	* ltconfig.in: Not so amazing!  It's AIX cc that hardcodes direct
+	libraries... gcc doesn't, though.
+	(link_rpath_flag): Change link_rpath_flag to be
+	hardcode_libdir_flag.
+	(hardcode_action): New variable to simplify ltmain.sh.
+
+	* tests/Makefile.am (TESTS): Do the full make sequence with
+	--disable-shared, then without.
+
+	* tests/demo-sttc.test: Configure the demo directory with
+	--disable-shared.
+
+1997-01-29  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in: Change to take advantage of linkers that don't
+	hardcode direct libraries.
+
+	* ltconfig.in: Amazing!  AIX 3 linker doesn't hardcode direct
+	libraries, which makes it less buggy than AIX 4.  Reported by Mark
+	Kettenis.
+
+	* demo/configure.in: Check for the math library.
+
+	* demo/foo.c (foo): Change to use the `cos' function, so that we
+	need to link against another library.
+
+	* tests/hardcode.test: Rewrite to use fgrep on output from ``strings
+	-a'' if using fgrep directly on the binary files fails.  From Mark
+	Kettenis.
+
+1997-01-28  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Export the PATH variable in order to find
+	the program, rather than giving a full path.  This helps give the
+	program a less confusing value for argv[0].
+
+	* tests/hardcode.test: Make sure that ../demo/libhello.la really is a
+	shared library before running hardcoding tests.
+
+1997-01-26  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Release 0.8.
+
+1997-01-24  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* Makefile.am (demo_distfiles): Add demo/acinclude.m4 to the
+	distribution.
+
+1997-01-22  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* libtool.m4: For IRIX 6, ld needs -n32 if cc uses it.  Reported
+	by Bruno Haible.
+
+	* ltconfig.in: IRIX ld does not hardcode direct libraries.
+	Reported by Bruno Haible.
+
+1997-01-18  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in, ltmain.sh.in (hardcode_shlibpath_var): Allow new
+	value, `unsupported', since most linkers do not allow you to use
+	shlibpath_var for initial linking.
+
+	* ltconfig.in: Lots of bug fixes from Bruno Haible.  Set wl on
+	OSF/1, fix definitions of hardcode_* variables.
+	(archive_cmds): Fix not to use +h on HP-UX 9.x.  Reported by Bruno
+	Haible.
+
+	* tests/demo-conf.test: Use the CONFIG_SHELL environment variable when
+	running configure in the demo directory.  From Bruno Haible.
+
+	* tests/Makefile.am (clean-local): Make distclean in the demo directory,
+	so that ``make clean; env CC=cc make check'' works as one would
+	expect.
+
+	* tests/demo-make.test: Fix typo (use $make instead of make).  Reported
+	by Akim Demaille.
+
+1997-01-17  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* libtoolize.in: Handle explicit AC_CONFIG_AUX_DIR settings.
+	Suggested by Akim Demaille.
+
+	* libtool.m4: Change ltconfig line to use $CONFIG_SHELL when it is
+	specified.  Reported by Bruno Haible.
+
+1997-01-16  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* demo/Makefile.am (hc-direct): Do better searching for the proper
+	name to do a direct link.
+	(hc-libpath): Make allowances if shlibpath_var cannot be used
+	to find libraries at link time, such as on AIX.
+
+	* Makefile.am (demo_distfiles): Remove ansi2knr.1 and ansi2knr.c.
+
+	* demo/foo.c, demo/hello.c, demo/main.c: Change ANSI prototypes to
+	KNR form, for better portability, and less ansi2knr hair.
+
+	* demo/configure.in: Remove AM_FUNC_PROTOTYPES.
+
+	* demo/Makefile.am: Remove ansi2knr from the AUTOMAKE_OPTIONS.
+
+	* demo/ansi2knr.1, demo/ansi2knr.c: Removed these files.
+
+	* ltmain.sh.in: Use 1>&2 consistently to direct errors and
+	warnings to stderr.
+	(compile): Fix missing single quote.
+
+	* ltconfig.in (hardcode_direct): On Solaris at least, using
+	DIR/libNAME.so does not hardcode DIR, so introduce a new hardcode
+	variable to reflect that.
+
+	* ltmain.sh.in (link): If linking with $link_static_flag fails,
+	then retry without it, but still use the .a versions of
+	uninstalled libtool archives.
+
+	* tests/tlibtool: Rewrote to grab all the settings from the generated
+	libtool script.
+
+	* tests/hardcode.test: Make allowances if shlibpath_var cannot be used
+	to find libraries at link time, such as on AIX.
+
+1997-01-15  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): Eval $link_static_flag.  Reported by Bruno
+	Haible.
+
+	* PLATFORMS: Add to distribution.  Suggested by Bruno Haible.
+
+1997-01-14  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* tests/demo-conf.test, tests/demo-inst.test, tests/demo-unst.test,
+	tests/hardcode.test:
+	Use $make instead of make.
+
+	* tests/defs (make): Add definition of $make that uses the $MAKE
+	environment variable, if set.  Suggested by Bruno Haible.
+
+	* tests/demo-unst.test (leftovers): Change the find command to ignore
+	files beginning with a dot, as egrep -v doesn't seem to do the
+	trick.  Reported by Bruno Haible.
+
+1997-01-13  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Add support for SCO OpenServer 5.x.  From
+	Christopher Olsen.
+
+	(can_build_shared): Initialize at the top of the file, so that
+	shared libraries aren't built on platforms that don't support
+	them.
+
+	* tests/hardcode.test: Added a test to make sure that libtool's idea of
+	hardcoding system linkers is correct.
+
+1997-01-11  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in, ltconfig.in, libtoolize.in, doc/libtool.texi:
+	Update the copyright completion years.
+
+1997-01-08  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: Port to IRIX 5.3, 6.2.
+
+1997-01-06  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltconfig.in: HP-UX 9 support is the same as HP-UX 10, so the
+	port is trivial.
+
+	* libtoolize.in: Add --dry-run option, -n for short.
+
+1997-01-03  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (link): On at least SunOS, /bin/sh doesn't
+	understand "export something=val".  From Bruno Haible.
+
+	* tests/Makefile.am (distclean-local): Remove all files that the tests
+	may have created.  Reported by Bruno Haible.
+
+	* For all tests, discover srcdir when running from the command
+	line.
+
+	* tests/demo-unst.test: Don't fail if make uninstall doesn't delete
+	files beginning with a dot, since spurious .nfsXXX files may be
+	present when running NFS.  Reported by Bruno Haible.
+
+1997-01-02  Gordon Matzigkeit  <gord@gnu.ai.mit.edu>
+
+	* ltmain.sh.in (compile): Recognize valid source file suffixes for
+	Fortran and C++.
+
+	* tests/suffix.test: New test to guarantee that libtool compile
+	recognizes valid source file suffices.
+
+Continued in ChangeLog.1996
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.1998 b/ChangeLog.1998
new file mode 100644
index 0000000..ca65524
--- /dev/null
+++ b/ChangeLog.1998
@@ -0,0 +1,1344 @@
+1998-12-31  Joseph Beckenbach III <jrb3@best.com>
+
+	* ltconfig.in: added support for BeOS
+	* ltmain.in (shlibpath_var): added a workaround for
+	  an odd bug in the BeOS R4 sed
+
+1998-12-31  Thomas Tanner  <tanner@gmx.de>
+
+	* verified all copyright notices
+	  and updated them to 1999
+	* TODO: added some things that need to documented
+	* doc/libtool.texi: -export-symbols is not
+	  supported on all platforms
+	* doc/PLATFORMS: added a few new platforms
+
+1998-12-30  Thomas Tanner  <tanner@gmx.de>
+
+	* NEWS: updated
+	* THANKS: added Todd Vierling <tv@pobox.com>
+
+1998-12-30  Todd Vierling  <tv@pobox.com>
+
+	* ltconfig.in: improved shared object handling on both
+	  a.out and ELF platforms for NetBSD
+
+1998-12-29  Thomas Tanner  <tanner@gmx.de>
+
+	* ltconfig.in: do not rely on a leading space when concatenating
+	  variables as suggested by Erez Zadok
+	* ltmain.in: likewise
+	* doc/PLATFORMS: updated and reformatted
+	  (thanks to Erez Zadok for the testing)
+
+1998-12-27  Thomas Tanner  <tanner@gmx.de>
+
+	* THANKS: added Erez Zadok <ezk@shekel.mcl.cs.columbia.edu>
+
+1998-12-26  Erez Zadok  <ezk@shekel.mcl.cs.columbia.edu>
+
+	* ltconfig.in: support i486-ncr-sysv4.3.03
+	shared libraries.
+
+	* ltmain.in: before every ln -s, remove the link name
+
+1998-12-25  Thomas Tanner  <tanner@gmx.de>
+
+	* depdemo/configure.in: removed last relics of demo
+	* depdemo/sysdep.h: ditto
+	* mdemo/Makefile.am: ditto
+	* libltdl/Makefile.am: fixed the version number, build libltdls if
+	  -enable-install and -enable-dlpreopen are enabled
+	* libltdl/configure.in: libltdl is version 0.1, not 1.0,
+	  renamed -enable-ltdl-install to -enable-install,
+	  conditionals for libltdls, check for strchr and index,
+	  replaced NULL with 0
+	* libltdl/ltdl.c: replaced NULL with 0, dlpreopen only if
+	  USE_DLPREOPEN was defined, integrated shl_load code from GModule
+	  (still untested)
+
+1998-12-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/configure.in: fixup spacing in --enable-ltdl-install
+	help string so that it lines up nicely for configure --help.
+
+	* ltmain.in (dllsearchpath): keep track of what the dll search path
+	will need to be in the wrapper scripts as deplibs are calculated.
+	Make sure the wrapper script doesn't end in `.exr', which makes
+	win32 try to execute it as a binary!
+	Add the contents of dllsearchpath to $PATH in the wrapper script.
+	Use the relative path to the wrapped program so that the dll
+	search path is calculated properly by win32 OSes.
+	* TODO: removed the item for making wrapper scripts work on win32.
+
+	* TODO: removed the reference to making libltdl and demo work on
+	win32.  They *do* work now that wrapper scripts are functioning.
+
+	* ltmain.in (file_magic_command): It turns out that if the
+	file_magic_command generates huge output (e.g. running `objdump
+	-f' over a large import lib [say libX11.a]) the expr to check it
+	against the file_magic_regex blows up.  There is now an optimistic
+	heuristic, to save only the first 10 lines of running
+	file_magic_command which (at risk of sounding like Bill) should be
+	enough for anyone =)O|.
+
+	* ltmain.in: Set the compile_dependencylibs and	dllsearchpath for
+	non-libtool libs, or else libdeps only works between ltlibs for
+	cygwin32.
+
+1998-12-23  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (SP2NL, NL2SP): use `tr' magic to avoid passing very
+	long lines to sed
+	* doc/libtool.texi (sed): very long lines are no longer a problem
+
+	* libltdl/Makefile.am: install libltdl conditionally...
+	* libltdl/configure.in: ... if --enable-ltdl-install is issued
+	* libltdl/ltdl.c: removed #ifdef DEBUG
+	* mdemo/Makefile.am (mdemo_debug_LDADD, mdemo_debug_DEPENDENCIES):
+	use libltdl.la
+
+1998-12-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/PLATFORMS: added my cygwin32 box (i686-pc-cygwin32).
+
+	* TODO: remind myself of the win32 tasks remaining.
+
+	* ltconfig.in (archive_cmds, archive_sym_cmds,
+	old_archive_from_new_cmds): Fixed a bug which left an a.exe in the
+	build directory.  Fixed a bug where $soname-def was never deleted.
+
+	* ltconfig.in (file_magic_command): new variable holds the command
+	(including any args) to run to generate the string to match
+	against the regex in $file_magic.  Use the variable where
+	necessary. Added to libtool header output.
+	(deplibs_check_method): use file_magic for win32, but compare the
+	output of `objdump -f' with the regex (see below).
+	(archive_cmds, archive_sym_cmds): use compile_dependencylibs for
+	each $CC invokation (see below).
+
+	* ltmain.in: Set allow_undefined to `no' for win32 variants by
+	default, otherwise it is impossible to link a dll without forcing
+	the makefile maintainer to figure out whether to pass
+	--no-undefined at every libtool invokation.
+	(compile_dependencylibs): save the list of dependency library
+	flags needed for a deplib build on win32.
+	(link_against_libtool_libs): commented out the check for this;  if
+	it is left in, then ltlibs (i.e. *.la files) cannot be deplibs for
+	subsequent links.
+	Don't add -lc to the deplibs line for win32 platforms (which don't
+	have a libc as such).
+	(file_magic_command): use this to get some output to compare with
+	the file_magic regex (instead of hardcoding `file' which doesn't
+	exist on win32.
+	* doc/libtool.texi (Porting inter-library dependencies): Updated
+	to document the changes above.
+
+	* ltconfig.in (deplibs_check_method): Changed the file_magic regex
+	to match more linux variants.  This is less lenient than Thomas
+	Tanner's commit to fix the same problem below.
+	Reported by Joel Klecker <espy@debian.org>
+	* THANKS: added Joel Klecker <espy@debian.org>
+
+1998-12-23  Thomas Tanner  <tanner@gmx.de>
+
+	* ltconfig.in: fixed file-magic for Linux shared libraries
+	* ltmain.in: removed the unused -force-static flag
+	* libltdl/ltdl.c: added strchr, search modules in LTDL_LIBRARY_PATH,
+	  check whether actual module was already dlopened,
+	  read in preload_libs rather than dependency_libs
+
+1998-12-23  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl/Makefile.am: build two versions of libltdl:
+	  libltdl (support native dlopen if available, otherwise dlpreopen),
+	  libltdls (like libltdl, but always support for dlpreopen)
+	* libltdl/ltdl.c: ditto
+	* libltdl/configure.in: warn if dlopen is not supported
+	* mdemo/Makefile.am (mdemo.debug): use libltdls
+
+1998-12-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in: revert Thomas Tanners change to create all
+	libraries without the `lib' prefix on win32, otherwise `gcc foo.c
+	-lbar' can't find libbar.a.
+
+1998-12-22  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* Makefile.am (SUBDIRS): prepend `.' to avoid am-recursive
+	dependency hack
+
+1998-12-21  Thomas Tanner  <tanner@gmx.de>
+
+	* ltconfig.in: indentation is now 8 character wide tabs
+	* ltmain.in: ditto
+	* ChangeLog: ditto
+	* ltmain.in: renamed check_shared_deplibs_method to
+	  deplibs_check_method (we_dont_want_too_long_variable_names :)
+	* doc/libtool.texi (Porting inter-library dependencies): ditto
+	* depdemo/.cvsignore: renamed hell* to depdemo*, added *.lo,*.la
+	* mdemo/.cvsignore: ditto
+
+1998-12-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AM_SYS_NM_PARSE): apparently  __ptr_t is predefined
+	on some systems - use lt_ptr_t instead.
+	* ltconfig.in: ditto.
+	* ltmain.in: ditto.
+
+	* libtool.m4 (AM_SYS_SYMBOL_UNDERSCORE): use an AC_SUBST to pass
+	the result of this into the compile rather than AC_DEFINE which
+	breaks when building with older versions of autoconf.
+	* ltconfig.in (symxfrm): Don't put the leading underscore back
+	with the global_symbol_pipe.
+	* demo/dlmain.c (main): No need to specialcase underscores in
+	dld_preloaded_symbols - it is fixed by symxfrm above!
+	* libltdl/configure.in: use AM_SYS_SYMBOL_UNDERSCORE from
+	libtool.m4 rather than reinvent the wheel here =)O|
+
+	* ltmain.in:  Fix deplibs methods to not rely on a.out (cygwin
+	uses a.exe!).
+
+	* libltdl/configure.in: Cleanups - fix header comment and emacs
+	local-vars.
+
+	* demo/dlmain.c (win32_force_data_import_address): a nasty hack
+	to force the address of imported data symbols into
+	dld_preloaded_symbols on win32, which does data imports
+	differently to function imports (sheesh!).  This functionality
+	needs to be moved into the dld_preloaded_symbols generation code.
+	demo/helldl with static linking is broken on win32 by this change,
+	probably until after libtool-1.3 =(O|
+	* demo/foo.h: make sure __CYGWIN32__ is always defined on cygwin32
+	systems.  Use the correct __declspec macro for lib exports/imports
+	on cygwin32.
+	* demo/foo.c, demo/hello.c: Make sure we tell foo.h that these
+	sources are inside libfoo, and want to export symbols.
+
+1998-12-20  Thomas Tanner  <tanner@gmx.de>
+
+	* autogen: configure demo, depdemo, libltdl and mdemo
+	* tests/mdemo-exec.test: renamed hell* to mdemo*
+	* tests/mdemo-inst.test: ditto
+
+1998-12-19  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl/Makefile.am: build a normal libtool library
+	* libltdl/ltdl.c: get LTDL_LIBRARY_PATH but don't make use of it yet,
+	  some reformatting
+	* ltmain.in: fixed a bug which listed symbols in
+	  dld_preloaded_symbols twice
+	* TODO: removed symbol export lists and deplibs
+
+1998-12-18  Thomas Tanner  <tanner@gmx.de>
+
+	* ltconfig.in: added need_lib_prefix and need_version,
+	  which determine whether we must prefix modules with 'lib'
+	  and whether versioning is required for libraries.
+	* ltmain.in: allow modules names without 'lib' prefix,
+	  new -avoid-versioning option
+	* doc/libtool.texi (link flags): updated documentation for -module,
+	  added -avoid-versioning
+	* doc/libtool.texi (libtool script contents):
+	  documented the two new flags and archive_sym_cmds
+	* doc/libtool.texi (tests):
+	  added (partially very short) documentation for assign.test,
+	  nomode.test, quote.test, sh.test
+	* libltdl/ltdl.c: canonicalize module names,
+	  some cleanups and bugfixes,  __ptr_t is predefined on
+	  some systems - use lt_ptr_t instead
+	* mdemo/: renamed hell* to mdemo* (hell is already used in
+	  demo), updated the documentation, import sin and cos in main
+	  program rather than linking libfoo1 statically
+
+1998-12-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AM_PROG_LIBTOOL): Added AC_PREREQ(2.12) to prevent
+	people using libtool with old autoconfs that don't provide the
+	features we need.
+
+1998-12-16  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* NEWS, configure.in, libtool.spec: Bumped to 1.2e for CVS
+
+	* NEWS, configure.in, libtool.spec: Bumped to 1.2d for release
+
+	* Makefile.am (cvs-dist): our release tags are in lower case
+	(cvs-diff): ditto
+	(EXTRA_DIST): added README-alpha
+	* README-alpha: minor adaptations
+	* demo/Makefile.am, mdemo/Makefile.am, depdemo/Makefile.am:
+	removed comment about special needs for distribution
+	* depdemo/Makefile.am: don't generate dependencies
+	* depdemo/configure.in: modified version number
+
+	* ltmain.in (-force-static, force_static): removed
+	* libltdl/Makefile.am (CFLAGS): ditto
+	* libltdl/configure.in: check for memory.h, rindex() and
+	dlpreopening.  Fixed NEED_USCORE caching policy.
+	* libltdl/ltdl.h (lt_dlsym): make the name argument const
+	* libltdl/ltdl.c (types): new variable: head of list of available
+	dlopening mechanisms
+	(lt_dltype_t): interface of a dlopening mechanism, with pointers
+	to functions for init, exit, open, close and sym
+	(lt_dlhandle_t): added pointer to interface type
+	(strdup): don't name it strdup; it can be troublesome
+	(strrchr): ditto; use rindex if available
+	(LIBTOOL_STATIC): check HAVE_DLPREOPEN instead, and move to the
+	end of the file, so that it becomes the header of the list
+	(all): renamed all interface-implementation functions, to avoid
+	name clashes, and created lt_dltype_t nodes for all of them
+	(lt_dlinit): initialize all available interfaces; remove those
+	that fail from the list.  Return failure only if no interfaces
+	could be initialized.
+	(lt_dlexit): return number of failures
+	(tryall_dlopen): try to open the library with all available
+	interfaces
+	(lt_dlopen): use tryall_dlopen; increased size of fixed buffers.
+	We should probably make these bound-checked or dynamically
+	allocated for the final release!  Fix bug when filename did not
+	contain slashes; should we check for `\\' too?  Try old_library if
+	everything else fails.
+	(lt_dlclose): use the interface type for closing
+	(lt_dlsym): make `symbol' const, use interface type for looking up
+	* mdemo/Makefile.am: moved mdemo/modules/* back into mdemo
+	(SUBDIRS): removed
+	(libfoo2_la_LDFLAGS): added -static; nice test.  However, since it
+	causes -lm to linked into hell*, it causes tests that should fail
+	to pass
+	(noinst_HEADERS): no need to install foo.h
+	* mdemo/configure.in: remove modules/Makefile
+	tests/mdemo-exec.test: updated accordingly
+
+	* NEWS: Added Thomas Tanner and Gary V. Vaughan to the list of new
+	maintainers.  Detailed expected failures of libltdl+mdemo.  Listed
+	recent ports.  Added full URL for the home page.  Note that
+	libtool C program is unusable.
+
+1998-12-16  Bruno Haible  <haible@ilog.fr>
+
+	* doc/libtool.texi (Tested platforms): broken `sed' programs
+
+1998-12-16  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* THANKS: added Stephan Kulow; removed Gary V. Vaughan and Thomas
+	Tanner, now that they're AUTHORS
+
+1998-12-16  Stephan Kulow  <coolo@kde.org>
+
+	* ltmain.in (freebsd-aout, freebsd-elf): added missing dot to
+	versuffix
+
+1998-12-16  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/Makefile.am (EXTRA_DIST): removed, nothing needed
+	(libtool): automatically update
+
+	* libltdl/configure.in (stdlib.h, unistd.h, stdio.h): check
+	* libltdl/ltdl.c: include them
+
+	* demo/configure.in (BINARY_HELLDL): test whether dlopen is
+	supported at configure time
+	* demo/Makefile.am (helldl): use automake conditionals to build
+	helldl as a script or as a binary program
+
+	* tests/Makefile.am (EXTRA_DIST): remove ltdl-*.test
+	(clean-local): don't clean libltdl any more
+	* tests/ltdl-conf.test: removed
+	* tests/ltdl-inst.test: ditto
+	* tests/ltdl-make.test: ditto
+	* tests/ltdl-unst.test: ditto
+	* tests/mdemo-make.test: updated accordingly
+	* tests/mdemo-inst.test: ditto
+	* tests/mdemo-unst.test: ditto
+	* doc/libtool.texi: ditto
+
+	* ltmain.in (-DSTATIC): changed to -DLIBTOOL_STATIC, and defined
+	only for -force-static; it should be removed soon, before people
+	start to use it
+
+	* configure.in (AC_CONFIG_SUBDIRS): added libltdl
+	* Makefile.am (SUBDIRS): build libltdl by default
+	(DIST_SUBDIRS): simplify distribution of demo and mdemo
+	(libtool, clibtool, libtoolize, ltconfig, ltmain.sh): add
+	srcdir where appropriate
+	(ACINCLUDE_M4_LIST): new rule for maintaining links from
+	acinclude.m4 to libtool.m4
+	(*demo/Makefile.in): don't update autoconf/automake files any
+	more; make check is needed
+
+1998-12-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (archive_cmds): tweaked for cygwin b18->b20.1
+	compatibility and fixed a bug with generating the export
+	definitions file.  This is only tested on b20.1, but should
+	work back to b18 at least.
+
+1998-12-11  Thomas Tanner  <tanner@gmx.de>
+
+	* ltmain.in: -module implies now -export-dynamic,
+	  dlpreopen files if we're linking statically
+	* doc/libtool.texi (link flags): added documentation for -module
+	  and the tests for mdemo and libltdl
+	* mdemo/Makefile.am: replaced -dlpreopen with -dlopen
+
+1998-12-09  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* PORTING: removed the text Akim Demaille converted to .texi
+
+1998-12-09  Akim Demaille  <demaille@inf.enst.fr>
+
+	* doc/libtool.texi: converted inter-library dependencies
+	instructions from PORTING
+
+1998-12-09  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (convenience, deplibs): propagate dependencies
+	* libltdl/Makefile.am (noinst_HEADERS): don't install ltdl.h yet
+	(noinst_LTLIBRARIES): ditto for libltdl.la
+
+1998-12-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* README-alpha: adapted the release procedure from
+	  automake/HACKING.
+	* Makefile.am: adapted the cvs-dist and cvs-diff rules from
+	  automake/Makefile.am.  I guess this is probably safe to use
+	  already, but I didn't test it as it tags the CVS tree.  If
+	  it needs tweaking, we'll find out come 1.2d.
+
+1998-12-08  Thomas Tanner  <tanner@gmx.de>
+
+	* ltconfig.in: fixed some typos in archive_sym_cmds
+	* ltmain.in: replaced basename with a sed expression
+
+1998-12-07  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* configure.in: we no longer use PRCS
+
+	* doc/libtool.texi (author): listed all the AUTHORS
+	(Dlopen issues): added reference to libltdl, still undocumented
+	(C++ libraries): it's not *that* simple, after all :-(
+	(Inter-library dependencies): they're back!
+
+1998-12-04  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (ac_cv_sys_symbol_underscore): `test a == b' doesn't
+	work, use `test a = b' instead
+
+	* Makefile.am (mdemo_distfiles): libfoo[12].sym no longer exist
+
+	* ltconfig.in (solaris): do not use $CC for linking if GNU ld is
+	not available
+
+1998-12-04  Manfred Weichel  <Manfred.Weichel@pdb.siemens.de>
+
+	* ltconfig.in: Port to SCO UnixWare 7.x.
+
+1998-12-03  Thomas Tanner  <tanner@gmx.de>
+
+	* ChangeLog: converted CR/LF back to CR format
+	* ltconfig.in: new variable sys_lib_search_path for searching
+	of installed libraries, export archive_sym_cmds and
+	sys_lib_search_path
+	* ltmain.in: use sys_lib_search_path, removed extradeplibs
+	(they're not portable)
+
+1998-12-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/configure.in: look for string.h or else strings.h, and
+	also check for ANSI strrchr() function.  Fix `undescore before
+	symbols' macro to not rely on a.out (cygwin uses a.exe!).  Fix
+	`underscore for dlsym' to set cache variable properly, not just in
+	environment of AC_DEFINE(NEED_USCORE).
+	* libltdl/ltdl.h (__ptr_t): for K&R compatibility using char*.
+	* libltdl/ltdl.c (strrchr): fallback function incase none is
+	defined in libc.
+	(trim, ltdlopen): replace rindex with ANSI strrchr.
+	Add static function declarations so that we get type checking with
+	ANSI compilers.  Use __ptr_t instead of void*.
+
+1998-12-01  Thomas Tanner  <tanner@gmx.de>
+
+	* ltconfig.in: added -export-symbols support for GNU ld and
+	Solaris (untested), archive_sym_cmds for -export-symbols
+	* doc/libtool.texi, ltmain.in: -export-symbols is now
+	independent from -export-dynamic and does not work for modules
+	anymore
+	* ltmain.in: added some checks for -export-symbols
+	* mdemo/modules/Makefile.am: replaced -export-symbols with
+	-export-dynamic since it doesn't work for modules
+
+1998-12-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* README: Updated homepage pointer to gnu libtool page.
+
+	* ltconfig.in (ltdll.c): update the ltdll.c file for cygwinb20.
+	Based on code from Mumit Khan <khan@xraylith.wisc.edu>.
+	(archive_cmds): correct typo libtool.c->ltdll.c.  Update shell
+	commands for cygwin32.
+
+	* libtool.m4 (AM_SYS_SYMBOL_UNDERSCORE): New macro; find out
+	whether compiled symbols have an extra leading underscore.
+	(AM_SYS_NM_PARSE): New macro (converted to m4 from ltconfig.in);
+	find a sed expression to parse global symbols from the output of
+	$NM.
+	(AM_PROG_LIBTOOL): require AM_SYS_NM_PARSE and
+	AM_SYS_SYMBOL_UNDERSCORE.
+	* demo/dlmain.c (main): Remove a single	leading underscore from
+	compiled symbol names if necessary.
+
+1998-12-01  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* config.guess, config.sub: imported from autoconf pre-2.13
+
+1998-11-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool (AM_PROG_LD): Oops... we need to know the host_os for
+	the changes below.  I'm not sure whether mingw32 and os2 support
+	UNC paths, if they did we wouldn't need the check, we could use
+	UNC paths on all three; or if the bug with $LD not being
+	shell-meta escaped was fixed, we could use '\\' separators on all
+	three. AC_REQUIRE'ed AC_CANONICAL_HOST.
+
+	* libtool.m4 (AM_PROG_LD): Cannonicalize the absolute path for the
+	ld program;  The order is funny to provide canonicalization to
+	paths with '\\' separators as well as '/'.
+	* ltconfig.in: ditto.
+
+	* AUTHORS: Added myself as a co-maintainer.
+
+	* ltconfig.in (archive_cmds): The `;\' in a compound statement is
+	expanded wrongly for cygwin32, mingw32, aix3 and aix4. Changed to
+	`;'.
+
+1998-11-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.spec (URL): point to www.gnu.org
+	(Source): point to ftp.gnu.org
+
+	* Makefile.am (EXTRA_DIST): removed libtool.prj
+	Reported by Akim Demaille <demaille@inf.enst.fr>
+
+1998-11-24  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (echo): avoid shell error messages when we're
+	testing for large command line support
+	Reported by Axel Thimm <Axel.Thimm@physik.fu-berlin.de>
+
+	* doc/PLATFORMS: updated last-tested release for platforms I've
+	got access to
+
+	* THANKS: added Chris P. Ross
+
+1998-11-24  Chris P. Ross  <cross@eng.us.uu.net>
+
+	* ltconfig.in: added recognition of the dynamic linker on BSD/OS 4.x
+	* README: added BSD/OS 4.x to the list of supported platforms
+	* doc/PLATFORMS: added BSD/OS 4.x support for various host id's
+
+1998-11-24  David Heine  <dlheine@truffle.Stanford.EDU>
+
+	* ltmain.in (pass_all): actively pass the flags
+
+1998-11-24  Thomas Tanner  <tanner@gmx.de>
+
+	* depdemo: added inter-library dependencies demo (doesn't work yet!)
+	* AUTHORS: added myself to the list of maintainers
+
+1998-11-22  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl: added support for .la files, LGPL license,
+	K&R compatibility, some API changes and bugfixes
+	* ltmain.in: renamed -module flag (for compiling) to -force-static,
+	define -DSTATIC when compiling static .o files,
+	do not include directories in dld_preloaded_symbols
+	* mdemo: modified mdemo to work with the new libltdl
+	* tests/mdemo-exec.test, tests/mdemo-inst.test: use .la files
+
+1998-11-21  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c: replace NULL with 0, so that we don't depend on
+	header files defining it.
+
+	* ltconfig.in (archive_cmds, osf3, osf4, solaris, sunos4): create
+	libraries with gcc -shared if using gcc without GNU ld.
+
+	* ltconfig.in: replaced occurrences of solaris2 with solaris, to
+	prepare for Solaris 7
+
+1998-11-19  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* mdemo/Makefile.am (hell_debug_LDFLAGS): -dlpreopen -> -dlopen
+	(hell_LDFLAGS): added -export-dynamic and -dlopen
+	(SUBDIRS, INCLUDES): added modules directory
+	(foo1.c, foo2.c, foo.h, libfoo1.sym, libfoo2.sym): moved to modules
+	* Makefile.am: ditto
+	* tests/mdemo-exec.test, tests/mdemo-inst.test: libraries moved
+	* mdemo/modules/Makefile.am: new file
+
+	* */Makefile.am (AUTOMAKE_OPTIONS): added no-dependencies
+
+	* ltmain.in: missing `test' between `&&' and `"$module"'
+
+	* ltconfig.in (echo_test_string): the whole ltconfig script was
+	too much for DU4.0's ksh, but the first 50 lines will be enough.
+
+	* ltmain.in (installed): new variable defined within a .la file,
+	so that libtool can now link already-installed libraries into a
+	program.
+	* NEWS: ditto
+	* doc/libtool.texi (Linking executables): document it
+
+	* ltmain.in (output_objdir): compute it from $output, not $arg
+
+	* tests/mdemo-inst.test (libltdl): install it
+	* tests/mdemo-unst.test (libltdl): uninstall it
+	* tests/Makefile.am (TESTS): list ltdl-unst.test before mdemo-conf.test
+
+1998-11-18  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* NEWS: -module and libltdl
+	* mdemo/Makefile.am: ../libltdl is within $(srcdir)
+
+1998-11-18  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl, Makefile.am: added libltdl (a system independent
+	dlopen wrapper library extracted from mdemo)
+	* ltmain.in: added -module flag for compiling and linking of
+	modules. If enabled it compiles always both .o (with -DLT_RENAME)
+	and .lo files
+	* mdemo: modified mdemo to work with libltdl
+	* tests/ltdl*: added tests for libltdl
+
+1998-11-16  Steve Price  <sprice@hiwaay.net>
+
+	* ltconfig.in: when $host_os is freebsd[23]* determine whether
+	the current linker format is a.out or ELF
+	* ltmain.in: add two new $version_type's, freebsd-aout and
+	freebsd-elf, to support above change
+
+1998-11-16  Stephan Kulow  <coolo@kde.org>
+
+	* ltconfig.in: extent no_builtin_flag to contain -fno-rtti and
+	-fno-exceptions in case we compile with a gcc, that supports
+	this options (egcs and gcc >= 2.8)
+
+1998-11-16  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (C_compiler): copy $CC before it is overwritten with
+	command-line compiler, so that we can use it to compile C sources
+	generated during the build.  This fixes the problem that showed up
+	with -export-dynamic of C++ programs in egcs 1.1.
+	* NEWS: ditto
+
+1998-11-12  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* PORTING: Porting instructions are in the libtool manual already
+
+	* NEWS: Mention -export-symbols and new dlpreopen
+
+1998-11-11  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (IFS): revert Gary's patch when parsing version
+	information; we still use `:' here :-)
+
+	* NEWS: updated
+	* PORTING: new file, with general instructions and inter-library
+	dependencies tips
+
+1998-11-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in: make use of '~' field separator in reload_cmds,
+	old_archive_from_new_cmds, old_archive_cmds, archive_cmds,
+	old_postinstall_cmds, postinstall_cmds, old_postuninstall_cmds,
+	postuninstall_cmds and finish_cmds, so that the semi-colons inside
+	if/then/else/fi and for/do/done etc. do not break the eval loop in
+	ltmain.in (below).
+	* ltmain.in: changed all of the eval loops to use an IFS of `~',
+	to allow differentiation between the end-of-statement-;
+	(now `~' is used) and end-of-substatement-; (still `;').  This
+	fixes AIX and win32 at least.
+
+1998-11-11  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (sunos*, sympat, symxfrm): remove underscore
+	prepended by the compiler
+
+1998-11-10  Toshio Kuratomi  <badger@prtr-13.ucsc.edu>
+
+	* ltconfig.in: re-enable deplibs
+	* ltmain.in: support deplibs, at least for GNU/Linux/x86
+	Updated to current libtool by Thomas Tanner  <tanner@gmx.de>
+
+1998-11-10  Gordon Matzigkeit  <gord@trick.fig.org>
+
+	* ltmain.in (link): Make the relink warning less harsh.
+
+1998-11-07  William M. Perry  <wmperry@aventail.com>
+
+	* ltconfig.in (aix3, aix4): uniquify symbol names in archive_cmds
+
+1998-11-07  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in: add --falback-echo, to be used if everything else
+	fails.  The tests now check the behavior of $echo for very large
+	strings, because some echo commands would just core dump (e.g.,
+	Solaris' printf).  If too large strings fail, smaller ones are
+	tested.
+	(ltecho): arrange that, if the --fallback-echo method is selected,
+	echo will be defined in the libtool script so as to re-run itself,
+	not ltconfig
+	* ltmain.in: add --fallback-echo
+	(qecho) ensure that, if --falback-echo is being used, qecho is
+	defined with the full pathname of the libtool script
+
+	* tests/sh.test (test X): ensure that the double-quote supposed to be
+	reported is really reported
+
+1998-11-07  Thomas Tanner  <tanner@gmx.de>
+
+	* mdemo/main.c: removed hardcoded library names; link against -lm
+	* tests/mdemo-exec, tests/mdemo-inst: pass the library names
+	to the program
+
+1998-11-07  Marc J. Fraioli  <fraioli@dg-rtp.dg.com>
+
+	* README: Added DG/UX
+	* doc/PLATFORMS: ditto
+
+1998-11-04  Michael Tiemann  <tiemann@cygnus.com>
+
+	* ltconfig.in (irix6): it's a little bit different from irix5
+
+1998-11-04  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* THANKS: Added Thomas Tanner and Gary V. Vaughan
+
+	* ltconfig.in, ltmain.in: updated and fixed the patches below
+
+1998-11-04  Thomas Tanner  <tanner@gmx.de>
+
+	* mdemo/*: added new demo to demonstrate building of dlopenend
+	modules
+	* tests/Makefile.am, tests/mdemo*: added some tests for mdemo
+
+1998-11-04  Gary V. Vaughan  <gary@gnu.org>
+
+	* demo/configure.in: added AC_EXEEXT macro so that the tests can
+	work on cywin32/mingw32 hosts.  This requires the current CVS
+	autoconf
+
+1998-11-04  Thomas Tanner  <tanner@gmx.de>
+
+	* ltmain.in: New flag -export-symbols; new dlpreopen system
+	* demo/dlmain.c: removed dld_preloaded_symbol_count
+
+1998-11-04  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltmain.in: On installation, don't get confused if the same name
+	appears more than once in the list of library names.
+
+1998-11-04  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltconfig.in: Add objext and libext variables.  Check for object
+	suffix.  Check for mingw32* as well as cygwin32*.  Use objext when
+	testing compiler.  Add support for Visual C++ on cygwin32 when not
+	using gcc.  Add objext, libext, and fix_srcfile_path to generated
+	libtool script.
+	* ltmain.in: Use .${objext} rather than .o.  Use fix_srcfile_path
+	if it is set.  Check for .obj as well as for .o, and for .lib as
+	well as for .a.  Use .${libext} rather than .a when creating old
+	libraries.
+	* libtoolize.in: Change initial /bin/sh to @SHELL@.
+	* libtool.m4 (AM_PROG_LIBTOOL): Add AC_REQUIRE for
+	AC_CANONICAL_BUILD, so that autoconf doesn't get mixed up by the
+	AC_REQUIRE in AC_CHECK_TOOL.
+
+1998-11-04  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltconfig.in: Look in the right directory for libtool.c in
+	archive_cmds for cygwin32.
+
+1998-11-04  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltconfig.in: Fix cygwin32 support to avoid using a double
+	extension, to delete the def file, to set version_type to windows,
+	and to include versuffix in the DLL name.
+	* ltmain.in: Add support for a version_type of windows.
+
+1998-11-04  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltconfig.in: Add cygwin32 support.
+	* libtool.m4 (AM_PROG_LIBTOOL): Call AM_SYS_LIBTOOL_CYGWIN32 on a
+	cygwin32 host.  Pass DLLTOOL and AS to ltconfig.
+	(AM_SYS_LIBTOOL_CYGWIN32): New macro.
+
+1998-11-04  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (sco): fix typo
+
+1998-11-04  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltconfig.in: On AIX, don't treat GNU ld specially.
+
+1998-11-04  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (hardcode_minus_L): Revert Ian's patch for
+	ltconfig.in.  Although -L hardcoding is not used with GNU ld, it
+	does happen, so hardcode_minus_L must be set to yes.
+
+	* ltconfig.in (compiler_o_lo): check whether we can write directly
+	to a .lo
+
+	* ltmain.in (compiler_o_lo): if not, write to .o and rename it
+
+1998-11-04  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltconfig.in: For sunos4 using GNU ld, set hardcode_minus_L to
+	no.
+	* ltmain.in: Add some hacks to make SunOS --enable-shared work
+	when using GNU ld.
+
+1998-11-04  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* THANKS: Added Marc J. Fraioli
+
+1998-11-04  Marc J. Fraioli  <fraioli@dg-rtp.dg.com>
+
+	* ltconfig.in (dgux): new supported platforms
+
+1998-11-04  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (need_locks): if neither `-c -o' nor hard links are
+	available, fallback to not so safe mechanism, by setting
+	need_locks to warn
+	* ltmain.in (need_locks): when need_locks is set to warn, use the
+	lockfile to try to fail in case of incorrect concurrent builds
+
+	* THANKS: Added Eric Estievenart
+
+1998-11-04  Eric Estievenart  <eric@via.ecp.fr>
+
+	* doc/libtool.texi (Compile mode): Document that -o is fully
+	supported.
+
+	* libtool.m4 (libtool-lock): new ARG_ENABLE; sets (need_locks)
+	* ltconfig.in (disable-lock): control need_locks
+	(hard_links): check whether hard-links can be used for locking
+	* ltmain.in (need_locks): use $output_obj.lock for locking
+
+1998-11-03  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in: correctly create libraries and programs with
+	directory components in their names
+
+1998-11-03  Eric Estievenart <eric@via.ecp.fr>
+
+	* ltmain.in (output_obj): typo
+
+1998-11-02  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltconfig.in: For sunos4, add ${libname}.so$versuffix to
+	library_names_spec.
+	* ltmain.in: For version_type of sunos, set versuffix even if
+	-version-info was not used.
+
+1998-11-02  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (libobj): default value must not contain directory
+	components
+
+1998-11-02  Eric Estievenart <eric@via.ecp.fr>
+
+	* ltconfig.in (compiler): detect if the compiler supports
+	-c and -o flags, create a variable compiler_c_o. Also issue
+	a big warning if it is not supported
+
+	* ltmain.in (compile): enable the -o option as input for libtool.
+	The objects are not moved if the compiler supports -o with -c.
+	Sources and objects can contain relative directories.
+	(link): enable the linking of executables into relative directories
+
+1998-11-02  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* AUTHORS: added myself as a co-maintainer
+	* THANKS: and removed my name from here
+
+	* autogen: new script; run it to bootstrap libtool after checking
+	it out from CVS
+
+	* libtool.m4 (CFLAGS): check whether -belf is needed on SCO, as
+	suggested by Robert Lipe <robertl@dgii.com>
+
+1998-10-31  Gordon Matzigkeit  <gord@trick.fig.org>
+
+	* demo/Makefile.am (hc-libpath): Use parameters from the libtool
+	in the top build directory, since the one in the demo directory is
+	not guaranteed to exist.
+
+1998-10-27  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* demo/Makefile.am (objdir): there are no longer quotes around
+	objdir in the libtool script
+
+1998-10-27  Gordon Matzigkeit  <gord@trick.fig.org>
+
+	* ltconfig.in (dynamic_linker): Echo the result to fd 6, so that
+	--silent works correctly.  From William M. Perry.
+
+1998-09-24  Gordon Matzigkeit  <gord@trick.fig.org>
+
+	* ltmain.in (link): Fix problems when building only static
+	libraries.  From Owen Taylor.
+
+1998-08-20  Gordon Matzigkeit  <gord@trick.fig.org>
+
+	* ltmain.in (install): When library_names_spec has redundancies,
+	avoid deleting the main library when installing symlinks.  From
+	Jeff Dairiki.
+	(link): Get rid of backticks in a here doc comment.
+	This causes segfaults on Solaris 2.  From Aleksandar Bakic.
+	(finish): Don't display messages
+
+	* ltconfig.in (archive_cmds): On HP-UX 9, make sure we don't try
+	to move a file to itself.  From Jeff Dairiki.
+
+1998-08-19  Gordon Matzigkeit  <gord@trick.fig.org>
+
+	* ltconfig.in: Make changes to accomodate ltmain.c.
+
+	* Makefile.am (clibtool): New target for the C version of libtool.
+
+	* ltmain.c: Experimental C version of libtool.
+
+1998-07-10  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltmain.in (install): Test against both $SHELL and /bin/sh.
+
+1998-06-30  Gordon Matzigkeit  <gord@trick.fig.org>
+
+	* ltmain.in: Convenience archive support.  From Ulrich Drepper.
+
+	* ltconfig.in (postinstall_commands): Change libraries to be
+	executable on Solaris in order to prevent ldd from moaning.  From
+	Julian Gosnell.
+	(whole_archive_flag_spec): New variable to shortcut convenience
+	archive expansion.  From Ulrich Drepper.
+
+1998-06-11  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in, ltmain.in: Change globs to accept forward slashes
+	in absolute directory names used on DOS-like systems.  From Robert
+	S. Maier.
+
+Thu May 28 18:59:08 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltconfig.in: Use $SHELL when invoking shell scripts.
+
+1998-05-21  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in (compile): Don't have `-static' turn off libtool
+	libraries, so that people can use it just to guarantee that `.o'
+	files exist.  Suggested by David Mosberger-Tang.
+
+1998-05-18  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in (link): Possibly reexec the shell from within the
+	wrapper script.
+	Allow `-version-info' and `-release' to coexist again.  If people
+	want to shoot themselves in the foot, I'd better let them do so,
+	so that people who are smart enough not to can squeeze out another
+	ounce of functionality.  From Tim Janik.
+	(version_vars): Delete dead variable.
+
+	* ltconfig.in (hardcode_minus_L): FreeBSD 3.0 doesn't hardcode, at
+	last.  Reported by Jason Nordwick.
+
+	* libtoolize.in, ltconfig.in, ltmain.in: Change a bunch of `if
+	test ...; then : ; else ...' constructs to `if test ! ...; then
+	...', for clarity.
+
+1998-05-17  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in (LC_ALL, LANG): Save these values and restore them
+	during execute mode.  From Pavel Kankovsky.
+	(mode): Accept strace and truss as programs that throw us into
+	execute mode.  From Pavel Kankovsky.
+
+1998-05-07  Ian Lance Taylor  <ian@cygnus.com>
+
+	* ltconfig.in: Don't use .$versuffix or .$major.  Instead, assume
+	the variable will include any required prefix.
+	* ltmain.in: If no -version-info option was used, produce empty
+	version strings rather than 0.0.0.  When making library symlinks,
+	avoid making a symlink if the name would be the same.
+
+1998-04-27  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in (link): Support `unsupported' as a hardcode_action.
+	Reported by Lars Hecking.
+	(lib_linked): Do some sanity checking to make sure that we
+	actually do link libtool libraries into the program to prevent the
+	above problem from happening again.
+
+1998-04-20  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in: Maybe reexec under $SHELL, if $echo doesn't work.
+	Reported by Lars Hecking.
+
+1998-04-19  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* Makefile.am (maintainer-rekey): New rule to force us to change
+	Project-Version after we make a release.  This keeps all version
+	numbers in sync, rather than branching just before the release.
+	(maintainer-release, maintainer-checkin): Use maintainer-rekey.
+
+	* ltmain.in (finish): Notice when a finish command fails, so that
+	we can add it to the list of recommendations.
+
+1998-04-17  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* libtool.m4 (AM_PROG_LIBTOOL): Append file descriptor 5 to
+	config.log, so that configure doesn't clobber the messages that
+	ltconfig put there.  From David Taylor.
+
+1998-04-15  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in (archive_cmds): Try using `$CC -shared' when
+	configuring for GCC under irix5 and irix6.  From Wolfram Gloger.
+	(ofile): Add `--output' flag to change the name of the generated
+	libtool.  Suggested by Wolfram Gloger.
+
+1998-04-14  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in: Remove all hardcoded references to ltmain.in in
+	favour of $PACKAGE and $PROGRAM.
+	(install): Compute the installation name for programs, in case we
+	install a relinked file which has a different name.  Reported by
+	Pieter Schoenmakers.
+
+	* ltconfig.in (echo): Try using the ksh(1) `print -r' builtin
+	command, before reverting to printf(1).
+
+	* Makefile.am (libtool): Use $(SHELL) when invoking ltconfig.
+
+	* ltconfig.in (echo): Rewrite the test for a working echo so that
+	we win on Solaris by avoiding printf(1), if possible.
+
+	* tests/quote.test (echo): Update the echo test from ../ltconfig.in.
+
+1998-04-13  Ian Lance Taylor  <ian@cygnus.com>
+
+	* libtool.m4 (AM_PROG_NM): Don't override NM in the environment.
+
+1998-04-13  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in: New `--config' flag to print out all configured
+	variables.
+
+	* libtool.m4: Pass ltconfig the undocumented --no-reexec flag,
+	since we call it explicitly using CONFIG_SHELL.
+
+	* ltconfig.in: Restart the script under a different shell if
+	CONFIG_SHELL is not /bin/sh.  This way, people can use Bash if
+	they don't have a working echo program.
+
+	* ltmain.in, ltconfig.in: Use $SHELL instead of /bin/sh when
+	generating executable scripts.
+
+	* libtoolize.in, ltconfig.in, ltmain.in: Implement the `--debug'
+	flag to begin shell tracing.
+
+	* ltconfig.in (archive_cmds): Don't use `gcc -shared', even if we
+	have GNU ld.  Reported by Robert S. Maier.
+
+1998-04-06  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in (pic_flag): Create more than just a null C file, so
+	that the SunPRO 4.2 cc doesn't complain.  From Bob Friesenhahn.
+	(gnu_ld_acts_native): Delete this variable.  There is just too
+	much version skew to try to pretend GNU ld is the same as the
+	system ld.  Reported by Ian Lance Taylor.
+	(hardcode_action): Don't bother relinking or aborting on systems
+	that are too dynamic to have a consistent hardcode method.
+	Reported by Doug Winterburn.
+
+1998-03-24  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* doc/libtool.texi: A little proofreading.  From Albert
+	Chin-A-Young.
+
+1998-03-23  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in: Treat HP-UX 11 just like HP-UX 10.  From Jeff Law.
+
+1998-03-21  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in (reload_flag): Correct a tiny bug where `--silent'
+	would still print out the reload flag.  From Stephan Kulow.
+
+1998-03-20  Ian Lance Taylor  <ian@cygnus.com>
+
+	* libtool.m4: Use changequote to avoid problems with square
+	bracket patterns.
+
+1998-03-20  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* Release 1.2.
+
+1998-03-18  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in: Rearrange some of the echos to make them more
+	consistent.
+
+1998-03-14  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in: Break up an echo command that causes Solaris printf
+	to dump core.  Apparently the Solaris people hardcoded a 2110-byte
+	buffer into their printf(1).  Feh.  From John Judge.
+
+1998-03-11  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in: Change the test for the PIC compiler flag so that
+	we assume it doesn't work if there are any warning messages.  This
+	fixes a bug using old GCC's on HP-UX.  Reported by Akim Demaille.
+
+1998-03-10  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
+
+	* Makefile.am ($(srcdir)/ltconfig): Remove bogus command to create
+	a file ltconfig in the build directory.
+
+1998-03-09  Andreas Schwab  <schwab@issan.informatik.uni-dortmund.de>
+
+	* ltmain.in: Avoid unnecessary use of command substitution,
+	replacing foo=`eval \\$echo \"$mumble\"` by eval foo=\"$mumble\".
+
+	(link): Use ${1+"$@"} in wrapper scripts in order to pass
+	arguments safely to a program.
+
+	* ltconfig.in: Use -fpic instead of -fPIC if $host_cpu matches
+	m68*.
+
+1998-03-08  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* Release 1.1.
+
+	* ltmain.in: <sigh> I like `here documents' a lot, but apparently
+	they are so badly handled by old and buggy /bin/sh's, that
+	replacing `cat <<EOF ... EOF' by `$echo "..."' improves libtool's
+	speed by a factor of 5.  So, I've eliminated here docs from the
+	all-important ltmain.in.  From Tom Lane.
+
+	* tests/tlibtool: Eliminate from distribution.
+
+	* tests/defs (libtool): Don't use tlibtool anymore, since we can now use
+	the generated libtool directly.
+
+1998-03-07  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in: Copy the contents of ltmain.sh into the generated
+	libtool.  This should more than halve the execution times on old
+	or buggy /bin/sh systems, such as HP-UX 9 and SunOS 4.1.4.  From
+	Tom Lane.
+
+1998-03-05  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* libtool.m4 (AM_ENABLE_SHARED, AM_ENABLE_STATIC): Add support for
+	the `default' package, so that people can control unnamed
+	packages.
+	(LD): Only add an ABI flag under IRIX 6.x, since IRIX 5.x doesn't
+	support them.  From Alexandre Oliva.
+
+1998-03-01  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in: Port to UnixWare 2.x.  From Christopher Olsen.
+
+1998-02-25  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in (compile): For consistency, honour the `-static' flag
+	during compilation.
+
+1998-02-23  Brendan Kehoe  <brendan@cygnus.com>
+
+	* libtool.m4 (AM_ENABLE_SHARED, AM_ENABLE_STATIC): For
+	--enable-shared, heed the value of $PACKAGE from AM_INIT_AUTOMAKE
+	if given as the argument for the library to be built shared.
+
+1998-02-20  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* libtool.m4, ltconfig.in (NM): Fix up a typo confusion between
+	$ac_dir and $dir.  Reported by Akim Demaille.
+
+	* ltmain.in (link): Don't allow both `-version-info' and
+	`-release'.  Reported by Danny Backx.
+
+1998-02-18  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* Makefile.am (noinst_SCRIPTS): Remove lineno from distribution.
+
+	* lineno: Remove from distribution, as it is no longer needed.
+
+	* Makefile.am ($(srcdir)/ltconfig.in, $(srcdir)/ltmain.sh):
+	Rewrite these rules not to use config.status or lineno.  This
+	makes things simpler, and reduces dependencies, so that the
+	scripts are rebuilt and installed in srcdir only when necessary.
+	Reported by Stephan Kulow.
+
+	* tests/sh.test (scripts): Remove the lineno script, since it is no
+	longer distributed.
+
+	* tests/assign.test, if.test, test-e.test: Even though 15 tests looks
+	impressive, these are now redundant.  Remove them from the
+	distribution.
+
+	* tests/sh.test: Do what assign.test, if.test, and test-e.test used to
+	do.
+
+1998-02-16  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* libtool.m4, ltmain.in, ltconfig.in: Correctly identify absolute
+	directory names on MS-DOS.  Suggested by Bob Friesenhahn.
+
+	* ltconfig.in, ltmain.in, libtool.m4: Change a bunch of `sed N!d'
+	commands to `sed Nq', for efficiency.
+
+	* ltmain.in: Only egrep the first few lines of files in order to
+	determine if they were libtool-generated.  This prevents egrep(1)
+	from taking forever to look at a 10MB binary on Solaris.  From
+	Stephan Kulow.
+
+	* tests/defs: Correctly identify absolute directory names on MS-DOS.
+	Suggested by Bob Friesenhahn.
+
+1998-02-11  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in (no_undefined_flag): Add a flag to declare under
+	Solaris that the library should not have any undefined
+	references.  Suggested by Bob Friesenhahn.
+
+	* ltmain.in (mkdir): Fix one more mkdir race.  From H.J. Lu.
+
+1998-02-08  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in, ltmain.in (striplib, old_striplib): Ditto.
+
+	* ltconfig.in (profile_flag_pattern): Get rid of dead code.
+
+1998-02-07  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* libtool.m4 (AM_ENABLE_SHARED, AM_ENABLE_STATIC): New macros to
+	modify the `--enable-shared' and `--enable-static' defaults in the
+	configure script.  This works a lot better than the old
+	`enable_shared' and `enable_static' variables did.  Reported by
+	Bob Friesenhahn.
+
+	* tests/suffix.test (extensions): Added GNAT (GNU Ada Translator)
+	suffices, `.ada', `.ads', `.adb'.  From Samuel Tardieu.
+
+1998-02-07  Samuel Tardieu  <sam@inf.enst.fr>
+
+	* ltmain.in: Recognize .ada, .ads and .adb as known suffixes (they
+	are used by GNAT, the GNU Ada compiler).
+
+1998-02-06  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in: Turn on IRIX shared libraries again!
+
+	* libtool.m4 (LD): Use file(1) to discover which ABI we're using
+	on IRIX, and propagate the correct linker flag.  From Jim Wilson.
+
+	* ltconfig.in, ltmain.in (Xsed): `arg=-n; echo "$arg" | sed ...'
+	gives problems, because the `-n' is interpreted as an option to
+	echo(1).  So, use `echo "X$arg" | sed -e 's/^X//' ...' everywhere,
+	via the $Xsed convenience variable.  Suggested by H.J. Lu.
+
+1998-02-02  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in: Turn off IRIX shared library support until 32-bit
+	and 64-bit ABI differences can be resolved.
+
+1998-01-28  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* libtool.m4 (LD): Reverse yesterday's change because `-old_ld'
+	isn't accepted by GCC.
+
+1998-01-27  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in (soname_spec): Add in user-specified release numbers
+	for every host system that supports an soname that differs from
+	the linkname.
+
+	* libtool.m4 (LD): Add `-old_ld' to the list of flags that need to
+	be passed through on SGI.  Reported by Chris Lee.
+
+	* ltmain.in (release): Prepend a hyphen to the release number, and
+	fix a typo because `-version-info' takes only 3 args.  From
+	H.J. Lu.
+
+1998-01-25  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in (library_names_spec): On Linux, use the
+	user-specified release.
+
+	* ltmain.in (link): Allow the user to specify a release number for
+	the library using the `-release' flag.  Suggested by H.J. Lu and
+	Ian Lance Taylor.
+
+1998-01-23  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* tests/Makefile.am (TESTS_ENVIRONMENT): Export some important
+	environment variables.  Reported by Ian Haggard.
+
+1998-01-19  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in (old_postuninstall_cmds): Reorder so that chmod
+	happens after ranlib.  From Markus F.X.J. Oberhumer.
+
+	* ltmain.in (mode): Added `gcc*' and `*-gcc*' to the patterns that
+	recognize compilers.  From Pieter Schoenmakers.
+	(link): Recognize `.a' files again.  Suggested by Pieter
+	Schoenmakers.
+
+1998-01-18  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in (compile): Recognize `.asm' extension, for use with
+	the nasm assembler.  From Markus F.X.J. Oberhumer.
+
+	* tests/suffix.test (extensions): Recognize `.asm'.  From Markus
+	F.X.J. Oberhumer.
+
+1998-01-12  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltconfig.in (runpath_var): Use instead of
+	`hardcode_runpath_var'.
+
+1998-01-11  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in (finish): Add a better --finish message.  Suggested by
+	Kenneth Albanowski.
+
+	* ltconfig.in, ltmain.in: Fix a few typos.
+
+1998-01-03  Gordon Matzigkeit  <gord@profitpress.com>
+
+	* ltmain.in (link): Quote the definition of $echo in the wrapper
+	script.
+
+	* ltconfig.in (export_dynamic_flag_spec): Use `--export-dynamic'
+	instead of `-export-dynamic', which is not accepted by all GNU
+	ld's.  From Eiichi Takamori.
+
+	* ltmain.in (install): Don't print silly `library stripping'
+	warnings.  Reported by François Pinard.
+
+Continued in ChangeLog.1997
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.1999 b/ChangeLog.1999
new file mode 100644
index 0000000..ccabba9
--- /dev/null
+++ b/ChangeLog.1999
@@ -0,0 +1,3505 @@
+1999-12-18  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* ltmain.in: Oops, `largarg' -> `lastarg'.
+
+	* ltmain.in (-Wc, -Xcompiler): Implemented in compile mode.
+
+	* ltmain.in (-Xcompiler, -Xlinker): Add to compile_command and
+	finalize_command.
+	(-Wc, -Wl): Likewise.
+
+	* tests/quote.test: Adjust quoting style of -Wl.
+
+	* ltmain.in: Oops, `echo' -> `$echo'.
+
+	* ltmain.in (-Wl, -Wc): Make commas argument separators, just like
+	in gcc.
+
+	* ltmain.in (libtool_args): Get all arguments properly enclosed in
+	quotes and backslash-protected when needed.
+
+1999-12-16  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* ltdl.m4: Renamed from...
+	* libltdl/ltdl.m4: that no longer exists.
+	* configure.in (ACINCLUDE_M4_LIST): Removed libltdl/acinclude.m4.
+	* Makefile.am (aclocal_macros): Added ltdl.m4.
+	(libltdl/acinclude.m4): Concatenate libtool.m4 and ltdl.m4.
+	* bootstrap: Likewise.
+	* libltdl/Makefile.am (ACLOCAL): Remove the definition.  Relying
+	upon -I may lead to duplicates.
+	* doc/libtool.texi: Suggest appending ltdl.m4 to acinclude.m4.
+	* libtoolize.in: Check AC_LIB_LTDL version number in aclocal.m4.
+
+	* libltdl/configure.in (with_auxdir): Do not use it as the
+	argument of AC_CONFIG_AUX_DIR, automake requires a literal here.
+	Use AC_CONFIG_AUX_DIRS/DIR_DEFAULT instead.
+
+	* libltdl/Makefile.am (ACLOCAL): Define with `-I .', as in
+	bootstrap.
+
+1999-12-15  Thomas Tanner  <tanner@ffii.org>
+
+	* libltdl/configure.in: path to auxiliary files can be specified
+	  using --with-auxdir (idea by Howard Chu <hyc@highlandsun.com>)
+
+	* ltmain.in: don't remove multiple occurences from dependency_libs
+	  of a library, otherwise many dependencies would get lost
+
+	* bootstrap: use "aclocal -I ." instead of adding the contents
+	  of ltdl.m4 to acinclude.m4
+
+1999-12-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: updated.
+	* libltdl/Makefile.am: Use -no-undefined for dll compliance.
+	* libltdl/configure.in: Use AC_LIBTOOL_WIN32_DLL for dll
+	compliance.
+	* libltdl/ltdl.c: Define and use LTDL_GLOBAL_DATA to correctly
+	export global data symbols from libltdl.dll.
+	* libltdl/ltdl.h: Define and use LTDL_SCOPE to declare data
+	symbols as dllexport, dllimport or plain ornary extern depending
+	in the context in which it is used.
+
+	* doc/libtool.texi (Distributing libltdl): document use of
+	ltdl.m4.
+	* libltdl/configure.in: Removed header checks, as they are
+        automatically performed by AC_LIB_LTDL.
+	* libltdl/ltdl.m4: Added header checks from configure.in, so that
+	AC_LIB_LTDL is sufficient to compile ltdl.c.
+	Reported by Stephan Kulow <coolo@kde.org>.
+
+	* ltconfig.in (ltdll_obj): fixed typo: objdir -> $objdir
+
+1999-12-12  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (cygwin*, mingw*, export_symbols_cmds): keep any
+	DATA tags associated with symbols by recent dlltool.
+	(cygwin*, mingw*, archive_expsym_cmds): Honor any DATA tags
+	found in the symbol list.
+	Reported by Jon Leichter <jon@symas.com>.
+
+1999-12-10  Gary V. Vaughan  <gary@gnu.org>
+
+	From Stephan Kulow <coolo@kde.org>
+	* libltdl/ltdl.m4:  Add arg 3 to AC_DEFINE's to save the user
+	from having to hack acconfig.h.
+
+1999-12-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Updated.
+	* TODO: Note some cleanups that are now needed.
+	* libltdl/configure.in: Use the new macroised tests.
+	* libltdl/ltdl.m4: New file, macroised tests formerly in
+	libltdl/configure.in.
+	Reported by Stephan Kulow <coolo@kde.org>.
+
+	From Tim Mooney  <mooney@dogbert.cc.ndsu.NoDak.edu>
+	* ltconfig.in:  split off the osf3 section, so that the osf4 and
+	osf5 sections can add `-msym' to arguments passed to the linker
+	for shared libs.
+
+1999-12-03  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* ltconfig.in (ac_compile): Use $ac_ext instead of .c.
+	(ac_link): Likewise.
+	(dlfcn.h, ac_try): Do not add filename, it is already in
+	ac_compile.
+	Reported by Stephane Conversy <Stephane.Conversy@lri.fr>
+
+	* ltconfig.in (linux-gnu*): Disable hardcode_into_libs until it
+	works together with fast_install.
+
+	* libtool.m4: Use host when --target is not specified.
+
+	* configure.in: AC_SUBST variables that are used by ltconfig to
+	build libtool.
+
+	* ltconfig.in (irix6*): Do not override deplibs_check_method
+	here.
+
+	* libtool.m4: Do not AC_SUBST anything other than LIBTOOL.
+
+1999-11-20  Michael Forster  <email@michael-forster.de>
+
+	* ltconfig.in (linux-gnu*): Set hardcode_into_libs=yes.
+
+1999-11-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in:  Be friendlier to C++ compilers when testing
+	for dlopen support.
+	Reported by Stephan Kulow <coolo@itm.mu-luebeck.de>
+
+1999-11-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4:  better use of $target instead of $host to support
+	cross compilation.
+	Reported by Sam Latinga <slouken@devolution.com>
+
+1999-11-16  Thomas Tanner  <tanner@ffii.org>
+
+	* configure.in: generate ltconfig and ltmain.sh before configuring
+	  libltdl
+
+1999-11-04  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* tests/sh.test: New test to detect uses of quotes within
+	backticks within quotes.
+	* ltconfig.in, ltmain.in: Fix detected errors.  Mark false
+	positives with a comment that disables the detector.
+	Reported by Akim Demaille <akim@epita.fr>
+
+	* configure.in: Move ltconfig and ltmain.sh generation back...
+	* Makefile.am: here.
+
+1999-11-02  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: updated
+	* THANKS: added Olly Betts and Pavel Roskin
+	* doc/libtool.texi: fix typo
+
+	* fix major bugs which rendered libtool virtually
+	  unusable (i.e. not portable):
+	* ltconfig.in: don't hardcode system dependent variables in ltconfig!!
+	  but set sane defaults
+	* Makefile.am: pass variables from AC_LIBTOOL_SETUP to ltconfig
+	* libtool.m4: ditto, fix typo in AC_PROG_LD_RELOAD_FLAG
+
+	* ltconfig.in: use old_deplibs for archives, too
+	  remove second occurence of sysv5
+	* ltmain.in: fix typo, fix the second occurence of -DPIC, too
+
+	* libltdl/Makefile.am: increment version number, fix typo
+	* libltdl/ltdl.c (lt_dlsym): don't report an error if the
+	  libltdl-style symbol name wasn't found
+
+1999-11-02  Wolfgang Rapp <ulris@bn-ulm.de>
+
+	* ltconfig.in: add support for Unixware (sysv4.2uw2*)
+
+1999-10-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in:  Damnit!  Cygwin cvs committed all the
+	dos line endings.
+
+1999-10-28  Stephane Conversy  <Stephane.Conversy@lri.fr>
+
+	* ltmain.in (-DPIC):  changed the order of pic flags a little to
+	prevent upsetting the sgi c++ compiler.
+
+1999-10-28  Olly Betts  <olly@muscat.co.uk>
+
+	* ltconfig.in (opt_cr):  Handle crlf sequences output by the
+	mingw toolchain.
+
+	* libtool.m4:  Third time lucky, with Tor's patch.
+
+1999-10-19  Tor Lillqvist  <tml@iki.fi>
+
+	* libtool.m4:  these was a missing `*' in the -mno-cygwin
+	match.
+	* ltconfig.in (cygwin, ltdll_obj): fixed a quoting error.
+	(export_symbols_cmds): added missing cosmetic newline.
+
+1999-10-18  Tor Lillqvist  <tml@iki.fi>
+
+	* libtool.m4: test command used == which should be =.
+	Support -mno-cygwin flag for building mingw32 dlls.
+	* ltconfig.in (file_magic_cmd): add missing quotes.
+	(deplibs_check_method): and here.
+
+1999-10-16  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* libltdl/ltdl.c (lt_dlopen): Do not search paths when the
+	specified library is not just a basename.
+
+1999-10-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_PATH_FILE): new macro replaces
+	AC_PATH_TOOL_GREP_OUTPUT.
+	(AC_PATH_TOOL_PREFIX): new macro replaces
+	AC_PATH_PROG_GREP_OUTPUT.
+	(AC_LD_RELOAD_FLAG):  migrated from ltconfig.in.
+	(AC_DEPLIBS_CHECK_METHOD): ditto.
+	* ltconfig.in (reload_flag): moved to libtool.m4.
+	(deplbs_check_method): ditto.
+
+1999-10-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_PATH_PROG_VERSION_GREP): removed in favour of the
+	more general AC_PATH_PROG_GREP_OUTPUT.
+	(AC_PATH_TOOL_VERSION_GREP): removed in favour of the more general
+	AC_PATH_TOOL_GREP_OUTPUT.
+	(AC_PROG_LIBTOOL):  Search for a working find program in the
+	user's PATH using the new macros.
+
+1999-10-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: updtaed.
+        * ltconfig.in: Accept osf5.
+        Reported by Sascha Schumann <sascha@schumann.cx>
+
+1999-10-04  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in (-no-install):  This doesn't work on win32 since
+	the search path for libraries is not encoded in the binary,
+	and dlls not in $PATH won't be found.  Fall back to -no-fast-install
+	instead.
+
+	* ltmain.in (-no-fast-install):  Wrapper script used to add the
+	exeext on again when naming the wrapped executable.
+
+1999-10-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in:  Set $FILE to @FILE@ for substitution with
+	the value found in libtool.m4 at configure time.
+	* libtool.m4 (AC_PATH_TOOL_GREP_VERSION):  New macro, combines
+	AC_PATH_PROG and AC_CHECK_TOOL with a test which greps the
+	output of $ac_dir/${ac_prefix}<tool> --version for a
+	given regex.
+	(AC_PATH_PROG_GREP_VERSION):  New macro used by the above.
+	(AC_LIBTOOL_SETUP): Use the new macros to search the PATH
+	[starting at /usr/bin] for a file program which accepts
+	--version and has "file" in its --version output.
+
+1999-10-03  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: new -no-install flag
+	* configure.in: fix typo
+	* doc/libtool.texi(Link mode): document -no-install flag,
+	  correct -no-fast-install docs
+	* libtool.m4: check for "file" command
+	* ltconfig.in: don't hardcode /usr/bin/file, remove second
+	  definition of sysv5, replace linkopts -> linker_flags
+	* ltmain.in: add new -no-install flag, print help for -no-install
+	  and -no-fast-install flags
+
+1999-10-03  Olly Betts <olly@muscat.co.uk>
+
+	* ltmain.in: always create output_objdir
+
+1999-10-03  Pavel Roskin  <pavel_roskin@geocities.com>
+
+	* libltdl/Makefile.am: don't preserve file attributes when
+	  installing the libltdl sources
+
+1999-10-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.in (AC_OUTPUT_COMMANDS): generate ltmain.sh
+	* Makefile.am (ltmain.sh ltconfig): removed.  Automake inserts the
+	rules to automatically call config.status.
+
+	* libtool.m4: be sure to AC_SUBST values no longer tested in
+	ltconfig.in.
+	* ltconfig.in: replaced several of the simple feature tests with
+	substitutions from config.status.
+	* Makefile.am (ltconfig): generate ltconfig with config.status.
+	* configure.in (AC_OUTPUT): generate ltconfig with config.status.
+
+1999-09-30  Donald Anderson  <dda@world.std.com>
+
+	* ltconfig.in (sco3.2v5): use pass_all deplibs_check_method
+	for SCO3.2.
+
+1999-09-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (whole-archive-flag-spec):  I had been
+	wondering why my file system was filling up with empty
+	files named `71'... seems I forgot to hold in the
+	shift key when redirecting stderr, 2>&1.  Doh!
+
+1999-09-29  Vadim  <vadim@olly.ru>
+
+	* ltconfig.in (sysv):  More UW7 support.
+
+1999-09-28  Albert Cheng  <acheng@ncsa.uiuc.edu>
+
+	* ltmain.in (shlibpath_var): ensure the variable is non-empty before
+	exporting it.
+
+1999-09-27  Manfred Weichel  <weichel@global.nacamar.de>
+
+	* ltconfig.in (sysv5): Added support required for shared
+	library linking on SCO UW7.
+
+1999-09-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (whole-archive-flag-spec): test whether the
+	version of GNU ld being used understands --whole-archive
+	before using it.
+
+1999-09-19  Thomas Tanner  <tanner@ffii.org>
+
+	* ltmain.in: don't ignore convenience libraries for objects/archives
+	  (temporary hack)
+
+1999-09-14  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* ltconfig.in (CDPATH): Set to `:' instead of empty.
+	* ltmain.in (CDPATH): Likewise.
+	Reported by Greg McGary <gkm@eng.ascend.com>
+
+1999-08-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (ltdll.c, impgen.c): Prevent the shell from
+	expanding variables & backslash escapes when writing these
+	files to the libtool script.
+
+1999-08-24  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: mention fixes
+	* doc/PLATFORMS: GNU/Hurd update
+	* depdemo: make use of variables
+	* ltconfig.in: use CC -E when checking for ELF support
+	  on NetBSD (reported by Todd Vierling <tv@pobox.com>),
+	  replace all occurences of 'linkopts' with 'linker_flags'
+	* ltmain.in: move ltdll.c and impgen.c to ltconfig.in and
+	  only add them to the libtool script if it's necessary
+
+1999-08-24  Boyd Gerber  <gerberb@zenez.com>
+
+	* ltconfig.in: add support for UnixWare 7.X.X
+	* doc/PLATFORMS: add new platforms
+
+1999-08-24  Pavel Roskin  <pavel_roskin@geocities.com>
+
+	* doc/libtool.texi: document use of noinst_LTLIBRARIES for
+	  convenience libraries
+
+	* ltconfig.in: check for freebsdelf3, not just freebsd3.
+	Set hardcode_into_libs=yes for FreeBSD 3.0 and 3.1
+
+	* ltmain.in: enable workaround for freebsdelf3.0
+
+1999-08-24  Bert Driehuis  <bert_driehuis@nl.compuware.com>
+
+	* ltconfig.in: export_dynamic_flag_spec is -rdynamic on BSD/OS
+
+1999-08-07  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/COPYING.LIB: Update to version 2.1.
+	* libltdl/ltdl.h, libltdl/ltdl.c: Update FSF address.
+
+1999-08-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (mingw*, AC_PROG_LD): use tr for carriage return
+	stripping.
+	* ltconfig.in: ditto.
+	From Olly Betts <olly@muscat.co.uk>
+
+1999-08-02  Olly Betts  <olly@muscat.co.uk>
+
+	* doc/libtool.texi (Compile mode): typo correction.
+	(Link mode): and another.
+	(Release numbers):  and another.
+	(Distributing libltdl): and another.
+	(Test descriptions): and another.
+	(libtool script contents): and one more.
+
+	* libtool.m4 (AC_PROG_LD): strip carriage returns from the
+	output of gcc -print-prog-name=ld.
+	* ltconfig.in: ditto.
+
+1999-07-30  Pavel Roskin  <pavel_roskin@geocities.com>
+
+	* ltmain.in: Ensure that gcc on HPsUX uses -fPIC, or else
+	initialised structures are sometimes emitted in the code section.
+
+1999-07-30  Mumit Khan  <khan@xraylith.wisc.edu>
+
+	* ltconfig.in:  Read line at a time to avoid tokenisation by
+	shell.
+
+1999-07-29  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in: Fix creation of relative links to object files in
+	sub-dirs.
+
+1999-07-29  Olly Betts  <olly@muscat.co.uk>
+
+	* ltconfig.in(cygwin mingw32, archive_expsym_cmds): Only compile
+	and link ltdll.c if the libtool.m4 macros discovered that it is
+	required.
+
+1999-07-26  Olly Betts  <olly@muscat.co.uk>
+
+	* libtool.m4(cygwin mingw32, AC_LIBTOOL_SETUP): Oops.  Fix some
+	typos made by Evil Gary while (mis)applying my patch :-).
+
+	* libtool.m4(cygwin mingw32, AC_LIBTOOL_SETUP):  On second
+	thoughts, only probe for -mdll vs -dll on mingw, and revert to
+	the old `-Wl,--dll -nostartfiles' on cygwin.
+
+1999-07-24  Erez Zadok  <ezk@cs.columbia.edu>
+
+	* doc/PLATFORMS (i*86-*openbsd2.5):  New platform.
+	Slight reordering of other bsd entries.
+
+1999-07-24  Olly Betts  <olly@muscat.co.uk>
+
+	* NEWS: Note new user visible changes.
+	* libtool.m4 (mingw32, AC_LIBTOOL_SETUP): probe for -mdll vs -dll
+	under cygwin/mingw.
+	probe whether the cygwin/mingw library supplies a stub DllMain
+	(but this information isn't yet used).
+	* ltconfig.in (mingw32, extract_expsyms_cmds): if HOST_CC is set,
+	use that to build impgen so we can use it when cross-compiling.
+	use correct entry points for mingw so static C++ constructors get
+	called for code in the DLL.
+	* ltmain.in (impgen.c): define O_BINARY to 0 if it is not in the
+	system headers.
+
+1999-07-24  Bert Driehuis <bert_driehuis@compuware.com>
+
+	* ltconfig.in:  Updated bsdi4 soname specs to be more like
+	linux as discussed on the bsdi mailing list.
+
+1999-07-20  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.in (AC_PROG_RANLIB):  No longer required as we now use
+	AC_CHECK_TOOL in AC_LIBTOOL_SETUP.
+	* libtool.m4 (AC_PROG_LIBTOOL):  Pass the $build variable to
+	ltconfig.
+	(AC_PROG_RANLIB): replaced with AC_CHECK_TOOL.
+	* ltconfig.in (build): new variable to hold the build triplet
+	which is now checked for unless --no-verify is specified.
+	(--build): new argument to set the build triplet.
+	(ranlib): Prefer ${host_alias}-ranlib[.exe] if $build is different
+	to $host.
+	* doc/libtool.texi (Invoking ltconfig): Document --build option.
+	* NEWS: Note --build option.
+
+1999-07-19  Erez Zadok  <ezk@cs.columbia.edu>
+
+	* doc/PLATFORMS: Updated mostly *bsd platforms.
+
+1999-07-19  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* doc/libtool.texi (Porting inter-library dependencies): Typos
+	Reported by Petter Reinholdtsen <pere@hungry.com>
+
+1999-07-17  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS, TODO: updated (pic flags)
+	* libtool.m4 (AC_PROG_LIBTOOL): added --with-pic flag
+	* ltconfig.in: new pic_mode variable and --prefer[-non]-pic flags,
+	  fixed the strip check (reported by Keith Bostic <bostic@bostic.com>)
+	* ltmain.in (compile mode): build only PIC/non-PIC code depending
+	  on pic_mode
+	* libltdl/README: document the supported dlopen interfaces
+	* doc/libtool.texi (tests): documented new tests
+	* tests/Makefile.am: added new tests
+	* tests/demo-pic.test: new test to test --with-pic
+	* tests/demo-nopic.test: new test to test --without-pic
+	* tests/build-relink2.test: variant of build-relink.test that
+	  uses depdemo
+
+1999-07-09  Olly Betts  <olly@muscat.co.uk>
+
+	* doc/libtool.texi (C++ Libraries):  fixed a typo.
+
+1999-07-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* README-alpha:  improved the release instructions to mention
+	actual list addresses for announcements, and urls for upload
+	locations.
+
+1999-07-03  Thomas Tanner  <tanner@ffii.org>
+
+	* doc/PLATFORMS: 1.3b passes all tests on cygwin
+
+1999-07-03  Pavel Roskin <pavel_roskin@geocities.com>
+
+	* ltconfig.in: finish_cmds for FreeBSD removed
+	* depdemo/l3/Makefile.am: install libl3.la into an extra directory
+
+1999-07-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.in: bumped version to 1.3c.
+
+	GNU libtool 1.3b was released.
+
+	* NEWS: inserted todays date.
+
+1999-07-02  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* doc/PLATFORMS: Tested on as many platforms as possible for me.
+
+1999-07-01  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: updated
+	* doc/PLATFORMS: updated
+	* changed my email address
+
+1999-06-30  Thomas Tanner  <tanner@ffii.org>
+
+	* demo/foo.h: use LT_PARAMS instead of LTDL_PARAMS (this is not libltdl)
+	* tests/build-relink.test: also check for hardcode_into_libs = yes,
+	  if set, we need to relink at install-time
+
+1999-06-29  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: mention -no-fast-install, rename dummy to force
+	* doc/PLATFORMS: 1.3b passes all tests on GNU/Linux,
+	  FreeBSD (2.2.6 and 3.1)
+	* doc/libtool.texi: it's possible to link libtool libraries
+	  using -L and -l, better documentation of uninstall and clean mode,
+	  rename dummy to force, documented -no-fast-install,
+	  AC_LIBLTDL_* must be called before AC_PROG_LIBTOOL,
+	  documented hardcode_into_libs and striplib/old_striplib,
+	* ltconfig.in: search for strip program, added hardcode_into_libs
+	  and striplib/old_striplib variables, set strip commands for GNU strip,
+	  on FreeBSD >= 3.2 set hardcode_into_libs to yes,
+	  fast-install mode doesn't work if hardcode_into_libs = yes
+	* ltmain.in: reimplemented hardcoding into libraries:
+	  new relink mode, preserve all libtool args, relink libraries
+	  when installing if necessary
+	  added -no-fast-install flag, removed unnecessary `dlname'
+	  initialization, use striplib/old_striplib for stripping libraries,
+	  dlname is always soname or in library_names so we don't need
+	  to handle different file names
+
+1999-06-29  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (freebsd*, shlibpath_overrides_runpath): Set to yes
+	up to release 3.1, and to no from 3.2 on.
+	Reported by Pavel Roskin <pavel_roskin@geocities.com>
+
+1999-06-29  Pavel Roskin <pavel_roskin@geocities.com>, Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (freebsd*, shlibpath_overrides_runpath): Set to
+	yes; tested on 3.1-ELF by Pavel and on 2.2.6 by Alexandre.
+
+1999-06-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (linux-gnu*, deplibs_check_method): Use pass_all on
+	alpha, x86 and sparc architectures by now, reverting to file_magic
+	at least on ARM, where it breaks.
+
+1999-06-23  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: updated
+	* README: added GNU Hurd to the supported platforms
+	* doc/libtool.texi: document `-dlpreopen dummy'
+	  instead of `-dlopen dummy'
+	* libltdl/ltdl.c (strchr): fixed typo (missing star)
+
+1999-06-23  Stephan Kulow <coolo@itm.mu-luebeck.de>
+
+	* libltdl/ltdl.c (strrchr): fixed typo (missing star)
+	* libltdl/ltdl.c (trim): use `const' to silence -Wwrite-strings
+
+1999-06-23  Olly Betts  <olly@muscat.co.uk>
+
+	* ltmain.in (ltdll.c): Support for crosscompiling from linux to
+	mingw32.
+
+1999-06-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (cygwin, export_symbols_cmds): If there is already
+	an extracted and compiled ltdll.c, then don't delete, reextract
+	and recompile.
+	(cygwin, archive_expsym_cmds): Make sure the ltdll source has been
+	extracted and compiled before referencing the object, since there
+	are paths through the code which run archive_expsym_cmds without
+	running export_symbols_cmds.
+
+1999-06-20  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in:  moved the test for NM after the test for
+	no_builtin_flag.
+
+1999-06-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in: Use sed '$q' instead of sed "" for copying ltmain,
+	just in case some sed does not support an empty command.
+
+	* ltconfig.in (link_static_flag, ac_cv_prog_cc_static): Use the
+	latter in the test.
+
+1999-06-18  Thomas Tanner  <tanner@ffii.org>
+
+	* ltconfig.in (bsdi4, deplibs_check_method): use a less restrictive
+	  regex (reported by Chris P. Ross <cross@eng.us.uu.net>)
+	* ltmain.in: support `-dlopen dummy', define lt_preloaded_symbols
+	  if dlself != no
+	* doc/libtool.texi (Compile and Link mode): document it,
+	  documented the -Wc, -Wl flags, libtool does also support non C
+	  source code
+
+1999-06-18  Teun Burgers  <burgers@ecn.nl>
+
+	* ltconfig.in: CR/LF fix for broken DJGPP bash
+	* ltmain.in: CR/LF fix for DJGPP
+
+1999-06-18  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in (outputname): When generating the executable wrapper
+	script, $outputname already has the $exeext suffix, so we needn't
+	add it again.
+
+1999-06-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/configure.in (ac_cv_lib_dl_dlopen): missing "x" in test
+	comparison corrected.
+
+	* libltdl/ltdl.c (sys_wll_open): libltdl expects this function to
+	fail if it is unable to physically load the library.  Sadly,
+	LoadLibrary will search the loaded libraries for a match and
+	return one of them if the path search load fails.  Simulate a
+	failure in this case for compatibility with the other APIs.
+	Also, LoadLibrary takes the liberty of adding `.dll' to library
+	names passed without an extension, we now add a trailing `.' to
+	prevent this from happening.
+
+1999-06-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (sys_wll_close): Strangely enough, Microsoft have
+	decided that LoadLibrary returns `0' for success, yet FreeLibrary
+	returns `0' for failure!  The FreeLibrary call used to interpret
+	`0' as success for both functions.
+
+1999-06-14 Thomas Tanner  <tanner@ffii.org>
+
+	* ltconfig.in: use eval when setting have_dlfcn_h, reformatting
+
+1999-06-12 Thomas Tanner  <tanner@ffii.org>
+
+	* ltmain.in: store old archives in deplibs and old_deplibs,
+	  retain the order of dependency libraries (even old archives),
+	  determining the absolute directory name didn't work due to a typo,
+	  add the library search paths of all dependency libraries when
+	  linking a library (fixes IRIX 5.2 bug)
+
+1999-06-10  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in: Reverted June 6's patch for new GNU ld output, it
+	is no longer needed, as ld reverted to the original format.
+	* NEWS: Likewise.
+
+	* ltconfig.in: When testing self-dlopening, test whether dlclose
+	crashes.  On FreeBSD 3.1, it does.  :-(
+	* libltdl/configure.in: Likewise.
+	* NEWS: Note work-around.
+	Reported by Pavel Roskin <pavel_roskin@geocities.com>
+
+1999-06-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (exeext): autoconf's AC_EXEEXT uses "no" to indicate
+	no extension, and we must do the same in order to share the cache
+	value. Also we must ignore conftest.err which HPsUX (at least)
+	fills with gratuitous warnings.
+	(objext): for consistency, do the same as above.
+	Reported by Pavel Roskin <pavel_roskin@geocities.com>
+
+1999-06-09  Pavel Roskin  <pavel_roskin@geocities.com>
+
+	* ltconfig.in (exeext): Use quotes in the test, to prevent a
+	failure in sh.test.
+
+1999-06-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in: Reordered tests to be more like configure.in's
+	recommended order (programs first, then libraries, etc.).
+	Performed a manual ``constant folding pass'' (eg: s/eval "test
+	\"echo '$''{'lt_cv_dlopen'+set}'`\" != set/test
+	"${lt_cv_dlopen+set}" != set/).
+	s/test "${foo+set}" = "set"/test "X${foo+set}" = Xset/g
+
+	* ltconfig.in (link_static_flag): Accept, in order of decreasing
+	preference: the cached value; the default value for the current
+	host.  Also test that the compiler accepts the flag, and cache
+	that result too.
+
+	* ltconfig.in (pic_flag): Accept, in order of decreasing
+	preference:  the cached value; the default value for the current
+	host.  Also test that the compiler accepts the flag, and cache
+	that result too.
+
+1999-06-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (LN_S): Accept, in order of decreasing preference:
+	the cached value; an environment setting; ``ln -s'' if it works;
+	``ln'' if ``ln -s'' doesn't appear to work.
+
+	* ltconfig.in (objext): Accept, in order of decreasing preference:
+	the cached value; the result of a test object compilation.
+
+	* ltconfig.in (RANLIB): Accept, in order of decreasing preference:
+	the cached value; an environment setting; the first file called
+	``ranlib'' in the user's path.
+
+	* ltmain.in (exeext): Use $exeext when working out the names of
+	programs (but not the wrapper script itself due to a stupidity in
+	win32 which hardwires the .exe extension to the binary loader!).
+	* ltconfig.in (exeext): Now that the wrapper script tries to move
+	executables, we need to know whether they have an extension (ala
+	AC_EXEEXT).  Since we can't rely on AC_EXEEXT having been called
+	in configure.in, we must be able to check for ourselves, though we
+	can look for a cached result incase AC_EXEEXT was called.
+
+	* ltconfig.in (cygwin, pic_flag):  Force separate compilation of
+	objects for dlls vs. objects for static archives.  Using a cpp
+	macro also allows us to decide whether or not we need to use
+	dllexport/import declarations.
+
+	* ltconfig.in (cygwin, need_version): Set to no, otherwise module
+	dll's end up with mighty long names!
+
+1999-06-06  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in: Support new GNU ld --help output format.
+	* NEWS:  Likewise.
+	Reported by Gaël Quéri <gael@baoule.dyndns.org> and
+	H.J. Lu <hjl@varesearch.com>.
+
+1999-06-05  Mark Kettenis  <kettenis@gnu.org>
+
+	* ltconfig.in: Update support for the Hurd.  Make sure that the
+	soname includes the major version number and create the	right
+	links.  Allow shared objects without the `lib' prefix and without
+	version information.
+
+1999-06-02 Nick Rasmussen <nick@jive.org>
+
+	* ltmain.in (link): use "$nonopt" as the compiler for
+	  compile/finalize_command
+
+1999-05-27  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* TODO: Remove the short list of people interested in C++
+	constructors; it's not meaningful, since there are so many more
+	people requesting this feature, and we just can't maintain it
+	accurate.
+
+1999-05-27  Pavel Roskin  <pavel_roskin@geocities.com>
+
+	* ltconfig.in (GNU Hurd, deplibs_check_method): Use pass_all.
+
+1999-05-27  Alexandre Oliva  <oliva@dcc.unicamp.br>, Olly Betts  <olly@muscat.co.uk>
+
+	* ltmain.in: Expand convenience libraries when creating reloadable
+	objects.
+	* NEWS: Ditto.
+
+1999-05-27  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* NEWS: Mention the two bugfixes below.
+
+	* ltmain.in: Only create directory into which to extract
+	convenience libraries when $convenience is not empty.  It would
+	always be created on systems that did not support
+	whole_archive_flag_spec.
+
+	* ltconfig.in (export_symbols_cmds): Add $convenience.
+	(cygwin, export_symbols_cmds): Ditto.
+	* ltmain.in: Generate export symbol list before expanding
+	convenience libraries, to avoid passing whole_archive_flag_spec to
+	$NM.
+	Reported by Godmar Back <gback@cs.utah.edu>
+
+1999-05-27  David Jones  <jones@mosaid.com>
+
+	* libltdl/ltdl.c (LTDL_BIND_FLAGS): Remove BIND_VERBOSE, to avoid
+	printing error messages.
+
+1999-05-26  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	GNU libtool 1.3.2 was released.
+
+1999-05-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* NEWS: List fixed problems.
+	* doc/PLATFORMS: Tested for 1.3.2.
+
+	* config.guess: Synch with GNU common.
+
+	* ltmain.in: Revert to stripping .exe on all platforms.
+	* TODO: Note about this problem.  Demo is fixed on win32.  Support
+	`empty' convenience libraries.
+
+	* ltconfig.in (solaris*, ld_shlibs): Do not enable shared
+	libraries with GNU ld 2.8.*, it's broken.  Emit a warning
+	suggesting an upgrade.
+	Reported by Brian Ford <ford@vss.fsi.com> and Ronald Pijnacker
+	<Ronald.Pijnacker@best.ms.philips.com>
+
+1999-05-25  Frank Ch. Eigler <fche@cygnus.com>
+
+	* ltmain.in: file_magic check would not avoid cyclic links.
+
+1999-05-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* depdemo/main.c, depdemo/l1/l1.c, depdemo/l2/l2.c: K&R-ize.
+	* depdemo/l3/l3.c, depdemo/l4/l4.c: Likewise.
+
+	* ltmain.in: Remove object files before writing to them, to avoid
+	circular links.
+	Reported by Ron O'Hara <rono@sentuny.com.au>
+
+1999-05-24 Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: support for installing stripped libraries using GNU strip
+	* ltconfig.in: set deplibs_check_method=pass_all on FreeBSD,
+	  Linux and Solaris since no one can reproduce the famous deplibs
+	  bug
+	* ltmain.in: preserve $CC (reported by Tom Tromey),
+	  strip libraries using GNU strip if it's available and the
+	  -s flag was passed to "install"
+
+1999-05-23  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* doc/PLATFORMS: Release 1.3.1 passes on GNU Hurd/x86.
+	Reported by Pavel Roskin <pavel_roskin@geocities.com>
+
+1999-05-23 Thomas Tanner  <tanner@ffii.org>
+
+	* ltmain.in: strip off the .exe suffix only on *Win
+	  (Reported by Matthew D. Langston <langston@SLAC.Stanford.EDU>)
+
+1999-05-22 Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: updated
+	* TODO: -Wc, -Wl, implemented
+	* AUTHORS: changed my email address
+	* doc/libtool.texi: fix "wierd" typo :)
+	* ltmain.in: linking against convenience libraries was broken,
+	  implemented the "-Wc," "-Wl," "-Xcompiler" "-Xlinker" flag for
+	  compiler and linker-specific flags,
+	  add -lc before we do the deplibs check
+	* ltconfig.in: linkopts -> compiler_flags for $CC and linker_flags
+	  for $LD, link_all_deplibs=yes on IRIX
+
+1999-05-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: insert todays date alongside 1.3.1 release.
+	* Makefile.in: use gnu not gnits rules
+	* config.guess: synch with gnu common & apply Takabatake-san's
+	MIPS *000 patch.
+	* config.sub: synch with gnu common.
+
+1999-05-22  Doug Evans  <devans@casey.cygnus.com>
+
+	* libltdl/configure.in (dlerror): Fix typo in dlopen found in -ldl
+	test.
+
+1999-05-21  Pavel Roskin  <pavel_roskin@geocities.com>
+
+	* Makefile.am (EXTRA_DIST): Don't distribute instutils.
+	(install-data-hook): use libltdl/Makefile.am's local-install files
+	rule.
+	* libltdl/Makefile.am (local-install-files):  New rule to install
+	libltdl without creating links or mode 777 directories.
+	* instutil/*: deleted.
+
+1999-05-21  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* doc/PLATFORMS: Updated to 1.3.1 for all platforms I've got.
+	Added sparc-unknown-linux-gnu.
+
+1999-05-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* demo/foo.h: s/PARAMS/LTDL_PARAMS/g
+	* libltdl/ltdl.h: ditto.
+	* libltdl/ltdl.c: ditto.
+
+	* demo/foo.h: s/__P/PARAMS/g
+	* libltdl/ltdl.h: ditto.
+	* libltdl/ltdl.c: ditto.
+	Reported by Akim Demaille <demaille@inf.enst.fr>
+
+1999-05-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* NEWS: Updated docs.
+	* TODO: Recommend libtool.m4 to be inserted in acinclude.m4. AIX
+	4.3.2.0 no longer fails on static dlopening.  GNU DLD no longer
+	has to support .la files, since libltdl already does.  Convenience
+	libraries and reloadable objects should be tested in the
+	testsuite.  We could support some amount of control on the soname
+	of libraries.
+	* doc/libtool.texi: Notes about convenience libraries and
+	automake.  Documented INCLTDL.
+
+1999-05-20 Thomas Tanner  <tanner@gmx.de>
+
+	* cdemo/main.c: "Welcome _to_ ..."
+	* mdemo/main.c: ditto
+	* libltdl/configure.in: support multiple dlopening mechanisms
+	  at once
+	* libltdl/ltdl.c: prefix system dependent functions with "sys_"
+	  to avoid symbol conflicts (libdld didn't work)
+	* libtool.m4 (AC_LIBLTDL_*): set INCLTDL to the path of ltdl.h
+	* ltconfig.in: check for dlopen with -ldl first
+
+1999-05-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Added 1.3.1 news items.
+	* doc/PLATFORMS: updated the boxes I have access to, to 1.3.1
+	in preparation for the next release.
+
+1999-05-18  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (cygwin*, whole_archive_flag_spec): dlltool chokes
+	on this, so leave it unset in this case so that the ltmain code
+	knows it has to unpack convenience archives by itself.
+
+1999-05-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in: Do not exit when an unknown library name is passed
+	passed in, simply warn and continue since some compilers require
+	-LANG:* like options to work.
+	Reported by Adam C. Powell, IV <adam.powell@nist.gov>
+
+1999-05-17  Jiro Takabatake  <jiro@din.or.jp>
+
+	* ltconfig.in: port to NEC UX/4800.
+	* NEWS: updated.
+
+1999-05-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (beos*, deplibs_check_method): set to pass_all.  BeOS
+	is PIC by default.
+	Reported by "Shawn T . Amundson" <amundson@gimp.org>
+
+	* libltdl/configure.in: Fix test failures on AIX 4.3.2 by checking
+	for dlopen *with* -ldl first.
+	Reported by Greg Wooledge <ic5035%tss1crs.amgreetings.com@rose.amgreetings.com>
+
+	* demo/foo.h: Don't set any declspecs until we have full dll
+	support.
+
+1999-05-16  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (solaris2.6, whole_archive_flag_spec): Do not use
+	-Wl for allextract.
+
+1999-05-14  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* instutil/chmod: New script to avoid chmod'ing files while
+	installing libltdl's sources.
+	* instutil/ln: New script to avoid hard-linking libltdl's sources
+	in the install tree.
+	* Makefile.am (EXTRA_DIST): Dist them.
+	(instal-data-hook): Add srcdir/instutil to the beginning of the
+	PATH before installing libltdl's sources.
+
+1999-05-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* TODO: updated.
+
+1999-05-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (install-data-hook):  make sure the install directory
+	is not left world writable.
+	Reported by Andreas Schwab  <schwab@issan.cs.uni-dortmund.de>
+
+1999-04-30  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4: Use ifelse instead of if.
+	Reported by David Mazieres <dm@amsterdam.lcs.mit.edu>
+
+1999-04-29  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	GNU Libtool 1.3 was released.
+
+	* NEWS: Summarize news from 1.2 to 1.3.
+
+	* ltmain.in: Save exit status of link_command before removing
+	symbol table object file.
+
+1999-04-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/PLATFORMS: updated my hpux-10.20 and cygwin box entries.
+
+1999-04-29  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* NEWS: Improved support for DU and IRIX too.
+
+	* config.sub, config.guess: Updated from GNU common.
+
+	* mdemo/configure.in: Move AC_LIBLTDL_CONVENIENCE before
+	AM_PROG_LIBTOOL, as suggested by autoconf.
+
+	* doc/libtool.texi (Distributing libltdl): Document that -static
+	may cause the same problems on libltdl as -all-static.
+	* TODO: We might want to fix this in the future.
+
+	* doc/libtool.texi: Clear up overfull hbox.
+
+	* libltdl/Makefile.am (ltdl.lo): Add dependencies.
+	* libltdl/configure.in: Clean up some duplicate defines.  Enable
+	support for multiple dlopening mechanisms.
+	* libltdl/acconfig.h: New file.  Add #undefs for defines that
+	would be duplicated.
+
+1999-04-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (cygwin*|mingw*, DLLTOOL, OBJDUMP, AS): Only expand the
+	code that makes these configure time checks on hosts that need the
+	tools *and* if the AC_LIBTOOL_WIN32_DLL macro is used.
+
+1999-04-29  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (nlist, SYMFILE): Use outputname instead of output for
+	names within output_objdir.
+
+1999-04-28  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (AC_ENABLE_SHARED, AC_ENABLE_STATIC,
+	AC_ENABLE_FAST_INSTALL): Do not call AC_BEFORE here, they're
+	AC_REQUIREd by AC_LIBTOOL_SETUP.
+	(AC_DISABLE_SHARED, AC_DISABLE_STATIC, AC_DISABLE_FAST_INSTALL):
+	Call AC_BEFORE here, and now with two arguments, since these do
+	change the default.
+	(AC_LIBLTDL_CONVENIENCE, AC_LIBLTDL_INSTALLABLE): Fix calls to
+	AC_BEFORE.
+
+1999-04-28  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (ltconfig_enable_win32_dll): pass --enable-win32-dll to
+	ltconfig if this is set.
+	(AC_LIBTOOL_WIN32_DLL): New macro required for libtool to attempt
+	a dll build on win32 hosts.
+	* ltconfig.in (--enable-win32-dll): new flag for the cli.
+	(cygwin*|mingw*|os2*, ltconfig_enable_win32_dll): if this is not set
+	to yes, then do not attempt to build shared libraries.
+	* doc/libtool.texi: document AC_LIBTOOL_WIN32_DLL.
+	* NEWS: noted new macro.
+
+1999-04-27  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (AC_LIBTOOL_DLOPEN, AC_ENABLE_SHARED,
+	AC_ENABLE_STATIC, AC_ENABLE_FAST_INSTALL, AC_LIBLTDL_CONVENIENCE,
+	AC_LIBLTDL_INSTALLABLE): Warn if they appear after
+	AC_PROG_LIBTOOL.  AC_LIBTOOL_SETUP, actually.
+	(AC_LIBTOOL_SETUP): Check whether DLOPEN support is to be enabled
+	at autoconf time, not configure time.  Simplify code and
+	improve (?) help message about --disable-libtool-lock.
+
+1999-04-27 Thomas Tanner  <tanner@gmx.de>
+
+	* NEWS: new clean mode
+	* THANKS: added Ossama Othman
+	* doc/libtool.texi: documented the new `clean' mode
+	* ltconfig.in: set need_version=no on OSF (reported by
+	  Marcus Sundberg <mackan@stacken.kth.se>)
+	* ltmain.in: allow absolute non-existant -L paths,
+	  always use output_objdir instead of objdir for temporary files,
+	  delete generated temporary symbol lists,
+	  don't add .la twice in the pseudo-library header,
+	  implemented and documented clean mode (deletes libraries,
+	  programs and object files and the files associated with them),
+	  if build_libtool_libs=no and no static library is available,
+	  try to link the program against the shared library,
+	  don't add a statically linked library to the dependency_libs
+	* ltmain.in (help uninstall): added a missing backslash
+	  after echo (reported by Ossama Othman)
+
+1999-04-27  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (old_archive_cmds): Iterate on oldobjs to find out
+	which links to object files we must create.  Do not test for empty
+	pic_flag to create such links.  Use objext when searching for
+	object files extracted from convenience library.
+
+	* ltconfig.in (compiler_c_o): Make sure the compiler does not
+	create temporaries in the current directory when output should go
+	elsewhere.  We must perform locking if it does.
+
+1999-04-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in (old_archive_cmds): Ensure that there are always .o
+	objects available before running old_archive_cmds.
+
+1999-04-26  Erez Zadok  <ezk@cs.columbia.edu>
+
+	* doc/PLATFORMS: Updates for netbsd 1.3.3 and 1.4.
+
+1999-04-26  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (aix4.[01], always_export_symbols): The case pattern
+	would never match; fixed.
+	Reported by Stephan Kulow <coolo@itm.mu-luebeck.de>
+
+1999-04-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (OBJDUMP): Pass it to ltconfig.
+	* configure.in: AC_SUBST DLLTOOL, OBJDUMP and AS.
+	* Makefile.am (libtool, clibtool): Pass them to ltconfig.
+
+1999-04-25  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* libtool.m4 (cygwin*): Look for target objdump tool.
+	* ltconfig.in (cygwin*, file_magic_cmd): Use autoconf-located target
+	objdump tool.  Track OBJDUMP like DLLTOOL and AS.
+
+	* ltconfig.in (cygwin*, deplibs_check_method): Accept
+	"architecture: i386" as optional suffix, for it is printed on a
+	separate line sometimes.
+
+	* ltmain.in (cygwin*, ltdll.c): Wrap DllMain declaration in extern "C".
+
+	* ltmain.in (deplibs_check_method=file_magic): Redirect stderr to
+	/dev/null, to suppress error messages from target objdump.
+
+1999-04-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (irix*, soname_spec, library_names_spec): Missing
+	dots before $versuffix and $major.
+
+	* ltconfig.in (solaris*, whole_archive_flag_spec): Use -z
+	allextract/defaultextract from Solaris 2.6 on.
+	Reported by Brian Ford <ford@vss.fsi.com>
+
+	* ltconfig.in (beos*, allow_undefined_flag): Do not build shared
+	libraries with undefined symbols.
+
+	* ltconfig.in (aix4*, allow_undefined_flag): Set to -berok.
+	(aix4*, shared_flag): Set to -shared or ${wl}-bM:SRE.
+	(aix4*, archive_cmds): Use -bexpall.
+	(aix4*, archive_cmds, archive_expsym_cmds): Use shared_flag and
+	allow_undefined_flag.
+	(aix4*, always_export_symbols): Set to yes up to AIX 4.1.*,
+	because -bexpall is supported from 4.2 on.
+	Reported by Greg Wooledge
+	<ic5035%tss1crs.amgreetings.com@rose.amgreetings.com>
+
+	* ltconfig.in (hpux*, hardcode_minus_L): Set to yes.
+	(hpux*, hardcode_libdir_flag_spec): Do not use +s by default.
+	(hpux*, shlibpath_overrides_runpath): Set to no.
+
+	* ltconfig.in (irix*, osf*, archive_cmds): Write so_locations
+	within objdir.
+
+	* ltconfig.in (irix*, soname_spec): Append $major.
+	(irix*, library_names_spec): Add new soname.
+	Reported by David Kaelbling <drk@sgi.com>
+
+	* ltconfig.in (irix*, sys_lib_dlsearch_path_spec): /usr/local/lib
+	is not searched by default.  /usr/lib is searched before /lib.
+	* ltconfig.in (irix*, sys_lib_search_path_spec): /usr/lib is
+	searched before /lib.
+
+	* ltconfig.in (irix5*, need_lib_prefix, need_version): Set to no,
+	by unifying with irix6*.
+
+	* ltconfig.in (irix*, osf*, deplibs_check_method): Use pass_all.
+
+	* ltconfig.in (old_LDFLAGS, old_LIBS): Save and write to comments
+	in output file.
+
+	* ltmain.in (prefer_static_libs): New variable, set to no by
+	default, but set to yes by -static and -all-static.  Used instead
+	of build_libtool_libs to decide whether to use a shared or static
+	version of a library, when both versions are available.
+
+1999-04-25  Boyd Lynn Gerber  <gerberb@zenez.com>
+
+	* ltconfig.in (sco3.2v5*): Use LD_RUN_PATH for hard-coding.
+
+1999-04-25  Pavel Roskin  <pavel_roskin@geocities.com>
+
+	* Makefile.am (uninstall-local): Remove installed libltdl tree.
+
+1999-04-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* demo/Makefile.am (hc-direct, hc-libflag, hc-libpath, hc-minusl):
+	Added CFLAGS to link commands; SCO OSR needs it for -belf.
+
+	* TODO: -Wl and -Wc options.
+
+1999-04-12  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c: Remove trivial warnings.
+
+1999-04-22  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* ltconfig.in: Correct sed expression that extracts symbols
+	from cygwin def files.  Ignore demangled C++ names, if any.
+
+1999-04-12  John David Anglin  <dave.anglin@nrc.ca>
+
+	* libltdl/ltdl.c (shl_close): shl_t was correct here...
+	(shl_sym): ... but we have to pass the handle by reference here.
+
+1999-04-12  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* doc/libtool.texi (Invoking ltconfig): Document environment
+	variables used.
+
+	* doc/libtool.texi (Invoking ltconfig): Document --cache-file.
+
+	* doc/libtool.texi (Invoking ltconfig): Document
+	--disable-fast-install, --enable-dlopen, --with-gnu-ld and
+	--disable-lock.
+
+1999-04-11 Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl/configure.in: check for shl_load in libdld
+	* libltdl/ltdl.c (shl_close, shl_sym): use (shl_t *) instead of shl_t
+	* ltconfig.in (check for gcc): removed a bogus line,
+	  check for shl_load in libdld
+	* ltmain.in: added a warning to the header of the .la file
+	  to warn users against deleting the file,
+	  link shared against static libraries if
+	  deplibs_check_method == pass_all
+
+1999-04-10  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (AC_PROG_LD, AC_PROG_NM): When looking for programs,
+	try $ac_exeext too, so that they're found on DJGPP/MS-DOS.
+	* ltconfig.in: Likewise.
+	Reported by Robert S. Maier <rsm@math.arizona.edu>
+
+	* ltconfig.in (Usage): Removed --enable-dlopen-self.
+	Reported by Pavel Roskin <pavel_roskin@geocities.com>
+
+	* ltconfig.in: Moved sysv4 before sysv4.*.
+	(symcode): Brian's overrider is specific to sysv4, not sysv4*.
+
+1999-04-09 Thomas Tanner  <tanner@gmx.de>
+
+	* NEWS, README: Motorola System V 4 support
+	* doc/PLATFORMS: added mk88-motorola-sysv4
+	* ltconfig.in: installed patch from Brian Ford <ford@vss.fsi.com>
+	  to support mk88-motorola-sysv4
+
+	* doc/libtool.texi: some cleanups in the libltdl documentation
+
+1999-04-07  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (--fallback-echo): Do not put an inline document and
+	an exec in the same if construct; otherwise the inline document
+	may not be removed.
+	* ltmain.in (--fallback-echo): Likewise.
+	Reported by John David Anglin <dave.anglin@nrc.ca>
+
+	* dryrun.test: It would still fail at random times, because `cp'
+	and `mv' are not guaranteed to preserve the timestamps of the
+	installed files.  Instead of preserving them, just remove them
+	before the dry uninstall test.  Redirect dry-run output to stderr,
+	so that it can be easily separated from the regular output.
+
+1999-04-07 Thomas Tanner  <tanner@gmx.de>
+
+	* NEWS: support for moved libraries
+	* libtool.m4: another DJGPP fix
+
+1999-04-07  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* doc/PLATFORMS: Updated to 1.3 for all platforms I've got.  I'll
+	make sure 1.3 won't be released unless it passes all tests on
+	those platforms.
+
+	* doc/libtool.texi (Compile mode): Document potential problem and
+	work-around for `-c -o dir/foo.lo'.
+
+	* tests/dryrun.test: The constant modifications of libtool would
+	cause main.o to be updated at the wrong time; the new approach is
+	to modify the libtool script so that it enables dry run depending
+	on whether an environment variable is set or not.  I've also moved
+	`after' and `before' to a directory deep within $objdir, instead
+	of creating it in ../tests.
+	* tests/Makefile.am (CLEANFILES): Removed.
+
+1999-04-06  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* tests/dryrun.test: We cannot rely on setting LIBTOOL, because
+	automake may use sub-makes, and the setting will not be propagated
+	to them on some makes.  Instead, create a dry version of libtool
+	and switch between it and the original one before and after dry
+	runs.
+	* tests/Makefile.am (CLEANFILES): Added libtool-*, created by
+	dryrun.test.
+
+	* tests/dryrun.test: Use cmp instead of diff.
+	(before, after): Create them within ../tests.
+	(libtool): Set to `/bin/sh ./libtool' by default, but use LIBTOOL,
+	SHELL and top_builddir from the environment if available.  For dry
+	runs, use "$libtool -n".
+	* tests/Makefile.am (CLEANFILES): Added before and after.
+	* ltmain.in: Do not create links to object files in dry runs.
+
+1999-04-06 Thomas Tanner  <tanner@gmx.de>
+
+	* ltmain.in: added a missing line of the ILD patch
+
+	* NEWS: improved DJGPP support
+	* doc/libtool.texi: removed hardcode_into_libs documentation
+	* libtool.m4: some DJGPP fixes
+	* ltconfig.in: ditto, reverted one of my previous patches: we need
+	  to check for NM, removed the hardcode_into_libs support since
+	  no platform seems to support it
+	* ltmain.in: some DJGPP fixes, removed the hardcode_into_libs support
+
+1999-04-05  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (netbsd*, GNU ld): Support a.out shared libraries
+
+	* Makefile.am (CVS): allow command-line overriding of cvs
+
+	* ltconfig.in (exclude_expsyms): Exclude _GLOBAL_OFFSET_TABLE_ by
+	default, as most a.out platforms use it, and end up in trouble if
+	we preload it, so it's safer to rule it out by default, and
+	special case its removal from exclude_expsyms if someone ever
+	complains.
+
+1999-04-05 Thomas Tanner  <tanner@gmx.de>
+
+	* doc/libtool.texi: reorder tests to reflect execution order,
+	  documented dryrun.test and depdemo*
+	* ltmain.in (lt_preloaded_symbols): dry-run mode bugfix
+	* tests/dryrun.test: new test to check whether the dry-run
+	  mode works properly
+
+	* demo/run.test: removed the unnecessary test
+	* demo/Makefile.am: ditto
+	* ltmain.in: set the DLL search path on cygwin,mingw and os2
+
+1999-04-04  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (sunos4*, GNU ld): -Bstatic is not enough for
+	deplibs.test to work with GNU ld; -Bshareable is needed here.
+
+	* ltconfig.in (ld_shlibs, amigaos*): Disable shared libs with
+	native ld too.
+
+	* ltconfig.in (sunos4*, GNU ld): Reordered.
+
+	* ltconfig.in (archive_cmds, sunos4*): Revert to -Bstatic; the
+	native linker doesn't even support -Bshareable, only GNU ld does.
+	Do not use `gcc -shared' in archive_cmds, it breaks deplibs.test.
+
+	* ltconfig.in: if ld_shlibs=no, set can_build_shared=no too,
+	otherwise it will just be disregarded.  This would cause
+	netbsd/m68k with GNU ld a.out, and certainly many other platforms,
+	to incorrectly believe that shared libraries were supported, while
+	archive_cmds was empty, causing shared libraries not to be created
+
+1999-04-03  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* NEWS: improved support for AIX and HP/UX
+
+1999-04-03 Thomas Tanner  <tanner@gmx.de>
+
+	* NEWS: updated
+	* libtool.m4: check for main in libm instead of cos
+	* ltmain.in: cosmetic fixes, don't try to link libraries only once
+	  (although it's not necessary on many platforms and looks ugly...),
+
+1999-04-02  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (convenience): fixed race condition when more than one
+	library was linked with the same convenience library by
+	uniquifying the extract directory.  It is now named after the new
+	library *and* the old one, and lives in the objdir of the new one.
+
+	* ltmain.in (-L*): do not abort just because a directory specified
+	with -L does not exist; just warn and discard it
+
+	* depdemo/l1/Makefile.am (AUTOMAKE_OPTIONS): no-dependencies
+	* depdemo/l2/Makefile.am (AUTOMAKE_OPTIONS): ditto
+	* depdemo/l3/Makefile.am (AUTOMAKE_OPTIONS): ditto
+	* depdemo/l4/Makefile.am (AUTOMAKE_OPTIONS): ditto
+
+	* ltconfig.in (archive_cmds, sunos4*): where we used -Bstatic, we
+	should have been using -Bshareable
+
+	* demo/Makefile.am (CLEANFILES): clean EXTRA_* from deplibs-check
+
+	* libtool.m4 (LDFLAGS, LIBS): pass them to ltconfig, for the tests
+	that involve linking
+	* Makefile.am (LDFLAGS, LIBS, libtool, clibtool): ditto
+	* tests/Makefile.am (CFLAGS, CPPFLAGS, LDFLAGS, LIBS): set
+	(LDFLAGS, LIBS, TESTS_ENVIRONMENT): pass them down
+
+1999-04-02  Erez Zadok  <ezk@cs.columbia.edu>
+
+	* doc/PLATFORMS: 1.2f ok on various versions of hpux cc
+
+1999-04-02  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (link_all_deplibs): set to unknown by default
+	* ltmain.in: test != no, not = yes
+	* doc/libtool.texi: document unknown
+
+1999-04-01 Thomas Tanner  <tanner@gmx.de>
+
+	* doc/libtool.texi: documented deplibs.test
+
+	* demo/Makefile.am: moved testsuite specific declarations to the end,
+	  the deplibs check is now optional
+	* libltdl/configure.in: read libtool --config only once,
+	  merged AC_SYS_SYMBOL_UNDERSCORE+AC_SYS_NM_PARSE from libtool.m4
+	* libtool.m4: AC_SYS_SYMBOL_UNDERSCORE+AC_SYS_NM_PARSE were not
+	  used, lt_dlopen and silent may be empty, AC_SYS_LIBTOOL_CYGWIN
+	  no longer necessary
+	* ltconfig.in: NM is already checked in libtool.m4,
+	* ltmain.in: always link all static dependency_libs
+	* tests/Makefile.am: added deplibs.test
+	* tests/demo-exec.test, demo-inst.test: removed hell0
+	* tests/deplibs.test: new test to test the deplibs_check_method
+
+1999-03-31 Thomas Tanner  <tanner@gmx.de>
+
+	* ltmain.in: always link a library before its dependency libs
+	* mdemo/Makefile.am: test -export-symbols-regex
+
+1999-03-30 Thomas Tanner  <tanner@gmx.de>
+
+	* doc/libtool.texi: fixed a typo
+	* libtoolize.in: add the libtool scripts to libltdl.tar.gz
+	* libtool.m4: don't AC_SUBST(USE_SYMBOL_UNDERSCORE),
+	  AC_CHECK_LIBM sets LIBM, AC_LIBLTDL_INSTALLABLE doesn't work
+	  when libltdl is already installed
+	* *demo/Makefile.am: use LIBM
+	* *demo/configure.in: AC_SUBST LIBM
+	* libltdl/configure.in: use ac_cv_sys_symbol_underscore instead of
+	  USE_SYMBOL_UNDERSCORE
+	* ltconfig.in: added link_all_deplibs variable
+	* doc/libtool.texi: document it
+	* ltmain.in: always search for libname.la - don't eval libname_spec,
+	  when linking libraries against static ones just print a warning
+	  and add them to dependency_libs, add -lc before deplibs,
+	  always link all dependencies of a static library or if
+	  link_all_deplibs is yes, hardcode library paths if
+	  hardcode_into_libs is no, don't link against dependency_libs
+	  that already are deplibs
+
+1999-03-30  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (aix4*, collect2name): make sure collect2 exists
+	before running string on it, to avoid errors on old gccs
+	Reported by Erez Zadok <ezk@cs.columbia.edu>
+
+	* ltconfig.in (aix4*, hardcode_libdir_flag_spec): unless we're
+	using gcc with old collect2, use -b libpath to hardcode the
+	library search path
+
+	* ltmain.in, ltconfig.in: reverted most of the quoting changes
+	from 1999-03-25; Gary's delay_variable_subst patch from 1999-02-19
+	obviates it.  Keep only quoting of $PATH, for uniformity with
+	other systems that already did it
+
+1999-03-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_dladdsearchdir): Forgot to mallocate the
+	extra byte of memory for the teminating NUL, and forgot to
+	strcpy the original path in to the new memory before appending
+	the new path compononent.
+
+1999-03-27 Thomas Tanner  <tanner@gmx.de>
+
+	* NEWS: updated
+	* README: updated (BeOS support, no longer shared libraries
+	  support for AmigaOS), cleanups, we have now two mailing lists
+	* REAMDE-alpha: autogen -> bootstrap, we have now two mailing lists
+	* THANKS: added Xavier Pianet
+	* doc/PLATFORMS: BeOS works
+	* doc/libtool.texi: we have now to two mailing lists,
+	  updated -dlopen self documentation, documented libltdl's license,
+	  put each author in a separate line,
+	  inter-library dependencies on uninstalled libtool libraries are
+	  now supported, cleanups and minor corrections
+	* libltdl/COPYING.LIB: new file
+	* libltdl/ltdl.[ch]: added special exception to the LGPL license
+	* libtool.spec: removed, it was outdated
+	* Makefile.am: removed libtool.spec
+	* ltmain.in: use TMPDIR when possible, create a subdirectory
+	  in the temporary directory, added -export-symbols-regex to the help,
+
+1999-03-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* demo/Makefile.am: create a static library, link two libtool
+	archives with it, then link the program hell0 with both
+	* demo/hell1.c, demo/hell2.c: dummy files used to create the
+	libtool archives without introducing symbol conflicts
+	* tests/demo-exec.test, tests/demo-inst.test: run the new program
+	* ltconfig.in (irix5*, irix6*, deplibs_check_method): pass_all
+
+	* ltmain.in ($PATH): instead of modifying the PATH, better prevent
+	its expansion the first time *_cmds variables are eval'ed.  Modify
+	$show within loops that eval them so as to expand variables
+	* ltconfig.in (*_cmds): quote $ so that they're not expanded by
+	the first eval
+
+1999-03-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in ($PATH):  Expand any tildes in the users path to the
+	contents of $HOME to avoid problems with *_cmds splitting and
+	evaluation.
+
+1999-03-24 Thomas Tanner  <tanner@gmx.de>
+
+	* TODO: support -dlopen for libraries
+	* doc/PLATFORMS: Erez Zadok reported that libtool works on bsdi 4.0.1
+	* doc/libtool.texi (libltdl): libltdl supports BeOS
+	* libltdl/ltdl.c: shlib_ext was declared even if LTDL_SHLIB_EXT
+	  didn't exist, partially reverted my previous patch: BeOS will
+	  automatically search in ADDON_PATH
+	* ltmain.in: don't allow relative run-paths, fixed a typo in a warning,
+	  ignore -dlopen self for libraries and objects,
+	  only accept -L paths that exist, minor cleanups,
+	  bugfix: add -lc for normal libraries, not convenicence libraries
+	  removed offensive warnings/comments
+
+1999-03-24  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (ld_shlibs, amigaos*): disable shared libraries
+
+1999-03-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/configure.in: the sed expression for finding the shared
+	library extension used to think the . in [.] for the cygwin
+	shared_library_names_spec was the start of the extension!!  We now
+	remove anything in square brackets (assuming that the square
+	brackets delimit a sed or expr expression which is not part of the
+	extension) before looking for the extension.
+
+	* TODO (cygwin):  food for thought re: mutually dependant dlls.
+
+1999-03-21  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* tests/build-relink.test: if we relink and have hardcode_direct,
+	removing an uninstalled library breaks an uninstalled program
+
+	* doc/libtool.texi: documented convenience libraries
+	* TODO: removed entry about it
+
+	* tests/*-unst.test: if directory is not configured, skip it
+	* tests/demo.test, tests/mdemo.test: unused, removed
+	* tests/depdemo.test: ditto
+
+1999-03-20 Thomas Tanner  <tanner@gmx.de>
+
+	* doc/libtool.texi (link mode): documentation for -module updated
+	* ltconfig.in: fast-install mode doesn't work for
+	  hardcode_into_libs=yes
+	* ltmain.in: bugfix: "-dlopen self [-all]-static" wouldn't use
+	  dlopen_self_static, automatically enable -export-dynamic when
+	  using "-dlopen self",	always make run-paths absolute,
+	  ignore -lc only on platforms that don't have such a library,
+	  cleanups in the ILD code, find even installed libtool libraries
+	  that were moved, before generating the DLL-import library we need
+	  to set libname, improved hardcoding of shlibpath for libraries,
+	  don't generate an installable pseudo-library for convenience
+	  libraries, bugfix: export_symbols would be removed immediately
+	  before it is used
+
+1999-03-19 Thomas Tanner  <tanner@gmx.de>
+
+	* use the same header in all configure.in's and Makefile.am's
+	* NEWS: improved support for BeOS and Cygwin
+	* TODO: ILD branch was merged, all internal variables and macros
+	  are now documented
+	* demo/Makefile.am: use $(LIBS) instead of -lm
+	* doc/libtool.texi: documented new variable hardcode_into_libs
+	  and thread_safe_flag_spec, renamed all AM_ENABLE/DISABLE_* macros
+	  to AC_*, documented AC_DISABLE_FAST_INSTALL and AC_LIBTOOL_DLOPEN
+	* libltdl/ltdl.c: added two new error messages (cannot_open_error,
+	  cannot_close_error), use them where approriate,
+	  BeOS support (thanks to Xavier Pianet), on BeOS search modules
+	  additionally in ADDON_PATH
+	* libtool.m4: rewrote AC_CHECK_LIBM: BeOS and Cygwin don't have
+	  libm and *-ncr-sysv4.3* requires libmw
+	* ltconfig.in: don't check for LoadLibrary, hardcode dlopen
+	  configuration for BeOS and Cygwin
+	* ltmain.in: fix sourcing of .la files on Solaris
+	  (patch by Raja R Harinath)
+
+1999-03-19  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (sunos4*, with_gnu_ld, hardcode_minus_L): remove,	we
+	have -rpath
+	(aix4*, without_gnu_ld, hardcode_shlibpath_var): unsupported is
+	default
+	(hpux9*, hpux10*, hpux11*, archive_cmds): drop +s, unneeded here
+	(hpux9*, hpux10*, hpux11*, hardcode_libdir_flag_spec): add +s
+	before +b
+	(hpux9*, hpux10*, hpux11*, shlibpath_overrides_runpath): since +s
+	appears before +b, set it to yes
+	(hardcode_shlibpath_var, hardcode_action): do not use
+	shlibpath_var to specify the compile-time search path; it loses,
+	and we may end up linking with pre-installed older versions of
+	libraries instead of yet-to-be-installed ones
+	(*, hardcode_direct, hardcode_minus_L): remove entries that set
+	them to no, that is default
+
+	* demo/Makefile.am (hc-direct, hc-libpath, hc-minusL): link with
+	$$hardcode_libdir_flag_spec, if available, with libdir=$(libdir),
+	to make sure the hardcode_* variables will produce the expected
+	results even in the presence of a hardcoding flag; depend on
+	libhello.la having been installed already
+	(hc-libflag): link with the installed library, but try to
+	hard-code the uninstalled one
+	* doc/libtool.texi: document the changes
+
+	* tests/*.test: when a test fails, skip tests that depend on it.
+	If a certain configuration is not supported, skip all its tests.
+
+	* doc/libtool.texi: reorder tests to reflect execution order
+
+	* tests/noinst-link.test: new test
+	* tests/Makefile.am (TESTS): added noinst-link.test
+	* doc/libtool.texi: document it
+
+1999-03-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in (dependency_libs): There is no reason to infer that
+	the pseudo library is invalid if dependency_libs='' at
+	install-time, or else libltdl/libltdl.la is invalid!!
+
+1999-03-18  Thomas Tanner  <tanner@gmx.de>
+
+	* merged my inter-library dependencies code from the ILD branch:
+	* NEWS: inter-library dependencies are now supported
+	* configure.in: add the depdemo subdirectory
+	* depdemo/*: new demo to demonstrate inter-library dependencies
+	* tests/depdemo*: new tests for depdemo
+	* ltconfig.in: added hardcode_into_libs (whether library paths
+	  should be hardcoded into the libraries),
+	  it currently defaults to 'no'
+	* ltmain.in: new internal 'relink' mode to relink libraries
+	  on platforms with hardcode_into_libs=yes, save command line
+	  arguments in libtool_args, accept relative -L directories,
+	  ignore -lm on BeOS and Cygwin, always ignore -lc,
+	  handle -l, -L and .la arguments later, always make the library
+	  installation directory (-rpath) absolute, in relink mode don't
+	  delete the not-relinked library and exit immediately after relinking,
+	  try to find already-installed libtool libraries that were specified
+	  using -l, support hardcoding of library paths into libraries too,
+	  export shlibpath before linking libraries, and a lot of other
+	  big changes that I don't want to describe here... please read
+	  the source.
+
+	* merged Gary's Win32 code from the ILD branch:
+	* NEWS: Win32 DLLs are now supported
+	* TODO: removed .a library namespace clash for win32.  It is
+	  now resolved.
+	* ltconfig.in (cygwin, library_names_spec):  removed $libname.a.
+	  Creating a dll with libtool no longer creates an import library.
+	* ltconfig.in (extract_expsyms_cmds): Create $objdir if it does
+	  not exist -- i.e. we need to generate import an import library
+	  in a directory which has no libs of its own.
+	* doc/libtool.texi (old_archive_from_expsyms_cmds,
+	  extract_expsyms_cmds): documented these new variables.
+	* ltconfig.in (extract_expsyms_cmds): New variable.  Commands to
+	  extract the exported symbol list from a dll.
+	  (old_archive_from_expsyms_cmds): New variable.  Commands to build
+	  an old archive from the extracted expsyms list.
+	* ltmain.in: run the cmds in extract_expsyms_cmds and
+	  old_archive_from_expsyms_cmds as necessary.
+	* ltconfig.in (cygwin, old_archive_from_new_cmds): no longer
+	  required.
+	* ltconfig.in (cygwin, shlibpath_overrides_runpath): I'm not even
+	  sure whether win32 honours the runpath at all when searching for
+	  a dll to load!  Anyway, when set to yes this prevents a gratuitous
+	  warning.
+	* ltmain.in (deplib): The cygwin environment doesn't actually have
+	  -lm, and although the linker fakes having one, specifiying it to
+	  libtool will break ILD, so we ignore it when generating
+	  dependencies.
+
+1999-03-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/PLATFORMS: Thanks to Alexandres changes below, both my
+	hp boxes pass the entire test suite.
+
+1999-03-17  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (hpux*, hardcode_minus_L): should be no, we have +b
+	(hpux*, hardcode_libdir_separator): set to colon
+
+1999-03-17  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* doc/PLATFORMS: egcs is gcc; updates from Erez Zadok
+
+1999-03-16  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (deplibs, beos*): don't append -lc
+	Reported by Xavier Pianet <xavier@xingo.com>
+
+	* tests/build-relink.test (hardcode_action): when set to relink,
+	skip the test with lt-hell
+
+	* Makefile.am (EXTRA_DIST): add mkstamp
+	Reported by Xavier Pianet <xavier@xingo.com>
+
+	* Makefile.am (EXTRA_DIST): add ChangeLog.0
+
+1999-03-16  Thomas Tanner  <tanner@gmx.de>
+
+	* doc/libtool.texi: some minor corrections to the "-dlopen self"
+	  documentation
+	* tests/Makefile.am: sorted by name, added assign.test
+	* ChangeLog: started new file
+
+	* ltconfig.in: some cosmetical changes
+	* ltmain.in: ditto
+
+1999-03-15  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* configure.in, libtool.spec, NEWS: bump to 1.3a
+	* Branched for release 1.3 (branch-1-3)
+	* configure.in, libtool.spec, NEWS: bump to 1.2g
+
+	* configure.in, libtool.spec: bump to 1.2f
+	* doc/PLATFORMS: ditto
+	* NEWS: libtool 1.2f released
+
+	* ltmain.in: silence ``unbug'' :-) detected by sh.test
+
+1999-03-14  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* TODO: we now use full pathnames for `file'
+
+1999-03-14  Thomas Tanner  <tanner@gmx.de>
+
+	* TODO: libltdl is now documented
+	* doc/libltdl.texi (linking with installed libtool libraries):
+	  fixed typo
+	* doc/libltdl.texi (libltdl): added documentation for building
+	  libtool modules and examples how to embed libltdl
+	* ltmain.in: don't ignore user-specified run-paths (fixed it
+	  at the right place)
+
+1999-03-14  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (deplibs_check_method=none): discard -L and -R
+	switches when testing whether deplibs contains some library
+
+1999-03-14  Erez Zadok  <ezk@cs.columbia.edu>
+
+	* config.sub: recognize hppa2.0w, yet to be installed at GNU
+
+	* config.guess: minor update for FreeBSD-elf, yet to be installed
+	at GNU
+
+1999-03-14  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (bsdi4*, sys_lib_search_path_spec,
+	sys_lib_dlsearch_path_spec): fix thinko in variable names; add
+	standard directories
+
+	* ltmain.in (exclude_expsyms): exclude symbols before sorting,
+	otherwise only the sorted list will have them excluded
+
+	* ltconfig.in (file_magic_cmd, file_magic_test_file, freebsd-elf*,
+	bsdi4*): use full pathnames when possible
+
+	* Makefile.am (all-recursive): depend on ACINCLUDE_M4_LIST
+	(all-local, check-local): remove, unused
+
+	* doc/PLATFORMS: updated platforms tested on 1.2f-pre; clean up;
+	reorder; untabify
+
+	* config.guess, config.sub: updated from GNU common
+
+	* doc/libtool.texi: notes on thread-safety problems of
+	libltdl/dlopen on GNU/Linux and FreeBSD
+
+	* ltconfig.in (aix3*, aix4*): GNU ld on AIX is very broken: it
+	cannot create working shared libraries.  Print a warning
+	suggesting the user not to use it and disable shared libraries.
+
+1999-03-13  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (global_symbol_to_cdecl): was reset before trying
+	`symprfx=_', rendering the test with `_' useless
+
+	* doc/libtool.texi (AM_PROG_LIBTOOL): eliminate overfull boxes
+
+	* doc/libtool.texi: complete dlopening/libltdl documentation
+
+	* ltconfig.in (osf3*, osf4*, deplibs_check_method): pass_all does
+	not really work; use file_magic instead.
+	(osf3*, osf4*): customize sys_lib_[dl]search_path_spec
+
+	* ltconfig.in (file_magic_test_file): new variable; if set, it
+	will be used as an argument for $file_magic_cmd to test whether
+	the regex in deplibs_check_method matches its output
+	(file_magic_cmd): use full pathnames whenever possible
+
+	* ltconfig.in (sys_lib_dlsearch_path_spec): new variable, that
+	lists the system *run-time* search path.  Listed directories are
+	not implicitly hard-coded into executables.
+	* ltmain.in: use it, but *never* discard -R flags
+	* doc/libtool.texi: document it
+	* NEWS: ditto
+	Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+
+	* tests/sh.test: look for `$Xsed' without `$echo "X...'
+	* ltconfig.in, ltmain.in: fixed a few such occurrences
+
+	* ltmain.in (-static, -all-static): revert March 11's patch, I was
+	barking up the wrong tree
+
+1999-03-12  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl/ltdl.c: removed FILENAME_MAX since LTDL_FILENAME_MAX
+	  is sufficient and doesn't break HP/UX
+
+1999-03-11  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in: (global_symbol_pipe) extract symbol tag from the
+	output of NM too
+	(global_symbol_to_cdecl): new variable; convert the output of
+	global_symbol_pipe to valid C declarations; on HP/UX, convert
+	text symbols to function declarations
+	* libtool.m4: similar modifications
+	* doc/libtool.texi: document new variable
+	* ltmain.in: use global_symbol_to_cdecl to generate lt_dlpreopened
+	symbols; avoid extracting symbol lists from dlpreopened files
+	twice; do not filter symbols from dlpreopened libraries
+	* TODO: fixed HP/UX dlpreopening problem
+
+	* ltmain.in (-static, -all-static): set dlopen_self to
+	$dlopen_self_static regardless of link_static_flag or pic_flag
+
+	* ltmain.in: FreeBSD bug that needs symbol table compiled with
+	-fPIC is fixed in release 3.1; use it only for 2.* and 3.0
+
+1999-03-11  Thomas Tanner  <tanner@gmx.de>
+
+	* ltmain.in: when building a library it doesn't make
+	  sense to remove a relinked program ("lt-" prefix)
+
+1999-03-11  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* mdemo/main.c (main, test_dl, test_dlself): propagate error
+	conditions better, to avoid false positives
+
+	* */configure.in: AC_SUBST(LIBTOOL_DEPS)
+	* */Makefile.am $(OBJECTS): depend on libtool
+	(libtool): rebuild automatically
+
+	* ltconfig.in: set dlopen_* variables to unknown when appropriate
+	* ltmain.in: only emit warning about lack of AC_LIBTOOL_DLOPEN if
+	*all* dlopen_* variables are set to unknown
+
+1999-03-11  Thomas Tanner  <tanner@gmx.de>
+
+	* ltmain.in: delete the old output files (incl. the relinked binary)
+	  before linking.
+
+	* ltconfig.in: replaced `configure' with $progname and all
+	  line numbers with @LINENO@
+
+1999-03-11  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c (strdup): cannot return str when it's NULL
+	because of const correctness
+
+1999-03-10  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c (strdup): always use our own, because the
+	standard strdup won't use lt_dlmalloc
+
+	* ltconfig.in (dlfcn.h): function definition may cause warnings;
+	define variable instead
+
+	* ltmain.in: properly create an export file for a program,
+	avoiding error messages about not finding it
+
+	* TODO: need to document AC_LIBLTDL_*; static self dlopening
+	problem fixed
+
+	* libtool.m4 (AC_LIBTOOL_DLOPEN): just set lt_dlopen=yes
+	(AC_LIBTOOL_SETUP): if lt_dlopen=yes, add --enable-dlopen to
+	libtool_flags; drop --enable-dlopen-self
+	* ltconfig.in: perform all the dirty work of testing for dlopening
+	support, because we need platform-dependent equivalents for
+	-export-dynamic, for self dlopening, and -static, for static self
+	dlopening
+	(dlopen_self_static): new configuration variable that is set to
+	yes only if static programs can dlopen themselves
+	* ltmain.in (-static, -all-static): dlopen_self=dlopen_self_static
+
+	* libltdl/configure.in (libltdl_cv_need_uscore): do not assume
+	dlfcn.h and LTDL_LAZY exist; use LTDL_GLOBAL and LTDL_LAZY_OR_NOW.
+	This test is likely to fail if self-dlopening does not work,
+	especially because we do not link the program with
+	-export-dynamic.  Let's just hope that platforms whose symbol
+	names start with underscores will also accept underscores for
+	dlopen.  We should probably use libtool to compile and link this
+	test, so that we can use -export-dynamic.
+
+	* mdemo/Makefile.am (@LIBLTDL@): depend on ../libltdl/config.h
+
+	* configure.in: fix AC_OUTPUT_COMMANDS for ltconfig and ltmain.sh
+	so that they work if srcdir is relative too
+
+	* libtool.m4 (AC_LIBLTDL_INSTALLABLE, AC_LIBLTDL_CONVENIENCE):
+	avoid introducing multiple --enable options when re-running
+	config.status
+	* libltdl/configure.in: if enable_ltdl_* is not set, assume no
+	* configure.in: if enable_ltdl_install is not set, enable it
+
+	* libltdl/configure.in: only assume implicit installation if
+	libltdl was libtoolized.  If not, print a warning message
+	suggesting the use of --enable-ltdl-install or of one of the
+	AC_LIBLTDL_* macros.
+
+	* libtool.m4 (AC_LIBTOOL_SETUP): new macro, that does all the
+	configure-work that AC_PROG_LIBTOOL used to do; add
+	--cache-file=$cache_file to libtool_flags
+	(AC_PROG_LIBTOOL): call AC_LIBTOOL_SETUP, save the cache, run
+	ltconfig and reload the cache
+	* configure.in: run AC_LIBTOOL_SETUP, then set LIBTOOL_FLAGS to
+	libtool_flags
+	* ltconfig.in: support --cache-file switch.  If it is used, load
+	the cache in the beginning and save it just before terminating
+
+	* tests/Makefile.am (TESTS): run demo-nofast before demo-shared
+
+	* configure.in: create ltconfig and ltmain.sh at the end of
+	config.status, if they do not exist.  This fixes the bootstrap
+	problem reported by Erez Zadok <ezk@cs.columbia.edu>
+
+1999-03-10  Thomas Tanner  <tanner@gmx.de>
+
+	* NEWS: sorted by importance
+	* Makefile.am: set LIBTOOL_FLAGS when generating libtool
+	* configure.in: check for dlopen support and set LIBTOOL_FLAGS
+	  accordingly
+
+	* configure.in: fix spacing for --disable-ltdl-install,
+	  always configure libltdl, add libltdl/acinclude.m4 to
+	  ACINCLUDE_M4_LIST, disable installation of libltdl if necessary
+	* libltdl/Makefile.am: set version info for libltdl.la
+	* libltdl/configure.in: don't check whether
+	  enable_ltdl_convenience/install was set so that libltdl
+	  can be used as independent package (libltdl.tar.gz) without
+	  the need to use --enable-ltdl*
+	* libltdl/ltdl.c: minor cleanups, allocate the line cache
+	  dynamically (lt_dlopen)
+
+1999-03-10  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c (lt_dlopen): some preprocessors choke if the `#'
+	of `#define' is not in column 1; let's go back to fortran! :-)
+	Add #undefs too, to avoid potential warnings or errors.
+
+1999-03-09  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (AC_LIBLTDL_INSTALLABLE, AC_LIBLTDL_CONVENIENCE):
+	renamed convenience libltdl, dropped toinst hack for installable
+	* libltdl/Makefile.am: ditto
+	* libltdl/configure.in: ditto; abort if none of the macros is used
+
+	* ltmain.in: $output_objdir/$objdir/ -> $output_objdir/lt-
+
+1999-03-09  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl/ltdl.c (lt_dlopen): don't hardcode the length of the
+	  constant strings
+
+1999-03-09  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* Makefile.am (install-data-hook): install libltdl as a directory,
+	not as a tar-file, so that we do not modify the build tree at make
+	install time
+	* libtoolize.in (ltdl, ltdl_tar): update
+
+	* configure.in, Makefile.am, NEWS: install libltdl by default
+
+	* libtool.m4 (AC_LIBLTDL_INSTALLABLE, AC_LIBLTDL_CONVENIENCE):
+	new macros
+	* NEWS: ditto
+	* libltdl/configure.in: if none of the new macros or configure
+	arguments are used, warn and build convenience library only
+	* libltdl/Makefile.am: conditionally build convenience libltdl.la
+	* mdemo/configure.in: use AC_LIBLTDL_CONVENIENCE
+	* mdemo/Makefile.am: refer to @LIBLTDL@
+
+1999-03-09  Gary V. Vaughan <gary@gnu.org>
+
+	* NEWS: updated.
+
+1999-03-08  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in: extract symbols from program objects to nlist first,
+	then translate them to the export_symbols format.  Now it works,
+	but it appears to be needlessly extracting the symbol list from
+	dlpreopened libraries twice
+
+	* ltmain.in: temporarily disable dlopen_self when linking with
+	-static or -all-static, until we figure out how to test whether it
+	works at configure time
+
+	* TODO: remember to fix this later
+
+	* tests/build-relink.test: when hell is expected to fail, run it
+	within a subshell and redirect stderr to stdout, so that dynamic
+	linker errors are only printed in verbose mode
+
+	* ltmain.in (hardcode_libdir_separator, compile_rpath,
+	finalize_rpath): only substitute hardcode_libdir_flag_spec if
+	hardcode_libdirs is non-empty
+
+	* libtool.m4 (AC_LIBTOOL_DLOPEN): do not depend on the existence
+	of dlfcn.h nor on the definition of RTLD_LAZY
+
+	* tests/build-relink.test: hellT was renamed to lt-hell
+
+	* libltdl/Makefile.am (@TOINST@/libltdl.la): do not hide the
+	command that creates the TOINST directory; remove `-o $@' from the
+	LINK command, $(LINK) already contains it.
+
+1999-03-08  Thomas Tanner  <tanner@gmx.de>
+
+	* doc/libtool.texi (tests): documented demo-nofast.test and
+	  renamed cdemo* to demo*
+
+1999-03-08  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/Makefile.am, libltdl/configure.in, mdemo/Makefile.am:
+	libltdl must not be renamed; if there's a problem with the install
+	option, let's fix it, not just work around it by breaking code of
+	users of the convenience library
+
+	* tests/build-relink.test: link broken libhello.la with at least
+	one libtool object
+
+1999-03-08  Thomas Tanner  <tanner@gmx.de>
+
+	* TODO: updated (libltdl build problem fixed)
+	* doc/libtool.texi (libltdl interface): removed the line which
+	  promised that lt_dlopen will return NULL if it can't resolve all
+	  symbols
+	* libltdl/Makefile.am, libltdl/configure.in: fixed build problem:
+	  renamed the convenience library to libltdlc.la and the
+	  installed version to libltdl.la
+	* ltmain.in (wrapper script): replaced the "T" suffix of the program
+	  file name with a "lt-" prefix
+	* mdemo/Makefile.am: use libltdlc.la
+	* tests/Makefile.am, tests/demo-nofast.test: added demo to
+	  test --enable-fast-install=no
+
+1999-03-07  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* tests/Makefile.am (TESTS): run hardcode before build-relink
+	trashes libhello.la
+	* tests/hardcode.test (need_prefix): set to yes so that _inst is
+	not removed
+
+	* ltmain.in (compile_command): append finalize search path to
+	compile search path
+
+	* tests/build-relink.test: new; check shlibpath_overrides_runpath
+	* tests/Makefile.am (TESTS): add build-relink.test; remove
+	hardcode.test duplicates
+	* doc/libtool.texi: document it
+
+	* ltmain.in (relink_command): do not prepend cd `pwd` to it, the
+	scripts already enters the correct directory, and expanding the
+	pathname would prevent the build tree from moving
+
+	* ltconfig.in (enable_fast_install): force it to no only if we
+	need relink; in the other cases, set it to needless
+	* ltmain.in (fast_install): if needless, set relink_command empty
+	* doc/libtool.texi (fast_install, shlibpath_overrides_runpath):
+	document the new behavior
+
+	* ltconfig.in (enable_fast_install): test whether it can be forced
+	off after shlibpath_overrides_runpath and enable_shared are set
+
+1999-03-07  Thomas Tanner  <tanner@gmx.de>
+
+	* TODO: updated
+	* NEWS: updated
+
+	* TODO: scheduled some items for next release/future
+	* demo/configure.in: use AC_LIBTOOL_DLOPEN
+	* libtool.m4: added AC_ENABLE/DISABLE_FAST_INSTALL macro
+	* ltconfig.in: added --disable-fast-install flag
+	* ltmain.in: partially reverted Alexandre's patch and implemented
+	  on-demand linking in such a way that the old developer-friendly
+	  linking style is optional,
+	  don't hardcode library paths that are in the system search path,
+	  fixed a typo in lib_search_path,
+	  implemented -export-symbols-regex for programs
+
+1999-03-06  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c (LTDL_LAZY_OR_NOW): renamed from LTDL_NOW; prefer
+	LAZY loading because it's much faster and NOW is apparently
+	partially broken on FreeBSD
+	Reported by Archie Cobbs <archie@whistle.com>
+
+	* ltconfig.in (archive_expsym_cmds, solaris, without_gnu_ld):
+	$lib.exp already starts with $objdir/
+	Reported by Godmar Back <gback@cs.utah.edu>
+
+	* ltmain.in (freebsd): compile symbol table file with pic_flag
+	only on FreeBSD and when not static linking; it's been causing
+	trouble on platforms such as OpenBSD.
+
+1999-02-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (cygwin): s/\\(mingw\\|cygwin\\)32/\\1/g.  Must've
+	missed this file when I changed to cygnus' new sanction name.
+
+	* ltconfig.in (sub_uncdrive): removed.  This won't work with
+	the next version of cygwin.
+	(sub_uncdir): removed. We use <drive>:/path/to/executable now.
+	* libtool.m4 (AC_PROG_LD): removed sub_uncdrive and sub_uncdir.
+
+1999-02-25  Thomas Tanner  <tanner@gmx.de>
+
+	* TODO: added items for next alpha release, ILD etc.
+	* libltdl/ltdl.c: removed unnecessary check from presym_sym,
+	  fixed bug in lt_dlclose, allow lt_dlopenext(NULL),
+	  set deplibs for lt_dlopen(NULL)
+
+1999-02-24  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (file_magic_regex): sed `10q' is faster than `11,$d'
+
+1999-02-22  Thomas Tanner  <tanner@gmx.de>
+
+	* ltconfig.in (dlopen, dlopen_self): default is unknown
+	* ltmain.in: fixed -dlopen self, print a warning
+	  if -dlopen is used without AC_LIBTOOL_DLOPEN
+	* mdemo/Makefile.am: use -dlopen self
+
+1999-02-22  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in: added missing mkdir $progdir for on-demand executable
+
+	* ltmain.in: create on-demand executable as $progdir/$$-$program,
+	and rename it to $progdir/$program only when it's finished, to
+	avoid race conditions.  We can still get the program linked
+	multiple times, if multiple instances are started simultaneously
+	and the program does not exist, but they are very unlikely to
+	interfere with each other.  There's still a possibility that one
+	process removes the $program another has just created, and doesn't
+	replace it before the other tries to run it, in a system whose
+	`mv' is not atomic, so it will $rm then $mv, but so what? :-)
+	Locking files have been avoided to prevent dead-locks in case they
+	are left over after a reboot or crash.
+
+	* TODO: removed ILD, soon to be merged, and added convenience
+	libraries docs
+
+	* ltconfig.in (irix5*, irix6*, shlibpath_overides_runpath): yes
+
+	* ltmain.in: remove on-demand executable in the proper place, and
+	just warn if it can't be removed; add wrapper code to test whether
+	the install-executable is newer than the build-executable, to
+	relink it when it appears to be out-of-date
+
+	* libltdl/configure.in: check for dld.h
+	* libltdl/ltdl.c: include dld.h
+	(dld_open) it's spelled memory_error, not no_memory_error
+	Reported by Stefan Burstroem <f94sbu@efd.lth.se>
+
+	* ltmain.in: fix typos in my last change (s/ocmpile/compile/)
+
+1999-02-21  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl/ltdl.c (lt_dlopen): use newhandle instead of handle
+	  when dlopening the executable
+	* libtool.m4 (AC_LIBTOOL_DLOPEN): removed the redundant "yes: "
+	  prefix for lt_cv_dlopen, renamed lt_cv_dlopen_LIBS
+	  to lt_cv_dlopen_libs (more consistent)
+	* ltmain.in: implemented -dl[pre]open self, necessary for
+	  lt_dlopen(NULL), generation of exported symbols was broken
+
+1999-02-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in: avoid duplication of -L switches, it sometimes breaks
+	IRIX 5.2's linker
+
+	* ltconfig.in (freebsd*, finish_cmds): expand objformat here
+	Reported by Vladimir Kushnir <kushn@mail.kar.net>
+
+1999-02-20  Vladimir Kushnir <kushn@mail.kar.net>
+
+	* ltconfig.in (freebsd-elf*, need_version, need_lib_prefix): no
+	(freebsd-elf*, library_names_spec): add $libname.so instead of
+	$libname.so$versuffix; add $libname$release.so
+
+1999-02-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* doc/libtool.texi: remove ticks from menu items; it breaks TeX
+	Reported by Erez Zadok <ezk@cs.columbia.edu>
+
+	* ltmain.in: fixes for export-symbols dry-run
+
+	* ltconfig.in (shlibpath_overrides_runpath): new variable;
+	determines whether LD_LIBRARY_PATH or equivalent can be used to
+	override a hard-coded library search path; default to unknown
+	(linux-gnu*): set it to no
+	(solaris*, sunos4*): set it to yes
+	* ltmain.in (build_libdirs_flags, build_libdirs, build_rpath): if
+	shlibpath_overrides_runpath is not yes, arrange that wrapper
+	scripts create, on demand, programs that use uninstalled libraries
+
+	* doc/libtool.texi: document it
+
+	* libtool.m4 (AC_LIBTOOL_DLOPEN): check for dlopen in libc before
+	trying in dl.  Add the actual dlopening type to lt_cv_dlopen, and
+	add any needed libraries to lt_cv_dlopen_LIBS.  Add test for
+	MS-Windows' LoadLibrary.  Check whether a program can dlopen
+	itself only if we really have dlopen(), not some equivalent
+	function, but leave room for testing with other mechanisms.
+	(AC_PROG_LIBTOOL): assume some form of dlopen, but not
+	dlopen(NULL), is available if AC_LIBTOOL_DLOPEN is not used, for
+	backward compatibility.
+
+1999-02-20  Archie Cobbs  <archie@whistle.com>
+
+	* libltdl/ltdl.c (lt_dlopen): use newhandle instead of handle
+	where appropriate, when dlopening a non-libtool library
+
+1999-02-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (export_symbols_cmds): renamed from
+	export_symbols_cmd.
+	(cygwin, mingw): Be sure to compile the ltdll.c object before
+	extracting the exported symbol list.  Extract only the names
+	of the exported symbols from the def file [otherwise we might
+	run into trouble with -export-symbols-regex].
+	(archive_expsym_cmds): Regenerate the def file from the symbol
+	export list.
+	(delay_variable_subst): New sed expression to allow us to delay
+	evaluation of $foo in a double_quote_subst evaluated variable by
+	using \$.
+	* ltmain.in (export_symbols_cmds): evaluate each ~ delimitted cmd
+	separately.
+	* doc/libtool.texi (libtool script contents): new paragraph to
+	explain the difference between _cmd and _cmds suffixes for
+	variable names.
+	(export_symbols_cmds): renamed from export_symbols_cmd.
+
+1999-02-18  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (ld_shlibs): move -soname and similar flags to the
+	end of archive_cmds and archive_expsym_cmds, so as to prevent
+	gcc's collect2 from inserting an object file between -soname and
+	the library name
+
+	* ltconfig.in (openbsd*, netbsd*, library_names_spec): append
+	alternate name without ${release}, otherwise build fails when
+	-release is used
+
+1999-02-18  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (archive{,_sym}_commands): Be careful not to
+	re-export the dll entry points DllMain@12, _cygwin_dll_entry@12 and
+	_cygwin_noncygwin_dll_entry@12 to avoid bugs with the wrong entry
+	function being called with inter-dll dependencies.
+	Reported by DJ Delorie <dj@delorie.com>
+	* THANKS: Added DJ Delorie, since his code inspired the impgen.c
+	program and because he has patiently answered all of the
+	irritating dll and win32 questions I have fired at him.
+
+	* ltmain.in (version_type):  Oops.  Irix versioning implies that
+	major version numbers are 1 based (not zero based).  Fixed.
+
+	* ltmain.in (version_type): Implement irix versioning.
+	* ltconfig.in (irix{5,6}*): Use new irix shared object versioning.
+	* TODO: remove irix versioning from TODO list.
+
+	* ltmain.in (impgen.c): Added a new embedded C file that can be
+	used under win32 to extract a def file (symbol export list) from a
+	dll that has none.  Code to use it might need to wait for the ILD
+	merge before it will be useful...
+
+1999-02-18  Thomas Tanner  <tanner@gmx.de>
+
+	* TODO: updated
+	* autogen: only libltdl needs autoheader
+	* doc/libtool.texi (link mode): documented -export-symbols-regex
+	  and updated -export-symbols
+	* doc/libtool.texi (script contents): documented
+	  always_export_symbols, export_symbols_cmd, exclude_expsyms,
+	  include_expsyms, dlopen and dlopen_self
+	  more detailed description of need_lib_prefix
+	* ltconfig.in: a "'" was missing in the default value
+	  of export_symbols_cmd
+	* ltmain.in: implemented -export-symbols-regex
+
+1999-02-17  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in: (freebsd2*, sunos4*, exclude_expsyms): exclude
+	_GLOBAL_OFFSET_TABLE_
+	* ltmain.in: implement exclude_expsyms with egrep
+
+	* libltdl/ltdl.c (lt_dlmalloc, lt_dlfree): SunOS' cc can't cope
+	with argument lists, we __P even in the definition
+
+1999-02-15  Thomas Tanner  <tanner@gmx.de>
+
+	* cdemo/Makefile.am: renamed *foo1 to *foo, removed $(MATH_LIB)
+	* cdemo/foo1.c: renamed to foo.c
+	* libltdl/ltdl.c: eliminated lt_dltype, in presym_open():
+	  search for @PROGRAM@ if filename == 0, in lt_dlopen():
+	  fixed bug for filename == 0
+	* libltdl/ltdl.h: use __P macro for lt_dlmalloc/free
+	* libtool.m4: new macro AC_LIBTOOL_DLOPEN: checks for dlopen
+	  and dlopen(NULL) support
+	* ltconfig.in: added new variables dlopen and dlopen_self,
+	  --enable-dlopen[-self] flags for AC_LIBTOOL_DLOPEN
+	* ltmain.in: use dlopen[_self], dlpreopen files if there's no
+	  dlopen support, build lt_preloaded_symbols only if
+	  -dl[pre]open was used, include program symbols if -export-dynamic
+	  was specified and there's no dlopen(NULL) support
+	* mdemo/configure.in: use AC_LIBTOOL_DLOPEN
+	* mdemo/main.c: demonstrate lt_dlopen(0)
+
+1999-02-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* demo/dlmain.c (_WIN32): The lt_symlist structure is now const,
+	so my original horrible temporary win32 hack no longer worked.
+	Here is a new horrible temporary hack to prevent helldl from SEGVing
+	on win32.  I will fix this properly when we figure out how to do
+	data exports from dlls.
+
+1999-02-14  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (AC_CHECK_LIBM): do not set MATHLIB or AC_SUBST it,
+	this has a negative side-effect of causing automake to add MATHLIB
+	to every single Makefile.  Let's use plain AC_CHECK_LIB, so that
+	LIBS get set, until we find a better alternative
+	* *demo/Makefile.am: remove $(MATHLIB)
+
+	* libltdl/configure.in: add a DESCRIPTION argument to AC_DEFINEs
+	where appropriate, so as to get rid of acconfig.h
+	* libltdl/acconfig.h: removed
+
+1999-02-13  Thomas Tanner  <tanner@gmx.de>
+
+	* *demo/Makefile.am: use $(MATHLIB)
+	* *demo/configure.in: use AC_CHECK_LIBM
+	* doc/libtool.texi: renamed file_magic_command to file_magic_cmd,
+	  renamed archive_sym_cmds to archive_expsym_cmds
+	* ltconfig.in: ditto
+	* ltmain.in: ditto
+	* libltdl/ltdl.c: use lt_dlmalloc/free
+	* libltdl/ltdl.h: define lt_dlmalloc/free
+	* libtool.m4: added AC_CHECK_LIBM macro
+	* ltconfig.in: renamed archive_sym_cmds to archive_expsym_cmds,
+	  added always_export_symbols, export_symbols_cmd, exclude_expsyms,
+	  include_expsyms, removed archive_cmds for cygwin/mingw and AIX,
+	  on Solaris store the exported symbols list in objdir
+	* ltmain.in: allow -export-symbols for modules, use thread_safe flag,
+	  add include_expsyms to the exported symbols
+
+1999-02-12  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.h (_LTDLL_EXTERN): libltdl is no longer linked as a
+	shared library, so the _declspec's were preventing the linker from
+	resolving symbols on win32.  They have been removed now.
+
+1999-02-12  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in: don't try to read objdir/libname.la before it is
+	created!
+
+	* ltmain.in: create libname.lai at link time, not at install time,
+ 	but still create it at install time if it is missing
+	Reported by Akim Demaille <demaille@inf.enst.fr>
+
+	* libltdl/ltdl.c (tryall_dlopen): strcmp filenames was reversed
+
+1999-02-11  Thomas Tanner  <tanner@gmx.de>
+
+	* autogen: libltdl needs autoheader
+	* demo/Makefile.am: renamed hell.debug to hell.static
+	  (we're demonstrating static linking, not debugging)
+	* tests/demo*: ditto
+	* doc/libtool.texi (libltdl): documented new lt_dlopen(NULL)
+	  feature
+	* libltdl/acconfig.h: required for config.h
+	* libltdl/configure.in: use config.h
+	* libltdl/ltdl.c: use config.h, support lt_dlopen(NULL)
+	  (returns a handle for the program itself)
+	* ltconfig.in: minor reformatting
+	* ltmain.in: in lt_preloaded_symbols always define
+	  the program's symbols first, for -export-dynamic list all
+	  program symbols together, -export-symbols was broken for
+	  programs, minor reformatting
+	* mdemo/Makefile.am: renamed mdemo.debug to mdemo.static
+	* tests/mdemo*: ditto, mdemo.test was completely broken
+
+1999-02-10  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (irix5*, irix6*, osf3*, osf4*): do not use
+	-set_version in archive_cmds if verstring is empty
+	(irix6*, shlibpath_var, sys_lib_search_path-spec,
+	deplibs_check_method): set appropriate values depending on
+	selected ABI, -32, -n32 or -64, as set in LD by libtool.m4
+	(uts4*): remove dot between .so and versuffix
+
+1999-02-08  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (irix5*, irix6*, deplibs_check_method): use
+	file_magic for inter-library dependency tracking
+
+	* ltconfig.in (irix5*, hardcode_libdir_separator): set it to a
+	colon, because on IRIX 5 only the last -rpath switch prevails, and
+	it can be a list of colon-separated directories.  This change will
+	affect irix6 too, but that's not a problem.
+
+	* ltconfig.in (irix5*, library_names_spec): add soname_spec,
+	otherwise we can't dlopen
+
+1999-02-08  Thomas Tanner  <tanner@gmx.de>
+
+	* ltconfig.in: according to Marcus Sundberg <mackan@stacken.kth.se>
+	  HP/UX, IRIX, OpenBSD, Digital Unix and SunOS support
+	  need_version=no and need_lib_prefix=no,
+	  fixed a bug in Solaris' archive_sym_cmds
+
+1999-02-04  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (ac_cv_sys_global_symbol_pipe): accept TAB in
+	addition to space as separator, and allow more than one space
+	between the symbol code and the symbol name; HP/UX's nm, for
+	example, uses two spaces
+	* ltconfig.in (global_symbol_pipe): ditto
+	(bsdi4, deplibs_check_method): variable name was misspelled
+	* libltdl/configure.in (libltdl_cv_preloaded_symbols): rewrite
+	test, so as not to depend on the way global_symbol_pipe is
+	initialized; the current test would get false positives, as
+	global_symbol_pipe was initialized `x=""', not `x='
+
+	* libltdl/ltdl.c (find_module): initialize filename if dir is NULL
+	Reported by Godmar Back <gback@cs.utah.edu>
+
+1999-02-04  Godmar Back  <gback@cs.utah.edu>
+
+	* libltdl/ltdl.c (lt_dlopenext): missing space for terminator when
+	allocating memory for shlib_ext
+
+1999-02-03  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c (lt_dlopenext): tmp would be trashed if shlib_ext
+ 	was longer than 3 characters
+
+1999-02-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in: new config.guess returns *-*-cygwin now instead of
+	*-*-cygwin32.  sed -e 's%\(cygwin\|mingw\)32%\1%g' ltconfig.in
+	* ltmain.in:   sed -e 's%\(cygwin\|mingw\)32%\1%g' ltmain.in
+
+	* ltconfig.in (hardcode_libdir_flag_spec, allow_undefined_flag,
+	archive_cmds, archive_sym_cmds, old_archive_from_new_cmds):
+	removed duplication of config by assuming that `test $with_gcc =
+	yes' implies gnu ld, otherwise MSVC++ (which I haven't tested
+	since I inheritted the code from Ian Lance Taylor btw!) is implied.
+
+1999-01-28  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in: Reverted this change of Alexandre's from the
+	1999-01-25; "don't try to use .o instead of .lo just because
+	there's no PIC flag.  It loses if --disable-static, and there's
+	not much point if we're referring to the same file anyway...",
+	because not all linkers will accept .lo object names.
+	* ltmain.in: In the case where --disable-static is specified (as
+	noted in Alexandre's log entry), we just link some .o files to
+	prevent the original error.
+	Reported by Andrey Slepuhin <pooh@msu.ru>
+
+1999-01-27  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtoolize.in: search for A[MC]_PROG_LIBTOOL, not
+	AM_PROG_LIBTOOL
+	Reported by Jeff Garzik <jgarzik@pobox.com>
+
+1999-01-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* THANKS: Now that we have a policy, applied it to the existing
+	list.  This in no way demeans the work of those people removed
+	from the THANKS file, who are still credited in the ChangeLogs and
+	without who's work, libtool would not work so well on many
+	platforms, but serves to highlight the outstanding and continued
+	contribution the remaining people have made.  And I quote, "We
+	reserve THANKS for people who have made major contributions, and
+	leave the credit to the others for the ChangeLog only."
+
+	* THANKS: added Sam Vilain.
+	* ltconfig.in ($echo):  When using printf to replace echo the shell
+	expands %s\n to %sn.  Changed to use "%s\n" (with quotes).
+	Reported by Sam Vilain <sam.vilain@nz.unisys.com>
+
+1999-01-27  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c (find_file): fix endless loop condition
+	(find_module): filename allocation was off by 1
+
+	* libltdl/Makefile.am (distclean-local): renamed from
+	distclean-hook, that didn't work
+
+	* libltdl/ltdl.c (lt_dlopen, non-.la): find_file now returns 0 on
+	failure
+
+	* Makefile.am (ltconfig, ltmain.sh): some broken makes don't like
+	macros in targets; replace $(srcdir) with @srcdir@
+	* configure.in (ACINCLUDE_M4_LIST): same problem; expand $srcdir
+
+	* libltdl/Makefile.am (@TOINST@/libltdl.la): if installation is
+	enabled, create to-be-installed libltdl.la within @TOINST@
+	directory
+	(noinst_LTLIBRARIES): even if installation is enabled, build
+	convenience libltdl.la, otherwise builds of random packages may
+	fail if the user happens to enable installation
+	(distclean-hook): wipe out $(TOINST)
+	* libltdl/configure.in: set TOINST and LIBLIBS as appropriate;
+	don't set NOINSTLIBS any more
+	* mdemo/Makefile.am: use libltdl.la
+
+	* libltdl/ltdl.c (find_file): oops, filenamesize was miscomputed
+
+	* libltdl/ltdl.c (find_file): allocate filename dynamically
+
+	* libltdl/configure.in (AC_PROG_LIBTOOL): automake does not
+	recognize it and fail, better keep using AM_PROG_LIBTOOL until the
+	next release of automake
+	* demo/configure.in, cdemo/configure.in: ditto
+	* depdemo/configure.in, mdemo/configure.in: ditto
+
+	* libltdl/ltdl.c: make all global strings char[], not char*; check
+	that all calls to malloc() are properly cast
+	(strdup, strchr, strrchr, trim, free_vars): declare as inline
+	(find_module): allocate filename dynamically; support null dir
+	(free_vars): free dir and name only if non-null
+	(lt_dlopen): keep dir as NULL if not given; fix expression that
+	calculated the size of name; only free and name if non-null
+	(lt_dlopenext): allocate tmp dynamically
+
+	* configure.in (pkgdatadir): expand ${PACKAGE} at configure-time,
+	just like automake does
+
+	* configure.in (pkgdatadir): define pkgdatadir explicitly, and
+ 	comment that automake does not need it, but libtoolize does
+
+	* Makefile.am (aclocaldir): do not set it explicitly, automake
+	does already
+
+	* configure.in (TIMESTAMP): use mkstamp here too
+
+1999-01-27  Thomas Tanner  <tanner@gmx.de>
+
+	* cdemo/configure.in: renamed AM_PROG_LIBTOOL to AC_PROG_LIBTOOL
+	* demo/configure.in: likewise
+	* depdemo/configure.in: likewise
+	* libltdl/configure.in: likewise
+	* mdemo/configure.in: likewise
+	* libltdl/ltdl.c: in find_module() check whether libdir is defined,
+	  tryall_dlopen(): move deallocation of an already opened handle
+	  to lt_dlopen(), allocate the directory in lt_dlopen() dynamically,
+	  minor cleanups, fixed memory leak (name)
+	* libtool.m4: renamed all AM_ macros to AC_ and added aliases for
+	  compatibilty, updated AC_SYS_NM_PARSE (no undefined symbols,
+	  don't count the symbols)
+	* ltconfig.in: added thread_safe_flag_spec (not used yet),
+	  added generic variable for linker options "linkopts" in
+	  all archive_cmds
+	* ltmain.in: added -thread-safe flag (unused)
+
+1999-01-26  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (LTCONFIG_VERSION): damn!, adding TIMESTAMP doesn't
+ 	always work, because then different ChangeLog timestamps fail to
+ 	pass the version test.  Instead of forcing both ltconfig and
+	ltmain.sh to be updated every time ChangeLog changes, better
+	revert it
+
+	* ltconfig.in (LTCONFIG_VERSION): add TIMESTAMP, remove
+	explicit quotes and add it to the list of variables to quote
+
+	* ltmain.in: reworded `dropped inter-library dependencies'
+	message, and added a warning about inter-library dependencies even
+	for non-module builds
+
+1999-01-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (install-data-hook): Don't show the if expression
+	that tests for gzip with a conditional error message; just do it
+	quietly and show the error if it fails, or the next action if it
+	succeeds.
+
+	* configure.in:  It seems Alexandre accidentally removed the
+	AC_SUBST(pkgdatadir) line recently which breaks libtoolize.
+	Reverted that small change.
+
+1999-01-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c (find_module): test old_name and dlname for NULL,
+	not len==0
+
+	* libltdl/configure.in (libltdl_cv_objdir): yes, appending the "/"
+	in configure.in was much simpler
+	* libltdl/ltdl.c (objdir): ditto
+
+	* libltdl/ltdl.c (objdir): string collation isn't portable; strcat
+	"/" explicitly.  Or should this be moved to configure.in?
+
+1999-01-25  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl/ltdl.c: allocate the variables in lt_dlopen() dynamically
+
+1999-01-25  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (file_magic): use egrep instead of expr to support
+	more general regular expressions
+	(file_regex): remove it; the name is misleading, it's not used
+ 	anywhere, and probably will never be
+	* ltconfig.in, doc/libtool.texi: ditto
+	* ltconfig.in (linux-gnu*, deplibs_check_method): extend regex to
+	support `LSB dynamic lib' in the output of `file'
+	Reported by Scott D. Heavner <sdh@po.cwru.edu>
+
+	* ltmain.in (dependency_libs, xrpath): add -R switches to
+	dependency_libs only just before creating the .la file; they
+	should not be passed to the C compiler or linker at
+	library-creation time, since we don't know whether it is supported
+
+	* ltconfig.in (freebsd2.2*, hardcode_minus_L): for FreeBSD 2.2.6,
+	this must be `no'
+
+	* mkstamp: move the sed script to extract revision and date
+	information into a separate shell-script, so that we can break
+	lines between commands; FreeBSD's sed doesn't like `;' after `t'
+	Reported by Axel Thimm <Axel.Thimm@physik.fu-berlin.de>
+	* Makefile.am: use mkstamp
+	* THANKS: added Axel Thimm
+
+	* ltmain.in: don't try to use .o instead of .lo just because
+	there's no PIC flag.  It loses if --disable-static, and there's
+	not much point if we're referring to the same file anyway...
+
+	* ltmain.in (pass_all=none, droppeddeps): set only if deplibs was
+	non-empty
+
+1999-01-24  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl/ltdl.c: minor bugfixes, append a "/" the search
+	  directory only if necessary
+	* ltconfig.in: added support for FreeBSD >= 3.0
+	  (patch from Kurt D. Zeilenga)
+	* THANKS: added Kurt D. Zeilenga
+
+1999-01-24  Thomas Tanner  <tanner@gmx.de>
+
+	* doc/libtool.texi (libltdl): list supported dlopen mechanisms,
+	  added function lt_dlopenext(), removed reference to
+	  LTDL_PRELOADED_SYMBOLS in LTDL_SET_PRELOADED_SYMBOLS
+	* libltdl/ltdl.c: partially reverted Alexandre's dynamic string
+	  allocation change (it was not necessary and the code was unreadable),
+	  cleanups, removed usr_search_path_size, renamed usr_search_path
+	  to user_search_path, in find_module() also check for moved
+	  modules, merged find_file() and find_library(),
+	  added lt_dlopenext(), in lt_dladdsearchdir() no longer reset
+	  the search path if 'search_dir' == NULL and don't use realloc()
+	  (might not be available on all platforms),
+	  removed __P((void)) in the declaration of lt_dlgetsearchpath()
+	* libltdl/ltdl.h: added lt_dlopenext()
+	* ltconfig.in: AIX archive commands were broken,
+	  fixed a MAJOR bug in global_symbol_pipe which caused
+	  "demo-shared.test;demo-make.test" to fail (libtool must not extract
+	  undefined symbols of libraries, i.e. symcode must not contain 'U')
+	* tests/Makefile.am (clean-local): "make distclean" in cdemo, too
+
+1999-01-22  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* Makefile.am (ltconfig, ltmain.sh): add ChangeLog Revision to
+	TIMESTAMP
+	* configure.in: get values of PACKAGE and VERSION set by
+	AM_INIT_AUTOMAKE, and extract only TIMESTAMP from the ChangeLog
+
+	* libltdl/ltdl.c (lt_dlopen): if we're reusing a previously opened
+	handle, don't reset its name nor add it to the list, and free the
+	name we have allocated
+	Reported by Edouard G. Parmelan <Edouard.Parmelan@France.NCR.COM>
+
+	* Makefile.am (ltconfig, ltmain.sh, TIMESTAMP): let's not assume
+	anything about the format of the date, just that it does not
+	contain `$'
+
+1999-01-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.in (date): echo the version number during
+	configuration, and show $date for cvs versions.
+
+	* Makefile.am ($(srcdir)/ltconfig): Oops.  cvs co keyword
+	expansion ate the sed expression! Changed sed separator to '%'
+	because there are '/' in the date.  Added missing '\(' to search
+	expression.  Inserted a null string to stop cvs from expanding it
+	next time =)O|
+	($(srcdir)/ltmain.sh): ditto.
+
+1999-01-22  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* Makefile.am (TSDEPS_DIST): dist-time dependencies for timestamps
+	(timestamps, update-timestamps): check whether TSDEPS_DIST are
+	up-to-date and update ltconfig and ltmain.sh if needed
+	(ltconfig, ltmain.sh): depend on TSDEPS; replace @TIMESTAMP@ with
+	the Date tag in the ChangeLog
+	(TSDEPS): empty unless overridden by update-timestamps
+	* ltconfig.in, ltmain.in (TIMESTAMP): append timestamp to most
+	references to VERSION
+
+1999-01-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in (ild): Revert the change which allowed libtool to
+	link libraries with dependencies on .la libs.
+	* NEWS: Removed reference to win32, incase 1.3 ships before
+	ild is ready.
+	* doc/PLATFORMS: Removed i686-pc-cygwin32, for the same reason.
+	* doc/libtool.texi: Removed win32 refs, for the same reason.
+
+1999-01-22  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (Xsed): add 1 to Xsed definition that goes into
+	temporary wrapper scripts
+	* libtool.m4: we don't have Xsed here, expand it manually
+	Reported by Pavel Roskin <pavel_roskin@geocities.com>
+
+1999-01-22  Edouard G. Parmelan  <Edouard.Parmelan@France.NCR.COM>
+
+	* ltmain.in (finalize_hardcode_libdirs, finalize_rpath): in
+	platforms that use -rpath, programs must be finalized at
+	installation time, otherwise build-tree programs will
+	prefer installed libraries over build-tree ones
+
+1999-01-22  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* mdemo/Makefile.am (../libltdl/libtool): if it does not exist,
+	the sub-make for libltdlc.la will take care of it, but we must at
+	least provide an empty rule for it, otherwise the sub-make will
+	never run
+
+	* demo/configure.in, demo/Makefile.am (DLPREOPEN): reverted; it
+	didn't make any difference.
+
+1999-01-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* THANKS: Added Chris Laas <golem@MIT.EDU>
+
+	From Chris Laas <golem@MIT.EDU>
+	* ltmain.in (compile):  corrected a typo in compile mode which
+	caused "gcc: unrecognized option -c-fPIC" errors due to a missing
+	space.
+
+1999-01-21  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/configure.in: reintroduce code to detect native library
+	extension
+	* libltdl/ltdl.c (lt_dlopen): if a .la file name is given, that's
+	all.  Otherwise, lt_dlopen now tries to append .la first.  If this
+	fails, it tries the given filename, and, at last, tries to append
+	the native library extension to the given filename.
+	* doc/libtool.texi (lt_dlopen): explain new lookup strategy
+
+	* libltdl/ltdl.c: major rewrite to avoid almost all fixed-size
+	buffers; only `tmp' in lt_dlopen remained.  But the code got ugly
+	:-(
+
+	* ltconfig.in (linux-gnu*, finish_cmds): remove erroneous backslash
+
+	* demo/configure.in: set DLPREOPEN to -dlopen if we don't have
+	shared libraries
+	* demo/Makefile.am (DLPREOPEN): use instead of -dlpreopen
+	(STATIC): use $(STATIC), not @STATIC@
+	* mdemo/Makefile.am (STATIC): ditto
+
+	* tests/demo-shared.test, tests/demo-static.test: new tests
+	* tests/mdemo-shared.test, tests/mdemo-static.test: ditto
+	* tests/Makefile.am: ditto
+	* doc/libtool.texi: document them
+	* demo/Makefile.am, mdemo/Makefile.am (STATIC): do not use
+	-static unconditionally, it can't work with --disable-static
+	* demo/configure.in, mdemo/configure.in: check whether libtool was
+	configured to build static libraries and, if not, set STATIC to an
+	empty string
+
+1999-01-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (module, droppeddeps): if libtool could not satisfy
+	all dependencies of a module, it will only build a static version
+	of it, and display a warning message
+
+1999-01-20  Erez Zadok <ezk@shekel.mcl.cs.columbia.edu>
+
+	* ltconfig.in (aix4*, with_gcc, archive_cmds): fix typo in Andrey
+	Slepuhin's last patch
+
+1999-01-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* Makefile.am (@DIST_MAKEFILE_LIST@): work around Ultrix /bin/sh bug
+	* tests/nomode.test (must specify a MODE): ditto
+	Reported by Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
+	* THANKS: Added Rainer Orth
+
+1999-01-20  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
+
+	* ltconfig.in: No known version of Solaris 2 hardcoded -L paths.
+
+1999-01-20  Erez Zadok <ezk@shekel.mcl.cs.columbia.edu>
+
+	* ltmain.in: s/n\'t/ not/
+	* doc/PLATFORMS: updates for sunos4/m68k and aix
+
+1999-01-20  Andrey Slepuhin  <pooh@msu.ru>
+
+	* ltconfig.in (aix4*): check for reworked collect2, always pass
+	-bnoentry option to linker when building a shared library
+
+1999-01-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (file_magic): follow soft-links before running `file'
+	on the candidate library; try to avoid entering endless loop
+	Suggested by Nix <nix@esperi.demon.co.uk>
+
+	* ltconfig.in (linux*, solaris*, bsdi4*, sys_lib_search_path):
+	remove expansion of $LD_LIBRARY_PATH
+	* ltmain.in (lib_search_path): append the expansion of $shlibpath_var
+	* doc/libtool.texi: document it
+
+	* THANKS: Added Steven Schultz
+
+1999-01-20  Steven M. Schultz <sms@wlv.iipo.gtegsc.com>
+
+	* ltconfig.in (bsdi4*, check_shared_deplibs_method): file_magic
+	(bsdi4*, sys_lib_search_path): add /shlib and other dirs
+
+1999-01-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* cdemo/main.c (main): use K&R definition syntax
+	* mdemo/main.c (test_dl, main): ditto
+	(test_dl): casts return value of lt_dlsym to appropriate types
+
+	* ltmain.in (dlsyms): #define const to nothing if not __STDC__
+
+	* ltconfig.in (global_symbol_pipe): #define const to nothing if
+	not __STDC__
+
+	* demo/dlmain.c (main): cast s->address to the appropriate pointer
+ 	types, otherwise StunOS4's cc refuses to compile it
+
+	* ltconfig.in (sunos4*, without_gnu_ld, with_gcc, archive_cmds):
+ 	add -fPIC, because libgcc is multilibbed, and we want the PIC
+ 	version of it for shared libraries, otherwise ld complains
+
+	* demo/dlmain.c (main): add missing const to declaration of name
+
+	* libltdl/ltdl.c (find_module): remove the libdir argument, and
+	try to  open library only as old_name and dir/dlname
+	(lt_dlopen): use `installed' variable in .la file to decide
+	whether to use libdir or objdir
+
+	* demo/configure.in (AC_C_CONST): added, for portability
+	* mdemo/configure.in (AC_C_CONST): ditto
+	* libltdl/configure.in (AC_C_CONST, AC_C_INLINE): ditto
+	* libltdl/ltdl.c (LTDL_FILENAME_MAX): use FILENAME_MAX if defined
+	(FILENAME_MAX): replace all explicit uses with LTDL_FILENAME_MAX
+	(presym_free_symlists, trim): don't return void, for portability
+	(lt_dlgetsearchpath): replace (void) with __P((void))
+
+	* ltmain.in (compile): when compiling both PIC and non-PIC, write
+ 	the PIC object to .libs/.lo and only rename it to .lo after
+ 	compiling the .o, to avoid fooling make dependencies
+
+	* mdemo/main.c (LTDL_PREOPENED_SYMBOLS): remove
+
+1999-01-20  Gary V. Vaughan  <gary@gnu.org>
+
+	* TODO: Added inter-library deps for ltlibs.
+
+	* THANKS: Added Vladimir Kushnir.
+
+1999-01-20  Vladimir Kushnir  <kushn@mail.kar.net>
+
+	* ltconfig.in (freebsd3*): Define `deplibs_check_method' and
+	`file_magic_command' for freebsd-elf.
+
+1999-01-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* TODO: should we also build a `static' copy of a convenience
+ 	library out of .o files?
+
+	* ltconfig.in (bsdi4*, netbsd*, uts4*, library_names_spec,
+	soname_spec): removed duplicate dot before $major
+	Reported by Steven M. Schultz <sms@wlv.iipo.gtegsc.com> (bsdi4*)
+
+	* THANKS: added Manfred Weichel
+
+1999-01-20  Manfred Weichel  <Manfred.Weichel@pdb.siemens.de>
+
+	* ltconfig.in (sysv5*): same as sysv4.3*
+
+1999-01-20  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c (lt_dlopen): properly detect error condition when
+	full pathname of non-libtool library is provided
+
+	* libltdl/configure.in (libltdl_cv_preloaded_symbols,
+	HAVE_PRELOADED_SYMBOLS): test whether we support -dl*open
+	* libltdl/ltdl.c (!HAVE_PRELOADED_SYMBOLS, lt_preloaded_symbols):
+	define it to an empty list if libtool won't generate it, so as to
+	avoid link errors.  This will cause silent dlopening failures, but
+	maybe this is better than failing to link the program...
+
+	* libltdl/ltdl.h (LTDL_PRELOADED_SYMBOLS): remove it; better to
+	declare lt_preloaded_symbols
+	* doc/libtool.texi (LTDL_PRELOADED_SYMBOLS): ditto
+
+	* ltmain.in (dlpredeps): removed, reverting 1999-01-17's change
+
+1999-01-19  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/Makefile.am (Makefile): depend on libtool
+
+	* ltmain.in (lt_preloaded_setup): function added to symbol list
+	source file to work around FreeBSD problem
+
+	* Makefile.am (check-local): depend on libltdl/Makefile
+
+	* mdemo/Makefile.am (mdemo_LDFLAGS, mdemo_LDADD): moved -dlopen
+	flags to LDADD
+	* doc/libtool.texi (Using Automake): how to add -dlopen to LDADD
+
+1999-01-19  Gary V. Vaughan  <gary@gnu.org>
+
+	From Andrey Slepuhin <pooh@msu.ru>
+	* ltmain.in (hardcode_action) Oops, misapplied the patch!
+
+	* ltconfig.in (compile_dependencylbs): removed this
+	variable and pick up the library dependencies from $deplibs.
+	* ltmain.in (compile_dependencylibs): removed this
+	variable, use deplibs to hold these dependencies.
+
+	From Andrey Slepuhin <pooh@msu.ru>
+	* ltmain.in (hardcode_action) make sure deplibs is set to include
+	all the	extra libs added to compile_command.
+
+1999-01-18  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libtool.m4 (LIBTOOL_DEPS): set it
+	* libltdl/configure.in (LIBTOOL_DEPS): AC_SUBST it
+	* libltdl/Makefile.am (libtool): use it
+	* doc/libtool.texi (AM_PROG_LIBTOOL): document it
+
+	* Makefile.am (libltdl.tar.gz): don't create it as part of the
+	build, since it is likely to become stale if we do
+	(install-data-hook): create and install libltdl.tar.gz, without
+	depending on GNU tar
+	Reported by Manfred Weichel <Manfred.Weichel@pdb.siemens.de>
+
+1999-01-17  Thomas Tanner  <tanner@gmx.de>
+
+	* Makefile.am: added libltdl.tar.gz to CLEANFILES
+	* ChangeLog: some reformatting
+	* TODO: documentation updates
+	* doc/libtool.texi: added preliminary libltdl documentation,
+	  updated dlopen and -module documentation,
+	  renamed -avoid-versioning to -avoid-version
+	  documented the libtool script variables compiler_c_o,
+	  compiler_o_lo, need_locks, old_postuninstall_cmds,
+	  postuninstall_cmds, sys_lib_search_path_spec,
+	  fix_srcfile_path, objdir, objext, libext,
+	  documented the two new flags (--ltdl[-tar]) of libtoolize
+	* libltdl/Makefile.am: incremented the version, removed
+	  libtool dependency so that it can be build independently
+	* libltdl/configure.in: removed LTDL_SHLIB_EXT hack,
+	  set version to 1.0, use AM_MAINTAINER_MODE,
+	  DLPREOPEN is always supported, check for libtool's objdir variable
+	  (LTDL_OBJDIR)
+	* libltdl/ltdl.c: some cleanups (moved constants to the beginning
+	  of the file and prefixed all of them with LTDL_, minor optimizations
+	  in find_file() and find_module()), renamed lt_dlpreopen* to
+	  lt_dlpreload* for consistency, removed LTDL_SHLIB_EXT hack,
+	  we don't need unistd.h, DLPREOPEN is _always_ supported,
+	  reverted Alexandre's lt_dlpreopen_default_ change,
+	  try to open the not-installed module before the installed one,
+	  replaced lt_dlsearchpath() with lt_dladdsearchdir(),
+	  lt_dlsetsearchpath() and lt_dlgetsearchpath()
+	* libltdl/ltdl.h: renamed lt_dlpreopen* to lt_dlpreload*
+	  for consistency, removed the declaration of lt_preloaded_symbols
+	  (should be imported by programs),
+	  reverted Alexandre's lt_dlpreopen_default_ change and added
+	  two new macros LTDL_PRELOADED_SYMBOLS and
+	  LTDL_SET_PRELOADED_SYMBOLS(),
+	  added lt_dladdsearchdir(), lt_dlsetsearchpath() and
+	  lt_dlgetsearchpath()
+	* libtool.m4: some reformatting
+	* libtoolize.in: implemented --ltdl, bugfix when checking for
+	  the libtool package directory
+	* ltconfig.in: removed $thread_safe_flags from Andrey Slepuhin's
+	  AIX patch, renamed sys_lib_search_path to sys_lib_search_path_spec,
+	  some reformatting, fixed typo in deplibs_check_method (unkwnon)
+	* ltmain.in: documented -o for compile mode, some reformatting,
+	  renamed -avoid-versioning to -avoid-version
+	  renamed sys_lib_search_path to sys_lib_search_path_spec
+	* mdemo/Makefile.am: use -avoid-version
+	* mdemo/main.c: use LTDL_PRELOADED_SYMBOLS and
+	  LTDL_SET_PRELOADED_SYMBOLS()
+
+1999-01-17  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltconfig.in (wlarc): set to either '${wl}' or an empty string,
+ 	depending on whether archive_cmds runs CC or LD
+	(gnu_ld=yes, whole_archive_flag_spec): "$wlarc" instead of '${wl}'
+
+	* mdemo/Makefile.am (../libltdl/libltdlc.la): depend on
+	../libtool, because ../libltdl/libtool depends on it
+	(mdemo_debug_*): copy from mdemo_*, adding -static to LDFLAGS
+
+	* ltmain.in (dlpredeps): append dependencies from dlopened modules
+	(but not dlpreopened ones) after all explicitly linked libraries
+
+	* ltconfig.in (need_lib_prefix, need_version,
+ 	deplibs_check_method): default to unknown, so that we're
+ 	remembered that this needs porting; unknown is interpreted as yes,
+ 	yes and none, respectively
+	(freebsd2*, freebsd3*, sunos4*, need_version): set to yes
+	(freebsd2*, freebsd3*, library_names_spec): libraries without a
+	version number are not used by `ld'; add $versuffix;
+	Reported by Ben Jackson <ben@ben.com>
+	* ltmain.in (deplibs_check_method): alias unknown to none
+	(need_version): if vinfo was not provided and release info was,
+	zero out versuffix only if we don't need_version.
+	* doc/libtool.texi: document what `unknown' means
+
+	* libltdl/ltdl.h (lt_dlpreopen_default): reverted to a macro
+	without arguments, that calls lt_dlpreopen_default_ with
+	lt_dlpreloaded_symbols
+	* libltdl/ltdl.c (lt_dlpreopen_default_): renamed from
+	lt_dlpreopen_default
+	(find_module) tryall_dlopen old_name first, so that we don't
+ 	override statically linked symbols with dlopened ones
+
+1999-01-15  Gary V. Vaughan  <gary@gnu.org>
+
+	From Andrey Slepuhin <pooh@msu.ru>
+	* libtoolize.in (cd $pkgdatadir): Make sure we return the the
+	working directory when this is done.
+
+	From Andrey Slepuhin <pooh@msu.ru>
+	* ltconfig.in (aix): Use shared library support correctly on
+	aix4*, and tweak the config for aix3.
+	* NEWS: added aix3 and aix4 to list of hosts with improved
+	support.
+	* THANKS: added Andrey Slepuhin <pooh@msu.ru>.
+
+1999-01-15  Thomas Tanner  <tanner@gmx.de>
+
+	* Makefile.am (@DIST_MAKEFILE_LIST@): added a second '$'
+	  before abs_scrdir, removed ltconfig and ltmain.sh from
+	  EXTRA_DIST (automake distributes them by default)
+
+1999-01-14  Thomas Tanner  <tanner@gmx.de>
+
+	* autogen: moved faking of the libtool scripts before
+	  the call of automake, so that ltconfig and ltmain.sh
+	  are included in the distribution
+	* ltconfig.in: when checking whether PIC is supported assume
+	  only on HP/UX that warnings during compilation mean that
+	  PIC is not supported (Thanks to Ron O'Hara)
+	* THANKS: added Ron O'Hara
+
+1999-01-14  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* Makefile.am: Moved ltconfig and ltmain.sh back into srcdir, and
+	add them to the distribution.  Added work-around if `mv -f' fails.
+	fix @AINCLUDE_M4_LIST@ and @DIST_MAKEFILE_LIST@ for relative and
+	absolute specifications of srcdir
+
+1999-01-14  Thomas Tanner  <tanner@gmx.de>
+
+	* libltdl/ltdl.c: added variable symbol prefix, added user-defined
+	  library search path (can be set using lt_dlsearchpath()),
+	  added default_preloaded_symbols which are independent of
+	  lt_dlinit/exit
+	* libltdl/ltdl.h: added lt_dlsearchpath() and
+	  lt_dlpreopen_default()
+	* mdemo/Makefile.am: use -export-dynamic until libtool
+	  and libltdl are able to handle module dependencies
+
+1999-01-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* THANKS: added Mark Elbrecht.
+	* ltconfig.in (PATH_SEPARATOR): new variable to hold valid $PATH
+	separator characters for the build host, to support DJGPP
+	environment.
+	* ltconfig.in: Use PATH_SEPARATOR instead of hardcoded `:'.
+	Reported by Mark Elbrecht <snowball3@usa.net>
+
+	* cdemo/README: typo: mdemo->cdemo
+
+1999-01-14  Thomas Tanner  <tanner@gmx.de>
+
+	* autogen: fake the libtool scripts to help fixing
+	  the bootstrapping problem
+	* Makefile.am: always configure libltdl, however after building
+	  the libtool scripts,
+	  build the libtool scripts in builddir, not srcdir
+	  (unfortunately this breaks building when srcdir!=objdir,
+	   but it was just plain wrong - needs to be fixed),
+	  build and install libltdl.tar.gz,
+	  copy acinclude.m4 instead of linking them, so that we
+	  can 'make dist' in libltdl,
+	  fixed configuring of subdirectories
+	* configure.in: removed --enable-ltdl-install - libltdl is supposed
+	  to be installed by packages, not by libtool itself
+	* libtoolize.in: new flags --ltdl and --ltdl-tar to install libltdl
+	  in packages (--ltdl doesn't work yet),
+	  install only the necessary libtool scripts, not just all
+	  files in pkgdatadir
+	* mdemo/Makefile.am: removed the rule for libltdl configuration
+
+1999-01-13  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* mdemo/Makefile.am (../libltdl/libtool): mkdir and configure
+	../libltdl
+
+1999-01-13  Thomas Tanner  <tanner@gmx.de>
+
+	* demo/dlmain.c, libltdl/ltdl.c, ltconfig.in, ltmain.in,
+	  doc/libtool.texi: renamed dld_preloaded_symbols to
+	  lt_preloaded_symbols, symbol lists are 'const'
+	* cdemo/configure.in: don't check for string.h
+	* demo/dlmain.c: renamed dld_symlist to lt_symlist,
+	  preloaded symbols are 'const', use lt_ptr_t instead of void*
+	* demo/foo.h: define lt_ptr_t
+	* doc/libtool.texi: document lt_preloaded_symbols correctly
+	* libltdl/Makefile.am, mdemo/Makefile.am: renamed libtest to libltdlc
+	* libltdl/ltdl.c: fixed some minor typos, renamed dldpre to presym,
+	  bugfix: search in search_path only if we have no directory
+	  and a search_path, in lt_dlsym() check whether symbol != 0
+	* libltdl/ltdl.h: removed lt_dlpreopen_default()
+	* ltconfig.in (dlpreopen): removed dld_preloaded_symbol_count
+	* ltmain.in: added help for -avoid-versioning, -export-symbols,
+	  -module, add @SYMFILE@ if one of -export-dynamic, -dlopen or
+	  -dlpreopen is used
+	* mail/deplibs.html: added Gordon Matzigkeit's inter-library
+	  dependencies article
+	* mdemo/Makefile.am: removed -export-dynamic from LDFLAGS
+	  (no longer necessary, since libtool defines lt_preloaded_symbols
+	  when -dlopen is used), initialize with lt_preloaded_symbols
+
+1999-01-13  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* doc/libtool.texi (Test descriptions): cdemo-static works, thanks
+	to Edouard Parmelan!
+
+	* THANKS: added Sebastian Wilhelmi
+
+	* ltconfig.in (solaris): define `need_version' to no
+
+1999-01-13  Sebastian Wilhelmi  <wilhelmi@ira.uka.de>
+
+	* ltconfig.in (solaris): Define `deplibs_check_method',
+	`file_magic_command', `need_lib_prefix' and `sys_lib_search_path'
+	* ltmain.in (file_magic_regex): Add space before matching pattern,
+	such that it works on solaris (solaris has a tab between the
+	library name (including the colon) and the `ELF' and such the
+	`ELF' will never be matched).
+
+1999-01-13  Edouard G. Parmelan  <Edouard.Parmelan@France.NCR.COM>
+
+	* ltconfig.in (NM): PATH search was not updated like in
+	libtool.m4, in last Alexandre Oliva's change to it
+	(sysv4*, ncr): pass all library dependencies
+	* ltmain.in (dependency_libs, -R): use `deplib' instead of `arg' to
+	iterate, otherwise we'd overwrite `arg'
+	(convenience, old_libs): if --disable-shared, convenience
+	libraries are just old archives, as .lo's are of no use
+	* tests/cdemo-static.test: print --disable-shared here
+
+1999-01-13  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/configure.in (libltdl_cv_shlibext, LTDL_SHLIB_EXT):
+	system-dependent extension of shared libraries
+	(libltdl_cv_shlibpath_var, LTDL_SHLIBPATH_VAR): system-dependent
+	run-time shared library search path
+	* libltdl/ltdl.c (dldpre_init, dldpre_exit): unrelate init/exit
+	from add/remove symlists, so one may add dld_preloaded_symbols
+	from main(), when only a library will call dldpre_init
+	(lt_dlopen): use LTDL_SHLIBPATH_VAR, if defined, as secondary
+	search path.  Also, if a requested .la file cannot be found, try
+	with the LTDL_SHLIB_EXTension instead.
+
+	* ltmain.in (old_archives, oldobjs): use find to SYMDEF here too
+
+	* Makefile.am (@DIST_MAKEFILE_LIST@): `$' must be doubled
+
+	* configure.in (AC_CONFIG_DIRS): configure only libltdl, and then,
+	only if --enable-ltdl-install
+	(CONF_SUBDIRS): list directories that are configured on demand,
+	but that must be included in the distribution
+	(ACINCLUDE_M4_LIST, DIST_MAKEFILE_LIST): generated from CONF_SUBDIRS
+	* Makefile.am (AUTOMAKE_OPTIONS): added version 1.3e and
+	readme-alpha, to handle README-alpha automatically
+	(EXTRA_DIST): removed README-alpha
+	(BUILD_SUBDIRS): subdirectories that are always built
+	(SUBDIRS): BUILD_SUBDIRS plus BUILD_LTDL
+	(DIST_SUBDIRS): BUILD_SUBDIRS plus CONF_SUBDIRS, from configure
+	(all-local, check-local): depend on $(ACINCLUDE_M4_LIST), from
+	configure, and libtool, so that it is built before subdirs
+	(configure-subdirs): new target
+	(configure-subdirs, distdir): depend on $(DIST_MAKEFILE_LIST),
+	from configure
+	(@DIST_MAKEFILE_LIST@): create subdir if needed, then run
+	configure.
+	On-demand configuration of subdirs at distribution time was
+	suggested by Gary V. Vaughan <gary@gnu.org>
+
+	* libtool.m4, ltconfig.in (NM): search for NM in PATH before
+	/usr/ccs/bin, /usr/ucb and /bin.  However, if the found one isn't
+	BSD-compat keep searching.  If no BSD-compat is found, use the
+	first we found.
+
+	* THANKS: added Raffaele Sena
+
+1999-01-13  Raffaele Sena  <raff@aromatic.com>
+
+	* libltdl/ltdl.c: replaced RTDL with RTLD
+
+1999-01-13  Manish Singh  <yosh@gimp.org>
+
+	* ltconfig.in (osf3*, osf4*, irix6*): include
+	${libname}{release}.so for library_names_spec
+
+1999-01-13  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* configure.in (AC_CONFIG_SUBDIRS): added cdemo
+	* Makefile.am (DIST_SUBDIRS): ditto
+	(ACINCLUDE_M4_LIST): ditto
+	* tests/Makefile.am (TESTS): added cdemo-shared.test
+	* tests/cdemo-static.test: disable shared libraries here
+	* tests/cdemo-shared.test: disable static libraries here
+	* doc/libtool.texi (Test descriptions): added cdemo tests
+	* THANKS: added Edouard G. Parmelan
+
+1999-01-13  Edouard G. Parmelan  <Edouard.Parmelan@France.NCR.COM>
+
+	* ltmain.in: fix convenience libraries when static libraries
+	are disables.
+	* cdemo/README, cdemo/Makefile.am, cdemo/configure.in, cdemo/foo.h,
+	cdemo/foo1.c, cdemo/main.c, cdemo/.cvsignore, test/cdemo-conf.test,
+	test/cdemo-make.test, test/cdemo-exec.test, test/cdemo-static.test:
+	new tests for convenience libraries.
+	* autogen, Makefile.am, test/Makefile.am: ditto.
+
+	* ltconfig.in, doc/PLATFORMS: Added support for NCR MP-RAS
+	(i586-ncr-sysv4.3*) with native compiler.
+	* README, doc/libtool.texi: Added note for NCR MP-RAS compiler.
+
+1999-01-12  Thomas Tanner  <tanner@gmx.de>
+
+	* ltmain.in: before using LN_S remove the symlink
+	* libltdl/ltdl.c: support multiple symbol lists, moved library-
+	  and file searching to separate functions, renamed "preload_libs"
+	  to "dl_dependency_libs", set the LT_SYMBOL_OVERHEAD to the correct
+	  value (7), fix to support lt_dlsym() for not-libtool modules again,
+	  check for invalid handles, when using strdup() check whether
+	  it fails
+	* libltdl/ltdl.h: declare the lt_dlsymlist type for lt_dlpreopen()
+	* mdemo/README: rewritten
+	* mdemo/configure.in: check only for math.h (string.h is no longer
+	  necessary)
+
+1999-01-12  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.in (ltdl-install): Fixed up the indentation so that
+	`configure --help' is pretty again.
+
+1999-01-11  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in, NEWS, doc/libtool.texi: Added support for -R flag
+	* ltmain.in, doc/libtool.texi: documented that -rpath is the same
+	as -R for programs
+	* ltmain.in: softened the instructions for linking with installed
+	libraries, and noted that libtool can be used to link with them;
+	documented that -rpath is not required for convenience libraries
+
+	* ltconfig.in (symxfrm): don't print $pipe_works twice, once for
+	each $ac_symprfx
+	Reported by Godmar Back <gback@cs.utah.edu>
+
+	* ltmain.in (convenience, libobjs): get only .o and .lo files from
+	the files extract from the convenience library.  Some systems,
+	such as FreeBSD2, will add a SYMDEF file, that is not an object
+	file, and therefore should not be fed to the linker
+
+	* libtool.m4 (AM_SYS_NM_PARSE): while we are at it, we may well
+	cache the value of ac_cv_sys_symbol_underscore
+
+	* libtool.m4 (AM_SYS_NM_PARSE): need for underscore prefix is now
+	auto-detected, by trying first without, then with it.
+
+	* ltconfig.in: ditto
+
+1999-01-10  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* configure.in (AC_CONFIG_SUBDIRS): add libltdl, demo, mdemo and
+	depdemo commented out, so that `dist' works before `check'
+	(BUILD_LTDL): will contain libltdl if --enable-ltdl-install
+	* Makefile.am (DIST_SUBDIRS): expand SUBDIRS and add depdemo,
+	commented out
+	(SUBDIRS): add $(BUILT_LTDL)
+	* libltdl/Makefile.am (EXTRA_LTLIBRARIES): add libtest.la, the
+	same as libltdl but always a convenience library.  Not built by
+	default.  Both libraries now depend on the libtool script, that
+	depends on ../libtool and is rebuilt when needed
+	* mdemo/Makefile.am (mdemo, mdemo.debug): depend on and link with
+	../libltdl/libtest.la, that is rebuilt if needed
+	(mdemo_LDADD): removed $(LIBADD_M), to avoid silent failures
+	(foo1.la): renamed from libfoo1.la; test removing the lib prefix
+	* mdemo/foo1.c: renamed libfoo1_LTX symbols to foo1_LTX
+	* mdemo/main.c: don't include string.h nor math.h, nor refer to
+	sin nor cos
+	* tests/mdemo-exec.test: renamed libfoo1.la to foo1.la
+	* tests/mdemo-inst.test: ditto
+
+	* libltdl/ltdl.c (FILENAME_MAX): use it instead of MAX_FILENAME,
+	and don't redefine it if already defined; default to 1024, as on
+	most systems
+	(LT_SYMBOL_LENGTH): renamed from MAX_SYMBOL_LENGTH
+	(LT_SYMBOL_OVERHEAD): new macro, that accounts for the size of
+	the _LTX_ separator and the initial underscore
+	(lt_dlsym): sym now points to a stack buffer (lsym) if possible,
+	or is dynamically allocated.  If allocation fails, a
+	buffer_overflow_error is returned.
+
+1999-01-10  Thomas Tanner  <tanner@gmx.de>
+
+	* ltmain.in: define dld_preloaded_symbols if at least one of
+	  -export-dynamic, -dlopen or -dlpreopen was specified,
+	  do not include program objects in the symbol list
+	  if -export-dynamic was not enabled
+	* libltdl/ltdl.c: limit symbols to max. 256 bytes
+	* mdemo/Makefile.am: build libltdl in a subdirectory,
+	  do not use -export-dynamic for mdemo and mdemo.debug
+	* tests/mdemo-conf.test,tests/mdemo-make.test,tests/mdemo-inst.test:
+	  do not check for libltdl
+
+1999-01-09  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* libltdl/ltdl.c (lt_dlopen): missing strlen in bound test
+
+1999-01-09  Thomas Tanner  <tanner@gmx.de>
+
+	* NEWS: support for BSD/OS 4.x was not documented
+	* demo/Makefile.am: link against libm only if available
+	* mdemo/Makefile.am: likewise, use -avoid-versioning flag
+	  instead of -avoid-version (typo)
+	* demo/configure.in: check for libm, string.h and math.h
+	* mdemo/configure.in: likewise
+	* depdemo/configure.in: check for libm and math.h
+	* libltdl/configure.in: check for dlerror
+	* libltdl/ltdl.c: check for buffer overflows, implemented
+	  dlerror, fixed a severe bug which occured when opening
+	  non-libtool modules, dlopen with the flags GLOBAL and NOW
+	* mdemo/main.c: report the error using lt_dlerror()
+
+1999-01-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (old_archive_from_new_commands): Documented
+	this ltcofig variable.
+
+1999-01-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.sh (cygwin, allow_undefined): Unfortunately, there are
+	problems with this variable when trying to make a dll which has
+	undefined symbols, in which case not even a static library is
+	built.  For now, we need to specify -no-undefined on the libtool
+	link line when we can be certain that all symbols are satisfied,
+	otherwise we get a static library.
+
+1999-01-06  Thomas Tanner  <tanner@gmx.de>
+
+	* ChangeLog: merged in tests/ChangeLog
+	* tests/ChangeLog: deleted
+	* libltdl/ltdl.c: assigned copyright to the FSF
+	* libltdl/ltdl.h, mdemo/foo*,main.c: likewise
+
+1999-01-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in (dllsearchpath): add absolute directory paths to
+	dllsearchpath so that the wrapper scripts can be called from any
+	directory (e.g. tests) on cygwin.
+
+	* ltconfig.in (cygwin, library_names_spec): revert Alexandre's
+	change from yesterday to use `-dll.a' suffix.  That change caused
+	$libname-dll.a to be a symlink to $soname, which isn't even an
+	`ar' archive.  Before the import library suffix can be changed, we
+	need to figure out how to handle building objects differently for
+	linking with an import library versus an equivalent static library.
+
+	* TODO: Added details of a Linux wrapper script bug.
+	Reported by Jeff Garzik <jgarzik@pobox.com>.
+
+1999-01-05  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (libobjs_save, oldobjs): when building an
+	old-fashioned archive, use a copy of libobjs saved before
+	convenience libraries are appended
+
+	* libltdl/ltdl.h (_LTDLL_EXPORT, _LTDLL_IMPORT): use cygwin or
+	unix library import/export primitives; this may be convenient for
+	people willing to create DLLs
+	(_LTDLL_EXTERN): select _LTDLL_EXPORT or _LTDLL_IMPORT depending
+	on _LTDL_COMPILE_
+	* libltdl/ltdl.h, libltdl/ltdl.c (lt_dlpreopen): new function,
+	that replaces the current preloaded_symbols list with its
+	argument, and returns the old value, initially NULL
+	(dldpre_init): don't refer to dld_preloaded_symbols any more
+	(dldpre_open, dldpre_sym): search preloaded_symbols
+	(lt_dlpreopen_default): call lt_dlpreopen with
+	dld_preloaded_symbols, that is declared as extern; it should be
+	called from the main program or from some static library without
+	-no-undefined
+	(lt_dlerror): new function, that returns the error message for the
+	last error occurred; the error message is kept in the static
+	variable last_error
+	* libltdl/configure.in (enable-ltdl-install): moved back from
+	enable-install; other packages might use enable-install already,
+	better have fine grained control over this.
+	* libltdl/Makefile.am (libltdls.la): discarded
+
+1999-01-05  Thomas Tanner  <tanner@gmx.de>
+
+	* configure.in: do not configure libltdl by default
+	* Makefile.am: do not build libltdl by default
+	* libltdl/Makefile.am: ltdls.lo depends on libtool
+	* tests/Makefile.am: before starting the tests
+	  make sure that libtool was build
+	* tests/mdemo-conf.test: configure libltdl
+	* tests/mdemo-make.test: build libltdl
+
+1999-01-05  Alexandre Oliva  <oliva@dcc.unicamp.br>
+
+	* ltmain.in (SP2NL, NL2SP): Don't delete empty lines, as this
+	would lose for files with embedded blanks.
+
+	* ltconfig.in (cygwin, archive_cmds, archive_sym_cmds): Moved
+	ltdll.c into ltmain.in, to avoid its duplication, and added a sed
+	script to extract it.  Also, create def and base files in $objdir,
+	and don't remove them after the compilation.
+	(cygwin, library_names_spec): Create static part of the dll with
+	suffix -dll.a, to avoid conflicts with actual static libraries.
+	* ltmain.in: Added ltdll.c, as commented out text
+
+1999-01-01  Thomas Tanner  <tanner@gmx.de>
+
+	* NEWS: new BeOS support
+	* THANKS: added Joseph Beckenbach
+	* libltdl/ltdl.h: use dllimport/export on Win32
+
+Continued in ChangeLog.1998
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2000 b/ChangeLog.2000
new file mode 100644
index 0000000..364716b
--- /dev/null
+++ b/ChangeLog.2000
@@ -0,0 +1,1327 @@
+2000-12-23  Gary V. Vaughan  <gary@gnu.org>
+
+	From vvv@vsu.ru:
+	* doc/fdl.texi (GNU Free Documentation License): contained @bye
+	command which prevented part of document to be generated (indices,
+	etc).
+	* doc/libtool.texi (Dlpreopening): the @deftypevar did not contain
+	a space after a type.
+
+2000-12-22  Akim Demaille  <akim@epita.fr>
+
+	* libtool.m4: s/[ \t]*$//
+
+2000-12-22  Aneesh Kumar K.V  <kvaneesh@hotmail.com>
+
+	* libtool.m4 (OSF/1):  Revert my patch of 2000-12-16.
+
+2000-12-20  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_dlexit): Was checking for residency of the
+	wrong module.
+	Reported by Robert Boehne  <rboehne@ricardo-us.com>
+
+	* ltmain.in (dlprefiles): Now that `2000-12-15 Utz-Uwe Haus' patch
+	below can detect preopened library deplibs correctly in libltdl,
+	we need to ensure that libtool library deplibs are also preloaded
+	into the binary for that phase to work.
+
+2000-12-16  Aneesh Kumar K.V  <kvaneesh@hotmail.com>
+
+	* libtool.m4 (OSF/1): Change the way to pass linker flags through
+	compiler on a Tru64 machine.
+
+2000-12-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (sys_lib_search_path_spec): Use test instead of
+	`['.
+	(archive_cmds): And another one.
+
+	* libtool.m4 (darwin*): Fixed a pair of stupid typos I made in the
+	last patch.
+
+	* libtool.m4 (AC_DEPLIBS_CHECK_METHOD):  moved rogue settings from
+	sequent, ncr and newos6 back into here from other macros.
+
+2000-12-16   Wilfredo Sanchez  <wsanchez@apple.com>
+
+	* libtool.m4: (dyld/darwin*) Much improved port.
+	* ltmain.in: (dyld/darwin*) Much improved port.
+
+2000-12-16  Sascha Schumann <sascha@schumann.cx>
+
+	* libtool.m4: Accept darwin as an alias for rhapsody.
+	* ltmain.in: ditto.
+
+	* libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Use the HPUX 10.20
+	methods to check for library dependencies on HPUX 11.
+
+2000-12-16  Nick Hudson  <skrll@netbsd.org>
+
+	* libtool.m4 (netbsd*, deplibs_check_method): Enable ILD support
+	for NetBSD a.out.
+
+2000-12-15  Akim Demaille  <akim@epita.fr>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE): Rename
+	`ac_cv_sys_global_symbol_pipe' as `lt_cv_sys_global_symbol_pipe'.
+	Similarly with `lt_cv_global_symbol_to_cdecl
+	(_LT_AC_LTCONFIG_HACK): Similarly with `ac_cv_prog_cc_pic',
+	`ac_cv_prog_cc_shlib', `ac_cv_prog_cc_wl', `ac_cv_prog_cc_static',
+	`ac_cv_prog_cc_no_builtin', `ac_cv_prog_cc_can_build_shared',
+	`ac_cv_prog_cc_static_works', `ac_cv_archive_cmds_need_lc'.
+	(AC_PATH_TOOL_PREFIX): Similarly with `ac_cv_path_MAGIC_CMD'
+	(AC_PROG_LD) <ac_cv_path_LD>: Likewise.
+	(AC_PROG_LD_GNU) <ac_cv_prog_gnu_ld>: Likewise.
+	(AC_PROG_NM) <ac_cv_path_NM>: Likewise.
+
+2000-12-15  Utz-Uwe Haus  <haus@mail.math.uni-magdeburg.de>
+
+	* libltdl/ltdl.c (lt_dlopen): Changed "dl_dependency_libs" keyword
+	to "dependency_libs".
+
+2000-12-14  Tod Milam  <tmilam@traclabs.com>
+
+	* libltdl/ltdl.c (lt_dlexit): Reset the loaders value to zero when
+	the last module has been unloaded.
+
+2000-12-14  Michael Schmitz  <mschmitz@iname.com>
+
+	* libtool.m4: Port to *-sni-sysv4 (Reliant Unix)
+	* README: added Reliant Unix to hte list of supported platforms
+	* doc/PLATFORMS: added note on tests on Reliant Unix
+
+2000-12-14  Masahiro Nobori  <nobori@ss.titech.ac.jp>
+
+	* README:  Updated.
+	* NEWS: Updated.
+	* libtool.m4:  New port to NEWS-OS Release 6.
+
+2000-12-14  Nick Hudson  <skrll@netbsd.org>
+
+	* libtool.m4 (hardcode_libdir_flag_spec):  Remove linker
+	specification for netbsd.
+
+2000-12-14  Akim Demaille  <akim@epita.fr>
+
+	* libtool.m4:  Don't depend on Autoconf internals:
+	s/ac_cv_prog_gcc/GCC/.
+
+2000-12-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE): Don't empty
+	out ac_cv_global_symbol_to_cdecl inside the loop, incase we
+	need to go around again and try with underscore prefix.
+	(_LT_AC_TRY_DLOPEN_SELF): On some hosts (cygwin for instance)
+	self dlclosing unloads the main program and causes a SIGSEGV.  So
+	don't do it for now.
+
+2000-12-05  Gary V. Vaughan  <gary@gnu.org>
+
+	Oh My! Cygwin support has bitrotted while I was looking the other
+	way.  This should fix it some:
+	* libtool.m4 (extract_expsyms_cmds): There is a quoting problem
+	with autoconf-2.13 that prevents [$]0 from expanding.  Use shell
+	quotes instead to delay eval of $0.
+	(impgen.c) The '# ' sequence stripped by sed works again.
+
+2000-12-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (Libltdl interface):  Add documentation.
+	* libltdl/ltdl.h (lt_dlmakeresident, lt_dlisresident):  Add
+	prototypes.
+	(LT_DLERROR_CLOSE_RESIDENT_MODULE): New error status.
+	* libltdl/ltdl.c (lt_dlmakeresident, lt_dlisresident):  Allow
+	making and testing of resident module status, which prevents a
+	module from being lt_dlclosed.
+	(lt_dlopen):  If lt_dlopen()ing self, make the module resident.
+	(lt_dlclose):  Return an error if the module is resident.
+
+	* libtool.m4 (_LT_AC_LTCONFIG_HACK): Move the tests for dlopen
+	from here...
+	(AC_LIBTOOL_DLOPEN_SELF): ...to here.
+	(_LT_AC_CHECK_DLFCN):  Factor out repeated code for dlfcn.h
+	(_LT_AC_TRY_DLOPEN_SELF): Factor out repeated code for
+	checking dlopen status.
+	* ltdl.m4 (AC_LIB_LTDL):  Use _LT_AC_CHECK_DLFCN.
+	dlopen compile time checking.  Use _LT_AC_CHECK_DLFCN.
+	(AC_LTDL_DLSYM_USCORE):  Use _LT_AC_TRY_DLOPEN_SELF.
+
+2000-11-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.h (lt_dlhandle): Rename the wrapped structure
+	to prevent nameclash when used from C++.
+	* libltdl/ltdl.c: Fixed all references.
+
+2000-11-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_dlopen):  Change the default search order
+	for modules.  If the named module has no directory component,
+	always start the search with the user_search_path directories,
+	and then fall back on the current directory only if that fails.
+
+2000-11-20  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/Makefile.am (libltdl_la_LDFLAGS): increment the version
+	number to reflect the breakage of binary compatibility.
+	* doc/libtool.texi (Libltdl interface):  Document
+	LT_NON_POSIX_NAMESPACE.
+	* libltdl/ltdl.h (LT_POSIX_NAMESPACE):  Deleted.  The default is
+	now to use this namespace, so the cpp macro is no longer
+	necessary.
+
+2000-11-20  Morten Eriksen  <mortene@sim.no>
+
+	* ltdl.m4 (AC_LIB_LTDL, AC_LTDL_SYMBOL_USCORE): Break a circular
+	dependency between AC_LTDL_SYMBOL_USCORE and AC_LTDL_DLSYM_USCORE.
+
+2000-11-20  Paul Berrevoets  <paul@swi.com>
+
+	* ltmain.in: Some versions of expr respond with "0" if a
+	regexp fails to match.
+
+2000-11-19  Paul Berrevoets  <paul@swi.com>
+
+	* libtool.m4 (_LT_AC_LTCONFIG_HACK): Quote the $ in $#, $2 and
+	$3 in variable 'archive_expsym_cmds' for cygwin.
+
+2000-11-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltdl.c: Relegate non-POSIX-compliant symbols (e.g. those
+	ending in ``_t'') to deprecated #define compatibility macros.
+	Also ease up on the namespace pollution, so that only ``lt_''
+	and ``LT_'' prefixes are taken from the global namespace.
+	* ltdl.h: ditto.
+
+2000-11-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltdl.c: Reformatted.
+	* ltdl.h: ditto.
+
+2000-11-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltdl.m4 (AC_LTDL_SYMBOL_USCORE): Use $ac_ext for conftest
+	sourcefile.
+	* libtool.m4: Use $ac_ext and $ac_objext respectively for conftest
+	sources and objects.
+	Reported by Carlo Wood <carlo@alinoe.com>
+
+	* doc/fdl.texi: New file.  The license for distributing the
+	libtool manual.
+	* doc/libtool.texi: Reference the new license.
+
+2000-10-31  Morten Eriksen  <mortene@sim.no>
+
+	* libtool.m4 (_LT_AC_LTCONFIG_HACK): Quote argument to avoid
+	error output from cygpath when $srcdir is empty.
+
+2000-10-31  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap:  rm Makefiles to prevent infinite loop during
+	configure when libtool.m4 is newer than Makefile.
+
+2000-10-31  Akim Demaille  <akim@epita.fr>
+
+	* libtool.m4: Adjust the copyright notice.
+	Quote all the macro names when defined.
+	Some minor formatting changes.
+	(AM_PROG_LIBTOOL, AM_ENABLE_SHARED, AM_ENABLE_STATIC)
+	(AM_DISABLE_SHARED, AM_DISABLE_STATIC, AM_PROG_LD, AM_PROG_NM):
+	Don't use indir when useless.  Don't add trailing `dnl' either.
+
+2000-10-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi:  Corrected another attack of CRLF line
+	endings.
+
+2000-10-30  Ossama Othman  <ossama@debian.org>
+
+	* libtool.m4 (archive_expsym_cmds): Fix typo where line was broken
+	in the middle of an expression.
+
+2000-10-30  Aneesh Kumar K.V <kvaneesh@hotmail.com>
+
+	* libtool.m4 (archive_expsym_cmds):  Support for -export-symbol
+	option on Tru64.
+	(hardcode_libdir_flag_spec): Fixed cxx throwing error while using
+	libtool.  Done by passing -rpath directlty to the compiler.
+
+2000-10-27  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* docs/libtool.texi: Added pointers to documentation
+	of Hewlett-Packard, Compaq Tru64 and IBM AIX systems.
+
+2000-10-02  Gary V. Vaughan  <gary@gnu.org>
+
+	From Bruce Korb <bkorb@cruzio.com>
+	* ltmain.in (execute_dlfiles): Reduce obfuscation.
+
+2000-09-30  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 [netbsd*] (deplibs_check_method, file_magic_cmd,
+	file_magic_test_file): Removed inappropriate duplicate
+	definitions; these variables are set in AC_DEPLIBS_CHECK_METHOD.
+
+	* libtool.m4 (lt_cv_file_magic_cmd): Don't use '${MAGIC_CMD}' or
+	'${OBJDUMP}'; Solaris' /bin/sh loses with `}' in cache files.
+	(ac_cv_path_MAGIC_CMD): Renamed to lt_cv_path_MAGIC_CMD.
+
+2000-09-28  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (MAGIC_CMD): Don't use MAGIC, since BSD versions of
+	the file command use this environment variable to hold the
+	location of the magic database.
+	Reported by Marc Espie <Marc.Espie@liafa.jussieu.fr>
+
+2000-09-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/PLATFORMS: Updated.
+	* demo/configure.in:  Revert to the `libtool --features' test.
+	* Makefile.am (libtool):  This needs to rerun configure now that
+	libtool is generated entirely by AC_PROG_LIBTOOL again.
+	(ltconfig): Removed.
+	(ltmain.sh):  Is now regenerated when ltmain.in changes.
+	* libtool.m4 (_LT_AC_LTCONFIG_HACK): Now does all of the work for
+	generating libtool immediately in configure.in, rather than
+	deferring part of the creation until config.status runs.
+
+2000-09-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap:  Backed out yesterdays patch which is no longer
+	necessary.
+	* Makefile.am (libtool): Reworked rule for regeneration of libtool,
+	now that it is built entirely withing config.status.
+	(libtoolize): Tidied for orthogonality with the other generation
+	rules.
+	(ltconfig):  This is now generated by AC_PROG_LIBTOOL, called from
+	make by running config.status --recheck.
+	(ltmain.sh): Moved primary generation of this file into here...
+	* configure.in (AC_OUTPUT): ...instead of here.
+	* libtool.m4 (AC_OUTPUT_COMMANDS):  Write the config to ltconfig
+	where it can be reused, rather than directly to libtool.
+	* demo/configure.in:  libtool is no longer present immediately
+	after AC_LIBTOOL_M4 has completed, so the tests now grep through
+	ltconfig instead -- which *will* be present.
+
+2000-09-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* TODO: Removed the item describing the change below, and added a
+	similar item to remind us to change the ltdl.m4 macros again when
+	_LT_AC_LTCONFIG_HACK is divided into proper macros.
+	* ltdl.m4 (AC_LTDL_SNARF_CONFIG):  Removed.  No longet required
+	now that ltconfig has migrated to libtool.m4.
+	(AC_LTDL_SHLIBEXT): Require _LT_AC_LTCONFIG_HACK.
+	(AC_LTDL_SHLIBPATH): ditto.
+	(AC_LTDL_SYSSEARCHPATH): ditto.
+
+	* ltdl.m4 (AC_LTDL_DLPREOPEN): Require the libtool.m4 symbol_pipe
+	macro.
+	(AC_LTDL_SYMBOL_USCORE): ditto.
+	(AC_LTDL_GLOBAL_SYMBOL_PIPE): Removed, since it is a duplicate
+	of...
+	* libtool.m4 (AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE): ...this new
+	macro, extracted from _LT_AC_LTCONFIG_HACK.
+
+	* ltdl.m4 (changequote): An audit of changequote and m4
+	quote usage -- all changequotes have been removed, and some
+	latent unquoted `[' and `]' bugs have been fixed.
+
+	* configure.in (AC_OUTPUT): ltmain.sh must be generated in the
+	source tree since this is where it would be found in a freshly
+	unrolled tarball.
+
+	* configure.in: Replace `dnl' comments with `#' comments for
+	more conformity with cvs autoconf.
+	Removed emacs hack-local-variables, since there is now a
+	proper Autoconf major mode.
+	Removed a couple of changequote()s.
+
+	* bootstrap (ltconfig): When bootstrapping libtool with a
+	stock automake (i.e. without the README patch applied),
+	references to ltconfig are manually removed from the generated
+	Makefile.in files.
+
+2000-09-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi: Removes references to ltconfig, and a small
+	amount of tidying up to compensate.
+
+2000-09-15  Nick Hudson  <skrll@netbsd.org>
+
+	* libtool.m4 (netbsd): Improved support.
+
+2000-09-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in (version_type): Use "-iface" as the windows
+	versioning scheme, where iface is the number of the oldest
+	interface supported.
+
+2000-09-14  Gary V. Vaughan  <gary@gnu.org>
+
+	From Paul Sokolovsky <Paul.Sokolovsky@technologist.com>
+	* libtool.m4 (pw32): Initial support for pw32, assuming that
+	libtool's behaviour in this environment is identical to under
+	cygwin.
+	* ltmain.in (pw32): ditto.
+	* NEWS: Updated.
+
+	* libtool.m4 (changequote): An audit of changequote and m4
+	quote usage -- all changequotes (except a few with non-nesting
+	square brackets) have been removed.
+
+	* Makefile.am (EXTRA_DIST):  The bootstrap script should be
+	distributed with libtool.
+
+2000-09-13  Gary V. Vaughan  <gary@gnu.org>
+
+	libtool.m4 (_LT_AC_LTCONFIG_HACK): Oh man!  Third time lucky.
+	I just discovered that '&' needs to be escaped inside
+	AC_TRY_EVAL.
+
+2000-09-12  Michael Matz  <matz@ifh.de>
+
+	* ltmain.in:  Be careful about filenames with multiple `.'s in
+	them when calculating file extensions.
+	Reported by Joel Reed <jreed@support.ddiworld.com>
+
+2000-09-12  Gary V. Vaughan  <gary@gnu.org>
+
+	libtool.m4 (AC_PROG_LIBTOOL):  Removed, as it was triggering a
+	bug in Autoconf-2.13 AC_REQUIRE implementation which inserted
+	some of the expanded tests too early in the generaated configure.
+	(_AC_PROG_LIBTOOL): renamed to AC_PROG_LIBTOOL, and defines
+	itself to an empty expansion to prevent multiple expansions.
+	configure.in (AC_LIBTOOL_SETUP): Replaced by a call to
+	AC_PROG_LIBTOOL now that the AC_REQUIRE bug has been worked
+	around.
+
+2000-09-09  Gary V. Vaughan  <gary@gnu.org>
+
+	libtool.m4 (_LT_AC_LTCONFIG_HACK): Forgot to escape the
+	redirections inside AC_TRY_EVAL in the need_lc tests. Doh!
+
+	libtool.m4 (_LT_AC_LTCONFIG_HACK): Forgot to redirect the
+	output of grep to /dev/null in the need_lc tests.
+
+	configure.in (AC_PROG_LIBTOOL):  Using this in libtools own
+	configure.in interacts badly with the AC_PROVIDE calls and
+	results in several tests being inserted into configure too
+	early.  Use AC_LIBTOOL_SETUP instead.
+
+2000-09-08  Gary V. Vaughan  <gary@gnu.org>
+
+	libtool.m4 (_LT_AC_LTCONFIG_HACK): The ltconfig.in code I
+	ported from ltconfig.in was incomplete -- this is a backport
+	of the missing code taken from the multi-language branch.
+
+2000-09-07  Pavel Roskin  <proskin@gnu.org>
+
+	* libtool.m4 (_LT_AC_LTCONFIG_HACK):  Fixed incorrect use of
+	changequote
+
+2000-09-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS:  Updated.
+	* TODO:  Add a reminder to get rid of ltconfig in mlb.
+	* README: Until things even out, I have added a note and a
+	patch to make the installed automake cooperate with the new
+	ltconfig free libtool.
+
+	* libtool.m4 (_LT_AC_LTCONFIG_HACK): with_gcc is only useful in
+	ltmain.sh as it has not yet been set in libtool.m4.  Use
+	$ac_cv_prog_gcc instead.
+
+	* doc/PLATFORMS: Updated.
+
+	* configure.in (AC_PROG_AWK): Removed -- no longer required by
+	the build process.
+	* lineno: ditto.
+
+	* libtoolize.in (files): Don't try to install ltconfig -- it
+	doesn't exist!!
+	* bootstrap: Fake an ltconfig incase the installed automake
+	calls an installed libtoolize (as part of its --add-missing
+	process) which thinks ltconfig should be there.
+
+	* libtool.m4 (_LT_AC_LTCONFIG_HACK): Deleted a vital `;;'
+	terminator from a case statement by mistake.
+
+	* Makefile.am (ltmain.sh):  Make this depend on TSDEPS again
+	so that the Changelog timestamp is used for ltmain.sh at `make
+	dist' time.
+
+2000-09-06  Gary V. Vaughan  <gary@gnu.org>
+
+	libtool.m4 now contains a version of the code that used to run
+	from ltconfig, so that ltmain.sh and then libtool are
+	generated at configure time.
+
+	* Makefile.am:  Don't generate ltmain.sh or ltconfig anymore.
+	* bootstrap: ltconfig is no more!
+	* configure.in: Call AC_PROG_LIBTOOL directly.
+	(AC_OUTPUT): Generate tmain.sh.
+	* libtool.m4: Don't build an argument list for ltconfig.
+	(_LT_AC_LTCONFIG_HACK):  Refactoring of the former contents of
+	ltconfig.in to take advantage of the m4 macros from autoconf.
+	* ltmain.in: Don't do a version check against ltconfig.
+	* tests/assign.test: Remove reference to ltconfig.
+	* tests/hardcode.test: ditto.
+	* tests/sh.test: ditto.
+
+2000-09-05  Alexandre Oliva  <aoliva@redhat.com>
+
+	* depdemo/main.c: Support -alt.
+	* tests/build-relink2.test: Try it.
+
+	* ltconfig.in: Removed all references to what used to be
+	hardcode_into_libs=all.  2000-09-03's patch was wrong.
+	* ltmain.in: Likewise.
+	* tests/build-relink.test, tests/build-relink2.test: Adjust.
+	* mdemo/Makefile.am (lib_LTLIBRARIES): Move libsub.la before
+	libfoo2.la, so that they're installed in the right order.
+
+2000-09-04  Alexandre Oliva  <aoliva@redhat.com>
+
+	* tests/dryrun.test: Build libsub.la along with the object files,
+	since it is needed by libfoo2.la.
+
+	* mdemo/Makefile.am: Mark only libfoo2 as -no-undefined.
+	Explicitly link it with libsub.la.
+
+	* ltconfig.in (need_lc): Preserve allow_undefined_flag.
+
+	* tests/*.test (CONFIG_SITE): Ultrix's /bin/sh fails on
+	`. /dev/null'.  Set CONFIG_SITE to /dev/null/config/site, to make
+	sure we pick a non-existent file.
+
+	* Makefile.am (libtool, clibtool): Pass CONFIG_SHELL along with
+	ECHO down to ltconfig.
+
+	* ltconfig.in (hardcode_libdir_flag_spec, export_dynamic_flag_spec):
+	Use ${wl}, not ${wlarc}.
+
+	* ltmain.in (compile, need_lock): Don't create nor remove lock
+	files in dry runs.
+
+	* libltdl/ltdl.c (load_deplibs): Don't append shlib_ext; use
+	lt_dlopenext() instead.
+
+	* ltmain.in (link -static): Don't add $link_static_flag; only
+	-all-static should do that.
+	* mdemo/configure.in: Revert part of the previous delta.
+
+	* mdemo/configure.in: Don't use -static on AIX4.1.
+	* mdemo/Makefile.am: Likewise.
+
+2000-09-03  Alexandre Oliva  <aoliva@redhat.com>
+
+	* ltconfig.in: Get rid of hardcode_into_libs=all; use
+	hardcode_into_libs=yes && shlibpath_overrides_runpath!=yes
+	instead.
+	[FreeBSD 3.[01]] (shlibpath_overrides_runpath): Set to no.
+	* ltmain.in: Likewise.
+	* tests/build-relink.test, tests/build-relink2.test: Adjust.
+
+	* libtool.m4: Fix typo I introduced in yesterday's patch.
+
+	* libltdl/ltdl.c (lt_dlopen): Set dlname from library_names if
+	dlname is empty.
+
+	* ltdl.m4 (HAVE_LIBDL): Look for dlopen in -lsvld.
+	* ltconfig.in: Likewise.
+
+	* tests/mdemo-exec.test: Modify failure message.
+
+	* ltmain.in (newdlprefiles): Use dlname if it's available and
+	old_library isn't; use linklib only if dlname is not available.
+
+	* ltconfig.in (enable_dlopen): Set to no when lt_cv_dlopen is no.
+
+	* libtool.m4: Don't quote CONFIG_SHELL nor ORIGINAL_CONFIG_SHELL.
+	Quote $@ properly so that the shell expands it, not m4.
+
+	* libtool.m4: Don't quote SHELL when `re-exec'ing, so that SHELL
+	can be `/path/to/shell -x'.
+
+	* tests/quote.test: Move the match test out of case statements, to
+	work around bug in /bin/sh of several OSs.
+
+	* ltmain.in (variables_saved_for_relink): Attempt to unset them
+	instead of setting them to an empty string.
+
+2000-09-02  Alexandre Oliva  <aoliva@redhat.com>
+
+	* ltconfig.in [with_gnu_ld] (archive_cmds, archive_expsym_cmds)
+	<solaris*, sysv5*, beos*>: Use compiler_flags instead of linker
+	flags.
+	Reported by Alex Hornby <alex@anvil.co.uk>
+
+2000-09-02  Makoto Ishisone  <ishisone@sra.co.jp>
+
+	* libtool.m4 (lt_cv_deplibs_check_method, freebsd): Fix typo,
+	add support for compact format library.
+
+2000-09-02  Alexandre Oliva  <aoliva@redhat.com>
+
+	* ltdl.m4: Oops, I had forgotten to commit this part of Syd Polk's
+	patch from 2000-06-17.
+
+2000-09-02  Tom Kacvinsky  <tjk@ams.org>, Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu>
+
+	* libtool.m4: Ignore Tru64's nm's complaint.
+
+2000-09-02  Pavel Roskin <proski@gnu.org>
+
+	* ltconfig.in: only load $cache_file if it's a regular file
+
+2000-09-02  Assar Westerlund  <assar@sics.se>
+
+	* ltconfig.in: Add back ranlib calls for static libraries if there
+	is a ranlib.
+
+2000-08-31  Gary V. Vaughan  <gary@gnu.org>
+
+	Move the echo detection code to a macro in libtool.m4.  The code
+	at the top ofltconfig.in is ugly, but will go away when the rest
+	of ltconfig is migrated.
+
+	* Makefile.am (libtool):  Pass the value of $ECHO to ltconfig as
+	an environment variable.
+	* libtool.m4 (_LT_AC_PROG_ECHO_BACKSLASH): Quote the ECHO value
+	correctly so that it inserts the correct code into configure.in
+	suitably quoted for M4 expansion.  This code needs to be near
+	the top of configure.in as it calls itself recursively, so I
+	am using AC_DIVERSION_NOTICE (or simply NOTICE on CVS
+	Autoconf).  The value of ECHO is also substitued into the
+	Makefile to be used when Make calls ltconfig to generate
+	libtool, so another layer of quotation is required for the
+	Makefile.
+	(AC_LIBTOOL_SETUP):  Use it.
+	* ltconfig.in: Accept a value for ECHO from the environment, and
+	carefully substitue for $0 if it is present in the ECHO value.
+	Because ECHO was quoted for Make, when ltconfig is called by
+	configure, it is overquoted, and one layer of quotes must be
+	stripped.
+
+2000-08-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (with_gcc):  Make the value of this option
+	available to the generated libtool script.
+	* ltmain.in (compile_command, finalize_command):  The native C
+	and C++ compilers on IRIX require the -LANG:std in order to to
+	compile correctly.   The same options should _not_ be passed
+	through to gcc on IRIX, or at all on other architectures for
+	backwards compatibility (among others).
+	Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+	Reported by Albert Chin-A-Young <china@thewrittenword.com>
+
+2000-08-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (old_reload_flag): typo.
+
+2000-08-01  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* ltmain.in (shtool): Use echo|grep instead of expr, as in the
+	original patch.
+
+2000-08-01  Alexandre Oliva  <aoliva@redhat.com>
+
+	* ltconfig.in (need_lc): Fix test message.
+
+2000-07-24  Mocha  <netbsd_alpha@yahoo.com>
+
+	* ltconfig.in (NetBSD, deplibs_check_method): Use file_magic.
+	(NetBSD, file_magic_cmd, file_magic_test_file): Set.
+
+2000-07-24  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>, David Kaelbling  <drk@orchietta.hudson.sgi.com>
+
+	* ltmain.in (irix, major): Prepend a `.'.
+	* ltconfig.in (irix, soname_spec, library_names_spec): Adjust.
+
+2000-07-24  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>, Ralf S. Engelschall  <rse@engelschall.com>
+
+	* ltmain.in: Support GNU shtool's install.
+
+2000-07-24  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* ltconfig.in (linkopts): Don't set for test.
+
+2000-07-24  Nick Hudson <skrll@netbsd.org>
+
+	* ltconfig.in (linkopts): Replace with linker_flags.
+
+	* ltmain.in (ILD): Fix addition of deplibs in relink case.
+
+2000-07-18  H.J. Lu  <hjl@gnu.org>
+
+	* ltconfig.in: Check if -lc is necessary for building shared
+	library. Set build_libtool_need_lc to indicate it.
+	* ltmain.in: Add -lc when building shared library only if
+	necessary.
+
+2000-07-10  Mo DeJong  <mdejong@redhat.com>
+
+	* libtool.m4 (AC_PROG_NM): Fix macro so that it
+	finds a cross NM on the PATH.
+
+2000-07-10  Ken Block <block@zk3.dec.com>
+
+	* libltdl/ltdl.h: Also check for __cplusplus, __STDC__ is not
+	by Compaq C++ compiler
+
+2000-07-10  Alexandre Oliva  <aoliva@lsd.ic.unicamp.br>
+
+	* ltconfig.in (wlarc, netbsd, aout): Set to empty.
+	(hardcode_dynamic_flag_spec, export_dynamic_flag_spec): Use it.
+
+	* ltconfig.in (dynamic_linker, linux, powerpc): Do not disable
+	shared libraries just because of MkLinux.
+
+	* libtool.m4 (lt_cv_deplibs_check_method, freebsd): Do not depend
+	on $version_type; check for ELF support as in other BSDs.
+
+2000-06-17  Syd Polk  <spolk@redhat.com>
+
+	* libtool.m4 (AC_LIBTOOL_SETUP): Do not generate a libtool based
+	on target; use host instead.
+
+2000-05-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (ORIGINAL_CONFIG_SHELL): Prevent lossage when
+	the echo probing code falls into this branch without setting
+	this variable.
+
+	* ltconfig.in (netbsd*): archive_cmds and archive_expsym_cmds
+	were reversed with respect to definition of __ELF__.
+	From Keisuke Inoue <keisuke@csl.sony.co.jp>
+
+2000-05-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (netbsd*): Use -L option to file_magic_cmd as for
+	freebsd (below).
+	* libtool.m4 (netbsd ELF): support file_magic.
+	From Dan Winship <danw@helixcode.com>.
+
+2000-05-29  Steven M. Schultz <sms@moe.2bsd.com>
+
+	* libtool.m4 (bsdi4*): Add -L option to bsdi4's file_magic_cmd
+	command.  Under BSD/OS 4.1 several libraries are now symlinks
+	rather than regular files.  Adding -L tells the file program
+	to follow the symlink.
+
+2000-05-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (i*86-*-freebsd*): Forgot to changequote(,).
+
+	* NEWS: Updated.
+	* libtool.m4 (i*86-*-freebsd*): Support a.out shared libs.
+	From <suzukis@file.phys.tohoku.ac.jp>
+
+2000-05-29  Fred Fish  <fnf@be.com>
+
+	Support AR=mwld AR_FLAGS='-xml -o' for PPC Beos.
+	* ltconfig (old_AR_FLAGS): Add.
+	(old_archive_cmds): Use AR_FLAGS rather than hardcoding "cru".
+	(archive_cmds): Use AR_FLAGS rather than hardcoding "cru".
+	(AR_FLAGS): Default to "cru" if not set.
+
+2000-05-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (echo): The following code actually prints the
+	double quotes -- so I removed them:
+	    echo='printf "%s\n"' /bin/ksh -c '$echo \\t'
+	From Tuukka Toivonen <tutoivon@mail.student.oulu.fi>
+
+	* NEWS: Updated.
+
+2000-05-29  Bernhard Rosenkraenzer <bero@redhat.de>
+
+	* libtool.m4: adding ia64 as supported linux platform
+
+2000-05-29  Michael Matz  <matz@ifh.de>
+
+	* ltmain.in: fix quoting for $var_value.
+
+	* ltconfig.in: check for dlfcn.h: include return value
+	to make -Wall in CFLAGS work.
+
+2000-05-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* README-alpha: note new location of config.(guess|sub).
+
+2000-05-27  Chad Cunningham  <ccunning@math.ohio-state.edu>
+
+	* ltconfig.in (rhapsody*): New Port.
+	* ltmain.in (rhapsody*): ditto.
+
+2000-05-27  Chris Lattner  <sabre@skylab.org>
+
+	* ltconfig.in (*-sequent-sysv4): New Port.
+
+2000-05-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in: cygwin-1.1.0 and higher no longer grok backslash path
+	separators.
+
+2000-05-14  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* libtool.m4 (AC_LIBLTDL_CONVENIENCE, AC_LIBLTDL_INSTALLABLE):
+	Pick LIBLTLD from top_builddir and INCLTDL from top_srcdir.
+	* mdemo/configure.in: Remove comments on
+	AC_LIBLTLD_CONVENIENCE.
+
+	* libtool.m4 (_AC_PROG_LIBTOOL): Renamed from...
+	(AC_PROG_LIBTOOL): Just AC_REQUIRE(_AC_PROG_LIBTOOL), to avoid
+	effects of multiple runs.
+
+2000-05-11  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: update
+	* doc/libtool.texi (libltdl): rename lt_(find|next|add|remove)_dlloader
+	  to lt_dlloader_*
+	* libltdl/ltdl.c: ditto
+	* libltdl/ltdl.h: ditto, add declaration of lt_dlloader_(find|remove)
+
+2000-05-06  Pavel Roskin  <pavel_roskin@geocities.com>
+
+	* libltdl/ltdl.c: Typo.
+
+	* libtool.m4 (AC_LIBTOOL_SETUP): CVS autoconf no longer sets
+	target to "NONE", but to an empty string.
+
+2000-05-05  Paul Sokolovsky  <Paul.Sokolovsky@technologist.com>
+
+	* ltdl.c: support lt_dlopen(0) for win32
+
+2000-05-03  Thomas Tanner  <tanner@ffii.org>
+
+	* doc/libtool.texi (libltdl): fix typos,
+	  INCLTDL starts with top_srcdir, replace NULL with @code{NULL}
+
+	* ltmain.in (ILD): search in newlib_search_path, too
+
+	* ltmain.in (ILD): fix bugs in conv pass, expand convenience
+	  libs to deplibs and link them later on
+
+	* ltmain.in (ILD): don't allow convenience libs to be
+	   -dlopen/preopen'ed
+
+	* ltmain.in (ILD): it's not required to link all deplibs
+	  in fast-install mode
+
+	* ltmain.in (ILD): if hardcode_into_libs=all, only relink
+	  a library if it is linked against uninstalled libtool libraries,
+	  rename link_against_libtool_libs to uninst_deplibs
+
+	* ltmain.in (ILD): tidy up, add some comments
+
+2000-05-03  John Wehle  (john@feith.com)
+
+	* libtool.m4 (hpux10.20*): use file_magic for
+	inter-library dependency tracking.
+
+2000-05-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* AUTHORS:  Update my email address.
+	* commit: ditto.
+
+2000-04-11  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: update
+	* libtool.m4: add AC_LIBTOOL_PICMODE
+	* ltconfig.in: move pic_mode checks to ltmain.in
+	* ltmain.in: add -prefer-pic and -prefer-non-pic
+
+2000-03-29  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* ltmain.in (tmpdir): Do not accept an existing directory, and
+	force its mode to 700, for security reasons.
+	Reported by Joseph S. Myers <jsm28@cam.ac.uk>
+
+2000-03-27  Thomas Tanner  <tanner@ffii.org>
+
+	* NEWS: reformatting
+
+	* ltmain.in (ILD): add extra convenience library scanning pass
+
+	* ltmain.in (ILD): accept -R flags for libraries, too
+
+	* ltmain.in (ILD): correclty merge the dlpreopened libraries
+	  with deplibs
+
+	* ltmain.in (install mode): remove directories from filenames
+	  before relinking (reported by Elrond <Elrond@Wunder-Nett.org>)
+
+	* doc/libtool.texi (libltdl): rename Library -> Lesser,
+	  clarify exception clause
+	* libltdl/ltdl.c, libltdl.h (License): ditto
+
+2000-03-21  Alexandre Oliva  <oliva@lsd.ic.unicamp.br>
+
+	* ltconfig.in (variables_saved_for_relink): Set to `PATH
+	$shlibpath_var $runpath_var'.  If with_gcc, add gcc-related
+	environment variables.  Add it to the configuration section.
+	* ltmain.in (relink_command): Expand those variables.
+
+2000-03-14  Christopher A. Knight  <chriskn@crt.com>
+
+	* ltconfig.in: added main() definition in compile
+	check for header `dlfcn.h' to fix link errors
+	when built with Sun Workshop Pro CC 4.2 (and perhaps
+	others).
+
+2000-02-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_find_dlhandle): Deleted.  This was B.S.
+	far cleaner to use lt_dlforeach and lt_dlgetinfo.
+	* libltdl/ltdl.h:  Prototype deleted.
+	* doc/libtool.texi: Documentation deleted.
+	* NEWS: annoncement deleted.
+
+2000-02-23  Thomas Tanner  <tanner@ffii.org>
+
+	* ltmain.in: remove duplicates from deplibs, handle
+	  interdependent libraries (e.g. -la -lb -la),
+	  this requires adding deplibs in reverse order
+
+	* ltmain.in: link dlpreopened libraries before other libraries
+	  (reported by Pavel Roskin)
+	* mdemo/Makefile.am: build and link libsub.la
+	* mdemo/sub.c: new file used by both dlopened modules
+	* mdemo/foo*: use sub() defined in libsub
+	* tests/dryrun.test: build libsub.la
+
+	* mdemo/Makefile.am: always link mdemo.static with -static
+	* mdemo/configure.in: ditto
+
+	* ltmain.in: fix dlopen/dlpreopening of objects
+
+	* ltmain.in (ILD): fix misplaced `continue' in -R* argument handler
+
+	* ltmain.in: merge duplicated code of clean and uninstall mode
+
+	* libtool.m4: recognize powerpc*linux* (reported by
+	  Dirk A. Mueller <dmuell@gmx.net>)
+
+2000-02-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (old_MAGIC, old_STRIP, old_reload_flag,
+	old_deplibs_check_method, old_file_magic_cmd):  New variabes.
+	Treat these as old_CC etc.
+	(STRIP, MAGIC): Create and set these variables in the generated
+	libtool script.
+	Reported by Pavel Roskin <pavel_rosin@geocities.com>
+
+	* configure.in: Due to a bug in autoconf-2.13 implementation of
+	AC_SUBST, `AC_SUBST(FILE)' can never work.  Use MAGIC as the
+	holder of the command to run in file_magic_cmd instead.
+	* ltconfig.in: s/FILE/MAGIC/g.
+	* libtool.m4 (AC_PROG_LIBTOOL): set MAGIC in the environment when
+	calling ltconfig.
+	(AC_PATH_MAGIC):  renamed from AC_PATH_FILE.
+	(AC_PATH_TOOL_PREFIX):  s/FILE/MAGIC/g.  Also set file_magic_cmd
+	to '${MAGIC}' so that make can grok it.
+	* Makefile.am (libtool):
+	(clibtool): ditto.
+
+2000-02-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_find_dlhandle): New function.
+	(tryall_dlopen): Use it.
+	* libltdl/ltdl.h:  Prototype it.
+	* doc/libtool.texi: Document it.
+	* NEWS: updated.
+
+	* libltdl/ltdl.c (lt_dlinit): removed unused variable, `loader'.
+
+	* libltdl/ltdl.c (lt_remove_dlloader): typo, s/=/==/g.
+
+2000-02-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.h (lt_dlloader_data_t):  New type for loader
+	instance data.
+	(lt_user_dlloader): New lt_dlloader_data_t field.
+	(lt_module_open_t): Add lt_dlloader_data_t parameter.
+	(lt_module_close_t): Add lt_dlloader_data_t parameter.
+	(lt_find_sym_t): Add lt_dlloader_data_t parameter.
+	(lt_dlloader_exit_t): Add lt_dlloader_data_t parameter.
+	* libltdl/ltdl.c:  A sprinkling of /*ARGSUSED*/ markers to
+	reassure lint that the unused arguments are intentional.
+	(lt_dlloader_t): New lt_dlloader_data_t field.
+	(lt_dlloader_data): New function to return the contents of the
+	dlloader_data field.
+	(sys_dl_open): Take an additional lt_dlloader_data_t argument.
+	(sys_dl_close): Ditto.
+	(sys_dl_sym): Ditto.
+	(sys_dl): Initialise lt_dlloader_data_t field.
+	(sys_shl_open, sys_shl_close, sys_shl_sym, sys_shl): As above.
+	(sys_wll_open, sys_wll_close, sys_wll_sym, sys_wll): As above.
+	(sys_bedl_open, sys_bedl_close, sys_bedl_sym, sys_bedl): As
+	above.
+	(sys_dld_open, sys_dld_close, sys_dld_sym, sys_dld): As above.
+	(presym_init, presym_exit, presym_open, presym_close, presym_sym,
+	presym): As above.
+	(lt_dlinit): Call presym_init with additional argument.
+	(lt_dlexit): Call dlloader_exit method with additional argument.
+	(tryall_dlopen): Call module_open method with additional argument.
+	(lt_dlclose): Call module_close method with additional argument.
+	(lt_dlsym): Call find_sym method with additional argument.
+	(lt_add_dlloader): Initialise dlloader_data field.
+	(lt_remove_dlloader): Call dlloader_exit method with additional
+	argument.
+
+	* libltdl/ltdl.c (find_file): Prevent early release of memory
+	in filename/*pdir.
+	From Jon Leichter <jon@symas.com>
+
+	(sys_wll_init): Deleted.  No longer required.  And this time,
+	with feeling!
+	(sys_wll_exit): Ditto.
+
+2000-02-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: updated.
+	* doc/libtool.texi (Libltdl interface): Moved user defined module
+	loader documentation from here...
+	(Module loaders for libltdl) ...to here, and updated the text and
+	added examples.
+	* ltdl.m4 (AC_CHECK_FUNCS): check strcmp for lt_find_dlloader.
+	* libltdl/ltdl.h: Reformatted and commented for readability.
+	(struct lt_user_dlloader): New data type for passing
+	initialisation pointers to lt_add_dlloader.
+	(LTDL_ERROR_INVALID_LOADER):  New error message when non loader
+	handles are passed to the user loader API.
+	(LTDL_ERROR_INIT_LOADER): New error when loader initialisation
+	fails.
+	(LTDL_ERROR_REMOVE_LOADER): New error when loader removal fails.
+	(lt_module_open_t): renamed from lt_lib_open_t.
+	(lt_module_close_t): renamed from lt_lib_close_t.
+	(lt_dlloader_exit_t): renamed from lt_dlloader_exit_t.
+	* libltdl/ltdl.c: Reordered builtin loaders so that the "dld"
+	loader no longer occurs before "dlopen" on some platforms and
+	after it on others.
+	(lt_dlloader_t): Moved here from ltdl.h, added a field,
+	"loader_name", for identifying the loader, and renamed from
+	lt_dltype_t.  Renamed type variables to loader IFF of type
+	lt_dlloader_t.
+	(lt_module_t): Renamed from lt_syshandle. Renamed handle variables
+	to module IFF of type lt_module_t.
+	(LTDL_TYPE_TOP): Deleted.  No longer required.
+	(sys_dl): Initialised as a struct lt_user_dlloader.
+	(sys_dl_init): Deleted.  No longer required.
+	(sys_dl_exit): Ditto.
+	(sys_shl): Initialised as a struct lt_user_dlloader.
+	(sys_shl_init): Deleted.  No longer required.
+	(sys_shl_exit): Ditto.
+	(sys_wll): Initialised as a struct lt_user_dlloader.
+	(sys_wll_init): Deleted.  No longer required.
+	(sys_wll_exit): Ditto.
+	(sys_bedl): Initialised as a struct lt_user_dlloader.
+	(sys_bedl_init): Deleted.  No longer required.
+	(sys_bedl_exit): Ditto.
+	(sys_dld): Initialised as a struct lt_user_dlloader.
+	(sys_dld_init): Deleted.  No longer required.
+	(sys_dld_exit): Ditto.
+	(sys_presym): Initialised as a struct lt_user_dlloader.
+	(lt_mod_init_t): Moved to here from ltdl.h.
+	(lt_dlinit): Add builtin loaders using the user loader API.
+	(lt_dlexit): Unregister and free all loaders.
+	(lt_add_dlloader): New function to add a new module loader after the
+	loader specified in the argument.
+	(lt_remove_dlloader): New function to remove a module loader.
+	(lt_next_dlloader): New function for iterating over module loaders.
+	(lt_dlloader_name): Accessor function for name of dlloader.
+	(lt_find_dlloader): New function to get a reference to a registered
+	module loader.
+	(strcmp): static implementation incase the host has none.
+	(lt_dlgettypes, lt_dlsettypes): Removed.
+
+2000-02-02  Thomas Tanner  <tanner@ffii.org>
+
+	* libltdl/ltdl.c: replace NULL with 0, remove unused system
+	  and app_private pointers from lt_dlhandle_t
+	* libltdl/ltdl.c (presym_add_list): new preloaded symbols
+	  don't need to be added to the end
+
+	* libltdl/ltdl.c (lt_dlgetdata, lt_dlsetdata): removed
+	* libltdl/ltdl.h: ditto
+	* doc/libtool.texi (libltdl interface): ditto
+
+2000-02-01  Thomas Tanner  <tanner@ffii.org>
+
+	* ltmain.in: support -dlopen/dlpreopen for libraries
+	* NEWS: updated
+	* TODO: updated
+	* ltmain.in: rename dlopen to dlopen_support
+	* ltconfig.in: ditto
+	* doc/libtool.texi: ditto
+
+	* ltmain.in: check whether libraries are moved out of $libdir,
+	  replace .a and .lib with .$libext, .o and .obj with .$objext
+
+2000-01-31  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.h (lt_dlrealloc): removed declaration.
+	* libltdl/ltdl.c (lt_dlrealloc): removed definition.
+	(lt_dladderror): Instead of calling lt_dlrealloc, use lt_dlmalloc,
+	and lt_dlfree.
+
+2000-01-30  Ossama Othman  <ossama@debian.org>
+
+	* libtool.m4 (lt_cv_cc_needs_belf): Set the test language to C
+	prior to executing the test that checks if the C compiler needs
+	"-belf."
+	Reported by Chris Butler <chrisb@sandy.force9.co.uk>
+
+2000-01-28  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_DEPLIBS_CHECK_METHOD):  Use changequote to
+	protect `[' and `]' in deplibs_check_method.
+
+	* libltdl/ltdl.h (lt_dlrealloc): Added declaration.
+	* libltdl/ltdl.c (lt_dlrealloc): Added default definition.
+
+	* libltdl/ltdl.c (lt_dlseterror): Catch errorcodes below 0 as
+	invalid.
+	* libltdl/ltdl.h (LTDL_ERROR): Added missing '_' in K&R
+	definition.
+
+	* libltdl/ltdl.h (ltdl_error_table): Added missing error code, and
+	fixed typo in another code.
+	* doc/libtool.texi (Libltdl interface): Added missing @end
+	clause.
+
+2000-01-27  Thomas Tanner  <tanner@ffii.org>
+
+	* ltconfig.in: Oops, replace the remaining $objdir's
+
+	* ltmain.in: merge library linking code of programs and libraries,
+	  some cleanups
+
+2000-01-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Updated.
+	* doc/libtool.texi (Libltdl interface): Document new entry
+	points.
+	* libltdl/ltdl.c (lt_dladderror): New function to add a user
+	defined error message to the tables used by lt_dlerror().
+	(lt_dlseterror):  New function to allow setting of last_error by
+	user modules.
+	(ltdl_error_strings): New preprocessor generated table of internal
+	error diagnostic strings.
+	(user_error_strings): New internal list of registered user error
+	diagnostic strings.
+	(throughout!): Use error messages from ltdl_error_strings.
+	* libltdl/ltdl.h (ltdl_error_table): New macro to tabulate
+	internal diagnostic error strings alongside enum keys.
+
+	* NEWS: Updated.
+	* doc/libtool.texi (Libltdl interface): Document new entry
+	points.
+	* libltdl/ltdl.c (lt_dltype_t):  Use new type definitions for
+	existing fields.
+	(lt_dladdtype): New function to add a new ltdl dynamic loader
+	type to the end of the list of valid types..
+	(lt_dlgettypes): New function to return the complete list of ltdl
+	dynamic loader types.
+	(lt_dlsettypes): New function to replace the list of ltdl dynamic
+	loader types entirely -- e.g. to prepend a new type to the
+	existing list.
+	(sys_dl_open, sys_dl_close, sys_dl_sym): Work with lt_syshandle.
+	(sys_shl_open, sys_shl_close, sys_shl_sym): ditto.
+	(sys_dld_open, sys_dld_close, sys_dld_sym): ditto.
+	(sys_wll_open, sys_wll_close, sys_wll_sym): ditto.
+	(sys_bedl_open, sys_bedl_close, sys_bedl_sym): ditto.
+	(presym_open, presym_close, presym_sym): ditto.
+	(tryall_dlopen): Call lt_lib_open_t functions lt_syshandle
+	compatibly.
+	(lt_dlclose): Call lt_lib_close_t functions lt_syshandle
+	compatibly.
+	(lt_dlsym): Call lt_find_sym_t functions lt_syshandle compatibly.
+	(lt_dltype_t): moved type declaration from here...
+	* libltdl/ltdl.h (lt_dltype_t): ...to here.
+	(lt_syshandle): new type for low level system handles passed by
+	loader functions
+	(lt_mod_init_t):  New type for functions implementing the
+	initialisation for an ltdl dynamic loader.
+	(lt_mod_exit_t): Type of exit functions for the same.
+	(lt_lib_open_t): Type of loader functions for the same.
+	(lt_lib_close_t): Type of unloader functions for the same.
+	(lt_find_sym_t): Type of symbol resolver functions for the same.
+
+	* libltdl/ltdl.c (sys_dl_init, sys_dl_exit, sys_dl_open,
+	sys_dl_close, sys_dl_sym):  Preprocess these away on cygwin to
+	avoid spurious error messages.
+
+2000-01-24  Thomas Tanner  <tanner@ffii.org>
+
+	fix severe bugs reported by Elrond <Elrond@Wunder-Nett.org>
+
+	* ltconfig.in: replace $objdir with $output_objdir
+
+	* ltmain.in: change to the builddir before relinking programs
+
+	* ltmain.in, ltconfig.in, libtool.m4, ltdl.m4:
+	  remove unnessary spaces from line endings
+
+2000-01-19  Thomas Tanner  <tanner@ffii.org>
+
+	* ltmain.in: rewrite of the ILD code, merge linking code for
+	  programs, libraries and objects, allow linking of shared libraries
+	  against static libraries/objects on platforms that support it
+	  but print a warning, fix some typos
+
+	* partially revert my previous change and
+	  update only copyright notices of files that were actually modified
+
+	* NEWS: update
+
+	* libltdl/Makefile.am: version number was wrong
+
+	* libltdl/ltdl.c (tryall_dlopen): revert Gary's change
+	  since it breaks dlpreopening
+	* ltdl.m4: ditto
+
+	* libltdl/ltdl.c (sys_search_path): search in the system default
+	  library search path, too
+	* ltdl.m4 (AC_LTDL_SYSSEARCHPATH): extract the path
+
+	* libltdl/ltdl.c (find_module): remove bogus file_not_found_error
+
+	* libltdl/ltdl.c (load_deplibs): implement loading of dependency
+	  libraries
+	* libltdl/ltdl.c (unload_deplibs): implement unloading of dependency
+	  libraries
+	* libltdl/ltdl.c (lt_dlexit): correctly close all modules and
+	  their dependencies
+
+	* libltdl/ltdl.c (lt_dlforeach): new function
+	* libltdl/ltdl.h: ditto
+	* doc/libtool.texi (using libltdl): document it
+
+	* libtool.m4: reformatting, only add -I$topsrc_dir/libltdl to
+	  INCLTDL
+
+	* libtoolize.in: reformatting
+	* ltconfig.in: reformatting
+	* ltmain.in: reformatting
+
+	* mdemo/configure.in: AC_SUBST INCLTDL
+	* mdemo/Makefile.am: use INCLTDL
+
+	* tests/Makefile.am: reexport OBJEXT and EXEEXT
+	* tests/dryrun.test: use them for building main.obj and mdemo.exe
+
+2000-01-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (tryall_dlopen): Abort with
+	file_not_found_error before trying all lib_open() methods
+	if the file to be dlopened doesn't exist.
+	* ltdl.m4 (AC_HAVE_HEADERS): add unistd.h.
+
+2000-01-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (find_file): memory error fixed.
+
+2000-01-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (Usage): Now it matches the code!
+	Reported by Jon Leichter <jon@symas.com>
+
+	* README:  Some notes about libtool release numbers.
+
+	* mdemo/README: Explain the deliberate incompleteness of the
+	Windows port.
+	* mdemo/configure.in: Use AC_LIBTOOL_WIN32_DLL.
+	* mdemo/Makefile.am (LDFLAGS):  Add -no-undefined.
+
+	* libltdl/ltdl.h (LTDL_STMT_START, LTDL_STMT_END):  Macros for
+	wrapping other macros to make a portable compound statement from
+	multiple C statements in the expansion.
+	(LTDL_SET_PRELOADED_SYMBOLS): Use the above macros to add an
+	extern declaration for lt_preloaded_symbols, to remove
+	dependency on undefined symbol from libltdl.dll on cygwin (and
+	other -no-undefined architectures).
+	* libltdl/ltdl.c (lt_preloaded_symbols): No longer defined here.
+
+	* libtool,m4 (AC_LIBTOOL_SETUP):  The result of lt_cv_need_dllmain
+	was set to the opposite of what it should be.
+	* configure.in (AC_LIBTOOL_WIN32_DLL):  Call to this macro is
+	required for libtool configury to test lt_cv_need_dllmain on
+	Windows.
+
+	* ltconfig.in (opt_cr, mingw*): replace unescaped ? with correctly
+	escaped and portable \{0,1\} in sed expression.
+	From Jon Leichter <jon@symas.com>
+
+2000-01-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_LIBLTDL_CONVENIENCE): Add -I${top_srcdir}/libltdl
+	to default INCLTDL for VPATH.
+	(AC_LIBLTDL_INSTALLABLE): ditto.
+	Reported by Tom Tromey <tromey@cygnus.com>
+
+2000-01-12  Thomas Tanner  <tanner@ffii.org>
+
+	* update all copyright notices to 2000
+
+	* doc/libtool.texi (using libltdl): document new lt_dlinfo struct,
+	  replace NULL with @code{NULL}, document lt_dlsetdata(),
+	  lt_dlgetdata() and lt_dlgetinfo()
+	* libltdl/Makefile.am: increment interface version number
+	* libltdl/configure.in: set version number to 1.1
+	* libltdl/ltdl.c: make some variables public by moving them
+	  to the info struct, add support for application specific data
+	  within module handles, new lt_dlsetdata(), lt_dlgetdata() and
+	  lt_dlgetinfo() functions,
+	  fix memory leaks, minor cleanups
+	* libltdl/ltdl.h: ditto
+	* mdemo/main.c: demonstrate use of lt_dlgetinfo,
+	  improved handling of errors
+
+	* ltconfig.in: set hardcode_into_libs = yes for GNU/Hurd, Linux
+	  and Solaris, only hardcode *all* run-paths if hardcode_into_libs
+	  is set to 'all', otherwise hardcode only user-specified rpaths
+	  into libraries
+	* ltmain.in: minor cleanups, we don't need to add user-specified
+	  rpaths to compile_rpath, finalize_rpath is sufficient
+
+	* ltconfig.in: transform linux* -> *linux-gnu* _after_ host_os has
+	  been set! (reported by Bruno Haible <haible@ilog.fr>)
+
+	* configure.in: AC_SUBST reload_flag, deplibs_check_method
+	  and file_magic_cmd
+
+	* README: use 'libtool --version' instead of 'ltconfig --version'
+	  (suggested by Francios Pinard <pinard@iro.umontreal.ca>
+
+2000-01-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.h (LTDL_DIRSEP_CHAR): Leave undefined when
+	not compiling for a Windows target.
+	* libltdl/ltdl.c (canonicalize_path): New function to
+	ensure internal paths use '/' directory separators.
+	(find_file): use canonicalize_path.  Memory management
+	changed to cope.
+	(lt_dlopen): ditto.
+	(free_vars): Removed `dir' and `name', which are now handled
+	internally.
+
+	* libltdl/ltdl.h (LTDL_DIRSEP_CHAR): Define to '/' or '\\',
+	as suitable for the target host.
+	(LTDL_PATHSEP_CHAR): Similarly with ':' or ';'.
+	* libltdl/ltdl.c: Use LTDL_DIRSEP_CHAR and LTDL_PATHSEP_CHAR
+	instead of hardcoding throughout.
+	Reported by Jon Leichter <jon@symas.com>
+
+Continued in ChangeLog.1999
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2001 b/ChangeLog.2001
new file mode 100644
index 0000000..25d1133
--- /dev/null
+++ b/ChangeLog.2001
@@ -0,0 +1,1575 @@
+2001-12-06  Jens Petersen  <petersen@redhat.com>
+
+	* ltmain.in: Replace all test "-a"s by "&& test"
+	for portability.
+
+2001-11-28  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Change the
+	factor of saftey as 3/4 of the result was not low enough.
+
+2001-11-28  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in: The test for whether AC_PROG_LIBTOOL is defined
+	in aclocal.m4 had bitrotted slightly.
+	Reported by Takahiko Kawasaki <Takahiko_Kawasaki@cii.csk.co.jp>
+
+2001-11-27  Donald D. Anderson  <dda@sleepycat.com>
+
+	* ltmain.in: Treat freebsd like openbsd, in that -lc/-lc_r should
+	not be explicitly used.  ld handles this depending on the presence
+	of the -pthread option.
+
+2001-11-27  Robert Boehne  <rboehne@ricardo-us.com>
+
+	With help from Michael Matz <matz@kde.org>:
+	* ltmain.in:  Add a new command line argument
+	--preserve-dup-deps for preserving duplicate
+	dependent libraries.
+	* libtool.texi: Document it.
+
+2001-11-27  Kevin Ryde  <user42@zip.com.au>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Send "test"
+	warnings to /dev/null, helps FreeBSD and maybe others.
+
+2001-11-15  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: quote LTCC because autoconf AC_PROG_CC_STDC
+	macro might add to $CC if options needed by compiler to
+	grok ANSI.
+
+2001-11-15  Gary V. Vaughan  <gary@gnu.org>
+
+	From Joseph S. Myers  <jsm28@cam.ac.uk>:
+	* ltmain.in: Typo.
+
+2001-11-15   Mo DeJong  <supermo@bayarea.net>
+
+	* ltmain.in: Place parens around a generated relink_command
+	so it is run is a subshell. This avoids an install error
+	where libtool ended up in the wrong directory after
+	relinking a .la file.
+
+2001-10-31  Raja R Harinath  <harinath@cs.umn.edu>
+
+	* configure.ac (pkgdatadir): Move the invocation of AC_INIT_AUTOMAKE
+	before the use of $PACKAGE in $pkgdatadir.
+	Reported by Bob Friesenhahn <bfreisen@simple.dallas.tx.us>
+
+2001-10-28  Gary V. Vaughan  <gary@gnu.org>
+
+	From Tom Bates  <Tom.Bates@compaq.com>:
+	* libtool.m4 [mips-compaq-nonstopux]: New port.
+	* ltmain.in [mips-compaq-nonstopux]: Support
+	$version_type == nonstopux.
+
+2001-10-28  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libltdl/ltdl.c (foreach_dirinpath): change some types to size_t
+	from int because strlen() returns size_t. argz_len changed to
+	size_t because argzize_path() takes 3rd argument as size_t, not
+	int.
+	Based on lint run from Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+
+2001-10-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (_LT_AC_TAGCONFIG): Cray sed does not allow character
+	sets to contain the separator character.
+	Reported by Kevin Ryde <user42@zip.com.au>
+
+	* ltdl.m4 (AC_WITH_LTDL): New macro to add `--with-included-ltdl'
+	option to configure, but to find an appropriate ltdl library and
+	append the right options to link it.
+
+2001-10-24  Kevin Ryde  <user42@zip.com.au>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS): Remove a stray ' quote.
+
+2001-10-24  H.J. Lu  <hjl@gnu.org>
+
+	* ltmain.sh: Allow link against an archive when building a
+	shared library.
+	* libtool.m4 (lt_cv_deplibs_check_method): Always use
+	file_magic for Linux ELF.
+
+2001-10-12  Guido Draheim  <guidod-2001q3@gmx.de>
+
+	* ltdl.m4: Changed "underscode to underscore".
+
+2001-10-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.ac: General modernisation and cleanup.
+	* cdemo/configure.ac: Ditto.
+	* demo/configure.ac: Ditto.
+	* depdemo/configrue.ac: Ditto.
+	* ltdl/configure.ac: Ditto.
+	* ltdldemo/configure.ac: Ditto.
+	* mdemo/configure.ac: Ditto.
+	* pdemo/configure.ac: Ditto.
+	* tagdemo/configure.ac: Ditto.
+
+2001-10-04  Albert Chin-A-Young <china@thewrittenword.com>
+
+	* libltdl/ltdl.c: Match function return type with prototype
+	(add static initializer to file_not_found).
+
+2001-09-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_LIBLTDL_CONVENIENCE): s/INCLTDL/LTDLINCL/ for
+	consistency with gettext's INTLINCL.  Keep the old symbol too for
+	backwards compatibility.
+	(AC_LIBLTDL_INSTALLABLE): Ditto.
+	* doc/libtool.texi (Distributing libltdl):  Adjust documentation.
+
+2001-09-22  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* ltdl.m4 (AC_LTDL_DLLIB): Even though HP-UX 10.20 and 11.00
+	support shl_load *and* dlopen, dlopen works correctly only
+	with a patch. Because we want to avoid the situation where we
+	build on a system with the patch but deploy on a system without,
+	use shl_load exclusively if found.
+
+2001-09-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (_LT_AC_FILE_LTDLL_C): Be carefule that the start
+	marker searched for by sed must start in column 0.
+	(_LT_AC_FILE_IMPGEN_C): Ditto.
+	Reported by Tor Lillqvist <tml@iki.fi>
+
+2001-09-22  Tor Lillqvist  <tml@iki.fi>
+
+	* libtool.m4 [mingw* cygwin*]: Small improvement for mingw-hosted
+	tool support (while still running libtool on cygwin). In that case
+	PATH_SEPARATOR is ':', but gcc -print-search-dirs still prints its
+	search path with ';' as separator.
+	(AC_LIBTOOL_RC, AC_LIBTOOL_LANG_RC_CONFIG): Add support for .rc
+	files (Windows resource files), compiled by the resource compiler
+	(windres in mingw) to .o files.
+	(AC_PROG_NM): Minor bug fix for $PATH elements with spaces in
+	them.
+	* configure.ac: Use LT_AC_PROG_RC.
+	* ltmain.in: Check for .rc files.
+	* NEWS: Updated.
+
+	* ltmain.in: Add a space to $base_compile in the case statement,
+	as the case labels checks for trailing spaces, but there aren't
+	necessarily in $base_compile.
+
+2001-09-22  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: When setting archive_cmds for CC, don't
+	test for $GXX but for $GCC on HP-UX. Indentation fixes.
+
+2001-09-21  Gary V. Vaughan  <gary@gnu.org>
+
+	From Tor Lillqvist <tml@iki.fi>:
+	* ltmain.in [cygwin* mingw*]: Take care of the difference between
+	wrapper script name and executable name.
+
+	* libtool.m4 (archive_cmds) [darwin1.[0-2]]: Darwin uses zsh-3.1.6
+	for /bin/sh, and that shell does not handle escaped quotes
+	properly yet.
+	Reported by Christopher Pfisterer <cp@chrisp.de>
+
+2001-09-21  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libltdl/ltdl.c: Match function return type with prototype
+	(add static initializer to some functions) to prevent warnings
+	from HP-UX cc.
+
+2001-09-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c: Added support for dmalloc, and uncovered some
+	memory bugs as a result.
+
+2001-09-21  Albert Chin  <china@thewrittenword.com>
+
+	* libtool.m4: Don't include main() when testing for command to
+	parse $NM output because some C++ compilers don't allow you to
+	take the address of main (e.g. HP-UX aCC).
+
+	* libtool.m4: Some uses of $GXX were unquoted, but GXX is either
+	NULL or yes.  Use "$GXX".
+
+2001-09-13  Assar Westerlund  <assar@sics.se>
+
+	* ltdl.m4 (AC_LTDL_DLLIB): call dlopen with arguments so the test
+	does not fail due to a prototype in dlfcn.h
+
+2001-09-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltdl.m4 (AC_CHECK_HEADERS): Check for assert.h.
+	* libltdl/ltdl.c:  If not, disable assertions manually.
+
+2001-09-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Be robust to having no files that need removing.
+
+	* libltdl/configure.ac (AM_INIT_AUTOMAKE): Bump libltdl version to
+	1.2.
+	* libltdl/Makefile.am (libltdl_la_LDFLAGS):  Bump libtool library
+	version info to 4:0:1.
+
+2001-09-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4: No need to undefine([symbols]), proper quotation is
+	enough.
+
+2001-09-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4: CVS Autoconf guarantees a decent default IFS, so
+	there is no need for us to preset it anymore.
+	Be careful not to set IFS="${IFS}$PATH_SEPARATOR" for PATH
+	splitting, otherwise spaces in directory names will be lost.
+	Use $PATH_SEPARATOR... don't rely on $ac_path_separator, which was
+	an autoconf internal until just now, when it disappeared!
+	* ltmain.in: Default IFS once, at the start.
+	Reported by Akim Demaille <akim@epita.fr>
+
+2001-09-10   Brad  <brad@comstyle.com>
+
+	* libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Missed an instance of
+	Autoconf square bracket quoting style normalisation.
+
+	* ltmain.in (-lc_r): Style improvement.
+
+	* doc/libtool.texi: Remove obsolete references to ltconfig.
+	* tests/quote.test: s/ltconfig/\$0/
+
+2001-09-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4: Use Autoconf square bracket quoting style
+	consistently throughout.
+
+2001-09-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Cleanup `autom4te' and `libtool' so that we don't
+	get caught by something from a previous build.
+
+	* libtool.m4 (archive_cmds, archive_expsym_cmds) [solaris*]: Revert
+	my 2001-09-06 patch.
+	(no_undefined_flag)i [solaris*]: Revert Alexandre's 2001-04-11 patch.
+
+2001-09-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (foreach_dirinpath): argz_len should be a size_t.
+	Reported by Albert Chin <china@thewrittenword.com>
+
+2001-09-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [solaris*]: Typo. s/GXX/GCC/.
+
+	* libtool.m4 (archive_cmds, archive_expsym_cmds) [solaris*]: Changing
+	no_undefined_flag from `-z text' to `-z defs' (see entry below at
+	2001-04-11  Alexandre Oliva  <aoliva@redhat.com>) has a problem.
+	when linking a shared library with gcc calling /usr/ccs/bin/ld (eg.
+	the gcc supplied with Solaris 8 companion CD), using the flag
+	-no-undefined, shared library linking will always fail because of
+	the unresolved symbols from libgcc.a.  Consequently we have to
+	provide a path to libgcc.a when linking shared libraries in
+	conjunction with -no-undefined!
+
+	From Michael Pruett <mpruett@engr.sgi.com>:
+	* libltdl/ltdl.c (find_module): `0' valued arguments to
+	tryall_dlopen_module() must be explicitly cast to avoid compiler
+	warnings on some environments.
+
+	From Daniel Johnson <danielj7@mac.com>:
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [darwin*]: Move from GNU
+	ld section to non-GNU ld section.
+
+2001-09-05  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* pdemo/Makefile.am (helldl):  Automake 1.4 can't find the target
+	if we use helldl$(EXEEXT), and Automake 1.5 barfs unless we do.
+	Using both targets to the left of the colon seems to work though!
+
+2001-09-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* demo/Makefile.am (helldl):  Automake 1.4 can't find the target
+	if we use helldl$(EXEEXT), and Automake 1.5 barfs unless we do.
+	Using both targets to the left of the colon seems to work though!
+
+2001-09-03  Brad  <brad@comstyle.com>
+
+	* ltdl.m4 [AC_LTDL_SYS_DLOPEN_DEPLIBS]: Teach ltdl about the
+	behavior of OpenBSD's dlopen().
+
+2001-09-03  Gary V. Vaughan  <gary@gnu.org>
+
+	From Marius Vollmer <mvo@zagadka.ping.de>:
+	* libltdl/ltdl.c (tryall_dlopen_module): Don't forget to propogate
+	errors over recurse levels.
+
+2001-09-03  Brad  <brad@comstyle.com>
+
+	* libtool.m4 [openbsd*]: More improvements to the OpenBSD port.
+
+2001-09-02  Gary V. Vaughan  <gary@gnu.org>
+
+	From Albert Chin <china@thewrittenword.com>:
+	* libtool.m4 (_LT_AC_LANG_C_CONFIG) [aix4*]: Be careful with
+	shared namespaces for static and shared libs.
+	(AC_LIBTOOL_DLOPEN_SELF): If all else fails, try dld_link from GNU
+	DLD.
+
+2001-09-02  Christopher Pfisterer <cp@chrisp.de>
+
+	* libtool.m4, ltmain.in: Linker flag and version numbering fixes
+	for darwin.
+
+2001-09-02  Gary V. Vaughan  <gary@gnu.org>
+
+	Based on a patch from Marius Vollmer <mvo@zagadka.ping.de>:
+	* NEWS: updated.
+	* ltdl.m4 (AC_LIB_LTDL): Check for unistd.h.
+	* ltdl.c: Include unistd.h if it exists.
+	(LTDL_SEARCHPATH_VAR): Macro to prevent hardcoding
+	"LTDL_LIBRARY_PATH".
+	(LTDL_ARCHIVE_EXT): Macro to prevent hardcoding ".la".
+	(archive_ext): Have only one copy of ".la" in the readonly
+	segment of the compiled library.
+	(find_handle_callback): Don't bother trying to dlopen the file if
+	it doesn't exist.
+	(find_handle): Don't bother searching for files if no search_path
+	was supplied.
+	(file_not_found): A new function to determine whether the last
+	error was due to a file not found condition.
+	(try_dlopen): Renamed from lt_dlopen() and changed to have the
+	same footprint as tryall_dlopen.  This involved a minor rewrite of
+	much of the internals of this function.
+	(lt_dlopen): A new function wrapped arounf try_dlopen().
+	(lt_dlopenext): If a file already has a suitable extension, don't
+	bother adding additional extensions and trying to open those.
+	Tidy up the rest of the code to prevent continued searching with
+	an eventual FILE_NOT_FOUND when a genuine failure earlier in the
+	search process could be legitimately reported.
+
+	* demo/Makefile.am (helldl$(EXEEXT)): Automake-1.5 made me change
+	this from just `helldl'.
+
+2001-07-31  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) Fixed a problem
+	with export_symbols_cmds not being set for CXX tags, and
+	not being properly set for any tag under AIX/Power.
+
+2001-08-19  Ossama Othman  <ossama@uci.edu>
+
+	* libtool.m4 (AC_LIBTOOL_LANG_CXX_CONFIG): Corrected and improved
+	  error message that is displayed when there was a problem
+	  compiling the C++ test program.  It still mentioned the now
+	  non-existent `ltcf-cxx.sh' file.
+
+	* doc/libtool.texi (LTDL_SET_PRELOADED_SYMBOLS): Removed
+	  parentheses at end of starting "defmac" line, as pointed out by
+	  makeinfo.
+
+2001-08-18  Brad  <brad@comstyle.com>
+
+	* ltmain.in: Do not remove -lm from deplibs for OpenBSD.
+
+2001-08-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (argz_create_sep): Don't forget to include the
+	terminating '\0' when counting argz_len.
+	(argz_create_sep): When canonicalizing argz, don't forget to copy
+	the terminating '\0', incase canonicalization has shortened argz.
+	(argz_stringify): Don't covert the final '\0' to a separator.
+
+2001-08-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_dlhandle_next): Now we can loop through all
+	loaded module handles as originally intended.
+
+	* libltdl/ltdl.c (lt_dlseterror): Oops.  This never worked
+	either, due to a pair of typos.  Now fixed.
+
+	* libltdl/ltdl.c (N_ELEMENTS):  Deleted.  How come nobody noticed
+	there was no way this could have ever worked?
+	(lt_dlcaller_set_data): Now that valid caller_ids must be
+	non-zero, allocate an addition entry in the caller_data vector and
+	use a zero valued key as the end marker.
+	(lt_dlcaller_get_data): Iterate up to the end marker in one pass.
+
+2001-08-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_dlcaller_register): Caller ids are allocated
+	starting from value `1', so that clients can use a value of zero
+	to indicate that libltdl has not yet initialised.
+
+	* ltmain.in (exec_cmd): Fix quoting in execute mode so that the
+	double quotes added by libtool (to prevent lossage with embedded
+	spaces in filenames etc.) are not interpreted as literals by the
+	shell.
+
+2001-08-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (find_file_callback): Fix a multiple free()
+	bug.
+	(tryall_dlopen_module): Remove some unused variables.
+
+	* libltdl/ltdl.c (lt_dlinsertsearchdir): Calculate the address
+	of the end of user_search_path correctly.
+
+	* libltdl/ltdl.c (rpl_argz_stringify): New fallback implementation.
+	* ltdl.m4 (AC_LTDL_FUNC_ARGZ):  Test for argz_stringify in libc.
+	* libltdl/ltdl.c (lt_argz_insertinorder): Renamed from
+	lt_argz_insert to make room for...
+	(lt_argz_insert): Wraps argz_insert with libltdl error handling.
+	(lt_dlpath_insertdir): Insert new path elements into an
+	argzized path.
+	(lt_dlinsertsearchdir): New function to insert new search
+	directories anywhere into user_search_path using the above.
+	(lt_dladdsearchdir): Rewritten to use lt_dlpath_insertdir.
+	* libltdl/ltdl.h (lt_dlinsertsearchdir): Prototype for export.
+	* doc/libtool.texi (Libltdl interface): Document it.
+	* NEWS: Updated,
+
+2001-08-07  Gary V. Vaughan  <gary@gnu.org>
+
+	From Albert Chin <china@thewrittenword.com>:
+	* ltmain.in [irix*]: $with_gcc is either "yes" or "" (empty string)
+	with current autoconf, so we need to be robust to that when testing
+	it,
+
+2001-08-06  Gary V. Vaughan  <gary@gnu.org>
+
+	From Brad <brad@comstyle.com>:
+	* libtool.m4 (deplibs_check_method) [aix*]: Removed redundant setting
+	of this variable.
+
+2001-08-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (load_deplibs): Insert missing 1st argument to
+	LT_EMALLOC.
+
+2001-08-05  Tim Van Holder  <tim.van.holder@pandora.be>
+
+	* ltdl.m4: Canonicalize descriptive text used with
+	AC_DEFINE.
+
+	* libtool.m4 (_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR): Remove.
+	(_LT_AC_PROG_ECHO_BACKSLASH): Use $ac_path_separator
+	instead of $PATH_SEPARATOR.
+	(AC_LIBTOOL_SYS_DYNAMIC_LINKER): Ditto.
+	(_LT_AC_TAGCONFIG): Ditto.
+	(AC_ENABLE_SHARED): Ditto.
+	(AC_ENABLE_STATIC): Ditto.
+	(AC_ENABLE_FAST_INSTALL): Ditto.
+	(AC_PATH_TOOL_PREFIX): Ditto.
+	(AC_PATH_MAGIC): Ditto.
+	(AC_PROG_LD): Ditto.
+	(AC_PROG_NM): Ditto.
+	* ltdl.m4 (AC_LTDL_SYSSEARCHPATH): Ditto.
+
+2001-08-05  Gary V. Vaughan  <gary@gnu.org>
+
+	From Brad <brad@comstyle.com>:
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [openbsd]:  OpenBSD
+	can build modules without a `lib' prefix and version number.
+	Move the deplibs check code from here...
+	(AC_DEPLIBS_CHECK_METHOD): ...to here.
+
+2001-08-05  Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu>
+
+	* libtool.m4 [osf3*, osf4*, osf5*]: Tru64 *can* build modules
+	without a `lib' prefix to the module name.
+
+2001-08-05  Gary V. Vuaghan  <gary@gnu.org>
+
+	From Guido Draheim <Guido.Draheim@tek.com>:
+	* ltmain.in: Display better and different error messages when
+	library linkage fails in various ways.
+
+2001-08-05  Albert Chin-A-Young <china@thewrittenword.com>
+
+	* libtool.m4 (_LT_AC_SYS_LIBPATH_AIX): Add newline after
+	terminating '}' grouping character. Change '[0-9][0-9]'
+	to '0' as we've already matched it.
+
+2001-08-05  Gary V. Vaughan  <gary@gnu.org>
+
+	From Brad <brad@comstyle.com>:
+	* libtool.m4 (archive_cmds) [darwin, newsos, sysv4]: Replace
+	1.3 era $linkopts references with $linker_flags.
+
+	* libltdl/ltdl.c:  Fixed several careless mistakes in the
+	foreach_dirinpath support functions.
+	(foreach_dirinpath): Walk path elements with the argz API.
+
+2001-08-04  Gary V. Vaughan  <gary@gnu.org>
+
+	From Sedi Master Albert Chin <china@thewrittenword.com>:
+	* libtool.m4 (_LT_AC_SYS_LIBPATH_AIX): Replace the awk invocation
+	with an equivalent bit of sed wizardry.
+
+	From Edouard G. Parmelan <egp@free.fr>
+	* libtool.m4 [darwin, openbsd]: Fix quoting problems with
+	unquoted [] expressions.
+
+2001-08-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap:  s/ltdldemo // -- This demo soesn't work properly,
+	so I haven't committed it yet.
+
+2001-08-01  Ossama Othman  <ossama@doc.ece.uci.edu>
+
+	* libtool.m4 (AC_LIBTOOL_SETUP): Require Autoconf-2.50 via the
+	AC_PREREQ autoconf macro since the new libtool macros utilize
+	macros from that version of Autoconf.
+
+2001-08-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltdl.m4: Bump serial number.
+	General reformat and tify up in line with Autoconf-2.50 support.
+	(AC_LTDL_FUNC_ARGZ): Test for system implementations of a
+	handful of argz API calls, the error_t type, and the argz.h
+	header.
+	* libltdl/configure.ac (AM_INIT_AUTOMAKE): Bump version number.
+	* libltdl/ltdl.c (rpl_argz_append, rpl_argz_create_sep.
+	rpl_argz_insert, rpl_rgz_next):  Fallback implementations of
+	the similarly named functions for machines that don;t use glibc.
+	(lt_dlrealloc):  New memory function pointer that can be set by
+	the client.  Defaults to rpl_realloc, which in turn uses only
+	lt_dlmalloc and lt_dlfree.
+	(LT_EMALLOC, LT_EREALLOC): Set internal out-of-memory error
+	inside the functions called by these new macros.  Simplified all
+	callers by removing explicit client error reporting.
+	(memmove):  Fallback implementation of overlap safe memory copy
+	function.
+	(tryall_dlopen):  Factorized common code into...
+	(tryall_dlopen_module): ...this new helper function.
+	(canonicalize_path):  Changed function signature to return success
+	or failure.  Updated all callers.
+	(foreachfile_callback):  Make use of argz API.
+	(LT_DLSTRLEN): Moved from here...
+	* libltdl/ltdl.h (LT_STRLEN): ...to here.  Updated all callers.
+	(lt_dlrealloc):  Declare new memory management handle.
+
+2001-07-31  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* libtool.m4 (mingw*) Revert the previous change as it was
+	applied by mistake.
+
+2001-07-31  Guido Draheim  <Guido.Draheim@tek.com>
+
+	* libtool.m4 (mingw*) sys_lib_search_path_spec:
+	Sets the proper path separator for cross-compiling.
+
+2001-07-30  Steve Ellcey  <sje@cup.hp.com>
+
+	* libtool.m4 (ia64-*-hpux*) Add support for ia64*-*-hpux* platform.
+
+2001-07-30  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_COMPILER_PIC) [aix*]: Fixed an
+	incorrect resetting of lt_prog_compiler_static when using gcc
+	under AIX Power.
+
+2001-07-31  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Remove generated files (incase they are links) before
+	rerunning the autotools to regenerate them.
+
+2001-07-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_SETUP): Use Autoconf-2.50 era
+	quadrigraphs and AC_HELP_STRING to bring AC_ARG_WITH/ENABLE
+	macros up to date.
+	(_LT_AC_LOCK): Ditto.
+	(_LT_AC_TAGCONFIG): Ditto.
+	(AC_PROG_LD): Ditto.
+	(AC_ENABLE_SHARED): Ditto.  And eliminate the last remaining
+	changequote invocations.
+	(AC_ENABLE_STATIC): Ditto.  And Ditto.
+	(AC_ENABLE_FAST_INSTALL):  Ditto.  And Ditto.
+	* ltdl.m4 (AC_LTDL_ENABLE_INSTALL): Use Autoconf-2.50 era
+	quadrigraphs and AC_HELP_STRING to bring AC_ARG_ENABLE
+	macro up to date.
+	* NEWS: Updated.
+
+	* libtool.m4 [UnixWare7, OpenUNIX8]: Initial support for
+	UnixWare7 and OpenUNIX8.  Accept these identifiers from the
+	latest config.guess/config.sub as pseudonyms for sysv5uw[78].
+	* NEWS: Updated.
+	Reported by Boyd Lynn Gerber <gerberb@zenez.com>
+
+2001-07-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/sh.test: Add a new test to enforce X as the fill
+	character in `test "X...'.
+	Beef up the `test' tests to also check `test -.' and `test ! -.'
+	phrases for compliance.
+	* ltmain.in: Fix quoting problems uncovered by the new tests.
+
+2001-07-29  Andrew C. Feren  <aferen@CetaceanNetworks.com>
+
+	* tests/sh.test:  New test to disallow `test $foo', where
+	`test "$foo"' is much safer.
+	* ltmain.in: Fix quoting problems uncovered by the new test.
+
+2001-07-29  Steve Ellcey  <sje@cup.hp.com>
+
+	* libtool.m4 (lt_cv_sys_global_symbol_to_cdecl):  Change it from
+	"extern char" to "extern int" so that GCC 3.0 won't complain and
+	refuse to compile programs containing "extern char main()".
+
+2001-07-29  Gary V. Vaughan  <gary@gnu.org>
+
+	From Guido Draheim <Guido.Draheim@tek.com>:
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [mingw]: Support
+	cross compilation to mingw by allowing `:' or ';' as a path
+	separator.
+	* NEWS: Updated.
+
+2001-07-27  NIIBE Yutaka  <gniibe@m17n.org>
+
+	* libtool.m4 (lt_cv_deplibs_check_method): Use pass_all
+	for sh*-*-linux* (SuperH) too.
+
+2001-07-25  Ossama Othman  <ossama@debian.org>
+
+	From Thomas Poindessous <poinde_t@epita.fr>
+	* ltmain.in (pic_mode):  Added missing quotes around shell
+	variable in "if test" conditional.
+
+	From Peter Moulder <pmoulder@longford.csse.monash.edu.au>
+	* ltmain.in (xform): Add support for pre-processed
+	(e.g. `*.{i,ii}' sources).
+
+2001-07-25  Gary V. Vaughan  <gary@gnu.org>
+
+	From Steve Ellcey <sje@cup.hp.com>:
+	* libltdl/ltdl.c (foreach_dirinpath): Free unassigned pointer
+	fix for `canonical'.
+
+2001-07-23  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* libtool.m4 (AC_LIBTOOL_LANG_CXX_CONFIG, AC_LIBTOOL_PROG_LD_SHLIBS)
+	[aix4*, aix5*]: Fixed a mispelled binder option under AIX.
+	The option to throw errors for unresolved external references is
+	-bernotok, not -bnoerok.
+
+2001-07-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (EXTRA_DIST): Don't forget to distribute
+	ChangeLog.1.
+
+	From Erik Lindahl <E.Lindahl@chem.rug.nl>
+	* libtool.m4 (_LT_AC_SYS_LIBPATH_AIX): Used on aix to discover
+	the compiler's default library search path so that the MPI
+	compiler suite is not hosed by the previously hardcoded path.
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [aix4*, aix5*]: Use it.
+
+2001-07-23  Andreas Schwab  <schwab@suse.de>
+
+	* libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Use pass_all for
+	s390*-*-linux* and m68*-*-linux*.
+
+2001-07-19  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS): Fix tag support
+	problems with CXX variables being overwritten by the individual
+	macros.
+	(AC_LIBTOOL_PROG_CC_C_O): Ditto.
+	(AC_LIBTOOL_PROG_COMPILER_PIC): Ditto.
+	(AC_LIBTOOL_LANG_CXX_CONFIG): Moved call to
+	AC_LIBTOOL_SYS_HARD_LINK_LOCKS after the call to
+	AC_LIBTOOL_PROG_CC_C_O as it depends on the result.
+	(AC_LIBTOOL_LANG_GCJ_CONFIG): Ditto.
+	(AC_LIBTOOL_LANG_C_CONFIG): Ditto.
+	(AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH): Used the macro
+	_LT_AC_TAGVAR to ensure the correct variable is being queried.
+	(AC_LIBTOOL_SYS_DYNAMIC_LINKER): Changed the naming of shared
+	objects under IRIX back to what it was in the MLB.
+
+2001-07-23  Mark Kettenis  <kettenis@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN) [gnu*]: Remove spurious
+	"break" and bogus comment
+	(_LT_AC_LANG_CXX_CONFIG): Add support for the Hurd.
+	* ltdl.m4 (AC_LTDL_SYS_DLOPEN_DEPLIBS): Add support for the Hurd.
+
+2001-07-16  Robert Boehne  <rboehne@ricardo-us.com>, Tim Mooney  <mooney@dogbert.cc.ndsu.NoDak.edu>
+
+	* ltdl.m4 (AC_LTDL_SYS_DLOPEN_DEPLIBS): add cases and comments for
+	more platforms, including AIX, Digital/Tru64 UNIX and IRIX.
+
+2001-07-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS): Fix ia64 AIX
+	run-time-linking when not using gcc.
+	(AC_LIBTOOL_LANG_CXX_CONFIG):  Ditto.
+	Reported by Dan McNichol <mcnichol@austin.ibm.com>
+
+2001-07-12  Gary V. Vaughan  <gary@gnu.org>
+
+	From dda@sleepycat.com (Don Anderson):
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [qnx]: New
+	supported architecture.
+	(AC_DEPLIBS_CHECK_METHOD) [qnx]:  Ditto.
+	* NEWS: Updated.
+
+	From Stefan Ondrejicka <ondrej@idata.sk>:
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [cygwin*]: Make
+	sure that /lib/w32api is searched for system libraries to
+	match recent versions of cygwin.
+	* NEWS: Updated.
+
+2001-07-12  Dan McNichol  <mcnichol@austin.ibm.com>
+
+	From albert chin <china@thewrittenword.com>
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS): Fix AIX
+	run-time-linking when using gcc.
+	(AC_LIBTOOL_LANG_CXX_CONFIG):  Ditto.
+
+2001-07-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (_LT_AC_LANG_CXX_CONFIG) [hpux, linux, osf,
+	solaris]: Doh!  the evalled variable shouldn't have been
+	quoted.
+
+	* libtool.m4 (_LT_AC_LANG_CXX_CONFIG) [hpux, linux, osf,
+	solaris]: output_verbose_link_cmd have unquoted `*' in case
+	statements for these architectures.  Be sure to quote them
+	with a sed expression before passing to eval.
+	Reported by Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu>
+
+2001-07-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* README-alpha:  s/configure.in/configure.ac.
+	* configure.ac: Bumped version to 1.4c.
+
+	GNU libtool 1.4b was released.
+
+	* configure.ac: Bumped version to 1.4b.
+	* NEWS: updated.
+	* config.guess, config.sub, texinfo.tex:  Synchronised from
+	ftp.gnu.org.
+
+2001-07-09  Robert Boehne  <rboehne@ricardo-us.com>
+
+	From Michael Elizabeth Chastain <chastain@cygnus.com>:
+	* libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN):  Set max_cmd_len
+	to a maximum of 512Kb, as it seems some HPUX 11.0 systems
+	have trouble with 1MB.
+
+2001-07-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* README-alpha:  Upgrade distribution instructions to include
+	canonical location of texinfo.tex.
+
+2001-07-09  Timothy Wall  <twall@oculustech.com>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS): Don't disable shlibs
+	on AIX5/IA64 with GNU ld.  Keep gnu defaults if using gnu tools
+	on AIX5/IA64.
+
+2001-07-09  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN):  Set max_cmd_len
+	to -1 on hurd, it has no command line argument limits.
+	* ltmain.in Handle max_cmd_len=-1 for systems that don't have
+	command line argument limits.
+
+2001-07-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (_LT_AC_LANG_C_CONFIG):  Revert to 1.3.x
+	sematics, and always build static libs when the host machine
+	cannot build shared libs.  Even if static libs were explicitly
+	disabled.
+
+2001-07-02  Gary V. Vaughan  <gary@gnu.org>
+
+	Cleanup of libltdl:
+	* ltdl.c (lt_dladderror): Don't use `index' as a variable name,
+	since it is a function on BSD based boxes.
+	(lt_dlseterror): Ditto.
+	(lt_dlexit): Remove unused errormsg declaration.
+	(foreach_dirinpath):  Make sure filename is initialised.
+	(find_handle):  Return NULL for a failed search.
+	(foreachfile_callback): Don't reuse data2 symbol from prototype
+	in func declaration to prevent symbol shadowing.
+	* ltdl.h (lt_dlmutex_seterror): Don't use `error' as a parameter
+	name, since it is a function on glibc boxes.
+
+	* libtoolize.in:  Display --version in the same format as
+	autoconf and automake.
+	* ltmain.in: Ditto.
+
+2001-06-30  Gary V. Vaughan  <gary@gnu.org>
+
+	Merge test improvements from multi-language-branch:
+	* tests/defs: Find and set the value of CC probed by libtool.m4
+	* tests/link-2.test: Use a .lo wrapper script, and the value of
+	CC set by defs instead of hardcoding gcc.
+	* tests/link.test: Use the value of CC set by defs instead of
+	hardcoding gcc.
+	* tests/quote.test: Ditto.
+	* tests/suffix.test: Ditto.
+
+	* libtool.m4 (AC_LIBTOOL_PROG_COMPILER_PIC) [aix*]: Always set
+	lt_prog_compiler_wl to `-Wl'.
+	Reported by Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* ltdl.m4 (AC_LTDL_DLLIB) [sco3.2*]: When searching for a dlopen
+	implementation, and adding `-ldl' has failed, try linking a call
+	to dlopen, #including dlfcn.h, and without -ldl.  On sco3.2 the
+	header files redefines the interface symbols to point at the
+	implementation symbols in libc.
+	Reported by "Golubev I. N." <gin@mo.msk.ru>
+
+2001-06-29  Tim Van Holder  <tim.van.holder@pandora.be>
+
+	General cleanup of autoconf-2.50 upgrade:
+	* configure.ac: Mark as needing autoconf-mode in
+	emacs.  Pass arguments to AC_INIT.
+	* cdemo/configure.ac: Ditto.
+	* demo/configure.ac: Ditto.
+	* depdemo/configure.ac: Ditto.
+	* libltdl/configure.ac: Ditto.
+	* mdemo/configure.ac: Ditto.
+	* pdemo/configure.ac: Ditto.
+	* tagdemo/configure.ac: Ditto.
+	* ltdl.m4: Mark as needing autoconf-mode in
+	emacs.
+	* libtool.m4: Mark as needing autoconf-mode in
+	emacs.  Don't add () to AS_MESSAGE_LOG_FD.
+	* libltdl/configure.ac: Use config-h.in as
+	template for config.h.
+	* tagdemo/configure.ac: Drop the AC_DIAGNOSTIC. Move
+	AC_LANG([C++]) after the OBJEXT/EXEEXT check.
+
+2001-06-29  Gary V. Vaughan  <gary@gnu.org>
+
+	From Tim Van Holder <tim.van.holder@pandora.be>
+	* tests/suffix.test: Typo in 2nd for loop.
+
+	From Tim Van Holder <tim.van.holder@pandora.be>
+	* libltdl/Makefile.am (OBJECTS):  This was an implicit variable.
+	instead state the list of object variables explicitly.
+
+	From Bruno Haible <haible@ilog.fr>
+	* libtool.m4:  undefine the m4 builtin `symbols', so that the
+	string `symbols' can be used in the rest of the code without
+	causing errors with autoconf-2.13.
+
+	From "Golubev I. N." <gin@mo.msk.ru>
+	* tests/Makefile.am (CPPLAGS): Typo. s/CPPLAGS/CPPFLAGS.
+
+	* mdemo/Makefile,am (foo1_la_LIBADD): Add libsub.la, since foo1
+	does use symbols from libsub.la -- only platforms that allow
+	undefined symbols in libraries were able to cope with this
+	previously.
+	Reported by Robert Collins <robert.collins@itdomain.com.au>
+
+	From "Golubev I. N." <gin@mo.msk.ru>
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [sco3.2v5*]: Needs
+	-wl,-Bexport to make self dlopen work.
+
+2001-06-28  Gary V. Vaughan  <gary@gnu.org>
+
+	From  Alexander Bluhm  <Alexander.Bluhm@WiredMinds.de>
+	* libltdl/ltdl.c (lt_dlopen): Fix bad memory initialisation
+	assumptions.
+
+	* libtool.m4 (AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE) [HPUX]: Define
+	lt_cv_sys_global_symbol_to_c_name_address to be a sed expression
+	for mangling the output of the symbol pipe into a brace delimited
+	C declaration of symbol name and address.
+	* ltmain.in: Use it to generate the fooS.c symbol name
+	Reported by Albert Chin-A-Young  <china@thewrittenword.com>
+
+2001-06-28  Tim Van Holder  <tim.van.holder@pandora.be>, Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Use cp instead of ln -s, for systems without
+	symlinks.  Reorder the statements to avoid repetition outside
+	the loop.
+
+2001-06-28  Paolo Bonzini  <bonzini@gnu.org>, Gary V. Vaughan  <gary@gnu.org>
+
+	Libtool now builds with the help of Autoconf-2.50!
+	* configure.ac (AC_PREREQ):  Require Autoconf-2.50 or newer.
+	(AC_PROG_CPP, AC_EXEEXT, AC_OBJEXT):  Removed.  Autoconf-2.50
+	doesn't have the AC_REQUIRE bug that required these to be called
+	explicitly from here.  Autoconf-2.50 uses this file instead of...
+	* configure.in: ...this, which is now deleted.
+	* cdemo/configure.ac, cdemo/configure.in: Ditto.
+	* demo/configure.ac, demo/configure.in: Ditto.
+	* depdemo/configure.ac, depdemo/configure.in: Ditto.
+	* libltdl/configure.ac, libltdl/configure.in: Ditto.
+	* mdemo/configure.ac, mdemo/configure.in: Ditto.
+	* pdemo/configure.ac, pdemo/configure.in: Ditto.
+	* tagdemo/configure.ac, tagdemo/configure.in: Ditto.
+	* libltdl/acconfig.h:  Deleted.
+	* Makefile.am (libtool): libtool now depends on configure.ac.
+	* libtool.m4 (_LT_AC_LOCK):  Use 2.50's AC_LANG_PUSH/AC_LANG_POP
+	instead of 2.13's AC_LANG_SAVE/AC_LANG_RESTORE.
+	(AC_LIBTOOL_LANG_C_CONFIG): Ditto.
+	(AC_LIBTOOL_LANG_CXX_CONFIG): Ditto.
+	* libtoolize.in:  Use $configure_ac, instead of hardcoding
+	configure.in.
+
+2001-06-28  Tim Van Holder  <tim.van.holder@pandora.be>
+
+	* pdemo/Makefile.am:  Use '=' instead of '+=' to shut up
+	automake.
+
+2001-06-27  Gary V. Vaughan  <gary@gnu.org>
+
+	From brad@openbsd.org:
+	* NEWS: Updated.
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [openbsd]: Improved
+	support for various openbsd platforms.
+	(AC_LIBTOOL_PROG_LD_SHLIBS): Ditto.
+	* ltmain.in: Ditto,
+
+2001-06-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Updated.
+	* libltdl/ltdl,c (LT_DLMUTEX_LOCK): Renamed from MUTEX_LOCK to
+	avoid potential namespace clash.
+	(LT_DLMUTEX_UNLOCK, LT_DLMUTEX_SETERROR, LT_DLMUTEX_GETERROR):
+	Ditto.
+	(lt_dlmutex_lock_func): Renamed from mutex_lock to avoid a
+	namespace clash of NCR MP-RAS.
+	(lt_dlmutex_unlock_func, lt_dlmutex_seterror_func,
+	lt_dlmutex_geterror_func): Ditto.
+	Reported by Edouard G. Parmelan <egp@free.fr>
+
+	* libltdl/ltdl.c (LT_DLSTRLEN): Call strlen only if the argument
+	is non-NULL and non-zero in length.  Changed all calls to strlen
+	appropriately.
+
+	* libltdl/ltdl.c: Prototype all static functions.
+
+	* ltdl.m4: Bump serial number to 3.
+	(AC_LIB_LTDL): Require AC_HEADER_DIRENT for ltdl.c.
+	* libltdl/ltdl.h (lt_dlforeachfile): Prototype for new function.
+	* libltdl/ltdl.c: Include an appropriate header for the
+	opendir/dirent api.
+	(foreach_dirinpath): Visit each file in a list of directories.
+	(find_file_callback): Factor out the core of find_file() to make
+	use of foreach_dirinpath().
+	(find_file): Use it!
+	(find_handle_callback, find_handle): Ditto.
+	(lt_dlforeachfile):  New function to find files in a searchpath.,,
+	(foreachfile_callback): ...using this callback.
+	* doc/libtool.texi (Libltdl interface): Document new
+	lt_dlforeachfile api call.
+
+2001-06-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* THANKS:  Added Albert Chin-A-Young.
+
+	* libtool.m4 (IFS): When IFS is changed to split a string for
+	examination in a loop, restore it inside the loop as well as
+	outside incase IFS is needed by commands in that loop.
+	Reported by Pavel Roskin <proski@gnu.org>
+
+2001-06-25  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: Prefer shl_load to dlopen on HP-UX because dlopen
+	won't work properly without a patch.
+
+2001-06-25  Daniel Harvey <daniel@amristar.com.au>
+
+	* libtool.m4 (ltdll_cmds): [$]0 doesn't appear to translate through
+	the script correctly, change to $''0
+
+2001-06-25  Maciej W. Rozycki  <macro@ds2.pg.gda.pl>
+
+	* libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Use pass_all for
+	mips-*-linux* and mipsel-*-linux*.
+
+2001-06-24  Andreas Schwab  <schwab@suse.de>
+
+	* libtool.m4 (AC_LIBTOOL_SETUP): Remove failed try to
+	transform linux to linux-gnu in $host.
+	(AC_LIBTOOL_SYS_DYNAMIC_LINKER): Match $host_os against
+	linux*, not linux-gnu*.
+	(AC_DEPLIBS_CHECK_METHOD): Likewise.
+
+2001-06-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR):  Set
+	PATH_SEPARATOR appropriately if it is not set already,
+	(_LT_AC_TAGCONFIG): Use it.
+	(AC_ENABLE_SHARED): Ditto.
+	(AC_ENABLE_STATIC): Ditto.
+	(AC_ENABLE_FAST_INSTALL): Ditto.
+	(AC_PATH_TOOL_PREFIX): Ditto.
+	(AC_PATH_MAGIC): Ditto.
+	(AC_PATH_PROG_NM): Ditto.
+
+	From Tim Van Holder  <tim.van.holder@pandora.be>:
+	* libtool.m4: Use the canonical absolute path test
+	([\\/]* | ?:[\\/]) and $PATH_SEPARATOR wherever
+	appropriate.
+	(AC_LIBTOOL_PROG_CC_PIC): Properly recognize DJGPP as a
+	platform that doesn't support shared libraries.
+	(AC_LIBTOOL_SYS_MAX_CMD_LEN): Avoid this test on DJGPP; use a
+	fixed value (12K) instead.
+	(AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE): Don't forget $ac_exeext
+	when testing for link success.
+
+	* configure.in (AM_INIT_AUTOMAKE): Bumped version to 1.4a.
+
+	Complete the new configure time tags creation facility based on
+	the ltcf-*.sh and ltconfig.in files from multi-language-branch:
+	* libtool.m4:  More refactoring and reformatting.
+	(_LT_AC_LANG_GCJ_CONFIG): Merged ltcf-gcj.sh from
+	multi-language-branch.
+	(_LT_AC_LANG_CXX_CONFIG): Merged ltcf-cxx.sh from
+	multi-language-branch.
+	* configure.in (AC_PROG_CXX, LT_AC_PROG_GCJ): Compiler checks must
+	be done before AC_PROG_LIBTOOL which appends tags based on their
+	results.
+
+2001-06-12  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* docs/libtool.texi: Updated the libltdl interface documentation
+	to bring it up to date.
+
+2001-06-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* demo/Makefile.am (objdir): Use `libtool --config' for
+	extracting configuration values, since a given value may
+	be present in each tag.
+	(hc-libpath): Ditto.
+	(hc-minusL): Ditto.
+	* libtool.m4 (_LT_AC_TAGCONFIG): Add tagged configurations from
+	the --with-tags option.
+	(_LT_AC_LTCONFIG_HACK): Factored out into separate configuration
+	macros -- The interdependencies and running order are still
+	immutable, and need a lot of work to fix.
+	(AC_LIBTOOL_CONFIG): Taken from the previous incarnation of
+	_LT_AC_LTCONFIG_HACK -- this macro is used both to create the
+	primary (C language) libtool configuration from
+	_LT_AC_LTCONFIG_HACK and also to append tagged configurations from
+	_LT_AC_TAGCONFIG.
+	* NEWS:  Merged from multi-language-branch.
+
+2001-06-06  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* bootstrap: Added tagdemo and pdemo tests from
+	multi-language-branch.
+	* configure.in: Added pdemo and tagdemo to CONF_SUBDIRS
+	and merged references to CXX and GCJ from multi-language-branch.
+	* pdemo: Added test directory from multi-language-branch.
+	* tagdemo: Added test directory from multi-language-branch.
+	* tests/Makefile.am: Merged additional tests from
+	multi-language-branch.
+	* tests/pdemo-*.test: ditto.
+	* tests/tagdemo-*.test: ditto.
+
+2001-05-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4: Merged ltconfig.in from multi-language-branch.
+
+2001-05-28  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4: Reformatting for consistency, and some refactoring
+	in preparation for ltcf-*.sh merge.
+
+2001-05-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in: Merged from multi-language-branch.
+	* libtool.m4: Merged from multi-language-branch.
+	* ChangeLog: Started afresh.  Old ChangeLog history moved to...
+	* ChangeLog.1: ...here.
+
+2000-06-04  Mark Mitchell  <mark@codesourcery.com>
+
+	* ltcf-c.sh (archive_cmds, archive_expsym_cmds) [solaris,
+	with_gcc]: Use `gcc -shared' to build a shared library.
+
+2001-06-04  John David Anglin  <dave@hiauly1.hia.nrc.ca>
+
+	* ltcf-c.sh (archive_cmd) [hpux, with_gcc]: Use gcc to link shared
+	archives.
+
+2001-05-28  Simon Patarin <simon.patarin@inria.fr>
+
+	* ltcf-cxx.sh (osf3/osf4/osf5): Support creation of C++  shared
+	libraries when using g++ with native linker.
+
+2001-05-28  Albert Chin  <china@thewrittenword.com>
+
+	* ltconfig.in (version_type, soname_spec) [aix4* | aix5*]: Use
+	linux-style versioning, and remove trailing .o from soname_spec.
+
+2001-05-22  Alexandre Oliva  <aoliva@redhat.com>
+
+	* ltcf-cxx.sh (allow_undefined_flag, no_undefined_flag)
+	[aix4*|aix5*]: Prepend blank.
+
+2001-05-20  Alexandre Oliva  <aoliva@redhat.com>
+
+	* configure.in: Reverted to 1.4, to avoid confusion with MLB.
+	Mainline is the release snapshot, except for the ChangeLog version
+	number, until the multi-language branch is merged into it.
+
+	* ltconfig.in: Fix sh.test regression introduced in previous patch.
+
+	* ltconfig.in (lt_cv_sys_max_cmd_len): Improve test to work better
+	in case of non-built-in echo.  Set bounds correctly.
+
+	* ltcf-cxx.sh (allow_undefined_flag) [aix4* | aix5*]: Fix quote
+	error.
+
+	* ltmain.in (exec_cmd): New variable.  Don't exec programs within
+	the big `case'; set the variable instead, and exec the cmd
+	afterwards, so that the shell gets a chance to clean up here-doc
+	files.
+	* NEWS: Update.
+
+2001-05-16  Alan Modra  <amodra@one.net.au>
+
+	* libtool.m4 (lt_cv_deplibs_check_method): pass_all for hppa*-linux.
+
+2001-05-03  Andreas Jaeger  <aj@suse.de>, Andreas Schwab  <schwab@suse.de>
+
+	* ltmain.in (relink_command): Arrange for wrapper script to save
+	output to a variable and display it only if relinking fails.
+
+2001-04-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.in: bumped version to 1.4a.
+
+	GNU libtool 1.4 was released.
+
+	* configure.in: Bumped version to 1.4.
+	* config.sub, config.guess:  Synchronised from ftp.gnu.org.
+	* NEWS: updated.
+
+2001-04-24  Peter Eisentraut  <peter_e@gmx.net>
+
+	* libtool.m4: Support $host_os as /sysv5uw7*/ from newer
+	config.guess in addition to older /unixware*/.  Use compiler
+	driver, not linker, for linking shared libraries.
+
+2001-04-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4, ltmain.in, libltdl/configure.in,
+	tests/quote.test:  Remove stale references to ltconfig.
+
+	* ltdl.m4 (AC_C_INLINE): No longer required.
+	* libltdl/ltdl.c (strdup, strcmp, strchr, strrchr, memcpy, trim,
+	free_vars):  Revoke inline keyword from declarations.  `static
+	inline' is not very portable, and in addition Unixware 7.1.1's
+	compiler says you can't access static variables from inline
+	functions.
+	Reported by Peter Eisentraut  <peter_e@gmx.net>
+
+2001-04-24 Albert Chin-A-Young <china@thewrittenword.com>
+
+	* libtool.m4: Handle case where /bin/nm -p outputs multiple
+	symbol types (like under HP-UX 11.00).
+
+2001-04-24  Thomas Tanner  <tanner@ffii.org>
+
+	* TODO: describe problems with libltdl
+	* ltmain.in (ILD): tidy up, add comments, remove dead code,
+	  merge duplicate code
+	* ltmain.in (ILD): don't touch newdependency_libs after scan or
+	  dlopen pass
+	* ltmain.in (ILD): don't dlpreopen dependency_libs of a dlopened
+	  module (remove absolutely wrong quick hack)
+	* ltmain.in (ILD): remove wrong comments about duplicate removal
+	* ltmain.in (ILD): build a static-only module if it has
+	  static libraries in its dependencies (so that libltdl can
+	  safely load dependency_libs)
+	* ltmain.in (argument parsing): prefix comparsions of -l args with X,
+	  replace -lc with `-framework System' _after_ the ILD passes
+	* ltmain.in (argument parsing): support dl[pre]open
+	  for both .o and .lo files
+	* ltmain.in (deplibs_check): use portable test syntax
+	* ltmain.in (help): document -prefer-[non-]pic flags
+	* ltmain.in: improve readablity by adding some comments,
+	  rename uninst_* to notinst_* (more adequate name)
+
+2001-04-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/PLATFORMS:  More updates from subscribers to
+	libtool@gnu.org.
+
+	From Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu>
+	* tests/Makefile.am (TESTS_ENVIRONMENT): Make sure the *.test
+	scripts get the same make that was used in the top level
+	directory.
+
+2001-04-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/PLATFORMS:  Updated with more platforms successfully
+	tested by members of libtool@gnu.org.
+
+2001-04-23  Peter Eisentraut  <peter_e@gmx.net>
+
+	* doc/PLATFORMS:  With this patch, freebsd4.3 passes the test
+	suite.
+	* libltdl/ltdl.c (lt_dlexit): Quit loop if only resident modules
+	are left.
+
+2001-04-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/PLATFORMS:  With this patch, my Solaris boxes now pass the
+	test suite,  Yay!
+	From Albert Chin-A-Young <china@thewrittenword.com>
+	* ltmain.in:  `test -L' is not portable, and infact breaks uninstall
+	mode on Solaris.  Fallback to `test -h' and finally `test -f',
+	but be careful not to let the failure status cause libtool to
+	stop.
+
+	From Simon Spero <ses@ibiblio.org>
+	* ltdl.m4 (AC_LTDL_DLSYM_USCORE):  Add $LIBADD_DL while
+	checking for dlsym _.
+
+	From Simon Spero <ses@ibiblio.org>
+	* libtool.m4 (lt_cv_deplibs_check_method) [darwin]: Set it!
+
+	* TODO: Make a note to undo this later.
+	From Christoph Pfisterer <cp@chrisp.de>
+	* libtool.m4: Use $() execution substitution quotation to work
+	around zsh builtin echo \ escape removal.
+
+2001-04-22  Peter Eisentraut  <peter_e@gmx.net>
+
+	* bootstrap: Allow overriding the location aclocal, automake,
+	autoconf, autoheader from the environment.
+
+	* demo/Makefile.am: Automake 1.4e does not allow `+=' assignments
+	if the variable was not set with `=' earlier.  `+=' was not useful
+	here anyway.
+
+2001-04-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltdl.m4 (AC_CHECK_HEADERS): UW7 has sys/dl.h, so we must
+	check for that here.
+	* libltdl/ltdl.c (HAVE_SYS_DL_H):  Include it if necessary for
+	the dlopen loader.
+	Reported by Matthew Schalit <mschalit@pacbell.net>
+
+	* libtool.m4 (AC_DEPLIBS_CHECK_METHOD):  Use pass_all for
+	various releases of UnixWare and OpenServer that support it.
+	Reported by Matthew Schalit <mschalit@pacbell.net>
+
+	* doc/PLATFORMS:  Updated with various platforms successfully
+	tested by members of libtool@gnu.org.
+
+2001-04-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* TODO:  propose pkg-config merge.
+
+2001-04-21  Nick Hudson  <skrll@netbsd.org>
+
+	* ltmain.in: Correct an error in yesterday's patch.
+
+2001-04-20  Nick Hudson  <skrll@netbsd.org>
+
+	* libtool.m4: Improve NetBSD support.
+	* ltmain.in: ditto.
+
+2001-04-19  Dan McNichol <mcnichol@austin.ibm.com>
+
+	* libtool.m4: Build standard shared libraries on AIX POWER
+	more like AIX does, with a shared object archived into lib<xxx>.a.
+	On AIX -bexpall flag does strange things... Don't use it.
+	Fix quotes around -berok flag.  Add support for AIX 5.
+	Add support for run time linking on AIX POWER. (should work
+	on AIX 4.2 and up).  Turn this feature on by adding -brtl flag
+	to LD_FLAGS.  Add support for AIX on IA64. Note: AIX on IA64
+	uses a SYSV type linker.  Add a comment telling what to do if the
+	TOC starts getting too large on AIX.
+	* NEWS: mention aix5 support.
+
+2001-04-18  Alexandre Oliva  <aoliva@redhat.com>
+
+	* TODO: Add -L- flag.
+
+2001-04-11  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 (no_undefined_flag) [Solaris ld]: Change to -zdefs.
+
+2001-04-11  Ossama Othman  <ossama@uci.edu>
+
+	* AUTHORS: Added myself to the list of maintainers.
+
+2001-04-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (hardcode_libdir_flag_spec, osf4/osf5): Use ${wl}
+	to pass -rpath when compiling with gcc.
+	Reported by Tim Mooney <mooney@dogbert.cc.ndsu.NoDak.edu>
+
+	* libltdl/ltdl.c (sys_shl_open): Cache a handle for the `self'
+	module, since HPUX adds module symbols into the `self' pool if
+	it is opened later.  Return the cached pointer if the caller
+	subsequently tries to open `self'.
+	(sys_shl_sym): Diagnose NULL modules.
+
+	From Peter Eisentraut  <peter_e@gmx.net>
+	* ltmain.in (clean,uninstall): test -e is not portable.  Well,
+	neither is -L, but I'm hoping that redirecting error messages
+	to /dev/null and relying on non-zero exit status will work okay
+	on the few hosts that don't support -L.
+
+2001-04-08  Nick Hudson  <skrll@netbsd.org>
+
+	* ltmain.in: Improve check for valid -version-info parameter.
+
+2001-04-08  Gary V. Vaughan  <gary@gnu.org>
+
+	From Nick Hudson  <skrll@netbsd.org>
+	* doc/Makefile.am (libtool_TEXINFOS): Add fdl.texi so that it
+	is included in the distribution.
+
+2001-04-07  Peter Eisentraut  <peter_e@gmx.net>
+
+	* ltmain.in (clean,uninstall): Do not error if the file doesn't
+	exist and 'rm -f' was used.  Exit with status 1 on error.
+
+2001-04-06  Nick Hudson  <skrll@netbsd.org>
+
+	* ltmain.in: Implement a new deplibs_check_method called
+	match_pattern that does pattern matching on filenames...
+	* libtool.m4: ...use it with NetBSD
+
+2001-04-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (Multiple dependencies): A note about the
+	problems I've reintroduced by reverting the my patch of 2001-03-31.
+
+	From Edward Lee <tailbert@yahoo.com>
+	* libtool.m4: Typos.
+
+	* tests/Makefile.am (TESTS): Delete references to depdemo-dups.test.
+	* tests/depdemo-dups.test:  Removed, as part of the patch
+	reversion below.
+	* ltmain.in: Revert my change from 2001-03-31.  Although it
+	was technically correct, it opens a whole can of worms we don't
+	want to deal with right now.
+
+	From Ahmed Masud <masud@googgun.com>
+	* libltdl/ltdl.c (sys_shl_open):  Return a NULL module handle
+	for self opening.
+	(sys_shl_close):  Be careful not to close a NULL module handle.
+	(sys_shl_sym):  Allow shl_findsym() to open NULL modules, but
+	discard the modified module address it returns.
+
+	* libltdl/ltdl.c (lt_dlopen):  When reading the .la file,
+	reallocate the line buffer size if the line overflows the
+	original buffer.
+	Reported by Nick Hudson <skrll@netbsd.org>
+
+	* NEWS (1.3d) Removed bogus ltconfig reference.
+
+2001-04-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (_LT_AC_LTCONFIG_HACK):  Remove the spurious
+	`dnl' from the help text of --with-pic.
+	Reported by stefan <stefan@lkcc.org>
+
+2001-04-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.in: bumped version to 1.3e.
+
+	GNU libtool 1.3d was released.
+
+	* NEWS: inserted todays date.
+
+2001-04-01  Christoph Pfisterer  <cp@chrisp.de>
+
+	* libtool.m4: Fixed support for Darwin and Rhapsody. Now correctly
+	hardcodes the library path and adds versioning. Other small
+	fixes.
+	* ltmain.in: Fixed special cases for libc and libm on Rhapsody and
+	Darwin. One of them was misplaced. Added version_type case for
+	Rhapsody and Darwin, named "darwin".
+
+2001-03-31  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in: Remove the code for stripping duplicate deplibs
+	from libtool link lines -- duplicates are somtimes necessary
+	to satisfy inter-library dependencies, and never cause link to
+	fail even if they are spurious.
+	* tests/depdemo-dups.test: New file.  Make sure this bug doesn't
+	creep back in again!
+	* tests/Makefile.am (TESTS): Use the new test above.
+
+2001-03-29  Edward M. Lee  <tailbert@yahoo.com>
+
+	* libtoolize.in: Check configure.ac and prefer configure.ac to
+	configure.in.
+
+	* libtoolize.in: change recommendation from AM_PROG_LIBTOOL to
+	AC_PROG_LIBTOOL.
+
+	* libtool.m4: Generate dll/import libraries for cygwin according
+	to the following: libFOO.a (static lib), libFOO.dll.a (import
+	lib), cygFOO-version.dll (dll).  Update postinstall_cmds and
+	postuninstall_cmds to reflect this.
+	* ltmain.in: Generate installed .la files with dlnames set to
+	../bin/cygFOO-version.dll for normal dlls. dlls for modules
+	remain with the .la file.
+
+	* libltdl/ltdl.c:  Use windows paths while calling LoadLibrary.
+
+2001-03-16  Albert Chin  <china@thewrittenword.com>
+
+	* libtool.m4 (save_CPPFLAGS): Fix typo.
+
+2001-03-13  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 (lt_cv_compiler_c_o): Cache it.
+	(lt_cv_compiler_o_lo): Likewise.
+
+2001-03-09  Peter Eisentraut  <peter_e@gmx.net>
+
+	* ltmain.in (clean): Automatically remove $objdir (usually '.libs').
+
+2001-03-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltconfig.in (library_names_spec): Undo latin-1 spaces I pasted
+	in yesterday by mistake.
+
+2001-03-07  Gary V. Vaughan  <gary@gnu.org>
+
+	From Tor Lillqvist <tml@iki.fi>
+	* libtool.m4 (export_symbols): On Windows, if the export_symbols
+	file (which has been passed to libtool with the -export-symbols
+	command line switch) already is a .def file, use it as is.
+
+	* libtool.m4 (library_names_spec): Using m4 quotes correctly this
+	time around!
+
+	From Tor Lillqvist <tml@iki.fi>
+	* libtool.m4 (library_names_spec): Use an appropriate filename
+	prefix for dlls -- lib for mingw; cyg for cygwin; pw for pw32.
+
+2001-03-06  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 (can_build_shared) [AIX 4.[01], GCC]: GCC up to
+	2.96 can't build shared libraries reliably.  Disable them.
+
+	* ltmain.in: When dropping dependencies of a -no-undefined
+	library, give up on building a shared library.
+
+2001-03-05  Akim Demaille  <akim@epita.fr>
+
+	* ltmain.sh: Don't quote the argument of case/esac and
+	assignments.
+	* libtool.m4: Likewise.
+
+2001-03-03  Markus F.X.J. Oberhumer <markus@oberhumer.com>,
+	    Alexandre Oliva <oliva@lsd.ic.unicamp.br>
+
+	* libtool.m4: Added explicit return type to all C functions.
+
+2001-02-22  Gary Vaughan  <gary@gnu.org>
+
+	* NEWS: Updated.
+	* doc/libtool.texi (Thread Safety in libltdl): New node describing
+	the  application the new MT API.
+	* libltdl/ltdl.h: Prototypes.
+	* libltdl/ltdl.c: Use these functions throughout the rest of
+	the file to provide thread locking.
+	(lt_dlmutex_register): New function to set callbacks for
+	multi-threaded calls into libltdl.
+	(lt_dl_mutex_lock): Type of a locking callback function.
+	(lt_dl_mutex_lock): Type of an unlocking callback function.
+	(lt_dl_mutex_seterror): Type of a callback function to save the
+	last libltdl error message in thread local storage.
+	(lt_dl_mutex_geterror): Type of a callback function to retrieve
+	the last saved error message from thread local storage.
+
+2001-02-20  Gary Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_dlcaller_register): dont set an unsigned
+	type to a negative number.
+	Reported by Guenter Millahn <Guenter.Millahn@Informatik.TU-Cottbus.DE>
+
+2001-02-05  Gary V. Vaughan  <gary@gnu.org>
+
+	From Nick Hudson <skrll@netbsd.org>
+	* ltdl.m4 (AC_LTDL_SYS_DLOPEN_DEPLIBS): netbsd* is able to
+	automatically load module deplibs without assistance from
+	libltdl.
+
+2001-02-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (load_deplibs): Make sure the depcount is reset,
+	even when deplibs are not used because of the patch below.
+
+	* ltdl.m4 (AC_LTDL_SYS_DLOPEN_DEPLIBS): If we know that the host
+	architecture automatically loads deplibs, then...
+	* libltdl/ltdl.c (load_deplibs): ...don't manually load each one.
+
+2001-01-31  Gary V. Vaughan  <gary@gnu.org>
+
+	* TODO:  Updated.
+
+	* libltdl/ltdl.c (load_deplibs): If loading a deplib fails,
+	don't sweat -- it may be a lib that is already statically linked
+	into the loading application.
+
+	* libltdl/ltdl.c: Clean up the shadowing of the global handles
+	variable.
+	(LT_DLRESIDENT_FLAGS): Add extra parens to satisfy -Wall.
+	(load_deplibs):  Cast isspace() argument to an int to satisfy
+	-Wall.
+
+2001-01-30  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* AUTHORS: added myself to the list of maintainers.
+
+2001-01-28  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libltdl/Makefile.am (CLEANFILES): Clean conditionally-built
+	libraries.
+
+2001-01-27  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 (ld_shlibs) [aix4*]: Disable on unknown CPU types.
+
+2001-01-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Updated.
+	* doc/libtool.texi (User defined module data): Updated.
+	* libltdl/ltdl.c (lt_dlhandle_next): New function.
+	* libltdl/ltdl.h (lt_dlhandle_next): Prototypes.
+
+2001-01-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Updated.
+	* doc/libtool.texi (User defined module data):  Document it all.
+	* ltdl.m4:  Check for memcpy, or else bcopy.
+	* ltdl.c (lt_caller_data): New type.
+	(lt_dl_handle_struct): Add an lt_caller_data field.
+	(lt_dlcaller_register, lt_dlcaller_set_data,
+	lt_dlcaller_get_data): New functions.
+	(rpl_memcpy): A minimal fallback implementation.
+	(rpl_realloc): A realloc implemented with lt_dlmalloc and
+	lt_dlfree.
+	(LT_DLMALLOC, LT_DLFREE, LT_DLREALLOC, LT_DLMEM_REASSIGN):
+	New memory handling convenience macros.  Use them
+	appropriately throughout the rest of this file.
+	* ltdl.h (lt_dlcaller_register, lt_dlcaller_set_data,
+	lt_dlcaller_get_data): Prototyped.
+
+2001-01-04  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.h:  formatting change.
+
+Continued in ChangeLog.2000
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2002 b/ChangeLog.2002
new file mode 100644
index 0000000..d2c1fdd
--- /dev/null
+++ b/ChangeLog.2002
@@ -0,0 +1,736 @@
+2002-12-31  Benjamin Reed  <ranger@befunk.com>
+
+	* ltmain.in [darwin]: disable lazy linking, needed
+	to resolve C++ global constructor issues
+
+2002-12-30  Ralph Schleicher  <rs@nunatak.allgaeu.org>
+
+	Rework by Robert Boehne <rboehne@gnu.org>
+	* ltmain.in: New link option -shrext.
+	* libtool.m4 (AC_LIBTOOL_CONFIG): New libtool variable shrext.
+	(AC_LIBTOOL_SYS_DYNAMIC_LINKER): Replace all hard coded shared
+	library file name extensions in library_names_spec and
+	soname_spec with $shrext.
+	* doc/libtool.texi (Link mode): Document it.
+
+2002-12-30  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* libtool.m4 (AC_LIBTOOL_LANG_CXX_CONFIG): modify
+	$archive_expsym_cmds to restore support for using
+	.def files via the -export-symbols switch.
+	(AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]): in both the [CXX]
+	branch and the default branch, improve $export_symbols_cmds
+	so that DATA symbols are properly  labelled.  In the default
+	branch, duplicate the _CXX_CONFIG correction for
+	$archive_expsym_cmds.
+
+2002-12-30  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* libtool.m4 (AC_LIBTOOL_RC): AC_PROG_RC doesn't exist --
+	but we do AC_DEFUN something called LT_AC_PROG_RC.
+	Call that instead.
+
+2002-12-30  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_LANG_CXX_CONFIG): Copy the section
+	for Darwin from AC_LIBTOOL_PROG_LD_SHLIBS so that the CXX
+	tag doesn't use the g++ defaults for the OS X compiler.
+
+2002-12-30  Albert Chin-A-Young <china@thewrittenword.com>
+
+	* libtool.m4: Sync methods used to detect GNU ld.
+
+2002-12-20  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_COMPILER_OPTION,
+	AC_LIBTOOL_PROG_CC_C_O): Do not escape } or ? in sed argument.
+
+2002-12-19  Robert Boehne  <rboehne@gnu.org>
+
+	* ltmain.in: Use the sed program found by LT_AC_PROG_SED
+	so that relink commands don't get truncated.
+
+2002-12-18  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4: Move AC_REQUIRE([LT_AC_PROG_SED]) to AC_PROG_LD
+	so it is invoked earlier.
+
+2002-12-11  Allan Sandfeld Jensen  <snowwolf@one2one-networks.com>
+
+	* libtool.m4: Add support for Intel icc compiler for Linux.
+
+2002-12-11  Robert Boehne  <rboehne@gnu.org>
+
+	* ltmain.in: Revert the version +1 change for IRIX, it could
+	cause compatibility problems.
+
+2002-11-22  Christian Cornelssen  <ccorn@cs.tu-berlin.de>
+
+	* libtool.m4 (AC_LIBTOOL_COMPILER_OPTION,
+	AC_LIBTOOL_PROG_CC_C_O): Changed method for compilation with
+	custom flags to be language-independent.  Thereby removed
+	CFLAGS/GCJFLAGS mixup bug.  Imitate Autoconf-style logging.
+	Log entries no longer discarded by compilation failures.
+	(_LT_AC_LANG_C_CONFIG, _LT_AC_LANG_CXX_CONFIG,
+	_LT_AC_LANG_GCJ_CONFIG): Tuned settings of
+	lt_simple_compile_test_code and lt_simple_link_test_code
+	to avoid warnings that could break some option detections.
+	(AC_LIBTOOL_PROG_COMPILER_NO_RTTI): Removed
+	redundant "-c conftest.$ac_ext" in the argument to
+	AC_LIBTOOL_COMPILER_OPTION.
+	(AC_LIBTOOL_PROG_LD_SHLIBS): Replaced C-specific conftest
+	source code with $lt_simple_compile_test_code, to support
+	the "-lc" test with other languages.
+
+2002-11-19  Paul Eggert  <eggert@twinsun.com>
+
+	Don't assume that egrep and fgrep exist.  POSIX 1003.1-2001 no
+	longer requires them; you're supposed to use grep -E and grep -F
+	instead.  Also, don't assume that "test -a" works, since POSIX
+	doesn't require it.
+
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER, _LT_AC_LANG_C_CONFIG,
+	_LT_AC_LANG_CXX_CONFIG, AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE,
+	AC_LIBTOOL_PROG_LD_SHLIBS):
+	egrep -> grep, when that makes no difference.
+	* libtoolize.in: Likewise.
+	* ltdl.m4 (AC_LTDL_SYMBOL_USCORE): Likewise.
+	* ltmain.in: Likewise.
+	* demo/Makefile.am (hc-direct): Likewise.
+	* pdemo/Makefile.am (hc-direct): Likewise.
+	* tests/build-relink.test, tests/build-relink2.test,
+	tests/cdemo-conf.test, tests/cdemo-shared.test,
+	tests/cdemo-static.test, tests/demo-conf.test,
+	tests/demo-nofast.test, tests/demo-shared.test,
+	tests/demo-static.test, tests/depdemo-conf.test,
+	tests/depdemo-nofast.test, tests/depdemo-shared.test,
+	tests/depdemo-static.test, tests/hardcode.test,
+	tests/mdemo-conf.test, tests/mdemo-shared.test,
+	tests/mdemo-static.test, tests/pdemo-conf.test,
+	tests/tagdemo-conf.test, tests/tagdemo-shared.test,
+	tests/tagdemo-static.test: Likewise.
+
+	* libtool.m4 (AC_PROG_EGREP):
+	New macro, defined if Autoconf doesn't define.
+	(AC_PATH_TOOL_PREFIX, AC_PROG_LD_GNU): Use it.
+	(AC_PROG_LD, AC_PROG_NM, AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE):
+	Use shell pattern matching rather than egrep.
+	(AC_LIBTOOL_CONFIG): Set lt_EGREP and EGREP.
+
+	* demo/Makefile.am (SET_HARDCODE_FLAGS): Use sed instead of egrep.
+	* pdemo/Makefile.am (SET_HARDCODE_FLAGS): Likewise.
+
+	* tests/defs (EGREP, FGREP): New vars.
+
+	* ltmain.in: egrep -> $EGREP
+	* tests/assign.test, tests/demo-exec.test, tests/demo-inst.test,
+	tests/pdemo-exec.test, tests/pdemo-inst.test, tests/sh.test:
+	Likewise.
+
+	* tests/hardcode.test: fgrep -> $FGREP
+
+	* tests/f77demo-exec.test: test -a -> test &&
+
+2002-11-18  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* ltmain.in: When using gcc, pass -mfoo to the linker
+	via $compiler_flags in order to pass architecture information to
+	the linker (e.g. 32 vs 64-bit). This may also be accomplished via
+	-Wl,-mfoo but this is not reliable with gcc because gcc may use
+	-mfoo to select a different linker, different libraries, etc, while
+	-Wl,-mfoo simply passes -mfoo to the linker. If there is a better
+	solution, please let me know what it is.
+
+2002-11-18  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* tests/Makefile.am: Conditional assignment of FFLAGS = @FFLAGS@
+	does not appear to be necessary given that Automake makes this
+	assignment by default.  The condition is removed since Automake
+	1.7.1 complains about it.
+
+2002-11-18  Jakub Jelinek  <jakub@redhat.com>
+
+	* libtool.m4: Support linking of 64-bit libraries on
+	sparc{,v[789]}-*linux*, s390*-*linux*, ppc*-*linux*
+	GNU/Linux systems when the platform default is to build
+	32-bit libraries.
+
+2002-11-18  Andreas Jaeger  <aj@suse.de>, Bo Thorsen  <bo@suse.de>
+
+	* libtool.m4: Support linking of 32-bit libraries with ld
+	on the x86-64, ppc64, s390x and sparc64 GNU/Linux systems.
+
+2002-11-18  Akim Demaille  <akim@epita.fr>
+
+	* ltmain.in: Do not change the PATH in the wrappers: let them
+	launch the real binary using its path.
+
+2002-11-18  Kevin Ryde  <user42@zip.com.au>
+
+	* doc/libtool.texi (Library tips): Note array dimensions.
+
+2002-11-18  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* tests/*.test: MinGW's MSYS treats files under /dev
+	specially. This causes 'test -r /dev/null/config/site' to
+	improperly report success, causing configure to fail. Change the
+	CONFIG_SITE definition from "/dev/null/config/site" to
+	"/nonexistent" to avoid this problem.
+
+2002-11-18  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* libtool.m4 (_LT_AC_LOCK): remove support for ancient
+	versions of mingw and cygwin.
+	(AC_LIBTOOL_POSTDEP_PREDEP): new function.
+	moved the "find hidden library dependencies" code here
+	from AC_LIBTOOL_LANG_CXX_CONFIG.  Attempted to make it
+	multi-tag compatible, but currently only CXX calls it.
+	(AC_LIBTOOL_LANG_CXX_CONFIG): set
+	enable_shared_with_satic_runtimes to 'no' by default
+	Set it to 'yes' for cygwin, mingw, pw32. Replace
+	"find hidden library dependencies" code with a call
+	to the new function AC_LIBTOOL_POSTDEP_PREDEP.
+	Consolidate cygwin and mingw/pw32 stanzas.
+	(AC_LIBTOOL_LANG_F77_CONFIG): set
+	enable_shared_with_static_runtimes to 'no' by default
+	(AC_LIBTOOL_CONFIG): add
+	enable_shared_with_static_runtimes to the list of variables
+	to write into ltmain.sh; include it in the libtool script
+	template as allow_libtool_libs_with_static_runtimes.
+	(AC_LIBTOOL_PROG_LD_SHLIBS): set
+	enable_shared_with_static_runtimes to 'no' by default
+	Set it to 'yes' for cygwin, mingw, pw32.
+	(AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE): only put cr in regexp
+	if the build_os is mingw, not host_os
+
+	* ltmain.in (case deplibs_check_method): for all appropriate
+	cases, if allow_libtool_libs_with_static_runtimes, then remove
+	predeps and postdeps from the list of dependencies that must
+	be checked for "dynamicness".  For the "none" case, the
+	presence of compiler-generated postdeps and predeps should
+	not trigger "inter-library dependencies not supported" error.
+	(initial setup after arg processing): on cygwin/mingw, allow
+	compiler-generated dependent libs to be duplicated without
+	elimination.
+	(initial search loop for deplibs): if the deplib in question
+	is a libtool lib, then if
+	allow_libtool_libs_with_static_runtimes then parse the .la file.
+	If the .la file only has an "old_library", add the deplib
+	directly to the deplibs list (-lstdc++) and DON'T use the .la
+	file; this allows the (case deplibs_check_method) change above
+	to take effect.
+	* ltmain.in (for pass in $passes loop): remove predeps,
+	postdeps, and compiler_lib_search_path from dependency_libs.
+
+2002-11-08  Robert Boehne  <rboehne@gnu.org>
+
+	* doc/libtool.texi: Add --mode=* to every example using libtool.
+
+2002-11-03  Ossama Othman  <ossama@doc.ece.uci.edu>
+
+	* ltmain.in: add support for installing into temporary
+	staging area (e.g. 'make install DESTDIR=...')
+
+2002-11-03  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* libtool.m4 (AC_LIBTOOL_LANG_CXX_CONFIG): restore setting
+	allow_undefined_flag=unsupported for cygwin and mingw.
+	(AC_LIBTOOL_PROG_LD_SHLIBS): ditto, for both "normal" gcc/ld
+	and for the (unmaintained?) MSVC case.
+
+2002-11-03  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* doc/libtool.texi (Install mode): document new
+	-inst-prefix option.
+
+2002-11-02  Robert Boehne  <rboehne@gnu.org>
+
+	* ltmain.in: Print a warning if the mode is not specified.
+	* doc/libtool.texi: Document the change that the mode must be
+	specified.
+
+2002-10-30  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_CC_C_O): use printf, not
+	echo. (AC_DEPLIBS_CHECK_METHOD): use new shell function
+	win32_libid on w32 platforms
+	* ltmain.in: add new section for shell functions. Add
+	win32_libid() shell function.
+	* f77demo/Makefile.am: add -no-undefined flag
+
+2002-10-30  Rob Browning  <rlb@defaultvalue.org>
+
+	* ltdl.c (realloc): Remove custom realloc. (#define
+	rpl_realloc realloc) and comment out later code for custom
+	realloc. You can't define your own malloc unless you know
+	enough about the malloc in use to be able to tell how big
+	the src ptr is. The disabled code incorrectly used the
+	*destination* ptr to decide how much to copy. This
+	sometimes results in out-of-bound accesses which cause
+	segfaults. This is a quick hack for now; we may want
+	something cleaner later.
+	(tryall_dlopen_module): check to be sure (dirname_len > 0) before
+	testing first character against '/'.
+	(try_dlopen): check for feof(file) in read loop -- otherwise
+	infinite loop?
+
+2002-10-25  Robert Boehne  <rboehne@gnu.org>
+
+	* ltmain.in (-XCClinker): New flag passes a linking option
+	directly to the compiler driver without appending ${wl}.
+
+2002-10-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* README-alpha: Add some release note templates for inspiration
+	and consistency at release time.
+
+	* Makefile.am (cvs-diff): Compress the generated diff file, ready
+	for upload to ftp.gnu.org.
+
+2002-10-25  Howard Chu  <hyc@highlandsun.com>
+
+	* ltmain.in [aix]: Be sure to deal with xlc_r, cc_r and other
+	compiler variants.
+
+2002-10-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (_LT_AC_FILE_IMPGEN_C): Removed.  No longer used.
+	(_LT_AC_FILE_LTDLL_C): Ditto.
+	(AC_LIBTOOL_CONFIG) [cygwin, mingw, pw32, os2]: Don't call
+	_LT_AC_FILE_LTDLL_C or _LT_AC_FILE_IMPGEN_C.
+
+2002-10-25  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: When LDFLAGS="-Wl,-brtl,[other options]", the
+	-brtl special-case code for AIX never gets triggered because
+	were are being too specific about how we search for -brtl.
+	Use case statement to avoid this. Remove extraneous
+	semicolon.
+	* ltmain.in: Recognize the IBM xlc compiler.
+
+2002-10-24  Andrew Suffield  <asuffield@debian.org>
+
+	* libltdl/ltdl.c (lt_dlopenext): Corrected sense of "file not
+	found" check.
+
+2002-10-24  Ossama Othman  <ossama@doc.ece.uci.edu>
+
+	* ltmain.in: Support compiler names matching g++*
+
+2002-10-23  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* libtool.m4: Removed old Windows cruft.
+	* libtool.m4: Adapted pw32 to be like Cygwin/MinGW.
+
+2002-10-23  Robert Boehne  <rboehne@gnu.org>
+
+	ltmain.in: Do not add 1 to the version under IRIX, it is
+	not necessary.
+
+2002-10-15  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): avoid long delay on
+	 cygwin/Win9x when computing commandline length.
+	(AC_LIBTOOL_SYS_DYNAMIC_LINKER): fix postinstall_cmds when
+	sources are in a subdirectory
+	* ltdl.m4 (AC_LTDL_SYSSEARCHPATH): use $PATH_SEPARATOR, not
+	$ac_path_separator
+	* configure.ac: move depdemo-specific stuff.  You must configure
+	libtool before you can try './libtool --features'.
+	* mdemo-inst.test: set $PATH to include the directory in which
+	the modules are installed (on cygwin, DLL search path is the
+	$PATH)
+
+2002-10-15  Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+
+	* ltmain.in: MinGW works identically to Cygwin.
+	* libtool.m4: lt_cv_sys_max_cmd_len hard-coded to 8192
+	*  Model MinGW configuration after Cygwin configuration.
+	Some portions share implementation.
+
+2002-10-15  Elizabeth Barham <soggytrousers@yahoo.com>
+
+	* libtool.m4: Pattern MinGW library naming after that
+	used by Cygwin except use 'lib' prefix rather than 'cyg'.
+	* Transfer some configuration from Cygwin with adjustments
+	for MinGW.
+
+2002-10-15  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: When a module is built for AIX, the 'lib'
+	prefix isn't needed, neither is the version. AIX dlopen
+	will honor the RPATH in a library.
+
+2002-10-11  Christoph Egger  <Christoph_Egger@gmx.de>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS, darwin): Add
+	-install_name to the link line only when -dynamiclib is
+	specified for a module.  Use -bind_at_load when linking C++
+	shared libraries.
+
+2002-10-04  Elizabeth Barham  <soggytrousers@yahoo.com>
+
+	* libtool.m4 (AC_LIBTOOL_SETUP): GCC now checks -shared to
+	create a dll for Windows targets.
+
+2002-09-24  Robert Boehne  <rboehne@gnu.org>
+
+	* ltmain.in: Fixed a few spelling errors.
+
+2002-09-17  Robert Boehne  <rboehne@gnu.org>
+
+	* libltdl/ltdl.c: Commented out access() call that checks for a
+	library file's existence and permissions, as it appears to fail
+	in every case.
+
+2002-09-09  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: Custom $symcode for Tru64 UNIX to catch 'Q',
+	read-only constants.
+
+2002-09-09  Rainer Orth  <ro@TechFak.Uni-Bielefeld.de>
+
+	* libtool.m4 (osf[345]): Append $major to soname_spec.
+	Reflect this in library_names_spec.
+	* ltmain.in (osf): Prefix $major with '.' for use as extension.
+
+2002-08-28  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* ltdl.m4 & libltdl/ltdl.c: Port fully to native Win32 API.
+
+2002-07-31  Robert Boehne  <rboehne@gnu.org>
+
+	* f77demo/.cvsignore: New file, forgotten in the last commit.
+
+2002-07-31  Eric Lindahl  <erik@theophys.kth.se>
+
+	* libtool.m4 (AC_PROG_LIBTOOL): Added support for the new F77
+	Fortran support tag.
+	(AC_LIBTOOL_PROG_CC_C_O, _LT_AC_TAGCONFIG): Support F77 tag.
+	(AC_LIBTOOL_F77, _LT_AC_LANG_F77, AC_LIBTOOL_LANG_F77_CONFIG):
+	New macros for F77 tag Fortran support.
+	* configure.ac: Add support for creating the new F77 tag.
+	* bootstrap: Add f77demo directory to the list to be processed.
+	* Makefile.am: Add support for FFLAGS and FLIBS.
+	* tests/Makefile.am: Add new Fortran tests.
+	* tests/f77demo-*.test: New files.
+	* f77demo/configure.ac, f77demo/cprogram.c, f77demo/fooc.c
+	* f77demo/foof.f, f77demo/foo.h, f77demo/fprogram.f
+	* f77demo/Makefile.am, f77demo/README: New files.
+
+2002-07-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (tryall_dlopen): We need to catch missing file
+	errors early so that file_not_found() can detect what happened.
+
+2002-06-26  Bob Friesenhahn  <bfreisen@simple.dallas.tx.us>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [mingw]: Remove
+	extraneous '=' character which appears in gcc 3.1
+	-print-search-dirs output.
+	Handle both upper and lower case drive letters when testing for
+	Windows vs POSIX style path output from -print-search-dirs
+	output.
+
+2002-06-24  Robert Boehne  <rboehne@gnu.org>
+
+	* ltmain.in (Piecewise linking): Add a clause to skip creating
+	the export file until the reloadable object file(s) have been
+	created, then use them as input for $export_symbols_cmds.
+
+2002-06-23  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* ltdl.m4 (AC_LTDL_SYS_DLOPEN_DEPLIBS): Need to quote [ and ] for
+	Autoconf.
+
+	* ltdl.m4 (AC_LTDL_SYS_DLOPEN_DEPLIBS): HP/UX needs
+	libltdl_cv_sys_dlopen_deplibs set to yes.
+
+2002-06-23  Kevin Ryde  <user42@zip.com.au>
+
+	* libtool.m4 (AC_LIBTOOL_SETUP, _LT_AC_LOCK): Use
+	AC_PROVIDE_IFELSE to test AC_LIBTOOL_WIN32_DLL and
+	AC_LIBTOOL_DLOPEN, necessary for autoconf 2.53.
+
+2002-06-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (argz_insert): Actually, BEFORE can be NULL
+	when *PARGZ_LEN is non-NULL, so the assertion to the contrary was
+	bogus.
+	Reported by Bob Friesenhahn <bfreisen@simple.dallas.tx.us>
+	and Albert Chin-A-Young <china@thewrittenword.com>
+
+2002-06-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (foreach_dirinpath): Ensure that filename is '\0'
+	terminated by all code paths.
+	Reported by Lutz Müller <lutz@users.sourceforge.net>
+
+2002-06-20  Gary V. Vaughan  <gary@gnu.org>
+
+	From Kevin Ryde  <user42@zip.com.au>:
+	* doc/libtool.texi (Platform quirks): s/dependan/dependen/
+	* libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Ditto.
+	* TODO: Ditto.
+
+2002-06-13  Rainer Orth  <ro@TechFak.Uni-Bielefeld.DE>
+
+	* ltmain.in (irix, nonstopux): Set major before use.
+
+2002-06-11  Daniel Kobras  <kobras@linux.de>
+
+	* libltdl/ltdl.c (try_dlopen): Don't return bogus handle to user
+	  if tryall_dlopen() fails.
+
+2002-06-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/pdemo-exec.test: Typo.  s/hell-static/hell_static/
+
+2002-05-31  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* NEWS: Updated.
+	* libtool.m4: use $NM to create the symbol list on cygwin, not
+	$ltdll_cmds as on mingw.  For all tags, (and host=cygwin) set
+	allow_undefined_flag="" so that the --auto-import magic
+	works properly.  For all tags (and host=cygiwn) set
+	always_export_symbols=no -- it is unnecessary thanks to
+	binutils' auto-export magic.
+	* libltdl/ltdl.c: Don't force cygwin to use the LoadLibrary
+	wrapper; use cygwin's builtin implementatino of dl*.
+	* cdemo/Makefile.am: the downside of unsetting
+	'allow_undefined_flag' -- we must include -no-undefined
+	in the _la_LDFLAGS variable.
+	* depdemo/l1/Makefile.am: ditto.
+	* depdemo/l2/Makefile.am: ditto.
+	* depdemo/l3/Makefile.am: ditto.
+	* depdemo/l4/Makefile.am: ditto.
+	* mdemo/Makefile.am: ditto.
+	* tagdemo/Makefile.am: ditto.
+	* demo/Makefile.am: ditto.  But also, we must make special
+	provision to clean up the hell0 wrapper script.
+	* pdemo/Makefile.am: ditto -no-undefined.  ditto hell0.
+	And use 'hell_static' instead of 'hell.static'.
+	* tests/pdemo-inst.test: use 'hell_static' instead
+	of 'hell.static'.
+	* tests/pdemo-exec.test: ditto.
+
+2002-05-30  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* tests/build-relink2.test: look for installed libl3.la
+	in $prefix/lib/ as well as $prefix/lib/extra/.
+
+2002-05-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/hardcode.test: Use libtool --config to collect the
+	variable values for the test, otherwise the tag values interfere
+	with a straight grep.
+
+2002-05-30  Gary V. Vaughan  <gary@gnu.org>
+
+	Finally fix the annoying bug which always adds all tags to the
+	libtool script built by your project configure.  Now we set the
+	default tags depending on whether AC_PROG_CXX et. al. are actually
+	called from configure.ac.
+
+	* libtool.m4 (_LT_AC_TAGCONFIG): Don't default the tagnames when
+	no --with-tags argument is given.
+	(_LT_AC_SHELL_INIT): Factored out from the AC_DIVERT_PUSH code
+	in...
+	(_LT_AC_PROG_ECHO_BACKSLASH): ...which now calls the macro
+	instead.
+	(AC_LIBTOOL_CXX): Use _LT_AC_SHELL_INIT to add CXX to the
+	initialisation sequence for tagnames.
+	(AC_LIBTOOL_GCJ): Similarly for GCJ tag.
+	(AC_LIBTOOL_RC): Likewise for RC tag.
+
+2002-05-21  Jon Meredith  <jonm@alchemetrics.co.uk>
+
+	* ltmain.in: Fix a problem on SCO OpenServer5 that caused a
+	failure in three depdemo-make tests. For some reason the linker
+	tries to find the dependent libraries using the library search
+	path before it has read the libraries specified with absolute
+	paths in the full commandline. This patch add -L's for each of
+	the dependent library directories so that they can be resolved.
+
+2002-05-09  Nick Hudson  <skrll@netbsd.org>
+
+	* libtool.m4: Update support for NetBSD
+	* ltdl.m4: Make sure that libltdl_cv_func_dlopen and
+	libltdl_cv_lib_dl_dlopen are set and used instead of the
+	ac_cv_ versions. Also, use lt_cv_sys_global_symbol_pipe
+	instread of global_symbol_pipe. This fixes the detection of
+	dlopen on BSD derived plaforms and more importantly fixes
+	need_uscore detection.
+
+2002-05-06  Paul Eggert  <eggert@twinsun.com>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS): head -1 -> sed 1q to
+	port to POSIX 1003.1-2001 hosts, like textutils 2.0.21 with
+	_POSIX2_VERSION=200112.
+
+2002-05-06  Paul Eggert  <eggert@twinsun.com>
+
+	* ltmain.in: Don't assume that "sort +2" works, as POSIX
+	1003.1-2001 says that "sort +2" is supposed to sort the file
+	named "+2".  An example host that behaves like this is
+	textutils 2.0.21 with _POSIX2_VERSION=200112.
+
+2002-05-06  Loren James Rittle  <rittle@latour.rsch.comm.mot.com>
+
+	* ltmain.in: Detect and handle object name conflicts while
+	piecewise linking a static library.
+
+2002-05-02  Dave Vasilevsky  <thevas@mac.com>
+
+	* ltmain.in: Remove convenience libraries from deplibs for Darwin.
+
+2002-05-02  Fritz Elfert  <felfert@to.com>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS): Modify archive_expsym_cmds
+	to catch properly handle dll alias symbols.
+
+2002-04-24  Kevin Ryde  <user42@zip.com.au>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Use $build_os not $host_os.
+
+2002-04-14  Robert Boehne  <rboehne@gnu.org>
+
+	* doc/libtool.texi (C++ libraries): Finally updated to reflect
+	Libtool's support for C++.
+
+2002-04-14  Jean-Frederic Clere  <jfrederic.clere@fujitsu-siemens.com>
+
+	* libtool.m4: Update support for Fujistu-Siemens Computers (FSC).
+	* ltmain.in: Add support for EBCDIC based systems.
+
+2002-04-07  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4 (LT_AC_PROG_SED): Refactor, removing temporary directory
+	and consistent use of the shell variable namespace "lt_ac_".
+
+2002-04-02  Robert Boehne  <rboehne@gnu.org>
+
+	* ltmain.in: Finish the tag matching logic started yesterday and
+	refactor it a bit.
+
+2002-04-01  Robert Boehne  <rboehne@gnu.org>
+
+	* ltmain.in: Handle the case when no tag is explicitly set, and
+	$base_compile has a space in front of $CC, and revert the setting
+	of tagname checked in on 2002-3-14.
+
+2002-04-01  Robert Boehne  <rboehne@gnu.org>
+
+	* tagdemo/foo.cpp: Use C++ IO to catch problems linking to C++
+	runtime libraries.
+	* tagdemo/main.cpp: Ditto.
+
+2002-03-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* TODO: Removed obsolete comments about RMS' package system.
+
+2002-03-14  Robert Boehne  <rboehne@gnu.org>
+
+	ltmain.in: Touch-up to make testsuite pass, and default tagname
+	to CC when it isn't explicitly set.
+
+2002-03-14  Anthony Green  <green@redhat.com>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_CC_C_O): Albert Chin's gcj fix.
+	(AC_LIBTOOL_PROG_COMPILER_PIC): Per Bothner's change for not
+	using -DPIC with gcj.
+
+2002-03-11  Bruce Korb  <bkorb@gnu.org>
+
+	* ltmain.in(compile): bring a touch of order to the option processing
+
+2002-02-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Updated.
+	* THANKS: Added Rob Collins and Chuck Wilson for their cygwin
+	work.
+
+	From Robert Collins  <robert.collins@itdomain.com.au>:
+	* configure.ac (AC_EXEEXT): Needed for DOSish systems.
+	* libtool.m4 (shlibpath_overrides_runpath) [cygwin]: Set to yes
+	when compiling with gcc.
+	(lt_prog_compiler_pic) [cygwin]: No longer needs the -DDLL_EXPORT
+	hack, so we just say the pic is the default.
+	(AC_LIBTOOL_PROG_LD_SHLIBS) [cygwin]: Extract symbols from a
+	library normally.
+	[cygwin]: Declare C++ compiler characterisics for g++, taking into
+	account the new auto-import support in cygwin ld.
+	* ltmain.in (specialdeplibs) [cygwin]: Be careful about
+	eliminating duplicate -lgcc's from the link line.
+	[cygwin]: Be smarter about .exe suffixes.
+	* demo/configure.ac (AC_EXEEXT, AC_LIBTOOL_WIN32_DLL):  Support
+	DOSish systems properly.
+	* depdemo/configure.ac (AC_EXEEXT, AC_LIBTOOL_WIN32_DLL):  Ditto.
+	* demo/Makefile.am (deplibs-check): Allow for .exe suffix.  Use
+	hell_static instead of hell.static for multi-`.' inhibited OSes.
+	* tests/demo-exec.test: Ditto.
+	* tests/demo-inst.test: Ditto.
+	* demo/foo.h [cygwin]: Sanitize cygwin dll support.
+	* demo/foo.c (_LIBFOO_COMPILATION_): No longer required.
+	* demo/hello.c (_LIBFOO_COMPILATION_): Ditto.
+	* depdemo/Makefile.am (bin_PROGRAMS): Use depdemo_static instead
+	of depdemo.static for multi-`.' inhibited OSes.
+	* tests/depdemo-exec.test: Ditto.
+	* tests/depdemo-inst.test: Ditto.
+	* mdemo/Makefile.am (bin_PROGRAMS):  Ditto for mdemo.static.
+	* tests/dryrun.test: Ditto.
+	* tests/mdemo-exec.test: Ditto.
+	* tests/mdemo-inst.test: Ditto.
+	* tests/build-relink.test:  Be careful about possible .exe
+	suffixes.
+	* tests/noinst-link.test: Allow for .exe suffix.
+
+2002-02-07  Alexandre Oliva  <aoliva@redhat.com>
+
+	Reverted incorrect patch:
+	2001-10-24  H.J. Lu  <hjl@gnu.org>
+	* ltmain.sh: Allow link against an archive when building a
+	shared library.
+	* libtool.m4 (lt_cv_deplibs_check_method): Always use
+	file_magic for Linux ELF.
+
+2002-01-30  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* libtool.m4 (LT_AC_PROG_SED): Removed a mysterious newline.
+
+2002-01-28  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* libtool.m4 (LT_AC_PROG_SED): New macro tests sed for truncation of
+	output.  AC_REQUIRE the new macro.
+	* ltmain.in: Use $SED rather than plan old sed, as set by the new
+	macro LT_AC_PROG_SED.
+
+2002-01-10  Volker Christian  <voc@soft.uni-linz.ac.at>
+
+	* libltdl/ltdl.c (find_handle_callback): treat the result of a call
+	to access(2) correctly when deciding whether a library can be found
+	in a directory from user_search_path.
+
+2002-01-07  Robert Boehne  <rboehne@ricardo-us.com>
+
+	* NEWS: Fixed wrong path for texinfo.tex.
+	* configure.ac: Bumped version to 1.4e.
+
+	GNU libtool 1.4d was released.
+
+	* configure.ac: Bumped version to 1.4d.
+	* NEWS: updated.
+	* config.guess, config.sub, texinfo.tex:  Synchronised from
+	ftp.gnu.org.
+
+Continued in ChangeLog.2001
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2003 b/ChangeLog.2003
new file mode 100644
index 0000000..edf2386
--- /dev/null
+++ b/ChangeLog.2003
@@ -0,0 +1,1306 @@
+2003-12-31  Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.sh: Infer tagged configuration for link mode with the
+	full compiler arguments available rather than only the first.
+
+2003-12-31  Alexandre Duret-Lutz  <adl@gnu.org>
+
+	* ltmain.sh: Quote $exec_cmd before it is eval'ed, so that
+	libtool --mode=execute echo '4 * 5' does not expand the `*'.
+
+2003-11-28  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4: Move things around so that "setopt NO_GLOB_SUBST"
+	to make zsh behave wrt \ escapes happens early in config.status.
+
+2003-11-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/configure.ac: Removed.
+	* configure.ac (AC_CONFIG_HEADERS): Merged from
+	libltdl/configure.ac.
+	(AC_LIB_LTDL): Ditto.
+	(AC_CONFIG_FILES): Add libltdl/Makefile.
+	(AC_CONFIG_SUBDIRS): Removed.
+	(AC_CONFIG_COMMANDS): Remove generation of libltdl/ltmain.sh.
+	* libltdl/Makefile.am (libtool): Removed references, since we now
+	share $(top_builddir)/libtool.
+	* NEWS: Updated.
+
+2003-11-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (vcl.tmp): Be careful of VPATH builds.
+
+	* Makefile.am (EXTRA_DIST): Add stamp-vcl, or we go back to a
+	double configure run from a distributed tarball :-?
+
+2003-11-26  Gary V. Vaughan  <gary@gnu.org>
+
+	Okay, the problem I am trying to solve is that when a change (say,
+	bumping the version to 1.6 for the next release) is committed, the
+	timestamp in ChangeLog is updated, but ltmain.sh and libtoolize
+	inherit the pre-commit build number from config.status.  This
+	delta notes the change in build number in the unstamped ChangeLog
+	and forces a rerun of configure etc. to roll a new ltmain.sh with
+	the correct TIMESTAMP:
+
+	* Makefile.am (stamp-vcl): We actually need a new config.status to
+	force the correct timestamp into libtoolize and ltmain.sh,
+	rerunning autoconf has no effect at all if configure.ac hasn't
+	changed.
+
+2003-11-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (stamp-vcl): New rules to force libtool and
+	libtoolize scripts to update when the TIMESTAMP changes in
+	ChangeLog, but the file modification time doesn't (e.g in cvs
+	commit).  Otherwise we'll carry on releasing tarballs with the
+	wrong version numbers in the tools!
+
+	* config/mkstamp: Change output format to ` $rev $date'.
+	* configure.ac: Make the banner more like suggestions in
+	http://www.gnu.org/prep/standards_toc.html Section 4.6.
+	* libtoolize.in: Make --version output conform to the GNU
+	standard.
+	* ltmain.in: Ditto. And tweak the generated file headers to
+	match.
+
+2003-11-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (config.status): Removed.  Rebuilding config.status
+	isn't enough, because the TIMESTAMP in configure is still out
+	of date.
+	(configure): We actually need a new configure to force the
+	correct timestamp into ltmain.sh.
+
+	* Makefile.am (config/ltmain.sh): Removed.  Rebuilding ltmain.sh
+	isn't enough, because the TIMESTAMP in config.status is still out
+	of date.
+	(config.status): We actually need a new config.status to force the
+	correct timestamp into ltmain.sh.
+
+	* Makefile.am (config/ltmain.sh): Note the dependency on the
+	timestamp in ChangeLog so we don't ship libtools that report the
+	wrong version number :-/
+
+	* bootstrap: Explain automake and autoconf version dependencies
+	truthfully, and the difference between bootstrap and user
+	dependencies.
+	* configure.ac (AM_INIT_AUTOMAKE): List AUTOMAKE_OPTIONS here.
+	* Makefile.am, doc/Makefile.am, tests/Makefile.am
+	(AUTOMAKE_OPTIONS): Removed from here.
+
+2003-11-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/defs (func_configure): cdemo, demo and mdemo are shows
+	signs of indeterminacy for some users.  Be more verbose during
+	failure to help track down the cause.
+
+2003-11-22  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in: Check for module_cmds if max_cmd_len is exceeded too.
+
+	* ltmain.in: Move eval to after command separation to allow ~ in paths.
+
+	* tests/demo-hardcode.test: Call ./libtool not libtool.
+
+	* ltmain.in: Test $old_striplib before using it, not $striplib.
+
+2003-11-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.ac (LASTRELEASE): Calculate it as best as we can from
+	AC_PACKAGE_VERSION.
+	* Makefile.am (distdir): Remove dependency on timestamps so that
+	it is possible to roll a dist without contacting the cvs server.
+	Use `make cvs-release' for that.
+	(cvs-news): Extracted from cvs-dist.
+	(cvs-dist): Depend on cvs-news.
+	(CHECK_LASTRELEASE): Check LASTRELEASE has been set.
+	(prev-tarball): New rule.  Use LASTRELEASE to make sure the
+	previous release tarball is present.
+	(cvs-diff): Use CHECK_LASTRELEASE.
+	(xdelta): Ditto.
+	(cvs-release): Depend on prev-tarball, timestamps, cvs-news and
+	fetch. Provided you set LASTRELEASE appropriately, making a full
+	cvs release is just a matter of `make cvs-release', and submitting
+	the files to ftp-upload.
+
+2003-11-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_PROG_LTMAIN): Ensure config.status has a
+	value for `ac_aux_dir' when automake is not used.
+	Reported by Patrick Welche <prlw1@newn.cam.ac.uk>.
+
+	* configure.ac (AC_PREREQ): AS_HELP_STRING was introduced after
+	autoconf-2.57 was released.
+
+2003-11-18  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_dlhandle_find): New function to find a handle
+	by module name.
+	* libltdl/ltdl.h (lt_dlhandle_find): Declare it.
+	* doc/libtool.texi (User defined module data): Document it.
+	* NEWS: Updated.
+
+2003-11-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (AC_LIBTOOL_SETUP): Uncomment call to
+	_LT_CONFIG_COMMANDS.
+	(_LT_AC_TAG_CONFIG, AC_LIBTOOL_CONFIG): Accumulate tag generation
+	for `config.status' using _LT_CONFIG_SAVE_COMMANDS.  Remove
+	AC_MSG_NOTICE noise now that libtool is generated by a single
+	config.status tag.
+	* Makefile.am (libtool): Specify CONFIG_COMMANDS properly now that
+	libtool is generated in one pass.
+
+	* configure.ac (CONF_SUBDIRS): Make these relative to
+	tests/Makefile.am.
+	(DIST_MAKEFILE_LIST): Adjust to compensate for having removed the
+	`tests/' part in CONF_SUBDIRS.
+	* tests/Makefile.am (DIST_SUBDIRS): Distribute these directories.
+	(SUBDIRS): Set to `.', a NOP, to workaround an automake bug which
+	ignores DIST_SUBDIRS unless SUBDIRS is also set.
+	* Makefile.am (DIST_SUBDIRS): Don't try to distribute the tests
+	subdirectories from here, since the recursive automake dist rule
+	only works with direct child directories.  Defer to
+	tests/Makefile.am in this case.
+
+2003-11-15  Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.in: In compile mode, delay parsing of -shared, -static,
+	-prefer-pic and -prefer-non-pic until after tagged configuration
+	has been read.  In link mode, read tagged configuration before
+	parsing any arguments.  These arguments will now work when using
+	a non-C compiler.
+
+2003-11-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Mention AC_LIBTOOL_TAGS.
+
+	* Makefile.am (EXTRA_DIST): List ChangeLog files correctly.
+
+	* tests/cdemo/configure.ac, tests/demo/configure.ac,
+	tests/depdemo/configure.ac, tests/f77demo/configure.ac,
+	tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
+	tests/pdemo/configure.ac, tests/tagdemo/configure.ac: Declare just
+	the tags we need using AC_LIBTOOL_TAGS, reducing the size of the
+	configure script by 50% in most cases.
+
+2003-11-14  Marius Vollmer  <mvo@zagadka.de>
+
+	* doc/libtool.texi (Libltdl interface): libltdl does in fact load
+	dependency libs for lt_dlopen()ed modules.
+
+2003-11-14  Gary V. Vaughan  <gary@gnu.org>
+
+	Run our configure.ac files through Autoconf 2.59's autoupdate, and
+	then tweak the results by hand:
+
+	* m4/libtool.m4 (AC_PROG_LD): In common with all the other
+	AC_PROG_ macros, AC_SUBST the discovered LD.
+	(AC_PROG_NM): Similarly for NM.
+	(LT_AC_PROG_SED): Similarly for SED.
+	* configure.ac: No need to SUBST NM and LD manually any more.
+	(AC_PREREQ): Conservatively downgrade from 2.59 to 2.54.
+	* tests/cdemo/configure.ac, tests/demo/configure.ac,
+	tests/depdemo/configure.ac, tests/f77demo/configure.ac,
+	tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
+	tests/pdemo/configure.ac, tests/tagdemo/configure.ac: Ditto.
+	* m4/libtool.m4 (AM_PROG_LIBTOOL, AM_ENABLE_SHARED,
+	AM_ENABLE_STATIC, AM_DISABLE_SHARED, AM_DISABLE_STATIC,
+	AM_PROG_LD, AM_PROG_NM): AU_DEFUN these macros so autoupdate can
+	use the newer definitions.
+
+2003-11-12  Gary V. Vaughan  <gary@gnu.org>
+
+	The rules for uploading releases to gnu.org have been updated, and
+	are in fact now rather complicated.  This delta updates the
+	release instructions to the describe the new process, and updates
+	the maintainer rules to help automate many of the steps:
+
+	* README-alpha: Updated release instructions.
+	* Makefile.am (GPG): Name of the program for generating signatures
+	for files to be uploaded.
+	(XDELTA, XDELTA_OPTIONS): Invocation of xdelta.
+	(cvs-dist): Run distcheck before tagging the cvs tree incase
+	distcheck fails, and then generate the gpg signature files.
+	(cvs-diff): Generate the gpg signature files for the diff.
+	(xdelta): New rule for generating the xdelta diffs and associated
+	gpg signature files.
+	(cvs-release): New rule to do all of the above, if you don't mind
+	typing your gpg passphrase over and over again. :-)
+	(fetch): New rule inspired by automakes similar rule for updating
+	files maintained outside the project.
+	* config/config.guess, config/config.sub: Updated with the new
+	fetch rule.
+
+2003-11-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_dlinit): Save a function call for each loader
+	added to the list, in exchange for appending loaders to the list
+	with O(N) rather than O(1).  The longest the loader list can ever
+	get is 4 (on cygwin with dld installed) so it probably constitutes
+	a small speedup, in addition to making the code much more readable.
+
+	* m4/libtool.m4 (AC_LIBTOOL_SETUP): Don't define the value for
+	ltmain unconditionally.
+	(_LT_PROG_LTMAIN): New macro to ensure that the
+	shell variable `ltmain' actually points at a suitable `ltmain.sh'.
+	(_AC_PROG_LIBTOOL): Require it.
+	(AC_LIBTOOL_CONFIG, _LT_AC_TAG_CONFIG): Invoke it.
+	* Makefile.am (libtool): ltmain.sh is in the build tree.
+	* libltdl/configure.ac: Ditto.
+
+2003-11-10  Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.in: Add -pthread and similar to $deplibs ($compile_deplibs
+	and $finalize_deplibs for programs) when found on the command line
+	or in a .la file's dependency_libs (but don't place them there) so
+	they are honoured when linking both programs and libraries.
+
+2003-11-10  Scott James Remnant  <scott@netsplit.com>
+
+	* m4/libtool.m4  (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [linux]: Include
+	directories found in /etc/ld.so.conf in sys_lib_dlsearch_path_spec.
+
+2003-11-09  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in (linkalldeplibs,darwin): Fix a bug reported by Idar
+	Tollefsen where a dir could be added to the link line with no '-L'
+	on darwin.
+
+2003-11-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/cdemo/configure.ac, tests/demo/configure.ac,
+	tests/depdemo/configure.ac, tests/f77demo/configure.ac,
+	tests/mdemo/configure.ac, tests/mdemo2/configure.ac,
+	tests/pdemo/configure.ac, tests/tagdemo/configure.ac:
+	s/AM_PROG_LIBTOOL/AC_PROG_LIBTOOL/. Marching boldly into the 21th
+	century :-$
+
+	* m4/libtool.m4 (AC_LIBTOOL_TAGS, AC_ENABLE_SHARED,
+	AC_DISABLE_SHARED, AC_ENABLE_STATIC, AC_DISABLE_STATIC,
+	AC_ENABLE_FAST_INSTALL, AC_DISABLE_FAST_INSTALL, AM_PROG_LIBTOOL,
+	AM_ENABLE_SHARED, AM_ENABLE_STATIC, AM_DISABLE_SHARED,
+	AM_DISABLE_STATIC): These macros must be AC_DEFUNed after all,
+	otherwise aclocal can't find them when it tries to construct
+	`aclocal.m4'.
+
+	* Makefile.am (install-data-local): Wipe out old installation
+	pkgdatadir before installing new files.
+	* NEWS: Updated.
+
+	* libtoolize.in (func_scan_files): If libtoolize is run before
+	automake has created install-sh and configure.ac does not mention
+	AC_CONFIG_AUX_DIR, fall back to the current directory for auxdir.
+
+2003-11-07  Robert Millan  <zeratul2@wanadoo.es>
+
+	* m4/libtool.m4 (AC_DEPLIBS_CHECK_METHOD) [GNU/KNetBSD]: Detect
+	inter-library dependencies.
+
+2003-11-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_AC_FILE_LTDLL_C): Removed; no longer in use.
+
+	* m4/libtool.m4: s/ifelse(/m4_if(/g
+	(_LT_AC_SYS_LIBPATH_AIX, _LT_AC_SHELL_INIT,
+	_LT_AC_PROG_ECHO_BACKSLASH, AC_LIBTOOL_LINKER_OPTION,
+	AC_LIBTOOL_TAGS, _LT_AC_TAG_CHECK, _LT_AC_TAG_CONFIG,
+	AC_ENABLE_SHARED, AC_DISABLE_SHARED, AC_ENABLE_STATIC,
+	AC_DISABLE_STATIC, AC_ENABLE_FAST_INSTALL,
+	AC_DISABLE_FAST_INSTALL, _LT_AC_LANG_C_CONFIG,
+	_LT_AC_LANG_GCJ_CONFIG, _LT_AC_LANG_RC_CONFIG, AC_LIBTOOL_CONFIG,
+	_LT_AC_TAGVAR, AM_PROG_LIBTOOL, AM_ENABLE_SHARED,
+	AM_ENABLE_STATIC, AM_DISABLE_SHARED, AM_DISABLE_STATIC): Use
+	m4_define instead of AC_DEFUN for internal macros that do not
+	AC_PROVIDE or AC_REQUIRE, and documented user macros that cannot
+	be AC_REQUIREd because they need arguments, or because that would
+	violate the documented API.
+
+	* m4/libtool.m4 (AC_LIBTOOL_SETUP): Add a new
+	delay_single_quote_subst sed script to quote single quotes in
+	variables that are copied to `config.status'.
+	(_LT_CONFIG_STATUS_DECLARE): New macro to apply
+	delay_single_quote_subst to a named variable.
+	(AC_LIBTOOL_CONFIG): Use _LT_CONFIG_STATUS_DECLARE to declare all
+	`configure' variables that are copied to `config.status'.
+	(AC_LIBTOOL_PROG_COMPILER_PIC): Fix a quoting bug exposed by
+	_LT_CONFIG_STATUS_DECLARE using the null quadrigraph in the
+	rvalues of lt_prog_compiler_pic.
+
+2003-11-06  Owen Taylor  <otaylor@redhat.com>
+
+	* m4/libtool.m4 (AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE): Recognise the
+	'R' symbol type so read-only symbols can be exported when combining
+	GCC and Solaris LD.
+
+2003-11-06  James Henstridge  <james@daa.com.au>,
+	Scott James Remnant  <scott@netsplit.com>
+
+	* m4/libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [Linux]: Fix the
+	-export-symbols and -export-symbols-regex options.
+
+2003-11-06  Scott James Remnant  <scott@netsplit.com>
+
+	* tests/demo-nopic.test: Skip test on hppa, which don't like
+	non-PIC shared libraries.
+
+2003-11-06  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* tests/depdemo/configure.ac, tests/mdemo/configure.ac,
+	tests/mdemo2/configure.ac: process 'libtool --features'
+	from Makefile, not configure -- because libtool doesn't
+	exist at configure time.
+
+	* ltmain.in (find_executable, check_executable) [cygwin*, mingw*]:
+	binary wrapper used with uninstalled executables breaks when
+	invoked via execlp/execvp (that is, via $PATH).  Handle that case.
+	(fnqualify): Subsumed into find_executable.
+
+	* m4/libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [cygwin*, mingw*]:
+	when extracting symbols from an import lib (occurs if
+	--enable-shared --disable-static), the output of
+	$global_symbol_pipe is not the same as 	when extracting from a
+	static library (the default case). Add extra filters to
+	$export_symbols_cmds to process this sort of output in addition to
+	'normal' static-lib output.
+	* NEWS: Updated.
+
+2003-11-06  Charles Wilson  <cwilson@ece.gatech.edu>,
+	Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (LT_USE_POSIX_DIRENT): Factored out.
+	(LT_USE_WINDOWS_DIRENT_EMULATION): Move to after include "ltdl.h",
+	as they are affected by __WINDOWS__ definition.
+	(LT_READTEXT_MODE): Use textmode to read .la files.
+	(lt_dlinit): Use LoadLibrary loader as a fallback on cygwin.
+
+2003-11-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.h (__WINDOWS__): Define this if _WIN32 or WIN32 are
+	defined, unless __CYGWIN__ or __CYGWIN32__ are defined.
+	(LT_SCOPE): Now set without reference to __CYGWIN__ definition,
+	since __WINDOWS__ now implies !__CYGWIN__ after canonicalisation.
+	(LT_PARAMS, lt_ptr): Use canonicalised __WINDOWS__ to determine
+	which values to set these macros to.
+
+2003-11-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* README-alpha: Mention autotools-announce@gnu.org, and update release
+	note templates.
+
+2003-11-01  Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.in: When relinking, place the -L parameter containing
+	the installation prefix directory after the intended destination,
+	so we don't accidentally link against an older installed library.
+
+2003-11-01  Peter O'Gorman  <peter@pogma.com>
+
+	* tests/mdemo2/Makefile.am: Let mdemo2 find ltdl.h again.
+
+2003-10-30  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (Darwin): Fix stupidities for darwin tags support.
+	Makes it work again if AC_LIBTOOL_TAGS is specified in configure.ac.
+	Bug reported by Joe Orton and Christian Schaffner.
+
+2003-10-21  Gary V. Vaughan  <gary@gnu.org>
+
+	Start to eliminate the double run of configure in a fresh CVS
+	checkout by generating ltmain.sh, using that to create libtool,
+	and then adding the tags to that, all from config.status.
+
+	* configure.ac (AC_CONFIG_FILES): Make config/ltmain.sh, and copy
+	it to libltdl.
+	* Makefile.am ($(srcdir)/config/ltmain.sh): This file is now
+	created by config.status.  Adjust this rule.
+	(libtoolize): Set CONFIG_COMMANDS to empty to prevent regenerating
+	the libtool script as a side effect of running this rule.
+	* libtool.m4: Bump serial number.  Fix comment typos.
+	(_LT_CONFIG_LIBTOOL_INIT, _LT_CONFIG_LIBTOOL,
+	_LT_CONFIG_SAVE_COMMANDS, _LT_CONFIG_COMMANDS: New macros.  They
+	don't work for some reason - the variable value quoting in the
+	init section is all wrong.  Not used at the moment.
+	(AC_LIBTOOL_CONFIG): Generate libtool from config.status.
+	(_LT_AC_TAG_CONFIG): Add the tags in config.status.
+	(compiler_DEFAULT): Save the compiler value for the DEFAULT tag,
+	or it gets overwritten by the other macros.
+	(EOF): Globally replace with _LT_EOF to avoid namespace pollution.
+	* tests/demo/configure.ac (STATIC): Check $enable_static instead
+	of running ./libtool which doesn't exist yet.
+	(BINARY_HELLDL): Check $lt_cv_sys_global_symbol_pipe with case
+	instead of grepping ./libtool which doesn't exist yet.
+	* tests/pdemo/configure.ac (STATIC, BINARY_HELLDL): Ditto.
+	* doc/libtool.texi (AC_PROG_LIBTOOL): Add some notes about trying
+	to get config details from `libtool --config'.
+	* NEWS: Updated.
+
+2003-10-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* ChangeLog, ChangeLog.0, ChangeLog.1: Refactored...
+	* ChangeLog, ChangeLog.2002, ChangeLog.2001, ChangeLog.2000,
+	ChangeLog.1999, ChangeLog.1998, ChangeLog.1997, ChangeLog.1996:
+	...into entries by year for easier copyright confirmation.
+
+	* configure.ac, libltdl/configure.ac, tests/cdemo/configure.ac,
+	tests/demo/configure.ac, tests/depdemo/configure.ac,
+	tests/f77demo/configure.ac, tests/mdemo/configure.ac,
+	tests/mdemo2/configure.ac, tests/pdemo/configure.ac,
+	tests/tagdemo/configure.ac (AM_INIT_AUTOMAKE): Remove redundant
+	arguments.
+	* libltdl/configure.ac: Use quadrigraphs to escape macronames.
+
+	* bootstrap (reconfdirs): Same as yesterday, only with portable
+	bourne shell syntax.  :-/
+
+2003-10-20  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap (reconfdirs): Overridable top dirs for bootstrap, for
+	those times when you don't want to wait for all of the test
+	directories to be rebootstrapped!
+
+2003-10-19  Kevin P. Fleming  <kpfleming@backtobasicsmgmt.com>
+	Charles Wilson <cygwin@cwilson.fastmail.fm>
+
+	* ltmain.in: include --tag options, if specified, in the
+	relink_command in uninstalled .la files.  Also, preserve --silent,
+	--debug options when libtool re-execs itself.
+	* NEWS: Updated.
+
+2003-10-19  Charles Wilson  <cygwin@cwilson.fastmail.fm>
+
+	* libtoolize.in: protect sed expression against
+	AC_CONFIG_AUX_DIR_DEFAULT.
+
+2003-10-16  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* m4/libtool.m4 (AC_DEPLIBS_CHECK_METHOD): For MinGW, reverted DLL
+	check method back to a working objdump-based test.  This is not as
+	concrete a test as using the 'file' command, but it does not
+	require that the 'file' command be available.
+
+2003-10-15  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* doc/libtool.texi (AC_LIBTOOL_TAGS): Incorporate documentation
+	for AC_LIBTOOL_TAGS macro to specifify libtool tags. The now
+	defunct --with-tags option was never documented.
+
+2003-10-15  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* m4/libtool.m4: Restrict the list of tags that can be created
+	with a new AC_LIBTOOL_TAGS([tag1 tag2 ...]) macro. Deprecate
+	--with-tags.
+
+2003-10-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in: Typo when copying config.sub.
+	From Patrick Welche <prlw1@newn.cam.ac.uk>
+
+	* demo/Makefile.am (libhell0_a_SOURCES): Do not name sources
+	already built with libtool...
+	(libhell0_a_LIBADD): ...instead name the objects directly.  This
+	prevents a long standing warning from automake 1.7+.
+	* pdemo/Makefile.am (libhell0_a_SOURCES, libhell0_a_LIBADD):
+	Ditto.
+
+	* bootstrap: Make the fake files valid shell scripts with a
+	comment incase they get left around.
+	(LIBTOOLIZE): Use a dummy script to prevent the installed
+	`libtoolize' from trashing the distributed libtool.m4,
+	config.guess and config.sub.
+
+	* configure.ac (AC_CONFIG_TESTDIR, AC_CONFIG_TESTFILES): Comment
+	this out for now, the autotest testsuite rewrite is not ready
+	yet.
+
+	* tests/cdemo/Makefile.am, tests/demo/Makefile.am,
+	tests/depdemo/Makefile.am, tests/f77demo/Makefile.am,
+	tests/mdemo/Makefile.am, tests/mdemo2/Makefile.am,
+	tests/pdemo/Makefile.am, tests/tagdemo/Makefile.am (top_distdir):
+	Removed. `autoreconf' needs literals in ACLOCAL_AMFLAGS.
+
+2003-10-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in (func_mkdir_p): Synch with tests/defs; if there
+	are no more directories in the stack, break out of the loop.
+
+	* tests/Makefile.am (COMMON_TESTS): Remove pdemo-unst.test, which
+	isn't a real test.
+
+2003-10-14  Gary V. Vaughan  <gary@gnu.org>
+
+	Refactor all the test case common code into shell functions in
+	tests/defs, and move the various demo directories out of
+	$top_srcdir, and into tests too.  The refactoring showed up a
+	number of inconsistencies and latent bugs, as well as fixing (I
+	think!!) the long-standing annoyance with some of the tests giving
+	spurious failures intermittently.  While I was here, emacs kindly
+	removed a lot of bogus whitespace and added copyright notices for
+	us:
+
+	* cdemo, demo, depdemo, f77demo, mdemo, mdemo2, pdemo, tagdemo:
+	Moved from here...
+	* tests/cdemo, tests/demo, tests/depdemo, tests/f77demo,
+	tests/mdemo, tests/mdemo2, tests/pdemo, tests/tagdemo: ...to
+	here.
+	* tests/defs: Factor much common functionality from the test
+	scripts into shell functions.  Added a copyright notice.
+	* tests/assign.test, tests/cdemo-conf.test, tests/cdemo-exec.test,
+	tests/cdemo-make.test, tests/cdemo-shared.test,
+	tests/cdemo-static.test, tests/demo-conf.test,
+	tests/demo-deplibs.test, tests/demo-exec.test,
+	tests/demo-inst.test, tests/demo-make.test,
+	tests/demo-nofast.test, tests/demo-nopic.test,
+	tests/demo-pic.test, tests/demo-shared.test,
+	tests/demo-static.test, tests/demo-unst.test,
+	tests/depdemo-conf.test, tests/depdemo-exec.test,
+	tests/depdemo-inst.test, tests/depdemo-make.test,
+	tests/depdemo-nofast.test, tests/depdemo-shared.test,
+	tests/depdemo-static.test, tests/depdemo-unst.test,
+	tests/f77demo-conf.test, tests/f77demo-exec.test,
+	tests/f77demo-make.test, tests/f77demo-shared.test,
+	tests/f77demo-static.test, tests/link-2.test, tests/link.test,
+	tests/mdemo-conf.test, tests/mdemo-exec.test,
+	tests/mdemo-inst.test, tests/mdemo-make.test,
+	tests/mdemo-shared.test, tests/mdemo-static.test,
+	tests/mdemo-unst.test, tests/mdemo2-conf.test,
+	tests/mdemo2-exec.test, tests/mdemo2-make.test, tests/nomode.test,
+	tests/pdemo-conf.test, tests/pdemo-exec.test,
+	tests/pdemo-inst.test, tests/pdemo-make.test,
+	tests/pdemo-unst.test, tests/quote.test, tests/sh.test,
+	tests/suffix.test, tests/tagdemo-conf.test,
+	tests/tagdemo-exec.test, tests/tagdemo-make.test,
+	tests/tagdemo-shared.test, tests/tagdemo-static.test: Refactored
+	to use new functions in tests/defs.  Added a copyright notice.
+	* tests/hardcode.test, noinst-link.test,
+	tests/relink.test, tests/relink.test,
+	tests/mdryrun.test: Ditto.  Moved from here...
+	* tests/demo-hardcode.test, demo-noinst-link.test,
+	tests/demo-relink.test, tests/depdemo-relink.test,
+	tests/mdemo-dryrun.test: ...to here respectively.
+	* Makefile.am: Added a copyright notice.
+	* tests/sh.test: Check libtoolize.in for non-portabilities too.
+	* libtoolize.in: Fix non-portabilities found by tests/sh.test.
+
+2003-10-12  Peter O'Gorman <peter@pogma.com>
+
+	* m4/libtool.m4: Speed up max_cmd_len check.
+
+2003-10-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in: AC_CONFIG_M4_DIR has landed in CVS autoconf.
+	Only it's called AC_CONFIG_MACRO_DIR.  Search and replace.
+	Grumble. ;-)
+
+2003-10-08  Scott James Remnant  <scott@netsplit.com>
+
+	* libltdl/ltdl.c (lt_dlerror): change return value when
+	no error has occured to NULL to match documentation.
+	(Debian Bug #157229)
+
+2003-10-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in: Don't suppress output of PIC mode compile if
+	-no-suppress option is given.
+	* doc/libtool.texi (Invoking libtool): Document it.
+	* NEWS: Updated.
+
+2003-10-07  Marcus Comstedt  <marcus@mc.pp.se>
+
+	* m4/libtool.m4 [amigaos-ppc, amigaos-m68k]: Differentiate between
+	amigaos on ppc and m68k.
+	* NEWS: Updated.
+
+2003-10-07  Ralph Schleicher  <rs@nunatak.allgaeu.org>
+
+	* ltmain.in: Do not create `.o' objects when `-shared' is
+	specified in compile mode.
+	Do not make a static library when `-shared' is specified in link
+	mode.
+	* doc/libtool.texi (Compile mode): Document it.
+	* NEWS: Updated.
+
+	* doc/libtool.texi (Compile mode): Be more specific about the
+	effect of `-static'.
+	* ltmain.in: Do not create `.lo' objects when `-static' is
+	specified.
+	* NEWS: Updated.
+
+2003-10-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (Invoking libtool): Updated.
+	* ltmain.in: Add missing clean and finish modes to the shorthand
+	options.
+
+	* ltmain.in: Typo in the --mode shorthand.
+
+2003-10-07  Scott James Remnant  <scott@netsplit.com>
+
+	* m4/libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Remove dead code
+	for platforms that have been using pass_all for some time now.
+
+2003-10-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in: Completely rewritten.
+	* Makefile.am (AUTOMAKE_OPTIONS): Reduced to 1.7.  The 1.8
+	requirement just made the distribution much smaller due to
+	m4_includes.  1.7 will bootstrap libtool just fine.
+	* NEWS: Updated.
+
+2003-10-05  Peter O'Gorman <peter@pogma.com>,
+	Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in: Remove inferrence of mode, add shorthand for mode
+	choice.
+
+	* ltmain.in: Specifying -allow-undefined is now an error.
+
+2003-09-29  Scott James Remnant  <scott@netsplit.com>
+
+	* m4/libtool.m4 (AC_DEPLIBS_CHECK_METHOD): Use pass_all for linux*
+	solving many build problems on ARM, and hopefully preventing any
+	future ones.
+	(Debian Bug #191133 and #190569)
+
+2003-09-29  Bob Friesenhahn <bfriesen@simple.dallas.tx.us>,
+	Dalibor Topic <robilad@kaffe.org>
+
+	* libltdl/ltdl.c: Only include malloc.h if stdlib.h can not be
+	found.
+
+2003-09-26  Alfred M. Szmidt  <ams@kemisten.nu>
+
+	* mdemo2/Makefile.am (INCLUDES): Include `$(top_srcdir)/../libltdl'
+	instead of `../libltdl'.
+
+2003-09-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Rewritten to use autoreconf.
+	* config.guess, config.sub, mkstamp:  Moved from here...
+	* config/config.guess, config/config.sub, config/mkstamp: ...to
+	here, respectively.
+	* libtool.m4, ltdl.m4: Moved from here...
+	* m4/libtool.m4, m4/ltdl.m4: ...to here, respectively.
+	* configure.ac: Removed various acinclude.m4 hackery, as these
+	files are no longer needed with automake 1.8.
+	* Makefile.am: Removed various acinclude.m4 hackery, as these
+	files are no longer needed with automake 1.8.
+	(AUTOMAKE_OPTIONS): Require CVS automake.
+	(CONF_SUBDIRS, CFLAGS, CPPFLAGS, LDFLAGS, LIBS, FFLAGS, FLIBS):
+	Automake now makes a Make variable from every AC_SUBST, so these
+	are NOP.
+	(aclocal_macros): These files are now in their own m4 subdir.
+	Changed all clients.
+	(EXTRA_DIST): mkstamp has moved to the new config subdir.  Changed
+	all clients.
+	(pkgdata_SCRIPTS): Ditto wrt config.guess and config.sub.
+	(pkgdata_DATA): Ditto wrt ltmain.sh.
+	* f77demo/configure.ac, libltdl/configure.ac (AM_CONFIG_HEADER):
+	Is deprecated in favour of AC_CONFIG_HEADERS.  Updated to the
+	latter.
+	* Makefile.am, cdemo/Makefile.am, demo/Makefile.am,
+	depdemo/Makefile.am, f77demo/Makefile.am, mdemo/Makefile.am,
+	mdemo2/Makefile.am, pdemo/Makefile.am, tagdemo/Makefile.am
+	(EXTRA_DIST): Remove acinclude.m4.
+	(ACLOCAL_AMFLAGS): Search new `m4' macro directory.
+	* configure.ac, cdemo/configure.ac, demo/configure.ac,
+	depdemo/configure.ac, f77demo/configure.ac, mdemo/configure.ac,
+	mdemo2/configure.ac, pdemo/configure.ac, tagdemo/configure.ac
+	(AC_CONFIG_AUX_DIR): Declare that config helper	scripts are now
+	kept in the new config subdir.
+	* libltdl/configure.ac (AC_CONFIG_AUX_DIR): Removed.  Defaults to
+	`.' anyway.
+
+2003-09-21  Robert Millan  <robertmh@gnu.org>
+
+	* libtool.m4: Add GNU/KNetBSD support.
+	* ltdl.m4: Likewise.
+
+2003-09-13  Scott James Remnant  <scott@netsplit.com>
+
+	* libtool.m4: allow STRIP to contain spaces and additional
+	arguments.  (Debian Bug #183055)
+	* ltmain.in: include newline in "sensible default" for IFS.
+	(Debian Bug #98492 and #95447)
+
+2003-09-11  Peter O'Gorman  <peter@pogma.com>
+
+	* AUTHORS, THANKS: Added myself to AUTHORS, removed from THANKS.
+
+2003-09-10  Peter O'Gorman  <peter@pogma.com>
+
+	* mdemo2/configure.ac: Use AC_LIBTOOL_DLOPEN.
+	* mdemo2/main.c: Use LTDL_SET_PRELOADED_SYMBOLS().
+	* mdemo2/Makefile.am: Set INCLUDES properly and add -dlopen force
+	to make sure the symbols file is included in the link line.
+
+	* ltmain.in: Accept -framework for darwin and put it in
+	dependency_libs. For non-installed .la's try to avoid having
+	./.libs/.libs/libfoo.so on the link line.
+
+2003-09-10  Arne Woerner  <woerner@mediabase-gmbh.de>
+
+	* libtool.m4 [openbsd]: openbsd 3.x needs versioning information.
+
+2003-08-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Typo.
+
+2003-08-29  Alexandre Duret-Lutz  <adl@gnu.org>
+
+	* libtool.m4 (_LT_AC_LANG_C_CONFIG): Fix unquoted call to
+	_LT_AC_LANG_C_CONFIG.
+	(AC_PROG_EGREP): Remove, now that Libtool requires Autoconf 2.56.
+	* bootstrap: Issue an upgrade warning.
+
+2003-08-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (_LT_AC_CHECK_DLFCN): Use the interrim new
+	AC_CHECK_HEADER with compiler rather than preprocessor.
+	(AC_LIBTOOL_SETUP): ...which was introduced in autoconf-2.56, so
+	we AC_PREREQ that version.
+	* ltdl.m4 (AC_WITH_LTDL, AC_LIB_LTDL, AC_LTDL_FUNC_ARGZ): Ditto.
+
+2003-08-27  Gary V. Vaughan  <gary@gnu.org>
+
+	Work around a bug in AU_ALIAS in CVS Autoconf that inserts a
+	newline just before AC_FD_CC, by hand updating:
+
+	* ltdl.m4 (AC_LTDL_SYMBOL_USCORE): s/AC_FD_CC/AS_MESSAGE_LOG_FD/g.
+
+2003-08-05  Jim Pick <jim@kaffe.org>,
+	Ito Kazumitsu <kaz@maczuka.gcd.org>,
+	Gary V. Vaughan  <gary@gnu.org>
+
+	Much as we have tried not to make it the callers' responsibility
+	to maintain an lt_dlrealloc function pointer, it is too difficult
+	to implement realloc as malloc/memcpy/free without knowing the
+	size of the original block.  rpl_realloc has been deprecated since
+	2002-10-30, but kaffe has real failures with that so it's time to
+	bite the bullet.  Caller gets to maintain lt_dlrealloc:
+
+	* NEWS (1.5.1): Updated.
+	* libltdl/ltdl.c (LT_DLREALLOC): Use lt_dlrealloc so the user can
+	update the function pointer to match lt_dlmalloc.
+	(lt_emalloc): Use lt_dlrealloc rather than hardcoding realloc.
+	* doc/libtool.texi (Libltdl interface): Describe lt_dlrealloc now
+	that it too has become part of the exported interface to libltdl.
+
+2003-08-01  Peter O'Gorman  <peter@pogma.com>
+
+	* libtool.m4 (darwin): Use "-undefined dynamic_lookup" if the
+	user set MACOSX_DEPLOYMENT_TARGET to 10.3 or greater.
+	* libltdl/ltdl.c (dyld): Save the error from the first lookup
+	to report in lt_dlerror(). Otherwise the error is always
+	"Symbol _foo not in /usr/lib/libSystem.dylib".
+	Thanks to Chris Zubrzycki for reporting this.
+
+2003-08-01  Robert Boehne  <rboehne@gnu.org>
+
+	* libltdl/ltdl.h: Tweak the header to support visual studio.
+
+2003-07-31  Greg Eisenhauer  <eisen@cc.gatech.edu>
+
+	* ltmain.in: Provide absolute paths for dlopen and dlpreopen
+	files in generating uninstalled libtool libraries.
+	* mdemo2/main.c, mdemo2/Makefile.am, mdemo2/README,
+	mdemo2/configure.ac, mdemo2/.cvsignore, mdemo/mlib.c,
+	tests/mdemo2-conf.test, tests/mdemo2-exec.test,
+	tests/mdemo2-make.test: New files for testing above feature.
+	* configure.ac, bootstrap, tests/Makefile.am: Accomodate new
+	test directory.
+	* mdemo/Makefile.am: Build libmlib.la for mdemo2 tests.
+
+2003-07-30  Tony Wyatt <wyattaw@optushome.com.au>
+
+	* libtool.m4: Remove parentheses around finish_eval part which
+	broke on amigaos pdksh.
+
+2003-07-30  Christiaan Welvaart  <cjw@daneel.dyndns.org>
+
+	* tests/dryrun.test: Ignore any 'total' line from "ls -l" output.
+
+2003-07-30  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_CC_C_O): Correctly remove IRIX C++
+	template files.
+
+2003-07-24  Robert Millan  <robertmh@gnu.org>
+
+	* libtool.m4: More fixes for the new GNU/FreeBSD triplet.
+
+2003-07-14  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* config.guess, config.sub: Synchronized from ftp.gnu.org since
+	Robert Millan's patch requires it.
+
+2003-07-14  Robert Millan  <zeratul2@wanadoo.es>
+
+	* libtool.m4: Fixed to use the new GNU/FreeBSD triplet.
+	* ltdl.m4: Fixed to use the new GNU/FreeBSD triplet.
+	* ltmain.in: Remove GNU/FreeBSD cases, which are no longer needed.
+
+2003-07-14  Andreas Schwab  <schwab@suse.de>
+
+	* libtool.m4 (_LT_AC_LOCK): Also match powerpc64-*linux* in
+	addition to ppc64-*linux*.  From Markus Meissner
+	<meissner@bogus.example.com>.
+
+2003-07-14  Dalibor Topic  <robilad@yahoo.com>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): For AmigaOS with pdksh,
+	set the maximum command line length to 8K since otherwise the test
+	takes over an hour to run.
+
+2003-06-25  Alexandre Oliva  <aoliva@redhat.com>, Tim Waugh  <twaugh@redhat.com>
+
+	* libtool.m4: Replace mis-uses of path with pathname.
+	(AC_PROG_LD_GNU): Don't quote $LD when running it.
+	(_LT_AC_LANG_CXX_CONFIG): Use -nostdlib also when linking with g++
+	and non-GNU ld.
+
+2003-06-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_COMPILER_OPTION): Require LT_AC_PROG_SED to
+	ensure $SED is set by the time it is used.
+
+	* ChangeLog: Restore missing entries from 2003-04-22.
+
+	* NEWS: Sychronised from branch-1-5.
+
+2003-06-03  Benjamin Reed  <ranger@befunk.com>
+
+	* ltmain.in: search libraries in the order of preference, rather
+	than picking .la's even if they're in a less preferred directory.
+
+2003-06-03  Robert Millan <rmh@debian.org>
+
+	* ltdl.m4: Add support for GNU/FreeBSD.
+	* ltmain.in: Add support for GNU/FreeBSD.
+
+2003-06-03  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: No need to use sed to remove leading comma when
+	appending to $tagnames.
+
+2003-06-03  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* tests/defs, tests/demo-conf.test, tests/demo-nofast.test,
+	tests/demo-nopic.test, tests/demo-pic.test,
+	tests/demo-shared.test, tests/demo-static.test,
+	tests/depdemo-conf.test, tests/depdemo-nofast.test,
+	tests/depdemo-shared.test, tests/depdemo-static.test:
+	Pass build system type to tests to support environment
+	where default system type not equal to build system type
+	(eg. 64-bit HP-UX).
+
+2003-06-03  Peter O'Gorman  <peter@pogma.com>
+
+	* libtool.m4 (darwin): Remove checks for Apple-specific gcc.
+	* libltdl/ltdl.c (HAVE_MACH_O_DYLD_H): #define
+	__private_extern__ for fsf gcc.
+	* ltmain.in (darwin): Only add new paths to newlib_search_path.
+
+2003-06-03  Max Bowsher  <maxb@ukf.net>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Reorder cygwin's
+	system library search path.
+
+2003-06-01  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Match all qnx-nto
+	as recent config.guess returns a slightly different string.
+	* ltmain.in: Replace use of "od" with tr.
+
+2003-05-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (argz_insert): Corrected an off by one error when
+	checking that before is not out of range.
+
+2003-05-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_int_dyld_lib_install_name): Removed unused
+	variable mh1.
+	(sys_dyld_close): Removed unused variable size.
+
+2003-05-21  Bruno Haible  <bruno@clisp.org>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Add support for
+	GNU/FreeBSD.
+
+2003-04-22  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on all
+	mips*-linux* variants.
+
+2003-04-22  Samuel Meder  <meder@mcs.anl.gov>
+
+	* libtool.m4 Switch on $CC and add paterns to cases.
+
+2003-04-22  Peter O'Gorman  <peter@pogma.com>
+
+	* libtool.m4: Move the AC_LIBTOOL_SYS_DYNAMIC_LINKER check
+	to be before AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH, becuase the
+	value of shlibpath_overrides_runpath is used in the HARDCODE
+	test and is set in the DYNAMIC_LINKER test.
+	* ltmain.in [darwin]: We never need to relink on darwin.
+
+2003-04-22  Samuel Meder  <meder@mcs.anl.gov>
+
+	* libtool.m4: Switch on $CC and add patterns to cases.
+
+2003-04-21  Richard Dawe  <rich@phekda.freeserve.co.uk>
+
+	* doc/libtool.texi: Use @ifnottex instead of @ifinfo,
+	to allow production of HTML documentation using makeinfo.
+
+2003-04-14  Robert Boehne  <rboehne@gnu.org>
+
+	* NEWS: Updated.
+	* configure.ac: Bumped version to 1.5a.
+
+	GNU libtool 1.5 was released.
+
+	* configure.ac: Bumped version to 1.5.
+	* NEWS: updated.
+	* README-alpha: Updated upload instructions.
+	* README: Changed typo in version description.
+	* config.guess, config.sub, texinfo.tex:  Synchronized from
+	ftp.gnu.org.
+
+
+2003-04-10  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on all
+	mips*-linux* variants.
+
+2003-04-09  Samuel Meder  <meder@mcs.anl.gov>
+
+	* libtool.m4 Switch on $CC and add paterns to cases.
+
+2003-04-09  Peter O'Gorman  <peter@pogma.com>
+
+	* libtool.m4: Move the AC_LIBTOOL_SYS_DYNAMIC_LINKER check
+	to be before AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH, becuase the
+	value of shlibpath_overrides_runpath is used in the HARDCODE
+	test and is set in the DYNAMIC_LINKER test.
+	* ltmain.in(darwin): We never need to relink on darwin.
+
+2003-04-09  Samuel Meder  <meder@mcs.anl.gov>
+
+	* libtool.m4 Switch on `basename $CC` not $CC
+
+2003-04-05  Peter O'Gorman  <peter@pogma.com>
+
+	* libtool.m4: if ZSH_VERSION is set then setopt NO_GLOB_SUBST so
+	libtool works. Remove zsh echo test code, don't bother checking
+	for zsh anymore in the darwin archive_expsym_cmds.
+
+2003-04-05  Allan Sandfeld Jensen  <snowwolf@one2one-networks.com>
+
+	* libtool.m4: Switch on $CC not $cc_basename.
+
+2003-04-02  Robert Boehne  <rboehne@gnu.org>
+
+	* tests/defs: Quote $DJGPP to prevent problems with some shells.
+	Pointed out by Albert Chin <libtool@thewrittenword.com>
+
+2003-04-01  Peter O'Gorman  <peter@pogma.com>
+
+	* libtool.m4: Fix the echo test which I broke earlier.
+	* ltmain.in: Make DESTDIR work on darwin, don't use otool.
+
+2003-03-31  Keith Packard  <keithp@keithp.com>
+
+	* ltmain.in: New flag -version-number to be used for maintaining
+	compatability with a previously non-Libtool versioning scheme.
+	* doc/libtool.texi: Document it.
+
+2003-03-31  Naofumi Yasufuku  <naofumi@yasufuku.net>
+
+	* ltmain.in (win32_libid): Fixed sed expression error in
+	win32_nmres evaluation.
+
+2003-03-31  Albert Chin  <libtool@thewrittenword.com>
+
+	* ltmain.in: Don't pass -R flags found in a .la's dependency_libs
+	variable directly down to the linker.
+	Reported by Tim Mooney <mooney@dogbert.cc.ndsu.nodak.edu>.
+
+2003-03-28  Richard Dawe  <rich@phekda.freeserve.co.uk>
+
+	* Makefile.am: Define CONF_SUBDIRS.
+	* tests/defs: Set CONFIG_SITE to /nonexistent, except on DJGPP,
+	which requires its config.site, to work correctly.
+	* tests/cdemo-conf.test, tests/cdemo-shared.test,
+	tests/cdemo-static.test, tests/demo-conf.test,
+	tests/demo-nofast.test, tests/demo-nopic.test,
+	tests/demo-pic.test, tests/demo-shared.test,
+	tests/demo-static.test, tests/depdemo-conf.test,
+	tests/depdemo-nofast.test, tests/depdemo-shared.test,
+	tests/depdemo-static.test, tests/f77demo-conf.test,
+	tests/f77demo-shared.test, tests/f77demo-static.test,
+	tests/mdemo-conf.test, tests/mdemo-shared.test,
+	tests/mdemo-static.test, tests/pdemo-conf.test,
+	tests/tagdemo-conf.test, tests/tagdemo-shared.test,
+	tests/tagdemo-static.test: Don't set CONFIG_SITE, now that
+	tests/defs sets it.
+	* tests/cdemo-exec.test, tests/demo-exec.test,
+	tests/demo-inst.test, tests/depdemo-exec.test,
+	tests/depdemo-inst.test, tests/f77demo-exec.test,
+	tests/mdemo-exec.test, tests/mdemo-inst.test,
+	tests/pdemo-exec.test, tests/pdemo-inst.test,
+	tests/tagdemo-exec.test: When checking for the existence
+	of executables, use the executable file extension from $EXEEXT.
+
+2003-03-28  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/ltdl.c (dyld): Remove some debug printf's, fix a bug.
+	* ltmain.in (darwin): Only link against shared libraries when doing
+	link_all_deplibs.
+
+2003-03-25  Robert Boehne  <rboehne@gnu.org>
+
+	* bootstrap: Add f77demo to the directories that AUTOHEADER
+	is run in.
+
+2003-03-21  Wesley W. Terpstra <terpstra@ito.tu-darmstadt.de>
+
+	* ltmain.in: Don't accumulate directory information in clean mode.
+	Include properly pathed wrapper script.
+
+2003-03-21  Peter O'Gorman  <peter@pogma.com>
+
+	* README: Remove "Important" information about patching automake.
+	* configure.ac: Fix misapplied patch in last commit
+	* libtool.m4 (darwin): Check compiler is apple gcc, add -single_module
+	support so that dyloading c++ shared libraries will work.
+	* libtool.m4 (_LT_AC_TAGCONFIG): Add test -n to the tests so that
+	it will work outside of libtool.
+	* doc/PLATFORMS: Add darwin
+	* f77demo/configure.ac: Add config.h which was misapplied previously.
+
+2003-03-20  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in: Always use $echo not echo for consistency.
+	Changes for darwin building. Warn if linking against libs linked
+	with -module. Use module_cmds if available and building a module,
+	move convenience double lib check,
+	* libltdl/ltdl.c: ltdl support for darwin (first blush)
+	* libltdl/README: note that darwin is supported
+	* ltdl.m4: Changes for darwin, and for new shrext
+	* libtool.m4: Changed the way darwin builds stuff (make check passes)
+	added module_cmds, module_expsym_cmds and hardcode_automatic and put
+	them in the libtool script. check for zsh's removal of escapes. Allow
+	libraries to be stripped on darwin.
+	* TODO: Remove the todo about zsh's removal of excapes. note that zsh
+	echo works perfectly well, eval is screwed up. Seems to be fixed in
+	latest zsh.
+	* THANKS: added self :)
+	* f77demo/configure.ac: Use config.h or it doesn't work.
+
+2003-03-19  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4 (_LT_AC_TAGCONFIG): Add test around the macro that
+	adds tags to the libtool script so that they won't run when not
+	needed.
+	* configure.ac: Set F77 to no when no Fortran compiler is found.
+
+2003-03-16  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* ltmain.in (win32_libid): use $SED, not head.
+
+2003-03-02  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 (AC_PROG_LD): Use $CC instead of GCC.
+	(_LT_AC_LANG_CXX_CONFIG): Preserve variables used by AC_PROG_LD,
+	and reset them for a C++ environment.  Use the with_gnu_ld setting
+	from AC_PROG_LD.
+
+2003-02-28  Ralph Schleicher  <rs@nunatak.allgaeu.org>
+
+	* ltmain.in: Only append a dot to the wrapper script when
+	building on cygwin/MSYS (check for $build, not $host).
+
+2003-02-27  Samuel Meder  <meder@mcs.anl.gov>
+
+	* libtool.m4 (ia64): Add support for Intel compiler (ecc) on IA64
+	Linux.
+
+2003-02-27  Benjamin Reed <ranger@befunk.com>
+
+	* THANKS: Added people who have submitted 3 or more patches
+	to libtool to the THANKS file.
+	* README: Added notes about the Darwin (MacOSX) support.
+
+2003-02-25  Bob McElrath  <bob+libtool@mcelrath.org>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_COMPILER_PIC): Add support for
+	the Compaq C compiler for Alpha Linux.
+
+2003-02-25  Benjamin Reed  <ranger@befunk.com>
+
+	* libtool.m4 (darwin): Disable hardcoding library paths to
+	make relinking unnecessary.
+
+2003-02-24  Robert Boehne  <rboehne@gnu.org>
+
+	* libltdl/configure.ac: Use AC_CONFIG_AUX_DIR([.]) to place
+	auxilary files in the libltdl directory.
+	* Makefile.am: Add to the ltmain.sh rule to copy it into the
+	libltdl subdirectory.
+	* bootstrap: Explicitly handle ltmain.sh in libltdl, and pass
+	--copy to automake.
+
+2003-02-24  Ralph Schleicher  <rs@nunatak.allgaeu.org>
+
+	* libtool.m4 (AC_LIBTOOL_SETUP): Check for ar.
+
+2003-02-23  Peter O'Gorman  <peter@pogma.com>
+
+	* libtool.m4 (darwin): Revamp darwin platform support.
+	* ltdl.m4 (darwin): Support dlcompat if found.
+	* ltmain.in: Make sure ranlib is run if needed when piecewise
+	linking.
+
+2003-02-23  Alexandre Duret-Lutz  <adl@gnu.org>
+
+	* ltmain.in (--help): Show mailing-address for bug reports.
+	(--version): Mention only the most recent copyright year.
+	* libtoolize.in (--help): Show mailing-address for bug reports.
+	(--version): Mention only the most recent copyright year.
+
+2003-02-19  Alexandre Oliva  <aoliva@redhat.com>
+
+	* libtool.m4 (AC_PROG_LD): Use $CC instead of GCC.
+	(_LT_AC_LANG_CXX_CONFIG): Preserve variables used by AC_PROG_LD,
+	and reset them for a C++ environment.  Use the with_gnu_ld setting
+	from AC_PROG_LD.
+
+	* libtool.m4: Replace $linker_flags with $compiler_flags wherever
+	it is used as argument to $CC.
+
+	* libtool.m4: Use linux version_type on IRIX with GNU ld.
+	Prefix -soname, -set_version and their arguments with ${wl}.  Add
+	-melf* linker scripts to LD, and use them to determine libsuff,
+	shlibsuff and libmagic.
+
+2003-02-17  Allan Sandfeld Jensen  <snowwolf@one2one-networks.com>
+
+	* libtool.m4: Intel icc fixups for version 7.0.
+
+2003-02-17  Ralph Schleicher  <rs@nunatak.allgaeu.org>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Prepend a dot to
+	the value of the shrext (aka shared_ext) variable and delete it
+	from the library_names_spec and soname_spec definitions.  That
+	way the user can omit the shared library suffix by setting it
+	to the empty string.
+	(AC_LIBTOOL_LANG_CXX_CONFIG): Strengthen renaming commands for
+	the KCC compiler.
+	* doc/libtool.texi (Link mode): Update the manual.
+
+2003-02-17  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* ltmain.in (win32_libid): Rewritten to improve speed.
+
+2003-02-11  Richard Dawe  <rich@phekda.freeserve.co.uk>
+
+	* libtoolize.in: Use the program found by AC_PROG_LN_S
+	to create symlinks.
+
+2003-02-08  Jan Kratochvil  <project-libtool@jankratochvil.net>
+
+	* ltmain.in: Handle duplicate object file names when performing
+	piecewise archive linking by renaming object files when needed.
+
+2003-02-05  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4 (AC_CHECK_LIBM): Search for a real symbol in
+	the math library rather than 'main', it causes problems for
+	C++ compilers with certain Auto* tools.
+	(AC_LIBLTDL_INSTALLABLE): ditto.
+
+2003-02-05  Christian Cornelssen  <ccorn@cs.tu-berlin.de>
+
+	* libtool.m4 (_LT_AC_LANG_CXX_CONFIG)
+	(AC_LIBTOOL_PROG_LD_SHLIBS): Rewrite printf commands so
+	that the format string cannot be mistaken as an option.
+	Reported by Martin MOKREJS.
+
+2003-02-05  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4: Modify the sys_lib_search_path_spec to allow
+	for either native sed or GNU sed to be used.
+
+2003-02-04  Nick Hudson  <skrll@netbsd.org>
+
+	* libtool.m4: don't use -nodefaultlibs in archive_commands
+	or archive_expsym_commands on NetBSD.
+
+2003-02-04  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: Change setting of archive_cmds_need_lc
+	so that it doesn't overwrite the previous setting.
+
+2003-01-28  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: Allow compiler variable, CC, CXX, etc. to
+	be a program name with arguments. Original version stripped
+	arguments for CC.
+
+2003-01-28  Charles Wilson  <cwilson@ece.gatech.edu>
+
+	* ltmain.in: add code for a binary wrapper
+	to use with uninstalled executables on cygwin/mingw.
+	Make sure that --mode=clean gets shell wrapper and
+	binary wrapper.  When sourcing the shell wrapper,
+	invoke using a terminal `.' on cygwin/mingw to
+	avoid the automatic append-.exe behavior.
+
+2003-01-28  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4: Hardcode library paths into libraries on IRIX.
+
+2003-01-18  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_PROG_COMPILER_PIC): Don't add -DPIC
+	for languages other than C and C++.
+
+2003-01-13  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4, ltmain.in: Add support for hppa*64* based on
+	a patch by Ross Alexander <ross.alexander@uk.neceur.com>.
+	Credit to Ross! Use +b to hardcode library runtime path.
+	Add new variable, $hardcode_libdir_flag_spec_ld, that
+	is equivalent to $hardcode_libdir_flag_spec but is used
+	when ld is used for linking. This works around having to
+	set wl=''.
+
+2003-01-12  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Revert an
+	accidental rearranging of dylib and so for darwin.
+
+2003-01-10  Robert Boehne  <rboehne@gnu.org>
+
+	* libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Modify the
+	"-shrext" option so that is works properly under Darwin.
+	Modify the processing of 'gcc -print-search-dirs' under
+	Darwin to make it behave like GNU gcc does.
+	(AC_LIBTOOL_CONFIG): Single quote $shrext.
+	* ltimain.in: Expand shared_ext just before it is used
+	so that it can be conditional on the value of $module.
+
+Continued in ChangeLog.2002
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2004 b/ChangeLog.2004
new file mode 100644
index 0000000..62e52c3
--- /dev/null
+++ b/ChangeLog.2004
@@ -0,0 +1,3578 @@
+2004-12-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/getopt.m4sh (func_version, func_usage, func_help):
+	Use `$SED -n' instead of `$SED RANGE {..}; d' as AIX sed cannot
+	handle the latter.
+	(func_help): start autoconf and automake in subshells to avoid
+	error messages from ash or Bourne shell if not available.
+
+2004-12-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/general.m4sh (func_quote_for_eval): Move backslash to
+	beginning of character class, to work around old Bash bug.
+	(func_quote_for_expand): Also test to avoid unnecessary fork.
+
+2004-12-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>,
+	    Gary V. Vaughan <gary@gnu.org>
+
+	* Makefile.am, bootstrap, clcommit.m4sh, libtoolize.m4sh,
+	config/ltmain.m4sh: Replace `set --' with `set dummy [...]; shift'
+	for portability.
+	* tests/sh.test: Test for this.
+
+2004-12-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libtoolize.m4sh, config/ltmain.m4sh (most functions): New
+	variable $opt_debug is either `:' or `set -x' depending on
+	--debug.  Execute at most function entries to cater for ksh which
+	resets `-x'.
+	* tests/defs.m4sh: Ditto for VERBOSE=debug.
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS) [cygwin, mingw, pw32]:
+	_LT_TAGVAR missing for `fix_srcfile_path'.
+	[sysv4, sysv5]: _LT_TAGVAR missing for
+	`export_dynamic_flag_spec'.
+
+	* doc/libtool.texi (all over): Use @option and @command.
+	Some more minor formatting updates, typos.
+
+	* m4/libtool.m4 (_LT_PROG_ECHO_BACKSLASH): Fix variable	quoting;
+	allows lt_ECHO to match --fallback-echo again.
+
+	* config/ltmain.m4sh (func_extract_archives): Not all shells grok
+	`read -r' (unnecessary in this case).
+	Reported by Ralf Menzel <menzel@ls6.cs.uni-dortmund.de>.
+
+	* config/general.m4sh: New variable quote_scanset...
+	(func_quote_for_eval, func_quote_for_expand): ...use it to work
+	around SunOS ksh `case' backslash-escaping bug: protect character
+	class by variable expansion.
+	Reported by Alexander Kurz <alexander.kurz@qsc.de>.
+
+	* tests/quote.test: Restart under the correct shell (the one
+	$ECHO was computed for).
+
+2004-12-21  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/lt__dirent.c: Include lt__private.h.
+	* libltdl/libltdl/lt__private.h: Include lt__strl.h.
+
+2004-12-20  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh (func_extract_archives)
+	(func_extract_an_archive): On darwin, uniq can not take the flags
+	-cd together, thanks to Ralf for the fix, also ar does not accept
+	N, so we use the fact that ar x libfoo.a foo.o will always extract
+	the first foo.o in the archive and we then delete foo.o from the
+	archive, which will also delete only the first foo.o, then rinse
+	and repeat. Also add markers for the testuite.
+	* m4/libtool.m4 (_LT_CONFIG): Add a marker so that we can use a
+	sed expression to find the shell functions in libtool.
+	* tests/functests.at: Test this feature.
+	* tests/testsuite.at: Add the test.
+	* tests/Makefile.am: Add the test.
+
+2004-12-20  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libtoolize.m4sh: Install `install-sh' as well, needed for
+	configure.
+	* Makefile.am, Makefile.maint: Install, update it.
+	* NEWS, doc/libtool.texi (Distributing): Document it.
+	Reported by Ross Boylan <ross@biostat.ucsf.edu>.
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS) [solaris]: Add '${wl}-z
+	${wl}text' to archive_cmds and archive_expsyms_cmds.  I.e., do not
+	allow nopic in shared libraries.
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS) [solaris]: Change
+	no_undefined_flag back to ' -z defs'.  Problems with linking
+	against libgcc.a will have to be resolved differently.
+
+	* tests/demo-nopic.test [solaris, sunos]: Skip test.
+
+2004-12-18  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libtool.m4 [linux] (_LT_COMPILER_PIC, _LT_LANG_CXX_CONFIG):
+	Match icpc* and ecpc* (ia64 version of icpc) instead of only icpc.
+
+	* libltdl/lt__dirent.c (opendir) [mingw]: Fix write of constant
+	strings past end of buffer.
+	(opendir, readdir): Fix read past end of buffer.
+
+2004-12-17  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* HACKING: Update list of non-Libtool-owned files.
+
+2004-12-17  Akim Demaille <akim@epita.fr>
+
+	* libtoolize.m4sh (func_copy_all_from_path): Remove spurious eval.
+
+2004-12-16  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (trim): Return error rather than do bogus
+	null pointer arithmetic when parsing a malformed .la file.
+
+2004-12-13  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* libltdl/lt__strl.c, libltdl/libltdl/lt__strl.h: New files to
+	emulate strlcat and strlcpy, which support size-bounded string
+	copying and concatenation for improved security.
+	* libltdl/Makefile.am: Optionally build source files
+	libltdl/lt__strl.c and libltdl/libltdl/lt__strl.h.
+	* m4/ltdl.m4 (LTDL_INIT): Add checks for strlcat and strlcpy.
+
+2004-12-13  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG):
+	Append -G to link command-line on AIX to honor -brtl on
+	command-line (runtime linking). Already done for IBM C/C++
+	compilers.
+
+2004-12-12  Patrick Welche <prlw1@newn.cam.ac.uk>
+
+	* configure.ac: Fix aclocaldir to use ${datadir}, not ${prefix}.
+	Necessary for removal of old libtool.m4 files.
+
+2004-12-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_extract_archive): Send stderr of $NM
+	to /dev/null.
+	Reported by Martin Waitz <tali@admingilde.org>.
+
+2004-12-09  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* config/ltmain.m4sh: Preserve -model [arg] option, used
+	with the Tru64 UNIX C++ compiler. This option selects the
+	layout of C++ classes, name mangling, and exception handling.
+
+2004-12-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_finish) [solaris]: Fix [] escaping
+	bug.
+
+	* config/ltmain.m4sh (all over the map): Make use of func_basename
+	and func_dirname in most occasions.
+
+	* m4/libtool.m4 (_LT_CHECK_XSI_SHELL, _LT_PROG_XSI_SHELLFNS): New
+	macros to detect at `configure' time whether the shell supports
+	some XSI extensions and to copy appropriate versions of new shell
+	functions into `libtool' through `config.status'.  Copied
+	functions are Bourne and XSI variants of func_basename,
+	func_dirname (a variant of `dirname' suitable for libtool).
+	(_LT_SETUP): Require _LT_CHECK_XSI_SHELL.
+	(_LT_CONFIG):  Use _LT_PROG_XSI_SHELLFNS to insert into `libtool'
+	at marker.
+
+	* config/ltmain.m4sh: Set marker for insertion of shell functions.
+
+	* config/general.m4sh (func_quote_for_eval): Only fork if the
+	substitution matches.
+
+2004-12-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* TODO: Paste Peter's summary of the TODO thread starting at
+	http://lists.gnu.org/archive/html/libtool/2004-11/msg00130.html.
+
+2004-12-02  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* config/ltmain.m4sh: Remove code which is no longer needed
+	now that temp_rpath only contains fully-qualified elements.
+
+2004-11-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/general.m4sh: basename sed-subst is anchored and thus
+	does not need the `g' flag.
+	(func_quote_for_eval): Return both the possibly double-quoted
+	backslashified as well as only the backslashified argument.
+	* config/ltmain.m4sh (func_mode_link): Use both return values,
+	to save another sed_quote_subst application per cmdline arg.
+
+2004-11-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_lalib_p): Update function
+	description.
+	(func_lalib_unsafe_p): New function with same functionality but
+	written without forks; this function is safe to use for cases
+	where the argument either does not exist or is required to be a
+	lalib for correct operation.
+	* NEWS: Mention the fact that stdin is not to be used.
+	* config/ltmain.m4sh (func_mode_execute, func_mode_install)
+	(func_mode_link): Use func_lalib_unsafe_p where appropriate.
+	(func_mode_execute): For the program wrapper, use
+	func_ltwrapper_p instead of func_lalib_p.
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS): Treat linux-dietlibc with
+	the `diet' compiler wrapper (as opposed to the `diet-dyn' wrapper)
+	as a static-only platform.
+	* NEWS: Updated.
+
+	* libltdl/ltdl.c (trim): Use memcpy instead of strncpy here, to
+	avoid problems with non-conforming strncpy.  This is safe here.
+
+	* m4/ltdl.m4 (LT_LIB_DLLOAD): Define HAVE_LIBDLLOADER if we
+	have a dlloader to preload.
+	* libltdl/ltdl.c (lt_dlinit): Only preload if HAVE_LIBDLLOADER, only
+	declare preloaded_symbols then.  Fixes libltdl on static platforms.
+	* NEWS: Updated.
+
+2004-11-29  Gary V. Vaughan  <gary@gnu.org>
+
+	Add a search path option to libtoolize so that we can run it from
+	the testsuite without pulling in the last installed macros and
+	ltdl sources:
+
+	* libtoolize.m4sh:  Add a -I option to change libtoolize's search
+	path for macro files, and libltdl master sources.
+	(pkgvdatadir, pkgvmacrodir): Renamed...
+	(pkgvdatadirs, pkgvmacrodirs): ...as they can now contain a ':'
+	delimited list of directories.  Adjust all callers.
+	(func_copy_all_from_path): New function to search a ':' delimited
+	search path for a directory to copy.
+	(func_serial_update, func_ltmain_update, func_config_update): New
+	first parameter is a filename to search for.  srcdir parameter can
+	now be a ':' delimited search path.  Adjust all callers.
+	(func_copy_some_files): Ditto.
+	Put srcfile_spec first in parameter list for consistency with
+	other functions.  Adjust all callers.
+	(func_copy_cb): func_copy adapter function to call func_copy
+	correctly from func_copy_some_files.
+	(func_filename_path_search): Return the full path to the first
+	occurence of a named file found in a list of directories.
+	* tests/testsuite.at (LIBTOOLIZE): Wrap exported LIBTOOLIZE
+	initialisation in PREPARE_TESTS diversion to stop it being
+	discarded when testsuite is generated.
+	(AT_LIBTOOLIZE): Factor out libtoolize calls,
+	and set search path to find macros and libltdl source files from
+	the source tree.
+	(AT_CHECK_LIBTOOLIZE): Test it.
+	(AT_BOOTSTRAP): Adjust.  Split out call to make.
+	* tests/am-subdir.at: Call make explicitly.
+	(Makefile.am): Fix typo in ACLOCAL_AMFLAGS,
+
+2004-11-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_link): $dlsymsobj is really
+	$symfileobj, bug exposed only in the static preloading case
+	(symfileobj is created, but not linked into output).
+
+	* tests/demo-relink.test, tests/depdemo-relink.test: SKIP, don't
+	FAIL if no shared libs available in demo/.  Do not try to access
+	nonexistent files.
+
+	* libltdl/loaders/loadlibrary.c: Remove unneeded
+	file-static variable.
+
+2004-11-27  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* config/ltmain.m4sh: Add fully-qualified paths to temp_rpath
+	rather than unqualified paths in order to avoid possible errors
+	when computing the fully-qualified path later.
+
+2004-11-24  Jeff Squyres  <jsquyres@lam-mpi.org>
+
+	* m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG) [linux]: Support for Portland Group (aka
+	"pgi") compilers.
+	* NEWS, THANKS: Updated.
+
+2004-11-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am: Move Autotest rules from here...
+	* tests/Makefile.am: ...to here.
+	* bootstrap: Adjust.  Also, create temporary Makefile from
+	tests/Makefile.am so that bootstrap can create the Autotest
+	testsuite.
+
+2004-11-23  Gary V. Vaughan  <gary@gnu.org>
+
+	If the user's login shell is something crazy like, oooh,
+	/bin/tcsh, trying to execute bourne shell helper scripts with
+	the `$SHELL /path/to/helper $helper_flags' idiom incase the
+	execute bits were lost by say, eeer, cvs, is gonna blow up in
+	our faces.  This changeset tries to save these people from
+	their shells^H^H^H^H^H^H^H^H^Hmselves :->
+
+	* tests/defs.m4sh (SHELL): Move definition from here...
+	* config/general.m4sh (SHELL): ...to here.
+
+2004-11-23  Gary V. Vaughan  <gary@gnu.org>
+
+	The ltdl.h header is the published interface to libltdl, and
+	is thus not installed to $prefix/include/libltdl.  It has always
+	been used with `#include <ltdl.h>', so move just that one file
+	back to where it was before:
+
+	* libltdl/libltdl/ltdl.h: Moved from here...
+	* libltdl/ltdl.h: ...to here.
+	* libltdl/Makefile.am: Adjust.
+
+2004-11-23  Peter O'Gorman  <peter@pogma.com>
+
+	Do not require that libtoolize --ltdl=/some/path end in libltdl.
+	Move most libltdl headers to libltdl/libltdl to allow
+	`#include <libltdl/ltdl.h>' to always work:
+
+	* libltdl/Makefile.am, libltdl/loaders/Makefile.am: Look for includes
+	in the new location.
+	* libltdl/libltdl/lt__alloc.h, libltdl/libltdl/lt__dirent.h,
+	libltdl/libltdl/lt__glibc.h, libltdl/libltdl/lt__private.h,
+	libltdl/libltdl/lt_dlloader.h, libltdl/libltdl/lt_error.h,
+	libltdl/libltdl/lt_system.h, libltdl/libltdl/ltdl.h,
+	libltdl/libltdl/slist.h: Added files, moved from libtdl/.
+	* libltdl/lt__alloc.h, libltdl/lt__dirent.h, libltdl/lt__glibc.h,
+	libltdl/lt__private.h, libltdl/lt_dlloader.h, libltdl/lt_error.h,
+	libltdl/lt_system.h, libltdl/ltdl.h, libltdl/slist.h: Removed, moved
+	to libltdl/libltdl.
+
+2004-11-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (LT_INIT): s/libtool 1.6/libtool 2.0/.
+	(Invoking libtoolize): Fix typo.
+
+2004-11-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.m4sh (func_mode_install): Now that func_mktempdir
+	has been improved, the default directory template is perfectly
+	fine.
+
+	* doc/libtool.texi (Invoking libtoolize): Improve documentation
+	for use of ACLOCAL_AMFLAGS and AC_CONFIG_MACRO_DIR.
+
+2004-11-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_TAG_COMPILER): Document that with_gcc is
+	tag-dependent.
+
+	* m4/libtool.m4, tests/demo-nopic.test: Undo bogus commit.
+
+	* config/ltmain.m4sh (func_mode_link), tests/objectlist.test:
+	Make sure the argument to `-objectlist' may contain spaces.
+
+2004-11-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/m4general.m4sh, config/mailnotify.m4sh,
+	clcommit.m4sh: Updated from cvs-utils--tla--1.0 to allow
+	parallel commits, and use safer tmpfiles.
+
+2004-11-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Libltdl interface): Typos.
+
+	* doc/libtool.texi (Libltdl interface): Document public macros
+	LT_PATHSEP_CHAR, LT_DIRSEP_CHAR, use in path descriptions.
+
+2004-11-18  Daniel Reed  <djr@redhat.com>
+
+	* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [linux]: Interpret
+	`include' statements in toplevel ld.so.conf file.
+
+2004-11-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS) [cygwin, mingw, pw32]:
+	tag-protect setting of ld_shlibs.
+
+2004-11-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Libltdl interface): The path separator
+	is system-dependent.
+
+	* doc/libtool.texi (Linking static libraries): Typo.
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[aix4/aix5 !ia64]: Set whole_archive_flag_spec to '$convenience'
+	so convenience libs are really added to the link cmdline.
+
+2004-11-17  Mats Rynge  <rynge@isi.edu>
+
+	* libtool.m4 [linux]: Use only the CC basename in case statment
+	when checking for icc/ecc.  Allows for setting CC to the full path
+	to the compiler.
+
+	* libtool.m4 [solaris]: Added missing 'with linker' flags to
+	-z allextract ... -z defaultextract flags
+
+2004-11-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS): Typo: s/--rpath/-rpath/g.
+	(_LT_LANG_CXX_CONFIG): Ditto.
+
+	* configure.ac (APIVERSION): New substituted variable.
+	(pkgvdatadir): Ditto.  Versioned data directory.
+	(pkgvmacrodir): Ditto.  Versioned aclocal directory.
+	(LN): New check for LN command.
+	* Makefile.am (aclocal_DATA): Replaced with...
+	(pkgvmacro_DATA): ...this.
+	(install-data-local): Remove old shared resources.
+	(install-exec-hook): Make versioned links to executables.
+	(uninstall-hook): Remove versioned files.
+	* libltdl/Makefile.am (ltdldatadir): Redefine in terms of
+	pkgvdatadir.
+	* libltdl/loaders/Makefile.am (ltdldatadir): Ditto.
+	* libtoolize.m4sh: Copy macro files from versioned macro directory
+	instead of shared aclocal directory.
+	* doc/libtool.texi: Document it.
+	* NEWS: Updated.
+
+2004-11-10  Gary V. Vaughan  <gary@gnu.org>
+
+	From James Henstridge <james@jamesh.id.au>:
+	* m4/libtool.m4, m4/ltdl.m4, m4/ltoptions.m4: Added commented out
+	empty macro definitions to match each AU_DEFUN to help aclocal
+	from automake-1.4 regexps find the right libtool macro files.
+
+2004-11-10  James E Wilson  <wilson@specifixinc.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_link), tests/Makefile.am,
+	Fix error message with `-objectlist' file that does not exist.
+	* tests/objectlist.test:  New test for this.
+
+	* Makefile.am: config/ltmain.sh is generated by
+	config/ltmain.m4sh.
+
+2004-11-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Compile mode, Link mode,
+	Libltdl interface, Test descriptions, libtool script
+	contents): Some quote cleanup, more use of texinfo types.
+
+	* doc/libtool.texi (libtool script contents):
+	echo is now ECHO; mention argument restriction.
+
+	* doc/libtool.texi (Multiple dependencies): Minor rewording.
+
+	* doc/libtool.texi (User defined module data, References):
+	indentation and word-wrap cleanup.
+
+	* doc/libtool.texi (all over): White space cleanup:
+	two spaces at start of sentence, no TABs.
+
+2004-11-09  Gary V. Vaughan  <gary@gnu.org>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (libtool script contents): Fix description
+	of need_lib_prefix.
+
+2004-11-08  Peter Ekberg  <spam.protected>
+
+	* config/ltmain.m4sh (func_mode_link): forward thread
+	related flags to dependent applications and libraries
+	by adding them to `inherited_linker_flags'.
+
+2004-11-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/ltoptions.m4: Change all references of LT_LIBTOOL_INIT
+	to LT_INIT.
+
+2004-11-05  Peter Ekberg  <spam.protected>
+
+	* ltmain.m4sh (cwrappersource): clean up other warning on MinGW.
+
+2004-11-04  Bernhard Fischer  <spam.protected>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS), m4/ltoptions.m4
+	(_LT_SET_OPTIONS), README, README.alpha: Typos.
+
+2004-11-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (parse_dotla_file): Fix memleak.
+
+	* ltmain.m4sh (cwrappersource): Cast isalpha arguments correctly.
+
+2004-11-03  Peter Ekberg  <spam.protected>
+
+	* ltmain.m4sh (cwrappersource): clean up warnings and
+	#include errors on MinGW.
+
+2004-11-01  Peter Ekberg  <spam.protected>
+
+	* config/ltmain.m4sh (cwrappersource): clean up warnings and
+	#include errors.
+
+2004-11-01  Peter Ekberg  <spam.protected>
+
+	Sometimes, a wrapper script is generated for an executable that,
+	itself, does not link against an uninstalled library.  It appears
+	that this can happen if you are building a project where:
+
+	  (1) there is a library
+	  (2) there is an executable that does not, itself, link against
+	      that library
+
+	In this case, notinst_deplibs is empty, and when the wrapper
+	script is loaded by libtool during ./libtool mode=install, there
+	is a check for "is notinst_deplibs empty".  In this case, it is,
+	so libtool reports an error.
+
+	I don't think it is wrong to have a wrapper script for an exe that
+	*technically* doesn't need it.  But instead of checking for
+	notinst_deplib nonempty as a proxy for "did wrapper script get
+	sourced into my environment properly" a different var should be
+	used.
+
+	* config/ltmain.m4sh (func_mode_install): set new variable
+	`generated_by_libtool_version' in wrapper script when using
+	libtool_install_magic.  When verifying that wrapper script was
+	properly sourced, check that `generated_by_libtool_version' is
+	non-empty, instead of using notinst_deplibs.
+
+2004-11-01  Charles Wilson  <spam.protected>,
+	    Peter Ekberg  <spam.protected>
+
+	* config/ltmain.m4sh (func_mode_install): On Windows based hosts,
+	ensure that import libraries don't get stripped.
+	* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER): On Windows based hosts,
+	use postinstall_cmds to strip DLL (not import lib!) when symbol
+	stripped installation was requested.
+
+2004-10-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (loader_init_callback): Back out broken cast.
+
+	* libltdl/ltdl.c (loader_init_callback, lt_dlexit): Add casts to
+	target type.
+
+	* tests/defs.m4sh (func_exec): `shift'ing when there is nothing
+	to shift is non-portable.
+
+2004-10-28  Patrick Welche  <prlw1@newn.cam.ac.uk>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am, Makefile.maint: Use path for dependencies built
+	in the source tree, to cater for BSD make.
+
+2004-10-24  Noah Misch  <noah@cs.caltech.edu>
+
+	* config/ltmain.m4sh (func_lalib_p, func_ltwrapper_p): New
+	functions that abstract .la sanity checking.
+	(func_mode_execute, func_mode_install, func_mode_link)
+	(func_mode_uninstall): Use them.
+
+2004-10-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.m4sh (opt_silent): Whether --silent was given.
+	(run, show): Deleted.  All callers converted to opt_dry_run,
+	opt_silent or calls to func_show_eval.
+	* tests/mdemo-dryrun.test: Adjust.
+
+	* HACKING: Fix a typo in the gpg --verify instructions.
+
+	* Makefile.maint (cvs-dist): Generate signatures and directives
+	for bz2 upload.
+
+2004-10-23  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh (func_mode_link): Make Gary's new tests
+	pass. When the output wrapper script is not in the current
+	directory, we can not use an rpath which is relative to the
+	current directory. Use an absolute path instead.
+
+2004-10-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* clcommit.m4sh: Add --rcfile option.
+
+	* clcommit.m4sh: Updated again, to support file list limited
+	commits to CVS, and to fix another occurence of the bash bug
+	that was preventing non-tla users from sending a commit mail.
+
+2004-10-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* TODO, libltdl/lt_error.h, libltdl/ltdl.c, libltdl/ltdl.h:
+	Undo accidental commit.
+
+	* Makefile.maint: Fix typo.
+
+2004-10-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* clcommit.m4sh, config/mailnotify.m4sh: Updated from
+	cvs-utils--tla--1.0 to fix quoting of metachars in patch names.
+
+	* HACKING: Updated: `.in' files are now `.m4sh'; document some
+	more coding standards for these files.
+
+	* config/general.m4sh (sed_double_backslash): Undo an
+	over-optimisation.
+
+2004-10-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* AUTHORS: Reformatted to better reflect the current state of
+	Libtool maintainership.
+	* THANKS: Reformatted to give maintainers a quick way to look
+	up who has supplied FSF paperwork.
+
+2004-10-21  Noah Misch  <noah@cs.caltech.edu>,
+	    Gary V. Vaughan  <gary@gnu.org>
+
+	* config/general.m4sh (sed_double_backslash): Improve this sed
+	expression to correct left anchored \$ input to
+	double_quote_subst, as well as backslash escaped $ preceded by
+	any odd-numbered amount of \ characters.
+
+2004-10-20  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/general.m4sh (sed_double_backslash): New sed expression
+	to escape \$ properly in combination with double_quote_subst.
+	(func_quote_for_eval): Four space indent margin for functions!
+	(func_quote_for_expand): Use $sed_double_backslash.
+	(func_show_eval): New function that echos an escaped but variable
+	expanded command, and then evaluates it.
+
+2004-10-20  Noah Misch  <noah@cs.caltech.edu>,
+	    Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (sed_quote_subst): Remove superfluous backslashes
+	from the match character set.
+	(double_quote_subst): Ditto.
+	* config/general.m4sh (sed_quote_subst): Ditto.
+	(double_quote_subst): New variable, copied from
+	m4/libtool.m4. Much the same as sed_quote_subst, but variable
+	references are not quoted.
+	(func_quote_for_eval): Given any $foo; $bar and
+	$foo must be identical after the following commands:
+	    func_quote_for_eval "$foo"
+	    eval "bar=$func_quote_for_eval_result"
+	(func_quote_for_expand): In a similar vein to to func_quote_for_eval,
+	except that variable expansions are not protected when quoting the
+	command for subsequent display.
+	* config/ltmain.m4sh: Factor away use of $sed_quote_subst now that
+	it has been subsumed into func_quote_for_eval.
+	(func_mode_link): Instead of `2004-10-14 Peter O'Gorman' below,
+	use func_quote_for_expand so that ${wl} is expanded properly in
+	the $show expression.
+
+2004-10-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.m4sh (func_mode_finish): solaris-2.6 also has
+	crle(1).
+	Reported by Albert Chin-A-Young <china@thewrittenword.com>
+
+2004-10-16  Gary V. Vaughan  <gary@gnu.org>
+
+	Add some new tests for Libtool's support of Automake
+	subdir-objects builds.  This marks the beginning of a move to an
+	Autotest driven test framework, which will eventually allow us to
+	trim away many of the generated files in the current test demo
+	subdirectories:
+
+	* configure.ac (AC_CONFIG_TESTDIR): Re-enable commented out
+	Autotest macros.
+	(AUTOTEST, M4SH): Use --language long hand.
+	* bootstrap: Generate tests/testsuite, and by implication
+	tests/package.m4.
+	* Makefile.am (edit): Add substitutions needed to generate
+	tests/package.m4 from bootstrap.
+	(check-recursive): Add tests/testsuite.
+	(TESTSUITE): The new Autotest testsuite target.
+	(TESTSUITE_AT): The Autotest sources.
+	(EXTRA_DIST): Distribute the generated testsuite and sources.
+	(tests/package.m4): Use $(edit) to propagate package metadata to
+	the new tests.
+	(tests/testsuite): Build the testsuite.
+	(tests/atconfig): How to regenerate the file.
+	(check-local): Hook Autotest into `make check'.
+	(installcheck-local): Run the testsuite on the installed tree.
+	(clean-local): Tidy our file droppings.
+	* tests/Makefile.am: Remove bitrotted code from Autotest
+	experiments in Autoconf 2.52 era.  Updated the rest and moved into
+	Makefile.am.
+	* tests/testsuite.at: New container for Autotest test groups.
+	* tests/am-subdir.at: New test group for compatibility with
+	Automake's subdir-objects builds.  Currently holds two tests, one
+	for a C project and another similar project in C++.
+	* TODO: Add an entry to remind us that these new tests expose a
+	bug in libtool.
+	* NEWS: Updated.
+
+2004-10-14  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh: Revert most of my last commit, only eval
+	\$show \"$cmds\", and only when building a library. I'm a wimp.
+	Thanks Gary for pointing out errors in previous commit.
+
+2004-10-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.m4sh (func_mode_finish): Mention crle(1) on
+	solaris 2.7 and higher in the finalisation notes.
+	Reported by Kurt J. Lidl <lidl@pix.net>
+
+	* tests/cdemo-undef.test: New test for hosts that allow shared
+	libraries with undefined symbols, but have no C++ compiler
+	installed.
+	* tests/Makefile.am (COMMON_TESTS): Add it.
+
+2004-10-13  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh: Make sure that we $show what we will $run,
+	use eval $show if we do $run eval.
+
+2004-10-13  Charles Wilson  <spam.protected>
+
+	* config/ltmain.m4sh: add foo/bin for every foo/lib
+	in dllsearchpath when creating wrapper script.  Fixes
+	depdemo-relink test failure.
+
+2004-10-12  Charles Wilson  <spam.protected>
+
+	* config/ltmain.m4sh (func_mode_link): don't relink
+	on cygwin/mingw; no need.  But do ensure that wrappers
+	are created unless doing a purely static build.
+
+2004-10-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/tagdemo-undef.test: New test for hosts that allow shared
+	libraries with undefined symbols.
+	* tests/Makefile.am (CXX_TESTS): Add it.
+
+2004-10-11  Charles Wilson  <spam.protected>
+
+	* tests/link.test: Fix check for use of libnlsut.a under
+	Cygwin.
+
+2004-10-11  Noah Misch  <noah@cs.caltech.edu>
+
+	* tests/quote.test: Do not look for $preargs in the output,
+	because libtool may change them.
+
+2004-10-10  Charles Wilson  <spam.protected>
+
+	* config/ltmain.m4sh: Really don't require versions of GNU
+	sed newer than 3.02 for Cygwin and MinGW, and don't break
+	dryrun mode.
+
+2004-10-10  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* config/getopt.m4sh: Under MinGW, reported paths may include ':'
+	so ':' should not be used as the sed delimiter.  Use '*' instead
+	since it is very unlikely to appear in a path.
+
+2004-10-10  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* config/ltmain.m4sh: Don't require versions of GNU sed newer than
+	3.02 for Cygwin and MinGW.
+
+2004-10-10  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* tests/pdemo-inst.test: Correction for mis-application of
+	Charles Wilson's earlier patch.
+
+2004-10-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_LANG_F77_CONFIG): Make sure the save and
+	restore code for CC is nested at the same depth.
+	(_LT_LANG_CXX_CONFIG): Ditto, but for several variables.
+
+2004-10-08  Gary V. Vaughan  <gary@gnu.org>
+
+	Update to the latest commit and mailnotify scripts from
+	gary@gnu.org--2004/cvs-utils--tla--1.0:
+
+	* commit, config/mailnotify: Removed.  Now built from...
+	* clcommit.m4sh, config/mailnotify.m4sh: ...these new sources.
+	* Makefile.maint (commit, config/mailnotify): How to build them.
+	* bootstrap: If we have a checked out tree (i.e. clcommit.m4sh
+	is present), then build them.
+
+2004-10-08  Gary V. Vaughan  <gary@gnu.org>
+
+	Fix some issues that mangled the reexecution path to a script,
+	and thus prevented it from finding itself:
+
+	* config/general.m4sh (progname): Don't actually change the name
+	of the script if it begins with a `-', just prepend `./'.
+	(progpath): Add a new clause that first searches the execution
+	PATH, and then finally assumes this script is in the current
+	working directory if $progname has no directory separators (e.g
+	when invoked as `$SHELL progname').
+
+2004-10-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/general.m4sh (func_verbose): Work around a bash bug in
+	shell functions.
+
+2004-10-08  Charles Wilson  <cygwin@cwilson.fastmail.fm>
+
+	* tests/pdemo-inst.test: pdemo-inst should depend on pdemo-make.
+	* config/ltmain.m4sh: Windows and Cygwin reserve the .lnk
+	extension to represent shortcuts.  Use the extension ".lnkscript"
+	rather than ".lnk" for the piecewise linking ld script in order to
+	avoid the conflict.
+
+2004-10-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (lt_dlexit, lt_dlpath_insertdir): Fix memleaks,
+	free user_search_path on lt_dlexit.
+
+2004-10-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/sh.test: Remove tests which fail on AS_SHELL_SANITIZE
+	from autoconf >= 2.59.
+
+	* TODO: Remove item: no need for a libltdl without stdio.
+
+2004-10-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/defs.m4sh (scripts): Actually scan the generated ltmain.sh
+	for shell portability problems.
+
+	* m4/libtool.m4 (_LT_FORMAT_COMMENT): Shell meta-characters in
+	_LT_DECL descriptions were not being escaped before injection into
+	TAG CONFIG here documents in config.status.
+
+2004-10-06  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (_LT_PROG_CXX, _LT_PROG_F77): New macros to work
+	around the deficiencies in AC_PROG_CXX and AC_PROG_F77.
+	* configure.ac: Cleaned up, having moved the checks for compilers
+	which do not exist to libtool.m4.
+
+2004-10-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (try_dlopen): Move .la file parsing
+	part.. (parse_dotla_file): ..here.  Adjust.
+
+	* libltdl/ltdl.c (load_deplibs, try_dlopen): Revert unnecessary casts
+	to int from my patch from 2004-10-01.
+
+	* AUTHORS: Add myself.
+
+2004-10-05  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh [darwin]: Make the -dylib_file flag work on
+	older darwins too. Reported by Christoph Egger.
+
+2004-10-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.ac: Bumped version to 2.1a.
+
+2004-10-04  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_PROG_ECHO_BACKSLASH): Don't confuse $ECHO
+	with $lt_ECHO, or we always get a libtool with ECHO=echo, rather
+	than testing for a mechanism that quotes \ properly.
+	* NEWS: Updated.
+
+	* config/ltmain.m4sh: Need to include getopt.m4sh earlier so that
+	progpath is set before it is called to --no-reexec.
+	* NEWS: Updated.
+
+2004-10-04  Gary V. Vaughan  <gary@gnu.org>
+
+	Without this change, the distributed libtool tarball has a
+	dependency on autom4te.  There was some inconsistency in the
+	filenames: now we have foo.m4sh -> m4sh -> foo.in -> configure
+	-> foo[.sh].  Bootstrap runs the m4sh steps and the resulting .in
+	files are distributed:
+
+	* tests/Makefile.am (EXTRA_DIST): Distribute defs.m4sh.
+	* Makefile.am (EXTRA_DIST): Distribute libtoolize.m4sh.
+	(libtoolize.in, libtoolize): Split into bootstrap and runtime
+	stages.
+	($(top_srcdir)/tests/defs.in, $(top_srcdir)/tests/defs): Ditto.
+	($(top_srcdir)/config/ltmain.sh): Swap ltmain.m4sh and ltmain.in
+	names.
+	* bootstrap: Make libtoolize.in and tests/defs.in.
+	* NEWS: Updated.
+
+2004-10-03  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* README, README.alpha: Update notes regarding available VERBOSE
+	settings.
+
+2004-10-03  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* config/ltmain.in: Change $XSED to $Xsed to fix hang noticed
+	under MinGW.
+	* tests/defs.in: Support VERBOSE=debug to enable shell tracing
+	while running tests.
+
+2004-10-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Updated.
+	* configure.ac: Bumped version to 1.9e.
+
+	GNU libtool 1.9d was released.
+
+	* configure.ac: Bumped version to 1.9d.
+	* NEWS: Updated.
+
+	* libltdl/lt__alloc.h (lt__alloc_die): Declare with LT_SCOPE as
+	per Ralf's original patch.
+	Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+
+	* libltdl/Makefile.am (libltdlc_la_LIBADD): Don't use
+	libdlloader_la_OBJECTS, an undocumented Automake internal
+	variable...
+	(libltdlc_la_SOURCES): ...use libdlloader_la_SOURCES here
+	instead.
+	Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+
+	* libltdl/argz_.h: Forgot to spell lt_system.h with just one `_'.
+
+	* libltdl/argz_.h: Forgot to include lt__system.h for LT_SCOPE
+	definition.
+
+2004-10-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>,
+	    Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/lt__alloc.h: Declare exported functions with LT_SCOPE
+	for mingw32.
+	* libltdl/lt__dirent.h: Ditto.
+	* libltdl/argz._h: Ditto.  Be careful about not requiring
+	additional libltdl files when used outside of libltdl.
+	* libltdl/slist.h: Ditto.
+	* HACKING: Add a section on libltdl implementation layering.
+
+2004-10-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/quote.test: echo is called ECHO now.  Make sure we extract
+	the value of ECHO from the libtool script.
+	Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+
+2004-10-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (hardcode_shlibpath_var) [darwin7*]: Revert my
+	hack from 2004-09-30 now that I've removed /lib/hello.la and the
+	tests work properly for me again.
+
+2004-10-02  Jim Tison  <jtison@us.ibm.com>
+
+	Initial support for s390x-ibm-tpf:
+
+	* m4/libtool.m4: Correct obvious spelling errors in remarks.
+	(_LT_ENABLE_LOCK): Make s390x-ibm-tpf hosts adopt elf64_s390
+	conventions.
+	(_LT_SYS_DYNAMIC_LINKER): Set defaults for s390x-ibm-tpf host.
+	(_LT_CHECK_MAGIC_METHOD): Skip all dependency checks for
+	s390x-ibm-tpf hosts.
+	(_LT_LINKER_SHLIBS): Make s390x-ibm-tpf hosts adopt GNU/Linux OS
+	attributes.
+	* NEWS: Updated.
+
+2004-10-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.in (func_mode_install): Need to set $tmpdir before
+	using it.
+
+	* config/ltmain.in (func_mode_link): Fix quoting bug.  Fixes
+	e.g. the quoting of the -export-symbols-regex argument in .la
+	files' relink_command.
+
+	* libltdl/lt__alloc.c (lt__memdup): Allocation can fail, so we
+	need to guard against null pointer dereference here.
+	* libltdl/ltdl.c (lt_dlcaller_register): Ditto.
+
+	* libltdl/slist.c (slist_foreach): result was declared as
+	inner variable, shadowing the actually returned value.
+
+	* libltdl/ltdl.c (load_deplibs, try_dlopen): Cast argument
+	to isspace/isalnum to the correct range.  Also, cast to int to
+	avoid compiler warnings.
+
+2004-09-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (try_dlopen): Fix null pointer dereference in
+	case the name given to lt_dlopen contains no extension.
+
+	* libltdl/lt_dlloader.c (lt_dlloader_remove), libltdl/ltdl.c
+	(tryall_dlopen, lt_dlhandle_next): Show usage of function pointers.
+
+	* doc/libtool.texi (LT_INIT, Using libltdl)
+	(Module loaders for libltdl, Multiple dependencies)
+	(libtool script contents): Fix several typos (trivial change).
+        Also, libltdl consists of more than two small files.
+
+2004-09-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (hardcode_shlibpath_var) [darwin7]: My Panther
+	workstation doesn't hardcode the shared library path, although it
+	used to, so this is more likely a function of the binutils and/or
+	gcc I am using at the moment.  The hardcode value setting code for
+	the configure script sucks at the moment though...
+	* TODO: ...and needs to do a test compile instead of a table
+	lookup before 2.0 final.
+
+	* m4/libtool.m4 (echo): Use ECHO throughout for consistency with
+	config/ltmain.in.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (rm): Use RM throughout for consistency with
+	config/ltmain.in.
+	Reported by Charles Wilson <cwilson@spam.protected>
+
+2004-09-27  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (_LT_LANG_CXX_CONFIG) [darwin]: Don't echo gcc -v
+	output during configure. (Really this time, honest)
+
+2004-09-26  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS) [aix]: In archive_expsym_cmds,
+	move -bnoentry linker option before $compiler_flags to honor any
+	possible -e entries in LDFLAGS.
+
+2004-09-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.in (func_mode_link): When linking an installed
+	libtool library on the command line using -lfoo we need to find
+	the library in the search paths and add it's dependency_libs to
+	the link in the conv pass so that any libtool libs listed are
+	correctly expanded in the link pass.
+
+2004-09-24  Charles Wilson  <cwilson@spam.protected>
+
+	* libtool.m4 (_LT_SYS_DYNAMIC_LINKER): Revert changeset from
+	`2004-09-22  Charles Wilson  <cwilson@spam.protected>'.
+
+2004-09-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/general.m4sh (Xsed): Set a default when not used from
+	ltmain.in.
+	(ECHO): Audit for (and correct!) uses of $ECHO with more than one
+	argument, which breaks when ECHO='printf %s\n', and with possible
+	`-' as first character of the argument, which breaks `print -r'
+	and some implementations of `echo'.
+	* config/ltmain.in, tests/defs.in, libtoolize.in (ECHO): Ditto.
+	Reported by Albert Chin-A-Young <china@thewrittenword.com>
+
+2004-09-24  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (_LT_CMD_STRIPLIB) [darwin]: strip archives too.
+
+	* m4/libtool.m4 (_LT_LANG_CXX_CONFIG) [darwin]: Don't echo gcc -v
+	output during configure.
+
+2004-09-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_DECL_EGREP): Only the newest CVS autoconf
+	AC_SUBSTs for GREP.  Do our own here too to cater for release
+	autoconfen.
+
+	* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [openbsd3.3]: Set
+	need_version to yes or no depending on the os release.
+	Reported by Dalibor Topic <robilad@kaffe.org>
+
+2004-09-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/cdemo-conf.test, tests/cdemo-exec.test,
+	tests/cdemo-make.test, tests/cdemo-shared.test,
+	tests/cdemo-static.test, tests/demo-conf.test,
+	tests/demo-deplibs.test, tests/demo-exec.test,
+	tests/demo-hardcode.test, tests/demo-inst.test,
+	tests/demo-make.test, tests/demo-nofast.test,
+	tests/demo-noinst-link.test, tests/demo-nopic.test,
+	tests/demo-pic.test, tests/demo-relink.test,
+	tests/demo-shared.test, tests/demo-static.test,
+	tests/demo-unst.test, tests/depdemo-conf.test,
+	tests/depdemo-exec.test, tests/depdemo-inst.test,
+	tests/depdemo-make.test, tests/depdemo-nofast.test,
+	tests/depdemo-relink.test, tests/depdemo-shared.test,
+	tests/depdemo-static.test, tests/depdemo-unst.test,
+	tests/f77demo-conf.test, tests/f77demo-exec.test,
+	tests/f77demo-make.test, tests/f77demo-shared.test,
+	tests/f77demo-static.test, tests/link-2.test, tests/link.test,
+	tests/mdemo-conf.test, tests/mdemo-dryrun.test,
+	tests/mdemo-exec.test, tests/mdemo-inst.test,
+	tests/mdemo-make.test, tests/mdemo-shared.test,
+	tests/mdemo-static.test, tests/mdemo-unst.test,
+	tests/mdemo2-conf.test, tests/mdemo2-exec.test,
+	tests/mdemo2-make.test, tests/nomode.test, tests/pdemo-conf.test,
+	tests/pdemo-exec.test, tests/pdemo-inst.test,
+	tests/pdemo-make.test, tests/quote.test, tests/sh.test,
+	tests/suffix.test, tests/tagdemo-conf.test,
+	tests/tagdemo-exec.test, tests/tagdemo-make.test,
+	tests/tagdemo-shared.test, tests/tagdemo-static.test,
+	tests/tagtrace.test: POSIX `.' searches only in user's $PATH, so
+	we must use `. ./defs' to source the common code.
+	Reported by Alexandre Duret-Lutz <adl@src.lip6.fr>
+
+	* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Gah.  Merge error
+	corrected.
+
+2004-09-23  Gary V. Vaughan  <gary@gnu.org>
+
+	Since defs can change (path to grep for example) when it is made
+	for a different host, it can't be shipped.  That also means that
+	defs will always be generated in the build tree, so each test case
+	can have the srcdir discovery factored away into tests/defs.in:
+
+	* Makefile.am (EXTRA_DIST): s/defs/defs.in/g
+	* tests/Makefile.am (defs): New rule to remake defs from the
+	parent directory's Makefile.
+	* tests/cdemo-conf.test, tests/cdemo-exec.test,
+	tests/cdemo-make.test, tests/cdemo-shared.test,
+	tests/cdemo-static.test, tests/demo-conf.test,
+	tests/demo-deplibs.test, tests/demo-exec.test,
+	tests/demo-hardcode.test, tests/demo-inst.test,
+	tests/demo-make.test, tests/demo-nofast.test,
+	tests/demo-noinst-link.test, tests/demo-nopic.test,
+	tests/demo-pic.test, tests/demo-relink.test,
+	tests/demo-shared.test, tests/demo-static.test,
+	tests/demo-unst.test, tests/depdemo-conf.test,
+	tests/depdemo-exec.test, tests/depdemo-inst.test,
+	tests/depdemo-make.test, tests/depdemo-nofast.test,
+	tests/depdemo-relink.test, tests/depdemo-shared.test,
+	tests/depdemo-static.test, tests/depdemo-unst.test,
+	tests/f77demo-conf.test, tests/f77demo-exec.test,
+	tests/f77demo-make.test, tests/f77demo-shared.test,
+	tests/f77demo-static.test, tests/link-2.test, tests/link.test,
+	tests/mdemo-conf.test, tests/mdemo-dryrun.test,
+	tests/mdemo-exec.test, tests/mdemo-inst.test,
+	tests/mdemo-make.test, tests/mdemo-shared.test,
+	tests/mdemo-static.test, tests/mdemo-unst.test,
+	tests/mdemo2-conf.test, tests/mdemo2-exec.test,
+	tests/mdemo2-make.test, tests/nomode.test, tests/pdemo-conf.test,
+	tests/pdemo-exec.test, tests/pdemo-inst.test,
+	tests/pdemo-make.test, tests/quote.test, tests/sh.test,
+	tests/suffix.test, tests/tagdemo-conf.test,
+	tests/tagdemo-exec.test, tests/tagdemo-make.test,
+	tests/tagdemo-shared.test, tests/tagdemo-static.test,
+	tests/tagtrace.test: Removed srcdir discovery boilerplate...
+	* tests/defs.in: ...and put it here.
+
+2004-09-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): move symcode calculation
+	to correct place.
+	* doc/libtool.texi (libtool script contents): update description
+	of global_symbol_to_cdecl.
+
+2004-09-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.ac (M4SH): AC_SUBST m4sh expander.
+	* config/general.m4sh, config/getopt.m4sh: New files with factored
+	out functionality from...
+	* config/ltmain.in, libtoolize.in: ...here.  m4_include the shared
+	code, and call AS_SHELL_SANITIZE.  Also quote all `[' and `]' to
+	survive m4 run.
+	(func_serial): No need to double up m4sh quotes after a `#'.
+	(func_check_macros): Escape `dnl' to stop m4sh interpreting it as
+	a macro.
+	* tests/defs.in: New file expanded into tests/defs by autom4te.
+	* m4/libtool.m4 (_LT_DECL_EGREP): Also require fgrep for the tests
+	that use it.
+	* Makefile.am ($(top_srcdir)/config/ltmain.sh): Now built with
+	M4SH.
+	(libtoolize): Ditto.
+	* bootstrap: Set M4SH for call to make.
+	* HACKING: No need to sync to AS_SHELL_SANITIZE by hand any more.
+
+	* m4/libtool.m4: _LT_DECL uppercase ECHO.
+	* config/ltmain.in: Use it throughout.
+	(func_mkdir_p): Now matches the other implementations in
+	tests/defs and libtoolize.in.
+	* tests/sh.test: Updated to detect ECHO misuse.
+
+2004-09-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.in (func_mode_link): Propagate a convenience
+	library's dependency libs correctly when it is being linked into a
+	libtool library.  Deplibs are now propagated whether libdir is set
+	or not.
+
+2004-09-22  Andreas Schwab  <schwab@suse.de>
+
+	The dlpreopen pass over libraries reverses the elements in the
+	$deplibs list.  This causes problems when the link pass tries to
+	find libraries when they are located in non-standard places
+	denoted by -L options.  Due to the reversed order these -L options
+	occur after the libraries that need them, and they are not found:
+
+	* config/ltmain.in: (Un)Reverse $deplibs list at the start of the
+	link pass in lib mode.
+
+2004-09-22  Charles Wilson  <cwilson@spam.protected>
+
+	* ltmain.in (func_generate_dlsyms) [cygwin, mingw]: when creating
+	a .exp file for an executable, also create a .def file, and add
+	that file to the link command via SYMFILES.  This causes binutils
+	to generate an .edata section, and allows self dlopening to work.
+	* NEWS: Updated.
+
+	* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER): better quoting for
+	postinstall_cmds and postuninstall_cmds to allow spaces in install
+	paths.
+
+	* config/ltmain.in (func_generate_dlsyms): Addresses in
+	_preloaded_symbols[] cannot go into .rdata section if symbols are
+	DATA imported from DLL, on windows, because runtime relocations
+	must happen.
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS([TAGNAME])):	Build exports for
+	symbols in .rdata sections.
+
+2004-09-19  Gary V. Vaughan  <gary@gnu.org>
+
+	The checks in assign.test are trying to catch case of this ilk:
+	`foo=bar break', but unfortunately they also choke on `foo=bar;
+	break' and `foo=bar && break'.  Writing a sophisticated test to
+	catch just the intended case seems like more trouble than it's
+	worth, but leaving the test in causes the testsuite to fail on
+	valid m4sh output:
+
+	* tests/assign.test: Removed; chokes on perfectly valid shell
+	syntax.
+	* tests/Makefile.am (COMMON_TESTS): Remove assign.test.
+	* tests/defs.in (scripts): Don't check the m4sh inputs, go back
+	to checking the generated ltmain.sh script.
+
+2004-09-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.in (func_echo): Except for multi-line warnings and
+	errors, always use func_echo.  $show is for command output, and
+	$echo is for internal use in backtick expressions and similar.
+
+2004-09-17  Gary V. Vaughan  <gary@gnu.org>
+
+	Missed a couple of MKDIR_P references in ltmain.in in my last
+	patch; fix them carefully.  Introduce an opt_dry_run to ltmain.in
+	so that the implementations of func_mkdir_p can converge, and a
+	func_mktempdir to do a better job of temporary directory creation:
+
+	* libtoolize.in (func_mkdir_p): Don't fail if the directory wasn't
+	created in dry run mode.
+	* tests/defs (func_mkdir_p): Ditto.  We don't actually have a dry
+	run mode for the tests, but the function is written carefully to
+	be kept in synch and work correctly here too.
+	* config/ltmain.in (func_mkdir_p): Ditto.  This copy of the
+	function now only differs in its use of $echo over $ECHO.
+	(func_extract_archive): Removed first redundant mkdir call.
+	(func_mktempdir): New function that tries to avoid races when
+	making temporary directories.
+	(opt_dry_run): Set this if --dry-run is given at the CLI, or if
+	tests/mdemo-dryrun.test has forced the value of $run.
+	(func_mode_install): Call $MKDIR directly and error out if the
+	directory cannot be created.
+	(func_mode_link): Rather than copying func_mkdir_p into the
+	wrapper script as a replacement for $MKDIR_P, we know that the
+	script won't be called my `make -j', so write the current value of
+	$MKDIR.
+
+2004-09-17  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4: remove an extra "]"
+
+	* m4/libtool.m4 [darwin] (_LT_LANG_CXX_CONFIG): Changes for 10.4.
+	* config/libtool.in [darwin]: ditto.
+
+2004-09-16  Gary V. Vaughan  <gary@gnu.org>
+
+	My most recent `2004-09-02 Gary V. Vaughan' patch for mkdir_p
+	below is horrendously broken since it makes the installed libtool
+	try to run the mkinstalldirs or install-sh helper scripts.  This
+	patch fixes the `make -j' mkdir race condition internally:
+
+	* libtoolize.in (func_mkdir_p): New slice and dice algorithm
+	to build the directory tree one dir at a time, ignoring errors
+	until the end incase they are transient due to a concurrent
+	identical mkdir.
+	* tests/defs (func_mkdir_p): Ditto.
+	* config/ltmain.in (func_mkdir_p): Ditto, except that ltmain.in
+	uses $echo rather than $ECHO, and uses $show and $run to interact
+	correctly with the command line.
+	* configure.ac (AM_INIT_AUTOMAKE): 1.8 is sufficient again.
+	* Makefile.am (edit): Don't substitute automake's $(mkdir_p).
+	* NEWS: Updated.
+
+2004-09-15  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* libltdl/loaders/loadlibrary.c: Compilation fixes (originally
+	from Gary V. Vaughan) to compile under MinGW.
+	* config/mkstamp: Translate input data so that it is assured to
+	use the Unix line terminations. This is necessary under Windows if
+	the files are checked out with CR/NL line terminations. A
+	side-effect of this change is that input must always be from
+	stdin. Previously a filename argument was accepted as well.
+
+2004-09-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/Makefile.am: Use the same CPP, F77, CXX and CXXFLAGS
+	for the test suite.
+
+2004-09-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_ENABLE_LOCK):Replace AC_TRY_LINK with
+	AC_LINK_IFELSE to get rid of `autoconf -Wobsolete' warning.
+	* m4/ltdl.m4 (LT_LIB_DLLOAD): Ditto.
+
+2004-09-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.in (func_quote_for_eval): Set a return value to
+	avoid forking at every call.  Changed all callers.
+	(func_mode_link): Simplified, and removed the final non-portable
+	nested escaped double quotes in back quotes usage in the process.
+
+2004-09-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.in (func_quote_for_eval): Factor out the ugly
+	shell meta-character quoting.  Changed all callers.
+
+2004-09-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Simplification:
+	distinguish between data and code symbols on every system.
+
+2004-09-14  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	Unfortunately, libtool has no way of telling if unrecognized
+	compiler flags need an argument or not, and can disect options and
+	pass parts through incorrectly.  This changeset reverts both
+	2004-09-06 Albert Chin-A-Young (topmost) and 2004-09-05 Albert
+	Chin-A-Young below, and recognises more options explicitly:
+
+	* config/ltmain.in (func_mode_link): Pass through options needed
+	to compile in 64-bit mode with gcc, and the SGI, Sun, HP and IBM
+	compilers.
+
+2004-09-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_CMD_GLOBALS_SYMBOLS): Fix a typo I made when
+	applying 2004-09-11 Ralf Wildenhues.
+
+2004-09-12  Brad  <brad@comstyle.com>
+
+	* libtool.m4: Fixes for the OpenBSD support
+
+2004-09-12  Peter O'Gorman  <peter@pogma.com>
+
+	Our fortran tests were not very good. All the libraries created
+	were convenience libs, so we did not test the creation of shared
+	libraries on any platform. Also none of the libs used any actual
+	fortran library calls, adding a call to write(*,*) in each lib
+	causes the tests to fail on darwin (and presumably other platforms).
+	These new tests would likely cause many more fortran test failures,
+	so if there is an error during make it is reported as SKIP.
+
+	* tests/f77demo-make.test: Don't fail hard, skip on failure.
+	* tests/f77demo/foof2.f: New file.
+	* tests/f77demo/foof3.f: New file.
+	* tests/f77demo/fprogram.f: Call routine in new lib.
+	* tests/f77demo/foof.f: Call routine in another new lib.
+	* tests/f77demo/Makefile.am: Make a couple of new libraries, add
+	$(FLIBS) to cprogram LDADD.
+
+2004-09-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): The linker distinguishes
+	data and code symbols on linux-gnu/ia64.  Fixes multiple testsuite
+	failures.
+	* NEWS: Updated.
+
+2004-09-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/loaders/shl_load.c (get_vtable): Typo.
+
+2004-09-06  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	Hopefully, passing unrecognised compiler arguments through
+	unmolested will prove to be a good plan for the 2.0 release.  If
+	it goes awry, we can get back to where we were by reverting this
+	patch and the 2004-09-05 Albert Chin-A-Young patch, aka
+	gary@gnu.org--2004/libtool--devo--1.0--patch-169,172:
+
+	* config/ltmain.in (func_mode_link): Because we now pass through
+	compiler arguments we doesn't recognize, the code to pass
+	through GCC's -m* arguments is not needed.
+
+2004-09-06  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* Makefile.am (clean-ltmain-sh): Using '==' to test for equality
+	in a shell script is not portable. Use '=' instead.
+
+2004-09-05  Andreas Schwab  <schwab@suse.de>
+
+	* m4/ltdl.m4 (LT_WITH_LTDL): Remove excess quoting in argument of
+	AC_CONFIG_SUBDIRS.
+
+2004-09-05  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* config/ltmain.in (func_mode_link): Pass otherwise unrecognised +
+	and - style switches to the compiler.
+	* NEWS: Updated.
+
+2004-09-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (libtool): Force libtool to be regenerated if
+	stamp-vcl has changed.
+
+2004-09-05  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* m4/libtool.m4, config/ltmain.in: When calling $LTCC,
+	pass default $CFLAGS through with $LTCFLAGS.
+
+2004-09-03  David Edelsohn  <dje@watson.ibm.com>
+
+	* config/ltmain.in (func_mode_link): Use $pic_object as
+	$non_pic_object if $non_pic_object=none.
+	* NEWS: Updated.
+
+2004-09-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Remember that the ltmain.sh generated by bootstrap
+	is missing most of its substitution values, so force it to be
+	rebuilt at make time by touching $(top_srcdir)/config/ltmain.in.
+
+	From Martin Quinson <mquinson@ens-lyon.fr>
+	* m4/libtool.m4 (_LT_SETUP, _LT_ENABLE_LOCK, LT_PATH_LD): Use
+	AS_HELP_STRING to get rid of autoconf -Wobsolete warning
+	messages.
+	* m4/ltdl.m4 (LT_WITH_LTDL, _LT_ENABLE_INSTALL): Ditto.
+	* m4/ltoptions.m4 (_LT_ENABLE_SHARED, _LT_ENABLE_STATIC)
+	(_LT_ENABLE_FAST_INSTALL, _LT_WITH_PIC): Ditto.
+	* TODO: Updated
+
+2004-09-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/slist.c (slist_cons): Don't leak the tail of a list.
+
+2004-09-03  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* m4/libtool.m4 (_LT_ENABLE_LOCK): Reformatted.
+
+2004-09-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* HACKING: Explain how to verify detached signatures with gpg in
+	the release announcement templates.
+
+	* AUTHORS: Fix typo in my address.
+
+2004-09-02  Gary V. Vaughan  <gary@gnu.org>,
+
+	Builds of packages that use libtool and make -j produce "directory
+	already exists warnings" for .lib directory.  Build on automake
+	wisdom to support make -j builds where a suitable mkdir is
+	available:
+
+	* configure.ac (AM_INIT_AUTOMAKE): Require 1.9, which goes to some
+	trouble to find a $(mkdir_p) that doesn't interfere with make -j.
+	* Makefile.am (edit): Substitute for @mkdir_p@.
+	* config/ltmain.in (MKDIR_P): Take @mkdir_p@ value.
+	(mkdir): Removed.
+	(func_mkdir_p): New function to use $MKDIR_P.  Factor out all
+	previous mkdir calls to use this function.
+	(RM, MV): Declared as in libtoolize.in.  Changed all callers.
+	* libtoolize.in (MKDIR_P): Take @mkdir_p@ value from automake.
+	(func_mkdir_p): Use it, similarly to new config/ltmain.in.
+	* tests/defs: Synchronize boiler plate code with ltmain.in.
+	Adjust all callers.
+	Add missing copyright preamble.
+	* tests/demo-static.test: Add missing copyright preamble.
+	* NEWS: Updated.
+	Reported by Daniel Reed <n@ml.org>
+
+2004-09-02  Gary V. Vaughan  <gary@gnu.org>,
+
+	* Makefile.am (clean-ltmain-sh): Quote $(top_builddir) for the
+	shell, incase it is not set when running maintainer rules with
+	`make -fMakefile.maint'.
+	Don't show the shell commands.
+
+	* AUTHORS: Fix my email address.
+
+2004-09-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (try_dlopen): Fix memory leak.
+	* NEWS: Updated.
+
+2004-09-02  Gary V. Vaughan  <gary@gnu.org>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/slist.c, libltdl/slist.h: Merge in changes from latest
+	upstream.  Mostly comments, formal item boxing, a sort function,
+	and const madness reduction.
+	(slist_new): Removed.
+	(slist_box, slist_unbox, slist_sort): New.
+	(SListCompare, SListCallback): Swapped!
+	(slist_remove, slist_find): Change order of parameters for
+	orthogonality with slist_foreach.  Changed all callers.
+	* libltdl/lt_dlloader.c (loader_cmp): Renamed to...
+	(loader_callback): ...this.  Return boxed item.
+	(lt_dlloader_remove): Adjust to new loader_callback semantics;
+	unbox each removed item before returning.
+	Remove unused variable.
+	Remove const from name parameter, since the slist API cannot
+	guarantee userdata const-ancy for its callback functions.
+	(lt_dlloader_find): Adjust to new loader_callback semantics; need
+	to return the contents of the boxed item.
+	Remove const from name parameter, since the slist API cannot
+	guarantee userdata const-ancy for its callback functions.
+	* libltdl/lt_dlloader.h (lt_dlloader_find, lt_dlloader_remove):
+	Adjust to new constless footprint.
+	* libltdl/ltdl.c (ltdl_exit): The global `loaders' list is changed
+        by `lt_dlloader_remove' while cleaning up, so the address in local
+	variable `loader' is invalidated.  Since some loaders may be
+	resident modules that cannot be unloaded (though we have none
+	yet), we must save each `next' address before calling
+	`lt_dlloader_remove'.
+	* NEWS: Updated.
+	* THANKS: Added Ralf.
+
+2004-09-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/lt_dlloader.c (lt_dlloader_add): Handle malloc failure
+	from slist_new.
+	* libltdl/ltdl.c (loader_init): Trust lt_dlloader_add(), don't
+	overwrite its error type, and simplify.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+2004-09-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/slist.c (slist_new): Handle malloc failure gracefully.
+
+2004-09-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in, config/ltmain.in: Add CDPATH protection to
+	preamble.
+	* tests/defs: Put a full m4sh.m4 style 'Be Bourne compatible'
+	preamble in here too.
+	* HACKING: Note that tests/defs needs synching with m4sh.m4 too.
+	* TODO: Add new item.
+
+	* libltdl/ltdl.c (try_dlopen, lt_dlforeachfile): Use correct cpp
+	macro name, LT_DLSEARCH_PATH.
+
+	* libltdl/ltdl.c (lt_dlexit, tryall_dlopen): Fix gcc parentheses
+	warning.
+	(foreach_dirinpath, try_dlopen, lt_dlpath_insertdir): Fix gcc
+	signed vs unsigned warning.
+	Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+
+	* m4/libtool.m4 (_LT_PROG_LTMAIN): Simplified in light of
+	ltmain.sh no longer being in the build tree.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+2004-09-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/loaders/preopen.c: Initialise memory in get_vtable.
+
+	* tests/sh.test: Look in the source tree for ltmain.sh.
+
+2004-09-01  Gary V. Vaughan  <gary@gnu.org>
+
+	Don't use C99 flexible array types as we want to be C89
+	compatible.  Instead, revert to the old way of doing things with
+	an array of symbol name vs. address, and adding the originator as
+	the first symbol but with a NULL address:
+
+	* config/ltmain.in (func_extract_dlsyms): Store originator as a
+	NULL address symbol.
+	* libltdl/ltdl.h (lt_dlsymbol): Removed.
+	(lt_dlsymlist): Remove originator field.
+	(LTDL_SET_PRELOADED_SYMBOLS): Adjust.
+	* libltdl/loaders/preopen.c (vm_open, lt_dlpreload_open): Adjust
+	for new types.
+	(vm_sym): Skip the new originator symbol when scanning symbol
+	names.
+	* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Adjust preloaded symbols
+	test file to match.
+	* NEWS: Updated.
+	Reported by Andreas Schwab <schwab@suse.de>
+
+2004-09-01  Gary V. Vaughan  <gary@gnu.org>
+
+	Libtool currently assumes that certain characteristics, such as
+	enable_shared, apply to the host architecture rather than per-
+	language.  Running the tests over a broken compiler can corrupt
+	these values, when there is no C++ compiler for example, so we
+	skip most of the tests in those cases.
+
+	* m4/libtool.m4 (_LT_LANG_CXX_CONFIG): If caught_CXX_compiler was
+	set from configure.ac, then don't run all the compiler tests.
+	(_LT_LANG_F77_CONFIG): Similarly for caught_F77_compiler.
+
+2004-08-31  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (clean-ltmain-sh): Remove stale config/ltmain.sh
+	from the build tree that were left behind by previous versions of
+	libtool.
+	($top_srcdir)/stamp-vcl: Since this rule is already called on
+	every invocation of make, hook clean-ltmain-sh in here too.
+	Suggested by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+2004-08-31  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* bootstrap: Update warning message to reflect having split
+	libtool.m4 into several files.
+	Also, add config/ltmain.sh to list of stale files from previous
+	versions to be removed before bootstrap.
+
+	* libltdl/ltdl.c: Replace strdup with lt__strdup.
+
+2004-08-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.in: Double quote even $# for the sake of sh.test.
+	(exec_cmd): Be careful about "`\"foo\"`" quoting, even in comments
+	to avoid triggering the tests in sh.test.
+
+	* configure.ac:  Because of the way the autoconf C++ testing
+	works, we need to call the C test first to work in an environment
+	that has no C++ compiler.
+
+	* libltdl/lt_dlloader.c (lt_dlloader_remove): Since the return
+	value of this function is often passed to free, don't declare it
+	`const'. Responsibility for this memory is given back to the
+	caller on return.
+	* libltdl/lt_dlloader.h (lt_dlloader_remove): Ditto.
+	* libltdl/ltdl.c (lt_dlexit): Adjust.
+	* NEWS: Updated.
+
+2004-08-30  Andreas Schwab  <schwab@suse.de>
+
+	* libltdl/ltdl.c (lt_dlexit): Remove lvalue cast.
+
+	* libltdl/slist.h (SListCallback): Fix missing type.
+
+	* config/ltmain.in: Accept --mode=relink.
+
+2004-08-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS: Updated.
+	* configure.ac: Bumped version to 1.9c.
+
+	GNU libtool 1.9b was released.
+
+	* configure.ac: Bumped version to 1.9b.
+	* NEWS: Updated.
+	* INSTALL, config/config.guess, config/config.sub,
+	config/texinfo.tex: Updated from canonical source.
+	* Makefile.maint, HACKING: Update instructions for releasing in a
+	VPATH build.
+
+	* Makefile.am (dist-hook): Only run if README-alpha exists.
+	* README.alpha: Renamed from README-alpha to stop automake from
+	automatically adding it to DIST_COMMON.
+
+	* NEWS: Merge changes from branch-1-5.
+
+	* Makefile.am (dist-hook): Always distribute just a README file,
+	but take its contents from README-alpha for alpha releases.
+
+	* TODO: Reformat.  Removed some items that have been implemented.
+
+2004-08-29  Gary V. Vaughan  <gary@gnu.org>
+
+	Add a new `-weak' flag to tell libtool when not to propogate
+	dependency libraries from dlpreopened modules to libraries:
+
+	* config/ltmain.in: Support new -weak link mode option.  Adjust
+	help message.
+	* libltdl/Makefile.am (libltdlc_la_LDFLAGS): Use it.
+	* doc/libtool.texi (Linking with dlopened modules): Document it.
+	(Link mode): Mention -weak.
+	* NEWS: Updated.
+
+2004-08-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* config/ltmain.in (opt_help): Defer showing help messages until
+	after a possible following --mode argument has been parsed, so we
+	can handle `libtool --help --mode=foo'.
+
+2004-08-29  Gary V. Vaughan  <gary@gnu.org>
+
+	We have had shell functions in ltmain.in for a few years without
+	complaint now, and recently a few more have crept in.  Make a
+	start at refactoring the code with shell functions, and
+	standardising on option parsing style:
+
+	* config/ltmain.in (func_echo, func_verbose, func_error)
+	(func_fatal_error, func_fatal_help, func_missing_arg)
+	(func_version, func_usage, func_help): Boiler plate shell
+	functions mostly copied from libtoolize.in.  Changed *lots* of
+	shell snippets to call these functions as appropriate, rather than
+	inlining the same code over and over.
+	(func_config, func_features, func_enable_tag, func_mode_help):
+	Factored out from the shared option parsing loop.  Write a new
+	shared option parser based on the one in libtoolize.in.
+	(func_check_version_match): Factored out from global scope.
+	(func_mode_compile, func_mode_execute, func_mode_finish)
+	(func_mode_install, func_mode_link, func_mode_uninstall): Break
+	each of the top level mode handlers out into a function.  Adjust
+	main loop.
+	(modename, prevopt, prev, optarg, show_help): Removed in the
+	course of cleaning up the shared option parser.
+	(opt_duplicate_deps): Use `:' and `false' instead of `yes' and `',
+	so we can run it directly, rather than calling test.
+
+2004-08-28  Gary V. Vaughan  <gary@gnu.org>
+
+	To help users submit better bug reports, improve the general
+	instructions, and provide additional useful info alongside the bug
+	reporting address in --help output:
+
+	* Makefile.am (edit): Substitute $host_triplet.
+	* libtoolize.in: Output useful debug info with --help.
+	* config/ltmain.in: Ditto.
+	* README: Rewritten.  Added copyright info.
+	* README-alpha: Rewritten.  Added copyright info.
+	* HACKING: New file, partly taken from old README-alpha.
+
+2004-08-27  Gary V. Vaughan  <gary@gnu.org>
+
+	Two things to stop `make distcheck' from trying to rebuild
+	distributed files (m4/ltversion.m4 and config/ltmain.in) in the
+	readonly source tree:
+
+	* Makefile.am (stamp-vcl): Keep only one copy of stamp-vcl; in
+	$(top_srcdir), so that an up-to-date version is rolled into the
+	dist tarball even from a VPATH build.
+	($(top_srcdir)/config/ltmain.sh): Don't depend on Makefile,
+	otherwise ltmain.sh needs to be rebuilt after every config.status
+	run, and then configure needs to be rebuilt, and it all goes
+	horribly wrong :-/  Unfortunately, we can't depend on Makefile.am
+	either, because that is a circular dependency.  The downside of
+	this change is that it is now possible to edit Makefile.am to
+	change the way ltmain.sh is generated, and the dependency
+	information can't tell that ltmain.sh needs regenerating.
+
+2004-08-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (Cheap tricks): Escape the `@' for texinfo.
+
+2004-08-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (Cheap tricks): Fix the instructions for making
+	a ltmain.in wrapping libtool in light of recent changes to the
+	version checking code.
+
+2004-08-26  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.in [darwin]: Use the -dylib_file flag and avoid
+	linking to so many libraries on darwin.
+
+	* m4/libtool.m4 [darwin]: Don't use a libname triplet, a couplet
+	is perfectly fine.
+
+	* m4/ltdl.m4: Don't use the dyld loader on darwin 8 or later.
+
+2004-08-25  Paolo Bonzini  <bonzini@gnu.org>
+
+	* config/ltmain.in (piecewise linking): Use a GNU ld script if
+	possible.
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS): Add per-tag variable
+	with_gnu_ld.
+	(_LT_LANG_CXX_CONFIG): Don't set unused variable with_gnu_ldcxx.
+
+2004-08-22  Gary V. Vaughan  <gary@gnu.org>
+
+	The Grand Renaming.  In preparation for libtool-2.0, move all of
+	the many and varied m4 symbols accumulated by libtool over the
+	years, considering also that modern autoconf can detect unexpanded
+	macros even without AC in the macro name:
+
+	* bootstrap: Remove libltdl/config.h from previous releases.
+	* m4/libtool.m4, m4/ltdl.m4, doc/libtool.texi: Basically, run a
+	giant sed transformation like this:
+	s,AC_LIB_LTDL,LTDL_INIT,g
+	s,AC_LIBLTDL_CONVENIENCE,LTDL_CONVENIENCE,g
+	s,AC_LIBLTDL_INSTALLABLE,LTDL_INSTALLABLE,g
+	s,AC_WITH_LTDL,LT_WITH_LTDL,g
+	s,AC_LTDL_ENABLE_INSTALL,_LT_ENABLE_INSTALL,g
+	s,AC_DEPLIBS_CHECK_METHOD,_LT_CHECK_MAGIC_METHOD,g
+	s,AC_LIBTOOL_OBJDIR,_LT_CHECK_OBJDIR,g
+	s,AC_LTDL_OBJDIR,_LT_CHECK_OBJDIR,g
+	s,AC_LTDL_DLPREOPEN,_LT_CHECK_DLPREOPEN,g
+	s,AC_LIBTOOL_SYS_MAX_CMD_LEN,LT_CMD_MAX_LEN,g
+	s,AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE,_LT_CMD_GLOBAL_SYMBOLS,g
+	s,AC_LIBTOOL_SYS_OLD_ARCHIVE,_LT_CMD_OLD_ARCHIVE,g
+	s,AC_PROG_LD_RELOAD_FLAG,_LT_CMD_RELOAD,g
+	s,AC_LIBTOOL_SYS_LIB_STRIP,_LT_CMD_STRIPLIB,g
+	s,AC_CHECK_LIBM,LT_LIB_M,g
+	s,AC_LTDL_DLLIB,LT_LIB_DLLOAD,g
+	s,AC_LIBTOOL_COMPILER_OPTION,_LT_COMPILER_OPTION,g
+	s,AC_LIBTOOL_PROG_CC_C_O,_LT_COMPILER_C_O,g
+	s,AC_LIBTOOL_PROG_COMPILER_NO_RTTI,_LT_COMPILER_NO_RTTI,g
+	s,AC_LIBTOOL_PROG_COMPILER_PIC,_LT_COMPILER_PIC,g
+	s,AC_LIBTOOL_SYS_HARD_LINK_LOCKS,_LT_COMPILER_FILE_LOCKS,g
+	s,AC_LTDL_DLSYM_USCORE,LT_FUNC_DLSYM_USCORE,g
+	s,AC_LIBTOOL_LINKER_OPTION,_LT_LINKER_OPTION,g
+	s,AC_LIBTOOL_PROG_LD_SHLIBS,_LT_LINKER_SHLIBS,g
+	s,AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH,_LT_LINKER_HARDCODE_LIBPATH,g
+	s,AC_PATH_MAGIC,_LT_PATH_MAGIC,g
+	s,AC_PATH_TOOL_PREFIX,_LT_PATH_TOOL_PREFIX,g
+	s,AC_PROG_LD,LT_PATH_LD,g
+	s,AC_PROG_LD_GNU,_LT_PATH_LD_GNU,g
+	s,AC_PROG_NM,LT_PATH_NM,g
+	s,AC_LTDL_SYS_DLOPEN_DEPLIBS,LT_SYS_DLOPEN_DEPLIBS,g
+	s,AC_LIBTOOL_DLOPEN_SELF,LT_SYS_DLOPEN_SELF,g
+	s,AC_LIBTOOL_POSTDEP_PREDEP,_LT_SYS_HIDDEN_LIBDEPS,g
+	s,AC_LTDL_SYSSEARCHPATH,LT_SYS_DLSEARCH_PATH,g
+	s,AC_LTDL_SHLIBEXT,LT_SYS_MODULE_EXT,g
+	s,AC_LTDL_SHLIBPATH,LT_SYS_MODULE_PATH,g
+	s,AC_LTDL_SYMBOL_USCORE,LT_SYS_SYMBOL_USCORE,g
+	s,AC_LIBTOOL_SYS_DYNAMIC_LINKER,_LT_SYS_DYNAMIC_LINKER,g
+	s,_LT_AC_TAGVAR,_LT_TAGVAR,g
+	s,_LT_AC_SYS_COMPILER,_LT_TAG_COMPILER,g
+	s,_LT_AC_PROG_ECHO_BACKSLASH,_LT_PROG_ECHO_BACKSLASH,g
+	s,_LT_AC_SYS_LIBPATH_AIX,_LT_SYS_MODULE_PATH_AIX,g
+	s,_LT_AC_SHELL_INIT,_LT_SHELL_INIT,g
+	s,_LT_AC_LOCK,_LT_ENABLE_LOCK,g
+	s,_LT_AC_CHECK_DLFCN,_LT_HEADER_DLFCN,g
+	s,_LT_AC_TRY_DLOPEN_SELF,_LT_TRY_DLOPEN_SELF,g
+	s,LT_AC_PROG_EGREP,_LT_DECL_EGREP,g
+	s,LT_AC_PROG_SED,_LT_DECL_SED,g
+	* doc/libtool.texi (Autoconf macros): Document exported macros.
+	* libtoolize.in: Compare ltdl.m4 serial numbers for LTDL_INIT
+	instead of newly obsoleted AC_LIB_LTDL.
+	(func_scan_files): Also set seen_ltdl for LTDL_INIT and
+	LT_WITH_LTDL.
+
+2004-08-12  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 [GNU/linux] (AC_DEPLIBS_CHECK_METHOD): Cleanup,
+	thanks to Daniel Reed.
+
+2004-08-11  Daniel Reed  <djr@redhat.com>
+
+	* tests/demo-nopic.test: Do not run on x86_64 or s390*
+
+2004-08-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (lt_dlforeachfile): LT_SYS_LIBSEARCH_PATH is not
+	an environment variable, it is an actual path.
+
+	* bootstrap: Remove `-f Makefile.am' now that we have an actual
+	Makefile to build ltmain.sh.
+	Reported by Noah Mish <noah@cs.caltech.edu>
+
+2004-08-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Run the bootstrap rules from a file named Makefile,
+	copied from Makefile.am for fresh checkouts.
+
+2004-08-05  Alexandre Duret-Lutz  <adl@gnu.org>
+
+	* m4/libtool.m4 (_LT_PROG_LTMAIN): Require ltmain.sh using
+	using Autoconf's new AC_REQUIRE_AUX_FILE.
+
+2004-08-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am ($(top_srcdir)/config/ltmain.sh): Depends on
+	Makefile.
+	(timestamp): Factor out timestamp setting and edit it based on the
+	version number, so that it is empty for release versions.
+	($(top_srcdir)/config/ltmain.sh): Use it.
+	(libtoolize): Ditto.
+
+	* Makefile.am (libtool): Depends on ltmain.sh.
+	(libtoolize): Set and substitute TIMESTAMP.
+
+	* Makefile.am ($(top_srcdir)/config/ltmain.sh): Actually run
+	$(MKSTAMP) before changing directories, or it won't be found.
+	Forgot to save before my last commit :-(
+
+	* Makefile.am ($(top_srcdir)/m4/ltversion.m4): Since we already did
+	`cd $(top_srcdir)' for this rule, we can't mv ltversion.tmp to the
+	relative $(top_srcdir) again!  Also, run $(MKSTAMP) before changing
+	directories, or it won't be found.
+	($(top_srcdir)/config/ltmain.sh): Ditto.
+	(EXTRA_DIST): We should distribute ltversion.m4 too.
+
+2004-08-04  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Since CONFIG_SHELL may
+	not actually be set, we should use SHELL here, also make darn sure
+	that SHELL is set to something. Bug from Willem Jan Palenstijn
+	<wpalenst@math.leidenuniv.nl>.
+
+2004-08-03  Jacob Meuser  <jakemsr@jakemsr.com>
+
+	* ltmain.in: Allow some static libraries to be used in generating a
+	shared library on NetBSD and OpenBSD. match-pattern_regex decides
+	which are good.
+
+2004-08-02  Geoffrey Keating  <geoffk@apple.com>
+
+	* m4/libtool.m4 [darwin]: Don't use -all_load.
+
+2004-08-01  Maciej W. Rozycki  <macro@linux-mips.org>
+
+	* m4/libtool.m4 (LT_AC_PROG_SED): Set SED when running from cache as
+	well.
+
+2004-07-31  Gary V. Vaughan  <gary@gnu.org>
+
+	Although libtool is optimised to not need to subconfigure libltdl,
+	the installed libltdl sources for libtoolize need to put
+	libltdl/configure.ac in the parent package so that *it* can
+	subconfigure libltdl.  That way we don't put any constraints on
+	the build system used by the parent package because the
+	libtoolized libltdl subtree is a self-contained sub-project:
+
+	* libltdl/Makefile.am (EXTRA_DIST): Add configure.ac.
+	(nobase_ltdldata_DATA): Change back to libltdl's own
+	configure.ac.
+
+2004-07-30  Gary V. Vaughan  <gary@gnu.org>
+
+	My thanks to Alexandre Duret-Lutz <adl@gnu.org> for the insight
+	required to write this changeset -- especially that ltmain.sh is
+	the same on any machine for a given release, which I hadn't
+	noticed for some bizarre reason: It turns out that generating
+	distributed files from configure causes no end of hassle, as
+	evidenced by the many patches I've generated over the last few
+	days to try and get the dist and distcheck make rules to work.
+	Instead of all that hair, we now simply generate our distributed
+	files (now including ltmain.sh) with make rules -- and since
+	automake creates make variables for all AC_SUBSTs, that is really
+	easy.  The code looks a lot more like automake and autoconf
+	Makefile.ams now, and doesn't have all the rough edges the earlier
+	hacky solution suffered from.  We still generate libtool from
+	config.status, but that is not a distributed file, and doesn't
+	break the golden rule.  Besides, there is way more going on there
+	than a bunch of substitutions:
+
+	* Makefile.am (edit): New common sed substitutions for files now
+	generated by make instead of config.status.
+	(CLEANFILES): Clean new tmp files.
+	(EXTRA_DIST): Add ltmain.sh.
+	(vcl-tmp): Reinstated.
+	(m4/ltversion.m4, config/ltmain.sh): New rules.  Generate from
+	here instead of config.status.
+	(libtoolize): Ditto.
+	(libtool): Call config.status to regenerate if necessary.
+	(dist-hook): Removed.
+	* config/ltmain.in: Moved here from top_srcdir.
+	* README-alpha: Update instructions to check AS_SHELL_SANITIZE is
+	up to date.
+	* bootstrap: Rewritten.  Generate m4/ltversion.m4 and
+	config/ltmain.sh because configure depends on them.
+	* configure.ac (AC_CONFIG_SRCDIR): Use libtoolize.in now that
+	ltmain.in has moved.
+	(AC_CONFIG_FILES): Don't generate distributed files,
+	config/ltmain.sh and libtoolize from config.status.  We have make
+	rules to do that now.
+
+2004-07-30  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4, ltmain.in: readd the comments that I erased.
+
+	* ltmain.in [darwin]: We already had a module var, there can be
+	only one.
+
+	* m4/libtool.m4, ltmain.in: autoconf now says the best thing to do
+	with CDPATH is to (unset CDPATH) >/dev/null 2>&1 && unset CDPATH,
+	so do it.
+
+2004-07-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am ($(top_srcdir)/config/ltmain.sh): Ugh. More hair to
+	help `make distcheck'; not only do we have to make a copy of
+	ltmain.sh available in the source tree, but we have to be really
+	careful about permission bit twiddling when we copy it across into
+	the possible read-only $(top_srcdir)/config directory!
+
+	* tests/tagtrace.test: Skip this test when running a VPATH build
+	against a read-only source tree (as in distcheck for example),
+	since autoconf wants to write temporary files in $top_srcdir
+	otherwise.
+
+	* Makefile.am ($(top_srcdir)/config/ltmain.sh): Automake assumes,
+	quite rightly for every project except libtool, that there will be
+	an ltmain.sh in the source tree.
+	(EXTRA_DIST): As do the dist rules it generates.
+	(dist-hook): Even though we definitely don't want to distribute
+	our local ltmain.sh.
+
+	* config/config.guess, config/config.sub: Don't check these in,
+	they cause spurious conflicts on cvs commit and update, and are
+	added by bootstrap in any case.
+
+	* configure.ac (AC_INIT): Revert an accidental commit from my
+	testing of package_revision.
+
+2004-07-29  Alexandre Duret-Lutz  <adl@gnu.org>
+
+	* doc/libtool.texi (Tags): Document CC.
+	* m4/libtool.m4 (_LT_SETUP): Register CC as supported tag so that
+	Automake uses it.
+
+2004-07-28  Gary V. Vaughan  <gary@gnu.org>
+
+	Fix a long-standing bug where macro_version was always empty in
+	the generated m4/ltversion.m4.  Except for CVS revisions:
+
+	* ltmain.in (package_revision): Don't try to deduce it from
+	TIMESTAMP, since that is empty for release versions; simply
+	substitute it...
+	* configure.ac (package_revision): ...from here, having
+	precalculated it before resetting TIMESTAMP for release versions.
+	* bootstrap: Force regeneration of m4/ltversion.m4, but retain
+	timestamps if there is no change to the content.
+
+2004-07-28  Gary V. Vaughan  <gary@gnu.org>
+
+	To take full advantage of this, libtool must be bootstrapped with
+	CVS autoconf, otherwise pdksh chokes on some nested escaped quotes
+	from libtool.m4.  Using CVS autoconf protects configure from
+	non-bourne compatible shells in the same way this changeset
+	protects libtool and libtoolize:
+
+	* libtoolize.in: Include latest CVS autoconf AS_SHELL_SANITIZE
+	expansion to make various shells fully bourne compatible.
+	* ltmain.in: Ditto.
+	* m4/libtool.m4 (AC_PATH_TOOL_PREFIX): Remove spurious quotes, the
+	RHS of = assignment is not IFS split.
+	(_LT_LANG_CXX_CONFIG): Ditto.
+	(AC_LIBTOOL_POSTDEP_PREDEP): Ditto.
+
+2004-07-27  Gary V. Vaughan  <gary@gnu.org>
+
+	This change fixes another VPATH build bug, where the vcl.tmp
+	target forced a rebuild of stamp-vcl in the build tree (and
+	hence regeneration of m4/ltversion.m4, thus an automake driven
+	rebootstrap that doesn't know about $fakes) requiring a fresh
+	./bootstrap after every cvs/tla update:
+
+	* Makefile.am (vcl.tmp): Removed.
+	(stamp-vcl): Adopt former vcl.tmp target rules.
+
+2004-07-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in: Make sure that dependency libraries of -dlpreopened
+	libraries are propogated properly.
+
+2004-07-23  Joe Orton  <joe@manyfish.co.uk>
+
+	* libtool.m4: Treat bsdi5* like bsdi4*.
+
+2004-07-22  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in [darwin](func_extract_archives): $SED not sed.
+
+	* ltmain.in [darwin](func_extract_archives): Clean up last commit
+	a little, some suggestions are from Albert Chin, those that are
+	broken are mine.
+
+	* libltdl/Makefile.am, libltdl/loaders/Makefile.am: Look for
+	included files in the right places.
+
+2004-07-18  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in [darwin](func_extract_archives): Because fat archives
+	on darwin can not be extracted using ar, we need to use lipo to
+	extract the thin archives and then use lipo again to generate the
+	individual fat objects. This should allow people to run configure
+	with CC set to "cc -arch ppc -arch ppc64" or "cc -arch ppc -arch
+	i386" or whatever to match the toolchain they have available.
+
+2004-07-18  Greg Eisenhauer  <eisen@cc.gatech.edu>
+
+	* libltdl/loaders/Makefile.am: Use AM_MAKEFLAGS not MAKEFLAGS.
+
+2004-07-18  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/Makefile.am: Ensure that lt__dirent.h is part of the dist,
+	also make failed looking for configure.ac, look for
+	$(top_srcdir)/configure.ac instead.
+
+2004-07-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/lt__private.h (lt_dlhandle_struct): Renamed to
+	lt__handle to better reflect the naming scheme.
+	* libltdl/ltdl.h (lt_dlhandle): Be truly opaque with a void *.
+	* libltdl/lt_dlloader.c (lt_dlloader_remove): Party to
+	lt__private.h, so use internal lt__handle instead of opaque
+	lt_dlhandle.
+	* libltdl/ltdl.c (LT_DLGET_FLAG, LT_DLSET_FLAG): Add a cast to
+	internal lt__handle type.
+	(try_dlopen, tryall_dlopen, load_deplibs, unload_deplibs): Ditto.
+	(lt_dlexit, lt_dlclose, lt_dlsym): Use lt__handle to iterate
+	throught the handle list.
+	(try_dlopen): Use lt__zalloc instead of MALLOC and memset.
+	* libltdl/ltdl.h (lt_dlcaller_id): Be truly opaque with a void *.
+	(lt_dlhandle_interface): New callback type for filtering handles
+	according to the interface they present.
+	* libltdl/ltdl.c (lt_dlcaller_register): Take an id and an
+	interface check callback, and generate a caller_id.
+	(iterator): New static variable for the use of...
+	(lt_dlhandle_first): New function.  Set the iterator for
+	subsequent calls to lt_dlhandle_next.
+	(lt_dlhandle_next): Either work as before when iterator is unset,
+	or else skip handles that fail the interface check in iterator set
+	by lt_dlhandle_first.
+	* libltdl/ltdl.h (lt_dlhandle_first): Declaration.
+	* doc/libtool.texi (User defined module data): Document the new
+	APIs.
+	* NEWS: Updated.
+
+2004-07-15  Gary V. Vaughan  <gary@gnu.org>
+
+	Split lt_dlloader management into a separate file, and factor
+	`loaders' list management into a new SList ADT.  In the process,
+	the API for writing loaders is a little cleaner, so all the
+	existing loaders were tweaked to take advantage of that:
+
+	* libltdl/slist.h, libltdl/slist.c: New files implementing a
+	generic singly linked list container ADT.  The ADT is purely
+	internal, and none of its API's are visible from an installed
+	libltdl.
+	* libltdl/lt_dlloader.h (lt_dlloader): Removed next field again
+	:-) Renamed to lt_dlvtable for API.  Changed all callers.
+	(lt_dlloader_get): New function to turn an lt_dlloader into its
+	associated lt_dlvtable.
+	(lt_dlloader_add): Removed unused data parameter.  The caller
+	data belongs to (and is set by) the loader itself, not the
+	loader's client.  Changed all callers.
+	(lt_dlloader_name, lt_dlloader_data): Removed.  Use
+	lt_dlloader_get instead!
+	* libltdl/lt__private.h: Include slist.h.
+	(lt__alloc_die_callback): Add missing LT_SCOPE to declaration.
+	(lt_dlhandle_struct): Use lt_dlvtable instead of opaque
+	lt_dlloader.
+	* libltdl/ltdl.c (lt_dlexit): Rewritten for the new loader API.
+	(loaders, lt_dlloader_add, lt_dlloader_remove, lt_dlloader_next,
+	lt_dlloader_find): Moved from here...
+	* libltdl/lt_dlloader.c ((loaders, lt_dlloader_add,
+	lt_dlloader_remove, lt_dlloader_next, lt_dlloader_find): ...to
+	here.  And rewritten in terms of new SList interface.
+	* libltdl/ltdl.c (lt_dlexit, tryall_dlopen): Rewritten in terms of
+	new lt_dlloader interface.
+	* libltdl/Makefile.am (libdlloader_la_SOURCES): Add slist.h and
+	slist.c.  Move lt_dlloader.h from here...
+	(pkginclude_HEADERS): ...to here.
+	(libltdl_la_SOURCES): Add lt_dlloader.c and lt_dlloader.h.
+
+2004-07-15  Gary V. Vaughan  <gary@gnu.org>
+
+	Collapse two almost identical structures into one:
+
+	* libltdl/lt_dlloader.h (lt_dlloader): Add next field.
+	* libltdl/ltdl.c (lt_user_dlloader): Remove entirely.  Change all
+	callers to use lt_dlloader instead.  Add a compatibility macro.
+	(lt_dlloader_add): Remove copy and allocate stage, just hook
+	directly into the loaders list.
+
+2004-07-15  Gary V. Vaughan  <gary@gnu.org>
+
+	A cleaner way to access the private fields of an lt_dlhandle
+	than my move of the module field into lt_dlinfo:
+
+	* libltdl/ltdl.c (lt_caller_data, lt_dlhandle_struct): Move from
+	here...
+	* libltdl/lt__private.h (lt_caller_data, lt_dlhandle_struct):
+	...to here.  And put the module field back here...
+	* libltdl/ltdl.h (lt_dlinfo): ...instead of here.
+	* libltdl/loaders/loadlibrary.c (vm_open): Adjust.
+
+2004-07-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/lt__private.h (streq, strneq): New macros to make strcmp
+	calls as used for simple comparison easier to read.
+	* libltdl/loaders/dyld.c, libltdl/loaders/preopen.c,
+	libltdl/ltdl.c: Use them!
+
+2004-07-15  Gary V. Vaughan  <gary@gnu.org>
+
+	This pervasive changeset makes two intertwined deep changes to the
+	operation of libtool (neither would work alone).  First, there is
+	a new feature that allows libraries to preopen modules.  This
+	entails a backwards incompatible change to the libltdl API for
+	separating out the preloaded symbol lists by owner.  Second, in
+	the tradition of "eating our own dogfood", libltdl now preloads
+	its own dlloaders.  The internal API for dlloaders has also had to
+	change in a backwards incompatible way in support of the new
+	library preloading feature.  If you don't use preloaded libraries,
+	you needn't change your project sources, though you will need to
+	recompile against the new libltdl.  The API changes are mostly
+	confined to dlloaders, so you probably needn't worry about those
+	(unless you have written a custom loader that you want libltdl to
+	use):
+
+	* configure.ac (AC_CONFIG_FILES): Add libltdl/loaders/Makefile.
+	* libltdl/configure.ac (AC_CONFIG_FILES): Add loaders/Makefile.
+	* libltdl/loaders: New directory for module loaders, to simplify
+	Makefile rules, and to give the loaders themselves names that are
+	unique in the first few characters.
+	* libtoolize.in (func_copy_all_files): Copy recursively to pick up
+	the loaders directory contents.
+	* libltdl/loaders/Makefile.am: New file.  Move module building
+	rules to here...
+	* libltdl/Makefile.am: ...from here.
+	(VERSION_INFO): Bumped version info to signify interface changes.
+	(libltdl_la_CPPFLAGS, libltdlc_la_CPPFLAGS): Set LTDLOPEN
+	appropriately for each library.
+	* libltdl/loader-dld_link.c, libltdl/loader-dlopen.c,
+	libltdl/loader-dyld.c, libltdl/loader-load_add_on.c,
+	libltdl/loader-loadlibrary.c libltdl/loader-preopen.c,
+	libltdl/loader-shl_load.c: Moved from here...
+	* libltdl/loaders/dld_link.c, libltdl/loaders/dlopen.c,
+	libltdl/loaders/dyld.c, libltdl/loaders/load_add_on.c,
+	libltdl/loaders/loadlibrary.c libltdl/loaders/preopen.c,
+	libltdl/loaders/shl_load.c: ...to here.
+	(get_vtable): New entry function for each.
+	* libltdl/loaders/preopen.c (lt_dlsymlists_t): Replaced by...
+	(symlist_chain): ...a new structure which maps lists of preloaded
+	symbols from the object that loads them.
+	(lt_dlpreload_open): New function to automatically open all
+	preloaded modules belonging to a named object (ORIGINATOR).
+	* libltdl/lt__alloc.c (lt__zalloc): New function to return a block
+	of zeroed out new memory.
+	* libltdl/lt__alloc.h (lt__zalloc): Prototype it.
+	* libltdl/lt__private.h (lt__alloc_die_callback): Add missing
+	prototype.
+	(lt__error_strings): Make this opaque to callers.
+	* libltdl/lt_error.c (lt__error_strings): Move the implementation
+	to here.
+	* libltdl/lt_dlloader.h (lt_user_dlloader): Add extra fields to
+	make originator focused preloading possible.  *BREAKS BACKWARDS
+	COMPATIBILITY*
+	(lt_dlloader_add): Take advantage of new fields to simplify
+	paramater list.
+	* libltdl/lt_system.h (LT_STR): New ANSI stringification macro.
+	(LT_CONC): Fix it to work from within macros.
+	* libltdl/ltdl.c (loader_init, loader_init_callback): Simplify
+	dlloader loading.
+	(get_vtable, preloaded_symbols): Point these at the preopen.c
+	symbols to bootstrap the loader chain.
+	(lt_dlinit): Load the preopen dlloader manually, and then use it
+	to load any other preloaded dlloaders.
+	(lt_dlloader_add): Simplify parameter list. Populate new
+	fields. Chain new loaders according to priority field.
+	* libltdl/ltdl.h (lt_dlsymlist): Add a new originator field.
+	(lt_dlpreload_callback_func): Type of a callback for automatic
+	lt_dlpreload_open loading.
+	(LTDL_SET_PRELOADED_SYMBOLS): Adjust to hook into preloaded
+	symbols from the "@PROGRAM@" originator.
+	* tests/demo/dlmain.c (main): Use mangled preloaded_symbols symbol.
+	* tests/pdemo/longer_file_name_dlmain.c (main): Ditto.
+	* ltmain.in: Don't spew spurious warnings when dlopening and
+	dlpreopening modules.
+	(func_generate_dlsyms): Factored out from multiple copies in the
+	rest of the code. Generate originator keyed symbol lists.
+	(func_extract_archives): Also factored.  Extract the contents of
+	convenience archives for linking with dependent libraries when
+	--whole-archive is not available.
+	[darwin]: Don't try to link $old_library unless it exists, and
+	$lib is a bundle.
+	* m4/ltdl.m4 (AC_LTDL_DLLIB): Check for all possible dynamic
+	loading libraries/apis rather that stopping when an acceptable one
+	is discovered.
+	(LT_DLLOADERS): New variable for holding dlloaders that can be
+	preloaded.
+	* doc/libtool.texi: Document interface changes.
+	* NEWS: Updated.
+
+2004-07-12  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 [darwin]: Set whole_archive_flag_spec to '' for xlc,
+	or it does not pass it's tests. xlc passes -noall_load (the default)
+	and when -all_load is also specified Apple's /usr/bin/libtool barfs
+	and dies.
+
+2004-07-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.h (lt_dlinfo): Move private module field to here...
+	* libltdl/ltdl.c (lt_dlhandle_struct): ...from here.  Changed all
+	callers.
+	* libltdl/loader-loadlibrary.c (sys_wll_open): Use new inteface to
+	scan loaded handle->info.module fields for previously loaded
+	modules.
+	* doc/libtool.texi (User defined module data): Document changes to
+	the interface.
+	* NEWS: Updated.
+	Reported by Chuck Wilson <cwilson@ece.gatech.edu>
+
+2004-07-07  Brad  <brad@comstyle.com>
+
+	* m4/libtool.m4: Fixes for the OpenBSD support
+
+2004-06-24  Noah Misch  <noah@cs.caltech.edu>
+
+	* ltmain.in: Unset the zsh GLOB_SUBST option, which makes zsh
+	handle backslash quoting poorly, before doing anything else.
+	* tests/defs: Likewise.
+
+2004-06-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in (libtoolize_flags): With the --ltdl option, we
+	libtoolize the libltdl subdirectory automatically.
+	* m4/ltdl.m4 (AC_WITH_LTDL): Fix overquoted args.
+
+2004-06-21  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in (dependency_libs) [darwin]: Remove -framework stuff from
+	dependency_libs. Instead, invent a new .la var "inherited_linker_flags"
+	to keep any linker flags which should be used when linking the library,
+	but are outside the usual -L -l, -R etc that can be used in
+	dependency_libs. Any unusual flags in dependency_libs cause recent
+	versions of libtool to die with "cannot find the library `'", so
+	it is required to move frameworks out of there. :(
+
+2004-06-21  Gary V. Vaughan  <gary@gnu.org>
+
+	From Ralf Wildenhues <Ralf.Wildenhues@gmx.de>:
+	* libtoolize.in: Quote $# to make sh.test happy again.
+
+	* m4/ltdl.m4 (AC_WITH_LTDL): Remove redundant AC_REQUIRE calls.
+	Either set variables to allow a client to link with the installed
+	libltdl, or else compile a local libltdl as a convenience library.
+	* libtoolize.in (opt_ltdl): Removed in favour of...
+	(ltdldir): ...this, which is defaulted to "libltdl" or can be set
+	by the user with an argument to --ltdl.
+	(Main): Use it!
+	* doc/libtool.texi (Distributing libltdl): Improved documentation
+	on libltdl.
+	(Invoking libtoolize): Document new optional --ltdl target
+	directory argument.
+
+2004-06-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS) [darwin*]: Fix a typo
+	in allow_undefined_flag: s,${Wl},${wl},g
+
+	* libtoolize.in (func_scan_files): Accept AC_WITH_LTDL as an
+	indication that libltdl is being used.
+	(Main): Without AC_CONFIG_MACRO_DIR, don't just dump all the
+	macro files in `.' since they are never used, and aclocal will
+	copy them from $aclocaldir into aclocal.m4 anyway.
+	Reported by Alexandre Duret-Lutz <adl@gnu.org>
+
+2004-06-16  Brad  <brad@comstyle.com>
+
+	* m4/libtool.m4: More improvements to OpenBSD support.
+	* NEWS: Updated.
+
+2004-06-16  Gary V. Vaughan  <gary@gnu.org>
+
+	libltdl uses LIBOBJS, which leak out into a parent project if both
+	share the same configure.ac.  Libtool itself doesn't compile any
+	code, so it is okay to do it during bootstrap, but other projects
+	need to treat libltdl as a configurable subproject to keep their
+	respective LIBOBJS separate:
+
+	* libltdl/configure.ac: New file, based on configure.ac.
+	* libltdl/Makefile.am (AC_LOCAL_AMFLAGS): Use our own m4
+	directory.
+	(ltdldata_DATA): List *all* the files that libtoolize --ltdl will
+	install.
+
+2004-06-16  Gary V. Vaughan  <gary@gnu.org>
+
+	Automake 1.9 won't have the AC_PROG_EGREP bug (aclocal used to
+	pull an old installed libtool.m4 as well as the bootstrap
+	m4/libtool.m4 if an AC_DEFUN was removed), and we have
+	lt~obsolete.m4 to work around it in the mean time.  libtoolize
+	can install macro files from $prefix/share/aclocal perfectly well
+	without us needing to move to a whole other directory:
+
+	* Makefile.am (pkgmacro_DATA): Renamed to aclocal_DATA, so m4
+	files are installed to $prefix/share/aclocal again.
+	(install-data-local): Don't remove just installed macros!
+	* libtoolize.in (pkgmacrodir): Renamed to aclocaldir.
+	(func_copy_some_files): New function factored out of...
+	(func_copy_all_files): ...here.  Adjust to use func_copy_some_files.
+	(re_pkgaux_files): Renamed to glob_pkgaux_files, since it is not
+	a regular expression.
+	(re_pkgmagro_files): Replaced with...
+	(pkgmacro_files): ...a colon delimited list of libtool installed
+	m4 files from aclocaldir.
+	(Main): Copy macro files from aclocaldir again.
+	* NEWS: Updated.
+
+2004-05-21  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* ltmain.sh (check_executable): The WIN32 API and MinGW do not support
+	S_IXOTH and S_IXGRP so use of these modes should be conditional.
+
+2004-05-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/tagtrace.test: Forgot to add this file to the repository
+	for Alexandre's 2004-05-16 patch below.
+
+2004-05-18  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Make this an m4_defun,
+	test the tags compiler to see if it is GCC, not the CC compiler.
+
+2004-05-16  Alexandre Duret-Lutz  <adl@gnu.org>
+
+	* doc/libtool.texi (Invoking libtool): Mention --tag=TAG.
+	(Tags, Trace interface): New nodes.
+	* m4/libtool.m4 (LT_SUPPORTED_TAG): New macro.
+	(_LT_LANG): Call it.
+	* tests/tagtrace.test: New file.
+	* tests/Makefile.am
+	(TESTS): Add tagtrace.test.
+	* tests/defs: Define AUTOCONF.
+
+2004-05-14  Mike Gorchak  <lestat@i.com.ua>
+
+	* ltmain.in: Add new qnx version type support.
+	* m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER): Use it.  Set
+	ldqnx.so linker type.
+	(AC_DEPLIBS_CHECK_METHOD): QNX6 uses GNU C++, with deplib
+	checking, so use pass_all.
+	(AC_LIBTOOL_PROG_COMPILER_PIC): Use -shared for QNX.
+	(_LT_LANG_CXX_CONFIG): QNX can make shared libraries.
+	* m4/ltdl.m4 (AC_LTDL_SYS_DLOPEN_DEPLIBS): QNX opens deplibs on
+	dlopen.
+	* NEWS: Updated.
+
+2004-05-05  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH): Insert space
+	around = for a test and a comma between runpath_var and $1. Bug
+	reported by Max Bowsher.
+
+2004-04-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/argz.h: Moved from here...
+	* libltdl/argz_.h: ...to here, so as not to shadow system
+	argz.h when we `#include <argz.h>' for example.
+	#include stdlib.h and sys/types.h to ensure we get a size_t
+	definition.
+	* libltdl/argz.c (HAVE_CONFIG_H): Set it up how ltdl likes it when
+	used by another client.
+	* m4/argz.m4: New file.
+	(gl_FUNC_ARGZ): Try to find an error_t definition, and a system
+	argz.h.
+	* m4/ltdl.m4: Use it.
+	(AC_LTDL_FUNC_ARGZ): Removed.
+	* libltdl/lt__glibc.h: #include <argz.h> to pick up either the
+	system argz.h or our libltdl/argz.h if necessary.
+	* libltdl/Makefile.am (libltdl_la_SOURCES): Move argz.h from
+	here...
+	(ltdldata_DATA): ...here. Along with argz.c.
+	(argz.h): Generate from argz_.h if the system file is missing.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+2004-04-22  Gary V. Vaughan  <gary@gnu.org>
+
+	According to Howard Chu <hyc@highlandsun.com>:
+	Applications should assume that the native dlopen is NOT
+	thread-safe, and take care of locking themselves. All application
+	calls into libltdl should thus be protected by the caller.
+
+	* libltdl/lt_mutex.c, libltdl/lt_mutex.h: Removed.
+	* libltdl/Makefile.am (pkginclude_HEADERS): Removed lt_mutex.h.
+	(libltdl_la_SOURCES): Removed lt_mutex.c and lt_mutex.h.
+	* libltdl/ltdl.h: Don't include lt_mutex.h.
+	* libltdl/lt__private.h (LT__MUTEX_GETERROR, LT__MUTEX_SETERROR)
+	(LT__MUTEX_SETERRORSTR): Renamed to...
+	(LT__GETERROR, LT__SETERROR, LT__SETERRORSTR): ...this.  Changed
+	all callers.
+	(LT__MUTEX_LOCK, LT__MUTEX_UNLOCK, lt_dlmutex_lock)
+	(lt_dlmutex_unlock, lt_dlmutex_seterror, lt_dlmutex_geterror):
+	Removed.  Changed all callers.
+	* doc/libtool.texi (Thread Saftey in libltdl):
+	* NEWS: Updated.
+
+2004-04-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_LANG_CXX_CONFIG): Detect Intel C++ compiler
+	version more idiomatically.
+
+2004-04-19  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* m4/libtool.m4: Use cc rather than ld to created
+	a shared library on HP-UX 11.x. On HP-UX 10.x, the
+	C compiler doesn't grok -b so we continue to use ld.
+
+	* m4/libtool.m4: Use cc rather than ld to create a
+	shared library on Solaris. When using the Sun
+	Workshop compiler 5.0 (and I presume any previous
+	version), revert to ld due to compiler errors.
+
+	* m4/libtool.m4: Use cc rather than ld to created
+	a shared library on Tru64 UNIX.
+
+	* m4/libtool.m4: Use cc rather than ld to created
+	a shared library on IRIX.
+
+	* libltdl/loader-shl_load.c: Fix typos during reorg.
+
+2004-04-19  Alexandre Duret-Lutz  <adl@gnu.org>
+
+	* doc/libtool.texi (LT_INIT): Properly display options in a table.
+
+2004-04-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_LANG_CXX_CONFIG): Intel C++ compiler 8.0 and
+	newer adds predep_objects and postdep_objects itself, so don't
+	duplicate them in $archive_cmds and $archive_expsym_cmds.
+	* NEWS: Updated.
+	Reported by Roberto Bagnara <bagnara@cs.unipr.it>
+
+2004-04-17  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/loader-dyld.c: Fix compilation issues. Set Original author
+	to me.
+
+2004-04-17  Todd Vierling  <tv@duh.org>,
+	Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (AC_LIBTOOL_SYS_MAX_CMD_LEN): Use sysctl to get the
+	max cmd length on BSD* and darwin. Make sure that there is a safety
+	factor too.
+
+2004-04-15  Scott James Remnant  <scott@netsplit.com>
+
+	* m4/libtool.m4 (_LT_LANG_DEFAULT_CONFIG): Remove code to handle 'none'
+	and 'all' options, this now always assumes automatic mode as that
+	works so well.
+	(_LT_LANG_DEFAULT): Remove definition
+	* m4/ltoptions.m4: Remove 'no-lang', 'auto-lang' and 'all-lang' options.
+	* configure.ac: Invoke LT_LANG for each desired supported language.
+	* doc/libtool.texi: Remove documentation for the LT_INIT options,
+	rewrite LT_LANG documentation.
+
+2004-04-14  Alexandre Duret-Lutz  <adl@gnu.org>
+
+	* bootstrap: Delete acinclude.m4.
+
+2004-04-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in (configure_ac): Don't complain about the lack of
+	aclocal.m4.
+	Reported by Alexandre Duret-Lutz <adl@src.lip6.fr>
+
+2004-04-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/ltdl.m4 (AC_LIB_LTDL): Remove AC_REPLACE_FUNCS for memmove
+	and strcpy.
+
+	* libltdl/lt__pre89.h, libltdl/memcpy.c, libltdl/memmove.c,
+	libltdl/strchr.c, libltdl/strcmp.c, libltdl/strrchr.c: Remove
+	half-assed pre-c89 support entirely.
+	* libltdl/lt__private.h: Don't refer to lt__pre89.h.
+	* libltdl/Makefile.am (ltdldata_DATA): Remove references to
+	deleted files.
+	* NEWS: Mention it.
+
+	* libltdl/lt__pre89.h, libltdl/ltdl.c, libltdl/ltdl.h, libltdl/argz.c,
+	libltdl/argz.h, libltdl/lt__glibc.h, libltdl/lt_dlloader.h,
+	libltdl/lt__dirent.c, libltdl/lt__dirent.h, libltdl/lt__private.h,
+	libltdl/lt__alloc.c, libltdl/lt__alloc.h, libltdl/lt_system.h,
+	libltdl/loader-dld_link.c, libltdl/loader-dlopen.c,
+	libltdl/loader-dyld.c,  libltdl/loader-loadlibrary.c,
+	libltdl/loader-shl_load.c, libltdl/lt_error.h, libltdl/lt_mutex.h:
+	Autoconf either defines to 1 or undefs the discovery macros it
+	puts in config.h, and many (non-GNU) compilers throw a spurious
+	warning when testing an #undef macro with #if.  For consistency,
+	while we are touching all these lines, use defined(MACRO) style
+	throughout.
+	Reported by Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+2004-04-13  Gary V. Vaughan  <gary@gnu.org>
+
+	Factor out the individual loaders, in preparation for preloading
+	them as libtool modules.  Currently loader-preopen.c is linked
+	unconditionally and other appropriate loaders discovered by
+	AC_LTDL_DLLIB are built and linked in:
+
+	* libltdl/Makefile.am (libltdl_la_SOURCES): Add loader-preopen
+	module.
+	* m4/ltdl.m4 (AC_LTDL_DLLIB): Use AC_LIBOBJ to add appropriate
+	loaders to libltdl.
+	* libltdl/lt_system.h (LT_SCOPE): Moved to here.
+	* libltdl/ltdl.h (lt_dlloader, lt_user_data, lt_module)
+	(lt_module_open, lt_module_close, lt_find_sym, lt_dlloader_exit)
+	(struct lt_user_dlloader, lt_dlloader_next, lt_dlloader_find)
+	(lt_dlloader_name, lt_dlloader_data, lt_dlloader_add)
+	(lt_dlloader_remove): Moved declarations...
+	* libltdl/lt_loader.h: ...to here.
+	* libltdl/ltdl.c: Include lt_loader.h.  Move loader implementation
+	code from here...
+	* libltdl/loader-dld_link.c, libltdl/loader-dlopen.c,
+	libltdl/loader-dyld.c, libltdl/loader-load_add_on.c,
+	libltdl/loader-loadlibrary.c, libltdl/loader-preopen.c,
+	libltdl/loader-shl_load.c: ...to here.
+	* tests/cdemo/Makefile.am, tests/demo/Makefile.am,
+	tests/depdemo/Makefile.am, tests/f77demo/Makefile.am,
+	tests/mdemo/Makefile.am, tests/mdemo2/Makefile.am,
+	tests/pdemo/Makefile.am, tests/tagdemo/Makefile.am (AM_CPPFLAGS):
+	Add -I$(top_srcdir)/../.. so that libltdl include files can be
+	written as #include <libltdl/lt_dlloader.h> and found correctly.
+
+2004-04-13  Gary V. Vaughan  <gary@gnu.org>
+
+	Factor out the mutex handling and error handling into their own
+	modules.  Mutex handling is not currently useful in combination
+	with posix threads, and should be easier to replace if it is in a
+	separate module.  Additionally, we can factor out the loaders in
+	such a way as to depend on only the portability layer and these
+	new mutex and error modules now:
+
+	* libltdl/Makefile.am (pkginclude_HEADERS): Install lt_error.h and
+	lt_mutex.h to $includedir/libltdl.
+	(libltdl_la_SOURCES): Build lt_error and lt_mutex objects.
+	* libltdl/ltdl.h (LT_SCOPE): Moved from here...
+	* libltdl/lt_system.h (LT_SCOPE): ...to here.
+	* libltdl/ltdl.c (lt_dlerror_strings, LT_DLSTRERROR): Moved from
+	here...
+	* libltdl/lt__private.h (lt__error_strings, LT__STRERROR): ...to
+	here as additional internal interfaces to lt_error.  Changed all
+	callers.
+	* libltdl/ltdl.c (LT_DLMUTEX_LOCK, LT_DLMUTEX_UNLOCK)
+	(LT_DLMUTEX_SETERROR, LT_DLMUTEX_GETERROR, lt_dlmutex_lock_func)
+	(lt_dlmutex_unlock_func, lt_dlmutex_geterror_func)
+	(lt_dllast_error): Moved from here...
+	(LT__MUTEX_LOCK, LT__MUTEX_UNLOCK, LT__MUTEX_SETERRORSTR)
+	(LT__MUTEX_GETERROR, lt__mutex_lock_func, lt__mutex_unlock_func)
+	(lt__mutex_geterror_func, lt__last_error): ...to here as
+	additional internal interfaces to lt_mutex.  Changed all callers.
+	(LT_MUTEX_SETERROR): Take an errorcode rather than a string.
+	Changed all callers.
+	* libltdl/ltdl.c, libltdl/ltdl.h (lt_dlmutex_register): Moved from
+	here...
+	* libltdl/lt_mutex.c, libltdl/lt_mutex.h (lt_dlmutex_register):
+	...to here. New files.
+	* libltdl/ltdl.c, libltdl/ltdl.h (lt_dladderror, lt_dlseterror)
+	(lt_dlerror_table):
+	Moved from here...
+	* libltdl/lt_error.c, libltdl/lt_error.h (lt_dladderror)
+	(lt_dlseterror, lt_dlerror_table): ...to here. New files.
+
+2004-04-13  Scott James Remnant  <scott@netsplit.com>
+
+	* Makefile.am (XDELTA_OPTIONS): Remove --pristine as that
+	generates huge xdeltas.
+
+2004-04-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.c (argz_append, argz_create_sep, argz_insert)
+	(argz_next, argz_stringify): Move from here...
+	* libltdl/argz.c: New file. ...to here.
+	* libltdl/lt__glibc.h: New file. Rename global symbols into the
+	lt__ namespace.
+	* libltdl/lt__private.h: Include lt__glibc.h.
+	* libltdl/Makefile.am (libltdl_la_SOURCES): Add new files.
+	(AM_CPPFLAGS): Add -DLTDL.
+	* libltdl/argz.h (argz_append, argz_create_sep, argz_insert)
+	(argz_next, argz_stringify): New file. Declare argz functions
+	here, including lt__glibc.h when LTDL is defined to rename global
+	symbols for libltdl.
+	* m4/ltdl.m4 (AC_LTDL_FUNC_ARGZ): Add argz to AC_LIBOBJ if any of
+	our argz_* functions are missing from the system libraries.
+
+	* libltdl/ltdl.c: Move standard headers and preprocessor guards
+	from here...
+	* libltdl/lt__private.h: ...to here.  New file to declare ltdl's
+	internal interfaces.
+	* libltdl/ltdl.c: Include lt__private.h.
+	* m4/ltdl.m4 (AC_LIB_LTDL): Add lt_dirent to AC_LIBOBJ if all of
+	opendir, readdir and closedir are missing.
+	(AC_CHECK_HEADERS): Remove assert.h, ctype.h, errno.h, malloc.h,
+	stdio.h and stdlib.h; these headers are all available in standard
+	c89 environments and newer.
+	* libltdl/lt__private.h: Include them here unconditionally.
+	* libltdl/lt__dirent.c (opendir, readdir, closedir): New file.
+	Windows dirent emulation functions moved to here...
+	* libltdl/ltdl.c (opendir, readdir, closedir): ...from here.
+	* libltdl/lt__dirent.h: New file.  Rename the global symbols from
+	lt__dirent.c into the lt__ namespace so they don't clash with
+	other libraries.
+
+2004-04-08  Gary V. Vaughan  <gary@gnu.org>
+
+	Factor out the bottom portability layer from ltdl.  Code in this
+	layer has global symbols renamed by lt__pre89.h, and may not
+	refer to any symbols except those provided by the system libraries
+	or other code in the portability layer:
+
+	* libltdl/lt__pre89.h: New file.  Rename all the symbols from
+	LTLIBOBJS into the lt__ namespace so that they don't clash with
+	other libraries.
+	* libltdl/ltdl.c (rpl_memcpy, rpl_memmove, rpl_strchr, rpl_strcmp)
+	(rpl_strrchr): Moved from here...
+	* libltdl/memcpy.c (memcpy): ...to here, and fixed void *
+	dereference bug...
+	* libltdl/memmove.c (memmove): ...to here, and fixed void *
+	dereference bug...
+	* libltdl/strchr.c (strchr): ...to here...
+	* libltdl/strcmp.c (strcmp): ...here...
+	* libltdl/strrchr.c (strrchr): ...and here.
+	* libltdl/Makefile.am (libltdl_la_SOURCES): Add lt__pre89.h.
+	(libltdl_la_LIBADD, libltdlc_la_LIBADD): Add $(LTLIBOBJS).
+	(ltdldata_DATA): Add replacement sources files.
+	* m4/ltdl.m4 (AC_LIB_LTDL): Do careful config.h and LTLIBOBJ
+	setting for missing pre89 functions.
+
+2004-04-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/ltdl.h (LT_PARAMS): Removed.  Changed all users to
+	ANSI prototypes.
+	(lt_ptr): Keep backwards compatibility stub.
+	* libltdl/ltdl.c, libltdl/ltdl.h: Use ANSI function declarations
+	throughout.  s/lt_ptr/void */g.
+
+2004-04-08  Fredrik Estreen  <estreen@algonet.se>
+
+	* m4/ltdl.m4: Rename shrext to shrext_cmds here too.
+
+2004-04-06  Gary V. Vaughan  <gary@gnu.org>
+
+	There was no clean separation of abstraction layers in libltdl.
+	The first step in fixing this is to factor out the memory
+	management abstraction, making a start on removing promiscuity
+	from the underlying portability layer:
+
+	* doc/libtool.texi (Libltdl interface): Remove lt_dlmalloc,
+	lt_dlrealloc and lt_dlfree references.  The memory management
+	layer used by libltdl is now private.
+	* libltdl/lt_system.h: New installed header for system portability
+	abstraction.
+	* libltdl/ltdl.h: Use it.
+	* libltdl/lt__alloc.c, libltdl/lt__alloc.h: New module above
+	system portability layer to abstract ltdl's memory management.
+	* libltdl/ltdl.c: Use lt__alloc.h.
+	(closedir): Use free.
+	(opendir): Use malloc/free.
+	(lt__xalloc_die_callback): Report memory failures through
+	lt_dlerror.
+	(lt_dlinit): Use it to initialise memory management.
+	(LT_DLMALLOC, LT_DLREALLOC, LT_DLFREE, LT_EMALLOC, LT_EREALLOC)
+	(rpl_strdup, rpl_realloc, lt_estrdup, lt_emalloc, lt_erealloc):
+	Removed in favour of...
+	(lt__strdup, lt__memdup, MALLOC, REALLOC, FREE): ...these calls
+	from libltdl/lt__alloc.h.  Changed all callers.
+	(rpl_argz_append, rpl_argz_create_sep, rpl_argz_insert): As part
+	of the portability layer, these functions no longer use libltdl
+	memory management API.
+	(free_vars): Factored out.
+	(LT_DLMEM_REASSIGN): While redoing memory handling, renamed...
+	* libltdl/lt__alloc.h (MEMREASSIGN): ...to this.
+	* libltdl/Makefile.am (AUTOMAKE_OPTIONS): Let automake track
+	dependencies automatically.
+	(pkgincludedir): Override from parent package's setting.
+	(pkginclude_HEADERS): Install lt_system.h.
+	(libltdl_la_SOURCES): Add new files.
+	* NEWS: Updated.
+	Reported by Dalibor Topic <robilad@kaffe.org>
+
+2004-04-01  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in: Remove an extra eval concat_cmds that some idiot added.
+	Fixes double eval on AIX, reported by Albert Chin and Uwe Moeller.
+
+	* NEWS: Add a news item about xlc support that I forgot yesterday.
+
+2004-03-31  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4, ltmain.in (darwin): Support IBM's xlc and xlc++.
+
+2004-03-31  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_LANG_C_CONFIG): If $compiler is not set, then
+	don't call the macros that test it.
+	(_LT_LANG_CXX_CONFIG): Ditto.
+	(_LT_LANG_F77_CONFIG): Ditto.
+	(_LT_LANG_GCJ_CONFIG): Ditto.
+	(_LT_LANG_RC_CONFIG): Ditto.
+
+2004-03-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in (func_scan_files): sed BRE have no alternation, so
+	break LT_INIT matcher out.
+	(func_serial): Don't escape literal parens for grep BRE.
+
+	* m4/libtool.m4 (LT_INIT): aclocal can't see AC_DEFUN_ONCE, so use
+	AC_DEFUN and m4_define.
+	* libtoolize.in (func_serial): No longer accept AC_DEFUN_ONCE...
+	(func_grep): ...so mere grep is sufficient again...
+	(EGREP): ...and this is no longer required.
+
+2004-03-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4: Use LT_INIT as #serial tag.
+	* libtoolize.in: Grok LT_INIT!  Pass A[CM]_PROG_LIBTOOL to...
+	(func_serial_update): ...here, we now take an additional parameter
+	containing another regex to match ancient serialed files.
+	(func_serial): Accept AC_DEFUN_ONCE of the #serial tag...
+	(func_grep): ...which requires egrep...
+	(EGREP): ...substituted by config.status.
+	(func_scan_files): Set seen_libtool if LT_INIT goes by.
+
+	* Makefile.am (pkgmacro_DATA): Install ltoptions.m4.
+
+	* libltdl/Makefile.am (AM_CPPFLAGS): Also check $top_builddir for
+	config.h.
+	(ltdl.o): config.h is in $top_builddir.
+
+2004-03-24  Scott James Remnant  <scott@netsplit.com>
+
+	* NEWS: Explain more fully why we no longer load libraries
+	with global symbol resolution.
+	* doc/libtool.texi (libtool script contents): Add missing
+	documentation for 'inherit_rpath' variable.
+
+	* configure.ac: Catch errors during calls to AC_PROG_CXX,
+	AC_PROG_CXXCPP and AC_PROG_F77 before LT_INIT.  Only set the
+	HAVE_CXX and HAVE_F77 conditions to true if an error didn't
+	occur (AC_PROG_CXX leaves CXX="g++" even if it didn't find one).
+	Set HAVE_GCJ and HAVE_RC to true correctly as well.
+	* m4/libtool.m4 (LT_PROG_GCJ): If AC_PROG_GCJ or AM_PROG_GCJ are
+	defined, expand to the definition of those instead of our own.
+	Define GCJ to '' instead of 'no' if not found.
+	(LT_PROG_RC) Define RC to '' instead of 'no' if not found.
+	(_LT_LANG_GCJ_CONFIG): Require LT_PROG_GCJ to be expanded first.
+	(_LT_LANG_RC_CONFIG): Require LT_PROG_RC to be expanded first.
+
+	* libltdl/ltdl.c (sys_dl_open): Don't load libraries with global
+	symbol resolution.
+	* NEWS: Updated.
+
+2004-03-24  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* m4/libtool.m4: Add new variable, inherit_rpath, if the
+	RPATHs of the libraries being linked are inherited in
+	the output file. For systems with a linker exhibiting
+	this feature, programs/libraries must be relinked at
+	installation time.
+
+	* m4/libtool.m4: When linking convenience libraries on Solaris
+	with the Sun C++ compiler, pass convenience libraries through
+	to the linker with -Qoption between allextract/defaultextract.
+	The Sun C++ compiler bundles -Qoption arguments so
+	convenience libraries are linked with defaultextract
+	otherwise.
+	* tagdemo/Makefile.am, tagdemo/main.cpp, tagdemo/conv.h,
+	tagdemo/conv.cpp: Augment tagdemo test to link a convenience
+	library with a libtool library.
+
+	* ltmain.in: Piecewise linking doesn't work when the output
+	file is an absolute path, use the basename only instead.
+
+	* ltmain.in: When a library is installed, dependent on a
+	convenience library, and it involves relinking, the object
+	files extracted from the convenience library are not removed
+	after the relink. This is a problem if you build as non-root,
+	install as root, then try to remove the build directory as
+	non-root; Clean up properly if relink fails; Change
+	"$realname"U to ${realname}T to be consistent.
+
+2004-03-24  Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.in <prog linkmode>: Always add -L options to
+	$newlib_search_path instead of just in scan mode to ensure that
+	non-libtool libraries in user-specified directories can be found.
+
+2004-03-22  Scott James Remnant  <scott@netsplit.com>
+
+	* m4/libtool.m4 (_LT_CONFIG): Remove unneeded else condition
+	code, now the support determination is done in m4.
+	(_LT_LANG): Correct comment, unexpected leak from keybuk-lt-tag.patch.
+
+2004-03-21  Scott James Remnant  <scott@netsplit.com>
+
+	* libltdl/Makefile.am (libltdl_la_LDFLAGS): Increment CURRENT
+	and AGE of libltdl, warranted by the addition of lt_dlhandle_find()
+	since 1.5.2.
+
+2004-03-21  Scott James Remnant  <scott@netsplit.com>
+
+	Further sweeping changes to the user interface to libtool from
+	`configure.ac' to allow users to better control the list of
+	supported languages.  Three LT_INIT options 'no-lang', 'all-lang'
+	and 'auto-lang' (the default) control the initial list and others
+	may be added with LT_LANG.
+
+	* m4/libtool.m4 (_LT_CONFIG): Renamed AC_LIBTOOL_CONFIG to _LT_CONFIG
+	which is more consistent with our own namespace and gets us further out
+	of Autoconf's.
+	(_LT_LIBTOOL_TAGS): Output available_tags variable based entirely
+	on the value of _LT_TAGS.
+	(_LT_COPYING): Call _LT_LIBTOOL_TAGS to output available tags,
+	always append tag configuration if the tag is available.
+	(LT_LANG): New macro to enable support for a language that accepts
+	tag names (eg. "CXX") or human language names (eg. "C++").
+	(_LT_LANG): Internal support macro for above that appends the
+	tag to _LT_TAGS and calls the appropriate config macro.
+	(LT_INIT): Ensure that LT_LANG is not called before LT_INIT.
+	(AC_LIBTOOL_TAGS): Removed, call LT_LANG for each language now.
+	(_LT_AC_TAG_CHECK): Removed, _LT_LANG handles duplicate calls.
+	(_LT_LANG_DEFAULT_CONFIG): Macro to set initial language support
+	based on options passed to LT_INIT.
+	(_LT_SETUP): Call _LT_LANG_DEFAULT_CONFIG.
+	(_LT_AC_TAG_CONFIG): Removed, handled by _LT_LANG_DEFAULT_CONFIG.
+	(_LT_AC_LANG_CXX, _LT_AC_LANG_F77, _LT_AC_LANG_GCJ): Removed,
+	automatic language support inclusion now handled by
+	_LT_LANG_DEFAULT_CONFIG.
+	(AC_LIBTOOL_CXX): Obsolete macro, update to LT_LANG(C++).
+	(AC_LIBTOOL_F77): Obsolete macro, update to LT_LANG(Fortran 77).
+	(AC_LIBTOOL_GCJ): Obsolete macro, update to LT_LANG(Java).
+	(AC_LIBTOOL_LANG_C_CONFIG_: Removed.
+	(_LT_AC_LANG_C_CONFIG): Renamed to _LT_LANG_C_CONFIG, call
+	_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
+	(_LT_SETUP): Replace call to AC_LIBTOOL_LANG_C_CONFIG with call to
+	new _LT_LANG_C_CONFIG macro.
+	(AC_LIBTOOL_LANG_CXX_CONFIG): Removed.
+	(_LT_AC_LANG_CXX_CONFIG): Renamed to _LT_LANG_CXX_CONFIG, call
+	_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
+	(AC_LIBTOOL_LANG_F77_CONFIG): Removed.
+	(_LT_AC_LANG_F77_CONFIG): Renamed to _LT_LANG_F77_CONFIG, call
+	_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
+	(AC_LIBTOOL_LANG_GCJ_CONFIG): Removed.
+	(_LT_AC_LANG_GCJ_CONFIG): Renamed to _LT_LANG_GCJ_CONFIG, call
+	_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
+	(AC_LIBTOOL_LANG_RC_CONFIG): Removed.
+	(_LT_AC_LANG_RC_CONFIG): Renamed to _LT_LANG_RC_CONFIG, call
+	_LT_CONFIG instead of AC_LIBTOOL_CONFIG.
+	(LT_AC_PROG_GCJ): Renamed to LT_PROG_GCJ.
+	(LT_AC_PROG_RC): Renamed to LT_PROG_RC.
+	* m4/ltoptions.m4: Define new 'no-lang', 'auto-lang' and 'all-lang'
+	options which set the default for _LT_LANG_DEFAULT_CONFIG.
+	* m4/lt~obsolete.m4: Removed AC_LIBTOOL_CONFIG, _LT_AC_LANG_C_CONFIG,
+	_LT_AC_LANG_GCJ_CONFIG, _LT_AC_LANG_RC_CONFIG; all of which are no
+	long referenced in any way.
+	* configure.ac: Enable all languages.
+	* tests/cdemo/configure.ac, tests/demo/configure,ac,
+	tests/depdemo/configure.ac, tests/f77demo/configure.ac,
+	tests/mdemo/configure.ac, tests/pdemo/configure,ac,
+	tests/tagdemo/configure.ac: Remove calls to AC_LIBTOOL_TAGS,
+	the default 'auto-lang' mode now does the right thing.
+	* doc/libtool.texi (The LT_INIT macro): Add documentation for
+	new LT_INIT options and the LT_LANG macro, replacing the old
+	documentation of AC_LIBTOOL_TAGS which is no more.
+	* NEWS: Updated.
+
+2004-03-17  Scott James Remnant  <scott@netsplit.com>
+
+	* m4/libtool.m4: Removed AC_BEFORE references to AC_LIBTOOL_SETUP
+	which is no more.
+	* m4/lt~obsolete.m4: As AC_LIBTOOL_SETUP is no longer referenced,
+	it can be removed from this file.  Remove _AC_PROG_LIBTOOL also.
+
+2004-03-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4: Remove newlines from lt_ld_extra, so
+	variable can safely be stored in config.cache.
+
+2004-03-14  Michael Pruett  <michael@68k.org>
+
+	* m4/libtool.m4 (AC_LIBTOOL_PROG_LD_SHLIBS0 [irix]: Define
+	archive_expsym_cmds so that --export-symbols will work.
+
+2004-03-11  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in (link_all_deplibs,darwin): Link libraries in the
+	correct order. Bug from Zachary Pincus <zpincus@stanford.edu>.
+
+2004-03-14  Scott James Remnant  <scott@netsplit.com>
+
+	* m4/ltmain.in: Only check precious_files_regex if it is not empty.
+
+2004-03-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (Autoconf and LTLIBOBJS): The correct version
+	of Autoconf is 2.54.
+	From Alexandre Duret-Lutz  <adl@src.lip6.fr>
+
+2004-03-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (Using Automake): Cite correct Automake version
+	for -dlopen quoting.
+	(Autoconf and LTLIBOBJS): Cite correct Autoconf	versions
+	throughout.
+	(Distributing libltdl): Use AM_CPPFLAGS; INCLUDES is deprecated.
+	From Alexandre Duret-Lutz  <adl@src.lip6.fr>
+
+2004-03-05  David Edelsohn  <edelsohn@gnu.org>
+
+	* m4/libtool.m4: Disable building static libraries if building
+	shared libraries on AIX 5L.
+
+2004-03-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in: Remove --ltdl-tar.  It doesn't work with the
+	current implementation, and seems more or less pointless.
+	* doc/libtool.texi (Invoking libtoolize): Updated.
+	* NEWS: Updated.
+
+	* doc/libtool.texi: This manual has not been maintained properly
+	for a number of years.  Much of what it said was outdated, or
+	plain wrong with reference to modern autotools.  This change
+	represents a first pass edit to clean up the obviously wrong.
+
+2004-03-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Prune out my arch mirror dir before running
+	amok through the tree with 'rm -rf'!
+
+2004-03-02  Patrick Welche  <prlw1@newn.cam.ac.uk>
+
+	* doc/libtool.texi (LT_INIT): Dumb typos fixed.
+
+2004-02-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in <install mode>: Add missing --help doc for
+	-inst-prefix option.
+
+	* ltmain.in <link mode>: Add missing --help doc for -shrext
+	option.
+
+	* ltmain.in (IFS): Move '\n' to beginning of IFS so that emacs
+	doesn't offer to strip trailing ' \t' on every save.
+
+	* ltmain.in: Add missing --help doc for --preserve-dup-deps.
+
+2004-02-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.maint (web-manual): Generate the web manual carefully
+	so that links will still work when it is uploaded to gnu.org.
+	* README-alpha: Note that this rule should be used at release
+	time.
+
+2004-02-20  Gary V. Vaughan  <gary@gnu.org>
+
+	Sweeping changes to the user interface to libtool from
+	`configure.ac' to be more like AC_INIT and accept a space
+	delimited list of options.  Instead of calling `AC_LIBTOOL_DLOPEN;
+	AC_PROG_LIBTOOL', we now recommend `LT_INIT([dlopen])':
+
+	* m4/libtool.m4	(AC_PROG_LIBTOOL, _AC_PROG_LIBTOOL)
+	(AC_LIBTOOL_SETUP): Removed.  Added AU_DEFUNs.
+	(LT_INIT): Replace with an Autoconf like interface which accepts a
+	version number as a minimum required libtool release at configure
+	time.
+	* m4/ltoptions.m4: New file inspired by automake/m4/amoptions.m4,
+	which additionally flags an error if the configuring libtool
+	macros are not new enough according to LT_INIT.
+	(LT_OPTION_DEFINE): New macro to declare option handlers.
+	(dlopen, win32-dll, shared, disable-shared, static)
+	(disable-static, fast-install, disable-fast-install, pic-only)
+	(no-pic): Newly LT_OPTION_DEFINEd option handlers that use...
+	(_LT_ENABLE_SHARED, _LT_ENABLE_STATIC, _LT_ENABLE_FAST_INSTALL)
+	(_LT_WITH_PIC, _LT_WIN32_DLL): New macros to handle
+	LT_LIBTOOL_INIT options...
+	* m4/libtool.m4 (AC_ENABLE_SHARED, AC_ENABLE_STATIC)
+	(AC_ENABLE_FAST_INSTALL, AC_LIBTOOL_DLOPEN, AC_LIBTOOL_WIN32_DLL):
+	...to replace these user interface macros, now defined as
+	AU_DEFUNs.
+	(AC_DISABLE_SHARED, AC_DISABLE_STATIC, AC_DISABLE_FAST_INSTALL):
+	Removed.  No longer required with LT_INIT_LIBTOOL interface.
+	Added AU_DEFUNs.
+	(AM_ENABLE_SHARED, AM_DISABLE_SHARED, AM_ENABLE_STATIC)
+	(AM_DISABLE_STATIC): Changed AU_DEFUNs to match new interface.
+	(_LT_SETUP): Internal to LT_INIT, replaces AC_LIBTOOL_SETUP.
+	* m4/lt~obsolete.m4 (AC_LIBTOOL_SETUP, _AC_PROG_LIBTOOL)
+	(_LT_PROG_LTMAIN):  More AC_DEFUNs that have been retracted.
+	* configure.ac: Use new interface.
+	* doc/libtool.texi: Document new interface.
+	* NEWS: Updated.
+
+2004-02-18  Gary V. Vaughan  <gary@gnu.org>
+
+	* commit (SHELL): Set it explicitly, incase some madman is using
+	tcsh as their login shell :-b
+
+2004-02-15  Scott James Remnant  <scott@netsplit.com>
+
+	* Makefile.am (m4/ltversion.m4): Generate serial number by
+	removing initial '1.' from the revision, replace @MACRO_SERIAL@
+	with this new variable.
+	* m4/ltversion.in: Use @MACRO_SERIAL@ for the serial number
+	as some shells don't like a '.' when using test.
+
+	* m4/ltversion.in: Add a serial number to this file otherwise
+	libtoolize will refuse to copy it into $pkgdatadir, where it
+	is needed by m4/libtool.m4.
+
+2004-02-15  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4, ltmain.in: Rename shrext to shrext_cmds.
+
+2004-02-13  Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.in, libtoolize.in, commit, config/mailnotify: Correctly
+	quote usage of $basename and $dirname to avoid (unlikely) path
+	expansion.
+
+	* tests/sh.test: Test the config/ltmain.sh and libtoolize in the
+	build directory not the source directory, where they won't exist
+	during 'make distcheck'.
+	* ltmain.in: Revert one line of previous intendation clean-up
+	to enable one of the sh.test checks to pass.
+
+	* tests/cdemo/configure.ac: Drop AC_PREREQ back to 2.54, this
+	was debris from Gary's cvsapply going mad and wasn't backed
+	out.
+
+	* Makefile.am (pkgmacro_DATA): We have to distribute
+	m4/ltversion.m4 because it can be needed before the Makefile
+	that generates it exists.
+
+2004-02-13  Gary V. Vaughan  <gary@gnu.org>
+
+	* commit (MKSTAMP): Look for mkstamp in the right place.
+
+2004-02-12  Scott James Remnant  <scott@netsplit.com>
+
+	* Makefile.maint, Makefile: Move rules intended for Libtool
+	maintainers only out of the Makefile we distribute and into one
+	that we only need keep in CVS.
+	* README-alpha: Add -fMakefile.maint to the instructions where
+	needed.
+
+2004-02-12  Albert Chin-A-Young  <china@thewrittenword.com>
+	Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.in: Fix typo: duplcations -> duplications,
+	Fix indentation of a handful of badly indented blocks,
+	Fix last remaining use of 'grep' to $GREP,
+	Remove unnecessary trailing slash where we break a line on a
+	command separator.
+	* m4/libtool.m4: Also remove unnecessary trailing slash where
+	we break a line on a command separator.
+
+2004-02-12  Scott James Remnant  <scott@netsplit.com>
+
+	* m4/ltoptions.m4: This got committed by an over-keen Gary,
+	but the support for this isn't ready yet and if aclocal decides
+	to m4_include this (which it will) you'll get a non-functioning
+	libtool.  Removed.
+
+	* ltmain.in: Remove duplicated version checking block.
+
+	* bootstrap, m4/libtool.m4: Argh, Gary went crazy after cvsapply
+	went crazy and backed out more than he should've.  This patch puts
+	some of it back again.
+
+	* ltmain.in, libtoolize.in, commit, config/mailnotify: Remove
+	$SED from definitions of $dirname and $basename and prefix each
+	use with it instead.  Some shells (zsh) treat the expansion as
+	a single command instead of a command with arguments.
+
+	* config/mailnotify (func_sendmail): Look for sendmail in a
+	couple of common non-PATH locations as well.
+
+	* ltmain.in: Fix typo: macro's -> macros.
+
+	* ltmain.in: Correct definition of basename sed expression to
+	not include single quotes.
+
+2004-02-12  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in: Use $progpath as for ltmain.in to work around the
+	IRIX bug described below.
+	* commit, config/mailnotify: Ditto. Resynch with cvs-utils HEAD.
+
+2004-02-12  Albert Chin-A-Young  <china@thewrittenword.com>,
+	    Gary V. Vaughan  <gary@gnu.org>
+
+	* ltmain.in (progpath): Work around backward compatibility issue
+	on IRIX 6.5. On IRIX 6.4+, sh is ksh but when the shell is invoked
+	as "sh" and the current value of the _XPG environment variable is
+	not equal to 1 (one), the special positional parameter $0, within
+	a function call, is the name of the function. So, rather than
+	using "$0" in functions, we set $progpath in the body and use that
+	everywhere instead (incase of code refactoring later).
+	(EXIT_SUCCESS, EXIT_FAILURE, EXIT_MISMATCH): For clarity.
+
+2004-02-12  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (EXTRA_DIST): Remove config/mailnotify after all; it
+	is of no use in a distribution tarball.
+
+2004-02-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* commit: Fix cut-n-paste error.
+
+	* commit: Completely change CVS/Root->name sed script to actually
+	work when :ext: is not shown.
+
+	* commit: Improve CVS/Root->name sed script to work when :ext: is
+	not shown.
+
+2004-02-11  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* m4/libtool.m4: Fix typo: testring -> teststring.
+
+2004-02-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* commit: Mail a nicer commit notification.
+
+2004-02-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* NEWS, bootstrap, configure.ac, ltmain.in, m4/libtool.m4:
+	* m4/lt~obsolete.m4, tests/cdemo/configure.ac: Arghh.  cvsapply just
+	went crazy and committed a bunch of stuff that shouldn't have been
+	in the last changeset.  The patch backs it all out.
+
+	* config/mailnotify: New file for mailing commit notifications,
+	imported from cvs-utils.
+	* commit: Updated from cvs-utils and tweaked for libtool.
+	* Makefile.am (EXTRA_DIST): Add config/mailnotify.
+
+2004-02-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Remove vcl.tmp, otherwise it can interfere with make.
+	* Makefile.am (vcl.tmp): Move comment out of multi-line command,
+	as this rule is called from bootstrap as if it were a Makefile.
+
+	* m4/ltversion.in: New file to capture what version number macros
+	are being used.
+	* Makefile.am (m4/ltversion.m4): New rule to create it from
+	m4/ltversion.in.
+	(nodist_pkgmacro_DATA): Add m4/ltversion.m4.
+	(EXTRA_DIST): Add m4/ltversion.in.
+	* m4/libtool.m4 (AC_LIBTOOL_SETUP): AC_REQUIRE LTVERSION_VERSION
+	from ltversion.m4.
+	* bootstrap: Call the Makefile.am to create an initial
+	m4/ltversion.m4.
+	* ltmain.in: Diagnose version mismatches of various flavours.
+	* TODO: Remove mismatch item.
+	* NEWS: Updated.
+
+	* Makefile.am ($(top_builddir)/config.status): Removed.
+	* configure.ac (CONFIG_STATUS_DEPENDENCIES): This substitution is
+	how automake-1.8 now informs all Makefiles when config.status
+	needs to be rebuilt.
+	Reported by Alexandre Duret-Lutz <adl@src.lip6.fr>
+
+	* configure.ac (AC_CONFIG_FILES): Generate libtoolize from here.
+	* Makefile.am (libtool, libtoolize): These rules are redundant.
+	Automake generates better rules for remaking these files.
+
+	* m4/libtool.m4 (AC_LIBTOOL_SETUP): Catch unexpanded macros with
+	beginning with LT_ and _LT_.
+	* configure.ac (LT_MAJOR, LT_MINOR, LT_MICRO, LT_ALPHA): Renamed
+	to lt_major, lt_minor, lt_micro, lt_alpha to save triggering the
+	unexpanded macros error.
+
+	* m4/libtool.m4 (AC_PROVIDE_IFELSE): Removed.  We now require
+	Autoconf 2.58, which ships this macro anyway.
+
+	* Makefile.am: Comment typo.
+
+	* m4/libtool.m4 (LT_PREREQ): Declare the minimum release number
+	that is required for the calling code.
+	* doc/libtool.texi (AC_PROG_LIBTOOL): Document it.
+	* NEWS: Updated.
+
+2004-02-05  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in (infer_tag, win32_libid): Style changes. Rename
+	infer_tag to func_infer_tag and win32_libid to func_win32_libid.
+	* m4/libtool.m4 (cygwin): rename win32_libid to func_win32_libid.
+
+2004-02-04  Peter O'Gorman  <peter@pogma.com>
+
+	* ltmain.in (infer_tag): Move tag inferrence to a shell function.
+	Also test $base_compile against $CC with escaped arguments. Bug
+	reported by Geoff Keating <geoffk@apple.com>.
+
+2004-02-03  Scott James Remnant  <scott@netsplit.com>
+
+	* Makefile.am (install-data-hook): Manually make config.guess
+	and config.sub executable after they are installed as _DATA.
+	We can't use _SCRIPTS because the various program name
+	transforms may be applied to them.
+	(dist_pkgdata_DATA): List config.guess and config.sub here
+	(pkgdata_SCRIPTS): instead of here.
+
+2003-02-03  Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.in: Create temporary directory under a strict umask
+	rather than running chmod afterwards, preventing a race
+	condition where the directory could be replaced with a symbolic
+	link in the time between the two commands.
+
+2004-01-31  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (_LT_CONFIG_STATUS_DECLARE): Change `echo to
+	`$echo, causes problems when builtin echo is broken. Reported
+	by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>.
+
+2004-01-27  Scott James Remnant  <scott@netsplit.com>
+
+	This fixes release procedure problems discovered whilst making
+	the 1.5.2 release.
+
+	* Makefile.am (cvs-dist): Because we check whether ChangeLog
+	has been committed, this rule can't be run with uncommitted
+	source so we can't run 'commit' and don't need to run
+	'make dist' a second time.  Fix CVS tag as it should be
+	"release-X" not "Release-X".
+	(cvs_commit): New rule for the cvs-release chain that runs
+	'commit'
+	(cvs-release): Depend on cvs-commit, depend on deltas instead of
+	cvs-diff and xdelta.
+	(cvs-diff): Removed, replaced with delta-diff.
+	(delta-diff): Unpack and diff the old and new tarballs rather
+	than using CVS, so we get a genuinely complete diff.
+	(xdelta): Removed, replaced with delta-xdelta.
+	(got-xdelta): New rule for improved reading.
+	(delta-xdiff): Copied and cleaned up version of old xdelta rule.
+	(deltas): Depends on delta-diff and delta-xdelta (make deltas).
+	(cvs-news): Don't depend on timestamps, cvs-dist itself does now.
+	(prev-tarball): This is the only place we need a LASTRELEASE check
+	so copy the code here and remove the CHECK_RELEASE variable.
+	(new-tarball): Check there's a new tarball (did cvs-dist work?)
+	(FETCHFILES): Remove obsolete libltdl mentions.
+	* README-alpha: Update CVS instructions as everything's changed
+	on Savannah.
+	(Release procedure): Update NEWS and ChangeLog after changing
+	the version number (both times); Run 'make fetch' after running
+	'configure' (difficult to do it beforehand); Require 'commit'
+	before 'make cvs-dist' as that checks ChangeLog is committed;
+	'make deltas' instead of 'cvs-diff' and 'xdelta', pass LASTRELEASE
+	to make instead of OLDVERSION (and it's mandatory); Clean up
+	uploading paragraph; Clearer announcement sending instruction;
+	Removed ftp-upload@gnu.org mail as that's not necessary now;
+	Make web page updating instructions a bit clearer; Add an instruction
+	to update the manual for non-alphas.
+	(Alpha release note template): Add a Subject; update CVS instructions.
+	(Full release note template): Add a Subject; update CVS instructions.
+	* configure.ac: Add dist-bzip2 to AM_INIT_AUTOMAKE as we talk
+	about bz2 files in our release announcements; remove old reference
+	to OLDVERSION.
+
+2004-01-25  Scott James Remnant  <scott@netsplit.com>
+
+	* NEWS: Include 1.5.2 release information.
+
+2004-01-22  Gary V. Vaughan  <gary@gnu.org>
+
+	This fixes a bug in the libtoolize ltdl source installation rules,
+	which were copying Makefile.in from the libtool tree into the
+	package running libtoolize.  Now we explicitly list the files to
+	copy to force the package to generate its own Makefile.in:
+
+	* libltdl/Makefile.am (libltdl_la_SOURCES, libltdlc_la_SOURCES):
+	Add ltdl.h.
+	(ltdldatadir): New variable for installation directory of
+	libtoolize --ltdl files.
+	(ltdldata_DATA): Tell automake what files to copy there at install
+	time (and remove at unistall time!).
+	(local-install-files): Removed.  This hack is not required
+	anymore, the automake generated install rules are much more
+	advanced than this.
+	* Makefile.am (install-data-hook, uninstall-local): Removed.
+	Libltdl files for libtoolize are installed by their own Makefile
+	now.
+
+2004-01-22  Jeff Squyres  <jsquyres@lam-mpi.org>
+
+	* m4/libtool.m4 (AC_LIBTOOL_PROG_CC_C_O): Some compilers
+	(e.g. Intel Linux icc compiler) write temporary files to the current
+	directory. These compilers do support -c and -o simultaneously but
+	wrongly fail the test due to the failure to create temporary
+	files. It is incorrect to penalize compilers which write temporary
+	files to the current directory so the 'chmod -w .' is therefore
+	removed.
+
+2004-01-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (LT_AC_PROG_EGREP): Wrapper for AC_PROG_GREP.
+	AIX has a brain-dead grep that only handles lines < 2048
+	characters.  Default GREP incase we are not using a future
+	autoconf that sets it for us :-)  Changed all callers to use $GREP
+	instead of grep, and to AC_REQUIRE LT_AC_PROG_EGREP.
+	Declare GREP as a libtool config var.
+	* ltmain.in: Use it.
+	* tests/sh.test (scripts): Accept `if $GREP "^foo=bar"' by
+	tightening the regexp.
+	Reported by Albert Chin-A-Young  <china@thewrittenword.com>
+
+2004-01-21  Nick Hudson  <skrll@netbsd.org>
+
+	* m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER) [netbsd*]: Remove
+	gratuitous ${libname}${release}${shared_ext} from
+	library_names_spec.
+
+2004-01-21  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (AC_PROG_LD_RELOAD_FLAG): On darwin change the
+	reload_cmds to use $CC, otherwise ld will thin out any fat
+	objects.
+
+2004-01-18  Benjamin Reed  <ranger@befunk.com>
+
+	* ltmain.in: Fix handling of frameworks in search paths.  Also
+	a one-liner fix to eval shrext in the libtool library search.
+
+2004-01-16  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.ac (AM_INIT_AUTOMAKE): Require 1.8 for bootstrap, or
+	else aclocal.m4 is huge, and m4 directory is not distributed.
+
+	* configure.ac (AC_CONFIG_HEADERS): Create config.h in
+	$top_srcdir.
+	* m4/ltdl.m4 (AC_LIB_LTDL): Run AC_CONFIG_HEADERS for the user if
+	necessary. Calculate filename from first argument to
+	AC_CONFIG_HEADERS, and substitute as CONFIG_H.
+	* libltdl/Makefile.am (AM_CPPFLAGS): Make sure we are searching in
+	$top_srcdir for headers.
+	(DEFS): Override the default HAVE_CONFIG_H with the config.h
+	filename.
+	(ltdl.lo): Reference config.h via $(CONFIG_H).
+	* libltdl/ltdl.c (HAVE_CONFIG_H): Ditto.
+
+2004-01-15  Scott James Remnant  <scott@netsplit.com>
+
+	* m4/lt~obsolete.m4: Add a file containing aclocal-fooling
+	macro definitions which stop the contents of an installed
+	libtool.m4 ending up in our aclocal.m4 when we bootstrap.
+	* Makefile.am (pkgmacro_DATA): Note that we don't need to add
+	lt~obsolete.m4 to this list.
+
+2004-01-12  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/libtool.m4 (_LT_COPYING): Factor out copyright message so it
+	only needs to be updated in one place.
+	(AC_LIBTOOL_CONFIG): Refactor to be more readable.  Only add
+	tags if a compiler was found; ie if you have no gcj compiler,
+	don't tack the GCJ tag onto the generated libtool script.
+
+2004-01-13  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4: Quote shrext as it is evaled in ltmain.
+
+2004-01-11  Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.in: new -precious-files-regex link mode option
+	to prevent removal of matching files from the temporary
+	output directory.
+	(Debian Bug #221420)
+	* doc/libtool.texi: document the new option.
+	* NEWS: announce the new option.
+
+2004-01-11  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in (func_copy_all_files): s/xfunc_copy/Xfunc_copy.
+	Now the test can actually succeed sometimes.
+
+2004-01-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in: Break out of the command argument parse loop when
+	-- is encountered.
+
+2004-01-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in (func_copy_all_files): s/test "x/test "X/ to keep
+	tests/sh.test happy.
+
+2004-01-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (aclocal_macros, aclocal_DATA): Removed.
+	(EXTRA_DIST): Remove m4 macro files; they are automatically
+	added by automake.
+	(pkgmacrodir): Where to install libtool macro files.
+	(pkgmacro_DATA): List installable libtool macro files.
+	(install-data-local): Remove previous versions of ltdl.m4 and
+	libtool.m4 from their old location.
+	* libtoolize.in: Use new pkgmacrodir installed macros when
+	libtoolizing a project.  Treat libtool.m4 and ltdl.m4 specially,
+	and func_serial_update() any other files from pkgmacrodir.
+	(pkgmacrodir): Where to find installed libtool macro files.
+	(aclocaldir): Removed.
+	(func_copy_all_files): Add an optional callback parameter to
+	control how files are copied.  If the callback is passed, don't
+	tell it whether it can copy or not.
+	(func_serial): Exchange parameters and make macro_regex optional,
+	so that this function can be used to extract serial numbers from
+	files with the traditional /^# serial [1-9][0-9]*$/ syntax.
+	Changed all callers.
+	(func_serial_update): Make macro_regex optional last parameter, so
+	that this function can be used as a callback for
+	func_copy_all_files().  Changed all callers.
+	* m4/ltsugar.m4: Add a serial number.
+
+2004-01-07  Gary V. Vaughan  <gary@gnu.org>
+
+	A complete rewrite of the m4 code involved in the generation of
+	libtool via config.status.  The old way involved manually
+	synchronising disparate bits of shell code in several macros, to
+	quote a copy of a shell variable, put that in config.status, maybe
+	add it to some quotation loops to prevent early expansion, and
+	then add a block to _LT_CONFIG_COMMANDS to bring it into the
+	libtool script.  The new way is to mark shell variables for
+	propogation using _LT_DECL for language independent variables, or
+	_LT_TAGDECL for those that need to be propogated in several
+	language flavours.  The marking can be done in the macro that
+	probes the variables, and this new m4 machinery takes care of
+	synchronising all the other bits of code at autoconf time:
+
+	* m4/ltsugar.m4:  New file.  Macros that are useful outside the
+	context of libtool.  Initially, contains some generalised list
+	management macros, and the scaffolding for dictionary type data
+	storage and retrieval.
+	* Makefile.am (aclocal_macros): Install ltsugar.m4.
+	* m4/libtool.m4 (_LT_DECL): Mark a shell variable for export to
+	the libtool script, along with a comment, and hints for quoting
+	and renaming.
+	(_LT_TAGDECL): Similarly mark a tagged shell variable for export
+	in each tag.
+	(lt_decl_tag_varnames, lt_decl_quote_varnames)
+	(lt_decl_dquote_varnames, lt_decl_varnames_tagged)
+	(lt_decl_all_varnames):  New utility macros for managing lists of
+	shell variable names from _LT_DECL and _LT_TAGDECL.
+	(_LT_CONFIG_STATUS_DECLARATIONS, _LT_CONFIG_STATUS_DECLARE):
+	Expand to correctly quoted variable declarations in config.status
+	from all marked shell variables.
+	(_LT_LIBTOOL_DECLARE): Expand to commented and quoted variable
+	declaration for libtool tag section.
+	(_LT_LIBTOOL_CONFIG_VARS, _LT_LIBTOOL_TAG_VARS): Pass all marked
+	variables to _LT_LIBTOOL_DECLARE.
+	(_LT_CONFIG_COMMANDS): Use _LT_CONFIG_STATUS_DECLARATIONS and
+	friends to generate all the variable passing shell code for
+	config.status, to get marked variables from libtool.m4 into
+	libtool itself eventually.
+	(AC_LIBTOOL_CONFIG): Generate marked variable code for libtool tag
+	configuration.  Changed all client macros to mark variables
+	suitably rather than the hand pasting that was necessary
+	previously.
+	(AC_PROG_SED): Renamed from LT_AC_PROG_SED.
+	(LT_AC_PROG_SED): Wrap AC_PROG_SED, and mark shell variables for
+	propogation to the libtool script.
+
+2004-01-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in (seen_gettext): Removed unused variable.
+
+2004-01-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.in (func_scan_files): Don't assume the existence of
+	aclocal.m4.  Make the comment more descriptive.
+	Reported by Alexandre Duret-Lutz <adl@src.lip6.fr>
+
+	* NEWS: Note libtoolize changes.
+
+	* ChangeLog.2003: New file, containing all the ChangeLog entries
+	from 2003.  Trimmed ChangeLog accordingly.
+
+	* ltmain.in: Output 2004 in the copyright from libtool --version.
+
+2004-01-03  Stefan Nordhausen  <nordhaus@informatik.hu-berlin.de>
+	Scott James Remnant  <scott@netsplit.com>
+
+	* ltmain.in: Don't use the mkdir -p option when creating a
+	temporary output directory so a symlink attack can't be used to
+	arbitrarily chmod other directories on the system if libtool
+	gets run as root.
+
+2004-01-02  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4: Ensure that ${ZSH_VERSION+set} is properly escaped.
+
+	* m4/libtool.m4 (CDPATH): Change the CDPATH setting so that it
+	allows for zsh differences, as noted in the autoconf manual's
+	Portable Shell - Special Shell Variables section.
+
+2004-01-02  Scott James Remnant  <scott@netsplit.com>
+
+	* .cvsignore: Ignore stamp-vcl created by the Makefile.
+
+2004-01-02  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+	Joe Orton  <joe@manyfish.co.uk>
+
+	* m4/libtool.m4 (AC_LIBTOOL_CONFIG): Add extra blackslash
+	in front of all the inner double-quotes as this is removed
+	on Solaris, IRIX and AIX leading to broken definitions
+	in config.status.
+
+2004-01-02  Scott James Remnant  <scott@netsplit.com>
+
+	* NEWS: Next release will be in 2004.
+
+Continued in ChangeLog.2003
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2005 b/ChangeLog.2005
new file mode 100644
index 0000000..55c30a1
--- /dev/null
+++ b/ChangeLog.2005
@@ -0,0 +1,2803 @@
+2005-12-29  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (libtoolize): Also depend on `config.status'.
+	(tests/atconfig): Normalize path, for non-GNU make.
+	Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link) <temp_rpath>:
+	Fix position of separator for shlibpath_var setting in shell
+	wrapper.
+
+	* libltdl/lt_error.c (error_strings): Remove parentheses around
+	string literal initializers, uncovered by `tcc'.
+	Reported by Edward Chernenko <edwardspec@yahoo.com>.
+
+2005-12-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* .cvsignore, libltdl/.cvsignore, tests/.cvsignore: Ignore
+	+build, +dest, +inst, .cvslog-tlasync, .gdb_history, .pc,
+	libltdl/INSTALL, libltdl/stamp-mk and tests/testsuite.log.
+
+2005-12-20  Eric Blake  <ebb9@byu.net>
+
+	* README.alpha: Really commit.
+
+2005-12-19  Eric Blake  <ebb9@byu.net>
+
+	* HACKING (release note templates): Update anon cvs location.
+	* README.alpha (Reporting Bugs): Likewise.
+
+2005-12-18  Jacob Meuser <jakemsr@jakemsr.com>,
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Move library
+	search paths that coincide with paths to not yet installed
+	libraries to the beginning of the library search list.
+
+2005-12-18  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* THANKS: Updated.
+
+	* HACKING: `./libtool --config' is more helpful than `--help'.
+
+	* libltdl/config/ltmain.m4sh <preserve_args, linknames>:
+	Initialize properly.
+
+2005-12-18  Kean Johnston  <jkj@sco.com>,
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (LT_PATH_NM): Also look in
+	/usr/ccs/bin/elf, for SCO.  If we are not cross-compiling, but
+	$ac_tool_prefix is set, also try an un-prefixed `nm'.
+
+2005-12-18  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG)
+	<hardcode_shlibpath_var>: Initialize, to `unsupported'.
+
+2005-12-18  Marc Espie  <espie@nerim.net>
+
+	* libltdl/m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER)
+	[ openbsd ] <sys_lib_dlsearch_path_spec>: Set to `/usr/lib'
+	only.
+
+2005-12-16  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/old-m4-iface.at: Require Autoconf-2.50, so that
+	Debian's autoconf wrapper will not cause 2.13 to barf over
+	`--force'.
+	Reported by Kurt Roeckx <kurt@roeckx.be>.
+
+	* README.alpha (Reporting bugs): Suggest to also bootstrap the
+	libltdl subdirectory -- the Makefile will enforce it anyway.
+	(The Test Suite): Renamed to..
+	(The Test Suites): ..this.  Introduce the new Autotest test
+	suite, how to run each one individually, and what to report.
+	* README (The Test Suite): Likewise.
+
+2005-12-16  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	In the subpackage case, we do not install Makefile.inc.  Since
+	we have to be correct for this case, remove `Makefile.inc' from
+	EXTRA_DIST.  Recursive mode does not use it either.  Since
+	nonrecursive mode requires an Automake >= 1.7 anyway, and those
+	versions automatically distribute included makefile fragments,
+	we don't need to cater for that one either.
+
+	* libltdl/Makefile.inc (EXTRA_DIST): Remove Makefile.inc.
+	Reorder other entries.
+
+2005-12-16  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (libltdl/Makefile.in): also depend on
+	libltdl/aclocal.m4, so that we guarantee timestamp consistency.
+	(libltdl/stamp-mk): New target, to fix `libltdl/Makefile.in'.
+	(EXTRA_DIST): Distribute `libltdl/stamp-mk' and
+	`libltdl/m4/lt~obsolete.m4'.
+	(all-local): Ensure the stamp files is up to date.
+	(libltdl/aclocal.m4): New target, to ensure timestamp
+	consistency.  Depend on all m4 files.
+	* HACKING: Updated.
+
+	* tests/testsuite.at (PREPARE_TESTS): New variable `tst_dist',
+	default to empty.
+	* tests/nonrecursive.at, tests/recursive.at,
+	tests/standalone.at, tests/subproject.at: Use it in
+	LT_AT_BOOTSTRAP or LT_AT_MAKE, so that you can optionally test
+	redistribution within the tests.
+
+	* libltdl/m4/lt~obsolete.m4: Update documentation for aclocal
+	versions before 1.7.  Change all macros to use AC_DEFUN instead
+	of AU_DEFUN.
+	* (_AC_PROG_LIBTOOL, AC_LIBTOOL_SETUP, _LT_AC_CHECK_DLFCN)
+	(AC_LIBTOOL_SYS_DYNAMIC_LINKER, _LT_AC_TAGCONFIG)
+	(AC_DISABLE_FAST_INSTALL, _LT_AC_LANG_CXX, _LT_AC_LANG_F77)
+	(_LT_AC_LANG_GCJ, AC_LIBTOOL_RC, AC_LIBTOOL_LANG_C_CONFIG)
+	(_LT_AC_LANG_C_CONFIG, AC_LIBTOOL_LANG_CXX_CONFIG)
+	(_LT_AC_LANG_CXX_CONFIG, AC_LIBTOOL_LANG_F77_CONFIG)
+	(_LT_AC_LANG_F77_CONFIG, AC_LIBTOOL_LANG_GCJ_CONFIG)
+	(_LT_AC_LANG_GCJ_CONFIG, AC_LIBTOOL_LANG_RC_CONFIG)
+	(_LT_AC_LANG_RC_CONFIG, AC_LIBTOOL_CONFIG)
+	(_LT_AC_FILE_LTDLL_C): Add new fake macros for these, they
+	were used at one time in libtool.m4.
+
+	* tests/am-subdir.at (Makefile.am): Put automake options here,
+	in AUTOMAKE_OPTIONS.  Require 1.6 because of the newer
+	`AC_INIT(pkgname,version) AM_INIT_AUTOMAKE' scheme.
+	* tests/nonrecursive.at, tests/recursive.at: Require 1.7,
+	because libltdl rules use `+=' in conditionals.
+	* tests/testsuite.at (LT_AT_AUTOMAKE): Fix indenting.
+	(LT_AT_AUTORECONF): also detect too old Automake.
+
+2005-12-08  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/libltdl/lt__alloc.h (FREE): Cast away constness of
+	argument to `free' to avoid compiler warning.
+
+2005-12-08  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG, _LT_LINKER_SHLIBS)
+	[darwin]: Use $LTCC $LTCFLAGS to check for -single_module.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+2005-12-07  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* bootstrap: always remove Makefile, to avoid triggering the
+	autotools rebuild rules before autoreconf builds these.
+	Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>.
+
+2005-12-07  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/config/ltmain.m4sh, libltdl/m4/libtool.m4 [darwin]:
+	Use -single_module by default when linking shared libraries. Can
+	be overridden by specifying -multi-module or by setting the env
+	var LT_MULTI_MODULE before configure.
+	* libltdl/m4/libtool.m4 (archive_expsyms_cmds) [darwin]:
+	Simplify.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+2005-12-04  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (References): Do not use `@/' for the benefit
+	of older `makeinfo', break lines instead.
+
+	* Makefile.am (install-data-local): No continuation here.
+	(dist-hook): Fix copying of README.alpha to README.
+	* tests/early-libtool.at (configure.ac): Remove
+	`AM_INIT_AUTOMAKE', we do not use automake in these tests.
+
+	* README, README.alpha, libtoolize.m4sh: Typos.
+	* tests/am-subdir.at, tests/duplicate_members.at: Make all
+	banners end with a dot, for symmetry.
+
+	* libtoolize.m4sh (func_copy_all_files)
+	(glob_exclude_pkgaux_files): Removed, since unused.
+
+	* libtoolize.m4sh (func_copy_cb, func_copy_some_files)
+	(func_serial_update, func_keyword_update): Fail immediately
+	if some file we may install does not exist.
+	Reported by Troy Benjegerdes <hozer@hozed.org>.
+
+2005-12-03  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* TODO: A bunch of items fixed. :)
+
+	* tests/convenience.at: Updated to expose more corner cases.
+
+	* doc/libtool.texi (Invoking libtoolize): Remove mention of
+	the nonrecursive restriction to name the directory `libltdl'.
+
+	* libtoolize.m4sh (func_fixup_Makefile_inc): New function.
+	(main): Call it in nonrecursive mode to mangle Makefile.inc.
+	* tests/nonrecursive.at: adjusted to test this.
+
+2005-12-03  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	Basic support for PIE (position-independent executables).
+
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms):
+	Don't pass PIE flag for compilation of the symbol file object.
+	(func_mode_compile): Pass PIE flag only for non-PIC objects.
+	* NEWS: Updated.
+
+2005-12-03  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/general.m4sh (func_show_eval): Rewrite use of
+	the failure expression, because the exit status of the previous
+	command may not be preserved in the next `eval' by some shells,
+	such as pdksh.
+	* libltdl/config/ltmain.m4sh (func_extract_an_archive):
+	Use func_show_eval correctly.
+	(func_mode_link): Likewise.  Also, do not use `$status'.
+	* tests/fail.at: New set of tests to ensure libtool fails.
+	* Makefile.am, tests/testsuite.at: Adjusted.
+
+2005-11-26  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 [darwin]: Use $LTCC $LTCFLAGS to create
+	reloadable objects.
+
+2005-11-25  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/Makefile.inc (libltdl/argz.h): Create libltdl
+	directory if it does not exist yet.  Take care that munging
+	of the file will not mess up the build rule.
+	Reported by Peter O'Gorman <peter@pogma.com>.
+
+2005-11-25  Eric Blake  <ebb9@byu.net>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/loaders/loadlibrary.c (iface_id): New variable.
+	(get_vtable): Get an `iface_id' from `lt_dlinterface_register'.
+	(get_vtable): Rewrite to catch up with lt_dlhandle_iterate
+	interface change.  Append dot only after w32 path conversion
+	so it works on cygwin managed mounts.
+
+	* libltdl/ltdl.h, libltdl/ltdl.c (lt_dlinterface_free): New
+	function.
+	* doc/libtool.texi (User defined module data): Document it.
+
+2005-11-25  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 [aix] <archive_expsym_cmds>
+	(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG): Always move -bnoentry
+	before $compiler_flags, so it can be overridden.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Allow GCC
+	response files through.
+
+2005-11-25  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Pass through
+	-isysroot for cross architecture builds on darwin.
+
+2005-11-24  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_uninstall): In clean
+	mode, don't remove non-existent libfoo.lai.
+
+2005-11-20  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (aclocalfiles): Also install lt~obsolete.m4.
+	* libtoolize.m4sh (func_check_macros): Updated.
+	* tests/libtoolize.at: Adjusted.
+
+2005-11-20  Eric Blake  <ebb9@byu.net>,
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* bootstrap (--help): Provide some help.
+
+2005-11-20  Todd Vierling <tv@netbsd.org>,
+	    Thorsten Glaser <tg@mirbsd.org>
+
+	* libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN, _LT_SYS_DYNAMIC_LINKER)
+	(_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG) [ interix3 ]: Support for Interix/Microsoft
+	Services for Unix.
+	* libltdl/m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS): Likewise.
+	* NEWS: Updated.
+
+2005-11-20  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/link-order.at [ interix ]: Skip command line grep.
+	* tests/deplibs-ident.at [ interix ]: Not broken here.
+	Reported by Thorsten Glaser <tg@66h.42h.de>.
+
+2005-11-18  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libtoolize.m4sh (func_copy_all_files)
+	(func_massage_aclocal_DATA, func_massage_pkgltdl_files)
+	(func_massage_pkgconfig_files): Work around ksh limitation.
+	Reported by Thorsten Glaser <tg@66h.42h.de>.
+
+2005-11-14  Albert Chin  <china@thewrittenword.com>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[ hpux11 ]: Pass +nodefaultrpath when linking on ia64*.
+
+2005-11-14  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	Testsuite portability update round.
+
+	* tests/inherited_flags: skip when shared libs are disabled.
+	* tests/deplibs-ident.at [ aix ]: No unexpected failure here.
+	* tests/libtoolize.at: Fix for distcheck (readonly sources).
+	* tests/nonrecursive.at, tests/recursive.at, tests/subproject.at
+	(foo.c): Actually export a symbol, for AIX.
+	* tests/old-m4-iface.at: Use AC_LIBTOOL_DLOPEN, for AIX.
+	* tests/nonrecursive.at: Set foo_la_SOURCES, for automake-1.7.
+	* tests/subproject.at: Require automake-1.9, we use indirect
+	subdirs.
+	* tests/am-subdir.at: Move AT_KEYWORDS settings..
+	* tests/testsuite.at: ..here, in respective macros.
+	(LT_AT_AUTOMAKE): Skip if we detect failure due to old version.
+	(PREPARE_TESTS): Set autotool variables to `no' if not present.
+	(LT_AT_ACLOCAL, LT_AT_AUTOCONF, LT_AT_AUTOMAKE)
+	(LT_AT_AUTOHEADER, LT_AT_AUTORECONF): Use to XFAIL tests.
+	Reported by Tim Rice <tim@multitalents.net>.
+	(LT_AT_MAKE): Do not use `make -e'.
+	(_LTDL_PROJECT_FILES): Adjust sub-make call.  Work around `make'
+	which does not set `MAKE' or `SHELL'.  Fix for user-set
+	`CONFIG_SHELL'.
+	Reported by Charles Wilson <cygwin@cwilson.fastmail.fm>.
+
+	* libltdl/m4/lt~obsolete.m4 (_LT_CC_BASENAME)
+	(_LT_COMPILER_BOILERPLATE, _LT_LINKER_BOILERPLATE):
+	Added because they were added to branch-1-5 AC_DEFUNed.
+	* HACKING: Add note about lt~obsolete.m4.
+
+	* Makefile.am, libltdl/Makefile.inc (INSTALL_LTDL):
+	For nonrecursive mode, add to include_HEADERS as well.
+	* doc/libtool.texi (Invoking libtoolize, Distributing libltdl),
+	tests/nonrecursive.at: Adjusted, and removed TABS from .texi.
+
+	* libtoolize.m4sh: Revert use of `$tst_aclocaldir'.
+
+2005-11-13  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/ltdl.c (lt_dlhandle_iterate): Fix endless loop.
+	(lt_dlinterface_register): Fail if lt__strdup did.
+
+2005-11-13  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LANG_C_CONFIG):
+	Removed `lt_prog_cc_shlib' cruft, not needed any more.
+
+2005-11-13  Kean Johnston  <jkj@sco.com>,
+	    Tim Rice  <tim@multitalents.net>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_C_CONFIG, _LT_LANG_CXX_CONFIG)
+	[ sco3.2v5, sysv4, sysv4.3, sysv5, sco3.2v5, sco5v6, unixware,
+	OpenUNIX, sysv4*uw2 ]: Complete overhaul of SCO support.
+	* THANKS: Updated.
+
+2005-11-13  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/quote.test: Do not fail on harmless shell bug present
+	in some ksh versions.
+	Reported by Tim Rice <tim@multitalents.net> and others.
+
+2005-11-12  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltoptions.m4 (_LT_SET_OPTION): Use m4_warning
+	instead of m4_warn.
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC): `wl' is tagged here.
+
+	* libltdl/m4/libtool.m4 (LT_SYS_DLOPEN_SELF, _LT_COMPILER_PIC):
+	Make sure `$wl' is properly expanded for tests involving
+	`export_dynamic_flag_spec', `lt_prog_compiler_static'.
+
+	* tests/defs.m4sh (func_configure): Actually pass
+	options (like --disable-shared) to func_configure_nofail.
+
+2005-11-11  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [ freebsd ]:
+	Fix shlibpath_overrides_runpath settings.
+	Reported by Dave Benson <daveb@idealab.com>.
+
+2005-09-10  Charles Wilson  <cygwin@cwilson.fastmail.fm>
+
+	* libltdl/config/ltmain.m4sh (func_win32_libid): use $SED not
+	sed.
+	
+2005-11-10  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG) [ hpux10, hpux11 ]
+	<hppa*64,ia64, aCC,g++>:
+	Use C++ compiler for linking rather than ld.
+
+2005-11-10  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltsugar.m4 (lt_join, lt_combine, lt_dict_filter):
+	Rewrite to eliminate tail recursion; use ..
+	(lt_unquote): New trivial helper macro.
+	* libltdl/m4/libtool.m4 (_lt_decl_filter): Document.
+
+2005-11-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/testsuite.ac (macrodir): Don't set it here...
+	* Makefile.am (BUILDCHECK_ENVIRONMENT, INSTALLCHECK_ENVIRONMENT):
+	...set it here to pick up files from the right place in context.
+	* tests/libtoolize.at, tests/old-m4-iface.at: Adjust.
+	* libtoolize.m4sh: Take tst_aclocaldir into account when running
+	inside the test harness.
+
+2005-11-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/am-subdir.at: Now that we don't run autoreconf, we have to
+	explicitly tell aclocal what flags to use.
+
+	* tests/testsuite.at (LT_AT_BOOTSTRAP): Allow passing arguments to
+	configure.
+	* tests/am-subdir.at, tests/nonrecursive.at, tests/old-m4-iface.at,
+	tests/subproject.at: Use LT_AT_BOOTSTRAP.
+
+2005-11-09  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS): Also set pic_flag.
+	(_LT_LANG_CXX_CONFIG): Use $as_unset, not unset.
+	(_LT_LANG_F77_CONFIG, _LT_LANG_FC_CONFIG): Remove bogus
+	ld_shlibs tests.
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS): Move setting of
+	`variables_saved_for_relink'..
+	(_LT_SYS_DYNAMIC_LINKER): here, when both `shlibpath_var'
+	and `runpath_var' have been set.
+	Reported by Mike Frysinger <vapier@gentoo.org>.
+
+	* libltdl/Makefile.inc (AM_CPPFLAGS): Do not define
+	HAVE_CONFIG_H.
+	* libltdl/m4/ltdl.m4 (LTDL_INIT): Do not invoke
+	AC_CONFIG_HEADERS ourselves, we can build with or without now.
+
+2005-11-07  Kean Johnston  <jkj@sco.com>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link) [ sysv4*uw2*,
+	unixware7* ]: Work around linker bug on older SCO systems.
+
+2005-11-07  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG) [ hpux10, hpux11 ]:
+	hardcode_libdir_flag_spec and hardcode_minus_L are the same for
+	hppa*64 and ia64*. Don't set
+	hardcode_libdir_flag_spec='-L$libdir' on ia64* because if you
+	specify +b and -L, +b overrides what is set into DT_RPATH.
+
+2005-11-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/testsuite.at (_LTDL_PROJECT_FILES): Factored out from
+	common code to build a basic libltdl using project.
+	* tests/old-m4-iface.at, tests/standalone.at, tests/subproject.at:
+	Use it.
+
+	* doc/libtool.texi (Distributing libltdl): Document correct use of
+	LT_CONFIG_LTDL_DIR mode argument with Autoconf and Automake.
+
+2005-11-07  Gary V. Vaughan  <gary@gnu.org>
+
+	Support 'recursive' mode for building libltdl: Automake will
+	recursively descend into the libltdl directory, and use libltdl's
+	Makefile.am code to build libltdl:
+
+	* ltdl.m4 (LT_CONFIG_LTDL_DIR): Don't barf on 'recursive' mode
+	for 2nd argument.
+	(_LTDL_MODE_DISPATCH): Handle recursive mode.
+
+2005-11-07  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/recursive.at: New tests for libltdl as a subdirectory,
+	configured and compiled from the toplevel project using a
+	recursive make..
+	* tests/testsuite.at: Use it.
+	* Makefile.am (TESTSUITE_AT): Depend on it.
+
+	* libltdl/m4/ltdl.m4 (LTDL_INIT): Don't force running
+	AC_CONFIG_HEADERS for subproject ltdl.
+	* tests/old-m4-iface.at, tests/subproject.at: Remove workaround.
+
+	* libltdl/m4/ltdl.m4 (LT_CONFIG_LTDL_DIR): Add LTDL-MODE
+	argument.
+	* configure.ac: Use it.
+
+2005-11-06  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_TRY_DLOPEN_SELF): lt_unknown is
+	lt_dlunknown.
+
+	* libltdl/m4/libtool.m4 (LT_SYS_DLOPEN_SELF): Revert
+	expansion of `$wl'.
+	(_LT_LANG_C_CONFIG, _LT_LANG_CXX_CONFIG, _LT_LANG_GCJ_CONFIG):
+	Do not require LT_SYS_DLOPEN_SELF.
+	(_LT_LANG_C_CONFIG): Instead call it at the right time.
+	(_LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG, _LT_LANG_FC_CONFIG)
+	(_LT_LANG_GCJ_CONFIG): Do not call _LT_CMD_STRIPLIB.
+
+	* Makefile.am: `2>&1' as suggested by Albert Chin.
+	* libltdl/m4/libtool.m4, libltdl/m4/ltdl.m4:
+	Two newlines before each macro, fix underlines.
+
+2005-11-05  Kean Johnston  <jkj@sco.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link) [*-*-sco3.2v5*]:
+	Don't pass through -lc, nor add it to deplibs.
+	[*-*-sysv5*]: Ditto.
+	[*-*-openbsd*, *-*-freebsd*, *-*-dragonfly*]: Remove bogus
+	`$arg'.
+
+2005-11-04  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* THANKS: Updated.
+
+2005-11-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/nonrecursive.at: New tests for libltdl as a subdirectory,
+	configured and compiled from the toplevel project.
+	* tests/testsuite.at: Use it.
+	(LT_AT_AUTOHEADER): New macro.
+	* Makefile.am (TESTSUITE_AT): Depend on nonrecursive.at.
+
+2005-11-01  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_ENABLE_LOCK) [ solaris ]: Add `-64'
+	to $LD if necessary, to permit combining of several convenience
+	libs without any further objects added.
+	Reported by Brian Barrett <brbarret@open-mpi.org>.
+
+2005-11-01  Kean Johnston  <jkj@sco.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (LT_SYS_DLOPEN_SELF): Use
+	`lt_prog_compile_static', not `link_static_flag'.  Expand `$wl'
+	so expansion of `export_dynamic_flag_spec' works.
+	(_LT_TRY_DLOPEN_SELF): Show dlerror() in case of failure.
+	(_LT_LINKER_SHLIBS) [ aix3 ]: Likewise.
+	(_LT_COMPILER_PIC) [ hpux* ]: Use `${wl}'.
+
+2005-11-01  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* THANKS: Updated.
+
+2005-11-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/ltdl.m4 (LTDL_INIT): Call _LT_ENABLE_INSTALL directly
+	instead of m4_requiring it, as it relies on enable_ltdl_install
+	and enable_ltdl_convenience to have been initialised first.
+
+	* libtoolize.m4sh: Use serial tags to locate the correct serial
+	numbers when deciding whether to update.
+	(func_serial): Allow for macro_regex argument to be originating
+	file name.
+	(func_serial_update): Use NL2SP to flatten list of extracted
+	m4_include files.
+	* tests/libtoolize.at: More tests for old-style verbatim copying
+	of macros into aclocal.m4.
+
+	* libltdl/m4/argz.m4, libltdl/m4/ltoptions.m4, libltdl/ltsugar.m4,
+	libltdl/m4/ltversion.in: Add serial number tags, and bump serial
+	number.
+
+2005-10-31  Kean Johnston  <jkj@sco.com>
+
+	[ sysv5*, sco3.2v5*, sco5v6*, unixware*, OpenUNIX*, sysv4*uw2* ]
+	Patches for various bug fixes, small improvements and updating
+	the SCO platform support.
+
+	* libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN): Set correctly for SCO.
+
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Set correct
+	symcode values for the native nm on SCO platforms.
+
+	* libltdl/m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS): All SCO platforms
+	open dependency libraries when you dlopen a module.
+
+2005-10-31  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[ aix ]: Remove duplicate always_export_symbols=yes for AIX.
+
+2005-10-29  Howard Chu  <hyc@highlandsun.com>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link):
+	With `-static', only link statically against uninstalled
+	libtool libraries.  Fixes 1.5.x regression to match documented
+	behavior.
+	* NEWS: Updated.
+
+2005-10-27  Stepan Kasal  <kasal@ucw.cz>
+
+	* HACKING: Update note about use of `$#' in m4 macros.
+
+2005-10-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/tagtrace.test: Allow `$AUTOCONF' to contain arguments.
+	Skip if the running `autoconf' version is older than the one
+	used to bootstrap Libtool.
+
+2005-10-26  Eric Blake  <ebb9@byu.net>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (vcl-tmp): Avoid warnings from diff.
+	* bootstrap: Avoid warnings from find.
+	(lt_tab): Use to prevent editor whitespace "cleanup".
+
+2005-10-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh: Put back the func_serial_update callback for
+	func_copy_some_files so that the testsuite passes again.  We'll
+	have to find a better way of handling serial numbers in libtool
+	macro files.
+
+	* libltdl/Makefile.inc: New file, factored out of Makefile.am for
+	use in non-recursive libltdl installations.
+	* bootstrap: Adjust.
+	* Makefile.am: include it.
+	(libltdl/Makefile.am): Adjust to build from the new
+	libltdl/Makefile.inc.
+	(SUBDIR_LIBOBJS): Renamed from this...
+	(LTDL_SUBDIR_LIBOBJS): ...to this.
+	* configure.ac: Adjust.
+	* doc/libtool.texi (Invoking libtoolize): Document the new modes
+	and libtoolize option to select them.
+	* libtoolize.m4sh: Parse new options, --nonrecursive, --recursive
+	and --subproject.  Install the appropriate files with --ltdl
+	according to the selected mode.
+	(func_scan_files): If --subproject, --recursive or --nonrecursive
+	options were not given, use the value from LT_CONFIG_LTDL_DIR; if
+	a mode was given, and there is also an argument to
+	LT_CONFIG_LTDL_DIR, ensure they are the same.
+	* NEWS: Updated.
+
+	* libtoolize.m4sh: Don't use func_serial_update as a copy
+	function for libtool m4 files with no macro_regex.  If the
+	files are copied directly into aclocal.m4, because
+	AC_CONFIG_MACRO_DIR isn't set for example, there is no way
+	to tell what serial number goes with what source file.
+	(func_serial_update): For future-proofing, only make the second
+	serial number check if the destination file wasn't m4_included
+	into aclocal.m4 (and hence updated automatically by the cat of
+	copying a new version to the dest directory).
+
+	* libtoolize.m4sh: Move the consistency checks...
+	(func_check_macros): ...into here.  Also suggest LT_WITH_LTDL if
+	appropriate.
+
+	* libtoolize.m4sh: Copying just libtool.m4 for hand maintained
+	aclocal.m4 doesn't work.  List all required files in that case,
+	using the files from installed libltdl if available.  Also, list
+	the additional files required when using libltdl.
+	Reported by Patrick Welche <prlw1@newn.cam.ac.uk>.
+
+	* libltdl/ltdl.h, libltdl/ltdl.c (lt_dlhandle_first): Removed.
+	* libltdl/ltdl.h, libltdl/ltdl.c (lt_dlhandle_next)
+	(lt_dlhandle_find, lt_dlforeach): Removed...
+	(lt_dlhandle_iterate, lt_dlhandle_fetch, lt_dlhandle_map): Similar
+	functions that are multi-loader safe, and require a registered
+	interface validator argument.
+	* doc/libtool.texi: Updated.
+	* NEWS: Updated.
+
+	* libtoolize.m4sh: Always copy pkgconfig_files for --ltdl, incase
+	ltdl needs additional things not found by automake when looking at
+	the parent project configury.
+	* tests/libtoolize.at: Adjust.
+
+2005-10-17  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh [darwin]: Don't check for "bundle"
+	in file path.
+	Reported by Christoph Egger <Christoph_Egger@gmx.de>.
+
+2005-10-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/ltdl.m4 (LT_WITH_LTDL): Don't nest AC_MSG_CHECKING/
+	AC_MSG_RESULT pairs.
+
+2005-10-14  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/subproject.at: Move 'touch config.h.in' invocation.
+
+	* tests/subproject.at (_LTDL_SETUP): Use pushdef/popdef to
+	simulate file-local scope.  Empty source file compilation is not
+	portable, so add minimal code to generated foo.c file.
+
+2005-10-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (LT_PATH_NM): End test source with
+	newline.
+	Reported by Charles Wilson <cygwin@cwilson.fastmail.fm>.
+
+2005-10-13  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/ltdl.c (find_module): Check that dir is set.
+	(load_deplibs): Don't free the user search paths too early.
+
+2005-10-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/testsuite.at (LT_AT_AUTOMAKE): New macro.
+	* tests/subproject.at: Use it.  Do not call `autoreconf' in
+	tests, since it will try to reconfigure `sub/ltdl', which
+	breaks `make check' during `distcheck' because of a readonly
+	source tree.
+
+	* libltdl/m4/ltdl.m4 (LT_WITH_LTDL): Also set INCLTDL.
+
+	* libltdl/m4/ltdl.m4 (LTDL_CONVENIENCE, LTDL_INSTALLABLE)
+	(LT_WITH_LTDL): Revert Gary's 2005-10-10 patch.
+
+	* tests/stresstest.at: Use `allow_undefined_flag' instead of
+	host_os setting.
+
+2005-10-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/ltdl.m4 (_LT_ENABLE_INSTALL): Remove bogus extra
+	closing brackets.
+
+2005-10-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/ltdl.m4 (LTDL_CONVENIENCE, LTDL_INSTALLABLE): Remove
+	AC_SUBST of LIBLTDL, LTDLINCL, and all mention of INCLTDL.
+	(LT_WITH_LTDL): Due to order constraints between LTDL_CONVENIENCE,
+	LTDL_INSTALLABLE, LT_WITH_LTDL & LTDL_INIT, we can safely AC_SUBST
+	LIBLTDL and LTDLINCL here.  Also, remember to synch INCLTDL.
+
+2005-10-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/stresstest.at [ aix3, beos, os2 ]: Always use
+	`-no-undefined'.
+
+2005-10-09  Christian Biesinger  <cbiesinger@web.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG) [ beos ]:
+	Initial shared library support for C++.
+
+2005-10-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* configure.ac (abs_top_builddir, abs_top_srcdir): always
+	substitute.
+	* Makefile.am (BUILDCHECK_ENVIRONMENT)
+	(INSTALLCHECK_ENVIRONMENT): New macros.  Set _lt_pkgdatadir,
+	LIBTOOL, LIBTOOLIZE accordingly, by using above, and
+	program_transform_name.
+	* tests/testsuite.at (TESTS_PREPARE): Do not set them anymore.
+	Set $unset.
+	(LT_AT_MAKE): Use to unset LIBTOOL and LIBTOOLIZE.
+
+2005-10-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/subproject.at: Commit the right file this time.
+
+2005-10-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG): Fix m4 quoting
+	for lt_simple_link_test_code.
+	Reported by Nicolas Joly <njoly@pasteur.fr>.
+
+2005-10-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/subproject.at: New tests for libltdl as a subproject with
+	its own configuration.
+	* tests/testsuite.at: Use it.
+	* Makefile.am (TESTSUITE_AT): Depend on it.
+
+2005-10-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am: Simplify.  Do not use abs_top_srcdir.
+	Reported by Gary V. Vaughan <gary@gnu.org>.
+
+2005-10-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/ltdl.m4 (_LT_CONFIG_LTDL_DIR): Spurious './' prefixes
+	upset BSD pmake, don't set lt_ltdl_dir in this case.
+	(LTDL_CONVENIENCE, LTDL_INSTALLABLE): Adjust.
+
+2005-10-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (BUILDCHECK_ENVIRONMENT)
+	(INSTALLCHECK_ENVIRONMENT): New macros.
+	(check-local, installcheck-local): Use them.
+	* tests/testsuite.at (PREPARE_TESTS): Extract host_alias, ECHO.
+	Set configure_options appropriately.
+	(LT_AT_CONFIGURE, LT_AT_AUTORECONF, LT_AT_MAKE): New macros.
+	(LT_AT_BOOTSTRAP): Use them.
+	* tests/am-subdir.at, tests/early-libtool.at,
+	tests/old-m4-iface.at, tests/standalone.at: Likewise.
+	* tests/link-order.test: Do not extract ECHO any more.
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER): Require
+	AC_CANONICAL_HOST and _LT_DECL_SED.
+
+2005-10-03  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/ltdl.m4: Bump serial as we are changing the
+	interface.
+	(LT_CONFIG_LTDL_DIR): New macro to centralise setting the
+	subdirectory used for libltdl.
+	(LTDL_CONVENIENCE): Continue backwards compatibility support for
+	declaring the libltdl source subdirectory with an argument, but
+	defer to LT_CONFIG_LTDL_DIR.
+	(AC_LIBLTDL_CONVENIENCE): Adjust to upgrade to the new style.
+	(LTDL_INSTALLABLE, AC_LIBLTDL_INSTALLABLE): Ditto.
+	(LTDL_INIT): lt_ltdl_dir is set by LT_CONFIG_LTDL_DIR now, and
+	even `./' needs trailing slashes trimming!  If the user didn't
+	upgrade their configure.ac yet, call LT_CONFIG_LTDL_DIR for them.
+	* libtoolize.m4sh (func_scan_files): If --ltdl option is given
+	without a directory argument, use the value from
+	LT_CONFIG_LTDL_DIR; if the argument is given, and there is also a
+	value in LT_CONFIG_LTDL_DIR, ensure they are the same.
+	* libltdl/configure.ac: Use it.
+	* NEWS: Updated.
+
+2005-10-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/old-m4-iface.at (Makefile.in): Do not reconfigure
+	libltdl directory.
+
+2005-09-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/deplibs-ident.at: New file with XFAIL test to expose
+	wrong multiple listing of a deplib on the command line.
+	* Makefile.am, tests/testsuite.at: Updated.
+	Reported by Brian Barrett <brbarret@open-mpi.org>.
+
+	* tests/old-m4-iface.at: Define top_srcdir, work around current
+	ltdl.m4 bug.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link):
+	Fix wrong logic introduced in last commit.
+
+2005-09-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/libtoolize.at: Add a new test to catch a regression I
+	almost introduced with respect to copying macro files when
+	AC_CONFIG_MACRO_DIR is shared with libltdl subproject.
+
+2005-09-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/old-m4-iface.at: Start of a new test series for m4
+	interface backwards compatibility.
+	* tests/testsuite.at: Use it.
+	(macrodir): Declare the location of uninstalled libtool m4 macros.
+	* Makefile.am (TESTSUITE_AT): Depend on it.
+
+2005-09-29  Tim Rice  <tim@multitalents.net>  (tiny change)
+
+	* tests/early-libtool.at (Makefile.in): Set $(SHELL).
+
+2005-09-29  Peter Ekberg  <peda@lysator.liu.se>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Don't modify
+	user provided symbols file. Adjust removal of temporary files
+	and also remove temporary files used during symbols file
+	filtering.
+
+2005-09-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libtoolize.m4sh (func_included_files): Do not recurse
+	non-existent files.
+
+2005-09-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_scan_files): Support projects that have
+	upgraded libtool, but still use an old autoconf.  When the libtool
+	macros are not copied (because of missing ACLOCAL_AMFLAGS and
+	AC_CONFIG_MACRO_DIR ), point them at the libtoolize master tree
+	for files to manually copy into acinclude.m4 or aclocal.m4.
+
+	* libltdl/lt_error.c (lt__last_error, lt__error_strings): The lt__
+	prefix is used to indicate internal symbols that are only exported
+	for use by other parts of libltdl.  These are now static, so...
+	(last_error, error_strings): ...renamed to this.  Changed all
+	callers.
+
+	* libltdl/ltdl.h (lt_dlmutex_register, lt_dlmutex_lock)
+	(lt_dlmutex_unlock, lt_dlmutex_seterror, lt_dlmutex_geterror)
+	(lt_dlmalloc, lt_dlrealloc, lt_dlfree): Remove deprecated APIs.
+	* doc/libtool.tex: Updated.
+	* NEWS: Updated.
+
+	* libltdl/ltdl.c (lt_dlcaller_register): Renamed to avoid problems
+	with module visibilty when linked with programs written for the
+	old API.
+	(lt_dlinterface_register): New name.
+	* Makefile.am (VERSION_INFO): Bumped.
+	* doc/libtool.texi (User defined module data): Updated.
+
+2005-09-27  Tim Rice  <tim@multitalents.net>
+
+	* tests/defs.m4sh, tests/testsuite.at (PREPARE_TESTS)
+	<AUTORECONF>: Allow variable override.
+
+2005-09-26  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* HACKING: Only update libltdl version info before release.
+
+2005-09-26  Tim Rice  <tim@multitalents.net>
+
+	* configure.ac <AUTOM4TE>: Allow variable override.
+
+2005-09-25  Alan W. Irwin  <irwin@beluga.phys.uvic.ca>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_win32_libid)
+	[ cygwin, mingw ]: Robustify sed script to determine
+	win32_libid_type.
+	(func_mode_link) [ mingw ]: Ignore `-lm'.
+
+2005-09-25  Peter Ekberg  <peda@lysator.liu.se>
+
+	* libltdl/libltdl/lt__private.h, libltdl/lt_error.c:
+	Don't export the lt__last_error and lt__error_strings
+	variables. Define lt__error_strings so that no relocations
+	are needed.
+	* libltdl/libltdl/lt__private.h (LT__STRERROR, LT__GETERROR)
+	(LT__SETERRORSTR): Adjust to not use the above variables,
+	instead use the following functions...
+	* libltdl/lt_error.c: (lt__error_string, lt__get_last_error)
+	(lt__set_last_error): Reimplement the functionality in
+	these functions instead.
+	* libltdl/libltdl/lt_error.h: Add LT_ERROR_LEN_MAX define for
+	max error string length.
+	(lt_dlerror_table): Append explicit nul terminators so that
+	compilers warn more reliably if the above define is too small.
+
+2005-09-23  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/link-order.at [ aix* ]: skip path syntax grep.
+
+2005-09-23  Peter Ekberg  <peda@lysator.liu.se>
+
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Fix awk
+	script to be a single line so that the cache variable isn't
+	multiline.
+
+2005-09-23  Eric Blake  <ebb9@byu.net>  (tiny change)
+
+	* libltdl/loaders/loadlibrary.c (vm_open): Silence gcc warnings.
+	[__CYGWIN__]: Include <sys/cygwin.h> for prototype.
+
+2005-09-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* bootstrap: Don't clobber the working copy metadata in
+	./{arch}/libtool during bootstrap.
+
+2005-09-22  Peter Ekberg  <peda@lysator.liu.se>,
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Filter
+	user supplied symfile to tag relevant symbols as data
+	symbols. Fixes segfault in stresstest.at on Cygwin and
+	makes the test pass.
+
+2005-09-22  Peter Ekberg  <peda@lysator.liu.se>
+
+	* tests/link-order.test: Clean up the uninstalled libraries
+	before linking the test executables so that they don't pick
+	up the dlls from the current dir on Cygwin and MinGW.
+
+2005-09-22  Tim Rice  <tim@multitalents.net>
+
+	* libltdl/m4/libtool.m4 (LT_PATH_NM, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG, _LT_SYS_HIDDEN_LIBDEPS):
+	Add missing `;;' after case list.
+
+2005-09-22  Peter Ekberg  <peda@lysator.liu.se>,
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS, _LT_COMPILER_PIC)
+	(_LT_LINKER_SHLIBS): Require _LT_TAG_COMPILER to make sure that
+	$compiler is assigned. Fixes crippled configure output.
+
+2005-09-21  Peter Ekberg  <peda@lysator.liu.se>
+
+	* libltdl/m4/libtool.m4 (LT_PATH_NM): Fix autodetection of
+	dumpbin and also check for "link -dump -symbols" as a synonym
+	for "dumpbin -symbols".
+
+	* libltdl/config/ltmain.m4sh (func_mode_uninstall): Clean
+	up $dlname as well when cleaning a uninstalled libtool
+	library. Fixes -mode=clean on Cygwin and MinGW to actually
+	remove the dll when cleaning up an uninstalled library.
+
+2005-09-20  Peter Ekberg  <peda@lysator.liu.se>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG):
+	Split up --out-implib option for linker in separate args so that
+	the MSYS path translation can do its magic on the provided path
+	to the import library. Fixes problem in stresstest.at on MinGW.
+
+2005-09-19  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (ltdldatafiles): Fix installation order to match
+	dependency order.
+	(libltdl/Makefile.in): Use $(srcdir) for non-GNU make.
+
+2005-09-17  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Allow some
+	ARM gcc ABI flags through.
+	Reported by Andrés Moré <more.andres@gmail.com>.
+
+	* Makefile.am (all-local): Rebuild libltdl/Makefile.in.
+
+	* libltdl/m4/ltdl.m4 (LTDL_INIT) <CONFIG_H>: Rename to..
+	<LT_CONFIG_H>: this, to contain the name of the config
+	header.
+	* Makefile.am <DEFS>: Use it to define LT_CONFIG_H.
+	* HACKING, libltdl/argz.c, libltdl/lt__alloc.c,
+	libltdl/libltdl/lt__dirent.h, libltdl/libltdl/lt__glibc.h,
+	libltdl/libltdl/lt__private.h, libltdl/libltdl/lt__strl.h:
+	Adjusted.
+
+2005-09-16  Peter Ekberg  <peda@lysator.liu.se>
+
+	* tests/testsuite.at (LT_AT_EXEC_CHECK): Make sure
+	that the exit status of the tested program is
+	propagated as the exit status of the expression
+	fed to AT_CHECK.
+
+2005-09-14  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/argz.c <HAVE_CONFIG_H>: Avoid redefinition warning.
+
+	* libltdl/ltdl.c (lt_argz_insert): Work around newlib
+	argz_insert bug.
+	* Makefile.am (VERSION_INFO): Bumped revision.
+	Reported by Eric Blake <ebb9@byu.net>.
+
+2005-09-13  Peter Ekberg  <peda@lysator.liu.se>,
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms):
+	Fix escape expression to actually escape relevant
+	characters from the following grep. Fix Cygwin and
+	MinGW to use the filtered symbol list when exporting
+	from self, and not the symbol filter.
+	* tests/stresstest.at: Export w8, not w8$
+
+2005-09-12  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	Make tagdemo work smoothly with both pre- and ISO C++ compilers,
+	and remove all use of libstdc from other tests.
+
+	* tests/tagdemo/configure.ac (HAVE_NAMESPACES, HAVE_IOSTREAM):
+	New tests for ISO C++ features.  Reimplementation of similar
+	macros from the autoconf archive.
+	* tests/tagdemo/foo.cpp, tests/tagdemo/main.cpp: Adjusted.
+	* tests/am-subdir.at, tests/template.at: Do not use iostream.
+
+2005-09-12  Peter Ekberg  <peda@axentia.se>,
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/testsuite.at (host_os): Pull from `libtool --config'.
+	* tests/stresstest.at [ cygwin, mingw, pw32 ]: Use it to fix
+	setting of `-no-undefined'.
+
+2005-09-12  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltdl.m4 (LT_WITH_LTDL, LTDL_CONVENIENCE)
+	(LTDL_INSTALLABLE): Use less quoting for expanded LIBLTDL,
+	LTDLINCL.  Use m4_default instead of m4_if, to work
+	around AU_ALIAS bug with empty macro arguments.
+	(LTDL_INIT): Likewise.
+	* libltdl/m4/ltoptions.m4 (_LT_WITH_PIC): Likewise.
+	* TODO, HACKING: Updated.
+
+2005-09-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (TAR): Allow the user to override the tar
+	command.
+
+2005-09-09  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_BOILERPLATE)
+	(_LT_LINKER_BOILERPLATE, _LT_COMPILER_OPTION, _LT_LINKER_OPTION)
+	(_LT_COMPILER_C_O): When comparing expected and actual compiler/
+	linker output for warnings, weed out both empty lines as well as
+	lines starting with possibly indented `+', to allow for shell
+	debugging with `set -x'.
+	Check the weeded instead of unweeded contents for emptiness.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Actually provide
+	a useful error message.  Fixes long-standing shameful user
+	neglection.
+	Reported by Martin Paljak <martin.paljak@gmail.com>.
+
+2005-09-08  Peter Ekberg  <peda@axentia.se>
+
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS) [dumpbin]:
+	Symbols in "pick any" sections are not global. Use
+	awk, not sed, in the global_symbol_pipe so that keeping
+	track of sections is easier.
+	* doc/libtool.texi (libtool script contents): Update to hint
+	at new findings concerning "pick any" sections.
+
+2005-09-08  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/early-libtool.at (config.status): Use EXEEXT
+	consistently.
+	Reported by Charles Wilson <cygwin@cwilson.fastmail.fm>.
+
+2005-09-08  Charles Wilson  <cygwin@cwilson.fastmail.fm>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[ cygwin, mingw, pw32 ]: Use --enable-auto-image-base instead of
+	a fixed image base address.
+
+2005-09-06  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD) [ sysv4*uw2*,
+	sysv4.2uw2* ]: Fix my last checkin to really match the more special
+	case before the general case.
+	Reported by Stepan Kasal <kasal@ucw.cz>.
+
+2005-09-06  Roger Cornelius  <rac@tenzing.org>
+
+	* libltdl/m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD)
+	[ sysv5OpenUNIX8, sysv5UnixWare7, sysv5uw[78], unixware7,
+	sysv4*uw2* ]: Match special cases before general case.
+
+2005-09-05  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* bootstrap: another AIX sed fix.
+
+	* Makefile.am (TESTS_ENVIRONMENT): Export SHELL.
+	* bootstrap (SHELL): Set to $CONFIG_SHELL or /bin/sh.
+	Name `make' targets in portable fashion.  Work around `rm'
+	warnings.  Unconditionally create fake `libtoolize'.
+	Reported by Patrick Welche <prlw1@newn.cam.ac.uk>.
+
+	* Makefile.am (doc/notes.txt): Use --no-headers instead of
+	--plaintext for makeinfo.
+	Reported by Peter O'Gorman <peter@pogma.com>.
+
+2005-09-04  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [ aix ]
+	<export_symbols_cmds>: Work around shell expansion issue in
+	func_show_eval by separating `$' and field number; drop then
+	unnecessary m4 quoting.
+
+2005-09-02  Gary V. Vaughan  <gary@gnu.org>
+
+	AC_BEFORE only works if declarations are made inside the macro
+	cited as the first argument:
+
+	* libltdl/m4/libtool.m4 (LT_OUTPUT): Move AC_BEFORE decls...
+	(LT_INIT, LT_LANG): ...to the macro that has to come first.
+
+2005-09-01  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 (old_postintall_cmds): chmod 644 before
+	running ranlib.
+	Reported by Gerald Pfeifer <gerald@pfeifer.com>
+
+2005-09-01  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_PROG_CXX, _LT_PROG_F77)
+	(_LT_PROG_FC): aclocal-1.4 compatibility workaround.
+
+	* bootstrap: Do not use nonportable -path.
+	Reported by Ralf Menzel <menzel@ls6.cs.uni-dortmund.de>.
+
+2005-09-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (LT_INIT): Fix a logical error with
+	documentation of --with-pic vs --without-pic.
+
+2005-09-01  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltoptions.m4 (_LT_SET_OPTIONS): m4_defun this..
+	* libltdl/m4/libtool.m4 (LT_INIT): so it can be m4_require'd
+	from here with user-supplied options.  Fixes output macro
+	ordering issue.
+
+2005-09-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_scan_files): When searching for evidence
+	of Autotools in aclocal.m4, be careful not to trip over requires
+	and defuns.
+
+2005-08-31  Gary V. Vaughan <gary@gnu.org>,
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltoptions.m4 (_LT_SET_OPTIONS): Move option macro
+	dipatch..
+	(_LT_SET_OPTION): here.  Do not fail but warn on unknown
+	options.
+	(_LT_UNLESS_OPTIONS(win32-dll), LT_OPTION_DEFINE(dlopen)):
+	Add whitespace.
+	Reported by Robert Ögren <lists@roboros.com> and
+	Akim Demaille <akim@lrde.epita.fr>.
+
+2005-08-31  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 [ solaris CC ]: Document issue with C++
+	standard libraries.
+
+2005-08-30  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/ltoptions.m4 (AC_LIBTOOL_PIC_MODE): Renamed...
+	(AC_LIBTOOL_PICMODE): ...this in the backwards compatibility
+	code.  There never was an AC_LIBTOOL_PIC_MODE macro.
+
+	* libltdl/m4/libtool.m4 (_LT_SETUP): Remove duplicate
+	--enable-libtool-lock declaration.
+
+2005-08-29  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_PATH_TOOL_PREFIX, _LT_SYS_HIDDEN_LIBDEPS, _LT_DECL_EGREP):
+	Fix typos.
+
+	* Makefile.am: Install libltdl data files in correct order.
+	Use pre-defined programs for installation; use NORMAL_INSTALL
+	and NORMAL_UNINSTALL.  Really fix ownership and timestamp
+	problems.  Fix typo in uninstallation of aclocal files.
+	Reported by Peter Breitenlohner <peb@mppmu.mpg.de> and
+	Charles Wilson <cygwin@cwilson.fastmail.fm>.
+
+2005-08-29  Gary V. Vaughan <gary@gnu.org>,
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	Allow for portability with Autoconf 2.59, Automake 1.9.6,
+	which lack AC_CONFIG_LIBOBJ_DIR support.
+
+	* bootstrap: Unless environment variable WORKING_LIBOBJS_SUPPORT
+	is set to true aka `:', symlink ..
+	* argz.c lt__dirent.c lt__strl.c: .. these from the copies in
+	libltdl.
+	* configure.ac (SUBDIR_LIBOBJS): Automake conditional, set if
+	bootstrap didn't make the extra copies of libobj sources in
+	top srcdir...
+	* Makefile.am: Add these to EXTRA_DIST if SUBDIR_OBJS is not set,
+	as well as the originals in libltdl/, in order to work when
+	bootstrapped both with old and newer Automake/Autoconf.
+
+2005-08-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/ltdl.m4 (LTDL_CONVENIENCE): Fix the comment to not
+	pretend that LIBLTDL and LTDLINCL are not AC_SUBSTed here.
+
+2005-08-29  Gary V. Vaughan  <gary@gnu.org>
+
+	Some macros had relied on accidentally correct ordering in order
+	for $MV to be defined before use.  Factor out setting of some
+	common file commands and m4_require it before use:
+
+	* libltdl/m4/libtool.m4 (_LT_FILEUTILS_DEFAULTS): Allow user to
+	override some common file commands at configure time.
+	(_LT_SETUP, _LT_CONFIG, _LT_COMPILER_OPTION, _LT_LINKER_OPTION)
+	(_LT_COMPILER_C_O, _LT_COMPILER_FILE_LOCKS)
+	(_LT_SYS_DYNAMIC_LINKER, _LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	(_LT_SYS_HIDDEN_DEPLIBS): m4_require it to ensure the commands are
+	defined before they are called.
+
+2005-08-28  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/libtool.m4, libltdl/m4/ltdl.m4: AU_DEFUN doesn't pass
+	arguments.  Use AU_ALIAS instead!
+
+2005-08-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>,
+	    Gary V. Vaughan <gary@gnu.org>
+
+	* libltdl/config/ltmain.m4sh (func_lalib_unsafe_p) [osf]:
+	Save file descriptor to original STDIN, and restore after
+	redirection.  Fixes memory corruption with Tru64 and OSF sh.
+	Reported by Nicolas Joly <njoly@pasteur.fr>.
+
+2005-08-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>,
+	    Peter Ekberg  <peda@lysator.liu.se>
+
+	* tests/early-libtool.at: Fix goofed up make rules in
+	previous commit.
+
+	* tests/inherited_flags.at: Weaken for MSVC.
+	* tests/early-libtool.at, tests/template.at: Fix for compiler
+	that do not understand '-c -o'.
+
+2005-08-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/standalone.at, tests/template.at: Do not compare
+	output because of EOL issues.  Resolve warnings, make cross-
+	compilation aware.
+	Reported by Peter Ekberg <peda@axentia.se>.
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_LINKER_SHLIBS): Double-quote unsafe tag variable
+	descriptions: they are literals.
+
+2005-08-25  Peter Ekberg  <peda@lysator.liu.se>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/standalone.at: (without autotools): Add
+	$(CFLAGS) to LTCOMPILE and LTLINK. Separate compiling
+	and linking. Remove compiling flags from link. Add
+	--tag. Add -no-undefined flag.
+
+2005-08-24  Bruno Haible  <bruno@clisp.org>
+
+	* libltdl/config/ltmain.sh (func_mode_install): Try "ln -s -f"
+	and "rm -f && ln -s" to make a symlink for a shared library: the
+	former is needed for libraries `ln' depends on, the latter for
+	Solaris /bin/ln.
+	Reported by Nelson H. F. Beebe <beebe@math.utah.edu>.
+
+	* libltdl/config/ltmain.sh (cwrappersource): return 127 if exec
+	failed.
+
+2005-08-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_C_O): Send chmod warning to log.
+
+	* tests/defs.m4sh (m4dir, auxdir, scripts): Fix for source tree
+	reorganization.
+	* tests/sh.test: Adjust.  Also barf on sed diagnostics so this
+	test will not fail again silently.
+
+	* libltdl/m4/ltdl.m4 (LT_SYS_SYMBOL_USCORE): Use _LT_EOF, not
+	EOF.
+
+	* tests/fcdemo/Makefile.am (suffix rules): Explicitly add
+	$(FCFLAGS_f90) so the tests can pass on AIX.
+
+2005-08-24  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/config/ltmain.m4sh (inherited_linker_flags): Work when
+	output is an application too.
+	Reported by Christopher Egger <Christoph_Egger@gmx.de>
+
+2005-08-23  Stepan Kasal  <kasal@ucw.cz>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltdl.m4 (LTDL_INIT): Use AH_HEADER if defined.
+	Compute CONFIG_H only before creating config.status.
+	Reported by Peter Ekberg <peda@axentia.se>.
+
+2005-08-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.maint (web-manual): Fix $(LN_S) to use absolute path.
+	Fix creating the manual for VPATH build.
+
+	* bootstrap: Fix missing replace config -> $auxdir.  ltmain.m4sh
+	is prerequisite to ltmain.sh.  Improve warning message.
+
+2005-08-22  Gary V. Vaughan  <gary@gnu.org>
+
+	Reorganise the libtool tree to create a bootstrapped libltdl for
+	installation to the libtoolize master tree, so that libltdl is
+	useable even in the extreme case of when automake and autoconf are
+	not installed on the developers machine.  Part of this change
+	requires some duplication of rules between Makefile.am (which
+	builds libltdl for this distribution) and libltdl/Makefile.am
+	(which is used by projects that libltoolize --ltdl --copy), so
+	libtool now really does use a single toplevel Makefile.am, and we
+	generate libltdl/Makefile.am from that:
+
+	* m4, config: Moved from here...
+	* libltdl/m4, libltdl/config: ...to here, to reduce the amount of
+	kludging needed in bootstrap for autoreconf to run.
+	* tests/cdemo/Makefile.am, tests/demo/Makefile.am,
+	tests/depdemo/Makefile.am, tests/f77demo/Makefile.am,
+	tests/fcdemo/Makefile.am, tests/mdemo/Makefile.am,
+	tests/mdemo2/Makefile.am, tests/pdemo/Makefile.am,
+	tests/tagdemo/Makefile.am (ACLOCAL_AMFLAGS): Adjust to
+	compensate.
+	* tests/cdemo/configure.ac, tests/demo/configure.ac,
+	tests/depdemo/configure.ac, tests/f77demo/configure.ac,
+	tests/fcdemo/configure.ac, tests/mdemo/configure.ac,
+	tests/mdemo2/configure.ac, tests/pdemo/configure.ac,
+	tests/tagdemo/configure.ac (AC_CONFIG_AUX_DIR): Ditto.
+	* libltdl/m4/ltdl.m4: Increment serial number.
+	(LTDL_INIT): Accept an optional directory argument to prefix each
+	of the LD_DLLOADERS locations.  Default to empty for backwards
+	compatibility.
+	* Makefile.maint: Adjust to compensate.
+	* configure.ac (AC_CONFIG_AUX_DIR, AC_CONFIG_MACRO_DIR): Adjust.
+	(AC_CONFIG_LIBOBJ_DIR): Set here so that we can build LTLIBOBJS
+	from in a subdirectory from the amalgamated Makefile.am.
+	(AM_PROG_CC_C_O, AM_INIT_AUTOMAKE): Use subdir-objects.
+	(AC_CONFIG_FILES): Remove libltdl/Makefile.am.
+	* libltdl/Makefile.am: Removed from repository, and merged into
+	Makefile.am as we now generate it...
+	* Makefile.am (libltdl/Makefile.am): ...from here, by extracting
+	the merged rules, and tweaking paths to accomodate the difference
+	in directory from Makefile.am to libltdl/Makefile.am.
+	(nobase_dist_pkgdata_DATA): Automake generated installation rules
+	change timestamps of installed files, so renamed this...
+	(configauxfiles): ...to this...
+	(libtoolize): ...substitute it...
+	(install-data-local): ...install manually, preserving
+	timestamps...
+	(install-data-hook): ...and set execute bit as appropriate.
+	(uninstall-hook): Not forgetting to remove them at uninstall.
+	(libltdl/Makefile.in): New rule.  Called from...
+	* bootstrap: ...here to avoid relying on config.status at
+	bootstrap time.
+	(auxdir, m4dir): Extract from configure.ac for ease of future
+	maintenance.  Adjust all references.
+	(reconfdirs): Call autoreconf for libltdl too -- even
+	though we don't use it for the build, libltdl/configure and
+	friends are installed with `libtoolize --ltdl --copy'.
+	* libtoolize.m4sh: Add files from the installed config master tree
+	to libtoolize --ltdl project subdirectory.
+	Diagnose duplicated files when --ltdl is used in an autotooled
+	project.
+	It's perfectly fine to run `libtoolize --ltdl --copy' in a tree
+	that has no configure.ac or configure.in; we want libltdl to be
+	useful even to projects that don't use autotools themselves.
+	(libtoolize_flags): Removed.  Changed all callers.
+	(func_massage_pkgconfig_files): New function.
+	* tests/standalone.at: New tests for using libltdl without
+	supporting configury in the parent project.
+	* tests/testsuite.at: Run them!
+	* NEWS: Updated.
+
+2005-08-22  Peter Ekberg  <peda@lysator.liu.se>
+
+	* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS) [dumpbin]: Add
+	forgotten end bracket.
+
+	* doc/libtool.texi: Shorten the lines describing the
+	output from MS dumpbin, and align the columns.
+
+	* m4/libtool.m4: Bump serial number.
+	(LT_PATH_NM): If nm is not found on the path, look for
+	dumpbin. Then check if $NM responds as dumpbin would
+	and if not, assume the name lister is BSD nm compatible.
+	(_LT_CMD_GLOBAL_SYMBOLS): If the name lister uses the
+	dumpbin interface, adjust the test to find a working
+	global_symbol_pipe.
+	* doc/libtool.texi: Document $NM to possibly be MS
+	dumpbin compatible, and also document the format of the
+	relevant output from MS dumpbin.
+
+2005-08-21  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/Makefile.am: revert mistaken commit.
+
+	* tests/template.at [darwin]: Some of these tests result in
+	unresolved symbols on darwin, so don't run those test on that
+	host!
+
+2005-08-18  Gary V. Vaughan  <gary@gnu.org>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (LT_OUTPUT): New macro to generate
+	libtool before config.status.
+	(_LT_CONFIG_COMMANDS): If LT_OUTPUT has been invoked, then
+	generate code in config.status to call config.lt instead of
+	generating libtool directly.
+	* doc/libtool.texi (LT_INIT): Document LT_OUTPUT.
+	* tests/early-libtool.at: New test.
+	* Makefile.am (TESTSUITE_AT): Updated.
+	* tests/testsuite.at: Updated.  Define defaults for $ACLOCAL,
+	$AUTOCONF.
+
+2005-08-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* TODO: Actually updated now.
+
+	* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [ freebsd ]: Do not
+	assume `aout' for modern FreeBSD by absence of deprecated
+	`objformat'.
+
+	* m4/libtool.m4 [sun, CC] (_LT_LANG_CXX_CONFIG): Move postdeps
+	override ..
+	(_LT_SYS_HIDDEN_LIBDEPS): ..here.
+	* TODO: Updated.
+
+2005-08-18  Stepan Kasal  <kasal@ucw.cz>
+
+	* config/general.m4sh (SP2NL, NL2SP): Simplify.
+
+2005-08-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* m4/ltdl.m4 (LTDL_INIT): Fix mismatched parens.
+
+2005-08-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/inherited_flags.at: Store intermediate libtool output
+	for better debugging.
+
+	* tests/link-order.at: Add -no-undefined to LDFLAGS.
+
+	* tests/convenience.at, tests/template.at: Change suffix of C++
+	files to .cpp, for compatibility with MSVC.
+	Reported by Peter Ekberg <peda@axentia.se>.
+
+2005-08-12  Jeremie LE HEN  <tataz@sitadelle.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Creating object files, Linking libraries):
+	Update description of library object (.lo) and libtoo library
+	(.la) files.
+	(all over): Replace MODE with --mode=MODE in examples.
+
+2005-08-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_source): New function.
+	(func_mode_execute, func_mode_install, func_mode_link): Use it.
+	Do not append a dot to a file name to source, it breaks on
+	cygwin managed mounts and is not necessary anywhere.
+	Reported by Eric Blake <ebb9@byu.net>.
+
+	* config/ltmain.m4sh (func_execute_cmds): New function.
+	(func_mode_finish, func_mode_install, func_mode_link)
+	(func_mode_uninstall): Use it.
+
+	* tests/defs.m4sh (func_configure): Rename to ..
+	(func_configure_nofail): this, call from old.
+	* tests/fcdemo-conf.test, tests/fcdemo-shared.test,
+	tests/fcdemo-static.test: Use.  Do not fail gratuitously but
+	SKIP on compilers that look like they could be Fortran 77-only.
+	Reported by Patrick Welche <prlw1@newn.cam.ac.uk>.
+
+	* config/ltmain.m4sh (mode): Do not initialize, for nicer error
+	messages.
+
+2005-08-10  Peter Ekberg  <peda@lysator.liu.se>
+
+	* m4/libtool.m4 (_LT_LANG_CXX_CONFIG): Set ac_ext to cpp, not cc.
+
+2005-08-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (inherited_linker_flags): Backed out broken
+	patch.
+
+2005-08-08  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh (inherited_linker_flags): Work when output
+	is an application too.
+	Reported by Christopher Egger <Christoph_Egger@gmx.de>
+
+2005-08-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_PROG_FC, _LT_LANG_FC_CONFIG): New macros
+	for modern Fortran.
+	(LT_LANG, _LT_LANG_DEFAULT_CONFIG, _LT_SYS_DYNAMIC_LINKER,
+	_LT_SYS_HIDDEN_LIBDEPS): Adjusted.
+	* tests/fcdemo-conf.test, tests/fcdemo-exec.test,
+	tests/fcdemo-make.test, tests/fcdemo-shared.test,
+	tests/fcdemo-static.test, tests/fcdemo/Makefile.am,
+	tests/fcdemo/README, tests/fcdemo/configure.ac,
+	tests/fcdemo/cprogram.c, tests/fcdemo/foo.h, tests/fcdemo/fooc.c,
+	tests/fcdemo/foof.f90, tests/fcdemo/foof2.f90,
+	tests/fcdemo/foof3.f90, tests/fcdemo/fprogram.f90: New tests for
+	Fortran.
+	* tests/convenience.at: Extended.
+	* Makefile.am, configure.ac: Adjusted.
+	* NEWS: Updated.
+
+	* AUTHORS, HACKING: Updated.
+
+2005-08-05  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* config/ltmain.m4sh (func_mode_link): Ignore errors from expr
+	when determining if piece-wise linking should be done.
+
+2005-08-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_link) <cwrappersource>: Add
+	missing bit from Christoph's patch.
+
+	* m4/libtool.m4 (_LT_LINKER_HARDCODE_LIBPATH, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG): Comment typos.
+
+2005-08-04  Christoph Egger  <Christoph_Egger@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_link) <cwrappersource>: Change
+	basename() to base_name() and have it return a pointer to const,
+	fix compilation warnings.
+
+2005-07-30  Peter Ekberg  <peda@lysator.liu.se>
+
+	* m4/libtool.m4 (_LT_PROG_F77): Set it up so that saying F77=no
+	to configure disables the fortran tests in the testsuite.
+
+2005-07-29  Richard Moseley  <dickie.moseley@virgin.net>
+
+	* m4/ltdl.m4 (LTDL_INIT): Handle in addition the new name for
+	AC_LIST_HEADERS which is _AC_LIST_TAGS.
+
+2005-07-28  Peter Ekberg  <peda@lysator.liu.se>
+
+	* libltdl/Makefile.am: Make the LTDLOPEN define controllable
+	from the configure script.
+	* m4/ltdl.m4 (LTDL_INIT): Set the LTDLOPEN define according
+	to libname_spec.
+
+	* tests/mdemo-dryrun.test: ls -l in MSYS sometimes shows year,
+	not time, for really fresh files. Add sleep 1 calls at
+	strategic places. Makes the test pass for MinGW.
+
+	* m4/libtool.m4 (_LT_LINKER_OPTION): Fix copy-paste bug, it is
+	the linker that is tested.
+
+	* tests/demo-noinst-link.test: $make is empty on MSYS, replace
+	with $MAKE. Makes the test pass for MinGW.
+
+	* config/ltmain.m4sh (func_generate_dlsyms): Properly remove
+	the fake symbol line ": @PROGRAM@ " from the list of exported
+	symbols.
+
+	* libltdl/loaders/loadlibrary.c (vm_open): Set the error mode so
+	that no dialog is popped up in case the file given to
+	LoadLibrary is not a dll.
+
+	* config/ltmain.m4sh (func_mode_link) <lib>: Make sure
+	skipped_export is set to colon if _some_ cmd of
+	export_symbols_cmds is too long.
+
+	* libltdl/ltdl.c: The linker is confused by having one
+	definition of lt_libltdlc_LTX_preloaded_symbols tagged with
+	__declspec(dllexport) in ltdl.c and one definition with an
+	initial value in libltdlcS.c. So, just say extern in ltdl.c.
+	Fixes the mdemo-exec.test for MinGW.
+
+	* config/ltmain.m4sh (func_mode_link) <lib>: Zap duplicate
+	message "creating reloadable object files..."
+
+2005-07-23 Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (CXX, archive_cmds) [sun]: Add -lCstd, -lCrun
+	and -lc for c++ builds with Sun C++ and Centerline C++..
+	Reported by Albert Chin-A-Young <china@hewrittenword.com>
+
+2005-07-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_CHECK_XSI_SHELL): Fix bogus merge.
+	Reported by Patrick Welche <prlw1@newn.cam.ac.uk>.
+
+2005-07-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/Makefile.am (libltdl_la_DEPENDENCIES): Depend on
+	$(BUILT_SOURCES) as well, so that argz.h gets created through
+	`make libltdlc.la'.
+	Reported by Sven Verdoolaege <skimo@liacs.nl>.
+
+2005-07-08  Peter Breitenlohner  <peb@mppmu.mpg.de>
+
+	* Makefile.am (install-data-local): Have root own of installed
+	files (but do not fail, for user installs).
+
+2005-07-08  Bruno Haible  <bruno@clisp.org>
+
+	* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) <postinstall_cmds>
+	[cygwin,mingw,pw32]: Make DLL executable after installing it.
+
+2005-07-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_install): Do not assume `-f'
+	needs an argument if the install program is `cp'.  Cleanup
+	install mode somewhat.
+	Reported by Juergen Leising <juergen.leising@gmx.de>.
+
+2005-07-03  Thorsten Glaser  <tg@66h.42h.de>
+
+	* m4/libtool.m4 (_LT_TRY_DLOPEN_SELF): Quieten configure
+	output for corner cases on some BSDs.
+	(LT_CMD_MAX_LEN): Another comment cleanup.
+
+	* config/ltmain.m4sh (func_extract_archives, func_mode_install),
+	m4/libtool.m4 (_LT_SETUP, _LT_SYS_DYNAMIC_LINKER, LT_PATH_LD)
+	(_LT_PATH_LD_GNU, _LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG):
+	Comment language, indentation, and backquote cleanup.
+	* THANKS: Updated.
+
+2005-07-02  Peter O'Gorman  <peter@pogma.com>
+
+	* tests/inherited_flags.at: Use -no-undefined.
+	Reported by Chris Oxenreider <oxenreid@state.net>
+
+2005-07-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_compile, func_mode_link),
+	m4/libtool.m4 (_LT_PROG_ECHO_BACKSLASH, _LT_ENABLE_LOCK):
+	Remove some unnecessary quotes.
+
+	* tests/convenience.at <GCJ>: Fix java test.
+	Reported by Eric Blake <ericblake@comcast.net>.
+
+2005-07-01  Derek R. Price  <derek@ximbiot.com>
+
+	* config/ltmain.m4sh (func_mode_link) <shell wrapper>: Handle
+	spaces in paths to executed programs.  Quote path in error message.
+
+2005-06-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* THANKS: Updated.
+
+2005-06-28  Stepan Kasal  <kasal@ucw.cz>
+
+	* clcommit.m4sh: "grep|sed" can be replaced by mere "sed".
+	* m4/libtool.m4 (_LT_LIBTOOL_TAGS): Remove unnnecessary "[]".
+	* m4/lt~obsolete.m4: Use m4_ifndef.
+
+2005-06-27  Stepan Kasal  <kasal@ucw.cz>
+
+	* m4/ltsugar.m4 (lt_combine, _lt_combine): Fix default separator.
+
+	* m4/ltoptions.m4 (_LT_UNLESS_OPTIONS, _LT_SET_OPTIONS): Replace
+	AC_FOREACH by a combination of m4_foreach/m4_split/m4_normalize.
+
+2005-06-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/ltoptions.m4 (_LT_SET_OPTIONS): Remove unnecessary workaround
+	for CVS Automake bug (fixed).
+	Reported by Stepan Kasal <kasal@ucw.cz>.
+
+2005-06-21  Peter O'Gorman  <peter@pogma.com>
+
+	* conig/ltmain.m4sh [darwin]: Accept -arch flag.
+
+2005-06-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_COMPILER_BOILERPLATE, _LT_LINKER_BOILERPLATE):
+	New macros: save warnings and boilerplate of simple compile/link
+	tests.
+	(_LT_LANG_C_CONFIG, _LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG)
+	(_LT_LANG_GCJ_CONFIG, _LT_LANG_RC_CONFIG): Call.
+	(_LT_COMPILER_OPTION, _LT_LINKER_OPTION, _LT_COMPILER_C_O, ):
+	Fail only if nonempty warnings different from default
+	compile/link.
+
+2005-06-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/ltsugar.m4 (lt_car, lt_cdr): New macros, clones of
+	m4_car/m4_cdr with the fixed semantics of Autoconf-2.59c CVS, in
+	order to work with 2.59.
+	(lt_combine): Use it.
+	Reported by Christoph Egger <Christoph_Egger@gmx.de>.
+
+2005-06-11  Ralf Menzel  <menzel@ls6.cs.uni-dortmund.de>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/ltoptions.m4 (_LT_SET_OPTIONS): Loop options only if
+	nonempty.
+	* m4/ltsugar.m4 (lt_combine): Don't test against empty quotes,
+	test against empty arg.  Fixes infinite m4 loop with CVS
+	Autoconf.
+
+2005-06-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_COMPILER_OPTION, _LT_LINKER_OPTION): No
+	need for $ECHO here.  Fix sed script syntax to be portable.
+	This should now put the pic-flag right after the last $*FLAGS
+	variable again, if any.  Necessary for Fortran AC_FC_SRCEXT.
+
+2005-06-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_CONFIG_COMMANDS): Remove long lines.
+
+2005-06-06  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS,
+	_LT_LANG_CXX_CONFIG): PGI also has pgf95.  PGI static flag is
+	`-Bstatic'.  Remove harmless extra comma from whole_archive
+	output.
+
+2005-06-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_compile): In order to find out
+	about forbidden characters in output, check with grep after
+	checking func_quote_for_eval result.  Also, warn instead of fail.
+	* config/general.m4sh (func_quote_for_eval)
+	(func_quote_for_expand): Revert SunOS sh bug workaround patch from
+	2004-12-28 as it triggers bugs in the Tru64 5.1B shell.
+	Reported by Albert Chin <libtool@mlists.thewrittenword.com> and
+	Nicolas Joly <njoly@pasteur.fr>.
+
+2005-06-01  Olly Betts <olly@survex.com>  (tiny change)
+
+	* libltdl/argz.c (argz_create_sep): Fix typo.
+
+2005-05-31  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh: Do not add installed static litool libraries
+	to convenience, they are not convenience libraries.
+	Reported by Chen-Mou Cheng <chenmou.cheng@gmail.com>
+
+2005-05-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* THANKS: Updated.
+
+2005-05-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG) [aix]:
+	Fix wrong $ECHO use overlooked in 2005-04-27.  Simplify slightly.
+
+	* m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS,
+	_LT_LANG_CXX_CONFIG) [linux]: PGI:
+	Add $pic_flag to archive_cmds and archive_expsyms_cmds.
+	Bug reported against LAM by Troy Telford <ttelford@lnxi.com>.
+
+2005-05-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* THANKS: Updated.
+
+2005-05-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/ltdl.m4 (LT_WITH_LTDL): Propogate ltdl directory.
+
+2005-05-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (stamp-vcl): Use `diff' instead of `cmp'.
+
+2005-04-30  Gary V. Vaughan  <gary@gnu.org>
+
+	Revert the parallel installation changes from November last year:
+
+	* libtoolize.m4sh (pkgdatadir, aclocaldir): Substituted from
+	configure.
+	(func_copy_all_from_path): Removed.  No longer used.
+	(func_copy_some_files): Simplify now that nothing is copied from a
+	list of possible directories now.
+	(func_scan_files): Remove directory readability check...
+	(func_nonemptydir_p): ...in favour of a dedicated sanity check
+	function called from the main body.
+	(_lt_pkgvdatadir): Set pkgdatadir and aclocaldir appropriately if
+	this is in the environment.
+	* configure.ac: Tests for `ln' removed.
+	(APIVERSION): Removed.
+	* Makefile.am (pkgvdatadir, nobase_dist_pkgvdata_DATA)
+	(nobase_pkgvdata_DATA): Renamed to...
+	(pkgdatadir, nobase_dist_pkgdata_DATA, aclocalfiles): ...these
+	respectively.
+	(edit): Adjust for new variable names.
+	(install-data-local): Don't bother to remove old macro files that
+	will be overwritten by the installation, and perform a manual
+	installation of $(aclocalfiles) to preserve timestamps.
+	(install-exec-hook): Removed.  No need to make versioned links.
+	(uninstall-hook): No need to remove versioned links, but now we
+	need to manually remove the manually installed $(aclocalfiles).
+	* doc/libtool.texi: Remove bogus notes about setting
+	ACLOCAL_AMFLAGS for versioned libtool installations.
+	* NEWS: Remove parallel installation item.
+
+2005-04-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/ltdl.m4 (all over): Quote all arguments to AC_DEFINE and
+	AC_DEFINE_UNQUOTED consistently.  Reported by
+	Michael Koch  <konqueror@gmx.de>, Riccardo Mottola <zuse@libero.it>,
+	and Dalibor Topic <robilad@kaffe.org>.
+
+	* HACKING: Updated.
+
+2005-04-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/convenience.at: Actually add.
+
+	* tests/convenience.at: New.  Test convenience archives.
+	* Makefile.am, tests/testsuite.at: Adjust.
+	* tests/testsuite.at: Reorder tests.  Suspend AT_TESTED.
+	(PREPARE_TESTS): Define EGREP, host, build, LIBTOOL.
+	(LT_AT_BOOTSTRAP): Fail if autoreconf fails.
+	(LT_AT_EXEC_CHECK): New macro for execution of $build binaries.
+	(LT_AT_TAG): New macro to test tag availability or skip test.
+	* tests/am-subdir.at, tests/duplicate_members.at,
+	tests/inherited_flags.at, tests/link-order.at,
+	tests/stresstest.at, tests/template.at: Adjust.  Use LT_AT_TAG,
+	LT_AT_EXEC_CHECK, AT_KEYWORDS. Use compiler/linker flags
+	consistently.
+	* tests/link-order.at: Fix use of AT_DATA, bogus redirection
+	inside AT_CHECK.
+	* tests/stresstest.at: Do not use wildcards/regex in symbol files,
+	they are not portable.  Use -no-undefined on win32.  Fix to ignore
+	compile/link warnings.
+
+	* tests/f77demo/foo.h, tests/f77demo/fooc.c,
+	tests/f77demo/cprogram.c, tests/mdemo2/main.c, tests/pdemo/foo.h:
+	Make declarations available.
+
+	* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [linux]: sed 3.02 does
+	not understand \t in regex.
+	Reported by Tim Van Holder <tim.vanholder@gmail.com>.
+
+	* tests/defs.m4sh (func_configure): Don't run the whole configure
+	script with -x.
+
+	* config/ltmain.m4sh: Audit use of echo vs $ECHO.
+	Reported by Robert Ögren <lists@roboros.com> and others.
+
+	* TODO: Updated.
+
+2005-04-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>,
+	    Gary V. Vaughan  <gary@gnu.org>
+
+	* HACKING, THANKS: Updated.
+
+2005-04-25  David Edelsohn  <dje@watson.ibm.com>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS): _LT_TAGDECL(file_list_spec).
+	* config/ltmain.m4sh (func_mode_link): Change $filelist to
+	$output.
+
+2005-04-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_CC_BASENAME): Ignore `compile'.
+
+2005-04-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS) [solaris]:
+	Update wl for Sun Studio f77/f90/f95.  Fix whole_archive_flag_spec
+	for cc and f77/f90/f95 to prevent reordering in case we link with
+	$CC.
+
+	* m4/libtool.m4: Audit use of echo vs $ECHO.
+	* TODO: Update.
+	Reported by Robert Ögren <lists@roboros.com> and others.
+
+2005-04-23  Gary Kumfert <kumfert@llnl.gov>
+
+	* m4/libtool.m4 (_LT_LANG_F77_CONFIG) [aix4, aix5]:
+	Adjust logic to match the C case: Only disable static if not
+	on ia64 nor runtimelinking.
+
+2005-04-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>  (tiny change)
+
+	* Makefile.am, HACKING: Use lt__cd throughout.
+
+2005-04-22  Gary V. Vaughan  <gary@gnu.org>
+
+	The FSF are moving offices today.  Changed their contact address
+	in all files from `59 Temple Place, Suite 330, MA 02111-1307' to
+	`51 Franklin Street, Fifth Floor, MA 02110-1301'.
+
+2005-04-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libtoolize.m4sh (func_scan_files, func_serial,
+	func_ltmain_update, func_config_update, func_install_update):
+	Placate AIX sed.
+
+2005-04-19  David Edelsohn  <dje@watson.ibm.com>
+
+	* config/ltmain.m4sh (func_mode_link): If command exceeds
+	max_cmd_len and file_list_spec exists, write list of input files
+	to temporary file.
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[aix4,aix5]: Define file_list_spec.
+
+2005-04-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/demo-hardcode.test: Fix typo.
+
+2005-04-17 Alexandre Oliva  <aoliva@redhat.com>,
+	   Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh: Don't add files with the same base name to
+	an archive; rename duplicates instead.
+	(func_extract_an_archive): Remove section to deal with duplicate
+	base names in an archive.
+	* tests/functests.at: remove.
+	* tests/duplicate_members.at: new test.
+	* tests/testsuite.at: Add new test, remove old.
+	* Makefile.am: Add new test, remove old.
+
+2005-04-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/demo-hardcode.test [solaris]:  Use dumpstabs if available,
+	to avoid false failure caused by debug section which contains
+	command line (Solaris cc).
+	Reported by Ralf Menzel <menzel@ls6.cs.uni-dortmund.de>.
+
+2005-04-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>  (tiny change)
+
+	* libtoolize.m4sh (func_copy_cb): Fix syntax typo.
+
+2005-04-15  Maciej W. Rozycki  <macro@linux-mips.org>
+
+	* m4/libtool.m4 (_LT_LANG_GCJ_CONFIG): Add old_archive_cmds
+	definition.
+
+2005-04-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_CC_BASENAME): New macro to figure out
+	$cc_basename.  Skip ccache, distcc, purify, cmdline options,
+	`$host_alias-' prefix.
+	(_LT_SETUP, _LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG)
+	(_LT_LANG_GCJ_CONFIG, _LT_LANG_RC_CONFIG): Use.
+	* NEWS, TODO: Update.
+
+2005-04-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/configure.ac (AC_OUTPUT): loaders/Makefile is no longer
+	used.
+
+	* Makefile.am (lt__cd, CD_TESTDIR): New make macros to work around
+	problems with CDPATH in some shells.
+	(check-local, installcheck-local, clean-local): Use them.
+
+2005-04-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>  (tiny change)
+
+	* bootstrap: Define srcdir for making `commit'.
+
+2005-04-14  Alexandre Oliva  <aoliva@redhat.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (link mode): Add to tmp_libs paths for
+	libtool dep libs in reverse order as well.
+	* Makefile.am, tests/testsuite.at, tests/link-order.at: New test.
+
+2005-04-13  Gary V. Vaughan  <gary@gnu.org>
+
+	Since the bootstrap process requires that several of the rules for
+	files generated in doc and tests already lived in
+	$top_srcdir/Makefile.am, along with proxy rules in sub-Makefiles,
+	this changeset consolidates almost everything into the top
+	Makefile.am, simplifying things considerably:
+
+	* doc/Makefile.am, tests/Makefile.am: Removed.  All rules moved...
+	* Makefile.am: ...to here and adjusted to run from $top_builddir.
+	Some reformatting to group rules and declarations by purpose, and
+	simplify with respect to removing much of the make recursion.
+	Add `doc/PLATFORMS', `doc/fdl.texi' and `doc/notes.texi'.
+	`defs.in' and `defs.m4sh' are in directory `tests'.
+	(uninstall-hook): Don't forget to uninstall libtoolize's libltdl
+	source tree.
+	* bootstrap: Simplified dirty makefile management, and bootstrap
+	file creation in light of having only a single pertinent
+	Makefile.
+	* configure.ac (CONF_SUBDIRS): Add tests/ prefix to each subdir to
+	compensate.
+	(DIST_MAKEFILE_LIST): Adjust.
+	(AC_CONFIG_FILES): Remove doc/Makefile and tests/Makefile.
+	* tests/defs.m4sh (LIBTOOL, scripts): Adjust paths.
+	* tests/cdemo-conf.test, tests/cdemo-exec.test,
+	tests/cdemo-make.test, tests/cdemo-shared.test,
+	tests/cdemo-static.test, tests/cdemo-undef.test,
+	tests/demo-conf.test, tests/demo-deplibs.test,
+	tests/demo-exec.test, tests/demo-hardcode.test,
+	tests/demo-inst.test, tests/demo-make.test,
+	tests/demo-nofast.test, tests/demo-noinst-link.test,
+	tests/demo-nopic.test, tests/demo-pic.test,
+	tests/demo-relink.test, tests/demo-shared.test,
+	tests/demo-static.test, tests/demo-unst.test,
+	tests/depdemo-conf.test, tests/depdemo-exec.test,
+	tests/depdemo-inst.test, tests/depdemo-make.test,
+	tests/depdemo-nofast.test, tests/depdemo-relink.test,
+	tests/depdemo-shared.test, tests/depdemo-static.test,
+	tests/depdemo-unst.test, tests/f77demo-conf.test,
+	tests/f77demo-exec.test, tests/f77demo-make.test,
+	tests/f77demo-shared.test, tests/f77demo-static.test,
+	tests/link-2.test, tests/link.test, tests/mdemo-conf.test,
+	tests/mdemo-dryrun.test, tests/mdemo-exec.test,
+	tests/mdemo-inst.test, tests/mdemo-make.test,
+	tests/mdemo-shared.test, tests/mdemo-static.test,
+	tests/mdemo-unst.test, tests/mdemo2-conf.test,
+	tests/mdemo2-exec.test, tests/mdemo2-make.test, tests/nomode.test,
+	tests/objectlist.test, tests/pdemo-conf.test,
+	tests/pdemo-exec.test, tests/pdemo-inst.test,
+	tests/pdemo-make.test, tests/quote.test, tests/sh.test,
+	tests/suffix.test, tests/tagdemo-conf.test,
+	tests/tagdemo-exec.test, tests/tagdemo-make.test,
+	tests/tagdemo-shared.test, tests/tagdemo-static.test,
+	tests/tagdemo-undef.test, tests/tagtrace.test (func_cd,
+	func_require): Adjust paths.
+
+2005-04-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/general.m4sh, libtool.m4 (_LT_SETUP), tests/defs.m4sh,
+	tests/functests.at: Fix definition of $Xsed.
+
+2005-04-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Improved Portland support: prelinking of C++ templates and
+	whole_archive.
+
+	* m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS) [linux]:
+	Reinstate formatted whole_archive_flag_spec for PGI compilers.
+	* config/ltmain.m4sh (func_mode_link), m4/libtool.m4
+	(_LT_LINKER_SHLIBS): New tag prelink_cmds, to be executed before
+	linking a program.
+	(_LT_LANG_CXX_CONFIG) [linux]: Use for pgCC.
+	(_LT_COMPILER_C_O): conftest might be nonempty, clean up more
+	thoroughly.
+
+	* tests/testsuite.at (LT_AT_BOOTSTRAP): Temporary fix for testing
+	in-tree libtoolize.
+
+	* m4/libtool.m4 (_LT_CONFIG_COMMANDS): Only call sed if
+	necessary while quoting all libtool variables.
+	Reported by Robert Ögren <lists@roboros.com>.
+
+2005-04-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/Makefile.am: Typo.
+
+2005-04-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* notes.texi: Platform-specific configuration notes.
+	* doc/libtool.texi: Include as section.
+	* bootstrap, doc/Makefile.am: build also as notes.txt and
+	distribute.
+
+2005-04-04  Gary V. Vaughan  <gary@gnu.org>
+
+	Under certain circumstances, not all of the macro files were
+	copied into the destination directory.  This changeset fixes
+	that bug:
+
+	* libtoolize.m4sh (func_serial_update):  Renamed local variable
+	`my_update_p' to `my_serial_update_p', and initialise it correctly
+	even when the destination file is not yet there.
+	Reported by Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+2005-04-04  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/libtoolize.at: New tests for basic libtoolize
+	functionality and reporting.
+	* tests/testsuite.at: Call them.
+	* tests/Makefile.am: Distribute them.
+
+	* libtoolize.m4sh (pkgvdatadir): Renamed from this...
+	(_lt_pkgvdatadir): ...to this.
+	* tests/testsuite.at (LT_AT_LIBTOOLIZE): The `-I' option is no
+	longer supported by libtoolize.  Set _lt_pkgvdatadir in the
+	environment of the invocation instead.
+
+2005-04-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/template.at: New Autotest tests for C++ with templates.
+	First test provided by
+	Markus Christen	<markus@igc.phys.chem.ethz.ch>.
+	* tests/Makefile.am, tests/testsuite.at: Use and distribute.
+
+2005-04-04  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_serial_update): Replace missing
+	destination serial calculation line, presumably lost due to a bad
+	merge.
+
+	* libltdl/loaders/Makefile.am: Removed actually.
+
+2005-04-04  Gary V. Vaughan  <gary@gnu.org>
+
+	Getting the value of ltdldatafiles from a submake was not
+	portable, and had problems with GNU make-3.80 at least.  This
+	changeset pulls the installation rules for libtoolize's copy of
+	the libltdl sources out of libltdl/Makefile.am so that
+	ltdldatafiles is defined in the same Makefile that uses it.  Also,
+	this makes a start at cleaning up libltdl/Makefile.am so that it
+	is useful in a package that uses `libtoolize --ltdl':
+
+	* libltdl/loaders/Makefile.am: Removed entirely.
+	* libltdl/Makefile.am (dlopen.la, dld_link.la, dyld.la)
+	(load_add_on.la, loadlibrary.la, shl_load.la): All built from here
+	now that the loaders submake has gone.
+	(show-ltdldatafiles): Removed.  No longer required.
+	(ltdldatadir, ltdldatafiles, install-local): Moved from here...
+	* Makefile.am (ltdldatadir, ltdldatafiles, install-local): ..to
+	here.
+	(libtoolize): Substitute $(ltdldatafiles) directly without calling
+	make to get the value from libltdl/Makefile.
+
+2005-04-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (libtoolize): Substitute $(nobase_pkgvdata_DATA).
+	pkgvmacro_DATA is no longer set in the makefile.
+	* libtoolize.m4sh (func_massage_pkgvmacro_DATA): Use it and, for
+	consistency, renamed from this...
+	(func_massage_nobase_pkgvdata_DATA): ...to this.  Adjust all
+	callers.
+
+2005-04-01  Gary V. Vaughan  <gary@gnu.org>
+
+	Fix problems with serial comparison sed scripts, and factor out
+	common code from similar serial comparison functions:
+
+	* libtoolize.m4sh (func_keyword_update): Common code factored out
+	of func_ltmain_update and func_config_update.
+	(func_ltmain_update, func_config_update): Adjust, and fix sed
+	expressions to not use unportable ? modifier.
+	(func_install_update): New serial number based file updater keyed
+	off 'scriptversion' variable in install-sh.  Adjust all callers.
+
+2005-04-01  Gary V. Vaughan  <gary@gnu.org>
+
+	Most of the hair introduced ostensibly to enable testing of
+	uninstalled libtoolize isn't necessary if we allow overriding of
+	the libtool master copy directory:
+
+	* configure.ac (pkvmacrodir): No need to substitute this.
+	* Makefile.am (edit): No need to substitute pkgvmacrodir.
+	(dist_pkgvdata_DATA): Use nobase_ prefix so that these files are
+	installed to $(pkgvdatadir)/config.
+	(pkgvmacro_DATA): Renamed to...
+	(nobase_pkgvdata_DATA): ...this, so that files are installed to
+	$(pkgvdatadir)/m4.
+	(install-data-hook): Adjust.
+	* libtoolize.m4sh: Remove -I processing.
+	(func_filename_path_search): No longer required without -I.
+	Adjust all callers.
+	(pkgvltdldirs, pkgvmacrodirs): Deleted.
+	(pkgvdatadir): Allow overriding from the environment so that we
+	can write tests for uninstalled libtoolize.
+	(func_serial_update, func_ltmain_update, func_config_update):
+	Rename srcdirs parameter to srcdir, and don't call the path_search
+	function anymore.  Adjust all callers.
+	(--install): Don't blindly copy all config files.
+
+2005-04-01  Mike Stump  <mrs@apple.com>
+
+	* m4/libtool.m4 (LT_CMD_MAX_LEN) [netbsd, freebsd, openbsd
+	darwin, dragonfly]: Use 3/4 of argmax, instead of 1/4.
+
+2005-03-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_LANG_GCJ_CONFIG, _LT_LANG_RC_CONFIG):
+	Set $cc_basename.
+
+	* HACKING: echo vs $ECHO.
+
+2005-03-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>  (tiny change)
+
+	* doc/libtool.texi: Minor formatting cleanups.
+
+2005-03-24  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh: Propogate --debug flag to sub-libtoolizes.
+
+	* libtoolize.m4sh: Fix a typo, s/pkgvltdldirs/pkgvdatadirs/.
+	When using -I to test an uninstalled libtoolize, we need to add
+	the config subdirectory to the search path so that ltmain.sh can
+	be found in the source tree.
+
+	* libtoolize.m4sh (func_copy_some_files): IFS needs to be set to
+	path delimiter for all inner loop iterations.
+	Once a matching file has been copied, no need to keep searching
+	the path for another -- move on to the next file!
+
+	* libtoolize.m4sh: For verbose mode, explain why macro files are
+	not installed without an AC_CONFIG_MACRO_DIR declaration.
+
+2005-03-24  Gary V. Vaughan  <gary@gnu.org>
+
+	As a prerequisite for being able to test an uninstalled libtoolize
+	for copying files correctly from the source tree, we must know
+	exactly which files should be copied by the --ltdl option to avoid
+	accidentally picking up compilation objects and other noise when
+	$builddir == $srcdir:
+
+	* libltdl/loaders/Makefile.am (ltdldatadir, ltdldatafiles)
+	(install-data-local): Removed...
+	* libltdl/Makefile.am (ltdldatafiles): ...and consolidated here.
+	(show-ltdldatafiles): New rule...
+	* Makefile.am (ltdldatafiles, libtoolize): ...used to substitute
+	exactly which files are installed by libtoolize --ltdl.
+	(edit): Move pkgvmacro_DATA substitution expression...
+	(libtoolize): ...to here.
+	* libtoolize.m4sh: Use func_copy_some_files() instead of
+	func_copy_all_from_path() to copy the --ltdl option installed
+	files.
+	(pkgvltdldirs): New path variable to search for	files installed by
+	--ltdl option.
+	(func_massage_pkgvltdl_files): New function to calculate the list
+	of ltdl installation files.
+
+2005-03-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>  (tiny change)
+
+	* m4/libtool.m4, m4/ltdl.m4: Indentation and quoting cleanup.
+
+2005-03-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS) [solaris]: Use ${wlarc}
+	and set to empty when using $LD for linking.  Fixes regression
+	introduced in 2004-11-17.
+	Reported by Ralf Menzel <menzel@ls6.cs.uni-dortmund.de> and
+	Пухаль�кий Юрий �ндреевич <pooh@cryptopro.ru>.
+
+2005-03-21  Gary V. Vaughan  <gary@gnu.org>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_SETUP, _LT_LANG_CXX_CONFIG)
+	(_LT_LANG_F77_CONFIG): For matching compiler names -- Pick only
+	first word, allow leading white space.
+	* tests/sh.test: ..and test for missing `*' at end of patterns.
+
+2005-03-21  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* TODO: Update.
+
+2005-03-20  Peter Ekberg  <peda@lysator.liu.se>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS) [irix5, irix6, nonstopux]:
+	Test if it is possible to use the -exports_file linker option on
+	irix with gcc, as the gcc specs file may include a -hidden_symbol
+	option that is clashing with the -exports_file option.
+	See this gcc bugzilla entry for further details:
+	http://gcc.gnu.org/bugzilla/show_bug.cgi?id=15288
+	* THANKS: Update.
+
+2005-03-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/demo-nopic.test: Enhance status output
+	noted by Tom Burger <tvburger@few.vu.nl>.
+
+2005-03-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh, tests/defs.m4sh: Typos.
+
+2005-03-18  Peter O'Gorman  <peter@pogma.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4: The compiler can be a program name with args, so
+	always check cc_basename against compiler name and a wildcard.
+	Also, drop unnecessary quotes in `case' argument.
+
+2005-03-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am: tests/defs.in depends on config/general.m4sh.
+
+	* config/general.m4sh: unconditionally set IFS, and set it
+	to the one true right sequence: space, tab, newline.
+	* m4/libtool.m4: remove IFS setting and as_* namespace
+	infringement.
+
+	* m4/libtool.m4 (_LT_CONFIG): Reset IFS to fix failure with ash.
+
+	* configure.ac, libltdl/configure.ac: s/##/dnl/ for comments
+	that are meaningless in configure.
+	Reported by Alexandre Duret-Lutz <adl@src.lip6.fr>.
+
+2005-03-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/configure.ac: Update version; require Autoconf >= 2.59.
+
+	* bootstrap: Allow to override tools.
+
+2005-03-15  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_massage_pkgvmacro_DATA): New function
+	to calculate the macro filenames to be copied by libtoolize.
+	* Makefile.am (edit): Substitute pkgvmacro_DATA.
+
+	* bootstrap: Need to generate tests/package.m4 from Makefile.am
+	before generating tests/testsuite from tests/Makefile.am, or
+	else bootstrap of a fresh checkout fails.
+
+2005-03-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_COPYING): Update Copyright year.
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS) [linux]: Remove MAIN_
+	dependency when creating shared libraries with Portland pgf77.
+
+2005-03-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* configure.ac: stamp-vcl is in $top_srcdir, not $top_builddir.
+
+2005-03-12  Per Bothner <per@bothner.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Allow special characters in source file names.  Will break unless
+	`-o target' is also given, which must not contain special
+	characters. En passant, fix source file quoting broken for
+	cygwin/MSVC:
+
+	* config/ltmain.m4sh (func_mode_compile): Use new variable
+	qsrcfile for quoted source file name for compile $command.  Fix
+	missing quotes for _c_o lockfile.
+	* NEWS: Update.
+
+2005-03-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_link): Reword double negation in
+	error message.
+	Reported by Jesper Louis Andersen <jlouis@mongers.org>.
+
+	* bootstrap: really remove bogus files Makefile tests/Makefile.
+
+	* doc/libtool.texi: Replace wicked whiches by thats or other
+	better-sounding constructs.
+
+2005-03-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>  (tiny change)
+
+	* tests/Makefile (clean-local): Ignore testsuite cleanup
+	failures.
+
+2005-03-11  Per Bothner  <per@bothner.com>  (tiny change)
+
+	* tests/Makefile (clean-local): Only run the testsuite cleanup
+	if the testsuite has been generated.
+
+2005-03-10  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/Makefile.am (install-data-local): Don't force v7 tar
+	format with the `o' flag in create mode.
+	Set the umask to 0 when untarring to avoid copied files taking
+	their mode from the installer's umask.
+	* libltdl/loaders/Makefile.am (install-data-local): Ditto.
+	* libtoolize.m4sh (func_copy_cb): Ditto.
+	Ignore errors from failed `cd' in the tar processes, since we
+	may be running in dryrun mode.
+	Reported by Noah Misch <noah@cs.caltech.edu>,
+		    Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+
+2005-03-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/Makefile.am: $(builddir) is not defined, replace by
+	`.'.
+
+2005-03-08  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[irix*, osf*]: Output -update_registry information to
+	${output_objdir} directory, not ${objdir}. ${output_objdir}
+	will work when a project has a single Makefile and performs
+	builds in subdirectories. ${objdir} expects the source in
+	the current directory, breaking single-Makefile builds.
+
+2005-03-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/stresstest.at: Remove multiple variable definition.
+
+	* TODO: Update.
+
+	* THANKS: Update.
+
+2005-03-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_copy_cb): Use tar chof to avoid symlink
+	attacks.
+	* libltdl/Makefile.am, libltdl/loaders/Makefile.am
+	(install-data-local): Ditto.
+
+2005-02-27  Gary V. Vaughan  <gary@gnu.org>
+
+	In branch-2-0 (and in time, others) ltversion.m4 has a dot
+	delimited serial number that didn't used to be processed
+	correctly by libtoolize.  This changeset fixes that, and
+	leverages those changes to check versions of ltmain.sh and
+	config.sub, config.guess before overwriting when --force is
+	not given:
+
+	* libtoolize.m4sh: Don't overwrite pkgaux files with --force
+	unless --install is given too.
+	(func_serial): Fix underquoting in regexp.
+	(func_serial_max): New function to compare serial numbers.
+	(func_serial_update_check): New function factored out of
+	func_serial_update().
+	(func_serial_update): Bail if SRCFILE is missing.
+	Don't display both 'already up to date' and 'use --force to
+	update' messages for the same file.
+	Use func_serial_max to cope with `.' delimited serial numbers.
+	(func_ltmain_update): Use func_serial_update_check and
+	func_serial_max to do version checking with $package_revision.
+	(func_config_update): Ditto with $timestamp.
+
+2005-02-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/Makefile.am (install-data-local):  cd to $(srcdir)
+	before tarring up the files for installation to
+	$(DESTDIR)$(ltdldatadir).  Don't remove the destination directory,
+	since that interacts badly with the multi-Makefile installation.
+	* libltdl/loaders/Makefile.am (install-data-local): Ditto.
+
+2005-02-26  Gary V. Vaughan  <gary@gnu.org>
+
+	I assume that it is okay to have undefined symbols in convenience
+	libraries that will be used as modules -- the pic objects are
+	built normally, and are not expected to resolve all their symbols
+	until they are linked into a library; convenience libraries are
+	then rolled using 'ar' and 'ranlib' (or equivalent) which also do
+	not check whether symbols are resolved.  We now build each of the
+	loaders as a convenience library module under these assumptions,
+	and link libltdl.la with selected modules, at which time all of
+	the symbols *are* resolved:
+
+	* TODO: Remove item addressed by this changeset.
+	* libltdl/Makefile.am (lib_LTLIBRARIES): Remove libdlloader.la.
+	(libdlloader_la_SOURCES): Declaration removed.  Changed all
+	clients.  Source files..
+	(libltdl_la_SOURCES): ...added back in here.
+	(libdlloader_LDFLAGS, libdlloader_la_LIBADD): Removed.
+	(libltdl_la_LIBADD): Remove libdlloader.la; add $(LTLIBOBJS).
+	* libltdl/loaders/Makefile.am: Removed all references to
+	libdlloader.la.
+
+2005-02-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_copy): Split arguments to func_copy_cb
+	calls across lines so that quote.test doesn't misdiagnose nested
+	quotes.
+
+	* m4/libtool.m4 (_LT_LANG_CXX_CONFIG, _LT_COMPILER_PIC):
+	Fix some typos -- s/_LT_AC_TAGVAR/_LT_TAGVAR/g.
+
+2005-02-24  Peter O'Gorman  <peter@pogma.com>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS): The Portland group's
+	compiler does not pass --whole-archive. Move gnu ld check for
+	the flag to the top so it can be overridden.
+	(_LT_LANG_CXX_CONFIG, _LT_COMPILER_PIC): Unset
+	whole_archive_flag_spec for the portland group's c++ compiler
+	too.
+	Reported by Jeff Squyres <jsquyres@lam-mpi.org>
+
+2005-02-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/Makefile.am (install-data-local): Don't forget about
+	$(DESTDIR).
+	* libltdl/loaders/Makefile.am (install-data-local): Ditto.
+
+2005-02-23  Gary V. Vaughan  <gary@gnu.org>
+
+	Preserving the installed timestamps for libltdl sources from
+	`libtoolize --ltdl --copy' is pointless if they are not preserved
+	from the libtool source tree at install time:
+
+	* libltdl/Makefile.am, libltdl/loaders/Makefile.am
+	(nobase_ltdldata_DATA): Renamed to...
+	(ltdldatafiles): ...this.
+	(install-data-local): New rule to install libltdl tree with tar to
+	preserve timestamps.
+
+2005-02-23  Christoph Egger  <Christoph_Egger@gmx.de> (tiny change)
+
+	* config/ltmain.m4sh (func_mode_link): Add -pthread like flags to
+	inherited_linker_flags.
+
+2005-02-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_copy_cb): self.leg->shoot_off() :-/
+	Let's not redirect stdout to null when sending tar output to a
+	pipe.
+
+2005-02-22  Gary V. Vaughan  <gary@gnu.org>
+
+	Using `libtoolize --copy --ltdl' was not preserving timestamps, so
+	parts of the autoconf bootstrap would be rerun spuriously after
+	the files had been copied into the source tree:
+
+	* libtoolize.m4sh (TAR): New default tar command.
+	(func_copy_cb): Move the core copying internals to here, using
+	$TAR to transfer files if possible when --copy was specified.
+	(func_copy): Adjust to call func_copy_cb.
+	* TODO: Remember to refactor this fix in due course.
+	Reported by Jeff Squyres <jsquyres@lam-mpi.org>
+
+2005-02-21  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh (func_extract_archives) [darwin]: This didn't
+	actually work on a real fat archive, should do now.
+	* tests/functests.at [darwin]: remove darwin fat tests which
+	did not actually work.
+
+2005-02-07  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh: Add -pthread like flags when linking
+	executables too.
+	Reported by Andreas Schwab <schwab@suse.de>
+
+2005-02-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_mode_link): Allow five digits in
+	version-info.
+
+	* NEWS: s/Linux/GNU &/.
+
+2005-02-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/Makefile.am, tests/testsuite.at, tests/stresstest.at:
+	New test.  Stresses several combinations of link flags and
+	path specifications.  Uses several data types to test linkage
+	against symbols in all kinds of (e.g., ELF) sections.
+
+2005-02-03  Reid Spencer  <reid@x10sys.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh (func_generate_dlsyms): Fix broken subdir
+	path computation, exposed by using `-dlopen self'.  Fix broken
+	sed script exposed by additionally using `-export-symbols FILE'.
+
+2005-02-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* THANKS: Update.
+
+	* THANKS: Update.
+
+2005-02-03  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh [darwin]: Don't add installed libs to
+	temp_rpath when building executables on darwin, or other systems
+	which use hardcode_automatic. It may break our wrapper scripts.
+
+2005-02-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/getopt.m4sh (func_version, func_usage, func_help):
+	Exit with nonzero status on write failures.
+	* config/ltmain.m4sh (func_mode_help, func_config, func_features):
+	Ditto.
+
+	* tests/sh.test: Check for preferred function definition layout.
+
+2005-02-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	[pw32, freebsd3.[01], freebsdelf3.[01]]:  Fix [] quoting.  Should
+	fix various spurious failures.
+	(_LT_LINKER_SHLIBS) [linux with GNU ld < 2.11, aix4.[012]*]:
+	Ditto.
+	(_LT_LANG_CXX_CONFIG) [aix4.[012]*, freebsd[12], solaris2.[0-5]]:
+	Ditto.
+	(_LT_LANG_GCJ_CONFIG): Ditto.
+
+	* tests/Makefile.am: Add `atconfig' to DISTCLEANFILES.
+
+	* clcommit.m4sh: Test whether the shell understands `read -r'.
+	Use as `$read_r' if available, so `\' is preserved in commit
+	notices.
+
+	* HACKING (Editing `.m4sh' Files): Document preferred function
+	header layout.
+	* config/ltmain.m4sh (func_win32_libid, func_infer_tag)
+	(func_generate_dlsyms, func_extract_an_archive)
+	(func_extract_archives): Adjust to fit.
+
+2005-01-31  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Unicos 9 sed rejects
+	empty parentheses as in 's/x\(\)/\1/'.
+	(_LT_COMPILER_PIC) [unicos*]: wl=-Wl,.
+	* tests/sh.test: Not all sed's like '/.*\n.*/' (Unicos 9 sed
+	loops endlessly).
+
+	* tests/quote.test: Match link 	quoting against `"$wl"', not
+	`-Wl,'.
+
+	* tests/quote.test: Check for `--no-reexec' in $1 to avoid one
+	reexec.
+
+	* m4/libtool.m4 (_LT_COMPILER_C_O): _LT_TAGDECL(lt_compiler_c_o),
+	not _LT_DECL, since this is tag-dependent.
+
+	* config/ltmain.m4sh, m4/libtool.m4: Change `( cmd ) 2>/dev/null'
+	to  `{ cmd; } 2>/dev/null', when cmd has no side effects and might
+	be a builtin.  Note that it is unspecified whether cmd will run
+	within a subshell (e.g. Bourne shells) or within the current shell
+	(most modern shells).
+
+2005-01-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG) [linux]:
+	Update for Intel Compiler icc/icpc/ifort: add -i_dynamic and
+	-nofor_main, if necessary.  Simplify logic somewhat.
+
+2005-01-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/Makefile.am: also re-export CPP, CXXCPP, and the value of
+	SHELL as CONFIG_SHELL.
+	Reported by Heinz Salzmann <heinz.salzmann@micronas.com>.
+
+2005-01-26  Craig Dooley  <xlnxminusx@gmail.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* NEWS, m4/libtool.m4, config/ltmain.m4sh [dragonfly]:
+	Add support for DragonFly.
+
+2005-01-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Work around pdksh
+	positional parameter expansion bug.
+
+2005-01-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* config/ltmain.m4sh: Fix endless loop in cmdline parsing.
+
+2005-01-25  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* config/ltmain.m4sh (func_mode_link) [irix]: Preserve processor
+	option for SGI Compiler (-r[0-9][0-9]*).
+
+2005-01-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Define Bourne and XSI
+	variants of new function func_stripname for stripping literal
+	prefixes and suffixes.
+	* config/ltmain.m4sh (all over): Use func_stripname.
+
+	* tests/defs.m4sh: Extract $build from $LIBTOOL.
+	(func_configure): Pass --host if $host != $build.
+	(func_exec): Try executing cross-compiled binaries (e.g. i686 ->
+	i386), but SKIP rather than FAIL.
+	* tests/depdemo-relink.test: Do not try to access possibly non-
+	existent files.  SKIP rather than FAIL or PASS falsely when
+	cross-compiling.
+
+	* m4/libtool.m4 (_LT_SETUP) [mingw, cygwin, pw32, os2]:
+	Add _LT_DECLs for host_os, build_alias, build and build_os.
+	host_os and build were used in a few occasions in ltmain.m4sh
+	and affect above-mentioned systems, the others are added for
+	symmetry and in order to be able to detect cross-compiling.
+
+2005-01-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/Makefile.am: Add $(AM_LDFLAGS) to all per-target
+	variables *_LDFLAGS as per CVS Automake semantic change.
+
+2005-01-16  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh (func_mode_link): Don't pass through
+	compiler-like thread flags when using $LD to do the linking.
+	Use compiler_flags instead.
+	Reported by Mark_Andrews@isc.org.
+
+	* m4/libtool.m4 (LT_CMD_MAX_LEN) [osf]: On Tru64 there could
+	be a kernel panic when testing the maximum command line length
+	if exec_disable_arg_limit=1. Don't do the tests to figure it
+	out on *-osf*.
+	Reported by Dr. Hans Ekkehard Plesser
+	<hans.ekkehard.plesser@umb.no>
+
+2005-01-14  Guido Draheim  <guidod-2003-@gmx.de>  (tiny change)
+
+	* m4/libtool.m4 (AC_PROG_SED): Don't break test loop early.
+
+2005-01-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* TODO: Update.
+
+	* libltdl/ltdl.c: Whitespace cleanup.
+
+	* config/ltmain.m4sh: New option `--verbose'/`-v' to enable
+	override of `--silent'.  Verbose is the default behavior.
+	* doc/libtool.texi (Invoking libtool): Document it.
+
+	* m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [linux]: While "parsing"
+	/etc/ld.so.conf, skip comments.
+	Reported by Jens Elkner <elkner@linofee.org>.
+
+2005-01-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/libltdl/lt__glibc.h: Move all exported slist
+	symbols into the lt__* namespace.
+	* libltdl/libltdl/lt__private.h, libltdl/libltdl/slist.h:
+	Adjust includes.
+
+2005-01-10  Peter O'Gorman  <peter@pogma.com>
+
+	* config/ltmain.m4sh (func_mode_link): Fix
+	inherited_linker_flags so it puts it on the link line when
+	linking shared libraries as well as when linking executables.
+	* tests/inherited_flags.at: test inherited_linker_flags.
+	* tests/Makefile.am: Add test.
+	* tests/testsuite.at: Add test.
+	Reported by: Albert Chin-A-Young <china@thewrittenword.com>
+
+2005-01-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/sh.test: After `set dummy [...]', check for `shift'
+	within the same and following line.
+	* config/ltmain.m4sh (func_enable_tag, func_mode_install)
+	(func_mode_link): Sprinkle `shift's all over to conform to this.
+
+2005-01-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* HACKING (Editing 'ChangeLog'): Follow the GCS with respect to
+	attributions, and mention how to handle tiny changes.
+	Reported by Alexandre Duret-Lutz <adl@src.lip6.fr>.
+
+	* ChangeLog.2004: Trim 2005 entries.
+	* ChangeLog: Add missing entries.
+
+2005-01-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* ChangeLog: Move 2004 change logs from here...
+	* ChangeLog.2004: ...to here.
+
+	* m4/argz.m4, m4/libtool.m4, m4/ltdl.m4, m4/ltoptions.m4,
+	m4/ltsugar.m4, m4/ltversion.m4, m4/lt~obsolete.m4: RMS says,
+	'I think the [license of autoconf macro files] should be:
+	# This file is free software; the Free Software Foundation
+	# gives unlimited permission to copy and/or distribute it,
+	# with or without modifications, as long as this notice is
+	# preserved.'.
+
+	* ChangeLog: Reformatting.
+	* HACKING: Fix section numbering.
+	(Editing 'ChangeLog'): New notes on ChangeLog entry format.
+
+2005-01-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/am-subdir.at tests/testsuite.at (AT_BOOTSTRAP,
+	AT_LIBTOOLIZE, AT_CHECK_LIBTOOLIZE): Rename to ...
+	(LT_AT_BOOTSTRAP, LT_AT_LIBTOOLIZE, LT_AT_CHECK_LIBTOOLIZE):
+	...and make use of new names.
+
+Continued in ChangeLog.2004
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2006 b/ChangeLog.2006
new file mode 100644
index 0000000..a223ba2
--- /dev/null
+++ b/ChangeLog.2006
@@ -0,0 +1,823 @@
+2006-12-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/link-order2.at: Define our override `sin' function with
+	C binding even if $CC is a C++ compiler.  Skip the test with g++
+	as its command line driver reorders `-lm'.
+	* tests/search-path.at: Declare `inflate' with C binding.
+	* tests/stresstest.at: Avoid unused variable warnings.
+
+2006-11-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/link-order2.at: Simplify logic to be a bit more self
+	documenting.  Suggested by Gary V. Vaughan.
+
+2006-10-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/link-order2.at: Add missing $bindir setting.  Prevent
+	compiler optimization of sqrt call.  Fix logic inversion and
+	add some comments about this stunt.  Add a test with reversed
+	library link order that should fail if the system has a libm.
+	Report by Patrick Welche.
+
+2006-10-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Assume presence of a config header in all files, to provoke
+	test failures on all systems.
+	* libltdl/lt__alloc.c: Likewise.
+	* libltdl/libltdl/lt__dirent.h: Likewise.
+	* libltdl/libltdl/lt__glibc.h: Likewise.
+	* libltdl/libltdl/lt__private.h: Likewise.
+	* libltdl/libltdl/lt__strl.h: Likewise.
+	* tests/recursive.at: Use AC_CONFIG_HEADERS.
+	* tests/nonrecursive.at: Likewise.  Invoke autoheader.
+	* HACKING: Adjust.
+	Report by Patrick Welche.
+
+2006-10-24  Paul Eggert  <eggert@cs.ucla.edu>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Distributing libltdl): In recursive and
+	nonrecursive mode, a config header is now required.
+	* libltdl/argz.c: Remove check for HAVE_CONFIG_H, to conform
+	to gnulib's policy of including config.h unconditionally.
+
+2006-10-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/link-order2.at: New test to show one case where ordering
+	of depdepls on the command line matters.
+	* Makefile.am: Adjust.
+
+	* tests/tagtrace.test: SKIP if `autoconf --trace' exits 63 or 1,
+	for various possible (valid) error cases.  Also output stderr,
+	to help with analysis.
+
+	* NEWS: Account for recent multilib fix.
+	* tests/search-path.at: New test, to provide at least a weak
+	test.
+	* Makefile.am: Update.
+
+	* libtoolize.m4sh (func_fixup_Makefile): Fix missing
+	substitution for nonrecursive mode.  Remove otherwise-empty
+	continuation lines in the output file.
+	Report by Bob Friesenhahn.
+
+2006-10-22  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/config/ltmain.m4sh: Add -F* to flags that are passed
+	to the linker.
+	Reported by SIGOURE Benoit <sigoure.benoit@lrde.epita.fr>
+
+2006-10-19  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER): Improve
+	multilib support.
+	Reported by Kate Minola <kate01123@gmail.com> and others.
+
+2006-10-13  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/ltdl.c (load_deplibs): Avoid memory leak on failure.
+	(unload_deplibs): Avoid memory leak on cleanup.
+
+2006-09-20  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (func_mode_compile): Accept files with
+	extension `.f9?'.
+	* tests/suffix.test: Test `f95'.
+
+	* libltdl/config/ltmain.m4sh (func_mode_uninstall): Use
+	`func_source' consistently.
+
+2006-09-18  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [ linux ]
+	[k*bsd*-gnu ]: Fix brown paper bag: save and restore `libdir'.
+
+2006-09-17  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/duplicate_deps.at: New file.  Test circular depending
+	convenience archives (currently failing).
+	* Makefile.am: Update.
+	Report by Stefan Traby <stefan@hello-penguin.com>.
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[ openbsd ]: Set `hardcode_direct_absolute', to prefer rpath
+	over putting absolute file names in NEEDED entries.
+	* NEWS: Update.
+	Reported by Jake Meuser and others.
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [ linux ]
+	[ k*bsd*-gnu ]: Test if ld sets DT_RUNPATH; in that case, set
+	shlib_overrides_runpath to `yes'.  Fixes test failure of new
+	test on Gentoo GNU/Linux.
+
+	* tests/shlibpath.at: New file, with...
+	(shlibpath_overrides_runpath): ...new test.
+	* Makefile.am: Update.
+
+2006-09-12  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/destdir.at: New file.
+	* Makefile.am: Adjust.
+
+2006-09-11  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/inherited_flags.at: Drop `${parameter}' for `$parameter'
+	where appropriate, for improved `testsuite -x' output.
+
+2006-09-04  Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c: Move LT__UNUSED before parameter name, for g++
+	3.2.3 (on MinGW).
+	* libltdl/loaders/dld_link.c, libltdl/loaders/dlopen.c,
+	libltdl/loaders/load_add_on.c, libltdl/loaders/loadlibrary.c,
+	libltdl/loaders/preopen.c, libltdl/loaders/shl_load.c: Likewise.
+
+2006-09-04  George Bosilca <bosilca@cs.utk.edu>
+	and Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	Make libltdl work when compiled with a C++ compiler.
+
+	* libltdl/lt__alloc.c, libltdl/lt_dlloader.c, libltdl/ltdl.c,
+	libltdl/slist.c, libltdl/libltdl/lt__alloc.h,
+	libltdl/libltdl/lt_error.h, libltdl/libltdl/slist.h,
+	libltdl/loaders/dld_link.c, libltdl/loaders/dlopen.c,
+	libltdl/loaders/dyld.c, libltdl/loaders/load_add_on.c,
+	libltdl/loaders/loadlibrary.c, libltdl/loaders/preopen.c,
+	libltdl/loaders/shl_load.c, tests/stresstest.at,
+	tests/testsuite.at, tests/f77demo/foo.h, tests/fcdemo/foo.h,
+	tests/mdemo/foo.h, tests/mdemo/foo1.c, tests/mdemo/foo2.c,
+	tests/mdemo/main.c: Allow sources to be compiled by a C++
+	compiler: Cast appropriately, add C linkage for `get_vtable'
+	functions, do not use C++ keyword `delete'.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): In the dlsym
+	file, define a type for the symbol list, and declare the list
+	`extern', so that it is extern even if compiled by a C++
+	compiler.  The type definition helps avoid a compiler warning
+	against anonymous extern struct.
+	* libltdl/libltdl/lt_system.h: Add `extern' to `LT_SCOPE' for
+	the same reason.
+
+	* libltdl/argz_.h: It's __cplusplus, not _cplusplus.
+	* libltdl/libltdl/slist.h: Likewise.
+
+	* libltdl/libltdl/lt__glibc.h: Wrap included argz.h in
+	`extern "C"', for broken headers on Cygwin.
+
+2006-09-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/testsuite.at: Test `unset' on a set variable; older
+	bash versions return 1 if the variable was not set.
+
+	* tests/am-subdir.at, tests/early-libtool.at: Fix the LF vs.
+	CRLF related failures on MinGW by grepping for good output
+	instead of using AT_CHECK's `expout'.
+
+2006-09-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Drop K&R support from testsuite in favor of C89.
+
+	* tests/duplicate_members.at: provide declarations of used
+	functions.
+	* tests/testsuite.at: Drop unneeded arguments.
+	* tests/cdemo/main.c: Assume C89.
+	* tests/demo/dlmain.c: Likewise.
+	* tests/demo/main.c: Likewise.
+	* tests/depdemo/main.c: Likewise.
+	* tests/depdemo/l1/l1.c: Likewise.
+	* tests/depdemo/l2/l2.c: Likewise.
+	* tests/depdemo/l3/l3.c: Likewise.
+	* tests/depdemo/l4/l4.c: Likewise.
+	* tests/f77demo/cprogram.c: Likewise.
+	* tests/fcdemo/cprogram.c: Likewise.
+	* tests/mdemo/mlib.c: Likewise.
+	* tests/mdemo2/main.c: Likewise.
+	* tests/pdemo/longer_file_name_dlmain.c: Likewise.
+	* tests/pdemo/longer_file_name_main.c: Likewise.
+	* tests/fcdemo/fooc.c: Reformat.
+	* tests/mdemo/sub.c: Likewise.
+
+2006-08-31  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/mdemo/main.c: Fix bogus line in last patch.
+
+2006-08-31  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Avoid mixing functions and data pointers in callback functions.
+
+	* libltdl/ltdl.c (file_worker_func): New type.
+	(lt_dlforeachfile): Instead of passing a function pointer as a
+	data pointer, pass a pointer to a file_worker_func pointer.
+	(foreach_callback_func): Adjust.
+	* tests/mdemo/main.c: Assume C89. Exercise lt_dlforeachfile.
+	(callback, try_iterate, my_dirname): New functions.
+	* tests/mdemo-exec.test: Check for its output.
+
+2006-08-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/libltdl/lt__private.h (__attribute__, LT__UNUSED):
+	New macros.
+	* libltdl/loaders/dld_link.c: Use LT__UNUSED where
+	appropriate.
+	* libltdl/loaders/dlopen.c, libltdl/loaders/load_add_on.c,
+	libltdl/loaders/loadlibrary.c, libltdl/loaders/preopen.c,
+	libltdl/loaders/shl_load.c: Likewise.
+	* libltdl/ltdl.c: Likewise.
+	(find_file_callback): Fix declaration names to match definition.
+	(load_deplibs) [!LTDL_DLOPEN_DEPLIBS]: Use separate definition
+	for less preprocessor clutter.
+
+	* Makefile.am (check-local, installcheck-local): Use
+	`TESTSUITEFLAGS' rather than `TESTSUITE_FLAGS', like Autoconf.
+	* HACKING, README, README.alpha: All uses changed.
+
+2006-08-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/argz.c: Use `#ifdef HAVE_CONFIG_H', to facilitate code
+	sharing with gnulib.  Report by Eric Blake.
+	* libltdl/lt__alloc.c, libltdl/libltdl/lt__dirent.h,
+	libltdl/libltdl/lt__glibc.h, libltdl/libltdl/lt__private.h,
+	libltdl/libltdl/lt__strl.h: Likewise.
+	* HACKING: Update.
+
+2006-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Pass through
+	`--coverage' and `-pg', for GCC.  Report by Rainer Keller
+	<keller@hlrs.de> and Tor Lillqvist <tml@iki.fi>.
+
+2006-08-25  Kurt Roeckx <kurt@roeckx.be>,
+	    Aurelien Jarno <aurel32@debian.org>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG) [k*bsd*-gnu]: kfreebsd*-gnu and
+	knetbsd*-gnu behave like linux-gnu.
+	* libltdl/m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS): Likewise.
+	* libltdl/m4/libtool.m4 (_LT_ENABLE_LOCK)
+	[x86_64-*kfreebsd*-gnu]: Add 32/64 bit bi-arch support.
+	* NEWS: Update.
+
+2006-08-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD) [ mingw,pw32 ]:
+	If `file' is present, use `func_win32_libid' rather than
+	`objdump -f', to facilitate cross-compilation.
+	Reported by Pierre Ossman <ossman@cendio.se>.
+
+2006-08-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): In GNU ld script,
+	do not quote object file names, for Intel icc 9.0 IPO link.
+
+2006-08-22  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/m4/ltdl.m4 (LTDL_INIT): Avoid macros marked obsolete in
+	latest autoconf.
+	* libltdl/m4/libtool.m4 (_lt_cv_sys_global_symbol_pipe): Work in
+	spite of -Wmissing-prototypes.
+	* libltdl/libltdl/lt__dirent.h: Rewrite to accomodate loss of
+	AC_HEADER_DIRENT.
+
+	* libltdl/m4/libtool.m4: Avoid space-tab.
+
+2006-08-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_execute): Also search
+	the directory above `$objdir' for the argument of "-dlopen", as
+	mentioned in the error message.
+
+2006-08-03  Ralf Menzel  <menzel@ls6.cs.uni-dortmund.de>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_HIDDEN_LIBDEPS): Fix issues
+	with previous patch. for ... do' line is superflous. Need
+	_LT_TAGVAR not _LT_AC_TAGVAR, should be for both linux and
+	solaris with Sun compiler.
+
+2006-08-01  Albert Chin <china@thewrittenword.com>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_HIDDEN_LIBDEPS) [ solaris ]:
+	Don't set $postdeps to "-lCstd -lCrun" if
+	"-library=stlport4" set in CXXFLAGS as stlport4 C++
+	library incompatible with Cstd C++ library. Use
+	'-library=Cstd -library=Crun' instead of '-lCstd -lCrun'.
+
+2006-07-28  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD, LT_OUTPUT):
+	s/recognise/recognize/.
+
+2006-07-22  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/ltdl.c (loader_init_callback) [HAVE_LIBDLLOADER]:
+	Protect definition to avoid compiler warnings about unused
+	function.
+
+2006-07-21  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/m4/ltdl.m4 (LT_LIB_DLLOAD): Search for dlopen without
+	depending on -ldl, required by cygwin 1.5.20.
+
+2006-06-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_BOILERPLATE)
+	( _LT_LINKER_BOILERPLATE): Rewrite to not use unchecked
+	`printf', for old systems like SunOS 4.1.
+	(_LT_COMPILER_OPTION, _LT_LINKER_OPTION)
+	(_LT_COMPILER_C_O, _LT_LINKER_SHLIBS): Likewise.
+	(_LT_LANG_C_CONFIG): Adjust: use literal newlines in
+	`lt_simple_compile_test_code' and `lt_simple_link_test_code'.
+	(_LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG, _LT_LANG_FC_CONFIG)
+	(_LT_LANG_GCJ_CONFIG, _LT_LANG_RC_CONFIG): Likewise.
+	Bug report by Bruce Becker and Mark Andrews.
+
+2006-06-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix the bugs where libtoolize needs to use `dir/file' instead of
+	`./dir/file', where ltdldir is `.', so that libtoolize correctly
+	checks for (and suggests) `config' and `m4' instead of
+	`./config' and `./m4' as auxiliary resp. macro directories.
+	The change is necessary for unambiguous naming, the chosen way
+	plays better with non-GNU make in VPATH builds.
+
+	* libtoolize.m4sh (ltdlprefix): New variable, to use as prefix
+	instead of `$ltdldir/'.
+	(func_check_macros): Use it.  Bug report by Eric Blake.
+
+2006-06-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix several libtoolize-related bugs:
+	- Do not symlink aclocal.m4, to work around a bug in aclocal
+	overwriting the linked-to file instead of removing the symlink.
+	- Have `libtoolize --copy' cause current time stamps, so that
+	dependents will be rebuilt; for this, install files in order.
+	- Fix list of distribution files for (non)recursive libltdl.
+	- Fix some failure cases.
+
+	* libtoolize.m4sh (func_copy_cb):
+	If `$opt_link', still copy `aclocal.m4', so a subsequent
+	`aclocal' will not overwrite the symlink target.
+	In `--copy' mode, do `cp -p' and `touch' for each file, so
+	timestamps are updated but permissions preserved.
+	(main): Reorder installing of files to match logical order
+	and timestamp requirements.
+	(func_fixup_Makefile_inc): Renamed to
+	(func_fixup_Makefile): this.  Add sed scriptlet to remove
+	non-existent files from EXTRA_DIST, for either nonrecursive
+	or recursive mode.
+	(main): call it to mangle also in recursive mode.
+	* tests/libtoolize.at (expout): Adjusted.
+	* tests/testsuite.at (tst_dist): Default to `dist'.
+
+2006-06-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix libltdl to always have all generated files up to date.
+
+	* Makefile.am (all-local): Depend on all generated files in
+	libltdl, namely...
+	(libltdl/aclocal.m4, libltdl/configure, libltdl/config-h.in):
+	...these.  List explicitly, including dependencies and
+	rebuilding rules, using...
+	(sub_aclocal_m4_deps, sub_configure_deps): ...these new
+	variables.
+	Report by Dan Lacher <Dan.Lacher@Sun.Com>.
+
+2006-06-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (install-data-local): Do not use $(INSTALL_DATA)
+	from another directory: it may use a relative path to
+	`install-sh'.
+	Bug report by Dan Lacher <Daniel.Lacher@Sun.COM>.
+
+2006-06-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Honor `-threads',
+	similar to `-mt'.
+	Report by Eric Paire <eric.paire@st.com>.
+
+2006-06-01  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [ cygwin ]:
+	define DLL_EXPORT for PIC objects on cygwin.
+
+2006-05-24  Albert Chin  <china@thewrittenword.com>
+
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG)
+	[ aix4*, aix5*, hpux10*, hpux11* ]: Set hardcode_direct_absolute
+	for CXX tag too!
+
+2006-05-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link, shell wrapper):
+	Do not put `"$@"' in argument to $ECHO.
+
+2006-05-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4: Bump serial, necessary because of
+	_LT_CHECK_SHELL_FEATURES changes.
+
+2006-05-18  Albert Chin-A-Young <china@thewrittenword.com>
+
+	* tests/early-libtool.at: Pass $CPPFLAGS and $CFLAGS to
+	compiler when compiling for extra flags that might be
+	needed for ANSI-compliance, 64-bit, etc. The environment
+	we compile with should match the environment libtool was
+	compiled with.
+
+2006-05-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix mode=compile time regression of CVS HEAD over branch-1-5.
+
+	* libltdl/m4/libtool.m4 (_LT_CHECK_XSI_SHELL): Rename to...
+	(_LT_CHECK_SHELL_FEATURES): ...this.
+	(_LT_SETUP): Adjust caller.
+	(_LT_CHECK_XSI_SHELL): New libtool variables `lt_unset',
+	`SP2NL', `NL2SP', to contain results from tests for unset,
+	taken from AS_BOURNE_COMPATIBLE, and ASCII vs EBCDIC, taken...
+	* libltdl/config/general.m4sh: ...from here, and used...
+	* libltdl/config/ltmain.m4sh: ...here everywhere now.
+	* (AS_SHELL_SANITIZE): Replace by faster, actually necessary
+	part of its expansion, taken from current Autoconf CVS.  Do not
+	save and set all locale variables any more, but only LANG,
+	LC_ALL, LC_CTYPE, LC_COLLATE, LC_MESSAGES.
+	(func_mode_execute): Adjust.
+	* libltdl/m4/libtool.m4 (_LT_CONFIG): No need to unset CDPATH
+	here any more.
+	* libtoolize.m4sh: Compute `SP2NL' and `NL2SP' here, too.
+
+2006-05-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/config/ltmain.m4sh, libltdl/m4/libtool.m4
+	(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG,
+	_LT_LANG_FC_CONFIG), tests/link-order.at
+	[ aix4*, aix5*, hpux10*, hpux11* ]: rename
+	hardcode_direct_static to hardcode_direct_absolute.
+	* doc/libtool.texi (libtool script contents): Adjust.
+
+	* libltdl/ltdl.c (lt_dlhandle_fetch): Arguments to
+	lt_dlhandle_iterate were in the wrong order.
+
+2006-05-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_OPTION): Require
+	_LT_DECL_SED.
+	(_LT_CMD_GLOBAL_SYMBOLS, _LT_LINKER_SHLIBS): Likewise.
+	* libltdl/m4/ltdl.m4 (LTDL_INIT): Likewise.
+	(_LT_DECL_SED): Set $Xsed here, using $SED.  Moved from...
+	(_LT_SETUP): ...here.
+	Report by Eric Blake.
+
+2006-05-17  Gary V. Vaughan  <gary@gnu.org>
+
+	* doc/libtool.texi (libtool script contents): Document new
+	hardcode_direct_static variable.
+
+	* tests/link-order.at: Be careful about usage of shrext_cmds.
+
+	* libltdl/m4/libtool.m4 (LT_AC_PROG_SED):  Declarations for
+	compatibility with old versions of libtool, and old versions
+	of aclocal.
+
+2006-05-17  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libltdl/config/ltmain.m4sh, libltdl/m4/libtool.m4
+	(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG,
+	_LT_LANG_FC_CONFIG) [ aix4*, aix5*, hpux10*, hpux11* ]:
+	Introduce a new variable, hardcode_direct_static, which
+	would ignore hardcode_direct=yes if the result would create a
+	static library dependency. Static library dependencies are
+	immune to $shlibpath_var.
+	* tests/link-order.at: Take hardcode_direct and
+	hardcode_direct_static into consideration when testing
+	link order.
+
+2006-05-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Eliminate quadratic scaling in argument parsing loop, for
+	shells that understand `var+=value', such as Bash-3.1, or Zsh.
+
+	* libltdl/m4/libtool.m4 (_LT_CHECK_XSI_SHELL): Test whether
+	the shell understands `var+=value'.
+	(_LT_PROG_XSI_SHELLFNS): Define `func_append' based on this.
+	* config/ltmain.m4sh (func_mode_link): Use `func_append' for
+	compile_command, finalize_command, libtool_args, libobjs,
+	non_pic_objects.
+
+2006-05-15  Bruno Haible  <bruno@clisp.org>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG, _LT_SYS_HIDDEN_LIBDEPS) [ linux ]:
+	Add support for Sun C 5.9, Sun C++ 5.9, and Sun Fortran 8.3 on
+	GNU/Linux.
+	* NEWS: Update.
+
+2006-05-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (check-local): Move `$(TESTS_ENVIRONMENT)' and
+	`$(BUILDCHECK_ENVIRONMENT)' to be arguments of `testsuite', so
+	that reruns will remember it; set enviroment variable
+	`CONFIG_SHELL' so the suite will know which shell it was started
+	with.
+	(installcheck-local): Likewise, for `$(TESTS_ENVIRONMENT)' and
+	`$(INSTALLCHECK_ENVIRONMENT)'.
+	* tests/testsuite.at (LT_AT_TAG): Do not set the compiler
+	variable here.
+
+2006-05-14  Albert Chin-A-Young  <china@thewrittenword.com>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[ aix ]: $hardcode_direct is set twice.
+
+2005-05-14  John Bowler  <jbowler@acm.org>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): For version_type
+	`none', we still need to set `current', `age', and `revision',
+	so that our checks don't barf.  The values won't be used later.
+	Apparently reported by several people, several times, for BeOS.
+	* NEWS, THANKS: Update.
+
+2006-05-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/fail.at: Use "test -x" if available, for testing of
+	executables; code modified from Autoconf's AS_EXECUTABLE_P.
+	Reported by Albert Chin <china@thewrittenword.com>.
+
+2006-04-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_write_libtool_object):
+	New function, factored out from..
+	(func_mode_compile): .. here.  Call it to generate the libtool
+	object file (the `.lo' file) in one step.
+
+2006-04-03  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/loaders/preopen.c: Don't allow lt_dlopen if the
+	module has no symbols.
+
+2006-03-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [ linux ]:
+	Avoid warning when "parsing" `/etc/ld.so.conf' and empty
+	`/etc/ld.so.conf.d'.
+	Reported by Orion Poplawski <orion@cora.nwra.com>.
+
+2006-03-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* bootstrap: Actually use the correct version of the last patch.
+
+2006-03-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* bootstrap: Enable `WORKING_LIBOBJ_SUPPORT' if we detect
+	Autoconf-2.60+ and Automake-1.10+, or CVS versions.
+
+	* libltdl/m4/argz.m4 (gl_FUNC_ARGZ): Sync with gnulib:  If we
+	define `error_t', also define `__error_t_defined', so argp.h
+	will not typedef the former.
+
+2006-03-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS) [ freebsd ]
+	[ dragonfly ]: Set libltdl_cv_sys_dlopen_deplibs to yes.
+	Fixes excessive lt_dlopen times on these systems.
+	* NEWS, THANKS: Update.
+	Bug reported by Peter Jeremy <peterjeremy@optushome.com.au>,
+	patch by Joerg Sonnenberger <joerg@netbsd.org>.
+
+2006-03-20  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/static.at: New tests for comprehensive test exposure of
+	all current and proposed static linking flags for programs.
+	* Makefile.am: Updated.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link)
+	< -static-libtool-libs >: New option.
+	* doc/libtool.texi (Link mode, Distributing libltdl):
+	Document it.
+	Suggested by Gary Kumfert <kumfert@llnl.gov>.
+
+2006-03-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/tagdemo/foo.cpp, tests/tagdemo/main.cpp [ hpux ] <aCC>:
+	The HPPA C++ compiler has namespace support but provides no
+	`std' namespace; just provide it with a dummy.
+
+	* libltdl/m4/libtool.m4 (AC_PROG_SED): Do not forget to reset
+	IFS even in case of empty `$PATH'.
+
+2006-03-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Comment out the
+	code to remove uninstalled paths, as it is wrong here.  Change
+	the wrong shell quoting that kept it from "working" before.
+	* THANKS: Updated.
+
+	* libltdl/m4/libtool.m4 (AC_LIBTOOL_SYS_DYNAMIC_LINKER)
+	[ freebsd, dragonfly ]: Fix 1.5.22 regression caused by too
+	strict $host_os match that stopped DragonFly from working.
+	* THANKS: Updated.
+	Reported by Jeremy C. Reed <reed@reedmedia.net>,
+	patch by Todd Vierling <tv@duh.org>.
+
+2006-02-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (startup): save all locale specific
+	environment, variables:, LANG, LANGUAGE, LC_ADDRESS, LC_ALL
+	LC_COLLATE, LC_CTYPE, LC_IDENTIFICATION, LC_MEASUREMENT,
+	LC_MESSAGES LC_MONETARY, LC_NAME, LC_NUMERIC, LC_PAPER,
+	LC_TELEPHONE, LC_TIME.
+	(func_mode_execute): Restore them.
+
+2006-02-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Tags): Mention `FC'.
+	(libtool script contents) <CC>: Specify more precisely as the
+	compiler of the current tag.
+	<LTCC, LTCFLAGS, build, build_alias, build_os, host_alias,
+	host_os, macro_version, macro_revision, max_cmd_len>:
+	Document these variables.
+
+2006-02-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi: Update copyright years.
+
+	* libltdl/config/getopt.m4sh (func_help): Substitute `$host'.
+	* libltdl/config/ltmain.m4sh (help message): Use $host not
+	@host_triplet@, as the `@..@' substitution is done at bootstrap
+	time already.
+	Reported by Julien Lecomte <julien@famille-lecomte.net>.
+
+	* doc/libtool.texi (Implementation issues):  Note that both
+	prefix and suffix of a library may differ.
+	(Using libtool, Creating object files, Linking libraries):
+	Remove last documentation traces of the age when `foo.lo' was
+	the PIC object file and not the `libtool object' text file.
+	(libtool script contents) <compiler_o_lo>: Remove description
+	of this variable.  It was removed from libtool in 1.5 times.
+
+2006-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link) [ linux ]:
+	PGI: for `reload_cmds', we not only need to get rid of `$wl',
+	but also turn comma into space so $LD understands
+	whole_archive_flag_spec correctly.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link) <shell wrapper>:
+	Add _AS_BOURNE_COMPATIBLE code from Autoconf, to fix issues
+	with zsh and other shells.
+	Reported by David Gómez Espinosa <david@pleyades.net>.
+
+2006-02-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (AC_PROG_SED): m4_defun this rather
+	than AC_DEFUN, so that old aclocal does not pick this up.
+
+	* Makefile.am ($(TESTSUITE)): Also depend on `Makefile.am'.
+	Write to temporary file and rename.
+
+2006-02-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (EXTRA_DIST): Add `$(srcdir)/' to all generated
+	files so that non-GNU make programs will use the rebuilding
+	rules.
+
+	* tests/testsuite.at: Add new keyword `libtoolize' for tests
+	that exercise the `libtoolize' script that is generated at build
+	time.
+	* HACKING: Update testsuite mention, explain keywords.
+
+	* libltdl/config/ltmain.m4sh (extracted_archives)
+	(extracted_serial): New globals.
+	(func_extract_archives): Use them to rename extraction archives
+	for linking against multiple convenience libraries with the same
+	name.
+	* tests/duplicate_conv.at: New tests.
+	* Makefile.am: Adjusted.
+	Reported by Carlo Contavalli <ccontavalli@commedia.it>.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link) < test_compile >:
+	Fix a couple of instances where `test .. -ne ..' would possibly
+	compare non-numbers.  Clean up a bit.
+
+	* tests/convenience.at, tests/deplibs-ident.at: Add new keyword
+	`libtool' for tests that exercise the unmodified `libtool'
+	script that is generated at build time.
+	* tests/duplicate_members.at, tests/fail.at: Likewise.
+	* tests/inherited_flags.at, tests/link-order.at: Likewise.
+	* tests/stresstest.at, tests/template.at: Likewise.
+
+2006-02-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/fail.at: Also pass a bogus object file to the linker so
+	it fails more reliably; AIX and IRIX linkers ignore duplicate
+	symbol definitions.
+
+	* libltdl/m4/libtool.m4 [ solaris ] (_LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG) < whole_archive_flag_spec >:
+	Fix this once and for all, for both the SUN compiler suite
+	(cc/CC/f77/f90/f95) and GCC.
+	Reported by Yuri Pukhalsky <pooh@cryptopro.ru>.
+
+	* tests/cdemo/Makefile.am: Remove broken use of undocumented
+	Automake variable `$(OBJECTS)'.
+	* tests/demo/Makefile.am, tests/depdemo/Makefile.am: Likewise.
+	* tests/f77demo/Makefile.am, tests/fcdemo/Makefile.am: Likewise.
+	* tests/mdemo/Makefile.am, tests/mdemo2/Makefile.am: Likewise.
+	* tests/pdemo/Makefile.am, tests/tagdemo/Makefile.am: Likewise.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Fix logic for
+	adding run paths to also add paths for installed libtool
+	libraries in case `-static' is used.
+
+2006-02-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (TESTSUITE_AT): List testsuite files in the order
+	in which they are to be expanded in the suite.
+	(tests/TESTSUITE): Rebuild by passing all $(TESTSUITE_AT) files,
+	with their path suitably adjusted.  This enables us to..
+	* tests/testsuite.at: ..get rid of their redundant mention here.
+
+2006-01-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (titlepage): Remove superfluous word.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Fix matching
+	duplicate run path entries with the correct separator.
+
+	* tests/testsuite.at (PREPARE_TESTS): Escape `^' for some older
+	shells.
+
+	* ChangeLog, HACKING, README, README.alpha,
+	libltdl/config/ltmain.m4sh:  Add vi(m) modelines, to match emacs
+	formatting variables.
+
+2006-01-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (libltdl/Makefile.am): Fixup sed script.
+	Reported by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>.
+
+2006-01-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am, bootstrap, clcommit.m4sh,
+	libltdl/config/getopt.m4sh, libltdl/config/mailnotify.m4sh,
+	tests/sh.test, tests/testsuite.at: Bump copyright years.
+
+2006-01-21  Eric Blake  <ebb9@byu.net>
+
+	* THANKS: Move myself to contributor.
+
+2006-01-21  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* bootstrap: Don't use semicolons inside { } in sed scripts, as
+	Posix says it's not portable.
+	* Makefile.am (libltdl/Makefile.am): Likewise.
+	* libtoolize.m4sh (all over the map): Likewise.
+	* libltdl/config/getopt.m4sh (func_version, func_usage)
+	(func_help): Likewise.
+	* libltdl/config/ltmain.m4sh (func_win32_libid): Likewise.
+	* libltdl/m4/libtool.m4 (_LT_SYS_MODULE_PATH_AIX): Likewise.
+	* clcommit.m4sh, libltdl/config/mailnotify.m4sh: Likewise.
+	* tests/sh.test, tests/testsuite.at (LT_AT_TAG): Likewise.
+	Noted by Paul Eggert <eggert@cs.ucla.edu>.
+
+	* libltdl/config/ltmain.m4sh (func_mode_compile): Also transform
+	`.obj' correctly.
+	Reported by George Bosilca <bosilca@cs.utk.edu>.
+
+2006-01-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC): Fix my forward port
+	error of last commit.
+
+2006-01-12  Leif Ekblad  <leif@rdos.net>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC): Added support for
+	RDOS.
+	* NEWS: Updated.
+
+2006-01-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libtoolize.m4sh, libltdl/config/general.m4sh,
+	libltdl/config/getopt.m4sh, libltdl/config/ltmain.m4sh,
+	libltdl/m4/libtool.m4: Bump copyright years.
+
+2006-01-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (EXTRA_DIST): Add ChangeLog.2005.
+
+	* README, README.alpha: Adjust copyright years.
+	* ChangeLog.2005: New, rotated, from..
+	* ChangeLog: ..here.
+
+Continued in ChangeLog.2005
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2007 b/ChangeLog.2007
new file mode 100644
index 0000000..0b2778b
--- /dev/null
+++ b/ChangeLog.2007
@@ -0,0 +1,1377 @@
+2007-11-30  Stefan Sperling  <stsp@elego.de>  (tiny change)
+
+	* doc/libtool.texi (Linking executables): Reorder paragraphs.
+
+2007-11-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [ linux ]: The IBM
+	XL 8.0 C++ compiler may also be called xlc++*, not only xlC*.
+	Report by Nysal K Jan <jnysal@in.ibm.com>.
+
+2007-11-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_CHECK_BUILDDIR): New macro.
+	Warn about whitespace in the absolute build tree name.
+	(LT_INIT): Use it.
+	* THANKS: Update.
+	Report by Jim Meyering.
+
+	* libltdl/config/ltmain.m4sh (func_extract_an_archive)
+	(func_extract_archives): Add some quoting.
+
+2007-11-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Use `${top_build_prefix}' for better compatibility with non-GNU make.
+	* libltdl/m4/ltdl.m4 (_LT_BUILD_PREFIX): New macro.
+	If the Autoconf version used is >= 2.62, then expand to
+	`${top_build_prefix}', otherwise to `${top_builddir}/'.
+	(LTDL_CONVENIENCE, LTDL_INSTALLABLE): Use it for defining
+	LIBLTDL.  Fixes a build failure with AIX make in a package
+	using convenience libltdl in nonrecursive mode.
+	* doc/libtool.texi (Distributing libltdl): Document requirements
+	to define `top_build_prefix' if Automake is not used.
+	Report by Bob Friesenhahn.
+
+2007-11-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Avoid warnings about conftest.dSYM directories on Mac OS X Leopard.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_BOILERPLATE)
+	(_LT_LINKER_OPTION, _LT_CMD_GLOBAL_SYMBOLS): Remove
+	conftest.dSYM directory.
+	Report and analysis by Jeff Squyres and Peter O'Gorman.
+
+2007-11-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/configure.ac: Drop the broken and long-disabled code
+	to output a banner for the libltdl configure.  Avoids the need
+	to ship mkstamp with libltdl.
+
+2007-11-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/runpath-in-lalib.at: New test.
+	* Makefile.am: Update.
+	Report by Benoit SIGOURE <tsuna@lrde.epita.fr>.
+
+2007-10-16  Eric Blake  <ebb9@byu.net>
+
+	Speed up bootstrap by improving lt_join.
+	* libltdl/m4/ltsugar.m4 (lt_join, _lt_join): Rewrite to mirror
+	Autoconf 2.62's faster implementation.
+
+2007-10-12  Eric Blake  <ebb9@byu.net>
+
+	Whitespace cleanup.
+	* libltdl/m4/ltsugar.m4: Avoid space-tab in indents.
+	* libltdl/m4/libtool.m4: Avoid trailing space.
+
+	Deal with Autoconf 2.62's semantic change in m4_append.
+	* libltdl/m4/ltsugar.m4 (lt_append): Replace broken versions of
+	m4_append.
+	(lt_if_append_uniq): Don't require separator to be overquoted, and
+	avoid broken m4_append.
+	(lt_dict_add): Fix typo.
+	* libltdl/m4/libtool.m4 (_LT_DECL): Don't overquote separator.
+
+2007-10-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh: Also sanitize `LANGUAGE'.
+	(func_mode_execute): Also restore `LANGUAGE', for old glibc.
+	Report by Paul Eggert against Autoconf.
+
+2007-10-11  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/.cvsignore: Ignore argz.h.
+
+2007-10-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC)
+	<lt_cv_prog_compiler_pic_works>: Renamed from
+	lt_prog_compiler_pic_works.
+	<lt_cv_prog_compiler_static_works>: Renamed from
+	lt_prog_compiler_static_works.
+	* NEWS: Update.
+
+2007-10-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_compile): Accept
+	extension `.sx'.
+	* tests/suffix.test: Test it.
+
+2007-09-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/lt_dlloader.c (loader_callback, lt_dlloader_get): Use
+	NULL, not 0, for the benefit of too picky compilers like PGI.
+	* slist.c (slist_tail): Likewise.  Include stddef.h, for NULL.
+	Report by Jeff Squyres.
+
+2007-09-05  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/ltdl.c (lt_dlcaller_get_data): Work even when no caller
+	has set data.
+
+2007-09-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (User defined module data)
+	<lt_dlinterface_register>: Document that a NULL place matches
+	all modules.
+	* libltdl/lt_dlloader.c (lt_dlloader_remove): Actually iterate
+	over all open modules when looking for modules that use it.
+	If a resident module is found, return but do not set the error
+	string.
+	* libltdl/ltdl.c (lt_dlexit): When removing dlloaders, ignore
+	errors that stem from earlier failed commands.  Exposed by the
+	lt_dladvise test.
+	Fixes regression over branch-1-5.
+	Memleak report as Coverity CID 19 via Jeff Squyres.
+
+2007-09-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* NEWS: Update.
+
+	* libltdl/ltdl.c (trim): Fix possible write beyond array bound.
+
+	* libltdl/ltdl.c (lt_dlopenadvise): Instead of asserting, return
+	FILE_NOT_FOUND if the filename is "".
+
+	* libltdl/ltdl.c (try_dlopen): Fix computation of extension,
+	avoids subtracting pointer from NULL pointer.
+
+	* libltdl/ltdl.c (try_dlopen, lt_dlforeachfile): Do not test
+	array address of sys_dlsearch_path against NULL, rather test for
+	nonempty contents.
+	Coverity reports CID 148 and CID 149 via Jeff Squyres.
+
+	* libltdl/ltdl.c (tryall_dlopen_module): Fix string length
+	computation: do not allocate more than needed.
+
+2007-08-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/loaders/preopen.c (vm_close): `module' is unused.
+	Coverity report CID 158 via Jeff Squyres.
+
+	* libltdl/ltdl.c (parse_dotla_file): If we run out of memory,
+	do not close the .la file twice.
+	Coverity report CID 440 via Jeff Squyres.
+
+	* libltdl/ltdl.c (has_library_ext): Remove dead code.
+	Coverity report CID 561 against Open MPI via Jeff Squyres.
+
+2007-08-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/slist.c (slist_remove): When a matching item is found,
+	break out of the loop to return the first match; also fixes
+	possible NULL dereference.
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG) [ linux ]: Add support for IBM XL 8.0
+	C/C++ (xlc*, xlC*) and IBM XL Fortran 10.1 (xlf*) on GNU/Linux,
+	tested on ppc, pending a $shlibpath_var related fix.
+	(_LT_SYS_HIDDEN_LIBDEPS): Double-quote $output_verbose_link_cmd
+	properly during evaluation, obsoleting $no_glob_subst mangling.
+	* NEWS: Update.
+
+2007-08-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [ linux ]
+	[ k*bsd*-gnu ] <shlibpath_overrides_runpath>: Avoid spurious
+	output in runpath test.
+
+2007-08-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [ mingw, cygwin ]
+	<GCJ>: Do not use -DDLL_EXPORT.
+	Report by Ross Ridge <rridge@csclub.uwaterloo.ca>.
+
+	* Makefile.am (edit): Do not warn against manual editing for the
+	generated files libtool, libtoolize, libltdl/m4/ltversion.m4,
+	tests/defs, as they are still in a preferred source code form as
+	required by GPL.
+	Report by DJ Delorie.
+
+2007-08-15  Dirk Mueller  <dmueller@suse.de>  (tiny change)
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (parse_dotla_file): Avoid a strlen.  When
+	reading .la files, cope with files that are not
+	newline-terminated.
+
+2007-08-05  Tilman Koschnick  <til@subnetz.org>  (tiny change)
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LANG_CXX_CONFIG)
+	[ linux ]: Treat pgcpp as Portland Group C++ compiler as well.
+
+2007-08-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (try_dlopen): Use `attempt' rather than
+	`filename', as the former has the needed extension when called
+	by lt_dlopenext.
+	Report by Brian Barrett.
+
+2007-07-27  Peter Rosin  <peda@lysator.liu.se>
+
+	* Makefile.am: Pass STRIP through to the testsuite, so that
+	tests that run configure will use the same strip program.
+
+2007-07-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/mdemo-exec.test: Also try absolute library names.
+	* tests/mdemo/main.c (test_dl, main): Try lt_dlopenext as well.
+	* THANKS: Update.
+	Report by Brian Barrett.
+
+2007-07-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/fdl.texi: Update to GFDL 1.2.
+	* doc/libtool.texi: Adjust.  Put License in Appendix.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Remove each
+	intermediate relinked object after use, to avoid quadratic space
+	complexity when linking partially.
+	Report by Isidor Zeuner <eezyy@gmx.net>.
+
+2007-07-23  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/config/ltmain.m4sh: Whitespace cleanup.
+
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src)
+	<chase_symlinks>: Avoid compiler warning.
+
+2007-07-22  Peter Rosin  <peda@lysator.liu.se>
+
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src): Add
+	support for Microsoft Visual C. Also, older MinGW versions
+	seem to need stdint.h to find intptr_t.
+
+2007-07-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [linux]:
+	Ignore lines in ld.so.conf starting with 'hwcap '.
+
+2007-07-16  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* tests/cdemo-exec.test: use $EXEEXT where appropriate
+	to correct mingw cross-compile issues.
+	* demo-deplibs.test: Ditto.
+	* demo-exec.test: Ditto.
+	* demo-inst.test: Ditto.
+	* demo-relink.test: Ditto.
+	* depdemo-exec.test: Ditto.
+	* depdemo-inst.test: Ditto.
+	* depdemo-relink.test: Ditto.
+	* f77demo-exec.test: Ditto.
+	* fcdemo-exec.test: Ditto.
+	* mdemo-exec.test: Ditto.
+	* mdemo-inst.test: Ditto.
+	* mdemo2-exec.test: Ditto.
+	* pdemo-exec.test: Ditto.
+	* pdemo-inst.test: Ditto.
+	* tagdemo-exec.test: Ditto.
+
+2007-07-14  Peter Rosin  <peda@lysator.liu.se>
+
+	* AUTHORS, THANKS: Peter Ekberg got married, now Peter Rosin.
+
+2007-07-13  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/m4/libtool.m4 (func_dirname_and_basename) <XSI>:
+	New function.
+	(func_dirname_and_basename) <!XSI>: New function.
+	* libltdl/config/ltmain.m4sh (func_ltwrapper_scriptname):
+	Call it.  Also, take advantage of missed optimization using
+	func_dirname's additional arguments.
+	(func_mode_compile): Call it.
+	(func_mode_install): Call it.
+	(func_mode_link): Call it.
+
+2007-07-12  Peter Rosin  <peda@lysator.liu.se>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Strip the cwrapper
+	using $STRIP instead of relying on the tools to support -s, which
+	MSVC doesn't.
+
+2007-07-06  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/config/libtool.m4sh: Don't pass -msg_* through to the
+	linker.
+	Reported by Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+2007-07-04  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	* libltdl/lt__alloc.c, libltdl/loaders/preopen.c,
+	libltdl/loaders/dyld.c, libltdl/loaders/dlopen.c, libltdl/ltdl.c,
+	libltdl/lt_error.c, libltdl/lt_dlloader.c, libltdl/lt__dirent.c:
+	Include lt__private.h prior to any system headers.
+	* libltdl/lt__alloc.c: Remove redundant inclusion of configuration
+	header.
+
+2007-07-04  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/ltdl.c (advise_dup): Delete function no longer used
+	after memleak fix three days ago.
+
+2007-07-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_ENABLE_LOCK) [ solaris ]: Cater to
+	old Sparc Solaris 7 ld that does not understand `-64'.
+	Report by Vincent Lefevre <vincent@vinc17.org>.
+
+2007-07-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/lt~obsolete.m4 (LTOBSOLETE_VERSION): New macro, to
+	force-pull in this file by aclocal.
+	* libltdl/m4/libtool.m4 (LT_INIT): Require LTOBSOLETE_VERSION.
+	* tests/libtoolize.at (upgrading verbatim style aclocal.m4):
+	Adjust.
+	Report by H. J. Lu <hjl@lucon.org>.
+
+	* libltdl/ltdl.c (tryall_dlopen): Rename argument to have typed
+	alias of `advise' instead of allocating a copy.  Fixes memleak.
+
+2007-06-30  Peter Breitenlohner  <peb@mppmu.mpg.de>
+
+	* libltdl/m4/libtool.m4 (LT_SYS_DLOPEN_SELF): Correct a typo
+	("-dld" instead of "-ldld").
+
+2007-06-24  Gary V. Vaughan  <gary@gnu.org>
+
+	Add a test to simulate a failure visible on systems which
+	need a library prefix like 'lib', such as BeOS.  Fix a number
+	of bugs exposed by this test in order for it to pass.
+	Currently the prefix is hardcoded as 'lib', as I am not aware
+	of systems that require a different prefix:
+
+	* libltdl/loaders/preopen.c (lt_dlpreload_open):  Move error
+	condition out of test loop to be sure that each originator is
+	tried, instead of erroring out if the first doesn't match.
+	Support passing NULL as the originator to load all preloaded
+	modules originating in the program itself.
+	* libltdl/lt_dlloader.c (lt_dlloader_dump): New debug function.
+	* libltdl/libltdl/lt_dlloader.h (lt_dlloader_dump): Declare it
+	when LT_DEBUG_LOADERS is defined at compile time.
+	* libltdl/ltdl.c (lt_dlinit): Dump loader list after successful
+	initialisation.
+	(tryall_dlopen): Add a new VTABLE parameter to force use of a
+	specific loader in preference to trying every loader in turn.
+	Adjust all callers.
+	(try_dlopen): Always see whether a module was preloaded for
+	module names with no directory component before searching the
+	filesystem for a match.
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Declare
+	a new global_symbol_to_c_name_address_lib_prefix variable.
+	(global_symbol_to_c_name_address_lib_prefix): The sed
+	expressions to use when a lib prefix is enforced need to be
+	slightly different to work with preloaded modules.
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms): In order
+	to name preloaded symbols correctly for the lookup algorithm
+	to work when the loaded module file must be prefixed with lib.
+	Use global_symbol_to_c_name_address_lib_prefix when
+	need_lib_prefix is other than no.
+	* tests/need_lib_prefix.at: New test to check for breakage on
+	hosts where need_lib_prefix is unknown.
+	* Makefile.am (TESTSUITE_AT): Add new test.
+	* tests/TODO: Note missing tests that would have caught some
+	of the latent bugs fixed by this patch.
+	* HACKING: Document libltdl keyword.
+	* NEWS: Updated.
+
+2007-06-24  Gary V. Vaughan  <gary@gnu.org>
+
+	Reenable compilation of libltdl with C++:
+
+	* libltdl/ltdl.c (tryall_dlopen): Rename the try variable to
+	attempt, and cast explicitly.
+	(advise_dup): Add explicit cast.
+
+2007-06-22  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/config/ltmain.m4sh (version-number) [irix]: Don't subtract
+	1 from major as it may be less than age.
+
+2007-06-21  Noah Misch  <noah@cs.caltech.edu>
+
+	* tests/f77demo/configure.ac [--with-dist]: New option.  Skip most
+	Fortran checks when given.
+	* tests/fcdemo/configure.ac [--with-dist]: Likewise.
+	* Makefile.am (@DIST_MAKEFILE_LIST@): Pass --with-dist.
+	Reported by Benoit Sigoure <tsuna@lrde.epita.fr>.
+
+2007-06-19  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* AUTHORS: Add myself.
+
+2007-06-18  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/config/ltmain.m4sh: Add new magic variable
+	for use with cwrapper.
+	(func_ltwrapper_script_p): New function.
+	(func_ltwrapper_executable_p): New function.
+	(func_ltwrapper_scriptname): New function.
+	(func_ltwrapper_p): Accomodate both wrapper scripts and
+	wrapper executables.
+	(func_mode_execute): Handle $file that is a wrapper
+	script and $file that is a wrapper executable differently.
+	(func_mode_install) [cygwin|mingw]: If $file is a wrapper
+	executable, use func_ltwrapper_scriptname to determine
+	wrapper script name. Afterwards, always use
+	func_ltwrapper_script_p instead of func_ltwrapper_p.
+	(func_emit_libtool_wrapper_script): Rename to...
+	(func_emit_wrapper): ...this. All callers changed.
+	(func_emit_libtool_cwrapperexe_source): Rename to...
+	(func_emit_cwrapperexe_src): ...this. All callers changed.
+	Embed new magic_exe variable into source. Private transient
+	wrapper script now called foo_ltshwrapperTMP, not
+	foo_ltshwrapper.
+	(func_emit_cwrapperexe_src) [main, mingw]: Use _spawnv
+	and return child's exit code manually rather than rely on
+	broken execv.
+	(func_mode_link) [cygwin|mingw]: Don't call dirname and
+	basename directly; use func_dirname and func_basename
+	when computing cwrapper names.  Use cwrapper to generate
+	wrapper script, and use pathname returned by
+	func_ltwrapper_scriptname instead of $output.
+	(func_mode_link) [NOT cygwin|mingw]: move wrapper script
+	generation for non-win32 inside case statement, as default
+	case.
+	(func_mode_uninstall) [$name's extension != .lo|.la]:
+	'clean' mode must handle $file differently if it is a libtool
+	wrapper script, or if it is a libtool wrapper executable.
+	* tests/destdir.at [Simple DESTDIR install]: $EXEEXT fixups.
+	* tests/destdir.at [DESTDIR with in-package deplibs]: Ditto.
+
+2007-06-17  Noah Misch  <noah@cs.caltech.edu>
+
+	* AUTHORS: Add myself.
+
+2007-06-17  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN): add quotes to
+	the test -n.
+
+2007-06-17  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN): ensure stderr
+	is redirected even when getconf does not exist.
+
+2007-06-09  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/config/ltmain.m4sh (func_emit_libtool_wrapper_script):
+	Take an argument to specify value assigned to
+	WRAPPER_SCRIPT_BELONGS_IN_OBJDIR in the emitted
+	script.
+	(func_emit_libtool_cwrapperexe_source) [file scope]:
+	define permission flags S_IXGRP and S_IXOTH if not
+	already defined.
+	(func_emit_libtool_cwrapperexe_source) [LTWRAPPER_DEBUGPRINTF]:
+	Use C89-compatible syntax to mimic variadic macros.
+	Adjust all callers.
+	(func_emit_libtool_cwrapperexe_source) [check_executable]:
+	avoid embedded #ifdefs; use S_IXGRP and S_IXOTH
+	unconditionally.
+	(func_emit_libtool_cwrapperexe_source) [make_executable]:
+	ditto.
+	(func_emit_libtool_cwrapperexe_source): don't rewrite
+	WRAPPER_SCRIPT_BELONGS_IN_OBJDIR posthoc; instead pass
+	correct argument when calling func_emit_libtool_wrapper_script.
+	(func_mode_link): pass correct argument when calling
+	func_emit_libtool_wrapper_script.
+
+2007-06-07  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/config/ltmain.m4sh (func_emit_libtool_cwrapperexe_source):
+	ensure that generated source follows GCS as nearly as
+	possible.
+
+2007-06-07  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/config/ltmain.m4sh (func_emit_libtool_wrapper_script):
+	add code block to handle cases when wrapper script is in $objdir.
+	(func_emit_libtool_cwrapperexe_source): replace DEBUG() macro
+	with namespace-safe LTWRAPPER_DEBUGPRINTF(). Call
+	func_emit_libtool_wrapper_script() with appropriate filters to
+	embed script text in C char* static variable.
+	(f_e_l_c_s: main): add new option --lt-dump-script, parse argv[]
+	for it, and take appropriate action.  Call chase_symlinks()
+	on argv[0], in case this.exe was launched via one.  Use chased
+	value to determine full absolute pathname of wrapper script, in
+	$objdir. Unconditionally write script out to this pathname and
+	set permission bits.  Remove extraneous ';' from debugging loop.
+	(f_e_l_c_s: main) [mingw]: DOS-ize $SHELL before populating
+	newargv[0]; if $TARGETSHELL environment variable is set, use
+	it instead of $SHELL and do not DOS-ize.  Ensure newargv[1]
+	(wrapper script absolute path) uses only '/', not '\'.  Make
+	sure to call execv() with DOS-ized $SHELL (or un-DOS-ized
+	$TARGETSHELL, if set)
+	(f_e_l_c_s: make_executable): new function
+	(f_e_l_c_s: chase_symlinks): new function (no-op if !S_ISLNK)
+
+2007-06-03  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 (old_archive_cmds): Remove
+	old_deplibs.
+	* tests/archive-in-archive.at: Check for archives as members
+	of static archives. Currently XFAILS, above only eliminates
+	one of the two static archives.
+	* Makefile.am: Add test.
+	Reported by Daniel Macks <dmacks@netspace.org>
+
+2007-06-01  Steve Ellcey  <sje@cup.hp.com>
+
+	* libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN): Try using getconf
+	to set lt_cv_sys_max_cmd_len.
+
+2007-05-28  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link),
+	libltdl/m4/libtool.m4 [darwin]: Only use ${wl} in verstring
+	with xlc.
+
+2007-05-22  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/lt_dladvise.at:  Use the lib prefix throughout for
+	better portability - testing whether modules build and load
+	without that prefix is not the domain of this test.
+	Also, only run the test of the global hint with the depend
+	module on hosts that can compile a module without passing
+	-no-undefined in link mode.
+
+2007-05-10  Noah Misch  <noah@cs.caltech.edu>
+
+	* tests/duplicate_deps.at: Make the XFAIL unconditional, but
+	skip the test if the test link would succeed even without
+	--preserve-dup-deps.
+
+	* libltdl/config/general.m4sh (func_echo): Use $* instead of
+	${1+"$@"}.
+
+2007-05-09  Eric Blake  <ebb9@byu.net>
+
+	* libltdl/libltdl/lt_error.h (LT_ERROR_LEN_MAX): Adjust, to fix
+	buffer overflow in previous patch.
+
+2007-05-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/lt_dladvise.at: Commit missing file from below.
+
+2007-05-08  Gary V. Vaughan  <gary@gnu.org>
+
+	Without this patch, lt_dlopen always opens modules with symbol
+	visibility set according to the underlying implementation.
+	Here, we add lt_dlopenadvise() to allow callers to request,
+	among other things, local or global symbol visibility from the
+	underlying dlloader:
+
+	* libltdl/ltdl.c (LT_DLRESIDENT_FLAG): Removed.
+	(LT_DLIS_RESIDENT): Use public is_resident info field.
+	(LT_DLIS_SYMLOCAL, LT_DLIS_SYMGLOBAL): New macros to test for
+	module symbol visibility status.
+	(tryall_dlopen): If vtable->module_open() was able to act on
+	either is_symlocal or is_symglobal hints, store that in
+	the handle flags.
+	(lt_dlopenadvise): New function that works like lt_dlopen(),
+	but accepts an advise type to determine whether to ask
+	dlloaders to change default symbol visibility.
+	(lt_dlopen, lt_dlopenext): Just call lt_dlopenadvise() with
+	the correct parameters.
+	(lt_dladvise_init, lt_dladvise_destroy): New functions to
+	initialize and destroy an advise type hint.
+	(lt_dladvise_ext, lt_dladvise_resident, lt_dladvise_local)
+	(lt_dladvise_global): Set hints on an advise type.
+	(openadvise): Factored out of lt_dlopenadvise.
+	(has_library_ext): Factored out of lt_dlopenadvise.
+	* libltdl/ltdl.h: Declare all of the above.
+	(lt_dlinfo): New fields for advise hints.
+	* libltdl/libltdl/lt_dlloader.h (lt_module_open): Add a new
+	advise parameter.  Adjust all callers.
+	(lt_dladvise): New opaque type for advise hints.
+	* libltdl/libltdl/lt__private.h (lt__advise): Declare
+	contents of opaque lt_dladvise type.
+	* libltdl/libltdl/lt_error.h (CONFLICTING_FLAGS): New error
+	for attempts to have local and global symbol visibility at the
+	same time.
+	* libltdl/loaders/dld_link.c, libltdl/loaders/dyld.c,
+	libltdl/loaders/load_add_on.c, libltdl/loaders/loadlibrary.c,
+	libltdl/loaders/preopen.c, libltdl/loaders/shl_load.c: Adjust.
+	* libltdl/loaders/dlopen.c (RTLD_LOCAL, RTLD_GLOBAL): Try to
+	define these symbols if the system has equivalents.
+	(vmopen): If unable to act on a caller request to set symbol
+	visibility, then unset the relevant hints in the advise type.
+	* tests/lt_dladvise.at: New tests for the above.
+	* doc/libtool.texi (Libltdl Interface): Updated.
+	* NEWS: Updated.
+
+2007-05-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): When adding
+	new_inherited_linker_flags to compiler_flags, remember to
+	translate .ltframework back.  Fixes bug introduced 2007-04-23.
+	* THANKS: Update.
+	* tests/inherited_flags.at: Amend test.
+	Report by Christoph Egger.
+
+2007-05-03  Reuben Thomas  <rrt@sc3d.org>  (tiny change)
+
+	* doc/libtool.texi (Libltdl interface): Fix typo.
+
+2007-05-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am (clean-ltmain-sh): Removed.
+	(libtool, $(srcdir)/$(m4dir)/ltversion.m4)
+	($(srcdir)/$(auxdir)/ltmain.sh): Updated to not depend on any
+	phony rules.  Test `$?' for prerequisites that should always
+	cause us to update the target.  Fixes rebuilding rules, at the
+	cost of sometimes updating too much with non-GNU make.
+
+2007-04-27  Noah Misch  <noah@cs.caltech.edu>
+
+	* tests/ctor.at: New file.
+	* Makefile.am (TESTSUITE_AT): Add tests/ctor.at.
+
+2007-04-27  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/libltdl/lt__glibc.h: Use !HAVE_WORKING_ARGZ
+	instead of SYSTEM_ARGZ_IS_BROKEN.
+	* libltdl/m4/argz.m4 (gl_FUNC_ARGZ): Ditto.  Also, minor
+	stylistic improvements.
+	Report by Bruno Haible <bruno@clisp.org>.
+
+2007-04-25  Charles Wilson  <libtool@cwilson.fastmail.fm>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/argz_.h: ensure error_t definition is obtained
+	in same mechanism system argz.h would have.
+	* libltdl/libltdl/lt__glibc.h: also detect if
+	SYSTEM_ARGZ_IS_BROKEN when determining whether to re#def
+	argz* functions.
+	* libltdl/m4/argz.m4 (gl_FUNC_ARGZ): add new test to check
+	if $host's argz facilities are known bad.  Err on the side
+	of caution if cross-compiling.
+
+2007-04-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* README, README.alpha: Document how to test an arbitrary
+	installed libtool script.
+
+2007-04-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/cmdline_wrap.at: Avoid `AT_CAPTURE_FILE' if it not
+	defined (Autoconf < 2.60).
+	* tests/shlibpath.at: Add `libtool' keyword.
+
+	* tests/indirect_deps.at: New file, with tests to ensure
+	`link_all_deplibs=no' does not break functionality.
+	* Makefile.am: Adjust.
+
+2007-04-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Fix accumulation
+	of `inherited_linker_flags' entries from multiple deplibs, by
+	adding $new_inherited_linker_flags only once, only in link pass.
+	* tests/inherited_flags: Amend test to expose this.
+	* NEWS: Adjust: kill one regression, but add note about the
+	feature new in 1.9b.
+	Report by Jeff Squyres and others.
+
+2007-04-23  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): move wrapper
+	script generation from here...
+	(func_emit_libtool_wrapper_script): to this new function, and
+	write to stdout
+	(func_mode_link): move cwrapper source code generation from
+	here...
+	(func_emit_libtool_cwrapperexe_source): to this new function,
+	and write to stdout
+	(func_mode_link): call the two new functions and redirect
+	output to appropriate file.
+
+2007-04-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link) <-no-install>
+	[ darwin ]: Treat like `-no-fast-install', as we cannot
+	hardcode.  Report by Simon Josefsson.
+
+2007-04-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Link mode) <-no-install>: Mention that this
+	still generates a wrapper script on systems without hardcoding.
+	* tests/stresstest.at: Test `-no-install'.
+	* THANKS: Update.
+	Report by Simon Josefsson.
+
+2007-03-30   Matthieu Herrb  <matthieu.herrb@laas.fr>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[ openbsd ]: Add an explicit check for shared libraries support.
+
+2007-03-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* Makefile.am ($(srcdir)/$(m4dir)/ltversion.m4): Fix quoting
+	error.
+
+2007-03-28  Gary V. Vaughan  <gary@gnu.org>
+
+	* HACKING (Abstraction layers in libltdl): Rewritten somewhat
+	for (hopefully) better clarity.
+
+2007-03-26  Gary V. Vaughan  <gary@gnu.org>
+
+	The stamp-vcl file rules caused non-gnu make programs to rerun
+	parts of the configuration process on each invocation.  Instead
+	of relying on a stamp file, we now compare version numbers of
+	generated files with the ChangeLog timestamp manually in the
+	affected make rules to decide whether regenerating is necessary:
+
+	* Makefile.am (EXTRA_DIST): Remove stamp-vcl.
+	(clean-ltmain-sh): Also remove users' obsolescent stamp-vcl.
+	(rebuild): Keep some common code here for...
+	(libtool, libltdl/m4/ltversion.m4, libltdl/config/ltmain.sh):
+	Rewritten to work without reference to intermediate stamp-vcl
+	file.
+	* configure.ac (CONFIG_STATUS_DEPENDENCIES): Change from
+	stamp-vcl to ChangeLog.
+	* NEWS: Removed entry saying this fix is needed.
+
+2007-03-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* HACKING (LGPL with Libtool exception clause): Typo.
+	Reported by Tim Van Holder  <tim.van.holder@telenet.be>
+
+	* HACKING (Licensing Rules): Explain the various license texts
+	used for files distributed with Libtool, and update license text
+	to match.
+	* Makefile.am, Makefile.maint README, README.alpha, THANKS, TODO,
+	bootstrap, clcommit.m4sh, configure.ac, libltdl/Makefile.inc,
+	libltdl/README, libltdl/argz.c, libltdl/argz_.h,
+	libltdl/config/general.m4sh, libltdl/config/getopt.m4sh,
+	libltdl/config/ltmain.m4sh, libltdl/config/mailnotify.m4sh,
+	libltdl/config/mkstamp, libltdl/configure.ac,
+	libltdl/libltdl/lt__alloc.h, libltdl/libltdl/lt__dirent.h,
+	libltdl/libltdl/lt__glibc.h, libltdl/libltdl/lt__private.h,
+	libltdl/libltdl/lt__strl.h, libltdl/libltdl/lt_dlloader.h,
+	libltdl/libltdl/lt_error.h, libltdl/libltdl/lt_system.h,
+	libltdl/libltdl/slist.h, libltdl/loaders/dld_link.c,
+	libltdl/loaders/dlopen.c, libltdl/loaders/dyld.c,
+	libltdl/loaders/load_add_on.c, libltdl/loaders/loadlibrary.c,
+	libltdl/loaders/preopen.c, libltdl/loaders/shl_load.c,
+	libltdl/lt__alloc.c, libltdl/lt__dirent.c, libltdl/lt__strl.c,
+	libltdl/lt_dlloader.c, libltdl/lt_error.c, libltdl/ltdl.c,
+	libltdl/ltdl.h, libltdl/m4/argz.m4, libltdl/m4/libtool.m4,
+	libltdl/m4/ltdl.m4, libltdl/m4/ltoptions.m4,
+	libltdl/m4/ltsugar.m4, libltdl/m4/ltversion.in,
+	libltdl/m4/ltversion.m4, libltdl/m4/lt~obsolete.m4,
+	libltdl/slist.c, libtoolize.m4sh, tests/am-subdir.at,
+	tests/cdemo-conf.test, tests/cdemo-exec.test,
+	tests/cdemo-make.test, tests/cdemo-shared.test,
+	tests/cdemo-static.test, tests/cdemo-undef.test,
+	tests/cdemo/Makefile.am, tests/cdemo/configure.ac,
+	tests/cdemo/foo.c, tests/cdemo/foo.h, tests/cdemo/main.c,
+	tests/cmdline_wrap.at, tests/convenience.at, tests/defs.m4sh,
+	tests/demo-conf.test, tests/demo-deplibs.test,
+	tests/demo-exec.test, tests/demo-hardcode.test,
+	tests/demo-inst.test, tests/demo-make.test,
+	tests/demo-nofast.test, tests/demo-noinst-link.test,
+	tests/demo-nopic.test, tests/demo-pic.test,
+	tests/demo-relink.test, tests/demo-shared.test,
+	tests/demo-static.test, tests/demo-unst.test,
+	tests/demo/Makefile.am, tests/demo/configure.ac,
+	tests/demo/dlmain.c, tests/demo/foo.c,
+	tests/demo/foo.h, tests/demo/hell1.c, tests/demo/hell2.c,
+	tests/demo/hello.c, tests/demo/main.c,
+	tests/depdemo-conf.test, tests/depdemo-exec.test,
+	tests/depdemo-inst.test, tests/depdemo-make.test,
+	tests/depdemo-nofast.test, tests/depdemo-relink.test,
+	tests/depdemo-shared.test, tests/depdemo-static.test,
+	tests/depdemo-unst.test, tests/depdemo/Makefile.am,
+	tests/depdemo/configure.ac, tests/depdemo/l1/Makefile.am,
+	tests/depdemo/l1/l1.c, tests/depdemo/l1/l1.h,
+	tests/depdemo/l2/Makefile.am, tests/depdemo/l2/l2.c,
+	tests/depdemo/l2/l2.h, tests/depdemo/l3/Makefile.am,
+	tests/depdemo/l3/l3.c, tests/depdemo/l3/l3.h,
+	tests/depdemo/l4/Makefile.am, tests/depdemo/l4/l4.c,
+	tests/depdemo/l4/l4.h, tests/depdemo/main.c,
+	tests/depdemo/sysdep.h, tests/deplibs-ident.at,
+	tests/destdir.at, tests/duplicate_conv.at,
+	tests/duplicate_deps.at, tests/duplicate_members.at,
+	tests/early-libtool.at, tests/export.at,
+	tests/f77demo-conf.test, tests/f77demo-exec.test,
+	tests/f77demo-make.test, tests/f77demo-shared.test,
+	tests/f77demo-static.test, tests/f77demo/Makefile.am,
+	tests/f77demo/configure.ac, tests/f77demo/cprogram.c,
+	tests/f77demo/foo.h, tests/f77demo/fooc.c,
+	tests/fail.at, tests/fcdemo-conf.test, tests/fcdemo-exec.test,
+	tests/fcdemo-make.test, tests/fcdemo-shared.test,
+	tests/fcdemo-static.test, tests/fcdemo/Makefile.am,
+	tests/fcdemo/configure.ac, tests/fcdemo/cprogram.c,
+	tests/fcdemo/foo.h, tests/fcdemo/fooc.c,
+	tests/inherited_flags.at, tests/libtoolize.at,
+	tests/link-2.test, tests/link-order.at, tests/link-order2.at,
+	tests/link.test, tests/lt_dlexit.at, tests/mdemo-conf.test,
+	tests/mdemo-dryrun.test, tests/mdemo-exec.test,
+	tests/mdemo-inst.test, tests/mdemo-make.test,
+	tests/mdemo-shared.test, tests/mdemo-static.test,
+	tests/mdemo-unst.test, tests/mdemo/Makefile.am,
+	tests/mdemo/configure.ac, tests/mdemo/foo.h, tests/mdemo/foo1.c,
+	tests/mdemo/foo2.c, tests/mdemo/main.c, tests/mdemo/mlib.c,
+	tests/mdemo/sub.c, tests/mdemo2-conf.test,
+	tests/mdemo2-exec.test, tests/mdemo2-make.test,
+	tests/mdemo2/Makefile.am, tests/mdemo2/configure.ac,
+	tests/mdemo2/main.c, tests/nomode.test, tests/nonrecursive.at,
+	tests/objectlist.test, tests/old-m4-iface.at,
+	tests/pdemo-conf.test, tests/pdemo-exec.test,
+	tests/pdemo-inst.test, tests/pdemo-make.test,
+	tests/pdemo/Makefile.am, tests/pdemo/configure.ac,
+	tests/pdemo/foo.h, tests/pdemo/longer_file_name_dlmain.c,
+	tests/pdemo/longer_file_name_foo.c,
+	tests/pdemo/longer_file_name_foo2.c,
+	tests/pdemo/longer_file_name_hell1.c,
+	tests/pdemo/longer_file_name_hell2.c,
+	tests/pdemo/longer_file_name_hello.c,
+	tests/pdemo/longer_file_name_main.c, tests/quote.test,
+	tests/recursive.at, tests/search-path.at, tests/sh.test,
+	tests/shlibpath.at, tests/standalone.at, tests/static.at,
+	tests/stresstest.at, tests/subproject.at, tests/suffix.test,
+	tests/tagdemo-conf.test, tests/tagdemo-exec.test,
+	tests/tagdemo-make.test, tests/tagdemo-shared.test,
+	tests/tagdemo-static.test, tests/tagdemo-undef.test,
+	tests/tagdemo/Makefile.am, tests/tagdemo/baz.cpp,
+	tests/tagdemo/baz.h, tests/tagdemo/configure.ac,
+	tests/tagdemo/conv.cpp, tests/tagdemo/conv.h,
+	tests/tagdemo/foo.cpp, tests/tagdemo/foo.h,
+	tests/tagdemo/main.cpp, tests/tagtrace.test,
+	tests/template.at, tests/testsuite.at: Apply correct license
+	text according to the new rules set out in HACKING.
+
+2007-03-19  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh: Handle argz.m4 specially like ltdl.m4, so
+	that it isn't copied unless libltdl is being used.  Copy other
+	macro files according to their tagged serial numbers.
+	* tests/libtoolize.at: Adjust.
+
+2007-03-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/mdemo/Makefile.am (libmlib_la_LDFLAGS): Add
+	`-export-symbols-regex ".*"' because the convenience libltdl
+	uses export markers and thus turns off autoexport on w32.  Fixes
+	test failures for Cygwin and MinGW.
+	Bug analysis by Charles Wilson.
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG, _LT_SYS_HIDDEN_LIBDEPS) [ interix ]: When
+	matching for interix, accept version range [3-9] instead of 3.
+	* NEWS: Update.
+	Report by Martin Koeppe <mkoeppe@gmx.de>.
+
+	* libltdl/m4/libtool.m4 (LT_PROG_GCJ): Avoid M4 expansion error
+	that caused `dnl' to be merged to the previous word.
+	* THANKS: Update.
+	Report by Steve Ellcey.
+
+2007-03-09  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh: Replace literal tab chars in help comment
+	with spaces to align columns in --help output.
+
+2007-03-06  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Also apply the
+	symbol filtering for w32 and the include_expsyms feature in the
+	case of exceeded command line length.  Fixes test failure on
+	MinGW.
+
+	* tests/stresstest.at: For const data object imported from
+	shared library, define appropriate macros to expand
+	__declspec(dllimport) on w32.  Use two different main objects
+	and pick the right one for the link flags we are about to test.
+	Fixes test failure on MinGW.
+
+	* tests/export.at: For const data object imported from shared
+	library, define appropriate macros to expand
+	__declspec(dllimport) on w32.  Fixes test failure on MinGW.
+
+2007-03-05  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_check_macros): Display m4 quotes correctly
+	in AC_CONFIG_MACRO_DIR diagnostics.
+
+	* libltdl/config/general.m4sh (M4SH_VERBATIM): New macro to
+	simplify m4sh quote quoting in blocks of raw shell code.
+	* clcommit.m4sh, libtoolize.m4sh, libltdl/config/getopt.m4sh,
+	libltdl/config/ltmain.m4sh, libltdl/config/mailnotify.m4sh,
+	tests/defs.m4sh: Use it.
+	* HACKING (Editing `.m4sh' Files): Mention M4SH_VERBATIM Macro.
+
+2007-02-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/lt_dlexit.at: Allow test to pass on static-only systems
+	and with disable-shared.
+
+	* NEWS: Rewrite all news since 1.9f and put in categories,
+	update.
+
+	* libltdl/Makefile.inc: Fix the file description, so that it
+	matches recursive and nonrecursive libltdl setup.
+	* Makefile.am ($(srcdir)/libltdl/Makefile.am): Do not depend
+	upon the exact text of the copyright header, just copy until
+	the marker line.  Remove the marker lines in the output, and
+	adjust the description for subpackage setup.
+
+2007-02-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am ($(srcdir)/libltdl/Makefile.am): Fix regexp typo.
+
+	* clcommit.m4sh: Look in the right directory for helper scripts.
+
+2007-02-25  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am ($(srcdir)/libltdl/Makefile.am): Fixup regex to
+	match Copyright notice change below.
+
+	* HACKING, Makefile.am, Makefile.maint, bootstrap,
+	libltdl/Makefile.am, libltdl/Makefile.inc, libltdl/m4/libtool.m4,
+	ltmain.c, tests/cdemo/Makefile.am, tests/demo/Makefile.am,
+	tests/depdemo/Makefile.am, tests/depdemo/l1/Makefile.am,
+	tests/depdemo/l2/Makefile.am, tests/depdemo/l3/Makefile.am,
+	tests/depdemo/l4/Makefile.am, tests/f77demo/Makefile.am,
+	tests/fcdemo/Makefile.am, tests/libtoolize.at,
+	tests/mdemo/Makefile.am, tests/mdemo2/Makefile.am,
+	tests/pdemo/Makefile.am, tests/tagdemo/Makefile.am: Update
+	Copyright notice text to include URL for canonical GPL document.
+
+2007-02-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/static.at: Forgot to fix PATH for the first
+	func_test_exec invocation.  So factor out into new functions
+	func_fix_path and func_restore_path and use those.
+
+	* README: Document the need for GNU make to build Libtool.
+	Point the user to the doc/notes.txt file.  In the examples, use
+	`gmake' throughout to make it more obvious.  Explain simpler way
+	to run both testsuites and either one.  Referring to individual
+	tests needs the `tests/' prefix.
+	* README.alpha: Likewise.
+	* doc/notes.texi: Likewise, document need for GNU make.
+	Comment out the FreeBSD make issue for now.
+
+	* tests/static.at: Larger rewrite to make work on w32: Use three
+	different prefixes instead of three libdirs, so the moving of
+	the DLLs works as expected.  Adjust all code.  Since now
+	$libdirI/../bin is distinct from the directory of the installed
+	program, take care than on w32 PATH contains the needed bindirs,
+	in appropriate order.
+	Report by Charles Wilson.
+
+	* Makefile.am (INSTALLCHECK_ENVIRONMENT): Point LTDLINCL and
+	LIBLTDL to installed libltdl, so that it is being used by
+	the lt_dlexit test.
+
+2007-02-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Install mode, libtool script contents):
+	Describe current and system-specific DESTDIR limitations.
+	* tests/destdir.at: XFAIL if `fast_install' is no.
+
+	* doc/libtool.texi (LT_INIT): Fix typo.
+
+	* doc/libtool.texi (Libtool test suite): Mention the new
+	testsuite.  Point to README rather than INSTALL for testing
+	instructions.
+	(Test descriptions): Fix more file names.  Also mention
+	cdemo-undef.test, mdemo2-conf.test, mdemo2-exec.test,
+	mdemo2-make.test, objectlist.test, pdemo-conf.test,
+	pdemo-exec.test, pdemo-inst.test, pdemo-make.test,
+	tagdemo-conf.test, tagdemo-exec.test, tagdemo-make.test,
+	tagdemo-static.test, tagdemo-shared.test, tagdemo-undef.test,
+	f77demo-conf.test, f77demo-exec.test, f77demo-make.test,
+	f77demo-static.test, f77demo-shared.test, fcdemo-conf.test,
+	fcdemo-exec.test, fcdemo-make.test, fcdemo-static.test,
+	fcdemo-shared.test.  Describe what they do.
+	(When tests fail, Troubleshooting): Mention how to pass options
+	to the new test suite.
+	* tests/tagdemo/README: Fix description.
+
+	* bootstrap: Also set GREP, FGREP, EGREP, LN_S, when creating a
+	preliminary ltmain.sh script.
+
+	* doc/libtool.texi (Test descriptions): Track the grand test
+	suite renaming from 2003-10-14 in the tests documentation.
+	assign.test is merged into sh.test.  Fix description of sh.test.
+	* tests/sh.test: Likewise.
+
+	* doc/libtool.texi (LT_INIT): Fix wording of intro a bit.
+	<shared, static>: Also describe these default LT_INIT options.
+	<AC_LIBTOOL_DLOPEN, AC_LIBTOOL_WIN32_DLL>
+	<AC_DISABLE_FAST_INSTALL>: Mention deprecated macro names,
+	including the respective LT_INIT replacement.
+	<AC_DISABLE_SHARED, AC_DISABLE_STATIC, AC_ENABLE_SHARED>
+	<AC_ENABLE_STATIC>: Document, un-deprecate.  Suggest the
+	respective LT_INIT replacement.
+	<AM_DISABLE_SHARED, AM_DISABLE_STATIC, AM_ENABLE_SHARED>
+	<AM_ENABLE_STATIC>: Document deprecated aliases.
+	(Distributing libltdl) <AC_WITH_LTDL, AC_LIBLTDL_INSTALLABLE>
+	<AC_LIBLTDL_CONVENIENCE>: Document deprecated aliases.
+	* libltdl/m4/ltoptions.m4 (AM_ENABLE_SHARED, AM_DISABLE_SHARED)
+	(AM_ENABLE_STATIC, AM_DISABLE_STATIC): Make these AU_ALIASes of
+	the respective AC_* macros, so we do not recommend LT_INIT(*) in
+	this case.
+	(AC_ENABLE_SHARED, AC_DISABLE_SHARED, AC_ENABLE_STATIC)
+	(AC_DISABLE_STATIC): Un-deprecate these.  Remove now-superfluous
+	aclocal-1.4 backwards compatibility comments.
+
+	* tests/link-order2.at: Rewrite completely.  Do not use `sin'
+	from the math library, there are too many problems with this.
+	Instead, use a self-written library, install it without the
+	Libtool library file, to emulate a native library in a system
+	directory, and adjust $shlibpat_var.  Try overriding its symbol.
+	Further, also try an installed `wrong' binary.
+	Avoid failing test bits on AIX without runtimelinking and on
+	Darwin in some cases, SKIP at the end in this case.
+	Analysis by Peter O'Gorman.
+
+	* doc/notes.texi: Mention MACOSX_DEPLOYMENT_TARGET issue.
+	* tests/template.at: Only skip those tests failing on Darwin
+	if `-flat_namespace' is used by libtool.  In that case, SKIP
+	at the end.  Analysis by Peter O'Gorman.
+
+2007-02-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix -export-symbols and -export-symbols-regex for links that
+	exceed the command line length and use convenience archives.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Avoid grepping a
+	nonexistent file if using reloadable objects.  Do not create a
+	linker script nor a linker input file if no objects are passed.
+	Apply export_symbols_regex in case the command line length is
+	exceeded.
+	Report by Bob Friesenhahn.
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS)
+	<compiler_needs_object>: New tag variable.  Default to `no'.
+	(_LT_LINKER_SHLIBS) [ linux ]: Set it to yes for Sun C 5.9.
+	(_LT_LANG_CXX_CONFIG): Also default it to `no'.
+	[ linux ]: Set it to `yes' for Sun C++ 5.9.
+	* libltdl/config/ltmain.m4sh (func_mode_link): If we link
+	no objects but only convenience archives into a library,
+	force expansion if `compiler_needs_object' is yes.
+	For creating a linker input filelist due to long cmdline,
+	extract the first object if `compiler_needs_object' is yes.
+	* doc/libtool.texi (libtool script contents): Document it.
+	Fixes test failures of Sun compilers on GNU/Linux.
+	Report by Terry D. Dontje.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Avoid setting
+	`$libobjs' to a single space; set it to empty in that case.
+
+2007-02-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms) [ osf5 ]:
+	On Tru64 5.1, const relocations do not work well.  Omit the
+	const here.  Fixes failure of demo-make after demo-shared with
+	link editor error `seg_info_ptr: Couldnt find a seg type 2'.
+
+	* Makefile.am (doc_libtool_TEXINFOS): Renamed from...
+	(libtool_TEXINFOS): ...this, to fix dependencies.  Omit from
+	EXTRA_DIST.
+	(check-local): Also depend upon $(bin_SCRIPTS).
+
+2007-02-23  Ralf Menzel  <menzel@ls6.cs.uni-dortmund.de>  (tiny change)
+
+	* libltdl/config/general.m4sh (sed_double_backslash): Fix
+	hacky sed script to avoid limitations but retain portability to
+	Solaris /bin/sed.  Remove old obsolete cruft.
+
+2007-02-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Fix the check for
+	convenience archives when warning about linking against static
+	libraries: test against $deplib rather than empty $lib.
+
+2007-02-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltdl.m4 (LT_WITH_LTDL): Fix detection of new enough
+	libltdl by actually checking for the declaration of
+	lt_dlinterface_register in ltdl.h with AC_CHECK_DECL.
+	Remove redundant configure output line.
+
+	* tests/template.at: Reformat, add M4 quoting.  Use $LDFLAGS
+	consistently for link mode.
+
+2007-02-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/static.at: Use the right names for the broken libs.
+
+2007-02-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/deplibs-ident.at [aix, hppa*-*-hpux*, interix, openbsd]:
+	Do not XFAIL, on these systems we happen to pass.
+	* tests/duplicate_deps.at [aix]: Likewise.
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [ linux |
+	k*bsd*-gnu ]: Fix eval quoting in the DT_RUNPATH test.
+
+	* HACKING: Update.
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [ linux ]
+	<whole_archive_flag_spec>: For Sun C/C++ 5.9, do not add
+	/dev/null as dummy object, it fails with GNU ld version
+	2.16.91.0.7-amd-sles9.  Report by Terry D. Dontje.
+	* THANKS: Update.
+
+2007-02-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [ osf4, osf5 ]
+	<archive_expsym_cmds>: Use `${wl}-input' not `-input', for
+	cc.  Could use `-input_to_ld'.
+	(_LT_LANG_CXX_CONFIG) [ osf4, osf5 ] <archive_expsym_cmds>:
+	Use `${wl}' instead of `-Wl,', for consistency.
+
+2007-02-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix spurious testsuite failures on AIX due on NFS mounts due to
+	shared library images that cannot be removed without `slibclean'
+	which needs superuser privileges.
+
+	* tests/testsuite.at (PREPARE_TESTS): Define $mkdir_p globally.
+	(LT_AT_MVDIR): New macro to emulate `mv dir dest'.
+	* tests/destdir.at: Use LT_AT_MVDIR.
+	* tests/shlibpath.at: Likewise.
+	* tests/static.at: Likewise.
+
+2007-02-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/export.at: Exporting is not fully functional with
+	-retain-symbols-file.  Do not test for failure to link `broken'
+	in this case.  At the end of the test, SKIP if we are not fully
+	functional.
+
+	* tests/lt_dlexit.at: Add casts and `extern "C"' to let the test
+	pass with a C++ compiler.
+
+	* libltdl/config/ltmain.m4sh: Remove duplicate marker for
+	generated shell functions.
+
+	* tests/testsuite.at (LT_AT_NOINST_EXEC_CHECK): New macro, like
+	LT_AT_EXEC_CHECK but uses `$LIBTOOL --mode=execute' and allows
+	to pass `-dlopen MODULE' arguments.
+	* tests/lt_dlexit.at: Use it.  Also, do not test `-dlpreopen',
+	that currently needs library names to begin with `lib'.
+
+2007-02-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/export.at: New test: expose -export-symbols failure
+	when the input consists solely of convenience archives, and
+	failure to not export all symbols when the command line length
+	is exceeded.
+	* Makefile.am: Adjust.
+
+	* libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): New substituted
+	function `func_lo2o', saving two fork&exec with XSI shells.
+	* libltdl/config/ltmain.m4sh (func_mode_compile)
+	(func_mode_install, func_mode_link): Use it for rewrites of
+	single files.
+
+	* libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): New function
+	func_opt_split, for XSI and portable shell.
+	* libltdl/config/ltmain.m4sh: Move the insertion point for the
+	configure-generated shell functions to before the first option
+	parsing loop.  Rewrite the separation of the long options to use
+	func_opt_split.
+
+2007-02-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Eliminate roughly a third of the script execution time overhead
+	for all modes except for link/relink and uninstall/clean.
+
+	* libltdl/m4/libtool.m4 (_LT_CONFIG): Remove unused `TEST SUITE
+	MARKER', obsolete since 2005-04-17.
+	* libltdl/config/ltmain.m4sh: Likewise, several instances.
+	(Main): Tear apart, moving individual bits up as early in the
+	script as possible, to help the shell to avoid parsing the rest.
+
+2007-02-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi: Update copyright years.
+
+2007-02-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/general.m4sh (sed_double_backslash): Replace
+	POSIX sed script with a hack that treats up to 10 backslashes
+	in the input correctly and is portable to Solaris /bin/sed.
+
+2007-02-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/testsuite.at (LT_AT_TAG): Skip also if the compiler
+	variable is set to `no', not only if it is empty.
+
+2007-02-06  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/lt_dlexit.at: Do not compile main object with libtool.
+
+	* tests/cmdline_wrap.at: Pass $abs_top_srcdir and $abs_builddir
+	to inner testsuite.
+
+	* Makefile.am (TESTSUITE_AT): Move destdir.at after
+	search-path.at so the banners fit better.
+
+	* tests/convenience.at: Use $CPPFLAGS for compilation.
+	* tests/deplibs-ident.at: Likewise.
+	* tests/duplicate_members.at: Likewise.
+	* tests/inherited_flags.at: Likewise.
+	* tests/link-order.at: Likewise.
+	* tests/stresstest.at: Likewise.
+	* tests/early-libtool.at: Likewise.  Do not quote $CC.
+
+	* libltdl/ltdl.c (lt_dlexit): Add casts to fix compilation with
+	C++ compiler again.
+
+	* tests/destdir.at: Add `libtool' keyword to tests.
+
+2007-02-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_BOILERPLATE)
+	(_LT_LINKER_BOILERPLATE, _LT_SYS_MODULE_PATH_AIX)
+	(_LT_COMPILER_C_O): Require _LT_DECL_SED.
+	* THANKS: Update.
+	Report by Maciej W. Rozycki.
+
+2007-01-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/lt_dlexit.at: Use $abs_top_srcdir, not $top_srcdir,
+	in the new testsuite.
+
+2007-01-29  Samuel Thibault <samuel.thibault@ens-lyon.org>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [ gnu ]
+	<archive_expsym_cmds>: Behave like Linux, so that
+	--version-script is used for Hurd as well.
+
+2007-01-28  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* NEWS: Update for Cygwin changes.
+
+2007-01-28  Brian W. Barrett <bbarrett@lanl.gov>
+
+	* libltdl/config/ltmain.m4sh [darwin]: Use otool64 if otool fails.
+
+2007-01-28  Dave Brolley  <brolley@redhat.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/ltdl.c (lt_dlexit): Make sure that 'cur' is not NULL
+	before checking that it is still in the list.
+	* tests/lt_dlexit.at: New test.
+	* Makefile.am (TESTSUITE_AT): Adjust.
+	(check-local): Also depend on libltdl/libltdlc.la.
+	(check-recursive): Removed, unnecessary use of Automake
+	internals.
+
+2007-01-28  Mike Frysinger  <vapier@gentoo.org>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Pass through
+	`-p' and `-fprofile-*' for GCC.
+
+2007-01-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/libltdl/lt_system.h: Adjust copyright years.
+
+2007-01-28  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/libltdl/lt__private.h (LT_GLOBAL_DATA) [__CYGWIN__]:
+	Also define on Cygwin.
+	* libltdl/libltdl/lt_system.h (LT_SCOPE) [__CYGWIN__]: Likewise.
+
+2007-01-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [ cygwin, mingw ]
+	<export_symbols_cmds>: Avoid shell expansion of '/s/.*' through
+	double expansion, in case there is a 'S:' drive.
+	Report by Charles Wilson.
+
+2007-01-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Introduce a new test keyword `recursive' for tests that create a
+	modified `libtool' script and run the suite on this script.  All
+	tests with the keyword `libtool' are (by definition) suitable to
+	be used here.
+
+	* tests/cmdline_wrap.at: New test.
+	* Makefile.am: Adjust.
+	* tests/testsuite.at (LT_ESCAPE): New macro: clone of Autoconf
+	AS_ESCAPE that does not escape `$'.
+	(LT_AT_CHECK): New macro: print a command-to-be-run while
+	expanding parameters but nothing else.
+	* tests/stresstest.at: Use LT_AT_CHECK.  Create some files to
+	expose erroneous globbing errors with `-export-symbols-regex',
+	similar to those reported by Charles Wilson.  Use `eval' and
+	adjusted quoting so the expansion doesn't already happen in the
+	testsuite commands.
+	* HACKING: Update.
+
+2007-01-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Assume C89 for included headers, and throughout the testsuite.
+
+	* NEWS: Update.
+	* libltdl/argz.c: Do not include strings.h nor memory.h, include
+	string.h unconditionally.
+	Patch by Simon Josefsson <jas@extundo.com>.
+	* libltdl/libltdl/lt__private.h: Likewise.
+	* libltdl/m4/ltdl.m4 (LTDL_INIT): Do not check for string.h,
+	strings.h, memory.h.
+	* tests/cdemo/configure.ac: Assume presence of math.h.
+	* tests/cdemo/foo.c: Likewise.
+	* tests/demo/configure.ac: Likewise for math.h, string.h.
+	Assume 'const'.  Drop obsolete AC_EXEEXT.
+	* tests/demo/dlmain.c: Likewise.
+	* tests/demo/foo.c: Likewise.
+	* tests/depdemo/configure.ac: Likewise.
+	* tests/depdemo/l4/l4.c: Likewise.
+	* tests/f77demo/configure.ac: Likewise.  Also drop obsolete
+	AC_OBJEXT.
+	* tests/fcdemo/configure.ac: Likewise.
+	* tests/mdemo/configure.ac: Likewise.
+	* tests/mdemo/foo1.c: Likewise.
+	* tests/mdemo/foo2.c: Likewise.
+	* tests/mdemo2/configure.ac: Likewise.
+	* tests/pdemo/configure.ac: Likewise.
+	* tests/pdemo/longer_file_name_dlmain.c:
+	* tests/pdemo/longer_file_name_foo.c: Likewise.
+	* tests/pdemo/longer_file_name_foo2.c: Likewise.
+	* tests/tagdemo/configure.ac: Likewise.
+	* tests/tagdemo/foo.cpp: Likewise.
+
+2007-01-24  Reuben Thomas <rrt@sc3d.org>  (tiny change)
+
+	* doc/libtool.texi (Inter-library dependencies): Fix typo.
+
+2007-01-21  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [cygwin, mingw]:
+	Use `lib -OUT' rather than `lib /OUT' to avoid MSYS path
+	translation mangling.  Report by Christopher Hulbert.
+	* THANKS: Update.
+
+	* libltdl/config/ltmain.m4sh (func_mode_compile): Accept
+	suffixes matching `[fF][09].', for Fortran.
+	* tests/suffix.test: Also test F90, F95, f03, F03.
+
+	* Makefile.am (EXTRA_DIST): Add ChangeLog.2006.
+	* ChangeLog.2006: New, rotated, from...
+	* ChangeLog: ...here.
+
+2007-01-21  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi: Typo fixes.
+	* TODO: Likewise.
+
+Continued in ChangeLog.2006
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2008 b/ChangeLog.2008
new file mode 100644
index 0000000..5fa2699
--- /dev/null
+++ b/ChangeLog.2008
@@ -0,0 +1,1913 @@
+2008-12-19  Akim Demaille  <demaille@gostai.com>
+
+	Fix copyright notice.
+	* libltdl/config/ltmain.m4sh: Add missing comma.
+
+2008-12-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Add cache variables to link tests.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_LINKER_SHLIBS): Add cache variables to tests that
+	require the linker to work.  For shlibpath_overrides_runpath,
+	this also changes the semantics to let the result from the C
+	compiler take precedence.
+	* tests/no-executables.at (AC_NO_EXECUTABLES): New file.
+	* Makefile.am: Update.
+	* NEWS: Update.
+	Report of shlibpath_overrides_runpath issue by Mike Frysinger,
+	report of GCC issue by Andreas Schwab.
+
+2008-11-28  Paolo Bonzini  <bonzini@gnu.org>
+
+	Fix inadvertent commit.
+	* bootstrap: Revert.
+
+2008-11-28  Paolo Bonzini  <bonzini@gnu.org>
+
+	Fix manual typo.
+	* doc/libtool.texi (LT_INIT): Use correct config.status
+	invocation.  Reported by Akim Demaille.
+
+2008-11-28  Paolo Bonzini  <bonzini@gnu.org>
+
+	Do not use $ECHO within eval-ed `...`, as %s\\n becomes %s\n.
+	* HACKING: Document func_echo_all.
+	* libltdl/m4/libtool.m4: Use it within backticks that appear in
+	eval-ed variables.  Reported by Akim Demaille.
+
+2008-11-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix func_infer_tag $ECHO usage; some testsuite exposure.
+	* libltdl/config/ltmain.m4sh (func_infer_tag): Use func_echo_all
+	rather than $ECHO for possibly multiple arguments.
+	* tests/infer-tag.at (inferred tag, CXX inferred tag)
+	(F77 inferred tag, FC inferred tag, GCJ inferred tag): New file,
+	new tests.
+	* Makefile.am: Adjust.
+
+	* tests/runpath-in-lalib.at (Runpath in libtool library files):
+	Add $EXEEXT overlooked in patch yesterday.
+
+2008-11-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix expout and experr line ending issues.
+	* tests/testsuite.at (LT_AT_HOST_DATA): Renamed from..
+	(_LT_AT_TRANSLATE_TEXT_OUTPUT): ..this.
+	(LT_AT_EXEC_CHECK, LT_AT_NOINST_EXEC_CHECK): Do not use
+	_LT_AT_TRANSLATE_TEXT_OUTPUT any more.
+	* tests/configure-iface.at: Use LT_AT_HOST_DATA instead of
+	AT_DATA for `expout' files.
+	* tests/lt_dladvise.at (lt_dlopenadvise library loading):
+	Likewise.
+	* tests/need_lib_prefix.at (enforced lib prefix): Likewise.
+	Report by Roumen Petrov.
+
+	Relax link-order2 test for systems with partial wrong order.
+	* tests/link-order2.at (Link order of deplibs.): On w32 (and
+	others, e.g., AIX), the wrongly linked executable picks up only
+	one instance of the bad function instead of two; relax the test
+	to accept this; we still require the right link order with the
+	correctly linked executable.
+	Reported by Roumen Petrov and others.
+
+2008-11-23  Roumen Petrov  <bugtrack@roumenpetrov.info>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Add $EXEEXT to all linked programs in the new testsuite.
+	* tests/convenience.at, tests/ctor.at, tests/darwin.at,
+	tests/deplibs-ident.at, tests/duplicate_conv.at,
+	tests/duplicate_deps.at, tests/duplicate_members.at,
+	tests/export.at, tests/fail.at, tests/indirect_deps.at,
+	tests/inherited_flags.at, tests/link-order.at,
+	tests/link-order2.at, tests/lt_dladvise.at, tests/lt_dlexit.at,
+	tests/need_lib_prefix.at, tests/runpath-in-lalib.at,
+	tests/search-path.at, tests/shlibpath.at, tests/static.at,
+	tests/stresstest.at, tests/template.at, tests/testsuite.at:
+	Use $EXEEXT throughout, except in Makefile.am snippets where
+	automake takes care of it, and in testsuite macros that take
+	care of the extension.
+	Reports by Roumen Petrov and Alon Bar-Lev.
+
+2008-11-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Adjust executable run tests to cwrapper changes.
+	* tests/testsuite.at (LT_AT_EXEC_CHECK): Accept fifth argument
+	ARGS-OR-STATUS-ADJUST, for command-line arguments and/or exit
+	status flattening.  Rewrite to prefer the executable with the
+	`.exe' prefix over one without.  Test exit status against
+	expected exit status, not against zero, when determining whether
+	this may be a cross-compilation-induced result.
+	(LT_AT_NOINST_EXEC_CHECK): Likewise.
+	* tests/static.at (static linking flags for programs): Adjust
+	calls.
+	Report by Roumen Petrov.
+
+	No trailing period in Autotest test group names.
+	* tests/link-order.at (Link order test): Drop trailing period
+	from test name.
+	* tests/link-order2.at (Link order of deplibs): Likewise.
+
+2008-11-23  Vincent Torri  <vtorri@univ-evry.fr>  (tiny change)
+
+	Fix func_emit_cwrapperexe_src for WinCE: no errno support.
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src)
+	[__MINGW32CE__]: Do not use errno, do not include errno.h and
+	remove calls related to errno when using the mingw32ce compiler.
+
+2008-11-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	No libm in WinCE.
+	* libltdl/m4/libtool.m4 (LT_LIB_M) [cegcc*]: This system has
+	only a dummy libm, ignore.
+	Report by Vincent Torri.
+
+	Fix import library detection for WinCE.
+	* libltdl/config/ltmain.m4sh (func_win32_libid): Work for
+	pe-arm-wince import libraries.
+	* NEWS: Update.
+	Report by Vincent Torri.
+
+2008-11-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+	    Eric Blake  <ebb9@byu.net>
+
+	Fix $ECHO test to not influence other _AS_DETECT_SUGGESTED code.
+	* libltdl/m4/libtool.m4 (_LT_PROG_ECHO_BACKSLASH): Fix test to
+	not influence further tests registered with _AS_DETECT_SUGGESTED
+	and do not use a PATH below /tmp, to avoid influence by a third
+	party.
+
+2008-11-23  Alon Bar-Lev  <alon.barlev@gmail.com>  (tiny change)
+
+	Fix func_win32_libid for 64-bit Windows.
+	* libltdl/config/ltmain.m4sh (func_win32_libid): Accept file
+	format 'pe-x86-64'.
+	* NEWS: Update.
+
+2008-11-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Avoid newlines in some AT_CHECK commands.
+	* tests/standalone.at (linking libltdl without autotools): Wrap
+	lines with dnl, to avoid turning off tracing of AT_CHECK.
+	* tests/subproject.at (linking libltdl without autotools):
+	Likewise.
+
+	Replace uses of $SED $basename.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Replace instances
+	of `$ECHO ... | $SED' with calls to func_basename.
+	* libtoolize.m4sh (func_copy, func_serial)
+	(func_massage_aclocal_DATA): Likewise, replace with
+	func_dirname_and_basename.
+	* tests/defs.m4sh (func_configure_nofail, func_make, func_exec):
+	Likewise.
+
+	No need to prepend $progname with './'.
+	* libltdl/config/general.m4sh (func_dirname_and_basename): $ECHO
+	copes with leading hyphens now, so do not mangle $progname any
+	more.
+
+	Revenge of the $ECHO. Kill most uses of Xsed.
+	* libltdl/config/general.m4sh: Replace all uses of `$ECHO "X..."
+	| $Xsed' with `$ECHO "..." | $SED', and employ further trivial
+	simplifications.  Replace $ECHO with echo where appropriate.
+	(func_echo_all): New function.
+	* libltdl/config/getopt.m4sh: Likewise simplifications.
+	* libltdl/config/ltmain.m4sh: Likewise.
+	* libltdl/m4/libtool.m4: Likewise.
+	(LT_CMD_MAX_LEN): Use func_fallback_echo, to ensure that the
+	command line is passed through an exec* function.
+	* libtoolize.m4sh: Likewise simplifications.  Use func_echo_all
+	to implement --dry-run.
+	* tests/defs.m4sh: Likewise simplifications.
+	* tests/quote.test: Likewise simplifications.
+
+	Fix matching of Sun Fortran compiler on Linux.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [ linux ]: Also
+	match `Sun Ceres Fortran' compiler; reorder with C compiler
+	matching.
+	* THANKS: Update.
+	Report by Ethan Mallove.
+
+2008-11-21  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Fix --verbose option; add new --no-{silent|quiet|verbose} options.
+
+	* libltdl/config/ltmain.m4sh (usage): Document
+	new options --no-silent/--no-quiet and --no-verbose.
+	(func_enable_tag): Handle new options.
+	Modified --verbose to actually activate opt_verbose.
+	New behavior: --silent disables both "normal" output and
+	func_verbose output.  --verbose enables both "normal"
+	output and func_verbose output. --no-silent enables
+	"normal" output, but does not affect func_verbose output.
+	--no-verbose disables func_verbose output, but does not
+	affect "normal" output.
+	* NEWS: announce new options --no-silent/--no-quiet, and
+	--no-verbose.
+	* doc/libtool.texi: document new options --no-silent/--no-quiet
+	and --no-verbose.
+
+2008-11-20  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix match patterns for cegcc*.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Match '*cegcc*'
+	instead of '*cegcc' for $host_os.
+	* libltdl/m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD): Likewise.
+	* tests/lt_dladvise.at (lt_dlopenadvise library loading):
+	Likewise.
+	* libltdl/m4/ltoptions.m4 (AC_LIBTOOL_DLOPEN): Match
+	'*-*-cegcc*' for $host.
+
+	Ensure $ac_aux_dir is initialized for LIBTOOL_DEPS.
+	* libltdl/m4/libtool.m4 (LT_INIT): Require
+	AC_CONFIG_AUX_DIR_DEFAULT.
+	* tests/old-m4-iface.at (AM_PROG_LIBTOOL): Amend test to
+	expose this.
+	Report, analysis, and test example by Jakub Bogusz.
+
+	Check for bogus aclocal.m4 contents in bootstrap and dist-hook.
+	* Makefile.am (dist-hook): Bail out if shipped aclocal.m4 files
+	contain LT_INIT, AC_PROG_LIBTOOL, or AM_PROG_LIBTOOL macro
+	definitions.  These can only come from bogus pull-ins from older
+	installed Libtool macro files.
+	* bootstrap: Likewise.
+	Report by Akim Demaille.
+
+2008-11-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix $ECHO abuse exposed by recent patch.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER): Require
+	_LT_CHECK_SHELL_FEATURES, for $lt_NL2SP.  Always quote argument
+	to $ECHO.
+
+	Skip sys_lib_search_path on systems without libz.
+	* tests/search-path.at (sys_lib_search_path): Autotest needs at
+	least one AT_CHECK executed in a test group.  So if we haven't
+	found -lz anywhere, as may happen with cross-compilers, skip the
+	test.
+	* THANKS: Update.
+	Report by Alon Bar-Lev.
+
+	Fix execute mode test to actually expose cwrapper failures.
+	* tests/execute-mode.at (execute mode): Actually also test the
+	cwrapper on the arguments.
+	Report by Bruno Haible.
+
+2008-11-15  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Add func_win32_import_lib_p.
+	* libltdl/config/ltmain.m4sh (func_win32_import_lib_p):
+	New function.
+
+2008-11-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix archive_cmds for older cc on HP-UX 11.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [hp-ux11*, !GCC]
+	[!hppa*64*, !ia64*] <archive_cmds>: Older releases of the HP-UX
+	11.00 C compiler do not support -b yet; use a link test to
+	decide whether $LD should be used for library creation.
+	* THANKS: Update.
+	Report by Daniel Richard G.
+
+2008-11-12  Paolo Bonzini  <bonzini@gnu.org>
+
+	* configure.ac: Bump Autoconf requirement.
+	* libltdl/config/general.m4sh: Use $as_echo as default $ECHO.
+	* tests/testsuite.at: Use $as_echo as default $ECHO.
+
+	* libltdl/m4/libtool.m4 (LT_INIT): Add _LT_SHELL_INIT to
+	work around Autoconf <2.64 bug.
+	(_LT_OUTPUT_LIBTOOL_COMMANDS_INIT): Add func_fallback_echo.
+	Eliminate lt_ECHO requoting.
+	(_LT_SHELL_INIT): Use a public M4sh diversion.
+	(_LT_PROG_ECHO_BACKSLASH): Rewrite.
+	(LT_CMD_MAX_LEN): Do not use --fallback-echo.
+	* libltdl/config/ltmain.m4sh: Remove --no-reexec and --fallback-echo
+	handling.
+	(func_fallback_echo): New.
+	(func_emit_wrapper_part1): Quote ECHO.  Remove --no-reexec and
+	--fallback-echo handling.
+	(Execute mode): Do not set qecho.
+
+2008-11-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Use -no-undefined in install tests.
+	* tests/install.at (Install tests): Use `-no-undefined'.
+
+2008-11-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Do not use `test ... -a ...'.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [hpux10, hpux11]:
+	Replace test -a with test && test.
+
+2008-11-11  Roumen Petrov  <bugtrack@roumenpetrov.info>  (tiny change)
+
+	Fix destdir tests in cross compile mode.
+	* tests/destdir.at (Simple DESTDIR install)
+	(DESTDIR with in-package deplibs): Use $EXEEXT throughout.
+	* THANKS: Update.
+
+2008-11-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Simplify cwrapper handling a bit.
+	* libltdl/config/ltmain.m4sh (func_emit_wrapper_part1)
+	(func_emit_wrapper_part2, func_to_host_path)
+	(func_to_host_pathlist, func_emit_wrapper): Simplify using
+	default argument, func_append.
+
+2008-11-10  Paolo Bonzini  <bonzini@gnu.org>
+
+	Separate part of _LT_SETUP into other macros, detect ECHO sooner.
+	* libltdl/m4/libtool.m4 (_LT_PREPARE_SED_QUOTE_VARS): New macro,
+	extracted from...
+	(_LT_SETUP): ... here.  Require _LT_PROG_ECHO_BACKSLASH sooner.
+
+2008-11-10  Paolo Bonzini  <bonzini@gnu.org>
+
+	Fix quoting when config.status generates libtool config.
+	* libltdl/m4libtool.m4 (_LT_OUTPUT_LIBTOOL_COMMANDS_INIT):
+	Double quote ECHO-ed variables.
+
+2008-11-10  Paolo Bonzini  <bonzini@gnu.org>
+
+	Use documented M4sh interfaces.
+	* clcommit.m4sh: Do not unset CDPATH, use AS_INIT and M4sh diversions.
+	* libltdl/config/mailnotify.m4sh: Likewise.
+	* libtoolize.m4sh: Likewise.
+	* tests/defs.m4sh: Likewise.
+	* tests/testsuite.at: Move AT_INIT invocation at the top.
+
+	* libltdl/m4/libtool.m4 (_LT_INIT_GENERATED): New.
+	(LT_OUTPUT): Use it.
+
+	* libltdl/config/general.m4sh (M4SH_IN_HEADER): New.
+	(progpath): Move setting before $0 could be clobbered.
+	* libltdl/config/ltmain.m4sh (M4SH_IN_HEADER): New.
+
+2008-11-10  Paolo Bonzini  <bonzini@gnu.org>
+
+	Run sh.test on the M4sh source.
+	* tests/defs.m4sh (scripts): Point to pre-m4 sources.
+
+2008-11-10  Paolo Bonzini  <bonzini@gnu.org>
+
+	Avoid that autom4te complains about unexpanded macros.
+	* libtoolize.m4sh: Allow occurrences of "dnl" and use quadrigraphs
+	to protect other m4 macros.
+
+2008-11-11  Bruno Haible  <bruno@clisp.org>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix cwrapper argument mangling on w32.
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src): On
+	mingw, preprocess the argument vector through prepare_spawn.
+	* tests/execute-mode.at (execute mode): Output args
+	newline-separated.  Extend tests by more argument pairs that
+	contain special characters, where the w32 cwrapper fails.
+	Also test a real compiled program, linked against an uninstalled
+	library, to expose cwrapper issues.
+	* NEWS: Update.
+
+2008-11-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Update to GFDL 1.3.
+	* doc/fdl.texi: Update to GFDL 1.3.
+	* doc/libtool.texi: Adjust.
+	* NEWS: Update.
+
+2008-11-09  Alexei Sheplyakov  <varg@theor.jinr.ru>  (tiny change)
+
+	Fix cross compilation with wine for the case SHELL != bash.
+	* libltdl/config/ltmain.m4sh (func_to_host_path): Avoid escape
+	sequence interpretation by 'echo', for w32-style paths.
+	* THANKS: Update.
+
+2008-10-28  Michael Haubenwallner  <michael.haubenwallner@salomon.at> (tiny change)
+
+	Fix checks for unsupported allow_undefined_flag.
+	* tests/tagdemo-undef.test: Match allow_undefined_flag
+	correctly, for SKIPping.
+	* tests/cdemo-undef.test: Likewise.
+
+2008-10-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/testsuite.at (_LTDL_PROJECT_FILES): Fix dependencies for
+	parallel make.
+
+	* libtoolize.m4sh (func_nonemptydir_p): Fix typo in error
+	message.
+
+2008-10-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix Autoconf 2.59 incompatibilty.
+	* libltdl/m4/ltdl.m4 (_LTDL_SETUP): m4_pattern_allow
+	`LT_LIBEXT'; Autoconf 2.59's AC_DEFINE* macros didn't do this
+	automatically yet.
+	* NEWS, THANKS: Update.
+	Report by Marcel Loose.
+
+2008-10-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Atomic shared library install permissions on HP-UX.
+	The HP-UX 11 runtime linker fails to mmap shared libraries
+	without execute permissions.  Fixing them with postinstall_cmds
+	may be too late, as ln, sed, and chmod may link against the
+	library being installed.
+
+	* libltdl/m4/libtool.m4 (install_override_mode): New LT_DECL.
+	(_LT_SYS_DYNAMIC_LINKER) [hpux9*, hpux10*, hpux11*]: Set it.
+	* libltdl/config/ltmain.m4sh (func_mode_install): Build a second
+	command line, $install_shared_prog, for the installation of the
+	shared library.  Override resp. set the permission mode if
+	install_override_mode is nonempty.
+	* doc/libtool.texi (libtool script contents): Document it.
+	* tests/install.at (Install tests): New test.
+	* Makefile.am (TESTSUITE_AT): Adjust.
+	(TESTS_ENVIRONMENT): Pass INSTALL.
+	Report by Bruno Haible.
+
+2008-09-26  Eric Blake  <ebb9@byu.net>
+
+	Avoid gcc warning.
+	* libltdl/loaders/loadlibrary.c (vm_open): Don't check for array
+	being a NULL pointer.
+
+2008-09-20  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Man pages for libtoolize and libtool, new command line option
+	--help-all.
+	* Makefile.am (dist_man1_MANS, update_mans): New macros.
+	($(srcdir)/doc/libtool.1, $(srcdir)/doc/libtoolize.1): New
+	rules.  Use --help-all for libtool.
+	(MAINTAINERCLEANFILES): New macro.  Add dist_man1_MANS.
+	(BUILT_SOURCES): Add libtoolize.
+	* configure.ac: Check for help2man, set HELP2MAN.
+	* doc/libtool.texi: Add @direntry for libtool-invocation.
+	(Invoking libtool): Document -h, --help-all.  Reorder mode
+	description for consistency.
+	(Compile mode): Do not document -Wl,FLAG and -XCClinker here.
+	(Link mode): Document -Wc,FLAG here, reformat a bit.
+	* libtoolize.m4sh: Reformat --help output a bit, to help
+	help2man.
+	* libltdl/config/ltmain.m4sh: Likewise.  Also, set PROGRAM to
+	`libtool', not `ltmain.sh', so the former is used in the man
+	page.
+	New argument `--help-all'.  If given, call func_help and
+	func_mode_help several times, beating output in shape with sed.
+	(func_mode_help): Do not exit here.
+	* libltdl/config/getopt.m4sh (func_usage): Work with different
+	indentations, but require comment hash in first column, when
+	grepping for '-h' in usage to end short help.
+	(func_help): Accept optional argument to not exit.
+	* NEWS, THANKS: Update.
+	Suggestion by Karl Berry.
+
+2008-09-08  Gary V. Vaughan  <gary@gnu.org>
+
+	Use `-version-info 9:0:2' for one added iface since 2.2.4.
+	* libltdl/Makefile.inc (LTDL_VERSION_INFO): Make the libltdl
+	version number match 2.2.6a rerelease.
+
+	Add ./commit option for pushing tags back to origin.
+	* clcommit.m4sh (opt_tags): New --tags push option.
+	(func_commit): Run `$GIT push --tags' if --tags was passed.
+	* HACKING (Release Procedure): Note the requirement to pass
+	--tags to ./commit for new release tag to be push back to
+	origin.
+
+2008-09-07  Gary V. Vaughan  <gary@gnu.org>
+
+	Retire gnu.org news.html in favour of savannah news.
+	* HACKING (Release Procedure): Add instructions for sending
+	a web release announcement to http://planet.gnu.org via
+	the savannah news manager.
+
+	Add untested git push conflict testing to commit script.
+	* clcommit.m4sh (func_check_conflicts): Test return status
+	of 'git push --dry-run', and display an error on non-zero.
+
+	Enable release procedure to work with lzma OLDRELEASE file.
+	* Makefile.maint (diffs, prev-tarball, new-tarball): If lzma
+	tarballs are present use them to generate the diffs, otherwise
+	use gz tarballs if they are present, or else complain if both
+	are missing.
+
+	Set SCM version number to 2.2.7a.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.7a.
+	* NEWS: Updated.
+
+	GNU Libtool 2.2.6 was released.
+
+	Fix typo in Makefile.maint.
+	* Makefile.maint (git-news): Renamed to check-news, since it
+	doesn't actually run git.  Adjust all dependees.
+
+	Run `git commit -a' when no files are passed.
+	* clcommit.m4sh (func_commit): Add -a argument if necessary.
+
+	Prepare for next stable release.
+	* libltdl/Makefile.inc (LTDL_VERSION_INFO): Update.
+	* libltdl/m4/libtool.m4: Bump serial number to account for
+	changes since 2.2.4 release.
+	* INSTALL, config/config.guess, config/texinfo.tex: Updated
+	from canonical source.
+	* configure.ac (AM_INIT_AUTOMAKE): Specify dist-lzma, which
+	was introduced after automake-1.10 was released.
+	(abs_top_srcdir, abs_top_builddir): No need to substitute these
+	from configure anymore, since we require automake 1.10.1, which
+	does perform the substitutions properly.
+	(TIMESTAMP): Normal releases were displaying the long-form
+	timestamp.  Fix to show the short release timestamp as per
+	alpha release numbers.
+	* NEWS: Update with missing entries from ChangeLog.
+	* HACKING (Release Procedure): We release lzma tarballs now
+	but no xdeltas.
+	* Makefile.maint: Updated to match Release Procedure
+	instructions in HACKING.
+
+	Convert mailnotify headers to git.
+	* clcommit.m4sh: Improve mailnotify contents.
+
+	Make ./commit useful again.
+	* clcommit.m4sh: Major overhaul and simplification for git.
+
+2008-09-06  Gary V. Vaughan  <gary@gnu.org>
+
+	Fix 'DISTCHECK_CONFIGURE_FLAGS=--program-prefix=g' bug.
+	* tests/testsuite.at (_LIBTOOLIZE_TRANSFORM): Fix test failures
+	with --program-prefix, where the test case output contains the
+	transformed name somewhere other than the beginning of a line.
+	* libtoolize.m4sh (func_check_macros): Be sure to always use
+	the transformed name in output messages.
+
+2008-09-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Do not remove .gcno files when linking.
+	* libltdl/config/ltmain.m4sh (func_mode_link): When removing
+	potential output files before linking, do not remove *.gcno
+	profile information GCC outputs next to object files in `.libs'.
+	Report by Vincent Torri.
+
+2008-09-01  Peter O'Gorman  <peter@pogma.com>
+
+	Revert 75142db4f8afc65ba7aae0ed80ea0b35bd9cc382 (AIX libltdl
+	dlopen(NULL)
+
+	* libltdl/m4/ltdl.m4: Remove LTDL_DLOPEN_SELF_WORKS define.
+	* libltdl/loaders/dlopen.c: Remove LTDL_DLOPEN_SELF_WORKS check.
+	* libltdl/m4/libtool.m4 [aix]: Set export_dynamic_flag_spec to
+	-Wl,-bexpall. This is a temporary workaround until a real fix
+	is implemented.
+	* NEWS: document it.
+
+2008-08-26  Peter O'Gorman  <peter@pogma.com>
+
+	Allow for extensions other than .a for preloaded modules.
+	* libltdl/m4/ltdl.m4 (_LTDL_SETUP): Define LT_LIBEXT.
+	* libltdl/ltdl.c (lt_dladvise_preload): Use it.
+	Reported by Ralf Wildenhues.
+
+2008-08-26  Peter O'Gorman  <peter@pogma.com>,
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Remove unnecessary global argz functions.
+	* libltdl/argz.c (argz_add,argz_count): Remove.
+	* libltdl/argz_.h (argz_add,argz_count): Remove.
+	* NEWS: Announce it.
+	* tests/ltdl-api.at: Test so we don't repeat it.
+	* Makefile.am: Add new test.
+
+2008-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Initial support for Lahey Fortran on GNU/Linux.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	[linux] <lf95>: Add support for Lahey Fortran 8.1.
+	* NEWS, THANKS: Update.
+	Suggested by Craig Tierney.
+
+2008-08-21  Sam Thursfield  <ssssam@gmail.com>  (tiny change)
+
+	Avoid leading separator in PATH for DLL search.
+	* libltdl/config/ltmain.m4sh (func_mode_link) [cygwin, mingw]
+	[ pw32, os2, cegcc]: Fix dllsearchpath not to contain leading
+	separator.
+	* THANKS: Update.
+
+2008-08-21  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Quote $#.
+
+	Disallow `-L path', do not misparse it silently.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Diagnose `-L'
+	without argument, and `-L path', i.e., with a space.
+	* tests/fail.at (Failure tests): Test for these failures.
+	* THANKS: Update.
+	Report by Olaf Lenz.
+
+2008-08-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Avoid test failure due to broken dlpreloading of shared library.
+	* tests/lt_dladvise.at (lt_dlopenadvise library loading): Drop
+	some newlines in AT_CHECK commands, for better 'testsuite -x'
+	output.  Only create a static installable libpreload.la, to
+	avoid exposing the bug libtool currently has with preloading of
+	shared libraries.  Add a note to revisit this later.
+
+2008-08-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Parallel make testsuite fixes.
+	* tests/configure-iface.at (installable libltdl)
+	(--with-ltdl-include/lib, --with-included-ltdl): Add dlopened
+	libmodule.la to main_DEPENDENCIES.
+	* tests/old-m4-iface.at (AC_WITH_LTDL): Likewise, let ltdldemo
+	depend upon module.la and libltdl/libltdlc.la.
+	* tests/testsuite.at (LT_AT_MAKE): Invoke each target in turn,
+	default to 'all'.
+	* tests/early-libtool.at (config.lt): Define 'all' target.
+
+	* HACKING: Update for git, fix some minor nits.
+
+2008-08-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Remove use of exit in configure test sources.
+	* libltdl/m4/libtool.m4 (_LT_TRY_DLOPEN_SELF): Return from main,
+	to avoid using undeclared exit.
+	Report against OpenMPI from Coverity via Jeff Squyres.
+
+	* tests/configure-iface.at (convenience libltdl): Ignore warning
+	from parallel make.
+
+2008-08-07  DJ Delorie  <dj@redhat.com>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [tpf]
+	<library_names_spec>: Fix typo in variable name.
+
+2008-08-06  Steve Ellcey  <sje@cup.hp.com>
+
+	Use -fPIC with GCC on HP-UX/ia64.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	[ia64-*-hpux*]: Specify -fPIC when using GCC to build shared
+	libraries.
+
+2008-08-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* NEWS: Minor fixups.
+
+2008-08-01  Gary V. Vaughan  <gary@gnu.org>
+
+	Bring NEWS up to date.
+	* NEWS: Add missing summaries since 2.2.4 release.
+
+	Implement lt_dlopening of only preloaded modules.
+	* libltdl/m4/ltdl.m4 (LTDL_INIT): Check for a libltdl that
+	provides lt_dladvise_preopen when deciding if installed libltdl
+	is 'new enough'.
+	* libltdl/libltdl/lt__private.h (lt__advise): Add a new
+	is_preload flag.
+	* libltdl/ltdl.c (lt_dladvise_preload): New api call to set it.
+	(try_dlopen): If it is set, and the search of preloaded modules
+	didn't return a match, don't bother searching the filesystem.
+	* libltdl/ltdl.h (lt_dladvise_preload): Declare it.
+	* doc/libtool.texi (Libltdl Interface): Document it.
+	* tests/lt_dladvise.at: Test it (and incidentally add some test
+	coverage for `libtool -dlpreopen').
+	* NEWS: Announce it.
+
+2008-08-01  Vincent Torri  <doursse@users.sf.net>
+
+	Add cegcc (Windows CE/PocketPC) support.
+	* libltdl/config/ltmain.m4sh: Add 'cegcc' case where needed.
+	* libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN, LT_SYS_DLOPEN_SELF)
+	(_LT_SYS_DYNAMIC_LINKER, _LT_CHECK_MAGIC_METHOD)
+	(_LT_CMD_GLOBAL_SYMBOLS, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG): Likewise.
+	* libltdl/m4/ltoptions.m4 (AC_LIBTOOL_DLOPEN): Likewise.
+	* NEWS: Update.
+	* THANKS: Update.
+
+2008-07-31  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_to_host_path): Fix sh.test
+	failure.
+	Report by Paolo Bonzini.
+
+2008-07-31  Paolo Bonzini  <bonzini@gnu.org>
+
+	* ltmain.m4sh (func_emit_cwrapperexe_src): Factor
+	multiple closed braces into the next cat command.
+
+2008-06-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux] <icc, icpc>:
+	Use -fPIC, newer Intel compilers (icc 10, ifort 9) reject -KPIC.
+	* tests/localization.at: Skip test if the compiler fails merely
+	due to the locale setting.
+	* THANKS: Update.
+	Report by Vincent Lefevre.
+
+2008-06-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Linking executables, Static libraries)
+	(Modules for libltdl, Distributing libltdl): Remove TABs from
+	the manual.
+
+2008-06-13  Peter O'Gorman  <peter@pogma.com>
+
+	Support ifort on darwin.
+	* libltdl/m4/libtool.m4 (_LT_DARWIN_LINKER_FEATURES): Build
+	shared libraries with ifort.
+	Reported by Christopher Hulbert.
+
+2008-06-01  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[mingw] fix cross-compile-with-wine case
+	* libltdl/config/ltmain.m4sh (func_to_host_path)
+	[host=mingw, build!=mingw|cygwin]: check that winepath
+	stdout is non-empty and exit code is 0, instead of checking
+	stderr.
+	Reported by: Roumen Petrov
+
+2006-06-01  Stas Maximov  <smaximov@ieee.org>  (tiny change)
+
+	Check only regular files, not devices, for lalibs.
+	* libltdl/config/ltmain.m4sh (functions func_lalib_p)
+	(func_lalib_unsafe_p): Only read regular files and not device
+	files.  Avoids blocking libtool executing gdb, when a
+	pseudo-terminal device /dev/pts/NN is given as one of the
+	arguments to gdb, as in:
+	libtool --mode=execute gdb -q -nw -i mi -tty /dev/pts/4 prog
+
+2008-05-31  Peter O'Gorman  <peter@pogma.com>
+
+	Skip darwin test if fat link fails.
+	* tests/darwin.at: Skip if we can not link a fat program.
+	Reported by Daniel Macks <dmacks@netspace.org>
+
+2008-05-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	libtoolize should not remove config.guess, config.sub.
+	* libtoolize.m4sh (all_pkgconfig_files): Do not list
+	config.guess nor config.sub.  We don't install them without
+	--install, and the project may not be using Automake.
+	Report by Andreas Schwab.
+
+	Simplify argument parsing in cwrapper.
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src):
+	Use NULL where appropriate.  Do not compute length of arguments
+	needlessly.
+
+2008-05-25  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[mingw] Add cross-compile support to cwrapper
+	* libltdl/config/ltmain.m4sh (func_to_host_path) [$host=mingw]:
+	If present, use winepath to convert from $build to $host
+	if $build is neither mingw (msys) nor cygwin.  Use unconverted
+	path as fallback when conversion fails. Also update comments.
+	(func_to_host_pathlist) [$host=mingw]: Ditto. For fallback case,
+	use simplistic ':' to ';' path separator translation.
+
+2008-05-25  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Cwrapper should not eat -- arguments
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src)
+	[file scope]: Defined all option strings in terms of macro
+	LTWRAPPER_OPTION_PREFIX. Similarly defined all option string
+	lengths in terms of macro LTWRAPPER_OPTION_PREFIX_LENGTH.
+	[main]: Modified option parsing algorithm to pass -- on to
+	target, and to not stop processing arguments when -- is seen.
+	Added check for unrecognized options in reserved namespace
+	defined by LTWRAPPER_OPTION_PREFIX.
+
+2008-05-25  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix ifort settings again.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux] <ifort>:
+	Unlike icc and ecc, not all ifort versions understand `-KPIC',
+	e.g. version 10.1, so use `-fPIC' instead.
+	Report by Jeff Squyres.
+
+2008-05-20  Eric Blake  <ebb9@byu.net>
+
+	Resynchronize argz whitespace changes from gnulib.
+	* libltdl/m4/argz.m4: Kill trailing whitespace.
+	* libltdl/argz.c: Likewise.
+
+2008-05-19  Eric Blake  <ebb9@byu.net>
+
+	Fix regression from two days ago.
+	* libltdl/m4/ltdl.m4 (_LT_LIBOBJ): Don't refer to deleted macro.
+
+2008-05-17  Eric Blake  <ebb9@byu.net>
+
+	Speed up bootstrap by improving lt_combine.
+	* libltdl/m4/ltsugar.m4 (lt_combine): Mirror Autoconf 2.62
+	improvements.  Includes a semantic change where the separator can
+	now be empty, and where an empty fourth argument is now treated as
+	a valid suffix.
+	* libltdl/m4/libtool.m4 (_lt_decl_varnames_tagged): Adjust to new
+	semantics of lt_combine.
+	(lt_decl_varnames_tagged): Fix quoting and optimize.
+
+	Kill _LT_LIBSOURCES; it wasn't checking anything useful.
+	* libltdl/m4/ltdl.m4 (_LT_LIBSOURCES): Delete.
+	(LTDL_INIT): Ignore arguments to AC_LIBSOURCES during _LTDL_SETUP,
+	on the assumption that libtoolize correctly installed them.
+
+2008-05-13  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[mingw|cygwin] Modify cwrapper to invoke target directly.
+	* libltdl/config/ltmain.m4sh (func_to_native_path):
+	New function. If $host is mingw, and $build is mingw
+	or cygwin, convert path to mingw native format.
+	(func_to_native_pathlist): New function. Ditto, for
+	:-separated pathlists.
+	(func_emit_cwrapperexe_src) [__CYGWIN__ && __STRICT_ANSI__]:
+	Ensure putenv and setenv are declared. Define HAVE_SETENV.
+	(func_emit_cwrapperexe_src) [main]: Add new constants to
+	hold desired PATH settings; initialize and use functions
+	above to convert to $host format if necessary. Add new
+	command-line options --lt-env-set, --lt-env-prepend, and
+	--lt-env-append. No longer emit wrapper script as integral
+	part of launching child. Remove support for (now) unnecessary
+	$TARGETSHELL. Exec actual target executable directly.
+	(func_emit_cwrapperexe_src) [lt_setenv, lt_extend_str]
+	[lt_split_name_value, lt_opt_process_env_set]
+	[lt_opt_process_env_prepend, lt_opt_process_env_append]
+	[lt_update_exe_path, lt_update_lib_path]: New functions.
+
+2008-05-11  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Ensure cwrapper compiles without warnings under -std=c99.
+	* libltdl/config/ltmain.m4sh (func_emit_wrapper_part1):
+	new function.
+	(func_emit_wrapper_part2): new function.
+	(func_emit_wrapper): delegate to new functions.
+	(func_emit_cwrapperexe_src) [__CYGWIN__ && __STRICT_ANSI__]:
+	ensure realpath is declared.
+	(func_emit_cwrapperexe_src): declare two different strings
+	to each hold part of the wrapper script content. Initialize
+	using new func_emit_wrapper_partX functions.
+	(func_emit_cwrapperexe_src) [main]: when emitting wrapper
+	script content, use both strings.
+	Reported by Yaakov Selkowitz.
+
+2008-05-06  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Ensure $OBJDUMP is defined
+	* libltdl/m4/libtool.m4 (_LT_DECL_OBJDUMP): new macro ensures
+	that $OBJDUMP is always defined sanely.
+	(_LT_SYS_DYNAMIC_LINKER): call it.
+	(_LT_CHECK_MAGIC_METHOD): call it.
+
+2008-05-05  Gary V. Vaughan  <gary@gnu.org>
+
+	Fix libtoolize test failure with aclocal < 1.10.1
+	* tests/libtoolize.at
+	(verbatim aclocal.m4 w/o AC_CONFIG_MACRO_DIR): Older aclocal
+	requires a space between -I and the directory argument.
+	Reported by Daniel Macks <dmacks@netspace.org>
+
+2008-05-04  Gary V. Vaughan  <gary@gnu.org>
+
+	Set SCM version number to 2.2.5a.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.5a.
+	* NEWS: Updated.
+
+	GNU Libtool 2.2.4 was released.
+
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.4.
+	* libltdl/Makefile.inc (LTDL_VERSION_INFO): C:R+1:A because the
+	interfaces are unchanged, even though we improved the code some
+	more.
+	* NEWS: Updated.
+
+	Macro file serial updates for next stable release.
+	* libltdl/m4/libtool.m4, libltdl/m4/ltdl.m4,
+	libltdl/m4/ltoptions.m4, libltdl/m4/lt~obsolete.m4: Bump serial
+	numbers to account for changes since 2.2.2 release.
+
+	Make libtoolize tests work with distcheck.
+	* tests/testsuite.at (_LIBTOOLIZE_TRANSFORM): When $tst_aclocal
+	is set, transform paths that use it to generic
+	/usr/local/share/aclocal in time for AT_CHECK comparisons.
+
+2008-05-03  Gary V. Vaughan  <gary@gnu.org>
+
+	Don't trip over outdated acinclude.m4.
+	* libtoolize.m4sh (all_pkgconfig_files, all_pkgmacro_files)
+	(all_pkgltdl_files): New variables listing all files ever
+	maintained by any release of libtoolize.
+	(func_install_pkgconfig_parent, func_install_pkgltdl_files)
+	(func_install_pkgconfig_subproject, func_install_pkgmacro_parent)
+	(func_install_pkgmacro_subproject): Carefully clean up any files
+	that may have been installed by previous libtoolize releases.
+	* tests/libtoolize.at: New test for libltdl/acinclude.m4 removal.
+	Reported by Andreas Schwab <schwab@suse.de>.
+
+2008-05-02  Peter O'Gorman  <peter@pogma.com>
+
+	It helps to close quotes.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Add closing '.
+
+2008-05-01  Peter O'Gorman  <peter@pogma.com>
+
+	Use AC_CHECK_TOOL for otool and otool64.
+	* libltdl/m4/libtool.m4 (_LT_REQUIRED_DARWIN_CHECKS): Check.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Use.
+	Reported by Richard Purdie <rpurdie@rpsys.net>
+
+2008-04-30  Eric Blake  <ebb9@byu.net>
+
+	Support cygwin 1.7.0 in loadlibrary loader.
+	* libltdl/m4/ltdl.m4 (LT_LIB_DLLOAD) <cygwin>: Check for modern
+	function.
+	* libltdl/loaders/loadlibrary.c (vm_open): Avoid deprecated
+	cygwin_conv_to_full_win32_path.
+
+2008-04-29  Gary V. Vaughan  <gary@gnu.org>
+
+	New libtoolize --no-warn option and LIBTOOLIZE_OPTIONS parsing.
+	* libltdl/config/general.m4sh (opt_warning): New option.
+	(func_warning): Only display a warning message if $opt_warning
+	is true.
+	* libtoolize.m4sh: Accept options in LIBTOOLIZE_OPTIONS
+	environment variable.
+	(--no-warn): Parse new option.
+	(func_serial_update_check, func_keyword_update): Use func_warning.
+	(func_check_macros): Bail out before style issues nags when
+	$opt_warning is false.
+	* doc/libtool.texi (Invoking Libtoolize): Document it.
+	* tests/libtoolize.at: Test it.
+	* NEWS: Updated.
+
+	Fix libtoolize test failure with aclocal-1.10.1.
+	* tests/libtoolize.at
+	(verbatim aclocal.m4 w/o AC_CONFIG_MACRO_DIR): Force aclocal to
+	search the source tree for latest libtool macros.
+
+2008-04-24  Eric Blake  <ebb9@byu.net>
+
+	Fix bug in 2008-04-21 type improvements.
+	* libltdl/ltdl.c (load_deplibs): Fix casting bug.
+
+2008-04-23  Michael Haubenwallner  <michael.haubenwallner@salomon.at>
+
+	Use /nonexistent as destination for files not to be installed.
+	* tests/darwin.at (darwin fat compile): Fix typo.
+	* tests/inherited_flags.at (inherited_linker_flags): Change
+	-rpath to /nonexistent.  This helps to avoid accidentally
+	picking up libraries below /usr/local.
+	* tests/template.at (simple template test): Likewise.  Fixes
+	test failure for additional incompatible libstdc++ in
+	/usr/local.
+	* tests/testsuite.at (configure_options): Add
+	--prefix=/nonexistent.
+
+2008-04-23  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (rerun_aclocal): Remove unused variable.
+	Reported by Olly Betts <olly@survex.com>
+
+2008-04-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/static.at (ccache -all-static): Ignore link warnings.
+	Report by Gary V. Vaughan.
+
+2008-04-22  Gary V. Vaughan  <gary@gnu.org>
+
+	Libtoolize now advises AC_CONFIG_MACRO_DIR use where appropriate.
+	* libtoolize.m4sh (func_check_macros): Always advise use of
+	AC_CONFIG_MACRO_DIR when not able to copy libtool macros into
+	the project tree.
+	* tests/libtoolize.at: New test for correct diagnosis of mismatch
+	between AC_CONFIG_MACRO_DIR and ACLOCAL_AMFLAGS.
+	Update expected output of other tests.
+	* NEWS: Updated.
+
+2008-04-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix regression over 1.5.26 with ccache $CC -all-static.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Add
+	$link_static_flag to compile_command and link_command only
+	later, instead of right after a possible compiler wrapper.
+	* tests/static.at (ccache -all-static): New test.
+	* THANKS: Update.
+	Report by Richard Purdie.
+
+2008-04-22  Andreas Schwab  <schwab@suse.de>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix default argument for AC_LIBLTDL_CONVENIENCE.
+	* libltdl/m4/ltdl.m4 (AC_LIBLTDL_CONVENIENCE): Default argument
+	to libltdl.
+	(AC_LIBLTDL_INSTALLABLE): Likewise.
+	* tests/configure-iface.at (convenience libltdl): New test.
+
+2008-04-21  Gary V. Vaughan  <gary@gnu.org>
+
+	Only complain that files are up-to-date with --force.
+	As a side effect, this also means that when `aclocal' copies the
+	libtool macros into `aclocal.m4' libtoolize complains only about
+	the macro files that are missing or not up-to-date.
+	* libtoolize.m4sh (func_echo_once): New function that prints
+	the contents of a named variable only on the first call.
+	(func_aclocal_update_check): New function that compares serial
+	numbers of libtool macros in aclocal.m4 and only diagnoses the
+	missing files.
+	(func_copy, func_copy_cb, func_copy_some_files, func_serial_update)
+	(func_keyword_update, func_ltmain_update, func_config_update)
+	(func_install_update): Accept a new argument naming a variable
+	containing a header string to print with func_echo_once iff any
+	body text is output by this function.
+	(func_install_pkgmacro_subproject, func_install_pkgmacro_parent)
+	(func_install_pkgltdl_files, func_install_pkgconfig_subproject)
+	(func_install_pkgconfig_parent: Set and pass a suitable
+	header string variable for the above functions.
+	(func_serial_update_check): Don't advise rerunning `libtoolize
+	--force' when aclocal.m4 is not m4_including libtoolize installed
+	macro files.
+	* tests/testsuite.at (_LIBTOOLIZE_TRANSFORM): Transform generic
+	/usr/local/share/aclocal paths to point into the uninstalled
+	libtool macro directory.
+	* tests/libtoolize.at: Update tests that were checking for old
+	behaviour of outputing `file is already up to date' even when
+	--force was not passed.
+	* tests/libtoolize.at: New tests to prevent regressions of these
+	smarter messages.
+	* NEWS: Updated.
+	Reported by Olly Betts <olly@survex.com>
+
+	Capture lt~obsolete.m4 serial number correctly in libtoolize.
+	* libltdl/m4/lt~obsolete.m4: Add the filename to the #serial
+	marker so that libtoolize's serial number checks can find it
+	in a non-include using aclocal.m4.
+	* NEWS: Updated.
+	Reported by Olly Betts <olly@survex.com>
+
+	Allow better compile time type checking for lt_dladvise.
+	* libltdl/lt__private.h (lt__handle, lt__advise): Typedefs
+	removed in favour of...
+	* libltdl/ltdl.h (lt_dlhandle),
+	libltdl/libltdl/lt_dlloader.h (lt_dladvise): ...changing from
+	void* to forward declarations.
+	* libltdl/loaders/dlopen.c, libltdl/loaders/loadlibrary.c,
+	libltdl/lt_dlloader.c, libltdl/ltdl.c: Remove many redundant
+	type casts.
+	* NEWS: Updated.
+	Suggested by Bob Friesenhahn <bfriesen@simple.dallas.tx.us>
+
+2008-04-21  Peter O'Gorman  <peter@pogma.com>
+
+	basename does not take a list of strings.
+	* libltdl/config/ltmain.m4sh(func_extract_archives): Use sed
+	$basename.
+	* tests/darwin.at: New. Check that we can built fat program,
+	shared library and convenience library.
+	* Makefile.am: Add test.
+	Reported by LiKai Liu <liulk@cs.bu.edu>
+
+	Use AC_CHECK_TOOL for lipo too.
+	* libltdl/m4/libtool.m4 (_LT_REQUIRED_DARWIN_CHECKS): Check.
+	* libltdl/config/ltmain.m4sh (func_extract_archives): Use.
+
+2008-04-20  Gary V. Vaughan  <gary@gnu.org>
+
+	Fix misleading lt_dlopenadvise documentation.
+	* doc/libtool.texi (lt_dlopenadvise): The last parameter is of
+	type lt_dladvise, not lt_dladvise*.
+	(my_dlopenext): Correct the example too.
+	* NEWS: Updated.
+	Reported by Gary Kumfert <kumfert@llnl.gov>
+
+2008-04-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix testsuite cleanup warnings on AIX with NFS.
+	* tests/testsuite.at [ aix ]: Set file mode creation so that
+	'others' have no permissions.  Shared libraries are kept in
+	memory on AIX after use if they are world-readable, which means
+	on NFS mounts cleanup of test group directories will fail later.
+	* THANKS: Update.
+	Report and analysis by Michael Haubenwallner.
+
+	Fix nonportable use of expr.
+	* libltdl/config/ltmain.m4sh (func_mode_link) <Transforming
+	deplibs into only shared deplibs>: Fix expr portability issues,
+	noted on FreeBSD.  While at it, simplify and avoid forking.
+	Report by Bob Friesenhahn.
+
+	Exploit shell arithmetic expansion and ${#var}.
+	* libltdl/m4/libtool.m4 (_LT_CHECK_SHELL_FEATURES): Also check
+	for arithmetic expansion, and ${#var}.
+	(_LT_PROG_XSI_SHELLFNS): Define func_arith and func_len
+	accordingly, falling back on 'expr'.  Note that the argument to
+	func_len may not start with a hyphen.  In the pre-Posix
+	fallback, take care not to rely on the exit status of the
+	variable assignment (not portable), but set the length to
+	$max_cmd_len instead.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Use func_arith
+	and func_len throughout for integer arithmetic, fixing
+	quadratical amount of counting for reloadable object and
+	piecewise archive linking.  Change all comparisons with
+	max_cmd_len to test for smaller, non-equal length.
+	* THANKS: Update.
+	Suggested by Roland Mainz.
+
+	* libltdl/config/ltmain.m4sh (func_mode_compile): Avoid
+	redundant removal of old output files before compilation.
+	Do not remove $obj until we have successfully grabbed the
+	lockfile (in case the compiler doesn't grok `-c -o'), because
+	it might be identical to $output_obj.
+	At the end of the function, before we remove the lockfile,
+	update $removelist so that if the trap hits after the lockfile
+	has been removed, we do not accidentally remove $output_obj that
+	does not belong to us.
+	(func_write_libtool_object): Use $MV instead of mv.
+
+2008-04-18  Andreas Schwab  <schwab@suse.de>
+
+	* libltdl/m4/ltoptions.m4 (AC_ENABLE_SHARED): Check optional
+	argument.
+	(AC_ENABLE_STATIC): Likewise.
+	(AC_ENABLE_FAST_INSTALL): Likewise.
+
+2008-04-16  Eric Blake  <ebb9@byu.net>
+
+	Make ChangeLog merges easier.
+	* .gitattributes: New file.
+	* HACKING: Mention how it helps.
+
+2008-04-15  Peter O'Gorman  <peter@pogma.com>
+
+	Allow bootstrap from git repository.
+	* Makefile.am: Pass srcdir as an argument to mkstamp and expect
+	only 2 fields in mkstamps output.
+	* clcommit.m4sh: Ditto.
+	* configure.ac: Ditto.
+	* libltdl/config/mkstamp: return a revision and date based on
+	the number of lines which look like dates in all the ChangeLog*
+	files in the directory we got as arg 1.
+
+2008-04-11  Eric Blake  <ebb9@byu.net>
+
+	Fix usage of setmode without declaration on cygwin.
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src): Ensure
+	setmode has prototype for both mingw and cygwin.
+
+2008-04-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Move non-XSI
+	definition of func_dirname_and_basename ...
+	* libltdl/config/general.m4sh (func_dirname_and_basename):
+	... here, to use it for the other scripts that use general.m4sh
+	(and as portable fallback for libtool).  Add marker for early
+	insertion of generated shell functions (into libtool, not the
+	other scripts) here.
+	Use func_dirname_and_basename to compute progname, progpath.
+	* libltdl/config/ltmain.m4sh (func_mode_help): Remove marker
+	for insertion of generated shell functions.
+	* tests/sh.test: Adjust function definition test to not match
+	function call.
+
+	* libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS) <func_xform>:
+	New function.
+	* libltdl/config/ltmain.m4sh (func_mode_compile): Use it to
+	avoid two forks with XSI shells.
+	* tests/suffix.test: Also test a file with multiple dots.
+
+2008-04-10  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/config/ltmain.m4sh (func_win32_libid,
+	func_generate_dlsyms, func_extract_an_archive,
+	func_extract_archives, func_mode_help): move these so they
+	appear after func_mode_compile.
+	* tests/nomode.test: Check that --mode=link --help works.
+	Reported by Josh Triplett <josh@freedesktop.org>
+
+2008-04-07  Gary V. Vaughan  <gary@gnu.arg>
+
+	* doc/libtool.texi (Libltdl interface): Add missing
+	documentation for lt_dlopenavise.
+	Reported by Anton Erti <anton@mips.complang.tuwien.ac.at>
+
+	* configure.ac, libltdl/configure.ac (AM_INIT_AUTOMAKE): Use
+	gnu rather than gnits standards so that version number 2.2.3a
+	is not rejected!
+	Reported by Olly Betts <olly@survex.com>
+
+2008-04-01  Gary V. Vaughan  <gary@gnu.arg>
+
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.3a.
+
+	GNU Libtool 2.2.2 was released.
+
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.2.
+	* libltdl/Makefile.in (LTDL_VERSION_INFO): C:R+1:A because the
+	interfaces are unchanged, even though we improved the code some
+	more.
+	* NEWS: Updated.
+
+	* libltdl/m4/libtool.m4, libltdl/m4/ltdl.m4,
+	libltdl/m4/ltoptions.m4: Bump serial numbers to account for
+	changes since 2.2 release.
+
+2008-03-27  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 [_LT_REQUIRED_DARWIN_CHECKS]: Fix the
+	test for -single_module and log it to config.log.
+	Reported by Torok Edwin and Nigel Home.
+
+2008-03-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Document that disable-static plus -all-static is not portable.
+	* doc/libtool.texi (Link mode): -all-static does not go well
+	with disable-static on most systems.
+	* tests/static.at (static linking flags for programs) [!aix]:
+	With --disable-static but nonempty link_static_flag, skip the
+	m-all-static link.  Do not skip it on AIX, as there the
+	enable_static is self-inflicted, and thus expected to work.
+	* THANKS: Update.
+	Report by Nix.
+
+2008-03-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_CHECK_BUILDDIR): No need to escape
+	backticks in argument to AC_MSG_WARN or AC_MSG_ERROR.
+	* libltdl/m4/ltdl.m4 (_LTDL_INSTALLABLE, LTDL_INIT): Likewise.
+
+2008-03-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (NLS nuisances): Fix quoting of
+	localization variables for shell-active characters.
+	* tests/localization.at (localized compiler messages): Extend
+	test.
+	* THANKS: Update.
+	Report by Mike Frysinger.
+
+2008-03-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/defs.m4sh (func_get_config): Build egrep regex to speed
+	up extracting several variables at once.  Use it to extract all
+	default variables at once.  Also extract build_alias and
+	host_alias from the libtool script.
+	(func_configure_nofail): Use build_alias and host_alias for
+	--build and --host, respectively.  Pass each if nonempty.
+	* tests/testsuite.at: Pass --build if build_alias is nonemtpy.
+	* tests/quote.test: Extract ECHO and wl at once.
+
+	* libltdl/m4/ltoptions.m4 (AC_LIBTOOL_WIN32_DLL): Require
+	AC_CANONICAL_HOST.
+	* THANKS: Update.
+	Report by Jakub Bogusz.
+
+2008-03-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* NEWS: Update.
+
+2008-03-12  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src) [file
+	scope]: additional #includes and #defines to support...
+	(func_emit_cwrapperexe_src) [main]: ensure stdout is set to
+	binary mode for cygwin|mingw builds. Ensure temporary script
+	file is written in binary mode for cygwin|mingw builds.
+	(func_mode_link) [cygwin|mingw]: cross-build support - only
+	use cwrapper to generate shell wrapper if building native;
+	otherwise use func_emit_wrapper()
+
+2008-03-12  Henning Nielsen Lund  <hnl_dk@amigaos.dk>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_COMPILER_PIC, _LT_LINKER_SHLIBS) [amigaos]: Port to
+	AmigaOS4 shared libraries on powerpc.
+	* libltdl/m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS) [amigaos]:
+	Likewise.
+	* THANKS, NEWS: Update.
+
+2008-03-09  Bruno Haible  <bruno@clisp.org>
+	and Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix compiler output to be in the user locale.
+	* libltdl/config/general.m4sh (func_show_eval_locale): New
+	function, for running commands in the user locale.
+	* libltdl/config/ltmain.m4sh (func_mode_compile): Use it for
+	compiling.
+	* tests/localization.at (localized compiler messages): New test.
+	* Makefile.am: Adjust.
+	Report by Bruno Haible.
+
+2008-03-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix several test failures on Cygwin and MinGW.
+	* tests/nonrecursive.at: Use -no-undefined for foo.la.
+	* tests/recursive.at: Likewise.
+	* tests/subproject.at: Likewise.
+	* tests/lt_dladvise.at: For systems where undefined symbols are
+	not allowed, to not try to load the module libdepend.
+	[ mingw ]: Add to list of such systems.
+	* tests/testsuite.at (_LT_AT_TRANSLATE_TEXT_OUTPUT): New macro,
+	to translate line ending of expout and experr files suitable for
+	host executables.
+	(LT_AT_CHECK, LT_AT_NOINST_EXEC_CHECK): Use it.
+	Report by Bob Friesenhahn.
+
+	Fix installcheck dependencies, fix for --program-transform-name.
+	* Makefile.am (installcheck-local): Depend upon tests/atconfig
+	and $(srcdir)/$(TESTSUITE).
+	* tests/testsuite.at (_LIBTOOLIZE_TRANSFORM): New macro.
+	(LT_AT_CHECK_LIBTOOLIZE): Use it to transform expout and experr
+	files suitably.
+	* HACKING: Update.
+
+	Drop usage of obsolete macros AC_EXEEXT and AC_OBJEXT.
+	* libltdl/m4/libtool.m4 (_LT_ENABLE_LOCK, _LT_COMPILER_OPTION)
+	(_LT_COMPILER_C_O, LT_PATH_NM, _LT_CMD_GLOBAL_SYMBOLS, _LT_SETUP):
+	Drop usage of obsolete AC_OBJEXT and AC_EXEEXT.
+	* tests/am-subdir.at (C++ subdir-objects): Likewise.
+
+2008-03-07  Peter O'Gorman  <peter@pogma.com>
+
+	* tests/convenience.at (Java convenience archives): Skip test if
+	gcj cannot compile a working executable from .java files.
+	Report by Nelson H. F. Beebe.
+
+	* libltdl/m4/libtool.m4 (_LT_LANG_GCJ_CONFIG): Need to set LD.
+	Reported by Nelson H. F. Beebe.
+
+2008-03-06  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 (_LT_PROG_FC): Undo commit - bad idea.
+
+	* libltdl/m4/libtool.m4 (_LT_PROG_FC): Report FC=no if the FC
+	compiler is not a GNU compiler and the CXX compiler is a GNU
+	compiler.
+	Reported by Nelson H. F. Beebe.
+
+2008-03-06  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.maint (TSDEPS_DIST): Removed.  No longer used.
+	(TSDEPS): libtool.m4 has long since moved to libltdl.
+	(cvs-dist): Don't put the suffix dot in twice.
+
+2008-03-06  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/convenience.at (Java convenience archives): Skip test if
+	gcj cannot compile a .java file.
+	Report by Nelson H. F. Beebe.
+
+2008-03-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_lalib_unsafe_p): redirect
+	and restore from stdin, not stdout.
+	* tests/execute-mode.at (execute mode): Adjust test to catch
+	this.
+	Report by Roberto Bagnara.
+
+2008-03-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix libltdl to not skip dlopen on systems with several loaders,
+	such as HP-UX, Cygwin.
+	* libltdl/slist.c (slist_concat): When appending to the tail
+	of a list, do not drop items off the beginning of the list.
+	* NEWS: Update.
+
+	* libltdl/config/ltmain.m4sh (func_mode_execute): Replace only
+	arguments we have identified as shell or C wrappers.
+	(func_emit_wrapper): Output error message on stderr.
+	* tests/execute-mode.at: New file, with --mode=execute tests.
+	* Makefile.am: Adjust.
+	* NEWS: Update.
+	Fixes 2.2 regression.  Report by Roberto Bagnara.
+
+	* libltdl/m4/libtool.m4 (_LT_CONFIG): Drop misleading `GNU'
+	prefix before the host package name in the "Generated by" line
+	for the libtool script.
+	* THANKS: Update.
+	Reports by Peter Rosin and Roberto Bagnara.
+
+	* doc/libtool.texi (Module loaders for libltdl): Fix typo.
+
+	* libltdl/loaders/dld_link.c (vl_exit): New function, zero out ...
+	(vtable): ... this new file static variable split out from ...
+	(get_vtable): ... here.  Initialize vtable, register vl_exit as
+	dlloader_exit function.
+	* libltdl/loaders/dlopen.c: Likewise.
+	* libltdl/loaders/dyld.c: Likewise.
+	* libltdl/loaders/load_add_on.c: Likewise.
+	* libltdl/loaders/loadlibrary.c: Likewise.
+	* libltdl/loaders/shl_load.c: Likewise.
+	* libltdl/loaders/preopen.c: Likewise; vl_exit existed here
+	already.
+	* tests/lt_dlexit.at (lt_dlexit unloading libs): Update test.
+	* NEWS: Update.
+	Report by Andreas Schwab.
+
+2008-03-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.3a.
+
+	GNU Libtool 2.2 was released.
+
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.
+	* NEWS: Updated.
+
+	* tests/lt_dladvise.at, tests/lt_dlexit.at,
+	tests/need_lib_prefix.at: Skip these tests when called from
+	`make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install'.
+	The tests try to link against the dummy installed libltdl.la
+	from .../_inst/lib/libltdl.la, which does not exist when
+	configured with --disable-ltdl-install.
+
+2008-02-29  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/m4/argz.m4 (AC_CHECK_FUNCS): Also use our replacement
+	argz if the system argz_add or argz_count are missing.
+	Report by Juan Manuel Guerrero <juan.guerrero@gmx.de>.
+
+2008-02-26  Karl Berry  <karl@freefriends.org>
+
+	* libltdl/argz.c (argz_add, argz_count): New functions.
+	* libltdl/argz_.h: Declare them.
+	Report by Juan Manuel Guerrero <juan.guerrero@gmx.de>.
+
+2008-02-20  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 (_LT_LANG_GCJ_CONFIG): Do not call the
+	_LT_SYS_DYNAMIC_LINKER macro here.
+	Reported by Mike Frysinger <vapier@gentoo.org>
+
+2008-02-15  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_HIDDEN_LIBDEPS): Fix typo.
+
+2008-02-14  Peter Breitenlohner  <peb@mppmu.mpg.de>
+
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER): better handling
+	of predefined values for lt_cv_sys_lib_search_path_spec and
+	lt_cv_sys_lib_dlsearch_path_spec.
+
+2008-02-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libtoolize.m4sh (func_install_pkgconfig_files): Only call
+	func_install_pkgconfig_parent if $seen_autoconf.
+	* tests/standalone.at (compiling softlinked libltdl)
+	(compiling copied libltdl, installable libltdl)
+	(linking libltdl without autotools): Use checked libtoolize
+	calls to catch warnings.
+
+2008-02-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/configure.ac: Bump package version.
+	* HACKING: Reminder to do it next time, too.
+
+2008-02-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/mdemo/Makefile.am (@LIBLTDL@): Update outdated
+	dependencies.
+	($(top_distdir)/libltdl/libtool): Remove.
+	Fixes spurious mdemo-dryrun failure with OpenBSD make.
+
+2008-02-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux] <ifort>:
+	Treat like icc and ecc, for fixed `-Wl,' and `-KPIC' settings.
+
+2008-02-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/archive-in-archive.at
+	(static library contains static library): Test also the actual
+	broken link command, and the following install command, as
+	UnixWare ar rightly refuses to put an archive into an archive.
+	Report by Tim Rice.
+
+2008-02-06  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/ltoptions.m4 (_LT_SET_OPTIONS): Only set default
+	LT_INIT values for LT_INIT, not LTDL_INIT.
+	Reported by Jochem Huhmann <joh@revier.com>
+
+2008-02-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/testsuite.at (LT_AT_TAG): For the CXX tag, if $CXX is
+	g++, check that `g++ -v' works; AC_PROG_CXX may have set that
+	as default value even if it found no C++ compiler.
+	Report by Andreas Schwab.
+
+2008-02-02  Gary V. Vaughan  <gary@gnu.org>
+
+	* libltdl/Makefile.inc (EXTRA_DIST): Now that we're not using
+	Autoconf's AC_SOURCES macro, Automake can't trace our extra
+	source files argz, lt__dirent.c and lt__strl.c.  List them
+	manually here to make sure they are distributed.
+	* NEWS: Updated.
+	Reported by Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+2008-02-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* configure.ac (AC_INIT): Bump version number to 2.1c.
+
+	GNU Libtool 2.1b was released.
+
+	* configure.ac (AC_INIT): Bump version number to 2.1b.
+	* libltdl/Makefile.inc (LTDL_VERSION_INFO): Increment to account
+	for new interfaces since the last libltdl update.
+	* HACKING (Release Procedure): Note that LTDL_VERSION_INFO is now
+	kept in libltdl/Makefile.inc.
+
+2008-02-01  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/cdemo, tests/depdemo, tests/fcdemo, tests/pdemo,
+	tests/demo, tests/f77demo, tests/mdemo, tests/tagdemo
+	(distclean-local): Remove compiler file droppings left by
+	Autoconf tests that prevent make dist from finishing on
+	several machines including Mac OS 10.5.
+
+2008-02-01  Gary V. Vaughan  <gary@gnu.org>
+
+	Unfortunately, the autoconf implementation of AC_LIBOBJ and
+	friends requires all libobjs to be in the same directory, as
+	declared by AC_CONFIG_LIBOBJ_DIR.  That might prevent using
+	either recursive or nonrecursive libltdl if the parent project
+	has libobjs of its own, except that this patch tracks libltdl's
+	libobjs in another namespace:
+
+	* libltdl/m4/ltdl.m4 (_LT_LIBOBJ, _LT_LIBSOURCES): Versions of
+	AC_LIBOBJ and AC_LIBSOURCES that save missing sources in a
+	ltdl_LIBOBJS automake macro, instead of the global LIBOBJS
+	automake macro.  Content of the macros inspired by code from
+	gnulib-tool.
+	(_LTDL_MODE_DISPATCH): Initialise lt_libobj_prefix in
+	nonrecursive mode.
+	(LTDL_INIT): Push and pop the new definitions around potential
+	sites that call AC_LIBOBJ.  Also, using lt_libobj_prefix,
+	initialise ltdl_LIBOBJS and ltdl_LTLIBOBJS.
+	* libtoolize.m4sh (func_fixup_Makefile): Substitute ltdl_LIBOBJS
+	and ltdl_LTLIBOBJS for LIBOBJS and LTLIBOBJS during copying
+	either Makefile.am or Makefile.inc, depending on ltdl_mode.
+	Reported by Eric Blake <ebb9@byu.net>
+
+2008-01-30  Gary V. Vaughan  <gary@gnu.org>
+
+	There are 5 distinct batches of files that libtoolize might
+	install into a project, depending on whether libltdl is
+	being installed in subproject mode, and in that case whether
+	the parent project shares the config and macro directories
+	with the subproject ltdl.  Make a separate function for each
+	of those 5 batches (4 new functions below, plus the recently
+	factored func_install_pkgltdl_files), and make a clearer
+	distinction between when each of them is needed:
+
+	* libtoolize.m4sh (func_install_pkgmacro_subproject):
+	New function for installing and reporting on m4 files copied
+	to a subproject ltdl directory.
+	(func_install_pkgmacro_parent): Similar new function for m4
+	files copied solely for the use of the parent project,
+	including serial checking.
+	(func_install_pkgconfig_subproject): New function for
+	installing and reporting on config helper files copied to a
+	subproject ltdl directory.
+	(func_install_pkgconfig_parent): Similar new function for
+	config helper files copied solely for the use of the parent
+	project, including serial checking.
+	(func_install_pkgmacro_files, func_install_pkgconfig_files):
+	Rewritten in terms of the above functions.
+	* tests/libtoolize.at: Adjust test expout's to match newly
+	regularized libtoolize output.
+	Move parent project pkgconfig files to build-aux directory
+	so that progress messages show an obvious difference to
+	pkgconfig files installed to subproject `config' directory.
+	(nonrecursive ltdl with AC_CONFIG_MACRO_DIR): New test.
+	(diagnose missing LT_CONFIG_LTDL_DIR): New test.
+	(subproject ltdl with non-shared directories): New test.
+	Reported by Eric Blake <ebb9@byu.net>
+
+2008-01-29  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 [darwin]: Changes to glob pattern matching
+	to be safer.
+
+	Search the compiler path too.
+	* libltdl/m4/libtool.m4 (compiler_lib_search_dirs): New variable.
+	* libltdl/config/ltmain.m4sh: Use it.
+	Reported by Maynard Johnson
+
+2008-01-28  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_check_macros): Correct typo with
+	'$opt_quiet ||' where '$opt_quiet &&' that was preventing
+	func_check_macros from running!
+
+	* libtoolize.m4sh: Set opt_ltdl whenever seen_ltdl is set
+	so that libtoolize behaves as though --ltdl was passed even
+	if it wasn't as long as LTDL_INIT (or equivalent) was seen
+	in configure.ac.  Adjust redundant '$opt_ltdl || $seen_ltdl'
+	to simply '$opt_ltdl'.
+	Reported by Eric Blake <ebb9@byu.net>
+
+	* libtoolize.m4sh (func_check_macros): Check opt_quiet
+	in the function itself to simplify calling it.  Also move
+	the definition of the function.
+
+	* libtoolize.m4sh (func_scan_files): Be sure to set the
+	default libltdl mode to 'subproject' when libtoolize is
+	executed before configure.ac has been updated.
+
+2008-01-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (func_install_pkgconfig_files)
+	(func_install_pkgmacro_files, func_install_pkgltdl_files):
+	Factored out from the 'Main' section of the file.
+
+	* libtoolize.m4sh (subproject_auxdir, subproject_macrodir):
+	New variables to hold the default locations for auxfiles
+	and macrofiles in a subproject libltdl.
+	(ac_auxdir, ac_macrodir): New variables to hold the values
+	passed by AC_CONFIG_AUX_DIR and AC_CONFIG_MACRO_DIR resp.
+	(auxdir, macrodir): Adjust to contain the values to be
+	used by libtoolize at runtime.
+
+	* libtoolize.m4sh (func_fixup_Makefile)
+	(func_massage_aclocal_DATA, func_massage_pkgltdl_files)
+	(func_massage_pkgconfig_files): Add missing $opt_debug.
+
+2008-01-27  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize (func_fixup_Makefile, func_massage_aclocal_DATA)
+	(func_massage_pkgltdl_files, func_massage_pkgconfig_files):
+	Add missing $opt_debug.
+
+2008-01-26  Gary V. Vaughan  <gary@gnu.org>
+
+	* libtoolize.m4sh (Main): Copy (or link) libltdl sources
+	into project tree when LTDL_INIT was seen, whether or not
+	`--ltdl' is passed.
+	(func_check_macros): Recommend LTDL_INIT instead of
+	LT_WITH_LTDL when `--ltdl' is used before configure.ac is
+	upgraded.
+	* tests/libtoolize.at: Test that it works.
+	(_LT_AT_LTDL_SETUP): Factor out some common test setup.
+	Reported by Eric Blake <ebb9@byu.net>
+
+2008-01-24  Peter O'Gorman  <peter@pogma.com>
+
+	* doc/notes.texi: Fix errors in previous commit.
+
+	* libltdl/m4/libtool.m4 (sys_lib_search_path_spec,
+	sys_lib_dlsearch_path_spec): Allow for a cache variable
+	lt_cv_sys_lib_... to set these at configure time.
+	* doc/notes.texi: Short note about the above change.
+
+2008-01-24  Eric Blake  <ebb9@byu.net>
+
+	Add proper quoting to doc examples.
+	* doc/libtool.texi: Use m4 quotes where appropriate.
+	(Test descriptions): Fix truncated sentence.
+
+2008-01-18  Gary V. Vaughan  <gary@gnu.org>
+
+	* Makefile.am (DISTCLEANFILES): Remove libtool.dvi generated
+	by 'make dvi'.
+
+2008-01-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libtoolize.m4sh (func_scan_files): Avoid matching our own
+	macro code when scanning configure.ac and aclocal.m4.
+	Don't produce spurious output if AC_PROG_RANLIB is found.
+	* tests/old-m4-iface.at (AM_PROG_LIBTOOL): Add a (weak) check
+	that we don't match our own macro code when searching for user
+	code calling us.
+	* TODO: Updated.
+
+2008-01-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	New variable LTDLDEPS for use in output_DEPENDENCIES.
+
+	* libltdl/m4/ltdl.m4 (_LTDL_CONVENIENCE, _LTDL_INSTALLABLE)
+	(LTDL_INIT): Set and substitute LTDLDEPS according to chosen
+	method.
+	* tests/configure-iface.at (installable libltdl)
+	(--with-ltdl-include/lib, --with-included-ltdl): Test it.
+	* doc/libtool.texi (Distributing libltdl): Document LTDLDEPS.
+	* NEWS: Updated.
+	Dependency bug exposed by Eric Blake in M4, found by Bob Proulx
+	build daemon.
+
+2008-01-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Distributing libltdl): Clarify that
+	`${top_build_prefix}' may be used in place of `${top_builddir}/'.
+
+	* doc/libtool.texi (Distributing libltdl): Clarify that
+	LTDL_INIT goes after LT_INIT; also show the latter in the
+	respective examples.
+	* tests/subproject.at: Adjust order.
+
+2008-01-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltdl.m4 (_LT_ENABLE_INSTALL): Use AM_CONDITIONAL
+	only if defined.  Allows to use libltdl without aclocal.
+
+2008-01-16  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4: Set GCC var for every tag, avoids need
+	to set withGCC var.
+
+2008-01-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* configure.ac: Set libltdl nonrecursive option, to avoid
+	configuring libltdl inside the Libtool package.
+
+2008-01-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Silence all non-warning output from `libtool --silent'.
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms)
+	(func_extract_archives, func_mode_link): Use func_verbose
+	instead of func_echo for all non-warning output.
+
+	* Makefile.maint (fetch): Update to match upstream git sources.
+	Pull `INSTALL' from gnulib instead of from Autoconf.
+
+	* doc/notes.texi: Mention AIX binutils deficiency for C++ code.
+	Report by Rainer Tammer.
+	Suggest using bash for configure.
+
+	* libltdl/m4/ltoptions.m4 (AC_ENABLE_SHARED): Fix to use
+	new _LT_SET_OPTION semantics.
+
+2008-01-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltdl.m4 (_LTDL_SETUP): Define
+	LTDL_DLOPEN_SELF_WORKS, depending upon lt_cv_dlopen_self.
+	* libltdl/loaders/dlopen.c (vm_open) [!LTDL_DLOPEN_SELF_WORKS]:
+	Fail for dlopen(NULL), so that the preopen loader is used.  This
+	fixes mdemo-exec.test failures on AIX where dlopen(NULL)
+	succeeds but dlsym resolves no symbol.
+	* NEWS: Update.
+	Report by Rainer Tammer.
+
+	* tests/am-subdir.at: Drop unused variables.
+	* tests/configure-iface.at: Likewise.
+	* tests/ctor.at: Likewise.
+	* tests/early-libtool.at: Likewise.
+	* tests/lt_dladvise.at: Likewise.
+	* tests/old-m4-iface.at: Likewise.
+	* tests/lt_dlexit.at: Likewise.  Also drop unused functions.
+
+	* tests/old-m4-iface.at (AM_PROG_LIBTOOL): Also copy needed
+	lt~obsolete.m4.
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): Fix warning
+	about -l and -L for archives and objects as output, to not
+	trigger for *.la files.  Non-convenience archives are diagnosed
+	later on.
+
+	* tests/configure-iface.at: Ensure LTDLINCL is expanded
+	before CPPFLAGS, so that even CPPFLAGS=-I/usr/local/include
+	won't make the tests prefer an installed ltdl.h over the
+	in-package one.
+	* tests/lt_dladvise.at, tests/lt_dlexit.at: Likewise.
+	* tests/need_lib_prefix.at, tests/old-m4-iface.at: Likewise.
+	Report by Bob Friesenhahn.
+
+2008-01-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) <exclude_expsyms>:
+	Also exclude `_GLOBAL__F[ID]_.*'.  Also set for the C++ tag.
+	Fixes esp. demo/helldl build failure with GCC on AIX.
+	Report by Rainer Tammer.
+
+2008-01-11  Peter O'Gorman  <peter@pogma.com>
+
+	* libltdl/m4/libtool.m4 [darwin]: Reorganize darwin support, use
+	dsymutil if it is available so that debugging is possible, check
+	for nmedit and dsymutil with AC_CHECK_TOOL, use the linker flag
+	-exported_symbols_list in preference to nmedit if it is available.
+	Drop support for xlc, it is probably broken.
+	* tests/template.at [darwin]: Skip this test, I can not find a way
+	to make it work on darwin9 with Xcode-3.0.
+	* NEWS: Note the dropping of xlc support.
+
+2008-01-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/libtool.m4 (LT_INIT): m4_require, not AC_REQUIRE
+	_LT_CHECK_BUILDDIR, as it's m4_defun'ed, not AC_DEFUN'ed.
+	Report by Peter O'Gorman.
+
+	* libltdl/m4/ltdl.m4 (_LTDL_INSTALLABLE): Restore correct
+	_LT_BUILD_PREFIX-using code.
+
+2008-01-08  Gary V. Vaughan  <gary@gnu.org>
+
+	* tests/recursive.at: Remove bogus --debug option.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* tests/configure-iface.at: Build libltdl in a subdir so that
+	it can be easily removed without trying to remove config.log
+	on windows (which can't delete a file until it is closed).
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltdl.m4 (LTDL_INSTALLABLE): Use _LT_BUILD_PREFIX
+	instead of ${top_builddir} for Autoconf-2.62.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/m4/ltdl.m4 (_LT_CONFIG_LTDL_DIR): Correct closing
+	comment.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	* NEWS: Grammar nit.
+
+	* tests/configure-iface.at, tests/nonrecursive.at,
+	tests/recursive.at, tests/subproject.at (_LTDL_SETUP):
+	Renamed to _LT_AT_LTDL_SETUP to avoid a nameclash with
+	libltdl/m4/ltoptions.m4:_LTDL_SETUP from yesterday's patch.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+2008-01-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* tests/runpath-in-lalib.at (Runpath in libtool library files):
+	Compile program file without libtool.
+	Report by Rainer Tammer.
+
+2008-01-07  Rainer Tammer  <tammer@tammer.net>  (tiny change)
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Support AIX 6.1.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_C_CONFIG, _LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG)
+	(_LT_LANG_FC_CONFIG): Adjust case patterns to match AIX 6
+	through 9 as well.
+	* libltdl/m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS): Likewise.
+	* NEWS: Update.
+	* THANKS: Update.
+
+2008-01-07  Gary V. Vaughan  <gary@gnu.org>
+
+	Move libltdl build mode options from LT_CONFIG_LTDL_DIR to
+	LTDL_INIT.  Accept (optional) new 'convenience' and 'installable'
+	options in lieu of LTDL_CONVENIENCE and LTDL_INSTALL macros. And
+	also, implement --with-included-ltdl, --with-ltdl-lib and
+	--with-ltdl-include configure-time options:
+
+	* libltdl/m4/ltoptions.m4: Associate existing option settings with
+	LT_INIT.
+	(LT_OPTION_DEFINE): Associate options 'nonrecursive', 'recursive',
+	'subproject', 'installable' and 'convenience' with LTDL_INIT.
+	(_LT_MANGLE_OPTION, _LT_SET_OPTION, _LT_IF_OPTION)
+	(_LT_UNLESS_OPTIONS, _LT_SET_OPTIONS): Add MACRO-NAME argument to
+	support options to named macros instead of hardcoding only LT_INIT
+	options.
+	* libltdl/m4/ltdl.m4 (_LTDL_CONVENIENCE): Factor common code from
+	LTDL_CONVENIENCE and LTDL_INIT([convenience]).
+	(_LTDL_INSTALLABLE): Factor out common code from LTDL_INSTALLABLE
+	and LTDL_INIT([installable]).
+	(_LTDL_SETUP): Renamed from LTDL_INIT.  Support new configure-time
+	options: --with-included-ltdl, --with-ltdl-lib,
+	--with-ltdl-include.
+	(LTDL_CONVENIENCE, LTDL_INSTALLABLE): Adjust.
+	(LT_WITH_LTDL): Removed.
+	(LTDL_INIT): Parse caller options.
+	* libltdl/m4/libtool.m4 (LT_INIT): Declare that this macro must be
+	expanded before LTDL_INIT, and be sure to parse caller options.
+	* configure.ac: Call directly into internal _LTDL_SETUP macro.
+	* libtoolize.m4sh (func_scan_files): Ltdl mode argument moved from
+	LT_CONFIG_LTDL_DIR to LTDL_INIT.
+	* tests/nonrecursive.at, tests/recursive.at: Use new interfaces.
+	* tests/configure-iface.at: Test it.
+	* Makefile.am (TESTSUITE_AT): Add configure-iface.at.
+	* doc/libtool.texi (Distributing libltdl): Document improved
+	LTDL_INIT interfaces.
+	* NEWS: Updated.
+
+2008-01-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): When creating
+	reloadable object files, avoid issuing plain `rm -f' without
+	further arguments, even if the line length limit is ridiculously
+	low as in the `Run tests with low max_cmd_len' test.  This
+	failure is exposed on NetBSD.
+	Report by Patrick Welche.
+
+	* Makefile.am (EXTRA_DIST): Add ChangeLog.2007.
+	* ChangeLog.2007: New, rotated, from...
+	* ChangeLog: ...here.
+	* NEWS, README, README.alpha, Makefile.am, libtoolize.m4sh,
+	libltdl/config/getopt.m4sh, libltdl/config/ltmain.m4sh,
+	libltdl/m4/libtool.m4: Bump copyright years.
+
+Continued in ChangeLog.2007
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2009 b/ChangeLog.2009
new file mode 100644
index 0000000..0a43ab4
--- /dev/null
+++ b/ChangeLog.2009
@@ -0,0 +1,889 @@
+2009-12-30  Peter Rosin  <peda@lysator.liu.se>
+
+	* libltdl/ltdl.c (lt_dlerror): Remove meaningless conditional.
+
+2009-12-29  Peter Rosin  <peda@lysator.liu.se>
+
+	* libltdl/ltdl.c (file_not_found): Fix typos in code comment.
+
+2009-12-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Replace last __oline__ instance.
+	* libltdl/m4/libtool.m4 (_LT_TRY_DLOPEN_SELF): Replace last
+	__oline__ instance with $LINENO.
+
+2009-12-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Improve parsing of .la files in libltdl.
+	* libltdl/ltdl.c (trim): Do not dump core upon missing quote in
+	module .la file.
+	* tests/lalib-syntax.at (syntax of .la files): New file, new
+	test.
+	* Makefile.am (TESTSUITE_AT): Add tests/lalib-syntax.at.
+	Report by Bob Friesenhahn.
+
+2009-12-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Sane fallback initialization of $ECHO from $as_echo.
+	* libltdl/config/general.m4sh: Use 'printf %s\n' if $as_echo is
+	unset.
+	* tests/testsuite.at: Likewise.
+	* THANKS: Update.
+	Report by Vadim Zeitlin and Peter Rosin.
+
+2009-12-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	lt_dlloader_remove and lt_dlloader_find accept const arguments.
+	* libltdl/lt_dlloader.c (lt_dlloader_remove, lt_dlloader_find):
+	Accept `const char *' arguments, as documented.  Cast them to
+	`void *' for the slist machinery.
+	* libltdl/libltdl/lt_dlloader.h: Adjust prototypes.
+
+	Test and fix slist.c.
+	* libltdl/libltdl/slist.h: Include stddef.h, for size_t.
+	(slist_remove): Return pointer to SList, not void.
+	* libltdl/slist.c: Include stdlib.h, for malloc and free.
+	(slist_remove): Adjust prototype as above.
+	(slist_sort): Do not loop forever on one-item list.
+	* tests/slist.at (SList functionality): New file, new test.
+	* Makefile.am (TESTSUITE_AT): Add tests/slist.at.
+
+2009-11-30  Peter Rosin  <peda@lysator.liu.se>
+
+	Please C++ compilers when calling strrchr.
+	* libltdl/ltdl.c (has_library_ext): Match the return type of
+	strrchr with the first argument to please C++ compilers.
+	Report by Peter O'Gorman.
+
+2009-11-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix bindir and dlopen tests for C++ compilers (CC=g++).
+	* tests/bindir.at (bindir basic lib test, bindir install tests):
+	Include stdlib.h rather than declaring abort.
+	* tests/lt_dlopenext.at (lt_dlopenext error messages): Use
+	`extern "C"' annotation for dlsym'ed function in C++ mode.
+
+2009-11-25  Peter Rosin  <peda@lysator.liu.se>
+
+	Fix cross build issue in execute mode test.
+	* tests/execute-mode.at: Skip test for cross builds.
+
+2009-11-24  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Enable symbol versioning with the GNU gold linker.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS): Accept 'GNU gold'
+	in the version string.
+	* NEWS, THANKS: Update.
+	Report by Peter Fritzsche.
+
+	Tighten regex for Portland C++ compiler for version 10.
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG) [linux]:
+	Match a dot after version 1 through 5, so 10 and up don't match,
+	and use weak symbols.
+	* THANKS: Update.
+	Report by Jeff Squyres and Brent Leback.
+
+2009-11-16  Peter O'Gorman  <peter@pogma.com>
+
+	Update libltdl version to match 2.2.6b release.
+	* libltdl/Makefile.inc: Make version 9:1:2
+
+2009-11-14  Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	Don't load module.la from current directory by default.
+	* libltdl/ltdl.c (try_dlopen): Do not attempt to load an
+	unqualified module.la file from the current directory (by
+	default) since doing so is insecure and is not compliant with
+	the documentation.
+	* tests/testsuite.at: Qualify access to module.la file in
+	current directory so that test passes.
+
+2009-11-14  Peter O'Gorman  <peter@pogma.com>
+
+	Only use preopen loader to load preopened archives
+	* libltdl/ltdl.c: Limit checking of .a to preopen loader.
+	* tests/lt_dlopen_a.at: Add test.
+	* Makefile.am: Add test.
+
+2009-11-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Recognize `pgfortran' as Portland compiler.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS):
+	Accept `pgfortran*' too.
+	Report by Jeff Squyres.
+
+2009-11-04  Alexandre Oliva  <aoliva@redhat.com>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix verbose link extraction for multiply reconfigured GCC.
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG)
+	<output_verbose_link_cmd>: Drop GCC lines "Configured with" that
+	may contain unrelated flags.
+
+2009-11-02  Eric Blake  <ebb9@byu.net>
+
+	Allow gcc builds with -Wall -Werror.
+	* libltdl/ltdl.c (try_dlopen): Use strlen rather than LT_STRLEN on
+	an array that will never be NULL.
+
+2009-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix func_normal_abspath sed script for Solaris.
+	* libltdl/config/general.m4sh (pathcar, pathcdr, removedotparts)
+	(collapseslashes, finalslash): Use single quotes, for clarity.
+	(removedotparts): Avoid \{N,M\} after subexpression \(...\), for
+	Solaris /bin/sed.
+
+	Improve versioning algorithm documentation.
+	* doc/libtool.texi (Updating version info): Repeat the
+	algorithms in different, hopefully simpler terms.
+	* THANKS: Update.
+	Prompted by Richard B. Kreckel.
+
+2009-11-01  Ingo Weinhold  <ingo_weinhold@gmx.de>  (tiny change)
+
+	Support for the Haiku operating system.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Add cases for
+	`*-*-haiku*' alongside `*-*-beos*'.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_CHECK_MAGIC_METHOD, LT_LIB_M, _LT_COMPILER_PIC)
+	(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG): Add cases for
+	`haiku*'.
+	* NEWS, THANKS: Update.
+
+2009-11-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix quoting of AS, DLLTOOL, and OBJDUMP for the libtool script.
+	* libltdl/m4/ltoptions.m4 (AC_LIBTOOL_DLOPEN): Quote values of
+	$AS, $DLLTOOL, and $OBJDUMP, so they can contain arguments.
+	* THANKS: Update.
+	Report by Matthijs Kooijman.
+
+2009-09-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Initial support for the Cuda Compiler Driver on Linux.
+	* libltdl/config/ltmain.m4sh (func_mode_compile): Accept source
+	file extensions `.cu' and `.cup'.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_NO_RTTI, _LT_COMPILER_PIC)
+	(_LT_LINKER_SHLIBS): Support for `nvcc' compiler driver.
+	* NEWS, THANKS: Update.
+	Report by Mahesh Narayanamurthi.
+
+2009-09-12  Dave Korn  <dave.korn.cygwin@googlemail.com>
+
+	Control where win32 DLLs get installed.
+	* libltdl/config/general.m4sh (func_normal_abspath): New function.
+	(func_relative_path): Likewise.
+	* libltdl/config/ltmain.m4sh (func_mode_help): Document "-bindir".
+	(func_mode_link): Accept new "-bindir" option and use it, if
+	supplied, to place Windows DLLs.
+	* tests/bindir.at: New file for install tests using "-bindir".
+	* Makefile.am (TESTSUITE_AT): Add bindir.at.
+	* doc/libtool.texi (Link Mode): Update documentation.
+	* NEWS, THANKS: Update.
+
+2009-09-11  Akim Demaille  <demaille@gostai.com>
+
+	libtool: clean libconftest.a.
+	* libltdl/m4/libtool.m4 (_LT_REQUIRED_DARWIN_CHECKS): Here.
+
+2009-09-10  Peter Rosin  <peda@lysator.liu.se>
+
+	func_win32_libid doesn't work with MS dumpbin
+	* libltdl/m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD): The $NM
+	interface is assumed to be BSD nm in func_win32_libid, so
+	check for that before using it.
+
+2009-09-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Allow dlopen self test to work with gcc's -fvisibility=hidden.
+	* libltdl/m4/libtool.m4 (_LT_TRY_DLOPEN_SELF): Declare default
+	visibility for the symbol we are going to test dlopen (NULL)
+	when a GCC version is used that understands the visibility
+	attribute, under the assumption that if -fvisibility=hidden
+	will be used, the user code will be sufficiently annotated
+	for visibility of needed symbols from the main executable.
+	* THANKS: Update.
+	Report by Josh Hursey against OpenMPI.
+
+	Fix and split recent testsuite addition for compile/link flags.
+	* tests/flags.at (passing flags through libtool): Split into ...
+	(passing CC flags through libtool)
+	(passing CXX flags through libtool)
+	(passing F77 flags through libtool)
+	(passing FC flags through libtool)
+	(passing GCJ flags through libtool): ... these five tests,
+	factorized with m4_foreach.  Fix F77 and FC compile and link
+	commands; add GCJ tag.  Use LT_AT_TAG to correctly skip tags
+	for which no compiler exists.  Use $EXEEXT where appropriate.
+	Drop unneeded use of reload_cmds.
+	Reports by Peter Rosin and Peter O'Gorman.
+
+2009-09-07  Peter O'Gorman  <peter@pogma.com
+
+	Fix redirect in test case.
+	* tests/darwin.at: Fix stderr redirect.
+
+	Use darwin's -force_load flag if available for whole_archive_flag_spec
+	* libltdl/m4/libtool.m4 (_LT_REQUIRED_DARWIN_CHECKS): Check for
+	-force_load and use it if there.
+	* tests/darwin.at: Add a simple test.
+
+2009-09-06  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Testsuite keyword 'interactive' and check-* rules.
+	* Makefile.am (testsuite_deps, testsuite_deps_uninstalled):
+	New variables.
+	(check-local, installcheck-local): Use them.
+	(check-interactive, check-noninteractive): New rules.
+	* tests/link-order2.at (Link order of deplibs),
+	tests/static.at (static linking flags for programs): Add keyword
+	`interactive'.
+	* doc/libtool.texi (Test descriptions): Document all keywords
+	used in the Libtool test suite.
+	* NEWS: Update.
+
+	Fix failure test in the presence of --with-pic or -prefer-pic.
+	* tests/fail.at (Failure tests): Run non-PIC failure test only
+	if pic_mode is 'default' or 'no', rather than 'default' or 'yes'
+	and also -prefer-pic has not been passed in $CFLAGS.
+	* THANKS: Update.
+	Report by Donn Washburn.
+
+	Add testsuite exposure for passing of compiler and linker flags.
+	* tests/flags.at (passing flags through libtool): New file, new
+	test, for bug fixed in previous commit.
+	* Makefile.am (TESTSUITE_AT): Add tests/flags.at.
+
+2009-09-04  Peter Rosin  <peda@lysator.liu.se>
+
+	Make -Wc,FLAG behave like -Xcompiler FLAG in link mode.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Remove "-Wc,"
+	instead of replacing it with "$wl" when linking programs
+	through the compiler driver, just as is the case when linking
+	libraries.
+	* NEWS: Update.
+
+2009-08-23  Lennart Poettering  <lennart@poettering.net>  (tiny change)
+
+	Shut up prototype warnings with recent GCC and -Wstrict-prototypes.
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms): Use recent
+	GCC's diagnostic pragma to override a -Wstrict-prototypes
+	setting for the symbol list code.
+	* THANKS: Update.
+
+2009-08-23  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Remove __oline__ from macros, for less spurious configure diffs.
+	* libltdl/m4/libtool.m4 (_LT_ENABLE_LOCK, _LT_COMPILER_OPTION)
+	(_LT_COMPILER_C_O, LT_PATH_NM): Replace __oline__ instances with
+	$LINENO.
+	* NEWS: Update.
+
+2009-07-24  Roumen Petrov  <bugtrack@roumenpetrov.info>  (tiny change)
+
+	Fixup 'execute mode' test for w32.
+	* tests/execute-mode.at (execute mode): Add missing $EXEEXT.
+	(LDFLAGS): Add -no-undefined.
+
+2009-07-01  Yaakov Selkowitz  <yselkowitz@users.sourceforge.net> (tiny change)
+	    Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[CXX] Use correct export_dynamic_flag_spec for PE-COFF $hosts
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG) [cygwin*|mingw*|pw32*|cegcc*]:
+	Define export_dynamic_flag_spec as -Wl,--export-all-symbols here as well
+	(see commit 5f2bbb494a2753afb2878c399cfd8316b7403a5b).
+
+2009-06-29  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[mingw] Improve sys_lib_search_path_spec detection.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER): Fix handling
+	of dos-style paths when parsing $CC -print-search-dirs output.
+
+2009-06-28  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Finish adding alias for obsoleted AC_LIBTOOL_RC macro.
+	* libltdl/m4/libtool.m4: Add reminder comment concerning
+	aclocal-1.4 backwards compatibility.
+	* libltdl/m4/lt~obsolete.m4: Remove unnecessary AC_DEFUN.
+
+2009-06-27  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Add alias for obsoleted AC_LIBTOOL_RC macro.
+	* libltdl/m4/libtool.m4: Add alias for obsoleted
+	macro AC_LIBTOOL_RC.
+
+2009-06-21  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Remove unneeded functions and options from cwrapper
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src)
+	[lt_opt_process_env_set]: Remove.
+	[lt_opt_process_env_prepend]: Remove.
+	[lt_opt_process_env_append]: Remove.
+	[lt_split_name_value]: Remove.
+	[file scope]: Don't declare removed functions. Remove
+	constants and defines related to eliminated commandline
+	options.
+	[main]: Remove code related to eliminated commandline
+	options --lt-env-set, --lt-env-prepend, --lt-env-append.
+
+2009-06-19  Yaakov Selkowitz  <yselkowitz@users.sourceforge.net> (tiny change)
+	    Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Ensure LT_PATH_LD works when called before LT_INIT
+	* libltdl/m4/libtool.m4 (LT_PATH_LD): AC_REQUIRE _LT_PROG_ECHO_BACKSLASH.
+
+2009-06-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Add versioning tests.
+	* tests/versioning.at (versioning): New file, new test.
+	* Makefile.am (TESTSUITE_AT): Adjust.
+	Prompted by bug report from Mike Gorchak.
+
+2009-06-14  Mike Gorchak  <mike@malva.ua>  (tiny change)
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix versioning computation for QNX.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Set `$current'
+	and `$age' properly for version_type `qnx'.
+
+2009-06-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Avoid spurious localization testsuite failure on HP-UX/ia64.
+	* tests/localization.at (localized compiler messages): Skip test
+	if the compiler warning output contains `locale', for HP-UX.
+
+2009-06-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix concurrent extraction of convenience libraries on Darwin.
+	* libltdl/m4/libtool.m4 (_LT_CMD_OLD_ARCHIVE): New libtool
+	variable `lock_old_archive_extraction', set to `yes' on darwin.
+	* doc/libtool.texi (libtool script contents): Document it.
+	* libltdl/config/ltmain.m4sh (func_extract_an_archive): Lock
+	`ar x' invocation if `lock_old_archive_extraction' is yes.
+	* tests/darwin.at (darwin concurrent library extraction): New
+	test.
+	* NEWS: Update.
+	Report by Akim Demaille.
+
+2009-06-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix testsuite failure of lt_dlopenadvise test on FreeMiNT.
+	* tests/lt_dladvise.at (lt_dlopenadvise library loading): Do not
+	build moddepend for systems without shared libraries.
+	Report by Alan Hourihane.
+
+	testsuite: avoid failures due to old Automake.
+	* tests/configure-iface.at (installable libltdl)
+	(--with-ltdl-include/lib, --with-included-ltdl):
+	Speficy libmodule_la_SOURCES in Makefile.am as the default
+	source file naming scheme changed in Automake 1.8.
+	* tests/nonrecursive.at (_LT_AT_LTDL_SETUP): Require Automake
+	1.9.6.
+	* THANKS: Update.
+	Report by Robert Garron.
+
+	testsuite: add missing @LIBS@ in a link command line.
+	* tests/old-m4-iface.at (AC_WITH_LTDL): Use @LIBS@ when linking.
+	Report by Patrice Fromy.
+
+	testsuite: cope when some installed libltdl.la has been removed.
+	* tests/old-m4-iface.at (AC_WITH_LTDL): Pass --with-included-ltdl
+	to configure, to ensure we do not accidentally link against a
+	previously installed libltdl.so where the corresponding .la
+	file has been removed, thus we do not add a run path, and the
+	runtime linker then fails to find libltdl.so.7.
+	* tests/configure-iface.at (--with-ltdl-include/lib): Remove -L
+	flags from LDFLAGS to avoid picking up an installed libltdl
+	outside of the default locations.
+	* THANKS: Update.
+	Prompted by report from Patrice Fromy.
+
+2009-06-07  Vincent Torri  <vtorri@univ-evry.fr>  (tiny change)
+
+	Fix C wrapper invocation for ceGCC hosts (cegcc and mingw32ce).
+	* libltdl/config/ltmain.m4sh (func_mode_link): do not generate
+	C wrapper for cegcc and mingw32ce hosts.
+	(func_emit_cwrapperexe_src): remove useless check on
+	__MINGW32CE__.
+
+2009-06-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Don't pick up double-quotes from /etc/ld.so.conf on Ubuntu.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [ linux ]
+	<sys_lib_dlsearch_path_spec>: Remove embedded double quotes from
+	paths picked up from /etc/ld.so.conf.  Fixes libltdl compile
+	failure on Ubuntu 7.10.
+	* THANKS: Update.
+	Report by Camilo La Rota.
+
+2009-06-06  Richard Sandiford  <richards@transitive.com>
+
+	Fix GNU nm invocation for AIX.
+	* libldtl/m4/libtool.m4 (_LT_LINKER_SHLIBS)
+	<export_symbols_cmds>: Modify the GNU-nm-on-AIX version so that
+	it adds weak defined symbols to the export list.
+
+	Build AIX shared libraries with binutils 2.19.50+.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	<lt_use_gnu_ld_interface>: New variable to control whether the
+	GNU ld or native ld interface is used.  Set to "no" for GNU ld
+	2.19.50+ on AIX, otherwise mirror $with_gnu_ld.  Update the
+	warning message that is printed when using GNU ld on AIX.
+	Adjust the whole_archive_flag_spec value for GNU ld on AIX.
+	* NEWS, THANKS: Update.
+
+2009-05-27  Peter O'Gorman  <peter@pogma.com>
+
+	Don't run compiler checks twice.
+	libltdl/m4/libtool.m4 (_LT_PROG_FC, _LT_PROG_F77,
+	_LT_PROG_CXX): Remove these macros.
+	libltdl/m4/lt~obsolete.m4: Add removed macros here.
+	libltdl/m4/libtool.m4 (_LT_LANG_FC_CONFIG, _LT_LANG_F77_CONFIG,
+	_LT_LANG_CXX_CONFIG): Remove references to removed macros, and
+	move functionality here.
+	NEWS: Update.
+
+2009-05-05  Rainer Emrich  <r.emrich@de.tecosim.com>  (tiny change)
+	    Peter Rosin  <peda@lysator.liu.se>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix cross compilation for HPPA/64 with a BSD file command.
+	* libltdl/m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD)
+	[hpux10.20*, hpux11*, !ia64] <lt_cv_deplibs_check_method>:
+	Match the dot in `PA-RISC 2.0' literally.  Adjust hppa*64*
+	pattern to also match BSD `file' output, used in cross
+	compilation setups.
+	* THANKS: Update.
+	Report and initial patch by Rainer Emrich, refined by Peter
+	Rosin.
+
+2009-05-05  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	libtoolize: ignore trailing junk on scriptversion line.
+	* libtoolize.m4sh (func_install_update): Ignore semi-colon or
+	comment-sign and all following characters when parsing a
+	`scriptversion' line in one of the auxiliary scripts; recent
+	Automake-provided script have a stylized comment to induce
+	Emacs to use UTC.
+	Exposed by the `libtoolize config files serial update' test.
+
+2009-05-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Skip localization test when setlocale is not functional.
+	* tests/localization.at (localized compiler messages): Skip
+	test when there is a warning about `LC_ALL'.
+	* THANKS: Update.
+	Report by Maciej Helminiak.
+
+2009-05-02  Alan Hourihane  <alanh@fairlite.co.uk>  (tiny change)
+
+	Improved support for FreeMiNT.
+	* libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN) [mint]: Hard-code
+	command line length limit to 8192, to avoid long test.
+	* NEWS, THANKS: Update.
+
+2009-05-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Initial port for BlueGene BG/L.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG) [linux]: Detect bgxl*, bgf*, mpixl*
+	compilers.
+	* NEWS, THANKS: Update.
+	Report, feedback and testing by John R. Cary and Christian
+	Rössel.
+
+	manual: fix grammaros.
+	* doc/libtool.texi (Dlpreopening): Fix grammaro.
+	(C header files): Remove duplicate word.
+
+	Allow through -tp=* at link time, for pgcc.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Portlant Group
+	pgcc uses `-tp=PROCESSOR' for target processor selection; allow
+	the flag through at link time.
+	Report by Ethan Mallove.
+
+	Fix quoting of eval'ed variable.
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Double-quote
+	$lt_cv_sys_global_symbol_pipe for eval, like we do in ltmain,
+	in order to preserve TABs and multiple adjacent whitespace.
+	Report by Bruno Haible.
+
+2009-04-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Cope better with missing `makeinfo' in `bootstrap'.
+	* bootstrap: Update `./doc/notes.txt' last so missing `makeinfo'
+	does not cause a broken tree.
+	* THANKS: Update.
+	Report by Christian Rössel.
+
+2009-03-29  Yaakov Selkowitz  <yselkowitz@users.sourceforge.net>  (tiny change)
+	    Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[cygwin] Improve operation with gcc4
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [cygwin*]:
+	Add w32api to sys_lib_search_path_spec without overriding gcc's
+	own search path.
+
+2009-03-29  Yaakov Selkowitz  <yselkowitz@users.sourceforge.net>  (tiny change)
+	    Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Use correct export_dynamic_flag_spec for PE-COFF $hosts
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) 
+	[cygwin*|mingw*|pw32*|cegcc*]: Define export_dynamic_flag_spec
+	as -Wl,--export-all-symbols, as required by GNU ld for PE-COFF.
+
+2009-03-29  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Improve compatibility with older automake
+	* libltdl/m4/lt~obsolete.m4: Add AC_DEFUNs for
+	_LT_PREPARE_SED_QUOTE_VARS and _LT_PROG_ECHO_BACKSLASH.
+	Report by Yaakov Selkowitz.
+
+2009-03-20  Peter Rosin  <peda@lysator.liu.se>
+
+	LT_OUTPUT should always create the libtool script.
+	* libltdl/m4/libtool.m4 (LT_OUTPUT): Make LT_OUTPUT ignore the
+	--no-create configure option, and assume that the user wants
+	to use an up-to-date libtool script if the LT_OUTPUT macro is
+	present.
+	* tests/early-libtool.at: Make sure we do not regress.
+
+2009-01-26  Peter Rosin  <peda@lysator.liu.se>
+
+	Don't settle for any dumpbin/link program as name lister.
+	* libltdl/m4/libtool.m4 (LT_PATH_NM): When locating dumpbin or
+	link -dump, check if they appear to really be capable of name
+	listing, in order to eliminate e.g. link from coreutils. This
+	makes the name lister decision fall back on nm as the default if
+	no acceptable candidate is found, which mainly happens on
+	(arguably broken) cross compiles.
+	* NEWS: Update
+	* THANKS: Update
+	Reports by Rudolf Leitgeb and Peter Kjellerstedt.
+
+2009-03-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Document INNER_TESTSUITEFLAGS, drop leading space.
+	* README: Document INNER_TESTSUITEFLAGS.
+	* tests/cmdline_wrap.at (Run tests with low max_cmd_len):
+	When using INNER_TESTSUITEFLAGS on the testsuite invocation,
+	drop leading space after "-k libtool", so that the user may
+	further limit the set of tests to be run.
+
+2009-03-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix low max_cmd_len template test on UnixWare.
+	* libltdl/config/ltmain.m4sh (func_mode_link): When expanding
+	$reload_cmds, always put objects in $reload_objs rather than
+	adding them to the command line, to allow more general command
+	lines in reload_cmds.  Ensure $reload_objs contains a leading
+	space.
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG) [sysv5*,
+	sco3.2v5*, sco5v6*] <reload_cmds>: For CC, invoke prelinker
+	before creating reloadable object.
+	(_LT_CMD_RELOAD) <reload_cmds, reload_flag>: Declare as
+	_LT_TAGDECL, not _LC_DECL.
+	(_LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG, _LT_LANG_FC_CONFIG)
+	(_LT_LANG_GCJ_CONFIG) <reload_cmds, reload_flag>: Initialize
+	from default (C tag) value.
+	* THANKS: Update.
+	Report and analysis by Tim Rice and John Wolfe.
+
+2009-02-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* doc/libtool.texi (Distributing libltdl, Test descriptions):
+	Add missing parentheses.
+
+2009-02-28  Tim Rice  <tim@multitalents.net>
+
+	Fix C++ template handling for old archives on UnixWare 7.1.4.
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG) [sysv5*,
+	sco3.2v5*, sco5v6*] <old_archive_cmds>: For CC, add template
+	prelink step before archiving.  Fixes template.at test failures.
+
+2009-02-28  Török Edwin  <edwintorok@gmail.com>  (tiny change)
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Do not add bogus directory arguments to link command lines.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Ensure $path is
+	always initialized before it is used.  Reported for zsh, for
+	which $path contains $PATH entries even after "emulate sh", see
+	<http://bugs.debian.org/517501>.
+
+2009-02-28  Andreas Schwab  <schwab@suse.de>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Remove remaining references to CVS.
+	* bootstrap: Remove references to CVS.
+	* README.alpha: Likewise.
+	* clcommit.m4sh: Likewise.
+	* doc/libtool.texi: Bump copyright years.
+	(libtool script contents): Describe macro_revision as revision
+	without reference to CVS.
+
+2009-02-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Do not pass $INSTALL via TESTS_ENVIRONMENT.
+	* Makefile.am (TESTS_ENVIRONMENT): Set lt_INSTALL, not INSTALL,
+	so that a bogus relative path to the install-sh script in the
+	source tree is not propagated to the configure scripts of the
+	old test suite.
+	* tests/testsuite.at: Adjust.
+	* tests/install.at (Install tests): Likewise.
+
+2009-02-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+	    Kurt Roeckx <kurt@roeckx.be>
+
+	New test for lt_dlopenext error message.
+	* tests/lt_dlopenext.at (lt_dlopenext error messages): New file,
+	with new test, with sources taken from the Autobook example.
+	* Makefile.am: Update.
+
+2009-02-03  Kurt Roeckx <kurt@roeckx.be>
+
+	lt_dlopenext sets error upon successful library load.
+	* libltdl/ltdl.c (lt_dlopenadvise): Fix bogus error on
+	successful loading of library with lt_dlopenext.
+	Report by Kaiwang Chen in <http://bugs.debian.org/510006>.
+
+2009-02-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix sed script in install.at.
+	* tests/install.at (Install tests): Fix typo in sed script,
+	fixes test failure on HP-UX.
+
+	Fix $INSTALL in testsuite with relative path to install-sh.
+	* tests/testsuite.at: If `$INSTALL' points to in-tree
+	install-sh, override a possibly-relative path to it with an
+	absolute one.
+
+	install mode: do not pass `-m $install_override_mode' to cp.
+	* libltdl/config/ltmain.m4sh (func_mode_install): New variable
+	$install_cp, factor test when `cp' is used for installation.
+	Do not pass mode override to cp.  Fixes `libtool --mode=install
+	cp ...' on HP-UX; cp should not be used for libraries that might
+	be needed by programs invoked during the installation process.
+
+	Fix sed script portability issue in func_version.
+	* libltdl/config/getopt.m4sh (func_version): Remove space in
+	`/\./! {' sed command, to please HP-UX sed.
+
+2009-01-31  Jeff Squyres <jsquyres@cisco.com>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	New test for bogus lt_dlopen error message.
+	* tests/lt_dlopen.at (lt_dlopen error messages): New file, new
+	test, marked as XFAIL for now.
+	* Makefile.am: Adjust.
+	Report and reproducible test case by Jeff Squyres.
+
+2009-01-31  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	execute mode: do not transform *.lo or *.la arguments.
+	* libltdl/config/ltmain.m4sh (func_mode_execute): Do not check
+	arguments matching *.lo or *.la for script wrappers.
+	* tests/execute-mode.at (execute mode): Add tests.
+	* NEWS, THANKS: Update.
+	Report by Paul Biggar.
+
+	Nonexistent `main' does not guarantee link failure.
+	* tests/fail.at (Failure tests): Use an unresolved symbol,
+	rather than non-presence of `main', to provoke a link failure
+	also on QNX.  Only check for failure of the libtool script if
+	the link without libtool would have failed, too.
+	Report by Mike Gorchak.
+
+	Use AT_CHECK more liberally in duplicate members test.
+	* tests/duplicate_members.at (duplicate members in archive
+	tests): Wrap link commands in AT_CHECK, they might fail, as seen
+	on QNX.
+	* THANKS: Update.
+	Report by Mike Gorchak.
+
+2009-01-30  Akim Demaille  <demaille@gostai.com>
+
+	Fix cwrapper warnings from MSVC 2005.
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src)
+	[file scope]: define _CRT_SECURE_NO_DEPRECATE.
+
+2009-01-29  Akim Demaille  <demaille@gostai.com>
+
+	Fix bootstrap with older libtool.m4 in reach of aclocal.
+	* libltdl/m4/lt~obsolete.m4: Add stub definitions for
+	_LT_REQUIRED_DARWIN_CHECKS and _LT_AC_PROG_CXXCPP.
+
+	Fix func_exec_init.
+	* tests/defs.m4sh (func_exec_init): Instead of using the undefined
+	my_dir, call func_dirname_and_basename and use its result.
+	(func_make): For consistency, don't use the useless local variable
+	my_dir.
+
+2009-01-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Document --mode short-hands better, and test them.
+	* doc/libtool.texi (Invoking libtool): Give examples for using
+	the `--mode=MODE' short-hand `MODE', or abbreviations thereof.
+	* libltdl/config/ltmain.m4sh: Mention the short-hand for MODE
+	in the --help output.
+	* tests/help.at (mode short-hands): New test group.
+	Suggestion by Bruno Haible.
+
+	func_version copes with multi-line copyright headers.
+	* libltdl/config/getopt.m4sh (func_version): Slurp in copyright
+	lines until a period is found.
+	* libltdl/config/ltmain.m4sh: Multi-line copyright is ok to use
+	now.
+	* tests/help.at (standard command line options): New file, new
+	tests.  Make this test group the first one for libtool tests,
+	moving the banner ...
+	* tests/duplicate_members.at: ... from here.
+	* Makefile.am (TESTSUITE_AT): Add tests/help.at.
+
+2009-01-29  Akim Demaille  <demaille@gostai.com>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Normalize compiler output due to compiler wrappers.
+	* tests/testsuite.at (LT_AT_NORMALIZE_COMPILER_OUTPUT): New
+	macro, to normalize ccache and distcc output.
+	* tests/localization.at (localized compiler messages): Use it.
+
+2009-01-29  Peter Rosin  <peda@lysator.liu.se>
+
+	Make modified libtool script in cwrapper test executable
+	* tests/cwrapper.at: Make modified libtool script executable.
+	Report by Roumen Petrov.
+
+2009-01-28  Akim Demaille  <demaille@gostai.com>
+
+	Clean space uses.
+	* libtoolize.m4sh: Remove trailing spaces.
+	Use <tab><sp>, as some editors remove "useless" spaces in
+	<sp><tab>.
+
+2009-01-26  Peter Rosin  <peda@lysator.liu.se>
+
+	AWK is required, make sure it is set.
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS: Make sure
+	AWK is set (automake brings it in, but is not always used).
+	Fixes old-m4-iface.at on MSYS/MSVC.
+
+2009-01-25  Mike Frysinger  <vapier@gentoo.org>
+
+	Fix typo in libtool install mode documentation.
+	* libltdl/config/ltmain.m4sh (func_mode_help): Change -inst-prefix
+	to -inst-prefix-dir.
+	* doc/libtool.texi (Install mode): Likewise.
+
+2009-01-24  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Add -Wall to cwrapper tests.
+	* tests/cwrapper.at: Add -Wall existing tests. Add additional
+	round of tests with -Wall alone.
+
+2009-01-24  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[cygwin|mingw] cwrapper cleanups.
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src)
+	[file scope]: re-organized includes and portability
+	macros. Avoid oldnames on MINGW32 and MSVC for
+	setmode/stat/chmod/getcwd/putenv. Declare _putenv on
+	MINGW32 when -ansi. Use namespaced macro LT_DEBUGWRAPPER.
+
+2009-01-24  Peter Rosin  <peda@lysator.liu.se>
+
+	Expand exit status test in LT_AT_NOINST_EXEC_CHECK correctly
+	* tests/testsuite.at (LT_AT_NOINST_EXEC_CHECK): STATUS is
+	argument $3, not $2.
+
+2009-01-23  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Add tests for cwrapper with -std=c89 and -std=c99
+	* tests/cwrapper.at: New file.
+	* Makefile.am: Add tests/cwrapper.at.
+
+2009-01-22  Peter Rosin  <peda@lysator.liu.se>
+
+	Unify line endings in localization test.
+	* tests/testsuite.at: Update copyright year.
+	(LT_AT_UNIFY_NL): Add macro that unifies line endings on
+	platforms that suffer from such confusion.
+	* tests/localization.at: Use it. Update copyright year. Fixes
+	the test on MSYS/MSVC.
+
+2009-01-21  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[cygwin|mingw] Fix compile warnings when -std=c89.
+	* libltdl/config/ltmain.m4sh (func_emit_wrapper_part1):
+	move contents to...
+	(func_emit_wrapper_part2): move contents to...
+	(func_emit_wrapper): here.
+	(func_emit_cwrapperexe_src) [file scope]: Remove
+	variables script_text_part1 and script_text_part2.
+	(func_emit_cwrapperexe_src) [lt_dump_script]: New function.
+	(func_emit_cwrapperexe_src) [main]: Call it.
+
+2009-01-21  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Minor cygwin cleanup
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms): Correct
+	case pattern for cygwin.
+
+2009-01-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Avoid failure due to Cygwin path detection bug.
+	* tests/execute-mode.at (execute mode): Ignore noise on stderr;
+	Cygwin might consider `d\"e' to be a DOS-style path and warn.
+	Report by Charles Wilson.
+
+2009-01-19  Robert Millan  <rmh@aybabtu.com>
+
+	Support GNU/kOpenSolaris.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_CHECK_MAGIC_METHOD, _LT_COMPILER_PIC, _LT_LINKER_SHLIBS)
+	(_LT_LANG_CXX_CONFIG) [kopensolaris*-gnu]: Recognize
+	GNU/kOpenSolaris.
+	* libltdl/m4/ltdl.m4 (LT_SYS_DLOPEN_DEPLIBS): Likewise.
+	* NEWS, THANKS: Update.
+
+2009-01-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Another LT_AT_EXEC_CHECK fixup.
+	* tests/shlibpath.at (shlibpath_overrides_runpath): Use
+	LT_AT_EXEC_CHECK instead of AT_CHECK.
+
+2009-01-19  Roumen Petrov  <bugtrack@roumenpetrov.info>  (tiny change)
+
+	Add missing $EXEEXT to java test.
+	* tests/convenience.at (Java convenience archives): Add $EXEEXT.
+
+2009-01-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Bump copyright years.
+	* ChangeLog.2008: New, rotated from ...
+	* ChangeLog: ... here.
+	* Makefile.am (EXTRA_DIST): Add ChangeLog.2008.
+	* NEWS, libltdl/config/ltmain.m4sh: Bump copyright years.
+	* libltdl/m4/libtool.m4 (_LT_COPYING, LT_OUTPUT): Likewise.
+	* libtoolize.m4sh: Likewise.
+
+2009-01-14  Peter Rosin  <peda@lysator.liu.se>
+
+	Fix flakey mdemo-dryrun test on MSYS (again!)
+	* tests/mdemo-dryrun.test: ls -l in MSYS sometimes shows year,
+	not time, for really fresh files. Add sleep 1 call at yet another
+	strategic position. Makes the test pass reliably for MSYS/MinGW.
+
+Continued in ChangeLog.2008
+
+vim:tw=72
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/ChangeLog.2010 b/ChangeLog.2010
new file mode 100644
index 0000000..4880098
--- /dev/null
+++ b/ChangeLog.2010
@@ -0,0 +1,2489 @@
+2010-12-20  Ian Lance Taylor  <iant@google.com>
+
+	* libltdl/m4/libtool.m4 (LT_LANG): Add Go.
+	(AC_PROG_GO): Provide.
+	(_LT_SYS_HIDDEN_LIBDEPS): Add Go case.
+	(_LT_LANG_GO_CONFIG): Define.
+	(LT_PROG_GO): Define.
+	(AC_PROG_GO): Define if not defined.
+	* libltdl/config/ltmain.m4sh: Match *.go.
+	* doc/libtool.texi (LT_INIT): Mention Go.
+	(Tags): Mention Go.
+	* configure.ac: Enable Go.
+	* NEWS: Update.
+
+2010-12-20  Brice De Bruyne  <bricedb@gmail.com>  (tiny change)
+
+	Also turn off -fuse-linker-plugin for postdep_objects computation.
+	* libltdl/m4/libtool.m4 (_LT_SYS_HIDDEN_LIBDEPS): Add
+	-fno-use-linker-plugin to temporary compile flags if necessary,
+	to fix C++ postdep_objects setting with -flto
+	-fuse-linker-plugin.
+	* NEWS, THANKS: Update.
+
+2010-12-20  KO Myung-Hun  <komh@chollian.net>  (tiny change)
+
+	Set command line length limit for OS/2.
+	* libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN) [os2]
+	<lt_cv_sys_max_cmd_len>: Set to 8192 to avoid long test.
+
+2010-12-20  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix PIC flags with mpif77 using ifort on GNU/Linux.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux]:
+	Match Intel compiler also using $CC -V output, to avoid false
+	negatives with compiler drivers like mpif77.
+	Report by Christian Rössel.
+
+2010-12-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix PIC flags with MPI wrappers using Portland on GNU/Linux.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux]:
+	Match Portland compilers also using $CC -V output, to avoid
+	false negatives with MPI compiler drivers.
+	Report by Christian Rössel.
+
+	* libltdl/m4/libtool.m4 (_LT_SETUP): Fix quoting for
+	PATH_SEPARATOR.
+
+2010-12-15  KO Myung-Hun  <komh@chollian.net>  (tiny change)
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix PATH_SEPARATOR handling for OS/2.
+	* Makefile.am (update_mans): Quote $(PATH_SEPARATOR).
+	* libltdl/m4/libtool.m4 (_LT_SETUP): Add _LT_DECL for
+	PATH_SEPARATOR.
+	* libltdl/config/general.m4sh: Use PATH_SEPARATOR when computing
+	$progpath.
+	* THANKS: Update.
+
+2010-12-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix nvcc PIC setting on darwin.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC)
+	<lt_prog_compiler_pic>: Prepend -Xcompiler to nonempty variable
+	setting rather than hard-coding -Xcompiler -fPIC, for darwin.
+	* NEWS, THANKS: Update.
+	Report by Paweł Daniluk.
+
+	Honor $AUTOCONF, $AUTOMAKE in --help output.
+	* libltdl/config/getopt.m4sh (func_help): Use $AUTOCONF and
+	$AUTOMAKE if set, for --version outout.
+
+	docs: Libtool configuration diagram.
+	* doc/libtool.texi (Integrating libtool): Add diagrams
+	explaining the dependencies between Libtool files.
+	Suggestion by Ethan Mallove.
+
+2010-11-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Eliminate hardcode_libdir_flag_spec_ld tag variable.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Set $wl to empty
+	if $LD is used for creating shared libraries.  Do not use
+	hardcode_libdir_flag_spec_ld any more.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	(_LT_LANG_F77_CONFIG, _LT_LANG_FC_CONFIG, _LT_SYS_DYNAMIC_LINKER)
+	<hardcode_libdir_flag_spec_ld>: Remove all instances of the tag
+	variable.
+	(_LT_LINKER_SHLIBS) [linux, xlf] <hardcode_libdir_flag_spec>:
+	Set variable, including ${wl}.  Fixes hardcoding in programs
+	created by XL Fortran on GNU/Linux.
+	* NEWS, THANKS: Update.
+	Report by Paul H. Hargrove.
+
+	Rebuild menus in the manual.
+	* doc/automake.texi: Rebuild menus (using ^C ^U ^A in emacs).
+	Thanks to Ian Lance Taylor for the suggestion.
+
+2010-11-07  Ollie Wild  <aaw@google.com>
+
+	Modify --with-pic to support per-package configurations.
+	* libltdl/m4/libtool.m4:  Modify --with-pic to accept a list of
+	package names.  Modelled off --enable-shared.
+	* tests/with-pic.at: New test.
+	* Makefile.am (TESTSUITE_AT): Add tests/with-pic.at.
+	* doc/libtool.texi (LT_INIT): Enhance documentation of
+	--with-pic configure flag.
+	* NEWS (New features): Mention that --with-pic now accepts a
+	comma-separated list of package names.
+
+2010-11-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix cwrapper test failure with --disable-static.
+	* tests/cwrapper.at (cwrapper and installed shared libraries):
+	Compile program source without libtool, so we can be sure a
+	non-PIC object will be created.
+
+2010-11-01  Peter Rosin  <peda@lysator.liu.se>
+
+	docs: Windows DLLs and headers.
+	* doc/libtool.texi (Platform quirks): Add new subsection
+	'Windows DLLs'.
+
+	* doc/libtool.texi (Platform quirks): Fix typo.
+
+2010-10-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	docs: mention shell requirement for libtool script.
+	* doc/libtool.texi (Invoking libtool): Document that the shell
+	used to invoke libtool needs to be the same used to configure
+	it.
+	* THANKS: Update.
+	Report by Markus Duft.
+
+2010-10-15  Gary V. Vaughan  <gary@gnu.org>
+
+	libtool: remove redundant unsubstituted shell var defaults.
+	* Makefile.am (libltdl/config/ltmain.sh): Boilerplate code from
+	libltdl/config/general.m4 sets some default shell variables
+	designed to be substituted by `$(configure_edit)'.  Actually,
+	`libtool' uses the language tag values for those variables, and
+	`ltmain.m4sh' is not passed through `$(configure_edit)', so they
+	are just noise.  Edit them out at bootstrap time.
+
+2010-10-15  Gary V. Vaughan  <gary@gnu.org>
+
+	maint: don't leak developer GREP, SED etc into distribution file.
+	* Makefile.am: Having rearranged the file, now apply the actual
+	changes to follow-up.
+	(edit): Split into two parts...
+	(bootstrap_edit): ...substitutions that should happen at bootstrap
+	time...
+	(configure_edit): ...and substitutions that should not happen until
+	configure time.
+	* Makefile.am (libltdl/m4/ltversion.m4, libltdl/config/ltmain.sh)
+	(libtoolize.in, tests/package.m4): Use bootstrap_edit.
+	(libtoolize, tests/defs): Use configure_edit.
+	* HACKING (Release Procedure): Remove the note to workaround the
+	bug fixed by this changeset.
+	* NEWS (Bug fixes): Mention that this bug is now fixed.
+	Reported by Joerg Sonnenberger.
+
+	maint: rearrange Makefile.am in preparation for a follow-up patch.
+	* Makefile.am (Libtool scripts.): Move this section below the
+	`Bootstrap.' section...
+	(libtoolize.in): ...except this one which is generated at
+	bootstrap time, and was added into the `Bootstrap.' section.
+	(Libltdl.): Move this section below the `Libtool scripts.'
+	section.
+
+2010-10-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix linking from only convenience archives with gfortran on Darwin.
+	* libltdl/m4/libtool.m4 (_LT_DARWIN_LINKER_FEATURES): Update
+	macro comment header.
+	[darwin, F77, FC] <compiler_needs_object>: Set to yes if
+	whole_archive_flag_spec is nonempty.  Fixes convenience.at test
+	suite failures with gfortran 4.2 on Darwin.
+	* THANKS: Update.
+	Report by Paul Laight.
+
+	Fix bindir check logic, and relax non-bindir case for AIX.
+	* tests/bindir.at (bindir install tests): Rewrite checks for
+	place of the installed shared library in two separate tests,
+	depending on whether -bindir is supposed to have an effect or
+	not.  In the positive case, make the test stricter so that we
+	reject libraries in $libdir.  In the negative case, do not
+	require a major version number in the $libdir file name, for AIX
+	without runtimelinking.  If tmpdir creation fails, skip the
+	test.  Use fewer bindir directory names for testing, to speed
+	up the test.  Also mention MSVC style DLL name in comment.
+	Report by Peter Rosin.
+
+	tests: remove unneeded 'bindir compile check' test.
+	* tests/bindir.at (bindir compile check): Remove.
+
+2010-10-14  Peter Rosin  <peda@lysator.liu.se>
+
+	tests: fix $EXEEXT typo.
+	* tests/depdemo-relink.test (func_restore_files): Use $EXEEXT
+	instead of $EXEXT.
+
+2010-10-12  Simon Josefsson  <simon@josefsson.org>
+	    Matěj Tý� <matej.tyc@gmail.com>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	docs: improve description of -no-undefined.
+	* doc/libtool.texi (Link mode): Fix -no-undefined description.
+	(Inter-library dependencies): Use Windows not AIX as example
+	system.  Clarify need for symbol resolution at library creation
+	time.
+
+2010-10-09  Paolo Bonzini  <bonzini@gnu.org>
+
+	Add missing sysroot resolution.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Resolve sysroot
+	when fetching the install directory of dependent libraries.
+	Reported by Lionel Landwerlin <llandwerlin@gmail.com>,
+	patch by Khem Raj <raj.khem@gmail.com>.
+	* THANKS: Reorder entries, add Khem and Lionel.
+
+2010-10-07  Roumen Petrov  <bugtrack@roumenpetrov.info>
+
+	Add test case for 69e77671 (cwrapper PATH manipulation order)
+	* tests/cwrapper.at: Add new test 'cwrapper and installed shared
+	libraries.'
+
+2010-10-04  Peter Rosin  <peda@lysator.liu.se>
+
+	cwrapper: split long lines when dumping the wrapper script.
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src): If
+	the wrapper script contains long lines, split them for
+	readability and to conform with C standards.
+	* tests/cwrapper.at (cwrapper string length): New test, making
+	sure we don't regress.
+
+	msvc: handle symbols from different files independently.
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS)
+	<dumpbin, lt_cv_sys_global_symbol_pipe>: Make all sections
+	viable for symbol extraction again when the symbols from a new
+	file starts.  Fixes tests/tagdemo-make.test for MSVC 10.
+	* tests/dumpbin-symbols.at: New test, making sure we don't
+	regress.
+	* Makefile.am (TESTSUITE_AT): Update.
+
+2010-09-27  Peter Rosin  <peda@lysator.liu.se>
+
+	tests: check if sys_lib_search_path_spec works on MSVC.
+	* tests/search-path.at (sys_lib_search_path on w32): New test,
+	making sure v2.2.10-207-g09142ea doesn't regress.
+
+	Skip need_lib_prefix.at on systems without lib prefix on libraries.
+	* tests/need_lib_prefix.at [MSVC, OS/2]: Skip this test on
+	systems that do not have libraries prefixed with lib.
+
+	tests: clean up importing and exporting on w32.
+	Makes the touched tests pass for MSVC when DLLs are built.
+	* tests/demo/Makefile.am, tests/pdemo/Makefile.am: Define
+	BUILDING_LIBHELLO when building libhello.la.
+	* tests/demo/foo.h, tests/pdemo/foo.h (nothing) <MSVC>: Export
+	variable when building the libhello dll and import when using
+	libhello.  For GCC and non-w32, and when building a static
+	libhello, leave as an ordinary extern.
+	* tests/pdemo/foo.h [Cygwin]: Remove unneeded and "dead" export
+	and import logic (LIBFOO_DLL is always undefined).
+	* tests/pdemo/longer_file_name_foo.c,
+	tests/pdemo/longer_file_name_foo2.c (_LIBFOO_COMPILATION_): Not
+	useful before, even less so now.  Removed.
+	* tests/depdemo/l1/Makefile.am: Define BUILDING_LIBL1 when
+	building libl1.la.
+	* tests/depdemo/l2/Makefile.am: Define BUILDING_LIBL2 when
+	building libl2.la.
+	* tests/depdemo/l3/Makefile.am: Define BUILDING_LIBL3 when
+	building libl3.la.
+	* tests/depdemo/l4/Makefile.am: Define BUILDING_LIBL4 when
+	building libl4.la.
+	* tests/depdemo/l1/l1.h, tests/depdemo/l2/l2.h,
+	tests/depdemo/l3/l3.h, tests/depdemo/l4/l4.h <MSVC>: Export
+	variables when building the associated library dll and import
+	when using the library.  For GCC and non-w32, and when building
+	static libraries, leave as an ordinary extern.
+
+2010-09-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	docs: do not refer to Libtool version with dlopen functionality.
+	* doc/libtool.texi (Dlopened modules): Remove broken reference
+	to what should have been Libtool 0.9g.
+	Report by Roumen Petrov.
+
+2010-09-23  Peter Rosin  <peda@lysator.liu.se>
+
+	msvc: don't try to export import descriptors.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [cygwin, mingw]
+	[pw32, cegcc] <cl*, exclude_expsyms>: Don't export symbols in
+	import libraries related to describing what dll(s) the import
+	library is importing. Fixes problem in tests/demo-make.test
+	and some other tests.
+
+2010-09-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix regression in command-line length computation.
+	* libltdl/m4/libtool.m4 (LT_CMD_MAX_LEN): Use `env echo' rather
+	than possibly-undefined func_fallback_echo, to ensure we fork
+	and exec for this test.
+	* NEWS: Update.
+	Regression introduced in v2.2.6-39-g9c3d4d8.
+
+2010-09-22  Gary V. Vaughan  <gary@gnu.org>
+
+	Post-release administrivia.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	numbers to 2.4.1a.
+	* NEWS: Add header line for next release.
+
+	Release 2.4.
+	* libltdl/Makefile.inc (LTDL_VERSION_INFO): We've added the
+	static libprefix interface, so new version-info is C+1:0:R+1.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	numbers.
+	* NEWS: Update version number.
+
+	manual: web-manual index.html clashes with @node Index.
+	* doc/libtool.texi (Index): Renamed to `Combined Index'.
+
+	tests: ISO C++ forbids declaration of 'v1' with no type.
+	* tests/lt_dlexit.at (lt_dlexit unloading libs): Added an
+	explicit int type to declaration of 'v1' to prevent compilation
+	failure with C++.
+
+2010-09-22  Peter Rosin  <peda@lysator.liu.se>
+
+	tests: reloadable objects do not work on MSVC, SKIP test.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS)
+	[cygwin, mingw, pw32, cegcc] <cl*, reload_cmds>: Indicate that
+	reloadable objects do not work.
+	* tests/duplicate_conv.at: Skip last test if reloadable
+	objects do not work.
+	* doc/libtool.texi (libtool script contents) <reload_cmds>:
+	Document how to indicate that reloadable objects do not work.
+
+2010-09-21  Peter Rosin  <peda@lysator.liu.se>
+
+	msvc: eliminate spaces in the library search path.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [mingw, cygwin]
+	<cl*, sys_lib_search_path_spec>: The LIB path variable telling
+	where MSVC looks for libraries is likely to contain directory
+	names with spaces.  Convert those directory names to the short
+	8.3 DOS form (i.e. without spaces) when storing them in
+	sys_lib_search_path_spec, as that is a space separated variable.
+
+2010-09-21  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Revert to per-language libpath computation on AIX.
+	* libltdl/m4/libtool.m4 (_LT_SYS_MODULE_PATH_AIX): Accept
+	tagname argument.  Use global cache variable lt_cv_aix_libpath
+	to override per-language tag variables for the libpath value.
+	Fix the sed script to remove trailing space.
+	(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG): Pass tag argument to
+	_LT_SYS_MODULE_PATH_AIX.
+	Tracked down and reported by Rainer Tammer.
+
+2010-09-21  Gary V. Vaughan  <gary@gnu.org>
+
+	maint: edit-readme-alpha shouldn't try to re-edit during dist.
+	* libltdl/config/edit-readme-alpha: If README is non-writable
+	assume that it is being run from distcheck, and skip the edit
+	with a warning (to help diagnose cases where the heuristic is
+	not correct).  However, if README has already been edited to
+	the alpha text, quietly skip without an error message.
+
+2010-09-20  Eric Blake  <eblake@redhat.com>
+
+	maint: drop autobuild requirement
+	* HACKING: Update.
+
+	build: ship autobuild.m4, to reduce bootstrap requirement
+	* libltdl/m4/.gitignore: Drop autobuild.m4.
+	* libltdl/m4/autobuild.m4: New file, copied from autobuild.
+	* configure.ac (AB_INIT): Unconditionally call it.
+
+2010-09-20  Peter Rosin  <peda@lysator.liu.se>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	libltdl: Make sure preloaded symbols are declared extern "C".
+	* libltdl/ltdl.h (LTDL_SET_PRELOADED_SYMBOLS): Move the
+	declaration of lt__PROGRAM__LTX_preloaded_symbols to global
+	scope and make sure it has "C" linkage.  Makes exceptions.at
+	succeed on MSVC.
+
+2010-09-20  Peter Rosin  <peda@lysator.liu.se>
+
+	tests: __declspec (dll{ex,im}port) in tests/exceptions.at
+	* tests/exceptions.at (common.h, module.h, lib.h) [w32]: Use
+	__declspec (dllimport) and __declspec (dllexport) instead of
+	the less portable __attribute__ ((dllimport)) and
+	__attribute__ ((dllexport)).  Makes the test compile on MSVC.
+
+2010-09-19  Peter Rosin  <peda@lysator.liu.se>
+
+	tests: Import items from liba1 for MSVC.
+	* tests/lt_dlexit.at (b1.c) [MSVC]: Import function f1 and
+	variable v1 from liba1 when using them from modb1.  Makes the
+	test pass on MSVC.
+
+2010-09-18  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	tests: avoid distcheck failure with --disable-ltdl-install.
+	* tests/ltdl-libdir.at (libdir of installed modules): Skip if
+	$LIBLTDL does not exist.
+
+2010-09-18  Gary V. Vaughan  <gary@gnu.org>
+
+	maint: use sed instead of maintaining 2 README files.
+	* README.alpha: Deleted.  It was mostly identical to README.
+	* libltdl/config/edit-readme-alpha: New script to edit the
+	contents of README in the dist tree prior to tarring up.
+	* Makefile.am (dist-hook): Run it before rolling alpha release
+	tarball.
+
+	maint: improve README's `Obtaining the Latest Sources'.
+	* README (Obtaining the Latest Sources): Add instructions for
+	obtaining stable, alpha and nightly snapshot tarballs.
+	* README.alpha (Obtaining the Latest Sources): Adjust to match.
+
+	maint: reformat README `The Test Suites' for consistency.
+	* README (The Test Suites): Reformatted for consistency.
+	* README.alpha (The Test Suites): Adjust to match.
+
+	maint: improve `Reporting Bugs' in README and README.alpha.
+	* README (Reporting Bugs): Rewritten to a more complete and
+	concise guide to providing a good bug report.
+	* README.alpha (Reporting Bugs): Adjust to match.
+
+	maint: consolidate Introductions of README and README.alpha.
+	* README (Introduction): Rewritten to a more logical order for
+	first time users, incorporating some additional text that was
+	previously only in README.alpha.
+	* README.alpha (Introduction): Adjust to match.
+
+	maint: copy the Version Numbering section into README.alpha.
+	* README.alpha (Version Numbering): No less useful for users
+	of alpha releases.  Copied from README.
+
+2010-09-17  Peter Rosin  <peda@lysator.liu.se>
+
+	tests: actually detect missing 'test' in 'if "$foo" = ...'.
+	* tests/sh.test: Remove extra backslash in regex.
+
+	Copy over DLL_EXPORT handling from C to C++ for non-GCC on w32.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [mingw, cygwin, os2]
+	[pw32, cegcc]: Copy over the DLL_EXPORT handling from C to C++.
+
+2010-09-17  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	LTO: consistently accept -fwhopr* and -flto* for GCC.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Accept -fwhopr*.
+	* libltdl/m4/libtool.m4 (_LT_SYS_HIDDEN_LIBDEPS): Also match
+	-flto*.
+
+2010-09-17  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Fix order of PATH manipulation in cwrapper and shwrapper
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src:main): Call
+	lt_update_exe_path before lt_update_lib_path, to ensure that the
+	temporary rpath values (which include the OBJDIRs of uninstalled
+	libtool libraries) precede installation and final -rpath directories.
+	(func_emit_wrapper): Prepend $dllsearchpath to PATH before prepending
+	$temp_rpath to $shlibpath_var; similar rationale as above.
+	Reported by Jon Turney <jon.turney@dronecode.org.uk>
+
+2010-09-17  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Document libtool variable to_host_file_cmd.
+	* doc/libtool.texi (libtool script contents:to_host_file_cmd):
+	Document variable.
+	(libtool script contents:to_tool_file_cmd): Prefer `build platform'
+	to `build system'; Ditto `host platform'.
+
+2010-09-16  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Fix sh.test failure introduced in 72064249
+	* libltdl/config/ltmain.m4sh (func_mode_link): Avoid poor
+	syntax.
+
+2010-09-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	tests: avoid localization failure due to unstable compiler messages.
+	* tests/testsuite.at (LT_AT_NORMALIZE_COMPILER_OUTPUT):
+	Attempt to normalize temporary file names in error messages.
+	Fixes 'localized compiler messages' test failure on Darwin when
+	creating fat (multi-ABI) libraries.
+
+2010-09-13  Peter Rosin  <peda@lysator.liu.se>
+
+	Prefer $NM @file when the toolchain isn't native to $build.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Avoid calculating
+	the command line length and take the @file branch *if* the file
+	names needs to be converted for the toolchain and the @file
+	branch works.  Fixes problems in stresstest.at when doing a cross
+	from Cygwin to MinGW using MinGW native tools (a.k.a. a "faked"
+	cross), and for the specific case of MSVC on Cygwin it makes the
+	test pass.
+
+2010-09-15  Gary V. Vaughan  <gary@gnu.org>
+
+	maint: improve README instructions for fetching latest version.
+	* README, README-alpha (Obtaining the Latest Sources): New
+	section, describing use of savannah repositories and bootstrap.
+	* README.alpha (Reporting Bugs): Remove git instructions in
+	favour of a reference to the new `Obtaining the Latest Sources'
+	section.
+
+2010-09-14  Eric Blake  <eblake@redhat.com>
+
+	maint: ship .xz, not .lzma
+	* configure.ac (AM_INIT_AUTOMAKE): Prefer better file format.
+	* Makefile.maint (git-release, git-dist, prev-tarball)
+	(new-tarball, diffs): Use correct extension.
+	* HACKING: Update instructions.
+	* .gitignore: Ignore .xz files.
+
+2010-09-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	doc: avoid long lines in input and output, indexing fixes.
+	* doc/libtool.texi (Linking libraries)
+	(Module loaders for libltdl): Manually line-wrap examples, to
+	avoid long lines.
+	(Libltdl interface, User defined module data)
+	(Module loaders for libltdl): Wrap long @deftypefun input lines
+	using trailing '@'.  Use @deftypefun rather than @deftp where
+	appropriate, and add spaces in @deftypefun lines to fix the
+	index entries generated from these lines.
+	(Cheap tricks): Use @smallexample rather than @example, to avoid
+	long lines.
+
+	docs: @file and @option markup fixes.
+	* doc/libtool.texi (Creating object files, Linking libraries)
+	(Linking executables, Link mode, Finish mode, Autoconf macros)
+	(Using Automake, Inter-library dependencies, Dlpreopening)
+	(Linking with dlopened modules, Finding the dlname)
+	(Libltdl interface, Test descriptions, Multiple dependencies):
+	Add @option where needed, replace @samp with @file as
+	appropriate.
+
+2010-09-12  Peter Rosin  <peda@lysator.liu.se>
+
+	* .gitignore: Ignore *.obj files for MSVC (and w32 in general).
+
+	Adjust to moved auxiliary files and add compile.
+	* HACKING (Maintenance Notes): Adjust to moved files.  Add the
+	compile script.
+	* Makefile.maint (fetch): Also fetch the compile script.
+
+2010-09-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	tests: avoid empty AT_DATA contents, for zsh.
+	* tests/libtoolize.at (libtoolize macro serial update)
+	(libtoolize config files serial update, LIBTOOLIZE_OPTIONS):
+	Do not create empty files with AT_DATA, the latter is documented
+	to require a final newline.  Fixes testsuite failures with zsh
+	4.3.10.
+
+2010-09-12  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	When assigning $linklib value, honor [-all]-static[-libtool-libs]
+
+	* libltdl/config/ltmain.m4sh (func_mode_link): When prefer_static_libs
+	and static library exists, ensure old_library name is used as $linklib.
+	Fixes failure on mingw when both static and shared libraries are
+	present.
+
+2010-09-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	tests: work around zsh use of $options variable.
+	* tests/getopt-m4sh.at: Rename $options to $opts, the former is
+	special for zsh 4.3.10.
+
+	Fix AC_NO_EXECUTABLES test failure on IRIX 6.5.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [irix]: Cache result
+	of link check for -Wl,-exported_symbol.
+	* tests/no-executables.at (AC_NO_EXECUTABLES): Set
+	lt_cv_irix_exported_symbol, to avoid link check.
+
+2010-09-12  Jürgen Reuter  <juergen.reuter@physik.uni-freiburg.de>  (tiny change)
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Initial support for the NAG Fortran compiler on GNU/Linux.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) [linux] <nagfor>:
+	New set of entries, for NAG Fortran 5.1 and 5.2.
+	* NEWS: Update.
+
+2010-09-12  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix getopt.m4sh to require Autoconf 2.62 or newer.
+	* libltdl/config/getopt.m4sh (m4_version_prereq): Require 2.62,
+	not 2.61.
+
+2010-09-11  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Correct typo: $sharedlib_from_linklib_cmd missing '_cmd'
+
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms): Fix obvious
+	typo, $sharedlib_from_linklib_cmd missing '_cmd'.
+
+2010-09-10  Peter Rosin  <peda@lysator.liu.se>
+
+	Convert file name to toolchain format when invoking $NM.
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms)
+	(func_win32_libid, func_cygming_gnu_implib_p)
+	(func_cygming_ms_implib_p): When using the name lister to find
+	symbols in files, convert the file names to a format appropriate
+	for the tool. Fixes testsuite issues in mdemo-static-make.test
+	and mdemo-make.test when doing a cross from Cygwin/Wine to MinGW
+	using MinGW native tools (a.k.a. a "faked" cross).
+
+2010-09-09  Peter Rosin  <peda@lysator.liu.se>
+
+	Fix dependency tracking for MSYS/MinGW.
+	* libltdl/config/ltmain.m4sh (func_to_tool_file): Add lazy
+	argument which allows the user to specify conversions that are
+	not desired.
+	(func_mode_compile): Don't convert source files on MSYS, as
+	MSYS does it for us. This fixes a regression introduced by
+	"Use func_to_tool_file instead of fix_srcfile_path".
+	Reported by Charles Wilson.
+
+2010-09-08  Peter Rosin  <peda@lysator.liu.se>
+
+	Mention adjustment of naming of MSVC import libraries in NEWS.
+	* NEWS: Mention the change in import library naming on MSVC.
+
+2010-09-07  Peter Rosin  <peda@lysator.liu.se>
+
+	Adjust naming of MSVC import libraries.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [mingw, cygwin]
+	[pw32, cegcc] <cl*, library_names_spec>: Adjust naming of the
+	import library from foo-<major-version>.lib to foo.dll.lib, to
+	avoid clashes with the static library for unversioned libraries.
+	(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG) [mingw, cygwin, pw32]
+	[cegcc] <cl*, archive_expsym_cmds>: Explicitely name the import
+	library to match the above.
+
+	Fixup texi typo in previous.
+	* doc/libtool.texi (libtool script content) <postlink_cmds>:
+	Add missing 'code' command.
+
+	Convert POSIX file names to toolchain format for MSVC
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG)
+	[cygwin, mingw, pw32, cegcc] <cl*, postlink_cmds>: Make
+	sure the -outputresource: file name for the manifest tool is
+	in w32 format.
+	<cl*, archive_expsym_cmds>: Likewise for the MSVC command file
+	containing the exports and the output file name.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Precalculate the
+	toolchain format of the output_objdir file name and store it in
+	the tool_output_objdir variable. Also replace any occurrence of
+	@TOOL_OUTPUT@ in postlink_cmds with the toolchain version of the
+	@OUTPUT@ content.
+	* doc/libtool.texi (libtool script content): Update description
+	of postlink_cmds to mention @TOOL_OUTPUT@.
+
+2010-09-06  Peter Rosin  <peda@lysator.liu.se>
+
+	Use func_to_tool_file instead of fix_srcfile_path.
+	* libltdl/config/ltmain.m4sh (func_mode_compile): Replace the
+	fix_srcfile_path hook with a call to func_to_tool_file.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [cygwin,mingw,pw32]
+	[cegcc]: Drop fix_srcfile_path.
+	* doc/libtool.texi (libtool script contents): Likewise.
+	* NEWS: Mention that fix_srcfile_path has been replaced.
+
+	Convert file names to toolchain format in $NM and $AR @files.
+	* libltdl/config/ltmain.m4sh (func_mode_link): When listing
+	symbols and when creating archives using command files (or
+	response files), make sure that both the name of the command
+	file and the content are made up of file names in a format
+	appropriate for the tool. Fixes stresstest.at on MSYS when
+	run with low command line length.
+
+	Convert file names to toolchain format when linking.
+	* libltdl/config/ltmain.m4sh (func_mode_link): When exporting
+	symbols and when linking using command files (or response
+	files), make sure that both the name of the command file and
+	the content are made up of file names in a format appropriate
+	for the tool. Fixes problems in stresstest.at on MSYS when run
+	with low command line length.
+
+	Add file name conversion from $build to toolchain.
+	* configure.ac: Ensure to_tool_file_cmd is available to Makefile.
+	* libltdl/m4/libtool.m4 (_LT_PATH_CONVERSION_FUNCTIONS): Add
+	cache variable lt_cv_to_tool_file_cmd that describes how to
+	convert file names from $build to toolchain format.
+	* libltdl/config/ltmain.m4sh (func_to_tool_file): New function
+	that utilizes the above.
+	* Makefile.am: Ensure to_tool_file_cmd is included in
+	TEST_ENVIRONMENT so that it is passed to (old testsuite) tests.
+	* testsuite.at: Ensure to_tool_file_cmd is passed as a variable
+	setting on the configure line for (new testsuite) tests.
+	* doc/libtool.texi (libtool script content): Update with
+	to_tool_file_cmd description.
+	(Cygwin to MinGW Cross): Update to mention lt_cv_to_tool_file_cmd.
+
+2010-09-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	tests: avoid spurious test failure due to library mode on HP-UX.
+	* tests/help.at (debug tracing): Use $lt_INSTALL not cp for
+	install mode, the latter will not overwrite an existing library
+	with mode 555.
+
+2010-09-01  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Path conversion documentation
+	* doc/libtool.texi (Platform quirks): Add new subsections
+	'Cross compiling' and 'File name conversion'.
+
+2010-09-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	tests: avoid spurious pic_flag test failure on HP-UX 10.20.
+	* tests/pic_flag.at (override pic_flag at configure time):
+	Match HP-UX 10.20 cc warning about unknown options, to skip
+	the test.
+
+	tests: fix localization test for GCC on HP-UX 11.00.
+	* tests/localization.at (localized compiler messages): Be sure
+	to switch the locale only for the actual compiler commands, so
+	we don't pick up warnings from helper tools such as diff which
+	may not have the locale installed.
+
+	Avoid leaking make flags into testsuite results.
+	* tests/defs.m4sh: Unset MFLAGS, MAKEFLAGS, MAKELEVEL, __MKLVL__
+	and MAKE_JOBS_FIFO.
+	* tests/testsuite.at: Likewise.
+	Fixes warnings in test logs when the user uses 'make -jN check'
+	and inner $MAKE invocations can't connect to the job server.
+	Fixes spurious failures of configure-iface.at and of
+	demo-noinst-link tests with BSD and Tru64 make if the user uses
+	'make -k', as the exit status of the latter is not reliable.
+
+2010-09-01  Gary V. Vaughan  <gary@gnu.org>
+
+	Remove announce-gen.m4sh and mailnotify.m4sh.
+	* libltdl/config/announce-gen.m4sh: Removed.  This script has
+	no apparent connection to libtool functionality, and mostly
+	duplicates the better maintained gnulib announce-gen script.
+	* libltdl/config/mailnotify.sh: Removed. This script was used
+	by only clcommit.m4sh and announce-gen.m4sh, both of which are
+	now removed too.
+	* Makefile.maint (announce-gen, libltdl/config/mailnotify):
+	Targets removed.
+	* bootstrap: Remove the mailnotify regeneration warning.
+	* HACKING (Release Procedure): Remove references to
+	announce-gen.
+	(Alpha release note template, Full release note template):
+	Reinstated from before announce-gen was introduced.
+
+	Remove clcommit.m4sh.
+	* clcommit.m4sh: Removed. This script was written to help keep
+	ChangeLog and commit messages in sync when committing to CVS,
+	and is an anachronism now that Libtool uses git.
+	* Makefile.maint (commit): Target removed.
+	* bootstrap: Don't generate commit.
+	* HACKING (Release Procedure): Adjusted.
+
+2010-08-31  Peter Rosin  <peda@lysator.liu.se>
+
+	archive-in-archive.at passes with Microsoft lib.
+	* tests/archive-in-archive.at: Tighten test to check that the desired
+	object files are indeed part of the archive. Microsoft lib still
+	passes, so remove the expected failure for that case.
+
+	Dump archiver output to the log when testing @file support.
+	* libltdl/m4/libtool.m4 (_LT_PROG_AR): Redirect stdout to config.log
+	when testing for @file support.
+	Suggested by Ralf Wildenhues.
+
+	Silence archiver output when testing @file support.
+	* libltdl/m4/libtool.m4 (_LT_PROG_AR): Redirect stdout and stderr
+	to the bit bucket when testing for @file support.
+
+2010-08-31  Gary V. Vaughan  <gary@gnu.org>
+
+	Remove double `Generated from foo.m4sh' lines.
+	We now require a modern Autoconf to bootstrap libtool, which
+	will add the `Generated by ...' boiler-plate automatically,
+	so we can remove the hand-rolled @configure_input@
+	substitutions we had been doing:
+	* clcommit.m4sh, libtoolize.m4sh, tests/defs.sh,
+	libltdl/config/announce-gen.m4sh, libltdl/config/ltmain.m4sh,
+	libltdl/config/mailnotify.m4sh: Remove @configure_input@.
+	* Makefile.am (edit): Remove configure_input substitution.
+	(libtoolize, libltdl/config/ltmain.sh, libltdl/m4/ltversion.m4)
+	(tests/defs): Don't set `$input' shell variable.
+	* Makefile.maint (announce_gen, libltdl/config/mailnotify)
+	(commit): Likewise.
+
+2010-08-31  Peter Rosin  <peda@lysator.liu.se>
+
+	Extract the archive name from the .la file and use $AR (not ar).
+	* Makefile.am: Pass AR through to the testsuite.
+	* tests/archive-in-archive.at: Bump copyright year. Extract archive
+	name from the .la file instead of hardcoding the name, and allow
+	different archivers. Also clarify that the tested functionality is
+	currently broken.
+
+2010-08-30  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	tests: skip -Wall -Werror with Tru64 cc in cwrapper test.
+	* tests/cwrapper.at (cwrapper for uninstalled executables):
+	Use a link test rather than a compile test to flesh out unknown
+	compiler flags starting with -W; Tru64/OSF1 cc will happily
+	accept `-Wall -Werror' as indication to pass flags on to
+	subprocesses.
+
+	tests: avoid getopt-m4sh failures when autom4te is not available.
+	* tests/getopt-m4sh.at (_LT_AT_GETOPT_M4SH_SETUP):
+	Check $M4SH --version, skip on failure.
+
+	tests: mark 'syntax of .la files' as XFAIL, expose failure.
+	* tests/lalib-syntax.at (syntax of .la files): Assert that the
+	string returned by lt_dlerror after a failure is non-NULL, so
+	the failure shows up on systems other than Solaris.  Mark test
+	as expected to fail.
+	Suggested by Bob Friesenhahn.
+
+2010-08-30  Eric Blake  <eblake@redhat.com>
+
+	Simplify recent configure quoting portability workaround.
+	* configure.ac: Simplify setting of timestamp_string.
+
+2010-08-30  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Update path conversion warning messages
+	* libltdl/config/ltmain.m4sh (func_convert_file_check): Update
+	comments and warning message.
+	(func_convert_path_check): Update warning message.
+
+2010-08-29  Peter Rosin  <peda@lysator.liu.se>
+
+	Fix typo when renaming path conversion functions.
+	* tests/testsuite.at: Ensure to_host_file_cmd is passed as a
+	variable setting on the configure line for (new testsuite) tests.
+
+2010-08-29  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Support GCC LTO on GNU/Linux.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Allow through
+	flags matching -O*, -flto*, -fwhopr, -fuse-linker-plugin.
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Drop symbols
+	starting with __gnu_lto.
+	(_LT_LINKER_SHLIBS) [linux] <archive_cmds, archive_expsyms_cmds>:
+	Add $pic_flag for GCC.
+	(_LT_LANG_CXX_CONFIG) [linux] <archive_cmds, archive_expsyms_cmds>:
+	Likewise.
+	(_LT_SYS_HIDDEN_LIBDEPS): Ignore files matching *.lto.o.
+	* NEWS: Update.
+
+	Disable GCC LTO for verbose library extraction.
+	* libltdl/m4/libtool.m4 (_LT_SYS_HIDDEN_LIBDEPS): Temporarily
+	append -fno-lto or -fno-whopr to CFLAGS if CC or CFLAGS (which
+	are substituted with the per-language variables here) contain
+	-flto or match -fwhopr*, respectively.
+
+	Save and restore CFLAGS properly inside libtool.m4 macros.
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Use different
+	temporary variables for saved and restored values of $LIBS,
+	$CFLAGS, to avoid overlap with the *_CONFIG macros.
+	(_LT_LANG_CXX_CONFIG, _LT_LANG_F77_CONFIG, _LT_LANG_FC_CONFIG)
+	(_LT_LANG_GCJ_CONFIG, _LT_LANG_RC_CONFIG): Also save and restore
+	$CFLAGS, and override it with per-language flags, so that in
+	case output_verbose_link_cmd uses $CFLAGS, the right flags are
+	used.
+
+	Work around yet another shell quoting portability issue.
+	* configure.ac: Avoid nonportable quoted alternate variable
+	value in unquoted here document, so Solaris 10 sh and Tru64
+	ksh do not print spurious extra quotes.
+
+	Silence order-only configure test for AIX make.
+	* configure.ac: Also drop standard output, for AIX 5.1 make.
+
+2010-08-28  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Minor sysroot fixups.
+	* libltdl/m4/libtool.m4 (_LT_WITH_SYSROOT): Fix typo.
+	* tests/sysroot.at: Search also for crt0.o to accommodate cygwin.
+
+2010-08-28  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[cygwin|mingw|cross-compile]: Path conversion support.
+	* configure.ac: Ensure to_host_file_cmd is available to Makefile.
+	* TODO: Document QoI issue with file name conversion functions.
+	* libltdl/m4/libtool.m4 (_LT_PATH_CONVERSION_FUNCTIONS): New function
+	sets libtool variable $to_host_file_cmd, and employs cache.
+	(_LT_SETUP): Require it.
+	* tests/testsuite.at: Ensure to_host_file_cmd is passed as a
+	variable setting on the configure line for (new testsuite) tests.
+	* Makefile.am (TESTS_ENVIRONMENT): Ensure to_host_file_cmd is
+	included so that it is passed to (old testsuite) tests.
+	* libltdl/config/general.m4sh: Define $lt_sed_naive_backslashify here.
+	* libltdl/config/ltmain.m4sh ($to_host_file_cmd, $to_host_path_cmd):
+	New variables.
+	(func_cygpath): New function.
+	(func_init_to_host_path_cmd): New function.
+	(func_to_host_path): Renamed to...
+	(func_to_host_file): Refactored to... (now uses $to_host_file_cmd).
+	(func_convert_core_file_wine_to_w32): Here. New function.
+	(func_convert_core_msys_to_w32): Here. New function.
+	(func_convert_file_check): Here. New function.
+	(func_convert_file_noop): Here. New function.
+	(func_convert_file_msys_to_w32): Here. New function.
+	(func_convert_file_cygwin_to_w32): Here. New function.
+	(func_convert_file_nix_to_w32): Here. New function.
+	(func_convert_file_msys_to_cygwin): New function.
+	(func_convert_file_nix_to_cygwin): New function.
+	(func_to_host_pathlist): Renamed to...
+	(func_to_host_path): Refactored to... (now uses $to_host_path_cmd
+	and func_init_to_host_path_cmd).
+	(func_convert_path_check): Here. New function.
+	(func_convert_path_front_back_pathsep): Here. New function.
+	(func_convert_core_path_wine_to_w32): Here. New function.
+	(func_convert_path_noop): Here. New function.
+	(func_convert_path_msys_to_w32): Here. New function.
+	(func_convert_path_cygwin_to_w32): Here. New function.
+	(func_convert_path_nix_to_w32): Here. New function.
+	(func_convert_path_msys_to_cygwin): New function.
+	(func_convert_path_nix_to_cygwin): New function.
+
+2010-08-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix symlist variable path to use _WIN32 instead of __WINDOWS__.
+	* libltdl/config/ltmain.m4sh, libltdl/libltdl/lt_system.h,
+	libltdl/m4/libtool.m4, tests/demo/foo.h, tests/pdemo/foo.h:
+	Change __WINDOWS__ to _WIN32.
+	Report by Charles Wilson.
+
+	Add $pic_flag to archive_cmds and archive_expsym_cmds.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS)
+	<archive_cmds, archive_expsym_cmds>
+	[GNU ld, netbsd]: Add $pic_flag if ELF.
+	[GNU ld, solaris]: Likewise.
+	[GNU ld, default case]: Likewise.
+	[!GNU ld, freebsd, dragonfly]: Add $pic_flag.
+	[!GNU ld, GCC, hpux9]: Add $pic_flag.
+	[!GNU ld, GCC, hpux10]: Replace -fPIC with $pic_flag
+	[!GNU ld, GCC, hpux11, !hppa*64]: Replace -fPIC with $pic_flag.
+	[!GNU ld, GCC, irix5, irix6, nonstopux]: Add $pic_flag.
+	[!GNU ld, GCC, osf4, osf5]: Likewise.
+	[!GNU ld, GCC, solaris]: Likewise.
+	(_LT_LANG_CXX_CONFIG) <archive_cmds, archive_expsym_cmds>
+	[hpux9]: Add $pic_flag if $GXX.
+	[hpux10, hpux11, !hppa*64]: Replace -fPIC with $pic_flag.
+	[irix5, irix6]: Add $pic_flag if $GXX.
+	[osf4, osf5]: Likewise.
+	[solaris]: Add $pic_flag if $GXX and not GCC 2.7.
+
+	Uniform const'ness of symlist variable lt_preloaded_symbols.
+	On some systems, lt_preloaded_symbols may not be declared
+	const due to relocation issues.  C99 requires qualification to
+	match for compatible declarations, so ensure we declare
+	const'ness in the same way everywhere; link-time optimization
+	may otherwise rightfully complain about inconsistencies.
+	Since ltdl.h may not depend upon config.h, rely on system
+	defines for choosing const'ness.
+	* NEWS: Update.
+	* doc/libtool.texi (Dlpreopening): Document this issue.
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms):
+	[__WINDOWS__, __CYGWIN__, _WIN32_WCE]: Define LT_DLSYM_CONST
+	according to system defines.  Remove old shell cruft.  Use
+	LT_DLSYM_CONST for lt_${my_prefix}_LTX_preloaded_symbols.
+	* libltdl/libltdl/lt_system.h (LT_DLSYM_CONST): Likewise,
+	define LT_DLSYM_CONST according to system defines.
+	* tests/demo/foo.h (LT_DLSYM_CONST): Likewise.
+	* tests/pdemo/foo.h (LT_DLSYM_CONST): Likewise.
+	* tests/demo/dlmain.c (lt_dlsymlist): Use LT_DLSYM_CONST.
+	* tests/pdemo/longer_file_name_dlmain.c (lt_dlsymlist):
+	Likewise.
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Likewise
+	for configure test code.
+	* libltdl/ltdl.c (preloaded_symbols): Use LT_DLSYM_CONST.
+	* libltdl/ltdl.h (LTDL_SET_PRELOADED_SYMBOLS): Likewise.
+
+2010-08-28  Dave Korn  <dave.korn.cygwin@googlemail.com>
+
+	Ensure cwrapper magic string is not optimized away.
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src):
+	Declare MAGIC_EXE as volatile.
+	Report by Charles Wilson.
+
+2010-08-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix quoting in non-XSI func_xform, for IRIX sh.
+	* libltdl/config/ltmain.m4sh (func_xform): Remove spurious extra
+	M4 quotes.
+
+	Fix response file test for unreliable exit status of IRIX ar.
+	* libltdl/m4/libtool.m4 (_LT_PROG_AR): IRIX ar will not fail
+	over a command-line argument specifying a nonexistent file (such
+	as `@FILE'), so ensure failure with a reponse file containing
+	a nonexistent file.  Also, use lt_* variable prefix for
+	temporary variables.
+
+	Fix AC_LANG_PROGRAM warnings from git Autoconf.
+	* libltdl/m4/libtool.m4 (_LT_SYS_MODULE_PATH_AIX): Fix
+	underquoted AC_LANG_PROGRAM call.
+	(LT_PROG_AR): Use AC_LANG_PROGRAM.
+	(_LT_LINKER_SHLIBS) [irix, GCC]: Use the right source for the
+	given language.
+	* NEWS: Update.
+
+2010-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	fix AIX testsuite regression
+	* libltdl/config/ltmain.m4sh (func_resolve_sysroot): Partly
+	revert v2.2.10-83-gc45a288: Do not absolutize path here, only do
+	sysroot replacement.
+	(func_mode_link): Adjust.
+
+2010-08-22  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	fix --mode=finish
+	* libltdl/config/ltmain.m4sh (func_mode_finish): Invert then/else
+	blocks of the "if $opt_dry_run" conditional.
+
+2010-08-15  Paolo Bonzini  <bonzini@gnu.org>
+
+	improve code for sysroot --mode=finish
+	* libltdl/config/ltmain.m4sh (func_mode_finish): Change sysroot_regex
+	and sysroot_cmd delimiter from pipe to slash.  Wrap the entire for
+	loop with "if $opt_dry_run...fi" and print an explanatory message
+	for the --dry-run case.
+
+2010-08-12  Paolo Bonzini  <bonzini@gnu.org>
+
+	add libtool --mode=finish mode for sysroot
+	* doc/libtool.texi (Finish mode): Document behavior when *.la files
+	are passed.
+	* libltdl/config/ltmain.m4sh (func_mode_finish): Eliminate sysroot
+	or `=' signs representing it from files in $libs.
+	* tests/sysroot.at (SYSROOT_TESTS): Test for presence of sysroot
+	references before running libtool --mode=finish, and for absence
+	afterwards.
+
+	reorganize parsing of --mode=finish arguments
+	* libltdl/config/ltmain.m4sh (func_mode_finish): Split arguments for
+	directories and *.la files.
+
+	fix sysroot handling for deplibs of preopened libtool libs
+	* libltdl/config/ltmain.m4sh: Pass $dependency_libs of preopened libtool
+	through func_resolve_sysroot.
+
+	fix sysroot tests to pass on Fedora 13
+	* tests/sysroot.at: Link $prefix/include into the sysroot as well, as
+	required by newer GCC.
+
+2010-07-29  Paolo Bonzini  <bonzini@gnu.org>
+
+	initial version of the NEWS entry
+	* NEWS: Document sysroot support.
+
+	add sysroot test
+	* Makefile.am (TESTSUITE_AT): Add tests/sysroot.at.
+	* tests/sysroot.at: New.
+
+	emit sysrooted paths when installing .la files
+	* libltdl/config/ltmain.m4sh (func_replace_sysroot): New.
+	(func_mode_link): Prepend paths in $libdir with the sysroot.  Further,
+	replace the sysroot with = (using func_replace_sysroot) whenever
+	such a path is written in a .la file.
+
+	process postdeps to include sysrooted paths
+	* libltdl/m4/libtool.m4 (_LT_FUNC_STRIPNAME_CNF): New (from Charles Wilson).
+	(_LT_SYS_HIDDEN_LIBDEPS): Require it.  Use func_stripname_cnf to convert
+	sysroot (-L= and -R=) usage in postdeps.  Adjust the code because -L, -R
+	and -l flags will now always be separated from the rest of the argument.
+
+	handle sysrooted paths when reading dependencies to la files
+	* libltdl/config/ltmain.m4sh (func_mode_execute, func_mode_install,
+	func_mode_link): Whenever a .la file occurs in another .la file,
+	expand the sysroot path in it.
+
+2010-07-28  Paolo Bonzini  <bonzini@gnu.org>
+
+	teach libtool -L= and -R=
+	* libltdl/config/ltmain.m4sh (func_resolve_sysroot): New.
+	(func_mode_link): Always pass result of stripping -L and -R to
+	func_resolve_sysroot before using it.  Remove absolute path expansion
+	when func_resolve_sysroot subsumes it.  Expand sysroot in -rpath.
+	When processing dependent libraries also resolve sysroot paths there.
+
+	add --with-sysroot
+	* libltdl/m4/libtool.m4 (_LT_HOST_NONCANONICAL, _LT_WITH_SYSROOT): New.
+	(LT_SETUP): Require _LT_WITH_SYSROOT.
+
+	handle sysroot flags
+	* libltdl/config/ltmain.m4sh (func_mode_link): Recognize --sysroot
+	option.
+
+2010-08-27  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* NEWS: Only bootstrapping needs new Automake and Autoconf.
+
+	check-interactive and check-noninteractive for both testsuites.
+	* Makefile.am (COMMON_TESTS, TESTS): Split into ...
+	(NONINTERACTIVE_TESTS, INTERACTIVE_TESTS): ... these new
+	variables.
+	(check-interactive-new): Rename from check-interactive.
+	(check-noninteractive-new): Rename from check-noninteractive.
+	(check-interactive-old, check-noninteractive-old): New targets.
+	(check-interactive, check-noninteractive): Depend on the
+	respective targets for the old and the new test suites.
+	* doc/libtool.texi (Test descriptions): Simplify description
+	about check-interactive and check-noninteractive.  Add index
+	entries.
+
+	Adjust docs for renaming and for parallel-tests.
+	* README: Update example TESTS setting.
+	* README.alpha: Likewise.
+	* doc/libtool.texi (Test descriptions): Update for test renaming,
+	adjust descriptions accordingly.
+
+	Update VERBOSE handling for parallel-tests driver.
+	* tests/defs.m4sh: Default to verbose output, drop now-unneeded
+	handling of 'VERBOSE=no'.
+	* README: Update example usage.
+	* README.alpha: Likewise.
+	* doc/libtool.texi (Test descriptions, When tests fail): Remove
+	unneeded VERBOSE recommendations.  Point to per-test log files
+	and test-suite.log summary file.
+
+	Enable parallel-tests test driver for the old testsuite.
+	* configure.ac: New configure test to find out whether `make'
+	supports order-only prerequisites; set @ORDER@ accordingly.
+	(AM_INIT_AUTOMAKE): Enable parallel-tests option.
+	* tests/defs.m4sh (prefix): Derive install prefix for tests
+	from the test name, to avoid clashes.
+	* Makefile.am (CXX_TESTS, F77_TESTS, FC_TESTS, COMMON_TESTS):
+	Reformat.  Adjust for renamed tests.  Add dependencies between
+	the respective log files of the tests, to ensure proper ordering.
+	Use order-only dependencies if possible, between test groups that
+	use the same directory.
+	(clean-local-legacy): Remove `_inst-*' directories as well.
+	Prompted by suggestion from Bob Friesenhahn.
+
+	New alias scripts for old tests run more than once.
+	* tests/cdemo-shared-exec.test, tests/cdemo-shared-make.test,
+	tests/cdemo-static-exec.test, tests/cdemo-static-make.test,
+	tests/cdemo-undef-exec.test, tests/cdemo-undef-make.test,
+	tests/demo-nofast-exec.test, tests/demo-nofast-inst.test,
+	tests/demo-nofast-make.test, tests/demo-nofast-unst.test,
+	tests/demo-nopic-exec.test, tests/demo-nopic-make.test,
+	tests/demo-pic-exec.test, tests/demo-pic-make.test,
+	tests/demo-shared-exec.test, tests/demo-shared-inst.test,
+	tests/demo-shared-make.test, tests/demo-shared-unst.test,
+	tests/demo-static-exec.test, tests/demo-static-inst.test,
+	tests/demo-static-make.test, tests/demo-static-unst.test,
+	tests/depdemo-nofast-exec.test, tests/depdemo-nofast-inst.test,
+	tests/depdemo-nofast-make.test, tests/depdemo-nofast-unst.test,
+	tests/depdemo-shared-exec.test, tests/depdemo-shared-inst.test,
+	tests/depdemo-shared-make.test, tests/depdemo-shared-unst.test,
+	tests/depdemo-static-exec.test, tests/depdemo-static-inst.test,
+	tests/depdemo-static-make.test, tests/depdemo-static-unst.test,
+	tests/f77demo-shared-exec.test, tests/f77demo-shared-make.test,
+	tests/f77demo-static-exec.test, tests/f77demo-static-make.test,
+	tests/fcdemo-shared-exec.test, tests/fcdemo-shared-make.test,
+	tests/fcdemo-static-exec.test, tests/fcdemo-static-make.test,
+	tests/mdemo-shared-exec.test, tests/mdemo-shared-inst.test,
+	tests/mdemo-shared-make.test, tests/mdemo-shared-unst.test,
+	tests/mdemo-static-exec.test, tests/mdemo-static-inst.test,
+	tests/mdemo-static-make.test, tests/mdemo-static-unst.test,
+	tests/tagdemo-shared-exec.test, tests/tagdemo-shared-make.test,
+	tests/tagdemo-static-exec.test, tests/tagdemo-static-make.test,
+	tests/tagdemo-undef-exec.test, tests/tagdemo-undef-make.test:
+	New files.
+
+	Require Automake 1.11.1 for Libtool, enable color-tests.
+	* configure.ac (AM_INIT_AUTOMAKE): Require 1.11.1.  Enable
+	color-tests.
+	(LTDL_SUBDIR_LIBOBJS): Remove now-obsolete conditional and
+	feature test for Autoconf 2.59 and Automake 1.9.x workaround.
+	* Makefile.am: Simplify accordingly.
+	* bootstrap: Remove obsolete WORKING_LIBOBJ_SUPPORT workarounds
+	for Autoconf 2.59 and Automake 1.9.6.
+
+2010-08-23  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Fix syntax for cygwin-cross
+	libltdl/m4/argz.m4: Add quotes around variable, which
+	may contain the multiword value 'guessing no'.
+
+2010-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	configure: use Autobuild AB_INIT if available.
+	* configure.ac: Call AB_INIT if it is defined, with
+	$autobuild_mode as argument, to be set at configure time.
+	Set AB_VERSION to the Libtool version string.
+	* HACKING: Update.
+
+	Fix getopt tests to skip with Autoconf < 2.61.
+	* tests/getopt-m4sh.at (_LT_AT_GETOPT_M4SH_SETUP): Skip the test
+	if 'autom4te --language=m4sh' exits 63 because version 2.61 is
+	required.  Allows the testsuite to complete successfully with
+	Autoconf 2.59 and Automake 1.9.6.
+
+	Tidy and fix clean and distclean rules for old testsuite.
+	* Makefile.am (clean-local-legacy): Use $(CONF_SUBDIRS) instead
+	of hard-coding the list of test directories.  Use
+	$(AM_MAKEFLAGS).
+	(fake-distclean-legacy): New phony rule, to create fake Makefile
+	files if needed so that the automake-generated
+	distclean-recursive rule can work properly.
+	(distclean_recursive): New helper variable.
+	(distclean-recursive): Depend on fake-distclean-legacy.
+
+2010-08-22  Paolo Bonzini  <bonzini@gnu.org>
+
+	Fix sed_make_literal_regex.
+	* libltdl/config/general.m4sh (sed_make_literal_regex): Fix
+	definition.
+
+2010-08-15  Paolo Bonzini  <bonzini@gnu.org>
+
+	Factor the sed command used to make a regex from a literal.
+	* libltdl/config/general.m4sh (sed_make_literal_regex): New.
+	* libltdl/config/ltmain.m4sh
+	(func_cygming_dll_for_implib_fallback_core): Use it.  Suggested
+	by Ralf Wildenhues.
+
+2010-08-21  Rainer Tammer <tammer@tammer.net>  (tiny change)
+
+	Avoid issues with AIX resident shared libraries in old testsuite.
+	* tests/defs.m4sh [aix]: Remove file mode permission for others,
+	so shared libraries are not kept in memory after execution.
+	Fixes failures of repeated mdemo-inst.test with on AIX 5.3.
+
+2010-08-21  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Skip part of versioning test on AIX.
+	* tests/versioning.at (versioning): The AIX linker always
+	records the unversioned library name, even with runtimelinking,
+	so skip the execution test for the incompatibly upgraded
+	library.
+	Report by Rainer Tammer.
+
+	Remove dead code from versioning test.
+	* tests/versioning.at (versioning): No need to build unused
+	prog3.
+
+2010-08-20  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Don't hide the table of contents in the manual.
+	* doc/libtool.texi: Move the table of contents to the beginning.
+	Prompted by patch from Bruno Haible against Automake.
+
+	Remove superfluous dependency in Makefile.am.
+	* Makefile.am (tests/demo-conf.test): Remove dependency on
+	libtool, this test is a primary source and not generated.
+
+	Bump copyright years in manual.
+	* doc/libtool.texi: Bump copyright years.
+
+2010-08-13  Peter Rosin  <peda@lysator.liu.se>
+
+	Allow the use of a listing file if the archiver supports it.
+	* libltdl/m4/libtool.m4 (_LT_CMD_OLD_ARCHIVE): Move detection
+	of a suitable archiver...
+	(_LT_PROG_AR): ...to here. New macro, also detect if the
+	archiver supports a listing file with the new variable
+	archiver_list_spec.
+	* libltdl/config/ltmain.m4sh: If the archiver supports a listing
+	file, use it when max_cmd_len is exceeded.  This is needed for
+	tool chains such as MSVC which do not support piece by piece
+	linking (-r -o).
+	* doc/libtool.texi (libtool script contents): Update with
+	archiver_list_spec description.
+
+2010-08-10  Gary V. Vaughan  <gary@gnu.org>  (tiny change)
+
+	Make testsuite compatible with Autoconf 2.62 again.
+	* tests/getopt-m4sh.at (AT_CHECK): Autotest 2.62 chokes on unquoted
+	'#' in AT_CHECK, so replace all uses with '@%:@' quadrigraph.
+	Suggested by Eric Blake <eblake@redhat.com>
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+2010-08-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix more problematic code from "Add func_append_quoted and do..."
+	* libltdl/config/ltmain.m4sh (func_mode_link): Revert back
+	func_append instances that as assignments relied on the shell
+	not performing word splitting on the right hand side of the
+	assignment.
+
+	Fix another typo on "Add func_append_quoted and do..."
+	* libltdl/config/ltmain.m4sh (func_mode_link): Fix regression in
+	computation of finalize_rpath introduced in v2.2.10-40-g0da7d80,
+	fixing several testsuite failures on AIX.
+	Report by Rainer Tammer.
+
+2010-08-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Avoid unwanted error message in configure output.
+	* libltdl/m4/libtool.m4 (_LT_PROG_ECHO_BACKSLASH): Try print
+	in subshell, so eventual `print: not found' is hidden reliably.
+
+	Fix compilation of program sources on AIX.
+	* tests/lt_dlopenext.at (lt_dlopenext error messages): Do not
+	use $LIBTOOL when compiling plain object, AIX by default does
+	not enable static archives.
+	* tests/ltdl-libdir.at (libdir of installed modules): Likewise.
+	Report by Rainer Tammer.
+
+	Do not call toplevel configure in non-VPATH build.
+	* tests/deplibs-mingw.at (deplibs without file command): Use
+	LT_AT_CONFIGURE for consistency, update comment about why it
+	might fail.
+	* tests/pic_flag.at (override pic_flag at configure time): Skip
+	test if we are building in-tree.
+	Report by Rainer Tammer.
+
+	Allow running pic_flag test with different shell.
+	* tests/testsuite.at (LT_AT_CONFIGURE): Accept optional second
+	argument specifying the configure script to run.
+	* tests/pic_flag.at (override pic_flag at configure time):
+	Use LT_AT_CONFIGURE.
+
+	Ensure not to reverse preserving of --debug for relinking/finish.
+	* libltdl/config/ltmain.m4sh (func_check_version_match): Only
+	preserve '--debug' switch if $opt_debug is not equal to ':'.
+	* tests/help.at (debug tracing): New test group.
+	Report by Rainer Tammer.
+
+2010-08-06  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix AC_NO_EXECUTABLES test failure on AIX.
+	* libltdl/m4/libtool.m4 (_LT_SYS_MODULE_PATH_AIX): Wrap link
+	test in AC_CACHE_VAL, using cache variable $lt_cv_aix_libpath.
+	* tests/no-executables.at (AC_NO_EXECUTABLES): Preset it, to
+	avoid link test.
+	Bug report by Rainer Tammer.
+
+	Fix ltdl-libdir test for C++ compilers.
+	* tests/ltdl-libdir.at (libdir of installed modules): Declare
+	module function as extern "C".
+
+2010-08-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Let `libtool' without arguments point to `--help' again.
+	* libltdl/config/ltmain.m4sh (func_check_version_match):
+	Remove duplicate and wrong error check.
+	* tests/help.at (standard command line options): Extend test.
+	Report by Rainer Tammer.
+
+	Avoid syntax error due to shift of nonexistent parameter.
+	* libltdl/config/ltmain.m4sh <command-line handling>: Only shift
+	if there is a positional parameter to shift.  Fixes `libtool
+	--help' when dash is used.
+	Report by Rainer Tammer.
+
+	Fix testsuite errors due to shell quoted parameter expansion issue.
+	* tests/getopt-m4sh.at (_LT_AT_GETOPT_M4SH_SETUP): Insert space
+	between double-quoted and unquoted shell parameter, as bash
+	4.0.28 doesn't add one in its output if the expansion of the
+	second one starts with a space.
+	(short option splitting, enhanced shell short option splitting)
+	(long option splitting, XSI long option splitting): Add space in
+	expected output.
+	Fixes testsuite failures on AIX, FreeBSD, etc.
+	Report by Rainer Tammer.
+
+2010-08-03  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix build failure with AIX sh due to shell quoting error.
+	* libltdl/config/ltmain.m4sh (func_append_quoted): Document
+	that this function inserts a separator space.
+	(func_mode_compile): Do not pass extra space here.
+	Fixes regression introduced in v2.2.10-49-gc13532a.
+	Report by Rainer Tammer.
+
+2010-08-02  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix pic_flag test unportabilities.
+	* tests/pic_flag.at (override pic_flag at configure time): Skip
+	test if the compiler produces a warning containing `fpic'.
+	Do not use nonportable `grep -e', for Solaris.
+	Report by Charles Wilson.
+
+2010-08-01  Paolo Bonzini  <bonzini@gnu.org>
+
+	Fix bug in postdeps computation
+	* libltdl/m4/libtool.m4 (_LT_SYS_HIDDEN_LIBDEPS): Actually
+	concatenate $prev and $p.
+
+2010-07-26  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Don't always skip XSI tests
+	* tests/getopt-m4sh.at: Use new signature as implemented by
+	de8a0992b21b76a13c302cf48588ad5f6042595c, when determining
+	whether to test Extended-shell functions.
+
+2010-07-18  Peter Rosin  <peda@lysator.liu.se>
+
+	* tests/stresstest.at: Link with main.lo when liba is shared
+	and linking main with -no-install.
+
+2010-07-18  Peter Rosin  <peda@lysator.liu.se>
+
+	* tests/stresstest.at [MSVC]: dllimport all imported
+	variables.
+
+2010-07-17  Peter Rosin  <peda@lysator.liu.se>
+
+	dllimport the variable for MSVC in link-order.at
+	* tests/link-order.at [MSVC]: Makes the test pass by dllimporting
+	imported variables when working with shared libraries.
+
+2010-07-08  Peter Rosin  <peda@lysator.liu.se>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Make preloading heed libname_spec.
+	Fixes testsuite failure for lt_dladvise.at on MSYS/MSVC.
+	* libltdl/ltdl.c (libprefix): New static variable describing
+	the prefix of static archives.
+	(try_dlopen): Use libprefix.
+	* libltdl/m4/ltdl.m4 (_LTDL_SETUP): Export prefix of static
+	archives to config.h. Also fix assignment of LTDLOPEN to be more
+	efficient and less error prone while at it.
+
+2010-07-08  Gary V. Vaughan  <gary@gnu.org>
+
+	Rename _LT_PROG_XSI_REPLACE macro to _LT_PROG_FUNCTION_REPLACE.
+	* libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Rename to
+	_LT_PROG_REPLACE_SHELLFNS.
+	(_LT_PROG_XSI_REPLACE): Rename to _LT_PROG_FUNCTION_REPLACE.
+	(_LT_PROG_FUNCTION_REPLACE): Change decorator comment to use
+	'Extended shell' rather than 'XSI' on successful replacement.
+	* libltdl/config/general.m4sh (func_dirname, func_basename)
+	(func_dirname_and_basename, func_stripname): Change decorator
+	comment to use 'extended shell' rather than 'XSI' on fallback
+	implementations.
+	* libltdl/config/getopt.m4sh (func_split_short_opt)
+	(func_split_long_opt): Ditto.
+	* libltdl/config/ltmain.m4sh (func_append, func_append_quoted)
+	(func_arith, func_len, func_lo2o, func_xform): Ditto.
+	* tests/getopt-m4sh.at (_LT_AT_XSI_FUNC_EXTRACT): Rename to
+	_LT_AT_EXTENDED_SHELL_FUNC_EXTRACT.
+	(_LT_AT_EXTENDED_SHELL_FUNC_EXTRACT): Change regular expression to
+	match new replacable function decorator comments.
+
+2010-07-08  Peter Rosin  <peda@lysator.liu.se>
+
+	Optimize assignment of output_la.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Save two fork/exec
+	instances.
+	Report by Ralf Wildenhues.
+
+2010-07-08  Gary V. Vaughan  <gary@gnu.org>
+
+	Fix a cut-n-pasto in "2010-07-07 Charles Wilson" patch.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Remove spurious
+	variable dereference.
+
+2010-07-07  Gary V. Vaughan  <gary@gnu.org>
+
+	Tidy m4 comment header underline.
+	* libltdl/m4/libtool.m4 (_LT_CHECK_SHAREDLIB_FROM_LINKLIB): Make
+	sure hyphens in function name comment header underline line up.
+
+2010-07-07  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[cygwin|mingw] fix dlpreopen with --disable-static
+	* libltdl/config/general.m4sh (func_tr_sh): New function.
+	* libltdl/config/ltmain.m4sh (func_generate_dlsyms) [cygwin|mingw]:
+	Obtain DLL name corresponding to import library by using value
+	stored in unique variable libfile_$(transliterated implib name).
+	If that fails, use $sharedlib_from_linklib_cmd to extract DLL
+	name from import library directly. Also, properly extract dlsyms
+	from the import library.
+	(func_mode_link) [cygwin|mingw]: Prefer to dlpreopen DLLs
+	over static libs when both are available.  When dlpreopening
+	DLLs, use linklib (that is, import lib) as dlpreopen file,
+	rather than DLL. Store name of associated la file in
+	unique variable libfile_$(transliterated implib name)
+	for later use.
+	(func_win32_libid): Accomodate pei-i386 import libs
+	as well as pe-i386.
+	(func_cygming_dll_for_implib): New function.
+	(func_cygming_dll_for_implib_fallback): New function.
+	(func_cygming_dll_for_implib_fallback_core): New function.
+	(func_cygming_gnu_implib_p): New function.
+	(func_cygming_ms_implib_p): New function.
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS): Adjust sed
+	expressions for lt_cv_sys_global_symbol_to_c_name_address and
+	lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+	as trailing space after module name is optional.
+	(_LT_LINKER_SHLIBS) [cygwin|mingw][C++]:
+	Set exclude_expsyms correctly for $host. Simplify regular
+	expression in export_symbols_cmds.
+	(_LT_LINKER_SHLIBS) [cygwin|mingw|pw32][C]: Set exclude_expsyms
+	correctly for $host. Enable export_symbols_cmds to identify
+	DATA exports by _nm_ prefix.
+	(_LT_CHECK_SHAREDLIB_FROM_LINKLIB): New macro sets
+	sharedlib_from_linklib_cmd variable.
+	(_LT_DECL_DLLTOOL): New macro ensures DLLTOOL is always set.
+
+2010-07-05  Peter Rosin  <peda@lysator.liu.se>
+
+	* tests/export.at [MSVC]: dllimport all imported variables.
+
+2010-07-01  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+	    Peter Rosin  <peda@lysator.liu.se>
+
+	Support for response files with $NM.
+	* libltdl/m4/libtool.m4 (_LT_CMD_GLOBAL_SYMBOLS)
+	<nm_file_list_spec>: New tag variable. Set it to '@' if input
+	files can be passed to $NM in a file named with the '@' option.
+	* libltdl/config/ltmain.m4sh (func_mode_link): When
+	nm_file_list_spec is nonempty, use it to avoid skipped_export.
+	* doc/libtool.texi (libtool script contents): Document
+	new variable.
+
+2010-07-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix ccache test for MSVC.
+	* tests/static.at (ccache -all-static): Ignore compiler stderr.
+	Reported by Peter Rosin.
+
+2010-07-03  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	Avoid false failures caused by filesystem interaction
+	* tests/dlloader-api.at (dlloader API): Use uglified names for
+	pseudo-modules.
+
+2010-07-03  Peter Rosin  <peda@lysator.liu.se>
+
+	Fix typo in "Add func_append_quoted and do..."
+	* libltdl/config/ltmain.m4sh (func_mode_compile): Use
+	func_append_quoted instead of func_append.
+
+2010-07-02  Peter Rosin  <peda@lysator.liu.se>
+
+	Don't trigger file name expansion when embedding manifests.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS)
+	[ cygwin, mingw, cegcc ] <cl*>: Remove all spaces in the
+	case statement of postlink_cmds to make file name expansion
+	more unlikely.
+	(_LT_LANG_CXX_CONFIG): Likewise, but also add the missing |.
+
+2010-07-01  Peter Rosin  <peda@lysator.liu.se>
+
+	Fix regression caused by "Add func_append_quoted and do..."
+	* libltdl/config/ltmain.m4sh (func_mode_link): Remove leftover
+	"_libs" trash.
+
+2010-06-28  Peter Rosin  <peda@lysator.liu.se>
+
+	For MSVC, embed the manifest as a resource in the executable.
+	Fixes a lot of testsuite failures with MSVC 2003 (v8.0) and
+	above (and perhaps also MSVC .Net) related to running programs
+	that have been moved (e.g. installed) without their manifests
+	also having been moved.
+	* libltdl/m4/libtool.m4 (_LT_PATH_MANIFEST_TOOL): New macro
+	that locates the Manifest Tool (mt) and verifies that it is
+	indeed the manifest tool. The result is stored in the new
+	variable MANIFEST_TOOL.
+	(_LT_LINKER_SHLIBS) <postlink_cmds>: New tag variable.
+	[ cygwin, mingw, cegcc ] <cl*>: Embed the manifest file as a
+	resource. Make sure the embedding work regardless of if the
+	@OUTPUT@ file name includes a trailing $EXEEXT.
+	(_LT_LANG_CXX_CONFIG): Likewise.
+	(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG): Require the above
+	_LT_PATH_MANIFEST_TOOL.
+	* libltdl/config/ltmain.m4sh (func_mode_link): After linking
+	a program, replace @OUTPUT@ in $postlink_cmds and then execute
+	the commands.
+	* doc/libtool.texi (libtool script contents): Document
+	new postlink_cmds variable.
+	(LT_INIT): Add that the MANIFEST_TOOL environment variable can
+	be used to override the manifest tool to use.
+	* tests/exeext.at: New. Make sure linking with both -o prog
+	and -o prog$EXEEXT works.
+	* Makefile.am (TESTSUITE_AT): Update.
+	(TESTS_ENVIRONMENT): Propagate $(MANIFEST_TOOL) to the
+	testsuite.
+	* NEWS: Add note of the new MANIFEST_TOOL environment variable.
+
+2010-06-24  Peter Rosin  <peda@lysator.liu.se>
+
+	Add MSVC support.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER)
+	(_LT_LINKER_SHLIBS, _LT_LANG_CXX_CONFIG) [mingw, cygwin]: Add
+	support for the Microsoft C/C++ Compiler (cl) relying on help
+	from the compile script in Automake.
+	* NEWS: Add note of the above.
+
+2010-07-01  Gary V. Vaughan  <gary@gnu.org>
+
+	Skip `enhanced shell option appending' test when not available.
+	* tests/getopt-m4sh.at [enhanced shell option appending]:
+	_LT_AT_XSI_FUNC_EXTRACT will not be able to find the enhanced
+	libtool func_append function if the replacement wasn't substituted
+	by configure, since the decorator comments will be different - in
+	that case simply skip the test.
+
+2010-06-30  Gary V. Vaughan  <gary@gnu.org>
+
+	Add func_append test cases for smart and retarded implementations.
+	* tests/getopt-m4sh.at (_LT_AT_FALLBACK_FUNC_EXTRACT): New
+	macro to extract a fallback function implementation from
+	ltmain.m4sh.
+	[option appending]: Use it for a test of the fallback
+	implementation of func_append.
+	[enhanced shell option appending]: And also test the enhanced
+	implementation.
+	* libltdl/config/ltmain.m4sh (func_append_quoted): Fix missing \\
+	to escape a quoted space for eval.
+	* libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Fix missing $ in
+	dereference of func_append inline replacement for retarded
+	shells.
+
+2010-06-29  Gary V. Vaughan  <gary@gnu.org>
+
+	Correct func_split_short_opt comment cut-n-pasto.
+	* libtool/config/getopt.m4sh (func_split_short_opt): Fix
+	the function comment.
+
+	Use a real XSI compliant func_split_short_opt substitution.
+	* libtool/m4/libtool.m4 (_LT_CHECK_SHELL_FEATURES): Remove
+	test ${foo:n:m} substrings, instead adding a ${foo%??} check
+	to the existing XSI tests.
+	(_LT_PROG_XSI_SHELLFNS): Remove the ${foo:n:m} based
+	func_split_short_opt substitution in favour of a properly
+	XSI compliant substitution.
+	Suggested by Paolo Bonzini.
+
+2010-06-28  Gary V. Vaughan  <gary@gnu.org>
+
+	Add func_append_quoted and do inline func_append substitutions.
+	* libtool/config/ltmain.m4sh: Replace all occurrences of
+	`foo="$foo bar"' with func_append. No decorator comment was
+	added since /func_append [a-zA-Z0-9_]* "/ is already an
+	excellent match regexp, and additional comments would only
+	complicate things.
+	(func_append_quoted): New function that quotes a value with
+	func_quote_for_eval before appending it.  To avoid quoting the
+	whitespace in the passed value, a single whitespace is added
+	automatically.  Changed callers where possible.
+	* libtool/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Perform a
+	`+=' implementation substitution for func_append_quoted.  More
+	importantly, systematically replace matching func_append calls
+	with inline `+=' when supported (for maximum speed), and
+	longhand `foo="$foo bar"' otherwise to avoid the function
+	overhead.
+
+	Add an XSI replacement for func_split_short_opt, with test cases.
+	* libltdl/config/getopt.m4sh (m4go_shortnoargs): Remove 'v' now
+	that getopt.m4sh doesn't steal that letter for the --version
+	short option.
+	* libltdl/config/ltmain.m4sh (M4SH_GETOPTS): We can now use 'v'
+	as a short option for '--verbose'.
+	* libltdl/config/getopt.m4sh (m4go_printopts): Add back in the
+	leading '-' for remaining non-argument short options.
+	(func_split_short_opt): Use the correct sed script variable.
+	* libltdl/m4/libtool.m4 (_LT_CHECK_SHELL_FEATURES): Also ensure
+	that XSI substring extraction is supported.
+	(_LT_PROG_XSI_SHELLFNS): Use XSI substring extraction to split
+	short options to avoid unnecessary forks if the host shell
+	supports that.
+	* tests/getopt-m4sh.at: New tests for getopt.m4sh coverage.
+	* Makefile.am (TESTSUITE_AT): Add getopt-m4sh.at.
+	(TESTS_ENVIRONMENT): Pass M4SH and SED for substition into the
+	m4sh expansion performed in tests/getopt-m4sh.at.
+
+2010-06-27  Gary V. Vaughan  <gary@gnu.org>
+
+	Add missing case branch terminators.
+	* libltdl/config/ltmain.m4sh: Fixed everal case branches with
+	missing ';;' terminators.
+
+	Use TAB-SPACE in preference to SPACE-TAB.
+	* libltdl/m4/libtool.m4 (_LT_PROG_XSI_REPLACE): Some editors
+	might optimise away the SPACE in SPACE-TAB sequences, so use
+	TAB-SPACE just in case.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	Amend a missed opt_mode rename instance in ltmain.m4sh.
+	* libltdl/config/ltmain.m4sh <mode>: Rename to opt_mode.
+
+	Fix portability regressions in today's earlier changeset.
+	* libltdl/m4/libtool.m4 (_LT_PROG_XSI_REPLACE): `sed -i' is not
+	portable; use `mv -f ...|| cp -f ...' instead.
+	Add an initial backslash to sed `c' substitutions with leading
+	whitespace, so that indentation is not removed by some non-POSIX
+	compliant sed implementations.
+	(_LT_PROG_XSI_SHELLFNS): Display a diagnostic warning message if
+	one or more XSI function replacements failed.
+
+	getopt.m4sh generated libtool option parser, and XSI improvements.
+	* libltdl/m4/libtool.m4 (_LT_PROG_XSI_SHELLFNS): Moved portable
+	shell versions of various utility functions from here...
+	* libltdl/config/getopt.m4sh (func_split_long_opt): ...to here...
+	* libltdl/config/general.m4sh (func_dirname, func_basename)
+	(func_dirname_and_basename, func_strip_name): ...here...
+	* libltdl/config/ltmain.m4sh (func_append, func_arith, func_len)
+	(func_lo2o, func_xform): ...and here.
+	* libltdl/config/libtool.m4 (_LT_PROG_XSI_REPLACE): New macro that
+	expands into a sed command for replacing the contents of a
+	suitably decorated shell function with an alternate XSI
+	implementation.
+	(_LT_PROG_XSI_SHELLFNS): Use it to replace the portable shell
+	versions of the functions above with equivalent XSI
+	implementations that avoid unnecessary forks if the host shell
+	supports that.
+	* libltdl/config/ltmain.m4sh: Replace hand written shell code
+	with a call to M4SH_GETOPTS. Rename some option variables in
+	the client code to match the generated option parser settings.
+	* libltdl/config/general.m4sh (func_echo, func_error)
+	(func_warning): Use $opt_mode instead of obsoleted $mode in
+	message leader.
+	* libltdl/config/getopt.m4sh (m4_version_prereq): This file
+	requires m4sugar.m4 from Autoconf-2.61 or newer. 
+
+2010-06-24  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[cygwin] Refactor C++ exception handling for Win32 correctness
+	* tests/exception.at (common.h): New file, refactored from
+	(module.h): Move declaration of modexc to libcommon.
+	Include common.h. Use explicit import/export markings for
+	symbols when building on win32 or cygwin.
+	(common.cpp): New file.
+	(module.cpp): Ensure correct symbols markings when including
+	module.h.
+	(lib.h): Use explicit import/export markings for symbols
+	when building on win32 or cygwin.
+	(lib.cpp): Ensure correct symbol markings when including lib.h.
+	(main.cpp): Include common.h.
+	(commands): Ensure correct symbol markings when compiling
+	main.cpp, and lib.cpp, and module.cpp. Add command to compile
+	common.cpp, and to link libcommon.la.  Add libcommon.la when
+	linking module.la and main.  Add command to install libcommon.la.
+
+2010-06-21  Gary V. Vaughan  <gary@gnu.org>
+
+	Ensure getopts.m4sh is compatible with Autoconf-2.61 and newer.
+	* libltdl/config/getopt.m4sh (m4_chomp): Ensure this macro is
+	implemented even if Autoconf's m4sugar.m4 doesn't provide it.
+	(m4go_expand): New macro based on Autoconf-2.64 m4_expand. Use
+	it everywhere incase m4sugar.m4 doesn't have an implementation.
+	(m4_ifnblank): Replace all uses with m4_ifval, which was
+	available long before m4_ifnblank was introduced.
+
+2010-06-20  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix clean mode for HP-UX 11.31 sh.
+	* libltdl/config/ltmain.m4sh (func_mode_uninstall): Do not try
+	to match a null string in a case pattern, even with surrounding
+	spaces.  Fixes `lt_dlopenadvise library loading' test.
+
+	Add comment for exception handling module unloading issue.
+	* tests/exceptions.at (C++ exception handling): Add comment
+	for last patch.
+
+	Fix flags test failure when ld is used as linker.
+	* tests/flags.at (passing CC flags through libtool): When $LD
+	is used for linking libraries, ensure flags passed with `-Wc,'
+	are not passed through to $LD, but flags passed with `-Wl,' use
+	$wl when linking programs.  Fixed testsuite failure on HP-UX
+	10.20.
+
+2010-06-19  Charles Wilson  <libtool@cwilson.fastmail.fm>
+
+	[cygwin] Fix segfault in C++ exception handling test
+	* tests/exceptions.at (main.cpp:exceptions_in_module):
+	Move dlclose outside catch block; otherwise __cxa_end_catch
+	(part of the cygwin g++ ABI) accesses pointers to data inside
+	unloaded DLL. This is a platform ABI-specific bug, but is
+	likely common to many platforms' g++ and/or other C++
+	compilers.
+
+2010-06-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix srcdir computation for manual runs of old tests.
+	* tests/defs.m4sh: Strip trailing `/tests' from srcdir, to allow
+	`$srcdir/tests/FOO.test' to be run from the top build directory.
+
+	Clean up @var handling in the manual.
+	* doc/libtool.texi: Throughout the manual, replace @var with
+	@samp or @code as appropriate, ensure the argument of remaining
+	@var uses are lower-case.
+
+	Let the bootstrap script fail upon errors.
+	* bootstrap: Enable errexit.
+
+	Fix execute mode test for OSF/1 5.1.
+	* tests/execute-mode.at (execute mode): Do not use grep -F
+	with an empty pattern.
+	* THANKS: Update.
+	Report by Jay K.
+
+	Use config.cache variable for PIC flag, to allow override.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC) <lt_prog_compiler_pic>:
+	Save result, and allow override, through cache variable
+	lt_cv_prog_compiler_pic{,_CXX,_F77,_FC}.  The cache variable
+	needs to contain an eventual -DPIC.
+	* tests/pic_flag.at (override pic_flag at configure time):
+	New file, new test.
+	* Makefile.am (TESTSUITE_AT): Update.
+	* NEWS, THANKS: Update.
+	Suggestion by Joakim Tjernlund and Paolo Bonzini.
+
+2010-06-16  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Optimize func_ltwrapper_scriptname to assume a cwrapper.
+	* libltdl/config/ltmain.m4sh (func_ltwrapper_scriptname): Do not
+	call func_ltwrapper_executable_p again here, this function is
+	documented to allow being called with wrapper executables.
+
+	Fix bootstrap script to cope with changed AC_INIT arguments.
+	* bootstrap: When extracting PACKAGE and VERSION from AC_INIT
+	arguments, be sure to remove a 'GNU ' prefix and lowercase the
+	package name for PACKAGE.  Also set PACKAGE_NAME and PACKAGE_URL
+	appropriately for GNU software.  Pass these variables to the
+	make commands creating tests/package.m4 and other files.
+	* Makefile.am (edit): Fix substitution of PACKAGE_NAME and
+	PACKAGE_STRING.
+	* libltdl/config/announce-gen.m4sh: Use @PACKAGE@ not
+	@PACKAGE_STRING@.
+
+2010-06-15  Peter Rosin  <peda@lysator.liu.se>
+
+	On Windows, find potential libs regardless of file name case.
+	* libltdl/m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD),
+	libltdl/config/ltmain.m4sh (func_mode_link): On Windows,
+	find potential libs regardless of file name case.
+	* tests/nocase.at: New test, to check for regressions
+	of the above.
+	* Makefile.am: Add above new test.
+	* doc/libtool.texi (libtool script contents): Document
+	new variables.
+	* NEWS: Updated.
+
+2010-06-15  Philip Allison  <philip.allison@smoothwall.net>  (tiny change)
+
+	Avoid GCC -Wall compiler warning in dlopen self test.
+	* libltdl/m4/libtool.m4 (_LT_TRY_DLOPEN_SELF): Fix unused
+	variable warning in test program.
+	* THANKS: Update.
+
+2010-06-15  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix cleaning of uninstalled w32 shell wrapper in subdirs.
+	* libltdl/config/ltmain.m4sh (func_mode_uninstall): Do not
+	override global objdir variable, instead use odir for the
+	directory of to-be-removed files.  Drop unneeded origobjdir.
+	Report by Charles Wilson.
+
+2010-06-14  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Enable colored Autotest testsuite output if available.
+	* tests/testsuite.at: Move AT_INIT call down to late in the
+	file, all prior code can go beforehand.
+	Call AT_COLOR_TESTS if defined.
+
+2010-06-14  Peter O'Gorman  <peter@pogma.com>
+
+	Pass resident test with --disable-shared too.
+	* tests/resident.at: use LTDL_SET_PRELOADED_SYMBOLS.
+
+2010-06-13  Peter O'Gorman  <peter@pogma.com>
+
+	Test with --disable-shared at release time too.
+	* HACKING: Note it.
+
+	Avoid failure for --disable-shared.
+	* tests/lt_dladvise.at: Hack.
+
+	Use LTDL_SET_PRELOADED_SYMBOLS to avoid failure.
+	* tests/exceptions.at: Use it.
+
+2010-06-13  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Print Libtool project URL in program --help output.
+	* configure.ac (AC_INIT): Set PACKAGE argument to `GNU Libtool',
+	so Autoconf knows this is GNU software.  For Autoconf < 2.64,
+	if AC_PACKAGE_URL is not defined, substitute PACKAGE_URL.
+	* Makefile.am (edit): Substitute PACKAGE_URL.
+	($(srcdir)/tests/package.m4): Also depend on Makefile.am.
+	Define AT_PACKAGE_URL, for `tests/testsuite --help' output.
+	* libltdl/config/getopt.m4sh (func_help): Also extract comment
+	lines that mention a home page and general GNU help.
+	* libltdl/config/ltmain.m4sh: Use @PACKAGE_BUGREPORT@ instead of
+	hard-coded list address.  Also mention Libtool home page and
+	general GNU help web page.
+	* libtoolize.m4sh: Likewise.
+
+2010-06-12  Peter Rosin  <peda@lysator.liu.se>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Improve libdir usage from within ltdl on MinGW.
+	* libltdl/ltdl.c (parse_dotla_file) [__WINDOWS__]: Read the
+	libdir entry in the .la file, but accept it only if it is not
+	a unix-style absolute name.
+	* tests/ltdl-libdir.at: New test that checks if ltdl finds an
+	installed module via the libdir variable in the .la file.  On
+	MinGW, use a Windows-style libdir name including drive spec.
+	* Makefile.am: Add above.
+
+2010-06-11  Peter O'Gorman  <peter@pogma.com>
+
+	Skip bindir install test if we're not building shared.
+	* tests/bindir.at: Skip install test if necessary.
+	* THANKS: Update.
+	Report by Michael E Faenza.
+
+2010-06-11  Gary V. Vaughan  <gary@gnu.org>
+
+	Use getopt.m4sh to generate libtoolize option parser.
+	* libtoolize.m4sh: Replace hand written shell code with a
+	call to M4SH_GETOPTS.  Move some premature initialization
+	from the preamble to the main part of the script.  Exit with
+	an error on spurious additional non-option arguments.
+	(envopts): Integrate LIBTOOLIZE_OPTIONS pre-parsing into the
+	main option parsing loop.
+	(opt_copy): Use in place of and in the reverse sense of the
+	old opt_link variable.
+
+2010-06-10  Peter O'Gorman  <peter@pogma.com>
+
+	Create reloadable object files with non-pic objects too.
+	* libltdl/config/ltmain.m4sh: When not building a shared
+	library, use the non-pic objects to create a reloadable
+	object, because pic objects do not exist.
+
+2010-06-10  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Ensure libltdl is up to date for check-local.
+	* Makefile.am (LTDL_BOOTSTRAP_DEPS): New variable.
+	(all-local): Use it to simplify dependencies.
+	(testsuite_deps_uninstalled): Add $(LTDL_BOOTSTRAP_DEPS).
+	Report by Peter Rosin.
+
+2010-06-10  Gary V. Vaughan  <gary@gnu.org>
+
+	Support shell tracing inside functions even with ksh.
+	* libltdl/config/getopt.m4sh: Set $opt_debug to be either `:'
+	or `set -x' depending on whether --debug was parsed to match
+	usage in libtoolize.m4sh and ltmain.m4sh.
+	* clcommit.m4sh, libltdl/config/announce-gen.sh: Instead of
+	`$opt_debug && ...', use `test "$opt_debug" != ":" && ...'.
+	* clcommit.m4sh, libltdl/config/announce-gen.m4sh,
+	libltdl/config/getopt.m4sh, libltdl/connfig/mailnotify.m4sh:
+	Execute at the start of functions to cater to ksh, which
+	resets `-x' inside shell functions.
+
+	Fix a typu in HACKING.
+	* HACKING (Release Procedure): s/Makeflie/Makefile/.
+
+2010-06-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Factorize testing gcj installation in the testsuite.
+	* tests/testsuite.at (LT_AT_TAG): For the GCJ tag, actually
+	try to compile a .java file when deciding whether to skip.
+	(LT_AT_EXEC_TAG): New macro, to also ensure runnability.
+	* tests/convenience.at (Java convenience archives): Use
+	LT_AT_EXEC_TAG, simplify accordingly.
+	* tests/flags.at (passing lt_tag flags through libtool): Use
+	m4_defn for tag so LT_AT_TAG works.
+	* tests/infer-tag.at (GCJ inferred tag): Simplify.
+	* THANKS: Update.
+	Report by Warren Dodge.
+
+2010-06-09  Peter O'Gorman  <peter@pogma.com>
+
+	Skip demo-nopic tests if SELinux policy will cause failure.
+	* tests/demo-nopic.test: Check SELinux policy and skip if
+	necessary.
+
+2010-06-09  Gary V. Vaughan  <gary@gnu.org>
+
+	Set SCM version number to 2.2.11a.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.11a.
+	* NEWS: Updated.
+
+	GNU Libtool 2.2.10 was released.
+
+	Prepare for next release.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version number
+	to 2.2.10.
+	* NEWS: Update version number.
+
+	Fix a quoting bug with ./commit -a 'A U Thor'.
+	* clcommit.m4sh (func_commit): Use func_show_eval when calling
+	git, so that the previously func_quote_for_eval()ed $git_flags is
+	expanded properly.
+
+2009-09-15  Peter Rosin  <peda@lysator.liu.se>
+
+	Don't try the MSYS libdir path on MinGW.
+	* libltdl/ltdl.c (parse_dotla_file) [mingw]: The absolute
+	libdir path in the .la file is recorded as an MSYS (POSIX
+	style) path. Make sure it isn't tried when locating the
+	shared library.
+	* NEWS: Updated.
+
+2010-06-09  Gary V. Vaughan  <gary@gnu.org>
+
+	Simplify license variations, and add missing license texts.
+	* ChangeLog, ChangeLog.1996, ChangeLog.1997, ChangeLog.1998,
+	ChangeLog.1999, ChangeLog.2000, ChangeLog.2001, ChangeLog.2002,
+	ChangeLog.2003, ChangeLog.2004, ChangeLog.2005, ChangeLog.2006,
+	ChangeLog.2007, ChangeLog.2008, ChangeLog.2009, NEWS: Add
+	all-permissive license.
+	* HACKING, README, README.alpha, TODO: Relax license to RMS
+	encouraged all-permissive terms.
+	* libltdl/README: Ditto. I added the original license text in
+	2007, and there's no need for it to be so long for such a trivial
+	file.
+	* libltdl/config/getopt.m4sh, libltdl/general.m4sh: Cvs-utils is
+	dead, and I am the author of these files, so consolidated license
+	terms to match regular Libtool licensing.
+	* HACKING (Licensing Rules): Update wording, and list of files for
+	the all permissive license.
+	(GPL with CVS-Utils exception clause): Removed.  No files have these 
+	license any more.
+	(GPL with Libtool exception clause): Ditto, only libltdl/README
+	used to be distributed with this variation.
+	* AUTHORS: Add GPL license text.
+	
+	Fix a type in the 2.2.8 release notes.
+	* NEWS: s/ romoted/ promoted/ in the 2.2.8 release notes.
+
+	Don't warn about the blank line inserted into git commit message.
+	* clcommit.m4sh: When searching for accidental commits of mutliple
+	changes, ignore the second line of the message, which we inserted
+	earlier to support "git log --oneline".
+
+	Enable correct extraction of multiline copyright from --version.
+	* libltdl/config/getopt.m4sh: Wrap copyright notice at 76
+	columns.
+	(func_version): Don't omit spaces when merging multiline copyright
+	notices.
+	* clcommit.m4sh, libtoolize.m4sh: Wrap copyright notice at 76
+	columns.
+
+	* NEWS (2.2.8): BlueGene compiler tests were performed on BG/P
+	systems, not BG/L.
+	Reported by Christian Rössel <christian.roessel@gmx.de>
+
+2010-06-08  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix testsuite helper macros to not hide failure.
+	* tests/testsuite.at (LT_AT_CONFIGURE, LT_AT_MAKE):
+	Do not wrap AT_CHECK in a subshell, so that failures are
+	properly propagated; instead, move environment changes inside
+	the AT_CHECK code.
+	Report and analysis by Peter Rosin.
+
+	Avoid autom4te warning about unnamed diversion.
+	* libltdl/config/getopt.m4sh: Use diversion name KILL not -1.
+
+2010-06-07  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Make versioning test stricter for w32, enable shared libs.
+	* tests/versioning.at (versioning): Add -no-undefined to
+	LDFLAGS.
+	(test_uninstalled): Also move $bindir out of the way
+	temporarily.
+
+	Fix versioning test for LDFLAGS=-Wl,--as-needed.
+	* tests/versioning.at (versioning): For the library update
+	hypotheses, ensure the unchanged library libb isn't accidentally
+	relinked against the new liba, by not reinstalling libb.
+	Fixes testsuite failure for the incompatible update case with
+	LDFLAGS=-Wl,--as-needed.
+	* THANKS: Update.
+	Report by Ryan Hill.
+
+2010-06-06  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Rewrite manual intro to be gender-neutral.
+	* doc/libtool.texi (Introduction): Use gender-neutral
+	formulation when addressing developers.
+
+2010-06-05  Gary V. Vaughan  <gary@gnu.org>
+
+	Update and simplify all m4sh scripts to use latest getopt.m4sh.
+	* clcommit.m4sh, libltdl/config/mailnotify.m4sh: Rewrite option
+	parsing loop over M4SH_GETOPTS macro, and adjust all clients of
+	option variables to use generated option names.
+
+	Add missing quote for literal ? in a shell case statement.
+	* libltdl/config/getopt.m4sh (m4go_shortnoargs): Quote initial ?
+	correctly for use in a shell case statement.
+
+	Quote command line arguments after --rcfile properly.
+	* libltdl/config/announce-gen.m4sh (--rcfile): Quote remaining
+	arguments shell variable expression correctly for eval.
+	
+	Shift correctly in numbered option argument collection.
+	* libltdl/config/getopt.m4sh (_m4go_option): Argument list also
+	needs to be `shift'ed in the shell option loop after processing a
+	numbered argument collection.
+
+	Fetch from new upstream host for config.guess and config.sub.
+	* Makefile.maint (WGET_CGIT): Location of newest config.guess and
+	config.sub upstream.
+	(fetch): Fetch config.guess and config.sub from WGET_CGIT, rather
+	than no-longer-updating WGET_SGO location.
+
+	Update generated upload directive file format to v1.1.
+	* Makefile.maint (git-dist, diffs): Update to generate v1.1 format
+	directive files for ftp://ftp-upload.gnu.org/incoming/ftp.
+
+	Fix web manual generation details in release instructions.
+	* HACKING (Release Procedure): Move the instruction for generating
+	web manuals for a new release to before the instruction that bumps
+	the version numbers to the post release values.
+
+	Set SCM version number to 2.2.9a.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.9a.
+	* NEWS: Updated.
+
+	GNU Libtool 2.2.8 was released.
+
+	Prepare for next release.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.8.
+	* NEWS: Update version number.
+	* INSTALL, libltdl/config/install-sh, libltdl/config/config.guess,
+	libltdl/config/config.sub, libltdl/config/texinfo.tex: Updated
+	from canonical source.
+
+	Provide an m4sh reimplementation of announce-gen.
+	* libltdl/config/getopt.m4sh (M4SH_GETOPTS): New macro that takes
+	a quoted m4 list of command line options to be parsed, and
+	generates the shell code to parse those options and collect the
+	results into appropriately named 'opt_xxx' shell variables.  Also,
+	add some private supporting macros, and improve the comments
+	radically.
+	* libltdl/config/announce-gen.m4sh: New file, to generate and
+	optionally post (an enhancement over the gnulib perl script of the
+	same name) a release announcement.
+	* Makefile.maint (announce-gen): Build a new announce-gen script
+	in the build directory, from the contents of
+	libltdl/config/announce-gen.m4sh.
+	* HACKING (Release Procedure): Update the instructions to use
+	announce-gen.
+	(Alpha release note template, Full release note template):
+	Removed.
+
+2010-05-22  Gary V. Vaughan  <gary@gnu.org>
+
+	Support "git log --oneline" in generated commit messages.
+	* clcommit.m4sh (func_check_commit_msg): Insert an empty line
+	between the ChangeLog entry summary line and the ChangeLog entry
+	body, so that "git log --oneline" works properly.
+	Bump copyright and version number.
+	Reported by Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+2010-05-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	* HACKING: Set Reply-To: in announcement emails.
+
+2010-05-21  Gary V. Vaughan  <gary@gnu.org>
+
+	Set SCM version number to 2.2.7c.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.7c.
+	* NEWS: Updated.
+
+	GNU Libtool 2.2.7b  was released.
+
+	Prepare for next release candidate.
+	* configure.ac, libltdl/configure.ac (AC_INIT): Bump version
+	number to 2.2.7b.
+	* libltdl/m4/libtool.m4, libltdl/m4/ltdl.m4,
+	libltdl/m4/ltoptions.m4, libltdl/m4/lt~obsolete.m4: These files
+	have been updated without a serial bump since the last release.
+	* libltdl/Makefile.inc (LTDL_VERSION_INFO): Bump Revision, to
+	account for bugfixes since the last release.
+	* libltdl/config/install-sh, libltdl/config/config.guess,
+	libltdl/config/config.sub, libltdl/config/texinfo.tex,
+	INSTALL: Updated from canonical source.
+	* NEWS: Update with missing entries from ChangeLog.
+	* HACKING: Note workaround for developer tool-path leakage bug.
+
+	Skip some tests in --disable-ltdl-install mode.
+	* tests/dlloader-api.at, tests/exceptions.at,
+	tests/lalib-syntax.at, tests/loadlibrary.at,
+	tests/lt_dlopenext.at, tests/resident.at: Detect when these
+	tests try to link against the not installed libltdl.la, and
+	skip rather than FAIL.
+
+2010-05-05  Peter Rosin  <peda@lysator.liu.se>
+
+	Clarify versioning algorithm documentation.
+	* doc/libtool.texi (Updating version info): Be explicit
+	about setting age to zero on interface change.
+	Reported by Jef Driesen <jefdriesen@hotmail.com>
+
+2010-05-04  Peter O'Gorman  <peter@pogma.com>
+
+	Ranlib is required with -force_load and fat archives.
+	* libltdl/m4/libtool.m4 (_LT_REQUIRED_DARWIN_CHECKS): Run
+	ranlib.
+	Reported by Jeremy Huddleston <jeremyhu@apple.com>
+
+2010-04-09  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix incompatible struct declarations.
+	* doc/libtool.texi (Dlpreopening): Remove broken documentation
+	of lt_dlsymbol and lt_dlsymlist.  Document typedef lt_dlsymlist
+	and symbol lt_preloaded_symbols according to the implementation.
+	* tests/demo/dlmain.c (lt_symlist): Make struct anonymous ...
+	(lt_dlsymlist): ... and typedef to this name.
+	(lt_preloaded_symbols, main): Adjust.
+	* tests/pdemo/longer_file_name_dlmain.c: Likewise.
+
+2010-04-04  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Use linker_flags not compiler_flags with $LD.
+	* libltdl/m4/libtool.m4 (_LT_LINKER_SHLIBS) [linux]
+	<archive_cmds, archive_expsym_cmds>: With xlf and bgxlf
+	compilers, when linking with $LD, use $linker_flags not
+	$compiler_flags.
+
+2010-03-31  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Add FAQ, and FAQ entry for flags stripped at library link time.
+	* doc/libtool.texi (FAQ, Stripped link flags): New nodes.
+	(Wrapper executables): Replace bug address with macro.
+	(Compile mode, Link mode): Document `-Wc,' and `-Xcompiler '
+	semantics better.
+	* libltdl/config/ltmain.m4sh (func_mode_link): Rewrite comment
+	for the flags that are passed through.
+	Prompted by reports from Simon Richter <Simon.Richter@hogyros.de>,
+	Török Edwin <edwintorok@gmail.com> and
+	Ã…ke Sandgren <ake.sandgren@hpc2n.umu.se>.
+
+2010-03-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Fix preloader symbol list declaration in libltdl.
+	* libltdl/ltdl.c (preloaded_symbols): Fix declaration to include
+	array brackets.
+	(lt_dlinit): Do not take address of preloaded_symbols.
+
+	Fix typo in libtool --help output.
+	* libltdl/config/ltmain.m4sh (func_mode_help): Fix typo in help
+	output.
+
+	Fix a couple of documentation errors.
+	* doc/libtool.texi (Autoconf macros): Improve hyphenation.
+	(Using libltdl): libltdl uses the Lesser General Public License,
+	not the Library General Public License.
+
+	Do not use @sc nor @acronym in the manual.
+	* doc/libtool.texi: Remove all usage of @sc.
+
+2010-03-19  Chris Demetriou  <cgd@google.com>
+
+	Sort output of 'find' to enable deterministic builds.
+	* libltdl/config/ltmain.m4sh (func_extract_archives): Sort
+	output of 'find'.
+	* libltdl/m4/libtool.m4 (_LT_LANG_CXX_CONFIG): Likewise.
+	* THANKS: Update.
+
+2010-03-19  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Unconditionally normalize LC_ALL, LANGUAGE in libtool script.
+	* libltdl/config/ltmain.m4sh: Unconditionally set LC_ALL and
+	LANGUAGE to 'C', to avoid semantic differences on MinGW under
+	Chines locale.  SCO issues with e.g. LANG=C are not known to
+	be relevant today any more.
+	Report by Pete Batard <pbatard@gmail.com> and Xiaofan Chen
+	<xiaofanc@gmail.com>.
+
+2010-03-17  Peter Rosin  <peda@lysator.liu.se>
+
+	Preserve the last error when restoring the error mode.
+	* libltdl/loaders/loadlibrary.c (wm_open): Don't rely on
+	SetThreadErrorMode (or SetErrorMode) to not clobber the last
+	error.
+	Report by Ralf Wildenhues.
+
+	Use Get/SetThreadErrorMode if they are available.
+	* libltdl/loaders/loadlibrary.c (wrap_geterrormode): Replaced...
+	(wrap_getthreaderrormode): ...by this function that checks
+	first for GetThreadErrorMode, then GetErrorMode and makes use
+	of either of those or...
+	(fallback_getthreaderrormode): ...else falls back to this
+	replacement function that implements the old workaround, which
+	was previously implemented in...
+	(fallback_geterrormode): ...this now renamed function.
+	(geterrormode): Replaced...
+	(getthreaderrormode): ...by this function pointer that points
+	at either of wrap_getthreaderrormode, GetThreadErrorMode,
+	GetErrorMode or fallback_getthreaderrormode.
+	(wrap_setthreaderrormode): New function that checks if
+	SetThreadErrorMode is supported by the system and makes use of
+	it if it is.
+	(fallback_setthreaderrormode): New function that is used
+	otherwise that implements the old version using SetErrorMode.
+	(setthreaderrormode): New function pointer that points at
+	either of wrap_setthreaderrormode, SetThreadErrorMode or
+	fallback_setthreaderrormode.
+	(vm_open): Adjust to the above.
+
+2010-02-28  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Detect Sun compiler suite with 'sun'-prefixed names.
+	* libltdl/m4/libtool.m4 (_LT_COMPILER_PIC, _LT_LANG_CXX_CONFIG)
+	(_LT_SYS_HIDDEN_LIBDEPS) [solaris]: Accept compiler names sunCC,
+	sunf77, sunf90, sunf95 in addition to CC, f77, f90, f95.
+	* NEWS: Update.
+	Report by Vadim Zeitlin.
+
+2010-02-28  Pierre Ossman  <ossman@ossman.lkpg.cendio.se>  (tiny change)
+	    Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+	Fix deplibs check fallback for 64-bit Windows and Windows CE.
+	* libltdl/m4/libtool.m4 (_LT_CHECK_MAGIC_METHOD): Accept file formats
+	'pe-arm-wince' and 'pe-x86-64'.  Add note about consistency with ...
+	* libltdl/config/ltmain.m4sh (func_win32_libid): ... the respective
+	pattern here; sync pattern from the former.
+	* tests/deplibs-mingw.at (deplibs without file command): New
+	file, new test.
+	* Makefile.am (TESTSUITE_AT): Update.
+	* NEWS: Update.
+
+2010-02-24  Scott McCreary  <scottmc2@gmail.com>  (tiny change)
+
+	Update search path on Haiku for legacy system directory.
+	* libltdl/m4/libtool.m4 (_LT_SYS_DYNAMIC_LINKER) [haiku]
+	<sys_lib_dlsearch_path_spec>: Replace legacy
+	/boot/beos/system/lib directory with /boot/system/lib.
+	* THANKS: Update.
+
+2010-02-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	manual: fix detailmenu ordering.
+	* doc/libtool.texi (Top): Add section for `Linking executables'
+	in the detailmenu.
+
+2010-02-21  Charles Wilson <libtool@cwilson.fastmail.fm>
+
+	Guard against strerror()==NULL
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src:main):
+	Check return value of strerror() using nonnull().
+	(func_emit_cwrapperexe_src:find_executable): Ditto.
+	(func_emit_cwrapperexe_src:chase_symlinks): Ditto.
+
+2010-02-21  Charles Wilson <libtool@cwilson.fastmail.fm>
+
+	Document wrapper changes.
+	* NEWS: Indicate new feature and incompatibility.
+	* doc/libtool.texi [detailmenu]: Add reference to subsection
+	'Wrapper executables for programs', in Platform Quirks category.
+	[Linking executables]: Mention wrapper executables, in
+	addition to wrapper scripts. Add menu referencing subsection
+	'Wrapper executables for programs'.
+	[Wrapper executables for programs]: New subsection. Documents
+	cwrapper rationale and command line options.
+
+2010-02-21  Charles Wilson <libtool@cwilson.fastmail.fm>
+
+	Add --lt-* options to shell wrapper
+	* libltdl/config/ltmain.m4sh (func_emit_wrapper): Call
+	func_parse_lt_options early. Use func_exec_program.
+	(func_emit_wrapper:func_parse_lt_options): New function.
+	(func_emit_wrapper:func_lt_dump_args): New function.
+	(func_emit_wrapper:func_exec_program_core): New function.
+	(func_emit_wrapper:func_exec_program): New function.
+
+2010-02-21  Charles Wilson <libtool@cwilson.fastmail.fm>
+
+	Enable runtime cwrapper debugging; add tests
+	* libltdl/config/ltmain.m4sh (func_emit_cwrapperexe_src):
+	Update comments. Initialize program_name. Eliminate _LENGTH
+	variables for string constants. In debug mode, print a
+	banner with known content before any other output. Remove
+	LTWRAPPER_DEBUGPRINTF macro. Add constants and variables
+	to support new --lt-debug option.
+	(func_emit_cwrapperexe_src:ltwrapper_debugprintf): Renamed to...
+	(func_emit_cwrapperexe_src:lt_debugprintf): this. Only print
+	messages if lt_debug != 0. Ensure appearance of messages
+	conforms to GCS.
+	(func_emit_cwrapperexe_src:lt_fatal): Ditto.
+	(func_emit_cwrapperexe_src:lt_error_core): Ditto.
+	(func_emit_cwrapperexe_src): Update all callers to lt_fatal.
+	Update all users of LTWRAPPER_DEBUGPRINTF (()) to call
+	lt_debugprintf () directly.
+	(func_emit_cwrapperexe_src:main): Consolidate option parsing.
+	Ensure first use of lt_debugprintf occurs after option parsing.
+	Add stanza to parse for --lt-debug and set lt_debug variable.
+	Use strcmp rather than strncmp, where safe.
+	* tests/cwrapper.at: Add new tests for --lt-debug and
+	-DLT_DEBUGWRAPPER.
+
+2010-01-31  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Use --email with gendocs.sh.
+	* Makefile.maint (web-manual): Pass bug reporting address to
+	gendocs.sh.
+
+	Make testsuite code C++ clean again.
+	* tests/resident.at (resident modules): Fix for C++.
+
+2010-01-29  Peter Rosin  <peda@lysator.liu.se>
+	    Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Testsuite exposure for dlloader API.
+	* tests/dlloader-api.at: New file, new test.
+	* Makefile.am (TESTSUITE_AT): Update.
+
+2010-01-29  Peter Rosin  <peda@lysator.liu.se>
+
+	* tests/loadlibrary.at: Fix C++ issues.
+
+2010-01-20  Peter Rosin  <peda@lysator.liu.se>
+
+	Report proper errors from the loadlibrary loader.
+	* libltdl/loaders/loadlibrary.c (loadlibraryerror): New
+	helper function that returns the latest Windows error as a
+	string, or the provided default string on failure to do so.
+	(LOADLIB_SETERROR): New macro that wraps previous to make it
+	easy to use.
+	(vm_open, vm_close, vm_sym): Make use of previous.
+	(LOCALFREE): New macro to help free the Windows error string.
+	(vl_exit): Make use of previous.
+	* tests/loadlibarry.at: New file, new test that makes sure
+	the loadlibrary loader reports non-standard error messages.
+	* Makefile.am (TESTSUITE_AT): Add above test.
+
+2010-01-02  Peter Rosin  <peda@lysator.liu.se>
+
+	Use GetErrorMode if it is available.
+	* libltdl/loaders/loadlibrary.c (wrap_geterrormode): New
+	function that checks if GetErrorMode is supported by the
+	system and makes use of it if it is.
+	(fallback_geterrormode): New function that is used otherwise
+	that implements the old workaround.
+	(geterrormode): New function pointer that points at either
+	of the above or directly at GetErrorMode.
+	(vm_open): Make use of the above.
+
+2010-01-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Ensure functions from resident modules work in atexit handlers.
+	* tests/resident.at (resident modules): New file, new test.
+	* Makefile.am (TESTSUITE_AT): Adjust.
+	Report by Bob Friesenhahn.
+
+	Testsuite exposure for relative output file names and deplibs.
+	* tests/deplib-in-subdir.at (deplib in subdir): New file, new
+	test.
+	* Makefile.am (TESTSUITE_AT): Update.
+	Prompted by report from Bob Friesenhahn.
+
+2010-01-11  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+	    Bob Friesenhahn  <bfriesen@simple.dallas.tx.us>
+
+	Testsuite exposure for C++ exception handling.
+	* tests/exceptions.at (C++ exception handling): New file, new
+	test.
+	* Makefile.am (TESTSUITE_AT): Update.
+	Report by Bob Friesenhahn.
+
+2010-01-06  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
+
+	Bump copyright years.
+	* ChangeLog.2009: New, rotated from ...
+	* ChangeLog: ... here.
+	* Makefile.am (EXTRA_DIST): Add ChangeLog.2009.
+	* NEWS, libltdl/config/ltmain.m4sh: Bump copyright years.
+	* libltdl/m4/libtool.m4 (_LT_COPYING, LT_OUTPUT): Likewise.
+	* libtoolize.m4sh: Likewise.
+
+Continued in ChangeLog.2009
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
+
+vim:tw=72
diff --git a/INSTALL b/INSTALL
new file mode 100644
index 0000000..a1e89e1
--- /dev/null
+++ b/INSTALL
@@ -0,0 +1,370 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
+
+   Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+   Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package.  The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package.  Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below.  The lack of an optional feature in a given package is not
+necessarily a bug.  More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+   The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.
+
+     Running `configure' might take a while.  While running, it prints
+     some messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package, generally using the just-built uninstalled binaries.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the `make install' phase executed with root
+     privileges.
+
+  5. Optionally, type `make installcheck' to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior `make install' required
+     root privileges, verifies that the installation completed
+     correctly.
+
+  6. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+  7. Often, you can also type `make uninstall' to remove the installed
+     files again.  In practice, not all packages have tested that
+     uninstallation works correctly, even though it is required by the
+     GNU Coding Standards.
+
+  8. Some packages, particularly those that use Automake, provide `make
+     distcheck', which can by used by developers to test that all other
+     targets like `make install' and `make uninstall' work correctly.
+     This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you can use GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.  This
+is known as a "VPATH" build.
+
+   With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory.  After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+   On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor.  Like
+this:
+
+     ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+                 CPP="gcc -E" CXXCPP="g++ -E"
+
+   This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+   By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.  In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'.  Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated.  The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the `DESTDIR' variable.  For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names.  The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+   Some packages offer the ability to configure how verbose the
+execution of `make' will be.  For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+   On HP-UX, the default C compiler is not ANSI C compatible.  If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+     ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+   HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved.  Use GNU `make'
+instead.
+
+   On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file.  The option `-nodtk' can be used as
+a workaround.  If GNU CC is not installed, it is therefore recommended
+to try
+
+     ./configure CC="cc"
+
+and if that doesn't work, try
+
+     ./configure CC="cc -nodtk"
+
+   On Solaris, don't put `/usr/ucb' early in your `PATH'.  This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'.  So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+   On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'.  It is recommended to use the following options:
+
+     ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on.  Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS
+     KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug.  Until the bug is fixed you can use this workaround:
+
+     CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+     Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+     Print a summary of the options unique to this package's
+     `configure', and exit.  The `short' variant lists options used
+     only in the top level, while the `recursive' variant lists options
+     also present in any nested packages.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+     Use DIR as the installation prefix.  *note Installation Names::
+     for more details, including other options available for fine-tuning
+     the installation locations.
+
+`--no-create'
+`-n'
+     Run the configure checks, but stop before creating any output
+     files.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+
diff --git a/Makefile.am b/Makefile.am
new file mode 100644
index 0000000..268b399
--- /dev/null
+++ b/Makefile.am
@@ -0,0 +1,943 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
+##   Free Software Foundation, Inc.
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+ACLOCAL_AMFLAGS  	= -I libltdl/m4
+
+AM_CPPFLAGS		=
+AM_LDFLAGS		=
+
+DIST_SUBDIRS		= .
+EXTRA_DIST		=
+
+BUILT_SOURCES		= libtool libtoolize
+
+CLEANFILES		=
+MOSTLYCLEANFILES	=
+DISTCLEANFILES		=
+MAINTAINERCLEANFILES	=
+
+include_HEADERS		=
+noinst_LTLIBRARIES	=
+lib_LTLIBRARIES		=
+EXTRA_LTLIBRARIES	=
+
+auxdir			= libltdl/config
+m4dir			= libltdl/m4
+
+# Using `cd' in backquotes may print the directory name, use this instead:
+lt__cd		= CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+
+MKSTAMP = $(SHELL) $(srcdir)/$(auxdir)/mkstamp
+
+timestamp = set dummy `$(MKSTAMP) $(srcdir)`; shift; \
+	case $(VERSION) in \
+	  *[acegikmoqsuwy]) TIMESTAMP=" $$1 $$2" ;; \
+	  *) TIMESTAMP="" ;; \
+	esac
+
+rebuild = rebuild=:; $(timestamp); correctver=$$1
+
+
+# ---------- #
+# Bootstrap. #
+# ---------- #
+
+sh_files	= $(auxdir)/general.m4sh $(auxdir)/getopt.m4sh
+EXTRA_DIST     += bootstrap $(srcdir)/libtoolize.in $(auxdir)/ltmain.m4sh \
+		  $(auxdir)/mkstamp $(sh_files) \
+		  ChangeLog.1996 ChangeLog.1997 ChangeLog.1998 \
+		  ChangeLog.1999 ChangeLog.2000 ChangeLog.2001 \
+		  ChangeLog.2002 ChangeLog.2003 ChangeLog.2004 \
+		  ChangeLog.2005 ChangeLog.2006 ChangeLog.2007 \
+		  ChangeLog.2008 ChangeLog.2009 ChangeLog.2010
+CLEANFILES     += libtool libtoolize libtoolize.tmp \
+		  $(auxdir)/ltmain.tmp $(m4dir)/ltversion.tmp
+
+## These are the replacements that need to be made at bootstrap time,
+## because they must be static in distributed files, and not accidentally
+## changed by configure running on the build machine.
+bootstrap_edit  = sed \
+		  -e 's,@MACRO_VERSION\@,$(VERSION),g' \
+		  -e "s,@MACRO_REVISION\@,$$correctver,g" \
+		  -e "s,@MACRO_SERIAL\@,$$serial,g" \
+		  -e 's,@PACKAGE\@,$(PACKAGE),g' \
+		  -e 's,@PACKAGE_BUGREPORT\@,$(PACKAGE_BUGREPORT),g' \
+		  -e 's,@PACKAGE_URL\@,$(PACKAGE_URL),g' \
+		  -e 's,@PACKAGE_NAME\@,$(PACKAGE_NAME),g' \
+		  -e "s,@package_revision\@,$$correctver,g" \
+		  -e 's,@PACKAGE_STRING\@,$(PACKAGE_NAME) $(VERSION),g' \
+		  -e 's,@PACKAGE_TARNAME\@,$(PACKAGE),g' \
+		  -e 's,@PACKAGE_VERSION\@,$(VERSION),g' \
+		  -e "s,@TIMESTAMP\@,$$TIMESTAMP,g" \
+		  -e 's,@VERSION\@,$(VERSION),g'
+
+## We build ltversion.m4 here, instead of from config.status,
+## because config.status is rerun each time one of configure's
+## dependencies change and ltversion.m4 happens to be a configure
+## dependency.  configure and ltversion.m4 would be rebuilt in
+## a loop otherwise.
+## We used to do this with a 'stamp-vcl' file, but non-gmake builds
+## would rerun configure on every invocation, so now we manually
+## check the version numbers from the build rule when necessary.
+## Use `$(srcdir)/m4' for the benefit of non-GNU makes: this is
+## how ltversion.m4 appears in our dependencies.
+EXTRA_DIST += $(m4dir)/ltversion.in $(srcdir)/$(m4dir)/ltversion.m4
+$(srcdir)/$(m4dir)/ltversion.m4: $(m4dir)/ltversion.in configure.ac ChangeLog
+	@target='$(srcdir)/$(m4dir)/ltversion.m4'; $(rebuild); \
+	if test -f "$$target"; then \
+	  set dummy `sed -n '/^# serial /p' "$$target"`; shift; \
+	  actualver=1.$$3; \
+	  test "$$actualver" = "$$correctver" && rebuild=false; \
+	fi; \
+	for prereq in $?; do \
+	  case $$prereq in *ChangeLog | *configure.ac);; *) rebuild=:;; esac; \
+	done; \
+	if $$rebuild; then \
+	  cd $(srcdir); \
+	  rm -f $(m4dir)/ltversion.tmp; \
+	  serial=`echo "$$correctver" | sed 's,^1[.],,g'`; \
+	  echo $(bootstrap_edit) \
+	    $(srcdir)/$(m4dir)/ltversion.in \> $(srcdir)/$(m4dir)/ltversion.m4; \
+	  $(bootstrap_edit) \
+		  $(m4dir)/ltversion.in > $(m4dir)/ltversion.tmp; \
+	  chmod a-w $(m4dir)/ltversion.tmp; \
+	  mv -f $(m4dir)/ltversion.tmp $(m4dir)/ltversion.m4; \
+	fi
+
+## And for similar reasons, ltmain.sh can't be built from config.status.
+## We used to do this with a 'stamp-vcl' file, but non-gmake builds
+## would rerun configure on every invocation, so now we manually
+## check the version numbers from the build rule when necessary.
+## !WARNING! If you edit this rule to change the contents of ltmain.sh,
+##           you must `touch $(srcdir)/$(auxdir)/ltmain.in' from the
+##           shell if you need ltmain.sh to be regenerated.  Ideally, we
+##           should make this rule depend on Makefile but that will break
+##           distcheck (at least) by rebuilding ltmain.sh in the source
+##           tree whenever config.status regenerates the Makefile.
+EXTRA_DIST += $(srcdir)/$(auxdir)/ltmain.sh
+$(srcdir)/$(auxdir)/ltmain.sh: $(sh_files) $(auxdir)/ltmain.m4sh configure.ac ChangeLog
+	@target='$(srcdir)/$(auxdir)/ltmain.sh'; $(rebuild); \
+	if test -f "$$target"; then \
+	  eval `sed -n '/^package_revision=/p' "$$target"`; \
+	  actualver=$$package_revision; \
+	  test "$$actualver" = "$$correctver" && rebuild=false; \
+	fi; \
+	for prereq in $?; do \
+	  case $$prereq in *ChangeLog);; *) rebuild=:;; esac; \
+	done; \
+	if $$rebuild; then \
+	  cd $(srcdir); \
+	  rm -f $(auxdir)/ltmain.in $(auxdir)/ltmain.tmp \
+	    $(auxdir)/ltmain.sh; \
+	  echo $(M4SH) -B $(auxdir) $(auxdir)/ltmain.m4sh \
+	    \> $(auxdir)/ltmain.in; \
+	  $(M4SH) -B $(auxdir) $(auxdir)/ltmain.m4sh \
+	    > $(auxdir)/ltmain.in; \
+	  echo $(bootstrap_edit) \
+	    $(srcdir)/$(auxdir)/ltmain.in "> $$target"; \
+	  $(bootstrap_edit) -e '/^: \$${.*="@.*@"}$$/d' \
+	    $(auxdir)/ltmain.in > $(auxdir)/ltmain.tmp; \
+	  rm -f $(auxdir)/ltmain.in; \
+	  chmod a-w $(auxdir)/ltmain.tmp; \
+	  mv -f $(auxdir)/ltmain.tmp $(auxdir)/ltmain.sh; \
+	fi
+
+# Use `$(srcdir)' for the benefit of non-GNU makes: this is
+# how libtoolize.in appears in our dependencies.
+EXTRA_DIST += libtoolize.m4sh
+$(srcdir)/libtoolize.in: $(sh_files) libtoolize.m4sh Makefile.am
+	cd $(srcdir); \
+	rm -f libtoolize.in libtoolize.tmp; \
+	$(M4SH) -B $(auxdir) libtoolize.m4sh > libtoolize.tmp; \
+	$(bootstrap_edit) libtoolize.tmp > libtoolize.in; \
+	rm -f libtoolize.tmp
+
+$(srcdir)/libltdl/Makefile.am: $(srcdir)/libltdl/Makefile.inc
+	cd $(srcdir); \
+	in=libltdl/Makefile.inc; out=libltdl/Makefile.am; \
+	rm -f $$out; \
+	( $(SED) -n '1,/^.. DO NOT REMOVE THIS LINE -- /p' $$in; \
+	{ echo 'ACLOCAL_AMFLAGS = -I m4'; \
+	  echo 'AUTOMAKE_OPTIONS = foreign'; \
+	  echo 'AM_CPPFLAGS ='; \
+	  echo 'AM_LDFLAGS ='; \
+	  echo 'BUILT_SOURCES ='; \
+	  echo 'include_HEADERS ='; \
+	  echo 'noinst_LTLIBRARIES ='; \
+	  echo 'lib_LTLIBRARIES ='; \
+	  echo 'EXTRA_LTLIBRARIES ='; \
+	  echo 'EXTRA_DIST ='; \
+	  echo 'CLEANFILES ='; \
+	  echo 'MOSTLYCLEANFILES ='; \
+	}; \
+	$(SED) -n '/^.. DO NOT REMOVE THIS LINE -- /,$$p' $$in | \
+	$(SED) -e 's,libltdl_,,; s,libltdl/,,; s,: libltdl/,: ,' \
+	       -e 's,\$$(libltdl_,$$(,' \
+	) | \
+	$(SED) -e '/^.. DO NOT REMOVE THIS LINE -- /d' \
+	       -e '1s,^\(.. Makefile.\)inc.*,\1am -- Process this file with automake to produce Makefile.in,' > $$out;
+	chmod a-w $(srcdir)/libltdl/Makefile.am
+
+
+## Unfortunately, all this bogeyness means that we have to manually
+## keep the generated files in libltdl up to date.
+LTDL_BOOTSTRAP_DEPS = $(srcdir)/libltdl/aclocal.m4 \
+	$(srcdir)/libltdl/stamp-mk \
+	$(srcdir)/libltdl/configure \
+	$(srcdir)/libltdl/config-h.in
+
+all-local: $(LTDL_BOOTSTRAP_DEPS)
+
+
+## ---------------- ##
+## Libtool scripts. ##
+## ---------------- ##
+
+configure_edit = sed \
+	-e 's,@aclocal_DATA\@,$(aclocalfiles),g' \
+	-e 's,@aclocaldir\@,$(aclocaldir),g' \
+	-e 's,@datadir\@,$(datadir),g' \
+	-e 's,@EGREP\@,$(EGREP),g' \
+	-e 's,@FGREP\@,$(FGREP),g' \
+	-e 's,@GREP\@,$(GREP),g' \
+	-e 's,@host_triplet\@,$(host_triplet),g' \
+	-e 's,@LN_S\@,$(LN_S),g' \
+	-e "s,@pkgconfig_files\@,$(auxfiles),g" \
+	-e 's,@pkgdatadir\@,$(pkgdatadir),g' \
+	-e "s,@pkgltdl_files\@,$(ltdldatafiles),g" \
+	-e 's,@prefix\@,$(prefix),g' \
+	-e 's,@SED\@,$(SED),g'
+
+# The libtool distributor and the standalone libtool script.
+bin_SCRIPTS = libtoolize libtool
+
+libtoolize: $(srcdir)/libtoolize.in $(top_builddir)/config.status
+	rm -f libtoolize.tmp libtoolize
+	$(configure_edit) \
+		$(srcdir)/libtoolize.in > libtoolize.tmp
+	chmod a+x libtoolize.tmp
+	chmod a-w libtoolize.tmp
+	mv -f libtoolize.tmp libtoolize
+
+# We used to do this with a 'stamp-vcl' file, but non-gmake builds
+# would rerun configure on every invocation, so now we manually
+# check the version numbers from the build rule when necessary.
+libtool: $(top_builddir)/config.status $(srcdir)/$(auxdir)/ltmain.sh ChangeLog
+	@target=libtool; $(rebuild); \
+	if test -f "$$target"; then \
+	  set dummy `./$$target --version | sed 1q`; actualver="$$5"; \
+	  test "$$actualver" = "$$correctver" && rebuild=false; \
+	fi; \
+	for prereq in $?; do \
+	  case $$prereq in *ChangeLog);; *) rebuild=:;; esac; \
+	done; \
+	if $$rebuild; then \
+	  echo $(SHELL) ./config.status $$target; \
+	  cd $(top_builddir) && $(SHELL) ./config.status $$target; \
+	fi
+
+.PHONY: configure-subdirs
+configure-subdirs distdir: $(DIST_MAKEFILE_LIST)
+@DIST_MAKEFILE_LIST@:
+	dir=`echo $@ | sed 's,^[^/]*$$,.,;s,/[^/]*$$,,'`; \
+	test -d $$dir || mkdir $$dir || exit 1; \
+	abs_srcdir=`$(lt__cd) $(srcdir) && pwd`; \
+	(cd $$dir && $$abs_srcdir/$$dir/configure --with-dist) || exit 1
+
+
+## -------- ##
+## Libltdl. ##
+## -------- ##
+
+include libltdl/Makefile.inc
+
+EXTRA_DIST += $(srcdir)/libltdl/stamp-mk $(m4dir)/lt~obsolete.m4
+
+$(srcdir)/libltdl/Makefile.in: $(srcdir)/libltdl/Makefile.am \
+	    $(srcdir)/libltdl/aclocal.m4 
+	cd $(srcdir)/libltdl && $(AUTOMAKE) Makefile
+
+$(srcdir)/libltdl/stamp-mk: $(srcdir)/libltdl/Makefile.in
+	cd $(srcdir)/libltdl && \
+	sed -e 's,config/mdate-sh,,' -e 's,config/texinfo.tex,,' \
+	    -e 's,config/mkinstalldirs,,' \
+	    < Makefile.in > Makefile.inT && \
+	mv -f Makefile.inT Makefile.in
+	echo stamp > $@
+
+sub_aclocal_m4_deps = \
+	$(srcdir)/libltdl/configure.ac \
+	$(m4dir)/libtool.m4 \
+	$(m4dir)/ltoptions.m4 \
+	$(m4dir)/ltdl.m4 \
+	$(srcdir)/$(m4dir)/ltversion.m4 \
+	$(m4dir)/ltsugar.m4 \
+	$(m4dir)/argz.m4 \
+	$(m4dir)/lt~obsolete.m4
+
+sub_configure_deps = $(sub_aclocal_m4_deps) $(srcdir)/libltdl/aclocal.m4
+
+$(srcdir)/libltdl/aclocal.m4: $(sub_aclocal_m4_deps)
+	cd $(srcdir)/libltdl && $(ACLOCAL) -I m4
+
+$(srcdir)/libltdl/configure: $(sub_configure_deps)
+	cd $(srcdir)/libltdl && $(AUTOCONF)
+
+$(srcdir)/libltdl/config-h.in: $(sub_configure_deps)
+	cd $(srcdir)/libltdl && $(AUTOHEADER)
+	touch $@
+
+
+## -------------- ##
+## Documentation. ##
+## -------------- ##
+
+info_TEXINFOS		= doc/libtool.texi
+doc_libtool_TEXINFOS	= doc/PLATFORMS doc/fdl.texi doc/notes.texi
+EXTRA_DIST	       += $(srcdir)/doc/notes.txt
+## Workaround for a texinfo bug described here:
+## http://thread.gmane.org/gmane.comp.tex.texinfo.bugs/3930
+DISTCLEANFILES	       += libtool.dvi
+
+all-local: $(srcdir)/doc/notes.txt
+
+$(srcdir)/doc/notes.txt: $(srcdir)/doc/notes.texi
+	cd $(srcdir)/doc && \
+	  $(MAKEINFO) --no-headers $(MAKEINFOFLAGS) -o notes.txt notes.texi
+
+dist_man1_MANS		= $(srcdir)/doc/libtool.1 $(srcdir)/doc/libtoolize.1
+MAINTAINERCLEANFILES	+= $(dist_man1_MANS)
+update_mans = \
+  PATH=".$(PATH_SEPARATOR)$$PATH"; export PATH; \
+  $(HELP2MAN) --output=$@
+$(srcdir)/doc/libtool.1: $(srcdir)/$(auxdir)/ltmain.sh
+	$(update_mans) --help-option=--help-all libtool
+$(srcdir)/doc/libtoolize.1: $(srcdir)/libtoolize.in
+	$(update_mans) libtoolize
+
+
+## ------------- ##
+## Installation. ##
+## ------------- ##
+
+# These are required by libtoolize and must be executable when installed.
+# The timestamps on these files must be preserved carefully so we install,
+# uninstall and set executable with custom rules here.
+auxexefiles	= config/compile config/config.guess config/config.sub \
+		  config/depcomp config/install-sh config/missing
+auxfiles	= $(auxexefiles) config/ltmain.sh
+
+# Everything that gets picked up by aclocal is automatically distributed,
+# this is the list of macro files we install on the user's system.
+aclocalfiles	= m4/argz.m4 m4/libtool.m4 m4/ltdl.m4 m4/ltoptions.m4 \
+		  m4/ltsugar.m4 m4/ltversion.m4 m4/lt~obsolete.m4
+
+## These are installed as a subdirectory of pkgdatadir so that
+## libtoolize --ltdl can find them later:
+ltdldatafiles	= libltdl/COPYING.LIB \
+		  libltdl/README \
+		  libltdl/Makefile.inc \
+		  libltdl/Makefile.am \
+		  libltdl/configure.ac \
+		  libltdl/aclocal.m4 \
+		  libltdl/Makefile.in \
+		  libltdl/config-h.in \
+		  libltdl/configure \
+		  libltdl/argz_.h \
+		  libltdl/argz.c \
+		  libltdl/loaders/dld_link.c \
+		  libltdl/loaders/dlopen.c \
+		  libltdl/loaders/dyld.c \
+		  libltdl/loaders/load_add_on.c \
+		  libltdl/loaders/loadlibrary.c \
+		  libltdl/loaders/shl_load.c \
+		  libltdl/lt__dirent.c \
+		  libltdl/lt__strl.c \
+		  $(libltdl_libltdl_la_SOURCES)
+
+install-data-local: libltdl/Makefile.in
+	@$(NORMAL_INSTALL)
+## Don't install over the top of an old pkgdatadir
+	-rm -rf $(DESTDIR)$(pkgdatadir)/*
+## To avoid spurious reconfiguration when the user installs these files
+## with libtoolize, we have to install them in the correct order:
+## First, put a copy of the libtool m4 macros in the aclocal dir
+	$(mkinstalldirs) $(DESTDIR)$(aclocaldir)
+	@list='$(aclocalfiles)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's|^.*/||'`; \
+	  echo " $(INSTALL_DATA) '$(srcdir)/$(m4dir)/$$f' '$(DESTDIR)$(aclocaldir)/$$f'"; \
+	  $(INSTALL_DATA) "$(srcdir)/$(m4dir)/$$f" "$(DESTDIR)$(aclocaldir)/$$f"; \
+	done
+## install the helper scripts
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/config
+	@list='$(auxexefiles)' && for p in $$list; do \
+	  echo " $(INSTALL_SCRIPT) '$(srcdir)/libltdl/$$p' '$(DESTDIR)$(pkgdatadir)/$$p'"; \
+	  $(INSTALL_SCRIPT) "$(srcdir)/libltdl/$$p" "$(DESTDIR)$(pkgdatadir)/$$p"; \
+	done
+	$(INSTALL_DATA) "$(srcdir)/libltdl/config/ltmain.sh" "$(DESTDIR)$(pkgdatadir)/config/ltmain.sh" 
+## install the libltdl files
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/libltdl
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/libltdl/libltdl
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/libltdl/loaders
+	@list='$(ltdldatafiles)' && for p in $$list; do \
+	  echo " $(INSTALL_DATA) '$(srcdir)/$$p' '$(DESTDIR)$(pkgdatadir)/$$p'"; \
+	  $(INSTALL_DATA) "$(srcdir)/$$p" "$(DESTDIR)$(pkgdatadir)/$$p"; \
+	done
+	-chmod a+x $(DESTDIR)$(pkgdatadir)/libltdl/configure
+
+
+## ------------- ##
+## Distribution. ##
+## ------------- ##
+
+edit_readme_alpha = $(auxdir)/edit-readme-alpha
+
+EXTRA_DIST += $(edit_readme_alpha)
+
+uninstall-hook:
+	@$(NORMAL_UNINSTALL)
+	@list='$(ltdldatafiles) $(auxfiles)'; for f in $$list; do \
+	  echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
+	done
+	@for p in $(aclocalfiles); do \
+	  f=`echo "$$p" | sed 's|^.*/||'`; \
+	  echo " rm -f '$(DESTDIR)$(aclocaldir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(aclocaldir)/$$f"; \
+	done
+
+dist-hook:
+## Edit the README file for alpha releases.
+	case $(VERSION) in \
+	  *[a-z]) $(SHELL) $(srcdir)/$(edit_readme_alpha) $(distdir)/README ;; \
+	esac
+## Ensure aclocal has not wrongly picked up old macro definitions.
+	for macro in LT_INIT AC_PROG_LIBTOOL AM_PROG_LIBTOOL; do \
+	  if grep $$macro $(srcdir)/aclocal.m4 $(srcdir)/libltdl/aclocal.m4; then \
+	    echo "Bogus $$macro macro contents in an aclocal.m4 file." >&2; \
+	    exit 1; \
+	  else :; fi; \
+	done
+
+
+## ----------- ##
+## Test suite. ##
+## ----------- ##
+
+# The testsuite files are evaluated in the order given here.
+TESTSUITE	= tests/testsuite
+TESTSUITE_AT	= tests/testsuite.at \
+		  tests/getopt-m4sh.at \
+		  tests/libtoolize.at \
+		  tests/help.at \
+		  tests/duplicate_members.at \
+		  tests/duplicate_conv.at \
+		  tests/duplicate_deps.at \
+		  tests/flags.at \
+		  tests/inherited_flags.at \
+		  tests/convenience.at \
+		  tests/link-order.at \
+		  tests/link-order2.at \
+		  tests/fail.at \
+		  tests/shlibpath.at \
+		  tests/runpath-in-lalib.at \
+		  tests/static.at \
+		  tests/export.at \
+		  tests/search-path.at \
+		  tests/indirect_deps.at \
+		  tests/archive-in-archive.at \
+		  tests/exeext.at \
+		  tests/execute-mode.at \
+		  tests/bindir.at \
+		  tests/cwrapper.at \
+		  tests/deplib-in-subdir.at \
+		  tests/infer-tag.at \
+		  tests/localization.at \
+		  tests/nocase.at \
+		  tests/install.at \
+		  tests/versioning.at \
+		  tests/destdir.at \
+		  tests/old-m4-iface.at \
+		  tests/am-subdir.at \
+		  tests/lt_dlexit.at \
+		  tests/lt_dladvise.at \
+		  tests/lt_dlopen.at \
+		  tests/lt_dlopen_a.at \
+		  tests/lt_dlopenext.at \
+		  tests/ltdl-libdir.at \
+		  tests/ltdl-api.at \
+		  tests/dlloader-api.at \
+		  tests/loadlibrary.at \
+		  tests/lalib-syntax.at \
+		  tests/resident.at \
+		  tests/slist.at \
+		  tests/need_lib_prefix.at \
+		  tests/standalone.at \
+		  tests/subproject.at \
+		  tests/nonrecursive.at \
+		  tests/recursive.at \
+		  tests/template.at \
+		  tests/ctor.at \
+		  tests/exceptions.at \
+		  tests/early-libtool.at \
+		  tests/with-pic.at \
+		  tests/no-executables.at \
+		  tests/deplibs-ident.at \
+		  tests/configure-iface.at \
+		  tests/stresstest.at \
+		  tests/cmdline_wrap.at \
+		  tests/pic_flag.at \
+		  tests/darwin.at \
+		  tests/dumpbin-symbols.at \
+		  tests/deplibs-mingw.at \
+		  tests/sysroot.at
+
+EXTRA_DIST     += $(srcdir)/$(TESTSUITE) $(TESTSUITE_AT) $(srcdir)/tests/package.m4
+
+# Be sure to reexport important environment variables:
+TESTS_ENVIRONMENT = MAKE="$(MAKE)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
+	CPP="$(CPP)" CPPFLAGS="$(CPPFLAGS)" LD="$(LD)" LDFLAGS="$(LDFLAGS)" \
+	LIBS="$(LIBS)" LN_S="$(LN_S)" NM="$(NM)" RANLIB="$(RANLIB)" \
+	AR="$(AR)" \
+	M4SH="$(M4SH)" SED="$(SED)" STRIP="$(STRIP)" lt_INSTALL="$(INSTALL)" \
+	MANIFEST_TOOL="$(MANIFEST_TOOL)" \
+	OBJEXT="$(OBJEXT)" EXEEXT="$(EXEEXT)" \
+	SHELL="$(SHELL)" CONFIG_SHELL="$(SHELL)" \
+	CXX="$(CXX)" CXXFLAGS="$(CXXFLAGS)" CXXCPP="$(CXXCPP)" \
+	F77="$(F77)" FFLAGS="$(FFLAGS)" \
+	FC="$(FC)" FCFLAGS="$(FCFLAGS)" \
+	GCJ="$(GCJ)" GCJFLAGS="$(GCJFLAGS)" \
+	lt_cv_to_host_file_cmd="$(to_host_file_cmd)" \
+	lt_cv_to_tool_file_cmd="$(to_tool_file_cmd)"
+
+BUILDCHECK_ENVIRONMENT = _lt_pkgdatadir="$(abs_top_srcdir)" \
+	LIBTOOLIZE="$(abs_top_builddir)/libtoolize" \
+	LIBTOOL="$(abs_top_builddir)/libtool" \
+	tst_aclocaldir="$(abs_top_srcdir)/libltdl/m4"
+
+INSTALLCHECK_ENVIRONMENT = \
+	LIBTOOLIZE="$(bindir)/`echo libtoolize | sed '$(program_transform_name)'`" \
+	LIBTOOL="$(bindir)/`echo libtool | sed '$(program_transform_name)'`" \
+	LTDLINCL="-I$(includedir)" \
+	LIBLTDL="$(libdir)/libltdl.la" \
+	tst_aclocaldir="$(aclocaldir)"
+
+# Use `$(srcdir)' for the benefit of non-GNU makes: this is
+# how `testsuite' appears in our dependencies.
+$(srcdir)/$(TESTSUITE): $(srcdir)/tests/package.m4 $(TESTSUITE_AT) Makefile.am
+	cd $(srcdir)/tests && \
+	$(AUTOTEST) `echo $(TESTSUITE_AT) | sed 's,tests/,,g'` -o testsuite.tmp && \
+	mv -f testsuite.tmp testsuite
+
+$(srcdir)/tests/package.m4: $(srcdir)/configure.ac Makefile.am
+	{ \
+	  echo '# Signature of the current package.'; \
+	  echo 'm4_define([AT_PACKAGE_NAME],      [@PACKAGE_NAME@])'; \
+	  echo 'm4_define([AT_PACKAGE_TARNAME],   [@PACKAGE_TARNAME@])'; \
+	  echo 'm4_define([AT_PACKAGE_VERSION],   [@PACKAGE_VERSION@])'; \
+	  echo 'm4_define([AT_PACKAGE_STRING],    [@PACKAGE_STRING@])'; \
+	  echo 'm4_define([AT_PACKAGE_BUGREPORT], [@PACKAGE_BUGREPORT@])'; \
+	  echo 'm4_define([AT_PACKAGE_URL],       [@PACKAGE_URL@])'; \
+	} | $(bootstrap_edit) > $(srcdir)/tests/package.m4
+
+tests/atconfig: $(top_builddir)/config.status
+	$(SHELL) ./config.status tests/atconfig
+
+DISTCLEANFILES += tests/atconfig
+
+CD_TESTDIR	= abs_srcdir=`$(lt__cd) $(srcdir) && pwd`; cd tests
+
+testsuite_deps = tests/atconfig $(srcdir)/$(TESTSUITE)
+testsuite_deps_uninstalled = $(testsuite_deps) libltdl/libltdlc.la \
+			     $(bin_SCRIPTS) $(LTDL_BOOTSTRAP_DEPS)
+
+# Hook the test suite into the check rule
+check-local: $(testsuite_deps_uninstalled)
+	$(CD_TESTDIR); \
+	CONFIG_SHELL="$(SHELL)" $(SHELL) $$abs_srcdir/$(TESTSUITE) \
+	  $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) $(TESTSUITEFLAGS)
+
+# Run the test suite on the *installed* tree.
+installcheck-local: $(testsuite_deps)
+	$(CD_TESTDIR); \
+	CONFIG_SHELL="$(SHELL)" $(SHELL) $$abs_srcdir/$(TESTSUITE) \
+	  $(TESTS_ENVIRONMENT) $(INSTALLCHECK_ENVIRONMENT) $(TESTSUITEFLAGS) \
+	  AUTOTEST_PATH="$(exec_prefix)/bin"
+
+check-noninteractive-old:
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS TESTS='$(NONINTERACTIVE_TESTS)'
+check-interactive-old:
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS TESTS='$(INTERACTIVE_TESTS)'
+
+# Run only noninteractive parts of the new testsuite.
+check-noninteractive-new: $(testsuite_deps_uninstalled)
+	$(CD_TESTDIR); \
+	CONFIG_SHELL="$(SHELL)" $(SHELL) $$abs_srcdir/$(TESTSUITE) \
+	  $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) \
+	  -k !interactive INNER_TESTSUITEFLAGS=",!interactive" \
+	  $(TESTSUITEFLAGS)
+
+# Run only interactive parts of the new testsuite.
+check-interactive-new: $(testsuite_deps_uninstalled)
+	$(CD_TESTDIR); \
+	CONFIG_SHELL="$(SHELL)" $(SHELL) $$abs_srcdir/$(TESTSUITE) \
+	  $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) \
+	  -k interactive -k recursive INNER_TESTSUITEFLAGS=",interactive" \
+	  $(TESTSUITEFLAGS)
+
+check-interactive: check-interactive-old check-interactive-new
+check-noninteractive: check-noninteractive-old check-noninteractive-new
+
+# We need to remove any file droppings left behind by testsuite
+clean-local: clean-local-legacy
+	-$(CD_TESTDIR); \
+	test -f $$abs_srcdir/$(TESTSUITE) && \
+	    $(SHELL) $$abs_srcdir/$(TESTSUITE) --clean
+
+
+## ------------- ##
+## Legacy tests. ##
+## ------------- ##
+
+# !WARNING! Don't add any new tests here, we are migrating to an
+#           Autotest driven framework, please add new test cases
+#           using the new framework above.  When the migration is
+#           complete this section should be removed.
+
+CXX_TESTS = \
+	tests/tagdemo-static.test \
+	tests/tagdemo-static-make.test \
+	tests/tagdemo-static-exec.test \
+	tests/tagdemo-conf.test \
+	tests/tagdemo-make.test \
+	tests/tagdemo-exec.test \
+	tests/tagdemo-shared.test \
+	tests/tagdemo-shared-make.test \
+	tests/tagdemo-shared-exec.test \
+	tests/tagdemo-undef.test \
+	tests/tagdemo-undef-make.test \
+	tests/tagdemo-undef-exec.test
+
+tests/tagdemo-undef-exec.log:	tests/tagdemo-undef-make.log
+tests/tagdemo-undef-make.log:	tests/tagdemo-undef.log
+tests/tagdemo-undef.log:	tests/tagdemo-shared-exec.log
+tests/tagdemo-shared-exec.log:	tests/tagdemo-shared-make.log
+tests/tagdemo-shared-make.log:	tests/tagdemo-shared.log
+tests/tagdemo-shared.log:	tests/tagdemo-exec.log
+tests/tagdemo-exec.log:		tests/tagdemo-make.log
+tests/tagdemo-make.log:		tests/tagdemo-conf.log
+tests/tagdemo-conf.log:		tests/tagdemo-static-exec.log
+tests/tagdemo-static-exec.log:	tests/tagdemo-static-make.log
+tests/tagdemo-static-make.log:	tests/tagdemo-static.log
+
+F77_TESTS = \
+	tests/f77demo-static.test \
+	tests/f77demo-static-make.test \
+	tests/f77demo-static-exec.test \
+	tests/f77demo-conf.test \
+	tests/f77demo-make.test \
+	tests/f77demo-exec.test \
+	tests/f77demo-shared.test \
+	tests/f77demo-shared-make.test \
+	tests/f77demo-shared-exec.test
+
+tests/f77demo-shared-exec.log:	tests/f77demo-shared-make.log
+tests/f77demo-shared-make.log:	tests/f77demo-shared.log
+tests/f77demo-shared.log:	tests/f77demo-exec.log
+tests/f77demo-exec.log:		tests/f77demo-make.log
+tests/f77demo-make.log:		tests/f77demo-conf.log
+tests/f77demo-conf.log:		tests/f77demo-static-exec.log
+tests/f77demo-static-exec.log:	tests/f77demo-static-make.log
+tests/f77demo-static-make.log:	tests/f77demo-static.log
+
+FC_TESTS = \
+	tests/fcdemo-static.test \
+	tests/fcdemo-static-make.test \
+	tests/fcdemo-static-exec.test \
+	tests/fcdemo-conf.test \
+	tests/fcdemo-make.test \
+	tests/fcdemo-exec.test \
+	tests/fcdemo-shared.test \
+	tests/fcdemo-shared-make.test \
+	tests/fcdemo-shared-exec.test
+
+tests/fcdemo-shared-exec.log:	tests/fcdemo-shared-make.log
+tests/fcdemo-shared-make.log:	tests/fcdemo-shared.log
+tests/fcdemo-shared.log:	tests/fcdemo-exec.log
+tests/fcdemo-exec.log:		tests/fcdemo-make.log
+tests/fcdemo-make.log:		tests/fcdemo-conf.log
+tests/fcdemo-conf.log:		tests/fcdemo-static-exec.log
+tests/fcdemo-static-exec.log:	tests/fcdemo-static-make.log
+tests/fcdemo-static-make.log:	tests/fcdemo-static.log
+
+COMMON_TESTS = \
+	tests/link.test \
+	tests/link-2.test \
+	tests/nomode.test \
+	tests/objectlist.test \
+	tests/quote.test \
+	tests/sh.test \
+	tests/suffix.test \
+	tests/tagtrace.test \
+	tests/cdemo-static.test \
+	tests/cdemo-static-make.test \
+	tests/cdemo-static-exec.test \
+	tests/demo-static.test \
+	tests/demo-static-make.test \
+	tests/demo-static-exec.test \
+	tests/demo-static-inst.test \
+	tests/demo-static-unst.test \
+	tests/depdemo-static.test \
+	tests/depdemo-static-make.test \
+	tests/depdemo-static-exec.test \
+	tests/depdemo-static-inst.test \
+	tests/depdemo-static-unst.test \
+	tests/mdemo-static.test \
+	tests/mdemo-static-make.test \
+	tests/mdemo-static-exec.test \
+	tests/mdemo-static-inst.test \
+	tests/mdemo-static-unst.test \
+	tests/cdemo-conf.test \
+	tests/cdemo-make.test \
+	tests/cdemo-exec.test \
+	tests/demo-conf.test \
+	tests/demo-make.test \
+	tests/demo-exec.test \
+	tests/demo-inst.test \
+	tests/demo-unst.test \
+	tests/demo-deplibs.test \
+	tests/depdemo-conf.test \
+	tests/depdemo-make.test \
+	tests/depdemo-exec.test \
+	tests/depdemo-inst.test \
+	tests/depdemo-unst.test \
+	tests/mdemo-conf.test \
+	tests/mdemo-make.test \
+	tests/mdemo-exec.test \
+	tests/mdemo-inst.test \
+	tests/mdemo-unst.test \
+	tests/mdemo-dryrun.test \
+	tests/mdemo2-conf.test \
+	tests/mdemo2-make.test \
+	tests/mdemo2-exec.test \
+	tests/pdemo-conf.test \
+	tests/pdemo-make.test \
+	tests/pdemo-exec.test \
+	tests/pdemo-inst.test \
+	tests/demo-nofast.test \
+	tests/demo-nofast-make.test \
+	tests/demo-nofast-exec.test \
+	tests/demo-nofast-inst.test \
+	tests/demo-nofast-unst.test \
+	tests/depdemo-nofast.test \
+	tests/depdemo-nofast-make.test \
+	tests/depdemo-nofast-exec.test \
+	tests/depdemo-nofast-inst.test \
+	tests/depdemo-nofast-unst.test \
+	tests/demo-pic.test \
+	tests/demo-pic-make.test \
+	tests/demo-pic-exec.test \
+	tests/demo-nopic.test \
+	tests/demo-nopic-make.test \
+	tests/demo-nopic-exec.test \
+	tests/cdemo-shared.test \
+	tests/cdemo-shared-make.test \
+	tests/cdemo-shared-exec.test \
+	tests/mdemo-shared.test \
+	tests/mdemo-shared-make.test \
+	tests/mdemo-shared-exec.test \
+	tests/mdemo-shared-inst.test \
+	tests/mdemo-shared-unst.test \
+	tests/cdemo-undef.test \
+	tests/cdemo-undef-make.test \
+	tests/cdemo-undef-exec.test
+
+# Actually, only demo-relink and depdemo-relink require interaction,
+# but they depend on the other tests being run beforehand.
+INTERACTIVE_TESTS = \
+	tests/demo-shared.test \
+	tests/demo-shared-make.test \
+	tests/demo-shared-exec.test \
+	tests/demo-shared-inst.test \
+	tests/demo-hardcode.test \
+	tests/demo-relink.test \
+	tests/demo-noinst-link.test \
+	tests/demo-shared-unst.test \
+	tests/depdemo-shared.test \
+	tests/depdemo-shared-make.test \
+	tests/depdemo-shared-exec.test \
+	tests/depdemo-shared-inst.test \
+	tests/depdemo-relink.test \
+	tests/depdemo-shared-unst.test
+
+tests/cdemo-undef-exec.log:	tests/cdemo-undef-make.log
+tests/cdemo-undef-make.log:	tests/cdemo-undef.log
+tests/cdemo-undef.log: @ORDER@	tests/cdemo-shared-exec.log
+tests/cdemo-shared-exec.log:	tests/cdemo-shared-make.log
+tests/cdemo-shared-make.log:	tests/cdemo-shared.log
+tests/cdemo-shared.log: @ORDER@	tests/cdemo-exec.log
+tests/cdemo-exec.log:		tests/cdemo-make.log
+tests/cdemo-make.log:		tests/cdemo-conf.log
+tests/cdemo-conf.log: @ORDER@	tests/cdemo-static-exec.log
+tests/cdemo-static-exec.log:	tests/cdemo-static-make.log
+tests/cdemo-static-make.log:	tests/cdemo-static.log
+
+tests/demo-shared-unst.log:	tests/demo-noinst-link.log
+tests/demo-noinst-link.log:	tests/demo-relink.log
+tests/demo-relink.log:		tests/demo-hardcode.log
+tests/demo-hardcode.log:	tests/demo-shared-inst.log
+tests/demo-shared-inst.log:	tests/demo-shared-exec.log
+tests/demo-shared-exec.log:	tests/demo-shared-make.log
+tests/demo-shared-make.log:	tests/demo-shared.log
+tests/demo-shared.log: @ORDER@	tests/demo-nopic-exec.log
+tests/demo-nopic-exec.log:	tests/demo-nopic-make.log
+tests/demo-nopic-make.log:	tests/demo-nopic.log
+tests/demo-nopic.log: @ORDER@	tests/demo-pic-exec.log
+tests/demo-pic-exec.log:	tests/demo-pic-make.log
+tests/demo-pic-make.log:	tests/demo-pic.log
+tests/demo-pic.log: @ORDER@	tests/demo-nofast-unst.log
+tests/demo-nofast-unst.log:	tests/demo-nofast-inst.log
+tests/demo-nofast-inst.log:	tests/demo-nofast-exec.log
+tests/demo-nofast-exec.log:	tests/demo-nofast-make.log
+tests/demo-nofast-make.log:	tests/demo-nofast.log
+tests/demo-nofast.log: @ORDER@	tests/demo-deplibs.log
+tests/demo-deplibs.log:		tests/demo-unst.log
+tests/demo-unst.log:		tests/demo-inst.log
+tests/demo-inst.log:		tests/demo-exec.log
+tests/demo-exec.log:		tests/demo-make.log
+tests/demo-make.log:		tests/demo-conf.log
+tests/demo-conf.log: @ORDER@	tests/demo-static-unst.log
+tests/demo-static-unst.log:	tests/demo-static-inst.log
+tests/demo-static-inst.log:	tests/demo-static-exec.log
+tests/demo-static-exec.log:	tests/demo-static-make.log
+tests/demo-static-make.log:	tests/demo-static.log
+
+tests/depdemo-shared-unst.log:	tests/depdemo-relink.log
+tests/depdemo-relink.log:	tests/depdemo-shared-inst.log
+tests/depdemo-shared-inst.log:	tests/depdemo-shared-exec.log
+tests/depdemo-shared-exec.log:	tests/depdemo-shared-make.log
+tests/depdemo-shared-make.log:	tests/depdemo-shared.log
+tests/depdemo-shared.log: @ORDER@ tests/depdemo-nofast-unst.log
+tests/depdemo-nofast-unst.log:	tests/depdemo-nofast-inst.log
+tests/depdemo-nofast-inst.log:	tests/depdemo-nofast-exec.log
+tests/depdemo-nofast-exec.log:	tests/depdemo-nofast-make.log
+tests/depdemo-nofast-make.log:	tests/depdemo-nofast.log
+tests/depdemo-nofast.log: @ORDER@ tests/depdemo-unst.log
+tests/depdemo-unst.log:		tests/depdemo-inst.log
+tests/depdemo-inst.log:		tests/depdemo-exec.log
+tests/depdemo-exec.log:		tests/depdemo-make.log
+tests/depdemo-make.log:		tests/depdemo-conf.log
+tests/depdemo-conf.log: @ORDER@	tests/depdemo-static-unst.log
+tests/depdemo-static-unst.log:	tests/depdemo-static-inst.log
+tests/depdemo-static-inst.log:	tests/depdemo-static-exec.log
+tests/depdemo-static-exec.log:	tests/depdemo-static-make.log
+tests/depdemo-static-make.log:	tests/depdemo-static.log
+
+tests/mdemo-shared-unst.log:	tests/mdemo-shared-inst.log
+tests/mdemo-shared-inst.log:	tests/mdemo-shared-exec.log
+tests/mdemo-shared-exec.log:	tests/mdemo-shared-make.log
+tests/mdemo-shared-make.log:	tests/mdemo-shared.log
+tests/mdemo-shared.log: @ORDER@	tests/mdemo-dryrun.log \
+				tests/mdemo2-exec.log
+
+tests/mdemo-dryrun.log:		tests/mdemo-unst.log
+tests/mdemo-unst.log:		tests/mdemo-inst.log
+tests/mdemo-inst.log:		tests/mdemo-exec.log
+tests/mdemo-exec.log:		tests/mdemo-make.log
+tests/mdemo-make.log:		tests/mdemo-conf.log
+tests/mdemo-conf.log: @ORDER@	tests/mdemo-static-unst.log
+tests/mdemo-static-unst.log:	tests/mdemo-static-inst.log
+tests/mdemo-static-inst.log:	tests/mdemo-static-exec.log
+tests/mdemo-static-exec.log:	tests/mdemo-static-make.log
+tests/mdemo-static-make.log:	tests/mdemo-static.log
+
+tests/mdemo2-exec.log:		tests/mdemo2-make.log
+tests/mdemo2-make.log:		tests/mdemo2-conf.log \
+				tests/mdemo-dryrun.log
+
+tests/pdemo-inst.log:		tests/pdemo-exec.log
+tests/pdemo-exec.log:		tests/pdemo-make.log
+tests/pdemo-make.log:		tests/pdemo-conf.log
+
+
+NONINTERACTIVE_TESTS = $(COMMON_TESTS)
+if HAVE_CXX
+NONINTERACTIVE_TESTS += $(CXX_TESTS)
+endif
+if HAVE_F77
+# f77demo-static-exec.test might be interactive on MSYS.
+INTERACTIVE_TESTS += $(F77_TESTS)
+endif
+if HAVE_FC
+NONINTERACTIVE_TESTS += $(FC_TESTS)
+endif
+TESTS = $(NONINTERACTIVE_TESTS) $(INTERACTIVE_TESTS)
+
+EXTRA_DIST     += $(srcdir)/tests/defs.in tests/defs.m4sh \
+		  $(COMMON_TESTS) $(CXX_TESTS) $(F77_TESTS) $(FC_TESTS) \
+		  $(INTERACTIVE_TESTS)
+DIST_SUBDIRS   += $(CONF_SUBDIRS)
+
+# The defs script shouldn't be recreated whenever the Makefile is
+# regenerated since the source tree can be read-only.
+check-recursive: tests/defs
+tests/defs: $(srcdir)/tests/defs.in
+	rm -f tests/defs.tmp tests/defs; \
+	$(configure_edit) $(srcdir)/tests/defs.in > tests/defs.tmp; \
+	mv -f tests/defs.tmp tests/defs
+
+# Use `$(srcdir)/tests' for the benefit of non-GNU makes: this is
+# how defs.in appears in our dependencies.
+$(srcdir)/tests/defs.in: $(auxdir)/general.m4sh tests/defs.m4sh Makefile.am
+	cd $(srcdir); \
+	rm -f tests/defs.in; \
+	$(M4SH) -B $(auxdir) tests/defs.m4sh > tests/defs.in
+
+# We need to remove any files that the above tests created.
+clean-local-legacy:
+	-for dir in $(CONF_SUBDIRS); do \
+	  if test -f $$dir/Makefile; then \
+	    (cd $$dir && $(MAKE) $(AM_MAKEFLAGS) distclean); \
+	  else :; fi; \
+	done
+	rm -rf _inst _inst-*
+
+# For distclean, we may have to fake Makefiles in the test directories
+# so that descending in DIST_SUBDIRS works.
+# Hide the additional dependency from automake so it still outputs the rule.
+distclean_recursive = distclean-recursive
+$(distclean_recursive): fake-distclean-legacy
+.PHONY: fake-distclean-legacy
+fake-distclean-legacy:
+	-for dir in $(CONF_SUBDIRS); do \
+	  if test ! -f $$dir/Makefile; then \
+	    $(mkinstalldirs) $$dir; \
+	    echo 'distclean: ; rm -f Makefile' > $$dir/Makefile; \
+	  else :; fi; \
+	done
+
+$(TESTS): tests/defs
+DISTCLEANFILES += tests/defs
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..e6e77c9
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,2695 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+#####
+
+
+
+VPATH = @srcdir@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+DIST_COMMON = README $(am__configure_deps) $(am__include_HEADERS_DIST) \
+	$(am__ltdlinclude_HEADERS_DIST) $(dist_man1_MANS) \
+	$(doc_libtool_TEXINFOS) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/config-h.in \
+	$(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi \
+	$(srcdir)/libltdl/Makefile.inc $(top_srcdir)/configure AUTHORS \
+	COPYING ChangeLog INSTALL NEWS THANKS TODO libltdl/argz.c \
+	libltdl/config/compile libltdl/config/config.guess \
+	libltdl/config/config.sub libltdl/config/depcomp \
+	libltdl/config/install-sh libltdl/config/ltmain.sh \
+	libltdl/config/mdate-sh libltdl/config/missing \
+	libltdl/config/texinfo.tex libltdl/lt__dirent.c \
+	libltdl/lt__strl.c
+@INSTALL_LTDL_TRUE@am__append_1 = libltdl/ltdl.h
+@INSTALL_LTDL_TRUE@am__append_2 = libltdl/libltdl.la
+@CONVENIENCE_LTDL_TRUE@am__append_3 = libltdl/libltdlc.la
+@HAVE_CXX_TRUE@am__append_4 = $(CXX_TESTS)
+# f77demo-static-exec.test might be interactive on MSYS.
+@HAVE_F77_TRUE@am__append_5 = $(F77_TESTS)
+@HAVE_FC_TRUE@am__append_6 = $(FC_TESTS)
+subdir = .
+SUBDIRS =
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/libltdl/m4/argz.m4 \
+	$(top_srcdir)/libltdl/m4/autobuild.m4 \
+	$(top_srcdir)/libltdl/m4/libtool.m4 \
+	$(top_srcdir)/libltdl/m4/ltdl.m4 \
+	$(top_srcdir)/libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+	"$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
+	"$(DESTDIR)$(includedir)" "$(DESTDIR)$(ltdlincludedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
+libltdl_dld_link_la_DEPENDENCIES =
+am__dirstamp = $(am__leading_dot)dirstamp
+am_libltdl_dld_link_la_OBJECTS = libltdl/loaders/dld_link.lo
+libltdl_dld_link_la_OBJECTS = $(am_libltdl_dld_link_la_OBJECTS)
+libltdl_dld_link_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_dld_link_la_LDFLAGS) $(LDFLAGS) -o $@
+am__DEPENDENCIES_1 =
+libltdl_dlopen_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_libltdl_dlopen_la_OBJECTS = libltdl/loaders/dlopen.lo
+libltdl_dlopen_la_OBJECTS = $(am_libltdl_dlopen_la_OBJECTS)
+libltdl_dlopen_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_dlopen_la_LDFLAGS) $(LDFLAGS) -o $@
+libltdl_dyld_la_LIBADD =
+am_libltdl_dyld_la_OBJECTS = libltdl/loaders/dyld.lo
+libltdl_dyld_la_OBJECTS = $(am_libltdl_dyld_la_OBJECTS)
+libltdl_dyld_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_dyld_la_LDFLAGS) $(LDFLAGS) -o $@
+LIBOBJDIR = libltdl/
+am_libltdl_libltdl_la_OBJECTS =  \
+	libltdl/loaders/libltdl_libltdl_la-preopen.lo \
+	libltdl/libltdl_libltdl_la-lt__alloc.lo \
+	libltdl/libltdl_libltdl_la-lt_dlloader.lo \
+	libltdl/libltdl_libltdl_la-lt_error.lo \
+	libltdl/libltdl_libltdl_la-ltdl.lo \
+	libltdl/libltdl_libltdl_la-slist.lo
+libltdl_libltdl_la_OBJECTS = $(am_libltdl_libltdl_la_OBJECTS)
+libltdl_libltdl_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_libltdl_la_LDFLAGS) $(LDFLAGS) -o $@
+@INSTALL_LTDL_TRUE@am_libltdl_libltdl_la_rpath = -rpath $(libdir)
+am__objects_1 = libltdl/loaders/libltdl_libltdlc_la-preopen.lo \
+	libltdl/libltdl_libltdlc_la-lt__alloc.lo \
+	libltdl/libltdl_libltdlc_la-lt_dlloader.lo \
+	libltdl/libltdl_libltdlc_la-lt_error.lo \
+	libltdl/libltdl_libltdlc_la-ltdl.lo \
+	libltdl/libltdl_libltdlc_la-slist.lo
+am_libltdl_libltdlc_la_OBJECTS = $(am__objects_1)
+libltdl_libltdlc_la_OBJECTS = $(am_libltdl_libltdlc_la_OBJECTS)
+libltdl_libltdlc_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_libltdlc_la_LDFLAGS) $(LDFLAGS) -o $@
+@CONVENIENCE_LTDL_TRUE@am_libltdl_libltdlc_la_rpath =
+libltdl_load_add_on_la_LIBADD =
+am_libltdl_load_add_on_la_OBJECTS = libltdl/loaders/load_add_on.lo
+libltdl_load_add_on_la_OBJECTS = $(am_libltdl_load_add_on_la_OBJECTS)
+libltdl_load_add_on_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_load_add_on_la_LDFLAGS) $(LDFLAGS) -o $@
+libltdl_loadlibrary_la_LIBADD =
+am_libltdl_loadlibrary_la_OBJECTS = libltdl/loaders/loadlibrary.lo
+libltdl_loadlibrary_la_OBJECTS = $(am_libltdl_loadlibrary_la_OBJECTS)
+libltdl_loadlibrary_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_loadlibrary_la_LDFLAGS) $(LDFLAGS) -o $@
+libltdl_shl_load_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_libltdl_shl_load_la_OBJECTS = libltdl/loaders/shl_load.lo
+libltdl_shl_load_la_OBJECTS = $(am_libltdl_shl_load_la_OBJECTS)
+libltdl_shl_load_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_shl_load_la_LDFLAGS) $(LDFLAGS) -o $@
+SCRIPTS = $(bin_SCRIPTS)
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/libltdl/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libltdl_dld_link_la_SOURCES) $(libltdl_dlopen_la_SOURCES) \
+	$(libltdl_dyld_la_SOURCES) $(libltdl_libltdl_la_SOURCES) \
+	$(libltdl_libltdlc_la_SOURCES) \
+	$(libltdl_load_add_on_la_SOURCES) \
+	$(libltdl_loadlibrary_la_SOURCES) \
+	$(libltdl_shl_load_la_SOURCES)
+DIST_SOURCES = $(libltdl_dld_link_la_SOURCES) \
+	$(libltdl_dlopen_la_SOURCES) $(libltdl_dyld_la_SOURCES) \
+	$(libltdl_libltdl_la_SOURCES) $(libltdl_libltdlc_la_SOURCES) \
+	$(libltdl_load_add_on_la_SOURCES) \
+	$(libltdl_loadlibrary_la_SOURCES) \
+	$(libltdl_shl_load_la_SOURCES)
+INFO_DEPS = $(srcdir)/doc/libtool.info
+TEXINFO_TEX = $(top_srcdir)/libltdl/config/texinfo.tex
+am__TEXINFO_TEX_DIR = $(top_srcdir)/libltdl/config
+DVIS = doc/libtool.dvi
+PDFS = doc/libtool.pdf
+PSS = doc/libtool.ps
+HTMLS = doc/libtool.html
+TEXINFOS = doc/libtool.texi
+TEXI2DVI = texi2dvi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(dist_man1_MANS)
+am__include_HEADERS_DIST = libltdl/ltdl.h
+am__ltdlinclude_HEADERS_DIST = libltdl/libltdl/lt_system.h \
+	libltdl/libltdl/lt_error.h libltdl/libltdl/lt_dlloader.h
+HEADERS = $(include_HEADERS) $(ltdlinclude_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	check check-html recheck recheck-html distdir dist dist-all \
+	distcheck
+ETAGS = etags
+CTAGS = ctags
+# If stdout is a non-dumb tty, use colors.  If test -t is not supported,
+# then this fails; a conservative approach.  Of course do not redirect
+# stdout here, just stderr.
+am__tty_colors = \
+red=; grn=; lgn=; blu=; std=; \
+test "X$(AM_COLOR_TESTS)" != Xno \
+&& test "X$$TERM" != Xdumb \
+&& { test "X$(AM_COLOR_TESTS)" = Xalways || test -t 1 2>/dev/null; } \
+&& { \
+  red=''; \
+  grn=''; \
+  lgn=''; \
+  blu=''; \
+  std=''; \
+}
+# Restructured Text title and section.
+am__rst_title = sed 's/.*/   &   /;h;s/./=/g;p;x;p;g;p;s/.*//'
+am__rst_section = sed 'p;s/./=/g;p;g'
+# Put stdin (possibly several lines separated by ".  ") in a box.
+am__text_box = $(AWK) '{				\
+  n = split($$0, lines, "\\.  "); max = 0;		\
+  for (i = 1; i <= n; ++i)				\
+    if (max < length(lines[i]))				\
+      max = length(lines[i]);				\
+  for (i = 0; i < max; ++i) line = line "=";		\
+  print line;						\
+  for (i = 1; i <= n; ++i) if (lines[i]) print lines[i];\
+  print line;						\
+}'
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL).  This contradicts POSIX.  Work around the problem
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# To be inserted before the command running the test.  Creates the
+# directory for the log if needed.  Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log, and passes
+# TESTS_ENVIRONMENT.  Save and restore TERM around use of
+# TESTS_ENVIRONMENT, in case that unsets it.
+am__check_pre = \
+$(am__sh_e_setup);					\
+$(am__vpath_adj_setup) $(am__vpath_adj)			\
+srcdir=$(srcdir); export srcdir;			\
+rm -f $@-t;						\
+trap 'st=$$?; rm -f '\''$(abs_builddir)/$@-t'\''; (exit $$st); exit $$st' \
+  1 2 13 15;						\
+am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;		\
+test "x$$am__odir" = x. || $(MKDIR_P) "$$am__odir" || exit $$?;	\
+if test -f "./$$f"; then dir=./;			\
+elif test -f "$$f"; then dir=;				\
+else dir="$(srcdir)/"; fi;				\
+tst=$$dir$$f; log='$@'; __SAVED_TERM=$$TERM;		\
+$(TESTS_ENVIRONMENT)
+RECHECK_LOGS = $(TEST_LOGS)
+TEST_SUITE_LOG = test-suite.log
+TEST_SUITE_HTML = $(TEST_SUITE_LOG:.log=.html)
+TEST_EXTENSIONS = @EXEEXT@ .test
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+	$(TEST_LOG_FLAGS)
+TEST_LOGS_TMP = $(TEST_LOGS:.log=.log-t)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+pkgdatadir = @pkgdatadir@
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+ARGZ_H = @ARGZ_H@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOM4TE = @AUTOM4TE@
+AUTOMAKE = @AUTOMAKE@
+AUTOTEST = @AUTOTEST@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CONFIG_STATUS_DEPENDENCIES = @CONFIG_STATUS_DEPENDENCIES@
+CONF_SUBDIRS = @CONF_SUBDIRS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DIST_MAKEFILE_LIST = @DIST_MAKEFILE_LIST@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FFLAGS = @FFLAGS@
+FGREP = @FGREP@
+GCJ = @GCJ@
+GCJFLAGS = @GCJFLAGS@
+GOC = @GOC@
+GREP = @GREP@
+HELP2MAN = @HELP2MAN@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LASTRELEASE = @LASTRELEASE@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBADD_DL = @LIBADD_DL@
+LIBADD_DLD_LINK = @LIBADD_DLD_LINK@
+LIBADD_DLOPEN = @LIBADD_DLOPEN@
+LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTDLOPEN = @LTDLOPEN@
+LTLIBOBJS = @LTLIBOBJS@
+LT_CONFIG_H = @LT_CONFIG_H@
+LT_DLLOADERS = @LT_DLLOADERS@
+LT_DLPREOPEN = @LT_DLPREOPEN@
+M4SH = @M4SH@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+ORDER = @ORDER@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TIMESTAMP = @TIMESTAMP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_FC = @ac_ct_FC@
+aclocaldir = @aclocaldir@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+package_revision = @package_revision@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sys_symbol_underscore = @sys_symbol_underscore@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+to_host_file_cmd = @to_host_file_cmd@
+to_tool_file_cmd = @to_tool_file_cmd@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ACLOCAL_AMFLAGS = -I libltdl/m4
+
+# -I$(srcdir) is needed for user that built libltdl with a sub-Automake
+# (not as a sub-package!) using 'nostdinc':
+AM_CPPFLAGS = -DLT_CONFIG_H='<$(LT_CONFIG_H)>' -DLTDL -I. -I$(srcdir) \
+	-Ilibltdl -I$(srcdir)/libltdl -I$(srcdir)/libltdl/libltdl
+AM_LDFLAGS = -no-undefined
+DIST_SUBDIRS = . $(CONF_SUBDIRS)
+
+# Use `$(srcdir)' for the benefit of non-GNU makes: this is
+# how libtoolize.in appears in our dependencies.
+EXTRA_DIST = bootstrap $(srcdir)/libtoolize.in $(auxdir)/ltmain.m4sh \
+	$(auxdir)/mkstamp $(sh_files) ChangeLog.1996 ChangeLog.1997 \
+	ChangeLog.1998 ChangeLog.1999 ChangeLog.2000 ChangeLog.2001 \
+	ChangeLog.2002 ChangeLog.2003 ChangeLog.2004 ChangeLog.2005 \
+	ChangeLog.2006 ChangeLog.2007 ChangeLog.2008 ChangeLog.2009 \
+	ChangeLog.2010 $(m4dir)/ltversion.in \
+	$(srcdir)/$(m4dir)/ltversion.m4 $(srcdir)/$(auxdir)/ltmain.sh \
+	libtoolize.m4sh libltdl/lt__dirent.c libltdl/lt__strl.c \
+	libltdl/COPYING.LIB libltdl/configure.ac libltdl/Makefile.am \
+	libltdl/aclocal.m4 libltdl/Makefile.in libltdl/configure \
+	libltdl/config-h.in libltdl/README libltdl/argz_.h \
+	libltdl/argz.c $(srcdir)/libltdl/stamp-mk \
+	$(m4dir)/lt~obsolete.m4 $(srcdir)/doc/notes.txt \
+	$(edit_readme_alpha) $(srcdir)/$(TESTSUITE) $(TESTSUITE_AT) \
+	$(srcdir)/tests/package.m4 $(srcdir)/tests/defs.in \
+	tests/defs.m4sh $(COMMON_TESTS) $(CXX_TESTS) $(F77_TESTS) \
+	$(FC_TESTS) $(INTERACTIVE_TESTS)
+BUILT_SOURCES = libtool libtoolize libltdl/$(ARGZ_H)
+CLEANFILES = libtool libtoolize libtoolize.tmp $(auxdir)/ltmain.tmp \
+	$(m4dir)/ltversion.tmp libltdl/libltdl.la libltdl/libltdlc.la \
+	libltdl/libdlloader.la $(LIBOBJS) $(LTLIBOBJS)
+MOSTLYCLEANFILES = libltdl/argz.h libltdl/argz.h-t
+DISTCLEANFILES = libtool.dvi tests/atconfig tests/defs
+MAINTAINERCLEANFILES = $(dist_man1_MANS)
+include_HEADERS = $(am__append_1)
+noinst_LTLIBRARIES = $(LT_DLLOADERS) $(am__append_3)
+lib_LTLIBRARIES = $(am__append_2)
+EXTRA_LTLIBRARIES = libltdl/dlopen.la libltdl/dld_link.la \
+	libltdl/dyld.la libltdl/load_add_on.la libltdl/loadlibrary.la \
+	libltdl/shl_load.la
+auxdir = libltdl/config
+m4dir = libltdl/m4
+
+# Using `cd' in backquotes may print the directory name, use this instead:
+lt__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+MKSTAMP = $(SHELL) $(srcdir)/$(auxdir)/mkstamp
+timestamp = set dummy `$(MKSTAMP) $(srcdir)`; shift; \
+	case $(VERSION) in \
+	  *[acegikmoqsuwy]) TIMESTAMP=" $$1 $$2" ;; \
+	  *) TIMESTAMP="" ;; \
+	esac
+
+rebuild = rebuild=:; $(timestamp); correctver=$$1
+
+# ---------- #
+# Bootstrap. #
+# ---------- #
+sh_files = $(auxdir)/general.m4sh $(auxdir)/getopt.m4sh
+bootstrap_edit = sed \
+		  -e 's,@MACRO_VERSION\@,$(VERSION),g' \
+		  -e "s,@MACRO_REVISION\@,$$correctver,g" \
+		  -e "s,@MACRO_SERIAL\@,$$serial,g" \
+		  -e 's,@PACKAGE\@,$(PACKAGE),g' \
+		  -e 's,@PACKAGE_BUGREPORT\@,$(PACKAGE_BUGREPORT),g' \
+		  -e 's,@PACKAGE_URL\@,$(PACKAGE_URL),g' \
+		  -e 's,@PACKAGE_NAME\@,$(PACKAGE_NAME),g' \
+		  -e "s,@package_revision\@,$$correctver,g" \
+		  -e 's,@PACKAGE_STRING\@,$(PACKAGE_NAME) $(VERSION),g' \
+		  -e 's,@PACKAGE_TARNAME\@,$(PACKAGE),g' \
+		  -e 's,@PACKAGE_VERSION\@,$(VERSION),g' \
+		  -e "s,@TIMESTAMP\@,$$TIMESTAMP,g" \
+		  -e 's,@VERSION\@,$(VERSION),g'
+
+LTDL_BOOTSTRAP_DEPS = $(srcdir)/libltdl/aclocal.m4 \
+	$(srcdir)/libltdl/stamp-mk \
+	$(srcdir)/libltdl/configure \
+	$(srcdir)/libltdl/config-h.in
+
+configure_edit = sed \
+	-e 's,@aclocal_DATA\@,$(aclocalfiles),g' \
+	-e 's,@aclocaldir\@,$(aclocaldir),g' \
+	-e 's,@datadir\@,$(datadir),g' \
+	-e 's,@EGREP\@,$(EGREP),g' \
+	-e 's,@FGREP\@,$(FGREP),g' \
+	-e 's,@GREP\@,$(GREP),g' \
+	-e 's,@host_triplet\@,$(host_triplet),g' \
+	-e 's,@LN_S\@,$(LN_S),g' \
+	-e "s,@pkgconfig_files\@,$(auxfiles),g" \
+	-e 's,@pkgdatadir\@,$(pkgdatadir),g' \
+	-e "s,@pkgltdl_files\@,$(ltdldatafiles),g" \
+	-e 's,@prefix\@,$(prefix),g' \
+	-e 's,@SED\@,$(SED),g'
+
+
+# The libtool distributor and the standalone libtool script.
+bin_SCRIPTS = libtoolize libtool
+LTDL_VERSION_INFO = -version-info 10:0:3
+@INSTALL_LTDL_TRUE@ltdlincludedir = $(includedir)/libltdl
+@INSTALL_LTDL_TRUE@ltdlinclude_HEADERS = libltdl/libltdl/lt_system.h \
+@INSTALL_LTDL_TRUE@			  libltdl/libltdl/lt_error.h \
+@INSTALL_LTDL_TRUE@			  libltdl/libltdl/lt_dlloader.h
+
+libltdl_libltdl_la_SOURCES = libltdl/libltdl/lt__alloc.h \
+			  libltdl/libltdl/lt__dirent.h \
+			  libltdl/libltdl/lt__glibc.h \
+			  libltdl/libltdl/lt__private.h \
+			  libltdl/libltdl/lt__strl.h \
+			  libltdl/libltdl/lt_dlloader.h \
+			  libltdl/libltdl/lt_error.h \
+	                  libltdl/libltdl/lt_system.h \
+			  libltdl/libltdl/slist.h \
+			  libltdl/loaders/preopen.c \
+			  libltdl/lt__alloc.c \
+			  libltdl/lt_dlloader.c \
+			  libltdl/lt_error.c \
+			  libltdl/ltdl.c \
+			  libltdl/ltdl.h \
+			  libltdl/slist.c
+
+libltdl_libltdl_la_CPPFLAGS = -DLTDLOPEN=$(LTDLOPEN) $(AM_CPPFLAGS)
+libltdl_libltdl_la_LDFLAGS = $(AM_LDFLAGS) $(LTDL_VERSION_INFO) $(LT_DLPREOPEN)
+libltdl_libltdl_la_LIBADD = $(LTLIBOBJS)
+libltdl_libltdl_la_DEPENDENCIES = $(LT_DLLOADERS) $(LTLIBOBJS)
+libltdl_libltdlc_la_SOURCES = $(libltdl_libltdl_la_SOURCES)
+libltdl_libltdlc_la_CPPFLAGS = -DLTDLOPEN=$(LTDLOPEN)c $(AM_CPPFLAGS)
+libltdl_libltdlc_la_LDFLAGS = $(AM_LDFLAGS) $(LT_DLPREOPEN)
+libltdl_libltdlc_la_LIBADD = $(libltdl_libltdl_la_LIBADD)
+libltdl_libltdlc_la_DEPENDENCIES = $(libltdl_libltdl_la_DEPENDENCIES)
+libltdl_dlopen_la_SOURCES = libltdl/loaders/dlopen.c
+libltdl_dlopen_la_LDFLAGS = -module -avoid-version
+libltdl_dlopen_la_LIBADD = $(LIBADD_DLOPEN)
+libltdl_dld_link_la_SOURCES = libltdl/loaders/dld_link.c
+libltdl_dld_link_la_LDFLAGS = -module -avoid-version
+libltdl_dld_link_la_LIBADD = -ldld
+libltdl_dyld_la_SOURCES = libltdl/loaders/dyld.c
+libltdl_dyld_la_LDFLAGS = -module -avoid-version
+libltdl_load_add_on_la_SOURCES = libltdl/loaders/load_add_on.c
+libltdl_load_add_on_la_LDFLAGS = -module -avoid-version
+libltdl_loadlibrary_la_SOURCES = libltdl/loaders/loadlibrary.c
+libltdl_loadlibrary_la_LDFLAGS = -module -avoid-version
+libltdl_shl_load_la_SOURCES = libltdl/loaders/shl_load.c
+libltdl_shl_load_la_LDFLAGS = -module -avoid-version
+libltdl_shl_load_la_LIBADD = $(LIBADD_SHL_LOAD)
+sub_aclocal_m4_deps = \
+	$(srcdir)/libltdl/configure.ac \
+	$(m4dir)/libtool.m4 \
+	$(m4dir)/ltoptions.m4 \
+	$(m4dir)/ltdl.m4 \
+	$(srcdir)/$(m4dir)/ltversion.m4 \
+	$(m4dir)/ltsugar.m4 \
+	$(m4dir)/argz.m4 \
+	$(m4dir)/lt~obsolete.m4
+
+sub_configure_deps = $(sub_aclocal_m4_deps) $(srcdir)/libltdl/aclocal.m4
+info_TEXINFOS = doc/libtool.texi
+doc_libtool_TEXINFOS = doc/PLATFORMS doc/fdl.texi doc/notes.texi
+dist_man1_MANS = $(srcdir)/doc/libtool.1 $(srcdir)/doc/libtoolize.1
+update_mans = \
+  PATH=".$(PATH_SEPARATOR)$$PATH"; export PATH; \
+  $(HELP2MAN) --output=$@
+
+
+# These are required by libtoolize and must be executable when installed.
+# The timestamps on these files must be preserved carefully so we install,
+# uninstall and set executable with custom rules here.
+auxexefiles = config/compile config/config.guess config/config.sub \
+		  config/depcomp config/install-sh config/missing
+
+auxfiles = $(auxexefiles) config/ltmain.sh
+
+# Everything that gets picked up by aclocal is automatically distributed,
+# this is the list of macro files we install on the user's system.
+aclocalfiles = m4/argz.m4 m4/libtool.m4 m4/ltdl.m4 m4/ltoptions.m4 \
+		  m4/ltsugar.m4 m4/ltversion.m4 m4/lt~obsolete.m4
+
+ltdldatafiles = libltdl/COPYING.LIB \
+		  libltdl/README \
+		  libltdl/Makefile.inc \
+		  libltdl/Makefile.am \
+		  libltdl/configure.ac \
+		  libltdl/aclocal.m4 \
+		  libltdl/Makefile.in \
+		  libltdl/config-h.in \
+		  libltdl/configure \
+		  libltdl/argz_.h \
+		  libltdl/argz.c \
+		  libltdl/loaders/dld_link.c \
+		  libltdl/loaders/dlopen.c \
+		  libltdl/loaders/dyld.c \
+		  libltdl/loaders/load_add_on.c \
+		  libltdl/loaders/loadlibrary.c \
+		  libltdl/loaders/shl_load.c \
+		  libltdl/lt__dirent.c \
+		  libltdl/lt__strl.c \
+		  $(libltdl_libltdl_la_SOURCES)
+
+edit_readme_alpha = $(auxdir)/edit-readme-alpha
+
+# The testsuite files are evaluated in the order given here.
+TESTSUITE = tests/testsuite
+TESTSUITE_AT = tests/testsuite.at \
+		  tests/getopt-m4sh.at \
+		  tests/libtoolize.at \
+		  tests/help.at \
+		  tests/duplicate_members.at \
+		  tests/duplicate_conv.at \
+		  tests/duplicate_deps.at \
+		  tests/flags.at \
+		  tests/inherited_flags.at \
+		  tests/convenience.at \
+		  tests/link-order.at \
+		  tests/link-order2.at \
+		  tests/fail.at \
+		  tests/shlibpath.at \
+		  tests/runpath-in-lalib.at \
+		  tests/static.at \
+		  tests/export.at \
+		  tests/search-path.at \
+		  tests/indirect_deps.at \
+		  tests/archive-in-archive.at \
+		  tests/exeext.at \
+		  tests/execute-mode.at \
+		  tests/bindir.at \
+		  tests/cwrapper.at \
+		  tests/deplib-in-subdir.at \
+		  tests/infer-tag.at \
+		  tests/localization.at \
+		  tests/nocase.at \
+		  tests/install.at \
+		  tests/versioning.at \
+		  tests/destdir.at \
+		  tests/old-m4-iface.at \
+		  tests/am-subdir.at \
+		  tests/lt_dlexit.at \
+		  tests/lt_dladvise.at \
+		  tests/lt_dlopen.at \
+		  tests/lt_dlopen_a.at \
+		  tests/lt_dlopenext.at \
+		  tests/ltdl-libdir.at \
+		  tests/ltdl-api.at \
+		  tests/dlloader-api.at \
+		  tests/loadlibrary.at \
+		  tests/lalib-syntax.at \
+		  tests/resident.at \
+		  tests/slist.at \
+		  tests/need_lib_prefix.at \
+		  tests/standalone.at \
+		  tests/subproject.at \
+		  tests/nonrecursive.at \
+		  tests/recursive.at \
+		  tests/template.at \
+		  tests/ctor.at \
+		  tests/exceptions.at \
+		  tests/early-libtool.at \
+		  tests/with-pic.at \
+		  tests/no-executables.at \
+		  tests/deplibs-ident.at \
+		  tests/configure-iface.at \
+		  tests/stresstest.at \
+		  tests/cmdline_wrap.at \
+		  tests/pic_flag.at \
+		  tests/darwin.at \
+		  tests/dumpbin-symbols.at \
+		  tests/deplibs-mingw.at \
+		  tests/sysroot.at
+
+
+# Be sure to reexport important environment variables:
+TESTS_ENVIRONMENT = MAKE="$(MAKE)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
+	CPP="$(CPP)" CPPFLAGS="$(CPPFLAGS)" LD="$(LD)" LDFLAGS="$(LDFLAGS)" \
+	LIBS="$(LIBS)" LN_S="$(LN_S)" NM="$(NM)" RANLIB="$(RANLIB)" \
+	AR="$(AR)" \
+	M4SH="$(M4SH)" SED="$(SED)" STRIP="$(STRIP)" lt_INSTALL="$(INSTALL)" \
+	MANIFEST_TOOL="$(MANIFEST_TOOL)" \
+	OBJEXT="$(OBJEXT)" EXEEXT="$(EXEEXT)" \
+	SHELL="$(SHELL)" CONFIG_SHELL="$(SHELL)" \
+	CXX="$(CXX)" CXXFLAGS="$(CXXFLAGS)" CXXCPP="$(CXXCPP)" \
+	F77="$(F77)" FFLAGS="$(FFLAGS)" \
+	FC="$(FC)" FCFLAGS="$(FCFLAGS)" \
+	GCJ="$(GCJ)" GCJFLAGS="$(GCJFLAGS)" \
+	lt_cv_to_host_file_cmd="$(to_host_file_cmd)" \
+	lt_cv_to_tool_file_cmd="$(to_tool_file_cmd)"
+
+BUILDCHECK_ENVIRONMENT = _lt_pkgdatadir="$(abs_top_srcdir)" \
+	LIBTOOLIZE="$(abs_top_builddir)/libtoolize" \
+	LIBTOOL="$(abs_top_builddir)/libtool" \
+	tst_aclocaldir="$(abs_top_srcdir)/libltdl/m4"
+
+INSTALLCHECK_ENVIRONMENT = \
+	LIBTOOLIZE="$(bindir)/`echo libtoolize | sed '$(program_transform_name)'`" \
+	LIBTOOL="$(bindir)/`echo libtool | sed '$(program_transform_name)'`" \
+	LTDLINCL="-I$(includedir)" \
+	LIBLTDL="$(libdir)/libltdl.la" \
+	tst_aclocaldir="$(aclocaldir)"
+
+CD_TESTDIR = abs_srcdir=`$(lt__cd) $(srcdir) && pwd`; cd tests
+testsuite_deps = tests/atconfig $(srcdir)/$(TESTSUITE)
+testsuite_deps_uninstalled = $(testsuite_deps) libltdl/libltdlc.la \
+			     $(bin_SCRIPTS) $(LTDL_BOOTSTRAP_DEPS)
+
+
+# !WARNING! Don't add any new tests here, we are migrating to an
+#           Autotest driven framework, please add new test cases
+#           using the new framework above.  When the migration is
+#           complete this section should be removed.
+CXX_TESTS = \
+	tests/tagdemo-static.test \
+	tests/tagdemo-static-make.test \
+	tests/tagdemo-static-exec.test \
+	tests/tagdemo-conf.test \
+	tests/tagdemo-make.test \
+	tests/tagdemo-exec.test \
+	tests/tagdemo-shared.test \
+	tests/tagdemo-shared-make.test \
+	tests/tagdemo-shared-exec.test \
+	tests/tagdemo-undef.test \
+	tests/tagdemo-undef-make.test \
+	tests/tagdemo-undef-exec.test
+
+F77_TESTS = \
+	tests/f77demo-static.test \
+	tests/f77demo-static-make.test \
+	tests/f77demo-static-exec.test \
+	tests/f77demo-conf.test \
+	tests/f77demo-make.test \
+	tests/f77demo-exec.test \
+	tests/f77demo-shared.test \
+	tests/f77demo-shared-make.test \
+	tests/f77demo-shared-exec.test
+
+FC_TESTS = \
+	tests/fcdemo-static.test \
+	tests/fcdemo-static-make.test \
+	tests/fcdemo-static-exec.test \
+	tests/fcdemo-conf.test \
+	tests/fcdemo-make.test \
+	tests/fcdemo-exec.test \
+	tests/fcdemo-shared.test \
+	tests/fcdemo-shared-make.test \
+	tests/fcdemo-shared-exec.test
+
+COMMON_TESTS = \
+	tests/link.test \
+	tests/link-2.test \
+	tests/nomode.test \
+	tests/objectlist.test \
+	tests/quote.test \
+	tests/sh.test \
+	tests/suffix.test \
+	tests/tagtrace.test \
+	tests/cdemo-static.test \
+	tests/cdemo-static-make.test \
+	tests/cdemo-static-exec.test \
+	tests/demo-static.test \
+	tests/demo-static-make.test \
+	tests/demo-static-exec.test \
+	tests/demo-static-inst.test \
+	tests/demo-static-unst.test \
+	tests/depdemo-static.test \
+	tests/depdemo-static-make.test \
+	tests/depdemo-static-exec.test \
+	tests/depdemo-static-inst.test \
+	tests/depdemo-static-unst.test \
+	tests/mdemo-static.test \
+	tests/mdemo-static-make.test \
+	tests/mdemo-static-exec.test \
+	tests/mdemo-static-inst.test \
+	tests/mdemo-static-unst.test \
+	tests/cdemo-conf.test \
+	tests/cdemo-make.test \
+	tests/cdemo-exec.test \
+	tests/demo-conf.test \
+	tests/demo-make.test \
+	tests/demo-exec.test \
+	tests/demo-inst.test \
+	tests/demo-unst.test \
+	tests/demo-deplibs.test \
+	tests/depdemo-conf.test \
+	tests/depdemo-make.test \
+	tests/depdemo-exec.test \
+	tests/depdemo-inst.test \
+	tests/depdemo-unst.test \
+	tests/mdemo-conf.test \
+	tests/mdemo-make.test \
+	tests/mdemo-exec.test \
+	tests/mdemo-inst.test \
+	tests/mdemo-unst.test \
+	tests/mdemo-dryrun.test \
+	tests/mdemo2-conf.test \
+	tests/mdemo2-make.test \
+	tests/mdemo2-exec.test \
+	tests/pdemo-conf.test \
+	tests/pdemo-make.test \
+	tests/pdemo-exec.test \
+	tests/pdemo-inst.test \
+	tests/demo-nofast.test \
+	tests/demo-nofast-make.test \
+	tests/demo-nofast-exec.test \
+	tests/demo-nofast-inst.test \
+	tests/demo-nofast-unst.test \
+	tests/depdemo-nofast.test \
+	tests/depdemo-nofast-make.test \
+	tests/depdemo-nofast-exec.test \
+	tests/depdemo-nofast-inst.test \
+	tests/depdemo-nofast-unst.test \
+	tests/demo-pic.test \
+	tests/demo-pic-make.test \
+	tests/demo-pic-exec.test \
+	tests/demo-nopic.test \
+	tests/demo-nopic-make.test \
+	tests/demo-nopic-exec.test \
+	tests/cdemo-shared.test \
+	tests/cdemo-shared-make.test \
+	tests/cdemo-shared-exec.test \
+	tests/mdemo-shared.test \
+	tests/mdemo-shared-make.test \
+	tests/mdemo-shared-exec.test \
+	tests/mdemo-shared-inst.test \
+	tests/mdemo-shared-unst.test \
+	tests/cdemo-undef.test \
+	tests/cdemo-undef-make.test \
+	tests/cdemo-undef-exec.test
+
+
+# Actually, only demo-relink and depdemo-relink require interaction,
+# but they depend on the other tests being run beforehand.
+INTERACTIVE_TESTS = tests/demo-shared.test tests/demo-shared-make.test \
+	tests/demo-shared-exec.test tests/demo-shared-inst.test \
+	tests/demo-hardcode.test tests/demo-relink.test \
+	tests/demo-noinst-link.test tests/demo-shared-unst.test \
+	tests/depdemo-shared.test tests/depdemo-shared-make.test \
+	tests/depdemo-shared-exec.test tests/depdemo-shared-inst.test \
+	tests/depdemo-relink.test tests/depdemo-shared-unst.test \
+	$(am__append_5)
+NONINTERACTIVE_TESTS = $(COMMON_TESTS) $(am__append_4) $(am__append_6)
+TESTS = $(NONINTERACTIVE_TESTS) $(INTERACTIVE_TESTS)
+
+# For distclean, we may have to fake Makefiles in the test directories
+# so that descending in DIST_SUBDIRS works.
+# Hide the additional dependency from automake so it still outputs the rule.
+distclean_recursive = distclean-recursive
+all: $(BUILT_SOURCES) config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .dvi .html .lo .log .o .obj .ps .test .test$(EXEEXT)
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(srcdir)/libltdl/Makefile.inc $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config-h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config-h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libltdl/loaders/$(am__dirstamp):
+	@$(MKDIR_P) libltdl/loaders
+	@: > libltdl/loaders/$(am__dirstamp)
+libltdl/loaders/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) libltdl/loaders/$(DEPDIR)
+	@: > libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+libltdl/loaders/dld_link.lo: libltdl/loaders/$(am__dirstamp) \
+	libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+libltdl/$(am__dirstamp):
+	@$(MKDIR_P) libltdl
+	@: > libltdl/$(am__dirstamp)
+libltdl/dld_link.la: $(libltdl_dld_link_la_OBJECTS) $(libltdl_dld_link_la_DEPENDENCIES) libltdl/$(am__dirstamp)
+	$(libltdl_dld_link_la_LINK)  $(libltdl_dld_link_la_OBJECTS) $(libltdl_dld_link_la_LIBADD) $(LIBS)
+libltdl/loaders/dlopen.lo: libltdl/loaders/$(am__dirstamp) \
+	libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+libltdl/dlopen.la: $(libltdl_dlopen_la_OBJECTS) $(libltdl_dlopen_la_DEPENDENCIES) libltdl/$(am__dirstamp)
+	$(libltdl_dlopen_la_LINK)  $(libltdl_dlopen_la_OBJECTS) $(libltdl_dlopen_la_LIBADD) $(LIBS)
+libltdl/loaders/dyld.lo: libltdl/loaders/$(am__dirstamp) \
+	libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+libltdl/dyld.la: $(libltdl_dyld_la_OBJECTS) $(libltdl_dyld_la_DEPENDENCIES) libltdl/$(am__dirstamp)
+	$(libltdl_dyld_la_LINK)  $(libltdl_dyld_la_OBJECTS) $(libltdl_dyld_la_LIBADD) $(LIBS)
+libltdl/loaders/libltdl_libltdl_la-preopen.lo:  \
+	libltdl/loaders/$(am__dirstamp) \
+	libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+libltdl/$(DEPDIR)/$(am__dirstamp):
+	@$(MKDIR_P) libltdl/$(DEPDIR)
+	@: > libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdl_la-lt__alloc.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdl_la-lt_dlloader.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdl_la-lt_error.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdl_la-ltdl.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdl_la-slist.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl.la: $(libltdl_libltdl_la_OBJECTS) $(libltdl_libltdl_la_DEPENDENCIES) libltdl/$(am__dirstamp)
+	$(libltdl_libltdl_la_LINK) $(am_libltdl_libltdl_la_rpath) $(libltdl_libltdl_la_OBJECTS) $(libltdl_libltdl_la_LIBADD) $(LIBS)
+libltdl/loaders/libltdl_libltdlc_la-preopen.lo:  \
+	libltdl/loaders/$(am__dirstamp) \
+	libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdlc_la-lt__alloc.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdlc_la-lt_dlloader.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdlc_la-lt_error.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdlc_la-ltdl.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdl_libltdlc_la-slist.lo: libltdl/$(am__dirstamp) \
+	libltdl/$(DEPDIR)/$(am__dirstamp)
+libltdl/libltdlc.la: $(libltdl_libltdlc_la_OBJECTS) $(libltdl_libltdlc_la_DEPENDENCIES) libltdl/$(am__dirstamp)
+	$(libltdl_libltdlc_la_LINK) $(am_libltdl_libltdlc_la_rpath) $(libltdl_libltdlc_la_OBJECTS) $(libltdl_libltdlc_la_LIBADD) $(LIBS)
+libltdl/loaders/load_add_on.lo: libltdl/loaders/$(am__dirstamp) \
+	libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+libltdl/load_add_on.la: $(libltdl_load_add_on_la_OBJECTS) $(libltdl_load_add_on_la_DEPENDENCIES) libltdl/$(am__dirstamp)
+	$(libltdl_load_add_on_la_LINK)  $(libltdl_load_add_on_la_OBJECTS) $(libltdl_load_add_on_la_LIBADD) $(LIBS)
+libltdl/loaders/loadlibrary.lo: libltdl/loaders/$(am__dirstamp) \
+	libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+libltdl/loadlibrary.la: $(libltdl_loadlibrary_la_OBJECTS) $(libltdl_loadlibrary_la_DEPENDENCIES) libltdl/$(am__dirstamp)
+	$(libltdl_loadlibrary_la_LINK)  $(libltdl_loadlibrary_la_OBJECTS) $(libltdl_loadlibrary_la_LIBADD) $(LIBS)
+libltdl/loaders/shl_load.lo: libltdl/loaders/$(am__dirstamp) \
+	libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+libltdl/shl_load.la: $(libltdl_shl_load_la_OBJECTS) $(libltdl_shl_load_la_DEPENDENCIES) libltdl/$(am__dirstamp)
+	$(libltdl_shl_load_la_LINK)  $(libltdl_shl_load_la_OBJECTS) $(libltdl_shl_load_la_LIBADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdl_la-lt__alloc.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdl_la-lt__alloc.lo
+	-rm -f libltdl/libltdl_libltdl_la-lt_dlloader.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdl_la-lt_dlloader.lo
+	-rm -f libltdl/libltdl_libltdl_la-lt_error.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdl_la-lt_error.lo
+	-rm -f libltdl/libltdl_libltdl_la-ltdl.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdl_la-ltdl.lo
+	-rm -f libltdl/libltdl_libltdl_la-slist.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdl_la-slist.lo
+	-rm -f libltdl/libltdl_libltdlc_la-lt__alloc.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdlc_la-lt__alloc.lo
+	-rm -f libltdl/libltdl_libltdlc_la-lt_dlloader.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdlc_la-lt_dlloader.lo
+	-rm -f libltdl/libltdl_libltdlc_la-lt_error.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdlc_la-lt_error.lo
+	-rm -f libltdl/libltdl_libltdlc_la-ltdl.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdlc_la-ltdl.lo
+	-rm -f libltdl/libltdl_libltdlc_la-slist.$(OBJEXT)
+	-rm -f libltdl/libltdl_libltdlc_la-slist.lo
+	-rm -f libltdl/loaders/dld_link.$(OBJEXT)
+	-rm -f libltdl/loaders/dld_link.lo
+	-rm -f libltdl/loaders/dlopen.$(OBJEXT)
+	-rm -f libltdl/loaders/dlopen.lo
+	-rm -f libltdl/loaders/dyld.$(OBJEXT)
+	-rm -f libltdl/loaders/dyld.lo
+	-rm -f libltdl/loaders/libltdl_libltdl_la-preopen.$(OBJEXT)
+	-rm -f libltdl/loaders/libltdl_libltdl_la-preopen.lo
+	-rm -f libltdl/loaders/libltdl_libltdlc_la-preopen.$(OBJEXT)
+	-rm -f libltdl/loaders/libltdl_libltdlc_la-preopen.lo
+	-rm -f libltdl/loaders/load_add_on.$(OBJEXT)
+	-rm -f libltdl/loaders/load_add_on.lo
+	-rm -f libltdl/loaders/loadlibrary.$(OBJEXT)
+	-rm -f libltdl/loaders/loadlibrary.lo
+	-rm -f libltdl/loaders/shl_load.$(OBJEXT)
+	-rm -f libltdl/loaders/shl_load.lo
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/argz.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdl_la-lt__alloc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdl_la-lt_dlloader.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdl_la-lt_error.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdl_la-ltdl.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdl_la-slist.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt__alloc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt_dlloader.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt_error.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdlc_la-ltdl.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/libltdl_libltdlc_la-slist.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/lt__dirent.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/$(DEPDIR)/lt__strl.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/loaders/$(DEPDIR)/dld_link.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/loaders/$(DEPDIR)/dlopen.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/loaders/$(DEPDIR)/dyld.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/loaders/$(DEPDIR)/libltdl_libltdl_la-preopen.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/loaders/$(DEPDIR)/libltdl_libltdlc_la-preopen.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/loaders/$(DEPDIR)/load_add_on.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/loaders/$(DEPDIR)/loadlibrary.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@libltdl/loaders/$(DEPDIR)/shl_load.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+
+libltdl/loaders/libltdl_libltdl_la-preopen.lo: libltdl/loaders/preopen.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/loaders/libltdl_libltdl_la-preopen.lo -MD -MP -MF libltdl/loaders/$(DEPDIR)/libltdl_libltdl_la-preopen.Tpo -c -o libltdl/loaders/libltdl_libltdl_la-preopen.lo `test -f 'libltdl/loaders/preopen.c' || echo '$(srcdir)/'`libltdl/loaders/preopen.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/loaders/$(DEPDIR)/libltdl_libltdl_la-preopen.Tpo libltdl/loaders/$(DEPDIR)/libltdl_libltdl_la-preopen.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/loaders/preopen.c' object='libltdl/loaders/libltdl_libltdl_la-preopen.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/loaders/libltdl_libltdl_la-preopen.lo `test -f 'libltdl/loaders/preopen.c' || echo '$(srcdir)/'`libltdl/loaders/preopen.c
+
+libltdl/libltdl_libltdl_la-lt__alloc.lo: libltdl/lt__alloc.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdl_la-lt__alloc.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdl_la-lt__alloc.Tpo -c -o libltdl/libltdl_libltdl_la-lt__alloc.lo `test -f 'libltdl/lt__alloc.c' || echo '$(srcdir)/'`libltdl/lt__alloc.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdl_la-lt__alloc.Tpo libltdl/$(DEPDIR)/libltdl_libltdl_la-lt__alloc.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/lt__alloc.c' object='libltdl/libltdl_libltdl_la-lt__alloc.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdl_la-lt__alloc.lo `test -f 'libltdl/lt__alloc.c' || echo '$(srcdir)/'`libltdl/lt__alloc.c
+
+libltdl/libltdl_libltdl_la-lt_dlloader.lo: libltdl/lt_dlloader.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdl_la-lt_dlloader.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdl_la-lt_dlloader.Tpo -c -o libltdl/libltdl_libltdl_la-lt_dlloader.lo `test -f 'libltdl/lt_dlloader.c' || echo '$(srcdir)/'`libltdl/lt_dlloader.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdl_la-lt_dlloader.Tpo libltdl/$(DEPDIR)/libltdl_libltdl_la-lt_dlloader.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/lt_dlloader.c' object='libltdl/libltdl_libltdl_la-lt_dlloader.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdl_la-lt_dlloader.lo `test -f 'libltdl/lt_dlloader.c' || echo '$(srcdir)/'`libltdl/lt_dlloader.c
+
+libltdl/libltdl_libltdl_la-lt_error.lo: libltdl/lt_error.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdl_la-lt_error.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdl_la-lt_error.Tpo -c -o libltdl/libltdl_libltdl_la-lt_error.lo `test -f 'libltdl/lt_error.c' || echo '$(srcdir)/'`libltdl/lt_error.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdl_la-lt_error.Tpo libltdl/$(DEPDIR)/libltdl_libltdl_la-lt_error.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/lt_error.c' object='libltdl/libltdl_libltdl_la-lt_error.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdl_la-lt_error.lo `test -f 'libltdl/lt_error.c' || echo '$(srcdir)/'`libltdl/lt_error.c
+
+libltdl/libltdl_libltdl_la-ltdl.lo: libltdl/ltdl.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdl_la-ltdl.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdl_la-ltdl.Tpo -c -o libltdl/libltdl_libltdl_la-ltdl.lo `test -f 'libltdl/ltdl.c' || echo '$(srcdir)/'`libltdl/ltdl.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdl_la-ltdl.Tpo libltdl/$(DEPDIR)/libltdl_libltdl_la-ltdl.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/ltdl.c' object='libltdl/libltdl_libltdl_la-ltdl.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdl_la-ltdl.lo `test -f 'libltdl/ltdl.c' || echo '$(srcdir)/'`libltdl/ltdl.c
+
+libltdl/libltdl_libltdl_la-slist.lo: libltdl/slist.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdl_la-slist.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdl_la-slist.Tpo -c -o libltdl/libltdl_libltdl_la-slist.lo `test -f 'libltdl/slist.c' || echo '$(srcdir)/'`libltdl/slist.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdl_la-slist.Tpo libltdl/$(DEPDIR)/libltdl_libltdl_la-slist.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/slist.c' object='libltdl/libltdl_libltdl_la-slist.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdl_la-slist.lo `test -f 'libltdl/slist.c' || echo '$(srcdir)/'`libltdl/slist.c
+
+libltdl/loaders/libltdl_libltdlc_la-preopen.lo: libltdl/loaders/preopen.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/loaders/libltdl_libltdlc_la-preopen.lo -MD -MP -MF libltdl/loaders/$(DEPDIR)/libltdl_libltdlc_la-preopen.Tpo -c -o libltdl/loaders/libltdl_libltdlc_la-preopen.lo `test -f 'libltdl/loaders/preopen.c' || echo '$(srcdir)/'`libltdl/loaders/preopen.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/loaders/$(DEPDIR)/libltdl_libltdlc_la-preopen.Tpo libltdl/loaders/$(DEPDIR)/libltdl_libltdlc_la-preopen.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/loaders/preopen.c' object='libltdl/loaders/libltdl_libltdlc_la-preopen.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/loaders/libltdl_libltdlc_la-preopen.lo `test -f 'libltdl/loaders/preopen.c' || echo '$(srcdir)/'`libltdl/loaders/preopen.c
+
+libltdl/libltdl_libltdlc_la-lt__alloc.lo: libltdl/lt__alloc.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdlc_la-lt__alloc.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt__alloc.Tpo -c -o libltdl/libltdl_libltdlc_la-lt__alloc.lo `test -f 'libltdl/lt__alloc.c' || echo '$(srcdir)/'`libltdl/lt__alloc.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt__alloc.Tpo libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt__alloc.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/lt__alloc.c' object='libltdl/libltdl_libltdlc_la-lt__alloc.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdlc_la-lt__alloc.lo `test -f 'libltdl/lt__alloc.c' || echo '$(srcdir)/'`libltdl/lt__alloc.c
+
+libltdl/libltdl_libltdlc_la-lt_dlloader.lo: libltdl/lt_dlloader.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdlc_la-lt_dlloader.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt_dlloader.Tpo -c -o libltdl/libltdl_libltdlc_la-lt_dlloader.lo `test -f 'libltdl/lt_dlloader.c' || echo '$(srcdir)/'`libltdl/lt_dlloader.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt_dlloader.Tpo libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt_dlloader.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/lt_dlloader.c' object='libltdl/libltdl_libltdlc_la-lt_dlloader.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdlc_la-lt_dlloader.lo `test -f 'libltdl/lt_dlloader.c' || echo '$(srcdir)/'`libltdl/lt_dlloader.c
+
+libltdl/libltdl_libltdlc_la-lt_error.lo: libltdl/lt_error.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdlc_la-lt_error.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt_error.Tpo -c -o libltdl/libltdl_libltdlc_la-lt_error.lo `test -f 'libltdl/lt_error.c' || echo '$(srcdir)/'`libltdl/lt_error.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt_error.Tpo libltdl/$(DEPDIR)/libltdl_libltdlc_la-lt_error.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/lt_error.c' object='libltdl/libltdl_libltdlc_la-lt_error.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdlc_la-lt_error.lo `test -f 'libltdl/lt_error.c' || echo '$(srcdir)/'`libltdl/lt_error.c
+
+libltdl/libltdl_libltdlc_la-ltdl.lo: libltdl/ltdl.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdlc_la-ltdl.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdlc_la-ltdl.Tpo -c -o libltdl/libltdl_libltdlc_la-ltdl.lo `test -f 'libltdl/ltdl.c' || echo '$(srcdir)/'`libltdl/ltdl.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdlc_la-ltdl.Tpo libltdl/$(DEPDIR)/libltdl_libltdlc_la-ltdl.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/ltdl.c' object='libltdl/libltdl_libltdlc_la-ltdl.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdlc_la-ltdl.lo `test -f 'libltdl/ltdl.c' || echo '$(srcdir)/'`libltdl/ltdl.c
+
+libltdl/libltdl_libltdlc_la-slist.lo: libltdl/slist.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl/libltdl_libltdlc_la-slist.lo -MD -MP -MF libltdl/$(DEPDIR)/libltdl_libltdlc_la-slist.Tpo -c -o libltdl/libltdl_libltdlc_la-slist.lo `test -f 'libltdl/slist.c' || echo '$(srcdir)/'`libltdl/slist.c
+@am__fastdepCC_TRUE@	$(am__mv) libltdl/$(DEPDIR)/libltdl_libltdlc_la-slist.Tpo libltdl/$(DEPDIR)/libltdl_libltdlc_la-slist.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='libltdl/slist.c' object='libltdl/libltdl_libltdlc_la-slist.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl/libltdl_libltdlc_la-slist.lo `test -f 'libltdl/slist.c' || echo '$(srcdir)/'`libltdl/slist.c
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+	-rm -rf libltdl/.libs libltdl/_libs
+	-rm -rf libltdl/loaders/.libs libltdl/loaders/_libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+doc/$(am__dirstamp):
+	@$(MKDIR_P) doc
+	@: > doc/$(am__dirstamp)
+
+$(srcdir)/doc/libtool.info: doc/libtool.texi $(srcdir)/doc/version.texi $(doc_libtool_TEXINFOS)
+	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
+	rm -rf $$backupdir && mkdir $$backupdir && \
+	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+	  done; \
+	else :; fi && \
+	cd "$$am__cwd"; \
+	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
+	 -o $@ $(srcdir)/doc/libtool.texi; \
+	then \
+	  rc=0; \
+	  $(am__cd) $(srcdir); \
+	else \
+	  rc=$$?; \
+	  $(am__cd) $(srcdir) && \
+	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+	fi; \
+	rm -rf $$backupdir; exit $$rc
+
+doc/libtool.dvi: doc/libtool.texi $(srcdir)/doc/version.texi $(doc_libtool_TEXINFOS) doc/$(am__dirstamp)
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
+	$(TEXI2DVI) -o $@ `test -f 'doc/libtool.texi' || echo '$(srcdir)/'`doc/libtool.texi
+
+doc/libtool.pdf: doc/libtool.texi $(srcdir)/doc/version.texi $(doc_libtool_TEXINFOS) doc/$(am__dirstamp)
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
+	$(TEXI2PDF) -o $@ `test -f 'doc/libtool.texi' || echo '$(srcdir)/'`doc/libtool.texi
+
+doc/libtool.html: doc/libtool.texi $(srcdir)/doc/version.texi $(doc_libtool_TEXINFOS) doc/$(am__dirstamp)
+	rm -rf $(@:.html=.htp)
+	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
+	 -o $(@:.html=.htp) `test -f 'doc/libtool.texi' || echo '$(srcdir)/'`doc/libtool.texi; \
+	then \
+	  rm -rf $@; \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
+	else \
+	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
+	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
+	  exit 1; \
+	fi
+$(srcdir)/doc/version.texi:  $(srcdir)/doc/stamp-vti
+$(srcdir)/doc/stamp-vti: doc/libtool.texi $(top_srcdir)/configure
+	test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
+	@(dir=.; test -f ./doc/libtool.texi || dir=$(srcdir); \
+	set `$(SHELL) $(top_srcdir)/libltdl/config/mdate-sh $$dir/doc/libtool.texi`; \
+	echo "@set UPDATED $$1 $$2 $$3"; \
+	echo "@set UPDATED-MONTH $$2 $$3"; \
+	echo "@set EDITION $(VERSION)"; \
+	echo "@set VERSION $(VERSION)") > vti.tmp
+	@cmp -s vti.tmp $(srcdir)/doc/version.texi \
+	  || (echo "Updating $(srcdir)/doc/version.texi"; \
+	      cp vti.tmp $(srcdir)/doc/version.texi)
+	-@rm -f vti.tmp
+	@cp $(srcdir)/doc/version.texi $@
+
+mostlyclean-vti:
+	-rm -f vti.tmp
+
+maintainer-clean-vti:
+	-rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi
+.dvi.ps:
+	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	$(DVIPS) -o $@ $<
+
+uninstall-dvi-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+	done
+
+uninstall-html-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+	done
+
+uninstall-info-am:
+	@$(PRE_UNINSTALL)
+	@if test -d '$(DESTDIR)$(infodir)' && \
+	    (install-info --version && \
+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+	  list='$(INFO_DEPS)'; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+	  done; \
+	else :; fi
+	@$(NORMAL_UNINSTALL)
+	@list='$(INFO_DEPS)'; \
+	for file in $$list; do \
+	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+	   else :; fi); \
+	done
+
+uninstall-pdf-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+	done
+
+uninstall-ps-am:
+	@$(NORMAL_UNINSTALL)
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
+	done
+
+dist-info: $(INFO_DEPS)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; \
+	for base in $$list; do \
+	  case $$base in \
+	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
+	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+	    if test -f $$file; then \
+	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+	      test -f "$(distdir)/$$relfile" || \
+		cp -p $$file "$(distdir)/$$relfile"; \
+	    else :; fi; \
+	  done; \
+	done
+
+mostlyclean-aminfo:
+	-rm -rf libtool.aux libtool.cp libtool.cps libtool.fn libtool.ky \
+	  libtool.kys libtool.log libtool.pg libtool.tmp libtool.toc \
+	  libtool.tp libtool.vr
+
+clean-aminfo:
+	-test -z "doc/libtool.dvi doc/libtool.pdf doc/libtool.ps doc/libtool.html" \
+	|| rm -rf doc/libtool.dvi doc/libtool.pdf doc/libtool.ps doc/libtool.html
+
+maintainer-clean-aminfo:
+	@list='$(INFO_DEPS)'; for i in $$list; do \
+	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+	done
+install-man1: $(dist_man1_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+	@list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_man1_MANS)'; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	test -z "$$files" || { \
+	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(includedir)" && rm -f $$files
+install-ltdlincludeHEADERS: $(ltdlinclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(ltdlincludedir)" || $(MKDIR_P) "$(DESTDIR)$(ltdlincludedir)"
+	@list='$(ltdlinclude_HEADERS)'; test -n "$(ltdlincludedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(ltdlincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(ltdlincludedir)" || exit $$?; \
+	done
+
+uninstall-ltdlincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(ltdlinclude_HEADERS)'; test -n "$(ltdlincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(ltdlincludedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(ltdlincludedir)" && rm -f $$files
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config-h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) config-h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config-h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS) config-h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+# To be appended to the command running the test.  Handle the stdout
+# and stderr redirection, and catch the exit status.
+am__check_post =					\
+>$@-t 2>&1;						\
+estatus=$$?;						\
+if test -n '$(DISABLE_HARD_ERRORS)'			\
+   && test $$estatus -eq 99; then			\
+  estatus=1;						\
+fi;							\
+TERM=$$__SAVED_TERM; export TERM;			\
+$(am__tty_colors);					\
+xfailed=PASS;						\
+case " $(XFAIL_TESTS) " in				\
+  *[\ \	]$$f[\ \	]* | *[\ \	]$$dir$$f[\ \	]*) \
+    xfailed=XFAIL;;					\
+esac;							\
+case $$estatus:$$xfailed in				\
+    0:XFAIL) col=$$red; res=XPASS;;			\
+    0:*)     col=$$grn; res=PASS ;;			\
+    77:*)    col=$$blu; res=SKIP ;;			\
+    99:*)    col=$$red; res=FAIL ;;			\
+    *:XFAIL) col=$$lgn; res=XFAIL;;			\
+    *:*)     col=$$red; res=FAIL ;;			\
+esac;							\
+echo "$${col}$$res$${std}: $$f";			\
+echo "$$res: $$f (exit: $$estatus)" |			\
+  $(am__rst_section) >$@;				\
+cat $@-t >>$@;						\
+rm -f $@-t
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+	@$(am__sh_e_setup);						\
+	list='$(TEST_LOGS)';						\
+	results=`for f in $$list; do					\
+		   read line < $$f && echo "$$line" || echo FAIL;	\
+		 done`;							\
+	all=`echo "$$results" | sed '/^$$/d' | wc -l | sed -e 's/^[	 ]*//'`; \
+	fail=`echo "$$results" | grep -c '^FAIL'`;			\
+	pass=`echo "$$results" | grep -c '^PASS'`;			\
+	skip=`echo "$$results" | grep -c '^SKIP'`;			\
+	xfail=`echo "$$results" | grep -c '^XFAIL'`;			\
+	xpass=`echo "$$results" | grep -c '^XPASS'`;			\
+	failures=`expr $$fail + $$xpass`;				\
+	all=`expr $$all - $$skip`;					\
+	if test "$$all" -eq 1; then tests=test; All=;			\
+	else tests=tests; All="All "; fi;				\
+	case fail=$$fail:xpass=$$xpass:xfail=$$xfail in			\
+	  fail=0:xpass=0:xfail=0)					\
+	    msg="$$All$$all $$tests passed.  ";				\
+	    exit=true;;							\
+	  fail=0:xpass=0:xfail=*)					\
+	    msg="$$All$$all $$tests behaved as expected";		\
+	    if test "$$xfail" -eq 1; then xfailures=failure;		\
+	    else xfailures=failures; fi;				\
+	    msg="$$msg ($$xfail expected $$xfailures).  ";		\
+	    exit=true;;							\
+	  fail=*:xpass=0:xfail=*)					\
+	    msg="$$fail of $$all $$tests failed.  ";			\
+	    exit=false;;						\
+	  fail=*:xpass=*:xfail=*)					\
+	    msg="$$failures of $$all $$tests did not behave as expected"; \
+	    if test "$$xpass" -eq 1; then xpasses=pass;			\
+	    else xpasses=passes; fi;					\
+	    msg="$$msg ($$xpass unexpected $$xpasses).  ";		\
+	    exit=false;;						\
+	  *)								\
+	    echo >&2 "incorrect case"; exit 4;;				\
+	esac;								\
+	if test "$$skip" -ne 0; then					\
+	  if test "$$skip" -eq 1; then					\
+	    msg="$$msg($$skip test was not run).  ";			\
+	  else								\
+	    msg="$$msg($$skip tests were not run).  ";			\
+	  fi;								\
+	fi;								\
+	{								\
+	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
+	    $(am__rst_title);						\
+	  echo "$$msg";							\
+	  echo;								\
+	  echo ".. contents:: :depth: 2";				\
+	  echo;								\
+	  for f in $$list; do						\
+	    read line < $$f;						\
+	    case $$line in						\
+	      PASS:*|XFAIL:*);;						\
+	      *) echo; cat $$f;;					\
+	    esac;							\
+	  done;								\
+	} >$(TEST_SUITE_LOG).tmp;					\
+	mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG);			\
+	if test "$$failures" -ne 0; then				\
+	  msg="$${msg}See $(subdir)/$(TEST_SUITE_LOG).  ";		\
+	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
+	    msg="$${msg}Please report to $(PACKAGE_BUGREPORT).  ";	\
+	  fi;								\
+	fi;								\
+	test x"$$VERBOSE" = x || $$exit || cat $(TEST_SUITE_LOG);	\
+	$(am__tty_colors);						\
+	if $$exit; then							\
+	  echo $(ECHO_N) "$$grn$(ECHO_C)";				\
+	 else								\
+	  echo $(ECHO_N) "$$red$(ECHO_C)";				\
+	fi;								\
+	echo "$$msg" | $(am__text_box);					\
+	echo $(ECHO_N) "$$std$(ECHO_C)";				\
+	$$exit
+
+# Run all the tests.
+check-TESTS:
+	@list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
+	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@list='$(TEST_LOGS)';						\
+	list=`for f in $$list; do					\
+	  test .log = $$f || echo $$f;					\
+	done | tr '\012\015' '  '`;					\
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$list"
+
+.log.html:
+	@list='$(RST2HTML) $$RST2HTML rst2html rst2html.py';		\
+	for r2h in $$list; do						\
+	  if ($$r2h --version) >/dev/null 2>&1; then			\
+	    R2H=$$r2h;							\
+	  fi;								\
+	done;								\
+	if test -z "$$R2H"; then					\
+	  echo >&2 "cannot find rst2html, cannot create $@";		\
+	  exit 2;							\
+	fi;								\
+	$$R2H $< >$@.tmp
+	@mv $@.tmp $@
+
+# Be sure to run check first, and then to convert the result.
+# Beware of concurrent executions.  Run "check" not "check-TESTS", as
+# check-SCRIPTS and other dependencies are rebuilt by the former only.
+# And expect check to fail.
+check-html:
+	@if $(MAKE) $(AM_MAKEFLAGS) check; then			\
+	  rv=0; else rv=$$?;					\
+	fi;							\
+	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_HTML) || exit 4;	\
+	exit $$rv
+recheck recheck-html:
+	@target=`echo $@ | sed 's,^re,,'`;				\
+	list='$(TEST_LOGS)';						\
+	list=`for f in $$list; do					\
+	        test -f $$f || continue;				\
+	        if read line < $$f; then				\
+	          case $$line in FAIL*|XPASS*) echo $$f;; esac;		\
+	        else echo $$f; fi;					\
+	      done | tr '\012\015' '  '`;				\
+	$(MAKE) $(AM_MAKEFLAGS) $$target AM_MAKEFLAGS='$(AM_MAKEFLAGS) TEST_LOGS="'"$$list"'"'
+.test.log:
+	@p='$<'; $(am__check_pre) $(TEST_LOG_COMPILE) "$$tst" $(am__check_post)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@	@p='$<'; $(am__check_pre) $(TEST_LOG_COMPILE) "$$tst" $(am__check_post)
+
+distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-info dist-hook
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS check-local
+check: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) check-recursive
+all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) $(SCRIPTS) $(MANS) \
+		$(HEADERS) config.h all-local
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(ltdlincludedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+	-test -z "$(LIBOBJS)" || rm -f $(LIBOBJS)
+	-test -z "$(LTLIBOBJS)" || rm -f $(LTLIBOBJS)
+	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+	-test -z "$(TEST_LOGS_TMP)" || rm -f $(TEST_LOGS_TMP)
+	-test -z "$(TEST_SUITE_HTML)" || rm -f $(TEST_SUITE_HTML)
+	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-rm -f doc/$(am__dirstamp)
+	-rm -f libltdl/$(DEPDIR)/$(am__dirstamp)
+	-rm -f libltdl/$(am__dirstamp)
+	-rm -f libltdl/loaders/$(DEPDIR)/$(am__dirstamp)
+	-rm -f libltdl/loaders/$(am__dirstamp)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+clean: clean-recursive
+
+clean-am: clean-aminfo clean-generic clean-libLTLIBRARIES \
+	clean-libtool clean-local clean-noinstLTLIBRARIES \
+	mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf libltdl/$(DEPDIR) libltdl/loaders/$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am: $(DVIS)
+
+html: html-recursive
+
+html-am: $(HTMLS)
+
+info: info-recursive
+
+info-am: $(INFO_DEPS)
+
+install-data-am: install-data-local install-includeHEADERS \
+	install-info-am install-ltdlincludeHEADERS install-man
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am: $(DVIS)
+	@$(NORMAL_INSTALL)
+	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
+	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+	done
+install-exec-am: install-binSCRIPTS install-libLTLIBRARIES
+
+install-html: install-html-recursive
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d$$p"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
+install-info: install-info-recursive
+
+install-info-am: $(INFO_DEPS)
+	@$(NORMAL_INSTALL)
+	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	  esac; \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+	    if test -f $$ifile; then \
+	      echo "$$ifile"; \
+	    else : ; fi; \
+	  done; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+	@$(POST_INSTALL)
+	@if (install-info --version && \
+	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
+	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+	  for file in $$list; do \
+	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
+	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+	  done; \
+	else : ; fi
+install-man: install-man1
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
+install-ps: install-ps-recursive
+
+install-ps-am: $(PSS)
+	@$(NORMAL_INSTALL)
+	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
+	@list='$(PSS)'; test -n "$(psdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
+installcheck-am: installcheck-local
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf libltdl/$(DEPDIR) libltdl/loaders/$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+	maintainer-clean-generic maintainer-clean-vti
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool mostlyclean-vti
+
+pdf: pdf-recursive
+
+pdf-am: $(PDFS)
+
+ps: ps-recursive
+
+ps-am: $(PSS)
+
+uninstall-am: uninstall-binSCRIPTS uninstall-dvi-am uninstall-html-am \
+	uninstall-includeHEADERS uninstall-info-am \
+	uninstall-libLTLIBRARIES uninstall-ltdlincludeHEADERS \
+	uninstall-man uninstall-pdf-am uninstall-ps-am
+	@$(NORMAL_INSTALL)
+	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
+uninstall-man: uninstall-man1
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
+	check-am check-html ctags-recursive install install-am \
+	install-strip recheck recheck-html tags-recursive uninstall-am
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am all-local am--refresh check check-TESTS check-am \
+	check-html check-local clean clean-aminfo clean-generic \
+	clean-libLTLIBRARIES clean-libtool clean-local \
+	clean-noinstLTLIBRARIES ctags ctags-recursive dist dist-all \
+	dist-bzip2 dist-gzip dist-hook dist-info dist-lzma dist-shar \
+	dist-tarZ dist-xz dist-zip distcheck distclean \
+	distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-binSCRIPTS install-data \
+	install-data-am install-data-local install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-includeHEADERS install-info install-info-am \
+	install-libLTLIBRARIES install-ltdlincludeHEADERS install-man \
+	install-man1 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installcheck-local installdirs installdirs-am maintainer-clean \
+	maintainer-clean-aminfo maintainer-clean-generic \
+	maintainer-clean-vti mostlyclean mostlyclean-aminfo \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	mostlyclean-vti pdf pdf-am ps ps-am recheck recheck-html tags \
+	tags-recursive uninstall uninstall-am uninstall-binSCRIPTS \
+	uninstall-dvi-am uninstall-hook uninstall-html-am \
+	uninstall-includeHEADERS uninstall-info-am \
+	uninstall-libLTLIBRARIES uninstall-ltdlincludeHEADERS \
+	uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am
+
+$(srcdir)/$(m4dir)/ltversion.m4: $(m4dir)/ltversion.in configure.ac ChangeLog
+	@target='$(srcdir)/$(m4dir)/ltversion.m4'; $(rebuild); \
+	if test -f "$$target"; then \
+	  set dummy `sed -n '/^# serial /p' "$$target"`; shift; \
+	  actualver=1.$$3; \
+	  test "$$actualver" = "$$correctver" && rebuild=false; \
+	fi; \
+	for prereq in $?; do \
+	  case $$prereq in *ChangeLog | *configure.ac);; *) rebuild=:;; esac; \
+	done; \
+	if $$rebuild; then \
+	  cd $(srcdir); \
+	  rm -f $(m4dir)/ltversion.tmp; \
+	  serial=`echo "$$correctver" | sed 's,^1[.],,g'`; \
+	  echo $(bootstrap_edit) \
+	    $(srcdir)/$(m4dir)/ltversion.in \> $(srcdir)/$(m4dir)/ltversion.m4; \
+	  $(bootstrap_edit) \
+		  $(m4dir)/ltversion.in > $(m4dir)/ltversion.tmp; \
+	  chmod a-w $(m4dir)/ltversion.tmp; \
+	  mv -f $(m4dir)/ltversion.tmp $(m4dir)/ltversion.m4; \
+	fi
+$(srcdir)/$(auxdir)/ltmain.sh: $(sh_files) $(auxdir)/ltmain.m4sh configure.ac ChangeLog
+	@target='$(srcdir)/$(auxdir)/ltmain.sh'; $(rebuild); \
+	if test -f "$$target"; then \
+	  eval `sed -n '/^package_revision=/p' "$$target"`; \
+	  actualver=$$package_revision; \
+	  test "$$actualver" = "$$correctver" && rebuild=false; \
+	fi; \
+	for prereq in $?; do \
+	  case $$prereq in *ChangeLog);; *) rebuild=:;; esac; \
+	done; \
+	if $$rebuild; then \
+	  cd $(srcdir); \
+	  rm -f $(auxdir)/ltmain.in $(auxdir)/ltmain.tmp \
+	    $(auxdir)/ltmain.sh; \
+	  echo $(M4SH) -B $(auxdir) $(auxdir)/ltmain.m4sh \
+	    \> $(auxdir)/ltmain.in; \
+	  $(M4SH) -B $(auxdir) $(auxdir)/ltmain.m4sh \
+	    > $(auxdir)/ltmain.in; \
+	  echo $(bootstrap_edit) \
+	    $(srcdir)/$(auxdir)/ltmain.in "> $$target"; \
+	  $(bootstrap_edit) -e '/^: \$${.*="@.*@"}$$/d' \
+	    $(auxdir)/ltmain.in > $(auxdir)/ltmain.tmp; \
+	  rm -f $(auxdir)/ltmain.in; \
+	  chmod a-w $(auxdir)/ltmain.tmp; \
+	  mv -f $(auxdir)/ltmain.tmp $(auxdir)/ltmain.sh; \
+	fi
+$(srcdir)/libtoolize.in: $(sh_files) libtoolize.m4sh Makefile.am
+	cd $(srcdir); \
+	rm -f libtoolize.in libtoolize.tmp; \
+	$(M4SH) -B $(auxdir) libtoolize.m4sh > libtoolize.tmp; \
+	$(bootstrap_edit) libtoolize.tmp > libtoolize.in; \
+	rm -f libtoolize.tmp
+
+$(srcdir)/libltdl/Makefile.am: $(srcdir)/libltdl/Makefile.inc
+	cd $(srcdir); \
+	in=libltdl/Makefile.inc; out=libltdl/Makefile.am; \
+	rm -f $$out; \
+	( $(SED) -n '1,/^.. DO NOT REMOVE THIS LINE -- /p' $$in; \
+	{ echo 'ACLOCAL_AMFLAGS = -I m4'; \
+	  echo 'AUTOMAKE_OPTIONS = foreign'; \
+	  echo 'AM_CPPFLAGS ='; \
+	  echo 'AM_LDFLAGS ='; \
+	  echo 'BUILT_SOURCES ='; \
+	  echo 'include_HEADERS ='; \
+	  echo 'noinst_LTLIBRARIES ='; \
+	  echo 'lib_LTLIBRARIES ='; \
+	  echo 'EXTRA_LTLIBRARIES ='; \
+	  echo 'EXTRA_DIST ='; \
+	  echo 'CLEANFILES ='; \
+	  echo 'MOSTLYCLEANFILES ='; \
+	}; \
+	$(SED) -n '/^.. DO NOT REMOVE THIS LINE -- /,$$p' $$in | \
+	$(SED) -e 's,libltdl_,,; s,libltdl/,,; s,: libltdl/,: ,' \
+	       -e 's,\$$(libltdl_,$$(,' \
+	) | \
+	$(SED) -e '/^.. DO NOT REMOVE THIS LINE -- /d' \
+	       -e '1s,^\(.. Makefile.\)inc.*,\1am -- Process this file with automake to produce Makefile.in,' > $$out;
+	chmod a-w $(srcdir)/libltdl/Makefile.am
+
+all-local: $(LTDL_BOOTSTRAP_DEPS)
+
+libtoolize: $(srcdir)/libtoolize.in $(top_builddir)/config.status
+	rm -f libtoolize.tmp libtoolize
+	$(configure_edit) \
+		$(srcdir)/libtoolize.in > libtoolize.tmp
+	chmod a+x libtoolize.tmp
+	chmod a-w libtoolize.tmp
+	mv -f libtoolize.tmp libtoolize
+
+# We used to do this with a 'stamp-vcl' file, but non-gmake builds
+# would rerun configure on every invocation, so now we manually
+# check the version numbers from the build rule when necessary.
+libtool: $(top_builddir)/config.status $(srcdir)/$(auxdir)/ltmain.sh ChangeLog
+	@target=libtool; $(rebuild); \
+	if test -f "$$target"; then \
+	  set dummy `./$$target --version | sed 1q`; actualver="$$5"; \
+	  test "$$actualver" = "$$correctver" && rebuild=false; \
+	fi; \
+	for prereq in $?; do \
+	  case $$prereq in *ChangeLog);; *) rebuild=:;; esac; \
+	done; \
+	if $$rebuild; then \
+	  echo $(SHELL) ./config.status $$target; \
+	  cd $(top_builddir) && $(SHELL) ./config.status $$target; \
+	fi
+
+.PHONY: configure-subdirs
+configure-subdirs distdir: $(DIST_MAKEFILE_LIST)
+@DIST_MAKEFILE_LIST@:
+	dir=`echo $@ | sed 's,^[^/]*$$,.,;s,/[^/]*$$,,'`; \
+	test -d $$dir || mkdir $$dir || exit 1; \
+	abs_srcdir=`$(lt__cd) $(srcdir) && pwd`; \
+	(cd $$dir && $$abs_srcdir/$$dir/configure --with-dist) || exit 1
+
+# We need the following in order to create an <argz.h> when the system
+# doesn't have one that works with the given compiler.
+all-local $(lib_OBJECTS): libltdl/$(ARGZ_H)
+libltdl/argz.h: libltdl/argz_.h
+	$(mkinstalldirs) . libltdl/
+	cp $(srcdir)/libltdl/argz_.h $@-t
+	mv $@-t $@
+
+$(srcdir)/libltdl/Makefile.in: $(srcdir)/libltdl/Makefile.am \
+	    $(srcdir)/libltdl/aclocal.m4 
+	cd $(srcdir)/libltdl && $(AUTOMAKE) Makefile
+
+$(srcdir)/libltdl/stamp-mk: $(srcdir)/libltdl/Makefile.in
+	cd $(srcdir)/libltdl && \
+	sed -e 's,config/mdate-sh,,' -e 's,config/texinfo.tex,,' \
+	    -e 's,config/mkinstalldirs,,' \
+	    < Makefile.in > Makefile.inT && \
+	mv -f Makefile.inT Makefile.in
+	echo stamp > $@
+
+$(srcdir)/libltdl/aclocal.m4: $(sub_aclocal_m4_deps)
+	cd $(srcdir)/libltdl && $(ACLOCAL) -I m4
+
+$(srcdir)/libltdl/configure: $(sub_configure_deps)
+	cd $(srcdir)/libltdl && $(AUTOCONF)
+
+$(srcdir)/libltdl/config-h.in: $(sub_configure_deps)
+	cd $(srcdir)/libltdl && $(AUTOHEADER)
+	touch $@
+
+all-local: $(srcdir)/doc/notes.txt
+
+$(srcdir)/doc/notes.txt: $(srcdir)/doc/notes.texi
+	cd $(srcdir)/doc && \
+	  $(MAKEINFO) --no-headers $(MAKEINFOFLAGS) -o notes.txt notes.texi
+$(srcdir)/doc/libtool.1: $(srcdir)/$(auxdir)/ltmain.sh
+	$(update_mans) --help-option=--help-all libtool
+$(srcdir)/doc/libtoolize.1: $(srcdir)/libtoolize.in
+	$(update_mans) libtoolize
+
+install-data-local: libltdl/Makefile.in
+	@$(NORMAL_INSTALL)
+	-rm -rf $(DESTDIR)$(pkgdatadir)/*
+	$(mkinstalldirs) $(DESTDIR)$(aclocaldir)
+	@list='$(aclocalfiles)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's|^.*/||'`; \
+	  echo " $(INSTALL_DATA) '$(srcdir)/$(m4dir)/$$f' '$(DESTDIR)$(aclocaldir)/$$f'"; \
+	  $(INSTALL_DATA) "$(srcdir)/$(m4dir)/$$f" "$(DESTDIR)$(aclocaldir)/$$f"; \
+	done
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/config
+	@list='$(auxexefiles)' && for p in $$list; do \
+	  echo " $(INSTALL_SCRIPT) '$(srcdir)/libltdl/$$p' '$(DESTDIR)$(pkgdatadir)/$$p'"; \
+	  $(INSTALL_SCRIPT) "$(srcdir)/libltdl/$$p" "$(DESTDIR)$(pkgdatadir)/$$p"; \
+	done
+	$(INSTALL_DATA) "$(srcdir)/libltdl/config/ltmain.sh" "$(DESTDIR)$(pkgdatadir)/config/ltmain.sh" 
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/libltdl
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/libltdl/libltdl
+	$(mkinstalldirs) $(DESTDIR)$(pkgdatadir)/libltdl/loaders
+	@list='$(ltdldatafiles)' && for p in $$list; do \
+	  echo " $(INSTALL_DATA) '$(srcdir)/$$p' '$(DESTDIR)$(pkgdatadir)/$$p'"; \
+	  $(INSTALL_DATA) "$(srcdir)/$$p" "$(DESTDIR)$(pkgdatadir)/$$p"; \
+	done
+	-chmod a+x $(DESTDIR)$(pkgdatadir)/libltdl/configure
+
+uninstall-hook:
+	@$(NORMAL_UNINSTALL)
+	@list='$(ltdldatafiles) $(auxfiles)'; for f in $$list; do \
+	  echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
+	done
+	@for p in $(aclocalfiles); do \
+	  f=`echo "$$p" | sed 's|^.*/||'`; \
+	  echo " rm -f '$(DESTDIR)$(aclocaldir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(aclocaldir)/$$f"; \
+	done
+
+dist-hook:
+	case $(VERSION) in \
+	  *[a-z]) $(SHELL) $(srcdir)/$(edit_readme_alpha) $(distdir)/README ;; \
+	esac
+	for macro in LT_INIT AC_PROG_LIBTOOL AM_PROG_LIBTOOL; do \
+	  if grep $$macro $(srcdir)/aclocal.m4 $(srcdir)/libltdl/aclocal.m4; then \
+	    echo "Bogus $$macro macro contents in an aclocal.m4 file." >&2; \
+	    exit 1; \
+	  else :; fi; \
+	done
+
+# Use `$(srcdir)' for the benefit of non-GNU makes: this is
+# how `testsuite' appears in our dependencies.
+$(srcdir)/$(TESTSUITE): $(srcdir)/tests/package.m4 $(TESTSUITE_AT) Makefile.am
+	cd $(srcdir)/tests && \
+	$(AUTOTEST) `echo $(TESTSUITE_AT) | sed 's,tests/,,g'` -o testsuite.tmp && \
+	mv -f testsuite.tmp testsuite
+
+$(srcdir)/tests/package.m4: $(srcdir)/configure.ac Makefile.am
+	{ \
+	  echo '# Signature of the current package.'; \
+	  echo 'm4_define([AT_PACKAGE_NAME],      [@PACKAGE_NAME@])'; \
+	  echo 'm4_define([AT_PACKAGE_TARNAME],   [@PACKAGE_TARNAME@])'; \
+	  echo 'm4_define([AT_PACKAGE_VERSION],   [@PACKAGE_VERSION@])'; \
+	  echo 'm4_define([AT_PACKAGE_STRING],    [@PACKAGE_STRING@])'; \
+	  echo 'm4_define([AT_PACKAGE_BUGREPORT], [@PACKAGE_BUGREPORT@])'; \
+	  echo 'm4_define([AT_PACKAGE_URL],       [@PACKAGE_URL@])'; \
+	} | $(bootstrap_edit) > $(srcdir)/tests/package.m4
+
+tests/atconfig: $(top_builddir)/config.status
+	$(SHELL) ./config.status tests/atconfig
+
+# Hook the test suite into the check rule
+check-local: $(testsuite_deps_uninstalled)
+	$(CD_TESTDIR); \
+	CONFIG_SHELL="$(SHELL)" $(SHELL) $$abs_srcdir/$(TESTSUITE) \
+	  $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) $(TESTSUITEFLAGS)
+
+# Run the test suite on the *installed* tree.
+installcheck-local: $(testsuite_deps)
+	$(CD_TESTDIR); \
+	CONFIG_SHELL="$(SHELL)" $(SHELL) $$abs_srcdir/$(TESTSUITE) \
+	  $(TESTS_ENVIRONMENT) $(INSTALLCHECK_ENVIRONMENT) $(TESTSUITEFLAGS) \
+	  AUTOTEST_PATH="$(exec_prefix)/bin"
+
+check-noninteractive-old:
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS TESTS='$(NONINTERACTIVE_TESTS)'
+check-interactive-old:
+	$(MAKE) $(AM_MAKEFLAGS) check-TESTS TESTS='$(INTERACTIVE_TESTS)'
+
+# Run only noninteractive parts of the new testsuite.
+check-noninteractive-new: $(testsuite_deps_uninstalled)
+	$(CD_TESTDIR); \
+	CONFIG_SHELL="$(SHELL)" $(SHELL) $$abs_srcdir/$(TESTSUITE) \
+	  $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) \
+	  -k !interactive INNER_TESTSUITEFLAGS=",!interactive" \
+	  $(TESTSUITEFLAGS)
+
+# Run only interactive parts of the new testsuite.
+check-interactive-new: $(testsuite_deps_uninstalled)
+	$(CD_TESTDIR); \
+	CONFIG_SHELL="$(SHELL)" $(SHELL) $$abs_srcdir/$(TESTSUITE) \
+	  $(TESTS_ENVIRONMENT) $(BUILDCHECK_ENVIRONMENT) \
+	  -k interactive -k recursive INNER_TESTSUITEFLAGS=",interactive" \
+	  $(TESTSUITEFLAGS)
+
+check-interactive: check-interactive-old check-interactive-new
+check-noninteractive: check-noninteractive-old check-noninteractive-new
+
+# We need to remove any file droppings left behind by testsuite
+clean-local: clean-local-legacy
+	-$(CD_TESTDIR); \
+	test -f $$abs_srcdir/$(TESTSUITE) && \
+	    $(SHELL) $$abs_srcdir/$(TESTSUITE) --clean
+
+tests/tagdemo-undef-exec.log:	tests/tagdemo-undef-make.log
+tests/tagdemo-undef-make.log:	tests/tagdemo-undef.log
+tests/tagdemo-undef.log:	tests/tagdemo-shared-exec.log
+tests/tagdemo-shared-exec.log:	tests/tagdemo-shared-make.log
+tests/tagdemo-shared-make.log:	tests/tagdemo-shared.log
+tests/tagdemo-shared.log:	tests/tagdemo-exec.log
+tests/tagdemo-exec.log:		tests/tagdemo-make.log
+tests/tagdemo-make.log:		tests/tagdemo-conf.log
+tests/tagdemo-conf.log:		tests/tagdemo-static-exec.log
+tests/tagdemo-static-exec.log:	tests/tagdemo-static-make.log
+tests/tagdemo-static-make.log:	tests/tagdemo-static.log
+
+tests/f77demo-shared-exec.log:	tests/f77demo-shared-make.log
+tests/f77demo-shared-make.log:	tests/f77demo-shared.log
+tests/f77demo-shared.log:	tests/f77demo-exec.log
+tests/f77demo-exec.log:		tests/f77demo-make.log
+tests/f77demo-make.log:		tests/f77demo-conf.log
+tests/f77demo-conf.log:		tests/f77demo-static-exec.log
+tests/f77demo-static-exec.log:	tests/f77demo-static-make.log
+tests/f77demo-static-make.log:	tests/f77demo-static.log
+
+tests/fcdemo-shared-exec.log:	tests/fcdemo-shared-make.log
+tests/fcdemo-shared-make.log:	tests/fcdemo-shared.log
+tests/fcdemo-shared.log:	tests/fcdemo-exec.log
+tests/fcdemo-exec.log:		tests/fcdemo-make.log
+tests/fcdemo-make.log:		tests/fcdemo-conf.log
+tests/fcdemo-conf.log:		tests/fcdemo-static-exec.log
+tests/fcdemo-static-exec.log:	tests/fcdemo-static-make.log
+tests/fcdemo-static-make.log:	tests/fcdemo-static.log
+
+tests/cdemo-undef-exec.log:	tests/cdemo-undef-make.log
+tests/cdemo-undef-make.log:	tests/cdemo-undef.log
+tests/cdemo-undef.log: @ORDER@	tests/cdemo-shared-exec.log
+tests/cdemo-shared-exec.log:	tests/cdemo-shared-make.log
+tests/cdemo-shared-make.log:	tests/cdemo-shared.log
+tests/cdemo-shared.log: @ORDER@	tests/cdemo-exec.log
+tests/cdemo-exec.log:		tests/cdemo-make.log
+tests/cdemo-make.log:		tests/cdemo-conf.log
+tests/cdemo-conf.log: @ORDER@	tests/cdemo-static-exec.log
+tests/cdemo-static-exec.log:	tests/cdemo-static-make.log
+tests/cdemo-static-make.log:	tests/cdemo-static.log
+
+tests/demo-shared-unst.log:	tests/demo-noinst-link.log
+tests/demo-noinst-link.log:	tests/demo-relink.log
+tests/demo-relink.log:		tests/demo-hardcode.log
+tests/demo-hardcode.log:	tests/demo-shared-inst.log
+tests/demo-shared-inst.log:	tests/demo-shared-exec.log
+tests/demo-shared-exec.log:	tests/demo-shared-make.log
+tests/demo-shared-make.log:	tests/demo-shared.log
+tests/demo-shared.log: @ORDER@	tests/demo-nopic-exec.log
+tests/demo-nopic-exec.log:	tests/demo-nopic-make.log
+tests/demo-nopic-make.log:	tests/demo-nopic.log
+tests/demo-nopic.log: @ORDER@	tests/demo-pic-exec.log
+tests/demo-pic-exec.log:	tests/demo-pic-make.log
+tests/demo-pic-make.log:	tests/demo-pic.log
+tests/demo-pic.log: @ORDER@	tests/demo-nofast-unst.log
+tests/demo-nofast-unst.log:	tests/demo-nofast-inst.log
+tests/demo-nofast-inst.log:	tests/demo-nofast-exec.log
+tests/demo-nofast-exec.log:	tests/demo-nofast-make.log
+tests/demo-nofast-make.log:	tests/demo-nofast.log
+tests/demo-nofast.log: @ORDER@	tests/demo-deplibs.log
+tests/demo-deplibs.log:		tests/demo-unst.log
+tests/demo-unst.log:		tests/demo-inst.log
+tests/demo-inst.log:		tests/demo-exec.log
+tests/demo-exec.log:		tests/demo-make.log
+tests/demo-make.log:		tests/demo-conf.log
+tests/demo-conf.log: @ORDER@	tests/demo-static-unst.log
+tests/demo-static-unst.log:	tests/demo-static-inst.log
+tests/demo-static-inst.log:	tests/demo-static-exec.log
+tests/demo-static-exec.log:	tests/demo-static-make.log
+tests/demo-static-make.log:	tests/demo-static.log
+
+tests/depdemo-shared-unst.log:	tests/depdemo-relink.log
+tests/depdemo-relink.log:	tests/depdemo-shared-inst.log
+tests/depdemo-shared-inst.log:	tests/depdemo-shared-exec.log
+tests/depdemo-shared-exec.log:	tests/depdemo-shared-make.log
+tests/depdemo-shared-make.log:	tests/depdemo-shared.log
+tests/depdemo-shared.log: @ORDER@ tests/depdemo-nofast-unst.log
+tests/depdemo-nofast-unst.log:	tests/depdemo-nofast-inst.log
+tests/depdemo-nofast-inst.log:	tests/depdemo-nofast-exec.log
+tests/depdemo-nofast-exec.log:	tests/depdemo-nofast-make.log
+tests/depdemo-nofast-make.log:	tests/depdemo-nofast.log
+tests/depdemo-nofast.log: @ORDER@ tests/depdemo-unst.log
+tests/depdemo-unst.log:		tests/depdemo-inst.log
+tests/depdemo-inst.log:		tests/depdemo-exec.log
+tests/depdemo-exec.log:		tests/depdemo-make.log
+tests/depdemo-make.log:		tests/depdemo-conf.log
+tests/depdemo-conf.log: @ORDER@	tests/depdemo-static-unst.log
+tests/depdemo-static-unst.log:	tests/depdemo-static-inst.log
+tests/depdemo-static-inst.log:	tests/depdemo-static-exec.log
+tests/depdemo-static-exec.log:	tests/depdemo-static-make.log
+tests/depdemo-static-make.log:	tests/depdemo-static.log
+
+tests/mdemo-shared-unst.log:	tests/mdemo-shared-inst.log
+tests/mdemo-shared-inst.log:	tests/mdemo-shared-exec.log
+tests/mdemo-shared-exec.log:	tests/mdemo-shared-make.log
+tests/mdemo-shared-make.log:	tests/mdemo-shared.log
+tests/mdemo-shared.log: @ORDER@	tests/mdemo-dryrun.log \
+				tests/mdemo2-exec.log
+
+tests/mdemo-dryrun.log:		tests/mdemo-unst.log
+tests/mdemo-unst.log:		tests/mdemo-inst.log
+tests/mdemo-inst.log:		tests/mdemo-exec.log
+tests/mdemo-exec.log:		tests/mdemo-make.log
+tests/mdemo-make.log:		tests/mdemo-conf.log
+tests/mdemo-conf.log: @ORDER@	tests/mdemo-static-unst.log
+tests/mdemo-static-unst.log:	tests/mdemo-static-inst.log
+tests/mdemo-static-inst.log:	tests/mdemo-static-exec.log
+tests/mdemo-static-exec.log:	tests/mdemo-static-make.log
+tests/mdemo-static-make.log:	tests/mdemo-static.log
+
+tests/mdemo2-exec.log:		tests/mdemo2-make.log
+tests/mdemo2-make.log:		tests/mdemo2-conf.log \
+				tests/mdemo-dryrun.log
+
+tests/pdemo-inst.log:		tests/pdemo-exec.log
+tests/pdemo-exec.log:		tests/pdemo-make.log
+tests/pdemo-make.log:		tests/pdemo-conf.log
+
+# The defs script shouldn't be recreated whenever the Makefile is
+# regenerated since the source tree can be read-only.
+check-recursive: tests/defs
+tests/defs: $(srcdir)/tests/defs.in
+	rm -f tests/defs.tmp tests/defs; \
+	$(configure_edit) $(srcdir)/tests/defs.in > tests/defs.tmp; \
+	mv -f tests/defs.tmp tests/defs
+
+# Use `$(srcdir)/tests' for the benefit of non-GNU makes: this is
+# how defs.in appears in our dependencies.
+$(srcdir)/tests/defs.in: $(auxdir)/general.m4sh tests/defs.m4sh Makefile.am
+	cd $(srcdir); \
+	rm -f tests/defs.in; \
+	$(M4SH) -B $(auxdir) tests/defs.m4sh > tests/defs.in
+
+# We need to remove any files that the above tests created.
+clean-local-legacy:
+	-for dir in $(CONF_SUBDIRS); do \
+	  if test -f $$dir/Makefile; then \
+	    (cd $$dir && $(MAKE) $(AM_MAKEFLAGS) distclean); \
+	  else :; fi; \
+	done
+	rm -rf _inst _inst-*
+$(distclean_recursive): fake-distclean-legacy
+.PHONY: fake-distclean-legacy
+fake-distclean-legacy:
+	-for dir in $(CONF_SUBDIRS); do \
+	  if test ! -f $$dir/Makefile; then \
+	    $(mkinstalldirs) $$dir; \
+	    echo 'distclean: ; rm -f Makefile' > $$dir/Makefile; \
+	  else :; fi; \
+	done
+
+$(TESTS): tests/defs
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/NEWS b/NEWS
new file mode 100644
index 0000000..dfe9d62
--- /dev/null
+++ b/NEWS
@@ -0,0 +1,980 @@
+NEWS - list of user-visible changes between releases of GNU Libtool
+
+New in 2.4.2 2011-10-17: git version 2.4.1a, Libtool team:
+
+* New features:
+
+  - The --with-pic configure option now supports a list of comma-separated
+    package names.  This can be used to build some static libraries with PIC
+    objects while building others with non-PIC objects.
+
+  - Initial support for Go, using the gccgo compiler.
+
+  - On Mac OS X .dylib is now tried as well as .so with
+    lt_dlopenext().
+
+* Bug fixes:
+
+  - The generic approximation of the command line length limit (when getconf is
+    not available) works again.  Regression introduced in v2.2.6-39-g9c3d4d8.
+  - The bug that leaked developer tool paths into the release tarballs
+    from ./bootstrap is fixed.
+  - Improved support for the Cuda Compiler Driver (nvcc) on Darwin.
+  - For GCC LTO support, the -fuse-linker-plugin switch is now also removed
+    when computing compiler postdeps.
+
+* Important incompatible changes:
+
+  - The undocumented hardcode_libdir_flag_spec_ld tag variable has been
+    removed in favor of using hardcode_libdir_flag_spec with $wl set to empty.
+
+* Changes in supported systems or compilers:
+
+  - Fixes for gfortran on Darwin, XL Fortran on GNU/Linux.
+  - Support for FreeBSD 1.x (outdated since 1994) has been removed.
+
+New in 2.4 2010-09-22: git version 2.2.11a, Libtool team:
+
+* New features:
+
+  - Sysroot support.  This allows you to build cross-compiled packages
+    with the same prefix that will be used on the destination machine,
+    and still find dependent libraries under the compiler's "sysroot".
+    Without sysroot support, paths internal to the build system may leak
+    into the product of the build.
+
+    Sysroot support is disabled unless the --with-sysroot configure
+    option is passed to configure, because .la files generated with
+    sysroot support will _not_ be usable in general with older Libtools.
+
+  - On non-cygwin Windows systems, we now lookup potential library
+    file names without regard to file name case.
+  - The old testsuite now uses the `parallel-tests' Automake test driver
+    now for more concurrency and better test logging.  For this, tests are
+    run in verbose mode by default now.
+
+* Important incompatible changes:
+
+  - Autoconf 2.62 and Automake 1.11.1 or newer are now required for
+    bootstrapping Libtool.  For using Libtool in your own projects,
+    Autoconf 2.59 and Automake 1.9.6 should still work.
+  - The fix_srcfile_path variable has been replaced by a more thorough
+    mechanism triggered by the to_tool_file_cmd variable.
+
+* Changes in supported systems or compilers:
+
+  - Initial support for the Microsoft C/C++ Compiler, with help from
+    the compile script in unreleased Automake 1.12. Override the manifest
+    tool used to embed the manifest resource through the environment
+    variable MANIFEST_TOOL. Please note that the import library naming
+    has changed (from foo-2.lib to foo.dll.lib) from when the code lived
+    in its own git branch.
+  - Initial support for the NAG Fortran compiler on GNU/Linux.
+
+* Bug fixes:
+
+  - The `check-interactive' and `check-noninteractive' convenience make
+    targets now also work for the old testsuite.
+  - Warnings from Autoconf v2.67-36-g1e604ec about incomplete programs
+    passed to AC_*_IFELSE tests have been fixed.
+  - On IRIX, the test for -Wl,-exported_symbol now also works with gfortran.
+
+New in 2.2.10 2010-06-10: git version 2.2.9a, Libtool team:
+
+* New features:
+
+  - On non-cygwin Windows systems, we no longer try to lookup the POSIX
+    format path recorded in $libdir of a pseudo-library when looking up
+    the location of the library with the native tools.
+
+New in 2.2.8 2010-06-05: git version 2.2.7c, Libtool team:
+
+* No new features:
+
+  - Bumped version number and promoted 2.2.7b release candidate to a full
+    stable release.
+
+New in 2.2.7b 2010-05-20: git version 2.2.7a, Libtool team:
+
+* New features:
+
+  - Libtool ships and installs man pages for libtool and libtoolize now.
+  - New libtool command line flag --help-all.
+  - New libtool command line flag --no-silent (with alternate spelling
+    --no-quiet). This flag (re)enables the default informational messages,
+    but has no effect on so-called "verbose" output messages.
+  - New libtool command line flag --no-verbose, which disables only
+    the extra "verbose" output messages and has no effect on the
+    default informational messages.
+  - New convenience make targets `check-noninteractive' to avoid long testsuite
+    runs on Windows with popup windows in the middle, and `check-interactive'
+    for the complement set of tests.
+  - New link mode flag -bindir to specify the location for installed PE DLLs.
+  - Wrapper scripts and wrapper executables for programs linked against
+    uninstalled shared libraries now support command-line options --lt-debug
+    and --lt-dump-script.
+
+* Important incompatible changes:
+
+  - The wrapper command line option support described above introduces the
+    following incompatibility: the wrapper will remove any command line
+    options that begin with '--lt-*' from the argument list before launching
+    (uninstalled) programs. Any '--lt-*' option on the command line not
+    recognized by the wrapper will result in an error.
+  - The type of the symbol lists variables (lt_*_LTX_preloaded_symbols) has
+    been fixed in the manual and in a couple of tests to match the actual
+    implementation.
+
+* Changes in supported systems or compilers:
+
+  - Improved support for 64bit Windows (mingw64).
+  - Improved support for cegcc (Windows CE/PocketPC).
+  - Support for GNU/kOpenSolaris (kopensolaris*-gnu).
+  - Initial support for compilers on BlueGene BG/P.
+  - Improved support for Atari FreeMiNT.
+  - With binutils 2.19.50+, shared libraries can be built on AIX.
+  - Initial support for the Cuda Compiler Driver on GNU/Linux.
+  - Support for Haiku (i586-pc-haiku).
+  - Initial support for GCC link-time optimization (LTO) flags.
+
+* Bug fixes:
+
+  - Fix 2.2.6 regression that prevented using the libltdl macros together
+    with Autoconf 2.59 (`possibly undefined macro: LT_LIBEXT').
+  - Fix 2.2.4 regression that caused arguments with special characters
+    to be mangled by the compile wrapper for uninstalled programs on MinGW.
+  - libtool command line flag --verbose now also enables explicit
+    verbose output, in addition to its previous behavior of (re)enabling
+    only the default informational output. See New Features, --no-silent.
+  - Link tests are guarded by cache variables so they can be avoided for
+    bootstrapping purposes (e.g., when link tests are not possible).
+  - Argument mangling of execute mode has been improved (i.e., lessened).
+  - Fix 2.1b regression that caused nm to not be the default name lister.
+    The regression affected mainly (arguably broken) cross compiles.
+  - Fix long standing bug that caused compiler checks for Fortran and
+    C++ compilers to run twice.
+  - Link mode works around a parallel build failure on Darwin 9.6.0 due
+    to the `ar' `flock'ing an archive upon extraction, by protecting the
+    extraction of convenience archives with a lock.
+  - The Libtool macro files do not contain instances of __oline__ any more,
+    easing merges for configure scripts that are added to version control.
+  - Fix ancient bug where "-Wc," was turned into "$wl" (typically "-Wl,")
+    when using the compiler driver to link programs. Now "-Wc," is stripped
+    just as it is when linking libraries through the compiler driver.
+  - Symbol versioning works with the GNU gold linker now.
+  - Fixes for detection of shared library dependencies on MinGW systems.
+  - Fixed Sun compiler detection on Solaris with sunCC, sunf77 etc. names.
+
+* Miscellaneous changes:
+
+  - The manual is distributed under the terms of the GNU FDL 1.3 now.
+
+New in 2.2.6 2008-09-05: git version 2.2.5a, Libtool team:
+
+* New features:
+
+  - New lt_dloadvise_preload() call to set a hint that only preloadeded
+    modules can be opened.
+  - libtoolize no longer removes config.guess and config.sub, even when
+    --install is passed.
+
+* Changes in supported systems or compilers:
+
+  - Fixes for ifort on Darwin, and newer Intel compilers (icc 10, ifort 9)
+    on GNU/Linux.
+  - Fixes for cwrapper (cygwin/mingw) under -stdc=c99.
+  - Support cross compile of MinGW with Wine.
+  - Initial support for cegcc (Windows CE/PocketPC) cross compilation.
+  - Initial support for lf95 (Lahey Fortran 8.1) on GNU/Linux.
+
+* Bug fixes:
+
+  - Several testsuite issues have been fixed, thanks to user feedback.
+
+  - Fix 2.2 regression that caused argz symbols to be exported from
+    libltdl unrenamed on systems that do not have working argz.
+
+  - Revert "lt_dlopen(NULL) works on AIX again.". It was not the
+    correct fix.
+
+  - Diagnose '-L' arguments correctly.
+
+  - Libtool no longer tries to open devices as files in execute mode.
+
+  - Libtool no longer removes *.gcno profile information from GCC.
+
+New in 2.2.4: 2008-05-04: git version 2.2.3a, Libtool team:
+
+* New features:
+
+  - New libtoolize option --no-warn, for users that want to continue to
+    use old libtool style without being nagged.
+  - Options --debug, --no-warn, --quiet and --verbose can be passed to
+    libtoolize through the environment variable LIBTOOLIZE_OPTIONS, for
+    cleaner interaction between the user and libtoolize when called by
+    autoreconf.
+
+* Bug fixes:
+
+  - The documentation for lt_dlopenadvise showed the wrong type for
+    the lt_dladvise parameter.
+  - The public declarations for lt_dlhandle and lt_dladvise are now
+    incomplete struct types rather than void*, which means that nearly
+    all casting is eliminated allowing the compiler to provide more
+    type checking.
+  - libtoolize no longer reports up-to-date files that it would have
+    copied, unless --force is passed.
+  - No longer reports that lt~obsolete.m4 needs to be added to aclocal.m4
+    when it is already there.
+  - When `aclocal' copied the libtool macros directly into `aclocal.m4'
+    (i.e. AC_CONFIG_MACRO_DIR is not being used), libtoolize no longer
+    reports that all macros need to be added to `aclocal.m4', and
+    diagnoses only the macro files that are missing or not up-to-date.
+  - libtoolize now advises use of AC_CONFIG_MACRO_DIR to keep matching
+    libtool macros in-tree where appropriate.
+  - libtoolize now advises use of `ACLOCAL_AMFLAGS = -I m4' (or
+    equivalent) where appropriate, and errors out when ACLOCAL_AMFLAGS
+    names a different directory to AC_CONFIG_MACRO_DIR.
+
+New in 2.2.2: 2008-04-01: CVS version 2.2.1a, Libtool team:
+
+* New features:
+
+  - In compile mode, compiler output occurs in the user locale.  This
+    feature has been present in 1.5.26 but not in 2.2.
+
+* Changes in supported systems or compilers:
+
+  - Initial shared library support for AmigaOS4 on powerpc.
+
+* Bug fixes:
+
+  - Fix 2.2 regression in libltdl that causes memory corruption upon
+    repeated `lt_dlinit(); lt_dlexit()'.
+  - Fix 2.2 regression in libltdl that skipped the dlopen loader if
+    the system also supports other loaders (e.g., Cygwin, HP-UX).
+  - Fix 2.2 regression in that `libtool --mode=execute CMD ARGS' does not
+    transform ARGS that do not look like shell or C wrappers of libtool
+    programs.
+  - Fix 2.2 regression that kept cross-compiling to w32 from working.
+  - Several testsuite issues have been fixed, thanks to user feedback.
+
+New in 2.2: 2008-03-01; CVS version 2.1c, Libtool team:
+
+* Bug fixes:
+
+  - argz.c, lt__dirent.c and lt__strl.c are correctly distributed with
+    parent projects using nonrecursive libltdl.
+  - libtoolize no longer tries to install libtool files when libltdl is
+    used in a non-autoconf parent package.
+  - Don't add the CXX tag to libtool when there is no C++ compiler, even
+    if AC_PROG_CXX sets a default g++ compiler where no such compiler
+    actually exists.
+  - make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+    works again.
+
+New in 2.1b: 2008-02-01; CVS version 2.1a, Libtool team:
+
+* Important incompatible changes and obsoleted features:
+
+  - Removed deprecated APIs from libltdl: lt_dlcaller_register,
+    lt_dlhandle_next, lt_dlhandle_find, lt_dlforeach, lt_dlmutex_register,
+    lt_dlmutex_lock, lt_dlmutex_unlock, lt_dlmutex_seterror,
+    lt_dlmutex_geterror, lt_dlmalloc, lt_dlrealloc, lt_dlfree.
+  - The Libtool and libltdl macros and the testsuite now assume a C89
+    environment, consequently do not test for headers such as string.h,
+    strings.h, memory.h any more.
+  - Fix regression in libltdl symbol exports on Cygwin. Side effect:
+    LT_GLOBAL_DATA and LT_SCOPE are now explicitly defined as
+    declspec(dllexport), bypassing auto-export logic on Cygwin.
+    This tracks existing behavior on MinGW.
+  - The libtool script has been optimized a bit for more modern shells.
+    This breaks use of the stdin file descriptor in libtool, and can
+    break if a different shell is used to execute the libtool script
+    than the one it was configured for.
+  - The macros AC_ENABLE_SHARED, AC_DISABLE_SHARED, AC_ENABLE_STATIC, and
+    AC_DISABLE_STATIC have been un-deprecated after deprecation in
+    1.9b.
+  - The macro LT_WITH_LTDL has been renamed to LTDL_INIT.
+  - Fixed a branch-1-5/HEAD regression to only link uninstalled libraries
+    statically with `-static'.  In order to compensate for this, there
+    is a new link flag `-static-libtool-libs' to provide the previous
+    `-static' semantics.
+
+* New features:
+
+  - Fix installation of libltdl so that it does not need Autoconf and
+    Automake installed, in order to be usable in another package.  This
+    lifts the restrictions introduced in 1.9b.
+  - Default convenience or installable libltdl builds can optionally
+    be declared using new `convenience' or `installable' options to the
+    LTDL_INIT macro (as an alternative to individual LTDL_CONVENIENCE
+    or LTDL_INSTALLABLE invocations).
+  - New configure-time options to allow libltdl parent project builder
+    to choose between installed and shipped libltdl, when invoking
+    LTDL_INIT: --with-included-ltdl, --with-ltdl-include,
+    --with-ltdl-lib.
+  - New LT_CONFIG_LTDL_DIR macro to specify a different directory name
+    for a convenience libltdl.
+  - libtoolize has been completely overhauled.
+  - `libtoolize --install' now also installs `install-sh'.
+  - New libtoolize options: --non-recursive, --recursive, --subproject.
+    These options control the way libltdl is installed into a package by
+    libtoolize.  The new recursive and non-recursive build modes for
+    libltdl don't require a subconfigure any more.
+    The Libtool package itself builds libltdl nonrecursively.
+  - The 'nonrecursive', 'recursive' and 'subproject' libltdl build
+    modes are given as LTDL_INIT options.
+  - New make variable LTDLDEPS for use in output_DEPENDENCIES.
+  - New multi-module-loader safe libltdl handle iteration APIs:
+    lt_dlhandle_iterate, lt_dlhandle_fetch, lt_dlhandle_map.
+  - New lt_dlinterface_register to maintain separation of concerns
+    between modules loaded by different libraries.
+  - New lt_dlopenadvise takes a new lt_dladvise type argument, which
+    lets the caller request local or global symbol visibility from the
+    module loader with lt_dladvise_local and lt_dladvise_global
+    respectively.  If neither is given, or if lt_dlopen (or lt_dlopenext)
+    are called, then the system default module symbol visibility is used.
+  - The new lt_dladvise_init/lt_dladvise_destroy based APIs also allow
+    caller requests for a filename extension search with lt_dladvise_ext,
+    and for marking a module unloadable with lt_dladvise_resident.
+  - Allow shell special characters like `$' in source file names, but
+    not in object names, to enhance GCJ support.
+  - An entire new Autotest-based testsuite in addition to the old one.
+    Both testsuites have been made more useful for testing
+    cross-compilers.  The new testsuite exposes many more issues, but
+    may also be a little rocky on exotic systems.
+  - In 1.9b, a new variable inherited_linker_flags has been added to the
+    libtool library files.  This variable takes flags that should be
+    used by dependent libraries and programs, but that do not fit into
+    `dependency_libs' for both clarity and backward-compatibility.
+
+* Changes in supported systems or compilers:
+
+  - Removed bitrotted support for xlc on Mac OS X.
+  - Detection of compiler wrappers distcc/ccache and $host_alias prefix.
+  - Basic support for PIE (position-independent executables).
+  - Support for DragonFly BSD, improved support for FreeBSD.
+  - Improved support for GNU/kFreeBSD and GNU/NetBSD.
+  - Support for Interix 3 (Windows SFU) and newer versions.
+  - Support for AIX 6.1.
+  - Improved support for UnixWare.
+  - Initial support for RDOS.
+  - Initial Support for FC (modern Fortran).
+  - Support for Portland Group compiler, the Sun compiler suite on GNU/Linux,
+    and initial support for the IBM compiler suite on GNU/Linux/ppc.
+  - Support for linux-dietlibc (`diet' as well as `diet-dyn', separately).
+  - Building libltdl with a C++ compiler has been undusted.
+  - On (AIX?,) HP-UX, and OpenBSD, hardcoding has been changed to prefer
+    rpath over absolute dependent library names.  This fixes DESTDIR
+    installs, among others, on the non-HP-UX/PA systems.
+  - Use of C++ templates together with shared libraries has been
+    improved on some systems and with some compilers, but is still
+    ongoing work.  Feedback is desirable here.
+
+* Bug fixes:
+
+  - Fix libltdl on static platforms.
+  - Search paths with GCC on multilib systems like x86_64 have been fixed.
+  - Fixed a regression that prevented use of libltdl without autotools.
+  - Fix error with -version-info on systems with version_type=none, such
+    as BeOS.
+  - Fix symbol exporting for cases where command line length limits are
+    exceeded.
+  - Improve linking with C++ libraries on Solaris with Sun compiler.
+  - Fix installation of libraries that are required by installation
+    commands such as `ln' or `rm'.
+  - More robust parsing of mangled `.la' files inside libltdl, fixing a
+    possible overrun and a crash due to memory exhaustion.
+  - Fix compile command line for gcj on MinGW.
+  - Some configure variables have been renamed to fix caching:
+    lt_prog_compiler_pic_works to lt_cv_prog_compiler_pic_works
+    lt_prog_compiler_static_works to lt_cv_prog_compiler_static_works.
+  - Fix 1.9b regression: lt_dlopen(NULL) works on AIX again.
+  - Loads of smaller bug fixes.
+
+
+New in 1.9f: 2004-10-23; CVS version 1.9e, Libtool team:
+* Fix a regression in 1.9d, where ECHO was always set to 'echo' and the
+  backslash quoting tests were never run.
+* Fix a regression in 1.9d, where progpath was used for --no-reexec before it
+  was set.
+* Fix a regression in 1.9d, which required an installed automake to build the
+  bootstrapped tarball.
+* Fix hanging bug on MinGW.
+
+New in 1.9d: 2004-10-03; CVS version 1.9c, Libtool team:
+* If non-pic objects were not compiled, and libtool is called in link mode,
+  libtool no longer silently creates an empty archive, but rather falls
+  back to pic objects.
+* When compiling C glue code with $LTCC, libtool now saves the setting of
+  $compiler_flags from the C tag, and passes those flags to $LTCC.
+* libtool no longer dies when concurrently creating directories with
+  `make -j' on multi-processor hosts.
+* Return type, and name parameter of lt_dlloader_remove are no longer
+  `const'.
+* Name parameter of lt_dlloader_find is no longer 'const'.
+* The API for the slist ADT has been updated: slist_new has been replaced
+  by slist_box; slist_unbox and slist_sort are new; the footprint of
+  slist_remove and slist_fnid have changed; SListCallback and SListCompare
+  types have been exchanged.  See libltdl/slist.c for documentation.
+* libltdl is C89 compatible again.  lt_dlsymbol type removed, and lt_dlsymlist
+  structure changed to avoid using C99 flexible arrays.
+* Support self dlopening for executables on cygwin and mingw.
+* Improved support for linux-gnu/ia64.
+* Initial support for s390x-ibm-tpf.
+* Fixed some memory leaks in libltdl.
+* Improved support for OpenBSD (use rpath instead of hardcoding absolute
+  file names).
+
+New in 1.9b: 2004-08-29; CVS version 1.5a, Libtool team:
+* The /^_?LT_[A-Z_]+$/ namespace is now reserved for Libtool's own macros.
+  If you have any shell variables in this namespace they will need to be
+  renamed.  If you have any macros in this namespace please rename them to
+  prevent any possible future clash with libtool supplied macros.
+* New LT_PREREQ macro for specifying minimum libtool requirement.
+* New LT_INIT interface replaces AC_PROG_LIBTOOL, AC_ENABLE_SHARED,
+  AC_DISABLE_SHARED, AC_ENABLE_STATIC, AC_DISABLE_STATIC,
+  AC_ENABLE_FAST_INSTALL, AC_DISABLE_FAST_INSTALL, AC_LIBTOOL_DLOPEN,
+  AC_LIBTOOL_WIN32_DLL and AC_LIBTOOL_PIC_MODE.  Use autoupdate to modernise
+  your configure.ac files after installing this release.
+* New LT_LANG interface to enable libtool support for a specific language.
+* Language support is now only included if your configure.ac enables it,
+  either through a call to AC_PROG_CXX etc. or LT_LANG.
+* The libtool script will complain if it was built from mismatched ltmain.sh
+  and libtool m4 macro versions.
+* Like automake, libtoolize no longer installs config.guess and config.sub by
+  default.  Use new --install option to get the old behaviour.
+* libtoolize no longer supports the --ltdl-tar option.
+* libtool script is now created by config.status.  Instead of interrogating
+  `./libtool' from configure.ac after calling AC_PROG_LIBTOOL, use the
+  variable names directly.
+* libltdl is no longer a self-contained package, and shares configury with
+  the top level directory now.
+* Shared objects (.lo) are no longer created when `-static' is passed in
+  compile mode.
+* New compile mode option `-shared' prevents creation of static objects (.o).
+* New link mode option `-shared' creates only shared libraries at link time.
+* If you configure libtool with --disable-shared (or if libtool does not
+  support shared libraries on your platform) trying to build a library using
+  `-shared' is a fatal error.
+* New link mode option `-weak' tells libtool when not to propogate dependency
+  libraries from dlpreopened modules.
+* libtoolize installs libtool.m4, (ltdl.m4 if used,) and various supporting
+  m4 definitions to AC_CONFIG_MACRO_DIR.
+* Mode inferrence removed, shorthand for choosing modes added.
+* Specifying -allow-undefined is now an error.
+* Speed up max_cmd_len check.
+* libltdl can now preopen modules from within a library, and libtool will
+  accept -dlpreopen options when linking either a shared library or a
+  convenience library.
+* New function in libltdl: lt_dlhandle_find provides access to module handles
+  by module name.
+* New function in libltdl: lt_dlpreload_open opens all preloaded modules.
+* libltdl no longer loads shared libraries with global symbol resolution,
+  this caused problems when the symbols were intended to be overriden further
+  up the stack; it is also not recommended practice.
+* New function in libltdl: lt_dlhandle_first, primes handle iterations (using
+  lt_dlhandle_next) to filter by module interface.
+* libltdl no longer tries to support multi-threaded programming with
+  lt_dlmutex_register(), which was unusable with POSIX threads anyway.
+  The symbols are deprecated but exported for backwards compatibility.
+* libltdl no longer uses lt_dlmalloc, lt_dlrealloc and lt_dlfree.  The symbols
+  are still exported for backwards compatibility.
+* The lt_dlinfo struct has a new module field that can be used by dlloaders.
+* libltdl no longer supports pre-c89 compilers.  Some of the pre89 portability
+  functions had compile time bugs in them anyway, so you guys can't have been
+  using it :-)
+* make install now deletes preexisting $prefix/share/libtool before installing
+  latest files.
+* Extracting symbols from an import library on cygwin and win32 now works.
+* Initial support for amigaos-ppc.
+* Improved support for OpenBSD.
+* Support for Intel C++ version 8.0.
+* New support for IBM's xlc and xlc++ on Mac OS X.
+* Finished support for QNX RTOS.
+* Bug fixes.
+
+New in 1.5.8: 2004-08-07; CVS version 1.5.7a, Libtool team:
+* Support for Intel C++ version 8.0.
+* Improved support for OpenBSD.
+* Support for xlc on Mac OS X.
+* Better support for zsh as /bin/sh.
+* Much faster check for command line length on all BSD systems.
+* Better Mac OS X/darwin support.
+* Bug Fixes.
+
+New in 1.5.6: 2004-04-11; CVS version 1.5.5a, Libtool team:
+* Installs libltdl files properly in $prefix/share/libtool/libltdl. 1.5.4
+  did not install them at all.
+* libltdl correctly guesses the extension for loadable modules again.
+
+New in 1.5.4: 2004-04-03; CVS version 1.5.3a, Libtool team:
+* Bug fixes.
+
+New in 1.5.2: 2004-01-25; CVS version 1.5.0a, Libtool team:
+* lt_dlrealloc is an official part of the libltdl API.
+* --tag, --silent and --debug options are preserved and reused when libtool
+  calls itself for relinking etc.
+* `-pthread' and similar options are honoured when linking shared libraries.
+* -no-suppress in compile mode shows compiler output for both PIC and non-PIC
+  object compilation.
+* New link mode option `-precious-files-regex' to prevent accidental removal
+  of files you want to keep, such as test coverage data, from the temporary
+  output directory.
+* Directories specified in /etc/ld.so.conf are no longer hardcoded on GNU/Linux.
+* Recognises the 'R' symbol type on Solaris so read-only symbols can be
+  exported.
+* Bug fixes.
+
+New in 1.5.1: 2003-??-??; CVS version 1.5.0a, Libtool team:
+* lt_dlrealloc is an official part of the libltdl API.
+* Bug fixes.
+
+New in 1.5: 2003-04-14; CVS version 1.4e, Libtool team:
+* First stable release of multi-language architecture.
+* libtool and libltdl support for Mac OS/X.
+* libltdl will now use cygwins dlopen API instead of always forcing
+  LoadLibrary.
+* Support auto-import patch to binutils on cygwin for much improved dll
+  support.
+* Bug fixes.
+
+New in 1.4.3: 2002-10-13; CVS version 1.4.2a, Robert Boehne:
+* The libltdl subdirectory now bootstraps correctly with Automake 1.5.
+* srcdir != builddir builds with Automake 1.5 work correctly.
+* Support for mips-compaq-nonstopux.
+* New command line argument, --preserve-dup-deps prevents removal of
+  duplicate dependent libraries.
+
+New in 1.4d: 2002-01-07; CVS version 1.4c, Libtool team:
+* Help strings display correctly again.
+* Better error messages when library linking fails.
+* Better error messages from libltdl when loading fails.
+* Better search path management in libltdl with `lt_dlinsertsearchdir' call.
+* Support /lib/w32api in recent cygwin releases.
+* Support cross compilation to mingw.
+* Support for .rc files (Windows resource compiler).
+* Improved handling of mingw gcc.
+* Improved handling of $PATH with entries containing spaces.
+* Improved support for linking with gcc on aix4* and aix5*.
+* Improved support for GCC 3.0.
+* Initial support for QNX RTOS, UnixWare 7 and OpenUNIX 8.
+* Bug fixes to the OpenBSD port.
+* Bug fixes.
+
+New in 1.4.2: 2001-09-11; CVS version 1.4.1a, Gary V. Vaughan:
+* libltdl now builds on solaris again
+* diagnose and warn about not-quite-working combinations of gcc and
+  ld on solaris.
+* Improved OpenBSD support.
+* Improved cygwin support.
+* Bugfixes.
+
+New in 1.4.1: 2001-09-03; CVS version 1.4.0a, Libtool team:
+* Better error messages from libltdl when loading fails.
+* Don't leave here-doc files behind.
+* Improved support for OpenBSD.
+* Libtool will build with autoconf-2.50 and higher.
+* Plug memory management bugs in libltdl.
+* Prefer shl_load to dlopen for better operation on HP-UX.
+
+New in 1.4b: 2001-07-09; CVS version 1.4a, Libtool team:
+* Now bootstraps with autoconf-2.50 and automake-1.4-p4.
+* Always try to build at least a static lib, even if both static and
+  shared libs were disabled.
+* Full support for C++ compiler.
+* Support for GNU gcj compiler.
+* libltdl can now load all modules in a given path according to user
+  supplied criteria with `lt_dlforeachfile' call.
+* Improved support for AIX ia64, djgpp, HPUX, hurd, OpenBSD, sco3.2*.
+* Internal mutex handling no longer has namespace clashes on NCR MP-RAS.
+* New pdemo and tagdemo tests.
+* Bug fixes.
+
+New in 1.4: 2001-04-25; CVS version 1.3e, Libtool team:
+* Support for aix5*.
+* Bugfixes.
+
+New in 1.3d: 2001-04-02; CVS version 1.3c, Libtool team:
+* ltconfig is no more.  Generation of libtool happens directly from
+  the configure file.
+* Multithread safe with lt_dlmutex_register callback registration.
+* New -no-install flag to avoid the use of executable wrapper scripts.
+* New --with-pic, -prefer-pic and -prefer-non-pic flags to control
+  the generation of PIC/non-PIC code.
+* Support for hardcoding run-time paths (-R) into libraries.
+* Support -dlopen and -dlpreopen for libraries.
+* Libtool now allows you to link shared libraries against static code.
+* New functions in libltdl:
+  lt_dlgetinfo, lt_dlhandle_next and lt_dlforeach provide access to module
+  specific data in handles.
+  lt_dlcaller_register, lt_dlcaller_set_data and lt_dlcaller_get_data provide
+  management for user storage of per module data.
+  lt_dlloader_next, lt_dlloader_name, lt_dlloader_find, lt_dlloader_add and
+  lt_dlloader_remove can be used for adding new types of module loaders.
+  lt_dladderror, lt_dlseterror integrate user module loaders with lt_dlerror.
+* "-Xcompiler" and "-Wc," does now work in compile mode, too.
+* Support recent dlltool formats.
+* Start of support code for cross-compiling to win32.
+* libltdl can now be built as a dll with win32.
+* m4 macros needed to configure libltdl split out into libltdl/ltdl.m4.
+* New port to NEWS-OS Release 6.
+* Improved support for darwin (rhapsody), mingw32, NetBSD, Compaq Tru64 V5.0
+  and Digital Unix V4.*.
+* Initial support for ia64 linux.
+* Initial support for a.out freebsd shared libs.
+* Initial support for Paul Sokolovsky's pw32 POSIX over win32 layer.
+* Many bugfixes (especially in libltdl)
+
+New in 1.3b: 1999-07-02; CVS version 1.3a, Libtool team:
+* Complete inter-library dependencies support. It's now possible
+  to link libtool libraries against other libtool libraries.
+* Libtool is able to find already-installed libtool libraries,
+  even if they were moved out of their installation directory.
+* New "-Wc,flag" and "-Xcompiler flag" flags to pass flags
+  directly to the compiler
+* New "-Wl,flag" and "-Xlinker flag" flags to pass flags
+  directly to the linker
+* New "-no-fast-install" flag to selectively disable fast-install mode.
+* Support for installing stripped libraries using GNU strip (install -s).
+  Automake >= 1.5 will install stripped libraries with "make install-strip".
+* Allow linking shared libraries against static ones
+  on FreeBSD, GNU/Linux, GNU Hurd and Solaris
+* Support for linking DLLs on Win32
+* New `clean' mode to delete uninstalled files.
+* New demos and tests
+* Various bugfixes
+
+New in 1.3.5: 2000-05-27, CVS version 1.3.4a, Libtool team:
+* Support for mac OS X (rhapsody).
+* Support for *-sequent-sysv4.
+* Support for Cygwin-1.1.0.
+* Support recent dlltool formats.
+* Bugfixes.
+
+New in 1.3.4: 1999-12-08, CVS version 1.3.3a, Libtool team:
+* Support for Compaq Tru64 V5.0.
+* Improved support for Digital Unix V4.*.
+* Improved support for NetBSD, FreeBSD and Unixware.
+* Many fine bugfixes.
+
+New in 1.3.3: 1999-07-02, CVS version 1.3.2a, Libtool team:
+* New `-dlpreopen force' flag to ensure that
+  lt_preloaded_symbols is always defined.
+* Work around self-dlclose bug in FreeBSD 3.1.
+* Expand convenience libraries when creating reloadable objects.
+* Do not forget to import -L flags of convenience libraries.
+* Do not pass -whole-archive or equivalent to symbol extractor.
+* Create directory to expand convenience libraries only when needed.
+* Improved support for Cygwin, DJGPP and NetBSD
+* Various bugfixes
+
+New in 1.3.2: 1999-05-26, CVS version 1.3.1a, Libtool team:
+* Avoid circular links of objects and libraries.
+* Look for dlerror when dlopen was found in -ldl (typo).
+* Disable shared libraries with broken GNU ld on Solaris.
+
+New in 1.3.1: 1999-05-21, CVS version 1.3.0a, Libtool team:
+* Documentation improvements; recommend automake users to insert libtool.m4
+  in acinclude.m4
+* AC_LIBLTDL_CONVENIENCE and AC_LIBLTDL_INSTALLABLE now set INCLTDL.
+* New port to NEC UX/4800.
+* cygwin-b20.1 passes all tests.
+* Slightly improved BeOS support.
+* Many AIX 4.3.2 test failures have gone.
+* Pass unknown -L arguments through to the linker (for -LANG:* support).
+* Close a security hole with mode 777 directory during libltdl installation.
+* Fixed the infamous ``ifelse'' bug in libtool.m4
+
+New in 1.3: 1999-04-29, Libtool team:
+* This is just a summary of the changes since 1.2.
+  See the news of intermediate alpha releases below for details.
+* Support for convenience archives.
+* New maintainers.  Anonymous CVS and home page at gnu.org.
+* Portable dlopening interface with libltdl, new -module flag.
+* Correctly link installed libtool libraries into programs and other
+  libtool libraries.  Linking of uninstalled libtool libraries into
+  libraries is under development for 1.4.
+* Do not drop library dependencies on platforms that allow them.
+* Linking with uninstalled libraries no longer picks installed ones by
+  mistake.
+* Use libraries from the build tree when running uninstalled
+  executables (may require double linking).
+* Allow developers to optimize for build-tree executions.
+* Support -export-symbols-regex for controlled symbol exporting.
+* Support -R to hardcode directories in library search paths.
+* New ports, demos and tests.  Lots of improvements and bug fixes.
+
+New in CVS version 1.2g, Libtool team:
+* AM_PROG_LIBTOOL is smaller and faster
+* AC_LIBTL_L_WIN32_DLL is required in configure.in for libtool to
+  attempt to build dlls on win32 hosts
+* Shared libraries on AmigaOS up to version 4 are now disabled
+  since they don't meet libtool's requirements for shared libraries
+* -L supports now relative directories
+* Libltdl has a new license: LGPL with a special exception
+* Libltdl can be used as stand-alone package
+* dlopen support for BeOS
+* Partial support for Motorola System V 4
+* Improved support for AIX, BeOS, Cygwin, DJGPP, DU, IRIX and HP/UX
+* Documentation updates
+* New tests
+* Bugfixes
+
+New in 1.2f: 1999-03-15; CVS version 1.2e, Libtool team:
+* libtool will correctly link uninstalled libraries into programs
+  and prefer uninstalled libraries to installed ones
+* Library paths that are in the system default run-time search path
+  are no longer hardcoded into executables.
+* New fast installation mode, which links the final executable
+  in order to avoid relinking during installation.
+  Programs in the build-tree are relinked when executed.
+* New AC_DISABLE_FAST_INSTALL macro to set the default for
+  the fast-install mode to disabled
+* New -export-symbols-regex flag, to export symbols selectively by
+  a regular expression
+* Support -R for specifying run-time path of programs and library dependencies
+* New -avoid-version option to avoid versioning for libraries
+* libtool module names no longer need to have a "lib" prefix
+  (requires automake 1.4).
+* New -thread-safe flag, to build thread-safe libraries
+* Major improvements in libltdl: API documentation, installable version,
+  support for module search paths, support for lt_dlopen(0),
+  can be embedded into packages as a tar file (libltdl.tar.gz),
+  dynamic buffer allocation and buffer overflow checks,
+  new macro LTDL_SET_PRELOADED_SYMBOLS() which must be used in the
+  main program, dynamic memory allocation functions are user-defineable
+* New AC_LIBLTDL_CONVENIENCE and AC_LIBLTDL_INSTALLABLE macros, to select
+  convenience and/or installable versions of libltdl.
+* libltdl is now built and installed unless --disable-ltdl-install
+* New "-dlopen self" flag for dlopening the executable itself
+* New AC_LIBTOOL_DLOPEN macro to check for dlopen support,
+  required if you use -dlopen or -dlpreopen
+* If libtool could not satisfy all dependencies of a module
+  it will only build a static version of it
+* dld_preloaded_symbols was renamed to lt_preloaded_symbols
+* Support for BeOS
+* Improved support for FreeBSD, AIX, IRIX, OSF, SysV 4.3, HP/UX, DJGPP
+  BSD/OS 4.x and NetBSD
+* In order for libtool to attempt to link a shared library (dll) on win32
+  platforms, you must pass the -no-undefined flag to libtool in link mode.
+* The path to GNU ld now works on cygwin-b18 to cygwin-b20.2 at least.
+* Support for IRIX library versioning.
+* New demos and tests
+* Various bugfixes
+
+New in 1.2d: 1998-12-16; CVS version 1.2c, Libtool team:
+* libtool will correctly link already-installed libraries into programs.
+* New -module flag, to create loadable modules.
+* New libltdl, a small library for portable dlopening of modules.
+  It is still undocumented, but you can already find some examples in:
+* New mdemo directory, with tests of -module and dlopening examples.
+  Be aware that libltdl is only known to work on a few platforms such as
+  GNU/Linux and Solaris2.  Some mdemo tests are known to FAIL on several
+  other platforms; please ignore these failures by now (or work to fix
+  them :-).
+* Inter-library dependencies patch finally integrated, but there's
+  still much porting to do.  See PORTING for details (some plans for the
+  future in mail/deplibs in the CVS tree).
+* New option -export-symbols to control symbol exporting when possible.
+* Fixed -export-dynamic problem with C++ programs in egcs 1.1.
+* New dlpreopen structure.
+* libtool now supports `-c -o' and subdirectories in sources and
+  target object names even in platforms whose compilers do not support
+  this.  In this case, file locking occurs to avoid problems with
+  parallel builds.
+* New `echo' variant that should fix most problems with long command
+  lines and broken printf programs.
+* Support for DG/UX, UnixWare 7.x and FreeBSD 3.0, and improved
+  support for Microsoft Windows
+* Various bugfixes
+* We now have anonymous CVS access to GNU libtool.  CVSROOT is
+  :pserver:anoncvs@anoncvs.gnu.org:/gd/gnu/anoncvsroot.  The password
+  is empty.  The directory is libtool.  Check our home-page at
+  http://www.gnu.org/software/libtool/libtool.html for details.
+* Alexandre Oliva, Thomas Tanner and Gary V. Vaughan have taken over
+  the maintenance of libtool.
+* Arguments to ltconfig have been changed to allow creation of a
+  libtool C program, totally unusable as of this release.
+
+New in 1.2b - 1998-07-01, Gordon Matzigkeit:
+* Libtool needs a new maintainer, since Gordon Matzigkeit has quit.
+  If you think you can do the job, send mail to bug-libtool@gnu.org.
+* Bug fixes.
+* Support for libtool convenience archives.
+
+New in 1.2a - 1998-04-19, Gordon Matzigkeit:
+* Bug fixes.
+* ltconfig accepts an `--output' option to specify the name of the
+  generated libtool.
+* New `--debug' flag to turn on shell script tracing for libtool,
+  libtoolize, and ltconfig.
+* Added `libtool --config' to print out all configuration variables.
+* Support for *-*-hpux11*.
+
+New in 1.2 - 1998-03-20, Gordon Matzigkeit:
+* Minor bug fixes to provide a stable public release.
+* Libtool no longer cseses Solaris printf to barf due to silly
+  2110-byte static buffers.
+
+New in 1.1 - 1998-03-08, Gordon Matzigkeit:
+* Bug fixes.
+* http://www.profitpress.com/libtool/ is libtool's homepage.
+* `AM_PROG_LIBTOOL' supports turning shared or static libraries off
+  with the `--enable-shared=PKGS' and `--enable-static=PKGS' configure
+  flags.  See (libtool)AM_PROG_LIBTOOL.
+* Use the `AM_DISABLE_SHARED' or `AM_DISABLE_STATIC' macros if you
+  wish to modify the default behaviour of `AM_PROG_LIBTOOL' for your
+  package.
+* New rules for `AM_PROG_LD' to use gcc's `-print-prog-name' flag in
+  order to find ld, if possible.
+* Suppress duplicate compiler output during `compile' mode.
+* Deleted `dlname' mode.  Dlopen applications should only use the
+  runtime search method described in (libtool)Finding the dlname.
+* Experimental support for dynamically loaded modules, even on
+  static-only platforms, via new `-dlopen' and `-dlpreopen' link
+  flags.
+* `compile' mode honours the `-static' flag to prevent libtool
+  from building PIC objects.
+* New `execute' mode to support debugging uninstalled libtool
+  libraries and executables.
+* `-allow-undefined' is now the default.  You can use `-no-undefined'
+  to declare that a shared library is completely self-contained.
+* Inter-library dependencies are automatically handled when linking
+  against an uninstalled `.la' file.
+* New `-all-static' flag to prevent any dynamic linking.  The regular
+  `-static' flag now just prevents dynamic linking of libtool libraries.
+* New `-release' flag to encode release numbers into libtool
+  libraries.  This breaks binary compatibility, but is useful for
+  libraries whose interfaces change very frequently.  See
+  (libtool)Versioning.
+* The `-rpath' flag can be used to hardcode absolute directories when
+  linking executables using libtool.
+* New robust quoting code to handle any metacharacters passed in
+  arguments to libtool commands.
+* Full support for broken collect2 on AIX 3.  Shared libraries
+  can now be built with all working versions of GCC on AIX.
+* Shell script speed optimizations for old and buggy /bin/sh systems,
+  such as HP-UX 9 and SunOS 4.1.4.
+* Maybe use `_libs' as a temporary libtool directory instead of `.libs'
+  in order to cope with MS-DOS filenames.
+* Portability fixes for Windows NT.
+* Refuse to create libtool libraries that don't begin with `lib'.
+  This allows us to correctly handle OSes that don't have the `lib'
+  prefix by default, such as OS/2.
+* Support for *-*-amigaos*, *-*-os2*, *-*-sysv4.2uw2*, and *-*-uts4*.
+
+New in 1.0 - 1997-07-08, Gordon Matzigkeit:
+* Bug fixes.
+* Better configuration test to find the system linker.  The old test
+  was failing because people frequently install GNU ld, but don't
+  necessarily configure GCC to use it.
+* Automake support for Libtool now uses the LTLIBRARIES primary.  See
+  the Automake documentation for more information.
+* Added new `--disable-static' flag to disable building static
+  libraries on platforms that have shared libs.
+* New `-allow-undefined' link flag to build shared libs that contain
+  references to unresolved symbols.
+* Removed all support for creating static-only libraries.
+* Basic support for dynamically loaded modules: new `-export-dynamic'
+  linking flag and corresponding `dlname' mode.
+* New `--features' flag to display configured libtool attributes.
+* Added support for installing libtool objects, both in absolute and
+  relative directories.
+* Support *-*-linux-gnu* as an alias for *-*-linux*.
+* Support for *-*-openbsd* and *-*-freebsd3*.
+
+New in 0.9 - 1997-02-03, Gordon Matzigkeit:
+* Bug fixes.
+* The libtool demo now uses the libm cos(3) function, to demonstrate
+  inter-library dependencies.
+* The PLATFORMS file has been moved to doc/platforms.texi.
+
+New in 0.8 - 1997-01-26, Gordon Matzigkeit:
+* Bug fixes, and more documentation.
+* Basic support for other language compilers (C++, Fortran, and
+  preprocessed assembler).
+* Libtool is now more persistent when linking with the `-static'
+  flag fails.
+* New test for hardcoding system linkers, to verify that libtool
+  neither creates incorrect binaries, nor takes unnecessary
+  precautions while linking against uninstalled shared libraries.
+* For clarity, the demo subdirectory no longer uses ansi2knr, and has
+  been rewritten to avoid ANSI-only constructs.
+* Support for *-*-irix5, *-*-irix6*, and *-*-sco3.2v5*.
+
+New in 0.7 - 1996-12-08, Gordon Matzigkeit:
+* Total rewrite of libtool, along with a new model for library building.
+* Completely rewritten documentation for the new paradigm.
+* Sane handling of broken system linkers, such as the ones on AIX
+  and HP-UX.
+* configure mode is now a separate program, `ltconfig'
+* The libinfo helper script has been incorporated into the main
+  libtool program.
+* Automatic mode guessing, based on the command line.
+* Full support for Automake 1.2 (including ansi2knr features).
+* Support to create reloadable objects using link mode.
+* Support for new `-static' linking flag.
+* Support for stripping libraries during installation.
+* Library version information is now passed on the command line, not
+  through a version file.
+
+Version 0.6 was never released.
+
+New in 0.5:
+* Disabled install-progs until next version, when it will be correctly
+  implemented.
+* Clearer library versioning documentation.  See (libtool)Versioning.
+* Renamed gm_PROG_LIBTOOL to AM_PROG_LIBTOOL
+* Libtool now creates pseudo-objects named foo.lo and pseudo-archives named
+  libfoo.la instead of foo.o and libfoo.a.  See the documentation.
+* libtool compile doesn't interfere with user CFLAGS if they don't
+  conflict with the current objtype.  From Karl Berry.
+* Created new libinfo helper script.
+* libversion.in files are obsolete -- libtool uses libinfo to read the
+  new LIBINFO files.
+* Libtool is better at finding its config file and helper scripts.
+* Support for *-*-gnu*
+
+New in 0.4:
+* Bug fixes and new regression tests
+* On unsupported configurations, ``libtool configure'' demotes OBJTYPES to
+  `standard' instead of aborting
+* Added new object type, `t', for tcov(1) support
+* Support for *-*-aix3*, *-*-aix4*, *-*-hpux10*, *-*-osf3*, and *-*-solaris2*
+
+New in 0.3:
+* Bug fixes and new regression tests
+* Added new uninstall-libs mode
+* Added a host argument to configure mode
+* Fixed debugging/hyper-optimizing flags conflict (from Karl Berry)
+* Support for --no-whole-archive when needed by GNU ld (from Ulrich Drepper)
+* Implementation of --enable-linktype, --enable-profile, --enable-shared,
+  --enable-static in gm_PROG_LIBTOOL macro
+* New `libtoolize' program (modeled after GNU gettext's `gettextize') to help
+  conversion to libtool
+* New ABOUT-LIBS document for inclusion with libtool-supported packages
+
+New in 0.2:
+* Support for *-*-linux
+* Better checking for GNU ld
+* Reimplemented the config file so that it corresponds more closely to the
+  variables listed in (libtool)Porting Libtool.
+* Reimplemented the shared library version scheme.  See (libtool)Versioning.
+* Replaced `--config-file' and `--version-file' options with `--confdir'
+* Added new install-libs and install-progs modes
+
+New in 0.1:
+* First release of libtool
+* Support for: *-*-freebsd*, *-*-netbsd*, *-*-sunos4*, *-*-ultrix4*
+-- 
+  Copyright (C) 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
+  2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/README b/README
new file mode 100644
index 0000000..f88901c
--- /dev/null
+++ b/README
@@ -0,0 +1,326 @@
+GNU Libtool
+***********
+
+1. Introduction
+===============
+
+This is GNU Libtool, a generic library support script.  Libtool hides
+the complexity of using shared libraries behind a consistent, portable
+interface.
+
+Libtool's home page is:
+
+    http://www.gnu.org/software/libtool/libtool.html
+
+See the file NEWS for a description of recent changes to Libtool.
+
+Please note that you can build GNU Libtool from this directory using a
+vendor Make program as long as this is an official release tarball;
+otherwise you will need GNU Make for sane VPATH support.  See the file
+INSTALL for complete generic instructions on how to build and install
+Libtool.  Also, see the file doc/notes.txt for some platform- specific
+information.
+
+See the info node (libtool)Tested Platforms. (or the file doc/PLATFORMS)
+for a list of platforms that Libtool already supports.
+
+Please try it on all the platforms you have access to:
+
+ * If it builds and passes the test suite (`gmake check'), please send
+   a short note to the libtool mailing list <libtool@gnu.org> with a
+   subject line including the string `[PLATFORM]', and containing the
+   details from the end of `./libtool --help' in the body.
+ * Otherwise, see `Reporting Bugs' below for how to help us fix any
+   problems you discover.
+
+To use Libtool, add the new generic library building commands to your
+Makefile, Makefile.in, or Makefile.am.  See the documentation for
+details.
+
+
+2. Reporting Bugs
+=================
+
+If this distribution doesn't work for you, before you report the
+problem, at least try upgrading to the latest released version first,
+and see whether the issue persists.  If you feel able, you can also
+check whether the issue has been fixed in the development sources for
+the next release (see `Obtaining the Latest Sources' below).
+
+Once you've determined that your bug is still not fixed in the latest
+version, please send a full report to <bug-libtool@gnu.org>, including:
+
+  1. the information from the end of the help message given by
+     `./libtool --help', and the verbose output of any failed tests
+     (see `The Test Suites' immediately below);
+  2. complete instructions for how to reproduce your bug, along with
+     the results you were expecting, and how they differ from what you
+     actually see;
+  3. a workaround or full fix for the bug, if you have it;
+  4. a copy of `tests/testsuite.log' if you are experiencing failures
+     in the Autotest testsuite.
+  5. new test cases for the testsuite that demonstrate the bug are
+     especially welcome, and will help to ensure that future releases
+     don't reintroduce the problem - if you're not able to write a
+     complete testsuite case, a simple standalone shell script is
+     usually good enough to help us write a test for you.
+
+If you have any other suggestions, or if you wish to port Libtool to a
+new platform, please send email to the mailing list <libtool@gnu.org>.
+
+Please note that if you send us an non-trivial code for inclusion in a
+future release, we may ask you for a copyright assignment (for brief
+details see the `Copyright Assignment' section on our `Contributing'
+webpage <http://www.gnu.org/software/libtool/contribute.html>).
+
+
+3. The Test Suites
+==================
+
+Libtool comes with two integrated sets of tests to check that your build
+is sane.  You can run both test suites like this, assuming that `gmake'
+refers to GNU make:
+
+    gmake -k check
+
+If you want to run the old testsuite only, do it like this:
+
+    gmake check TESTSUITEFLAGS=-V
+
+If you want to run the new testsuite only, do it like this:
+
+    gmake check-local
+
+The tests of the old test suite run in groups in the various demo
+subdirectories, so if one of the tests early in a group FAILs, the rest
+of the tests in that group will be SKIPped.  If you see a FAIL further
+into a group, even if a test with the same name PASSes in another test
+group, you need to take note of the name of the first test in the group
+if you want to rerun the group with FAILures to get verbose output.
+
+To run a test group of the old test suite in isolation (say, you think
+you have fixed a bug, but don't want to rerun the entire suite), you can
+do it like this:
+
+    gmake check TESTSUITEFLAGS=-V TESTS="tests/cdemo-static.test \
+        tests/cdemo-static-make.test tests/cdemo-static-exec.test"
+
+Providing that you have a FAIL from the most recent group from a
+particular demo directory (like the cdemo-static.test group above), you
+can explore the state of the directory to help with debugging.
+
+If you wish to report a test group failure to the libtool list, you need
+to send the verbose output of the FAILing group, along with the
+information from the end of `$(top_builddir)/libtool --help' to the bug
+report mailing list, <bug-libtool@gnu.org> with a subject line that
+includes the string `[TEST FAILURE]'.  The file test-suite.log contains
+the verbose output from all failed tests.
+
+In order to enable debug shell tracing, you can set VERBOSE=debug when
+running the old test suite.
+
+In the long run, Libtool will move to using only the new, Autotest-
+driven testsuite.  Its usage is documented in:
+
+    info Autoconf 'testsuite Invocation'
+
+but simple help may also be obtained through:
+
+    gmake check-local TESTSUITEFLAGS='--help'
+
+For verbose output, add the flag `-v', for running only a subset of the
+independent tests, merely specify them by number or by keyword, both of
+which are displayed with the `--list' flag.  For example, the `libtool'
+keyword is used for the tests that exercise only this script.  So it is
+possible to test an installed script, possibly from a different Libtool
+release, with:
+
+    gmake check-local \
+        TESTSUITEFLAGS="-k libtool LIBTOOL=/path/to/libtool"
+
+Some tests, like the one exercising max_cmd_len limits, make use of this
+to invoke the testsuite recursively on a subset of tests.  For these
+tests, the variable INNER_TESTSUITEFLAGS may be used.  It will be
+expanded right after the `-k libtool', without separating whitespace, so
+that further limiting of the recursive set of tests is possible.  For
+example, to run only the template tests within the max_cmd_len, use:
+
+    gmake check-local TESTSUITEFLAGS="-v -x -k max_cmd_len \
+		      INNER_TESTSUITEFLAGS=',template -v -x'"
+
+If you wish to report test failures to the libtool list, you need to
+send the file `tests/testsuite.log' to the bug report mailing list,
+<bug-libtool@gnu.org>.
+
+
+4. Obtaining the Latest Sources
+===============================
+
+* With the exception of ancient releases, all official GNU Libtool
+  releases have a detached GPG signature file.  With this you can verify
+  that the corresponding file (i.e. without the `.sig' suffix) is the
+  same file that was released by the owner of it's GPG key ID.  First,
+  be sure to download both the .sig file and the corresponding release,
+  then run a command like this:
+
+    gpg --verify libtool-x.y.z.tar.gz.sig
+
+  If that command fails because you don't have the required public key,
+  then run this command to import it:
+
+    gpg --keyserver keys.gnupg.net --recv-keys 2983D606
+
+  and then rerun the `gpg --verify' command.
+
+* Official stable releases of GNU Libtool, along with these detached
+  signature files are available from:
+
+    ftp://ftp.gnu.org/gnu/libtool
+
+  To reduce load on the main server, please use one of the mirrors
+  listed at:
+
+    http://www.gnu.org/order/ftp.html
+
+* Alpha quality pre-releases of GNU Libtool, also with detached
+  signature files are available from:
+
+    ftp://alpha.gnu.org/gnu/libtool
+
+  and some of the mirrors listed at:
+
+    http://www.gnu.org/order/ftp.html
+
+* Nightly snapshots of the unreleased development trunk of GNU Libtool
+  are available from:
+
+    http://pogma.com/libtool
+
+  These files do not have signatures, but will allow you to easily
+  determine whether the most recent development code still exhibits any
+  bugs you have discovered, without requiring you to install a complete
+  build environment and the extra tools needed to bootstrap a version
+  control checkout.
+
+* The master libtool repository is stored in git.
+
+  If you are a member of the savannah group for GNU Libtool, a writable
+  copy of the libtool repository can be obtained by:
+
+    git clone <savannah-user>@git.sv.gnu.org:/srv/git/libtool.git
+
+  If you are behind a firewall that blocks the git protocol, you may
+  find it useful to use
+
+    git config --global url.http://git.sv.gnu.org/r/.insteadof \
+      git://git.sv.gnu.org/
+
+  to force git to transparently rewrite all savannah git references to
+  use http.
+
+  If you are not a member of the savannah group for GNU Libtool, you can
+  still fetch a read-only copy with either:
+
+    git clone git://git.sv.gnu.org/libtool.git
+
+  or using the CVS pserver protocol:
+
+    cvs -d:pserver:anonymous@pserver.git.sv.gnu.org:/srv/git/libtool.git \
+        co -d libtool HEAD
+
+* Before you can build from git, you need to bootstrap.  This requires:
+  - Autoconf 2.62 or later
+  - Automake 1.11.1 or later
+  - Help2man 1.29 or later
+  - Xz 4.999.8beta or later (from <http://tukaani.org/xz>)
+  - Texinfo 4.8 or later
+  - Any prerequisites of the above (such as m4, perl, tex)
+
+  Note that these bootstrapping dependencies are much stricter than
+  those required to use a destributed release for your own packages.
+  After installation, GNU Libtool is designed to work either standalone,
+  or optionally with:
+  - Autoconf 2.59 or later
+  - Automake 1.9.6 or later
+
+* The `bootstrap' script sets up the source directory for you to hack,
+  though it may take quite some time to run.  If you don't intend to
+  re-run the test suite, you can speed up the `bootstrap' step by an
+  order of magnitude if you call it like this instead:
+
+    reconfdirs='. libltdl' ./bootstrap
+
+
+5. Version Numbering
+====================
+
+People have complained that they find the version numbering scheme under
+which libtool is released confusing... so we've changed it!
+
+It works like this:
+
+	<major-number>.<minor-number>
+
+Releases with a <major-number> less than 1 were not yet feature
+complete.  Releases with a <major-number> of 1 used the old numbering
+scheme that everyone disliked so much.  Releases with a <major-number>
+of 2 us the new scheme described here.  If libtool ever undergoes a
+major rewrite or substantial restructuring, the <major-number> will be
+incremented again.
+
+If we make a patch release to fix bugs in a stable release, we use a
+third number, so:
+
+      <major-number>.<minor-number>.<micro-number>
+
+Version numbers are chosen to make it easy for users to decide two
+things:
+
+  Q: How `developed' is this release?
+  A: The higher the number, the better!
+  Q: How `stable' is this release?
+  A: - If the <minor-number> is even, it is a stable release, `2.0'.
+     - If the <minor-number> is odd, it is a development version with
+       new features compared to the last stable release, `2.1a'.
+     - If it has an `odd'[1] letter after the version number,  it is a
+       snapshot direct from CVS, `2.1a'.
+     - If it has an `even'[1] letter after the version number, it is an
+       alpha quality release, `2.1b'.
+     - If it has three numbers in the version, it is a patch release,
+       fixing bugs from the stable release (with no new features), `2.0.1'.
+
+[1] We always increment the letter in the repository before *and* after
+    making a release tarball.  This means that "odd" letters
+    (a,c,e,g...) only exist in the repository, and "even" letters are
+    used instantaneously for an alpha release.  Since the odd lettered
+    version numbers cover many states of the tree, we also qualify them
+    by adding the cvs version of the ChangeLog:
+
+    $ libtool --version
+    ltmain.sh (GNU libtool 1.1603 2004/09/12 22:02:07) 2.1a
+
+    Copyright (C) 2004  Free Software Foundation, Inc.
+    This is free software; see the source for copying conditions.  There is NO
+    warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+For more details about version numbers, see:
+
+    http://www.gnu.org/software/libtool/contribute.html
+--
+  Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+  Foundation, Inc.
+  Written by Gary V. Vaughan, 2004
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
+
+
+Local Variables:
+mode: text
+fill-column: 72
+End:
+vim:tw=72
diff --git a/THANKS b/THANKS
new file mode 100644
index 0000000..da43e65
--- /dev/null
+++ b/THANKS
@@ -0,0 +1,227 @@
+* GNU Libtool could not be what it is today without the invaluable help of
+  the people named in this file.
+
+
+* The following people have made sufficiently significant code contributions
+  to Libtool that an exchange of legal papers with the FSF was warranted:
+
+  Gord Matzigkeit		gord@gnu.org			  1996-07-11
+  Kean Johnston			jkj@sco.com			  1997-08-26
+  Gary V. Vaughan		gary@gnu.org			  1998-11-24
+  Alexandre Oliva		oliva@dcc.unicamp.br		  1999-03-26
+  Thomas Tanner			tanner@ffii.org			  1999-06-23
+  Pavel Roskin			pavel_roskin@geocities.com	  1999-07-20
+  Ossama Othman			ossama@debian.org		  1999-12-06
+  Lars J. Aas			lars@sim.no			  2000-07-07
+  Morten Eriksen		morten@sim.no			  2000-07-07
+  Robert Boehne			rboehne@gnu.org			  2000-09-25
+  Stepan Kasal			kasal@ucw.cz			  2000-04-12
+  Paul Sokolovsky		Paul.Sokolovsky@technologist.com  2000-05-06
+  Daniel P. McNichol		mcnichol@austin.ibm.com		  2000-12-08
+  Bruce Korb			bkorb@gnu.org			  2000-10-11
+  Tim Van Holder		tim.van.holder@pandora.be	  2001-02-20
+  Derek R. Price		dprice@collab.net		  2001-03-12
+  Edward M. Lee			tailbert@yahoo.com		  2001-03-22
+  Erik Lindahl			erik@theophys.kth.se		  2001-08-22
+  Carsten Griwodz		griff@ifi.uio.no		  2001-08-29
+  Hans-Peter Nilsson		hp@bitrange.com			  2001-10-24
+  Akim Demaille			akim@freefriends.org		  2001-11-01
+  Francis James Franklin	fjf@alinameridon.com		  2001-11-15
+  Robert Collins		rbtcollins@hotmail.com		  2001-12-27
+  Michael Elizabeth Chastain	mec@shout.net			  2001-12-27
+  Nishio Futoshi		fut_nis@d3.dion.ne.jp		  2002-01-23
+  Trevor Forbes			trevorf@idl.com.au		  2002-04-26
+  Charles S. Wilson		cwilson@ece.gatech.edu		  2002-05-23
+  Federico G. Schwindt		fgsch@openbsd.org		  2002-05-21
+  Greg McGary			greg@mcgary.org			  2002-06-05
+  Robert J. Friesenhahn		bfriesen@simple.dallas.tx.us	  2002-06-27
+  Assar Westerlund		assar@kth.se			  2002-09-13
+  Allan Sandfeld Jensen		snowwolf@one2one-networks.com	  2002-10-07
+  Ross Douglas Alexander	ross.alexander@uk.neceur.com	  2002-10-29
+  Alexandre Duret-Lutz		duret_g@lrde.epita.fr		  2002-11-06
+  Christian Cornelssen		ccorn@cs.tu-berlin.de		  2002-11-05
+  Jan Kratochvil		project-libtool@jankratochvil.net 2003-01-28
+  Raja R. Harinath		harinath@acm.org		  2003-02-25
+  Paolo Bonzini			bonzini@gnu.org			  2003-03-01
+  Richard Nicholas Somer Dawe	rich@phekda.freeserve.co.uk	  2003-03-12
+  Peter O'Gorman		peter@pogma.com			  2003-03-14
+  Ralph Schleicher		rs@nunatak.allgaeu.org		  2003-03-13
+  Keith Packard			keithp@keithp.com		  2003-03-12
+  Felix Lee			felix.1@canids.net		  2003-03-31
+  Bernardo Innocenti		bernie@develer.com		  2003-07-31
+  Albert Chin-A-Young		china@thewrittenword.com	  2003-08-02
+  Scott Remnant			scott@netsplit.com		  2003-10-04
+  Robert Millan Hernandez	robertmh@gnu.org		  2003-10-16
+  Kevin Fleming			kpfleming@backtobasicsmgmt.com	  2003-11-17
+  Benjamin Reed			ranger@befunk.com		  2004-02-08
+  Ralf Wildenhues		Ralf.Wildenhues@gmx.de		  2004-02-12
+  Nick Hudson			skrll@netbsd.org		  2004-03-29
+  Noah Jeffrey Misch		noah@cs.caltech.edu		  2004-07-05
+  Thorsten Glaser		tg@66h.42h.de			  2004-10-11
+  Peter Rosin			peda@lysator.liu.se		  2005-04-12
+  Tim Rice			tim@multitalents.net		  2005-11-10
+  Eric Blake			ebb9@byu.net			  2006-01-18
+
+
+* The following additional people made especially gracious contributions of
+  their time and energy in helping to track down bugs, port to new systems,
+  and generally assist in the libtool maintainership process:
+
+  Alan Hourihane		alanh@fairlite.co.uk
+  Alexei Sheplyakov		varg@theor.jinr.ru
+  Alon Bar-Lev			alon.barlev@gmail.com
+  Andreas Schwab		schwab@suse.de
+  Andrey Slepuhin		pooh@msu.ru
+  Aneesh Kumar K.V		kvaneesh@hotmail.com
+  Brad Smith			brad@comstyle.com
+  Brent Leback			brent.leback@st.com
+  Brian Barrett			brbarret@osl.iu.edu
+  Bruno Haible			haible@ilog.fr
+  Brice De Bruyne		bricedb@gmail.com
+  Camilo La Rota		camilo.larota@ens-lyon.fr
+  Carl D. Roth			roth@cse.ucsc.edu
+  Chris Demetriou		cgd@google.com
+  Chris P. Ross			cross@eng.us.uu.net
+  Christian Biesinger		cbiesinger@web.de
+  Christian Rössel		christian.roessel@gmx.de
+  Christoph Egger		Christoph_Egger@gmx.de
+  Christopher Hulbert		cchgroupmail@gmail.com
+  Craig Tierney			Craig.Tierney@noaa.gov
+  Dalibor Topic			robilad@kaffe.org
+  Dan McMahill			mcmahill@mtl.mit.edu
+  Daniel Reed			n@ml.org
+  Daniel Richard G.		skunk@iSKUNK.ORG
+  Dave Korn			dave.korn.cygwin@googlemail.com
+  DJ Delorie			dj@delorie.com
+  Donn Washburn			n5xwb@comcast.net
+  Edouard G. Parmelan		Edouard.Parmelan@France.NCR.COM
+  Erez Zadok			ezk@shekel.mcl.cs.columbia.edu
+  Eric Estievenart		eric@via.ecp.fr
+  Ethan Mallove			ethan.mallove@sun.com
+  Frank Ch. Eigler		fche@cygnus.com
+  Fred Cox			sailorfred@yahoo.com
+  Gerald Pfeifer		gerald@pfeifer.com
+  H.J. Lu			hjl@gnu.org
+  Henning Nielsen Lund		hnl_dk@amigaos.dk
+  Howard Chu			hyc@highlandsun.com
+  Ian Lance Taylor		ian@cygnus.com
+  Ingo Weinhold			ingo_weinhold@gmx.de
+  Jakub Bogusz			qboosh@pld-linux.org
+  Jacob Meuser			jakemsr@jakemsr.com
+  James Su			james.su@gmail.com
+  Jan Engelhardt		jengelh@medozas.de
+  Jay Krell			jay.krell@cornell.edu
+  Jeff Squyres			jsquyres@lam-mpi.org
+  Jeremy C. Reed		reed@reedmedia.net
+  Jim Meyering			jim@meyering.net
+  Joakim Tjernlund		joakim.tjernlund@transmode.se
+  Joel N. Weber II		devnull@gnu.org
+  Joerg Sonnenberger		joerg@netbsd.org
+  John Bowler			jbowler@acm.org
+  John R. Cary			cary@txcorp.com
+  John Wolfe			jlw@sco.com
+  Josh Hursey			jjhursey@open-mpi.org
+  Joseph Beckenbach III		jrb3@best.com
+  Karl Berry			karl@freefriends.org
+  Kenneth Albanowski		kjahds@kjahds.com
+  Kevin Ryde			user42@zip.com.au
+  Khem Raj                      raj.khem@gmail.com
+  KO Myung-Hun			komh@chollian.net
+  Kurt D. Zeilenga		Kurt@OpenLDAP.Org
+  Lennart Poettering		lennart@poettering.net
+  Lionel Landwerlin             llandwerlin@gmail.com
+  Maciej Helminiak		dion2@wp.pl
+  Maciej W. Rozycki		macro@linux-mips.org
+  Mahesh Narayanamurthi		mahesh.mach@gmail.com
+  Manfred Weichel		Manfred.Weichel@pdb.siemens.de
+  Marc Espie			espie@nerim.net
+  Marc J. Fraioli		fraioli@dg-rtp.dg.com
+  Marcel Loose			loose@astron.nl
+  Mark Kettenis			kettenis@phys.uva.nl
+  Markus Duft			markus.duft@salomon.at
+  Matthijs Kooijman		matthijs@stdin.nl
+  Micheal E. Faenza		mfaenza@mitre.org
+  Michael Haubenwallner		michael.haubenwallner@salomon.at
+  Mike Gorchak			mike@malva.ua
+  Mike Frysinger		vapier@gentoo.org
+  Nix				nix@esperi.org.uk
+  Olaf Lenz			olenz@fias.uni-frankfurt.de
+  Olly Betts			olly@muscat.co.uk
+  Patrice Fromy			patrice.fromy@u-psud.fr
+  Patrick Welche		prlw1@newn.cam.ac.uk
+  Paul Biggar			paul.biggar@gmail.com
+  Paul Eggert			eggert@twinsun.com
+  Paul Laight			plaight@quantxautomation.co.uk
+  Paweł Daniluk			pawel@bioexploratorium.pl
+  Peter Eisentraut		peter_e@gmx.net
+  Peter Fritzsche		peter.fritzsche@gmx.de
+  Peter Jeremy			peterjeremy@optushome.com.au
+  Peter Kjellerstedt		peter.kjellerstedt@axis.com
+  Philip Allison		philip.allison@smoothwall.net
+  Rainer Emrich			r.emrich@de.tecosim.com
+  Rainer Orth			ro@TechFak.Uni-Bielefeld.DE
+  Rainer Tammer			tammer@tammer.net
+  Ralf Menzel			menzel@ls6.cs.uni-dortmund.de
+  Richard B. Kreckel		kreckel@ginac.de
+  Richard Purdie		rpurdie@rpsys.net
+  Richard Sandiford		richards@transitive.com
+  Robert Garron			Robert.Garron@Access3000.net
+  Robert Millan			rmh@aybabtu.com
+  Robert Ögren			lists@roboros.com
+  Roberto Bagnara		bagnara@cs.unipr.it
+  Roland Mainz			roland.mainz@nrubsig.org
+  Roumen Petrov			bugtrack@roumenpetrov.info
+  Rudolf Leitgeb		r.leitgeb@x-pin.com
+  Ryan Hill			dirtyepic@gentoo.org
+  Sam Thursfield		ssssam@gmail.com
+  Scott McCreary		scottmc2@gmail.com
+  Sebastian Wilhelmi		wilhelmi@ira.uka.de
+  Simon Josefsson		jas@extundo.com
+  Stephan Kulow			coolo@kde.org
+  Steve Ellcey			sje@cup.hp.com
+  Steven M. Schultz		sms@wlv.iipo.gtegsc.com
+  Svante Signell		srs@kth.se
+  Sven Verdoolaege		skimo@liacs.nl
+  Terry D. Dontje		Terry.Dontje@Sun.COM
+  Tim Mooney			mooney@dogbert.cc.ndsu.NoDak.edu
+  Todd Vierling			tv@pobox.com
+  Tom Tromey			tromey@cygnus.com
+  Tor Lillqvist			tml@iki.fi
+  Ulrich Drepper		drepper@ipd.info.uni-karlsruhe.de
+  Warren Dodge			warren.l.dodge@Tektronix.com
+  Vadim Zeitlin			vz-libtool@zeitlins.org
+  Vincent Lefevre		vincent@vinc17.org
+  Vincent Torri			vtorri@univ-evry.fr
+  Xavier Pianet			xavier@xingo.com
+  Юрий �ндреевич Пухаль�кий	pooh@cryptopro.ru
+
+
+* And, not forgetting everyone that was kind enough to spend time testing
+  libtool, use it in their packages and report bugs, all of whom are too
+  numerous to mention here.  Many people who have kindly submitted bug reports
+  and small patches are credited for their contributions in the ChangeLogs.
+
+-- 
+  Copyright (C) 1996, 1998, 1999, 2001, 2002, 2003, 2004, 2005, 2006,
+                2007, 2008, 2009, 2010, 2011 Free Software Foundation,
+                Inc.
+  Written by Gord Matzigkeit, 1996
+
+  This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
diff --git a/TODO b/TODO
new file mode 100644
index 0000000..acdf05c
--- /dev/null
+++ b/TODO
@@ -0,0 +1,345 @@
+GNU Libtool
+***********
+
+1. In the near future
+=====================
+
+1.1. libtool
+------------
+
+* Rather than looking up the linker's hardcode characteristics in a
+  table of shell code, use objdump or equivalent to probe a test program
+  at configure time.
+
+* Eliminate the warnings from autoconf -Wobsolete.
+
+* Hook the various language dependencies into the autoconf _AC_LANG
+  framework.
+
+* Work out what to do when the dynamic linker loads needed dependencies.
+
+* We could have an option to hardcode paths into libraries, as well as
+  binaries: `... -Wl,-soname -Wl,/tmp/libtest.so.0 ...'.  This is not
+  possible on all platforms, and is in part obviated by the ability of
+  linking libtool libraries specified with -lname, but it might still
+  be desirable.
+
+* Lists of exported symbols should be stored in the pseudo library
+  so that the size of lt_preloaded_symbols can be reduced.
+
+* Have some option to tell libtool not to include -L flags that point
+  into a certain tree in the dependence list of an installed library.
+  For example: -L-$top_builddir would let one link with libtool
+  libraries in sibling subdirectories within a project, using the -L
+  notation, without getting builddir pathnames ever mentioned in .la
+  files that get installed.
+
+* Eric Lemings <elemings@cyberia.lemings.com> writes:
+  Because of a growing number of config scripts for packages in GNOME 1.2
+  (e.g. glib-config, xml-config, orbit-config. etc), development of GNOME
+  2.0 spawned a separate tool called pkg-config that allows all packages
+  to use one tool rather than several different scripts to query compile
+  flags, link flags, and other configuration data.
+
+  The functionality of pkg-config seems to me to have a lot of overlap
+  with the goals of libtool.  I was wondering if anyone had considered
+  adding an eighth mode to libtool that just queries the installed
+  library for the same information that pkg-config provides.  Since
+  most packages that use pkg-config also use libtool, I think this
+  would be a good way to reduce maintainer and developer dependencies.
+
+* Have libtoolize install `install-sh' if a newer version is available,
+  and/or Automake is not used.
+
+* Allow to specify linking some dependent libraries statically and some
+  dynamically, where possible.
+
+* Improve support for C++ with templates.
+
+* Audit file listing in libtool.m4.
+
+* Fix deplibs_check_method=pass_all (which is wrong!) on GNU/Linux.
+
+* Fix -dlopen "self" on AIX.  Reported by Gary Kumfert <kumfert@llnl.gov>.
+
+* Fix denial of service if using installed `libtool' on a different mount point
+  together with a compiler which does not understand `-c -o'.
+  Reported by Marcin Siennicki.
+
+* Look at better -no-undefined support, maybe along the idea of
+  [support #103719] for CC.
+
+
+1.2. libltdl
+------------
+
+* Change libltdl interface: add separate functions for function
+  pointers.  This will allow porting to systems where function pointers
+  are incompatible with data pointer C-wise.
+
+* Fix the following bugs in libltdl:
+ - error reporting of tryall_dlopen():
+   if the file actually doesn't exist (stat() fails or it wasn't dlpreopened)
+   -> report `file not found'
+   if it cannot be loaded (e.g. due to missing dependencies)
+   -> report dlerror
+    open question: which error should be reported if all dlloaders fail
+    or if a specific module type can only be loaded by one of them, how report its dlerror?
+   Also report dlerror() for dlclose and dlsym if available
+ - Make sure that the dependency_libs of a dlpreopened module won't be loaded.
+
+ - Fix mdemo failures on mingw.
+
+ - Fix the last memleak.  Reported by Jeff Squyres <jsquyres@lam-mpi.org>.
+
+ - Fix LTDL_CONVENIENCE.  Reported by Bob Friesenhahn
+   and Patrick Welche <prlw1@newn.cam.ac.uk>.
+
+
+1.3. libtoolize
+---------------
+
+* Rewrite the func_copy_* functions so that instead of forking 2 tar
+  processes per copied file, a list of files to copy is built and all
+  files copied with a single pair of tar processes.
+
+* Write test case that adds libtool macros to aclocal.m4.
+
+
+2. In the future
+================
+
+2.1. Documentation
+------------------
+
+* Need to finalize the documentation, and give a specification of
+  `.la' files so that people can depend on their format.  This would be
+  a good thing to put before the maintainance notes.
+
+* Document the installed `libtool' and its limitations clearly (maybe implement
+  --disable-script-install as well).  Or, even better, remove its limitations.
+
+* Platform notes redo.
+
+2.2. test suite
+---------------
+
+* Rewrite the whole thing in Autotest.  This will enable us to remove
+  all the tests/*demo noise, and duplication; and thus speed up bootstrap
+  and make writing new tests a whole lot more pleasant.
+
+* We should include tests with reloadable objects in the testsuite.
+
+* Write a test case for linkage with gnu ld scripts (per 2004-08-25 patch
+  from Paolo Bonzini).
+
+* Test everything:
+    - cross compile
+    - dirs with ~
+    - multiple input files
+
+2.3. libtool
+------------
+
+* Fix cross-compiling.
+
+* Fix threads.
+
+* Support multilibbing.
+
+* If not cross-compiling, have the static flag test run the resulting
+  binary to make sure everything works.
+
+* Another form of convenience library is to have undocumented utility
+  libraries, where only the shared version is installed.
+
+* We could use libtool object convenience libraries that resolve
+  symbols to be included in a libtool archive.  This would require some
+  sort of -whole-archive option, as well.
+
+* Currently, convenience libraries (.al) are built from .lo objects,
+  except when --disable-shared.  When we can build both shared and
+  static libraries, we should probably create a .al out of .lo objects
+  and also a .a out of .o objects.  The .al would only be used to create
+  shared libraries, whereas the .a would be used for creating static
+  libraries and programs.  We could also explicitly support `empty'
+  convenience libraries, that behave as macros that expand to a set of
+  -Rs, -Ls and -ls switches.
+
+* Audit use of object names so we can allow `$' not only within
+  source file names.  Necessary especially for java.
+
+* We could introduce a mechanism to allow for soname rewriting, to
+  ease multi-libc support.  Installers could specify a prefix, suffix or
+  sed command to modify the soname, and libtool would create the
+  corresponding link.  This would allow for rebuilding a library with
+  the same version number, but depending on different versions of libc,
+  for example.  In the future, we might even have an option to encode
+  the sonames of all dependencies of a library into its soname.
+
+* Look again at a binary C libtool, or byte-compiled libtool to improve
+  speed.
+
+* Generate some "platform specific" shell functions with config.status,
+  for example, there is no need to have the C source code for the
+  wrapper script on non-windows platforms, this will make the generated
+  libtool script smaller and easier to follow, maybe a little faster
+  too?
+
+* Audit the GCJ tag section in libtool.m4.
+
+* Add caching mechanism.  Look at `libtool-cache' from Robert Ögren.
+
+
+2.4. libtool autoconf macros
+----------------------------
+
+* Sort out the macro mess in libtool.m4.  We've started this already
+  by refactoring chunks into separate files, but I never did completely
+  untangle the mess of macros imported from ltconfig.
+
+* The definitions for LT_SYS_MODULE_EXT, LT_SYS_MODULE_PATH and
+  LT_SYS_DLSEARCH_PATH  should not rely on the _LT_SYS_DYNAMIC_LINKER
+  macro.  This involves moving the code which sets the variables
+  library_names_spec, shlibpath_var and sys_lib_dlsearch_path_spec from
+  into a separate macro, and AC_REQUIRING the newly extracted macro in the
+  respective ltdl.m4 macros.
+
+2.5. libtool automake integration
+---------------------------------
+
+* Unify locks between libtool and compile.
+
+* Fix relinking.
+
+2.6. libltdl
+------------
+
+* Finish the rewrite of the core libltdl.  The loaders are fine, and
+  the outlying code is now good.  Ralf is starting to pick away at a lot
+  of the remaining nasties already, but the code for finding .la/.so files
+  and reading/loading them could use a lot more improvement.
+
+* I think we could factor out a little path management support module
+  from existing libltdl.  This would be useful for M4 at least -- keeping
+  track of FOO_PATH environment contents, searching for files in paths
+  etc.
+
+* Try to find a work-around for -[all-]static and libltdl on platforms
+  that will fail to find dlopening functions in this case.  Maybe
+  creating an alternate libltdl that provides only for dlpreopening, or
+  creating an additional static library to provide dummy implementations
+  of the functions that can't be linked statically.  This could hardly
+  be made completely transparent, though.
+
+* In conjunction with above, fix the failures on *BSD when linked to
+  static libc.  Reported by Guilhem Lavaux <guilhem@kaffe.org>.
+
+* Add i18n strings to libltdl, ensuring that package developers can
+  ignore any i18n when they libtoolize.
+
+2.7. win32 support
+------------------
+
+* Arrange that EXEEXT suffixes are stripped from wrapper script names
+  only when needed, and that a timestamp file or a wrapper program is
+  created with the EXEEXT suffix, so that `make' doesn't build it every
+  time.
+
+* Figure out how to use data items in dlls with win32.
+  The difficult part is compiling each object which will be linked with an
+  import lib differently than if it will be linked with a static lib.  This
+  will almost definitely require that automake pass some hints about linkage
+  in to each object compilation line.
+
+* jeffdb@goodnet.com writes:
+  all you need to do for mutually dependent .dll's is to create an implib from
+  a .def file so it appears that we might need to detect and handle mutual
+  dependencies specially on win32 =(O|
+
+* QoI for file name and path conversion functions. Currently, these are
+  implemented as MxN different functions; this has quadratic complexity. If
+  possible, it would be preferred to implement then as M+N functions.  However:
+    http://lists.gnu.org/archive/html/libtool-patches/2010-08/msg00224.html
+    The main issue is you don't know what the "native" (e.g. "central")
+    path-type is; e.g. "from-X (to what?)" and "(from what?) to-Y". Right
+    now there are only four "platforms" involved: *nix, mingw, msys, and
+    cygwin.  That's actually the break-even point, given the vagaries and
+    optimizations involved in these particular four platforms.
+
+    We have exactly five basic file name conversion functions (not counting
+    the wrappers that handle paths). For a non-quadratic M+N (from-X|to-Y)
+    solution, we'd need, I think, the same number of conversion functions: brute
+    force suggests nine (four to_*, four from_*, plus the noop), but then many
+    of the from_* and to_* would actually BE noop.
+
+    I'm assuming here that the "central" path-type is implicitly some sort of
+    unixish -- maybe cyg, maybe msys, maybe unix -- path-type.  The issue is
+    that each of the five conversion functions use a different TOOL to perform
+    the conversion, with different syntax.  So, trying to combine, e.g.
+      msys_to_mingw
+      cygwin_to_mingw
+      unix_to_mingw
+    into an all-encompassing "central_unixish_to_mingw" would require additional
+    m4 magic to basically replace the guts depending on whether $build was msys,
+    cygwin, or unix.  Worse, you can't really do a set of
+    {msys|cygwin|unix}_to_central_unixish that isn't simply a no-op -- because
+    (A) they already are all unixish, and (B) what tool would you use? How would
+    the later to_mingw function "know" how to covert this new representation to
+    mingw.  So, {msys|cygwin|unix}_to_central_unixish would simply be a no-op
+    and central_unixish_to_mingw would still do all the work (with its guts
+    customized based on $build).
+
+    For more reasonable cross environments (e.g. linux-gnu->some_embedded) I
+    think you could probably work out a general M+N scheme, since most embedded
+    $hosts aren't as strange as the win32 variants -- even VxWorks and INTEGRITY
+    have basic, unix-like file systems (although INTEGRITY does have multiple
+    roots). Aggressive use of the m4 function_replace machinery WOULD be
+    appropriate for /these/ conversion functions.  OTOH...(a) you can't run the
+    $host apps on $build anyway, in these embedded situations. At best you'd use
+    $TARGETSHELL and "run" them via a remote connection, and (b) they don't use
+    the C wrapper!
+
+    So...I don't think it makes much difference *right now* in the amount of
+    code required, or the number of functions implemented. At some point in the
+    future we might want to generalize to an M+N scheme.  For the existing win32
+    $hosts, all of the funtionality would be on "one side" of the 2-step
+    conversion; the "other side" would be noop.  But we won't worry about the
+    implicit quadratic complexity of the existing scheme for now.
+
+3. Wish List
+============
+
+* Maybe implement full support for other orthogonal library types
+  (libhello_g, libhello_p, 64 vs 32-bit ABI's, etc).  Make these types
+  configurable.
+
+* Perhaps the use of libltdl could be made cleaner by allowing
+  registration of hook functions to call at various points.  This would
+  hopefully free the user from having to maintain a parallel module
+  list with user data.  This would likely involve being able to carry
+  additional per user module data in the lt_dlmodule structure -- perhaps
+  in the form of an associative array keyed by user name?
+
+* Figure out how to make pkg-config aware of the information libtool
+  knows about libraries and their dependencies, and send a patch.
+
+* Generate a libtool.m4 from a bunch of individual files, one per
+  platform, to make the job of a "platform maintainer" easier and make
+  it easier to add new platforms.
+
+-- 
+  Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+  Written by Gary V. Vaughan, 2004
+
+  This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
+
+Local Variables:
+mode: text
+fill-column: 72
+End:
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..adf2663
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,994 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_PROG_CC_C_O
+# --------------
+# Like AC_PROG_CC_C_O, but changed for automake.
+AC_DEFUN([AM_PROG_CC_C_O],
+[AC_REQUIRE([AC_PROG_CC_C_O])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+dnl Make sure AC_PROG_CC is never called again, or it will override our
+dnl setting of CC.
+m4_define([AC_PROG_CC],
+          [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([libltdl/m4/argz.m4])
+m4_include([libltdl/m4/autobuild.m4])
+m4_include([libltdl/m4/libtool.m4])
+m4_include([libltdl/m4/ltdl.m4])
+m4_include([libltdl/m4/ltoptions.m4])
+m4_include([libltdl/m4/ltsugar.m4])
+m4_include([libltdl/m4/ltversion.m4])
+m4_include([libltdl/m4/lt~obsolete.m4])
diff --git a/bootstrap b/bootstrap
new file mode 100755
index 0000000..78b4d30
--- /dev/null
+++ b/bootstrap
@@ -0,0 +1,189 @@
+#! /bin/sh
+# bootstrap -- Helps bootstrapping libtool, when checked out from repository.
+#
+#   Copyright (C) 2003, 2004, 2005, 2006, 2009, 2010 Free Software
+#   Foundation, Inc,
+#   Mritten by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Exit upon failure.
+set -e
+
+# It is okay for the bootstrap process to require unreleased autoconf
+# or automake, as long as any released libtool will work with at least
+# the newest stable versions of each.  Generally, newer versions offer
+# better features, and configure.ac documents oldest version of each
+# required for bootstrap (AC_PREREQ, and AM_INIT_AUTOMAKE).
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+: ${AUTORECONF=autoreconf}
+: ${AUTOCONF=autoconf}
+: ${AUTOMAKE=automake}
+: ${AUTOM4TE=autom4te}
+: ${MAKE=make}
+: ${GREP=grep}
+: ${EGREP=egrep}
+: ${FGREP=fgrep}
+: ${SED=sed}
+: ${LN_S='ln -s'}
+: ${MAKEINFO=makeinfo}
+
+case $1 in
+--help|-h*)
+  cat <<EOF
+`echo $0 | sed 's,^.*/,,g'`: This script is designed to bootstrap a fresh repository checkout
+of Libtool.  Useful environment variable settings:
+  reconfdirs='. libltdl'     Do not bootstrap the old test suite.
+EOF
+  exit
+  ;;
+esac
+
+test -f ./configure.ac || {
+  echo "bootstrap: can't find ./configure.ac, please rerun from top_srcdir"
+  exit 1
+}
+
+
+# Extract auxdir and m4dir from configure.ac:
+lt_tab='	'
+my_sed_traces='s,#.*$,,; s,^dnl .*$,,; s, dnl .*$,,;
+	/AC_CONFIG_AUX_DIR[^_]/  {
+	    s,^.*AC_CONFIG_AUX_DIR([[ '"$lt_tab"']*\([^])]*\).*$,auxdir=\1,; p;
+	};
+	/AC_CONFIG_MACRO_DIR/   {
+	    s,^.*AC_CONFIG_MACRO_DIR([[ '"$lt_tab"']*\([^])]*\).*$,m4dir=\1,; p;
+	};
+	d;'
+eval `cat configure.ac 2>/dev/null | $SED "$my_sed_traces"`
+
+
+# Upgrade caveat:
+cat <<'EOF'
+WARNING: If bootstrapping with this script fails, it may be due to an
+WARNING: incompatible installed `libtool.m4' being pulled in to
+WARNING: `aclocal.m4'.  The best way to work around such a problem is to
+WARNING: uninstall your system libtool files, or failing that, overwrite
+WARNING: them with all m4 file as shipped with this distribution (except
+WARNING: `lt~obsolete.m4').  After that, retry this bootstrap.
+EOF
+
+find . -depth \( -name autom4te.cache -o -name libtool \) -print \
+  | grep -v '{arch}' \
+  | xargs rm -rf
+
+# Delete stale files from previous libtool versions.
+rm -f acinclude.m4 libltdl/config.h
+
+for file in argz.c lt__dirent.c lt__strl.c; do
+  rm -f $file
+done
+
+if test -z "$reconfdirs"; then
+  reconfdirs=". libltdl `ls -1d tests/*demo tests/*demo[0-9]`"
+fi
+
+# Extract the package name and version number from configure.ac:
+set dummy `$SED -n '
+    /AC_INIT/{
+	s/[][,()]/ /g
+	s/ GNU / /
+	p
+    }' configure.ac`
+shift
+PACKAGE=`echo "$2" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+PACKAGE_NAME=$2
+PACKAGE_URL=
+if grep 'AC_INIT.*GNU' configure.ac >/dev/null; then
+  PACKAGE_NAME="GNU $PACKAGE_NAME"
+  PACKAGE_URL="http://www.gnu.org/software/$PACKAGE/"
+fi
+VERSION=$3
+
+# Whip up a dirty Makefile:
+makes='Makefile.am libltdl/Makefile.inc'
+rm -f Makefile
+$SED '/^if /,/^endif$/d;/^else$/,/^endif$/d;/^include /d' $makes > Makefile
+
+# Building distributed files from configure is bad for automake, so we
+# generate them here, and have Makefile rules to keep them up to date.
+# We don't have all the substitution values to build ltmain.sh from this
+# script yet, but we need config/ltmain.sh for the libtool commands in
+# configure, and ltversion.m4 to generate configure in the first place:
+rm -f $auxdir/ltmain.sh $m4dir/ltversion.m4
+
+$MAKE ./$auxdir/ltmain.sh ./$m4dir/ltversion.m4 \
+    ./libtoolize.in ./tests/defs.in ./tests/package.m4 \
+    ./tests/testsuite ./libltdl/Makefile.am ./doc/notes.txt \
+    srcdir=. top_srcdir=. PACKAGE="$PACKAGE" VERSION="$VERSION" \
+    PACKAGE_NAME="$PACKAGE_NAME" PACKAGE_URL="$PACKAGE_URL" \
+    PACKAGE_BUGREPORT="bug-$PACKAGE@gnu.org" M4SH="$AUTOM4TE --language=m4sh" \
+    AUTOTEST="$AUTOM4TE --language=autotest" SED="$SED" MAKEINFO="$MAKEINFO" \
+    GREP="$GREP" FGREP="$FGREP" EGREP="$EGREP" LN_S="$LN_S"
+
+rm -f Makefile
+
+# Make a dummy libtoolize script for autoreconf:
+cat > $auxdir/libtoolize <<'EOF'
+#! /bin/sh
+# This is a dummy file for bootstrapping libtool.
+echo "$0: Bootstrap detected, no files installed." | sed 's,^.*/,,g'
+exit 0
+EOF
+chmod 755 $auxdir/libtoolize
+
+# Running the installed `libtoolize' will trash the local (newer) libtool.m4
+# among others.  Call the dummy script we made earlier.
+LIBTOOLIZE=`pwd`/$auxdir/libtoolize
+export LIBTOOLIZE
+
+for sub in $reconfdirs; do
+  $AUTORECONF --force --verbose --install $sub
+done
+
+# Autoheader valiantly tries to prevent needless reconfigurations by
+# not changing the timestamp of config-h.in unless the file contents
+# are updated.  Unfortunately config-h.in depends on aclocal.m4 which
+# *is* updated, so running 'libtoolize --ltdl=. && configure && make'
+# causes autoheader to be called... undesireable for users that do not
+# have it!  Fudge the timestamp to prevent that:
+sleep 2 && touch libltdl/config-h.in
+
+# Remove our dummy libtoolize
+rm -f $auxdir/libtoolize
+
+# These files can cause an infinite configure loop if left behind.
+rm -f Makefile libltdl/Makefile libtool vcl.tmp
+
+# This file is misgenerated earlier in bootstrap to satisfy automake 1.9.1
+# and earlier, but has a new enough timestamp to not be updated.  Force it
+# to be regenerated at make-time with proper substitutions in place:
+touch $auxdir/ltmain.m4sh
+
+for macro in LT_INIT AC_PROG_LIBTOOL AM_PROG_LIBTOOL; do
+  if grep $macro aclocal.m4 libltdl/aclocal.m4; then
+    echo "Bogus $macro macro contents in an aclocal.m4 file." >&2
+    exit 1
+  else :; fi
+done
+
+exit 0
diff --git a/config-h.in b/config-h.in
new file mode 100644
index 0000000..862243c
--- /dev/null
+++ b/config-h.in
@@ -0,0 +1,181 @@
+/* config-h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you have the `argz_add' function. */
+#undef HAVE_ARGZ_ADD
+
+/* Define to 1 if you have the `argz_append' function. */
+#undef HAVE_ARGZ_APPEND
+
+/* Define to 1 if you have the `argz_count' function. */
+#undef HAVE_ARGZ_COUNT
+
+/* Define to 1 if you have the `argz_create_sep' function. */
+#undef HAVE_ARGZ_CREATE_SEP
+
+/* Define to 1 if you have the <argz.h> header file. */
+#undef HAVE_ARGZ_H
+
+/* Define to 1 if you have the `argz_insert' function. */
+#undef HAVE_ARGZ_INSERT
+
+/* Define to 1 if you have the `argz_next' function. */
+#undef HAVE_ARGZ_NEXT
+
+/* Define to 1 if you have the `argz_stringify' function. */
+#undef HAVE_ARGZ_STRINGIFY
+
+/* Define to 1 if you have the `closedir' function. */
+#undef HAVE_CLOSEDIR
+
+/* Define to 1 if you have the declaration of `cygwin_conv_path', and to 0 if
+   you don't. */
+#undef HAVE_DECL_CYGWIN_CONV_PATH
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define if you have the GNU dld library. */
+#undef HAVE_DLD
+
+/* Define to 1 if you have the <dld.h> header file. */
+#undef HAVE_DLD_H
+
+/* Define to 1 if you have the `dlerror' function. */
+#undef HAVE_DLERROR
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <dl.h> header file. */
+#undef HAVE_DL_H
+
+/* Define if you have the _dyld_func_lookup function. */
+#undef HAVE_DYLD
+
+/* Define to 1 if the system has the type `error_t'. */
+#undef HAVE_ERROR_T
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if you have the libdl library or equivalent. */
+#undef HAVE_LIBDL
+
+/* Define if libdlloader will be built on this platform */
+#undef HAVE_LIBDLLOADER
+
+/* Define to 1 if you have the <mach-o/dyld.h> header file. */
+#undef HAVE_MACH_O_DYLD_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `opendir' function. */
+#undef HAVE_OPENDIR
+
+/* Define if libtool can extract symbol lists from object files. */
+#undef HAVE_PRELOADED_SYMBOLS
+
+/* Define to 1 if you have the `readdir' function. */
+#undef HAVE_READDIR
+
+/* Define if you have the shl_load function. */
+#undef HAVE_SHL_LOAD
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcat' function. */
+#undef HAVE_STRLCAT
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if you have the <sys/dl.h> header file. */
+#undef HAVE_SYS_DL_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* This value is set to 1 to indicate that the system argz facility works */
+#undef HAVE_WORKING_ARGZ
+
+/* Define if the OS needs help to load dependent libraries for dlopen(). */
+#undef LTDL_DLOPEN_DEPLIBS
+
+/* Define to the system default library search path. */
+#undef LT_DLSEARCH_PATH
+
+/* The archive extension */
+#undef LT_LIBEXT
+
+/* The archive prefix */
+#undef LT_LIBPREFIX
+
+/* Define to the extension used for runtime loadable modules, say, ".so". */
+#undef LT_MODULE_EXT
+
+/* Define to the name of the environment variable that determines the run-time
+   module search path. */
+#undef LT_MODULE_PATH_VAR
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
+/* Define to the shared library suffix, say, ".dylib". */
+#undef LT_SHARED_EXT
+
+/* Define if dlsym() requires a leading underscore in symbol names. */
+#undef NEED_USCORE
+
+/* Define to 1 if your C compiler doesn't accept -c and -o together. */
+#undef NO_MINUS_C_MINUS_O
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
+
+/* Define so that glibc/gnulib argp.h does not typedef error_t. */
+#undef __error_t_defined
+
+/* Define to a type to use for `error_t' if it is not otherwise available. */
+#undef error_t
diff --git a/configure b/configure
new file mode 100755
index 0000000..a1ef3e3
--- /dev/null
+++ b/configure
@@ -0,0 +1,31085 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for GNU Libtool 2.4.2.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+lt_ltdl_dir='libltdl'
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+lt_dlopen_dir="$lt_ltdl_dir"; lt_libobj_prefix="$lt_ltdl_dir/"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='GNU Libtool'
+PACKAGE_TARNAME='libtool'
+PACKAGE_VERSION='2.4.2'
+PACKAGE_STRING='GNU Libtool 2.4.2'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL='http://www.gnu.org/software/libtool/'
+
+ac_unique_file="libtoolize.in"
+ac_config_libobj_dir=libltdl
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+HELP2MAN
+ORDER
+HAVE_RC_FALSE
+HAVE_RC_TRUE
+HAVE_GCJ_FALSE
+HAVE_GCJ_TRUE
+HAVE_FC_FALSE
+HAVE_FC_TRUE
+HAVE_F77_FALSE
+HAVE_F77_TRUE
+HAVE_CXX_FALSE
+HAVE_CXX_TRUE
+to_tool_file_cmd
+to_host_file_cmd
+RC
+GCJFLAGS
+GCJ
+GOC
+ac_ct_FC
+FCFLAGS
+FC
+ac_ct_F77
+FFLAGS
+F77
+CXXCPP
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+ac_ct_CXX
+CXXFLAGS
+CXX
+LTDLOPEN
+LT_CONFIG_H
+CONVENIENCE_LTDL_FALSE
+CONVENIENCE_LTDL_TRUE
+INSTALL_LTDL_FALSE
+INSTALL_LTDL_TRUE
+ARGZ_H
+LIBOBJS
+sys_symbol_underscore
+LIBADD_DL
+LT_DLPREOPEN
+LIBADD_DLD_LINK
+LIBADD_SHL_LOAD
+LIBADD_DLOPEN
+LT_DLLOADERS
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+DIST_MAKEFILE_LIST
+CONF_SUBDIRS
+pkgdatadir
+aclocaldir
+CONFIG_STATUS_DEPENDENCIES
+M4SH
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+package_revision
+TIMESTAMP
+LASTRELEASE
+AUTOTEST
+AUTOM4TE
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_ltdl_install
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+CXX
+CXXFLAGS
+CCC
+CXXCPP
+F77
+FFLAGS
+FC
+FCFLAGS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures GNU Libtool 2.4.2 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/libtool]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of GNU Libtool 2.4.2:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-ltdl-install  do not install libltdl
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-ltdl-install   install libltdl
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  CXX         C++ compiler command
+  CXXFLAGS    C++ compiler flags
+  CXXCPP      C++ preprocessor
+  F77         Fortran 77 compiler command
+  FFLAGS      Fortran 77 compiler flags
+  FC          Fortran compiler command
+  FCFLAGS     Fortran compiler flags
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU Libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+GNU Libtool configure 2.4.2
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  as_decl_name=`echo $2|sed 's/ *(.*//'`
+  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+  (void) $as_decl_use;
+#else
+  (void) $as_decl_name;
+#endif
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_decl
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+
+# ac_fn_f77_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_f77_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_f77_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_f77_try_compile
+
+# ac_fn_f77_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_f77_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_f77_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_f77_try_link
+
+# ac_fn_fc_try_compile LINENO
+# ---------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_fc_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_fc_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_fc_try_compile
+
+# ac_fn_fc_try_link LINENO
+# ------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_fc_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_fc_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_fc_try_link
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by GNU Libtool $as_me 2.4.2, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_config_headers="$ac_config_headers config.h:config-h.in"
+
+
+
+
+
+
+
+
+
+ac_aux_dir=
+for ac_dir in libltdl/config "$srcdir"/libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in libltdl/config \"$srcdir\"/libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+
+
+## ------------------------ ##
+## Autotest initialisation. ##
+## ------------------------ ##
+
+ac_config_commands="$ac_config_commands tests/atconfig"
+
+AUTOM4TE=${AUTOM4TE=autom4te}
+
+AUTOTEST='$(AUTOM4TE) --language=autotest'
+
+
+
+## ---------------------------------------- ##
+## Display a configure time version banner. ##
+## ---------------------------------------- ##
+
+# Calculating the previous version is somewhat involved, so do it once
+# here, and SUBST the result for the maintainer release rules.  The
+# versioning scheme we use is described here:
+#	http://www.gnu.org/software/libtool/contribute.html
+
+# First we break the version number up into its constituent parts.
+lt_major=`echo "2.4.2" | sed 's,\..*$,,g'`
+lt_minor=`echo "2.4.2" | sed 's,^[0-9]*\.\([0-9]*\).*$,\1,'`
+lt_micro=`echo "2.4.2" | sed 's,^[0-9]*\.[0-9]*\(\.[0-9]*\).*$,\1,'`
+lt_alpha=`echo "2.4.2" | sed 's,^[0-9.]*,,'`
+
+test "$lt_minor" = "2.4.2" && lt_minor=0
+test "$lt_micro" = "2.4.2" && lt_micro=""
+
+# Then we try to work out what the release before this one would have been
+# numbered.  The only time we come unstuck is when this is the first release
+# from a stable branch (lt_micro=lt_alpha=""), so LASTRELEASE is the last
+# release from the old stable branch, and we don't know what version that
+# was, so leave it unset so that the Makefile can complain.
+case $lt_alpha in
+  [ab])
+    case $lt_micro in
+      .[01])
+	LASTRELEASE="$lt_major.$lt_minor" ;;
+      *)
+	LASTRELEASE="$lt_major.$lt_minor$lt_micro" ;;
+    esac
+    ;;
+  [cegikmoqsuwy])
+    LASTRELEASE=`echo "2.4.2" | tr 'c-y' 'b-w'` ;;
+  [dfhjlnprtvxz])
+    LASTRELEASE=`echo "2.4.2" | tr 'd-z' 'b-x'` ;;
+  *) # No lt_alpha component
+    case $lt_micro in
+      .0)
+	LASTRELEASE="" ;;
+      .1)
+        LASTRELEASE="$lt_major.$lt_minor" ;;
+      .*)
+	lt_micro_value=`echo $lt_micro | sed 's,^\.,,'`
+	LASTRELEASE="$lt_major.$lt_minor.`expr $lt_micro_value - 1`" ;;
+      *)
+	LASTRELEASE="" ;;
+    esac
+    ;;
+esac
+
+
+# This is a sanity check so we can see which version is used in bug reports.
+# It is assumed that we only want to see the date extension for cvs libtool
+# versions (i.e. "odd" letters) and not actual alpha releases.
+TIMESTAMP=`${CONFIG_SHELL} ${ac_aux_dir}/mkstamp ${srcdir}`
+package_revision=`( set $TIMESTAMP; echo $1; )`
+case $lt_alpha in
+  ""|[bdfhjlnprtvxz])
+    TIMESTAMP=
+    ;;
+esac
+timestamp_string="${TIMESTAMP:+ (Build:$TIMESTAMP)}"
+sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Configuring libtool$timestamp_string 2.4.2 ##
+_ASBOX
+echo
+
+
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libtool'
+ VERSION='2.4.2'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ------------------------- ##
+## Autobuild initialisation. ##
+## ------------------------- ##
+
+# You can set autobuild_mode at configure time to specify a "unique"
+# string for this build.
+: ${autobuild_mode=default}
+AB_VERSION="2.4.2 ($TIMESTAMP)"
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+
+
+
+  if test -z "$AB_PACKAGE"; then
+    AB_PACKAGE=${PACKAGE_NAME:-$PACKAGE}
+  fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild project... $AB_PACKAGE" >&5
+$as_echo "$as_me: autobuild project... $AB_PACKAGE" >&6;}
+
+  if test -z "$AB_VERSION"; then
+    AB_VERSION=${PACKAGE_VERSION:-$VERSION}
+  fi
+  { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild revision... $AB_VERSION" >&5
+$as_echo "$as_me: autobuild revision... $AB_VERSION" >&6;}
+
+  hostname=`hostname`
+  if test "$hostname"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild hostname... $hostname" >&5
+$as_echo "$as_me: autobuild hostname... $hostname" >&6;}
+  fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild mode... $autobuild_mode" >&5
+$as_echo "$as_me: autobuild mode... $autobuild_mode" >&6;}
+
+  date=`TZ=UTC0 date +%Y%m%dT%H%M%SZ`
+  if test "$?" != 0; then
+    date=`date`
+  fi
+  if test "$date"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild timestamp... $date" >&5
+$as_echo "$as_me: autobuild timestamp... $date" >&6;}
+  fi
+
+
+
+M4SH='$(AUTOM4TE) --language=m4sh'
+
+
+CONFIG_STATUS_DEPENDENCIES='$(top_srcdir)/ChangeLog'
+
+
+
+## ------------------------------- ##
+## Libtool specific configuration. ##
+## ------------------------------- ##
+
+aclocaldir="\${datadir}/aclocal"
+
+pkgdatadir="\${datadir}/$PACKAGE"
+
+
+# Check whether --enable-ltdl-install was given.
+if test "${enable_ltdl_install+set}" = set; then :
+  enableval=$enable_ltdl_install;
+fi
+
+if test x"${enable_ltdl_install+set}" != xset; then
+  enable_ltdl_install=yes
+fi
+
+# All subdirectories that are configured on demand, but that must be
+# included in the distribution.
+CONF_SUBDIRS="tests/cdemo tests/demo tests/depdemo tests/f77demo tests/fcdemo \
+	tests/mdemo tests/mdemo2 tests/pdemo tests/tagdemo"
+
+
+DIST_MAKEFILE_LIST=
+for dir in $CONF_SUBDIRS; do
+  DIST_MAKEFILE_LIST="${DIST_MAKEFILE_LIST}$dir/Makefile "
+done
+
+
+
+## ---------------- ##
+## compiler checks. ##
+## ---------------- ##
+
+# Need to be sure that we have a working C compiler, otherwise even with
+# a good C compiler: if the following C++ tests fail, the whole libtool
+# build fails!
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+if test "x$CC" != xcc; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
+$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
+$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
+fi
+set dummy $CC; ac_cc=`$as_echo "$2" |
+		      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+rm -f conftest2.*
+if { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } &&
+   test -f conftest2.$ac_objext && { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; };
+then
+  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+  if test "x$CC" != xcc; then
+    # Test first that cc exists at all.
+    if { ac_try='cc -c conftest.$ac_ext >&5'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+      ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+      rm -f conftest2.*
+      if { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } &&
+	 test -f conftest2.$ac_objext && { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; };
+      then
+	# cc works too.
+	:
+      else
+	# cc exists but doesn't like -o.
+	eval ac_cv_prog_cc_${ac_cc}_c_o=no
+      fi
+    fi
+  fi
+else
+  eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f core conftest*
+
+fi
+if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
+
+fi
+
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
+   # Losing compiler, so override with the script.
+   # FIXME: It is wrong to rewrite CC.
+   # But if we don't then we get into trouble of one sort or another.
+   # A longer-term fix would be to have automake use am__CC in this case,
+   # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+   CC="$am_aux_dir/compile $CC"
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+enable_dlopen=yes
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+  ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which extension is used for runtime loadable modules" >&5
+$as_echo_n "checking which extension is used for runtime loadable modules... " >&6; }
+if ${libltdl_cv_shlibext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+module=yes
+eval libltdl_cv_shlibext=$shrext_cmds
+module=no
+eval libltdl_cv_shrext=$shrext_cmds
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libltdl_cv_shlibext" >&5
+$as_echo "$libltdl_cv_shlibext" >&6; }
+if test -n "$libltdl_cv_shlibext"; then
+
+cat >>confdefs.h <<_ACEOF
+#define LT_MODULE_EXT "$libltdl_cv_shlibext"
+_ACEOF
+
+fi
+if test "$libltdl_cv_shrext" != "$libltdl_cv_shlibext"; then
+
+cat >>confdefs.h <<_ACEOF
+#define LT_SHARED_EXT "$libltdl_cv_shrext"
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which variable specifies run-time module search path" >&5
+$as_echo_n "checking which variable specifies run-time module search path... " >&6; }
+if ${lt_cv_module_path_var+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_module_path_var="$shlibpath_var"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_module_path_var" >&5
+$as_echo "$lt_cv_module_path_var" >&6; }
+if test -n "$lt_cv_module_path_var"; then
+
+cat >>confdefs.h <<_ACEOF
+#define LT_MODULE_PATH_VAR "$lt_cv_module_path_var"
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for the default library search path" >&5
+$as_echo_n "checking for the default library search path... " >&6; }
+if ${lt_cv_sys_dlsearch_path+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_dlsearch_path" >&5
+$as_echo "$lt_cv_sys_dlsearch_path" >&6; }
+if test -n "$lt_cv_sys_dlsearch_path"; then
+  sys_dlsearch_path=
+  for dir in $lt_cv_sys_dlsearch_path; do
+    if test -z "$sys_dlsearch_path"; then
+      sys_dlsearch_path="$dir"
+    else
+      sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir"
+    fi
+  done
+
+cat >>confdefs.h <<_ACEOF
+#define LT_DLSEARCH_PATH "$sys_dlsearch_path"
+_ACEOF
+
+fi
+
+
+LT_DLLOADERS=
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+LIBADD_DLOPEN=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
+$as_echo_n "checking for library containing dlopen... " >&6; }
+if ${ac_cv_search_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_dlopen=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_dlopen+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_dlopen+:} false; then :
+
+else
+  ac_cv_search_dlopen=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
+$as_echo "$ac_cv_search_dlopen" >&6; }
+ac_res=$ac_cv_search_dlopen
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+$as_echo "#define HAVE_LIBDL 1" >>confdefs.h
+
+	if test "$ac_cv_search_dlopen" != "none required" ; then
+	  LIBADD_DLOPEN="-ldl"
+	fi
+	libltdl_cv_lib_dl_dlopen="yes"
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if HAVE_DLFCN_H
+#  include <dlfcn.h>
+#endif
+
+int
+main ()
+{
+dlopen(0, 0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+$as_echo "#define HAVE_LIBDL 1" >>confdefs.h
+
+	    libltdl_cv_func_dlopen="yes"
+	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+
+$as_echo "#define HAVE_LIBDL 1" >>confdefs.h
+
+	        LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes"
+		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"
+fi
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+
+if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes
+then
+  lt_save_LIBS="$LIBS"
+  LIBS="$LIBS $LIBADD_DLOPEN"
+  for ac_func in dlerror
+do :
+  ac_fn_c_check_func "$LINENO" "dlerror" "ac_cv_func_dlerror"
+if test "x$ac_cv_func_dlerror" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLERROR 1
+_ACEOF
+
+fi
+done
+
+  LIBS="$lt_save_LIBS"
+fi
+
+
+LIBADD_SHL_LOAD=
+ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+
+$as_echo "#define HAVE_SHL_LOAD 1" >>confdefs.h
+
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+
+$as_echo "#define HAVE_SHL_LOAD 1" >>confdefs.h
+
+	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"
+	    LIBADD_SHL_LOAD="-ldld"
+fi
+
+fi
+
+
+
+case $host_os in
+darwin[1567].*)
+# We only want this for pre-Mac OS X 10.4.
+  ac_fn_c_check_func "$LINENO" "_dyld_func_lookup" "ac_cv_func__dyld_func_lookup"
+if test "x$ac_cv_func__dyld_func_lookup" = xyes; then :
+
+$as_echo "#define HAVE_DYLD 1" >>confdefs.h
+
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"
+fi
+
+  ;;
+beos*)
+  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la"
+  ;;
+cygwin* | mingw* | os2* | pw32*)
+  ac_fn_c_check_decl "$LINENO" "cygwin_conv_path" "ac_cv_have_decl_cygwin_conv_path" "#include <sys/cygwin.h>
+"
+if test "x$ac_cv_have_decl_cygwin_conv_path" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_CYGWIN_CONV_PATH $ac_have_decl
+_ACEOF
+
+  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la"
+  ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+
+$as_echo "#define HAVE_DLD 1" >>confdefs.h
+
+		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"
+fi
+
+
+
+
+LT_DLPREOPEN=
+if test -n "$LT_DLLOADERS"
+then
+  for lt_loader in $LT_DLLOADERS; do
+    LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader "
+  done
+
+$as_echo "#define HAVE_LIBDLLOADER 1" >>confdefs.h
+
+fi
+
+
+LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD"
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _ prefix in compiled symbols" >&5
+$as_echo_n "checking for _ prefix in compiled symbols... " >&6; }
+if ${lt_cv_sys_symbol_underscore+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_symbol_underscore=no
+  cat > conftest.$ac_ext <<_LT_EOF
+void nm_test_func(){}
+int main(){nm_test_func;return 0;}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    ac_nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$ac_nlist"; then
+      # See whether the symbols have a leading underscore.
+      if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
+        lt_cv_sys_symbol_underscore=yes
+      else
+        if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
+	  :
+        else
+	  echo "configure: cannot find nm_test_func in $ac_nlist" >&5
+        fi
+      fi
+    else
+      echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "configure: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  rm -rf conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_symbol_underscore" >&5
+$as_echo "$lt_cv_sys_symbol_underscore" >&6; }
+  sys_symbol_underscore=$lt_cv_sys_symbol_underscore
+
+
+if test x"$lt_cv_sys_symbol_underscore" = xyes; then
+  if test x"$libltdl_cv_func_dlopen" = xyes ||
+     test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we have to add an underscore for dlsym" >&5
+$as_echo_n "checking whether we have to add an underscore for dlsym... " >&6; }
+if ${libltdl_cv_need_uscore+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  libltdl_cv_need_uscore=unknown
+          save_LIBS="$LIBS"
+          LIBS="$LIBS $LIBADD_DLOPEN"
+	  if test "$cross_compiling" = yes; then :
+  libltdl_cv_need_uscore=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) libltdl_cv_need_uscore=no ;;
+      x$lt_dlneed_uscore) libltdl_cv_need_uscore=yes ;;
+      x$lt_dlunknown|x*)  ;;
+    esac
+  else :
+    # compilation failed
+
+  fi
+fi
+rm -fr conftest*
+
+	  LIBS="$save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libltdl_cv_need_uscore" >&5
+$as_echo "$libltdl_cv_need_uscore" >&6; }
+  fi
+fi
+
+if test x"$libltdl_cv_need_uscore" = xyes; then
+
+$as_echo "#define NEED_USCORE 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether deplibs are loaded by dlopen" >&5
+$as_echo_n "checking whether deplibs are loaded by dlopen... " >&6; }
+if ${lt_cv_sys_dlopen_deplibs+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # PORTME does your system automatically load deplibs for dlopen?
+  # or its logical equivalent (e.g. shl_load for HP-UX < 11)
+  # For now, we just catch OSes we know something about -- in the
+  # future, we'll try test this programmatically.
+  lt_cv_sys_dlopen_deplibs=unknown
+  case $host_os in
+  aix3*|aix4.1.*|aix4.2.*)
+    # Unknown whether this is true for these versions of AIX, but
+    # we want this `case' here to explicitly catch those versions.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  aix[4-9]*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  amigaos*)
+    case $host_cpu in
+    powerpc)
+      lt_cv_sys_dlopen_deplibs=no
+      ;;
+    esac
+    ;;
+  darwin*)
+    # Assuming the user has installed a libdl from somewhere, this is true
+    # If you are looking for one http://www.opendarwin.org/projects/dlcompat
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  freebsd* | dragonfly*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    # GNU and its variants, using gnu ld.so (Glibc)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  hpux10*|hpux11*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  interix*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  irix[12345]*|irix6.[01]*)
+    # Catch all versions of IRIX before 6.2, and indicate that we don't
+    # know how it worked for any of those versions.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  irix*)
+    # The case above catches anything before 6.2, and it's known that
+    # at 6.2 and later dlopen does load deplibs.
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  netbsd*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  openbsd*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  osf[1234]*)
+    # dlopen did load deplibs (at least at 4.x), but until the 5.x series,
+    # it did *not* use an RPATH in a shared library to find objects the
+    # library depends on, so we explicitly say `no'.
+    lt_cv_sys_dlopen_deplibs=no
+    ;;
+  osf5.0|osf5.0a|osf5.1)
+    # dlopen *does* load deplibs and with the right loader patch applied
+    # it even uses RPATH in a shared library to search for shared objects
+    # that the library depends on, but there's no easy way to know if that
+    # patch is installed.  Since this is the case, all we can really
+    # say is unknown -- it depends on the patch being installed.  If
+    # it is, this changes to `yes'.  Without it, it would be `no'.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  osf*)
+    # the two cases above should catch all versions of osf <= 5.1.  Read
+    # the comments above for what we know about them.
+    # At > 5.1, deplibs are loaded *and* any RPATH in a shared library
+    # is used to find them so we can finally say `yes'.
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  qnx*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  solaris*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    libltdl_cv_sys_dlopen_deplibs=yes
+    ;;
+  esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_dlopen_deplibs" >&5
+$as_echo "$lt_cv_sys_dlopen_deplibs" >&6; }
+if test "$lt_cv_sys_dlopen_deplibs" != yes; then
+
+$as_echo "#define LTDL_DLOPEN_DEPLIBS 1" >>confdefs.h
+
+fi
+
+:
+
+for ac_header in argz.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "argz.h" "ac_cv_header_argz_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_argz_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_ARGZ_H 1
+_ACEOF
+
+fi
+
+done
+
+
+ac_fn_c_check_type "$LINENO" "error_t" "ac_cv_type_error_t" "#if defined(HAVE_ARGZ_H)
+#  include <argz.h>
+#endif
+"
+if test "x$ac_cv_type_error_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_ERROR_T 1
+_ACEOF
+
+
+else
+
+$as_echo "#define error_t int" >>confdefs.h
+
+
+$as_echo "#define __error_t_defined 1" >>confdefs.h
+
+fi
+
+
+ARGZ_H=
+for ac_func in argz_add argz_append argz_count argz_create_sep argz_insert \
+	argz_next argz_stringify
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  ARGZ_H=argz.h; case " $LIBOBJS " in
+  *" argz.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS argz.$ac_objext"
+ ;;
+esac
+
+fi
+done
+
+
+if test -z "$ARGZ_H"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if argz actually works" >&5
+$as_echo_n "checking if argz actually works... " >&6; }
+if ${lt_cv_sys_argz_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host_os in #(
+	 *cygwin*)
+	   lt_cv_sys_argz_works=no
+	   if test "$cross_compiling" != no; then
+	     lt_cv_sys_argz_works="guessing no"
+	   else
+	     lt_sed_extract_leading_digits='s/^\([0-9\.]*\).*/\1/'
+	     save_IFS=$IFS
+	     IFS=-.
+	     set x `uname -r | sed -e "$lt_sed_extract_leading_digits"`
+	     IFS=$save_IFS
+	     lt_os_major=${2-0}
+	     lt_os_minor=${3-0}
+	     lt_os_micro=${4-0}
+	     if test "$lt_os_major" -gt 1 \
+		|| { test "$lt_os_major" -eq 1 \
+		  && { test "$lt_os_minor" -gt 5 \
+		    || { test "$lt_os_minor" -eq 5 \
+		      && test "$lt_os_micro" -gt 24; }; }; }; then
+	       lt_cv_sys_argz_works=yes
+	     fi
+	   fi
+	   ;; #(
+	 *) lt_cv_sys_argz_works=yes ;;
+	 esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_argz_works" >&5
+$as_echo "$lt_cv_sys_argz_works" >&6; }
+     if test "$lt_cv_sys_argz_works" = yes; then :
+
+$as_echo "#define HAVE_WORKING_ARGZ 1" >>confdefs.h
+
+else
+  ARGZ_H=argz.h
+        case " $LIBOBJS " in
+  *" argz.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS argz.$ac_objext"
+ ;;
+esac
+
+fi
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether libtool supports -dlopen/-dlpreopen" >&5
+$as_echo_n "checking whether libtool supports -dlopen/-dlpreopen... " >&6; }
+if ${libltdl_cv_preloaded_symbols+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$lt_cv_sys_global_symbol_pipe"; then
+    libltdl_cv_preloaded_symbols=yes
+  else
+    libltdl_cv_preloaded_symbols=no
+  fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libltdl_cv_preloaded_symbols" >&5
+$as_echo "$libltdl_cv_preloaded_symbols" >&6; }
+if test x"$libltdl_cv_preloaded_symbols" = xyes; then
+
+$as_echo "#define HAVE_PRELOADED_SYMBOLS 1" >>confdefs.h
+
+fi
+
+
+
+# Check whether --enable-ltdl-install was given.
+if test "${enable_ltdl_install+set}" = set; then :
+  enableval=$enable_ltdl_install;
+fi
+
+
+case ,${enable_ltdl_install},${enable_ltdl_convenience} in
+  *yes*) ;;
+  *) enable_ltdl_convenience=yes ;;
+esac
+
+ if test x"${enable_ltdl_install-no}" != xno; then
+  INSTALL_LTDL_TRUE=
+  INSTALL_LTDL_FALSE='#'
+else
+  INSTALL_LTDL_TRUE='#'
+  INSTALL_LTDL_FALSE=
+fi
+
+  if test x"${enable_ltdl_convenience-no}" != xno; then
+  CONVENIENCE_LTDL_TRUE=
+  CONVENIENCE_LTDL_FALSE='#'
+else
+  CONVENIENCE_LTDL_TRUE='#'
+  CONVENIENCE_LTDL_FALSE=
+fi
+
+
+
+
+
+
+# In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS
+# the user used.  This is so that ltdl.h can pick up the parent projects
+# config.h file, The first file in AC_CONFIG_HEADERS must contain the
+# definitions required by ltdl.c.
+# FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility).
+
+
+
+for ac_header in unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_func in closedir opendir readdir
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  case " $LIBOBJS " in
+  *" lt__dirent.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS lt__dirent.$ac_objext"
+ ;;
+esac
+
+fi
+done
+
+for ac_func in strlcat strlcpy
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  case " $LIBOBJS " in
+  *" lt__strl.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS lt__strl.$ac_objext"
+ ;;
+esac
+
+fi
+done
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_LIBEXT "$libext"
+_ACEOF
+
+
+name=
+eval "lt_libprefix=\"$libname_spec\""
+
+cat >>confdefs.h <<_ACEOF
+#define LT_LIBPREFIX "$lt_libprefix"
+_ACEOF
+
+
+name=ltdl
+eval "LTDLOPEN=\"$libname_spec\""
+
+
+
+# Enable all the language support we can
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+  if test -n "$CCC"; then
+    CXX=$CCC
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CXX" && break
+done
+
+  if test "x$ac_ct_CXX" = x; then
+    CXX="g++"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CXX=$ac_ct_CXX
+  fi
+fi
+
+  fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GXX=yes
+else
+  GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+else
+  CXXFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CXX"  am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
+
+
+
+
+
+func_stripname_cnf ()
+{
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
+
+      if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if ${ac_cv_prog_CXXCPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+else
+  _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  compiler_CXX=$CC
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+    else
+      lt_prog_compiler_no_builtin_flag_CXX=
+    fi
+
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          whole_archive_flag_spec_CXX=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+    ld_shlibs_CXX=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+      aix[4-9]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        archive_cmds_CXX=''
+        hardcode_direct_CXX=yes
+        hardcode_direct_absolute_CXX=yes
+        hardcode_libdir_separator_CXX=':'
+        link_all_deplibs_CXX=yes
+        file_list_spec_CXX='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[012]|aix4.[012].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    hardcode_direct_CXX=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    hardcode_minus_L_CXX=yes
+	    hardcode_libdir_flag_spec_CXX='-L$libdir'
+	    hardcode_libdir_separator_CXX=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
+
+        export_dynamic_flag_spec_CXX='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        always_export_symbols_CXX=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          allow_undefined_flag_CXX='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+          hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+	    allow_undefined_flag_CXX="-z nodefs"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    no_undefined_flag_CXX=' ${wl}-bernotok'
+	    allow_undefined_flag_CXX=' ${wl}-berok'
+	    if test "$with_gnu_ld" = yes; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      whole_archive_flag_spec_CXX='$convenience'
+	    fi
+	    archive_cmds_need_lc_CXX=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  allow_undefined_flag_CXX=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX=' '
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=yes
+	  file_list_spec_CXX='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=".dll"
+	  # FIXME: Setting linknames here is a bad hack.
+	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	  archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	    else
+	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	    fi~
+	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	    linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+	  enable_shared_with_static_runtimes_CXX=yes
+	  # Don't use ranlib
+	  old_postinstall_cmds_CXX='chmod 644 $oldlib'
+	  postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+	    lt_tool_outputfile="@TOOL_OUTPUT@"~
+	    case $lt_outputfile in
+	      *.exe|*.EXE) ;;
+	      *)
+		lt_outputfile="$lt_outputfile.exe"
+		lt_tool_outputfile="$lt_tool_outputfile.exe"
+		;;
+	    esac~
+	    func_to_tool_file "$lt_outputfile"~
+	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	      $RM "$lt_outputfile.manifest";
+	    fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=no
+	  enable_shared_with_static_runtimes_CXX=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file (1st line
+	    # is EXPORTS), use it as is; otherwise, prepend...
+	    archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      cp $export_symbols $output_objdir/$soname.def;
+	    else
+	      echo EXPORTS > $output_objdir/$soname.def;
+	      cat $export_symbols >> $output_objdir/$soname.def;
+	    fi~
+	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    ld_shlibs_CXX=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_CXX=no
+  hardcode_direct_CXX=no
+  hardcode_automatic_CXX=yes
+  hardcode_shlibpath_var_CXX=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec_CXX=''
+  fi
+  link_all_deplibs_CXX=yes
+  allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+       if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+
+  else
+  ld_shlibs_CXX=no
+  fi
+
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        ld_shlibs_CXX=no
+        ;;
+
+      freebsd-elf*)
+        archive_cmds_need_lc_CXX=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        ld_shlibs_CXX=yes
+        ;;
+
+      gnu*)
+        ;;
+
+      haiku*)
+        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        link_all_deplibs_CXX=yes
+        ;;
+
+      hpux9*)
+        hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator_CXX=:
+        export_dynamic_flag_spec_CXX='${wl}-E'
+        hardcode_direct_CXX=yes
+        hardcode_minus_L_CXX=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            ld_shlibs_CXX=no
+            ;;
+          aCC*)
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              ld_shlibs_CXX=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      export_dynamic_flag_spec_CXX='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct_CXX=no
+            hardcode_shlibpath_var_CXX=no
+            ;;
+          *)
+            hardcode_direct_CXX=yes
+            hardcode_direct_absolute_CXX=yes
+            hardcode_minus_L_CXX=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[3-9]*)
+	hardcode_direct_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	      fi
+	    fi
+	    link_all_deplibs_CXX=yes
+	    ;;
+        esac
+        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        hardcode_libdir_separator_CXX=:
+        inherit_rpath_CXX=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    archive_cmds_need_lc_CXX=no
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+	      prelink_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      old_archive_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+		$RANLIB $oldlib'
+	      archive_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      archive_expsym_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      no_undefined_flag_CXX=' -zdefs'
+	      archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      hardcode_libdir_flag_spec_CXX='-R$libdir'
+	      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      compiler_needs_object_CXX=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        ld_shlibs_CXX=yes
+	;;
+
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	ld_shlibs_CXX=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	  hardcode_direct_absolute_CXX=yes
+	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='${wl}-E'
+	    whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        allow_undefined_flag_CXX=' -expect_unresolved \*'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+		;;
+	    esac
+
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	      hardcode_libdir_separator_CXX=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            archive_cmds_need_lc_CXX=yes
+	    no_undefined_flag_CXX=' -zdefs'
+	    archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    hardcode_libdir_flag_spec_CXX='-R$libdir'
+	    hardcode_shlibpath_var_CXX=no
+	    case $host_os in
+	      solaris2.[0-5] | solaris2.[0-5].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    link_all_deplibs_CXX=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      fi
+
+	      hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[0-5] | solaris2.[0-5].*) ;;
+		*)
+		  whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_CXX='${wl}-z,text'
+      archive_cmds_need_lc_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	no_undefined_flag_CXX='${wl}-z,text'
+	allow_undefined_flag_CXX='${wl}-z,nodefs'
+	archive_cmds_need_lc_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+	hardcode_libdir_separator_CXX=':'
+	link_all_deplibs_CXX=yes
+	export_dynamic_flag_spec_CXX='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+	      '"$old_archive_cmds_CXX"
+	    reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+	      '"$reload_cmds_CXX"
+	    ;;
+	  *)
+	    archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+    esac
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+    test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+    GCC_CXX="$GXX"
+    LD_CXX="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case ${prev}${p} in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test "$pre_test_object_deps_done" = no; then
+	 case ${prev} in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX="${prev}${p}"
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX="${prev}${p}"
+	 else
+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX="$p"
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX="$p"
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC* | sunCC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_CXX='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_CXX=
+      ;;
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_CXX='-fPIC -shared'
+      ;;
+    *)
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[4-9]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-qpic'
+	    lt_prog_compiler_static_CXX='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      lt_prog_compiler_pic_CXX='-KPIC'
+	      lt_prog_compiler_static_CXX='-Bstatic'
+	      lt_prog_compiler_wl_CXX='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        lt_prog_compiler_pic_CXX='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
+	;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_CXX=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_CXX=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  case $host_os in
+  aix[4-9]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    # Also, AIX nm treats weak defined symbols like other global defined
+    # symbols, whereas GNU nm marks them as "W".
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX="$ltdll_cmds"
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl*)
+      exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+      ;;
+    esac
+    ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_CXX
+	  pic_flag=$lt_prog_compiler_pic_CXX
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+	  allow_undefined_flag_CXX=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_CXX=no
+	  else
+	    lt_cv_archive_cmds_need_lc_CXX=yes
+	  fi
+	  allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+      archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+   test -n "$runpath_var_CXX" ||
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_CXX" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+     test "$hardcode_minus_L_CXX" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+
+if test "$hardcode_action_CXX" = relink ||
+   test "$inherit_rpath_CXX" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$F77"; then
+  ac_cv_prog_F77="$F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+F77=$ac_cv_prog_F77
+if test -n "$F77"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $F77" >&5
+$as_echo "$F77" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$F77" && break
+  done
+fi
+if test -z "$F77"; then
+  ac_ct_F77=$F77
+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_F77"; then
+  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_F77="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_F77=$ac_cv_prog_ac_ct_F77
+if test -n "$ac_ct_F77"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_F77" >&5
+$as_echo "$ac_ct_F77" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_F77" && break
+done
+
+  if test "x$ac_ct_F77" = x; then
+    F77=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    F77=$ac_ct_F77
+  fi
+fi
+
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran 77 compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file.  (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran 77 compiler" >&5
+$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; }
+if ${ac_cv_f77_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+#ifndef __GNUC__
+       choke me
+#endif
+
+      end
+_ACEOF
+if ac_fn_f77_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_f77_compiler_gnu" >&5
+$as_echo "$ac_cv_f77_compiler_gnu" >&6; }
+ac_ext=$ac_save_ext
+ac_test_FFLAGS=${FFLAGS+set}
+ac_save_FFLAGS=$FFLAGS
+FFLAGS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $F77 accepts -g" >&5
+$as_echo_n "checking whether $F77 accepts -g... " >&6; }
+if ${ac_cv_prog_f77_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  FFLAGS=-g
+cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_f77_try_compile "$LINENO"; then :
+  ac_cv_prog_f77_g=yes
+else
+  ac_cv_prog_f77_g=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_f77_g" >&5
+$as_echo "$ac_cv_prog_f77_g" >&6; }
+if test "$ac_test_FFLAGS" = set; then
+  FFLAGS=$ac_save_FFLAGS
+elif test $ac_cv_prog_f77_g = yes; then
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-g -O2"
+  else
+    FFLAGS="-g"
+  fi
+else
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-O2"
+  else
+    FFLAGS=
+  fi
+fi
+
+if test $ac_compiler_gnu = yes; then
+  G77=yes
+else
+  G77=
+fi
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+
+      ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+
+archive_cmds_need_lc_F77=no
+allow_undefined_flag_F77=
+always_export_symbols_F77=no
+archive_expsym_cmds_F77=
+export_dynamic_flag_spec_F77=
+hardcode_direct_F77=no
+hardcode_direct_absolute_F77=no
+hardcode_libdir_flag_spec_F77=
+hardcode_libdir_separator_F77=
+hardcode_minus_L_F77=no
+hardcode_automatic_F77=no
+inherit_rpath_F77=no
+module_cmds_F77=
+module_expsym_cmds_F77=
+link_all_deplibs_F77=unknown
+old_archive_cmds_F77=$old_archive_cmds
+reload_flag_F77=$reload_flag
+reload_cmds_F77=$reload_cmds
+no_undefined_flag_F77=
+whole_archive_flag_spec_F77=
+enable_shared_with_static_runtimes_F77=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+objext_F77=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
+  compiler=$CC
+  compiler_F77=$CC
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+  GCC=$G77
+  if test -n "$compiler"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[4-9]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+    GCC_F77="$G77"
+    LD_F77="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    lt_prog_compiler_wl_F77=
+lt_prog_compiler_pic_F77=
+lt_prog_compiler_static_F77=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_F77='-Wl,'
+    lt_prog_compiler_static_F77='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_F77='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_F77='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_F77=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_F77=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_F77='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_F77=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic_F77='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl_F77='-Xlinker '
+      if test -n "$lt_prog_compiler_pic_F77"; then
+        lt_prog_compiler_pic_F77="-Xcompiler $lt_prog_compiler_pic_F77"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      else
+	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-KPIC'
+	lt_prog_compiler_static_F77='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fPIC'
+	lt_prog_compiler_static_F77='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='--shared'
+	lt_prog_compiler_static_F77='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl_F77='-Wl,-Wl,,'
+	lt_prog_compiler_pic_F77='-PIC'
+	lt_prog_compiler_static_F77='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fpic'
+	lt_prog_compiler_static_F77='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_F77='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_F77='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-qpic'
+	lt_prog_compiler_static_F77='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl_F77='-Wl,'
+	  lt_prog_compiler_pic_F77='-fPIC'
+	  lt_prog_compiler_static_F77='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl_F77='-Wl,'
+	  lt_prog_compiler_pic_F77='-fpic'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_F77='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl_F77='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_F77='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_F77='-Qoption ld '
+      lt_prog_compiler_pic_F77='-PIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_F77='-Kconform_pic'
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_F77='-pic'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_F77=
+    ;;
+  *)
+    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_F77=$lt_prog_compiler_pic_F77
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_F77" >&5
+$as_echo "$lt_cv_prog_compiler_pic_F77" >&6; }
+lt_prog_compiler_pic_F77=$lt_cv_prog_compiler_pic_F77
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_F77"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_F77=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_F77"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_F77=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_F77" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
+    case $lt_prog_compiler_pic_F77 in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
+     esac
+else
+    lt_prog_compiler_pic_F77=
+     lt_prog_compiler_can_build_shared_F77=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_F77=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_F77=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_F77=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_F77" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
+    :
+else
+    lt_prog_compiler_static_F77=
+fi
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_F77=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_F77=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_F77" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_F77=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_F77=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_F77" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag_F77=
+  always_export_symbols_F77=no
+  archive_cmds_F77=
+  archive_expsym_cmds_F77=
+  compiler_needs_object_F77=no
+  enable_shared_with_static_runtimes_F77=no
+  export_dynamic_flag_spec_F77=
+  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic_F77=no
+  hardcode_direct_F77=no
+  hardcode_direct_absolute_F77=no
+  hardcode_libdir_flag_spec_F77=
+  hardcode_libdir_separator_F77=
+  hardcode_minus_L_F77=no
+  hardcode_shlibpath_var_F77=unsupported
+  inherit_rpath_F77=no
+  link_all_deplibs_F77=unknown
+  module_cmds_F77=
+  module_expsym_cmds_F77=
+  old_archive_from_new_cmds_F77=
+  old_archive_from_expsyms_cmds_F77=
+  thread_safe_flag_spec_F77=
+  whole_archive_flag_spec_F77=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_F77=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_F77=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_F77=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_F77=''
+        ;;
+      m68k)
+            archive_cmds_F77='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_F77='-L$libdir'
+            hardcode_minus_L_F77=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_F77=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      export_dynamic_flag_spec_F77='${wl}--export-all-symbols'
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=no
+      enable_shared_with_static_runtimes_F77=yes
+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_F77='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs_F77=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_F77='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec_F77=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_F77=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_F77=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds_F77='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec_F77='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+	  archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds_F77='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs_F77=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs_F77=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_F77" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_F77=
+      export_dynamic_flag_spec_F77=
+      whole_archive_flag_spec_F77=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=yes
+      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_F77=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_F77=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_F77=''
+      hardcode_direct_F77=yes
+      hardcode_direct_absolute_F77=yes
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+      file_list_spec_F77='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct_F77=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L_F77=yes
+	  hardcode_libdir_flag_spec_F77='-L$libdir'
+	  hardcode_libdir_separator_F77=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec_F77='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_F77=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_F77='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__F77=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__F77"; then
+    lt_cv_aix_libpath__F77=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__F77"; then
+    lt_cv_aix_libpath__F77="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__F77
+fi
+
+        hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds_F77='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_F77="-z nodefs"
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__F77=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__F77"; then
+    lt_cv_aix_libpath__F77=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__F77"; then
+    lt_cv_aix_libpath__F77="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__F77
+fi
+
+	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_F77=' ${wl}-bernotok'
+	  allow_undefined_flag_F77=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec_F77='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec_F77='$convenience'
+	  fi
+	  archive_cmds_need_lc_F77=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_F77=''
+        ;;
+      m68k)
+            archive_cmds_F77='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_F77='-L$libdir'
+            hardcode_minus_L_F77=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_F77=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec_F77=' '
+	allow_undefined_flag_F77=unsupported
+	always_export_symbols_F77=yes
+	file_list_spec_F77='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_F77='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, F77)='true'
+	enable_shared_with_static_runtimes_F77=yes
+	exclude_expsyms_F77='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds_F77='chmod 644 $oldlib'
+	postlink_cmds_F77='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec_F77=' '
+	allow_undefined_flag_F77=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds_F77='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes_F77=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_F77=no
+  hardcode_direct_F77=no
+  hardcode_automatic_F77=yes
+  hardcode_shlibpath_var_F77=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec_F77='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    compiler_needs_object_F77=yes
+  else
+    whole_archive_flag_spec_F77=''
+  fi
+  link_all_deplibs_F77=yes
+  allow_undefined_flag_F77="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs_F77=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_F77='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_direct_F77=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds_F77='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+	hardcode_direct_F77=yes
+	hardcode_direct_absolute_F77=yes
+	export_dynamic_flag_spec_F77='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_F77=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct_F77=no
+	  hardcode_shlibpath_var_F77=no
+	  ;;
+	*)
+	  hardcode_direct_F77=yes
+	  hardcode_direct_absolute_F77=yes
+	  export_dynamic_flag_spec_F77='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_F77=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat > conftest.$ac_ext <<_ACEOF
+
+      subroutine foo
+      end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc_F77='no'
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      inherit_rpath_F77=yes
+      link_all_deplibs_F77=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    newsos6)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_F77=yes
+	hardcode_shlibpath_var_F77=no
+	hardcode_direct_absolute_F77=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_F77='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_F77='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      allow_undefined_flag_F77=unsupported
+      archive_cmds_F77='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc_F77='no'
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_F77='-rpath $libdir'
+      fi
+      archive_cmds_need_lc_F77='no'
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_F77=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_F77='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds_F77='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds_F77='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_F77='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_shlibpath_var_F77=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs_F77=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_F77='$CC -r -o $output$reload_objs'
+	  hardcode_direct_F77=no
+        ;;
+	motorola)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_F77=no
+      export_dynamic_flag_spec_F77='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_F77=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_F77=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_F77='${wl}-z,text'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_F77='${wl}-z,text'
+      allow_undefined_flag_F77='${wl}-z,nodefs'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='${wl}-R,$libdir'
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      ld_shlibs_F77=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec_F77='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_F77" >&5
+$as_echo "$ld_shlibs_F77" >&6; }
+test "$ld_shlibs_F77" = no && can_build_shared=no
+
+with_gnu_ld_F77=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_F77" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_F77=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_F77 in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_F77
+	  pic_flag=$lt_prog_compiler_pic_F77
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_F77
+	  allow_undefined_flag_F77=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_F77 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_F77 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_F77=no
+	  else
+	    lt_cv_archive_cmds_need_lc_F77=yes
+	  fi
+	  allow_undefined_flag_F77=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_F77" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_F77" >&6; }
+      archive_cmds_need_lc_F77=$lt_cv_archive_cmds_need_lc_F77
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_F77\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_F77\""
+    cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_F77=
+if test -n "$hardcode_libdir_flag_spec_F77" ||
+   test -n "$runpath_var_F77" ||
+   test "X$hardcode_automatic_F77" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_F77" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
+     test "$hardcode_minus_L_F77" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_F77=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_F77=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_F77=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_F77" >&5
+$as_echo "$hardcode_action_F77" >&6; }
+
+if test "$hardcode_action_F77" = relink ||
+   test "$inherit_rpath_F77" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+  CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$FC"; then
+  ac_cv_prog_FC="$FC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_FC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+FC=$ac_cv_prog_FC
+if test -n "$FC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FC" >&5
+$as_echo "$FC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$FC" && break
+  done
+fi
+if test -z "$FC"; then
+  ac_ct_FC=$FC
+  for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_FC"; then
+  ac_cv_prog_ac_ct_FC="$ac_ct_FC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_FC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_FC=$ac_cv_prog_ac_ct_FC
+if test -n "$ac_ct_FC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FC" >&5
+$as_echo "$ac_ct_FC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_FC" && break
+done
+
+  if test "x$ac_ct_FC" = x; then
+    FC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    FC=$ac_ct_FC
+  fi
+fi
+
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file.  (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran compiler" >&5
+$as_echo_n "checking whether we are using the GNU Fortran compiler... " >&6; }
+if ${ac_cv_fc_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+#ifndef __GNUC__
+       choke me
+#endif
+
+      end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_fc_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_compiler_gnu" >&5
+$as_echo "$ac_cv_fc_compiler_gnu" >&6; }
+ac_ext=$ac_save_ext
+ac_test_FCFLAGS=${FCFLAGS+set}
+ac_save_FCFLAGS=$FCFLAGS
+FCFLAGS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $FC accepts -g" >&5
+$as_echo_n "checking whether $FC accepts -g... " >&6; }
+if ${ac_cv_prog_fc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  FCFLAGS=-g
+cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+  ac_cv_prog_fc_g=yes
+else
+  ac_cv_prog_fc_g=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_g" >&5
+$as_echo "$ac_cv_prog_fc_g" >&6; }
+if test "$ac_test_FCFLAGS" = set; then
+  FCFLAGS=$ac_save_FCFLAGS
+elif test $ac_cv_prog_fc_g = yes; then
+  if test "x$ac_cv_fc_compiler_gnu" = xyes; then
+    FCFLAGS="-g -O2"
+  else
+    FCFLAGS="-g"
+  fi
+else
+  if test "x$ac_cv_fc_compiler_gnu" = xyes; then
+    FCFLAGS="-O2"
+  else
+    FCFLAGS=
+  fi
+fi
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+
+      ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+
+archive_cmds_need_lc_FC=no
+allow_undefined_flag_FC=
+always_export_symbols_FC=no
+archive_expsym_cmds_FC=
+export_dynamic_flag_spec_FC=
+hardcode_direct_FC=no
+hardcode_direct_absolute_FC=no
+hardcode_libdir_flag_spec_FC=
+hardcode_libdir_separator_FC=
+hardcode_minus_L_FC=no
+hardcode_automatic_FC=no
+inherit_rpath_FC=no
+module_cmds_FC=
+module_expsym_cmds_FC=
+link_all_deplibs_FC=unknown
+old_archive_cmds_FC=$old_archive_cmds
+reload_flag_FC=$reload_flag
+reload_cmds_FC=$reload_cmds
+no_undefined_flag_FC=
+whole_archive_flag_spec_FC=
+enable_shared_with_static_runtimes_FC=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+objext_FC=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  compiler_FC=$CC
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+  if test -n "$compiler"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[4-9]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+    GCC_FC="$ac_cv_fc_compiler_gnu"
+    LD_FC="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    # Dependencies to place before and after the object being linked:
+predep_objects_FC=
+postdep_objects_FC=
+predeps_FC=
+postdeps_FC=
+compiler_lib_search_path_FC=
+
+cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case ${prev}${p} in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test "$pre_test_object_deps_done" = no; then
+	 case ${prev} in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_FC"; then
+	     compiler_lib_search_path_FC="${prev}${p}"
+	   else
+	     compiler_lib_search_path_FC="${compiler_lib_search_path_FC} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_FC"; then
+	   postdeps_FC="${prev}${p}"
+	 else
+	   postdeps_FC="${postdeps_FC} ${prev}${p}"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_FC"; then
+	   predep_objects_FC="$p"
+	 else
+	   predep_objects_FC="$predep_objects_FC $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_FC"; then
+	   postdep_objects_FC="$p"
+	 else
+	   postdep_objects_FC="$postdep_objects_FC $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling FC test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+
+
+case " $postdeps_FC " in
+*" -lc "*) archive_cmds_need_lc_FC=no ;;
+esac
+ compiler_lib_search_dirs_FC=
+if test -n "${compiler_lib_search_path_FC}"; then
+ compiler_lib_search_dirs_FC=`echo " ${compiler_lib_search_path_FC}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+    lt_prog_compiler_wl_FC=
+lt_prog_compiler_pic_FC=
+lt_prog_compiler_static_FC=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_FC='-Wl,'
+    lt_prog_compiler_static_FC='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_FC='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_FC='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_FC='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_FC='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_FC='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_FC=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_FC='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_FC=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_FC='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_FC=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic_FC='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl_FC='-Xlinker '
+      if test -n "$lt_prog_compiler_pic_FC"; then
+        lt_prog_compiler_pic_FC="-Xcompiler $lt_prog_compiler_pic_FC"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_FC='-Bstatic'
+      else
+	lt_prog_compiler_static_FC='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_FC='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_FC='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_FC='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_FC='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='-KPIC'
+	lt_prog_compiler_static_FC='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='-fPIC'
+	lt_prog_compiler_static_FC='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='--shared'
+	lt_prog_compiler_static_FC='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl_FC='-Wl,-Wl,,'
+	lt_prog_compiler_pic_FC='-PIC'
+	lt_prog_compiler_static_FC='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='-fpic'
+	lt_prog_compiler_static_FC='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_FC='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_FC='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='-qpic'
+	lt_prog_compiler_static_FC='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_FC='-KPIC'
+	  lt_prog_compiler_static_FC='-Bstatic'
+	  lt_prog_compiler_wl_FC=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic_FC='-KPIC'
+	  lt_prog_compiler_static_FC='-Bstatic'
+	  lt_prog_compiler_wl_FC='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_FC='-KPIC'
+	  lt_prog_compiler_static_FC='-Bstatic'
+	  lt_prog_compiler_wl_FC='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl_FC='-Wl,'
+	  lt_prog_compiler_pic_FC='-fPIC'
+	  lt_prog_compiler_static_FC='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl_FC='-Wl,'
+	  lt_prog_compiler_pic_FC='-fpic'
+	  lt_prog_compiler_static_FC='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_FC='-KPIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_FC='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_FC='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static_FC='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_FC='-KPIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl_FC='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_FC='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_FC='-Qoption ld '
+      lt_prog_compiler_pic_FC='-PIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      lt_prog_compiler_pic_FC='-KPIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_FC='-Kconform_pic'
+	lt_prog_compiler_static_FC='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      lt_prog_compiler_pic_FC='-KPIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      lt_prog_compiler_can_build_shared_FC=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_FC='-pic'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_FC=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_FC=
+    ;;
+  *)
+    lt_prog_compiler_pic_FC="$lt_prog_compiler_pic_FC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_FC=$lt_prog_compiler_pic_FC
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_FC" >&5
+$as_echo "$lt_cv_prog_compiler_pic_FC" >&6; }
+lt_prog_compiler_pic_FC=$lt_cv_prog_compiler_pic_FC
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_FC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_FC works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_FC works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_FC=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_FC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_FC=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_FC" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_FC" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_FC" = xyes; then
+    case $lt_prog_compiler_pic_FC in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_FC=" $lt_prog_compiler_pic_FC" ;;
+     esac
+else
+    lt_prog_compiler_pic_FC=
+     lt_prog_compiler_can_build_shared_FC=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_FC eval lt_tmp_static_flag=\"$lt_prog_compiler_static_FC\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_FC=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_FC=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_FC=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_FC" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_FC" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_FC" = xyes; then
+    :
+else
+    lt_prog_compiler_static_FC=
+fi
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_FC=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_FC=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; }
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_FC=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_FC=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_FC" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag_FC=
+  always_export_symbols_FC=no
+  archive_cmds_FC=
+  archive_expsym_cmds_FC=
+  compiler_needs_object_FC=no
+  enable_shared_with_static_runtimes_FC=no
+  export_dynamic_flag_spec_FC=
+  export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic_FC=no
+  hardcode_direct_FC=no
+  hardcode_direct_absolute_FC=no
+  hardcode_libdir_flag_spec_FC=
+  hardcode_libdir_separator_FC=
+  hardcode_minus_L_FC=no
+  hardcode_shlibpath_var_FC=unsupported
+  inherit_rpath_FC=no
+  link_all_deplibs_FC=unknown
+  module_cmds_FC=
+  module_expsym_cmds_FC=
+  old_archive_from_new_cmds_FC=
+  old_archive_from_expsyms_cmds_FC=
+  thread_safe_flag_spec_FC=
+  whole_archive_flag_spec_FC=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_FC=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_FC='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_FC=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec_FC='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_FC="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_FC=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_FC=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_FC=''
+        ;;
+      m68k)
+            archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_FC='-L$libdir'
+            hardcode_minus_L_FC=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_FC=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_FC='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, FC) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      export_dynamic_flag_spec_FC='${wl}--export-all-symbols'
+      allow_undefined_flag_FC=unsupported
+      always_export_symbols_FC=no
+      enable_shared_with_static_runtimes_FC=yes
+      export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_FC='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs_FC=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_FC=no
+      hardcode_shlibpath_var_FC=no
+      hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_FC='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_FC='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec_FC=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_FC=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_FC='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_FC=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds_FC='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec_FC='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+	  archive_cmds_FC='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs_FC=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_FC='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_FC=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_FC=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+	    archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs_FC=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_FC='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_FC" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_FC=
+      export_dynamic_flag_spec_FC=
+      whole_archive_flag_spec_FC=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_FC=unsupported
+      always_export_symbols_FC=yes
+      archive_expsym_cmds_FC='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_FC=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_FC=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds_FC='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_FC='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_FC=''
+      hardcode_direct_FC=yes
+      hardcode_direct_absolute_FC=yes
+      hardcode_libdir_separator_FC=':'
+      link_all_deplibs_FC=yes
+      file_list_spec_FC='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct_FC=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L_FC=yes
+	  hardcode_libdir_flag_spec_FC='-L$libdir'
+	  hardcode_libdir_separator_FC=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec_FC='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_FC=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_FC='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__FC"; then
+    lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__FC"; then
+    lt_cv_aix_libpath__FC="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__FC
+fi
+
+        hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds_FC='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_FC='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_FC="-z nodefs"
+	  archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__FC"; then
+    lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__FC"; then
+    lt_cv_aix_libpath__FC="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__FC
+fi
+
+	 hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_FC=' ${wl}-bernotok'
+	  allow_undefined_flag_FC=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec_FC='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec_FC='$convenience'
+	  fi
+	  archive_cmds_need_lc_FC=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_FC=''
+        ;;
+      m68k)
+            archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_FC='-L$libdir'
+            hardcode_minus_L_FC=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_FC=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec_FC=' '
+	allow_undefined_flag_FC=unsupported
+	always_export_symbols_FC=yes
+	file_list_spec_FC='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_FC='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, FC)='true'
+	enable_shared_with_static_runtimes_FC=yes
+	exclude_expsyms_FC='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds_FC='chmod 644 $oldlib'
+	postlink_cmds_FC='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec_FC=' '
+	allow_undefined_flag_FC=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_FC='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds_FC='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds_FC='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes_FC=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_FC=no
+  hardcode_direct_FC=no
+  hardcode_automatic_FC=yes
+  hardcode_shlibpath_var_FC=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec_FC='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    compiler_needs_object_FC=yes
+  else
+    whole_archive_flag_spec_FC=''
+  fi
+  link_all_deplibs_FC=yes
+  allow_undefined_flag_FC="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_FC="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_FC="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_FC="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_FC="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs_FC=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_FC='-R$libdir'
+      hardcode_direct_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_FC=yes
+      hardcode_minus_L_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_FC='-R$libdir'
+      hardcode_direct_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_FC='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_FC='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_FC=:
+      hardcode_direct_FC=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_FC=yes
+      export_dynamic_flag_spec_FC='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_FC='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_FC=:
+	hardcode_direct_FC=yes
+	hardcode_direct_absolute_FC=yes
+	export_dynamic_flag_spec_FC='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_FC=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_FC='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_FC=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct_FC=no
+	  hardcode_shlibpath_var_FC=no
+	  ;;
+	*)
+	  hardcode_direct_FC=yes
+	  hardcode_direct_absolute_FC=yes
+	  export_dynamic_flag_spec_FC='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_FC=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat > conftest.$ac_ext <<_ACEOF
+
+      subroutine foo
+      end
+_ACEOF
+if ac_fn_fc_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc_FC='no'
+      hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_FC=:
+      inherit_rpath_FC=yes
+      link_all_deplibs_FC=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_FC='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_FC='-R$libdir'
+      hardcode_direct_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    newsos6)
+      archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_FC=yes
+      hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_FC=:
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_FC=yes
+	hardcode_shlibpath_var_FC=no
+	hardcode_direct_absolute_FC=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_FC='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_FC='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      hardcode_minus_L_FC=yes
+      allow_undefined_flag_FC=unsupported
+      archive_cmds_FC='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds_FC='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_FC=' -expect_unresolved \*'
+	archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc_FC='no'
+      hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_FC=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_FC='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_FC=' -expect_unresolved \*'
+	archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_FC='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_FC='-rpath $libdir'
+      fi
+      archive_cmds_need_lc_FC='no'
+      hardcode_libdir_separator_FC=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_FC=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_FC='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds_FC='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds_FC='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec_FC='-R$libdir'
+      hardcode_shlibpath_var_FC=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_FC='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_FC='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs_FC=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_FC='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_FC='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      hardcode_direct_FC=yes
+      hardcode_minus_L_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_FC=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_FC='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_FC='$CC -r -o $output$reload_objs'
+	  hardcode_direct_FC=no
+        ;;
+	motorola)
+	  archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_FC=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_FC=no
+      export_dynamic_flag_spec_FC='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_FC=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_FC=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_FC='${wl}-z,text'
+      archive_cmds_need_lc_FC=no
+      hardcode_shlibpath_var_FC=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_FC='${wl}-z,text'
+      allow_undefined_flag_FC='${wl}-z,nodefs'
+      archive_cmds_need_lc_FC=no
+      hardcode_shlibpath_var_FC=no
+      hardcode_libdir_flag_spec_FC='${wl}-R,$libdir'
+      hardcode_libdir_separator_FC=':'
+      link_all_deplibs_FC=yes
+      export_dynamic_flag_spec_FC='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    *)
+      ld_shlibs_FC=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec_FC='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_FC" >&5
+$as_echo "$ld_shlibs_FC" >&6; }
+test "$ld_shlibs_FC" = no && can_build_shared=no
+
+with_gnu_ld_FC=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_FC" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_FC=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_FC in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_FC
+	  pic_flag=$lt_prog_compiler_pic_FC
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_FC
+	  allow_undefined_flag_FC=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_FC=no
+	  else
+	    lt_cv_archive_cmds_need_lc_FC=yes
+	  fi
+	  allow_undefined_flag_FC=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_FC" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_FC" >&6; }
+      archive_cmds_need_lc_FC=$lt_cv_archive_cmds_need_lc_FC
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_FC\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_FC\""
+    cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_FC=
+if test -n "$hardcode_libdir_flag_spec_FC" ||
+   test -n "$runpath_var_FC" ||
+   test "X$hardcode_automatic_FC" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_FC" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, FC)" != no &&
+     test "$hardcode_minus_L_FC" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_FC=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_FC=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_FC=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_FC" >&5
+$as_echo "$hardcode_action_FC" >&6; }
+
+if test "$hardcode_action_FC" = relink ||
+   test "$inherit_rpath_FC" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gccgo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gccgo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GOC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$GOC"; then
+  ac_cv_prog_GOC="$GOC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_GOC="${ac_tool_prefix}gccgo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+GOC=$ac_cv_prog_GOC
+if test -n "$GOC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GOC" >&5
+$as_echo "$GOC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_GOC"; then
+  ac_ct_GOC=$GOC
+  # Extract the first word of "gccgo", so it can be a program name with args.
+set dummy gccgo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_GOC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_GOC"; then
+  ac_cv_prog_ac_ct_GOC="$ac_ct_GOC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_GOC="gccgo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_GOC=$ac_cv_prog_ac_ct_GOC
+if test -n "$ac_ct_GOC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_GOC" >&5
+$as_echo "$ac_ct_GOC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_GOC" = x; then
+    GOC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    GOC=$ac_ct_GOC
+  fi
+else
+  GOC="$ac_cv_prog_GOC"
+fi
+
+
+
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+objext_GO=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+compiler_GO=$CC
+LD_GO="$LD"
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+archive_cmds_need_lc_GO=no
+
+old_archive_cmds_GO=$old_archive_cmds
+reload_flag_GO=$reload_flag
+reload_cmds_GO=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag_GO=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag_GO=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag_GO=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag_GO="$lt_prog_compiler_no_builtin_flag_GO -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+  lt_prog_compiler_wl_GO=
+lt_prog_compiler_pic_GO=
+lt_prog_compiler_static_GO=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_GO='-Wl,'
+    lt_prog_compiler_static_GO='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GO='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_GO='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_GO='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_GO='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_GO='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_GO=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GO='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_GO=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_GO='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_GO=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic_GO='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl_GO='-Xlinker '
+      if test -n "$lt_prog_compiler_pic_GO"; then
+        lt_prog_compiler_pic_GO="-Xcompiler $lt_prog_compiler_pic_GO"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_GO='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GO='-Bstatic'
+      else
+	lt_prog_compiler_static_GO='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_GO='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_GO='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GO='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_GO='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_GO='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_GO='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl_GO='-Wl,'
+	lt_prog_compiler_pic_GO='-KPIC'
+	lt_prog_compiler_static_GO='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl_GO='-Wl,'
+	lt_prog_compiler_pic_GO='-fPIC'
+	lt_prog_compiler_static_GO='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl_GO='-Wl,'
+	lt_prog_compiler_pic_GO='--shared'
+	lt_prog_compiler_static_GO='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl_GO='-Wl,-Wl,,'
+	lt_prog_compiler_pic_GO='-PIC'
+	lt_prog_compiler_static_GO='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_GO='-Wl,'
+	lt_prog_compiler_pic_GO='-fpic'
+	lt_prog_compiler_static_GO='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_GO='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_GO='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl_GO='-Wl,'
+	lt_prog_compiler_pic_GO='-qpic'
+	lt_prog_compiler_static_GO='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_GO='-KPIC'
+	  lt_prog_compiler_static_GO='-Bstatic'
+	  lt_prog_compiler_wl_GO=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic_GO='-KPIC'
+	  lt_prog_compiler_static_GO='-Bstatic'
+	  lt_prog_compiler_wl_GO='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_GO='-KPIC'
+	  lt_prog_compiler_static_GO='-Bstatic'
+	  lt_prog_compiler_wl_GO='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl_GO='-Wl,'
+	  lt_prog_compiler_pic_GO='-fPIC'
+	  lt_prog_compiler_static_GO='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl_GO='-Wl,'
+	  lt_prog_compiler_pic_GO='-fpic'
+	  lt_prog_compiler_static_GO='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_GO='-KPIC'
+      lt_prog_compiler_static_GO='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_GO='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_GO='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_GO='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static_GO='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_GO='-KPIC'
+      lt_prog_compiler_static_GO='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl_GO='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_GO='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_GO='-Qoption ld '
+      lt_prog_compiler_pic_GO='-PIC'
+      lt_prog_compiler_static_GO='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_GO='-Wl,'
+      lt_prog_compiler_pic_GO='-KPIC'
+      lt_prog_compiler_static_GO='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_GO='-Kconform_pic'
+	lt_prog_compiler_static_GO='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_GO='-Wl,'
+      lt_prog_compiler_pic_GO='-KPIC'
+      lt_prog_compiler_static_GO='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_GO='-Wl,'
+      lt_prog_compiler_can_build_shared_GO=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_GO='-pic'
+      lt_prog_compiler_static_GO='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_GO=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_GO=
+    ;;
+  *)
+    lt_prog_compiler_pic_GO="$lt_prog_compiler_pic_GO"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_GO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_GO=$lt_prog_compiler_pic_GO
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_GO" >&5
+$as_echo "$lt_cv_prog_compiler_pic_GO" >&6; }
+lt_prog_compiler_pic_GO=$lt_cv_prog_compiler_pic_GO
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_GO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_GO works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GO works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_GO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_GO=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_GO"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_GO=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_GO" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_GO" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_GO" = xyes; then
+    case $lt_prog_compiler_pic_GO in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_GO=" $lt_prog_compiler_pic_GO" ;;
+     esac
+else
+    lt_prog_compiler_pic_GO=
+     lt_prog_compiler_can_build_shared_GO=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_GO eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GO\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_GO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_GO=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_GO=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_GO=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_GO" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_GO" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_GO" = xyes; then
+    :
+else
+    lt_prog_compiler_static_GO=
+fi
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_GO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_GO=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_GO=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_GO" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_GO" >&6; }
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_GO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_GO=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_GO=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_GO" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_GO" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_GO" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag_GO=
+  always_export_symbols_GO=no
+  archive_cmds_GO=
+  archive_expsym_cmds_GO=
+  compiler_needs_object_GO=no
+  enable_shared_with_static_runtimes_GO=no
+  export_dynamic_flag_spec_GO=
+  export_symbols_cmds_GO='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic_GO=no
+  hardcode_direct_GO=no
+  hardcode_direct_absolute_GO=no
+  hardcode_libdir_flag_spec_GO=
+  hardcode_libdir_separator_GO=
+  hardcode_minus_L_GO=no
+  hardcode_shlibpath_var_GO=unsupported
+  inherit_rpath_GO=no
+  link_all_deplibs_GO=unknown
+  module_cmds_GO=
+  module_expsym_cmds_GO=
+  old_archive_from_new_cmds_GO=
+  old_archive_from_expsyms_cmds_GO=
+  thread_safe_flag_spec_GO=
+  whole_archive_flag_spec_GO=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_GO=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_GO='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_GO=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_GO='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec_GO='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_GO="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_GO=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_GO=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_GO='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_GO=''
+        ;;
+      m68k)
+            archive_cmds_GO='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_GO='-L$libdir'
+            hardcode_minus_L_GO=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_GO=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_GO='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_GO=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, GO) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_GO='-L$libdir'
+      export_dynamic_flag_spec_GO='${wl}--export-all-symbols'
+      allow_undefined_flag_GO=unsupported
+      always_export_symbols_GO=no
+      enable_shared_with_static_runtimes_GO=yes
+      export_symbols_cmds_GO='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_GO='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds_GO='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_GO='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_GO=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds_GO='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs_GO=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_GO=no
+      hardcode_shlibpath_var_GO=no
+      hardcode_libdir_flag_spec_GO='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_GO='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_GO='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_GO='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_GO='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_GO='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec_GO=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec_GO='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_GO=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_GO='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_GO=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds_GO='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds_GO='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec_GO='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec_GO='${wl}-rpath ${wl}$libdir'
+	  archive_cmds_GO='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds_GO='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs_GO=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_GO='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_GO='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GO='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_GO=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GO='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GO='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GO=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_GO=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_GO='${wl}-rpath ${wl}$libdir'
+	    archive_cmds_GO='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_GO='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs_GO=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_GO='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_GO=yes
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GO='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GO='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GO=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_GO" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_GO=
+      export_dynamic_flag_spec_GO=
+      whole_archive_flag_spec_GO=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_GO=unsupported
+      always_export_symbols_GO=yes
+      archive_expsym_cmds_GO='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_GO=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_GO=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds_GO='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_GO='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_GO=''
+      hardcode_direct_GO=yes
+      hardcode_direct_absolute_GO=yes
+      hardcode_libdir_separator_GO=':'
+      link_all_deplibs_GO=yes
+      file_list_spec_GO='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct_GO=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L_GO=yes
+	  hardcode_libdir_flag_spec_GO='-L$libdir'
+	  hardcode_libdir_separator_GO=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec_GO='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_GO=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_GO='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__GO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__GO=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__GO"; then
+    lt_cv_aix_libpath__GO=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__GO"; then
+    lt_cv_aix_libpath__GO="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__GO
+fi
+
+        hardcode_libdir_flag_spec_GO='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds_GO='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_GO='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_GO="-z nodefs"
+	  archive_expsym_cmds_GO="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__GO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__GO=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__GO"; then
+    lt_cv_aix_libpath__GO=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__GO"; then
+    lt_cv_aix_libpath__GO="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__GO
+fi
+
+	 hardcode_libdir_flag_spec_GO='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_GO=' ${wl}-bernotok'
+	  allow_undefined_flag_GO=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec_GO='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec_GO='$convenience'
+	  fi
+	  archive_cmds_need_lc_GO=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_GO="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_GO='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_GO=''
+        ;;
+      m68k)
+            archive_cmds_GO='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_GO='-L$libdir'
+            hardcode_minus_L_GO=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_GO=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec_GO=' '
+	allow_undefined_flag_GO=unsupported
+	always_export_symbols_GO=yes
+	file_list_spec_GO='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_GO='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds_GO='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, GO)='true'
+	enable_shared_with_static_runtimes_GO=yes
+	exclude_expsyms_GO='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds_GO='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds_GO='chmod 644 $oldlib'
+	postlink_cmds_GO='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec_GO=' '
+	allow_undefined_flag_GO=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_GO='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds_GO='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds_GO='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes_GO=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_GO=no
+  hardcode_direct_GO=no
+  hardcode_automatic_GO=yes
+  hardcode_shlibpath_var_GO=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec_GO='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec_GO=''
+  fi
+  link_all_deplibs_GO=yes
+  allow_undefined_flag_GO="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_GO="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_GO="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_GO="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_GO="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs_GO=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds_GO='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GO='-L$libdir'
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_GO='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_GO='-R$libdir'
+      hardcode_direct_GO=yes
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds_GO='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GO=yes
+      hardcode_minus_L_GO=yes
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_GO='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_GO='-R$libdir'
+      hardcode_direct_GO=yes
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_GO='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_GO='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_GO='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_GO=:
+      hardcode_direct_GO=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_GO=yes
+      export_dynamic_flag_spec_GO='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds_GO='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GO='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GO='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GO=:
+	hardcode_direct_GO=yes
+	hardcode_direct_absolute_GO=yes
+	export_dynamic_flag_spec_GO='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_GO=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GO='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GO='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_GO='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GO='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GO='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	archive_cmds_GO='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GO='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GO=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct_GO=no
+	  hardcode_shlibpath_var_GO=no
+	  ;;
+	*)
+	  hardcode_direct_GO=yes
+	  hardcode_direct_absolute_GO=yes
+	  export_dynamic_flag_spec_GO='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_GO=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_GO='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds_GO='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds_GO='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_GO='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc_GO='no'
+      hardcode_libdir_flag_spec_GO='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GO=:
+      inherit_rpath_GO=yes
+      link_all_deplibs_GO=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_GO='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_GO='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_GO='-R$libdir'
+      hardcode_direct_GO=yes
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    newsos6)
+      archive_cmds_GO='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GO=yes
+      hardcode_libdir_flag_spec_GO='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GO=:
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_GO=yes
+	hardcode_shlibpath_var_GO=no
+	hardcode_direct_absolute_GO=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_GO='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_GO='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_GO='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_GO='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_GO='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_GO='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_GO='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_GO='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs_GO=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_GO='-L$libdir'
+      hardcode_minus_L_GO=yes
+      allow_undefined_flag_GO=unsupported
+      archive_cmds_GO='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds_GO='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GO=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GO='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_GO=' -expect_unresolved \*'
+	archive_cmds_GO='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc_GO='no'
+      hardcode_libdir_flag_spec_GO='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GO=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GO=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GO='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_GO='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_GO=' -expect_unresolved \*'
+	archive_cmds_GO='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_GO='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_GO='-rpath $libdir'
+      fi
+      archive_cmds_need_lc_GO='no'
+      hardcode_libdir_separator_GO=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_GO=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_GO='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GO='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds_GO='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds_GO='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds_GO='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_GO='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec_GO='-R$libdir'
+      hardcode_shlibpath_var_GO=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_GO='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_GO='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs_GO=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_GO='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GO='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_GO='-L$libdir'
+      hardcode_direct_GO=yes
+      hardcode_minus_L_GO=yes
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_GO='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GO=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_GO='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_GO='$CC -r -o $output$reload_objs'
+	  hardcode_direct_GO=no
+        ;;
+	motorola)
+	  archive_cmds_GO='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GO=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_GO='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_GO=no
+      export_dynamic_flag_spec_GO='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_GO='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_GO=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_GO=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_GO='${wl}-z,text'
+      archive_cmds_need_lc_GO=no
+      hardcode_shlibpath_var_GO=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GO='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GO='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GO='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GO='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_GO='${wl}-z,text'
+      allow_undefined_flag_GO='${wl}-z,nodefs'
+      archive_cmds_need_lc_GO=no
+      hardcode_shlibpath_var_GO=no
+      hardcode_libdir_flag_spec_GO='${wl}-R,$libdir'
+      hardcode_libdir_separator_GO=':'
+      link_all_deplibs_GO=yes
+      export_dynamic_flag_spec_GO='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GO='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GO='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GO='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GO='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_GO='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GO='-L$libdir'
+      hardcode_shlibpath_var_GO=no
+      ;;
+
+    *)
+      ld_shlibs_GO=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec_GO='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_GO" >&5
+$as_echo "$ld_shlibs_GO" >&6; }
+test "$ld_shlibs_GO" = no && can_build_shared=no
+
+with_gnu_ld_GO=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_GO" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_GO=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_GO in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_GO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_GO
+	  pic_flag=$lt_prog_compiler_pic_GO
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_GO
+	  allow_undefined_flag_GO=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_GO 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_GO 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_GO=no
+	  else
+	    lt_cv_archive_cmds_need_lc_GO=yes
+	  fi
+	  allow_undefined_flag_GO=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_GO" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_GO" >&6; }
+      archive_cmds_need_lc_GO=$lt_cv_archive_cmds_need_lc_GO
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_GO=
+if test -n "$hardcode_libdir_flag_spec_GO" ||
+   test -n "$runpath_var_GO" ||
+   test "X$hardcode_automatic_GO" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_GO" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, GO)" != no &&
+     test "$hardcode_minus_L_GO" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_GO=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_GO=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_GO=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_GO" >&5
+$as_echo "$hardcode_action_GO" >&6; }
+
+if test "$hardcode_action_GO" = relink ||
+   test "$inherit_rpath_GO" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcj", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcj; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$GCJ"; then
+  ac_cv_prog_GCJ="$GCJ" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_GCJ="${ac_tool_prefix}gcj"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+GCJ=$ac_cv_prog_GCJ
+if test -n "$GCJ"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GCJ" >&5
+$as_echo "$GCJ" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_GCJ"; then
+  ac_ct_GCJ=$GCJ
+  # Extract the first word of "gcj", so it can be a program name with args.
+set dummy gcj; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_GCJ"; then
+  ac_cv_prog_ac_ct_GCJ="$ac_ct_GCJ" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_GCJ="gcj"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_GCJ=$ac_cv_prog_ac_ct_GCJ
+if test -n "$ac_ct_GCJ"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_GCJ" >&5
+$as_echo "$ac_ct_GCJ" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_GCJ" = x; then
+    GCJ=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    GCJ=$ac_ct_GCJ
+  fi
+else
+  GCJ="$ac_cv_prog_GCJ"
+fi
+
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+
+
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+objext_GCJ=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+compiler_GCJ=$CC
+LD_GCJ="$LD"
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+archive_cmds_need_lc_GCJ=no
+
+old_archive_cmds_GCJ=$old_archive_cmds
+reload_flag_GCJ=$reload_flag
+reload_cmds_GCJ=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag_GCJ=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag_GCJ=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+  lt_prog_compiler_wl_GCJ=
+lt_prog_compiler_pic_GCJ=
+lt_prog_compiler_static_GCJ=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_GCJ='-Wl,'
+    lt_prog_compiler_static_GCJ='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_GCJ='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_GCJ='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_GCJ=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_GCJ=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_GCJ='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_GCJ=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic_GCJ='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl_GCJ='-Xlinker '
+      if test -n "$lt_prog_compiler_pic_GCJ"; then
+        lt_prog_compiler_pic_GCJ="-Xcompiler $lt_prog_compiler_pic_GCJ"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      else
+	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_GCJ='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-KPIC'
+	lt_prog_compiler_static_GCJ='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-fPIC'
+	lt_prog_compiler_static_GCJ='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='--shared'
+	lt_prog_compiler_static_GCJ='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl_GCJ='-Wl,-Wl,,'
+	lt_prog_compiler_pic_GCJ='-PIC'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-fpic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_GCJ='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_GCJ='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl_GCJ='-Wl,'
+	lt_prog_compiler_pic_GCJ='-qpic'
+	lt_prog_compiler_static_GCJ='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_GCJ='-KPIC'
+	  lt_prog_compiler_static_GCJ='-Bstatic'
+	  lt_prog_compiler_wl_GCJ=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic_GCJ='-KPIC'
+	  lt_prog_compiler_static_GCJ='-Bstatic'
+	  lt_prog_compiler_wl_GCJ='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_GCJ='-KPIC'
+	  lt_prog_compiler_static_GCJ='-Bstatic'
+	  lt_prog_compiler_wl_GCJ='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl_GCJ='-Wl,'
+	  lt_prog_compiler_pic_GCJ='-fPIC'
+	  lt_prog_compiler_static_GCJ='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl_GCJ='-Wl,'
+	  lt_prog_compiler_pic_GCJ='-fpic'
+	  lt_prog_compiler_static_GCJ='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_GCJ='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static_GCJ='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_GCJ='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_GCJ='-Qoption ld '
+      lt_prog_compiler_pic_GCJ='-PIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_GCJ='-Kconform_pic'
+	lt_prog_compiler_static_GCJ='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_pic_GCJ='-KPIC'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_GCJ='-Wl,'
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_GCJ='-pic'
+      lt_prog_compiler_static_GCJ='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_GCJ=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_GCJ=
+    ;;
+  *)
+    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_GCJ=$lt_prog_compiler_pic_GCJ
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_GCJ" >&5
+$as_echo "$lt_cv_prog_compiler_pic_GCJ" >&6; }
+lt_prog_compiler_pic_GCJ=$lt_cv_prog_compiler_pic_GCJ
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_GCJ"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_GCJ=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_GCJ=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
+    case $lt_prog_compiler_pic_GCJ in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
+     esac
+else
+    lt_prog_compiler_pic_GCJ=
+     lt_prog_compiler_can_build_shared_GCJ=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_GCJ=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_GCJ=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_GCJ=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
+    :
+else
+    lt_prog_compiler_static_GCJ=
+fi
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_GCJ=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_GCJ=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; }
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_GCJ=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_GCJ=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag_GCJ=
+  always_export_symbols_GCJ=no
+  archive_cmds_GCJ=
+  archive_expsym_cmds_GCJ=
+  compiler_needs_object_GCJ=no
+  enable_shared_with_static_runtimes_GCJ=no
+  export_dynamic_flag_spec_GCJ=
+  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic_GCJ=no
+  hardcode_direct_GCJ=no
+  hardcode_direct_absolute_GCJ=no
+  hardcode_libdir_flag_spec_GCJ=
+  hardcode_libdir_separator_GCJ=
+  hardcode_minus_L_GCJ=no
+  hardcode_shlibpath_var_GCJ=unsupported
+  inherit_rpath_GCJ=no
+  link_all_deplibs_GCJ=unknown
+  module_cmds_GCJ=
+  module_expsym_cmds_GCJ=
+  old_archive_from_new_cmds_GCJ=
+  old_archive_from_expsyms_cmds_GCJ=
+  thread_safe_flag_spec_GCJ=
+  whole_archive_flag_spec_GCJ=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_GCJ=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_GCJ=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_GCJ=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_GCJ=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_GCJ=''
+        ;;
+      m68k)
+            archive_cmds_GCJ='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_GCJ='-L$libdir'
+            hardcode_minus_L_GCJ=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_GCJ=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      export_dynamic_flag_spec_GCJ='${wl}--export-all-symbols'
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=no
+      enable_shared_with_static_runtimes_GCJ=yes
+      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_GCJ='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec_GCJ=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_GCJ=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_GCJ=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds_GCJ='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec_GCJ='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+	  archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds_GCJ='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_GCJ=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_GCJ=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs_GCJ=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_GCJ" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_GCJ=
+      export_dynamic_flag_spec_GCJ=
+      whole_archive_flag_spec_GCJ=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_GCJ=unsupported
+      always_export_symbols_GCJ=yes
+      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_GCJ=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_GCJ=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_GCJ=''
+      hardcode_direct_GCJ=yes
+      hardcode_direct_absolute_GCJ=yes
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+      file_list_spec_GCJ='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct_GCJ=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L_GCJ=yes
+	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
+	  hardcode_libdir_separator_GCJ=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec_GCJ='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_GCJ=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_GCJ='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__GCJ=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__GCJ"; then
+    lt_cv_aix_libpath__GCJ=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__GCJ"; then
+    lt_cv_aix_libpath__GCJ="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__GCJ
+fi
+
+        hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds_GCJ='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_GCJ="-z nodefs"
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__GCJ=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__GCJ"; then
+    lt_cv_aix_libpath__GCJ=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__GCJ"; then
+    lt_cv_aix_libpath__GCJ="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__GCJ
+fi
+
+	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_GCJ=' ${wl}-bernotok'
+	  allow_undefined_flag_GCJ=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec_GCJ='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec_GCJ='$convenience'
+	  fi
+	  archive_cmds_need_lc_GCJ=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_GCJ=''
+        ;;
+      m68k)
+            archive_cmds_GCJ='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_GCJ='-L$libdir'
+            hardcode_minus_L_GCJ=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_GCJ=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec_GCJ=' '
+	allow_undefined_flag_GCJ=unsupported
+	always_export_symbols_GCJ=yes
+	file_list_spec_GCJ='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_GCJ='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, GCJ)='true'
+	enable_shared_with_static_runtimes_GCJ=yes
+	exclude_expsyms_GCJ='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds_GCJ='chmod 644 $oldlib'
+	postlink_cmds_GCJ='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec_GCJ=' '
+	allow_undefined_flag_GCJ=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds_GCJ='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes_GCJ=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_GCJ=no
+  hardcode_direct_GCJ=no
+  hardcode_automatic_GCJ=yes
+  hardcode_shlibpath_var_GCJ=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec_GCJ='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec_GCJ=''
+  fi
+  link_all_deplibs_GCJ=yes
+  allow_undefined_flag_GCJ="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs_GCJ=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_GCJ='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_direct_GCJ=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds_GCJ='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+	hardcode_direct_GCJ=yes
+	hardcode_direct_absolute_GCJ=yes
+	export_dynamic_flag_spec_GCJ='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_GCJ=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_GCJ='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_GCJ=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct_GCJ=no
+	  hardcode_shlibpath_var_GCJ=no
+	  ;;
+	*)
+	  hardcode_direct_GCJ=yes
+	  hardcode_direct_absolute_GCJ=yes
+	  export_dynamic_flag_spec_GCJ='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_GCJ=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc_GCJ='no'
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      inherit_rpath_GCJ=yes
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    newsos6)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_GCJ=yes
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_GCJ=yes
+	hardcode_shlibpath_var_GCJ=no
+	hardcode_direct_absolute_GCJ=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_GCJ='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_GCJ='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs_GCJ=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_minus_L_GCJ=yes
+      allow_undefined_flag_GCJ=unsupported
+      archive_cmds_GCJ='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc_GCJ='no'
+      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_GCJ=' -expect_unresolved \*'
+	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
+      fi
+      archive_cmds_need_lc_GCJ='no'
+      hardcode_libdir_separator_GCJ=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_GCJ=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_GCJ='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds_GCJ='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds_GCJ='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_GCJ='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec_GCJ='-R$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs_GCJ=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_direct_GCJ=yes
+      hardcode_minus_L_GCJ=yes
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
+	  hardcode_direct_GCJ=no
+        ;;
+	motorola)
+	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_GCJ=no
+      export_dynamic_flag_spec_GCJ='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_GCJ=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_GCJ=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_GCJ='${wl}-z,text'
+      archive_cmds_need_lc_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_GCJ='${wl}-z,text'
+      allow_undefined_flag_GCJ='${wl}-z,nodefs'
+      archive_cmds_need_lc_GCJ=no
+      hardcode_shlibpath_var_GCJ=no
+      hardcode_libdir_flag_spec_GCJ='${wl}-R,$libdir'
+      hardcode_libdir_separator_GCJ=':'
+      link_all_deplibs_GCJ=yes
+      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_GCJ='-L$libdir'
+      hardcode_shlibpath_var_GCJ=no
+      ;;
+
+    *)
+      ld_shlibs_GCJ=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec_GCJ='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_GCJ" >&5
+$as_echo "$ld_shlibs_GCJ" >&6; }
+test "$ld_shlibs_GCJ" = no && can_build_shared=no
+
+with_gnu_ld_GCJ=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_GCJ" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_GCJ=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_GCJ in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_GCJ+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_GCJ
+	  pic_flag=$lt_prog_compiler_pic_GCJ
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
+	  allow_undefined_flag_GCJ=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_GCJ 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_GCJ 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_GCJ=no
+	  else
+	    lt_cv_archive_cmds_need_lc_GCJ=yes
+	  fi
+	  allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_GCJ" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_GCJ" >&6; }
+      archive_cmds_need_lc_GCJ=$lt_cv_archive_cmds_need_lc_GCJ
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_GCJ=
+if test -n "$hardcode_libdir_flag_spec_GCJ" ||
+   test -n "$runpath_var_GCJ" ||
+   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_GCJ" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
+     test "$hardcode_minus_L_GCJ" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_GCJ=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_GCJ=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_GCJ=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_GCJ" >&5
+$as_echo "$hardcode_action_GCJ" >&6; }
+
+if test "$hardcode_action_GCJ" = relink ||
+   test "$inherit_rpath_GCJ" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ac_tool_prefix}windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RC"; then
+  ac_cv_prog_RC="$RC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RC="${ac_tool_prefix}windres"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RC=$ac_cv_prog_RC
+if test -n "$RC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RC" >&5
+$as_echo "$RC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RC"; then
+  ac_ct_RC=$RC
+  # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RC"; then
+  ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RC="windres"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RC=$ac_cv_prog_ac_ct_RC
+if test -n "$ac_ct_RC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RC" >&5
+$as_echo "$ac_ct_RC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RC" = x; then
+    RC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RC=$ac_ct_RC
+  fi
+else
+  RC="$ac_cv_prog_RC"
+fi
+
+
+
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+objext_RC=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+compiler_RC=$CC
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+lt_cv_prog_compiler_c_o_RC=yes
+
+if test -n "$compiler"; then
+  :
+
+
+
+fi
+
+GCC=$lt_save_GCC
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+
+
+# Ensure the correct file name (and path) conversion function
+# is available to the test suite.
+
+## --------------------------- ##
+## Work out which tests to run ##
+## --------------------------- ##
+ if test -n "$compiler_CXX"; then
+  HAVE_CXX_TRUE=
+  HAVE_CXX_FALSE='#'
+else
+  HAVE_CXX_TRUE='#'
+  HAVE_CXX_FALSE=
+fi
+
+ if test -n "$compiler_F77"; then
+  HAVE_F77_TRUE=
+  HAVE_F77_FALSE='#'
+else
+  HAVE_F77_TRUE='#'
+  HAVE_F77_FALSE=
+fi
+
+ if test -n "$compiler_FC"; then
+  HAVE_FC_TRUE=
+  HAVE_FC_FALSE='#'
+else
+  HAVE_FC_TRUE='#'
+  HAVE_FC_FALSE=
+fi
+
+ if test -n "$compiler_GCJ"; then
+  HAVE_GCJ_TRUE=
+  HAVE_GCJ_FALSE='#'
+else
+  HAVE_GCJ_TRUE='#'
+  HAVE_GCJ_FALSE=
+fi
+
+ if test -n "$compiler_RC"; then
+  HAVE_RC_TRUE=
+  HAVE_RC_FALSE='#'
+else
+  HAVE_RC_TRUE='#'
+  HAVE_RC_FALSE=
+fi
+
+
+## Whether `make' supports order-only prerequisites.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports order-only prerequisites" >&5
+$as_echo_n "checking whether ${MAKE-make} supports order-only prerequisites... " >&6; }
+if ${lt_cv_make_order_only+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  mkdir conftest.dir
+   cd conftest.dir
+   touch b
+   touch a
+cat >confmk << 'END'
+a: b | c
+a b c:
+	touch $@
+END
+   touch c
+   if ${MAKE-make} -s -q -f confmk >/dev/null 2>&1; then
+     lt_cv_make_order_only=yes
+   else
+     lt_cv_make_order_only=no
+   fi
+   cd ..
+   rm -rf conftest.dir
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_make_order_only" >&5
+$as_echo "$lt_cv_make_order_only" >&6; }
+if test $lt_cv_make_order_only = yes; then
+  ORDER='|'
+else
+  ORDER=''
+fi
+
+
+## ------------- ##
+## Documentation ##
+## ------------- ##
+
+HELP2MAN=${HELP2MAN-"${am_missing_run}help2man"}
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${INSTALL_LTDL_TRUE}" && test -z "${INSTALL_LTDL_FALSE}"; then
+  as_fn_error $? "conditional \"INSTALL_LTDL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${CONVENIENCE_LTDL_TRUE}" && test -z "${CONVENIENCE_LTDL_FALSE}"; then
+  as_fn_error $? "conditional \"CONVENIENCE_LTDL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+LT_CONFIG_H=config.h
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_CXX_TRUE}" && test -z "${HAVE_CXX_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_CXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_F77_TRUE}" && test -z "${HAVE_F77_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_F77\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_FC_TRUE}" && test -z "${HAVE_FC_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_FC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_GCJ_TRUE}" && test -z "${HAVE_GCJ_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_GCJ\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_RC_TRUE}" && test -z "${HAVE_RC_FALSE}"; then
+  as_fn_error $? "conditional \"HAVE_RC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by GNU Libtool $as_me 2.4.2, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU Libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+GNU Libtool config.status 2.4.2
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+LD_F77='`$ECHO "$LD_F77" | $SED "$delay_single_quote_subst"`'
+LD_FC='`$ECHO "$LD_FC" | $SED "$delay_single_quote_subst"`'
+LD_GO='`$ECHO "$LD_GO" | $SED "$delay_single_quote_subst"`'
+LD_GCJ='`$ECHO "$LD_GCJ" | $SED "$delay_single_quote_subst"`'
+LD_RC='`$ECHO "$LD_RC" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_F77='`$ECHO "$reload_flag_F77" | $SED "$delay_single_quote_subst"`'
+reload_flag_FC='`$ECHO "$reload_flag_FC" | $SED "$delay_single_quote_subst"`'
+reload_flag_GO='`$ECHO "$reload_flag_GO" | $SED "$delay_single_quote_subst"`'
+reload_flag_GCJ='`$ECHO "$reload_flag_GCJ" | $SED "$delay_single_quote_subst"`'
+reload_flag_RC='`$ECHO "$reload_flag_RC" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_F77='`$ECHO "$reload_cmds_F77" | $SED "$delay_single_quote_subst"`'
+reload_cmds_FC='`$ECHO "$reload_cmds_FC" | $SED "$delay_single_quote_subst"`'
+reload_cmds_GO='`$ECHO "$reload_cmds_GO" | $SED "$delay_single_quote_subst"`'
+reload_cmds_GCJ='`$ECHO "$reload_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+reload_cmds_RC='`$ECHO "$reload_cmds_RC" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_F77='`$ECHO "$old_archive_cmds_F77" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_FC='`$ECHO "$old_archive_cmds_FC" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_GO='`$ECHO "$old_archive_cmds_GO" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_GCJ='`$ECHO "$old_archive_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_RC='`$ECHO "$old_archive_cmds_RC" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_F77='`$ECHO "$compiler_F77" | $SED "$delay_single_quote_subst"`'
+compiler_FC='`$ECHO "$compiler_FC" | $SED "$delay_single_quote_subst"`'
+compiler_GO='`$ECHO "$compiler_GO" | $SED "$delay_single_quote_subst"`'
+compiler_GCJ='`$ECHO "$compiler_GCJ" | $SED "$delay_single_quote_subst"`'
+compiler_RC='`$ECHO "$compiler_RC" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_F77='`$ECHO "$GCC_F77" | $SED "$delay_single_quote_subst"`'
+GCC_FC='`$ECHO "$GCC_FC" | $SED "$delay_single_quote_subst"`'
+GCC_GO='`$ECHO "$GCC_GO" | $SED "$delay_single_quote_subst"`'
+GCC_GCJ='`$ECHO "$GCC_GCJ" | $SED "$delay_single_quote_subst"`'
+GCC_RC='`$ECHO "$GCC_RC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_F77='`$ECHO "$lt_prog_compiler_no_builtin_flag_F77" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_FC='`$ECHO "$lt_prog_compiler_no_builtin_flag_FC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_GO='`$ECHO "$lt_prog_compiler_no_builtin_flag_GO" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_GCJ='`$ECHO "$lt_prog_compiler_no_builtin_flag_GCJ" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_RC='`$ECHO "$lt_prog_compiler_no_builtin_flag_RC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_F77='`$ECHO "$lt_prog_compiler_pic_F77" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_FC='`$ECHO "$lt_prog_compiler_pic_FC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_GO='`$ECHO "$lt_prog_compiler_pic_GO" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_GCJ='`$ECHO "$lt_prog_compiler_pic_GCJ" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_RC='`$ECHO "$lt_prog_compiler_pic_RC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_F77='`$ECHO "$lt_prog_compiler_wl_F77" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_FC='`$ECHO "$lt_prog_compiler_wl_FC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_GO='`$ECHO "$lt_prog_compiler_wl_GO" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_GCJ='`$ECHO "$lt_prog_compiler_wl_GCJ" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_RC='`$ECHO "$lt_prog_compiler_wl_RC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_F77='`$ECHO "$lt_prog_compiler_static_F77" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_FC='`$ECHO "$lt_prog_compiler_static_FC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_GO='`$ECHO "$lt_prog_compiler_static_GO" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_GCJ='`$ECHO "$lt_prog_compiler_static_GCJ" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_RC='`$ECHO "$lt_prog_compiler_static_RC" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_F77='`$ECHO "$lt_cv_prog_compiler_c_o_F77" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_FC='`$ECHO "$lt_cv_prog_compiler_c_o_FC" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_GO='`$ECHO "$lt_cv_prog_compiler_c_o_GO" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_GCJ='`$ECHO "$lt_cv_prog_compiler_c_o_GCJ" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_RC='`$ECHO "$lt_cv_prog_compiler_c_o_RC" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_F77='`$ECHO "$archive_cmds_need_lc_F77" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_FC='`$ECHO "$archive_cmds_need_lc_FC" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_GO='`$ECHO "$archive_cmds_need_lc_GO" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_GCJ='`$ECHO "$archive_cmds_need_lc_GCJ" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_RC='`$ECHO "$archive_cmds_need_lc_RC" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_F77='`$ECHO "$enable_shared_with_static_runtimes_F77" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_FC='`$ECHO "$enable_shared_with_static_runtimes_FC" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_GO='`$ECHO "$enable_shared_with_static_runtimes_GO" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_GCJ='`$ECHO "$enable_shared_with_static_runtimes_GCJ" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_RC='`$ECHO "$enable_shared_with_static_runtimes_RC" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_F77='`$ECHO "$export_dynamic_flag_spec_F77" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_FC='`$ECHO "$export_dynamic_flag_spec_FC" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_GO='`$ECHO "$export_dynamic_flag_spec_GO" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_GCJ='`$ECHO "$export_dynamic_flag_spec_GCJ" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_RC='`$ECHO "$export_dynamic_flag_spec_RC" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_F77='`$ECHO "$whole_archive_flag_spec_F77" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_FC='`$ECHO "$whole_archive_flag_spec_FC" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_GO='`$ECHO "$whole_archive_flag_spec_GO" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_GCJ='`$ECHO "$whole_archive_flag_spec_GCJ" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_RC='`$ECHO "$whole_archive_flag_spec_RC" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_F77='`$ECHO "$compiler_needs_object_F77" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_FC='`$ECHO "$compiler_needs_object_FC" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_GO='`$ECHO "$compiler_needs_object_GO" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_GCJ='`$ECHO "$compiler_needs_object_GCJ" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_RC='`$ECHO "$compiler_needs_object_RC" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_F77='`$ECHO "$old_archive_from_new_cmds_F77" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_FC='`$ECHO "$old_archive_from_new_cmds_FC" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_GO='`$ECHO "$old_archive_from_new_cmds_GO" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_GCJ='`$ECHO "$old_archive_from_new_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_RC='`$ECHO "$old_archive_from_new_cmds_RC" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_F77='`$ECHO "$old_archive_from_expsyms_cmds_F77" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_FC='`$ECHO "$old_archive_from_expsyms_cmds_FC" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_GO='`$ECHO "$old_archive_from_expsyms_cmds_GO" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_GCJ='`$ECHO "$old_archive_from_expsyms_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_RC='`$ECHO "$old_archive_from_expsyms_cmds_RC" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_F77='`$ECHO "$archive_cmds_F77" | $SED "$delay_single_quote_subst"`'
+archive_cmds_FC='`$ECHO "$archive_cmds_FC" | $SED "$delay_single_quote_subst"`'
+archive_cmds_GO='`$ECHO "$archive_cmds_GO" | $SED "$delay_single_quote_subst"`'
+archive_cmds_GCJ='`$ECHO "$archive_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+archive_cmds_RC='`$ECHO "$archive_cmds_RC" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_F77='`$ECHO "$archive_expsym_cmds_F77" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_FC='`$ECHO "$archive_expsym_cmds_FC" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_GO='`$ECHO "$archive_expsym_cmds_GO" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_GCJ='`$ECHO "$archive_expsym_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_RC='`$ECHO "$archive_expsym_cmds_RC" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_F77='`$ECHO "$module_cmds_F77" | $SED "$delay_single_quote_subst"`'
+module_cmds_FC='`$ECHO "$module_cmds_FC" | $SED "$delay_single_quote_subst"`'
+module_cmds_GO='`$ECHO "$module_cmds_GO" | $SED "$delay_single_quote_subst"`'
+module_cmds_GCJ='`$ECHO "$module_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+module_cmds_RC='`$ECHO "$module_cmds_RC" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_F77='`$ECHO "$module_expsym_cmds_F77" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_FC='`$ECHO "$module_expsym_cmds_FC" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_GO='`$ECHO "$module_expsym_cmds_GO" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_GCJ='`$ECHO "$module_expsym_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_RC='`$ECHO "$module_expsym_cmds_RC" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_F77='`$ECHO "$with_gnu_ld_F77" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_FC='`$ECHO "$with_gnu_ld_FC" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_GO='`$ECHO "$with_gnu_ld_GO" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_GCJ='`$ECHO "$with_gnu_ld_GCJ" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_RC='`$ECHO "$with_gnu_ld_RC" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_F77='`$ECHO "$allow_undefined_flag_F77" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_FC='`$ECHO "$allow_undefined_flag_FC" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_GO='`$ECHO "$allow_undefined_flag_GO" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_GCJ='`$ECHO "$allow_undefined_flag_GCJ" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_RC='`$ECHO "$allow_undefined_flag_RC" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_F77='`$ECHO "$no_undefined_flag_F77" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_FC='`$ECHO "$no_undefined_flag_FC" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_GO='`$ECHO "$no_undefined_flag_GO" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_GCJ='`$ECHO "$no_undefined_flag_GCJ" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_RC='`$ECHO "$no_undefined_flag_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_F77='`$ECHO "$hardcode_libdir_flag_spec_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_FC='`$ECHO "$hardcode_libdir_flag_spec_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_GO='`$ECHO "$hardcode_libdir_flag_spec_GO" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_GCJ='`$ECHO "$hardcode_libdir_flag_spec_GCJ" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_RC='`$ECHO "$hardcode_libdir_flag_spec_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_F77='`$ECHO "$hardcode_libdir_separator_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_FC='`$ECHO "$hardcode_libdir_separator_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_GO='`$ECHO "$hardcode_libdir_separator_GO" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_GCJ='`$ECHO "$hardcode_libdir_separator_GCJ" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_RC='`$ECHO "$hardcode_libdir_separator_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_F77='`$ECHO "$hardcode_direct_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_FC='`$ECHO "$hardcode_direct_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_GO='`$ECHO "$hardcode_direct_GO" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_GCJ='`$ECHO "$hardcode_direct_GCJ" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_RC='`$ECHO "$hardcode_direct_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_F77='`$ECHO "$hardcode_direct_absolute_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_FC='`$ECHO "$hardcode_direct_absolute_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_GO='`$ECHO "$hardcode_direct_absolute_GO" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_GCJ='`$ECHO "$hardcode_direct_absolute_GCJ" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_RC='`$ECHO "$hardcode_direct_absolute_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_F77='`$ECHO "$hardcode_minus_L_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_FC='`$ECHO "$hardcode_minus_L_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_GO='`$ECHO "$hardcode_minus_L_GO" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_GCJ='`$ECHO "$hardcode_minus_L_GCJ" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_RC='`$ECHO "$hardcode_minus_L_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_F77='`$ECHO "$hardcode_shlibpath_var_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_FC='`$ECHO "$hardcode_shlibpath_var_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_GO='`$ECHO "$hardcode_shlibpath_var_GO" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_GCJ='`$ECHO "$hardcode_shlibpath_var_GCJ" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_RC='`$ECHO "$hardcode_shlibpath_var_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_F77='`$ECHO "$hardcode_automatic_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_FC='`$ECHO "$hardcode_automatic_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_GO='`$ECHO "$hardcode_automatic_GO" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_GCJ='`$ECHO "$hardcode_automatic_GCJ" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_RC='`$ECHO "$hardcode_automatic_RC" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_F77='`$ECHO "$inherit_rpath_F77" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_FC='`$ECHO "$inherit_rpath_FC" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_GO='`$ECHO "$inherit_rpath_GO" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_GCJ='`$ECHO "$inherit_rpath_GCJ" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_RC='`$ECHO "$inherit_rpath_RC" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_F77='`$ECHO "$link_all_deplibs_F77" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_FC='`$ECHO "$link_all_deplibs_FC" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_GO='`$ECHO "$link_all_deplibs_GO" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_GCJ='`$ECHO "$link_all_deplibs_GCJ" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_RC='`$ECHO "$link_all_deplibs_RC" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_F77='`$ECHO "$always_export_symbols_F77" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_FC='`$ECHO "$always_export_symbols_FC" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_GO='`$ECHO "$always_export_symbols_GO" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_GCJ='`$ECHO "$always_export_symbols_GCJ" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_RC='`$ECHO "$always_export_symbols_RC" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_F77='`$ECHO "$export_symbols_cmds_F77" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_FC='`$ECHO "$export_symbols_cmds_FC" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_GO='`$ECHO "$export_symbols_cmds_GO" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_GCJ='`$ECHO "$export_symbols_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_RC='`$ECHO "$export_symbols_cmds_RC" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_F77='`$ECHO "$exclude_expsyms_F77" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_FC='`$ECHO "$exclude_expsyms_FC" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_GO='`$ECHO "$exclude_expsyms_GO" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_GCJ='`$ECHO "$exclude_expsyms_GCJ" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_RC='`$ECHO "$exclude_expsyms_RC" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_F77='`$ECHO "$include_expsyms_F77" | $SED "$delay_single_quote_subst"`'
+include_expsyms_FC='`$ECHO "$include_expsyms_FC" | $SED "$delay_single_quote_subst"`'
+include_expsyms_GO='`$ECHO "$include_expsyms_GO" | $SED "$delay_single_quote_subst"`'
+include_expsyms_GCJ='`$ECHO "$include_expsyms_GCJ" | $SED "$delay_single_quote_subst"`'
+include_expsyms_RC='`$ECHO "$include_expsyms_RC" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_F77='`$ECHO "$prelink_cmds_F77" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_FC='`$ECHO "$prelink_cmds_FC" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_GO='`$ECHO "$prelink_cmds_GO" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_GCJ='`$ECHO "$prelink_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_RC='`$ECHO "$prelink_cmds_RC" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_F77='`$ECHO "$postlink_cmds_F77" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_FC='`$ECHO "$postlink_cmds_FC" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_GO='`$ECHO "$postlink_cmds_GO" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_GCJ='`$ECHO "$postlink_cmds_GCJ" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_RC='`$ECHO "$postlink_cmds_RC" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_F77='`$ECHO "$file_list_spec_F77" | $SED "$delay_single_quote_subst"`'
+file_list_spec_FC='`$ECHO "$file_list_spec_FC" | $SED "$delay_single_quote_subst"`'
+file_list_spec_GO='`$ECHO "$file_list_spec_GO" | $SED "$delay_single_quote_subst"`'
+file_list_spec_GCJ='`$ECHO "$file_list_spec_GCJ" | $SED "$delay_single_quote_subst"`'
+file_list_spec_RC='`$ECHO "$file_list_spec_RC" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_F77='`$ECHO "$hardcode_action_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_action_FC='`$ECHO "$hardcode_action_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_action_GO='`$ECHO "$hardcode_action_GO" | $SED "$delay_single_quote_subst"`'
+hardcode_action_GCJ='`$ECHO "$hardcode_action_GCJ" | $SED "$delay_single_quote_subst"`'
+hardcode_action_RC='`$ECHO "$hardcode_action_RC" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_F77='`$ECHO "$compiler_lib_search_dirs_F77" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_FC='`$ECHO "$compiler_lib_search_dirs_FC" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_GO='`$ECHO "$compiler_lib_search_dirs_GO" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_GCJ='`$ECHO "$compiler_lib_search_dirs_GCJ" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_RC='`$ECHO "$compiler_lib_search_dirs_RC" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_F77='`$ECHO "$predep_objects_F77" | $SED "$delay_single_quote_subst"`'
+predep_objects_FC='`$ECHO "$predep_objects_FC" | $SED "$delay_single_quote_subst"`'
+predep_objects_GO='`$ECHO "$predep_objects_GO" | $SED "$delay_single_quote_subst"`'
+predep_objects_GCJ='`$ECHO "$predep_objects_GCJ" | $SED "$delay_single_quote_subst"`'
+predep_objects_RC='`$ECHO "$predep_objects_RC" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_F77='`$ECHO "$postdep_objects_F77" | $SED "$delay_single_quote_subst"`'
+postdep_objects_FC='`$ECHO "$postdep_objects_FC" | $SED "$delay_single_quote_subst"`'
+postdep_objects_GO='`$ECHO "$postdep_objects_GO" | $SED "$delay_single_quote_subst"`'
+postdep_objects_GCJ='`$ECHO "$postdep_objects_GCJ" | $SED "$delay_single_quote_subst"`'
+postdep_objects_RC='`$ECHO "$postdep_objects_RC" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_F77='`$ECHO "$predeps_F77" | $SED "$delay_single_quote_subst"`'
+predeps_FC='`$ECHO "$predeps_FC" | $SED "$delay_single_quote_subst"`'
+predeps_GO='`$ECHO "$predeps_GO" | $SED "$delay_single_quote_subst"`'
+predeps_GCJ='`$ECHO "$predeps_GCJ" | $SED "$delay_single_quote_subst"`'
+predeps_RC='`$ECHO "$predeps_RC" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_F77='`$ECHO "$postdeps_F77" | $SED "$delay_single_quote_subst"`'
+postdeps_FC='`$ECHO "$postdeps_FC" | $SED "$delay_single_quote_subst"`'
+postdeps_GO='`$ECHO "$postdeps_GO" | $SED "$delay_single_quote_subst"`'
+postdeps_GCJ='`$ECHO "$postdeps_GCJ" | $SED "$delay_single_quote_subst"`'
+postdeps_RC='`$ECHO "$postdeps_RC" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_F77='`$ECHO "$compiler_lib_search_path_F77" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_FC='`$ECHO "$compiler_lib_search_path_FC" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_GO='`$ECHO "$compiler_lib_search_path_GO" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_GCJ='`$ECHO "$compiler_lib_search_path_GCJ" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_RC='`$ECHO "$compiler_lib_search_path_RC" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in AS \
+DLLTOOL \
+OBJDUMP \
+SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+LD_F77 \
+LD_FC \
+LD_GO \
+LD_GCJ \
+LD_RC \
+reload_flag_CXX \
+reload_flag_F77 \
+reload_flag_FC \
+reload_flag_GO \
+reload_flag_GCJ \
+reload_flag_RC \
+compiler_CXX \
+compiler_F77 \
+compiler_FC \
+compiler_GO \
+compiler_GCJ \
+compiler_RC \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_no_builtin_flag_F77 \
+lt_prog_compiler_no_builtin_flag_FC \
+lt_prog_compiler_no_builtin_flag_GO \
+lt_prog_compiler_no_builtin_flag_GCJ \
+lt_prog_compiler_no_builtin_flag_RC \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_pic_F77 \
+lt_prog_compiler_pic_FC \
+lt_prog_compiler_pic_GO \
+lt_prog_compiler_pic_GCJ \
+lt_prog_compiler_pic_RC \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_wl_F77 \
+lt_prog_compiler_wl_FC \
+lt_prog_compiler_wl_GO \
+lt_prog_compiler_wl_GCJ \
+lt_prog_compiler_wl_RC \
+lt_prog_compiler_static_CXX \
+lt_prog_compiler_static_F77 \
+lt_prog_compiler_static_FC \
+lt_prog_compiler_static_GO \
+lt_prog_compiler_static_GCJ \
+lt_prog_compiler_static_RC \
+lt_cv_prog_compiler_c_o_CXX \
+lt_cv_prog_compiler_c_o_F77 \
+lt_cv_prog_compiler_c_o_FC \
+lt_cv_prog_compiler_c_o_GO \
+lt_cv_prog_compiler_c_o_GCJ \
+lt_cv_prog_compiler_c_o_RC \
+export_dynamic_flag_spec_CXX \
+export_dynamic_flag_spec_F77 \
+export_dynamic_flag_spec_FC \
+export_dynamic_flag_spec_GO \
+export_dynamic_flag_spec_GCJ \
+export_dynamic_flag_spec_RC \
+whole_archive_flag_spec_CXX \
+whole_archive_flag_spec_F77 \
+whole_archive_flag_spec_FC \
+whole_archive_flag_spec_GO \
+whole_archive_flag_spec_GCJ \
+whole_archive_flag_spec_RC \
+compiler_needs_object_CXX \
+compiler_needs_object_F77 \
+compiler_needs_object_FC \
+compiler_needs_object_GO \
+compiler_needs_object_GCJ \
+compiler_needs_object_RC \
+with_gnu_ld_CXX \
+with_gnu_ld_F77 \
+with_gnu_ld_FC \
+with_gnu_ld_GO \
+with_gnu_ld_GCJ \
+with_gnu_ld_RC \
+allow_undefined_flag_CXX \
+allow_undefined_flag_F77 \
+allow_undefined_flag_FC \
+allow_undefined_flag_GO \
+allow_undefined_flag_GCJ \
+allow_undefined_flag_RC \
+no_undefined_flag_CXX \
+no_undefined_flag_F77 \
+no_undefined_flag_FC \
+no_undefined_flag_GO \
+no_undefined_flag_GCJ \
+no_undefined_flag_RC \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_flag_spec_F77 \
+hardcode_libdir_flag_spec_FC \
+hardcode_libdir_flag_spec_GO \
+hardcode_libdir_flag_spec_GCJ \
+hardcode_libdir_flag_spec_RC \
+hardcode_libdir_separator_CXX \
+hardcode_libdir_separator_F77 \
+hardcode_libdir_separator_FC \
+hardcode_libdir_separator_GO \
+hardcode_libdir_separator_GCJ \
+hardcode_libdir_separator_RC \
+exclude_expsyms_CXX \
+exclude_expsyms_F77 \
+exclude_expsyms_FC \
+exclude_expsyms_GO \
+exclude_expsyms_GCJ \
+exclude_expsyms_RC \
+include_expsyms_CXX \
+include_expsyms_F77 \
+include_expsyms_FC \
+include_expsyms_GO \
+include_expsyms_GCJ \
+include_expsyms_RC \
+file_list_spec_CXX \
+file_list_spec_F77 \
+file_list_spec_FC \
+file_list_spec_GO \
+file_list_spec_GCJ \
+file_list_spec_RC \
+compiler_lib_search_dirs_CXX \
+compiler_lib_search_dirs_F77 \
+compiler_lib_search_dirs_FC \
+compiler_lib_search_dirs_GO \
+compiler_lib_search_dirs_GCJ \
+compiler_lib_search_dirs_RC \
+predep_objects_CXX \
+predep_objects_F77 \
+predep_objects_FC \
+predep_objects_GO \
+predep_objects_GCJ \
+predep_objects_RC \
+postdep_objects_CXX \
+postdep_objects_F77 \
+postdep_objects_FC \
+postdep_objects_GO \
+postdep_objects_GCJ \
+postdep_objects_RC \
+predeps_CXX \
+predeps_F77 \
+predeps_FC \
+predeps_GO \
+predeps_GCJ \
+predeps_RC \
+postdeps_CXX \
+postdeps_F77 \
+postdeps_FC \
+postdeps_GO \
+postdeps_GCJ \
+postdeps_RC \
+compiler_lib_search_path_CXX \
+compiler_lib_search_path_F77 \
+compiler_lib_search_path_FC \
+compiler_lib_search_path_GO \
+compiler_lib_search_path_GCJ \
+compiler_lib_search_path_RC; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+reload_cmds_CXX \
+reload_cmds_F77 \
+reload_cmds_FC \
+reload_cmds_GO \
+reload_cmds_GCJ \
+reload_cmds_RC \
+old_archive_cmds_CXX \
+old_archive_cmds_F77 \
+old_archive_cmds_FC \
+old_archive_cmds_GO \
+old_archive_cmds_GCJ \
+old_archive_cmds_RC \
+old_archive_from_new_cmds_CXX \
+old_archive_from_new_cmds_F77 \
+old_archive_from_new_cmds_FC \
+old_archive_from_new_cmds_GO \
+old_archive_from_new_cmds_GCJ \
+old_archive_from_new_cmds_RC \
+old_archive_from_expsyms_cmds_CXX \
+old_archive_from_expsyms_cmds_F77 \
+old_archive_from_expsyms_cmds_FC \
+old_archive_from_expsyms_cmds_GO \
+old_archive_from_expsyms_cmds_GCJ \
+old_archive_from_expsyms_cmds_RC \
+archive_cmds_CXX \
+archive_cmds_F77 \
+archive_cmds_FC \
+archive_cmds_GO \
+archive_cmds_GCJ \
+archive_cmds_RC \
+archive_expsym_cmds_CXX \
+archive_expsym_cmds_F77 \
+archive_expsym_cmds_FC \
+archive_expsym_cmds_GO \
+archive_expsym_cmds_GCJ \
+archive_expsym_cmds_RC \
+module_cmds_CXX \
+module_cmds_F77 \
+module_cmds_FC \
+module_cmds_GO \
+module_cmds_GCJ \
+module_cmds_RC \
+module_expsym_cmds_CXX \
+module_expsym_cmds_F77 \
+module_expsym_cmds_FC \
+module_expsym_cmds_GO \
+module_expsym_cmds_GCJ \
+module_expsym_cmds_RC \
+export_symbols_cmds_CXX \
+export_symbols_cmds_F77 \
+export_symbols_cmds_FC \
+export_symbols_cmds_GO \
+export_symbols_cmds_GCJ \
+export_symbols_cmds_RC \
+prelink_cmds_CXX \
+prelink_cmds_F77 \
+prelink_cmds_FC \
+prelink_cmds_GO \
+prelink_cmds_GCJ \
+prelink_cmds_RC \
+postlink_cmds_CXX \
+postlink_cmds_F77 \
+postlink_cmds_FC \
+postlink_cmds_GO \
+postlink_cmds_GCJ \
+postlink_cmds_RC; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h:config-h.in" ;;
+    "tests/atconfig") CONFIG_COMMANDS="$CONFIG_COMMANDS tests/atconfig" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "tests/atconfig":C) cat >tests/atconfig <<ATEOF
+# Configurable variable values for building test suites.
+# Generated by $0.
+# Copyright (C) 2010 Free Software Foundation, Inc.
+
+# The test suite will define top_srcdir=$at_top_srcdir/../.. etc.
+at_testdir='tests'
+abs_builddir='$ac_abs_builddir'
+at_srcdir='$ac_srcdir'
+abs_srcdir='$ac_abs_srcdir'
+at_top_srcdir='$ac_top_srcdir'
+abs_top_srcdir='$ac_abs_top_srcdir'
+at_top_build_prefix='$ac_top_build_prefix'
+abs_top_builddir='$ac_abs_top_builddir'
+
+# Backward compatibility with Autotest <= 2.59b:
+at_top_builddir=\$at_top_build_prefix
+
+AUTOTEST_PATH='tests'
+
+SHELL=\${CONFIG_SHELL-'$SHELL'}
+ATEOF
+ ;;
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="CXX F77 FC GO GCJ RC "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Assembler program.
+AS=$lt_AS
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$lt_OBJDUMP
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: F77
+
+# The linker used to build libraries.
+LD=$lt_LD_F77
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_F77
+reload_cmds=$lt_reload_cmds_F77
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_F77
+
+# A language specific compiler.
+CC=$lt_compiler_F77
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_F77
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_F77
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_F77
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_F77
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_F77
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_F77
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_F77
+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_F77
+module_expsym_cmds=$lt_module_expsym_cmds_F77
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_F77
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_F77
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_F77
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_F77
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_F77
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_F77
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_F77
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_F77
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_F77
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_F77
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_F77
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_F77
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_F77
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_F77
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_F77
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_F77
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_F77
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_F77
+postdep_objects=$lt_postdep_objects_F77
+predeps=$lt_predeps_F77
+postdeps=$lt_postdeps_F77
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_F77
+
+# ### END LIBTOOL TAG CONFIG: F77
+_LT_EOF
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: FC
+
+# The linker used to build libraries.
+LD=$lt_LD_FC
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_FC
+reload_cmds=$lt_reload_cmds_FC
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_FC
+
+# A language specific compiler.
+CC=$lt_compiler_FC
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_FC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_FC
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_FC
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_FC
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_FC
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_FC
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_FC
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_FC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_FC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_FC
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_FC
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_FC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_FC
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_FC
+archive_expsym_cmds=$lt_archive_expsym_cmds_FC
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_FC
+module_expsym_cmds=$lt_module_expsym_cmds_FC
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_FC
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_FC
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_FC
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_FC
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_FC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_FC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_FC
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_FC
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_FC
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_FC
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_FC
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_FC
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_FC
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_FC
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_FC
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_FC
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_FC
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_FC
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_FC
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_FC
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_FC
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_FC
+postdep_objects=$lt_postdep_objects_FC
+predeps=$lt_predeps_FC
+postdeps=$lt_postdeps_FC
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_FC
+
+# ### END LIBTOOL TAG CONFIG: FC
+_LT_EOF
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: GO
+
+# The linker used to build libraries.
+LD=$lt_LD_GO
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_GO
+reload_cmds=$lt_reload_cmds_GO
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_GO
+
+# A language specific compiler.
+CC=$lt_compiler_GO
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_GO
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GO
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_GO
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_GO
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_GO
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GO
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_GO
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GO
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GO
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GO
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_GO
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GO
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GO
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_GO
+archive_expsym_cmds=$lt_archive_expsym_cmds_GO
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_GO
+module_expsym_cmds=$lt_module_expsym_cmds_GO
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_GO
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_GO
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_GO
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GO
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GO
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_GO
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_GO
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_GO
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_GO
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_GO
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_GO
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_GO
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_GO
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_GO
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_GO
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_GO
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_GO
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_GO
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_GO
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_GO
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GO
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_GO
+postdep_objects=$lt_postdep_objects_GO
+predeps=$lt_predeps_GO
+postdeps=$lt_postdeps_GO
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_GO
+
+# ### END LIBTOOL TAG CONFIG: GO
+_LT_EOF
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: GCJ
+
+# The linker used to build libraries.
+LD=$lt_LD_GCJ
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_GCJ
+reload_cmds=$lt_reload_cmds_GCJ
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_GCJ
+
+# A language specific compiler.
+CC=$lt_compiler_GCJ
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_GCJ
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_GCJ
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_GCJ
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_GCJ
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_GCJ
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_GCJ
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_GCJ
+archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_GCJ
+module_expsym_cmds=$lt_module_expsym_cmds_GCJ
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_GCJ
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_GCJ
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_GCJ
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_GCJ
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_GCJ
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_GCJ
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_GCJ
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_GCJ
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_GCJ
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_GCJ
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_GCJ
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_GCJ
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_GCJ
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_GCJ
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_GCJ
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_GCJ
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_GCJ
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_GCJ
+postdep_objects=$lt_postdep_objects_GCJ
+predeps=$lt_predeps_GCJ
+postdeps=$lt_postdeps_GCJ
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
+
+# ### END LIBTOOL TAG CONFIG: GCJ
+_LT_EOF
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: RC
+
+# The linker used to build libraries.
+LD=$lt_LD_RC
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_RC
+reload_cmds=$lt_reload_cmds_RC
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_RC
+
+# A language specific compiler.
+CC=$lt_compiler_RC
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_RC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_RC
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_RC
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_RC
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_RC
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_RC
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_RC
+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_RC
+module_expsym_cmds=$lt_module_expsym_cmds_RC
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_RC
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_RC
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_RC
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_RC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_RC
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_RC
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_RC
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_RC
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_RC
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_RC
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_RC
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_RC
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_RC
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_RC
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_RC
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_RC
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_RC
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_RC
+postdep_objects=$lt_postdep_objects_RC
+predeps=$lt_predeps_RC
+postdeps=$lt_postdeps_RC
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_RC
+
+# ### END LIBTOOL TAG CONFIG: RC
+_LT_EOF
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/configure.ac b/configure.ac
new file mode 100644
index 0000000..c2a6b85
--- /dev/null
+++ b/configure.ac
@@ -0,0 +1,254 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+
+#   Copyright (C) 2001, 2004, 2005, 2008, 2010 Free Software Foundation,
+#   Inc.
+#   Written by Gary V. Vaughan, 2001
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AC_PREREQ(2.62)dnl Some m4sh scripts use $as_echo
+dnl Oldest automake required for bootstrap is below in AM_INIT_AUTOMAKE.
+
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([GNU Libtool], [2.4.2], [bug-libtool@gnu.org])
+m4_ifndef([AC_PACKAGE_URL],
+	  [AC_SUBST([PACKAGE_URL], [http://www.gnu.org/software/libtool/])])
+AC_CONFIG_HEADERS([config.h:config-h.in])
+AC_CONFIG_SRCDIR([libtoolize.in])
+LT_CONFIG_LTDL_DIR([libltdl], [nonrecursive])
+AC_CONFIG_AUX_DIR([libltdl/config])
+AC_CONFIG_MACRO_DIR([libltdl/m4])
+AC_CONFIG_LIBOBJ_DIR([libltdl])
+
+
+## ------------------------ ##
+## Autotest initialisation. ##
+## ------------------------ ##
+
+AC_CONFIG_TESTDIR([tests])
+AC_SUBST([AUTOM4TE], [${AUTOM4TE=autom4te}])
+AC_SUBST([AUTOTEST], ['$(AUTOM4TE) --language=autotest'])
+
+
+## ---------------------------------------- ##
+## Display a configure time version banner. ##
+## ---------------------------------------- ##
+
+# Calculating the previous version is somewhat involved, so do it once
+# here, and SUBST the result for the maintainer release rules.  The
+# versioning scheme we use is described here:
+#	http://www.gnu.org/software/libtool/contribute.html
+
+# First we break the version number up into its constituent parts.
+lt_major=`echo "AC_PACKAGE_VERSION" | sed ['s,\..*$,,g']`
+lt_minor=`echo "AC_PACKAGE_VERSION" | sed ['s,^[0-9]*\.\([0-9]*\).*$,\1,']`
+lt_micro=`echo "AC_PACKAGE_VERSION" | sed ['s,^[0-9]*\.[0-9]*\(\.[0-9]*\).*$,\1,']`
+lt_alpha=`echo "AC_PACKAGE_VERSION" | sed ['s,^[0-9.]*,,']`
+
+test "$lt_minor" = "AC_PACKAGE_VERSION" && lt_minor=0
+test "$lt_micro" = "AC_PACKAGE_VERSION" && lt_micro=""
+
+# Then we try to work out what the release before this one would have been
+# numbered.  The only time we come unstuck is when this is the first release
+# from a stable branch (lt_micro=lt_alpha=""), so LASTRELEASE is the last
+# release from the old stable branch, and we don't know what version that
+# was, so leave it unset so that the Makefile can complain.
+case $lt_alpha in
+  [[ab]])
+    case $lt_micro in
+      [.[01]])
+	LASTRELEASE="$lt_major.$lt_minor" ;;
+      *)
+	LASTRELEASE="$lt_major.$lt_minor$lt_micro" ;;
+    esac
+    ;;
+  [[cegikmoqsuwy]])
+    LASTRELEASE=`echo "AC_PACKAGE_VERSION" | tr 'c-y' 'b-w'` ;;
+  [[dfhjlnprtvxz]])
+    LASTRELEASE=`echo "AC_PACKAGE_VERSION" | tr 'd-z' 'b-x'` ;;
+  *) # No lt_alpha component
+    case $lt_micro in
+      .0)
+	LASTRELEASE="" ;;
+      .1)
+        LASTRELEASE="$lt_major.$lt_minor" ;;
+      .*)
+	lt_micro_value=`echo $lt_micro | sed 's,^\.,,'`
+	LASTRELEASE="$lt_major.$lt_minor.`expr $lt_micro_value - 1`" ;;
+      *)
+	LASTRELEASE="" ;;
+    esac
+    ;;
+esac
+AC_SUBST([LASTRELEASE])
+
+# This is a sanity check so we can see which version is used in bug reports.
+# It is assumed that we only want to see the date extension for cvs libtool
+# versions (i.e. "odd" letters) and not actual alpha releases.
+TIMESTAMP=`${CONFIG_SHELL} ${ac_aux_dir}/mkstamp ${srcdir}`
+package_revision=`( set $TIMESTAMP; echo $1; )`
+case $lt_alpha in
+  ""|[[bdfhjlnprtvxz]])
+    TIMESTAMP=
+    ;;
+esac
+timestamp_string="${TIMESTAMP:+ (Build:$TIMESTAMP)}"
+AS_BOX([Configuring AC_PACKAGE_TARNAME$timestamp_string AC_PACKAGE_VERSION])
+echo
+AC_SUBST([TIMESTAMP])
+AC_SUBST([package_revision])
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+
+dnl These are bootstrap requirements! Once built, libtool may work with
+dnl much older releases of autoconf and automake.  See release notes.
+dnl 1.11 is needed for color-tests, 1.11.1 fixes a security issue.
+AM_INIT_AUTOMAKE([1.11.1 gnu subdir-objects dist-xz color-tests parallel-tests])
+
+
+## ------------------------- ##
+## Autobuild initialisation. ##
+## ------------------------- ##
+
+# You can set autobuild_mode at configure time to specify a "unique"
+# string for this build.
+: ${autobuild_mode=default}
+AB_VERSION="AC_PACKAGE_VERSION ($TIMESTAMP)"
+AB_INIT([$autobuild_mode])
+
+
+dnl We use m4sh to generate libtool's portable shell scripts
+AC_SUBST([M4SH], ['$(AUTOM4TE) --language=m4sh'])
+
+dnl Make sure config.status is regenerated when the version timestamp changes
+AC_SUBST([CONFIG_STATUS_DEPENDENCIES], ['$(top_srcdir)/ChangeLog'])
+
+
+## ------------------------------- ##
+## Libtool specific configuration. ##
+## ------------------------------- ##
+
+AC_SUBST([aclocaldir], ["\${datadir}/aclocal"])
+AC_SUBST([pkgdatadir], ["\${datadir}/$PACKAGE"])
+
+AC_ARG_ENABLE(ltdl-install,
+    [AS_HELP_STRING([--disable-ltdl-install], [do not install libltdl])])
+if test x"${enable_ltdl_install+set}" != xset; then
+  enable_ltdl_install=yes
+fi
+
+# All subdirectories that are configured on demand, but that must be
+# included in the distribution.
+CONF_SUBDIRS="tests/cdemo tests/demo tests/depdemo tests/f77demo tests/fcdemo \
+	tests/mdemo tests/mdemo2 tests/pdemo tests/tagdemo"
+AC_SUBST([CONF_SUBDIRS])
+
+DIST_MAKEFILE_LIST=
+for dir in $CONF_SUBDIRS; do
+  DIST_MAKEFILE_LIST="${DIST_MAKEFILE_LIST}$dir/Makefile "
+done
+AC_SUBST([DIST_MAKEFILE_LIST])
+
+
+## ---------------- ##
+## compiler checks. ##
+## ---------------- ##
+
+# Need to be sure that we have a working C compiler, otherwise even with
+# a good C compiler: if the following C++ tests fail, the whole libtool
+# build fails!
+AC_PROG_CC
+AM_PROG_CC_C_O
+AC_PROG_CPP
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LT_INIT([dlopen win32-dll])
+_LT_SET_OPTION([LTDL_INIT], [nonrecursive])
+_LTDL_SETUP
+
+# Enable all the language support we can
+LT_LANG(C++)
+LT_LANG(Fortran 77)
+LT_LANG(Fortran)
+LT_LANG(Go)
+LT_LANG(Java)
+LT_LANG(Windows Resource)
+
+# Ensure the correct file name (and path) conversion function
+# is available to the test suite.
+AC_SUBST([to_host_file_cmd])dnl
+AC_SUBST([to_tool_file_cmd])dnl
+
+## --------------------------- ##
+## Work out which tests to run ##
+## --------------------------- ##
+AM_CONDITIONAL(HAVE_CXX,[test -n "[$]_LT_TAGVAR(compiler, CXX)"])
+AM_CONDITIONAL(HAVE_F77,[test -n "[$]_LT_TAGVAR(compiler, F77)"])
+AM_CONDITIONAL(HAVE_FC,[test -n "[$]_LT_TAGVAR(compiler, FC)"])
+AM_CONDITIONAL(HAVE_GCJ, [test -n "[$]_LT_TAGVAR(compiler, GCJ)"])
+AM_CONDITIONAL(HAVE_RC, [test -n "[$]_LT_TAGVAR(compiler, RC)"])
+
+## Whether `make' supports order-only prerequisites.
+AC_CACHE_CHECK([whether ${MAKE-make} supports order-only prerequisites],
+  [lt_cv_make_order_only],
+  [mkdir conftest.dir
+   cd conftest.dir
+   touch b
+   touch a
+cat >confmk << 'END'
+a: b | c
+a b c:
+	touch $[]@
+END
+   touch c
+   if ${MAKE-make} -s -q -f confmk >/dev/null 2>&1; then
+     lt_cv_make_order_only=yes
+   else
+     lt_cv_make_order_only=no
+   fi
+   cd ..
+   rm -rf conftest.dir
+])
+if test $lt_cv_make_order_only = yes; then
+  ORDER='|'
+else
+  ORDER=''
+fi
+AC_SUBST([ORDER])
+
+## ------------- ##
+## Documentation ##
+## ------------- ##
+AM_MISSING_PROG([HELP2MAN], [help2man])
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/doc/PLATFORMS b/doc/PLATFORMS
new file mode 100644
index 0000000..a724144
--- /dev/null
+++ b/doc/PLATFORMS
@@ -0,0 +1,162 @@
+-------------------------------------------------------
+canonical host name          compiler  libtool results
+  (tools versions)                     release
+-------------------------------------------------------
+alpha-dec-osf5.1		cc	 1.3e	  ok (1.910)
+alpha-dec-osf4.0f               gcc      1.3e     ok (1.910)
+alpha-dec-osf4.0f               cc       1.3e     ok (1.910)
+alpha-dec-osf3.2                gcc      0.8      ok
+alpha-dec-osf3.2                cc       0.8      ok
+alpha-dec-osf2.1                gcc      1.2f     NS
+alpha*-unknown-linux-gnu        gcc      1.3b     ok
+  (egcs-1.1.2, GNU ld 2.9.1.0.23)
+hppa2.0w-hp-hpux11.00           cc       1.2f     ok
+hppa2.0-hp-hpux10.20            cc       1.3.2    ok
+hppa1.1-hp-hpux10.20            gcc      1.2f     ok
+hppa1.1-hp-hpux10.20            cc       1.3c     ok (1.821)
+hppa1.1-hp-hpux10.10            gcc      1.2f     ok
+hppa1.1-hp-hpux10.10            cc       1.2f     ok
+hppa1.1-hp-hpux9.07             gcc      1.2f     ok
+hppa1.1-hp-hpux9.07             cc       1.2f     ok
+hppa1.1-hp-hpux9.05             gcc      1.2f     ok
+hppa1.1-hp-hpux9.05             cc       1.2f     ok
+hppa1.1-hp-hpux9.01             gcc      1.2f     ok
+hppa1.1-hp-hpux9.01             cc       1.2f     ok
+i*86-*-beos                     gcc      1.2f     ok
+i*86-*-bsdi4.0.1                gcc      1.3c     ok
+  (gcc-2.7.2.1)
+i*86-*-bsdi4.0                  gcc      1.2f     ok
+i*86-*-bsdi3.1                  gcc      1.2e     NS
+i*86-*-bsdi3.0                  gcc      1.2e     NS
+i*86-*-bsdi2.1                  gcc      1.2e     NS
+i*86-pc-cygwin                  gcc      1.3b     NS
+  (egcs-1.1 stock b20.1 compiler)
+i*86-*-dguxR4.20MU01            gcc      1.2      ok
+i*86-*-freebsd4.3		gcc      1.3e     ok (1.912)
+i*86-*-freebsdelf4.0            gcc      1.3c     ok
+  (egcs-1.1.2)
+i*86-*-freebsdelf3.2            gcc      1.3c     ok
+  (gcc-2.7.2.1)
+i*86-*-freebsdelf3.1            gcc      1.3c     ok
+  (gcc-2.7.2.1)
+i*86-*-freebsdelf3.0            gcc      1.3c     ok
+i*86-*-freebsd3.0               gcc      1.2e     ok
+i*86-*-freebsd2.2.8             gcc      1.3c     ok
+  (gcc-2.7.2.1)
+i*86-*-freebsd2.2.6             gcc      1.3b     ok
+  (egcs-1.1 & gcc-2.7.2.1, native ld)
+i*86-*-freebsd2.1.5             gcc      0.5      ok
+i*86-*-netbsd1.5                gcc      1.3e     ok (1.901)
+  (egcs-1.1.2)
+i*86-*-netbsd1.4                gcc      1.3c     ok
+  (egcs-1.1.1)
+i*86-*-netbsd1.4.3A             gcc      1.3e     ok (1.901)
+i*86-*-netbsd1.3.3              gcc      1.3c     ok
+  (gcc-2.7.2.2+myc2)
+i*86-*-netbsd1.3.2              gcc      1.2e     ok
+i*86-*-netbsd1.3I               gcc      1.2e     ok
+  (egcs 1.1?)
+i*86-*-netbsd1.2                gcc      0.9g     ok
+i*86-*-linux-gnu		gcc	 1.3e	  ok (1.901)
+  (Red Hat 7.0, gcc "2.96")
+i*86-*-linux-gnu		gcc	 1.3e	  ok (1.911)
+  (SuSE 7.0, gcc 2.95.2)
+i*86-*-linux-gnulibc1           gcc      1.2f     ok
+i*86-*-openbsd2.5               gcc      1.3c     ok
+  (gcc-2.8.1)
+i*86-*-openbsd2.4               gcc      1.3c     ok
+  (gcc-2.8.1)
+i*86-*-solaris2.7               gcc      1.3b     ok
+  (egcs-1.1.2, native ld)
+i*86-*-solaris2.6               gcc      1.2f     ok
+i*86-*-solaris2.5.1             gcc      1.2f     ok
+i*86-ncr-sysv4.3.03             gcc      1.2f     ok
+i*86-ncr-sysv4.3.03             cc       1.2e     ok
+  (cc -Hnocopyr)
+i*86-pc-sco3.2v5.0.5		cc	 1.3c	  ok
+i*86-pc-sco3.2v5.0.5		gcc	 1.3c	  ok
+  (gcc 95q4c)
+i*86-pc-sco3.2v5.0.5		gcc	 1.3c	  ok
+  (egcs-1.1.2)
+i*86-sco-sysv5uw7.1.1		gcc	 1.3e	  ok (1.901)
+  (gcc-2.95.2, SCO linker)
+i*86-UnixWare7.1.0-sysv5	cc	 1.3c	  ok
+i*86-UnixWare7.1.0-sysv5	gcc	 1.3c	  ok
+  (egcs-1.1.1)
+m68k-next-nextstep3             gcc      1.2f     NS
+m68k-sun-sunos4.1.1             gcc      1.2f     NS
+  (gcc-2.5.7)
+m88k-dg-dguxR4.12TMU01          gcc      1.2      ok
+m88k-motorola-sysv4             gcc      1.3      ok
+  (egcs-1.1.2)
+mips-sgi-irix6.5                gcc      1.2f     ok
+  (gcc-2.8.1)
+mips-sgi-irix6.4                gcc      1.2f     ok
+mips-sgi-irix6.3                gcc      1.3b     ok
+  (egcs-1.1.2, native ld)
+mips-sgi-irix6.3                cc       1.3b     ok
+  (cc 7.0)
+mips-sgi-irix6.2                gcc      1.2f     ok
+mips-sgi-irix6.2                cc       0.9      ok
+mips-sgi-irix5.3                gcc      1.2f     ok
+  (egcs-1.1.1)
+mips-sgi-irix5.3                gcc      1.2f     NS
+  (gcc-2.6.3)
+mips-sgi-irix5.3                cc       0.8      ok
+mips-sgi-irix5.2                gcc      1.3b     ok
+  (egcs-1.1.2, native ld)
+mips-sgi-irix5.2                cc       1.3b     ok
+  (cc 3.18)
+mips-sni-sysv4			cc       1.3.5    ok
+  (Siemens C-compiler)
+mips-sni-sysv4			gcc      1.3.5    ok
+  (gcc-2.7.2.3, GNU assembler 2.8.1, native ld) 
+mipsel-unknown-openbsd2.1       gcc      1.0      ok
+powerpc-apple-darwin6.4         gcc      1.5      ok
+(apple dev tools released 12/2002)
+powerpc-ibm-aix4.3.1.0          gcc      1.2f     ok
+  (egcs-1.1.1)
+powerpc-ibm-aix4.2.1.0          gcc      1.2f     ok
+  (egcs-1.1.1)
+powerpc-ibm-aix4.1.5.0          gcc      1.2f     ok
+  (egcs-1.1.1)
+powerpc-ibm-aix4.1.5.0          gcc      1.2f     NS
+  (gcc-2.8.1)
+powerpc-ibm-aix4.1.4.0          gcc      1.0      ok
+powerpc-ibm-aix4.1.4.0          xlc      1.0i     ok
+rs6000-ibm-aix4.1.5.0           gcc      1.2f     ok
+  (gcc-2.7.2)
+rs6000-ibm-aix4.1.4.0           gcc      1.2f     ok
+  (gcc-2.7.2)
+rs6000-ibm-aix3.2.5             gcc      1.0i     ok
+rs6000-ibm-aix3.2.5             xlc      1.0i     ok
+sparc-sun-solaris2.8		gcc	 1.3e	  ok (1.913)
+  (gcc-2.95.3 & native ld)
+sparc-sun-solaris2.7            gcc      1.3e     ok (1.913)
+  (gcc-2.95.3 & native ld)
+sparc-sun-solaris2.6            gcc      1.3e     ok (1.913)
+  (gcc-2.95.3 & native ld)
+sparc-sun-solaris2.5.1          gcc      1.3e     ok (1.911)
+sparc-sun-solaris2.5            gcc      1.3b     ok
+  (egcs-1.1.2, GNU ld 2.9.1 & native ld)
+sparc-sun-solaris2.5            cc       1.3b     ok
+  (SC 3.0.1)
+sparc-sun-solaris2.4            gcc      1.0a     ok
+sparc-sun-solaris2.4            cc       1.0a     ok
+sparc-sun-solaris2.3            gcc      1.2f     ok
+sparc-sun-sunos4.1.4            gcc      1.2f     ok
+sparc-sun-sunos4.1.4            cc       1.0f     ok
+sparc-sun-sunos4.1.3_U1         gcc      1.2f     ok
+sparc-sun-sunos4.1.3C           gcc      1.2f     ok
+sparc-sun-sunos4.1.3            gcc      1.3b     ok
+  (egcs-1.1.2, GNU ld 2.9.1 & native ld)
+sparc-sun-sunos4.1.3            cc       1.3b     ok
+sparc-unknown-bsdi4.0           gcc      1.2c     ok
+sparc-unknown-linux-gnulibc1    gcc      1.2f     ok
+sparc-unknown-linux-gnu         gcc      1.3b     ok
+  (egcs-1.1.2, GNU ld 2.9.1.0.23)
+sparc64-unknown-linux-gnu       gcc      1.2f     ok
+
+Notes:
+- "ok" means "all tests passed".
+- "NS" means "Not Shared", but OK for static libraries
diff --git a/doc/fdl.texi b/doc/fdl.texi
new file mode 100644
index 0000000..8805f1a
--- /dev/null
+++ b/doc/fdl.texi
@@ -0,0 +1,506 @@
+@c The GNU Free Documentation License.
+@center Version 1.3, 3 November 2008
+
+@c This file is intended to be included within another document,
+@c hence no sectioning command or @node.
+
+@display
+Copyright @copyright{} 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+@uref{http://fsf.org/}
+
+Everyone is permitted to copy and distribute verbatim copies
+of this license document, but changing it is not allowed.
+@end display
+
+@enumerate 0
+@item
+PREAMBLE
+
+The purpose of this License is to make a manual, textbook, or other
+functional and useful document @dfn{free} in the sense of freedom: to
+assure everyone the effective freedom to copy and redistribute it,
+with or without modifying it, either commercially or noncommercially.
+Secondarily, this License preserves for the author and publisher a way
+to get credit for their work, while not being considered responsible
+for modifications made by others.
+
+This License is a kind of ``copyleft'', which means that derivative
+works of the document must themselves be free in the same sense.  It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does.  But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book.  We recommend this License
+principally for works whose purpose is instruction or reference.
+
+@item
+APPLICABILITY AND DEFINITIONS
+
+This License applies to any manual or other work, in any medium, that
+contains a notice placed by the copyright holder saying it can be
+distributed under the terms of this License.  Such a notice grants a
+world-wide, royalty-free license, unlimited in duration, to use that
+work under the conditions stated herein.  The ``Document'', below,
+refers to any such manual or work.  Any member of the public is a
+licensee, and is addressed as ``you''.  You accept the license if you
+copy, modify or distribute the work in a way requiring permission
+under copyright law.
+
+A ``Modified Version'' of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+A ``Secondary Section'' is a named appendix or a front-matter section
+of the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document's overall
+subject (or to related matters) and contains nothing that could fall
+directly within that overall subject.  (Thus, if the Document is in
+part a textbook of mathematics, a Secondary Section may not explain
+any mathematics.)  The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+
+The ``Invariant Sections'' are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License.  If a
+section does not fit the above definition of Secondary then it is not
+allowed to be designated as Invariant.  The Document may contain zero
+Invariant Sections.  If the Document does not identify any Invariant
+Sections then there are none.
+
+The ``Cover Texts'' are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License.  A Front-Cover Text may
+be at most 5 words, and a Back-Cover Text may be at most 25 words.
+
+A ``Transparent'' copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, that is suitable for revising the document
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters.  A copy made in an otherwise Transparent file
+format whose markup, or absence of markup, has been arranged to thwart
+or discourage subsequent modification by readers is not Transparent.
+An image format is not Transparent if used for any substantial amount
+of text.  A copy that is not ``Transparent'' is called ``Opaque''.
+
+Examples of suitable formats for Transparent copies include plain
+@sc{ascii} without markup, Texinfo input format, La@TeX{} input
+format, @acronym{SGML} or @acronym{XML} using a publicly available
+@acronym{DTD}, and standard-conforming simple @acronym{HTML},
+PostScript or @acronym{PDF} designed for human modification.  Examples
+of transparent image formats include @acronym{PNG}, @acronym{XCF} and
+@acronym{JPG}.  Opaque formats include proprietary formats that can be
+read and edited only by proprietary word processors, @acronym{SGML} or
+@acronym{XML} for which the @acronym{DTD} and/or processing tools are
+not generally available, and the machine-generated @acronym{HTML},
+PostScript or @acronym{PDF} produced by some word processors for
+output purposes only.
+
+The ``Title Page'' means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page.  For works in
+formats which do not have any title page as such, ``Title Page'' means
+the text near the most prominent appearance of the work's title,
+preceding the beginning of the body of the text.
+
+The ``publisher'' means any person or entity that distributes copies
+of the Document to the public.
+
+A section ``Entitled XYZ'' means a named subunit of the Document whose
+title either is precisely XYZ or contains XYZ in parentheses following
+text that translates XYZ in another language.  (Here XYZ stands for a
+specific section name mentioned below, such as ``Acknowledgements'',
+``Dedications'', ``Endorsements'', or ``History''.)  To ``Preserve the Title''
+of such a section when you modify the Document means that it remains a
+section ``Entitled XYZ'' according to this definition.
+
+The Document may include Warranty Disclaimers next to the notice which
+states that this License applies to the Document.  These Warranty
+Disclaimers are considered to be included by reference in this
+License, but only as regards disclaiming warranties: any other
+implication that these Warranty Disclaimers may have is void and has
+no effect on the meaning of this License.
+
+@item
+VERBATIM COPYING
+
+You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no other
+conditions whatsoever to those of this License.  You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute.  However, you may accept
+compensation in exchange for copies.  If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+@item
+COPYING IN QUANTITY
+
+If you publish printed copies (or copies in media that commonly have
+printed covers) of the Document, numbering more than 100, and the
+Document's license notice requires Cover Texts, you must enclose the
+copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover.  Both covers must also clearly and legibly identify
+you as the publisher of these copies.  The front cover must present
+the full title with all words of the title equally prominent and
+visible.  You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a computer-network location from which the general network-using
+public has access to download using public-standard network protocols
+a complete Transparent copy of the Document, free of added material.
+If you use the latter option, you must take reasonably prudent steps,
+when you begin distribution of Opaque copies in quantity, to ensure
+that this Transparent copy will remain thus accessible at the stated
+location until at least one year after the last time you distribute an
+Opaque copy (directly or through your agents or retailers) of that
+edition to the public.
+
+It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to give
+them a chance to provide you with an updated version of the Document.
+
+@item
+MODIFICATIONS
+
+You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it.  In addition, you must do these things in the Modified Version:
+
+@enumerate A
+@item
+Use in the Title Page (and on the covers, if any) a title distinct
+from that of the Document, and from those of previous versions
+(which should, if there were any, be listed in the History section
+of the Document).  You may use the same title as a previous version
+if the original publisher of that version gives permission.
+
+@item
+List on the Title Page, as authors, one or more persons or entities
+responsible for authorship of the modifications in the Modified
+Version, together with at least five of the principal authors of the
+Document (all of its principal authors, if it has fewer than five),
+unless they release you from this requirement.
+
+@item
+State on the Title page the name of the publisher of the
+Modified Version, as the publisher.
+
+@item
+Preserve all the copyright notices of the Document.
+
+@item
+Add an appropriate copyright notice for your modifications
+adjacent to the other copyright notices.
+
+@item
+Include, immediately after the copyright notices, a license notice
+giving the public permission to use the Modified Version under the
+terms of this License, in the form shown in the Addendum below.
+
+@item
+Preserve in that license notice the full lists of Invariant Sections
+and required Cover Texts given in the Document's license notice.
+
+@item
+Include an unaltered copy of this License.
+
+@item
+Preserve the section Entitled ``History'', Preserve its Title, and add
+to it an item stating at least the title, year, new authors, and
+publisher of the Modified Version as given on the Title Page.  If
+there is no section Entitled ``History'' in the Document, create one
+stating the title, year, authors, and publisher of the Document as
+given on its Title Page, then add an item describing the Modified
+Version as stated in the previous sentence.
+
+@item
+Preserve the network location, if any, given in the Document for
+public access to a Transparent copy of the Document, and likewise
+the network locations given in the Document for previous versions
+it was based on.  These may be placed in the ``History'' section.
+You may omit a network location for a work that was published at
+least four years before the Document itself, or if the original
+publisher of the version it refers to gives permission.
+
+@item
+For any section Entitled ``Acknowledgements'' or ``Dedications'', Preserve
+the Title of the section, and preserve in the section all the
+substance and tone of each of the contributor acknowledgements and/or
+dedications given therein.
+
+@item
+Preserve all the Invariant Sections of the Document,
+unaltered in their text and in their titles.  Section numbers
+or the equivalent are not considered part of the section titles.
+
+@item
+Delete any section Entitled ``Endorsements''.  Such a section
+may not be included in the Modified Version.
+
+@item
+Do not retitle any existing section to be Entitled ``Endorsements'' or
+to conflict in title with any Invariant Section.
+
+@item
+Preserve any Warranty Disclaimers.
+@end enumerate
+
+If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant.  To do this, add their titles to the
+list of Invariant Sections in the Modified Version's license notice.
+These titles must be distinct from any other section titles.
+
+You may add a section Entitled ``Endorsements'', provided it contains
+nothing but endorsements of your Modified Version by various
+parties---for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+
+You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version.  Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity.  If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+
+The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+
+@item
+COMBINING DOCUMENTS
+
+You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice, and that you preserve all their Warranty Disclaimers.
+
+The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy.  If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections Entitled ``History''
+in the various original documents, forming one section Entitled
+``History''; likewise combine any sections Entitled ``Acknowledgements'',
+and any sections Entitled ``Dedications''.  You must delete all
+sections Entitled ``Endorsements.''
+
+@item
+COLLECTIONS OF DOCUMENTS
+
+You may make a collection consisting of the Document and other documents
+released under this License, and replace the individual copies of this
+License in the various documents with a single copy that is included in
+the collection, provided that you follow the rules of this License for
+verbatim copying of each of the documents in all other respects.
+
+You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+
+@item
+AGGREGATION WITH INDEPENDENT WORKS
+
+A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, is called an ``aggregate'' if the copyright
+resulting from the compilation is not used to limit the legal rights
+of the compilation's users beyond what the individual works permit.
+When the Document is included in an aggregate, this License does not
+apply to the other works in the aggregate which are not themselves
+derivative works of the Document.
+
+If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one half of
+the entire aggregate, the Document's Cover Texts may be placed on
+covers that bracket the Document within the aggregate, or the
+electronic equivalent of covers if the Document is in electronic form.
+Otherwise they must appear on printed covers that bracket the whole
+aggregate.
+
+@item
+TRANSLATION
+
+Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections.  You may include a
+translation of this License, and all the license notices in the
+Document, and any Warranty Disclaimers, provided that you also include
+the original English version of this License and the original versions
+of those notices and disclaimers.  In case of a disagreement between
+the translation and the original version of this License or a notice
+or disclaimer, the original version will prevail.
+
+If a section in the Document is Entitled ``Acknowledgements'',
+``Dedications'', or ``History'', the requirement (section 4) to Preserve
+its Title (section 1) will typically require changing the actual
+title.
+
+@item
+TERMINATION
+
+You may not copy, modify, sublicense, or distribute the Document
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense, or distribute it is void, and
+will automatically terminate your rights under this License.
+
+However, if you cease all violation of this License, then your license
+from a particular copyright holder is reinstated (a) provisionally,
+unless and until the copyright holder explicitly and finally
+terminates your license, and (b) permanently, if the copyright holder
+fails to notify you of the violation by some reasonable means prior to
+60 days after the cessation.
+
+Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, receipt of a copy of some or all of the same material does
+not give you any rights to use it.
+
+@item
+FUTURE REVISIONS OF THIS LICENSE
+
+The Free Software Foundation may publish new, revised versions
+of the GNU Free Documentation License from time to time.  Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.  See
+@uref{http://www.gnu.org/copyleft/}.
+
+Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License ``or any later version'' applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation.  If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.  If the Document
+specifies that a proxy can decide which future versions of this
+License can be used, that proxy's public statement of acceptance of a
+version permanently authorizes you to choose that version for the
+Document.
+
+@item
+RELICENSING
+
+``Massive Multiauthor Collaboration Site'' (or ``MMC Site'') means any
+World Wide Web server that publishes copyrightable works and also
+provides prominent facilities for anybody to edit those works.  A
+public wiki that anybody can edit is an example of such a server.  A
+``Massive Multiauthor Collaboration'' (or ``MMC'') contained in the
+site means any set of copyrightable works thus published on the MMC
+site.
+
+``CC-BY-SA'' means the Creative Commons Attribution-Share Alike 3.0
+license published by Creative Commons Corporation, a not-for-profit
+corporation with a principal place of business in San Francisco,
+California, as well as future copyleft versions of that license
+published by that same organization.
+
+``Incorporate'' means to publish or republish a Document, in whole or
+in part, as part of another Document.
+
+An MMC is ``eligible for relicensing'' if it is licensed under this
+License, and if all works that were first published under this License
+somewhere other than this MMC, and subsequently incorporated in whole
+or in part into the MMC, (1) had no cover texts or invariant sections,
+and (2) were thus incorporated prior to November 1, 2008.
+
+The operator of an MMC Site may republish an MMC contained in the site
+under CC-BY-SA on the same site at any time before August 1, 2009,
+provided the MMC is eligible for relicensing.
+
+@end enumerate
+
+@page
+@heading ADDENDUM: How to use this License for your documents
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+
+@smallexample
+@group
+  Copyright (C)  @var{year}  @var{your name}.
+  Permission is granted to copy, distribute and/or modify this document
+  under the terms of the GNU Free Documentation License, Version 1.3
+  or any later version published by the Free Software Foundation;
+  with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+  Texts.  A copy of the license is included in the section entitled ``GNU
+  Free Documentation License''.
+@end group
+@end smallexample
+
+If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts,
+replace the ``with@dots{}Texts.'' line with this:
+
+@smallexample
+@group
+    with the Invariant Sections being @var{list their titles}, with
+    the Front-Cover Texts being @var{list}, and with the Back-Cover Texts
+    being @var{list}.
+@end group
+@end smallexample
+
+If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
+
+@c Local Variables:
+@c ispell-local-pdict: "ispell-dict"
+@c End:
+
diff --git a/doc/libtool.1 b/doc/libtool.1
new file mode 100644
index 0000000..08b1186
--- /dev/null
+++ b/doc/libtool.1
@@ -0,0 +1,365 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.40.4.
+.TH LIBTOOL "1" "October 2011" "libtool 2.4.2" "User Commands"
+.SH NAME
+libtool \- manual page for libtool 2.4.2
+.SH SYNOPSIS
+.B libtool
+[\fIOPTION\fR]... [\fIMODE-ARG\fR]...
+.br
+.B libtool
+[\fIOPTION\fR]... \fI--mode=compile COMPILE-COMMAND\fR... \fISOURCEFILE\fR
+.br
+.B libtool
+[\fIOPTION\fR]... \fI--mode=link LINK-COMMAND\fR...
+.br
+.B libtool
+[\fIOPTION\fR]... \fI--mode=execute COMMAND \fR[\fIARGS\fR]...
+.br
+.B libtool
+[\fIOPTION\fR]... \fI--mode=install INSTALL-COMMAND\fR...
+.br
+.B libtool
+[\fIOPTION\fR]... \fI--mode=finish \fR[\fILIBDIR\fR]...
+.br
+.B libtool
+[\fIOPTION\fR]... \fI--mode=uninstall RM \fR[\fIRM-OPTION\fR]... \fIFILE\fR...
+.br
+.B libtool
+[\fIOPTION\fR]... \fI--mode=clean RM \fR[\fIRM-OPTION\fR]... \fIFILE\fR...
+.SH DESCRIPTION
+Provide generalized library\-building support services.
+.TP
+\fB\-\-config\fR
+show all configuration variables
+.TP
+\fB\-\-debug\fR
+enable verbose shell tracing
+.TP
+\fB\-n\fR, \fB\-\-dry\-run\fR
+display commands without modifying any files
+.TP
+\fB\-\-features\fR
+display basic configuration information and exit
+.TP
+\fB\-\-mode\fR=\fIMODE\fR
+use operation mode MODE
+.TP
+\fB\-\-preserve\-dup\-deps\fR
+don't remove duplicate dependency libraries
+.TP
+\fB\-\-quiet\fR, \fB\-\-silent\fR
+don't print informational messages
+.TP
+\fB\-\-no\-quiet\fR, \fB\-\-no\-silent\fR
+print informational messages (default)
+.TP
+\fB\-\-no\-warn\fR
+don't display warning messages
+.TP
+\fB\-\-tag\fR=\fITAG\fR
+use configuration variables from tag TAG
+.TP
+\fB\-v\fR, \fB\-\-verbose\fR
+print more informational messages than default
+.TP
+\fB\-\-no\-verbose\fR
+don't print the extra informational messages
+.TP
+\fB\-\-version\fR
+print version information
+.TP
+\fB\-h\fR, \fB\-\-help\fR, \fB\-\-help\-all\fR
+print short, long, or detailed help message
+.PP
+MODE must be one of the following:
+.TP
+clean
+remove files from the build directory
+.TP
+compile
+compile a source file into a libtool object
+.TP
+execute
+automatically set library path, then run a program
+.TP
+finish
+complete the installation of libtool libraries
+.TP
+install
+install libraries or executables
+.TP
+link
+create a library or an executable
+.TP
+uninstall
+remove libraries from an installed directory
+.PP
+MODE\-ARGS vary depending on the MODE.  When passed as first option,
+`\-\-mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+.PP
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>.
+.PP
+Description of compile mode:
+.PP
+Compile a source file into a libtool library object.
+.PP
+This mode accepts the following additional options:
+.TP
+\fB\-o\fR OUTPUT\-FILE
+set the output file name to OUTPUT\-FILE
+.TP
+\fB\-no\-suppress\fR
+do not suppress compiler output for multiple passes
+.TP
+\fB\-prefer\-pic\fR
+try to build PIC objects only
+.TP
+\fB\-prefer\-non\-pic\fR
+try to build non\-PIC objects only
+.TP
+\fB\-shared\fR
+do not build a `.o' file suitable for static linking
+.TP
+\fB\-static\fR
+only build a `.o' file suitable for static linking
+.TP
+\fB\-Wc\fR,FLAG
+pass FLAG directly to the compiler
+.PP
+COMPILE\-COMMAND is a command to be used in creating a `standard' object file
+from the given SOURCEFILE.
+.PP
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix `.c' with the
+library object suffix, `.lo'.
+.PP
+Description of link mode:
+.PP
+Link object files or libraries together to form another library, or to
+create an executable program.
+.PP
+LINK\-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+.PP
+The following components of LINK\-COMMAND are treated specially:
+.TP
+\fB\-all\-static\fR
+do not do any dynamic linking at all
+.TP
+\fB\-avoid\-version\fR
+do not add a version suffix if possible
+.TP
+\fB\-bindir\fR BINDIR
+specify path to binaries directory (for systems where
+libraries must be found in the PATH setting at runtime)
+.TP
+\fB\-dlopen\fR FILE
+`\-dlpreopen' FILE if it cannot be dlopened at runtime
+.TP
+\fB\-dlpreopen\fR FILE
+link in FILE and add its symbols to lt_preloaded_symbols
+.TP
+\fB\-export\-dynamic\fR
+allow symbols from OUTPUT\-FILE to be resolved with dlsym(3)
+.TP
+\fB\-export\-symbols\fR SYMFILE
+try to export only the symbols listed in SYMFILE
+.TP
+\fB\-export\-symbols\-regex\fR REGEX
+try to export only the symbols matching REGEX
+.TP
+\fB\-LLIBDIR\fR
+search LIBDIR for required installed libraries
+.TP
+\fB\-lNAME\fR
+OUTPUT\-FILE requires the installed library libNAME
+.TP
+\fB\-module\fR
+build a library that can dlopened
+.TP
+\fB\-no\-fast\-install\fR
+disable the fast\-install mode
+.TP
+\fB\-no\-install\fR
+link a not\-installable executable
+.TP
+\fB\-no\-undefined\fR
+declare that a library does not refer to external symbols
+.TP
+\fB\-o\fR OUTPUT\-FILE
+create OUTPUT\-FILE from the specified objects
+.TP
+\fB\-objectlist\fR FILE
+Use a list of object files found in FILE to specify objects
+.TP
+\fB\-precious\-files\-regex\fR REGEX
+don't remove output files matching REGEX
+.TP
+\fB\-release\fR RELEASE
+specify package release information
+.TP
+\fB\-rpath\fR LIBDIR
+the created library will eventually be installed in LIBDIR
+.TP
+\fB\-R[\fR ]LIBDIR
+add LIBDIR to the runtime path of programs and libraries
+.TP
+\fB\-shared\fR
+only do dynamic linking of libtool libraries
+.TP
+\fB\-shrext\fR SUFFIX
+override the standard shared library file extension
+.TP
+\fB\-static\fR
+do not do any dynamic linking of uninstalled libtool libraries
+.TP
+\fB\-static\-libtool\-libs\fR
+do not do any dynamic linking of libtool libraries
+.TP
+\fB\-version\-info\fR CURRENT[:REVISION[:AGE]]
+specify library version info [each variable defaults to 0]
+.TP
+\fB\-weak\fR LIBNAME
+declare that the target provides the LIBNAME interface
+.HP
+\fB\-Wc\fR,FLAG
+.TP
+\fB\-Xcompiler\fR FLAG
+pass linker\-specific FLAG directly to the compiler
+.HP
+\fB\-Wl\fR,FLAG
+.TP
+\fB\-Xlinker\fR FLAG
+pass linker\-specific FLAG directly to the linker
+.TP
+\fB\-XCClinker\fR FLAG
+pass link\-specific FLAG to the compiler driver (CC)
+.PP
+All other options (arguments beginning with `\-') are ignored.
+.PP
+Every other argument is treated as a filename.  Files ending in `.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+.PP
+If the OUTPUT\-FILE ends in `.la', then a libtool library is created,
+only library objects (`.lo' files) may be specified, and `\-rpath' is
+required, except when creating a convenience library.
+.PP
+If OUTPUT\-FILE ends in `.a' or `.lib', then a standard library is created
+using `ar' and `ranlib', or on Windows using `lib'.
+.PP
+If OUTPUT\-FILE ends in `.lo' or `.o', then a reloadable object file
+is created, otherwise an executable program is created.
+.PP
+Description of execute mode:
+.PP
+Automatically set library path, then run a program.
+.PP
+This mode accepts the following additional options:
+.TP
+\fB\-dlopen\fR FILE
+add the directory containing FILE to the library path
+.PP
+This mode sets the library path environment variable according to `\-dlopen'
+flags.
+.PP
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+.PP
+Then, COMMAND is executed, with ARGS as arguments.
+.PP
+Description of install mode:
+.PP
+Install executables or libraries.
+.PP
+INSTALL\-COMMAND is the installation command.  The first component should be
+either the `install' or `cp' program.
+.PP
+The following components of INSTALL\-COMMAND are treated specially:
+.TP
+\fB\-inst\-prefix\-dir\fR PREFIX\-DIR
+Use PREFIX\-DIR as a staging area for installation
+.PP
+The rest of the components are interpreted as arguments to that command (only
+BSD\-compatible install options are recognized).
+.PP
+Description of finish mode:
+.PP
+Complete the installation of libtool libraries.
+.PP
+Each LIBDIR is a directory that contains libtool libraries.
+.PP
+The commands that this mode executes may require superuser privileges.  Use
+the `\-\-dry\-run' option if you just want to see what would be executed.
+.PP
+Description of uninstall mode:
+.PP
+Remove libraries from an installation directory.
+.PP
+RM is the name of the program to use to delete files associated with each FILE
+(typically `/bin/rm').  RM\-OPTIONS are options (such as `\-f') to be passed
+to RM.
+.PP
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM.
+.PP
+Description of clean mode:
+.PP
+Remove files from the build directory.
+.PP
+RM is the name of the program to use to delete files associated with each FILE
+(typically `/bin/rm').  RM\-OPTIONS are options (such as `\-f') to be passed
+to RM.
+.PP
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM.
+.PP
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+.TP
+host\-triplet:
+x86_64\-apple\-darwin11.2.0
+.TP
+shell:
+/bin/sh
+.TP
+compiler:
+gcc
+.TP
+compiler flags:
+\fB\-g\fR \fB\-O2\fR
+.TP
+linker:
+/usr/llvm\-gcc\-4.2/libexec/gcc/i686\-apple\-darwin11/4.2.1/ld (gnu? no)
+.TP
+libtool:
+(GNU libtool) 2.4.2
+.TP
+automake:
+automake (GNU automake) 1.11.1
+.TP
+autoconf:
+autoconf (GNU Autoconf) 2.68
+.SH AUTHOR
+Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+.SH "REPORTING BUGS"
+Report bugs to <bug\-libtool@gnu.org>.
+.SH COPYRIGHT
+Copyright \(co 2011 Free Software Foundation, Inc.
+.br
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+.SH "SEE ALSO"
+The full documentation for
+.B libtool
+is maintained as a Texinfo manual.  If the
+.B info
+and
+.B libtool
+programs are properly installed at your site, the command
+.IP
+.B info libtool
+.PP
+should give you access to the complete manual.
diff --git a/doc/libtool.info b/doc/libtool.info
new file mode 100644
index 0000000..9a1263a
--- /dev/null
+++ b/doc/libtool.info
@@ -0,0 +1,140 @@
+This is doc/libtool.info, produced by makeinfo version 4.13 from
+./doc/libtool.texi.
+
+INFO-DIR-SECTION GNU programming tools
+START-INFO-DIR-ENTRY
+* Libtool: (libtool).           Generic shared library support script.
+END-INFO-DIR-ENTRY
+
+INFO-DIR-SECTION Individual utilities
+START-INFO-DIR-ENTRY
+* libtool-invocation: (libtool)Invoking libtool.
+                                                Running the `libtool' script.
+* libtoolize: (libtool)Invoking libtoolize.     Adding libtool support.
+END-INFO-DIR-ENTRY
+
+   This file documents GNU Libtool 2.4.2
+
+   Copyright (C) 1996-2011 Free Software Foundation, Inc.
+
+   Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts.  A copy of the license is included in the section entitled "GNU
+Free Documentation License".
+
+
+Indirect:
+libtool.info-1: 999
+libtool.info-2: 284584
+
+Tag Table:
+(Indirect)
+Node: Top999
+Node: Introduction8193
+Node: Motivation10020
+Node: Issues11340
+Node: Other implementations12818
+Node: Postmortem13361
+Node: Libtool paradigm14981
+Node: Using libtool15926
+Node: Creating object files18029
+Node: Linking libraries21766
+Ref: Linking libraries-Footnote-125593
+Node: Linking executables25734
+Ref: Linking executables-Footnote-130985
+Ref: Linking executables-Footnote-231278
+Node: Wrapper executables31358
+Node: Debugging executables33581
+Node: Installing libraries36404
+Ref: Installing libraries-Footnote-139566
+Node: Installing executables39637
+Node: Static libraries40473
+Node: Invoking libtool43750
+Node: Compile mode49393
+Node: Link mode52354
+Node: Execute mode61728
+Node: Install mode62508
+Node: Finish mode64881
+Node: Uninstall mode65743
+Node: Clean mode66184
+Node: Integrating libtool66643
+Node: Autoconf macros69477
+Node: Makefile rules73324
+Node: Using Automake74427
+Ref: Using Automake-Footnote-176008
+Node: Configuring76408
+Node: LT_INIT77660
+Ref: LT_INIT-Footnote-192591
+Node: Configure notes92844
+Node: Distributing96023
+Node: Invoking libtoolize96940
+Node: Autoconf and LTLIBOBJS103128
+Node: Static-only libraries103872
+Ref: Static-only libraries-Footnote-1105199
+Node: Other languages105308
+Node: C++ libraries106016
+Node: Tags107454
+Node: Versioning108868
+Node: Interfaces110236
+Node: Libtool versioning110869
+Node: Updating version info113082
+Node: Release numbers116110
+Node: Library tips117966
+Node: C header files120772
+Ref: C header files-Footnote-1124446
+Node: Inter-library dependencies124655
+Node: Dlopened modules127372
+Node: Building modules129259
+Node: Dlpreopening130460
+Node: Linking with dlopened modules136117
+Node: Finding the dlname141046
+Ref: Finding the dlname-Footnote-1142364
+Node: Dlopen issues142417
+Node: Using libltdl143472
+Node: Libltdl interface145314
+Ref: Libltdl interface-Footnote-1158964
+Node: Modules for libltdl159258
+Node: Thread Safety in libltdl161784
+Node: User defined module data162797
+Node: Module loaders for libltdl170290
+Ref: Module loaders for libltdl-Footnote-1179561
+Node: Distributing libltdl179667
+Ref: Distributing libltdl-Footnote-1193478
+Ref: Distributing libltdl-Footnote-2193774
+Node: Trace interface193924
+Node: FAQ194760
+Node: Stripped link flags195098
+Node: Troubleshooting196544
+Node: Libtool test suite197067
+Node: Test descriptions197845
+Node: When tests fail210238
+Node: Reporting bugs211242
+Node: Maintaining212860
+Node: New ports213603
+Node: Information sources214296
+Node: Porting inter-library dependencies216764
+Node: Tested platforms219490
+Node: Platform quirks227920
+Node: References229101
+Node: Compilers229951
+Ref: Compilers-Footnote-1231527
+Node: Reloadable objects231843
+Node: Multiple dependencies232202
+Node: Archivers233099
+Node: Cross compiling233689
+Node: File name conversion239701
+Node: File Name Conversion Failure242540
+Node: Native MinGW File Name Conversion243788
+Node: Cygwin/Windows File Name Conversion245351
+Node: Unix/Windows File Name Conversion246724
+Node: LT_CYGPATH247493
+Node: Cygwin to MinGW Cross250738
+Node: Windows DLLs255042
+Node: libtool script contents262320
+Node: Cheap tricks282713
+Node: GNU Free Documentation License284584
+Node: Combined Index309759
+
+End Tag Table
diff --git a/doc/libtool.info-1 b/doc/libtool.info-1
new file mode 100644
index 0000000..6d16648
--- /dev/null
+++ b/doc/libtool.info-1
@@ -0,0 +1,6698 @@
+This is doc/libtool.info, produced by makeinfo version 4.13 from
+./doc/libtool.texi.
+
+INFO-DIR-SECTION GNU programming tools
+START-INFO-DIR-ENTRY
+* Libtool: (libtool).           Generic shared library support script.
+END-INFO-DIR-ENTRY
+
+INFO-DIR-SECTION Individual utilities
+START-INFO-DIR-ENTRY
+* libtool-invocation: (libtool)Invoking libtool.
+                                                Running the `libtool' script.
+* libtoolize: (libtool)Invoking libtoolize.     Adding libtool support.
+END-INFO-DIR-ENTRY
+
+   This file documents GNU Libtool 2.4.2
+
+   Copyright (C) 1996-2011 Free Software Foundation, Inc.
+
+   Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts.  A copy of the license is included in the section entitled "GNU
+Free Documentation License".
+
+
+File: libtool.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)
+
+Shared library support for GNU
+******************************
+
+This file documents GNU Libtool, a script that allows package developers
+to provide generic shared library support.  This edition documents
+version 2.4.2.
+
+   *Note Reporting bugs::, for information on how to report problems
+with GNU Libtool.
+
+* Menu:
+
+* Introduction::                What the heck is libtool?
+* Libtool paradigm::            How libtool's view of libraries is different.
+* Using libtool::               Example of using libtool to build libraries.
+* Invoking libtool::            Running the `libtool' script.
+* Integrating libtool::         Using libtool in your own packages.
+* Other languages::             Using libtool without a C compiler.
+* Versioning::                  Using library interface versions.
+* Library tips::                Tips for library interface design.
+* Inter-library dependencies::  Libraries that depend on other libraries.
+* Dlopened modules::            `dlopen'ing libtool-created libraries.
+* Using libltdl::               Libtool's portable `dlopen' wrapper library.
+* Trace interface::             Libtool's trace interface.
+* FAQ::                         Frequently Asked Questions
+* Troubleshooting::             When libtool doesn't work as advertised.
+* Maintaining::                 Information used by the libtool maintainer.
+* GNU Free Documentation License::  License for this manual.
+* Combined Index::              Full index.
+
+ --- The Detailed Node Listing ---
+
+Introduction
+
+* Motivation::                  Why does GNU need a libtool?
+* Issues::                      The problems that need to be addressed.
+* Other implementations::       How other people have solved these issues.
+* Postmortem::                  Learning from past difficulties.
+
+Using libtool
+
+* Creating object files::       Compiling object files for libraries.
+* Linking libraries::           Creating libraries from object files.
+* Linking executables::         Linking object files against libtool libraries.
+* Debugging executables::       Running GDB on libtool-generated programs.
+* Installing libraries::        Making libraries available to users.
+* Installing executables::      Making programs available to users.
+* Static libraries::            When shared libraries are not wanted.
+
+Linking executables
+
+* Wrapper executables::         Wrapper executables for some platforms.
+
+Invoking `libtool'
+
+* Compile mode::                Creating library object files.
+* Link mode::                   Generating executables and libraries.
+* Execute mode::                Debugging libtool-generated programs.
+* Install mode::                Making libraries and executables public.
+* Finish mode::                 Completing a library installation.
+* Uninstall mode::              Removing installed executables and libraries.
+* Clean mode::                  Removing uninstalled executables and libraries.
+
+Integrating libtool with your package
+
+* Autoconf macros::             Autoconf macros exported by libtool.
+* Makefile rules::              Writing `Makefile' rules for libtool.
+* Using Automake::              Automatically supporting libtool.
+* Configuring::                 Configuring libtool for a host system.
+* Distributing::                What files to distribute with your package.
+* Static-only libraries::       Sometimes shared libraries are just a pain.
+
+Configuring libtool
+
+* LT_INIT::                     Configuring `libtool' in `configure.ac'.
+* Configure notes::             Platform-specific notes for configuration.
+
+Including libtool in your package
+
+* Invoking libtoolize::         `libtoolize' command line options.
+* Autoconf and LTLIBOBJS::      Autoconf automates LTLIBOBJS generation.
+
+Using libtool with other languages
+
+* C++ libraries::               Writing libraries for C++
+* Tags::                        Tags
+
+Library interface versions
+
+* Interfaces::                  What are library interfaces?
+* Libtool versioning::          Libtool's versioning system.
+* Updating version info::       Changing version information before releases.
+* Release numbers::             Breaking binary compatibility for aesthetics.
+
+Tips for interface design
+
+* C header files::              How to write portable include files.
+
+Dlopened modules
+
+* Building modules::            Creating dlopenable objects and libraries.
+* Dlpreopening::                Dlopening that works on static platforms.
+* Linking with dlopened modules::  Using dlopenable modules in libraries.
+* Finding the dlname::          Choosing the right file to `dlopen'.
+* Dlopen issues::               Unresolved problems that need your attention.
+
+Using libltdl
+
+* Libltdl interface::           How to use libltdl in your programs.
+* Modules for libltdl::         Creating modules that can be `dlopen'ed.
+* Thread Safety in libltdl::    Registering callbacks for multi-thread safety.
+* User defined module data::    Associating data with loaded modules.
+* Module loaders for libltdl::  Creating user defined module loaders.
+* Distributing libltdl::        How to distribute libltdl with your package.
+
+Frequently Asked Questions about libtool
+
+* Stripped link flags::         Dropped flags when creating a library
+
+Troubleshooting
+
+* Libtool test suite::          Libtool's self-tests.
+* Reporting bugs::              How to report problems with libtool.
+
+The libtool test suite
+
+* Test descriptions::           The contents of the old test suite.
+* When tests fail::             What to do when a test fails.
+
+Maintenance notes for libtool
+
+* New ports::                   How to port libtool to new systems.
+* Tested platforms::            When libtool was last tested.
+* Platform quirks::             Information about different library systems.
+* libtool script contents::     Configuration information that libtool uses.
+* Cheap tricks::                Making libtool maintainership easier.
+
+Porting libtool to new systems
+
+* Information sources::         Where to find relevant documentation
+* Porting inter-library dependencies::  Implementation details explained
+
+Platform quirks
+
+* References::                  Finding more information.
+* Compilers::                   Creating object files from source files.
+* Reloadable objects::          Binding object files together.
+* Multiple dependencies::       Removing duplicate dependent libraries.
+* Archivers::                   Programs that create static archives.
+* Cross compiling::             Issues that arise when cross compiling.
+* File name conversion::        Converting file names between platforms.
+* Windows DLLs::                Windows header defines.
+
+File name conversion
+
+* File Name Conversion Failure::  What happens when file name conversion fails
+* Native MinGW File Name Conversion::  MSYS file name conversion idiosyncrasies
+* Cygwin/Windows File Name Conversion::  Using `cygpath' to convert Cygwin file names
+* Unix/Windows File Name Conversion::  Using Wine to convert Unix paths
+* LT_CYGPATH::                  Invoking `cygpath' from other environments
+* Cygwin to MinGW Cross::       Other notes concerning MinGW cross
+
+
+File: libtool.info,  Node: Introduction,  Next: Libtool paradigm,  Prev: Top,  Up: Top
+
+1 Introduction
+**************
+
+In the past, if you were a source code package developer and wanted to
+take advantage of the power of shared libraries, you needed to write
+custom support code for each platform on which your package ran.  You
+also had to design a configuration interface so that the package
+installer could choose what sort of libraries were built.
+
+   GNU Libtool simplifies your job by encapsulating both the
+platform-specific dependencies, and the user interface, in a single
+script.  GNU Libtool is designed so that the complete functionality of
+each host type is available via a generic interface, but nasty quirks
+are hidden from the programmer.
+
+   GNU Libtool's consistent interface is reassuring... users don't need
+to read obscure documentation in order to have their favorite source
+package build shared libraries.  They just run your package `configure'
+script (or equivalent), and libtool does all the dirty work.
+
+   There are several examples throughout this document.  All assume the
+same environment: we want to build a library, `libhello', in a generic
+way.
+
+   `libhello' could be a shared library, a static library, or both...
+whatever is available on the host system, as long as libtool has been
+ported to it.
+
+   This chapter explains the original design philosophy of libtool.
+Feel free to skip to the next chapter, unless you are interested in
+history, or want to write code to extend libtool in a consistent way.
+
+* Menu:
+
+* Motivation::                  Why does GNU need a libtool?
+* Issues::                      The problems that need to be addressed.
+* Other implementations::       How other people have solved these issues.
+* Postmortem::                  Learning from past difficulties.
+
+
+File: libtool.info,  Node: Motivation,  Next: Issues,  Up: Introduction
+
+1.1 Motivation for writing libtool
+==================================
+
+Since early 1995, several different GNU developers have recognized the
+importance of having shared library support for their packages.  The
+primary motivation for such a change is to encourage modularity and
+reuse of code (both conceptually and physically) in GNU programs.
+
+   Such a demand means that the way libraries are built in GNU packages
+needs to be general, to allow for any library type the package installer
+might want.  The problem is compounded by the absence of a standard
+procedure for creating shared libraries on different platforms.
+
+   The following sections outline the major issues facing shared library
+support in GNU, and how shared library support could be standardized
+with libtool.
+
+   The following specifications were used in developing and evaluating
+this system:
+
+  1. The system must be as elegant as possible.
+
+  2. The system must be fully integrated with the GNU Autoconf and
+     Automake utilities, so that it will be easy for GNU maintainers to
+     use.  However, the system must not require these tools, so that it
+     can be used by non-GNU packages.
+
+  3. Portability to other (non-GNU) architectures and tools is
+     desirable.
+
+
+File: libtool.info,  Node: Issues,  Next: Other implementations,  Prev: Motivation,  Up: Introduction
+
+1.2 Implementation issues
+=========================
+
+The following issues need to be addressed in any reusable shared library
+system, specifically libtool:
+
+  1. The package installer should be able to control what sort of
+     libraries are built.
+
+  2. It can be tricky to run dynamically linked programs whose
+     libraries have not yet been installed.  `LD_LIBRARY_PATH' must be
+     set properly (if it is supported), or programs fail to run.
+
+  3. The system must operate consistently even on hosts that don't
+     support shared libraries.
+
+  4. The commands required to build shared libraries may differ wildly
+     from host to host.  These need to be determined at configure time
+     in a consistent way.
+
+  5. It is not always obvious with what prefix or suffix a shared
+     library should be installed.  This makes it difficult for
+     `Makefile' rules, since they generally assume that file names are
+     the same from host to host.
+
+  6. The system needs a simple library version number abstraction, so
+     that shared libraries can be upgraded in place.  The programmer
+     should be informed how to design the interfaces to the library to
+     maximize binary compatibility.
+
+  7. The install `Makefile' target should warn the package installer to
+     set the proper environment variables (`LD_LIBRARY_PATH' or
+     equivalent), or run `ldconfig'.
+
+
+File: libtool.info,  Node: Other implementations,  Next: Postmortem,  Prev: Issues,  Up: Introduction
+
+1.3 Other implementations
+=========================
+
+Even before libtool was developed, many free software packages built and
+installed their own shared libraries.  At first, these packages were
+examined to avoid reinventing existing features.
+
+   Now it is clear that none of these packages have documented the
+details of shared library systems that libtool requires.  So, other
+packages have been more or less abandoned as influences.
+
+
+File: libtool.info,  Node: Postmortem,  Prev: Other implementations,  Up: Introduction
+
+1.4 A postmortem analysis of other implementations
+==================================================
+
+In all fairness, each of the implementations that were examined do the
+job that they were intended to do, for a number of different host
+systems.  However, none of these solutions seem to function well as a
+generalized, reusable component.
+
+   Most were too complex to use (much less modify) without understanding
+exactly what the implementation does, and they were generally not
+documented.
+
+   The main difficulty is that different vendors have different views of
+what libraries are, and none of the packages that were examined seemed
+to be confident enough to settle on a single paradigm that just _works_.
+
+   Ideally, libtool would be a standard that would be implemented as
+series of extensions and modifications to existing library systems to
+make them work consistently.  However, it is not an easy task to
+convince operating system developers to mend their evil ways, and
+people want to build shared libraries right now, even on buggy, broken,
+confused operating systems.
+
+   For this reason, libtool was designed as an independent shell script.
+It isolates the problems and inconsistencies in library building that
+plague `Makefile' writers by wrapping the compiler suite on different
+platforms with a consistent, powerful interface.
+
+   With luck, libtool will be useful to and used by the GNU community,
+and that the lessons that were learned in writing it will be taken up by
+designers of future library systems.
+
+
+File: libtool.info,  Node: Libtool paradigm,  Next: Using libtool,  Prev: Introduction,  Up: Top
+
+2 The libtool paradigm
+**********************
+
+At first, libtool was designed to support an arbitrary number of library
+object types.  After libtool was ported to more platforms, a new
+paradigm gradually developed for describing the relationship between
+libraries and programs.
+
+   In summary, "libraries are programs with multiple entry points, and
+more formally defined interfaces."
+
+   Version 0.7 of libtool was a complete redesign and rewrite of
+libtool to reflect this new paradigm.  So far, it has proved to be
+successful: libtool is simpler and more useful than before.
+
+   The best way to introduce the libtool paradigm is to contrast it with
+the paradigm of existing library systems, with examples from each.  It
+is a new way of thinking, so it may take a little time to absorb, but
+when you understand it, the world becomes simpler.
+
+
+File: libtool.info,  Node: Using libtool,  Next: Invoking libtool,  Prev: Libtool paradigm,  Up: Top
+
+3 Using libtool
+***************
+
+It makes little sense to talk about using libtool in your own packages
+until you have seen how it makes your life simpler.  The examples in
+this chapter introduce the main features of libtool by comparing the
+standard library building procedure to libtool's operation on two
+different platforms:
+
+`a23'
+     An Ultrix 4.2 platform with only static libraries.
+
+`burger'
+     A NetBSD/i386 1.2 platform with shared libraries.
+
+   You can follow these examples on your own platform, using the
+preconfigured libtool script that was installed with libtool (*note
+Configuring::).
+
+   Source files for the following examples are taken from the `demo'
+subdirectory of the libtool distribution.  Assume that we are building a
+library, `libhello', out of the files `foo.c' and `hello.c'.
+
+   Note that the `foo.c' source file uses the `cos' math library
+function, which is usually found in the standalone math library, and not
+the C library (*note Trigonometric Functions: (libc)Trig Functions.).
+So, we need to add `-lm' to the end of the link line whenever we link
+`foo.lo' into an executable or a library (*note Inter-library
+dependencies::).
+
+   The same rule applies whenever you use functions that don't appear in
+the standard C library... you need to add the appropriate `-lNAME' flag
+to the end of the link line when you link against those objects.
+
+   After we have built that library, we want to create a program by
+linking `main.o' against `libhello'.
+
+* Menu:
+
+* Creating object files::       Compiling object files for libraries.
+* Linking libraries::           Creating libraries from object files.
+* Linking executables::         Linking object files against libtool libraries.
+* Debugging executables::       Running GDB on libtool-generated programs.
+* Installing libraries::        Making libraries available to users.
+* Installing executables::      Making programs available to users.
+* Static libraries::            When shared libraries are not wanted.
+
+
+File: libtool.info,  Node: Creating object files,  Next: Linking libraries,  Up: Using libtool
+
+3.1 Creating object files
+=========================
+
+To create an object file from a source file, the compiler is invoked
+with the `-c' flag (and any other desired flags):
+
+     burger$ gcc -g -O -c main.c
+     burger$
+
+   The above compiler command produces an object file, usually named
+`main.o', from the source file `main.c'.
+
+   For most library systems, creating object files that become part of a
+static library is as simple as creating object files that are linked to
+form an executable:
+
+     burger$ gcc -g -O -c foo.c
+     burger$ gcc -g -O -c hello.c
+     burger$
+
+   Shared libraries, however, may only be built from
+"position-independent code" (PIC).  So, special flags must be passed to
+the compiler to tell it to generate PIC rather than the standard
+position-dependent code.
+
+   Since this is a library implementation detail, libtool hides the
+complexity of PIC compiler flags and uses separate library object files
+(the PIC one lives in the `.libs' subdirectory and the static one lives
+in the current directory).  On systems without shared libraries, the
+PIC library object files are not created, whereas on systems where all
+code is PIC, such as AIX, the static ones are not created.
+
+   To create library object files for `foo.c' and `hello.c', simply
+invoke libtool with the standard compilation command as arguments
+(*note Compile mode::):
+
+     a23$ libtool --mode=compile gcc -g -O -c foo.c
+     gcc -g -O -c foo.c -o foo.o
+     a23$ libtool --mode=compile gcc -g -O -c hello.c
+     gcc -g -O -c hello.c -o hello.o
+     a23$
+
+   Note that libtool silently creates an additional control file on each
+`compile' invocation.  The `.lo' file is the libtool object, which
+Libtool uses to determine what object file may be built into a shared
+library.  On `a23', only static libraries are supported so the library
+objects look like this:
+
+     # foo.lo - a libtool object file
+     # Generated by ltmain.sh (GNU libtool) 2.4.2
+     #
+     # Please DO NOT delete this file!
+     # It is necessary for linking the library.
+
+     # Name of the PIC object.
+     pic_object=none
+
+     # Name of the non-PIC object.
+     non_pic_object='foo.o'
+
+   On shared library systems, libtool automatically generates an
+additional PIC object by inserting the appropriate PIC generation flags
+into the compilation command:
+
+     burger$ libtool --mode=compile gcc -g -O -c foo.c
+     mkdir .libs
+     gcc -g -O -c foo.c  -fPIC -DPIC -o .libs/foo.o
+     gcc -g -O -c foo.c -o foo.o >/dev/null 2>&1
+     burger$
+
+   Note that Libtool automatically created `.libs' directory upon its
+first execution, where PIC library object files will be stored.
+
+   Since `burger' supports shared libraries, and requires PIC objects
+to build them, Libtool has compiled a PIC object this time, and made a
+note of it in the libtool object:
+
+     # foo.lo - a libtool object file
+     # Generated by ltmain.sh (GNU libtool) 2.4.2
+     #
+     # Please DO NOT delete this file!
+     # It is necessary for linking the library.
+
+     # Name of the PIC object.
+     pic_object='.libs/foo.o'
+
+     # Name of the non-PIC object.
+     non_pic_object='foo.o'
+
+   Notice that the second run of GCC has its output discarded.  This is
+done so that compiler warnings aren't annoyingly duplicated.  If you
+need to see both sets of warnings (you might have conditional code
+inside `#ifdef PIC' for example), you can turn off suppression with the
+`-no-suppress' option to libtool's compile mode:
+
+     burger$ libtool --mode=compile gcc -no-suppress -g -O -c hello.c
+     gcc -g -O -c hello.c  -fPIC -DPIC -o .libs/hello.o
+     gcc -g -O -c hello.c -o hello.o
+     burger$
+
+
+File: libtool.info,  Node: Linking libraries,  Next: Linking executables,  Prev: Creating object files,  Up: Using libtool
+
+3.2 Linking libraries
+=====================
+
+Without libtool, the programmer would invoke the `ar' command to create
+a static library:
+
+     burger$ ar cru libhello.a hello.o foo.o
+     burger$
+
+   But of course, that would be too simple, so many systems require that
+you run the `ranlib' command on the resulting library (to give it
+better karma, or something):
+
+     burger$ ranlib libhello.a
+     burger$
+
+   It seems more natural to use the C compiler for this task, given
+libtool's "libraries are programs" approach.  So, on platforms without
+shared libraries, libtool simply acts as a wrapper for the system `ar'
+(and possibly `ranlib') commands.
+
+   Again, the libtool control file name (`.la' suffix) differs from the
+standard library name (`.a' suffix).  The arguments to libtool are the
+same ones you would use to produce an executable named `libhello.la'
+with your compiler (*note Link mode::):
+
+     a23$ libtool --mode=link gcc -g -O -o libhello.la foo.o hello.o
+     *** Warning: Linking the shared library libhello.la against the
+     *** non-libtool objects foo.o hello.o is not portable!
+     ar cru .libs/libhello.a
+     ranlib .libs/libhello.a
+     creating libhello.la
+     (cd .libs && rm -f libhello.la && ln -s ../libhello.la libhello.la)
+     a23$
+
+   Aha!  Libtool caught a common error... trying to build a library
+from standard objects instead of special `.lo' object files.  This
+doesn't matter so much for static libraries, but on shared library
+systems, it is of great importance.  (Note that you may replace
+`libhello.la' with `libhello.a' in which case libtool won't issue the
+warning any more.  But although this method works, this is not intended
+to be used because it makes you lose the benefits of using Libtool.)
+
+   So, let's try again, this time with the library object files.
+Remember also that we need to add `-lm' to the link command line because
+`foo.c' uses the `cos' math library function (*note Using libtool::).
+
+   Another complication in building shared libraries is that we need to
+specify the path to the directory in which they (eventually) will be
+installed (in this case, `/usr/local/lib')(1):
+
+     a23$ libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
+                     -rpath /usr/local/lib -lm
+     ar cru .libs/libhello.a foo.o hello.o
+     ranlib .libs/libhello.a
+     creating libhello.la
+     (cd .libs && rm -f libhello.la && ln -s ../libhello.la libhello.la)
+     a23$
+
+   Now, let's try the same trick on the shared library platform:
+
+     burger$ libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
+                     -rpath /usr/local/lib -lm
+     rm -fr  .libs/libhello.a .libs/libhello.la
+     ld -Bshareable -o .libs/libhello.so.0.0 .libs/foo.o .libs/hello.o -lm
+     ar cru .libs/libhello.a foo.o hello.o
+     ranlib .libs/libhello.a
+     creating libhello.la
+     (cd .libs && rm -f libhello.la && ln -s ../libhello.la libhello.la)
+     burger$
+
+   Now that's significantly cooler... Libtool just ran an obscure `ld'
+command to create a shared library, as well as the static library.
+
+   Note how libtool creates extra files in the `.libs' subdirectory,
+rather than the current directory.  This feature is to make it easier
+to clean up the build directory, and to help ensure that other programs
+fail horribly if you accidentally forget to use libtool when you should.
+
+   Again, you may want to have a look at the `.la' file in order to see
+what Libtool stores in it.  In particular, you will see that Libtool
+uses this file to remember the destination directory for the library
+(the argument to `-rpath') as well as the dependency on the math
+library (`-lm').
+
+   ---------- Footnotes ----------
+
+   (1) If you don't specify an `rpath', then libtool builds a libtool
+convenience archive, not a shared library (*note Static libraries::).
+
+
+File: libtool.info,  Node: Linking executables,  Next: Debugging executables,  Prev: Linking libraries,  Up: Using libtool
+
+3.3 Linking executables
+=======================
+
+If you choose at this point to "install" the library (put it in a
+permanent location) before linking executables against it, then you
+don't need to use libtool to do the linking.  Simply use the appropriate
+`-L' and `-l' flags to specify the library's location.
+
+   Some system linkers insist on encoding the full directory name of
+each shared library in the resulting executable.  Libtool has to work
+around this misfeature by special magic to ensure that only permanent
+directory names are put into installed executables.
+
+   The importance of this bug must not be overlooked: it won't cause
+programs to crash in obvious ways.  It creates a security hole, and
+possibly even worse, if you are modifying the library source code after
+you have installed the package, you will change the behaviour of the
+installed programs!
+
+   So, if you want to link programs against the library before you
+install it, you must use libtool to do the linking.
+
+   Here's the old way of linking against an uninstalled library:
+
+     burger$ gcc -g -O -o hell.old main.o libhello.a -lm
+     burger$
+
+   Libtool's way is almost the same(1) (*note Link mode::):
+
+     a23$ libtool --mode=link gcc -g -O -o hell main.o libhello.la
+     gcc -g -O -o hell main.o  ./.libs/libhello.a -lm
+     a23$
+
+   That looks too simple to be true.  All libtool did was transform
+`libhello.la' to `./.libs/libhello.a', but remember that `a23' has no
+shared libraries.  Notice that Libtool also remembered that
+`libhello.la' depends on `-lm', so even though we didn't specify `-lm'
+on the libtool command line(2) Libtool has added it to the `gcc' link
+line for us.
+
+   On `burger' Libtool links against the uninstalled shared library:
+
+     burger$ libtool --mode=link gcc -g -O -o hell main.o libhello.la
+     gcc -g -O -o .libs/hell main.o -L./.libs -R/usr/local/lib -lhello -lm
+     creating hell
+     burger$
+
+   Now assume `libhello.la' had already been installed, and you want to
+link a new program with it.  You could figure out where it lives by
+yourself, then run:
+
+     burger$ gcc -g -O -o test test.o -L/usr/local/lib -lhello -lm
+
+   However, unless `/usr/local/lib' is in the standard library search
+path, you won't be able to run `test'.  However, if you use libtool to
+link the already-installed libtool library, it will do The Right Thing
+(TM) for you:
+
+     burger$ libtool --mode=link gcc -g -O -o test test.o \
+                     /usr/local/lib/libhello.la
+     gcc -g -O -o .libs/test test.o -Wl,--rpath \
+             -Wl,/usr/local/lib /usr/local/lib/libhello.a -lm
+     creating test
+     burger$
+
+   Note that libtool added the necessary run-time path flag, as well as
+`-lm', the library libhello.la depended upon.  Nice, huh?
+
+   Notice that the executable, `hell', was actually created in the
+`.libs' subdirectory.  Then, a wrapper script (or, on certain
+platforms, a wrapper executable *note Wrapper executables::) was
+created in the current directory.
+
+   Since libtool created a wrapper script, you should use libtool to
+install it and debug it too.  However, since the program does not depend
+on any uninstalled libtool library, it is probably usable even without
+the wrapper script.
+
+   On NetBSD 1.2, libtool encodes the installation directory of
+`libhello', by using the `-R/usr/local/lib' compiler flag.  Then, the
+wrapper script guarantees that the executable finds the correct shared
+library (the one in `./.libs') until it is properly installed.
+
+   Let's compare the two different programs:
+
+     burger$ time ./hell.old
+     Welcome to GNU Hell!
+     ** This is not GNU Hello.  There is no built-in mail reader. **
+             0.21 real         0.02 user         0.08 sys
+     burger$ time ./hell
+     Welcome to GNU Hell!
+     ** This is not GNU Hello.  There is no built-in mail reader. **
+             0.63 real         0.09 user         0.59 sys
+     burger$
+
+   The wrapper script takes significantly longer to execute, but at
+least the results are correct, even though the shared library hasn't
+been installed yet.
+
+   So, what about all the space savings that shared libraries are
+supposed to yield?
+
+     burger$ ls -l hell.old libhello.a
+     -rwxr-xr-x  1 gord  gord  15481 Nov 14 12:11 hell.old
+     -rw-r--r--  1 gord  gord   4274 Nov 13 18:02 libhello.a
+     burger$ ls -l .libs/hell .libs/libhello.*
+     -rwxr-xr-x  1 gord  gord  11647 Nov 14 12:10 .libs/hell
+     -rw-r--r--  1 gord  gord   4274 Nov 13 18:44 .libs/libhello.a
+     -rwxr-xr-x  1 gord  gord  12205 Nov 13 18:44 .libs/libhello.so.0.0
+     burger$
+
+   Well, that sucks.  Maybe I should just scrap this project and take up
+basket weaving.
+
+   Actually, it just proves an important point: shared libraries incur
+overhead because of their (relative) complexity.  In this situation, the
+price of being dynamic is eight kilobytes, and the payoff is about four
+kilobytes.  So, having a shared `libhello' won't be an advantage until
+we link it against at least a few more programs.
+
+* Menu:
+
+* Wrapper executables::         Wrapper executables for some platforms.
+
+   ---------- Footnotes ----------
+
+   (1) However, you should avoid using `-L' or `-l' flags to link
+against an uninstalled libtool library.  Just specify the relative path
+to the `.la' file, such as `../intl/libintl.la'.  This is a design
+decision to eliminate any ambiguity when linking against uninstalled
+shared libraries.
+
+   (2) And why should we? `main.o' doesn't directly depend on `-lm'
+after all.
+
+
+File: libtool.info,  Node: Wrapper executables,  Up: Linking executables
+
+3.3.1 Wrapper executables for uninstalled programs
+--------------------------------------------------
+
+Some platforms, notably those hosted on Windows such as Cygwin and
+MinGW, use a wrapper executable rather than a wrapper script to ensure
+proper operation of uninstalled programs linked by libtool against
+uninstalled shared libraries. The wrapper executable thus performs the
+same function as the wrapper script used on other platforms, but allows
+to satisfy the `make' rules for the program, whose name ends in
+`$(EXEEXT)'. The actual program executable is created below .libs, and
+its name will end in `$(EXEEXT)' and may or may not contain an `lt-'
+prefix.  This wrapper executable sets various environment values so
+that the program executable may locate its (uninstalled) shared
+libraries, and then launches the program executable.
+
+   The wrapper executable provides a debug mode, enabled by passing the
+command-line option `--lt-debug' (see below). When executing in debug
+mode, diagnostic information will be printed to `stderr' before the
+program executable is launched.
+
+   Finally, the wrapper executable supports a number of command line
+options that may be useful when debugging the operation of the wrapper
+system. All of these options begin with `--lt-', and if present they
+and their arguments will be removed from the argument list passed on to
+the program executable.  Therefore, the program executable may not
+employ command line options that begin with `--lt-'. (In fact, the
+wrapper executable will detect any command line options that begin with
+`--lt-' and abort with an error message if the option is not
+recognized). If this presents a problem, please contact the Libtool
+team at the Libtool bug reporting address <bug-libtool@gnu.org>.
+
+   These command line options include:
+
+`--lt-dump-script'
+     Causes the wrapper to print a copy of the wrapper _script_ to
+     `stdout', and exit.
+
+`--lt-debug'
+     Causes the wrapper to print diagnostic information to `stdout',
+     before launching the program executable.
+
+
+   For consistency, both the wrapper _script_ and the wrapper
+_executable_ support these options.
+
+
+File: libtool.info,  Node: Debugging executables,  Next: Installing libraries,  Prev: Linking executables,  Up: Using libtool
+
+3.4 Debugging executables
+=========================
+
+If `hell' was a complicated program, you would certainly want to test
+and debug it before installing it on your system.  In the above
+section, you saw how the libtool wrapper script makes it possible to run
+the program directly, but unfortunately, this mechanism interferes with
+the debugger:
+
+     burger$ gdb hell
+     GDB is free software and you are welcome to distribute copies of it
+      under certain conditions; type "show copying" to see the conditions.
+     There is no warranty for GDB; type "show warranty" for details.
+     GDB 4.16 (i386-unknown-netbsd), (C) 1996 Free Software Foundation, Inc.
+
+     "hell": not in executable format: File format not recognized
+
+     (gdb) quit
+     burger$
+
+   Sad.  It doesn't work because GDB doesn't know where the executable
+lives.  So, let's try again, by invoking GDB directly on the executable:
+
+     burger$ gdb .libs/hell
+     GNU gdb 5.3 (i386-unknown-netbsd)
+     Copyright 2002 Free Software Foundation, Inc.
+     GDB is free software, covered by the GNU General Public License,
+     and you are welcome to change it and/or distribute copies of it
+     under certain conditions.  Type "show copying" to see the conditions.
+     There is no warranty for GDB.  Type "show warranty" for details.
+     (gdb) break main
+     Breakpoint 1 at 0x8048547: file main.c, line 29.
+     (gdb) run
+     Starting program: /home/src/libtool/demo/.libs/hell
+     /home/src/libtool/demo/.libs/hell: can't load library 'libhello.so.0'
+
+     Program exited with code 020.
+     (gdb) quit
+     burger$
+
+   Argh.  Now GDB complains because it cannot find the shared library
+that `hell' is linked against.  So, we must use libtool in order to
+properly set the library path and run the debugger.  Fortunately, we can
+forget all about the `.libs' directory, and just run it on the
+executable wrapper (*note Execute mode::):
+
+     burger$ libtool --mode=execute gdb hell
+     GNU gdb 5.3 (i386-unknown-netbsd)
+     Copyright 2002 Free Software Foundation, Inc.
+     GDB is free software, covered by the GNU General Public License,
+     and you are welcome to change it and/or distribute copies of it
+     under certain conditions.  Type "show copying" to see the conditions.
+     There is no warranty for GDB.  Type "show warranty" for details.
+     (gdb) break main
+     Breakpoint 1 at 0x8048547: file main.c, line 29.
+     (gdb) run
+     Starting program: /home/src/libtool/demo/.libs/hell
+
+     Breakpoint 1, main (argc=1, argv=0xbffffc40) at main.c:29
+     29        printf ("Welcome to GNU Hell!\n");
+     (gdb) quit
+     The program is running.  Quit anyway (and kill it)? (y or n) y
+     burger$
+
+
+File: libtool.info,  Node: Installing libraries,  Next: Installing executables,  Prev: Debugging executables,  Up: Using libtool
+
+3.5 Installing libraries
+========================
+
+Installing libraries on a non-libtool system is quite
+straightforward... just copy them into place:(1)
+
+     burger$ su
+     Password: ********
+     burger# cp libhello.a /usr/local/lib/libhello.a
+     burger#
+
+   Oops, don't forget the `ranlib' command:
+
+     burger# ranlib /usr/local/lib/libhello.a
+     burger#
+
+   Libtool installation is quite simple, as well.  Just use the
+`install' or `cp' command that you normally would (*note Install
+mode::):
+
+     a23# libtool --mode=install cp libhello.la /usr/local/lib/libhello.la
+     cp libhello.la /usr/local/lib/libhello.la
+     cp .libs/libhello.a /usr/local/lib/libhello.a
+     ranlib /usr/local/lib/libhello.a
+     a23#
+
+   Note that the libtool library `libhello.la' is also installed, to
+help libtool with uninstallation (*note Uninstall mode::) and linking
+(*note Linking executables::) and to help programs with dlopening
+(*note Dlopened modules::).
+
+   Here is the shared library example:
+
+     burger# libtool --mode=install install -c libhello.la \
+                     /usr/local/lib/libhello.la
+     install -c .libs/libhello.so.0.0 /usr/local/lib/libhello.so.0.0
+     install -c libhello.la /usr/local/lib/libhello.la
+     install -c .libs/libhello.a /usr/local/lib/libhello.a
+     ranlib /usr/local/lib/libhello.a
+     burger#
+
+   It is safe to specify the `-s' (strip symbols) flag if you use a
+BSD-compatible install program when installing libraries.  Libtool will
+either ignore the `-s' flag, or will run a program that will strip only
+debugging and compiler symbols from the library.
+
+   Once the libraries have been put in place, there may be some
+additional configuration that you need to do before using them.  First,
+you must make sure that where the library is installed actually agrees
+with the `-rpath' flag you used to build it.
+
+   Then, running `libtool -n finish LIBDIR' can give you further hints
+on what to do (*note Finish mode::):
+
+     burger# libtool -n finish /usr/local/lib
+     PATH="$PATH:/sbin" ldconfig -m /usr/local/lib
+     -----------------------------------------------------------------
+     Libraries have been installed in:
+        /usr/local/lib
+
+     To link against installed libraries in a given directory, LIBDIR,
+     you must use the `-LLIBDIR' flag during linking.
+
+      You will also need to do one of the following:
+        - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
+          during execution
+        - add LIBDIR to the `LD_RUN_PATH' environment variable
+          during linking
+        - use the `-RLIBDIR' linker flag
+
+     See any operating system documentation about shared libraries for
+     more information, such as the ld and ld.so manual pages.
+     -----------------------------------------------------------------
+     burger#
+
+   After you have completed these steps, you can go on to begin using
+the installed libraries.  You may also install any executables that
+depend on libraries you created.
+
+   ---------- Footnotes ----------
+
+   (1) Don't strip static libraries though, or they will be unusable.
+
+
+File: libtool.info,  Node: Installing executables,  Next: Static libraries,  Prev: Installing libraries,  Up: Using libtool
+
+3.6 Installing executables
+==========================
+
+If you used libtool to link any executables against uninstalled libtool
+libraries (*note Linking executables::), you need to use libtool to
+install the executables after the libraries have been installed (*note
+Installing libraries::).
+
+   So, for our Ultrix example, we would run:
+
+     a23# libtool --mode=install -c hell /usr/local/bin/hell
+     install -c hell /usr/local/bin/hell
+     a23#
+
+   On shared library systems that require wrapper scripts, libtool just
+ignores the wrapper script and installs the correct binary:
+
+     burger# libtool --mode=install -c hell /usr/local/bin/hell
+     install -c .libs/hell /usr/local/bin/hell
+     burger#
+
+
+File: libtool.info,  Node: Static libraries,  Prev: Installing executables,  Up: Using libtool
+
+3.7 Linking static libraries
+============================
+
+Why return to `ar' and `ranlib' silliness when you've had a taste of
+libtool?  Well, sometimes it is desirable to create a static archive
+that can never be shared.  The most frequent case is when you have a
+set of object files that you use to build several different libraries.
+You can create a "convenience library" out of those objects, and link
+against that with the other libraries, instead of listing all the
+object files every time.
+
+   If you just want to link this convenience library into programs, then
+you could just ignore libtool entirely, and use the old `ar' and
+`ranlib' commands (or the corresponding GNU Automake `_LIBRARIES'
+rules).  You can even install a convenience library using GNU Libtool,
+though you probably don't want to and hence GNU Automake doesn't allow
+you to do so.
+
+     burger$ libtool --mode=install ./install-sh -c libhello.a \
+                     /local/lib/libhello.a
+     ./install-sh -c libhello.a /local/lib/libhello.a
+     ranlib /local/lib/libhello.a
+     burger$
+
+   Using libtool for static library installation protects your library
+from being accidentally stripped (if the installer used the `-s' flag),
+as well as automatically running the correct `ranlib' command.
+
+   But libtool libraries are more than just collections of object files:
+they can also carry library dependency information, which old archives
+do not.  If you want to create a libtool static convenience library, you
+can omit the `-rpath' flag and use `-static' to indicate that you're
+only interested in a static library.  When you link a program with such
+a library, libtool will actually link all object files and dependency
+libraries into the program.
+
+   If you omit both `-rpath' and `-static', libtool will create a
+convenience library that can be used to create other libtool libraries,
+even shared ones.  Just like in the static case, the library behaves as
+an alias to a set of object files and dependency libraries, but in this
+case the object files are suitable for inclusion in shared libraries.
+But be careful not to link a single convenience library, directly or
+indirectly, into a single program or library, otherwise you may get
+errors about symbol redefinitions.
+
+   The key is remembering that a convenience library contains PIC
+objects, and can be linked where a list of PIC objects makes sense;
+i.e. into a shared library.  A static convenience library contains
+non-PIC objects, so can be linked into an old static library, or a
+program.
+
+   When GNU Automake is used, you should use `noinst_LTLIBRARIES'
+instead of `lib_LTLIBRARIES' for convenience libraries, so that the
+`-rpath' option is not passed when they are linked.
+
+   As a rule of thumb, link a libtool convenience library into at most
+one libtool library, and never into a program, and link libtool static
+convenience libraries only into programs, and only if you need to carry
+library dependency information to the user of the static convenience
+library.
+
+   Another common situation where static linking is desirable is in
+creating a standalone binary.  Use libtool to do the linking and add the
+`-all-static' flag.
+
+
+File: libtool.info,  Node: Invoking libtool,  Next: Integrating libtool,  Prev: Using libtool,  Up: Top
+
+4 Invoking `libtool'
+********************
+
+The `libtool' program has the following synopsis:
+
+     libtool [OPTION]... [MODE-ARG]...
+
+and accepts the following options:
+
+`--config'
+     Display libtool configuration variables and exit.
+
+`--debug'
+     Dump a trace of shell script execution to standard output.  This
+     produces a lot of output, so you may wish to pipe it to `less' (or
+     `more') or redirect to a file.
+
+`-n'
+`--dry-run'
+     Don't create, modify, or delete any files, just show what commands
+     would be executed by libtool.
+
+`--features'
+     Display basic configuration options.  This provides a way for
+     packages to determine whether shared or static libraries will be
+     built.
+
+`--finish'
+     Same as `--mode=finish'.
+
+`-h'
+     Display short help message.
+
+`--help'
+     Display a help message and exit.  If `--mode=MODE' is specified,
+     then detailed help for MODE is displayed.
+
+`--help-all'
+     Display help for the general options as well as detailed help for
+     each operation mode, and exit.
+
+`--mode=MODE'
+     Use MODE as the operation mode.  When using libtool from the
+     command line, you can give just MODE (or a unique abbreviation of
+     it) as the first argument as a shorthand for the full
+     `--mode=MODE'.  For example, the following are equivalent:
+
+          $ libtool --mode=execute --dry-run gdb prog.exe
+          $ libtool        execute --dry-run gdb prog.exe
+          $ libtool        exe     --dry-run gdb prog.exe
+          $ libtool        e       --dry-run gdb prog.exe
+
+     MODE must be set to one of the following:
+
+    `compile'
+          Compile a source file into a libtool object.
+
+    `execute'
+          Automatically set the library path so that another program
+          can use uninstalled libtool-generated programs or libraries.
+
+    `link'
+          Create a library or an executable.
+
+    `install'
+          Install libraries or executables.
+
+    `finish'
+          Complete the installation of libtool libraries on the system.
+
+    `uninstall'
+          Delete installed libraries or executables.
+
+    `clean'
+          Delete uninstalled libraries or executables.
+
+`--tag=TAG'
+     Use configuration variables from tag TAG (*note Tags::).
+
+`--preserve-dup-deps'
+     Do not remove duplicate dependencies in libraries.  When building
+     packages with static libraries, the libraries may depend
+     circularly on each other (shared libs can too, but for those it
+     doesn't matter), so there are situations, where -la -lb -la is
+     required, and the second -la may not be stripped or the link will
+     fail.  In cases where these duplications are required, this option
+     will preserve them, only stripping the libraries that libtool
+     knows it can safely.
+
+`--quiet'
+`--silent'
+     Do not print out any progress or informational messages.
+
+`-v'
+`--verbose'
+     Print out progress and informational messages (enabled by default),
+     as well as additional messages not ordinary seen by default.
+
+`--no-quiet'
+`--no-silent'
+     Print out the progress and informational messages that are seen by
+     default. This option has no effect on whether the additional
+     messages seen in `--verbose' mode are shown.
+
+`--no-verbose'
+     Do not print out any additional informational messages beyond
+     those ordinarily seen by default. This option has no effect on
+     whether the ordinary progress and informational messages enabled
+     by `--no-quiet' are shown.
+
+     Thus, there are now three different message levels (not counting
+     `--debug'), depending on whether the normal messages and/or the
+     additional verbose messages are displayed.  Note that there is no
+     mechanism to diplay verbose messages, without also displaying
+     normal messages.
+
+    *default*
+          Normal messages are displayed, verbose messages are not
+          displayed.  In addition to being the default mode, it can be
+          forcibly achieved by using both option `--no-verbose' and
+          either option `--no-silent' or option `--no-quiet'.
+
+    *silent*
+          Neither normal messages nor verbose messages are displayed.
+          This mode can be achieved using either option `--silent' or
+          option `--quiet'.
+
+    *verbose*
+          Both normal messages and verbose messages are displayed. This
+          mode can be achieved using either option `-v' or option
+          `--verbose'.
+
+`--version'
+     Print libtool version information and exit.
+
+   The current `libtool' implementation is done with a shell script
+that needs to be invoked by the shell which `configure' chose for
+configuring `libtool' (*note The Autoconf Manual:
+(autoconf)config.status Invocation.).  This shell is set in the
+she-bang (`#!') line of the `libtool' script.  Using a different shell
+may cause undefined behavior.
+
+   The MODE-ARGS are a variable number of arguments, depending on the
+selected operation mode.  In general, each MODE-ARG is interpreted by
+programs libtool invokes, rather than libtool itself.
+
+* Menu:
+
+* Compile mode::                Creating library object files.
+* Link mode::                   Generating executables and libraries.
+* Execute mode::                Debugging libtool-generated programs.
+* Install mode::                Making libraries and executables public.
+* Finish mode::                 Completing a library installation.
+* Uninstall mode::              Removing installed executables and libraries.
+* Clean mode::                  Removing uninstalled executables and libraries.
+
+
+File: libtool.info,  Node: Compile mode,  Next: Link mode,  Up: Invoking libtool
+
+4.1 Compile mode
+================
+
+For "compile" mode, MODE-ARGS is a compiler command to be used in
+creating a "standard" object file.  These arguments should begin with
+the name of the C compiler, and contain the `-c' compiler flag so that
+only an object file is created.
+
+   Libtool determines the name of the output file by removing the
+directory component from the source file name, then substituting the
+source code suffix (e.g. `.c' for C source code) with the library
+object suffix, `.lo'.
+
+   If shared libraries are being built, any necessary PIC generation
+flags are substituted into the compilation command.
+
+   The following components of MODE-ARGS are treated specially:
+
+`-o'
+     Note that the `-o' option is now fully supported.  It is emulated
+     on the platforms that don't support it (by locking and moving the
+     objects), so it is really easy to use libtool, just with minor
+     modifications to your Makefiles.  Typing for example
+          libtool --mode=compile gcc -c foo/x.c -o foo/x.lo
+     will do what you expect.
+
+     Note, however, that, if the compiler does not support `-c' and
+     `-o', it is impossible to compile `foo/x.c' without overwriting an
+     existing `./x.o'.  Therefore, if you do have a source file
+     `./x.c', make sure you introduce dependencies in your `Makefile'
+     to make sure `./x.o' (or `./x.lo') is re-created after any
+     sub-directory's `x.lo':
+
+          x.o x.lo: foo/x.lo bar/x.lo
+
+     This will also ensure that make won't try to use a temporarily
+     corrupted `x.o' to create a program or library.  It may cause
+     needless recompilation on platforms that support `-c' and `-o'
+     together, but it's the only way to make it safe for those that
+     don't.
+
+`-no-suppress'
+     If both PIC and non-PIC objects are being built, libtool will
+     normally suppress the compiler output for the PIC object
+     compilation to save showing very similar, if not identical
+     duplicate output for each object.  If the `-no-suppress' option is
+     given in compile mode, libtool will show the compiler output for
+     both objects.
+
+`-prefer-pic'
+     Libtool will try to build only PIC objects.
+
+`-prefer-non-pic'
+     Libtool will try to build only non-PIC objects.
+
+`-shared'
+     Even if Libtool was configured with `--enable-static', the object
+     file Libtool builds will not be suitable for static linking.
+     Libtool will signal an error if it was configured with
+     `--disable-shared', or if the host does not support shared
+     libraries.
+
+`-static'
+     Even if libtool was configured with `--disable-static', the object
+     file Libtool builds *will* be suitable for static linking.
+
+`-Wc,FLAG'
+`-Xcompiler FLAG'
+     Pass a flag directly to the compiler.  With `-Wc,', multiple flags
+     may be separated by commas, whereas `-Xcompiler ' passes through
+     commas unchanged.
+
+
+File: libtool.info,  Node: Link mode,  Next: Execute mode,  Prev: Compile mode,  Up: Invoking libtool
+
+4.2 Link mode
+=============
+
+"Link" mode links together object files (including library objects) to
+form another library or to create an executable program.
+
+   MODE-ARGS consist of a command using the C compiler to create an
+output file (with the `-o' flag) from several object files.
+
+   The following components of MODE-ARGS are treated specially:
+
+`-all-static'
+     If OUTPUT-FILE is a program, then do not link it against any
+     shared libraries at all.  If OUTPUT-FILE is a library, then only
+     create a static library.  In general, this flag cannot be used
+     together with `disable-static' (*note LT_INIT::).
+
+`-avoid-version'
+     Tries to avoid versioning (*note Versioning::) for libraries and
+     modules, i.e. no version information is stored and no symbolic
+     links are created.  If the platform requires versioning, this
+     option has no effect.
+
+`-bindir'
+     Pass the absolute name of the directory for installing executable
+     programs (*note Directory Variables: (standards)Directory
+     Variables.).  `libtool' may use this value to install shared
+     libraries there on systems that do not provide for any library
+     hardcoding and use the directory of a program and the `PATH'
+     variable as library search path.  This is typically used for DLLs
+     on Windows or other systems using the PE (Portable Executable)
+     format.  On other systems, `-bindir' is ignored.  The default
+     value used is `LIBDIR/../bin' for libraries installed to `LIBDIR'.
+     You should not use `-bindir' for modules.
+
+`-dlopen FILE'
+     Same as `-dlpreopen FILE', if native dlopening is not supported on
+     the host platform (*note Dlopened modules::) or if the program is
+     linked with `-static', `-static-libtool-libs', or `-all-static'.
+     Otherwise, no effect.  If FILE is `self' Libtool will make sure
+     that the program can `dlopen' itself, either by enabling
+     `-export-dynamic' or by falling back to `-dlpreopen self'.
+
+`-dlpreopen FILE'
+     Link FILE into the output program, and add its symbols to the list
+     of preloaded symbols (*note Dlpreopening::).  If FILE is `self',
+     the symbols of the program itself will be added to preloaded
+     symbol lists.  If FILE is `force' Libtool will make sure that a
+     preloaded symbol list is always _defined_, regardless of whether
+     it's empty or not.
+
+`-export-dynamic'
+     Allow symbols from OUTPUT-FILE to be resolved with `dlsym' (*note
+     Dlopened modules::).
+
+`-export-symbols SYMFILE'
+     Tells the linker to export only the symbols listed in SYMFILE.
+     The symbol file should end in `.sym' and must contain the name of
+     one symbol per line.  This option has no effect on some platforms.
+     By default all symbols are exported.
+
+`-export-symbols-regex REGEX'
+     Same as `-export-symbols', except that only symbols matching the
+     regular expression REGEX are exported.  By default all symbols are
+     exported.
+
+`-LLIBDIR'
+     Search LIBDIR for required libraries that have already been
+     installed.
+
+`-lNAME'
+     OUTPUT-FILE requires the installed library `libNAME'.  This option
+     is required even when OUTPUT-FILE is not an executable.
+
+`-module'
+     Creates a library that can be dlopened (*note Dlopened modules::).
+     This option doesn't work for programs.  Module names don't need to
+     be prefixed with `lib'.  In order to prevent name clashes,
+     however, `libNAME' and `NAME' must not be used at the same time in
+     your package.
+
+`-no-fast-install'
+     Disable fast-install mode for the executable OUTPUT-FILE.  Useful
+     if the program won't be necessarily installed.
+
+`-no-install'
+     Link an executable OUTPUT-FILE that can't be installed and
+     therefore doesn't need a wrapper script on systems that allow
+     hardcoding of library paths.  Useful if the program is only used
+     in the build tree, e.g., for testing or generating other files.
+
+`-no-undefined'
+     Declare that OUTPUT-FILE does not depend on any libraries other
+     than the ones listed on the command line, i.e., after linking, it
+     will not have unresolved symbols.  Some platforms require all
+     symbols in shared libraries to be resolved at library creation
+     (*note Inter-library dependencies::), and using this parameter
+     allows `libtool' to assume that this will not happen.
+
+`-o OUTPUT-FILE'
+     Create OUTPUT-FILE from the specified objects and libraries.
+
+`-objectlist FILE'
+     Use a list of object files found in FILE to specify objects.
+
+`-precious-files-regex REGEX'
+     Prevents removal of files from the temporary output directory whose
+     names match this regular expression.  You might specify `\.bbg?$'
+     to keep those files created with `gcc -ftest-coverage' for example.
+
+`-release RELEASE'
+     Specify that the library was generated by release RELEASE of your
+     package, so that users can easily tell which versions are newer
+     than others.  Be warned that no two releases of your package will
+     be binary compatible if you use this flag.  If you want binary
+     compatibility, use the `-version-info' flag instead (*note
+     Versioning::).
+
+`-rpath LIBDIR'
+     If OUTPUT-FILE is a library, it will eventually be installed in
+     LIBDIR.  If OUTPUT-FILE is a program, add LIBDIR to the run-time
+     path of the program.  On platforms that don't support hardcoding
+     library paths into executables and only search PATH for shared
+     libraries, such as when OUTPUT-FILE is a Windows (or other PE
+     platform) DLL, the `.la' control file will be installed in LIBDIR,
+     but see `-bindir' above for the eventual destination of the `.dll'
+     or other library file itself.
+
+`-R LIBDIR'
+     If OUTPUT-FILE is a program, add LIBDIR to its run-time path.  If
+     OUTPUT-FILE is a library, add `-RLIBDIR' to its DEPENDENCY_LIBS,
+     so that, whenever the library is linked into a program, LIBDIR
+     will be added to its run-time path.
+
+`-shared'
+     If OUTPUT-FILE is a program, then link it against any uninstalled
+     shared libtool libraries (this is the default behavior).  If
+     OUTPUT-FILE is a library, then only create a shared library.  In
+     the later case, libtool will signal an error if it was configured
+     with `--disable-shared', or if the host does not support shared
+     libraries.
+
+`-shrext SUFFIX'
+     If OUTPUT-FILE is a libtool library, replace the system's standard
+     file name extension for shared libraries with SUFFIX (most systems
+     use `.so' here).  This option is helpful in certain cases where an
+     application requires that shared libraries (typically modules)
+     have an extension other than the default one.  Please note you
+     must supply the full file name extension including any leading dot.
+
+`-static'
+     If OUTPUT-FILE is a program, then do not link it against any
+     uninstalled shared libtool libraries.  If OUTPUT-FILE is a
+     library, then only create a static library.
+
+`-static-libtool-libs'
+     If OUTPUT-FILE is a program, then do not link it against any
+     shared libtool libraries.  If OUTPUT-FILE is a library, then only
+     create a static library.
+
+`-version-info CURRENT[:REVISION[:AGE]]'
+     If OUTPUT-FILE is a libtool library, use interface version
+     information CURRENT, REVISION, and AGE to build it (*note
+     Versioning::).  Do *not* use this flag to specify package release
+     information, rather see the `-release' flag.
+
+`-version-number MAJOR[:MINOR[:REVISION]]'
+     If OUTPUT-FILE is a libtool library, compute interface version
+     information so that the resulting library uses the specified
+     major, minor and revision numbers.  This is designed to permit
+     libtool to be used with existing projects where identical version
+     numbers are already used across operating systems.  New projects
+     should use the `-version-info' flag instead.
+
+`-weak LIBNAME'
+     if OUTPUT-FILE is a libtool library, declare that it provides a
+     weak LIBNAME interface.  This is a hint to libtool that there is
+     no need to append LIBNAME to the list of dependency libraries of
+     OUTPUT-FILE, because linking against OUTPUT-FILE already supplies
+     the same interface (*note Linking with dlopened modules::).
+
+`-Wc,FLAG'
+`-Xcompiler FLAG'
+     Pass a linker-specific flag directly to the compiler.  With `-Wc,',
+     multiple flags may be separated by commas, whereas `-Xcompiler '
+     passes through commas unchanged.
+
+`-Wl,FLAG'
+`-Xlinker FLAG'
+     Pass a linker-specific flag directly to the linker.
+
+`-XCClinker FLAG'
+     Pass a link-specific flag to the compiler driver (`CC') during
+     linking.
+
+   If the OUTPUT-FILE ends in `.la', then a libtool library is created,
+which must be built only from library objects (`.lo' files).  The
+`-rpath' option is required.  In the current implementation, libtool
+libraries may not depend on other uninstalled libtool libraries (*note
+Inter-library dependencies::).
+
+   If the OUTPUT-FILE ends in `.a', then a standard library is created
+using `ar' and possibly `ranlib'.
+
+   If OUTPUT-FILE ends in `.o' or `.lo', then a reloadable object file
+is created from the input files (generally using `ld -r').  This method
+is often called "partial linking".
+
+   Otherwise, an executable program is created.
+
+
+File: libtool.info,  Node: Execute mode,  Next: Install mode,  Prev: Link mode,  Up: Invoking libtool
+
+4.3 Execute mode
+================
+
+For "execute" mode, the library path is automatically set, then a
+program is executed.
+
+   The first of the MODE-ARGS is treated as a program name, with the
+rest as arguments to that program.
+
+   The following components of MODE-ARGS are treated specially:
+
+`-dlopen FILE'
+     Add the directory containing FILE to the library path.
+
+   This mode sets the library path environment variable according to any
+`-dlopen' flags.
+
+   If any of the ARGS are libtool executable wrappers, then they are
+translated into the name of their corresponding uninstalled binary, and
+any of their required library directories are added to the library path.
+
+
+File: libtool.info,  Node: Install mode,  Next: Finish mode,  Prev: Execute mode,  Up: Invoking libtool
+
+4.4 Install mode
+================
+
+In "install" mode, libtool interprets most of the elements of MODE-ARGS
+as an installation command beginning with `cp', or a BSD-compatible
+`install' program.
+
+   The following components of MODE-ARGS are treated specially:
+
+`-inst-prefix-dir INST-PREFIX-DIR'
+     When installing into a temporary staging area, rather than the
+     final `prefix', this argument is used to reflect the temporary
+     path, in much the same way `automake' uses `DESTDIR'.  For
+     instance, if `prefix' is `/usr/local', but INST-PREFIX-DIR is
+     `/tmp', then the object will be installed under `/tmp/usr/local/'.
+     If the installed object is a libtool library, then the internal
+     fields of that library will reflect only `prefix', not
+     INST-PREFIX-DIR:
+
+          # Directory that this library needs to be installed in:
+          libdir='/usr/local/lib'
+
+     not
+
+          # Directory that this library needs to be installed in:
+          libdir='/tmp/usr/local/lib'
+
+     `inst-prefix' is also used to insure that if the installed object
+     must be relinked upon installation, that it is relinked against
+     the libraries in INST-PREFIX-DIR/`prefix', not `prefix'.
+
+     In truth, this option is not really intended for use when calling
+     libtool directly; it is automatically used when `libtool
+     --mode=install' calls `libtool --mode=relink'.  Libtool does this
+     by analyzing the destination path given in the original `libtool
+     --mode=install' command and comparing it to the expected
+     installation path established during `libtool --mode=link'.
+
+     Thus, end-users need change nothing, and `automake'-style `make
+     install DESTDIR=/tmp' will Just Work(tm) most of the time.  For
+     systems where fast installation can not be turned on, relinking
+     may be needed.  In this case, a `DESTDIR' install will fail.
+
+     Currently it is not generally possible to install into a temporary
+     staging area that contains needed third-party libraries which are
+     not yet visible at their final location.
+
+   The rest of the MODE-ARGS are interpreted as arguments to the `cp'
+or `install' command.
+
+   The command is run, and any necessary unprivileged post-installation
+commands are also completed.
+
+
+File: libtool.info,  Node: Finish mode,  Next: Uninstall mode,  Prev: Install mode,  Up: Invoking libtool
+
+4.5 Finish mode
+===============
+
+"Finish" mode has two functions.  One is to help system administrators
+install libtool libraries so that they can be located and linked into
+user programs.  To invoke this functionality, pass the name of a library
+directory as MODE-ARG.  Running this command may require superuser
+privileges, and the `--dry-run' option may be useful.
+
+   The second is to facilitate transferring libtool libraries to a
+native compilation environment after they were built in a
+cross-compilation environment.  Cross-compilation environments may rely
+on recent libtool features, and running libtool in finish mode will
+make it easier to work with older versions of libtool.  This task is
+performed whenever the MODE-ARG is a `.la' file.
+
+
+File: libtool.info,  Node: Uninstall mode,  Next: Clean mode,  Prev: Finish mode,  Up: Invoking libtool
+
+4.6 Uninstall mode
+==================
+
+"Uninstall" mode deletes installed libraries, executables and objects.
+
+   The first MODE-ARG is the name of the program to use to delete files
+(typically `/bin/rm').
+
+   The remaining MODE-ARGS are either flags for the deletion program
+(beginning with a `-'), or the names of files to delete.
+
+
+File: libtool.info,  Node: Clean mode,  Prev: Uninstall mode,  Up: Invoking libtool
+
+4.7 Clean mode
+==============
+
+"Clean" mode deletes uninstalled libraries, executables, objects and
+libtool's temporary files associated with them.
+
+   The first MODE-ARG is the name of the program to use to delete files
+(typically `/bin/rm').
+
+   The remaining MODE-ARGS are either flags for the deletion program
+(beginning with a `-'), or the names of files to delete.
+
+
+File: libtool.info,  Node: Integrating libtool,  Next: Other languages,  Prev: Invoking libtool,  Up: Top
+
+5 Integrating libtool with your package
+***************************************
+
+This chapter describes how to integrate libtool with your packages so
+that your users can install hassle-free shared libraries.
+
+   There are several ways in which Libtool may be integrated in your
+package, described in the following sections.  Typically, the Libtool
+macro files as well as `ltmain.sh' are copied into your package using
+`libtoolize' and `aclocal' after setting up the `configure.ac' and
+toplevel `Makefile.am', then `autoconf' adds the needed tests to the
+`configure' script.  These individual steps are often automated with
+`autoreconf'.
+
+   Here is a diagram showing how such a typical Libtool configuration
+works when preparing a package for distribution, assuming that `m4' has
+been chosen as location for additional Autoconf macros, and `build-aux'
+as location for auxiliary build tools (*note The Autoconf Manual:
+(autoconf)Input.):
+
+     libtool.m4 -----.                .--> aclocal.m4 -----.
+     ltoptions.m4 ---+  .-> aclocal* -+                    +--> autoconf*
+     ltversion.m4 ---+--+             `--> [copy in m4/] --+       |
+     ltsugar.m4 -----+  |                    ^             |       \/
+     lt~obsolete.m4 -+  +-> libtoolize* -----'             |    configure
+     [ltdl.m4] ------+  |                                  |
+                        `----------------------------------'
+
+     ltmain.sh -----------> libtoolize* -> [copy in build-aux/]
+
+   During configuration, the `libtool' script is generated either
+through `config.status' or `config.lt':
+
+                  .--> config.status* --.
+     configure* --+                     +--> libtool
+                  `--> [config.lt*] ----'      ^
+                                               |
+     ltmain.sh --------------------------------'
+
+   At `make' run time, `libtool' is then invoked as needed as a wrapper
+around compilers, linkers, install and cleanup programs.
+
+   There are alternatives choices to several parts of the setup; for
+example, the Libtool macro files can either be copied or symlinked into
+the package, or copied into `aclocal.m4'.  As another example, an
+external, pre-configured `libtool' script may be used, by-passing most
+of the tests and package-specific setup for Libtool.
+
+* Menu:
+
+* Autoconf macros::             Autoconf macros exported by libtool.
+* Makefile rules::              Writing `Makefile' rules for libtool.
+* Using Automake::              Automatically supporting libtool.
+* Configuring::                 Configuring libtool for a host system.
+* Distributing::                What files to distribute with your package.
+* Static-only libraries::       Sometimes shared libraries are just a pain.
+
+
+File: libtool.info,  Node: Autoconf macros,  Next: Makefile rules,  Up: Integrating libtool
+
+5.1 Autoconf macros exported by libtool
+=======================================
+
+Libtool uses a number of macros to interrogate the host system when it
+is being built, and you can use some of them yourself too.  Although
+there are a great many other macros in the libtool installed m4 files,
+these do not form part of the published interface, and are subject to
+change between releases.
+
+Macros in the `LT_CMD_' namespace check for various shell commands:
+
+ -- Macro: LT_CMD_MAX_LEN
+     Finds the longest command line that can be safely passed to
+     `$SHELL' without being truncated, and store in the shell variable
+     `$max_cmd_len'.  It is only an approximate value, but command
+     lines of this length or shorter are guaranteed not to be truncated.
+
+Macros in the `LT_FUNC_' namespace check characteristics of library
+functions:
+
+ -- Macro: LT_FUNC_DLSYM_USCORE
+     `AC_DEFINE' the preprocessor symbol `DLSYM_USCORE' if we have to
+     add an underscore to symbol-names passed in to `dlsym'.
+
+Macros in the `LT_LIB_' namespace check characteristics of system
+libraries:
+
+ -- Macro: LT_LIB_M
+     Set `LIBM' to the math library or libraries required on this
+     machine, if any.
+
+ -- Macro: LT_LIB_DLLOAD
+     This is the macro used by `libltdl' to determine which dlloaders
+     to use on this machine, if any.  Several shell variables are set
+     (and `AC_SUBST'ed) depending on the dlload interfaces are
+     available on this machine.  `LT_DLLOADERS' contains a list of
+     libtool libraries that can be used, and if necessary also sets
+     `LIBADD_DLOPEN' if additional system libraries are required by the
+     `dlopen' loader, and `LIBADD_SHL_LOAD' if additional system
+     libraries are required by the `shl_load' loader, respectively.
+     Finally some symbols are set in `config.h' depending on the
+     loaders that are found to work: `HAVE_LIBDL', `HAVE_SHL_LOAD',
+     `HAVE_DYLD', `HAVE_DLD'.
+
+Macros in the `LT_PATH_' namespace search the system for the full path
+to particular system commands:
+
+ -- Macro: LT_PATH_LD
+     Add a `--with-gnu-ld' option to `configure'.  Try to find the path
+     to the linker used by `$CC', and whether it is the GNU linker.
+     The result is stored in the shell variable `$LD', which is
+     `AC_SUBST'ed.
+
+ -- Macro: LT_PATH_NM
+     Try to find a BSD-compatible `nm' or a MS-compatible `dumpbin'
+     command on this machine.  The result is stored in the shell
+     variable `$NM', which is `AC_SUBST'ed.
+
+Macros in the `LT_SYS_' namespace probe for system characteristics:
+
+ -- Macro: LT_SYS_DLOPEN_SELF
+     Tests whether a program can dlopen itself, and then also whether
+     the same program can still dlopen itself when statically linked.
+     Results are stored in the shell variables `$enable_dlopen_self' and
+     `enable_dlopen_self_static' respectively.
+
+ -- Macro: LT_SYS_DLOPEN_DEPLIBS
+     Define the preprocessor symbol `LTDL_DLOPEN_DEPLIBS' if the OS
+     needs help to load dependent libraries for `dlopen' (or
+     equivalent).
+
+ -- Macro: LT_SYS_DLSEARCH_PATH
+     Define the preprocessor symbol `LT_DLSEARCH_PATH' to the system
+     default library search path.
+
+ -- Macro: LT_SYS_MODULE_EXT
+     Define the preprocessor symbol `LT_MODULE_EXT' to the extension
+     used for runtime loadable modules.  If you use libltdl to open
+     modules, then you can simply use the libtool library extension,
+     `.la'.
+
+ -- Macro: LT_SYS_MODULE_PATH
+     Define the preprocessor symbol `LT_MODULE_PATH_VAR' to the name of
+     the shell environment variable that determines the run-time module
+     search path.
+
+ -- Macro: LT_SYS_SYMBOL_USCORE
+     Set the shell variable `sys_symbol_underscore' to `no' unless the
+     compiler prefixes global symbols with an underscore.
+
+
+File: libtool.info,  Node: Makefile rules,  Next: Using Automake,  Prev: Autoconf macros,  Up: Integrating libtool
+
+5.2 Writing `Makefile' rules for libtool
+========================================
+
+Libtool is fully integrated with Automake (*note Introduction:
+(automake)Top.), starting with Automake version 1.2.
+
+   If you want to use libtool in a regular `Makefile' (or
+`Makefile.in'), you are on your own.  If you're not using Automake, and
+you don't know how to incorporate libtool into your package you need to
+do one of the following:
+
+  1. Download the latest Automake distribution from your nearest GNU
+     mirror, install it, and start using it.
+
+  2. Learn how to write `Makefile' rules by hand.  They're sometimes
+     complex, but if you're clever enough to write rules for compiling
+     your old libraries, then you should be able to figure out new
+     rules for libtool libraries (hint: examine the `Makefile.in' in
+     the `tests/demo' subdirectory of the libtool distribution... note
+     especially that it was automatically generated from the
+     `Makefile.am' by Automake).
+
+
+File: libtool.info,  Node: Using Automake,  Next: Configuring,  Prev: Makefile rules,  Up: Integrating libtool
+
+5.3 Using Automake with libtool
+===============================
+
+Libtool library support is implemented under the `LTLIBRARIES' primary.
+
+   Here are some samples from the Automake `Makefile.am' in the libtool
+distribution's `demo' subdirectory.
+
+   First, to link a program against a libtool library, just use the
+`program_LDADD'(1) variable:
+
+     bin_PROGRAMS = hell hell_static
+
+     # Build hell from main.c and libhello.la
+     hell_SOURCES = main.c
+     hell_LDADD = libhello.la
+
+     # Create a statically linked version of hell.
+     hell_static_SOURCES = main.c
+     hell_static_LDADD = libhello.la
+     hell_static_LDFLAGS = -static
+
+   You may use the `program_LDFLAGS' variable to stuff in any flags you
+want to pass to libtool while linking `program' (such as `-static' to
+avoid linking uninstalled shared libtool libraries).
+
+   Building a libtool library is almost as trivial... note the use of
+`libhello_la_LDFLAGS' to pass the `-version-info' (*note Versioning::)
+option to libtool:
+
+     # Build a libtool library, libhello.la for installation in libdir.
+     lib_LTLIBRARIES = libhello.la
+     libhello_la_SOURCES = hello.c foo.c
+     libhello_la_LDFLAGS = -version-info 3:12:1
+
+   The `-rpath' option is passed automatically by Automake (except for
+libraries listed as `noinst_LTLIBRARIES'), so you should not specify it.
+
+   *Note Building a Shared Library: (automake)A Shared Library, for
+more information.
+
+   ---------- Footnotes ----------
+
+   (1) Since GNU Automake 1.5, the flags `-dlopen' or `-dlpreopen'
+(*note Link mode::) can be employed with the `program_LDADD' variable.
+Unfortunately, older releases didn't accept these flags, so if you are
+stuck with an ancient Automake, we recommend quoting the flag itself,
+and setting `program_DEPENDENCIES' too:
+
+     program_LDADD = "-dlopen" libfoo.la
+     program_DEPENDENCIES = libfoo.la
+
+
+File: libtool.info,  Node: Configuring,  Next: Distributing,  Prev: Using Automake,  Up: Integrating libtool
+
+5.4 Configuring libtool
+=======================
+
+Libtool requires intimate knowledge of your compiler suite and operating
+system in order to be able to create shared libraries and link against
+them properly.  When you install the libtool distribution, a
+system-specific libtool script is installed into your binary directory.
+
+   However, when you distribute libtool with your own packages (*note
+Distributing::), you do not always know the compiler suite and
+operating system that are used to compile your package.
+
+   For this reason, libtool must be "configured" before it can be used.
+This idea should be familiar to anybody who has used a GNU `configure'
+script.  `configure' runs a number of tests for system features, then
+generates the `Makefile's (and possibly a `config.h' header file),
+after which you can run `make' and build the package.
+
+   Libtool adds its own tests to your `configure' script in order to
+generate a libtool script for the installer's host machine.
+
+* Menu:
+
+* LT_INIT::                     Configuring `libtool' in `configure.ac'.
+* Configure notes::             Platform-specific notes for configuration.
+
+
+File: libtool.info,  Node: LT_INIT,  Next: Configure notes,  Up: Configuring
+
+5.4.1 The `LT_INIT' macro
+-------------------------
+
+If you are using GNU Autoconf (or Automake), you should add a call to
+`LT_INIT' to your `configure.ac' file.  This macro adds many new tests
+to the `configure' script so that the generated libtool script will
+understand the characteristics of the host.  It's the most important of
+a number of macros defined by Libtool:
+
+ -- Macro: LT_PREREQ (VERSION)
+     Ensure that a recent enough version of Libtool is being used.  If
+     the version of Libtool used for `LT_INIT' is earlier than VERSION,
+     print an error message to the standard error output and exit with
+     failure (exit status is 63).  For example:
+
+          LT_PREREQ([2.4.2])
+
+ -- Macro: LT_INIT (OPTIONS)
+ -- Macro: AC_PROG_LIBTOOL
+ -- Macro: AM_PROG_LIBTOOL
+     Add support for the `--enable-shared', `--disable-shared',
+     `--enable-static', `--disable-static', `--with-pic', and
+     `--without-pic' `configure' flags.(1)  `AC_PROG_LIBTOOL' and
+     `AM_PROG_LIBTOOL' are deprecated names for older versions of this
+     macro; `autoupdate' will upgrade your `configure.ac' files.
+
+     By default, this macro turns on shared libraries if they are
+     available, and also enables static libraries if they don't
+     conflict with the shared libraries.  You can modify these defaults
+     by passing either `disable-shared' or `disable-static' in the
+     option list to `LT_INIT', or using `AC_DISABLE_SHARED' or
+     `AC_DISABLE_STATIC'.
+
+          # Turn off shared libraries during beta-testing, since they
+          # make the build process take too long.
+          LT_INIT([disable-shared])
+
+     The user may specify modified forms of the configure flags
+     `--enable-shared' and `--enable-static' to choose whether shared
+     or static libraries are built based on the name of the package.
+     For example, to have shared `bfd' and `gdb' libraries built, but
+     not shared `libg++', you can run all three `configure' scripts as
+     follows:
+
+          trick$ ./configure --enable-shared=bfd,gdb
+
+     In general, specifying `--enable-shared=PKGS' is the same as
+     configuring with `--enable-shared' every package named in the
+     comma-separated PKGS list, and every other package with
+     `--disable-shared'.  The `--enable-static=PKGS' flag behaves
+     similarly, but it uses `--enable-static' and `--disable-static'.
+     The same applies to the `--enable-fast-install=PKGS' flag, which
+     uses `--enable-fast-install' and `--disable-fast-install'.
+
+     The package name `default' matches any packages that have not set
+     their name in the `PACKAGE' environment variable.
+
+     The `--with-pic' and `--without-pic' configure flags can be used
+     to specify whether or not `libtool' uses PIC objects.  By default,
+     `libtool' uses PIC objects for shared libraries and non-PIC
+     objects for static libraries.  The `--with-pic' option also
+     accepts a comma-separated list of package names.  Specifying
+     `--with-pic=PKGS' is the same as configuring every package in PKGS
+     with `--with-pic' and every other package with the default
+     configuration.  The package name `default' is treated the same as
+     for `--enable-shared' and `--enable-static'.
+
+     This macro also sets the shell variable `LIBTOOL_DEPS', that you
+     can use to automatically update the libtool script if it becomes
+     out-of-date.  In order to do that, add to your `configure.ac':
+
+          LT_INIT
+          AC_SUBST([LIBTOOL_DEPS])
+
+     and, to `Makefile.in' or `Makefile.am':
+
+          LIBTOOL_DEPS = @LIBTOOL_DEPS@
+          libtool: $(LIBTOOL_DEPS)
+                  $(SHELL) ./config.status libtool
+
+     If you are using GNU Automake, you can omit the assignment, as
+     Automake will take care of it.  You'll obviously have to create
+     some dependency on `libtool'.
+
+     Aside from `disable-static' and `disable-shared', there are other
+     options that you can pass to `LT_INIT' to modify its behaviour.
+     Here is a full list:
+
+    `dlopen'
+          Enable checking for dlopen support.  This option should be
+          used if the package makes use of the `-dlopen' and
+          `-dlpreopen' libtool flags, otherwise libtool will assume
+          that the system does not support dlopening.
+
+    `win32-dll'
+          This option should be used if the package has been ported to
+          build clean dlls on win32 platforms.  Usually this means that
+          any library data items are exported with
+          `__declspec(dllexport)' and imported with
+          `__declspec(dllimport)'.  If this macro is not used, libtool
+          will assume that the package libraries are not dll clean and
+          will build only static libraries on win32 hosts.
+
+          Provision must be made to pass `-no-undefined' to `libtool'
+          in link mode from the package `Makefile'.  Naturally, if you
+          pass `-no-undefined', you must ensure that all the library
+          symbols *really are* defined at link time!
+
+    `disable-fast-install'
+          Change the default behaviour for `LT_INIT' to disable
+          optimization for fast installation.  The user may still
+          override this default, depending on platform support, by
+          specifying `--enable-fast-install' to `configure'.
+
+    `shared'
+          Change the default behaviour for `LT_INIT' to enable shared
+          libraries.  This is the default on all systems where Libtool
+          knows how to create shared libraries.  The user may still
+          override this default by specifying `--disable-shared' to
+          `configure'.
+
+    `disable-shared'
+          Change the default behaviour for `LT_INIT' to disable shared
+          libraries.  The user may still override this default by
+          specifying `--enable-shared' to `configure'.
+
+    `static'
+          Change the default behaviour for `LT_INIT' to enable static
+          libraries.  This is the default on all systems where shared
+          libraries have been disabled for some reason, and on most
+          systems where shared libraries have been enabled.  If shared
+          libraries are enabled, the user may still override this
+          default by specifying `--disable-static' to `configure'.
+
+    `disable-static'
+          Change the default behaviour for `LT_INIT' to disable static
+          libraries.  The user may still override this default by
+          specifying `--enable-static' to `configure'.
+
+    `pic-only'
+          Change the default behaviour for `libtool' to try to use only
+          PIC objects.  The user may still override this default by
+          specifying `--without-pic' to `configure'.
+
+    `no-pic'
+          Change the default behaviour of `libtool' to try to use only
+          non-PIC objects.  The user may still override this default by
+          specifying `--with-pic' to `configure'.
+
+
+
+ -- Macro: LT_LANG (LANGUAGE)
+     Enable `libtool' support for the language given if it has not yet
+     already been enabled.  Languages accepted are "C++", "Fortran 77",
+     "Java", "Go", and "Windows Resource".
+
+     If Autoconf language support macros such as `AC_PROG_CXX' are used
+     in your `configure.ac', Libtool language support will automatically
+     be enabled.
+
+     Conversely using `LT_LANG' to enable language support for Libtool
+     will automatically enable Autoconf language support as well.
+
+     Both of the following examples are therefore valid ways of adding
+     C++ language support to Libtool.
+
+          LT_INIT
+          LT_LANG([C++])
+
+          LT_INIT
+          AC_PROG_CXX
+
+
+ -- Macro: AC_LIBTOOL_DLOPEN
+     This macro is deprecated, the `dlopen' option to `LT_INIT' should
+     be used instead.
+
+ -- Macro: AC_LIBTOOL_WIN32_DLL
+     This macro is deprecated, the `win32-dll' option to `LT_INIT'
+     should be used instead.
+
+ -- Macro: AC_DISABLE_FAST_INSTALL
+     This macro is deprecated, the `disable-fast-install' option to
+     `LT_INIT' should be used instead.
+
+ -- Macro: AC_DISABLE_SHARED
+ -- Macro: AM_DISABLE_SHARED
+     Change the default behaviour for `LT_INIT' to disable shared
+     libraries.  The user may still override this default by specifying
+     `--enable-shared'.  The option `disable-shared' to `LT_INIT' is a
+     shorthand for this.  `AM_DISABLE_SHARED' is a deprecated alias for
+     `AC_DISABLE_SHARED'.
+
+ -- Macro: AC_ENABLE_SHARED
+ -- Macro: AM_ENABLE_SHARED
+     Change the default behaviour for `LT_INIT' to enable shared
+     libraries.  This is the default on all systems where Libtool knows
+     how to create shared libraries.  The user may still override this
+     default by specifying `--disable-shared'.  The option `shared' to
+     `LT_INIT' is a shorthand for this.  `AM_ENABLE_SHARED' is a
+     deprecated alias for `AC_ENABLE_SHARED'.
+
+ -- Macro: AC_DISABLE_STATIC
+ -- Macro: AM_DISABLE_STATIC
+     Change the default behaviour for `LT_INIT' to disable static
+     libraries.  The user may still override this default by specifying
+     `--enable-static'.  The option `disable-static' to `LT_INIT' is a
+     shorthand for this.  `AM_DISABLE_STATIC' is a deprecated alias for
+     `AC_DISABLE_STATIC'.
+
+ -- Macro: AC_ENABLE_STATIC
+ -- Macro: AM_ENABLE_STATIC
+     Change the default behaviour for `LT_INIT' to enable static
+     libraries.  This is the default on all systems where shared
+     libraries have been disabled for some reason, and on most systems
+     where shared libraries have been enabled.  If shared libraries are
+     enabled, the user may still override this default by specifying
+     `--disable-static'.  The option `static' to `LT_INIT' is a
+     shorthand for this.  `AM_ENABLE_STATIC' is a deprecated alias for
+     `AC_ENABLE_STATIC'.
+
+   The tests in `LT_INIT' also recognize the following environment
+variables:
+
+ -- Variable: CC
+     The C compiler that will be used by the generated `libtool'.  If
+     this is not set, `LT_INIT' will look for `gcc' or `cc'.
+
+ -- Variable: CFLAGS
+     Compiler flags used to generate standard object files.  If this is
+     not set, `LT_INIT' will not use any such flags.  It affects only
+     the way `LT_INIT' runs tests, not the produced `libtool'.
+
+ -- Variable: CPPFLAGS
+     C preprocessor flags.  If this is not set, `LT_INIT' will not use
+     any such flags.  It affects only the way `LT_INIT' runs tests, not
+     the produced `libtool'.
+
+ -- Variable: LD
+     The system linker to use (if the generated `libtool' requires one).
+     If this is not set, `LT_INIT' will try to find out what is the
+     linker used by `CC'.
+
+ -- Variable: LDFLAGS
+     The flags to be used by `libtool' when it links a program.  If
+     this is not set, `LT_INIT' will not use any such flags.  It
+     affects only the way `LT_INIT' runs tests, not the produced
+     `libtool'.
+
+ -- Variable: LIBS
+     The libraries to be used by `LT_INIT' when it links a program.  If
+     this is not set, `LT_INIT' will not use any such flags.  It
+     affects only the way `LT_INIT' runs tests, not the produced
+     `libtool'.
+
+ -- Variable: NM
+     Program to use rather than checking for `nm'.
+
+ -- Variable: RANLIB
+     Program to use rather than checking for `ranlib'.
+
+ -- Variable: LN_S
+     A command that creates a link of a program, a soft-link if
+     possible, a hard-link otherwise.  `LT_INIT' will check for a
+     suitable program if this variable is not set.
+
+ -- Variable: DLLTOOL
+     Program to use rather than checking for `dlltool'.  Only meaningful
+     for Cygwin/MS-Windows.
+
+ -- Variable: OBJDUMP
+     Program to use rather than checking for `objdump'.  Only meaningful
+     for Cygwin/MS-Windows.
+
+ -- Variable: AS
+     Program to use rather than checking for `as'.  Only used on
+     Cygwin/MS-Windows at the moment.
+
+ -- Variable: MANIFEST_TOOL
+     Program to use rather than checking for `mt', the Manifest Tool.
+     Only used on Cygwin/MS-Windows at the moment.
+
+   With 1.3 era libtool, if you wanted to know any details of what
+libtool had discovered about your architecture and environment, you had
+to run the script with `--config' and grep through the results.  This
+idiom was supported up to and including 1.5.x era libtool, where it was
+possible to call the generated libtool script from `configure.ac' as
+soon as `LT_INIT' had completed.  However, one of the features of
+libtool 1.4 was that the libtool configuration was migrated out of a
+separate `ltconfig' file, and added to the `LT_INIT' macro (nee
+`AC_PROG_LIBTOOL'), so the results of the configuration tests were
+available directly to code in `configure.ac', rendering the call out to
+the generated libtool script obsolete.
+
+   Starting with libtool 2.0, the multipass generation of the libtool
+script has been consolidated into a single `config.status' pass, which
+happens after all the code in `configure.ac' has completed.  The
+implication of this is that the libtool script does not exist during
+execution of code from `configure.ac', and so obviously it cannot be
+called for `--config' details anymore.  If you are upgrading projects
+that used this idiom to libtool 2.0 or newer, you should replace those
+calls with direct references to the equivalent Autoconf shell variables
+that are set by the configure time tests before being passed to
+`config.status' for inclusion in the generated libtool script.
+
+ -- Macro: LT_OUTPUT
+     By default, the configured `libtool' script is generated by the
+     call to `AC_OUTPUT' command, and there is rarely any need to use
+     `libtool' from `configure'.  However, sometimes it is necessary to
+     run configure time compile and link tests using `libtool'.  You
+     can add `LT_OUTPUT' to your `configure.ac' any time after
+     `LT_INIT' and any `LT_LANG' calls; that done, `libtool' will be
+     created by a specially generated `config.lt' file, and available
+     for use in later tests.
+
+     Also, when `LT_OUTPUT' is used, for backwards compatibility with
+     Automake regeneration rules, `config.status' will call `config.lt'
+     to regenerate `libtool', rather than generating the file itself.
+
+   When you invoke the `libtoolize' program (*note Invoking
+libtoolize::), it will tell you where to find a definition of
+`LT_INIT'.  If you use Automake, the `aclocal' program will
+automatically add `LT_INIT' support to your `configure' script when it
+sees the invocation of `LT_INIT' in `configure.ac'.
+
+   Because of these changes, and the runtime version compatibility
+checks Libtool now executes, we now advise *against* including a copy of
+`libtool.m4' (and brethren) in `acinclude.m4'.  Instead, you should set
+your project macro directory with `AC_CONFIG_MACRO_DIR'.  When you
+`libtoolize' your project, a copy of the relevant macro definitions
+will be placed in your `AC_CONFIG_MACRO_DIR', where `aclocal' can
+reference them directly from `aclocal.m4'.
+
+   ---------- Footnotes ----------
+
+   (1) `LT_INIT' requires that you define the `Makefile' variable
+`top_builddir' in your `Makefile.in'.  Automake does this
+automatically, but Autoconf users should set it to the relative path to
+the top of your build directory (`../..', for example).
+
+
+File: libtool.info,  Node: Configure notes,  Prev: LT_INIT,  Up: Configuring
+
+5.4.2 Platform-specific configuration notes
+-------------------------------------------
+
+While Libtool tries to hide as many platform-specific features as
+possible, some have to be taken into account when configuring either
+the Libtool package or a libtoolized package.
+
+   * You currently need GNU make to build the Libtool package itself.
+
+   * On AIX there are two different styles of shared linking, one in
+     which symbols are bound at link-time and one in which symbols are
+     bound at runtime only, similar to ELF.  In case of doubt use
+     `LDFLAGS=-Wl,-brtl' for the latter style.
+
+   * On AIX, native tools are to be preferred over binutils; especially
+     for C++ code, if using the AIX Toolbox GCC 4.0 and binutils,
+     configure with `AR=/usr/bin/ar LD=/usr/bin/ld NM='/usr/bin/nm -B''.
+
+   * On AIX, the `/bin/sh' is very slow due to its inefficient handling
+     of here-documents.  A modern shell is preferable:
+          CONFIG_SHELL=/bin/bash; export $CONFIG_SHELL
+          $CONFIG_SHELL ./configure [...]
+
+   * For C++ code with templates, it may be necessary to specify the
+     way the compiler will generate the instantiations.  For Portland
+     pgCC version5, use `CXX='pgCC --one_instantiation_per_object'' and
+     avoid parallel `make'.
+
+   * On Darwin, for C++ code with templates you need two level shared
+     libraries.  Libtool builds these by default if
+     `MACOSX_DEPLOYMENT_TARGET' is set to 10.3 or later at `configure'
+     time.  See `rdar://problem/4135857' for more information on this
+     issue.
+
+   * The default shell on UNICOS 9, a ksh 88e variant, is too buggy to
+     correctly execute the libtool script.  Users are advised to
+     install a modern shell such as GNU bash.
+
+   * Some HP-UX `sed' programs are horribly broken, and cannot handle
+     libtool's requirements, so users may report unusual problems.
+     There is no workaround except to install a working `sed' (such as
+     GNU sed) on these systems.
+
+   * The vendor-distributed NCR MP-RAS `cc' programs emits copyright on
+     standard error that confuse tests on size of `conftest.err'.  The
+     workaround is to specify `CC' when run configure with `CC='cc
+     -Hnocopyr''.
+
+   * Any earlier DG/UX system with ELF executables, such as R3.10 or
+     R4.10, is also likely to work, but hasn't been explicitly tested.
+
+   * On Reliant Unix libtool has only been tested with the Siemens
+     C-compiler and an old version of `gcc' provided by Marco Walther.
+
+   * `libtool.m4', `ltdl.m4' and the `configure.ac' files are marked to
+     use autoconf-mode, which is distributed with GNU Emacs 21,
+     Autoconf itself, and all recent releases of XEmacs.
+
+   * When building on some GNU/Linux systems for multilib targets
+     `libtool' sometimes guesses the wrong paths that the linker and
+     dynamic linker search by default. If this occurs, you may override
+     libtool's guesses at `configure' time by setting the `autoconf'
+     cache variables `lt_cv_sys_lib_search_path_spec' and
+     `lt_cv_sys_lib_dlsearch_path_spec' respectively to the correct
+     search paths.
+
+
+
+File: libtool.info,  Node: Distributing,  Next: Static-only libraries,  Prev: Configuring,  Up: Integrating libtool
+
+5.5 Including libtool in your package
+=====================================
+
+In order to use libtool, you need to include the following files with
+your package:
+
+`config.guess'
+     Attempt to guess a canonical system name.
+
+`config.sub'
+     Canonical system name validation subroutine script.
+
+`install-sh'
+     BSD-compatible `install' replacement script.
+
+`ltmain.sh'
+     A generic script implementing basic libtool functionality.
+
+   Note that the libtool script itself should _not_ be included with
+your package.  *Note Configuring::.
+
+   You should use the `libtoolize' program, rather than manually
+copying these files into your package.
+
+* Menu:
+
+* Invoking libtoolize::         `libtoolize' command line options.
+* Autoconf and LTLIBOBJS::      Autoconf automates LTLIBOBJS generation.
+
+
+File: libtool.info,  Node: Invoking libtoolize,  Next: Autoconf and LTLIBOBJS,  Up: Distributing
+
+5.5.1 Invoking `libtoolize'
+---------------------------
+
+The `libtoolize' program provides a standard way to add libtool support
+to your package.  In the future, it may implement better usage
+checking, or other features to make libtool even easier to use.
+
+   The `libtoolize' program has the following synopsis:
+
+     libtoolize [OPTION]...
+
+and accepts the following options:
+
+`--copy'
+`-c'
+     Copy files from the libtool data directory rather than creating
+     symlinks.
+
+`--debug'
+     Dump a trace of shell script execution to standard output.  This
+     produces a lot of output, so you may wish to pipe it to `less' (or
+     `more') or redirect to a file.
+
+`--dry-run'
+`-n'
+     Don't run any commands that modify the file system, just print them
+     out.
+
+`--force'
+`-f'
+     Replace existing libtool files.  By default, `libtoolize' won't
+     overwrite existing files.
+
+`--help'
+     Display a help message and exit.
+
+`--ltdl [TARGET-DIRECTORY-NAME]'
+     Install libltdl in the TARGET-DIRECTORY-NAME subdirectory of your
+     package.  Normally, the directory is extracted from the argument
+     to `LT_CONFIG_LTDL_DIR' in `configure.ac', though you can also
+     specify a subdirectory name here if you are not using Autoconf for
+     example.  If `libtoolize' can't determine the target directory,
+     `libltdl' is used as the default.
+
+`--no-warn'
+     Normally, Libtoolize tries to diagnose use of deprecated libtool
+     macros and other stylistic issues.  If you are deliberately using
+     outdated calling conventions, this option prevents Libtoolize from
+     explaining how to update your project's Libtool conventions.
+
+`--nonrecursive'
+     If passed in conjunction with `--ltdl', this option will cause the
+     `libltdl' installed by `libtoolize' to be set up for use with a
+     non-recursive `automake' build.  To make use of it, you will need
+     to add the following to the `Makefile.am' of the parent project:
+
+          ## libltdl/Makefile.inc appends to the following variables
+          ## so we set them here before including it:
+          BUILT_SOURCES   =
+
+          AM_CPPFLAGS        =
+          AM_LDFLAGS         =
+
+          include_HEADERS    =
+          noinst_LTLIBRARIES =
+          lib_LTLIBRARIES   =
+          EXTRA_LTLIBRARIES  =
+
+          EXTRA_DIST   =
+
+          CLEANFILES   =
+          MOSTLYCLEANFILES   =
+
+          include libltdl/Makefile.inc
+
+
+`--quiet'
+`-q'
+     Work silently.  `libtoolize --quiet' is used by GNU Automake to
+     add libtool files to your package if necessary.
+
+`--recursive'
+     If passed in conjunction with `--ltdl', this option will cause the
+     `libtoolize' installed `libltdl' to be set up for use with a
+     recursive `automake' build.  To make use of it, you will need to
+     adjust the parent project's `configure.ac':
+
+          AC_CONFIG_FILES([libltdl/Makefile])
+
+     and `Makefile.am':
+
+          SUBDIRS += libltdl
+
+`--subproject'
+     If passed in conjunction with `--ltdl', this option will cause the
+     `libtoolize' installed `libltdl' to be set up for independent
+     configuration and compilation as a self-contained subproject.  To
+     make use of it, you should arrange for your build to call
+     `libltdl/configure', and then run `make' in the `libltdl'
+     directory (or the subdirectory you put libltdl into).  If your
+     project uses Autoconf, you can use the supplied `LT_WITH_LTDL'
+     macro, or else call `AC_CONFIG_SUBDIRS' directly.
+
+     Previous releases of `libltdl' built exclusively in this mode, but
+     now it is the default mode both for backwards compatibility and
+     because, for example, it is suitable for use in projects that wish
+     to use `libltdl', but not use the Autotools for their own build
+     process.
+
+`--verbose'
+`-v'
+     Work noisily!  Give a blow by blow account of what `libtoolize' is
+     doing.
+
+`--version'
+     Print `libtoolize' version information and exit.
+
+   Sometimes it can be useful to pass options to `libtoolize' even
+though it is called by another program, such as `autoreconf'.  A
+limited number of options are parsed from the environment variable
+`LIBTOOLIZE_OPTIONS': currently `--debug', `--no-warn', `--quiet' and
+`--verbose'.  Multiple options passed in `LIBTOOLIZE_OPTIONS' must be
+separated with a space, comma or a colon.
+
+   By default, a warning is issued for unknown options found in
+`LIBTOOLIZE_OPTIONS' unless the first such option is `--no-warn'.
+Where `libtoolize' has always quit on receipt of an unknown option at
+the command line, this and all previous releases of `libtoolize' will
+continue unabated whatever the content of `LIBTOOLIZE_OPTIONS' (modulo
+some possible warning messages).
+
+     trick$ LIBTOOLIZE_OPTIONS=--no-warn,--quiet autoreconf --install
+
+   If `libtoolize' detects an explicit call to `AC_CONFIG_MACRO_DIR'
+(*note The Autoconf Manual: (autoconf)Input.) in your `configure.ac',
+it will put the Libtool macros in the specified directory.
+
+   In the future other Autotools will automatically check the contents
+of `AC_CONFIG_MACRO_DIR', but at the moment it is more portable to add
+the macro directory to `ACLOCAL_AMFLAGS' in `Makefile.am', which is
+where the tools currently look.  If `libtoolize' doesn't see
+`AC_CONFIG_MACRO_DIR', it too will honour the first `-I' argument in
+`ACLOCAL_AMFLAGS' when choosing a directory to store libtool
+configuration macros in.  It is perfectly sensible to use both
+`AC_CONFIG_MACRO_DIR' and `ACLOCAL_AMFLAGS', as long as they are kept
+in synchronisation.
+
+     ACLOCAL_AMFLAGS = -I m4
+
+   When you bootstrap your project with `aclocal', then you will need
+to explicitly pass the same macro directory with `aclocal''s `-I' flag:
+
+     trick$ aclocal -I m4
+
+   If `libtoolize' detects an explicit call to `AC_CONFIG_AUX_DIR'
+(*note The Autoconf Manual: (autoconf)Input.) in your `configure.ac', it
+will put the other support files in the specified directory.  Otherwise
+they too end up in the project root directory.
+
+   Unless `--no-warn' is passed, `libtoolize' displays hints for adding
+libtool support to your package, as well.
+
+
+File: libtool.info,  Node: Autoconf and LTLIBOBJS,  Prev: Invoking libtoolize,  Up: Distributing
+
+5.5.2 Autoconf and `LTLIBOBJS'
+------------------------------
+
+People used to add code like the following to their `configure.ac':
+
+     LTLIBOBJS=`echo "$LIBOBJS" | sed 's/\.[^.]* /.lo /g;s/\.[^.]*$/.lo/'`
+     AC_SUBST([LTLIBOBJS])
+
+This is no longer required (since Autoconf 2.54), and doesn't take
+Automake's deansification support into account either, so doesn't work
+correctly even with ancient Autoconfs!
+
+   Provided you are using a recent (2.54 or better) incarnation of
+Autoconf, the call to `AC_OUTPUT' takes care of setting `LTLIBOBJS' up
+correctly, so you can simply delete such snippets from your
+`configure.ac' if you had them.
+
+
+File: libtool.info,  Node: Static-only libraries,  Prev: Distributing,  Up: Integrating libtool
+
+5.6 Static-only libraries
+=========================
+
+When you are developing a package, it is often worthwhile to configure
+your package with the `--disable-shared' flag, or to override the
+defaults for `LT_INIT' by using the `disable-shared' option (*note The
+`LT_INIT' macro: LT_INIT.).  This prevents libtool from building shared
+libraries, which has several advantages:
+
+   * compilation is twice as fast, which can speed up your development
+     cycle,
+
+   * debugging is easier because you don't need to deal with any
+     complexities added by shared libraries, and
+
+   * you can see how libtool behaves on static-only platforms.
+
+   You may want to put a small note in your package `README' to let
+other developers know that `--disable-shared' can save them time.  The
+following example note is taken from the GIMP(1) distribution `README':
+
+     The GIMP uses GNU Libtool in order to build shared libraries on a
+     variety of systems.  While this is very nice for making usable
+     binaries, it can be a pain when trying to debug a program.  For that
+     reason, compilation of shared libraries can be turned off by
+     specifying the `--disable-shared' option to `configure'.
+
+   ---------- Footnotes ----------
+
+   (1) GNU Image Manipulation Program, for those who haven't taken the
+plunge.  See `http://www.gimp.org/'.
+
+
+File: libtool.info,  Node: Other languages,  Next: Versioning,  Prev: Integrating libtool,  Up: Top
+
+6 Using libtool with other languages
+************************************
+
+Libtool was first implemented in order to add support for writing shared
+libraries in the C language.  However, over time, libtool is being
+integrated with other languages, so that programmers are free to reap
+the benefits of shared libraries in their favorite programming language.
+
+   This chapter describes how libtool interacts with other languages,
+and what special considerations you need to make if you do not use C.
+
+* Menu:
+
+* C++ libraries::               Writing libraries for C++
+* Tags::                        Tags
+
+
+File: libtool.info,  Node: C++ libraries,  Next: Tags,  Up: Other languages
+
+6.1 Writing libraries for C++
+=============================
+
+Creating libraries of C++ code should be a fairly straightforward
+process, because its object files differ from C ones in only three ways:
+
+  1. Because of name mangling, C++ libraries are only usable by the C++
+     compiler that created them.  This decision was made by the
+     designers of C++ in order to protect users from conflicting
+     implementations of features such as constructors, exception
+     handling, and RTTI.
+
+  2. On some systems, the C++ compiler must take special actions for the
+     dynamic linker to run dynamic (i.e., run-time) initializers.  This
+     means that we should not call `ld' directly to link such
+     libraries, and we should use the C++ compiler instead.
+
+  3. C++ compilers will link some Standard C++ library in by default,
+     but libtool does not know which are these libraries, so it cannot
+     even run the inter-library dependence analyzer to check how to
+     link it in.  Therefore, running `ld' to link a C++ program or
+     library is deemed to fail.
+
+   Because of these three issues, Libtool has been designed to always
+use the C++ compiler to compile and link C++ programs and libraries.  In
+some instances the `main()' function of a program must also be compiled
+with the C++ compiler for static C++ objects to be properly initialized.
+
+
+File: libtool.info,  Node: Tags,  Prev: C++ libraries,  Up: Other languages
+
+6.2 Tags
+========
+
+Libtool supports multiple languages through the use of tags.
+Technically a tag corresponds to a set of configuration variables
+associated with a language.  These variables tell `libtool' how it
+should create objects and libraries for each language.
+
+   Tags are defined at `configure'-time for each language activated in
+the package (see `LT_LANG' in *note LT_INIT::).  Here is the
+correspondence between language names and tags names.
+
+Language name      Tag name
+C                  CC
+C++                CXX
+Java               GCJ
+Fortran 77         F77
+Fortran            FC
+Go                 GO
+Windows Resource   RC
+
+   `libtool' tries to automatically infer which tag to use from the
+compiler command being used to compile or link.  If it can't infer a
+tag, then it defaults to the configuration for the `C' language.
+
+   The tag can also be specified using `libtool''s `--tag=TAG' option
+(*note Invoking libtool::).  It is a good idea to do so in `Makefile'
+rules, because that will allow users to substitute the compiler without
+relying on `libtool' inference heuristics.  When no tag is specified,
+`libtool' will default to `CC'; this tag always exists.
+
+   Finally, the set of tags available in a particular project can be
+retrieved by tracing for the `LT_SUPPORTED_TAG' macro (*note Trace
+interface::).
+
+
+File: libtool.info,  Node: Versioning,  Next: Library tips,  Prev: Other languages,  Up: Top
+
+7 Library interface versions
+****************************
+
+The most difficult issue introduced by shared libraries is that of
+creating and resolving runtime dependencies.  Dependencies on programs
+and libraries are often described in terms of a single name, such as
+`sed'.  So, one may say "libtool depends on sed," and that is good
+enough for most purposes.
+
+   However, when an interface changes regularly, we need to be more
+specific: "Gnus 5.1 requires Emacs 19.28 or above."  Here, the
+description of an interface consists of a name, and a "version number."
+
+   Even that sort of description is not accurate enough for some
+purposes.  What if Emacs 20 changes enough to break Gnus 5.1?
+
+   The same problem exists in shared libraries: we require a formal
+version system to describe the sorts of dependencies that programs have
+on shared libraries, so that the dynamic linker can guarantee that
+programs are linked only against libraries that provide the interface
+they require.
+
+* Menu:
+
+* Interfaces::                  What are library interfaces?
+* Libtool versioning::          Libtool's versioning system.
+* Updating version info::       Changing version information before releases.
+* Release numbers::             Breaking binary compatibility for aesthetics.
+
+
+File: libtool.info,  Node: Interfaces,  Next: Libtool versioning,  Up: Versioning
+
+7.1 What are library interfaces?
+================================
+
+Interfaces for libraries may be any of the following (and more):
+
+   * global variables: both names and types
+
+   * global functions: argument types and number, return types, and
+     function names
+
+   * standard input, standard output, standard error, and file formats
+
+   * sockets, pipes, and other inter-process communication protocol
+     formats
+
+   Note that static functions do not count as interfaces, because they
+are not directly available to the user of the library.
+
+
+File: libtool.info,  Node: Libtool versioning,  Next: Updating version info,  Prev: Interfaces,  Up: Versioning
+
+7.2 Libtool's versioning system
+===============================
+
+Libtool has its own formal versioning system.  It is not as flexible as
+some, but it is definitely the simplest of the more powerful versioning
+systems.
+
+   Think of a library as exporting several sets of interfaces,
+arbitrarily represented by integers.  When a program is linked against
+a library, it may use any subset of those interfaces.
+
+   Libtool's description of the interfaces that a program uses is
+simple: it encodes the least and the greatest interface numbers in the
+resulting binary (FIRST-INTERFACE, LAST-INTERFACE).
+
+   The dynamic linker is guaranteed that if a library supports _every_
+interface number between FIRST-INTERFACE and LAST-INTERFACE, then the
+program can be relinked against that library.
+
+   Note that this can cause problems because libtool's compatibility
+requirements are actually stricter than is necessary.
+
+   Say `libhello' supports interfaces 5, 16, 17, 18, and 19, and that
+libtool is used to link `test' against `libhello'.
+
+   Libtool encodes the numbers 5 and 19 in `test', and the dynamic
+linker will only link `test' against libraries that support _every_
+interface between 5 and 19.  So, the dynamic linker refuses to link
+`test' against `libhello'!
+
+   In order to eliminate this problem, libtool only allows libraries to
+declare consecutive interface numbers.  So, `libhello' can declare at
+most that it supports interfaces 16 through 19.  Then, the dynamic
+linker will link `test' against `libhello'.
+
+   So, libtool library versions are described by three integers:
+
+CURRENT
+     The most recent interface number that this library implements.
+
+REVISION
+     The implementation number of the CURRENT interface.
+
+AGE
+     The difference between the newest and oldest interfaces that this
+     library implements.  In other words, the library implements all the
+     interface numbers in the range from number `CURRENT - AGE' to
+     `CURRENT'.
+
+   If two libraries have identical CURRENT and AGE numbers, then the
+dynamic linker chooses the library with the greater REVISION number.
+
+
+File: libtool.info,  Node: Updating version info,  Next: Release numbers,  Prev: Libtool versioning,  Up: Versioning
+
+7.3 Updating library version information
+========================================
+
+If you want to use libtool's versioning system, then you must specify
+the version information to libtool using the `-version-info' flag
+during link mode (*note Link mode::).
+
+   This flag accepts an argument of the form
+`CURRENT[:REVISION[:AGE]]'.  So, passing `-version-info 3:12:1' sets
+CURRENT to 3, REVISION to 12, and AGE to 1.
+
+   If either REVISION or AGE are omitted, they default to 0.  Also note
+that AGE must be less than or equal to the CURRENT interface number.
+
+   Here are a set of rules to help you update your library version
+information:
+
+  1. Start with version information of `0:0:0' for each libtool library.
+
+  2. Update the version information only immediately before a public
+     release of your software.  More frequent updates are unnecessary,
+     and only guarantee that the current interface number gets larger
+     faster.
+
+  3. If the library source code has changed at all since the last
+     update, then increment REVISION (`C:R:A' becomes `C:r+1:A').
+
+  4. If any interfaces have been added, removed, or changed since the
+     last update, increment CURRENT, and set REVISION to 0.
+
+  5. If any interfaces have been added since the last public release,
+     then increment AGE.
+
+  6. If any interfaces have been removed or changed since the last
+     public release, then set AGE to 0.
+
+   *_Never_* try to set the interface numbers so that they correspond
+to the release number of your package.  This is an abuse that only
+fosters misunderstanding of the purpose of library versions.  Instead,
+use the `-release' flag (*note Release numbers::), but be warned that
+every release of your package will not be binary compatible with any
+other release.
+
+   The following explanation may help to understand the above rules a
+bit better: consider that there are three possible kinds of reactions
+from users of your library to changes in a shared library:
+
+  1. Programs using the previous version may use the new version as
+     drop-in replacement, and programs using the new version can also
+     work with the previous one.  In other words, no recompiling nor
+     relinking is needed.  In this case, bump REVISION only, don't touch
+     CURRENT nor AGE.
+
+  2. Programs using the previous version may use the new version as
+     drop-in replacement, but programs using the new version may use
+     APIs not present in the previous one.  In other words, a program
+     linking against the new version may fail with "unresolved symbols"
+     if linking against the old version at runtime: set REVISION to 0,
+     bump CURRENT and AGE.
+
+  3. Programs may need to be changed, recompiled, relinked in order to
+     use the new version.  Bump CURRENT, set REVISION and AGE to 0.
+
+In the above description, _programs_ using the library in question may
+also be replaced by other libraries using it.
+
+
+File: libtool.info,  Node: Release numbers,  Prev: Updating version info,  Up: Versioning
+
+7.4 Managing release information
+================================
+
+Often, people want to encode the name of the package release into the
+shared library so that it is obvious to the user which package their
+programs are linked against.  This convention is used especially on
+GNU/Linux:
+
+     trick$ ls /usr/lib/libbfd*
+     /usr/lib/libbfd.a           /usr/lib/libbfd.so.2.7.0.2
+     /usr/lib/libbfd.so
+     trick$
+
+   On `trick', `/usr/lib/libbfd.so' is a symbolic link to
+`libbfd.so.2.7.0.2', which was distributed as a part of
+`binutils-2.7.0.2'.
+
+   Unfortunately, this convention conflicts directly with libtool's
+idea of library interface versions, because the library interface
+rarely changes at the same time that the release number does, and the
+library suffix is never the same across all platforms.
+
+   So, in order to accommodate both views, you can use the `-release'
+flag in order to set release information for libraries for which you do
+not want to use `-version-info'.  For the `libbfd' example, the next
+release that uses libtool should be built with `-release 2.9.0', which
+will produce the following files on GNU/Linux:
+
+     trick$ ls /usr/lib/libbfd*
+     /usr/lib/libbfd-2.9.0.so     /usr/lib/libbfd.a
+     /usr/lib/libbfd.so
+     trick$
+
+   In this case, `/usr/lib/libbfd.so' is a symbolic link to
+`libbfd-2.9.0.so'.  This makes it obvious that the user is dealing with
+`binutils-2.9.0', without compromising libtool's idea of interface
+versions.
+
+   Note that this option causes a modification of the library name, so
+do not use it unless you want to break binary compatibility with any
+past library releases.  In general, you should only use `-release' for
+package-internal libraries or for ones whose interfaces change very
+frequently.
+
+
+File: libtool.info,  Node: Library tips,  Next: Inter-library dependencies,  Prev: Versioning,  Up: Top
+
+8 Tips for interface design
+***************************
+
+Writing a good library interface takes a lot of practice and thorough
+understanding of the problem that the library is intended to solve.
+
+   If you design a good interface, it won't have to change often, you
+won't have to keep updating documentation, and users won't have to keep
+relearning how to use the library.
+
+   Here is a brief list of tips for library interface design that may
+help you in your exploits:
+
+Plan ahead
+     Try to make every interface truly minimal, so that you won't need
+     to delete entry points very often.
+
+Avoid interface changes
+     Some people love redesigning and changing entry points just for
+     the heck of it (note: _renaming_ a function is considered changing
+     an entry point).  Don't be one of those people.  If you must
+     redesign an interface, then try to leave compatibility functions
+     behind so that users don't need to rewrite their existing code.
+
+Use opaque data types
+     The fewer data type definitions a library user has access to, the
+     better.  If possible, design your functions to accept a generic
+     pointer (that you can cast to an internal data type), and provide
+     access functions rather than allowing the library user to directly
+     manipulate the data.  That way, you have the freedom to change the
+     data structures without changing the interface.
+
+     This is essentially the same thing as using abstract data types and
+     inheritance in an object-oriented system.
+
+Use header files
+     If you are careful to document each of your library's global
+     functions and variables in header files, and include them in your
+     library source files, then the compiler will let you know if you
+     make any interface changes by accident (*note C header files::).
+
+Use the `static' keyword (or equivalent) whenever possible
+     The fewer global functions your library has, the more flexibility
+     you'll have in changing them.  Static functions and variables may
+     change forms as often as you like... your users cannot access
+     them, so they aren't interface changes.
+
+Be careful with array dimensions
+     The number of elements in a global array is part of an interface,
+     even if the header just declares `extern int foo[];'.  This is
+     because on i386 and some other SVR4/ELF systems, when an
+     application references data in a shared library the size of that
+     data (whatever its type) is included in the application
+     executable.  If you might want to change the size of an array or
+     string then provide a pointer not the actual array.
+
+* Menu:
+
+* C header files::              How to write portable include files.
+
+
+File: libtool.info,  Node: C header files,  Up: Library tips
+
+8.1 Writing C header files
+==========================
+
+Writing portable C header files can be difficult, since they may be read
+by different types of compilers:
+
+C++ compilers
+     C++ compilers require that functions be declared with full
+     prototypes, since C++ is more strongly typed than C.  C functions
+     and variables also need to be declared with the `extern "C"'
+     directive, so that the names aren't mangled.  *Note C++
+     libraries::, for other issues relevant to using C++ with libtool.
+
+ANSI C compilers
+     ANSI C compilers are not as strict as C++ compilers, but functions
+     should be prototyped to avoid unnecessary warnings when the header
+     file is `#include'd.
+
+non-ANSI C compilers
+     Non-ANSI compilers will report errors if functions are prototyped.
+
+   These complications mean that your library interface headers must use
+some C preprocessor magic in order to be usable by each of the above
+compilers.
+
+   `foo.h' in the `tests/demo' subdirectory of the libtool distribution
+serves as an example for how to write a header file that can be safely
+installed in a system directory.
+
+   Here are the relevant portions of that file:
+
+     /* BEGIN_C_DECLS should be used at the beginning of your declarations,
+        so that C++ compilers don't mangle their names.  Use END_C_DECLS at
+        the end of C declarations. */
+     #undef BEGIN_C_DECLS
+     #undef END_C_DECLS
+     #ifdef __cplusplus
+     # define BEGIN_C_DECLS extern "C" {
+     # define END_C_DECLS }
+     #else
+     # define BEGIN_C_DECLS /* empty */
+     # define END_C_DECLS /* empty */
+     #endif
+
+     /* PARAMS is a macro used to wrap function prototypes, so that
+        compilers that don't understand ANSI C prototypes still work,
+        and ANSI C compilers can issue warnings about type mismatches. */
+     #undef PARAMS
+     #if defined (__STDC__) || defined (_AIX) \
+             || (defined (__mips) && defined (_SYSTYPE_SVR4)) \
+             || defined(WIN32) || defined(__cplusplus)
+     # define PARAMS(protos) protos
+     #else
+     # define PARAMS(protos) ()
+     #endif
+
+   These macros are used in `foo.h' as follows:
+
+     #ifndef FOO_H
+     #define FOO_H 1
+
+     /* The above macro definitions. */
+     #include "..."
+
+     BEGIN_C_DECLS
+
+     int foo PARAMS((void));
+     int hello PARAMS((void));
+
+     END_C_DECLS
+
+     #endif /* !FOO_H */
+
+   Note that the `#ifndef FOO_H' prevents the body of `foo.h' from
+being read more than once in a given compilation.
+
+   Also the only thing that must go outside the
+`BEGIN_C_DECLS'/`END_C_DECLS' pair are `#include' lines.  Strictly
+speaking it is only C symbol names that need to be protected, but your
+header files will be more maintainable if you have a single pair of
+these macros around the majority of the header contents.
+
+   You should use these definitions of `PARAMS', `BEGIN_C_DECLS', and
+`END_C_DECLS' into your own headers.  Then, you may use them to create
+header files that are valid for C++, ANSI, and non-ANSI compilers(1).
+
+   Do not be naive about writing portable code.  Following the tips
+given above will help you miss the most obvious problems, but there are
+definitely other subtle portability issues.  You may need to cope with
+some of the following issues:
+
+   * Pre-ANSI compilers do not always support the `void *' generic
+     pointer type, and so need to use `char *' in its place.
+
+   * The `const', `inline' and `signed' keywords are not supported by
+     some compilers, especially pre-ANSI compilers.
+
+   * The `long double' type is not supported by many compilers.
+
+   ---------- Footnotes ----------
+
+   (1) We used to recommend `__P', `__BEGIN_DECLS' and `__END_DECLS'.
+This was bad advice since symbols (even preprocessor macro names) that
+begin with an underscore are reserved for the use of the compiler.
+
+
+File: libtool.info,  Node: Inter-library dependencies,  Next: Dlopened modules,  Prev: Library tips,  Up: Top
+
+9 Inter-library dependencies
+****************************
+
+By definition, every shared library system provides a way for
+executables to depend on libraries, so that symbol resolution is
+deferred until runtime.
+
+   An "inter-library dependency" is one in which a library depends on
+other libraries.  For example, if the libtool library `libhello' uses
+the `cos' function, then it has an inter-library dependency on `libm',
+the math library that implements `cos'.
+
+   Some shared library systems provide this feature in an
+internally-consistent way: these systems allow chains of dependencies of
+potentially infinite length.
+
+   However, most shared library systems are restricted in that they only
+allow a single level of dependencies.  In these systems, programs may
+depend on shared libraries, but shared libraries may not depend on other
+shared libraries.
+
+   In any event, libtool provides a simple mechanism for you to declare
+inter-library dependencies: for every library `libNAME' that your own
+library depends on, simply add a corresponding `-lNAME' option to the
+link line when you create your library.  To make an example of our
+`libhello' that depends on `libm':
+
+     burger$ libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
+                     -rpath /usr/local/lib -lm
+     burger$
+
+   When you link a program against `libhello', you don't need to
+specify the same `-l' options again: libtool will do that for you, in
+order to guarantee that all the required libraries are found.  This
+restriction is only necessary to preserve compatibility with static
+library systems and simple dynamic library systems.
+
+   Some platforms, such as Windows, do not even allow you this
+flexibility.  In order to build a shared library, it must be entirely
+self-contained or it must have dependencies known at link time (that is,
+have references only to symbols that are found in the `.lo' files or
+the specified `-l' libraries), and you need to specify the
+`-no-undefined' flag.  By default, libtool builds only static libraries
+on these kinds of platforms.
+
+   The simple-minded inter-library dependency tracking code of libtool
+releases prior to 1.2 was disabled because it was not clear when it was
+possible to link one library with another, and complex failures would
+occur.  A more complex implementation of this concept was re-introduced
+before release 1.3, but it has not been ported to all platforms that
+libtool supports.  The default, conservative behavior is to avoid
+linking one library with another, introducing their inter-dependencies
+only when a program is linked with them.
+
+
+File: libtool.info,  Node: Dlopened modules,  Next: Using libltdl,  Prev: Inter-library dependencies,  Up: Top
+
+10 Dlopened modules
+*******************
+
+It can sometimes be confusing to discuss "dynamic linking", because the
+term is used to refer to two different concepts:
+
+  1. Compiling and linking a program against a shared library, which is
+     resolved automatically at run time by the dynamic linker.  In this
+     process, dynamic linking is transparent to the application.
+
+  2. The application calling functions such as `dlopen' that load
+     arbitrary, user-specified modules at runtime.  This type of dynamic
+     linking is explicitly controlled by the application.
+
+   To mitigate confusion, this manual refers to the second type of
+dynamic linking as "dlopening" a module.
+
+   The main benefit to dlopening object modules is the ability to access
+compiled object code to extend your program, rather than using an
+interpreted language.  In fact, dlopen calls are frequently used in
+language interpreters to provide an efficient way to extend the
+language.
+
+   Libtool provides support for dlopened modules.  However, you should
+indicate that your package is willing to use such support, by using the
+`LT_INIT' option `dlopen' in `configure.ac'.  If this option is not
+given, libtool will assume no dlopening mechanism is available, and
+will try to simulate it.
+
+   This chapter discusses how you as a dlopen application developer
+might use libtool to generate dlopen-accessible modules.
+
+* Menu:
+
+* Building modules::            Creating dlopenable objects and libraries.
+* Dlpreopening::                Dlopening that works on static platforms.
+* Linking with dlopened modules::  Using dlopenable modules in libraries.
+* Finding the dlname::          Choosing the right file to `dlopen'.
+* Dlopen issues::               Unresolved problems that need your attention.
+
+
+File: libtool.info,  Node: Building modules,  Next: Dlpreopening,  Up: Dlopened modules
+
+10.1 Building modules to dlopen
+===============================
+
+On some operating systems, a program symbol must be specially declared
+in order to be dynamically resolved with the `dlsym' (or equivalent)
+function.  Libtool provides the `-export-dynamic' and `-module' link
+flags (*note Link mode::), for you to make that declaration.  You need
+to use these flags if you are linking an application program that
+dlopens other modules or a libtool library that will also be dlopened.
+
+   For example, if we wanted to build a shared library, `hello', that
+would later be dlopened by an application, we would add `-module' to
+the other link flags:
+
+     burger$ libtool --mode=link gcc -module -o hello.la foo.lo \
+                     hello.lo -rpath /usr/local/lib -lm
+     burger$
+
+   If symbols from your _executable_ are needed to satisfy unresolved
+references in a library you want to dlopen you will have to use the flag
+`-export-dynamic'.  You should use `-export-dynamic' while linking the
+executable that calls dlopen:
+
+     burger$ libtool --mode=link gcc -export-dynamic -o helldl main.o
+     burger$
+
+
+File: libtool.info,  Node: Dlpreopening,  Next: Linking with dlopened modules,  Prev: Building modules,  Up: Dlopened modules
+
+10.2 Dlpreopening
+=================
+
+Libtool provides special support for dlopening libtool object and
+libtool library files, so that their symbols can be resolved _even on
+platforms without any `dlopen' and `dlsym' functions_.
+
+   Consider the following alternative ways of loading code into your
+program, in order of increasing "laziness":
+
+  1. Linking against object files that become part of the program
+     executable, whether or not they are referenced.  If an object file
+     cannot be found, then the compile time linker refuses to create
+     the executable.
+
+  2. Declaring a static library to the linker, so that it is searched
+     at link time in order to satisfy any undefined references in the
+     above object files.  If the static library cannot be found, then
+     the compile time linker refuses to create the executable.
+
+  3. Declaring a shared library to the runtime linker, so that it is
+     searched at runtime in order to satisfy any undefined references
+     in the above files.  If the shared library cannot be found, then
+     the dynamic linker aborts the program before it runs.
+
+  4. Dlopening a module, so that the application can resolve its own,
+     dynamically-computed references.  If there is an error opening the
+     module, or the module is not found, then the application can
+     recover without crashing.
+
+   Libtool emulates `-dlopen' on static platforms by linking objects
+into the program at compile time, and creating data structures that
+represent the program's symbol table.  In order to use this feature,
+you must declare the objects you want your application to dlopen by
+using the `-dlopen' or `-dlpreopen' flags when you link your program
+(*note Link mode::).
+
+ -- Data Type: lt_dlsymlist typedef struct { const char *NAME;
+          void *ADDRESS; } lt_dlsymlist
+     The NAME attribute is a null-terminated character string of the
+     symbol name, such as `"fprintf"'.  The ADDRESS attribute is a
+     generic pointer to the appropriate object, such as `&fprintf'.
+
+ -- Variable: const lt_dlsymlist  lt_preloaded_symbols[]
+     An array of `lt_dlsymlist' structures, representing all the
+     preloaded symbols linked into the program proper.  For each module
+     `-dlpreopen'ed by the Libtool linked program there is an element
+     with the NAME of the module and an ADDRESS of `0', followed by all
+     symbols exported from this file.  For the executable itself the
+     special name `@PROGRAM@' is used.  The last element of all has a
+     NAME and ADDRESS of `0'.
+
+     To facilitate inclusion of symbol lists into libraries,
+     `lt_preloaded_symbols' is `#define'd to a suitably unique name in
+     `ltdl.h'.
+
+     This variable may not be declared `const' on some systems due to
+     relocation issues.
+
+   Some compilers may allow identifiers that are not valid in ANSI C,
+such as dollar signs.  Libtool only recognizes valid ANSI C symbols (an
+initial ASCII letter or underscore, followed by zero or more ASCII
+letters, digits, and underscores), so non-ANSI symbols will not appear
+in `lt_preloaded_symbols'.
+
+ -- Function: int lt_dlpreload (const lt_dlsymlist *PRELOADED)
+     Register the list of preloaded modules PRELOADED.  If PRELOADED is
+     `NULL', then all previously registered symbol lists, except the
+     list set by `lt_dlpreload_default', are deleted.  Return 0 on
+     success.
+
+ -- Function: int lt_dlpreload_default (const lt_dlsymlist *PRELOADED)
+     Set the default list of preloaded modules to PRELOADED, which
+     won't be deleted by `lt_dlpreload'.  Note that this function does
+     _not_ require libltdl to be initialized using `lt_dlinit' and can
+     be used in the program to register the default preloaded modules.
+     Instead of calling this function directly, most programs will use
+     the macro `LTDL_SET_PRELOADED_SYMBOLS'.
+
+     Return 0 on success.
+
+ -- Macro: LTDL_SET_PRELOADED_SYMBOLS
+     Set the default list of preloaded symbols.  Should be used in your
+     program to initialize libltdl's list of preloaded modules.
+
+          #include <ltdl.h>
+
+          int main() {
+            /* ... */
+            LTDL_SET_PRELOADED_SYMBOLS();
+            /* ... */
+          }
+
+ -- Function Type: int lt_dlpreload_callback_func (lt_dlhandle HANDLE)
+     Functions of this type can be passed to `lt_dlpreload_open', which
+     in turn will call back into a function thus passed for each
+     preloaded module that it opens.
+
+ -- Function: int lt_dlpreload_open (const char *ORIGINATOR,
+          lt_dlpreload_callback_func *FUNC)
+     Load all of the preloaded modules for ORIGINATOR.  For every
+     module opened in this way, call FUNC.
+
+     To open all of the modules preloaded into `libhell.la' (presumably
+     from within the `libhell.a' initialisation code):
+
+          #define preloaded_symbols lt_libhell_LTX_preloaded_symbols
+
+          static int hell_preload_callback (lt_dlhandle handle);
+
+          int
+          hell_init (void)
+          {
+            ...
+            if (lt_dlpreload (&preloaded_symbols) == 0)
+              {
+                lt_dlpreload_open ("libhell", preload_callback);
+              }
+            ...
+          }
+
+     Note that to prevent clashes between multiple preloaded modules,
+     the preloaded symbols are accessed via a mangled symbol name: to
+     get the symbols preloaded into `libhell', you must prefix
+     `preloaded_symbols' with `lt_'; the originator name, `libhell' in
+     this case; and `_LTX_'.  That is,
+     `lt_libhell_LTX_preloaded_symbols' here.
+
+
+File: libtool.info,  Node: Linking with dlopened modules,  Next: Finding the dlname,  Prev: Dlpreopening,  Up: Dlopened modules
+
+10.3 Linking with dlopened modules
+==================================
+
+When, say, an interpreter application uses dlopened modules to extend
+the list of methods it provides, an obvious abstraction for the
+maintainers of the interpreter is to have all methods (including the
+built in ones supplied with the interpreter) accessed through dlopen.
+For one thing, the dlopening functionality will be tested even during
+routine invocations.  For another, only one subsystem has to be written
+for getting methods into the interpreter.
+
+   The downside of this abstraction is, of course, that environments
+that provide only static linkage can't even load the intrinsic
+interpreter methods.  Not so!  We can statically link those methods by
+*dlpreopening* them.
+
+   Unfortunately, since platforms such as AIX and cygwin require that
+all library symbols must be resolved at compile time, the interpreter
+maintainers will need to provide a library to both its own dlpreopened
+modules, and third-party modules loaded by dlopen.  In itself, that is
+not so bad, except that the interpreter too must provide those same
+symbols otherwise it will be impossible to resolve all the symbols
+required by the modules as they are loaded.  Things are even worse if
+the code that loads the modules for the interpreter is itself in a
+library - and that is usually the case for any non-trivial application.
+Modern platforms take care of this by automatically loading all of a
+module's dependency libraries as the module is loaded (libltdl can do
+this even on platforms that can't do it by themselves).  In the end,
+this leads to problems with duplicated symbols and prevents modules
+from loading, and prevents the application from compiling when modules
+are preloaded.
+
+     ,-------------.    ,------------------.    ,-----------------.
+     | Interpreter |---->     Module------------>   Third-party   |
+     `-------------'    |     Loader       |    |Dlopened Modules |
+                        |        |         |    `-----------------'
+                        |,-------v--------.|             |
+                        ||  Dlpreopened   ||             |
+                        ||    Modules     ||             |
+                        |`----------------'|             |
+                        |        |         |             |
+                        |,-------v--------.|    ,--------v--------.
+                        ||Module Interface||    |Module Interface |
+                        ||    Library     ||    |     Library     |
+                        |`----------------'|    `-----------------'
+                        `------------------'
+
+   Libtool has the concept of "weak library interfaces" to circumvent
+this problem.  Recall that the code that dlopens method-provider
+modules for the interpreter application resides in a library: All of
+the modules and the dlopener library itself should be linked against
+the common library that resolves the module symbols at compile time.
+To guard against duplicate symbol definitions, and for dlpreopened
+modules to work at all in this scenario, the dlopener library must
+declare that it provides a weak library interface to the common symbols
+in the library it shares with the modules.  That way, when `libtool'
+links the *Module Loader* library with some *Dlpreopened Modules* that
+were in turn linked against the *Module Interface Library*, it knows
+that the *Module Loader* provides an already loaded *Module Interface
+Library* to resolve symbols for the *Dlpreopened Modules*, and doesn't
+ask the compiler driver to link an identical *Module Interface Library*
+dependency library too.
+
+   In conjunction with Automake, the `Makefile.am' for the *Module
+Loader* might look like this:
+
+     lib_LTLIBRARIES = libinterface.la libloader.la
+
+     libinterface_la_SOURCES = interface.c interface.h
+     libinterface_la_LDFLAGS = -version-info 3:2:1
+
+     libloader_la_SOURCES    = loader.c
+     libloader_la_LDFLAGS    = -weak libinterface.la \
+                               -version-info 3:2:1 \
+                               -dlpreopen ../modules/intrinsics.la
+     libloader_la_LIBADD     = $(libinterface_la_OBJECTS)
+
+   And the `Makefile.am' for the `intrinsics.la' module in a sibling
+`modules' directory might look like this:
+
+     AM_CPPFLAGS             = -I$(srcdir)/../libloader
+     AM_LDFLAGS              = -no-undefined -module -avoid-version \
+                               -export-dynamic
+
+     noinst_LTLIBRARIES      = intrinsics.la
+
+     intrinsics_la_LIBADD    = ../libloader/libinterface.la
+
+     ../libloader/libinterface.la:
+             cd ../libloader && $(MAKE) $(AM_MAKEFLAGS) libinterface.la
+
+   For a more complex example, see the sources of `libltdl' in the
+Libtool distribution, which is built with the help of the `-weak'
+option.
+
+
+File: libtool.info,  Node: Finding the dlname,  Next: Dlopen issues,  Prev: Linking with dlopened modules,  Up: Dlopened modules
+
+10.4 Finding the correct name to dlopen
+=======================================
+
+After a library has been linked with `-module', it can be dlopened.
+Unfortunately, because of the variation in library names, your package
+needs to determine the correct file to dlopen.
+
+   The most straightforward and flexible implementation is to determine
+the name at runtime, by finding the installed `.la' file, and searching
+it for the following lines:
+
+     # The name that we can `dlopen'.
+     dlname='DLNAME'
+
+   If DLNAME is empty, then the library cannot be dlopened.  Otherwise,
+it gives the dlname of the library.  So, if the library was installed
+as `/usr/local/lib/libhello.la', and the DLNAME was `libhello.so.3',
+then `/usr/local/lib/libhello.so.3' should be dlopened.
+
+   If your program uses this approach, then it should search the
+directories listed in the `LD_LIBRARY_PATH'(1) environment variable, as
+well as the directory where libraries will eventually be installed.
+Searching this variable (or equivalent) will guarantee that your
+program can find its dlopened modules, even before installation,
+provided you have linked them using libtool.
+
+   ---------- Footnotes ----------
+
+   (1) `LIBPATH' on AIX, and `SHLIB_PATH' on HP-UX.
+
+
+File: libtool.info,  Node: Dlopen issues,  Prev: Finding the dlname,  Up: Dlopened modules
+
+10.5 Unresolved dlopen issues
+=============================
+
+The following problems are not solved by using libtool's dlopen support:
+
+   * Dlopen functions are generally only available on shared library
+     platforms.  If you want your package to be portable to static
+     platforms, you have to use either libltdl (*note Using libltdl::)
+     or develop your own alternatives to dlopening dynamic code.  Most
+     reasonable solutions involve writing wrapper functions for the
+     `dlopen' family, which do package-specific tricks when dlopening
+     is unsupported or not available on a given platform.
+
+   * There are major differences in implementations of the `dlopen'
+     family of functions.  Some platforms do not even use the same
+     function names (notably HP-UX, with its `shl_load' family).
+
+   * The application developer must write a custom search function in
+     order to discover the correct module filename to supply to
+     `dlopen'.
+
+
+File: libtool.info,  Node: Using libltdl,  Next: Trace interface,  Prev: Dlopened modules,  Up: Top
+
+11 Using libltdl
+****************
+
+Libtool provides a small library, called `libltdl', that aims at hiding
+the various difficulties of dlopening libraries from programmers.  It
+consists of a few headers and small C source files that can be
+distributed with applications that need dlopening functionality.  On
+some platforms, whose dynamic linkers are too limited for a simple
+implementation of `libltdl' services, it requires GNU DLD, or it will
+only emulate dynamic linking with libtool's dlpreopening mechanism.
+
+libltdl supports currently the following dynamic linking mechanisms:
+
+   * `dlopen' (POSIX compliant systems, GNU/Linux, etc.)
+
+   * `shl_load' (HP-UX)
+
+   * `LoadLibrary' (Win16 and Win32)
+
+   * `load_add_on' (BeOS)
+
+   * `NSAddImage' or `NSLinkModule' (Darwin and Mac OS X)
+
+   * GNU DLD (emulates dynamic linking for static libraries)
+
+   * libtool's dlpreopen (see *note Dlpreopening::)
+
+libltdl is licensed under the terms of the GNU Lesser General Public
+License, with the following exception:
+
+     As a special exception to the GNU Lesser General Public License,
+     if you distribute this file as part of a program or library that
+     is built using GNU Libtool, you may include it under the same
+     distribution terms that you use for the rest of that program.
+
+* Menu:
+
+* Libltdl interface::           How to use libltdl in your programs.
+* Modules for libltdl::         Creating modules that can be `dlopen'ed.
+* Thread Safety in libltdl::    Registering callbacks for multi-thread safety.
+* User defined module data::    Associating data with loaded modules.
+* Module loaders for libltdl::  Creating user defined module loaders.
+* Distributing libltdl::        How to distribute libltdl with your package.
+
+
+File: libtool.info,  Node: Libltdl interface,  Next: Modules for libltdl,  Up: Using libltdl
+
+11.1 How to use libltdl in your programs
+========================================
+
+The libltdl API is similar to the POSIX dlopen interface, which is very
+simple but powerful.
+
+To use libltdl in your program you have to include the header file
+`ltdl.h':
+
+     #include <ltdl.h>
+
+The early releases of libltdl used some symbols that violated the POSIX
+namespace conventions.  These symbols are now deprecated, and have been
+replaced by those described here.  If you have code that relies on the
+old deprecated symbol names, defining `LT_NON_POSIX_NAMESPACE' before
+you include `ltdl.h' provides conversion macros.  Whichever set of
+symbols you use, the new API is not binary compatible with the last, so
+you will need to recompile your application in order to use this
+version of libltdl.
+
+Note that libltdl is not well tested in a multithreaded environment,
+though the intention is that it should work (*note Using libltdl in a
+multi threaded environment: Thread Safety in libltdl.).  It was
+reported that GNU/Linux's glibc 2.0's `dlopen' with `RTLD_LAZY' (which
+libltdl uses by default) is not thread-safe, but this problem is
+supposed to be fixed in glibc 2.1.  On the other hand, `RTLD_NOW' was
+reported to introduce problems in multi-threaded applications on
+FreeBSD.  Working around these problems is left as an exercise for the
+reader; contributions are certainly welcome.
+
+The following macros are defined by including `ltdl.h':
+
+ -- Macro: LT_PATHSEP_CHAR
+     `LT_PATHSEP_CHAR' is the system-dependent path separator, that is,
+     `;' on Windows and `:' everywhere else.
+
+ -- Macro: LT_DIRSEP_CHAR
+     If `LT_DIRSEP_CHAR' is defined, it can be used as directory
+     separator in addition to `/'.  On Windows, this contains `\'.
+
+The following types are defined in `ltdl.h':
+
+ -- Type: lt_dlhandle
+     `lt_dlhandle' is a module "handle".  Every lt_dlopened module has
+     a handle associated with it.
+
+ -- Type: lt_dladvise
+     `lt_dladvise' is used to control optional module loading modes.
+     If it is not used, the default mode of the underlying system module
+     loader is used.
+
+ -- Type: lt_dlsymlist
+     `lt_dlsymlist' is a symbol list for dlpreopened modules.  This
+     structure is described in *note Dlpreopening::.
+
+libltdl provides the following functions:
+
+ -- Function: int lt_dlinit (void)
+     Initialize libltdl.  This function must be called before using
+     libltdl and may be called several times.  Return 0 on success,
+     otherwise the number of errors.
+
+ -- Function: int lt_dlexit (void)
+     Shut down libltdl and close all modules.  This function will only
+     then shut down libltdl when it was called as many times as
+     `lt_dlinit' has been successfully called.  Return 0 on success,
+     otherwise the number of errors.
+
+ -- Function: lt_dlhandle lt_dlopen (const char *FILENAME)
+     Open the module with the file name FILENAME and return a handle
+     for it.  `lt_dlopen' is able to open libtool dynamic modules,
+     preloaded static modules, the program itself and native dynamic
+     modules(1).
+
+     Unresolved symbols in the module are resolved using its dependency
+     libraries and previously dlopened modules.  If the executable using
+     this module was linked with the `-export-dynamic' flag, then the
+     global symbols in the executable will also be used to resolve
+     references in the module.
+
+     If FILENAME is `NULL' and the program was linked with
+     `-export-dynamic' or `-dlopen self', `lt_dlopen' will return a
+     handle for the program itself, which can be used to access its
+     symbols.
+
+     If libltdl cannot find the library and the file name FILENAME does
+     not have a directory component it will additionally look in the
+     following search paths for the module (in the following order):
+
+       1. user-defined search path: This search path can be changed by
+          the program using the functions `lt_dlsetsearchpath',
+          `lt_dladdsearchdir' and `lt_dlinsertsearchdir'.
+
+       2. libltdl's search path: This search path is the value of the
+          environment variable `LTDL_LIBRARY_PATH'.
+
+       3. system library search path: The system dependent library
+          search path (e.g. on GNU/Linux it is `LD_LIBRARY_PATH').
+
+     Each search path must be a list of absolute directories separated
+     by `LT_PATHSEP_CHAR', for example, `"/usr/lib/mypkg:/lib/foo"'.
+     The directory names may not contain the path separator.
+
+     If the same module is loaded several times, the same handle is
+     returned.  If `lt_dlopen' fails for any reason, it returns `NULL'.
+
+ -- Function: lt_dlhandle lt_dlopenext (const char *FILENAME)
+     The same as `lt_dlopen', except that it tries to append different
+     file name extensions to the file name.  If the file with the file
+     name FILENAME cannot be found libltdl tries to append the
+     following extensions:
+
+       1. the libtool archive extension `.la'
+
+       2. the extension used for native dynamically loadable modules on
+          the host platform, e.g., `.so', `.sl', etc.
+
+     This lookup strategy was designed to allow programs that don't
+     have knowledge about native dynamic libraries naming conventions
+     to be able to `dlopen' such libraries as well as libtool modules
+     transparently.
+
+ -- Function: lt_dlhandle lt_dlopenadvise (const char *FILENAME,
+          lt_dladvise ADVISE)
+     The same as `lt_dlopen', except that it also requires an additional
+     argument which may contain additional hints to the underlying
+     system module loader.  The ADVISE parameter is opaque and can only
+     be accessed with the functions documented below.
+
+     Note that this function does not change the content of ADVISE, so
+     unlike the other calls in this API takes a direct `lt_dladvise'
+     type, and not a pointer to the same.
+
+ -- Function: int lt_dladvise_init (lt_dladvise *ADVISE)
+     The ADVISE parameter can be used to pass hints to the module
+     loader when using `lt_dlopenadvise' to perform the loading.  The
+     ADVISE parameter needs to be initialised by this function before
+     it can be used.  Any memory used by ADVISE needs to be recycled
+     with `lt_dladvise_destroy' when it is no longer needed.
+
+     On failure, `lt_dladvise_init' returns non-zero and sets an error
+     message that can be retrieved with `lt_dlerror'.
+
+ -- Function: int lt_dladvise_destroy (lt_dladvise *ADVISE)
+     Recycle the memory used by ADVISE.  For an example, see the
+     documentation for `lt_dladvise_ext'.
+
+     On failure, `lt_dladvise_destroy' returns non-zero and sets an
+     error message that can be retrieved with `lt_dlerror'.
+
+ -- Function: int lt_dladvise_ext (lt_dladvise *ADVISE)
+     Set the `ext' hint on ADVISE.  Passing an ADVISE parameter to
+     `lt_dlopenadvise' with this hint set causes it to try to append
+     different file name extensions like `lt_dlopenext'.
+
+     The following example is equivalent to calling `lt_dlopenext
+     (filename)':
+
+          lt_dlhandle
+          my_dlopenext (const char *filename)
+          {
+            lt_dlhandle handle = 0;
+            lt_dladvise advise;
+
+            if (!lt_dladvise_init (&advise) && !lt_dladvise_ext (&advise))
+              handle = lt_dlopenadvise (filename, advise);
+
+            lt_dladvise_destroy (&advise);
+
+            return handle;
+          }
+
+     On failure, `lt_dladvise_ext' returns non-zero and sets an error
+     message that can be retrieved with `lt_dlerror'.
+
+ -- Function: int lt_dladvise_global (lt_dladvise *ADVISE)
+     Set the `symglobal' hint on ADVISE.  Passing an ADVISE parameter
+     to `lt_dlopenadvise' with this hint set causes it to try to make
+     the loaded module's symbols globally available for resolving
+     unresolved symbols in subsequently loaded modules.
+
+     If neither the `symglobal' nor the `symlocal' hints are set, or if
+     a module is loaded without using the `lt_dlopenadvise' call in any
+     case, then the visibility of the module's symbols will be as per
+     the default for the underlying module loader and OS.  Even if a
+     suitable hint is passed, not all loaders are able to act upon it in
+     which case `lt_dlgetinfo' will reveal whether the hint was actually
+     followed.
+
+     On failure, `lt_dladvise_global' returns non-zero and sets an error
+     message that can be retrieved with `lt_dlerror'.
+
+ -- Function: int lt_dladvise_local (lt_dladvise *ADVISE)
+     Set the `symlocal' hint on ADVISE.  Passing an ADVISE parameter to
+     `lt_dlopenadvise' with this hint set causes it to try to keep the
+     loaded module's symbols hidden so that they are not visible to
+     subsequently loaded modules.
+
+     If neither the `symglobal' nor the `symlocal' hints are set, or if
+     a module is loaded without using the `lt_dlopenadvise' call in any
+     case, then the visibility of the module's symbols will be as per
+     the default for the underlying module loader and OS.  Even if a
+     suitable hint is passed, not all loaders are able to act upon it in
+     which case `lt_dlgetinfo' will reveal whether the hint was actually
+     followed.
+
+     On failure, `lt_dladvise_local' returns non-zero and sets an error
+     message that can be retrieved with `lt_dlerror'.
+
+ -- Function: int lt_dladvise_resident (lt_dladvise *ADVISE)
+     Set the `resident' hint on ADVISE.  Passing an ADVISE parameter to
+     `lt_dlopenadvise' with this hint set causes it to try to make the
+     loaded module resident in memory, so that it cannot be unloaded
+     with a later call to `lt_dlclose'.
+
+     On failure, `lt_dladvise_resident' returns non-zero and sets an
+     error message that can be retrieved with `lt_dlerror'.
+
+ -- Function: int lt_dladvise_preload (lt_dladvise *ADVISE)
+     Set the `preload' hint on ADVISE.  Passing an ADVISE parameter to
+     `lt_dlopenadvise' with this hint set causes it to load only
+     preloaded modules, so that if a suitable preloaded module is not
+     found, `lt_dlopenadvise' will return `NULL'.
+
+ -- Function: int lt_dlclose (lt_dlhandle HANDLE)
+     Decrement the reference count on the module HANDLE.  If it drops
+     to zero and no other module depends on this module, then the
+     module is unloaded.  Return 0 on success.
+
+ -- Function: void * lt_dlsym (lt_dlhandle HANDLE, const char *NAME)
+     Return the address in the module HANDLE, where the symbol given by
+     the null-terminated string NAME is loaded.  If the symbol cannot
+     be found, `NULL' is returned.
+
+ -- Function: const char * lt_dlerror (void)
+     Return a human readable string describing the most recent error
+     that occurred from any of libltdl's functions.  Return `NULL' if
+     no errors have occurred since initialization or since it was last
+     called.
+
+ -- Function: int lt_dladdsearchdir (const char *SEARCH_DIR)
+     Append the search directory SEARCH_DIR to the current user-defined
+     library search path.  Return 0 on success.
+
+ -- Function: int lt_dlinsertsearchdir (const char *BEFORE,
+          const char *SEARCH_DIR)
+     Insert the search directory SEARCH_DIR into the user-defined
+     library search path, immediately before the element starting at
+     address BEFORE.  If BEFORE is `NULL', then SEARCH_DIR is appending
+     as if `lt_dladdsearchdir' had been called.  Return 0 on success.
+
+ -- Function: int lt_dlsetsearchpath (const char *SEARCH_PATH)
+     Replace the current user-defined library search path with
+     SEARCH_PATH, which must be a list of absolute directories separated
+     by `LT_PATHSEP_CHAR'.  Return 0 on success.
+
+ -- Function: const char * lt_dlgetsearchpath (void)
+     Return the current user-defined library search path.
+
+ -- Function: int lt_dlforeachfile (const char *SEARCH_PATH,
+          int (*FUNC) (const char *FILENAME, void * DATA), void * DATA)
+     In some applications you may not want to load individual modules
+     with known names, but rather find all of the modules in a set of
+     directories and load them all during initialisation.  With this
+     function you can have libltdl scan the `LT_PATHSEP_CHAR'-delimited
+     directory list in SEARCH_PATH for candidates, and pass them, along
+     with DATA to your own callback function, FUNC.  If SEARCH_PATH is
+     `NULL', then search all of the standard locations that `lt_dlopen'
+     would examine.  This function will continue to make calls to FUNC
+     for each file that it discovers in SEARCH_PATH until one of these
+     calls returns non-zero, or until the files are exhausted.
+     `lt_dlforeachfile' returns the value returned by the last call
+     made to FUNC.
+
+     For example you could define FUNC to build an ordered "argv"-like
+     vector of files using DATA to hold the address of the start of the
+     vector.
+
+ -- Function: int lt_dlmakeresident (lt_dlhandle HANDLE)
+     Mark a module so that it cannot be `lt_dlclose'd.  This can be
+     useful if a module implements some core functionality in your
+     project that would cause your code to crash if removed.  Return 0
+     on success.
+
+     If you use `lt_dlopen (NULL)' to get a HANDLE for the running
+     binary, that handle will always be marked as resident, and
+     consequently cannot be successfully `lt_dlclose'd.
+
+ -- Function: int lt_dlisresident (lt_dlhandle HANDLE)
+     Check whether a particular module has been marked as resident,
+     returning 1 if it has or 0 otherwise.  If there is an error while
+     executing this function, return -1 and set an error message for
+     retrieval with `lt_dlerror'.
+
+   ---------- Footnotes ----------
+
+   (1) Some platforms, notably Mac OS X, differentiate between a
+runtime library that cannot be opened by `lt_dlopen' and a dynamic
+module that can.  For maximum portability you should try to ensure that
+you only pass `lt_dlopen' objects that have been compiled with libtool's
+`-module' flag.
+
+
+File: libtool.info,  Node: Modules for libltdl,  Next: Thread Safety in libltdl,  Prev: Libltdl interface,  Up: Using libltdl
+
+11.2 Creating modules that can be `dlopen'ed
+============================================
+
+Libtool modules are created like normal libtool libraries with a few
+exceptions:
+
+   You have to link the module with libtool's `-module' switch, and you
+should link any program that is intended to dlopen the module with
+`-dlopen MODULENAME.LA' where possible, so that libtool can dlpreopen
+the module on platforms that do not support dlopening.  If the module
+depends on any other libraries, make sure you specify them either when
+you link the module or when you link programs that dlopen it.  If you
+want to disable versioning (*note Versioning::) for a specific module
+you should link it with the `-avoid-version' switch.  Note that libtool
+modules don't need to have a "lib" prefix.  However, Automake 1.4 or
+higher is required to build such modules.
+
+   Usually a set of modules provide the same interface, i.e. exports
+the same symbols, so that a program can dlopen them without having to
+know more about their internals: In order to avoid symbol conflicts all
+exported symbols must be prefixed with "modulename_LTX_" (MODULENAME is
+the name of the module).  Internal symbols must be named in such a way
+that they won't conflict with other modules, for example, by prefixing
+them with "_modulename_".  Although some platforms support having the
+same symbols defined more than once it is generally not portable and it
+makes it impossible to dlpreopen such modules.
+
+   libltdl will automatically cut the prefix off to get the real name of
+the symbol.  Additionally, it supports modules that do not use a prefix
+so that you can also dlopen non-libtool modules.
+
+   `foo1.c' gives an example of a portable libtool module.  Exported
+symbols are prefixed with "foo1_LTX_", internal symbols with "_foo1_".
+Aliases are defined at the beginning so that the code is more readable.
+
+     /* aliases for the exported symbols */
+     #define foo  foo1_LTX_foo
+     #define bar  foo1_LTX_bar
+
+     /* a global variable definition */
+     int bar = 1;
+
+     /* a private function */
+     int _foo1_helper() {
+       return bar;
+     }
+
+     /* an exported function */
+     int foo() {
+       return _foo1_helper();
+     }
+
+The `Makefile.am' contains the necessary rules to build the module
+`foo1.la':
+
+     ...
+     lib_LTLIBRARIES = foo1.la
+
+     foo1_la_SOURCES = foo1.c
+     foo1_la_LDFLAGS = -module
+     ...
+
+
+File: libtool.info,  Node: Thread Safety in libltdl,  Next: User defined module data,  Prev: Modules for libltdl,  Up: Using libltdl
+
+11.3 Using libltdl in a multi threaded environment
+==================================================
+
+Libltdl provides a wrapper around whatever dynamic run-time object
+loading mechanisms are provided by the host system, many of which are
+themselves not thread safe.  Consequently libltdl cannot itself be
+consistently thread safe.
+
+   If you wish to use libltdl in a multithreaded environment, then you
+must mutex lock around libltdl calls, since they may in turn be calling
+non-thread-safe system calls on some target hosts.
+
+   Some old releases of libtool provided a mutex locking API that was
+unusable with POSIX threads, so callers were forced to lock around all
+libltdl API calls anyway.  That mutex locking API was next to useless,
+and is not present in current releases.
+
+   Some future release of libtool may provide a new POSIX thread
+compliant mutex locking API.
+
+
+File: libtool.info,  Node: User defined module data,  Next: Module loaders for libltdl,  Prev: Thread Safety in libltdl,  Up: Using libltdl
+
+11.4 Data associated with loaded modules
+========================================
+
+Some of the internal information about each loaded module that is
+maintained by libltdl is available to the user, in the form of this
+structure:
+
+ -- Type: struct lt_dlinfo { char *FILENAME; char *NAME; int REF_COUNT;
+          int IS_RESIDENT; int IS_SYMGLOBAL; int IS_SYMLOCAL;}
+     `lt_dlinfo' is used to store information about a module.  The
+     FILENAME attribute is a null-terminated character string of the
+     real module file name.  If the module is a libtool module then
+     NAME is its module name (e.g. `"libfoo"' for `"dir/libfoo.la"'),
+     otherwise it is set to `NULL'.  The REF_COUNT attribute is a
+     reference counter that describes how often the same module is
+     currently loaded. The remaining fields can be compared to any
+     hints that were passed to `lt_dlopenadvise' to determine whether
+     the underlying loader was able to follow them.
+
+   The following function will return a pointer to libltdl's internal
+copy of this structure for the given HANDLE:
+
+ -- Function: const lt_dlinfo * lt_dlgetinfo (lt_dlhandle HANDLE)
+     Return a pointer to a struct that contains some information about
+     the module HANDLE.  The contents of the struct must not be
+     modified.  Return `NULL' on failure.
+
+   Furthermore, in order to save you from having to keep a list of the
+handles of all the modules you have loaded, these functions allow you to
+iterate over libltdl's list of loaded modules:
+
+ -- Type: lt_dlinterface_id
+     The opaque type used to hold the module interface details for each
+     registered libltdl client.
+
+ -- Type: int lt_dlhandle_interface (lt_dlhandle HANDLE,
+          const char *ID_STRING)
+     Functions of this type are called to check that a handle conforms
+     to a library's expected module interface when iterating over the
+     global handle list.  You should be careful to write a callback
+     function of this type that can correctly identify modules that
+     belong to this client, both to prevent other clients from
+     accidentally finding your loaded modules with the iterator
+     functions below, and vice versa.  The best way to do this is to
+     check that module HANDLE conforms to the interface specification
+     of your loader using `lt_dlsym'.
+
+     The callback may be given *every* module loaded by all the libltdl
+     module clients in the current address space, including any modules
+     loaded by other libraries such as libltdl itself, and should
+     return non-zero if that module does not fulfill the interface
+     requirements of your loader.
+
+          int
+          my_interface_cb (lt_dlhandle handle, const char *id_string)
+          {
+            char *(*module_id) (void) = NULL;
+
+            /* A valid my_module must provide all of these symbols.  */
+            if (!((module_id = (char*(*)(void)) lt_dlsym ("module_version"))
+                  && lt_dlsym ("my_module_entrypoint")))
+                return 1;
+
+            if (strcmp (id_string, module_id()) != 0)
+                return 1;
+
+            return 0;
+          }
+
+ -- Function: lt_dlinterface_id lt_dlinterface_register
+          (const char *ID_STRING, lt_dlhandle_interface *IFACE)
+     Use this function to register your interface validator with
+     libltdl, and in return obtain a unique key to store and retrieve
+     per-module data.  You supply an ID_STRING and IFACE so that the
+     resulting `lt_dlinterface_id' can be used to filter the module
+     handles returned by the iteration functions below.  If IFACE is
+     `NULL', all modules will be matched.
+
+ -- Function: void lt_dlinterface_free (lt_dlinterface_id IFACE)
+     Release the data associated with IFACE.
+
+ -- Function: int lt_dlhandle_map (lt_dlinterface_id IFACE,
+          int (*FUNC) (lt_dlhandle HANDLE, void * DATA), void * DATA)
+     For each module that matches IFACE, call the function FUNC.  When
+     writing the FUNC callback function, the argument HANDLE is the
+     handle of a loaded module, and DATA is the last argument passed to
+     `lt_dlhandle_map'. As soon as FUNC returns a non-zero value for
+     one of the handles, `lt_dlhandle_map' will stop calling FUNC and
+     immediately return that non-zero value.  Otherwise 0 is eventually
+     returned when FUNC has been successfully called for all matching
+     modules.
+
+ -- Function: lt_dlhandle lt_dlhandle_iterate
+          (lt_dlinterface_id  IFACE, lt_dlhandle PLACE)
+     Iterate over the module handles loaded by IFACE, returning the
+     first matching handle in the list if PLACE is `NULL', and the next
+     one on subsequent calls.  If PLACE is the last element in the list
+     of eligible modules, this function returns `NULL'.
+
+          lt_dlhandle handle = 0;
+          lt_dlinterface_id iface = my_interface_id;
+
+          while ((handle = lt_dlhandle_iterate (iface, handle)))
+            {
+              ...
+            }
+
+ -- Function: lt_dlhandle lt_dlhandle_fetch (lt_dlinterface_id IFACE,
+          const char *MODULE_NAME)
+     Search through the module handles loaded by IFACE for a module
+     named MODULE_NAME, returning its handle if found or else `NULL' if
+     no such named module has been loaded by IFACE.
+
+   However, you might still need to maintain your own list of loaded
+module handles (in parallel with the list maintained inside libltdl) if
+there were any other data that your application wanted to associate
+with each open module.  Instead, you can use the following API calls to
+do that for you.  You must first obtain a unique interface id from
+libltdl as described above, and subsequently always use it to retrieve
+the data you stored earlier.  This allows different libraries to each
+store their own data against loaded modules, without interfering with
+one another.
+
+ -- Function: void * lt_dlcaller_set_data (lt_dlinterface_id KEY,
+          lt_dlhandle HANDLE, void * DATA)
+     Set DATA as the set of data uniquely associated with KEY and
+     HANDLE for later retrieval.  This function returns the DATA
+     previously associated with KEY and HANDLE if any.  A result of 0,
+     may indicate that a diagnostic for the last error (if any) is
+     available from `lt_dlerror()'.
+
+     For example, to correctly remove some associated data:
+
+          void *stale = lt_dlcaller_set_data (key, handle, 0);
+          if (stale != NULL)
+            {
+              free (stale);
+            }
+          else
+            {
+              char *error_msg = lt_dlerror ();
+
+              if (error_msg != NULL)
+                {
+                  my_error_handler (error_msg);
+                  return STATUS_FAILED;
+                }
+            }
+
+ -- Function: void * lt_dlcaller_get_data (lt_dlinterface_id KEY,
+          lt_dlhandle HANDLE)
+     Return the address of the data associated with KEY and HANDLE, or
+     else `NULL' if there is none.
+
+   Old versions of libltdl also provided a simpler, but similar, API
+based around `lt_dlcaller_id'.  Unfortunately, it had no provision for
+detecting whether a module belonged to a particular interface as
+libltdl didn't support multiple loaders in the same address space at
+that time.  Those APIs are no longer supported as there would be no way
+to stop clients of the old APIs from seeing (and accidentally altering)
+modules loaded by other libraries.
+
+
+File: libtool.info,  Node: Module loaders for libltdl,  Next: Distributing libltdl,  Prev: User defined module data,  Up: Using libltdl
+
+11.5 How to create and register new module loaders
+==================================================
+
+Sometimes libltdl's many ways of gaining access to modules are not
+sufficient for the purposes of a project.  You can write your own
+loader, and register it with libltdl so that `lt_dlopen' will be able
+to use it.
+
+   Writing a loader involves writing at least three functions that can
+be called by `lt_dlopen', `lt_dlsym' and `lt_dlclose'.  Optionally, you
+can provide a finalisation function to perform any cleanup operations
+when `lt_dlexit' executes, and a symbol prefix string that will be
+prepended to any symbols passed to `lt_dlsym'.  These functions must
+match the function pointer types below, after which they can be
+allocated to an instance of `lt_user_dlloader' and registered.
+
+   Registering the loader requires that you choose a name for it, so
+that it can be recognised by `lt_dlloader_find' and removed with
+`lt_dlloader_remove'.  The name you choose must be unique, and not
+already in use by libltdl's builtin loaders:
+
+"dlopen"
+     The system dynamic library loader, if one exists.
+
+"dld"
+     The GNU dld loader, if `libdld' was installed when libltdl was
+     built.
+
+"dlpreload"
+     The loader for `lt_dlopen'ing of preloaded static modules.
+
+   The prefix "dl" is reserved for loaders supplied with future
+versions of libltdl, so you should not use that for your own loader
+names.
+
+The following types are defined in `ltdl.h':
+
+ -- Type: lt_module
+     `lt_module' is a dlloader dependent module.  The dynamic module
+     loader extensions communicate using these low level types.
+
+ -- Type: lt_dlloader
+     `lt_dlloader' is a handle for module loader types.
+
+ -- Type: lt_user_data
+     `lt_user_data' is used for specifying loader instance data.
+
+ -- Type: struct lt_user_dlloader {const char *SYM_PREFIX;
+          lt_module_open *MODULE_OPEN; lt_module_close *MODULE_CLOSE;
+          lt_find_sym *FIND_SYM; lt_dlloader_exit *DLLOADER_EXIT; }
+     If you want to define a new way to open dynamic modules, and have
+     the `lt_dlopen' API use it, you need to instantiate one of these
+     structures and pass it to `lt_dlloader_add'.  You can pass whatever
+     you like in the DLLOADER_DATA field, and it will be passed back as
+     the value of the first parameter to each of the functions
+     specified in the function pointer fields.
+
+ -- Type: lt_module lt_module_open (const char *FILENAME)
+     The type of the loader function for an `lt_dlloader' module
+     loader.  The value set in the dlloader_data field of the `struct
+     lt_user_dlloader' structure will be passed into this function in
+     the LOADER_DATA parameter.  Implementation of such a function
+     should attempt to load the named module, and return an `lt_module'
+     suitable for passing in to the associated `lt_module_close' and
+     `lt_sym_find' function pointers.  If the function fails it should
+     return `NULL', and set the error message with `lt_dlseterror'.
+
+ -- Type: int lt_module_close (lt_user_data LOADER_DATA,
+          lt_module MODULE)
+     The type of the unloader function for a user defined module loader.
+     Implementation of such a function should attempt to release any
+     resources tied up by the MODULE module, and then unload it from
+     memory.  If the function fails for some reason, set the error
+     message with `lt_dlseterror' and return non-zero.
+
+ -- Type: void * lt_find_sym (lt_module MODULE, const char *SYMBOL)
+     The type of the symbol lookup function for a user defined module
+     loader.  Implementation of such a function should return the
+     address of the named SYMBOL in the module MODULE, or else set the
+     error message with `lt_dlseterror' and return `NULL' if lookup
+     fails.
+
+ -- Type: int lt_dlloader_exit (lt_user_data LOADER_DATA)
+     The type of the finalisation function for a user defined module
+     loader.  Implementation of such a function should free any
+     resources associated with the loader, including any user specified
+     data in the `dlloader_data' field of the `lt_user_dlloader'.  If
+     non-`NULL', the function will be called by `lt_dlexit', and
+     `lt_dlloader_remove'.
+
+   For example:
+
+     int
+     register_myloader (void)
+     {
+       lt_user_dlloader dlloader;
+
+       /* User modules are responsible for their own initialisation. */
+       if (myloader_init () != 0)
+         return MYLOADER_INIT_ERROR;
+
+       dlloader.sym_prefix    = NULL;
+       dlloader.module_open   = myloader_open;
+       dlloader.module_close  = myloader_close;
+       dlloader.find_sym      = myloader_find_sym;
+       dlloader.dlloader_exit = myloader_exit;
+       dlloader.dlloader_data = (lt_user_data)myloader_function;
+
+       /* Add my loader as the default module loader. */
+       if (lt_dlloader_add (lt_dlloader_next (NULL), &dlloader,
+                            "myloader") != 0)
+         return ERROR;
+
+       return OK;
+     }
+
+   Note that if there is any initialisation required for the loader, it
+must be performed manually before the loader is registered - libltdl
+doesn't handle user loader initialisation.
+
+   Finalisation _is_ handled by libltdl however, and it is important to
+ensure the `dlloader_exit' callback releases any resources claimed
+during the initialisation phase.
+
+libltdl provides the following functions for writing your own module
+loaders:
+
+ -- Function: int lt_dlloader_add (lt_dlloader *PLACE,
+          lt_user_dlloader *DLLOADER, const char *LOADER_NAME)
+     Add a new module loader to the list of all loaders, either as the
+     last loader (if PLACE is `NULL'), else immediately before the
+     loader passed as PLACE.  LOADER_NAME will be returned by
+     `lt_dlloader_name' if it is subsequently passed a newly registered
+     loader.  These LOADER_NAMEs must be unique, or
+     `lt_dlloader_remove' and `lt_dlloader_find' cannot work.  Returns
+     0 for success.
+
+          /* Make myloader be the last one. */
+          if (lt_dlloader_add (NULL, myloader) != 0)
+            perror (lt_dlerror ());
+
+ -- Function: int lt_dlloader_remove (const char *LOADER_NAME)
+     Remove the loader identified by the unique name, LOADER_NAME.
+     Before this can succeed, all modules opened by the named loader
+     must have been closed.  Returns 0 for success, otherwise an error
+     message can be obtained from `lt_dlerror'.
+
+          /* Remove myloader. */
+          if (lt_dlloader_remove ("myloader") != 0)
+            perror (lt_dlerror ());
+
+ -- Function: lt_dlloader * lt_dlloader_next (lt_dlloader *PLACE)
+     Iterate over the module loaders, returning the first loader if
+     PLACE is `NULL', and the next one on subsequent calls.  The handle
+     is for use with `lt_dlloader_add'.
+
+          /* Make myloader be the first one. */
+          if (lt_dlloader_add (lt_dlloader_next (NULL), myloader) != 0)
+            return ERROR;
+
+ -- Function: lt_dlloader * lt_dlloader_find (const char *LOADER_NAME)
+     Return the first loader with a matching LOADER_NAME identifier, or
+     else `NULL', if the identifier is not found.
+
+     The identifiers that may be used by libltdl itself, if the host
+     architecture supports them are "dlopen"(1), "dld" and "dlpreload".
+
+          /* Add a user loader as the next module loader to be tried if
+             the standard dlopen loader were to fail when lt_dlopening. */
+          if (lt_dlloader_add (lt_dlloader_find ("dlopen"), myloader) != 0)
+            return ERROR;
+
+ -- Function: const char * lt_dlloader_name (lt_dlloader *PLACE)
+     Return the identifying name of PLACE, as obtained from
+     `lt_dlloader_next' or `lt_dlloader_find'.  If this function fails,
+     it will return `NULL' and set an error for retrieval with
+     `lt_dlerror'.
+
+ -- Function: lt_user_data * lt_dlloader_data (lt_dlloader *PLACE)
+     Return the address of the `dlloader_data' of PLACE, as obtained
+     from `lt_dlloader_next' or `lt_dlloader_find'.  If this function
+     fails, it will return `NULL' and set an error for retrieval with
+     `lt_dlerror'.
+
+11.5.1 Error handling within user module loaders
+------------------------------------------------
+
+ -- Function: int lt_dladderror (const char *DIAGNOSTIC)
+     This function allows you to integrate your own error messages into
+     `lt_dlerror'.  Pass in a suitable diagnostic message for return by
+     `lt_dlerror', and an error identifier for use with `lt_dlseterror'
+     is returned.
+
+     If the allocation of an identifier fails, this function returns -1.
+
+          int myerror = lt_dladderror ("Doh!");
+          if (myerror < 0)
+            perror (lt_dlerror ());
+
+ -- Function: int lt_dlseterror (int ERRORCODE)
+     When writing your own module loaders, you should use this function
+     to raise errors so that they are propagated through the
+     `lt_dlerror' interface.  All of the standard errors used by
+     libltdl are declared in `ltdl.h', or you can add more of your own
+     with `lt_dladderror'.  This function returns 0 on success.
+
+          if (lt_dlseterror (LTDL_ERROR_NO_MEMORY) != 0)
+            perror (lt_dlerror ());
+
+---------- Footnotes ----------
+
+   (1) This is used for the host dependent module loading API -
+`shl_load' and `LoadLibrary' for example
+
+
+File: libtool.info,  Node: Distributing libltdl,  Prev: Module loaders for libltdl,  Up: Using libltdl
+
+11.6 How to distribute libltdl with your package
+================================================
+
+Even though libltdl is installed together with libtool, you may wish to
+include libltdl in the distribution of your package, for the
+convenience of users of your package that don't have libtool or libltdl
+installed, or if you are using features of a very new version of
+libltdl that you don't expect your users to have yet.  In such cases,
+you must decide which flavor of libltdl you want to use: a convenience
+library or an installable libtool library.
+
+   The most simplistic way to add `libltdl' to your package is to copy
+all the `libltdl' source files to a subdirectory within your package
+and to build and link them along with the rest of your sources.  To
+help you do this, the m4 macros for Autoconf are available in
+`ltdl.m4'.  You must ensure that they are available in `aclocal.m4'
+before you run Autoconf(1).  Having made the macros available, you must
+add a call to the `LTDL_INIT' macro (after the call to `LT_INIT') to
+your package's `configure.ac' to perform the configure time checks
+required to build the library correctly.  Unfortunately, this method
+has problems if you then try to link the package binaries with an
+installed libltdl, or a library that depends on libltdl, because of the
+duplicate symbol definitions.  For example, ultimately linking against
+two different versions of libltdl, or against both a local convenience
+library and an installed libltdl is bad.  Ensuring that only one copy
+of the libltdl sources are linked into any program is left as an
+exercise for the reader.
+
+ -- Macro: LT_CONFIG_LTDL_DIR (DIRECTORY)
+     Declare DIRECTORY to be the location of the `libltdl' source
+     files, for `libtoolize --ltdl' to place them. *Note Invoking
+     libtoolize::, for more details.  Provided that you add an
+     appropriate `LT_CONFIG_LTDL_DIR' call in your `configure.ac'
+     before calling `libtoolize', the appropriate `libltdl' files will
+     be installed automatically.
+
+ -- Macro: LTDL_INIT (OPTIONS)
+ -- Macro: LT_WITH_LTDL
+ -- Macro: AC_WITH_LTDL
+     `AC_WITH_LTDL' and `LT_WITH_LTDL' are deprecated names for older
+     versions of this macro; `autoupdate' will update your
+     `configure.ac' file.
+
+     This macro adds the following options to the `configure' script:
+
+    `--with-ltdl-include INSTALLED-LTDL-HEADER-DIR'
+          The `LTDL_INIT' macro will look in the standard header file
+          locations to find the installed `libltdl' headers.  If
+          `LTDL_INIT' can't find them by itself, the person who builds
+          your package can use this option to tell `configure' where
+          the installed `libltdl' headers are.
+
+    `--with-ltdl-lib INSTALLED-LTDL-LIBRARY-DIR'
+          Similarly, the person building your package can use this
+          option to help `configure' find the installed `libltdl.la'.
+
+    `--with-included-ltdl'
+          If there is no installed `libltdl', or in any case if the
+          person building your package would rather use the `libltdl'
+          sources shipped with the package in the subdirectory named by
+          `LT_CONFIG_LTDL_DIR', they should pass this option to
+          `configure'.
+
+     If the `--with-included-ltdl' is not passed at configure time, and
+     an installed `libltdl' is not found(2), then `configure' will exit
+     immediately with an error that asks the user to either specify the
+     location of an installed `libltdl' using the `--with-ltdl-include'
+     and `--with-ltdl-lib' options, or to build with the `libltdl'
+     sources shipped with the package by passing `--with-included-ltdl'.
+
+     If an installed `libltdl' is found, then `LIBLTDL' is set to the
+     link flags needed to use it, and `LTDLINCL' to the preprocessor
+     flags needed to find the installed headers, and `LTDLDEPS' will be
+     empty.  Note, however, that no version checking is performed.  You
+     should manually check for the `libltdl' features you need in
+     `configure.ac':
+
+          LT_INIT([dlopen])
+          LTDL_INIT
+
+          # The lt_dladvise_init symbol was added with libtool-2.2
+          if test "x$with_included_ltdl" != "xyes"; then
+            save_CFLAGS="$CFLAGS"
+            save_LDFLAGS="$LDFLAGS"
+            CFLAGS="$CFLAGS $LTDLINCL"
+            LDFLAGS="$LDFLAGS $LIBLTDL"
+            AC_CHECK_LIB([ltdl], [lt_dladvise_init],
+                          [],
+                  [AC_MSG_ERROR([installed libltdl is too old])])
+            LDFLAGS="$save_LDFLAGS"
+            CFLAGS="$save_CFLAGS"
+          fi
+
+     OPTIONS may include no more than one of the following build modes
+     depending on how you want your project to build `libltdl':
+     `nonrecursive', `recursive', or `subproject'.  In order for
+     `libtoolize' to detect this option correctly, if you supply one of
+     these arguments, they must be given literally (i.e., macros or
+     shell variables that expand to the correct ltdl mode will not
+     work).
+
+    `nonrecursive'
+          This is how the Libtool project distribution builds the
+          `libltdl' we ship and install.  If you wish to use Automake
+          to build `libltdl' without invoking a recursive make to
+          descend into the `libltdl' subdirectory, then use this
+          option.  You will need to set your configuration up carefully
+          to make this work properly, and you will need releases of
+          Autoconf and Automake that support `subdir-objects' and
+          `LIBOBJDIR' properly.  In your `configure.ac', add:
+
+               AM_INIT_AUTOMAKE([subdir-objects])
+               AC_CONFIG_HEADERS([config.h])
+               LT_CONFIG_LTDL_DIR([libltdl])
+               LT_INIT([dlopen])
+               LTDL_INIT([nonrecursive])
+
+          You _have to_ use a config header, but it may have a name
+          different than `config.h'.
+
+          Also, add the following near the top of your `Makefile.am':
+
+               AM_CPPFLAGS =
+               AM_LDFLAGS =
+
+               BUILT_SOURCES =
+               EXTRA_DIST =
+               CLEANFILES =
+               MOSTLYCLEANFILES =
+
+               include_HEADERS =
+               noinst_LTLIBRARIES =
+               lib_LTLIBRARIES =
+               EXTRA_LTLIBRARIES =
+
+               include libltdl/Makefile.inc
+
+          Unless you build no other libraries from this `Makefile.am',
+          you will also need to change `lib_LTLIBRARIES' to assign with
+          `+=' so that the `libltdl' targets declared in `Makefile.inc'
+          are not overwritten.
+
+    `recursive'
+          This build mode still requires that you use Automake, but (in
+          contrast with `nonrecursive') uses the more usual device of
+          starting another `make' process in the `libltdl'
+          subdirectory.  To use this mode, you should add to your
+          `configure.ac':
+
+               AM_INIT_AUTOMAKE
+               AC_CONFIG_HEADERS([config.h])
+               LT_CONFIG_LTDL_DIR([libltdl])
+               LT_INIT([dlopen])
+               LTDL_INIT([recursive])
+               AC_CONFIG_FILES([libltdl/Makefile])
+
+          Again, you _have to_ use a config header, but it may have a
+          name different than `config.h' if you like.
+
+          Also, add this to your `Makefile.am':
+
+               SUBDIRS = libltdl
+
+    `subproject'
+          This mode is the default unless you explicitly add
+          `recursive' or `nonrecursive' to your `LTDL_INIT' options;
+          `subproject' is the only mode supported by previous releases
+          of libltdl.  Even if you do not use Autoconf in the parent
+          project, then, in `subproject' mode, still `libltdl' contains
+          all the necessary files to configure and build itself - you
+          just need to arrange for your build system to call
+          `libltdl/configure' with appropriate options, and then run
+          `make' in the `libltdl' subdirectory.
+
+          If you _are_ using Autoconf and Automake, then you will need
+          to add the following to your `configure.ac':
+
+               LT_CONFIG_LTDL_DIR([libltdl])
+               LTDL_INIT
+
+          and to `Makefile.am':
+
+               SUBDIRS = libltdl
+
+     Aside from setting the libltdl build mode, there are other keywords
+     that you can pass to `LTDL_INIT' to modify its behavior when
+     `--with-included-ltdl' has been given:
+
+    `convenience'
+          This is the default unless you explicitly add `installable' to
+          your `LTDL_INIT' options.
+
+          This keyword will cause options to be passed to the
+          `configure' script in the subdirectory named by
+          `LT_CONFIG_LTDL_DIR' in order to cause it to be built as a
+          convenience library.  If you're not using automake, you will
+          need to define `top_build_prefix', `top_builddir', and
+          `top_srcdir' in your makefile so that `LIBLTDL', `LTDLDEPS',
+          and `LTDLINCL' expand correctly.
+
+          One advantage of the convenience library is that it is not
+          installed, so the fact that you use `libltdl' will not be
+          apparent to the user, and it won't overwrite a pre-installed
+          version of `libltdl' the system might already have in the
+          installation directory.  On the other hand, if you want to
+          upgrade `libltdl' for any reason (e.g. a bugfix) you'll have
+          to recompile your package instead of just replacing the
+          shared installed version of `libltdl'.  However, if your
+          programs or libraries are linked with other libraries that
+          use such a pre-installed version of `libltdl', you may get
+          linker errors or run-time crashes.  Another problem is that
+          you cannot link the convenience library into more than one
+          libtool library, then link a single program with those
+          libraries, because you may get duplicate symbols.  In general
+          you can safely use the convenience library in programs that
+          don't depend on other libraries that might use `libltdl' too.
+
+    `installable'
+          This keyword will pass options to the `configure' script in
+          the subdirectory named by `LT_CONFIG_LTDL_DIR' in order to
+          cause it to be built as an installable library.  If you're not
+          using automake, you will need to define `top_build_prefix',
+          `top_builddir' and `top_srcdir' in your makefile so that
+          `LIBLTDL', `LTDLDEPS', and `LTDLINCL' are expanded properly.
+
+          Be aware that you could overwrite another `libltdl' already
+          installed to the same directory if you use this option.
+
+   Whatever method you use, `LTDL_INIT' will define the shell variable
+`LIBLTDL' to the link flag that you should use to link with `libltdl',
+the shell variable `LTDLDEPS' to the files that can be used as a
+dependency in `Makefile' rules, and the shell variable `LTDLINCL' to
+the preprocessor flag that you should use to compile programs that
+include `ltdl.h'. So, when you want to link a program with libltdl, be
+it a convenience, installed or installable library, just use
+`$(LTDLINCL)' for preprocessing and compilation, and `$(LIBLTDL)' for
+linking.
+
+   * If your package is built using an installed version of `libltdl',
+     `LIBLTDL' will be set to the compiler flags needed to link against
+     the installed library, `LTDLDEPS' will be empty, and `LTDLINCL'
+     will be set to the compiler flags needed to find the `libltdl'
+     header files.
+
+   * If your package is built using the convenience libltdl, `LIBLTDL'
+     and `LTDLDEPS' will be the pathname for the convenience version of
+     libltdl (starting with `${top_builddir}/' or
+     `${top_build_prefix}') and `LTDLINCL' will be `-I' followed by the
+     directory that contains `ltdl.h' (starting with `${top_srcdir}/').
+
+   * If an installable version of the included `libltdl' is being
+     built, its pathname starting with `${top_builddir}/' or
+     `${top_build_prefix}', will be stored in `LIBLTDL' and `LTDLDEPS',
+     and `LTDLINCL' will be set just like in the case of convenience
+     library.
+
+   You should probably also use the `dlopen' option to `LT_INIT' in
+your `configure.ac', otherwise libtool will assume no dlopening
+mechanism is supported, and revert to dlpreopening, which is probably
+not what you want.  Avoid using the `-static', `-static-libtool-libs',
+or `-all-static' switches when linking programs with libltdl.  This
+will not work on all platforms, because the dlopening functions may not
+be available for static linking.
+
+   The following example shows you how to embed an installable libltdl
+in your package.  In order to use the convenience variant, just replace
+the `LTDL_INIT' option `installable' with `convenience'.  We assume
+that libltdl was embedded using `libtoolize --ltdl'.
+
+   configure.ac:
+     ...
+     # Name the subdirectory that contains libltdl sources
+     LT_CONFIG_LTDL_DIR([libltdl])
+
+     # Configure libtool with dlopen support if possible
+     LT_INIT([dlopen])
+
+     # Enable building of the installable libltdl library
+     LTDL_INIT([installable])
+     ...
+
+   Makefile.am:
+     ...
+     SUBDIRS = libltdl
+
+     AM_CPPFLAGS = $(LTDLINCL)
+
+     myprog_LDFLAGS = -export-dynamic
+     myprog_LDADD = $(LIBLTDL) -dlopen self -dlopen foo1.la
+     myprog_DEPENDENCIES = $(LTDLDEPS) foo1.la
+     ...
+
+ -- Macro: LTDL_INSTALLABLE
+ -- Macro: AC_LIBLTDL_INSTALLABLE
+     These macros are deprecated, the `installable' option to
+     `LTDL_INIT' should be used instead.
+
+ -- Macro: LTDL_CONVENIENCE
+ -- Macro: AC_LIBLTDL_CONVENIENCE
+     These macros are deprecated, the `convenience' option to
+     `LTDL_INIT' should be used instead.
+
+   ---------- Footnotes ----------
+
+   (1) We used to recommend adding the contents of `ltdl.m4' to
+`acinclude.m4', but with `aclocal' from a modern Automake (1.8 or
+newer) and this release of libltdl that is not only unnecessary but
+makes it easy to forget to upgrade `acinclude.m4' if you move to a
+different release of libltdl.
+
+   (2) Even if libltdl is installed, `LTDL_INIT' may fail to detect it
+if libltdl depends on symbols provided by libraries other than the C
+library.
+
+
+File: libtool.info,  Node: Trace interface,  Next: FAQ,  Prev: Using libltdl,  Up: Top
+
+12 Libtool's trace interface
+****************************
+
+This section describes macros whose sole purpose is to be traced using
+Autoconf's `--trace' option (*note The Autoconf Manual:
+(autoconf)autoconf Invocation.) to query the Libtool configuration of a
+project.  These macros are called by Libtool internals and should never
+be called by user code; they should only be traced.
+
+ -- Macro: LT_SUPPORTED_TAG (TAG)
+     This macro is called once for each language enabled in the
+     package.  Its only argument, TAG, is the tag-name corresponding to
+     the language (*note Tags::).
+
+     You can therefore retrieve the list of all tags enabled in a
+     project using the following command:
+          autoconf --trace 'LT_SUPPORTED_TAG:$1'
+
+
+File: libtool.info,  Node: FAQ,  Next: Troubleshooting,  Prev: Trace interface,  Up: Top
+
+13 Frequently Asked Questions about libtool
+*******************************************
+
+This chapter covers some questions that often come up on the mailing
+lists.
+
+* Menu:
+
+* Stripped link flags::         Dropped flags when creating a library
+
+
+File: libtool.info,  Node: Stripped link flags,  Up: FAQ
+
+13.1 Why does libtool strip link flags when creating a library?
+===============================================================
+
+When creating a shared library, but not when compiling or creating a
+program, `libtool' drops some flags from the command line provided by
+the user.  This is done because flags unknown to `libtool' may
+interfere with library creation or require additional support from
+`libtool', and because omitting flags is usually the conservative
+choice for a successful build.
+
+   If you encounter flags that you think are useful to pass, as a
+work-around you can prepend flags with `-Wc,' or `-Xcompiler ' to allow
+them to be passed through to the compiler driver (*note Link mode::).
+Another possibility is to add flags already to the compiler command at
+`configure' run time:
+
+     ./configure CC='gcc -m64'
+
+   If you think `libtool' should let some flag through by default,
+here's how you can test such an inclusion: grab the Libtool development
+tree, edit the `ltmain.m4sh' file in the `libltdl/config' subdirectory
+to pass through the flag (search for `Flags to be passed through'),
+re-bootstrap and build with the flags in question added to `LDFLAGS',
+`CFLAGS', `CXXFLAGS', etc. on the `configure' command line as
+appropriate.  Run the testsuite as described in the `README' file and
+report results to the Libtool bug reporting address
+<bug-libtool@gnu.org>.
+
+
+File: libtool.info,  Node: Troubleshooting,  Next: Maintaining,  Prev: FAQ,  Up: Top
+
+14 Troubleshooting
+******************
+
+Libtool is under constant development, changing to remain up-to-date
+with modern operating systems.  If libtool doesn't work the way you
+think it should on your platform, you should read this chapter to help
+determine what the problem is, and how to resolve it.
+
+* Menu:
+
+* Libtool test suite::          Libtool's self-tests.
+* Reporting bugs::              How to report problems with libtool.
+
+
+File: libtool.info,  Node: Libtool test suite,  Next: Reporting bugs,  Up: Troubleshooting
+
+14.1 The libtool test suite
+===========================
+
+Libtool comes with two integrated sets of tests to check that your build
+is sane, that test its capabilities, and report obvious bugs in the
+libtool program.  These tests, too, are constantly evolving, based on
+past problems with libtool, and known deficiencies in other operating
+systems.
+
+   As described in the `README' file, you may run `make -k check' after
+you have built libtool (possibly before you install it) in order to
+make sure that it meets basic functional requirements.
+
+* Menu:
+
+* Test descriptions::           The contents of the old test suite.
+* When tests fail::             What to do when a test fails.
+
+
+File: libtool.info,  Node: Test descriptions,  Next: When tests fail,  Up: Libtool test suite
+
+14.1.1 Description of test suite
+--------------------------------
+
+Here is a list of the current programs in the old test suite, and what
+they test for:
+
+`cdemo-conf.test'
+`cdemo-make.test'
+`cdemo-exec.test'
+`cdemo-static.test'
+`cdemo-static-make.test'
+`cdemo-static-exec.test'
+`cdemo-shared.test'
+`cdemo-shared-make.test'
+`cdemo-shared-exec.test'
+`cdemo-undef.test'
+`cdemo-undef-make.test'
+`cdemo-undef-exec.test'
+     These programs check to see that the `tests/cdemo' subdirectory of
+     the libtool distribution can be configured and built correctly.
+
+     The `tests/cdemo' subdirectory contains a demonstration of libtool
+     convenience libraries, a mechanism that allows build-time static
+     libraries to be created, in a way that their components can be
+     later linked into programs or other libraries, even shared ones.
+
+     The tests matching `cdemo-*make.test' and `cdemo-*exec.test' are
+     executed three times, under three different libtool configurations:
+     `cdemo-conf.test' configures `cdemo/libtool' to build both static
+     and shared libraries (the default for platforms that support
+     both), `cdemo-static.test' builds only static libraries
+     (`--disable-shared'), and `cdemo-shared.test' builds only shared
+     libraries (`--disable-static').
+
+     The test `cdemo-undef.test' tests the generation of shared
+     libraries with undefined symbols on systems that allow this.
+
+`demo-conf.test'
+`demo-make.test'
+`demo-exec.test'
+`demo-inst.test'
+`demo-unst.test'
+`demo-static.test'
+`demo-static-make.test'
+`demo-static-exec.test'
+`demo-static-inst.test'
+`demo-static-unst.test'
+`demo-shared.test'
+`demo-shared-make.test'
+`demo-shared-exec.test'
+`demo-shared-inst.test'
+`demo-shared-unst.test'
+`demo-nofast.test'
+`demo-nofast-make.test'
+`demo-nofast-exec.test'
+`demo-nofast-inst.test'
+`demo-nofast-unst.test'
+`demo-pic.test'
+`demo-pic-make.test'
+`demo-pic-exec.test'
+`demo-nopic.test'
+`demo-nopic-make.test'
+`demo-nopic-exec.test'
+     These programs check to see that the `tests/demo' subdirectory of
+     the libtool distribution can be configured, built, installed, and
+     uninstalled correctly.
+
+     The `tests/demo' subdirectory contains a demonstration of a trivial
+     package that uses libtool.  The tests matching `demo-*make.test',
+     `demo-*exec.test', `demo-*inst.test' and `demo-*unst.test' are
+     executed four times, under four different libtool configurations:
+     `demo-conf.test' configures `demo/libtool' to build both static
+     and shared libraries, `demo-static.test' builds only static
+     libraries (`--disable-shared'), and `demo-shared.test' builds only
+     shared libraries (`--disable-static').  `demo-nofast.test'
+     configures `demo/libtool' to disable the fast-install mode
+     (`--enable-fast-install=no').  `demo-pic.test' configures
+     `demo/libtool' to prefer building PIC code (`--with-pic'),
+     `demo-nopic.test' to prefer non-PIC code (`--without-pic').
+
+`demo-deplibs.test'
+     Many systems cannot link static libraries into shared libraries.
+     libtool uses a `deplibs_check_method' to prevent such cases.  This
+     tests checks whether libtool's `deplibs_check_method' works
+     properly.
+
+`demo-hardcode.test'
+     On all systems with shared libraries, the location of the library
+     can be encoded in executables that are linked against it *note
+     Linking executables::.  This test checks the conditions under
+     which your system linker hardcodes the library location, and
+     guarantees that they correspond to libtool's own notion of how
+     your linker behaves.
+
+`demo-relink.test'
+`depdemo-relink.test'
+     These tests check whether variable `shlibpath_overrides_runpath' is
+     properly set.  If the test fails, it will indicate what the
+     variable should have been set to.
+
+`demo-noinst-link.test'
+     Checks whether libtool will not try to link with a previously
+     installed version of a library when it should be linking with a
+     just-built one.
+
+`depdemo-conf.test'
+`depdemo-make.test'
+`depdemo-exec.test'
+`depdemo-inst.test'
+`depdemo-unst.test'
+`depdemo-static.test'
+`depdemo-static-make.test'
+`depdemo-static-exec.test'
+`depdemo-static-inst.test'
+`depdemo-static-unst.test'
+`depdemo-shared.test'
+`depdemo-shared-make.test'
+`depdemo-shared-exec.test'
+`depdemo-shared-inst.test'
+`depdemo-shared-unst.test'
+`depdemo-nofast.test'
+`depdemo-nofast-make.test'
+`depdemo-nofast-exec.test'
+`depdemo-nofast-inst.test'
+`depdemo-nofast-unst.test'
+     These programs check to see that the `tests/depdemo' subdirectory
+     of the libtool distribution can be configured, built, installed,
+     and uninstalled correctly.
+
+     The `tests/depdemo' subdirectory contains a demonstration of
+     inter-library dependencies with libtool.  The test programs link
+     some interdependent libraries.
+
+     The tests matching `depdemo-*make.test', `depdemo-*exec.test',
+     `depdemo-*inst.test' and `depdemo-*unst.test' are executed four
+     times, under four different libtool configurations:
+     `depdemo-conf.test' configures `depdemo/libtool' to build both
+     static and shared libraries, `depdemo-static.test' builds only
+     static libraries (`--disable-shared'), and `depdemo-shared.test'
+     builds only shared libraries (`--disable-static').
+     `depdemo-nofast.test' configures `depdemo/libtool' to disable the
+     fast-install mode (`--enable-fast-install=no').
+
+`mdemo-conf.test'
+`mdemo-make.test'
+`mdemo-exec.test'
+`mdemo-inst.test'
+`mdemo-unst.test'
+`mdemo-static.test'
+`mdemo-static-make.test'
+`mdemo-static-exec.test'
+`mdemo-static-inst.test'
+`mdemo-static-unst.test'
+`mdemo-shared.test'
+`mdemo-shared-make.test'
+`mdemo-shared-exec.test'
+`mdemo-shared-inst.test'
+`mdemo-shared-unst.test'
+     These programs check to see that the `tests/mdemo' subdirectory of
+     the libtool distribution can be configured, built, installed, and
+     uninstalled correctly.
+
+     The `tests/mdemo' subdirectory contains a demonstration of a
+     package that uses libtool and the system independent dlopen wrapper
+     `libltdl' to load modules.  The library `libltdl' provides a
+     dlopen wrapper for various platforms (POSIX) including support for
+     dlpreopened modules (*note Dlpreopening::).
+
+     The tests matching `mdemo-*make.test', `mdemo-*exec.test',
+     `mdemo-*inst.test' and `mdemo-*unst.test' are executed three
+     times, under three different libtool configurations:
+     `mdemo-conf.test' configures `mdemo/libtool' to build both static
+     and shared libraries, `mdemo-static.test' builds only static
+     libraries (`--disable-shared'), and `mdemo-shared.test' builds
+     only shared libraries (`--disable-static').
+
+`mdemo-dryrun.test'
+     This test checks whether libtool's `--dry-run' mode works properly.
+
+`mdemo2-conf.test'
+`mdemo2-exec.test'
+`mdemo2-make.test'
+     These programs check to see that the `tests/mdemo2' subdirectory of
+     the libtool distribution can be configured, built, and executed
+     correctly.
+
+     The `tests/mdemo2' directory contains a demonstration of a package
+     that attempts to link with a library (from the `tests/mdemo'
+     directory) that itself does dlopening of libtool modules.
+
+`link.test'
+     This test guarantees that linking directly against a non-libtool
+     static library works properly.
+
+`link-2.test'
+     This test makes sure that files ending in `.lo' are never linked
+     directly into a program file.
+
+`nomode.test'
+     Check whether we can actually get help for libtool.
+
+`objectlist.test'
+     Check that a nonexistent objectlist file is properly detected.
+
+`pdemo-conf.test'
+`pdemo-make.test'
+`pdemo-exec.test'
+`pdemo-inst.test'
+     These programs check to see that the `tests/pdemo' subdirectory of
+     the libtool distribution can be configured, built, and executed
+     correctly.
+
+     The `pdemo-conf.test' lowers the `max_cmd_len' variable in the
+     generated libtool script to test the measures to evade command line
+     length limitations.
+
+`quote.test'
+     This program checks libtool's metacharacter quoting.
+
+`sh.test'
+     Checks for some nonportable or dubious or undesired shell
+     constructs in shell scripts.
+
+`suffix.test'
+     When other programming languages are used with libtool (*note
+     Other languages::), the source files may end in suffixes other
+     than `.c'.  This test validates that libtool can handle suffixes
+     for all the file types that it supports, and that it fails when
+     the suffix is invalid.
+
+`tagdemo-conf.test'
+`tagdemo-make.test'
+`tagdemo-exec.test'
+`tagdemo-static.test'
+`tagdemo-static-make.test'
+`tagdemo-static-exec.test'
+`tagdemo-shared.test'
+`tagdemo-shared-make.test'
+`tagdemo-shared-exec.test'
+`tagdemo-undef.test'
+`tagdemo-undef-make.test'
+`tagdemo-undef-exec.test'
+     These programs check to see that the `tests/tagdemo' subdirectory
+     of the libtool distribution can be configured, built, and executed
+     correctly.
+
+     The `tests/tagdemo' directory contains a demonstration of a package
+     that uses libtool's multi-language support through configuration
+     tags.  It generates a library from C++ sources, which is then
+     linked to a C++ program.
+
+`f77demo-conf.test'
+`f77demo-make.test'
+`f77demo-exec.test'
+`f77demo-static.test'
+`f77demo-static-make.test'
+`f77demo-static-exec.test'
+`f77demo-shared.test'
+`f77demo-shared-make.test'
+`f77demo-shared-exec.test'
+     These programs check to see that the `tests/f77demo' subdirectory
+     of the libtool distribution can be configured, built, and executed
+     correctly.
+
+     The `tests/f77demo' tests test Fortran 77 support in libtool by
+     creating libraries from Fortran 77 sources, and mixed Fortran and C
+     sources, and a Fortran 77 program to use the former library, and a
+     C program to use the latter library.
+
+`fcdemo-conf.test'
+`fcdemo-make.test'
+`fcdemo-exec.test'
+`fcdemo-static.test'
+`fcdemo-static-make.test'
+`fcdemo-static-exec.test'
+`fcdemo-shared.test'
+`fcdemo-shared-make.test'
+`fcdemo-shared-exec.test'
+     These programs check to see that the `tests/fcdemo' subdirectory
+     of the libtool distribution can be configured, built, and executed
+     correctly.
+
+     The `tests/fcdemo' is similar to the `tests/f77demo' directory,
+     except that Fortran 90 is used in combination with the `FC'
+     interface provided by Autoconf and Automake.
+
+
+   The new, Autotest-based test suite uses keywords to classify certain
+test groups:
+
+`CXX'
+`F77'
+`FC'
+`GCJ'
+     The test group exercises one of these `libtool' language tags.
+
+`autoconf'
+`automake'
+     These keywords denote that the respective external program is
+     needed by the test group.  The tests are typically skipped if the
+     program is not installed.  The `automake' keyword may also denote
+     use of the `aclocal' program.
+
+`interactive'
+     This test group may require user interaction on some systems.
+     Typically, this means closing a popup window about a DLL load
+     error on Windows.
+
+`libltdl'
+     Denote that the `libltdl' library is exercised by the test group.
+
+`libtool'
+`libtoolize'
+     Denote that the `libtool' or `libtoolize' scripts are exercised by
+     the test group, respectively.
+
+`recursive'
+     Denote that this test group may recursively re-invoke the test
+     suite itself, with changed settings and maybe a changed `libtool'
+     script.  You may use the `INNER_TESTSUITEFLAGS' variable to pass
+     additional settings to this recursive invocation.  Typically,
+     recursive invocations delimit the set of tests with another
+     keyword, for example by passing `-k libtool' right before the
+     expansion of the `INNER_TESTSUITEFLAGS' variable (without an
+     intervening space, so you get the chance for further delimitation).
+
+     Test groups with the keyword `recursive' should not be denoted with
+     keywords, in order to avoid infinite recursion.  As a consequence,
+     recursive test groups themselves should never require user
+     interaction, while the test groups they invoke may do so.
+
+   There is a convenience target `check-noninteractive' that runs all
+tests from both test suites that do not cause user interaction on
+Windows.  Conversely, the target `check-interactive' runs the
+complement of tests and might require closing popup windows about DLL
+load errors on Windows.
+
+
+File: libtool.info,  Node: When tests fail,  Prev: Test descriptions,  Up: Libtool test suite
+
+14.1.2 When tests fail
+----------------------
+
+When the tests in the old test suite are run via `make check', output
+is caught in per-test `tests/TEST-NAME.log' files and summarized in the
+`test-suite.log' file.  The exit status of each program tells the
+`Makefile' whether or not the test succeeded.
+
+   If a test fails, it means that there is either a programming error in
+libtool, or in the test program itself.
+
+   To investigate a particular test, you may run it directly, as you
+would a normal program.  When the test is invoked in this way, it
+produces output that may be useful in determining what the problem is.
+
+   The new, Autotest-based test suite produces as output a file
+`tests/testsuite.log' which contains information about failed tests.
+
+   You can pass options to the test suite through the `make' variable
+`TESTSUITEFLAGS' (*note The Autoconf Manual: (autoconf)testsuite
+Invocation.).
+
+
+File: libtool.info,  Node: Reporting bugs,  Prev: Libtool test suite,  Up: Troubleshooting
+
+14.2 Reporting bugs
+===================
+
+If you think you have discovered a bug in libtool, you should think
+twice: the libtool maintainer is notorious for passing the buck (or
+maybe that should be "passing the bug").  Libtool was invented to fix
+known deficiencies in shared library implementations, so, in a way, most
+of the bugs in libtool are actually bugs in other operating systems.
+However, the libtool maintainer would definitely be happy to add support
+for somebody else's buggy operating system.  [I wish there was a good
+way to do winking smiley-faces in Texinfo.]
+
+   Genuine bugs in libtool include problems with shell script
+portability, documentation errors, and failures in the test suite
+(*note Libtool test suite::).
+
+   First, check the documentation and help screens to make sure that the
+behaviour you think is a problem is not already mentioned as a feature.
+
+   Then, you should read the Emacs guide to reporting bugs (*note
+Reporting Bugs: (emacs)Bugs.).  Some of the details listed there are
+specific to Emacs, but the principle behind them is a general one.
+
+   Finally, send a bug report to the Libtool bug reporting address
+<bug-libtool@gnu.org> with any appropriate _facts_, such as test suite
+output (*note When tests fail::), all the details needed to reproduce
+the bug, and a brief description of why you think the behaviour is a
+bug.  Be sure to include the word "libtool" in the subject line, as
+well as the version number you are using (which can be found by typing
+`libtool --version').
+
+
+File: libtool.info,  Node: Maintaining,  Next: GNU Free Documentation License,  Prev: Troubleshooting,  Up: Top
+
+15 Maintenance notes for libtool
+********************************
+
+This chapter contains information that the libtool maintainer finds
+important.  It will be of no use to you unless you are considering
+porting libtool to new systems, or writing your own libtool.
+
+* Menu:
+
+* New ports::                   How to port libtool to new systems.
+* Tested platforms::            When libtool was last tested.
+* Platform quirks::             Information about different library systems.
+* libtool script contents::     Configuration information that libtool uses.
+* Cheap tricks::                Making libtool maintainership easier.
+
+
+File: libtool.info,  Node: New ports,  Next: Tested platforms,  Up: Maintaining
+
+15.1 Porting libtool to new systems
+===================================
+
+Before you embark on porting libtool to an unsupported system, it is
+worthwhile to send e-mail to the Libtool mailing list
+<libtool@gnu.org>, to make sure that you are not duplicating existing
+work.
+
+   If you find that any porting documentation is missing, please
+complain!  Complaints with patches and improvements to the
+documentation, or to libtool itself, are more than welcome.
+
+* Menu:
+
+* Information sources::         Where to find relevant documentation
+* Porting inter-library dependencies::  Implementation details explained
+
+
+File: libtool.info,  Node: Information sources,  Next: Porting inter-library dependencies,  Up: New ports
+
+15.1.1 Information sources
+--------------------------
+
+Once it is clear that a new port is necessary, you'll generally need the
+following information:
+
+canonical system name
+     You need the output of `config.guess' for this system, so that you
+     can make changes to the libtool configuration process without
+     affecting other systems.
+
+man pages for `ld' and `cc'
+     These generally describe what flags are used to generate PIC, to
+     create shared libraries, and to link against only static
+     libraries.  You may need to follow some cross references to find
+     the information that is required.
+
+man pages for `ld.so', `rtld', or equivalent
+     These are a valuable resource for understanding how shared
+     libraries are loaded on the system.
+
+man page for `ldconfig', or equivalent
+     This page usually describes how to install shared libraries.
+
+output from `ls -l /lib /usr/lib'
+     This shows the naming convention for shared libraries on the
+     system, including which names should be symbolic links.
+
+any additional documentation
+     Some systems have special documentation on how to build and install
+     shared libraries.
+
+   If you know how to program the Bourne shell, then you can complete
+the port yourself; otherwise, you'll have to find somebody with the
+relevant skills who will do the work.  People on the libtool mailing
+list are usually willing to volunteer to help you with new ports, so
+you can send the information to them.
+
+   To do the port yourself, you'll definitely need to modify the
+`libtool.m4' macros in order to make platform-specific changes to the
+configuration process.  You should search that file for the `PORTME'
+keyword, which will give you some hints on what you'll need to change.
+In general, all that is involved is modifying the appropriate
+configuration variables (*note libtool script contents::).
+
+   Your best bet is to find an already-supported system that is similar
+to yours, and make your changes based on that.  In some cases, however,
+your system will differ significantly from every other supported system,
+and it may be necessary to add new configuration variables, and modify
+the `ltmain.in' script accordingly.  Be sure to write to the mailing
+list before you make changes to `ltmain.in', since they may have advice
+on the most effective way of accomplishing what you want.
+
+
+File: libtool.info,  Node: Porting inter-library dependencies,  Prev: Information sources,  Up: New ports
+
+15.1.2 Porting inter-library dependencies support
+-------------------------------------------------
+
+Since version 1.2c, libtool has re-introduced the ability to do
+inter-library dependency on some platforms, thanks to a patch by Toshio
+Kuratomi <badger@prtr-13.ucsc.edu>.  Here's a shortened version of the
+message that contained his patch:
+
+   The basic architecture is this: in `libtool.m4', the person who
+writes libtool makes sure `$deplibs' is included in `$archive_cmds'
+somewhere and also sets the variable `$deplibs_check_method', and maybe
+`$file_magic_cmd' when `deplibs_check_method' is file_magic.
+
+   `deplibs_check_method' can be one of five things:
+`file_magic [REGEX]'
+     looks in the library link path for libraries that have the right
+     libname.  Then it runs `$file_magic_cmd' on the library and checks
+     for a match against the extended regular expression REGEX.  When
+     `file_magic_test_file' is set by `libtool.m4', it is used as an
+     argument to `$file_magic_cmd' in order to verify whether the
+     regular expression matches its output, and warn the user otherwise.
+
+`test_compile'
+     just checks whether it is possible to link a program out of a list
+     of libraries, and checks which of those are listed in the output of
+     `ldd'.  It is currently unused, and will probably be dropped in the
+     future.
+
+`pass_all'
+     will pass everything without any checking.  This may work on
+     platforms in which code is position-independent by default and
+     inter-library dependencies are properly supported by the dynamic
+     linker, for example, on DEC OSF/1 3 and 4.
+
+`none'
+     It causes deplibs to be reassigned `deplibs=""'.  That way
+     `archive_cmds' can contain deplibs on all platforms, but not have
+     deplibs used unless needed.
+
+`unknown'
+     is the default for all systems unless overridden in `libtool.m4'.
+     It is the same as `none', but it documents that we really don't
+     know what the correct value should be, and we welcome patches that
+     improve it.
+
+   Then in `ltmain.in' we have the real workhorse: a little
+initialization and postprocessing (to setup/release variables for use
+with eval echo libname_spec etc.) and a case statement that decides the
+method that is being used.  This is the real code... I wish I could
+condense it a little more, but I don't think I can without function
+calls.  I've mostly optimized it (moved things out of loops, etc.) but
+there is probably some fat left.  I thought I should stop while I was
+ahead, work on whatever bugs you discover, etc. before thinking about
+more than obvious optimizations.
+
+
+File: libtool.info,  Node: Tested platforms,  Next: Platform quirks,  Prev: New ports,  Up: Maintaining
+
+15.2 Tested platforms
+=====================
+
+This table describes when libtool was last known to be tested on
+platforms where it claims to support shared libraries:
+
+     -------------------------------------------------------
+     canonical host name          compiler  libtool results
+       (tools versions)                     release
+     -------------------------------------------------------
+     alpha-dec-osf5.1		cc	 1.3e	  ok (1.910)
+     alpha-dec-osf4.0f               gcc      1.3e     ok (1.910)
+     alpha-dec-osf4.0f               cc       1.3e     ok (1.910)
+     alpha-dec-osf3.2                gcc      0.8      ok
+     alpha-dec-osf3.2                cc       0.8      ok
+     alpha-dec-osf2.1                gcc      1.2f     NS
+     alpha*-unknown-linux-gnu        gcc      1.3b     ok
+       (egcs-1.1.2, GNU ld 2.9.1.0.23)
+     hppa2.0w-hp-hpux11.00           cc       1.2f     ok
+     hppa2.0-hp-hpux10.20            cc       1.3.2    ok
+     hppa1.1-hp-hpux10.20            gcc      1.2f     ok
+     hppa1.1-hp-hpux10.20            cc       1.3c     ok (1.821)
+     hppa1.1-hp-hpux10.10            gcc      1.2f     ok
+     hppa1.1-hp-hpux10.10            cc       1.2f     ok
+     hppa1.1-hp-hpux9.07             gcc      1.2f     ok
+     hppa1.1-hp-hpux9.07             cc       1.2f     ok
+     hppa1.1-hp-hpux9.05             gcc      1.2f     ok
+     hppa1.1-hp-hpux9.05             cc       1.2f     ok
+     hppa1.1-hp-hpux9.01             gcc      1.2f     ok
+     hppa1.1-hp-hpux9.01             cc       1.2f     ok
+     i*86-*-beos                     gcc      1.2f     ok
+     i*86-*-bsdi4.0.1                gcc      1.3c     ok
+       (gcc-2.7.2.1)
+     i*86-*-bsdi4.0                  gcc      1.2f     ok
+     i*86-*-bsdi3.1                  gcc      1.2e     NS
+     i*86-*-bsdi3.0                  gcc      1.2e     NS
+     i*86-*-bsdi2.1                  gcc      1.2e     NS
+     i*86-pc-cygwin                  gcc      1.3b     NS
+       (egcs-1.1 stock b20.1 compiler)
+     i*86-*-dguxR4.20MU01            gcc      1.2      ok
+     i*86-*-freebsd4.3		gcc      1.3e     ok (1.912)
+     i*86-*-freebsdelf4.0            gcc      1.3c     ok
+       (egcs-1.1.2)
+     i*86-*-freebsdelf3.2            gcc      1.3c     ok
+       (gcc-2.7.2.1)
+     i*86-*-freebsdelf3.1            gcc      1.3c     ok
+       (gcc-2.7.2.1)
+     i*86-*-freebsdelf3.0            gcc      1.3c     ok
+     i*86-*-freebsd3.0               gcc      1.2e     ok
+     i*86-*-freebsd2.2.8             gcc      1.3c     ok
+       (gcc-2.7.2.1)
+     i*86-*-freebsd2.2.6             gcc      1.3b     ok
+       (egcs-1.1 & gcc-2.7.2.1, native ld)
+     i*86-*-freebsd2.1.5             gcc      0.5      ok
+     i*86-*-netbsd1.5                gcc      1.3e     ok (1.901)
+       (egcs-1.1.2)
+     i*86-*-netbsd1.4                gcc      1.3c     ok
+       (egcs-1.1.1)
+     i*86-*-netbsd1.4.3A             gcc      1.3e     ok (1.901)
+     i*86-*-netbsd1.3.3              gcc      1.3c     ok
+       (gcc-2.7.2.2+myc2)
+     i*86-*-netbsd1.3.2              gcc      1.2e     ok
+     i*86-*-netbsd1.3I               gcc      1.2e     ok
+       (egcs 1.1?)
+     i*86-*-netbsd1.2                gcc      0.9g     ok
+     i*86-*-linux-gnu		gcc	 1.3e	  ok (1.901)
+       (Red Hat 7.0, gcc "2.96")
+     i*86-*-linux-gnu		gcc	 1.3e	  ok (1.911)
+       (SuSE 7.0, gcc 2.95.2)
+     i*86-*-linux-gnulibc1           gcc      1.2f     ok
+     i*86-*-openbsd2.5               gcc      1.3c     ok
+       (gcc-2.8.1)
+     i*86-*-openbsd2.4               gcc      1.3c     ok
+       (gcc-2.8.1)
+     i*86-*-solaris2.7               gcc      1.3b     ok
+       (egcs-1.1.2, native ld)
+     i*86-*-solaris2.6               gcc      1.2f     ok
+     i*86-*-solaris2.5.1             gcc      1.2f     ok
+     i*86-ncr-sysv4.3.03             gcc      1.2f     ok
+     i*86-ncr-sysv4.3.03             cc       1.2e     ok
+       (cc -Hnocopyr)
+     i*86-pc-sco3.2v5.0.5		cc	 1.3c	  ok
+     i*86-pc-sco3.2v5.0.5		gcc	 1.3c	  ok
+       (gcc 95q4c)
+     i*86-pc-sco3.2v5.0.5		gcc	 1.3c	  ok
+       (egcs-1.1.2)
+     i*86-sco-sysv5uw7.1.1		gcc	 1.3e	  ok (1.901)
+       (gcc-2.95.2, SCO linker)
+     i*86-UnixWare7.1.0-sysv5	cc	 1.3c	  ok
+     i*86-UnixWare7.1.0-sysv5	gcc	 1.3c	  ok
+       (egcs-1.1.1)
+     m68k-next-nextstep3             gcc      1.2f     NS
+     m68k-sun-sunos4.1.1             gcc      1.2f     NS
+       (gcc-2.5.7)
+     m88k-dg-dguxR4.12TMU01          gcc      1.2      ok
+     m88k-motorola-sysv4             gcc      1.3      ok
+       (egcs-1.1.2)
+     mips-sgi-irix6.5                gcc      1.2f     ok
+       (gcc-2.8.1)
+     mips-sgi-irix6.4                gcc      1.2f     ok
+     mips-sgi-irix6.3                gcc      1.3b     ok
+       (egcs-1.1.2, native ld)
+     mips-sgi-irix6.3                cc       1.3b     ok
+       (cc 7.0)
+     mips-sgi-irix6.2                gcc      1.2f     ok
+     mips-sgi-irix6.2                cc       0.9      ok
+     mips-sgi-irix5.3                gcc      1.2f     ok
+       (egcs-1.1.1)
+     mips-sgi-irix5.3                gcc      1.2f     NS
+       (gcc-2.6.3)
+     mips-sgi-irix5.3                cc       0.8      ok
+     mips-sgi-irix5.2                gcc      1.3b     ok
+       (egcs-1.1.2, native ld)
+     mips-sgi-irix5.2                cc       1.3b     ok
+       (cc 3.18)
+     mips-sni-sysv4			cc       1.3.5    ok
+       (Siemens C-compiler)
+     mips-sni-sysv4			gcc      1.3.5    ok
+       (gcc-2.7.2.3, GNU assembler 2.8.1, native ld)
+     mipsel-unknown-openbsd2.1       gcc      1.0      ok
+     powerpc-apple-darwin6.4         gcc      1.5      ok
+     (apple dev tools released 12/2002)
+     powerpc-ibm-aix4.3.1.0          gcc      1.2f     ok
+       (egcs-1.1.1)
+     powerpc-ibm-aix4.2.1.0          gcc      1.2f     ok
+       (egcs-1.1.1)
+     powerpc-ibm-aix4.1.5.0          gcc      1.2f     ok
+       (egcs-1.1.1)
+     powerpc-ibm-aix4.1.5.0          gcc      1.2f     NS
+       (gcc-2.8.1)
+     powerpc-ibm-aix4.1.4.0          gcc      1.0      ok
+     powerpc-ibm-aix4.1.4.0          xlc      1.0i     ok
+     rs6000-ibm-aix4.1.5.0           gcc      1.2f     ok
+       (gcc-2.7.2)
+     rs6000-ibm-aix4.1.4.0           gcc      1.2f     ok
+       (gcc-2.7.2)
+     rs6000-ibm-aix3.2.5             gcc      1.0i     ok
+     rs6000-ibm-aix3.2.5             xlc      1.0i     ok
+     sparc-sun-solaris2.8		gcc	 1.3e	  ok (1.913)
+       (gcc-2.95.3 & native ld)
+     sparc-sun-solaris2.7            gcc      1.3e     ok (1.913)
+       (gcc-2.95.3 & native ld)
+     sparc-sun-solaris2.6            gcc      1.3e     ok (1.913)
+       (gcc-2.95.3 & native ld)
+     sparc-sun-solaris2.5.1          gcc      1.3e     ok (1.911)
+     sparc-sun-solaris2.5            gcc      1.3b     ok
+       (egcs-1.1.2, GNU ld 2.9.1 & native ld)
+     sparc-sun-solaris2.5            cc       1.3b     ok
+       (SC 3.0.1)
+     sparc-sun-solaris2.4            gcc      1.0a     ok
+     sparc-sun-solaris2.4            cc       1.0a     ok
+     sparc-sun-solaris2.3            gcc      1.2f     ok
+     sparc-sun-sunos4.1.4            gcc      1.2f     ok
+     sparc-sun-sunos4.1.4            cc       1.0f     ok
+     sparc-sun-sunos4.1.3_U1         gcc      1.2f     ok
+     sparc-sun-sunos4.1.3C           gcc      1.2f     ok
+     sparc-sun-sunos4.1.3            gcc      1.3b     ok
+       (egcs-1.1.2, GNU ld 2.9.1 & native ld)
+     sparc-sun-sunos4.1.3            cc       1.3b     ok
+     sparc-unknown-bsdi4.0           gcc      1.2c     ok
+     sparc-unknown-linux-gnulibc1    gcc      1.2f     ok
+     sparc-unknown-linux-gnu         gcc      1.3b     ok
+       (egcs-1.1.2, GNU ld 2.9.1.0.23)
+     sparc64-unknown-linux-gnu       gcc      1.2f     ok
+
+     Notes:
+     - "ok" means "all tests passed".
+     - "NS" means "Not Shared", but OK for static libraries
+
+   Note: The vendor-distributed HP-UX `sed'(1) programs are horribly
+broken, and cannot handle libtool's requirements, so users may report
+unusual problems.  There is no workaround except to install a working
+`sed' (such as GNU `sed') on these systems.
+
+   Note: The vendor-distributed NCR MP-RAS `cc' programs emits
+copyright on standard error that confuse tests on size of
+`conftest.err'.  The workaround is to specify `CC' when run `configure'
+with `CC='cc -Hnocopyr''.
+
+
+File: libtool.info,  Node: Platform quirks,  Next: libtool script contents,  Prev: Tested platforms,  Up: Maintaining
+
+15.3 Platform quirks
+====================
+
+This section is dedicated to the sanity of the libtool maintainers.  It
+describes the programs that libtool uses, how they vary from system to
+system, and how to test for them.
+
+   Because libtool is a shell script, it can be difficult to understand
+just by reading it from top to bottom.  This section helps show why
+libtool does things a certain way.  Combined with the scripts
+themselves, you should have a better sense of how to improve libtool, or
+write your own.
+
+* Menu:
+
+* References::                  Finding more information.
+* Compilers::                   Creating object files from source files.
+* Reloadable objects::          Binding object files together.
+* Multiple dependencies::       Removing duplicate dependent libraries.
+* Archivers::                   Programs that create static archives.
+* Cross compiling::             Issues that arise when cross compiling.
+* File name conversion::        Converting file names between platforms.
+* Windows DLLs::                Windows header defines.
+
+
+File: libtool.info,  Node: References,  Next: Compilers,  Up: Platform quirks
+
+15.3.1 References
+-----------------
+
+The following is a list of valuable documentation references:
+
+   * SGI's IRIX Manual Pages can be found at
+     `http://techpubs.sgi.com/cgi-bin/infosrch.cgi?cmd=browse&db=man'.
+
+   * Sun's free service area
+     (`http://www.sun.com/service/online/free.html') and documentation
+     server (`http://docs.sun.com/').
+
+   * Compaq's Tru64 UNIX online documentation is at
+     (`http://tru64unix.compaq.com/faqs/publications/pub_page/doc_list.html')
+     with C++ documentation at
+     (`http://tru64unix.compaq.com/cplus/docs/index.htm').
+
+   * Hewlett-Packard has online documentation at
+     (`http://docs.hp.com/index.html').
+
+   * IBM has online documentation at
+     (`http://www.rs6000.ibm.com/resource/aix_resource/Pubs/').
+
+
+File: libtool.info,  Node: Compilers,  Next: Reloadable objects,  Prev: References,  Up: Platform quirks
+
+15.3.2 Compilers
+----------------
+
+The only compiler characteristics that affect libtool are the flags
+needed (if any) to generate PIC objects.  In general, if a C compiler
+supports certain PIC flags, then any derivative compilers support the
+same flags.  Until there are some noteworthy exceptions to this rule,
+this section will document only C compilers.
+
+   The following C compilers have standard command line options,
+regardless of the platform:
+
+`gcc'
+     This is the GNU C compiler, which is also the system compiler for
+     many free operating systems (FreeBSD, GNU/Hurd, GNU/Linux, Lites,
+     NetBSD, and OpenBSD, to name a few).
+
+     The `-fpic' or `-fPIC' flags can be used to generate
+     position-independent code.  `-fPIC' is guaranteed to generate
+     working code, but the code is slower on m68k, m88k, and Sparc
+     chips.  However, using `-fpic' on those chips imposes arbitrary
+     size limits on the shared libraries.
+
+   The rest of this subsection lists compilers by the operating system
+that they are bundled with:
+
+`aix3*'
+`aix4*'
+     Most AIX compilers have no PIC flags, since AIX (with the
+     exception of AIX for IA-64) runs on PowerPC and RS/6000 chips. (1)
+
+`hpux10*'
+     Use `+Z' to generate PIC.
+
+`osf3*'
+     Digital/UNIX 3.x does not have PIC flags, at least not on the
+     PowerPC platform.
+
+`solaris2*'
+     Use `-KPIC' to generate PIC.
+
+`sunos4*'
+     Use `-PIC' to generate PIC.
+
+   ---------- Footnotes ----------
+
+   (1) All code compiled for the PowerPC and RS/6000 chips
+(`powerpc-*-*', `powerpcle-*-*', and `rs6000-*-*') is
+position-independent, regardless of the operating system or compiler
+suite.  So, "regular objects" can be used to build shared libraries on
+these systems and no special PIC compiler flags are required.
+
+
+File: libtool.info,  Node: Reloadable objects,  Next: Multiple dependencies,  Prev: Compilers,  Up: Platform quirks
+
+15.3.3 Reloadable objects
+-------------------------
+
+On all known systems, a reloadable object can be created by running `ld
+-r -o OUTPUT.o INPUT1.o INPUT2.o'.  This reloadable object may be
+treated as exactly equivalent to other objects.
+
+
+File: libtool.info,  Node: Multiple dependencies,  Next: Archivers,  Prev: Reloadable objects,  Up: Platform quirks
+
+15.3.4 Multiple dependencies
+----------------------------
+
+On most modern platforms the order in which dependent libraries are
+listed has no effect on object generation.  In theory, there are
+platforms that require libraries that provide missing symbols to other
+libraries to be listed after those libraries whose symbols they provide.
+
+   Particularly, if a pair of static archives each resolve some of the
+other's symbols, it might be necessary to list one of those archives
+both before and after the other one.  Libtool does not currently cope
+with this situation well, since duplicate libraries are removed from
+the link line by default.  Libtool provides the command line option
+`--preserve-dup-deps' to preserve all duplicate dependencies in cases
+where it is necessary.
+
+
+File: libtool.info,  Node: Archivers,  Next: Cross compiling,  Prev: Multiple dependencies,  Up: Platform quirks
+
+15.3.5 Archivers
+----------------
+
+On all known systems, building a static library can be accomplished by
+running `ar cru libNAME.a OBJ1.o OBJ2.o ...', where the `.a' file is
+the output library, and each `.o' file is an object file.
+
+   On all known systems, if there is a program named `ranlib', then it
+must be used to "bless" the created library before linking against it,
+with the `ranlib libNAME.a' command.  Some systems, like Irix, use the
+`ar ts' command, instead.
+
+
+File: libtool.info,  Node: Cross compiling,  Next: File name conversion,  Prev: Archivers,  Up: Platform quirks
+
+15.3.6 Cross compiling
+----------------------
+
+Most build systems support the ability to compile libraries and
+applications on one platform for use on a different platform, provided
+a compiler capable of generating the appropriate output is available.
+In such cross compiling scenarios, the platform on which the libraries
+or applications are compiled is called the "build platform", while the
+platform on which the libraries or applications are intended to be used
+or executed is called the "host platform".  *note The GNU Build System:
+(automake)GNU Build System, of which libtool is a part, supports cross
+compiling via arguments passed to the configure script: `--build=...'
+and `--host=...'. However, when the build platform and host platform
+are very different, libtool is required to make certain accommodations
+to support these scenarios.
+
+   In most cases, because the build platform and host platform differ,
+the cross-compiled libraries and executables can't be executed or
+tested on the build platform where they were compiled.  The testsuites
+of most build systems will often skip any tests that involve executing
+such foreign executables when cross-compiling.  However, if the build
+platform and host platform are sufficiently similar, it is often
+possible to run cross-compiled applications.  Libtool's own testsuite
+often attempts to execute cross-compiled tests, but will mark any
+failures as _skipped_ since the failure might simply be due to the
+differences between the two platforms.
+
+   In addition to cases where the host platform and build platform are
+extremely similar (e.g. `i586-pc-linux-gnu' and `i686-pc-linux-gnu'),
+there is another case in which cross-compiled host applications may be
+executed on the build platform.  This is possible when the build
+platform supports an emulation or API-enhanced environment for the host
+platform.  One example of this situation would be if the build platform
+were MinGW, and the host platform were Cygwin (or vice versa).  Both of
+these platforms can actually operate within a single Windows instance,
+so Cygwin applications can be launched from a MinGW context, and vice
+versa--provided certain care is taken.  Another example would be if the
+build platform were GNU/Linux on an x86 32bit processor, and the host
+platform were MinGW.  In this situation, the Wine
+(http://www.winehq.org/) environment can be used to launch Windows
+applications from the GNU/Linux operating system; again, provided
+certain care is taken.
+
+   One particular issue occurs when a Windows platform such as MinGW,
+Cygwin, or MSYS is the host or build platform, while the other platform
+is a Unix-style system.  In these cases, there are often conflicts
+between the format of the file names and paths expected within host
+platform libraries and executables, and those employed on the build
+platform.
+
+   This situation is best described using a concrete example: suppose
+the build platform is GNU/Linux with canonical triplet
+`i686-pc-linux-gnu'.  Suppose further that the host platform is MinGW
+with canonical triplet `i586-pc-mingw32'.  On the GNU/Linux platform
+there is a cross compiler following the usual naming conventions of
+such compilers, where the compiler name is prefixed by the host
+canonical triplet (or suitable alias).  (For more information
+concerning canonical triplets and platform aliases, see *note
+Specifying Target Triplets: (autoconf)Specifying Target Triplets. and
+*note Canonicalizing: (autoconf)Canonicalizing.)  In this case, the C
+compiler is named `i586-pc-mingw32-gcc'.
+
+   As described in *note Wrapper executables::, for the MinGW host
+platform libtool uses a wrapper executable to set various environment
+variables before launching the actual program executable.  Like the
+program executable, the wrapper executable is cross-compiled for the
+host platform (that is, for MinGW).  As described above, ordinarily a
+host platform executable cannot be executed on the build platform, but
+in this case the Wine environment could be used to launch the MinGW
+application from GNU/Linux.  However, the wrapper executable, as a host
+platform (MinGW) application, must set the `PATH' variable so that the
+true application's dependent libraries can be located--but the contents
+of the `PATH' variable must be structured for MinGW.  Libtool must use
+the Wine file name mapping facilities to determine the correct value so
+that the wrapper executable can set the `PATH' variable to point to the
+correct location.
+
+   For example, suppose we are compiling an application in `/var/tmp' on
+GNU/Linux, using separate source code and build directories:
+
+     `/var/tmp/foo-1.2.3/app/'          (application source code)
+     `/var/tmp/foo-1.2.3/lib/'          (library source code)
+     `/var/tmp/BUILD/app/'              (application build objects here)
+     `/var/tmp/BUILD/lib/'              (library build objects here)
+
+   Since the library will be built in `/var/tmp/BUILD/lib', the wrapper
+executable (which will be in `/var/tmp/BUILD/app') must add that
+directory to `PATH' (actually, it must add the directory named OBJDIR
+under `/var/tmp/BUILD/lib', but we'll ignore that detail for now).
+However, Windows does not have a concept of Unix-style file or
+directory names such as `/var/tmp/BUILD/lib'.  Therefore, Wine provides
+a mapping from Windows file names such as `C:\Program Files' to specific
+Unix-style file names.  Wine also provides a utility that can be used
+to map Unix-style file names to Windows file names.
+
+   In this case, the wrapper executable should actually add the value
+
+     Z:\var\tmp\BUILD\lib
+
+to the `PATH'.  libtool contains support for path conversions of this
+type, for a certain limited set of build and host platform
+combinations. In this case, libtool will invoke Wine's `winepath'
+utility to ensure that the correct `PATH' value is used.  For more
+information, see *note File name conversion::.
+
+
+File: libtool.info,  Node: File name conversion,  Next: Windows DLLs,  Prev: Cross compiling,  Up: Platform quirks
+
+15.3.7 File name conversion
+---------------------------
+
+In certain situations, libtool must convert file names and paths between
+formats appropriate to different platforms.  Usually this occurs when
+cross-compiling, and affects only the ability to launch host platform
+executables on the build platform using an emulation or API-enhancement
+environment such as Wine.  Failure to convert paths (*note File Name
+Conversion Failure::) will cause a warning to be issued, but rarely
+causes the build to fail--and should have no affect on the compiled
+products, once installed properly on the host platform.  For more
+information, *note Cross compiling::.
+
+   However, file name conversion may also occur in another scenario:
+when using a Unix emulation system on Windows (such as Cygwin or MSYS),
+combined with a native Windows compiler such as MinGW or MSVC.  Only a
+limited set of such scenarios are currently supported; in other cases
+file name conversion is skipped.  The lack of file name conversion
+usually means that uninstalled executables can't be launched, but only
+rarely causes the build to fail (*note File Name Conversion Failure::).
+
+   libtool supports file name conversion in the following scenarios:
+
+build platform     host platform      Notes
+--------------------------------------------------------------------------- 
+MinGW (MSYS)       MinGW (Windows)    *note Native MinGW File Name
+                                      Conversion::
+Cygwin             MinGW (Windows)    *note Cygwin/Windows File Name
+                                      Conversion::
+Unix + Wine        MinGW (Windows)    Requires Wine. *note Unix/Windows
+                                      File Name Conversion::
+MinGW (MSYS)       Cygwin             Requires `LT_CYGPATH'. *note
+                                      LT_CYGPATH::. Provided for testing
+                                      purposes only.
+Unix + Wine        Cygwin             Requires both Wine and
+                                      `LT_CYGPATH', but does not yet work
+                                      with Cygwin 1.7.7 and Wine-1.2.
+                                      See *note Unix/Windows File Name
+                                      Conversion:: and *note LT_CYGPATH::.
+
+* Menu:
+
+* File Name Conversion Failure::  What happens when file name conversion fails
+* Native MinGW File Name Conversion::  MSYS file name conversion idiosyncrasies
+* Cygwin/Windows File Name Conversion::  Using `cygpath' to convert Cygwin file names
+* Unix/Windows File Name Conversion::  Using Wine to convert Unix paths
+* LT_CYGPATH::                  Invoking `cygpath' from other environments
+* Cygwin to MinGW Cross::       Other notes concerning MinGW cross
+
+
+File: libtool.info,  Node: File Name Conversion Failure,  Next: Native MinGW File Name Conversion,  Up: File name conversion
+
+15.3.7.1 File Name Conversion Failure
+.....................................
+
+In most cases, file name conversion is not needed or attempted.
+However, when libtool detects that a specific combination of build and
+host platform does require file name conversion, it is possible that
+the conversion may fail.  In these cases, you may see a warning such as
+the following:
+
+     Could not determine the host file name corresponding to
+       `... a file name ...'
+     Continuing, but uninstalled executables may not work.
+
+or
+
+     Could not determine the host path corresponding to
+       `... a path ...'
+     Continuing, but uninstalled executables may not work.
+
+This should not cause the build to fail.  At worst, it means that the
+wrapper executable will specify file names or paths appropriate for the
+build platform.  Since those are not appropriate for the host platform,
+the uninstalled executables would not operate correctly, even when the
+wrapper executable is launched via the appropriate emulation or
+API-enhancement (e.g. Wine).  Simply install the executables on the
+host platform, and execute them there.
+
+
+File: libtool.info,  Node: Native MinGW File Name Conversion,  Next: Cygwin/Windows File Name Conversion,  Prev: File Name Conversion Failure,  Up: File name conversion
+
+15.3.7.2 Native MinGW File Name Conversion
+..........................................
+
+MSYS is a Unix emulation environment for Windows, and is specifically
+designed such that in normal usage it _pretends_ to be MinGW or native
+Windows, but understands Unix-style file names and paths, and supports
+standard Unix tools and shells.  Thus, "native" MinGW builds are
+actually an odd sort of cross-compile, from an MSYS Unix emulation
+environment "pretending" to be MinGW, to actual native Windows.
+
+   When an MSYS shell launches a native Windows executable (as opposed
+to other _MSYS_ executables), it uses a system of heuristics to detect
+any command-line arguments that contain file names or paths.  It
+automatically converts these file names from the MSYS (Unix-like)
+format, to the corresponding Windows file name, before launching the
+executable.  However, this auto-conversion facility is only available
+when using the MSYS runtime library.  The wrapper executable itself is
+a MinGW application (that is, it does not use the MSYS runtime
+library).  The wrapper executable must set `PATH' to, and call
+`_spawnv' with, values that have already been converted from MSYS
+format to Windows.  Thus, when libtool writes the source code for the
+wrapper executable, it must manually convert MSYS paths to Windows
+format, so that the Windows values can be hard-coded into the wrapper
+executable.
+
+
+File: libtool.info,  Node: Cygwin/Windows File Name Conversion,  Next: Unix/Windows File Name Conversion,  Prev: Native MinGW File Name Conversion,  Up: File name conversion
+
+15.3.7.3 Cygwin/Windows File Name Conversion
+............................................
+
+Cygwin provides a Unix emulation environment for Windows.  As part of
+that emulation, it provides a file system mapping that presents the
+Windows file system in a Unix-compatible manner.  Cygwin also provides
+a utility `cygpath' that can be used to convert file names and paths
+between the two representations.  In a correctly configured Cygwin
+installation, `cygpath' is always present, and is in the `PATH'.
+
+   Libtool uses `cygpath' to convert from Cygwin (Unix-style) file names
+and paths to Windows format when the build platform is Cygwin and the
+host platform is MinGW.
+
+   When the host platform is Cygwin, but the build platform is MSYS or
+some Unix system, libtool also uses `cygpath' to convert from Windows
+to Cygwin format (after first converting from the build platform format
+to Windows format; see *note Native MinGW File Name Conversion:: and
+*note Unix/Windows File Name Conversion::).  Because the build platform
+is not Cygwin, `cygpath' is not (and should not be) in the `PATH'.
+Therefore, in this configuration the environment variable `LT_CYGPATH'
+is required. *Note LT_CYGPATH::.
+
+
+File: libtool.info,  Node: Unix/Windows File Name Conversion,  Next: LT_CYGPATH,  Prev: Cygwin/Windows File Name Conversion,  Up: File name conversion
+
+15.3.7.4 Unix/Windows File Name Conversion
+..........................................
+
+Wine (http://www.winehq.org/) provides an interpretation environment for
+some Unix platforms in which Windows applications can be executed.  It
+provides a mapping between the Unix file system and a virtual Windows
+file system used by the Windows programs.  For the file name conversion
+to work, Wine must be installed and properly configured on the build
+platform, and the `winepath' application must be in the build
+platform's `PATH'.  In addition, on 32bit GNU/Linux it is usually
+helpful if the binfmt extension is enabled.
+
+
+File: libtool.info,  Node: LT_CYGPATH,  Next: Cygwin to MinGW Cross,  Prev: Unix/Windows File Name Conversion,  Up: File name conversion
+
+15.3.7.5 LT_CYGPATH
+...................
+
+For some cross-compile configurations (where the host platform is
+Cygwin), the `cygpath' program is used to convert file names from the
+build platform notation to the Cygwin form (technically, this
+conversion is from Windows notation to Cygwin notation; the conversion
+from the build platform format to Windows notation is performed via
+other means).  However, because the `cygpath' program is not (and
+should not be) in the `PATH' on the build platform, `LT_CYGPATH' must
+specify the full build platform file name (that is, the full Unix or
+MSYS file name) of the `cygpath' program.
+
+   The reason `cygpath' should not be in the build platform `PATH' is
+twofold: first, `cygpath' is usually installed in the same directory as
+many other Cygwin executables, such as `sed', `cp', etc.  If the build
+platform environment had this directory in its `PATH', then these
+Cygwin versions of common Unix utilities might be used in preference to
+the ones provided by the build platform itself, with deleterious
+effects.  Second, especially when Cygwin-1.7 or later is used, multiple
+Cygwin installations can coexist within the same Windows instance.
+Each installation will have separate "mount tables" specified in
+`CYGROOT-N/etc/fstab'.  These "mount tables" control how that instance
+of Cygwin will map Windows file names and paths to Cygwin form.  Each
+installation's `cygpath' utility automatically deduces the appropriate
+`/etc/fstab' file.  Since each `CYGROOT-N/etc/fstab' mount table may
+specify different mappings, it matters which `cygpath' is used.
+
+   Note that `cygpath' is a Cygwin application; to execute this tool
+from Unix requires a working and properly configured Wine installation,
+as well as enabling the GNU/Linux `binfmt' extension.  Furthermore, the
+Cygwin `setup.exe' tool should have been used, via Wine, to properly
+install Cygwin into the Wine file system (and registry).
+
+   Unfortunately, Wine support for Cygwin is intermittent.  Recent
+releases of Cygwin (1.7 and above) appear to require more Windows API
+support than Wine provides (as of Wine version 1.2); most Cygwin
+applications fail to execute.  This includes `cygpath' itself.  Hence,
+it is best _not_ to use the LT_CYGPATH machinery in libtool when
+performing Unix to Cygwin cross-compiles.  Similarly, it is best _not_
+to enable the GNU/Linux binfmt support in this configuration, because
+while Wine will fail to execute the compiled Cygwin applications, it
+will still exit with status zero.  This tends to confuse build systems
+and test suites (including libtool's own testsuite, resulting in
+spurious reported failures).  Wine support for the older Cygwin-1.5
+series appears satisfactory, but the Cygwin team no longer supports
+Cygwin-1.5.  It is hoped that Wine will eventually be improved such that
+Cygwin-1.7 will again operate correctly under Wine.  Until then,
+libtool will report warnings as described in *note File Name Conversion
+Failure:: in these scenarios.
+
+   However, `LT_CYGPATH' is also used for the MSYS to Cygwin cross
+compile scenario, and operates as expected.
+
+
+File: libtool.info,  Node: Cygwin to MinGW Cross,  Prev: LT_CYGPATH,  Up: File name conversion
+
+15.3.7.6 Cygwin to MinGW Cross
+..............................
+
+There are actually three different scenarios that could all
+legitimately be called a "Cygwin to MinGW" cross compile.  The current
+(and standard) definition is when there is a compiler that produces
+native Windows libraries and applications, but which itself is a Cygwin
+application, just as would be expected in any other cross compile setup.
+
+   However, historically there were two other definitions, which we
+will refer to as the _fake_ one, and the _lying_ one.
+
+   In the _fake_ Cygwin to MinGW cross compile case, you actually use a
+native MinGW compiler, but you do so from within a Cygwin environment:
+
+     export PATH="/c/MinGW/bin:${PATH}"
+     configure --build=i686-pc-cygwin \
+     	--host=mingw32 \
+     	NM=/c/MinGW/bin/nm.exe
+
+   In this way, the build system "knows" that you are cross compiling,
+and the file name conversion logic will be used.  However, because the
+tools (`mingw32-gcc', `nm', `ar') used are actually native Windows
+applications, they will not understand any Cygwin (that is, Unix-like)
+absolute file names passed as command line arguments (and, unlike MSYS,
+Cygwin does not automatically convert such arguments).  However, so
+long as only relative file names are used in the build system, and
+non-Windows-supported Unix idioms such as symlinks and mount points are
+avoided, this scenario should work.
+
+   If you must use absolute file names, you will have to force Libtool
+to convert file names for the toolchain in this case, by doing the
+following before you run configure:
+
+     export lt_cv_to_tool_file_cmd=func_convert_file_cygwin_to_w32
+   
+   In the _lying_ Cygwin to MinGW cross compile case, you lie to the
+build system:
+
+     export PATH="/c/MinGW/bin:${PATH}"
+     configure --build=i686-pc-mingw32 \
+     	--host=i686-pc-mingw32 \
+     	--disable-dependency-tracking
+
+and claim that the build platform is MinGW, even though you are actually
+running under _Cygwin_ and not MinGW.  In this case, libtool does _not_
+know that you are performing a cross compile, and thinks instead that
+you are performing a native MinGW build.  However, as described in
+(*note Native MinGW File Name Conversion::), that scenario triggers an
+"MSYS to Windows" file name conversion.  This, of course, is the wrong
+conversion since we are actually running under Cygwin.  Also, the
+toolchain is expecting Windows file names (not Cygwin) but unless told
+so Libtool will feed Cygwin file names to the toolchain in this case.
+To force the correct file name conversions in this situation, you
+should do the following _before_ running configure:
+
+     export lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+     export lt_cv_to_tool_file_cmd=func_convert_file_cygwin_to_w32
+   
+   Note that this relies on internal implementation details of libtool,
+and is subject to change.  Also, `--disable-dependency-tracking' is
+required, because otherwise the MinGW GCC will generate dependency
+files that contain Windows file names.  This, in turn, will confuse the
+Cygwin `make' program, which does not accept Windows file names:
+
+     Makefile:1: *** target pattern contains no `%'.  Stop.
+
+   There have also always been a number of other details required for
+the _lying_ case to operate correctly, such as the use of so-called
+"identity mounts":
+
+     # CYGWIN-ROOT/etc/fstab
+     D:/foo    /foo     some_fs binary 0 0
+     D:/bar    /bar     some_fs binary 0 0
+     E:/grill  /grill   some_fs binary 0 0
+
+   In this way, top-level directories of each drive are available using
+identical names within Cygwin.
+
+   Note that you also need to ensure that the standard Unix directories
+(like `/bin', `/lib', `/usr', `/etc') appear in the root of a drive.
+This means that you must install Cygwin itself into the `C:/' root
+directory (or `D:/', or `E:/', etc)--instead of the recommended
+installation into `C:/cygwin/'.  In addition, all file names used in
+the build system must be relative, symlinks should not be used within
+the source or build directory trees, and all `-M*' options to `gcc'
+except `-MMD' must be avoided.
+
+   This is quite a fragile setup, but it has been in historical use,
+and so is documented here.
+
+
+File: libtool.info,  Node: Windows DLLs,  Prev: File name conversion,  Up: Platform quirks
+
+15.3.8 Windows DLLs
+-------------------
+
+This topic describes a couple of ways to portably create Windows Dynamic
+Link Libraries (DLLs).  Libtool knows how to create DLLs using GNU tools
+and using Microsoft tools.
+
+   A typical library has a "hidden" implementation with an interface
+described in a header file.  On just about every system, the interface
+could be something like this:
+
+   Example `foo.h':
+
+     #ifndef FOO_H
+     #define FOO_H
+
+     int one (void);
+     int two (void);
+     extern int three;
+
+     #endif /* FOO_H */
+
+And the implementation could be something like this:
+
+   Example `foo.c':
+
+     #include "foo.h"
+
+     int one (void)
+     {
+       return 1;
+     }
+
+     int two (void)
+     {
+       return three - one ();
+     }
+
+     int three = 3;
+
+   When using contemporary GNU tools to create the Windows DLL, the
+above code will work there too, thanks to its auto-import/auto-export
+features.  But that is not the case when using older GNU tools or
+perhaps more interestingly when using proprietary tools.  In those
+cases the code will need additional decorations on the interface
+symbols with `__declspec(dllimport)' and `__declspec(dllexport)'
+depending on whether the library is built or it's consumed and how it's
+built and consumed.  However, it should be noted that it would have
+worked also with Microsoft tools, if only the variable `three' hadn't
+been there, due to the fact the Microsoft tools will automatically
+import functions (but sadly not variables) and Libtool will
+automatically export non-static symbols as described next.
+
+   With Microsoft tools, Libtool digs through the object files that
+make up the library, looking for non-static symbols to automatically
+export.  I.e., Libtool with Microsoft tools tries to mimic the
+auto-export feature of contemporary GNU tools.  It should be noted that
+the GNU auto-export feature is turned off when an explicit
+`__declspec(dllexport)' is seen.  The GNU tools do this to not make
+more symbols visible for projects that have already taken the trouble
+to decorate symbols.  There is no similar way to limit which symbols
+are visible in the code when Libtool is using Microsoft tools.  In
+order to limit symbol visibility in that case you need to use one of
+the options `-export-symbols' or `-export-symbols-regex'.
+
+   No matching help with auto-import is provided by Libtool, which is
+why variables must be decorated to import them from a DLL for
+everything but contemporary GNU tools.  As stated above, functions are
+automatically imported by both contemporary GNU tools and Microsoft
+tools, but for other proprietary tools the auto-import status of
+functions is unknown.
+
+   When the objects that form the library are built, there are generally
+two copies built for each object.  One copy is used when linking the DLL
+and one copy is used for the static library.  On Windows systems, a pair
+of defines are commonly used to discriminate how the interface symbols
+should be decorated.  The first define is `-DDLL_EXPORT' which is
+automatically provided by Libtool when `libtool' builds the copy of the
+object that is destined for the DLL.  The second define is
+`-DLIBFOO_BUILD' (or similar) which is often added by the package
+providing the library and is used when building the library, but not
+when consuming the library.
+
+   However, the matching double compile is not performed when consuming
+libraries.  It is therefore not possible to reliably distinguish if the
+consumer is importing from a DLL or if it is going to use a static
+library.
+
+   With contemporary GNU tools, auto-import often saves the day, but see
+the GNU ld documentation and its `--enable-auto-import' option for some
+corner cases when it does not (*note `--enable-auto-import':
+(ld)Options.).
+
+   With Microsoft tools you typically get away with always compiling the
+code such that variables are expected to be imported from a DLL and
+functions are expected to be found in a static library.  The tools will
+then automatically import the function from a DLL if that is where they
+are found.  If the variables are not imported from a DLL as expected,
+but are found in a static library that is otherwise pulled in by some
+function, the linker will issue a warning (LNK4217) that a locally
+defined symbol is imported, but it still works.  In other words, this
+scheme will not work to only consume variables from a library.  There is
+also a price connected to this liberal use of imports in that an extra
+indirection is introduced when you are consuming the static version of
+the library.  That extra indirection is unavoidable when the DLL is
+consumed, but it is not needed when consuming the static library.
+
+   For older GNU tools and other proprietary tools there is no generic
+way to make it possible to consume either of the DLL or the static
+library without user intervention, the tools need to be told what is
+intended.  One common assumption is that if a DLL is being built
+(`DLL_EXPORT' is defined) then that DLL is going to consume any
+dependent libraries as DLLs.  If that assumption is made everywhere, it
+is possible to select how an end-user application is consuming
+libraries by adding a single flag `-DDLL_EXPORT' when a DLL build is
+required.  This is of course an all or nothing deal, either everything
+as DLLs or everything as static libraries.
+
+   To sum up the above, the header file of the foo library needs to be
+changed into something like this:
+
+   Modified `foo.h':
+
+     #ifndef FOO_H
+     #define FOO_H
+
+     #if defined _WIN32 && !defined __GNUC__
+     # ifdef LIBFOO_BUILD
+     #  ifdef DLL_EXPORT
+     #   define LIBFOO_SCOPE            __declspec (dllexport)
+     #   define LIBFOO_SCOPE_VAR extern __declspec (dllexport)
+     #  endif
+     # elif defined _MSC_VER
+     #  define LIBFOO_SCOPE
+     #  define LIBFOO_SCOPE_VAR  extern __declspec (dllimport)
+     # elif defined DLL_EXPORT
+     #  define LIBFOO_SCOPE             __declspec (dllimport)
+     #  define LIBFOO_SCOPE_VAR  extern __declspec (dllimport)
+     # endif
+     #endif
+     #ifndef LIBFOO_SCOPE
+     # define LIBFOO_SCOPE
+     # define LIBFOO_SCOPE_VAR extern
+     #endif
+
+     LIBFOO_SCOPE     int one (void);
+     LIBFOO_SCOPE     int two (void);
+     LIBFOO_SCOPE_VAR int three;
+
+     #endif /* FOO_H */
+
+   When the targets are limited to contemporary GNU tools and Microsoft
+tools, the above can be simplified to the following:
+
+   Simplified `foo.h':
+
+     #ifndef FOO_H
+     #define FOO_H
+
+     #if defined _WIN32 && !defined __GNUC__ && !defined LIBFOO_BUILD
+     # define LIBFOO_SCOPE_VAR extern __declspec (dllimport)
+     #else
+     # define LIBFOO_SCOPE_VAR extern
+     #endif
+
+     int one (void);
+     int two (void);
+     LIBFOO_SCOPE_VAR int three;
+
+     #endif /* FOO_H */
+
+   This last simplified version can of course only work when Libtool is
+used to build the DLL, as no symbols would be exported otherwise (i.e.,
+when using Microsoft tools).
+
+   It should be noted that there are various projects that attempt to
+relax these requirements by various low level tricks, but they are not
+discussed here.  Examples are FlexDLL
+(http://alain.frisch.fr/flexdll.html) and edll
+(http://edll.sourceforge.net/).
+
+
+File: libtool.info,  Node: libtool script contents,  Next: Cheap tricks,  Prev: Platform quirks,  Up: Maintaining
+
+15.4 `libtool' script contents
+==============================
+
+Since version 1.4, the `libtool' script is generated by `configure'
+(*note Configuring::).  In earlier versions, `configure' achieved this
+by calling a helper script called `ltconfig'.  From libtool version 0.7
+to 1.0, this script simply set shell variables, then sourced the
+libtool backend, `ltmain.sh'.  `ltconfig' from libtool version 1.1
+through 1.3 inlined the contents of `ltmain.sh' into the generated
+`libtool', which improved performance on many systems.  The tests that
+`ltconfig' used to perform are now kept in `libtool.m4' where they can
+be written using Autoconf.  This has the runtime performance benefits
+of inlined `ltmain.sh', _and_ improves the build time a little while
+considerably easing the amount of raw shell code that used to need
+maintaining.
+
+   The convention used for naming variables that hold shell commands for
+delayed evaluation, is to use the suffix `_cmd' where a single line of
+valid shell script is needed, and the suffix `_cmds' where multiple
+lines of shell script *may* be delayed for later evaluation.  By
+convention, `_cmds' variables delimit the evaluation units with the `~'
+character where necessary.
+
+   Here is a listing of each of the configuration variables, and how
+they are used within `ltmain.sh' (*note Configuring::):
+
+ -- Variable: AR
+     The name of the system library archiver.
+
+ -- Variable: CC
+     The name of the compiler used to configure libtool.  This will
+     always contain the compiler for the current language (*note
+     Tags::).
+
+ -- Variable: ECHO
+     An `echo' program that does not interpret backslashes as an escape
+     character.  It may be given only one argument, so due quoting is
+     necessary.
+
+ -- Variable: LD
+     The name of the linker that libtool should use internally for
+     reloadable linking and possibly shared libraries.
+
+ -- Variable: LTCC
+ -- Variable: LTCFLAGS
+     The name of the C compiler and C compiler flags used to configure
+     libtool.
+
+ -- Variable: NM
+     The name of a BSD- or MS-compatible program that produces listings
+     of global symbols.  For BSD `nm', the symbols should be in one the
+     following formats:
+
+          ADDRESS C GLOBAL-VARIABLE-NAME
+          ADDRESS D GLOBAL-VARIABLE-NAME
+          ADDRESS T GLOBAL-FUNCTION-NAME
+
+     For MS `dumpbin', the symbols should be in one of the following
+     formats:
+
+          COUNTER SIZE    UNDEF    notype       External     | GLOBAL-VAR
+          COUNTER ADDRESS SECTION  notype       External     | GLOBAL-VAR
+          COUNTER ADDRESS SECTION  notype ()    External     | GLOBAL-FUNC
+
+     The SIZE of the global variables are not zero and the SECTION of
+     the global functions are not "UNDEF". Symbols in "pick any"
+     sections ("pick any" appears in the section header) are not global
+     either.
+
+ -- Variable: RANLIB
+     Set to the name of the `ranlib' program, if any.
+
+ -- Variable: allow_undefined_flag
+     The flag that is used by `archive_cmds' in order to declare that
+     there will be unresolved symbols in the resulting shared library.
+     Empty, if no such flag is required.  Set to `unsupported' if there
+     is no way to generate a shared library with references to symbols
+     that aren't defined in that library.
+
+ -- Variable: always_export_symbols
+     Whether libtool should automatically generate a list of exported
+     symbols using `export_symbols_cmds' before linking an archive.
+     Set to `yes' or `no'.  Default is `no'.
+
+ -- Variable: archive_cmds
+ -- Variable: archive_expsym_cmds
+ -- Variable: old_archive_cmds
+     Commands used to create shared libraries, shared libraries with
+     `-export-symbols' and static libraries, respectively.
+
+ -- Variable: archiver_list_spec
+     Specify filename containing input files for `AR'.
+
+ -- Variable: old_archive_from_new_cmds
+     If the shared library depends on a static library,
+     `old_archive_from_new_cmds' contains the commands used to create
+     that static library.  If this variable is not empty,
+     `old_archive_cmds' is not used.
+
+ -- Variable: old_archive_from_expsyms_cmds
+     If a static library must be created from the export symbol list in
+     order to correctly link with a shared library,
+     `old_archive_from_expsyms_cmds' contains the commands needed to
+     create that static library.  When these commands are executed, the
+     variable `soname' contains the name of the shared library in
+     question, and the `$objdir/$newlib' contains the path of the
+     static library these commands should build.  After executing these
+     commands, libtool will proceed to link against `$objdir/$newlib'
+     instead of `soname'.
+
+ -- Variable: lock_old_archive_extraction
+     Set to `yes' if the extraction of a static library requires locking
+     the library file.  This is required on Darwin.
+
+ -- Variable: build
+ -- Variable: build_alias
+ -- Variable: build_os
+     Set to the specified and canonical names of the system that
+     libtool was built on.
+
+ -- Variable: build_libtool_libs
+     Whether libtool should build shared libraries on this system.  Set
+     to `yes' or `no'.
+
+ -- Variable: build_old_libs
+     Whether libtool should build static libraries on this system.  Set
+     to `yes' or `no'.
+
+ -- Variable: compiler_c_o
+     Whether the compiler supports the `-c' and `-o' options
+     simultaneously.  Set to `yes' or `no'.
+
+ -- Variable: compiler_needs_object
+     Whether the compiler has to see an object listed on the command
+     line in order to successfully invoke the linker.  If `no', then a
+     set of convenience archives or a set of object file names can be
+     passed via linker-specific options or linker scripts.
+
+ -- Variable: dlopen_support
+     Whether `dlopen' is supported on the platform.  Set to `yes' or
+     `no'.
+
+ -- Variable: dlopen_self
+     Whether it is possible to `dlopen' the executable itself.  Set to
+     `yes' or `no'.
+
+ -- Variable: dlopen_self_static
+     Whether it is possible to `dlopen' the executable itself, when it
+     is linked statically (`-all-static').  Set to `yes' or `no'.
+
+ -- Variable: exclude_expsyms
+     List of symbols that should not be listed in the preloaded symbols.
+
+ -- Variable: export_dynamic_flag_spec
+     Compiler link flag that allows a dlopened shared library to
+     reference symbols that are defined in the program.
+
+ -- Variable: export_symbols_cmds
+     Commands to extract exported symbols from `libobjs' to the file
+     `export_symbols'.
+
+ -- Variable: extract_expsyms_cmds
+     Commands to extract the exported symbols list from a shared
+     library.  These commands are executed if there is no file
+     `$objdir/$soname-def', and should write the names of the exported
+     symbols to that file, for the use of
+     `old_archive_from_expsyms_cmds'.
+
+ -- Variable: fast_install
+     Determines whether libtool will privilege the installer or the
+     developer.  The assumption is that installers will seldom run
+     programs in the build tree, and the developer will seldom install.
+     This is only meaningful on platforms where
+     `shlibpath_overrides_runpath' is not `yes', so `fast_install' will
+     be set to `needless' in this case.  If `fast_install' set to
+     `yes', libtool will create programs that search for installed
+     libraries, and, if a program is run in the build tree, a new copy
+     will be linked on-demand to use the yet-to-be-installed libraries.
+     If set to `no', libtool will create programs that use the
+     yet-to-be-installed libraries, and will link a new copy of the
+     program at install time.  The default value is `yes' or
+     `needless', depending on platform and configuration flags, and it
+     can be turned from `yes' to `no' with the configure flag
+     `--disable-fast-install'.
+
+     On some systems, the linker always hardcodes paths to dependent
+     libraries into the output.  In this case, `fast_install' is never
+     set to `yes', and relinking at install time is triggered.  This
+     also means that `DESTDIR' installation does not work as expected.
+
+ -- Variable: file_magic_glob
+     How to find potential files when `deplibs_check_method' is
+     `file_magic'. `file_magic_glob' is a `sed' expression, and the
+     `sed' instance is fed potential file names that are transformed by
+     the `file_magic_glob' expression. Useful when the shell does not
+     support the shell option `nocaseglob', making `want_nocaseglob'
+     inappropriate. Normally disabled (i.e.  `file_magic_glob' is
+     empty).
+
+ -- Variable: finish_cmds
+     Commands to tell the dynamic linker how to find shared libraries
+     in a specific directory.
+
+ -- Variable: finish_eval
+     Same as `finish_cmds', except the commands are not displayed.
+
+ -- Variable: global_symbol_pipe
+     A pipeline that takes the output of `NM', and produces a listing of
+     raw symbols followed by their C names.  For example:
+
+          $ eval "$NM progname | $global_symbol_pipe"
+          D SYMBOL1 C-SYMBOL1
+          T SYMBOL2 C-SYMBOL2
+          C SYMBOL3 C-SYMBOL3
+          ...
+          $
+
+     The first column contains the symbol type (used to tell data from
+     code) but its meaning is system dependent.
+
+ -- Variable: global_symbol_to_cdecl
+     A pipeline that translates the output of `global_symbol_pipe' into
+     proper C declarations.  Since some platforms, such as HP/UX, have
+     linkers that differentiate code from data, data symbols are
+     declared as data, and code symbols are declared as functions.
+
+ -- Variable: hardcode_action
+     Either `immediate' or `relink', depending on whether shared
+     library paths can be hardcoded into executables before they are
+     installed, or if they need to be relinked.
+
+ -- Variable: hardcode_direct
+     Set to `yes' or `no', depending on whether the linker hardcodes
+     directories if a library is directly specified on the command line
+     (such as `DIR/libNAME.a') when `hardcode_libdir_flag_spec' is
+     specified.
+
+ -- Variable: hardcode_direct_absolute
+     Some architectures hardcode "absolute" library directories that
+     can not be overridden by `shlibpath_var' when `hardcode_direct' is
+     `yes'.  In that case set `hardcode_direct_absolute' to `yes', or
+     otherwise `no'.
+
+ -- Variable: hardcode_into_libs
+     Whether the platform supports hardcoding of run-paths into
+     libraries.  If enabled, linking of programs will be much simpler
+     but libraries will need to be relinked during installation.  Set
+     to `yes' or `no'.
+
+ -- Variable: hardcode_libdir_flag_spec
+     Flag to hardcode a `libdir' variable into a binary, so that the
+     dynamic linker searches `libdir' for shared libraries at runtime.
+     If it is empty, libtool will try to use some other hardcoding
+     mechanism.
+
+ -- Variable: hardcode_libdir_separator
+     If the compiler only accepts a single `hardcode_libdir_flag', then
+     this variable contains the string that should separate multiple
+     arguments to that flag.
+
+ -- Variable: hardcode_minus_L
+     Set to `yes' or `no', depending on whether the linker hardcodes
+     directories specified by `-L' flags into the resulting executable
+     when `hardcode_libdir_flag_spec' is specified.
+
+ -- Variable: hardcode_shlibpath_var
+     Set to `yes' or `no', depending on whether the linker hardcodes
+     directories by writing the contents of `$shlibpath_var' into the
+     resulting executable when `hardcode_libdir_flag_spec' is
+     specified.  Set to `unsupported' if directories specified by
+     `$shlibpath_var' are searched at run time, but not at link time.
+
+ -- Variable: host
+ -- Variable: host_alias
+ -- Variable: host_os
+     Set to the specified and canonical names of the system that
+     libtool was configured for.
+
+ -- Variable: include_expsyms
+     List of symbols that must always be exported when using
+     `export_symbols'.
+
+ -- Variable: inherit_rpath
+     Whether the linker adds runtime paths of dependency libraries to
+     the runtime path list, requiring libtool to relink the output when
+     installing.  Set to `yes' or `no'.  Default is `no'.
+
+ -- Variable: install_override_mode
+     Permission mode override for installation of shared libraries.  If
+     the runtime linker fails to load libraries with wrong permissions,
+     then it may fail to execute programs that are needed during
+     installation, because these need the library that has just been
+     installed.  In this case, it is necessary to pass the mode to
+     `install' with `-m INSTALL_OVERRIDE_MODE'.
+
+ -- Variable: libext
+     The standard old archive suffix (normally `a').
+
+ -- Variable: libname_spec
+     The format of a library name prefix.  On all Unix systems, static
+     libraries are called `libNAME.a', but on some systems (such as
+     OS/2 or MS-DOS), the library is just called `NAME.a'.
+
+ -- Variable: library_names_spec
+     A list of shared library names.  The first is the name of the file,
+     the rest are symbolic links to the file.  The name in the list is
+     the file name that the linker finds when given `-lNAME'.
+
+ -- Variable: link_all_deplibs
+     Whether libtool must link a program against all its dependency
+     libraries.  Set to `yes' or `no'.  Default is `unknown', which is
+     a synonym for `yes'.
+
+ -- Variable: link_static_flag
+     Linker flag (passed through the C compiler) used to prevent dynamic
+     linking.
+
+ -- Variable: macro_version
+ -- Variable: macro_revision
+     The release and revision from which the libtool.m4 macros were
+     taken.  This is used to ensure that macros and `ltmain.sh'
+     correspond to the same Libtool version.
+
+ -- Variable: max_cmd_len
+     The approximate longest command line that can be passed to `$SHELL'
+     without being truncated, as computed by `LT_CMD_MAX_LEN'.
+
+ -- Variable: need_lib_prefix
+     Whether we can `dlopen' modules without a `lib' prefix.  Set to
+     `yes' or `no'.  By default, it is `unknown', which means the same
+     as `yes', but documents that we are not really sure about it.
+     `no' means that it is possible to `dlopen' a module without the
+     `lib' prefix.
+
+ -- Variable: need_version
+     Whether versioning is required for libraries, i.e. whether the
+     dynamic linker requires a version suffix for all libraries.  Set
+     to `yes' or `no'.  By default, it is `unknown', which means the
+     same as `yes', but documents that we are not really sure about it.
+
+ -- Variable: need_locks
+     Whether files must be locked to prevent conflicts when compiling
+     simultaneously.  Set to `yes' or `no'.
+
+ -- Variable: nm_file_list_spec
+     Specify filename containing input files for `NM'.
+
+ -- Variable: no_builtin_flag
+     Compiler flag to disable builtin functions that conflict with
+     declaring external global symbols as `char'.
+
+ -- Variable: no_undefined_flag
+     The flag that is used by `archive_cmds' in order to declare that
+     there will be no unresolved symbols in the resulting shared
+     library.  Empty, if no such flag is required.
+
+ -- Variable: objdir
+     The name of the directory that contains temporary libtool files.
+
+ -- Variable: objext
+     The standard object file suffix (normally `o').
+
+ -- Variable: pic_flag
+     Any additional compiler flags for building library object files.
+
+ -- Variable: postinstall_cmds
+ -- Variable: old_postinstall_cmds
+     Commands run after installing a shared or static library,
+     respectively.
+
+ -- Variable: postuninstall_cmds
+ -- Variable: old_postuninstall_cmds
+     Commands run after uninstalling a shared or static library,
+     respectively.
+
+ -- Variable: postlink_cmds
+     Commands necessary for finishing linking programs. `postlink_cmds'
+     are executed immediately after the program is linked.  Any
+     occurrence of the string `@OUTPUT@' in `postlink_cmds' is replaced
+     by the name of the created executable (i.e. not the wrapper, if a
+     wrapper is generated) prior to execution.  Similarly,
+     `@TOOL_OUTPUT@' is replaced by the toolchain format of `@OUTPUT@'.
+     Normally disabled (i.e. `postlink_cmds' empty).
+
+ -- Variable: reload_cmds
+ -- Variable: reload_flag
+     Commands to create a reloadable object.  Set `reload_cmds' to
+     `false' on systems that cannot create reloadable objects.
+
+ -- Variable: runpath_var
+     The environment variable that tells the linker which directories to
+     hardcode in the resulting executable.
+
+ -- Variable: shlibpath_overrides_runpath
+     Indicates whether it is possible to override the hard-coded library
+     search path of a program with an environment variable.  If this is
+     set to no, libtool may have to create two copies of a program in
+     the build tree, one to be installed and one to be run in the build
+     tree only.  When each of these copies is created depends on the
+     value of `fast_install'.  The default value is `unknown', which is
+     equivalent to `no'.
+
+ -- Variable: shlibpath_var
+     The environment variable that tells the dynamic linker where to
+     find shared libraries.
+
+ -- Variable: soname_spec
+     The name coded into shared libraries, if different from the real
+     name of the file.
+
+ -- Variable: striplib
+ -- Variable: old_striplib
+     Command to strip a shared (`striplib') or static (`old_striplib')
+     library, respectively.  If these variables are empty, the strip
+     flag in the install mode will be ignored for libraries (*note
+     Install mode::).
+
+ -- Variable: sys_lib_dlsearch_path_spec
+     Expression to get the run-time system library search path.
+     Directories that appear in this list are never hard-coded into
+     executables.
+
+ -- Variable: sys_lib_search_path_spec
+     Expression to get the compile-time system library search path.
+     This variable is used by libtool when it has to test whether a
+     certain library is shared or static.  The directories listed in
+     `shlibpath_var' are automatically appended to this list, every time
+     libtool runs (i.e., not at configuration time), because some
+     linkers use this variable to extend the library search path.
+     Linker switches such as `-L' also augment the search path.
+
+ -- Variable: thread_safe_flag_spec
+     Linker flag (passed through the C compiler) used to generate
+     thread-safe libraries.
+
+ -- Variable: to_host_file_cmd
+     If the toolchain is not native to the build platform (e.g. if you
+     are using MSYS to drive the scripting, but are using the MinGW
+     native Windows compiler) this variable describes how to convert
+     file names from the format used by the build platform to the
+     format used by host platform.  Normally set to
+     `func_convert_file_noop', libtool will autodetect most cases in
+     which other values should be used.  On rare occasions, it may be
+     necessary to override the autodetected value (*note Cygwin to
+     MinGW Cross::).
+
+ -- Variable: to_tool_file_cmd
+     If the toolchain is not native to the build platform (e.g. if you
+     are using some Unix to drive the scripting together with a Windows
+     toolchain running in Wine) this variable describes how to convert
+     file names from the format used by the build platform to the
+     format used by the toolchain.  Normally set to
+     `func_convert_file_noop'.
+
+ -- Variable: version_type
+     The library version numbering type.  One of `libtool',
+     `freebsd-aout', `freebsd-elf', `irix', `linux', `osf', `sunos',
+     `windows', or `none'.
+
+ -- Variable: want_nocaseglob
+     Find potential files using the shell option `nocaseglob', when
+     `deplibs_check_method' is `file_magic'. Normally set to `no'. Set
+     to `yes' to enable the `nocaseglob' shell option when looking for
+     potential file names in a case-insensitive manner.
+
+ -- Variable: whole_archive_flag_spec
+     Compiler flag to generate shared objects from convenience archives.
+
+ -- Variable: wl
+     The C compiler flag that allows libtool to pass a flag directly to
+     the linker.  Used as: `${wl}SOME-FLAG'.
+
+   Variables ending in `_cmds' or `_eval' contain a `~'-separated list
+of commands that are `eval'ed one after another.  If any of the
+commands return a nonzero exit status, libtool generally exits with an
+error message.
+
+   Variables ending in `_spec' are `eval'ed before being used by
+libtool.
+
+
+File: libtool.info,  Node: Cheap tricks,  Prev: libtool script contents,  Up: Maintaining
+
+15.5 Cheap tricks
+=================
+
+Here are a few tricks that you can use in order to make maintainership
+easier:
+
+   * When people report bugs, ask them to use the `--config',
+     `--debug', or `--features' flags, if you think they will help you.
+     These flags are there to help you get information directly, rather
+     than having to trust second-hand observation.
+
+   * Rather than reconfiguring libtool every time I make a change to
+     `ltmain.in', I keep a permanent `libtool' script in my `PATH',
+     which sources `ltmain.in' directly.
+
+     The following steps describe how to create such a script, where
+     `/home/src/libtool' is the directory containing the libtool source
+     tree, `/home/src/libtool/libtool' is a libtool script that has been
+     configured for your platform, and `~/bin' is a directory in your
+     `PATH':
+
+          trick$ cd ~/bin
+          trick$ sed 's%^\(macro_version=\).*$%\1@VERSION@%;
+                      s%^\(macro_revision=\).*$%\1@package_revision@%;
+                      /^# ltmain\.sh/q' /home/src/libtool/libtool > libtool
+          trick$ echo '. /home/src/libtool/ltmain.in' >> libtool
+          trick$ chmod +x libtool
+          trick$ libtool --version
+          ltmain.sh (GNU @PACKAGE@@TIMESTAMP@) @VERSION@
+
+          Copyright (C) 2011 Free Software Foundation, Inc.
+          This is free software; see the source for copying conditions.  There is NO
+          warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+          trick$
+
+   The output of the final `libtool --version' command shows that the
+`ltmain.in' script is being used directly.  Now, modify `~/bin/libtool'
+or `/home/src/libtool/ltmain.in' directly in order to test new changes
+without having to rerun `configure'.
+
diff --git a/doc/libtool.info-2 b/doc/libtool.info-2
new file mode 100644
index 0000000..607fef5
--- /dev/null
+++ b/doc/libtool.info-2
@@ -0,0 +1,1227 @@
+This is doc/libtool.info, produced by makeinfo version 4.13 from
+./doc/libtool.texi.
+
+INFO-DIR-SECTION GNU programming tools
+START-INFO-DIR-ENTRY
+* Libtool: (libtool).           Generic shared library support script.
+END-INFO-DIR-ENTRY
+
+INFO-DIR-SECTION Individual utilities
+START-INFO-DIR-ENTRY
+* libtool-invocation: (libtool)Invoking libtool.
+                                                Running the `libtool' script.
+* libtoolize: (libtool)Invoking libtoolize.     Adding libtool support.
+END-INFO-DIR-ENTRY
+
+   This file documents GNU Libtool 2.4.2
+
+   Copyright (C) 1996-2011 Free Software Foundation, Inc.
+
+   Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3 or
+any later version published by the Free Software Foundation; with no
+Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
+Texts.  A copy of the license is included in the section entitled "GNU
+Free Documentation License".
+
+
+File: libtool.info,  Node: GNU Free Documentation License,  Next: Combined Index,  Prev: Maintaining,  Up: Top
+
+Appendix A GNU Free Documentation License
+*****************************************
+
+                     Version 1.3, 3 November 2008
+
+     Copyright (C) 2000, 2001, 2002, 2007, 2008 Free Software Foundation, Inc.
+     `http://fsf.org/'
+
+     Everyone is permitted to copy and distribute verbatim copies
+     of this license document, but changing it is not allowed.
+
+  0. PREAMBLE
+
+     The purpose of this License is to make a manual, textbook, or other
+     functional and useful document "free" in the sense of freedom: to
+     assure everyone the effective freedom to copy and redistribute it,
+     with or without modifying it, either commercially or
+     noncommercially.  Secondarily, this License preserves for the
+     author and publisher a way to get credit for their work, while not
+     being considered responsible for modifications made by others.
+
+     This License is a kind of "copyleft", which means that derivative
+     works of the document must themselves be free in the same sense.
+     It complements the GNU General Public License, which is a copyleft
+     license designed for free software.
+
+     We have designed this License in order to use it for manuals for
+     free software, because free software needs free documentation: a
+     free program should come with manuals providing the same freedoms
+     that the software does.  But this License is not limited to
+     software manuals; it can be used for any textual work, regardless
+     of subject matter or whether it is published as a printed book.
+     We recommend this License principally for works whose purpose is
+     instruction or reference.
+
+  1. APPLICABILITY AND DEFINITIONS
+
+     This License applies to any manual or other work, in any medium,
+     that contains a notice placed by the copyright holder saying it
+     can be distributed under the terms of this License.  Such a notice
+     grants a world-wide, royalty-free license, unlimited in duration,
+     to use that work under the conditions stated herein.  The
+     "Document", below, refers to any such manual or work.  Any member
+     of the public is a licensee, and is addressed as "you".  You
+     accept the license if you copy, modify or distribute the work in a
+     way requiring permission under copyright law.
+
+     A "Modified Version" of the Document means any work containing the
+     Document or a portion of it, either copied verbatim, or with
+     modifications and/or translated into another language.
+
+     A "Secondary Section" is a named appendix or a front-matter section
+     of the Document that deals exclusively with the relationship of the
+     publishers or authors of the Document to the Document's overall
+     subject (or to related matters) and contains nothing that could
+     fall directly within that overall subject.  (Thus, if the Document
+     is in part a textbook of mathematics, a Secondary Section may not
+     explain any mathematics.)  The relationship could be a matter of
+     historical connection with the subject or with related matters, or
+     of legal, commercial, philosophical, ethical or political position
+     regarding them.
+
+     The "Invariant Sections" are certain Secondary Sections whose
+     titles are designated, as being those of Invariant Sections, in
+     the notice that says that the Document is released under this
+     License.  If a section does not fit the above definition of
+     Secondary then it is not allowed to be designated as Invariant.
+     The Document may contain zero Invariant Sections.  If the Document
+     does not identify any Invariant Sections then there are none.
+
+     The "Cover Texts" are certain short passages of text that are
+     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
+     that says that the Document is released under this License.  A
+     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
+     be at most 25 words.
+
+     A "Transparent" copy of the Document means a machine-readable copy,
+     represented in a format whose specification is available to the
+     general public, that is suitable for revising the document
+     straightforwardly with generic text editors or (for images
+     composed of pixels) generic paint programs or (for drawings) some
+     widely available drawing editor, and that is suitable for input to
+     text formatters or for automatic translation to a variety of
+     formats suitable for input to text formatters.  A copy made in an
+     otherwise Transparent file format whose markup, or absence of
+     markup, has been arranged to thwart or discourage subsequent
+     modification by readers is not Transparent.  An image format is
+     not Transparent if used for any substantial amount of text.  A
+     copy that is not "Transparent" is called "Opaque".
+
+     Examples of suitable formats for Transparent copies include plain
+     ASCII without markup, Texinfo input format, LaTeX input format,
+     SGML or XML using a publicly available DTD, and
+     standard-conforming simple HTML, PostScript or PDF designed for
+     human modification.  Examples of transparent image formats include
+     PNG, XCF and JPG.  Opaque formats include proprietary formats that
+     can be read and edited only by proprietary word processors, SGML or
+     XML for which the DTD and/or processing tools are not generally
+     available, and the machine-generated HTML, PostScript or PDF
+     produced by some word processors for output purposes only.
+
+     The "Title Page" means, for a printed book, the title page itself,
+     plus such following pages as are needed to hold, legibly, the
+     material this License requires to appear in the title page.  For
+     works in formats which do not have any title page as such, "Title
+     Page" means the text near the most prominent appearance of the
+     work's title, preceding the beginning of the body of the text.
+
+     The "publisher" means any person or entity that distributes copies
+     of the Document to the public.
+
+     A section "Entitled XYZ" means a named subunit of the Document
+     whose title either is precisely XYZ or contains XYZ in parentheses
+     following text that translates XYZ in another language.  (Here XYZ
+     stands for a specific section name mentioned below, such as
+     "Acknowledgements", "Dedications", "Endorsements", or "History".)
+     To "Preserve the Title" of such a section when you modify the
+     Document means that it remains a section "Entitled XYZ" according
+     to this definition.
+
+     The Document may include Warranty Disclaimers next to the notice
+     which states that this License applies to the Document.  These
+     Warranty Disclaimers are considered to be included by reference in
+     this License, but only as regards disclaiming warranties: any other
+     implication that these Warranty Disclaimers may have is void and
+     has no effect on the meaning of this License.
+
+  2. VERBATIM COPYING
+
+     You may copy and distribute the Document in any medium, either
+     commercially or noncommercially, provided that this License, the
+     copyright notices, and the license notice saying this License
+     applies to the Document are reproduced in all copies, and that you
+     add no other conditions whatsoever to those of this License.  You
+     may not use technical measures to obstruct or control the reading
+     or further copying of the copies you make or distribute.  However,
+     you may accept compensation in exchange for copies.  If you
+     distribute a large enough number of copies you must also follow
+     the conditions in section 3.
+
+     You may also lend copies, under the same conditions stated above,
+     and you may publicly display copies.
+
+  3. COPYING IN QUANTITY
+
+     If you publish printed copies (or copies in media that commonly
+     have printed covers) of the Document, numbering more than 100, and
+     the Document's license notice requires Cover Texts, you must
+     enclose the copies in covers that carry, clearly and legibly, all
+     these Cover Texts: Front-Cover Texts on the front cover, and
+     Back-Cover Texts on the back cover.  Both covers must also clearly
+     and legibly identify you as the publisher of these copies.  The
+     front cover must present the full title with all words of the
+     title equally prominent and visible.  You may add other material
+     on the covers in addition.  Copying with changes limited to the
+     covers, as long as they preserve the title of the Document and
+     satisfy these conditions, can be treated as verbatim copying in
+     other respects.
+
+     If the required texts for either cover are too voluminous to fit
+     legibly, you should put the first ones listed (as many as fit
+     reasonably) on the actual cover, and continue the rest onto
+     adjacent pages.
+
+     If you publish or distribute Opaque copies of the Document
+     numbering more than 100, you must either include a
+     machine-readable Transparent copy along with each Opaque copy, or
+     state in or with each Opaque copy a computer-network location from
+     which the general network-using public has access to download
+     using public-standard network protocols a complete Transparent
+     copy of the Document, free of added material.  If you use the
+     latter option, you must take reasonably prudent steps, when you
+     begin distribution of Opaque copies in quantity, to ensure that
+     this Transparent copy will remain thus accessible at the stated
+     location until at least one year after the last time you
+     distribute an Opaque copy (directly or through your agents or
+     retailers) of that edition to the public.
+
+     It is requested, but not required, that you contact the authors of
+     the Document well before redistributing any large number of
+     copies, to give them a chance to provide you with an updated
+     version of the Document.
+
+  4. MODIFICATIONS
+
+     You may copy and distribute a Modified Version of the Document
+     under the conditions of sections 2 and 3 above, provided that you
+     release the Modified Version under precisely this License, with
+     the Modified Version filling the role of the Document, thus
+     licensing distribution and modification of the Modified Version to
+     whoever possesses a copy of it.  In addition, you must do these
+     things in the Modified Version:
+
+       A. Use in the Title Page (and on the covers, if any) a title
+          distinct from that of the Document, and from those of
+          previous versions (which should, if there were any, be listed
+          in the History section of the Document).  You may use the
+          same title as a previous version if the original publisher of
+          that version gives permission.
+
+       B. List on the Title Page, as authors, one or more persons or
+          entities responsible for authorship of the modifications in
+          the Modified Version, together with at least five of the
+          principal authors of the Document (all of its principal
+          authors, if it has fewer than five), unless they release you
+          from this requirement.
+
+       C. State on the Title page the name of the publisher of the
+          Modified Version, as the publisher.
+
+       D. Preserve all the copyright notices of the Document.
+
+       E. Add an appropriate copyright notice for your modifications
+          adjacent to the other copyright notices.
+
+       F. Include, immediately after the copyright notices, a license
+          notice giving the public permission to use the Modified
+          Version under the terms of this License, in the form shown in
+          the Addendum below.
+
+       G. Preserve in that license notice the full lists of Invariant
+          Sections and required Cover Texts given in the Document's
+          license notice.
+
+       H. Include an unaltered copy of this License.
+
+       I. Preserve the section Entitled "History", Preserve its Title,
+          and add to it an item stating at least the title, year, new
+          authors, and publisher of the Modified Version as given on
+          the Title Page.  If there is no section Entitled "History" in
+          the Document, create one stating the title, year, authors,
+          and publisher of the Document as given on its Title Page,
+          then add an item describing the Modified Version as stated in
+          the previous sentence.
+
+       J. Preserve the network location, if any, given in the Document
+          for public access to a Transparent copy of the Document, and
+          likewise the network locations given in the Document for
+          previous versions it was based on.  These may be placed in
+          the "History" section.  You may omit a network location for a
+          work that was published at least four years before the
+          Document itself, or if the original publisher of the version
+          it refers to gives permission.
+
+       K. For any section Entitled "Acknowledgements" or "Dedications",
+          Preserve the Title of the section, and preserve in the
+          section all the substance and tone of each of the contributor
+          acknowledgements and/or dedications given therein.
+
+       L. Preserve all the Invariant Sections of the Document,
+          unaltered in their text and in their titles.  Section numbers
+          or the equivalent are not considered part of the section
+          titles.
+
+       M. Delete any section Entitled "Endorsements".  Such a section
+          may not be included in the Modified Version.
+
+       N. Do not retitle any existing section to be Entitled
+          "Endorsements" or to conflict in title with any Invariant
+          Section.
+
+       O. Preserve any Warranty Disclaimers.
+
+     If the Modified Version includes new front-matter sections or
+     appendices that qualify as Secondary Sections and contain no
+     material copied from the Document, you may at your option
+     designate some or all of these sections as invariant.  To do this,
+     add their titles to the list of Invariant Sections in the Modified
+     Version's license notice.  These titles must be distinct from any
+     other section titles.
+
+     You may add a section Entitled "Endorsements", provided it contains
+     nothing but endorsements of your Modified Version by various
+     parties--for example, statements of peer review or that the text
+     has been approved by an organization as the authoritative
+     definition of a standard.
+
+     You may add a passage of up to five words as a Front-Cover Text,
+     and a passage of up to 25 words as a Back-Cover Text, to the end
+     of the list of Cover Texts in the Modified Version.  Only one
+     passage of Front-Cover Text and one of Back-Cover Text may be
+     added by (or through arrangements made by) any one entity.  If the
+     Document already includes a cover text for the same cover,
+     previously added by you or by arrangement made by the same entity
+     you are acting on behalf of, you may not add another; but you may
+     replace the old one, on explicit permission from the previous
+     publisher that added the old one.
+
+     The author(s) and publisher(s) of the Document do not by this
+     License give permission to use their names for publicity for or to
+     assert or imply endorsement of any Modified Version.
+
+  5. COMBINING DOCUMENTS
+
+     You may combine the Document with other documents released under
+     this License, under the terms defined in section 4 above for
+     modified versions, provided that you include in the combination
+     all of the Invariant Sections of all of the original documents,
+     unmodified, and list them all as Invariant Sections of your
+     combined work in its license notice, and that you preserve all
+     their Warranty Disclaimers.
+
+     The combined work need only contain one copy of this License, and
+     multiple identical Invariant Sections may be replaced with a single
+     copy.  If there are multiple Invariant Sections with the same name
+     but different contents, make the title of each such section unique
+     by adding at the end of it, in parentheses, the name of the
+     original author or publisher of that section if known, or else a
+     unique number.  Make the same adjustment to the section titles in
+     the list of Invariant Sections in the license notice of the
+     combined work.
+
+     In the combination, you must combine any sections Entitled
+     "History" in the various original documents, forming one section
+     Entitled "History"; likewise combine any sections Entitled
+     "Acknowledgements", and any sections Entitled "Dedications".  You
+     must delete all sections Entitled "Endorsements."
+
+  6. COLLECTIONS OF DOCUMENTS
+
+     You may make a collection consisting of the Document and other
+     documents released under this License, and replace the individual
+     copies of this License in the various documents with a single copy
+     that is included in the collection, provided that you follow the
+     rules of this License for verbatim copying of each of the
+     documents in all other respects.
+
+     You may extract a single document from such a collection, and
+     distribute it individually under this License, provided you insert
+     a copy of this License into the extracted document, and follow
+     this License in all other respects regarding verbatim copying of
+     that document.
+
+  7. AGGREGATION WITH INDEPENDENT WORKS
+
+     A compilation of the Document or its derivatives with other
+     separate and independent documents or works, in or on a volume of
+     a storage or distribution medium, is called an "aggregate" if the
+     copyright resulting from the compilation is not used to limit the
+     legal rights of the compilation's users beyond what the individual
+     works permit.  When the Document is included in an aggregate, this
+     License does not apply to the other works in the aggregate which
+     are not themselves derivative works of the Document.
+
+     If the Cover Text requirement of section 3 is applicable to these
+     copies of the Document, then if the Document is less than one half
+     of the entire aggregate, the Document's Cover Texts may be placed
+     on covers that bracket the Document within the aggregate, or the
+     electronic equivalent of covers if the Document is in electronic
+     form.  Otherwise they must appear on printed covers that bracket
+     the whole aggregate.
+
+  8. TRANSLATION
+
+     Translation is considered a kind of modification, so you may
+     distribute translations of the Document under the terms of section
+     4.  Replacing Invariant Sections with translations requires special
+     permission from their copyright holders, but you may include
+     translations of some or all Invariant Sections in addition to the
+     original versions of these Invariant Sections.  You may include a
+     translation of this License, and all the license notices in the
+     Document, and any Warranty Disclaimers, provided that you also
+     include the original English version of this License and the
+     original versions of those notices and disclaimers.  In case of a
+     disagreement between the translation and the original version of
+     this License or a notice or disclaimer, the original version will
+     prevail.
+
+     If a section in the Document is Entitled "Acknowledgements",
+     "Dedications", or "History", the requirement (section 4) to
+     Preserve its Title (section 1) will typically require changing the
+     actual title.
+
+  9. TERMINATION
+
+     You may not copy, modify, sublicense, or distribute the Document
+     except as expressly provided under this License.  Any attempt
+     otherwise to copy, modify, sublicense, or distribute it is void,
+     and will automatically terminate your rights under this License.
+
+     However, if you cease all violation of this License, then your
+     license from a particular copyright holder is reinstated (a)
+     provisionally, unless and until the copyright holder explicitly
+     and finally terminates your license, and (b) permanently, if the
+     copyright holder fails to notify you of the violation by some
+     reasonable means prior to 60 days after the cessation.
+
+     Moreover, your license from a particular copyright holder is
+     reinstated permanently if the copyright holder notifies you of the
+     violation by some reasonable means, this is the first time you have
+     received notice of violation of this License (for any work) from
+     that copyright holder, and you cure the violation prior to 30 days
+     after your receipt of the notice.
+
+     Termination of your rights under this section does not terminate
+     the licenses of parties who have received copies or rights from
+     you under this License.  If your rights have been terminated and
+     not permanently reinstated, receipt of a copy of some or all of
+     the same material does not give you any rights to use it.
+
+ 10. FUTURE REVISIONS OF THIS LICENSE
+
+     The Free Software Foundation may publish new, revised versions of
+     the GNU Free Documentation License from time to time.  Such new
+     versions will be similar in spirit to the present version, but may
+     differ in detail to address new problems or concerns.  See
+     `http://www.gnu.org/copyleft/'.
+
+     Each version of the License is given a distinguishing version
+     number.  If the Document specifies that a particular numbered
+     version of this License "or any later version" applies to it, you
+     have the option of following the terms and conditions either of
+     that specified version or of any later version that has been
+     published (not as a draft) by the Free Software Foundation.  If
+     the Document does not specify a version number of this License,
+     you may choose any version ever published (not as a draft) by the
+     Free Software Foundation.  If the Document specifies that a proxy
+     can decide which future versions of this License can be used, that
+     proxy's public statement of acceptance of a version permanently
+     authorizes you to choose that version for the Document.
+
+ 11. RELICENSING
+
+     "Massive Multiauthor Collaboration Site" (or "MMC Site") means any
+     World Wide Web server that publishes copyrightable works and also
+     provides prominent facilities for anybody to edit those works.  A
+     public wiki that anybody can edit is an example of such a server.
+     A "Massive Multiauthor Collaboration" (or "MMC") contained in the
+     site means any set of copyrightable works thus published on the MMC
+     site.
+
+     "CC-BY-SA" means the Creative Commons Attribution-Share Alike 3.0
+     license published by Creative Commons Corporation, a not-for-profit
+     corporation with a principal place of business in San Francisco,
+     California, as well as future copyleft versions of that license
+     published by that same organization.
+
+     "Incorporate" means to publish or republish a Document, in whole or
+     in part, as part of another Document.
+
+     An MMC is "eligible for relicensing" if it is licensed under this
+     License, and if all works that were first published under this
+     License somewhere other than this MMC, and subsequently
+     incorporated in whole or in part into the MMC, (1) had no cover
+     texts or invariant sections, and (2) were thus incorporated prior
+     to November 1, 2008.
+
+     The operator of an MMC Site may republish an MMC contained in the
+     site under CC-BY-SA on the same site at any time before August 1,
+     2009, provided the MMC is eligible for relicensing.
+
+
+ADDENDUM: How to use this License for your documents
+====================================================
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and license
+notices just after the title page:
+
+       Copyright (C)  YEAR  YOUR NAME.
+       Permission is granted to copy, distribute and/or modify this document
+       under the terms of the GNU Free Documentation License, Version 1.3
+       or any later version published by the Free Software Foundation;
+       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
+       Texts.  A copy of the license is included in the section entitled ``GNU
+       Free Documentation License''.
+
+   If you have Invariant Sections, Front-Cover Texts and Back-Cover
+Texts, replace the "with...Texts." line with this:
+
+         with the Invariant Sections being LIST THEIR TITLES, with
+         the Front-Cover Texts being LIST, and with the Back-Cover Texts
+         being LIST.
+
+   If you have Invariant Sections without Cover Texts, or some other
+combination of the three, merge those two alternatives to suit the
+situation.
+
+   If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License, to
+permit their use in free software.
+
+
+File: libtool.info,  Node: Combined Index,  Prev: GNU Free Documentation License,  Up: Top
+
+Combined Index
+**************
+
+
+* Menu:
+
+* -no-suppress, libtool compile mode option: Creating object files.
+                                                              (line  92)
+* -weak option:                          Linking with dlopened modules.
+                                                              (line  94)
+* .la files:                             Linking libraries.   (line  24)
+* .libs subdirectory:                    Linking libraries.   (line  77)
+* .lo files:                             Creating object files.
+                                                              (line  28)
+* AC_CONFIG_AUX_DIR:                     Invoking libtoolize. (line 157)
+* AC_CONFIG_MACRO_DIR:                   Invoking libtoolize. (line 136)
+* AC_DISABLE_FAST_INSTALL:               LT_INIT.             (line 185)
+* AC_DISABLE_SHARED:                     LT_INIT.             (line 189)
+* AC_DISABLE_STATIC:                     LT_INIT.             (line 206)
+* AC_ENABLE_SHARED:                      LT_INIT.             (line 197)
+* AC_ENABLE_STATIC:                      LT_INIT.             (line 214)
+* AC_LIBLTDL_CONVENIENCE:                Distributing libltdl.
+                                                              (line 302)
+* AC_LIBLTDL_INSTALLABLE:                Distributing libltdl.
+                                                              (line 297)
+* AC_LIBTOOL_DLOPEN:                     LT_INIT.             (line 177)
+* AC_LIBTOOL_WIN32_DLL:                  LT_INIT.             (line 181)
+* AC_PROG_LIBTOOL:                       LT_INIT.             (line  22)
+* AC_WITH_LTDL:                          Distributing libltdl.
+                                                              (line  42)
+* aclocal:                               LT_INIT.             (line 322)
+* allow_undefined_flag:                  libtool script contents.
+                                                              (line  76)
+* always_export_symbols:                 libtool script contents.
+                                                              (line  83)
+* AM_DISABLE_SHARED:                     LT_INIT.             (line 190)
+* AM_DISABLE_STATIC:                     LT_INIT.             (line 207)
+* AM_ENABLE_SHARED:                      LT_INIT.             (line 198)
+* AM_ENABLE_STATIC:                      LT_INIT.             (line 215)
+* AM_PROG_LIBTOOL:                       LT_INIT.             (line  23)
+* application-level dynamic linking <1>: Dlopened modules.    (line   6)
+* application-level dynamic linking:     Using libltdl.       (line   6)
+* ar:                                    Linking libraries.   (line   6)
+* AR:                                    libtool script contents.
+                                                              (line  30)
+* archive_cmds:                          libtool script contents.
+                                                              (line  88)
+* archive_expsym_cmds:                   libtool script contents.
+                                                              (line  89)
+* archiver_list_spec:                    libtool script contents.
+                                                              (line  94)
+* AS:                                    LT_INIT.             (line 278)
+* autoconf traces:                       Trace interface.     (line   6)
+* avoiding shared libraries:             Static-only libraries.
+                                                              (line   6)
+* bug reports:                           Reporting bugs.      (line   6)
+* buggy system linkers:                  Linking executables. (line  11)
+* bugs, subtle ones caused by buggy linkers: Linking executables.
+                                                              (line  16)
+* build:                                 libtool script contents.
+                                                              (line 118)
+* build_alias:                           libtool script contents.
+                                                              (line 119)
+* build_libtool_libs:                    libtool script contents.
+                                                              (line 124)
+* build_old_libs:                        libtool script contents.
+                                                              (line 128)
+* build_os:                              libtool script contents.
+                                                              (line 120)
+* C header files, portable:              C header files.      (line   6)
+* C++, pitfalls:                         C++ libraries.       (line   6)
+* C++, using:                            Other languages.     (line   6)
+* C, not using:                          Other languages.     (line   6)
+* CC <1>:                                LT_INIT.             (line 228)
+* CC:                                    libtool script contents.
+                                                              (line  33)
+* cdemo-conf.test:                       Test descriptions.   (line  21)
+* cdemo-exec.test:                       Test descriptions.   (line  21)
+* cdemo-make.test:                       Test descriptions.   (line  21)
+* cdemo-shared-exec.test:                Test descriptions.   (line  21)
+* cdemo-shared-make.test:                Test descriptions.   (line  21)
+* cdemo-shared.test:                     Test descriptions.   (line  21)
+* cdemo-static-exec.test:                Test descriptions.   (line  21)
+* cdemo-static-make.test:                Test descriptions.   (line  21)
+* cdemo-static.test:                     Test descriptions.   (line  21)
+* cdemo-undef-exec.test:                 Test descriptions.   (line  21)
+* cdemo-undef-make.test:                 Test descriptions.   (line  21)
+* cdemo-undef.test:                      Test descriptions.   (line  21)
+* CFLAGS:                                LT_INIT.             (line 232)
+* check-interactive:                     Test descriptions.   (line 334)
+* check-noninteractive:                  Test descriptions.   (line 334)
+* clean mode:                            Clean mode.          (line   6)
+* command options, libtool:              Invoking libtool.    (line   6)
+* command options, libtoolize:           Invoking libtoolize. (line   6)
+* compile mode:                          Compile mode.        (line   6)
+* compiler_c_o:                          libtool script contents.
+                                                              (line 132)
+* compiler_needs_object:                 libtool script contents.
+                                                              (line 136)
+* compiling object files:                Creating object files.
+                                                              (line   6)
+* complexity of library systems:         Postmortem.          (line  11)
+* config.guess:                          Distributing.        (line  10)
+* config.sub:                            Distributing.        (line  13)
+* configuring libtool:                   Configuring.         (line   6)
+* convenience libraries:                 Static libraries.    (line   6)
+* CPPFLAGS:                              LT_INIT.             (line 237)
+* cross compile:                         Cross compiling.     (line   6)
+* Cygwin to MinGW Cross:                 Cygwin to MinGW Cross.
+                                                              (line   6)
+* debugging libraries:                   Static-only libraries.
+                                                              (line   6)
+* definition of libraries:               Libtool paradigm.    (line  11)
+* demo-conf.test:                        Test descriptions.   (line  66)
+* demo-deplibs.test:                     Test descriptions.   (line  84)
+* demo-exec.test:                        Test descriptions.   (line  66)
+* demo-hardcode.test:                    Test descriptions.   (line  90)
+* demo-inst.test:                        Test descriptions.   (line  66)
+* demo-make.test:                        Test descriptions.   (line  66)
+* demo-nofast-exec.test:                 Test descriptions.   (line  66)
+* demo-nofast-inst.test:                 Test descriptions.   (line  66)
+* demo-nofast-make.test:                 Test descriptions.   (line  66)
+* demo-nofast-unst.test:                 Test descriptions.   (line  66)
+* demo-nofast.test:                      Test descriptions.   (line  66)
+* demo-noinst-link.test:                 Test descriptions.   (line 104)
+* demo-nopic-exec.test:                  Test descriptions.   (line  66)
+* demo-nopic-make.test:                  Test descriptions.   (line  66)
+* demo-nopic.test:                       Test descriptions.   (line  66)
+* demo-pic-exec.test:                    Test descriptions.   (line  66)
+* demo-pic-make.test:                    Test descriptions.   (line  66)
+* demo-pic.test:                         Test descriptions.   (line  66)
+* demo-relink.test:                      Test descriptions.   (line  99)
+* demo-shared-exec.test:                 Test descriptions.   (line  66)
+* demo-shared-inst.test:                 Test descriptions.   (line  66)
+* demo-shared-make.test:                 Test descriptions.   (line  66)
+* demo-shared-unst.test:                 Test descriptions.   (line  66)
+* demo-shared.test:                      Test descriptions.   (line  66)
+* demo-static-exec.test:                 Test descriptions.   (line  66)
+* demo-static-inst.test:                 Test descriptions.   (line  66)
+* demo-static-make.test:                 Test descriptions.   (line  66)
+* demo-static-unst.test:                 Test descriptions.   (line  66)
+* demo-static.test:                      Test descriptions.   (line  66)
+* demo-unst.test:                        Test descriptions.   (line  66)
+* depdemo-conf.test:                     Test descriptions.   (line 128)
+* depdemo-exec.test:                     Test descriptions.   (line 128)
+* depdemo-inst.test:                     Test descriptions.   (line 128)
+* depdemo-make.test:                     Test descriptions.   (line 128)
+* depdemo-nofast-exec.test:              Test descriptions.   (line 128)
+* depdemo-nofast-inst.test:              Test descriptions.   (line 128)
+* depdemo-nofast-make.test:              Test descriptions.   (line 128)
+* depdemo-nofast-unst.test:              Test descriptions.   (line 128)
+* depdemo-nofast.test:                   Test descriptions.   (line 128)
+* depdemo-relink.test:                   Test descriptions.   (line  99)
+* depdemo-shared-exec.test:              Test descriptions.   (line 128)
+* depdemo-shared-inst.test:              Test descriptions.   (line 128)
+* depdemo-shared-make.test:              Test descriptions.   (line 128)
+* depdemo-shared-unst.test:              Test descriptions.   (line 128)
+* depdemo-shared.test:                   Test descriptions.   (line 128)
+* depdemo-static-exec.test:              Test descriptions.   (line 128)
+* depdemo-static-inst.test:              Test descriptions.   (line 128)
+* depdemo-static-make.test:              Test descriptions.   (line 128)
+* depdemo-static-unst.test:              Test descriptions.   (line 128)
+* depdemo-static.test:                   Test descriptions.   (line 128)
+* depdemo-unst.test:                     Test descriptions.   (line 128)
+* dependencies between libraries:        Inter-library dependencies.
+                                                              (line   6)
+* dependency versioning:                 Versioning.          (line   6)
+* deplibs_check_method:                  Porting inter-library dependencies.
+                                                              (line   6)
+* design issues:                         Issues.              (line   6)
+* design of library interfaces:          Library tips.        (line   6)
+* design philosophy:                     Motivation.          (line   6)
+* developing libraries:                  Static-only libraries.
+                                                              (line   6)
+* dlclose <1>:                           Dlopened modules.    (line   6)
+* dlclose:                               Using libltdl.       (line   6)
+* dlerror:                               Using libltdl.       (line   6)
+* DLLTOOL:                               LT_INIT.             (line 270)
+* dlopen <1>:                            Dlopened modules.    (line   6)
+* dlopen:                                Using libltdl.       (line   6)
+* dlopen_self:                           libtool script contents.
+                                                              (line 146)
+* dlopen_self_static:                    libtool script contents.
+                                                              (line 150)
+* dlopen_support:                        libtool script contents.
+                                                              (line 142)
+* dlopening modules <1>:                 Dlopened modules.    (line   6)
+* dlopening modules:                     Using libltdl.       (line   6)
+* dlopening, pitfalls:                   Dlopen issues.       (line   6)
+* dlsym <1>:                             Dlopened modules.    (line   6)
+* dlsym:                                 Using libltdl.       (line   6)
+* double-compilation, avoiding:          Static-only libraries.
+                                                              (line   6)
+* dynamic dependencies:                  Versioning.          (line   6)
+* dynamic linking, applications <1>:     Using libltdl.       (line   6)
+* dynamic linking, applications:         Dlopened modules.    (line   6)
+* dynamic modules, names:                Finding the dlname.  (line   6)
+* ECHO:                                  libtool script contents.
+                                                              (line  38)
+* eliding shared libraries:              Static-only libraries.
+                                                              (line   6)
+* examples of using libtool:             Using libtool.       (line   6)
+* exclude_expsyms:                       libtool script contents.
+                                                              (line 154)
+* execute mode:                          Execute mode.        (line   6)
+* export_dynamic_flag_spec:              libtool script contents.
+                                                              (line 157)
+* export_symbols_cmds:                   libtool script contents.
+                                                              (line 161)
+* extract_expsyms_cmds:                  libtool script contents.
+                                                              (line 165)
+* f77demo-conf.test:                     Test descriptions.   (line 263)
+* f77demo-exec.test:                     Test descriptions.   (line 263)
+* f77demo-make.test:                     Test descriptions.   (line 263)
+* f77demo-shared-exec.test:              Test descriptions.   (line 263)
+* f77demo-shared-make.test:              Test descriptions.   (line 263)
+* f77demo-shared.test:                   Test descriptions.   (line 263)
+* f77demo-static-exec.test:              Test descriptions.   (line 263)
+* f77demo-static-make.test:              Test descriptions.   (line 263)
+* f77demo-static.test:                   Test descriptions.   (line 263)
+* failed tests:                          When tests fail.     (line   6)
+* fast_install:                          libtool script contents.
+                                                              (line 172)
+* fcdemo-conf.test:                      Test descriptions.   (line 281)
+* fcdemo-exec.test:                      Test descriptions.   (line 281)
+* fcdemo-make.test:                      Test descriptions.   (line 281)
+* fcdemo-shared-exec.test:               Test descriptions.   (line 281)
+* fcdemo-shared-make.test:               Test descriptions.   (line 281)
+* fcdemo-shared.test:                    Test descriptions.   (line 281)
+* fcdemo-static-exec.test:               Test descriptions.   (line 281)
+* fcdemo-static-make.test:               Test descriptions.   (line 281)
+* fcdemo-static.test:                    Test descriptions.   (line 281)
+* FDL, GNU Free Documentation License:   GNU Free Documentation License.
+                                                              (line   6)
+* file name conversion:                  File name conversion.
+                                                              (line   6)
+* File Name Conversion - Cygwin to Windows: Cygwin/Windows File Name Conversion.
+                                                              (line   6)
+* File Name Conversion - Failure:        File Name Conversion Failure.
+                                                              (line   6)
+* File Name Conversion - MinGW:          Native MinGW File Name Conversion.
+                                                              (line   6)
+* File Name Conversion - Unix to Windows: Unix/Windows File Name Conversion.
+                                                              (line   6)
+* file_magic:                            Porting inter-library dependencies.
+                                                              (line  18)
+* file_magic_cmd:                        Porting inter-library dependencies.
+                                                              (line  18)
+* file_magic_glob:                       libtool script contents.
+                                                              (line 194)
+* file_magic_test_file:                  Porting inter-library dependencies.
+                                                              (line  18)
+* finish mode:                           Finish mode.         (line   6)
+* finish_cmds:                           libtool script contents.
+                                                              (line 203)
+* finish_eval:                           libtool script contents.
+                                                              (line 207)
+* formal versioning:                     Libtool versioning.  (line   6)
+* func_convert_file_cygwin_to_w32:       Cygwin to MinGW Cross.
+                                                              (line  61)
+* global functions:                      Library tips.        (line  45)
+* global_symbol_pipe:                    libtool script contents.
+                                                              (line 210)
+* global_symbol_to_cdecl:                libtool script contents.
+                                                              (line 224)
+* hardcode_action:                       libtool script contents.
+                                                              (line 230)
+* hardcode_direct:                       libtool script contents.
+                                                              (line 235)
+* hardcode_direct_absolute:              libtool script contents.
+                                                              (line 241)
+* hardcode_into_libs:                    libtool script contents.
+                                                              (line 247)
+* hardcode_libdir_flag_spec:             libtool script contents.
+                                                              (line 253)
+* hardcode_libdir_separator:             libtool script contents.
+                                                              (line 259)
+* hardcode_minus_L:                      libtool script contents.
+                                                              (line 264)
+* hardcode_shlibpath_var:                libtool script contents.
+                                                              (line 269)
+* header files:                          Library tips.        (line  39)
+* host:                                  libtool script contents.
+                                                              (line 276)
+* host_alias:                            libtool script contents.
+                                                              (line 277)
+* host_os:                               libtool script contents.
+                                                              (line 278)
+* implementation of libtool:             libtool script contents.
+                                                              (line   6)
+* include files, portable:               C header files.      (line   6)
+* include_expsyms:                       libtool script contents.
+                                                              (line 282)
+* inferring tags:                        Tags.                (line   6)
+* inherit_rpath:                         libtool script contents.
+                                                              (line 286)
+* install:                               Installing libraries.
+                                                              (line  19)
+* install mode:                          Install mode.        (line   6)
+* install-sh:                            Distributing.        (line  16)
+* install_override_mode:                 libtool script contents.
+                                                              (line 291)
+* installation, finishing:               Installing libraries.
+                                                              (line  54)
+* inter-library dependencies:            Inter-library dependencies.
+                                                              (line   6)
+* inter-library dependency:              Porting inter-library dependencies.
+                                                              (line   6)
+* language names:                        Tags.                (line   6)
+* languages, non-C:                      Other languages.     (line   6)
+* LD <1>:                                LT_INIT.             (line 242)
+* LD:                                    libtool script contents.
+                                                              (line  43)
+* LDFLAGS:                               LT_INIT.             (line 247)
+* libext:                                libtool script contents.
+                                                              (line 299)
+* libltdl:                               Using libltdl.       (line   6)
+* libname_spec:                          libtool script contents.
+                                                              (line 302)
+* libraries, definition of:              Libtool paradigm.    (line  11)
+* libraries, finishing installation:     Installing libraries.
+                                                              (line  54)
+* libraries, stripping:                  Installing libraries.
+                                                              (line  44)
+* library interfaces:                    Interfaces.          (line   6)
+* library interfaces, design:            Library tips.        (line   6)
+* library object file:                   Creating object files.
+                                                              (line  28)
+* library_names_spec:                    libtool script contents.
+                                                              (line 307)
+* LIBS:                                  LT_INIT.             (line 253)
+* libtool:                               Invoking libtool.    (line   6)
+* libtool command options:               Invoking libtool.    (line   6)
+* libtool examples:                      Using libtool.       (line   6)
+* libtool implementation:                libtool script contents.
+                                                              (line   6)
+* libtool libraries:                     Linking libraries.   (line  24)
+* libtool library versions:              Libtool versioning.  (line   6)
+* libtool specifications:                Motivation.          (line  20)
+* libtoolize:                            Invoking libtoolize. (line   6)
+* libtoolize command options:            Invoking libtoolize. (line   6)
+* LIBTOOLIZE_OPTIONS:                    Invoking libtoolize. (line 120)
+* link mode:                             Link mode.           (line   6)
+* link-2.test:                           Test descriptions.   (line 198)
+* link.test:                             Test descriptions.   (line 194)
+* link_all_deplibs:                      libtool script contents.
+                                                              (line 312)
+* link_static_flag:                      libtool script contents.
+                                                              (line 317)
+* linking against installed libraries:   Linking executables. (line   6)
+* linking against uninstalled libraries: Linking executables. (line  25)
+* linking with installed libtool libraries: Linking executables.
+                                                              (line  50)
+* linking, dlopen:                       Linking with dlopened modules.
+                                                              (line   6)
+* linking, dlpreopen:                    Linking with dlopened modules.
+                                                              (line   6)
+* linking, partial:                      Link mode.           (line 207)
+* LN_S:                                  LT_INIT.             (line 265)
+* lock_old_archive_extraction:           libtool script contents.
+                                                              (line 114)
+* LT_CMD_MAX_LEN:                        Autoconf macros.     (line  15)
+* LT_CONFIG_LTDL_DIR:                    Distributing libltdl.
+                                                              (line  32)
+* lt_cv_to_host_file_cmd:                Cygwin to MinGW Cross.
+                                                              (line  61)
+* lt_cv_to_tool_file_cmd:                Cygwin to MinGW Cross.
+                                                              (line  61)
+* LT_CYGPATH:                            LT_CYGPATH.          (line   6)
+* LT_DIRSEP_CHAR:                        Libltdl interface.   (line  40)
+* lt_dladderror:                         Module loaders for libltdl.
+                                                              (line 191)
+* lt_dladdsearchdir:                     Libltdl interface.   (line 244)
+* lt_dladvise:                           Libltdl interface.   (line  50)
+* lt_dladvise_destroy:                   Libltdl interface.   (line 147)
+* lt_dladvise_ext:                       Libltdl interface.   (line 154)
+* lt_dladvise_global:                    Libltdl interface.   (line 179)
+* lt_dladvise_init:                      Libltdl interface.   (line 137)
+* lt_dladvise_local:                     Libltdl interface.   (line 196)
+* lt_dladvise_preload:                   Libltdl interface.   (line 222)
+* lt_dladvise_resident:                  Libltdl interface.   (line 213)
+* lt_dlcaller_get_data:                  User defined module data.
+                                                              (line 154)
+* lt_dlcaller_set_data:                  User defined module data.
+                                                              (line 128)
+* lt_dlclose:                            Libltdl interface.   (line 228)
+* lt_dlerror:                            Libltdl interface.   (line 238)
+* lt_dlexit:                             Libltdl interface.   (line  66)
+* lt_dlforeachfile:                      Libltdl interface.   (line 264)
+* lt_dlgetinfo:                          User defined module data.
+                                                              (line  26)
+* lt_dlgetsearchpath:                    Libltdl interface.   (line 260)
+* lt_dlhandle:                           Libltdl interface.   (line  46)
+* lt_dlhandle_fetch:                     User defined module data.
+                                                              (line 112)
+* lt_dlhandle_interface:                 User defined module data.
+                                                              (line  40)
+* lt_dlhandle_iterate:                   User defined module data.
+                                                              (line  97)
+* lt_dlhandle_map:                       User defined module data.
+                                                              (line  86)
+* lt_dlinfo:                             User defined module data.
+                                                              (line  12)
+* lt_dlinit:                             Libltdl interface.   (line  61)
+* lt_dlinsertsearchdir:                  Libltdl interface.   (line 249)
+* lt_dlinterface_free:                   User defined module data.
+                                                              (line  82)
+* lt_dlinterface_id:                     User defined module data.
+                                                              (line  35)
+* lt_dlinterface_register:               User defined module data.
+                                                              (line  74)
+* lt_dlisresident:                       Libltdl interface.   (line 292)
+* lt_dlloader:                           Module loaders for libltdl.
+                                                              (line  45)
+* lt_dlloader_add:                       Module loaders for libltdl.
+                                                              (line 132)
+* lt_dlloader_data:                      Module loaders for libltdl.
+                                                              (line 182)
+* lt_dlloader_exit:                      Module loaders for libltdl.
+                                                              (line  86)
+* lt_dlloader_find:                      Module loaders for libltdl.
+                                                              (line 164)
+* lt_dlloader_name:                      Module loaders for libltdl.
+                                                              (line 176)
+* lt_dlloader_next:                      Module loaders for libltdl.
+                                                              (line 155)
+* lt_dlloader_remove:                    Module loaders for libltdl.
+                                                              (line 145)
+* lt_dlmakeresident:                     Libltdl interface.   (line 282)
+* lt_dlopen:                             Libltdl interface.   (line  72)
+* lt_dlopenadvise:                       Libltdl interface.   (line 127)
+* lt_dlopenext:                          Libltdl interface.   (line 110)
+* lt_dlpreload:                          Dlpreopening.        (line  69)
+* lt_dlpreload_callback_func:            Dlpreopening.        (line  97)
+* lt_dlpreload_default:                  Dlpreopening.        (line  75)
+* lt_dlpreload_open:                     Dlpreopening.        (line 103)
+* lt_dlseterror:                         Module loaders for libltdl.
+                                                              (line 203)
+* lt_dlsetsearchpath:                    Libltdl interface.   (line 255)
+* lt_dlsym:                              Libltdl interface.   (line 233)
+* lt_dlsymlist <1>:                      Dlpreopening.        (line  42)
+* lt_dlsymlist:                          Libltdl interface.   (line  55)
+* lt_find_sym:                           Module loaders for libltdl.
+                                                              (line  79)
+* LT_FUNC_DLSYM_USCORE:                  Autoconf macros.     (line  24)
+* LT_INIT:                               LT_INIT.             (line  21)
+* LT_LANG:                               LT_INIT.             (line 155)
+* LT_LIB_DLLOAD:                         Autoconf macros.     (line  35)
+* LT_LIB_M:                              Autoconf macros.     (line  31)
+* lt_module:                             Module loaders for libltdl.
+                                                              (line  41)
+* lt_module_close:                       Module loaders for libltdl.
+                                                              (line  72)
+* lt_module_open:                        Module loaders for libltdl.
+                                                              (line  61)
+* LT_OUTPUT:                             LT_INIT.             (line 309)
+* LT_PATH_LD:                            Autoconf macros.     (line  51)
+* LT_PATH_NM:                            Autoconf macros.     (line  57)
+* LT_PATHSEP_CHAR:                       Libltdl interface.   (line  36)
+* lt_preloaded_symbols:                  Dlpreopening.        (line  47)
+* LT_PREREQ:                             LT_INIT.             (line  13)
+* LT_SUPPORTED_TAG:                      Trace interface.     (line  13)
+* LT_SYS_DLOPEN_DEPLIBS:                 Autoconf macros.     (line  70)
+* LT_SYS_DLOPEN_SELF:                    Autoconf macros.     (line  64)
+* LT_SYS_DLSEARCH_PATH:                  Autoconf macros.     (line  75)
+* LT_SYS_MODULE_EXT:                     Autoconf macros.     (line  79)
+* LT_SYS_MODULE_PATH:                    Autoconf macros.     (line  85)
+* LT_SYS_SYMBOL_USCORE:                  Autoconf macros.     (line  90)
+* lt_user_data:                          Module loaders for libltdl.
+                                                              (line  48)
+* lt_user_dlloader:                      Module loaders for libltdl.
+                                                              (line  53)
+* LT_WITH_LTDL:                          Distributing libltdl.
+                                                              (line  41)
+* LTCC:                                  libtool script contents.
+                                                              (line  47)
+* LTCFLAGS:                              libtool script contents.
+                                                              (line  48)
+* LTDL_CONVENIENCE:                      Distributing libltdl.
+                                                              (line 301)
+* LTDL_INIT:                             Distributing libltdl.
+                                                              (line  40)
+* LTDL_INSTALLABLE:                      Distributing libltdl.
+                                                              (line 296)
+* LTDL_SET_PRELOADED_SYMBOLS:            Dlpreopening.        (line  85)
+* LTLIBOBJS:                             Autoconf and LTLIBOBJS.
+                                                              (line   8)
+* LTLIBRARIES:                           Using Automake.      (line   6)
+* ltmain.sh:                             Distributing.        (line  19)
+* macro_revision:                        libtool script contents.
+                                                              (line 322)
+* macro_version:                         libtool script contents.
+                                                              (line 321)
+* Makefile:                              Makefile rules.      (line   6)
+* Makefile.am:                           Makefile rules.      (line   6)
+* Makefile.in:                           Makefile rules.      (line   6)
+* MANIFEST_TOOL:                         LT_INIT.             (line 282)
+* max_cmd_len:                           libtool script contents.
+                                                              (line 327)
+* mdemo-conf.test:                       Test descriptions.   (line 161)
+* mdemo-dryrun.test:                     Test descriptions.   (line 180)
+* mdemo-exec.test:                       Test descriptions.   (line 161)
+* mdemo-inst.test:                       Test descriptions.   (line 161)
+* mdemo-make.test:                       Test descriptions.   (line 161)
+* mdemo-shared-exec.test:                Test descriptions.   (line 161)
+* mdemo-shared-inst.test:                Test descriptions.   (line 161)
+* mdemo-shared-make.test:                Test descriptions.   (line 161)
+* mdemo-shared-unst.test:                Test descriptions.   (line 161)
+* mdemo-shared.test:                     Test descriptions.   (line 161)
+* mdemo-static-exec.test:                Test descriptions.   (line 161)
+* mdemo-static-inst.test:                Test descriptions.   (line 161)
+* mdemo-static-make.test:                Test descriptions.   (line 161)
+* mdemo-static-unst.test:                Test descriptions.   (line 161)
+* mdemo-static.test:                     Test descriptions.   (line 161)
+* mdemo-unst.test:                       Test descriptions.   (line 161)
+* mdemo2-conf.test:                      Test descriptions.   (line 185)
+* mdemo2-exec.test:                      Test descriptions.   (line 185)
+* mdemo2-make.test:                      Test descriptions.   (line 185)
+* mode, clean:                           Clean mode.          (line   6)
+* mode, compile:                         Compile mode.        (line   6)
+* mode, execute:                         Execute mode.        (line   6)
+* mode, finish:                          Finish mode.         (line   6)
+* mode, install:                         Install mode.        (line   6)
+* mode, link:                            Link mode.           (line   6)
+* mode, uninstall:                       Uninstall mode.      (line   6)
+* modules, dynamic <1>:                  Dlopened modules.    (line   6)
+* modules, dynamic:                      Using libltdl.       (line   6)
+* motivation for writing libtool:        Motivation.          (line   6)
+* MSYS:                                  Native MinGW File Name Conversion.
+                                                              (line   6)
+* names of dynamic modules:              Finding the dlname.  (line   6)
+* need_lib_prefix:                       libtool script contents.
+                                                              (line 331)
+* need_locks:                            libtool script contents.
+                                                              (line 344)
+* need_version:                          libtool script contents.
+                                                              (line 338)
+* NM <1>:                                LT_INIT.             (line 259)
+* NM:                                    libtool script contents.
+                                                              (line  52)
+* nm_file_list_spec:                     libtool script contents.
+                                                              (line 348)
+* no_builtin_flag:                       libtool script contents.
+                                                              (line 351)
+* no_undefined_flag:                     libtool script contents.
+                                                              (line 355)
+* nomode.test:                           Test descriptions.   (line 202)
+* none:                                  Porting inter-library dependencies.
+                                                              (line  38)
+* objdir:                                libtool script contents.
+                                                              (line 360)
+* OBJDUMP:                               LT_INIT.             (line 274)
+* object files, compiling:               Creating object files.
+                                                              (line   6)
+* object files, library:                 Creating object files.
+                                                              (line  28)
+* objectlist.test:                       Test descriptions.   (line 205)
+* objext:                                libtool script contents.
+                                                              (line 363)
+* old_archive_cmds:                      libtool script contents.
+                                                              (line  90)
+* old_archive_from_expsyms_cmds:         libtool script contents.
+                                                              (line 103)
+* old_archive_from_new_cmds:             libtool script contents.
+                                                              (line  97)
+* old_postinstall_cmds:                  libtool script contents.
+                                                              (line 370)
+* old_postuninstall_cmds:                libtool script contents.
+                                                              (line 375)
+* old_striplib:                          libtool script contents.
+                                                              (line 415)
+* opaque data types:                     Library tips.        (line  28)
+* options, libtool command:              Invoking libtool.    (line   6)
+* options, libtoolize command:           Invoking libtoolize. (line   6)
+* other implementations, flaws in:       Postmortem.          (line   6)
+* partial linking:                       Link mode.           (line 207)
+* pass_all:                              Porting inter-library dependencies.
+                                                              (line  32)
+* path conversion:                       File name conversion.
+                                                              (line   6)
+* Path Conversion - Cygwin to Windows:   Cygwin/Windows File Name Conversion.
+                                                              (line   6)
+* Path Conversion - Failure:             File Name Conversion Failure.
+                                                              (line   6)
+* Path Conversion - MinGW:               Native MinGW File Name Conversion.
+                                                              (line   6)
+* Path Conversion - Unix to Windows:     Unix/Windows File Name Conversion.
+                                                              (line   6)
+* pdemo-conf.test:                       Test descriptions.   (line 211)
+* pdemo-exec.test:                       Test descriptions.   (line 211)
+* pdemo-inst.test:                       Test descriptions.   (line 211)
+* pdemo-make.test:                       Test descriptions.   (line 211)
+* PIC (position-independent code):       Creating object files.
+                                                              (line  23)
+* pic_flag:                              libtool script contents.
+                                                              (line 366)
+* pitfalls using C++:                    C++ libraries.       (line   6)
+* pitfalls with dlopen:                  Dlopen issues.       (line   6)
+* portable C headers:                    C header files.      (line   6)
+* position-independent code:             Creating object files.
+                                                              (line  23)
+* postinstall_cmds:                      libtool script contents.
+                                                              (line 369)
+* postinstallation:                      Installing libraries.
+                                                              (line  54)
+* postlink_cmds:                         libtool script contents.
+                                                              (line 379)
+* postuninstall_cmds:                    libtool script contents.
+                                                              (line 374)
+* problem reports:                       Reporting bugs.      (line   6)
+* problems, blaming somebody else for:   Troubleshooting.     (line   6)
+* problems, solving:                     Troubleshooting.     (line   6)
+* program wrapper executables:           Wrapper executables. (line   6)
+* program wrapper scripts:               Linking executables. (line  71)
+* quote.test:                            Test descriptions.   (line 220)
+* ranlib:                                Linking libraries.   (line  12)
+* RANLIB <1>:                            LT_INIT.             (line 262)
+* RANLIB:                                libtool script contents.
+                                                              (line  73)
+* reload_cmds:                           libtool script contents.
+                                                              (line 388)
+* reload_flag:                           libtool script contents.
+                                                              (line 389)
+* renaming interface functions:          Library tips.        (line  21)
+* reporting bugs:                        Reporting bugs.      (line   6)
+* reusability of library systems:        Postmortem.          (line   6)
+* runpath_var:                           libtool script contents.
+                                                              (line 393)
+* saving time:                           Static-only libraries.
+                                                              (line   6)
+* security problems with buggy linkers:  Linking executables. (line  16)
+* sh.test:                               Test descriptions.   (line 223)
+* shared libraries, not using:           Static-only libraries.
+                                                              (line   6)
+* shared library versions:               Versioning.          (line   6)
+* shl_load <1>:                          Dlopened modules.    (line   6)
+* shl_load:                              Using libltdl.       (line   6)
+* shlibpath_overrides_runpath:           libtool script contents.
+                                                              (line 397)
+* shlibpath_var:                         libtool script contents.
+                                                              (line 406)
+* solving problems:                      Troubleshooting.     (line   6)
+* soname_spec:                           libtool script contents.
+                                                              (line 410)
+* specifications for libtool:            Motivation.          (line  20)
+* standalone binaries:                   Static libraries.    (line  64)
+* static linking:                        Static libraries.    (line   6)
+* strip:                                 Installing libraries.
+                                                              (line   6)
+* striplib:                              libtool script contents.
+                                                              (line 414)
+* stripping libraries:                   Installing libraries.
+                                                              (line  44)
+* su:                                    Installing libraries.
+                                                              (line   9)
+* suffix.test:                           Test descriptions.   (line 227)
+* sys_lib_dlsearch_path_spec:            libtool script contents.
+                                                              (line 421)
+* sys_lib_search_path_spec:              libtool script contents.
+                                                              (line 426)
+* tag names:                             Tags.                (line   6)
+* tagdemo-conf.test:                     Test descriptions.   (line 245)
+* tagdemo-exec.test:                     Test descriptions.   (line 245)
+* tagdemo-make.test:                     Test descriptions.   (line 245)
+* tagdemo-shared-exec.test:              Test descriptions.   (line 245)
+* tagdemo-shared-make.test:              Test descriptions.   (line 245)
+* tagdemo-shared.test:                   Test descriptions.   (line 245)
+* tagdemo-static-exec.test:              Test descriptions.   (line 245)
+* tagdemo-static-make.test:              Test descriptions.   (line 245)
+* tagdemo-static.test:                   Test descriptions.   (line 245)
+* tagdemo-undef-exec.test:               Test descriptions.   (line 245)
+* tagdemo-undef-make.test:               Test descriptions.   (line 245)
+* tagdemo-undef.test:                    Test descriptions.   (line 245)
+* test suite:                            Libtool test suite.  (line   6)
+* test_compile:                          Porting inter-library dependencies.
+                                                              (line  26)
+* tests, failed:                         When tests fail.     (line   6)
+* thread_safe_flag_spec:                 libtool script contents.
+                                                              (line 435)
+* time, saving:                          Static-only libraries.
+                                                              (line   6)
+* to_host_file_cmd:                      libtool script contents.
+                                                              (line 439)
+* to_tool_file_cmd:                      libtool script contents.
+                                                              (line 450)
+* trace interface:                       Trace interface.     (line   6)
+* tricky design issues:                  Issues.              (line   6)
+* trouble with C++:                      C++ libraries.       (line   6)
+* trouble with dlopen:                   Dlopen issues.       (line   6)
+* troubleshooting:                       Troubleshooting.     (line   6)
+* undefined symbols, allowing:           Link mode.           (line  14)
+* uninstall mode:                        Uninstall mode.      (line   6)
+* unknown:                               Porting inter-library dependencies.
+                                                              (line  43)
+* unresolved symbols, allowing:          Link mode.           (line  14)
+* using shared libraries, not:           Static-only libraries.
+                                                              (line   6)
+* version_type:                          libtool script contents.
+                                                              (line 458)
+* versioning, formal:                    Libtool versioning.  (line   6)
+* want_nocaseglob:                       libtool script contents.
+                                                              (line 463)
+* whole_archive_flag_spec:               libtool script contents.
+                                                              (line 469)
+* Windows DLLs:                          Windows DLLs.        (line   6)
+* wl:                                    libtool script contents.
+                                                              (line 472)
+* wrapper executables for uninstalled programs: Wrapper executables.
+                                                              (line   6)
+* wrapper scripts for programs:          Linking executables. (line  71)
+
+
diff --git a/doc/libtool.texi b/doc/libtool.texi
new file mode 100644
index 0000000..d6fc53d
--- /dev/null
+++ b/doc/libtool.texi
@@ -0,0 +1,7211 @@
+\input texinfo   @c -*-texinfo-*-
+@c %**start of header
+@setfilename libtool.info
+@settitle Libtool
+@c For double-sided printing, uncomment:
+@c @setchapternewpage odd
+@c %**end of header
+
+@include version.texi
+@set BUGADDR the Libtool bug reporting address @email{bug-libtool@@gnu.org}
+@set MAILLIST the Libtool mailing list @email{libtool@@gnu.org}
+@set objdir .libs
+
+@dircategory GNU programming tools
+@direntry
+* Libtool: (libtool).           Generic shared library support script.
+@end direntry
+
+@dircategory Individual utilities
+@direntry
+* libtool-invocation: (libtool)Invoking libtool.
+                                                Running the @code{libtool} script.
+* libtoolize: (libtool)Invoking libtoolize.     Adding libtool support.
+@end direntry
+
+@ifnottex
+This file documents GNU Libtool @value{VERSION}
+
+Copyright (C) 1996-2011 Free Software Foundation, Inc.
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts,
+and with no Back-Cover Texts.  A copy of the license is included in
+the section entitled "GNU Free Documentation License".
+
+@ignore
+Permission is granted to process this file through TeX and print the
+results, provided the printed document carries copying permission notice
+identical to this one except for the removal of this paragraph
+
+@end ignore
+@end ifnottex
+
+@titlepage
+@title GNU Libtool
+@subtitle For version @value{VERSION}, @value{UPDATED}
+@author Gordon Matzigkeit
+@author Alexandre Oliva
+@author Thomas Tanner
+@author Gary V. Vaughan
+
+@page
+@vskip 0pt plus 1filll
+Copyright @copyright{} 1996-2011 Free Software Foundation, Inc.
+
+Permission is granted to copy, distribute and/or modify this document
+under the terms of the GNU Free Documentation License, Version 1.3
+or any later version published by the Free Software Foundation;
+with no Invariant Sections, with no Front-Cover Texts,
+and with no Back-Cover Texts.  A copy of the license is included in
+the section entitled "GNU Free Documentation License".
+
+@end titlepage
+
+@c Put everything in one index (arbitrarily chosen to be the concept index).
+@syncodeindex vr cp
+@syncodeindex fn cp
+@syncodeindex tp cp
+@synindex pg cp
+
+@contents
+
+@ifnottex
+@node Top, Introduction, (dir), (dir)
+@comment  node-name,  next,  previous,  up
+@top Shared library support for GNU
+
+This file documents GNU Libtool, a script that allows package developers
+to provide generic shared library support.  This edition documents
+version @value{VERSION}.
+
+@xref{Reporting bugs}, for information on how to report problems with
+GNU Libtool.
+
+@menu
+* Introduction::                What the heck is libtool?
+* Libtool paradigm::            How libtool's view of libraries is different.
+* Using libtool::               Example of using libtool to build libraries.
+* Invoking libtool::            Running the @code{libtool} script.
+* Integrating libtool::         Using libtool in your own packages.
+* Other languages::             Using libtool without a C compiler.
+* Versioning::                  Using library interface versions.
+* Library tips::                Tips for library interface design.
+* Inter-library dependencies::  Libraries that depend on other libraries.
+* Dlopened modules::            @code{dlopen}ing libtool-created libraries.
+* Using libltdl::               Libtool's portable @code{dlopen} wrapper library.
+* Trace interface::             Libtool's trace interface.
+* FAQ::                         Frequently Asked Questions
+* Troubleshooting::             When libtool doesn't work as advertised.
+* Maintaining::                 Information used by the libtool maintainer.
+* GNU Free Documentation License::  License for this manual.
+* Combined Index::              Full index.
+
+@detailmenu
+ --- The Detailed Node Listing ---
+
+Introduction
+
+* Motivation::                  Why does GNU need a libtool?
+* Issues::                      The problems that need to be addressed.
+* Other implementations::       How other people have solved these issues.
+* Postmortem::                  Learning from past difficulties.
+
+Using libtool
+
+* Creating object files::       Compiling object files for libraries.
+* Linking libraries::           Creating libraries from object files.
+* Linking executables::         Linking object files against libtool libraries.
+* Debugging executables::       Running GDB on libtool-generated programs.
+* Installing libraries::        Making libraries available to users.
+* Installing executables::      Making programs available to users.
+* Static libraries::            When shared libraries are not wanted.
+
+Linking executables
+
+* Wrapper executables::         Wrapper executables for some platforms.
+
+Invoking @command{libtool}
+
+* Compile mode::                Creating library object files.
+* Link mode::                   Generating executables and libraries.
+* Execute mode::                Debugging libtool-generated programs.
+* Install mode::                Making libraries and executables public.
+* Finish mode::                 Completing a library installation.
+* Uninstall mode::              Removing installed executables and libraries.
+* Clean mode::                  Removing uninstalled executables and libraries.
+
+Integrating libtool with your package
+
+* Autoconf macros::             Autoconf macros exported by libtool.
+* Makefile rules::              Writing @file{Makefile} rules for libtool.
+* Using Automake::              Automatically supporting libtool.
+* Configuring::                 Configuring libtool for a host system.
+* Distributing::                What files to distribute with your package.
+* Static-only libraries::       Sometimes shared libraries are just a pain.
+
+Configuring libtool
+
+* LT_INIT::                     Configuring @code{libtool} in @file{configure.ac}.
+* Configure notes::             Platform-specific notes for configuration.
+
+Including libtool in your package
+
+* Invoking libtoolize::         @code{libtoolize} command line options.
+* Autoconf and LTLIBOBJS::      Autoconf automates LTLIBOBJS generation.
+
+Using libtool with other languages
+
+* C++ libraries::               Writing libraries for C++
+* Tags::                        Tags
+
+Library interface versions
+
+* Interfaces::                  What are library interfaces?
+* Libtool versioning::          Libtool's versioning system.
+* Updating version info::       Changing version information before releases.
+* Release numbers::             Breaking binary compatibility for aesthetics.
+
+Tips for interface design
+
+* C header files::              How to write portable include files.
+
+Dlopened modules
+
+* Building modules::            Creating dlopenable objects and libraries.
+* Dlpreopening::                Dlopening that works on static platforms.
+* Linking with dlopened modules::  Using dlopenable modules in libraries.
+* Finding the dlname::          Choosing the right file to @code{dlopen}.
+* Dlopen issues::               Unresolved problems that need your attention.
+
+Using libltdl
+
+* Libltdl interface::           How to use libltdl in your programs.
+* Modules for libltdl::         Creating modules that can be @code{dlopen}ed.
+* Thread Safety in libltdl::    Registering callbacks for multi-thread safety.
+* User defined module data::    Associating data with loaded modules.
+* Module loaders for libltdl::  Creating user defined module loaders.
+* Distributing libltdl::        How to distribute libltdl with your package.
+
+Frequently Asked Questions about libtool
+
+* Stripped link flags::         Dropped flags when creating a library
+
+Troubleshooting
+
+* Libtool test suite::          Libtool's self-tests.
+* Reporting bugs::              How to report problems with libtool.
+
+The libtool test suite
+
+* Test descriptions::           The contents of the old test suite.
+* When tests fail::             What to do when a test fails.
+
+Maintenance notes for libtool
+
+* New ports::                   How to port libtool to new systems.
+* Tested platforms::            When libtool was last tested.
+* Platform quirks::             Information about different library systems.
+* libtool script contents::     Configuration information that libtool uses.
+* Cheap tricks::                Making libtool maintainership easier.
+
+Porting libtool to new systems
+
+* Information sources::         Where to find relevant documentation
+* Porting inter-library dependencies::  Implementation details explained
+
+Platform quirks
+
+* References::                  Finding more information.
+* Compilers::                   Creating object files from source files.
+* Reloadable objects::          Binding object files together.
+* Multiple dependencies::       Removing duplicate dependent libraries.
+* Archivers::                   Programs that create static archives.
+* Cross compiling::             Issues that arise when cross compiling.
+* File name conversion::        Converting file names between platforms.
+* Windows DLLs::                Windows header defines.
+
+File name conversion
+
+* File Name Conversion Failure::  What happens when file name conversion fails
+* Native MinGW File Name Conversion::  MSYS file name conversion idiosyncrasies
+* Cygwin/Windows File Name Conversion::  Using @command{cygpath} to convert Cygwin file names
+* Unix/Windows File Name Conversion::  Using Wine to convert Unix paths
+* LT_CYGPATH::                  Invoking @command{cygpath} from other environments
+* Cygwin to MinGW Cross::       Other notes concerning MinGW cross
+
+@end detailmenu
+@end menu
+
+@end ifnottex
+
+@node Introduction
+@chapter Introduction
+
+In the past, if you were a source code package developer and wanted to
+take advantage of the power of shared libraries, you needed to write
+custom support code for each platform on which your package ran.  You
+also had to design a configuration interface so that the package
+installer could choose what sort of libraries were built.
+
+GNU Libtool simplifies your job by encapsulating both the
+platform-specific dependencies, and the user interface, in a single
+script.  GNU Libtool is designed so that the complete functionality of
+each host type is available via a generic interface, but nasty quirks
+are hidden from the programmer.
+
+GNU Libtool's consistent interface is reassuring@dots{} users don't need
+to read obscure documentation in order to have their favorite source
+package build shared libraries.  They just run your package
+@code{configure} script (or equivalent), and libtool does all the dirty
+work.
+
+There are several examples throughout this document.  All assume the
+same environment: we want to build a library, @file{libhello}, in a
+generic way.
+
+@file{libhello} could be a shared library, a static library, or
+both@dots{} whatever is available on the host system, as long as libtool
+has been ported to it.
+
+This chapter explains the original design philosophy of libtool.  Feel
+free to skip to the next chapter, unless you are interested in history,
+or want to write code to extend libtool in a consistent way.
+
+@menu
+* Motivation::                  Why does GNU need a libtool?
+* Issues::                      The problems that need to be addressed.
+* Other implementations::       How other people have solved these issues.
+* Postmortem::                  Learning from past difficulties.
+@end menu
+
+@node Motivation
+@section Motivation for writing libtool
+
+@cindex motivation for writing libtool
+@cindex design philosophy
+Since early 1995, several different GNU developers have recognized the
+importance of having shared library support for their packages.  The
+primary motivation for such a change is to encourage modularity and
+reuse of code (both conceptually and physically) in GNU programs.
+
+Such a demand means that the way libraries are built in GNU packages
+needs to be general, to allow for any library type the package installer
+might want.  The problem is compounded by the absence of a standard
+procedure for creating shared libraries on different platforms.
+
+The following sections outline the major issues facing shared library
+support in GNU, and how shared library support could be standardized
+with libtool.
+
+@cindex specifications for libtool
+@cindex libtool specifications
+The following specifications were used in developing and evaluating this
+system:
+
+@enumerate
+@item
+The system must be as elegant as possible.
+
+@item
+The system must be fully integrated with the GNU Autoconf and Automake
+utilities, so that it will be easy for GNU maintainers to use.  However,
+the system must not require these tools, so that it can be used by
+non-GNU packages.
+
+@item
+Portability to other (non-GNU) architectures and tools is desirable.
+@end enumerate
+
+@node Issues
+@section Implementation issues
+
+@cindex tricky design issues
+@cindex design issues
+The following issues need to be addressed in any reusable shared library
+system, specifically libtool:
+
+@enumerate
+@item
+The package installer should be able to control what sort of libraries
+are built.
+
+@item
+It can be tricky to run dynamically linked programs whose libraries have
+not yet been installed.  @code{LD_LIBRARY_PATH} must be set properly (if
+it is supported), or programs fail to run.
+
+@item
+The system must operate consistently even on hosts that don't support
+shared libraries.
+
+@item
+The commands required to build shared libraries may differ wildly from
+host to host.  These need to be determined at configure time in
+a consistent way.
+
+@item
+It is not always obvious with what prefix or suffix a shared library
+should be installed.  This makes it difficult for @file{Makefile} rules,
+since they generally assume that file names are the same from host to
+host.
+
+@item
+The system needs a simple library version number abstraction, so that
+shared libraries can be upgraded in place.  The programmer should be
+informed how to design the interfaces to the library to maximize binary
+compatibility.
+
+@item
+The install @file{Makefile} target should warn the package installer to set
+the proper environment variables (@code{LD_LIBRARY_PATH} or equivalent),
+or run @command{ldconfig}.
+@end enumerate
+
+@node Other implementations
+@section Other implementations
+
+Even before libtool was developed, many free software packages built and
+installed their own shared libraries.  At first, these packages were
+examined to avoid reinventing existing features.
+
+Now it is clear that none of these packages have documented the details
+of shared library systems that libtool requires.  So, other packages
+have been more or less abandoned as influences.
+
+@node Postmortem
+@section A postmortem analysis of other implementations
+
+@cindex other implementations, flaws in
+@cindex reusability of library systems
+In all fairness, each of the implementations that were examined do the
+job that they were intended to do, for a number of different host
+systems.  However, none of these solutions seem to function well as a
+generalized, reusable component.
+
+@cindex complexity of library systems
+Most were too complex to use (much less modify) without understanding
+exactly what the implementation does, and they were generally not
+documented.
+
+The main difficulty is that different vendors have different views of
+what libraries are, and none of the packages that were examined seemed
+to be confident enough to settle on a single paradigm that just
+@emph{works}.
+
+Ideally, libtool would be a standard that would be implemented as series
+of extensions and modifications to existing library systems to make them
+work consistently.  However, it is not an easy task to convince
+operating system developers to mend their evil ways, and people want to
+build shared libraries right now, even on buggy, broken, confused
+operating systems.
+
+For this reason, libtool was designed as an independent shell script.
+It isolates the problems and inconsistencies in library building that
+plague @file{Makefile} writers by wrapping the compiler suite on
+different platforms with a consistent, powerful interface.
+
+With luck, libtool will be useful to and used by the GNU community, and
+that the lessons that were learned in writing it will be taken up by
+designers of future library systems.
+
+@node Libtool paradigm
+@chapter The libtool paradigm
+
+At first, libtool was designed to support an arbitrary number of library
+object types.  After libtool was ported to more platforms, a new
+paradigm gradually developed for describing the relationship between
+libraries and programs.
+
+@cindex definition of libraries
+@cindex libraries, definition of
+In summary, ``libraries are programs with multiple entry points, and
+more formally defined interfaces.''
+
+Version 0.7 of libtool was a complete redesign and rewrite of libtool to
+reflect this new paradigm.  So far, it has proved to be successful:
+libtool is simpler and more useful than before.
+
+The best way to introduce the libtool paradigm is to contrast it with
+the paradigm of existing library systems, with examples from each.  It
+is a new way of thinking, so it may take a little time to absorb, but
+when you understand it, the world becomes simpler.
+
+@node Using libtool
+@chapter Using libtool
+
+@cindex examples of using libtool
+@cindex libtool examples
+It makes little sense to talk about using libtool in your own packages
+until you have seen how it makes your life simpler.  The examples in
+this chapter introduce the main features of libtool by comparing the
+standard library building procedure to libtool's operation on two
+different platforms:
+
+@table @samp
+@item a23
+An Ultrix 4.2 platform with only static libraries.
+
+@item burger
+A NetBSD/i386 1.2 platform with shared libraries.
+@end table
+
+You can follow these examples on your own platform, using the
+preconfigured libtool script that was installed with libtool
+(@pxref{Configuring}).
+
+Source files for the following examples are taken from the @file{demo}
+subdirectory of the libtool distribution.  Assume that we are building a
+library, @file{libhello}, out of the files @file{foo.c} and
+@file{hello.c}.
+
+Note that the @file{foo.c} source file uses the @code{cos} math library
+function, which is usually found in the standalone math library, and not
+the C library (@pxref{Trig Functions, , Trigonometric Functions, libc,
+The GNU C Library Reference Manual}).  So, we need to add @option{-lm} to
+the end of the link line whenever we link @file{foo.lo} into an
+executable or a library (@pxref{Inter-library dependencies}).
+
+The same rule applies whenever you use functions that don't appear in
+the standard C library@dots{} you need to add the appropriate
+@option{-l@var{name}} flag to the end of the link line when you link
+against those objects.
+
+After we have built that library, we want to create a program by linking
+@file{main.o} against @file{libhello}.
+
+@menu
+* Creating object files::       Compiling object files for libraries.
+* Linking libraries::           Creating libraries from object files.
+* Linking executables::         Linking object files against libtool libraries.
+* Debugging executables::       Running GDB on libtool-generated programs.
+* Installing libraries::        Making libraries available to users.
+* Installing executables::      Making programs available to users.
+* Static libraries::            When shared libraries are not wanted.
+@end menu
+
+@node Creating object files
+@section Creating object files
+
+@cindex compiling object files
+@cindex object files, compiling
+To create an object file from a source file, the compiler is invoked
+with the @option{-c} flag (and any other desired flags):
+
+@example
+burger$ @kbd{gcc -g -O -c main.c}
+burger$
+@end example
+
+The above compiler command produces an object file, usually named
+@file{main.o}, from the source file @file{main.c}.
+
+For most library systems, creating object files that become part of a
+static library is as simple as creating object files that are linked to
+form an executable:
+
+@example
+burger$ @kbd{gcc -g -O -c foo.c}
+burger$ @kbd{gcc -g -O -c hello.c}
+burger$
+@end example
+
+@cindex position-independent code
+@cindex PIC (position-independent code)
+Shared libraries, however, may only be built from
+@dfn{position-independent code} (PIC).  So, special flags must be passed
+to the compiler to tell it to generate PIC rather than the standard
+position-dependent code.
+
+@cindex library object file
+@cindex @file{.lo} files
+@cindex object files, library
+Since this is a library implementation detail, libtool hides the
+complexity of PIC compiler flags and uses separate library object files
+(the PIC one lives in the @file{@value{objdir}} subdirectory and the
+static one lives in the current directory).  On systems without shared
+libraries, the PIC library object files are not created, whereas on
+systems where all code is PIC, such as AIX, the static ones are not
+created.
+
+To create library object files for @file{foo.c} and @file{hello.c},
+simply invoke libtool with the standard compilation command as
+arguments (@pxref{Compile mode}):
+
+@example
+a23$ @kbd{libtool --mode=compile gcc -g -O -c foo.c}
+gcc -g -O -c foo.c -o foo.o
+a23$ @kbd{libtool --mode=compile gcc -g -O -c hello.c}
+gcc -g -O -c hello.c -o hello.o
+a23$
+@end example
+
+Note that libtool silently creates an additional control file on each
+@samp{compile} invocation.  The @file{.lo} file is the libtool object,
+which Libtool uses to determine what object file may be built into a
+shared library.  On @samp{a23}, only static libraries are supported so
+the library objects look like this:
+
+@example
+# foo.lo - a libtool object file
+# Generated by ltmain.sh (GNU libtool) @value{VERSION}
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=none
+
+# Name of the non-PIC object.
+non_pic_object='foo.o'
+@end example
+
+On shared library systems, libtool automatically generates an
+additional PIC object by inserting the appropriate PIC generation
+flags into the compilation command:
+
+@example
+burger$ @kbd{libtool --mode=compile gcc -g -O -c foo.c}
+mkdir @value{objdir}
+gcc -g -O -c foo.c  -fPIC -DPIC -o @value{objdir}/foo.o
+gcc -g -O -c foo.c -o foo.o >/dev/null 2>&1
+burger$
+@end example
+
+Note that Libtool automatically created @file{@value{objdir}} directory
+upon its first execution, where PIC library object files will be stored.
+
+Since @samp{burger} supports shared libraries, and requires PIC
+objects to build them, Libtool has compiled a PIC object this time,
+and made a note of it in the libtool object:
+
+@example
+# foo.lo - a libtool object file
+# Generated by ltmain.sh (GNU libtool) @value{VERSION}
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object='@value{objdir}/foo.o'
+
+# Name of the non-PIC object.
+non_pic_object='foo.o'
+@end example
+
+@cindex @option{-no-suppress}, libtool compile mode option
+Notice that the second run of GCC has its output discarded.  This is
+done so that compiler warnings aren't annoyingly duplicated.  If you
+need to see both sets of warnings (you might have conditional code
+inside @samp{#ifdef PIC} for example), you can turn off suppression with
+the @option{-no-suppress} option to libtool's compile mode:
+
+@example
+burger$ @kbd{libtool --mode=compile gcc -no-suppress -g -O -c hello.c}
+gcc -g -O -c hello.c  -fPIC -DPIC -o @value{objdir}/hello.o
+gcc -g -O -c hello.c -o hello.o
+burger$
+@end example
+
+
+@node Linking libraries
+@section Linking libraries
+
+@pindex ar
+Without libtool, the programmer would invoke the @command{ar} command to
+create a static library:
+
+@example
+burger$ @kbd{ar cru libhello.a hello.o foo.o}
+burger$
+@end example
+
+@pindex ranlib
+But of course, that would be too simple, so many systems require that
+you run the @code{ranlib} command on the resulting library (to give it
+better karma, or something):
+
+@example
+burger$ @kbd{ranlib libhello.a}
+burger$
+@end example
+
+It seems more natural to use the C compiler for this task, given
+libtool's ``libraries are programs'' approach.  So, on platforms without
+shared libraries, libtool simply acts as a wrapper for the system
+@command{ar} (and possibly @code{ranlib}) commands.
+
+@cindex libtool libraries
+@cindex @file{.la} files
+Again, the libtool control file name (@file{.la} suffix) differs from
+the standard library name (@file{.a} suffix).  The arguments to
+libtool are the same ones you would use to produce an executable named
+@file{libhello.la} with your compiler (@pxref{Link mode}):
+
+@example
+a23$ @kbd{libtool --mode=link gcc -g -O -o libhello.la foo.o hello.o}
+*** Warning: Linking the shared library libhello.la against the
+*** non-libtool objects foo.o hello.o is not portable!
+ar cru .libs/libhello.a
+ranlib .libs/libhello.a
+creating libhello.la
+(cd .libs && rm -f libhello.la && ln -s ../libhello.la libhello.la)
+a23$
+@end example
+
+Aha!  Libtool caught a common error@dots{} trying to build a library
+from standard objects instead of special @file{.lo} object files.  This
+doesn't matter so much for static libraries, but on shared library
+systems, it is of great importance.  (Note that you may replace
+@file{libhello.la} with @file{libhello.a} in which case libtool won't
+issue the warning any more.  But although this method works, this is
+not intended to be used because it makes you lose the benefits of
+using Libtool.)
+
+So, let's try again, this time with the library object files.  Remember
+also that we need to add @option{-lm} to the link command line because
+@file{foo.c} uses the @code{cos} math library function (@pxref{Using
+libtool}).
+
+Another complication in building shared libraries is that we need to
+specify the path to the directory in which they (eventually) will be
+installed (in this case, @file{/usr/local/lib})@footnote{If you don't
+specify an @code{rpath}, then libtool builds a libtool convenience
+archive, not a shared library (@pxref{Static libraries}).}:
+
+@example
+a23$ @kbd{libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
+                -rpath /usr/local/lib -lm}
+ar cru @value{objdir}/libhello.a foo.o hello.o
+ranlib @value{objdir}/libhello.a
+creating libhello.la
+(cd @value{objdir} && rm -f libhello.la && ln -s ../libhello.la libhello.la)
+a23$
+@end example
+
+Now, let's try the same trick on the shared library platform:
+
+@example
+burger$ @kbd{libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
+                -rpath /usr/local/lib -lm}
+rm -fr  @value{objdir}/libhello.a @value{objdir}/libhello.la
+ld -Bshareable -o @value{objdir}/libhello.so.0.0 @value{objdir}/foo.o @value{objdir}/hello.o -lm
+ar cru @value{objdir}/libhello.a foo.o hello.o
+ranlib @value{objdir}/libhello.a
+creating libhello.la
+(cd @value{objdir} && rm -f libhello.la && ln -s ../libhello.la libhello.la)
+burger$
+@end example
+
+Now that's significantly cooler@dots{} Libtool just ran an obscure
+@command{ld} command to create a shared library, as well as the static
+library.
+
+@cindex @file{@value{objdir}} subdirectory
+Note how libtool creates extra files in the @file{@value{objdir}}
+subdirectory, rather than the current directory.  This feature is to
+make it easier to clean up the build directory, and to help ensure that
+other programs fail horribly if you accidentally forget to use libtool
+when you should.
+
+Again, you may want to have a look at the @file{.la} file in order
+to see what Libtool stores in it.  In particular, you will see that
+Libtool uses this file to remember the destination directory for the
+library (the argument to @option{-rpath}) as well as the dependency
+on the math library (@samp{-lm}).
+
+@node Linking executables
+@section Linking executables
+
+@cindex linking against installed libraries
+If you choose at this point to @dfn{install} the library (put it in a
+permanent location) before linking executables against it, then you
+don't need to use libtool to do the linking.  Simply use the appropriate
+@option{-L} and @option{-l} flags to specify the library's location.
+
+@cindex buggy system linkers
+Some system linkers insist on encoding the full directory name of each
+shared library in the resulting executable.  Libtool has to work around
+this misfeature by special magic to ensure that only permanent directory
+names are put into installed executables.
+
+@cindex security problems with buggy linkers
+@cindex bugs, subtle ones caused by buggy linkers
+The importance of this bug must not be overlooked: it won't cause
+programs to crash in obvious ways.  It creates a security hole,
+and possibly even worse, if you are modifying the library source code
+after you have installed the package, you will change the behaviour of
+the installed programs!
+
+So, if you want to link programs against the library before you install
+it, you must use libtool to do the linking.
+
+@cindex linking against uninstalled libraries
+Here's the old way of linking against an uninstalled library:
+
+@example
+burger$ @kbd{gcc -g -O -o hell.old main.o libhello.a -lm}
+burger$
+@end example
+
+Libtool's way is almost the same@footnote{However, you should avoid using
+@option{-L} or @option{-l} flags to link against an uninstalled libtool
+library.  Just specify the relative path to the @file{.la} file, such as
+@file{../intl/libintl.la}.  This is a design decision to eliminate any
+ambiguity when linking against uninstalled shared libraries.}
+(@pxref{Link mode}):
+
+@example
+a23$ @kbd{libtool --mode=link gcc -g -O -o hell main.o libhello.la}
+gcc -g -O -o hell main.o  ./@value{objdir}/libhello.a -lm
+a23$
+@end example
+
+That looks too simple to be true.  All libtool did was transform
+@file{libhello.la} to @file{./@value{objdir}/libhello.a}, but remember
+that @samp{a23} has no shared libraries.  Notice that Libtool also
+remembered that @file{libhello.la} depends on @option{-lm}, so even
+though we didn't specify @option{-lm} on the libtool command
+line@footnote{
+@c
+And why should we? @file{main.o} doesn't directly depend on @option{-lm}
+after all.
+@c
+} Libtool has added it to the @command{gcc} link line for us.
+
+On @samp{burger} Libtool links against the uninstalled shared library:
+
+@example
+burger$ @kbd{libtool --mode=link gcc -g -O -o hell main.o libhello.la}
+gcc -g -O -o @value{objdir}/hell main.o -L./@value{objdir} -R/usr/local/lib -lhello -lm
+creating hell
+burger$
+@end example
+
+@cindex linking with installed libtool libraries
+Now assume @file{libhello.la} had already been installed, and you want
+to link a new program with it.  You could figure out where it lives by
+yourself, then run:
+
+@example
+burger$ @kbd{gcc -g -O -o test test.o -L/usr/local/lib -lhello -lm}
+@end example
+
+However, unless @file{/usr/local/lib} is in the standard library search
+path, you won't be able to run @code{test}.  However, if you use libtool
+to link the already-installed libtool library, it will do The Right
+Thing (TM) for you:
+
+@example
+burger$ @kbd{libtool --mode=link gcc -g -O -o test test.o \
+                /usr/local/lib/libhello.la}
+gcc -g -O -o @value{objdir}/test test.o -Wl,--rpath \
+        -Wl,/usr/local/lib /usr/local/lib/libhello.a -lm
+creating test
+burger$
+@end example
+
+Note that libtool added the necessary run-time path flag, as well as
+@option{-lm}, the library libhello.la depended upon.  Nice, huh?
+
+@cindex wrapper scripts for programs
+@cindex program wrapper scripts
+Notice that the executable, @code{hell}, was actually created in the
+@file{@value{objdir}} subdirectory.  Then, a wrapper script (or, on
+certain platforms, a wrapper executable @pxref{Wrapper executables}) was
+created in the current directory.
+
+Since libtool created a wrapper script, you should use libtool to
+install it and debug it too.  However, since the program does not depend
+on any uninstalled libtool library, it is probably usable even without
+the wrapper script.
+
+On NetBSD 1.2, libtool encodes the installation directory of
+@file{libhello}, by using the @samp{-R/usr/local/lib} compiler flag.
+Then, the wrapper script guarantees that the executable finds the
+correct shared library (the one in @file{./@value{objdir}}) until it is
+properly installed.
+
+Let's compare the two different programs:
+
+@example
+burger$ @kbd{time ./hell.old}
+Welcome to GNU Hell!
+** This is not GNU Hello.  There is no built-in mail reader. **
+        0.21 real         0.02 user         0.08 sys
+burger$ @kbd{time ./hell}
+Welcome to GNU Hell!
+** This is not GNU Hello.  There is no built-in mail reader. **
+        0.63 real         0.09 user         0.59 sys
+burger$
+@end example
+
+The wrapper script takes significantly longer to execute, but at least
+the results are correct, even though the shared library hasn't been
+installed yet.
+
+So, what about all the space savings that shared libraries are supposed
+to yield?
+
+@example
+burger$ @kbd{ls -l hell.old libhello.a}
+-rwxr-xr-x  1 gord  gord  15481 Nov 14 12:11 hell.old
+-rw-r--r--  1 gord  gord   4274 Nov 13 18:02 libhello.a
+burger$ @kbd{ls -l @value{objdir}/hell @value{objdir}/libhello.*}
+-rwxr-xr-x  1 gord  gord  11647 Nov 14 12:10 @value{objdir}/hell
+-rw-r--r--  1 gord  gord   4274 Nov 13 18:44 @value{objdir}/libhello.a
+-rwxr-xr-x  1 gord  gord  12205 Nov 13 18:44 @value{objdir}/libhello.so.0.0
+burger$
+@end example
+
+Well, that sucks.  Maybe I should just scrap this project and take up
+basket weaving.
+
+Actually, it just proves an important point: shared libraries incur
+overhead because of their (relative) complexity.  In this situation, the
+price of being dynamic is eight kilobytes, and the payoff is about four
+kilobytes.  So, having a shared @file{libhello} won't be an advantage
+until we link it against at least a few more programs.
+
+@menu
+* Wrapper executables::         Wrapper executables for some platforms.
+@end menu
+
+@node Wrapper executables
+@subsection Wrapper executables for uninstalled programs
+@cindex wrapper executables for uninstalled programs
+@cindex program wrapper executables
+
+Some platforms, notably those hosted on Windows such as Cygwin
+and MinGW, use a wrapper executable rather than a wrapper script
+to ensure proper operation of uninstalled programs linked by libtool
+against uninstalled shared libraries. The wrapper executable thus
+performs the same function as the wrapper script used on other
+platforms, but allows to satisfy the @command{make} rules for the
+program, whose name ends in @code{$(EXEEXT)}. The actual program
+executable is created below @value{objdir}, and its name will end
+in @code{$(EXEEXT)} and may or may not contain an @code{lt-} prefix.
+This wrapper executable sets various environment values so that the
+program executable may locate its (uninstalled) shared libraries,
+and then launches the program executable.
+
+The wrapper executable provides a debug mode, enabled by passing the
+command-line option @code{--lt-debug} (see below). When executing in
+debug mode, diagnostic information will be printed to @code{stderr}
+before the program executable is launched.
+
+Finally, the wrapper executable supports a number of command line
+options that may be useful when debugging the operation of the wrapper
+system. All of these options begin with @code{--lt-}, and if present
+they and their arguments will be removed from the argument list passed
+on to the program executable.  Therefore, the program executable may not
+employ command line options that begin with @code{--lt-}. (In fact, the
+wrapper executable will detect any command line options that begin with
+@code{--lt-} and abort with an error message if the option is not
+recognized). If this presents a problem, please contact the Libtool
+team at @value{BUGADDR}.
+
+These command line options include:
+
+@table @option
+@item --lt-dump-script
+Causes the wrapper to print a copy of the wrapper @emph{script}
+to @code{stdout}, and exit.
+
+@item --lt-debug
+Causes the wrapper to print diagnostic information to @code{stdout},
+before launching the program executable.
+
+@end table
+
+For consistency, both the wrapper @emph{script} and the wrapper
+@emph{executable} support these options.
+
+@node Debugging executables
+@section Debugging executables
+
+If @file{hell} was a complicated program, you would certainly want to
+test and debug it before installing it on your system.  In the above
+section, you saw how the libtool wrapper script makes it possible to run
+the program directly, but unfortunately, this mechanism interferes with
+the debugger:
+
+@example
+burger$ @kbd{gdb hell}
+GDB is free software and you are welcome to distribute copies of it
+ under certain conditions; type "show copying" to see the conditions.
+There is no warranty for GDB; type "show warranty" for details.
+GDB 4.16 (i386-unknown-netbsd), (C) 1996 Free Software Foundation, Inc.
+
+"hell": not in executable format: File format not recognized
+
+(gdb) @kbd{quit}
+burger$
+@end example
+
+Sad.  It doesn't work because GDB doesn't know where the executable
+lives.  So, let's try again, by invoking GDB directly on the executable:
+
+@example
+burger$ @kbd{gdb @value{objdir}/hell}
+GNU gdb 5.3 (i386-unknown-netbsd)
+Copyright 2002 Free Software Foundation, Inc.
+GDB is free software, covered by the GNU General Public License,
+and you are welcome to change it and/or distribute copies of it
+under certain conditions.  Type "show copying" to see the conditions.
+There is no warranty for GDB.  Type "show warranty" for details.
+(gdb) @kbd{break main}
+Breakpoint 1 at 0x8048547: file main.c, line 29.
+(gdb) @kbd{run}
+Starting program: /home/src/libtool/demo/.libs/hell
+/home/src/libtool/demo/.libs/hell: can't load library 'libhello.so.0'
+
+Program exited with code 020.
+(gdb) @kbd{quit}
+burger$
+@end example
+
+Argh.  Now GDB complains because it cannot find the shared library that
+@file{hell} is linked against.  So, we must use libtool in order to
+properly set the library path and run the debugger.  Fortunately, we can
+forget all about the @file{@value{objdir}} directory, and just run it on
+the executable wrapper (@pxref{Execute mode}):
+
+@example
+burger$ @kbd{libtool --mode=execute gdb hell}
+GNU gdb 5.3 (i386-unknown-netbsd)
+Copyright 2002 Free Software Foundation, Inc.
+GDB is free software, covered by the GNU General Public License,
+and you are welcome to change it and/or distribute copies of it
+under certain conditions.  Type "show copying" to see the conditions.
+There is no warranty for GDB.  Type "show warranty" for details.
+(gdb) @kbd{break main}
+Breakpoint 1 at 0x8048547: file main.c, line 29.
+(gdb) @kbd{run}
+Starting program: /home/src/libtool/demo/.libs/hell
+
+Breakpoint 1, main (argc=1, argv=0xbffffc40) at main.c:29
+29        printf ("Welcome to GNU Hell!\n");
+(gdb) @kbd{quit}
+The program is running.  Quit anyway (and kill it)? (y or n) @kbd{y}
+burger$
+@end example
+
+@node Installing libraries
+@section Installing libraries
+
+@pindex strip
+Installing libraries on a non-libtool system is quite
+straightforward@dots{} just copy them into place:@footnote{Don't
+strip static libraries though, or they will be unusable.}
+
+@pindex su
+@example
+burger$ @kbd{su}
+Password: @kbd{********}
+burger# @kbd{cp libhello.a /usr/local/lib/libhello.a}
+burger#
+@end example
+
+Oops, don't forget the @command{ranlib} command:
+
+@example
+burger# @kbd{ranlib /usr/local/lib/libhello.a}
+burger#
+@end example
+
+@pindex install
+Libtool installation is quite simple, as well.  Just use the
+@command{install} or @command{cp} command that you normally would
+(@pxref{Install mode}):
+
+@example
+a23# @kbd{libtool --mode=install cp libhello.la /usr/local/lib/libhello.la}
+cp libhello.la /usr/local/lib/libhello.la
+cp @value{objdir}/libhello.a /usr/local/lib/libhello.a
+ranlib /usr/local/lib/libhello.a
+a23#
+@end example
+
+Note that the libtool library @file{libhello.la} is also installed, to
+help libtool with uninstallation (@pxref{Uninstall mode}) and linking
+(@pxref{Linking executables}) and to help programs with dlopening
+(@pxref{Dlopened modules}).
+
+Here is the shared library example:
+
+@example
+burger# @kbd{libtool --mode=install install -c libhello.la \
+                /usr/local/lib/libhello.la}
+install -c @value{objdir}/libhello.so.0.0 /usr/local/lib/libhello.so.0.0
+install -c libhello.la /usr/local/lib/libhello.la
+install -c @value{objdir}/libhello.a /usr/local/lib/libhello.a
+ranlib /usr/local/lib/libhello.a
+burger#
+@end example
+
+@cindex stripping libraries
+@cindex libraries, stripping
+It is safe to specify the @option{-s} (strip symbols) flag if you use a
+BSD-compatible install program when installing libraries.
+Libtool will either ignore the @option{-s} flag, or will run a program
+that will strip only debugging and compiler symbols from the library.
+
+Once the libraries have been put in place, there may be some additional
+configuration that you need to do before using them.  First, you must
+make sure that where the library is installed actually agrees with the
+@option{-rpath} flag you used to build it.
+
+@cindex postinstallation
+@cindex installation, finishing
+@cindex libraries, finishing installation
+Then, running @samp{libtool -n finish @var{libdir}} can give you
+further hints on what to do (@pxref{Finish mode}):
+
+@example
+burger# @kbd{libtool -n finish /usr/local/lib}
+PATH="$PATH:/sbin" ldconfig -m /usr/local/lib
+-----------------------------------------------------------------
+Libraries have been installed in:
+   /usr/local/lib
+
+To link against installed libraries in a given directory, LIBDIR,
+you must use the `-LLIBDIR' flag during linking.
+
+ You will also need to do one of the following:
+   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
+     during execution
+   - add LIBDIR to the `LD_RUN_PATH' environment variable
+     during linking
+   - use the `-RLIBDIR' linker flag
+
+See any operating system documentation about shared libraries for
+more information, such as the ld and ld.so manual pages.
+-----------------------------------------------------------------
+burger#
+@end example
+
+After you have completed these steps, you can go on to begin using the
+installed libraries.  You may also install any executables that depend
+on libraries you created.
+
+@node Installing executables
+@section Installing executables
+
+If you used libtool to link any executables against uninstalled libtool
+libraries (@pxref{Linking executables}), you need to use libtool to
+install the executables after the libraries have been installed
+(@pxref{Installing libraries}).
+
+So, for our Ultrix example, we would run:
+
+@example
+a23# libtool --mode=install -c hell /usr/local/bin/hell
+install -c hell /usr/local/bin/hell
+a23#
+@end example
+
+On shared library systems that require wrapper scripts, libtool just
+ignores the wrapper script and installs the correct binary:
+
+@example
+burger# libtool --mode=install -c hell /usr/local/bin/hell
+install -c @value{objdir}/hell /usr/local/bin/hell
+burger#
+@end example
+
+
+@node Static libraries
+@section Linking static libraries
+
+@cindex static linking
+@cindex convenience libraries
+Why return to @command{ar} and @command{ranlib} silliness when you've had a
+taste of libtool?  Well, sometimes it is desirable to create a static
+archive that can never be shared.  The most frequent case is when you
+have a set of object files that you use to build several different
+libraries.  You can create a ``convenience library'' out of those
+objects, and link against that with the other libraries, instead of
+listing all the object files every time.
+
+If you just want to link this convenience library into programs, then
+you could just ignore libtool entirely, and use the old @command{ar} and
+@command{ranlib} commands (or the corresponding GNU Automake
+@samp{_LIBRARIES} rules).  You can even install a convenience library
+using GNU Libtool, though you probably don't want to and hence GNU
+Automake doesn't allow you to do so.
+
+@example
+burger$ @kbd{libtool --mode=install ./install-sh -c libhello.a \
+                /local/lib/libhello.a}
+./install-sh -c libhello.a /local/lib/libhello.a
+ranlib /local/lib/libhello.a
+burger$
+@end example
+
+Using libtool for static library installation protects your library from
+being accidentally stripped (if the installer used the @option{-s} flag),
+as well as automatically running the correct @command{ranlib} command.
+
+But libtool libraries are more than just collections of object files:
+they can also carry library dependency information, which old archives
+do not.  If you want to create a libtool static convenience library, you
+can omit the @option{-rpath} flag and use @option{-static} to indicate that
+you're only interested in a static library.  When you link a program
+with such a library, libtool will actually link all object files and
+dependency libraries into the program.
+
+If you omit both @option{-rpath} and @option{-static}, libtool will create a
+convenience library that can be used to create other libtool
+libraries, even shared ones.  Just like in the static case, the library
+behaves as an alias to a set of object files and dependency libraries,
+but in this case the object files are suitable for inclusion in shared
+libraries.  But be careful not to link a single convenience library,
+directly or indirectly, into a single program or library, otherwise you
+may get errors about symbol redefinitions.
+
+The key is remembering that a convenience library contains PIC
+objects, and can be linked where a list of PIC objects makes sense;
+i.e.@: into a shared library.  A static convenience library contains
+non-PIC objects, so can be linked into an old static library, or
+a program.
+
+When GNU Automake is used, you should use @code{noinst_LTLIBRARIES}
+instead of @code{lib_LTLIBRARIES} for convenience libraries, so that
+the @option{-rpath} option is not passed when they are linked.
+
+As a rule of thumb, link a libtool convenience library into at most one
+libtool library, and never into a program, and link libtool static
+convenience libraries only into programs, and only if you need to carry
+library dependency information to the user of the static convenience
+library.
+
+@cindex standalone binaries
+Another common situation where static linking is desirable is in
+creating a standalone binary.  Use libtool to do the linking and add the
+@option{-all-static} flag.
+
+@node Invoking libtool
+@chapter Invoking @command{libtool}
+@pindex libtool
+@cindex libtool command options
+@cindex options, libtool command
+@cindex command options, libtool
+
+The @command{libtool} program has the following synopsis:
+
+@example
+libtool [@var{option}]@dots{} [@var{mode-arg}]@dots{}
+@end example
+
+@noindent
+and accepts the following options:
+
+@table @option
+@item --config
+Display libtool configuration variables and exit.
+
+@item --debug
+Dump a trace of shell script execution to standard output.  This
+produces a lot of output, so you may wish to pipe it to @command{less} (or
+@command{more}) or redirect to a file.
+
+@item -n
+@itemx --dry-run
+Don't create, modify, or delete any files, just show what commands would
+be executed by libtool.
+
+@item --features
+Display basic configuration options.  This provides a way for packages
+to determine whether shared or static libraries will be built.
+
+@item --finish
+Same as @option{--mode=finish}.
+
+@item -h
+Display short help message.
+
+@item --help
+Display a help message and exit.  If @option{--mode=@var{mode}} is
+specified, then detailed help for @var{mode} is displayed.
+
+@item --help-all
+Display help for the general options as well as detailed help for each
+operation mode, and exit.
+
+@item --mode=@var{mode}
+Use @var{mode} as the operation mode.  When using libtool from the
+command line, you can give just @var{mode} (or a unique abbreviation
+of it) as the first argument as a shorthand for the full
+@option{--mode=@var{mode}}.  For example, the following are equivalent:
+
+@example
+$ @kbd{libtool --mode=execute --dry-run gdb prog.exe}
+$ @kbd{libtool        execute --dry-run gdb prog.exe}
+$ @kbd{libtool        exe     --dry-run gdb prog.exe}
+$ @kbd{libtool        e       --dry-run gdb prog.exe}
+@end example
+
+@noindent
+@var{mode} must be set to one of the following:
+
+@table @option
+@item compile
+Compile a source file into a libtool object.
+
+@item execute
+Automatically set the library path so that another program can use
+uninstalled libtool-generated programs or libraries.
+
+@item link
+Create a library or an executable.
+
+@item install
+Install libraries or executables.
+
+@item finish
+Complete the installation of libtool libraries on the system.
+
+@item uninstall
+Delete installed libraries or executables.
+
+@item clean
+Delete uninstalled libraries or executables.
+@end table
+
+@item --tag=@var{tag}
+Use configuration variables from tag @var{tag} (@pxref{Tags}).
+
+@item --preserve-dup-deps
+Do not remove duplicate dependencies in libraries.  When building packages
+with static libraries, the libraries may depend circularly on each other
+(shared libs can too, but for those it doesn't matter), so there are
+situations, where -la -lb -la is required, and the second -la may not be
+stripped or the link will fail.  In cases where these duplications are
+required, this option will preserve them, only stripping the libraries
+that libtool knows it can safely.
+
+@item --quiet
+@itemx --silent
+Do not print out any progress or informational messages.
+
+@item -v
+@itemx --verbose
+Print out progress and informational messages (enabled by default),
+as well as additional messages not ordinary seen by default.
+
+@item --no-quiet
+@itemx --no-silent
+Print out the progress and informational messages that are seen
+by default. This option has no effect on whether the additional
+messages seen in @option{--verbose} mode are shown.
+
+@item --no-verbose
+Do not print out any additional informational messages beyond
+those ordinarily seen by default. This option has no effect
+on whether the ordinary progress and informational messages
+enabled by @option{--no-quiet} are shown.
+
+Thus, there are now three different message levels (not counting
+@option{--debug}), depending on whether the normal messages and/or
+the additional verbose messages are displayed.  Note that there is
+no mechanism to diplay verbose messages, without also displaying
+normal messages.
+
+@table @strong
+@item default
+Normal messages are displayed, verbose messages are not displayed.
+In addition to being the default mode, it can be forcibly achieved
+by using both option @option{--no-verbose} and either option
+@option{--no-silent} or option @option{--no-quiet}.
+
+@item silent
+Neither normal messages nor verbose messages are displayed. This
+mode can be achieved using either option @option{--silent} or
+option @option{--quiet}.
+
+@item verbose
+Both normal messages and verbose messages are displayed. This mode
+can be achieved using either option @option{-v} or option
+@option{--verbose}.
+@end table
+
+@item --version
+Print libtool version information and exit.
+@end table
+
+The current @command{libtool} implementation is done with a shell script
+that needs to be invoked by the shell which @command{configure} chose for
+configuring @command{libtool} (@pxref{config.status Invocation, , The
+Autoconf Manual, autoconf, The Autoconf Manual}).  This shell is set in
+the she-bang (@samp{#!}) line of the @command{libtool} script.  Using a
+different shell may cause undefined behavior.
+
+The @var{mode-args} are a variable number of arguments, depending on the
+selected operation mode.  In general, each @var{mode-arg} is interpreted
+by programs libtool invokes, rather than libtool itself.
+
+@menu
+* Compile mode::                Creating library object files.
+* Link mode::                   Generating executables and libraries.
+* Execute mode::                Debugging libtool-generated programs.
+* Install mode::                Making libraries and executables public.
+* Finish mode::                 Completing a library installation.
+* Uninstall mode::              Removing installed executables and libraries.
+* Clean mode::                  Removing uninstalled executables and libraries.
+@end menu
+
+@node Compile mode
+@section Compile mode
+@cindex mode, compile
+@cindex compile mode
+
+For @dfn{compile} mode, @var{mode-args} is a compiler command to be used
+in creating a ``standard'' object file.  These arguments should begin with
+the name of the C compiler, and contain the @option{-c} compiler flag so
+that only an object file is created.
+
+Libtool determines the name of the output file by removing the directory
+component from the source file name, then substituting the source code
+suffix (e.g.@: @samp{.c} for C source code) with the library object suffix,
+@samp{.lo}.
+
+If shared libraries are being built, any necessary PIC generation flags
+are substituted into the compilation command.
+
+The following components of @var{mode-args} are treated specially:
+
+@table @option
+@item -o
+Note that the @option{-o} option is now fully supported.  It is emulated
+on the platforms that don't support it (by locking and moving the
+objects), so it is really easy to use libtool, just with minor
+modifications to your Makefiles.  Typing for example
+@example
+libtool --mode=compile gcc -c foo/x.c -o foo/x.lo
+@end example
+will do what you expect.
+
+Note, however, that, if the compiler does not support @option{-c} and
+@option{-o}, it is impossible to compile @file{foo/x.c} without
+overwriting an existing @file{./x.o}.  Therefore, if you do have a
+source file @file{./x.c}, make sure you introduce dependencies in your
+@file{Makefile} to make sure @file{./x.o} (or @file{./x.lo}) is
+re-created after any sub-directory's @file{x.lo}:
+
+@example
+x.o x.lo: foo/x.lo bar/x.lo
+@end example
+
+@noindent
+This will also ensure that make won't try to use a temporarily corrupted
+@file{x.o} to create a program or library.  It may cause needless
+recompilation on platforms that support @option{-c} and @option{-o}
+together, but it's the only way to make it safe for those that don't.
+
+@item -no-suppress
+If both PIC and non-PIC objects are being built, libtool will normally
+suppress the compiler output for the PIC object compilation to save
+showing very similar, if not identical duplicate output for each
+object.  If the @option{-no-suppress} option is given in compile mode,
+libtool will show the compiler output for both objects.
+
+@item -prefer-pic
+Libtool will try to build only PIC objects.
+
+@item -prefer-non-pic
+Libtool will try to build only non-PIC objects.
+
+@item -shared
+Even if Libtool was configured with @option{--enable-static}, the object
+file Libtool builds will not be suitable for static linking.  Libtool
+will signal an error if it was configured with @option{--disable-shared},
+or if the host does not support shared libraries.
+
+@item -static
+Even if libtool was configured with @option{--disable-static}, the
+object file Libtool builds @strong{will} be suitable for static
+linking.
+
+@item -Wc,@var{flag}
+@itemx -Xcompiler @var{flag}
+Pass a flag directly to the compiler.  With @code{-Wc,}, multiple flags
+may be separated by commas, whereas @code{-Xcompiler } passes through
+commas unchanged.
+@end table
+
+@node Link mode
+@section Link mode
+@cindex link mode
+@cindex mode, link
+
+@dfn{Link} mode links together object files (including library
+objects) to form another library or to create an executable program.
+
+@var{mode-args} consist of a command using the C compiler to create an
+output file (with the @option{-o} flag) from several object files.
+
+The following components of @var{mode-args} are treated specially:
+
+@table @option
+@cindex undefined symbols, allowing
+@cindex unresolved symbols, allowing
+@item -all-static
+If @var{output-file} is a program, then do not link it against any
+shared libraries at all.  If @var{output-file} is a library, then only
+create a static library.  In general, this flag cannot be used together
+with @samp{disable-static} (@pxref{LT_INIT}).
+
+@item -avoid-version
+Tries to avoid versioning (@pxref{Versioning}) for libraries and modules,
+i.e.@: no version information is stored and no symbolic links are created.
+If the platform requires versioning, this option has no effect.
+
+@item -bindir
+Pass the absolute name of the directory for installing executable
+programs (@pxref{Directory Variables, , Directory Variables, standards,
+The GNU Coding Standards}).  @command{libtool} may use this value to
+install shared libraries there on systems that do not provide for any
+library hardcoding and use the directory of a program and the @env{PATH}
+variable as library search path.  This is typically used for DLLs on
+Windows or other systems using the PE (Portable Executable) format.
+On other systems, @option{-bindir} is ignored.  The default value used
+is @file{@var{libdir}/../bin} for libraries installed to
+@file{@var{libdir}}.  You should not use @option{-bindir} for modules.
+
+@item -dlopen @var{file}
+Same as @option{-dlpreopen @var{file}}, if native dlopening is not
+supported on the host platform (@pxref{Dlopened modules}) or if
+the program is linked with @option{-static},
+@option{-static-libtool-libs}, or @option{-all-static}.  Otherwise, no
+effect.  If @var{file} is @code{self} Libtool will make sure that the
+program can @code{dlopen} itself, either by enabling
+@option{-export-dynamic} or by falling back to @option{-dlpreopen self}.
+
+@item -dlpreopen @var{file}
+Link @var{file} into the output program, and add its symbols to the
+list of preloaded symbols (@pxref{Dlpreopening}).  If @var{file} is
+@code{self}, the symbols of the program itself will be added to
+preloaded symbol lists.  If @var{file} is @code{force} Libtool will
+make sure that a preloaded symbol list is always @emph{defined},
+regardless of whether it's empty or not.
+
+@item -export-dynamic
+Allow symbols from @var{output-file} to be resolved with @code{dlsym}
+(@pxref{Dlopened modules}).
+
+@item -export-symbols @var{symfile}
+Tells the linker to export only the symbols listed in @var{symfile}.
+The symbol file should end in @file{.sym} and must contain the name of one
+symbol per line.  This option has no effect on some platforms.
+By default all symbols are exported.
+
+@item -export-symbols-regex @var{regex}
+Same as @option{-export-symbols}, except that only symbols matching
+the regular expression @var{regex} are exported.
+By default all symbols are exported.
+
+@item -L@var{libdir}
+Search @var{libdir} for required libraries that have already been
+installed.
+
+@item -l@var{name}
+@var{output-file} requires the installed library @file{lib@var{name}}.
+This option is required even when @var{output-file} is not an
+executable.
+
+@item -module
+Creates a library that can be dlopened (@pxref{Dlopened modules}).
+This option doesn't work for programs.
+Module names don't need to be prefixed with @samp{lib}.
+In order to prevent name clashes, however, @file{lib@var{name}} and @file{@var{name}}
+must not be used at the same time in your package.
+
+@item -no-fast-install
+Disable fast-install mode for the executable @var{output-file}.  Useful
+if the program won't be necessarily installed.
+
+@item -no-install
+Link an executable @var{output-file} that can't be installed and
+therefore doesn't need a wrapper script on systems that allow hardcoding
+of library paths.  Useful if the program is only used in the build tree,
+e.g., for testing or generating other files.
+
+@item -no-undefined
+Declare that @var{output-file} does not depend on any libraries other
+than the ones listed on the command line, i.e., after linking, it will
+not have unresolved symbols.  Some platforms require all symbols in
+shared libraries to be resolved at library creation (@pxref{Inter-library
+dependencies}), and using this parameter allows @command{libtool} to
+assume that this will not happen.
+
+@item -o @var{output-file}
+Create @var{output-file} from the specified objects and libraries.
+
+@item -objectlist @var{file}
+Use a list of object files found in @var{file} to specify objects.
+
+@item -precious-files-regex @var{regex}
+Prevents removal of files from the temporary output directory whose
+names match this regular expression.  You might specify @samp{\.bbg?$}
+to keep those files created with @code{gcc -ftest-coverage} for example.
+
+@item -release @var{release}
+Specify that the library was generated by release @var{release} of your
+package, so that users can easily tell which versions are newer than
+others.  Be warned that no two releases of your package will be binary
+compatible if you use this flag.  If you want binary compatibility, use
+the @option{-version-info} flag instead (@pxref{Versioning}).
+
+@item -rpath @var{libdir}
+If @var{output-file} is a library, it will eventually be installed in
+@var{libdir}.  If @var{output-file} is a program, add @var{libdir} to
+the run-time path of the program.  On platforms that don't support
+hardcoding library paths into executables and only search PATH for
+shared libraries, such as when @var{output-file} is a Windows (or
+other PE platform) DLL, the @file{.la} control file will be installed in
+@var{libdir}, but see @option{-bindir} above for the eventual destination
+of the @file{.dll} or other library file itself.
+
+@item -R @var{libdir}
+If @var{output-file} is a program, add @var{libdir} to its run-time
+path.  If @var{output-file} is a library, add @option{-R@var{libdir}} to its
+@var{dependency_libs}, so that, whenever the library is linked into a
+program, @var{libdir} will be added to its run-time path.
+
+@item -shared
+If @var{output-file} is a program, then link it against any
+uninstalled shared libtool libraries (this is the default behavior).
+If @var{output-file} is a library, then only create a shared library.
+In the later case, libtool will signal an error if it was configured
+with @option{--disable-shared}, or if the host does not support shared
+libraries.
+
+@item -shrext @var{suffix}
+If @var{output-file} is a libtool library, replace the system's standard
+file name extension for shared libraries with @var{suffix} (most systems
+use @file{.so} here).  This option is helpful in certain cases where an
+application requires that shared libraries (typically modules) have an
+extension other than the default one.  Please note you must supply the
+full file name extension including any leading dot.
+
+@item -static
+If @var{output-file} is a program, then do not link it against any
+uninstalled shared libtool libraries.  If @var{output-file} is a
+library, then only create a static library.
+
+@item -static-libtool-libs
+If @var{output-file} is a program, then do not link it against any
+shared libtool libraries.  If @var{output-file} is a library, then only
+create a static library.
+
+@item -version-info @var{current}[:@var{revision}[:@var{age}]]
+If @var{output-file} is a libtool library, use interface version
+information @var{current}, @var{revision}, and @var{age} to build it
+(@pxref{Versioning}).  Do @strong{not} use this flag to specify package
+release information, rather see the @option{-release} flag.
+
+@item -version-number @var{major}[:@var{minor}[:@var{revision}]]
+If @var{output-file} is a libtool library, compute interface version
+information so that the resulting library uses the specified major, minor and
+revision numbers.  This is designed to permit libtool to be used with
+existing projects where identical version numbers are already used across
+operating systems.  New projects should use the @option{-version-info} flag
+instead.
+
+@item -weak @var{libname}
+if @var{output-file} is a libtool library, declare that it provides a
+weak @var{libname} interface.  This is a hint to libtool that there is
+no need to append @var{libname} to the list of dependency libraries of
+@var{output-file}, because linking against @var{output-file} already
+supplies the same interface (@pxref{Linking with dlopened modules}).
+
+@item -Wc,@var{flag}
+@itemx -Xcompiler @var{flag}
+Pass a linker-specific flag directly to the compiler.  With @code{-Wc,},
+multiple flags may be separated by commas, whereas @code{-Xcompiler }
+passes through commas unchanged.
+
+@item -Wl,@var{flag}
+@itemx -Xlinker @var{flag}
+Pass a linker-specific flag directly to the linker.
+
+@item -XCClinker @var{flag}
+Pass a link-specific flag to the compiler driver (@code{CC}) during linking.
+@end table
+
+If the @var{output-file} ends in @file{.la}, then a libtool library is
+created, which must be built only from library objects (@file{.lo} files).
+The @option{-rpath} option is required.  In the current implementation,
+libtool libraries may not depend on other uninstalled libtool libraries
+(@pxref{Inter-library dependencies}).
+
+If the @var{output-file} ends in @file{.a}, then a standard library is
+created using @code{ar} and possibly @code{ranlib}.
+
+@cindex partial linking
+@cindex linking, partial
+If @var{output-file} ends in @file{.o} or @file{.lo}, then a reloadable object
+file is created from the input files (generally using @samp{ld -r}).
+This method is often called @dfn{partial linking}.
+
+Otherwise, an executable program is created.
+
+@node Execute mode
+@section Execute mode
+@cindex execute mode
+@cindex mode, execute
+
+For @dfn{execute} mode, the library path is automatically set, then a
+program is executed.
+
+The first of the @var{mode-args} is treated as a program name, with the
+rest as arguments to that program.
+
+The following components of @var{mode-args} are treated specially:
+
+@table @option
+@item -dlopen @var{file}
+Add the directory containing @var{file} to the library path.
+@end table
+
+This mode sets the library path environment variable according to any
+@option{-dlopen} flags.
+
+If any of the @var{args} are libtool executable wrappers, then they are
+translated into the name of their corresponding uninstalled binary, and
+any of their required library directories are added to the library path.
+
+@node Install mode
+@section Install mode
+@cindex install mode
+@cindex mode, install
+
+In @dfn{install} mode, libtool interprets most of the elements of
+@var{mode-args} as an installation command beginning with
+@command{cp}, or a BSD-compatible @command{install} program.
+
+The following components of @var{mode-args} are treated specially:
+
+@table @option
+@item -inst-prefix-dir @var{inst-prefix-dir}
+When installing into a temporary staging area, rather than the
+final @code{prefix}, this argument is used to reflect the
+temporary path, in much the same way @command{automake} uses
+@env{DESTDIR}.  For instance, if @code{prefix} is @file{/usr/local},
+but @var{inst-prefix-dir} is @file{/tmp}, then the object will be
+installed under @file{/tmp/usr/local/}.  If the installed object
+is a libtool library, then the internal fields of that library
+will reflect only @code{prefix}, not @var{inst-prefix-dir}:
+
+@example
+# Directory that this library needs to be installed in:
+libdir='/usr/local/lib'
+@end example
+
+not
+
+@example
+# Directory that this library needs to be installed in:
+libdir='/tmp/usr/local/lib'
+@end example
+
+@code{inst-prefix} is also used to insure that if the installed
+object must be relinked upon installation, that it is relinked
+against the libraries in @var{inst-prefix-dir}/@code{prefix},
+not @code{prefix}.
+
+In truth, this option is not really intended for use when calling
+libtool directly; it is automatically used when @code{libtool --mode=install}
+calls @code{libtool --mode=relink}.  Libtool does this by
+analyzing the destination path given in the original
+@code{libtool --mode=install} command and comparing it to the
+expected installation path established during @code{libtool --mode=link}.
+
+Thus, end-users need change nothing, and @command{automake}-style
+@code{make install DESTDIR=/tmp} will Just Work(tm) most of the time.
+For systems where fast installation can not be turned on, relinking
+may be needed.  In this case, a @samp{DESTDIR} install will fail.
+
+Currently it is not generally possible to install into a temporary
+staging area that contains needed third-party libraries which are
+not yet visible at their final location.
+@end table
+
+The rest of the @var{mode-args} are interpreted as arguments to the
+@command{cp} or @command{install} command.
+
+The command is run, and any necessary unprivileged post-installation
+commands are also completed.
+
+@node Finish mode
+@section Finish mode
+@cindex finish mode
+@cindex mode, finish
+
+@dfn{Finish} mode has two functions.  One is to help system administrators
+install libtool libraries so that they can be located and linked into
+user programs.  To invoke this functionality, pass the name of a library
+directory as @var{mode-arg}.  Running this command may require superuser
+privileges, and the @option{--dry-run} option may be useful.
+
+The second is to facilitate transferring libtool libraries to a native
+compilation environment after they were built in a cross-compilation
+environment.  Cross-compilation environments may rely on recent libtool
+features, and running libtool in finish mode will make it easier to
+work with older versions of libtool.  This task is performed whenever
+the @var{mode-arg} is a @file{.la} file.
+
+@node Uninstall mode
+@section Uninstall mode
+@cindex uninstall mode
+@cindex mode, uninstall
+
+@dfn{Uninstall} mode deletes installed libraries, executables and objects.
+
+The first @var{mode-arg} is the name of the program to use to delete
+files (typically @command{/bin/rm}).
+
+The remaining @var{mode-args} are either flags for the deletion program
+(beginning with a @samp{-}), or the names of files to delete.
+
+@node Clean mode
+@section Clean mode
+@cindex clean mode
+@cindex mode, clean
+
+@dfn{Clean} mode deletes uninstalled libraries, executables, objects
+and libtool's temporary files associated with them.
+
+The first @var{mode-arg} is the name of the program to use to delete
+files (typically @command{/bin/rm}).
+
+The remaining @var{mode-args} are either flags for the deletion program
+(beginning with a @samp{-}), or the names of files to delete.
+
+@node Integrating libtool
+@chapter Integrating libtool with your package
+
+This chapter describes how to integrate libtool with your packages so
+that your users can install hassle-free shared libraries.
+
+There are several ways in which Libtool may be integrated in your
+package, described in the following sections.  Typically, the Libtool
+macro files as well as @file{ltmain.sh} are copied into your package
+using @command{libtoolize} and @command{aclocal} after setting up the
+@file{configure.ac} and toplevel @file{Makefile.am}, then
+@command{autoconf} adds the needed tests to the @file{configure} script.
+These individual steps are often automated with @command{autoreconf}.
+
+Here is a diagram showing how such a typical Libtool configuration works
+when preparing a package for distribution, assuming that @file{m4} has
+been chosen as location for additional Autoconf macros, and
+@file{build-aux} as location for auxiliary build tools (@pxref{Input,,
+The Autoconf Manual, autoconf, The Autoconf Manual}):
+
+@example
+@group
+libtool.m4 -----.                .--> aclocal.m4 -----.
+ltoptions.m4 ---+  .-> aclocal* -+                    +--> autoconf*
+ltversion.m4 ---+--+             `--> [copy in m4/] --+       |
+ltsugar.m4 -----+  |                    ^             |       \/
+lt~obsolete.m4 -+  +-> libtoolize* -----'             |    configure
+[ltdl.m4] ------+  |                                  |
+                   `----------------------------------'
+
+ltmain.sh -----------> libtoolize* -> [copy in build-aux/]
+@end group
+@end example
+
+During configuration, the @file{libtool} script is generated either
+through @command{config.status} or @command{config.lt}:
+
+@example
+@group
+             .--> config.status* --.
+configure* --+                     +--> libtool
+             `--> [config.lt*] ----'      ^
+                                          |
+ltmain.sh --------------------------------'
+@end group
+@end example
+
+At @command{make} run time, @command{libtool} is then invoked as needed
+as a wrapper around compilers, linkers, install and cleanup programs.
+
+There are alternatives choices to several parts of the setup; for
+example, the Libtool macro files can either be copied or symlinked into
+the package, or copied into @file{aclocal.m4}.  As another example, an
+external, pre-configured @command{libtool} script may be used,
+by-passing most of the tests and package-specific setup for Libtool.
+
+@menu
+* Autoconf macros::             Autoconf macros exported by libtool.
+* Makefile rules::              Writing @file{Makefile} rules for libtool.
+* Using Automake::              Automatically supporting libtool.
+* Configuring::                 Configuring libtool for a host system.
+* Distributing::                What files to distribute with your package.
+* Static-only libraries::       Sometimes shared libraries are just a pain.
+@end menu
+
+@node Autoconf macros
+@section Autoconf macros exported by libtool
+
+Libtool uses a number of macros to interrogate the host system when it
+is being built, and you can use some of them yourself too.  Although
+there are a great many other macros in the libtool installed m4 files,
+these do not form part of the published interface, and are subject to
+change between releases.
+
+@noindent
+Macros in the @samp{LT_CMD_} namespace check for various shell
+commands:
+
+@defmac LT_CMD_MAX_LEN
+Finds the longest command line that can be safely passed to
+@samp{$SHELL} without being truncated, and store in the shell variable
+@samp{$max_cmd_len}.  It is only an approximate value, but command
+lines of this length or shorter are guaranteed not to be truncated.
+@end defmac
+
+@noindent
+Macros in the @samp{LT_FUNC_} namespace check characteristics of
+library functions:
+
+@defmac LT_FUNC_DLSYM_USCORE
+@samp{AC_DEFINE} the preprocessor symbol @samp{DLSYM_USCORE} if we
+have to add an underscore to symbol-names passed in to @samp{dlsym}.
+@end defmac
+
+@noindent
+Macros in the @samp{LT_LIB_} namespace check characteristics of system
+libraries:
+
+@defmac LT_LIB_M
+Set @samp{LIBM} to the math library or libraries required on this
+machine, if any.
+@end defmac
+
+@defmac LT_LIB_DLLOAD
+This is the macro used by @samp{libltdl} to determine which dlloaders
+to use on this machine, if any.  Several shell variables are set (and
+@samp{AC_SUBST}ed) depending on the dlload interfaces are available on
+this machine.  @samp{LT_DLLOADERS} contains a list of libtool
+libraries that can be used, and if necessary also sets
+@samp{LIBADD_DLOPEN} if additional system libraries are required by
+the @samp{dlopen} loader, and @samp{LIBADD_SHL_LOAD} if additional
+system libraries are required by the @samp{shl_load} loader,
+respectively.  Finally some symbols are set in @file{config.h}
+depending on the loaders that are found to work: @samp{HAVE_LIBDL},
+@samp{HAVE_SHL_LOAD}, @samp{HAVE_DYLD}, @samp{HAVE_DLD}.
+@end defmac
+
+@noindent
+Macros in the @samp{LT_PATH_} namespace search the system for the full
+path to particular system commands:
+
+@defmac LT_PATH_LD
+Add a @option{--with-gnu-ld} option to @file{configure}.  Try to find
+the path to the linker used by @samp{$CC}, and whether it is the
+GNU linker.  The result is stored in the shell variable
+@samp{$LD}, which is @code{AC_SUBST}ed.
+@end defmac
+
+@defmac LT_PATH_NM
+Try to find a BSD-compatible @command{nm} or a MS-compatible
+@command{dumpbin} command on this machine.  The result is stored in the
+shell variable @samp{$NM}, which is @code{AC_SUBST}ed.
+@end defmac
+
+@noindent
+Macros in the @samp{LT_SYS_} namespace probe for system
+characteristics:
+
+@defmac LT_SYS_DLOPEN_SELF
+Tests whether a program can dlopen itself, and then also whether the
+same program can still dlopen itself when statically linked.  Results
+are stored in the shell variables @samp{$enable_dlopen_self} and
+@samp{enable_dlopen_self_static} respectively.
+@end defmac
+
+@defmac LT_SYS_DLOPEN_DEPLIBS
+Define the preprocessor symbol @samp{LTDL_DLOPEN_DEPLIBS} if the
+OS needs help to load dependent libraries for @samp{dlopen} (or
+equivalent).
+@end defmac
+
+@defmac LT_SYS_DLSEARCH_PATH
+Define the preprocessor symbol @samp{LT_DLSEARCH_PATH} to the system
+default library search path.
+@end defmac
+
+@defmac LT_SYS_MODULE_EXT
+Define the preprocessor symbol @samp{LT_MODULE_EXT} to the extension
+used for runtime loadable modules.  If you use libltdl to open
+modules, then you can simply use the libtool library extension,
+@file{.la}.
+@end defmac
+
+@defmac LT_SYS_MODULE_PATH
+Define the preprocessor symbol @samp{LT_MODULE_PATH_VAR} to the name
+of the shell environment variable that determines the run-time module
+search path.
+@end defmac
+
+@defmac LT_SYS_SYMBOL_USCORE
+Set the shell variable @samp{sys_symbol_underscore} to @samp{no}
+unless the compiler prefixes global symbols with an underscore.
+@end defmac
+
+
+@node Makefile rules
+@section Writing @file{Makefile} rules for libtool
+@cindex Makefile
+@cindex Makefile.am
+@cindex Makefile.in
+
+Libtool is fully integrated with Automake (@pxref{Top,, Introduction,
+automake, The Automake Manual}), starting with Automake version 1.2.
+
+If you want to use libtool in a regular @file{Makefile} (or
+@file{Makefile.in}), you are on your own.  If you're not using
+Automake, and you don't know how to incorporate libtool into your
+package you need to do one of the following:
+
+@enumerate 1
+@item
+Download the latest Automake distribution from your nearest GNU
+mirror, install it, and start using it.
+
+@item
+Learn how to write @file{Makefile} rules by hand.  They're sometimes complex,
+but if you're clever enough to write rules for compiling your old
+libraries, then you should be able to figure out new rules for libtool
+libraries (hint: examine the @file{Makefile.in} in the @file{tests/demo}
+subdirectory of the libtool distribution@dots{} note especially that it
+was automatically generated from the @file{Makefile.am} by Automake).
+@end enumerate
+
+@node Using Automake
+@section Using Automake with libtool
+
+@vindex LTLIBRARIES
+Libtool library support is implemented under the @samp{LTLIBRARIES}
+primary.
+
+Here are some samples from the Automake @file{Makefile.am} in the
+libtool distribution's @file{demo} subdirectory.
+
+First, to link a program against a libtool library, just use the
+@samp{program_LDADD}@footnote{@c
+@c
+Since GNU Automake 1.5, the flags @option{-dlopen}
+or @option{-dlpreopen} (@pxref{Link mode}) can be employed with the
+@samp{program_LDADD} variable.  Unfortunately, older releases didn't
+accept these flags, so if you are stuck with an ancient Automake, we
+recommend quoting the flag itself, and setting
+@samp{program_DEPENDENCIES} too:
+
+@example
+program_LDADD = "-dlopen" libfoo.la
+program_DEPENDENCIES = libfoo.la
+@end example
+@c
+} variable:
+
+@example
+bin_PROGRAMS = hell hell_static
+
+# Build hell from main.c and libhello.la
+hell_SOURCES = main.c
+hell_LDADD = libhello.la
+
+# Create a statically linked version of hell.
+hell_static_SOURCES = main.c
+hell_static_LDADD = libhello.la
+hell_static_LDFLAGS = -static
+@end example
+
+You may use the @samp{program_LDFLAGS} variable to stuff in any flags
+you want to pass to libtool while linking @file{program} (such as
+@option{-static} to avoid linking uninstalled shared libtool libraries).
+
+Building a libtool library is almost as trivial@dots{} note the use of
+@samp{libhello_la_LDFLAGS} to pass the @option{-version-info}
+(@pxref{Versioning}) option to libtool:
+
+@example
+# Build a libtool library, libhello.la for installation in libdir.
+lib_LTLIBRARIES = libhello.la
+libhello_la_SOURCES = hello.c foo.c
+libhello_la_LDFLAGS = -version-info 3:12:1
+@end example
+
+The @option{-rpath} option is passed automatically by Automake (except for
+libraries listed as @code{noinst_LTLIBRARIES}), so you
+should not specify it.
+
+@xref{A Shared Library, Building a Shared Library, The Automake Manual,
+automake, The Automake Manual}, for more information.
+
+@node Configuring
+@section Configuring libtool
+@cindex configuring libtool
+
+Libtool requires intimate knowledge of your compiler suite and operating
+system in order to be able to create shared libraries and link against
+them properly.  When you install the libtool distribution, a
+system-specific libtool script is installed into your binary directory.
+
+However, when you distribute libtool with your own packages
+(@pxref{Distributing}), you do not always know the compiler suite and
+operating system that are used to compile your package.
+
+For this reason, libtool must be @dfn{configured} before it can be
+used.  This idea should be familiar to anybody who has used a GNU
+@code{configure} script.  @code{configure} runs a number of tests for
+system features, then generates the @file{Makefile}s (and possibly a
+@file{config.h} header file), after which you can run @code{make} and
+build the package.
+
+Libtool adds its own tests to your @code{configure} script in order to
+generate a libtool script for the installer's host machine.
+
+@menu
+* LT_INIT::                     Configuring @code{libtool} in @file{configure.ac}.
+* Configure notes::             Platform-specific notes for configuration.
+@end menu
+
+@node LT_INIT
+@subsection The @code{LT_INIT} macro
+
+If you are using GNU Autoconf (or Automake), you should add a call to
+@code{LT_INIT} to your @file{configure.ac} file.  This macro
+adds many new tests to the @code{configure} script so that the generated
+libtool script will understand the characteristics of the host.  It's the
+most important of a number of macros defined by Libtool:
+
+@defmac LT_PREREQ (@var{version})
+Ensure that a recent enough version of Libtool is being used.  If the
+version of Libtool used for @code{LT_INIT} is earlier than
+@var{version}, print an error message to the standard
+error output and exit with failure (exit status is 63).  For example:
+
+@example
+LT_PREREQ([@value{VERSION}])
+@end example
+@end defmac
+
+@defmac LT_INIT (@var{options})
+@defmacx AC_PROG_LIBTOOL
+@defmacx AM_PROG_LIBTOOL
+Add support for the @option{--enable-shared}, @option{--disable-shared},
+@option{--enable-static}, @option{--disable-static}, @option{--with-pic}, and
+@option{--without-pic} @code{configure} flags.@footnote{@code{LT_INIT} requires
+that you define the @file{Makefile} variable @code{top_builddir} in your
+@file{Makefile.in}.  Automake does this automatically, but Autoconf
+users should set it to the relative path to the top of your build
+directory (@file{../..}, for example).}  @code{AC_PROG_LIBTOOL} and
+@code{AM_PROG_LIBTOOL} are deprecated names for older versions of this macro;
+@code{autoupdate} will upgrade your @file{configure.ac} files.
+
+By default, this macro turns on shared libraries if they are available,
+and also enables static libraries if they don't conflict with the shared
+libraries.  You can modify these defaults by passing either
+@code{disable-shared} or @code{disable-static} in the option list to
+@code{LT_INIT}, or using @code{AC_DISABLE_SHARED} or @code{AC_DISABLE_STATIC}.
+
+@example
+# Turn off shared libraries during beta-testing, since they
+# make the build process take too long.
+LT_INIT([disable-shared])
+@end example
+
+The user may specify modified forms of the configure flags
+@option{--enable-shared} and @option{--enable-static} to choose whether
+shared or static libraries are built based on the name of the package.
+For example, to have shared @samp{bfd} and @samp{gdb} libraries built,
+but not shared @samp{libg++}, you can run all three @code{configure}
+scripts as follows:
+
+@example
+trick$ ./configure --enable-shared=bfd,gdb
+@end example
+
+In general, specifying @option{--enable-shared=@var{pkgs}} is the same as
+configuring with @option{--enable-shared} every package named in the
+comma-separated @var{pkgs} list, and every other package with
+@option{--disable-shared}.  The @option{--enable-static=@var{pkgs}} flag
+behaves similarly, but it uses @option{--enable-static} and
+@option{--disable-static}.  The same applies to the
+@option{--enable-fast-install=@var{pkgs}} flag, which uses
+@option{--enable-fast-install} and @option{--disable-fast-install}.
+
+The package name @samp{default} matches any packages that have not set
+their name in the @code{PACKAGE} environment variable.
+
+The @option{--with-pic} and @option{--without-pic} configure flags can be used
+to specify whether or not @command{libtool} uses PIC objects.  By default,
+@command{libtool} uses PIC objects for shared libraries and non-PIC objects for
+static libraries.  The @option{--with-pic} option also accepts a comma-separated
+list of package names.  Specifying @option{--with-pic=@var{pkgs}} is the same
+as configuring every package in @var{pkgs} with @option{--with-pic} and every
+other package with the default configuration.  The package name @samp{default}
+is treated the same as for @option{--enable-shared} and
+@option{--enable-static}.
+
+This macro also sets the shell variable @code{LIBTOOL_DEPS}, that you
+can use to automatically update the libtool script if it becomes
+out-of-date.  In order to do that, add to your @file{configure.ac}:
+
+@example
+LT_INIT
+AC_SUBST([LIBTOOL_DEPS])
+@end example
+
+and, to @file{Makefile.in} or @file{Makefile.am}:
+
+@example
+LIBTOOL_DEPS = @@LIBTOOL_DEPS@@
+libtool: $(LIBTOOL_DEPS)
+        $(SHELL) ./config.status libtool
+@end example
+
+If you are using GNU Automake, you can omit the assignment, as Automake
+will take care of it.  You'll obviously have to create some dependency
+on @file{libtool}.
+
+Aside from @code{disable-static} and @code{disable-shared}, there are
+other options that you can pass to @code{LT_INIT} to modify its
+behaviour.  Here is a full list:
+
+@table @samp
+@item dlopen
+Enable checking for dlopen support.  This option should be used if
+the package makes use of the @option{-dlopen} and @option{-dlpreopen}
+libtool flags, otherwise libtool will assume that the system does not
+support dlopening.
+
+@item win32-dll
+This option should be used if the package has been ported to build clean
+dlls on win32 platforms.  Usually this means that any library data items
+are exported with @code{__declspec(dllexport)} and imported with
+@code{__declspec(dllimport)}.  If this macro is not used, libtool will
+assume that the package libraries are not dll clean and will build only
+static libraries on win32 hosts.
+
+Provision must be made to pass @option{-no-undefined} to @code{libtool}
+in link mode from the package @code{Makefile}.  Naturally, if you pass
+@option{-no-undefined}, you must ensure that all the library symbols
+@strong{really are} defined at link time!
+
+@item disable-fast-install
+Change the default behaviour for @code{LT_INIT} to disable
+optimization for fast installation.  The user may still override this
+default, depending on platform support, by specifying
+@option{--enable-fast-install} to @command{configure}.
+
+@item shared
+Change the default behaviour for @code{LT_INIT} to enable
+shared libraries.  This is the default on all systems where
+Libtool knows how to create shared libraries.
+The user may still override this default by specifying
+@option{--disable-shared} to @command{configure}.
+
+@item disable-shared
+Change the default behaviour for @code{LT_INIT} to disable
+shared libraries.  The user may still override this default by
+specifying @option{--enable-shared} to @command{configure}.
+
+@item static
+Change the default behaviour for @code{LT_INIT} to enable
+static libraries.  This is the default on all systems where
+shared libraries have been disabled for some reason, and on
+most systems where shared libraries have been enabled.
+If shared libraries are enabled, the user may still override
+this default by specifying @option{--disable-static} to
+@command{configure}.
+
+@item disable-static
+Change the default behaviour for @code{LT_INIT} to disable
+static libraries.  The user may still override this default by
+specifying @option{--enable-static} to @command{configure}.
+
+@item pic-only
+Change the default behaviour for @command{libtool} to try to use only
+PIC objects.  The user may still override this default by specifying
+@option{--without-pic} to @command{configure}.
+
+@item no-pic
+Change the default behaviour of @command{libtool} to try to use only
+non-PIC objects.  The user may still override this default by
+specifying @option{--with-pic} to @command{configure}.
+
+@end table
+
+@end defmac
+
+@defmac LT_LANG (@var{language})
+Enable @command{libtool} support for the language given if it
+has not yet already been enabled.  Languages accepted are ``C++'',
+``Fortran 77'', ``Java'', ``Go'', and ``Windows Resource''.
+
+If Autoconf language support macros such as @code{AC_PROG_CXX} are
+used in your @file{configure.ac}, Libtool language support will automatically
+be enabled.
+
+Conversely using @code{LT_LANG} to enable language support for Libtool
+will automatically enable Autoconf language support as well.
+
+Both of the following examples are therefore valid ways of adding C++
+language support to Libtool.
+
+@example
+LT_INIT
+LT_LANG([C++])
+@end example
+
+@example
+LT_INIT
+AC_PROG_CXX
+@end example
+
+@end defmac
+
+@defmac AC_LIBTOOL_DLOPEN
+This macro is deprecated, the @samp{dlopen} option to @code{LT_INIT} should be
+used instead.
+@end defmac
+
+@defmac AC_LIBTOOL_WIN32_DLL
+This macro is deprecated, the @samp{win32-dll} option to @code{LT_INIT} should
+be used instead.
+@end defmac
+
+@defmac AC_DISABLE_FAST_INSTALL
+This macro is deprecated, the @samp{disable-fast-install} option to @code{LT_INIT}
+should be used instead.
+@end defmac
+
+@defmac AC_DISABLE_SHARED
+@defmacx AM_DISABLE_SHARED
+Change the default behaviour for @code{LT_INIT} to disable shared libraries.
+The user may still override this default by specifying @samp{--enable-shared}.
+The option @samp{disable-shared} to @code{LT_INIT} is a shorthand for this.
+@code{AM_DISABLE_SHARED} is a deprecated alias for @code{AC_DISABLE_SHARED}.
+@end defmac
+
+@defmac AC_ENABLE_SHARED
+@defmacx AM_ENABLE_SHARED
+Change the default behaviour for @code{LT_INIT} to enable shared libraries.
+This is the default on all systems where Libtool knows how to create
+shared libraries.  The user may still override this default by specifying
+@samp{--disable-shared}.  The option @samp{shared} to @code{LT_INIT} is a
+shorthand for this.
+@code{AM_ENABLE_SHARED} is a deprecated alias for @code{AC_ENABLE_SHARED}.
+@end defmac
+
+@defmac AC_DISABLE_STATIC
+@defmacx AM_DISABLE_STATIC
+Change the default behaviour for @code{LT_INIT} to disable static libraries.
+The user may still override this default by specifying @samp{--enable-static}.
+The option @samp{disable-static} to @code{LT_INIT} is a shorthand for this.
+@code{AM_DISABLE_STATIC} is a deprecated alias for @code{AC_DISABLE_STATIC}.
+@end defmac
+
+@defmac AC_ENABLE_STATIC
+@defmacx AM_ENABLE_STATIC
+Change the default behaviour for @code{LT_INIT} to enable static libraries.
+This is the default on all systems where shared libraries have been disabled
+for some reason, and on most systems where shared libraries have been enabled.
+If shared libraries are enabled, the user may still override this default by
+specifying @samp{--disable-static}.  The option @samp{static} to @code{LT_INIT}
+is a shorthand for this.
+@code{AM_ENABLE_STATIC} is a deprecated alias for @code{AC_ENABLE_STATIC}.
+@end defmac
+
+The tests in @code{LT_INIT} also recognize the following
+environment variables:
+
+@defvar CC
+The C compiler that will be used by the generated @code{libtool}.  If
+this is not set, @code{LT_INIT} will look for @command{gcc} or
+@command{cc}.
+@end defvar
+
+@defvar CFLAGS
+Compiler flags used to generate standard object files.  If this is not
+set, @code{LT_INIT} will not use any such flags.  It affects
+only the way @code{LT_INIT} runs tests, not the produced
+@code{libtool}.
+@end defvar
+
+@defvar CPPFLAGS
+C preprocessor flags.  If this is not set, @code{LT_INIT} will
+not use any such flags.  It affects only the way @code{LT_INIT}
+runs tests, not the produced @code{libtool}.
+@end defvar
+
+@defvar LD
+The system linker to use (if the generated @code{libtool} requires one).
+If this is not set, @code{LT_INIT} will try to find out what is
+the linker used by @code{CC}.
+@end defvar
+
+@defvar LDFLAGS
+The flags to be used by @code{libtool} when it links a program.  If
+this is not set, @code{LT_INIT} will not use any such flags.  It
+affects only the way @code{LT_INIT} runs tests, not the produced
+@code{libtool}.
+@end defvar
+
+@defvar LIBS
+The libraries to be used by @code{LT_INIT} when it links a
+program.  If this is not set, @code{LT_INIT} will not use any
+such flags.  It affects only the way @code{LT_INIT} runs tests,
+not the produced @code{libtool}.
+@end defvar
+
+@defvar NM
+Program to use rather than checking for @command{nm}.
+@end defvar
+
+@defvar RANLIB
+Program to use rather than checking for @command{ranlib}.
+@end defvar
+
+@defvar LN_S
+A command that creates a link of a program, a soft-link if possible, a
+hard-link otherwise.  @code{LT_INIT} will check for a suitable
+program if this variable is not set.
+@end defvar
+
+@defvar DLLTOOL
+Program to use rather than checking for @command{dlltool}.  Only meaningful
+for Cygwin/MS-Windows.
+@end defvar
+
+@defvar OBJDUMP
+Program to use rather than checking for @command{objdump}.  Only meaningful
+for Cygwin/MS-Windows.
+@end defvar
+
+@defvar AS
+Program to use rather than checking for @command{as}.  Only used on
+Cygwin/MS-Windows at the moment.
+@end defvar
+
+@defvar MANIFEST_TOOL
+Program to use rather than checking for @command{mt}, the Manifest Tool.
+Only used on Cygwin/MS-Windows at the moment.
+@end defvar
+
+With 1.3 era libtool, if you wanted to know any details of what
+libtool had discovered about your architecture and environment, you
+had to run the script with @option{--config} and grep through the
+results.  This idiom was supported up to and including 1.5.x era
+libtool, where it was possible to call the generated libtool script
+from @file{configure.ac} as soon as @code{LT_INIT} had
+completed.  However, one of the features of libtool 1.4 was that the
+libtool configuration was migrated out of a separate @file{ltconfig}
+file, and added to the @code{LT_INIT} macro (nee @code{AC_PROG_LIBTOOL}),
+so the results of the configuration tests were available directly to code in
+@file{configure.ac}, rendering the call out to the generated libtool
+script obsolete.
+
+Starting with libtool 2.0, the multipass generation of the libtool
+script has been consolidated into a single @file{config.status} pass,
+which happens after all the code in @file{configure.ac} has
+completed.  The implication of this is that the libtool script does
+not exist during execution of code from @file{configure.ac}, and so
+obviously it cannot be called for @option{--config} details anymore.  If
+you are upgrading projects that used this idiom to libtool 2.0 or
+newer, you should replace those calls with direct references to the
+equivalent Autoconf shell variables that are set by the configure time
+tests before being passed to @file{config.status} for inclusion in the
+generated libtool script.
+
+@defmac LT_OUTPUT
+By default, the configured @file{libtool} script is generated by the
+call to @code{AC_OUTPUT} command, and there is rarely any need to use
+@file{libtool} from @file{configure}.  However, sometimes it is
+necessary to run configure time compile and link tests using
+@file{libtool}.  You can add @code{LT_OUTPUT} to your
+@file{configure.ac} any time after @code{LT_INIT} and any
+@code{LT_LANG} calls; that done, @file{libtool} will be created by a
+specially generated @file{config.lt} file, and available for use in
+later tests.
+
+Also, when @code{LT_OUTPUT} is used, for backwards compatibility with
+Automake regeneration rules, @file{config.status} will call
+@file{config.lt} to regenerate @file{libtool}, rather than generating
+the file itself.
+@end defmac
+
+@pindex aclocal
+When you invoke the @command{libtoolize} program (@pxref{Invoking
+libtoolize}), it will tell you where to find a definition of
+@code{LT_INIT}.  If you use Automake, the @command{aclocal} program
+will automatically add @code{LT_INIT} support to your
+@file{configure} script when it sees the invocation of @code{LT_INIT}
+in @file{configure.ac}.
+
+Because of these changes, and the runtime version compatibility checks
+Libtool now executes, we now advise @strong{against} including a copy of
+@file{libtool.m4} (and brethren) in @file{acinclude.m4}.  Instead,
+you should set your project macro directory with
+@code{AC_CONFIG_MACRO_DIR}.  When you @command{libtoolize} your
+project, a copy of the relevant macro definitions will be placed in
+your @code{AC_CONFIG_MACRO_DIR}, where @command{aclocal} can reference
+them directly from @file{aclocal.m4}.
+
+
+@node Configure notes
+@subsection Platform-specific configuration notes
+
+While Libtool tries to hide as many platform-specific features as possible,
+some have to be taken into account when configuring either the Libtool package
+or a libtoolized package.
+
+@include notes.texi
+
+
+@node Distributing
+@section Including libtool in your package
+
+In order to use libtool, you need to include the following files with
+your package:
+
+@table @file
+@item config.guess
+@pindex config.guess
+Attempt to guess a canonical system name.
+
+@item config.sub
+@pindex config.sub
+Canonical system name validation subroutine script.
+
+@item install-sh
+@pindex install-sh
+BSD-compatible @command{install} replacement script.
+
+@item ltmain.sh
+@pindex ltmain.sh
+A generic script implementing basic libtool functionality.
+@end table
+
+Note that the libtool script itself should @emph{not} be included with
+your package.  @xref{Configuring}.
+
+You should use the @command{libtoolize} program, rather than manually
+copying these files into your package.
+
+@menu
+* Invoking libtoolize::         @code{libtoolize} command line options.
+* Autoconf and LTLIBOBJS::      Autoconf automates LTLIBOBJS generation.
+@end menu
+
+@node Invoking libtoolize
+@subsection Invoking @command{libtoolize}
+@pindex libtoolize
+@cindex libtoolize command options
+@cindex command options, libtoolize
+@cindex options, libtoolize command
+
+The @command{libtoolize} program provides a standard way to add libtool
+support to your package.  In the future, it may implement better usage
+checking, or other features to make libtool even easier to use.
+
+The @command{libtoolize} program has the following synopsis:
+
+@example
+libtoolize [@var{option}]@dots{}
+@end example
+
+@noindent
+and accepts the following options:
+
+@table @option
+
+@item --copy
+@itemx -c
+Copy files from the libtool data directory rather than creating
+symlinks.
+
+@item --debug
+Dump a trace of shell script execution to standard output.  This
+produces a lot of output, so you may wish to pipe it to @command{less} (or
+@command{more}) or redirect to a file.
+
+@item --dry-run
+@itemx -n
+Don't run any commands that modify the file system, just print them
+out.
+
+@item --force
+@itemx -f
+Replace existing libtool files.  By default, @command{libtoolize} won't
+overwrite existing files.
+
+@item --help
+Display a help message and exit.
+
+@item --ltdl [@var{target-directory-name}]
+Install libltdl in the @var{target-directory-name} subdirectory of
+your package.  Normally, the directory is extracted from the argument
+to @code{LT_CONFIG_LTDL_DIR} in @file{configure.ac}, though you can
+also specify a subdirectory name here if you are not using Autoconf
+for example.  If @command{libtoolize} can't determine the target
+directory, @samp{libltdl} is used as the default.
+
+@item --no-warn
+Normally, Libtoolize tries to diagnose use of deprecated libtool macros
+and other stylistic issues.  If you are deliberately using outdated
+calling conventions, this option prevents Libtoolize from explaining
+how to update your project's Libtool conventions.
+
+@item --nonrecursive
+If passed in conjunction with @option{--ltdl}, this option will cause
+the @command{libltdl} installed by @samp{libtoolize} to be set up for
+use with a non-recursive @command{automake} build.  To make use of it,
+you will need to add the following to the @file{Makefile.am} of the
+parent project:
+
+@example
+## libltdl/Makefile.inc @r{appends to the following variables}
+## @r{so we set them here before including it:}
+BUILT_SOURCES   =
+
+AM_CPPFLAGS        =
+AM_LDFLAGS         =
+
+include_HEADERS    =
+noinst_LTLIBRARIES =
+lib_LTLIBRARIES   =
+EXTRA_LTLIBRARIES  =
+
+EXTRA_DIST   =
+
+CLEANFILES   =
+MOSTLYCLEANFILES   =
+
+include libltdl/Makefile.inc
+@end example
+
+@noindent
+
+@item --quiet
+@itemx -q
+Work silently.  @samp{libtoolize --quiet} is used by GNU Automake
+to add libtool files to your package if necessary.
+
+@item --recursive
+If passed in conjunction with @option{--ltdl}, this option will cause
+the @command{libtoolize} installed @samp{libltdl} to be set up for use
+with a recursive @command{automake} build.  To make use of it, you
+will need to adjust the parent project's @file{configure.ac}:
+
+@example
+AC_CONFIG_FILES([libltdl/Makefile])
+@end example
+
+@noindent
+and @file{Makefile.am}:
+
+@example
+SUBDIRS += libltdl
+@end example
+
+@item --subproject
+If passed in conjunction with @option{--ltdl}, this option will cause
+the @command{libtoolize} installed @samp{libltdl} to be set up for
+independent configuration and compilation as a self-contained
+subproject.  To make use of it, you should arrange for your build to
+call @command{libltdl/configure}, and then run @command{make} in the
+@file{libltdl} directory (or the subdirectory you put libltdl into).
+If your project uses Autoconf, you can use the supplied
+@samp{LT_WITH_LTDL} macro, or else call @samp{AC_CONFIG_SUBDIRS}
+directly.
+
+Previous releases of @samp{libltdl} built exclusively in this mode,
+but now it is the default mode both for backwards compatibility and
+because, for example, it is suitable for use in projects that wish to
+use @samp{libltdl}, but not use the Autotools for their own build
+process.
+
+@item --verbose
+@itemx -v
+Work noisily!  Give a blow by blow account of what
+@command{libtoolize} is doing.
+
+@item --version
+Print @command{libtoolize} version information and exit.
+@end table
+
+@cindex LIBTOOLIZE_OPTIONS
+Sometimes it can be useful to pass options to @command{libtoolize} even
+though it is called by another program, such as @command{autoreconf}.  A
+limited number of options are parsed from the environment variable
+@code{LIBTOOLIZE_OPTIONS}: currently @option{--debug}, @option{--no-warn},
+@option{--quiet} and @option{--verbose}.  Multiple options passed in
+@code{LIBTOOLIZE_OPTIONS} must be separated with a space, comma or a
+colon.
+
+By default, a warning is issued for unknown options found in
+@code{LIBTOOLIZE_OPTIONS} unless the first such option is
+@option{--no-warn}.  Where @command{libtoolize} has always quit
+on receipt of an unknown option at the command line, this and all
+previous releases of @command{libtoolize} will continue unabated whatever
+the content of @code{LIBTOOLIZE_OPTIONS} (modulo some possible warning
+messages).
+
+@example
+trick$ @kbd{LIBTOOLIZE_OPTIONS=--no-warn,--quiet autoreconf --install}
+@end example
+
+@findex AC_CONFIG_MACRO_DIR
+If @command{libtoolize} detects an explicit call to
+@code{AC_CONFIG_MACRO_DIR} (@pxref{Input, , The Autoconf Manual,
+autoconf, The Autoconf Manual}) in your @file{configure.ac}, it will
+put the Libtool macros in the specified directory.
+
+In the future other Autotools will automatically check the contents of
+@code{AC_CONFIG_MACRO_DIR}, but at the moment it is more portable to
+add the macro directory to @code{ACLOCAL_AMFLAGS} in
+@file{Makefile.am}, which is where the tools currently look.  If
+@command{libtoolize} doesn't see @code{AC_CONFIG_MACRO_DIR}, it too
+will honour the first @samp{-I} argument in @code{ACLOCAL_AMFLAGS}
+when choosing a directory to store libtool configuration macros in.
+It is perfectly sensible to use both @code{AC_CONFIG_MACRO_DIR} and
+@code{ACLOCAL_AMFLAGS}, as long as they are kept in synchronisation.
+
+@example
+ACLOCAL_AMFLAGS = -I m4
+@end example
+
+When you bootstrap your project with @command{aclocal}, then you will
+need to explicitly pass the same macro directory with
+@command{aclocal}'s @samp{-I} flag:
+
+@example
+trick$ @kbd{aclocal -I m4}
+@end example
+
+@findex AC_CONFIG_AUX_DIR
+If @command{libtoolize} detects an explicit call to
+@code{AC_CONFIG_AUX_DIR} (@pxref{Input, , The Autoconf Manual,
+autoconf, The Autoconf Manual}) in your @file{configure.ac}, it
+will put the other support files in the specified directory.
+Otherwise they too end up in the project root directory.
+
+Unless @option{--no-warn} is passed, @command{libtoolize} displays
+hints for adding libtool support to your package, as well.
+
+@node Autoconf and LTLIBOBJS
+@subsection Autoconf and @code{LTLIBOBJS}
+
+People used to add code like the following to their
+@file{configure.ac}:
+
+@cindex LTLIBOBJS
+@example
+LTLIBOBJS=`echo "$LIBOBJS" | sed 's/\.[^.]* /.lo /g;s/\.[^.]*$/.lo/'`
+AC_SUBST([LTLIBOBJS])
+@end example
+
+@noindent
+This is no longer required (since Autoconf 2.54), and doesn't take
+Automake's deansification support into account either, so doesn't work
+correctly even with ancient Autoconfs!
+
+Provided you are using a recent (2.54 or better) incarnation of
+Autoconf, the call to @code{AC_OUTPUT} takes care of setting
+@code{LTLIBOBJS} up correctly, so you can simply delete such snippets
+from your @file{configure.ac} if you had them.
+
+
+@node Static-only libraries
+@section Static-only libraries
+@cindex debugging libraries
+@cindex developing libraries
+@cindex double-compilation, avoiding
+@cindex avoiding shared libraries
+@cindex eliding shared libraries
+@cindex using shared libraries, not
+@cindex shared libraries, not using
+@cindex time, saving
+@cindex saving time
+
+When you are developing a package, it is often worthwhile to configure
+your package with the @option{--disable-shared} flag, or to override the
+defaults for @code{LT_INIT} by using the @code{disable-shared} option
+(@pxref{LT_INIT, , The @code{LT_INIT} macro}).  This prevents libtool
+from building shared libraries, which has several advantages:
+
+@itemize @bullet
+@item
+compilation is twice as fast, which can speed up your development cycle,
+
+@item
+debugging is easier because you don't need to deal with any complexities
+added by shared libraries, and
+
+@item
+you can see how libtool behaves on static-only platforms.
+@end itemize
+
+You may want to put a small note in your package @file{README} to let
+other developers know that @option{--disable-shared} can save them time.
+The following example note is taken from the GIMP@footnote{GNU Image
+Manipulation Program, for those who haven't taken the plunge.  See
+@url{http://www.gimp.org/}.} distribution @file{README}:
+
+@example
+The GIMP uses GNU Libtool in order to build shared libraries on a
+variety of systems.  While this is very nice for making usable
+binaries, it can be a pain when trying to debug a program.  For that
+reason, compilation of shared libraries can be turned off by
+specifying the @option{--disable-shared} option to @file{configure}.
+@end example
+
+
+@node Other languages
+@chapter Using libtool with other languages
+@cindex C, not using
+@cindex languages, non-C
+@cindex C++, using
+
+Libtool was first implemented in order to add support for writing shared
+libraries in the C language.  However, over time, libtool is being
+integrated with other languages, so that programmers are free to reap
+the benefits of shared libraries in their favorite programming language.
+
+This chapter describes how libtool interacts with other languages,
+and what special considerations you need to make if you do not use C.
+
+@menu
+* C++ libraries::               Writing libraries for C++
+* Tags::                        Tags
+@end menu
+
+@node C++ libraries
+@section Writing libraries for C++
+@c FIXME: in the TOC, the ++ is too large (seems to be math mode)
+@cindex trouble with C++
+@cindex pitfalls using C++
+@cindex C++, pitfalls
+
+Creating libraries of C++ code should be a fairly straightforward
+process, because its object files differ from C ones in only three ways:
+
+@enumerate 1
+@item
+Because of name mangling, C++ libraries are only usable by the C++
+compiler that created them.  This decision was made by the designers of
+C++ in order to protect users from conflicting implementations of
+features such as constructors, exception handling, and RTTI.
+
+@item
+On some systems, the C++ compiler must take special actions for the
+dynamic linker to run dynamic (i.e., run-time) initializers.  This means
+that we should not call @command{ld} directly to link such libraries, and
+we should use the C++ compiler instead.
+
+@item
+C++ compilers will link some Standard C++ library in by default, but
+libtool does not know which are these libraries, so it cannot even run
+the inter-library dependence analyzer to check how to link it in.
+Therefore, running @command{ld} to link a C++ program or library is deemed
+to fail.
+@end enumerate
+
+Because of these three issues, Libtool has been designed to always use
+the C++ compiler to compile and link C++ programs and libraries.  In
+some instances the @code{main()} function of a program must also be
+compiled with the C++ compiler for static C++ objects to be properly
+initialized.
+
+@node Tags
+@section Tags
+@cindex tag names
+@cindex language names
+@cindex inferring tags
+
+Libtool supports multiple languages through the use of tags.  Technically
+a tag corresponds to a set of configuration variables associated with a
+language.  These variables tell @command{libtool} how it should create
+objects and libraries for each language.
+
+Tags are defined at @command{configure}-time for each language activated
+in the package (see @code{LT_LANG} in @ref{LT_INIT}).  Here is the
+correspondence between language names and tags names.
+
+@multitable {Windows Resource} {Tag name}
+@item Language name    @tab Tag name
+@item C                @tab CC
+@item C++              @tab CXX
+@item Java             @tab GCJ
+@item Fortran 77       @tab F77
+@item Fortran          @tab FC
+@item Go               @tab GO
+@item Windows Resource @tab RC
+@end multitable
+
+@command{libtool} tries to automatically infer which tag to use from
+the compiler command being used to compile or link.  If it can't infer
+a tag, then it defaults to the configuration for the @code{C} language.
+
+The tag can also be specified using @command{libtool}'s
+@option{--tag=@var{tag}} option (@pxref{Invoking libtool}).  It is a good
+idea to do so in @file{Makefile} rules, because that will allow users to
+substitute the compiler without relying on @command{libtool} inference
+heuristics.  When no tag is specified, @command{libtool} will default
+to @code{CC}; this tag always exists.
+
+Finally, the set of tags available in a particular project can be
+retrieved by tracing for the @code{LT_SUPPORTED_TAG} macro (@pxref{Trace
+interface}).
+
+@node Versioning
+@chapter Library interface versions
+@cindex dynamic dependencies
+@cindex dependency versioning
+@cindex shared library versions
+
+The most difficult issue introduced by shared libraries is that of
+creating and resolving runtime dependencies.  Dependencies on programs
+and libraries are often described in terms of a single name, such as
+@command{sed}.  So, one may say ``libtool depends on sed,'' and that is
+good enough for most purposes.
+
+However, when an interface changes regularly, we need to be more
+specific: ``Gnus 5.1 requires Emacs 19.28 or above.''  Here, the
+description of an interface consists of a name, and a ``version
+number.''
+
+Even that sort of description is not accurate enough for some purposes.
+What if Emacs 20 changes enough to break Gnus 5.1?
+
+The same problem exists in shared libraries: we require a formal version
+system to describe the sorts of dependencies that programs have on
+shared libraries, so that the dynamic linker can guarantee that programs
+are linked only against libraries that provide the interface they
+require.
+
+@menu
+* Interfaces::                  What are library interfaces?
+* Libtool versioning::          Libtool's versioning system.
+* Updating version info::       Changing version information before releases.
+* Release numbers::             Breaking binary compatibility for aesthetics.
+@end menu
+
+@node Interfaces
+@section What are library interfaces?
+@cindex library interfaces
+
+Interfaces for libraries may be any of the following (and more):
+
+@itemize @bullet
+@item
+global variables: both names and types
+
+@item
+global functions: argument types and number, return types, and function names
+
+@item
+standard input, standard output, standard error, and file formats
+
+@item
+sockets, pipes, and other inter-process communication protocol formats
+@end itemize
+
+Note that static functions do not count as interfaces, because they are
+not directly available to the user of the library.
+
+@node Libtool versioning
+@section Libtool's versioning system
+@cindex libtool library versions
+@cindex formal versioning
+@cindex versioning, formal
+
+Libtool has its own formal versioning system.  It is not as flexible as
+some, but it is definitely the simplest of the more powerful versioning
+systems.
+
+Think of a library as exporting several sets of interfaces, arbitrarily
+represented by integers.  When a program is linked against a library, it
+may use any subset of those interfaces.
+
+Libtool's description of the interfaces that a program uses is simple:
+it encodes the least and the greatest interface numbers in the resulting
+binary (@var{first-interface}, @var{last-interface}).
+
+The dynamic linker is guaranteed that if a library supports @emph{every}
+interface number between @var{first-interface} and @var{last-interface},
+then the program can be relinked against that library.
+
+Note that this can cause problems because libtool's compatibility
+requirements are actually stricter than is necessary.
+
+Say @file{libhello} supports interfaces 5, 16, 17, 18, and 19, and that
+libtool is used to link @file{test} against @file{libhello}.
+
+Libtool encodes the numbers 5 and 19 in @file{test}, and the dynamic
+linker will only link @file{test} against libraries that support
+@emph{every} interface between 5 and 19.  So, the dynamic linker refuses
+to link @file{test} against @file{libhello}!
+
+In order to eliminate this problem, libtool only allows libraries to
+declare consecutive interface numbers.  So, @file{libhello} can declare at
+most that it supports interfaces 16 through 19.  Then, the dynamic
+linker will link @file{test} against @file{libhello}.
+
+So, libtool library versions are described by three integers:
+
+@table @var
+@item current
+The most recent interface number that this library implements.
+
+@item revision
+The implementation number of the @var{current} interface.
+
+@item age
+The difference between the newest and oldest interfaces that this
+library implements.  In other words, the library implements all the
+interface numbers in the range from number @code{@var{current} -
+@var{age}} to @code{@var{current}}.
+@end table
+
+If two libraries have identical @var{current} and @var{age} numbers,
+then the dynamic linker chooses the library with the greater
+@var{revision} number.
+
+@node Updating version info
+@section Updating library version information
+
+If you want to use libtool's versioning system, then you must specify
+the version information to libtool using the @option{-version-info} flag
+during link mode (@pxref{Link mode}).
+
+This flag accepts an argument of the form
+@samp{@var{current}[:@var{revision}[:@var{age}]]}.  So, passing
+@option{-version-info 3:12:1} sets @var{current} to 3, @var{revision} to
+12, and @var{age} to 1.
+
+If either @var{revision} or @var{age} are omitted, they default to 0.
+Also note that @var{age} must be less than or equal to the @var{current}
+interface number.
+
+Here are a set of rules to help you update your library version
+information:
+
+@enumerate 1
+@item
+Start with version information of @samp{0:0:0} for each libtool library.
+
+@item
+Update the version information only immediately before a public release
+of your software.  More frequent updates are unnecessary, and only
+guarantee that the current interface number gets larger faster.
+
+@item
+If the library source code has changed at all since the last update,
+then increment @var{revision} (@samp{@var{c}:@var{r}:@var{a}} becomes
+@samp{@var{c}:@math{r+1}:@var{a}}).
+
+@item
+If any interfaces have been added, removed, or changed since the last
+update, increment @var{current}, and set @var{revision} to 0.
+
+@item
+If any interfaces have been added since the last public release, then
+increment @var{age}.
+
+@item
+If any interfaces have been removed or changed since the last public
+release, then set @var{age} to 0.
+@end enumerate
+
+@strong{@emph{Never}} try to set the interface numbers so that they
+correspond to the release number of your package.  This is an abuse that
+only fosters misunderstanding of the purpose of library versions.
+Instead, use the @option{-release} flag (@pxref{Release numbers}), but be
+warned that every release of your package will not be binary compatible
+with any other release.
+
+The following explanation may help to understand the above rules a bit
+better: consider that there are three possible kinds of reactions from
+users of your library to changes in a shared library:
+
+@enumerate 1
+@item
+Programs using the previous version may use the new version as
+drop-in replacement, and programs using the new version can also work
+with the previous one.  In other words, no recompiling nor relinking
+is needed.  In this case, bump @var{revision} only, don't touch
+@var{current} nor @var{age}.
+
+@item
+Programs using the previous version may use the new version as
+drop-in replacement, but programs using the new version may use APIs not
+present in the previous one.  In other words, a program linking against
+the new version may fail with ``unresolved symbols'' if linking against
+the old version at runtime: set @var{revision} to 0, bump @var{current}
+and @var{age}.
+
+@item
+Programs may need to be changed, recompiled, relinked in order to use
+the new version.  Bump @var{current}, set @var{revision} and @var{age}
+to 0.
+@end enumerate
+
+@noindent
+In the above description, @emph{programs} using the library in question
+may also be replaced by other libraries using it.
+
+
+@node Release numbers
+@section Managing release information
+
+Often, people want to encode the name of the package release into the
+shared library so that it is obvious to the user which package their
+programs are linked against.  This convention is used especially on
+GNU/Linux:
+
+@example
+trick$ @kbd{ls /usr/lib/libbfd*}
+/usr/lib/libbfd.a           /usr/lib/libbfd.so.2.7.0.2
+/usr/lib/libbfd.so
+trick$
+@end example
+
+On @samp{trick}, @file{/usr/lib/libbfd.so} is a symbolic link to
+@file{libbfd.so.2.7.0.2}, which was distributed as a part of
+@samp{binutils-2.7.0.2}.
+
+Unfortunately, this convention conflicts directly with libtool's idea of
+library interface versions, because the library interface rarely changes
+at the same time that the release number does, and the library suffix is
+never the same across all platforms.
+
+So, in order to accommodate both views, you can use the @option{-release}
+flag in order to set release information for libraries for which you do not
+want to use @option{-version-info}.  For the @file{libbfd} example, the
+next release that uses libtool should be built with @samp{-release
+2.9.0}, which will produce the following files on GNU/Linux:
+
+@example
+trick$ @kbd{ls /usr/lib/libbfd*}
+/usr/lib/libbfd-2.9.0.so     /usr/lib/libbfd.a
+/usr/lib/libbfd.so
+trick$
+@end example
+
+In this case, @file{/usr/lib/libbfd.so} is a symbolic link to
+@file{libbfd-2.9.0.so}.  This makes it obvious that the user is dealing
+with @samp{binutils-2.9.0}, without compromising libtool's idea of
+interface versions.
+
+Note that this option causes a modification of the library name, so do
+not use it unless you want to break binary compatibility with any past
+library releases.  In general, you should only use @option{-release} for
+package-internal libraries or for ones whose interfaces change very
+frequently.
+
+@node Library tips
+@chapter Tips for interface design
+@cindex library interfaces, design
+@cindex design of library interfaces
+
+Writing a good library interface takes a lot of practice and thorough
+understanding of the problem that the library is intended to solve.
+
+If you design a good interface, it won't have to change often, you won't
+have to keep updating documentation, and users won't have to keep
+relearning how to use the library.
+
+Here is a brief list of tips for library interface design that may
+help you in your exploits:
+
+@table @asis
+@item Plan ahead
+Try to make every interface truly minimal, so that you won't need to
+delete entry points very often.
+
+@item Avoid interface changes
+@cindex renaming interface functions
+Some people love redesigning and changing entry points just for the heck
+of it (note: @emph{renaming} a function is considered changing an entry
+point).  Don't be one of those people.  If you must redesign an
+interface, then try to leave compatibility functions behind so that
+users don't need to rewrite their existing code.
+
+@item Use opaque data types
+@cindex opaque data types
+The fewer data type definitions a library user has access to, the
+better.  If possible, design your functions to accept a generic pointer
+(that you can cast to an internal data type), and provide access
+functions rather than allowing the library user to directly manipulate
+the data.
+That way, you have the freedom to change the data structures without
+changing the interface.
+
+This is essentially the same thing as using abstract data types and
+inheritance in an object-oriented system.
+
+@item Use header files
+@cindex header files
+If you are careful to document each of your library's global functions
+and variables in header files, and include them in your library source
+files, then the compiler will let you know if you make any interface
+changes by accident (@pxref{C header files}).
+
+@item Use the @code{static} keyword (or equivalent) whenever possible
+@cindex global functions
+The fewer global functions your library has, the more flexibility you'll
+have in changing them.  Static functions and variables may change forms
+as often as you like@dots{} your users cannot access them, so they
+aren't interface changes.
+
+@item Be careful with array dimensions
+The number of elements in a global array is part of an interface, even
+if the header just declares @code{extern int foo[];}.  This is because
+on i386 and some other SVR4/ELF systems, when an application
+references data in a shared library the size of that data (whatever
+its type) is included in the application executable.  If you might
+want to change the size of an array or string then provide a pointer
+not the actual array.
+@end table
+
+@menu
+* C header files::              How to write portable include files.
+@end menu
+
+@node C header files
+@section Writing C header files
+@cindex portable C headers
+@cindex C header files, portable
+@cindex include files, portable
+
+Writing portable C header files can be difficult, since they may be read
+by different types of compilers:
+
+@table @asis
+@item C++ compilers
+C++ compilers require that functions be declared with full prototypes,
+since C++ is more strongly typed than C@.  C functions and variables also
+need to be declared with the @code{extern "C"} directive, so that the
+names aren't mangled.  @xref{C++ libraries}, for other issues relevant
+to using C++ with libtool.
+
+@item ANSI C compilers
+ANSI C compilers are not as strict as C++ compilers, but functions
+should be prototyped to avoid unnecessary warnings when the header file
+is @code{#include}d.
+
+@item non-ANSI C compilers
+Non-ANSI compilers will report errors if functions are prototyped.
+@end table
+
+These complications mean that your library interface headers must use
+some C preprocessor magic in order to be usable by each of the above
+compilers.
+
+@file{foo.h} in the @file{tests/demo} subdirectory of the libtool
+distribution serves as an example for how to write a header file that
+can be safely installed in a system directory.
+
+Here are the relevant portions of that file:
+
+@example
+/* BEGIN_C_DECLS should be used at the beginning of your declarations,
+   so that C++ compilers don't mangle their names.  Use END_C_DECLS at
+   the end of C declarations. */
+#undef BEGIN_C_DECLS
+#undef END_C_DECLS
+#ifdef __cplusplus
+# define BEGIN_C_DECLS extern "C" @{
+# define END_C_DECLS @}
+#else
+# define BEGIN_C_DECLS /* empty */
+# define END_C_DECLS /* empty */
+#endif
+
+/* PARAMS is a macro used to wrap function prototypes, so that
+   compilers that don't understand ANSI C prototypes still work,
+   and ANSI C compilers can issue warnings about type mismatches. */
+#undef PARAMS
+#if defined (__STDC__) || defined (_AIX) \
+        || (defined (__mips) && defined (_SYSTYPE_SVR4)) \
+        || defined(WIN32) || defined(__cplusplus)
+# define PARAMS(protos) protos
+#else
+# define PARAMS(protos) ()
+#endif
+@end example
+
+These macros are used in @file{foo.h} as follows:
+
+@example
+#ifndef FOO_H
+#define FOO_H 1
+
+/* The above macro definitions. */
+#include "@dots{}"
+
+BEGIN_C_DECLS
+
+int foo PARAMS((void));
+int hello PARAMS((void));
+
+END_C_DECLS
+
+#endif /* !FOO_H */
+@end example
+
+Note that the @file{#ifndef FOO_H} prevents the body of @file{foo.h}
+from being read more than once in a given compilation.
+
+Also the only thing that must go outside the
+@code{BEGIN_C_DECLS}/@code{END_C_DECLS} pair are @code{#include} lines.
+Strictly speaking it is only C symbol names that need to be protected,
+but your header files will be more maintainable if you have a single
+pair of these macros around the majority of the header contents.
+
+You should use these definitions of @code{PARAMS}, @code{BEGIN_C_DECLS},
+and @code{END_C_DECLS} into your own headers.  Then, you may use them to
+create header files that are valid for C++, ANSI, and non-ANSI
+compilers@footnote{We used to recommend @code{__P},
+@code{__BEGIN_DECLS} and @code{__END_DECLS}.  This was bad advice since
+symbols (even preprocessor macro names) that begin with an underscore
+are reserved for the use of the compiler.}.
+
+Do not be naive about writing portable code.  Following the tips given
+above will help you miss the most obvious problems, but there are
+definitely other subtle portability issues.  You may need to cope with
+some of the following issues:
+
+@itemize @bullet
+@item
+Pre-ANSI compilers do not always support the @code{void *} generic
+pointer type, and so need to use @code{char *} in its place.
+
+@item
+The @code{const}, @code{inline} and @code{signed} keywords are not
+supported by some compilers, especially pre-ANSI compilers.
+
+@item
+The @code{long double} type is not supported by many compilers.
+@end itemize
+
+
+@node Inter-library dependencies
+@chapter Inter-library dependencies
+@cindex dependencies between libraries
+@cindex inter-library dependencies
+
+By definition, every shared library system provides a way for
+executables to depend on libraries, so that symbol resolution is
+deferred until runtime.
+
+An @dfn{inter-library dependency} is one in which a library depends on
+other libraries.  For example, if the libtool library @file{libhello}
+uses the @code{cos} function, then it has an inter-library dependency
+on @file{libm}, the math library that implements @code{cos}.
+
+Some shared library systems provide this feature in an
+internally-consistent way: these systems allow chains of dependencies of
+potentially infinite length.
+
+However, most shared library systems are restricted in that they only
+allow a single level of dependencies.  In these systems, programs may
+depend on shared libraries, but shared libraries may not depend on other
+shared libraries.
+
+In any event, libtool provides a simple mechanism for you to declare
+inter-library dependencies: for every library @file{lib@var{name}} that
+your own library depends on, simply add a corresponding
+@code{-l@var{name}} option to the link line when you create your
+library.  To make an example of our @file{libhello} that depends on
+@file{libm}:
+
+@example
+burger$ @kbd{libtool --mode=link gcc -g -O -o libhello.la foo.lo hello.lo \
+                -rpath /usr/local/lib -lm}
+burger$
+@end example
+
+When you link a program against @file{libhello}, you don't need to
+specify the same @samp{-l} options again: libtool will do that for you,
+in order to guarantee that all the required libraries are found.  This
+restriction is only necessary to preserve compatibility with static
+library systems and simple dynamic library systems.
+
+Some platforms, such as Windows, do not even allow you this
+flexibility.  In order to build a shared library, it must be entirely
+self-contained or it must have dependencies known at link time (that is,
+have references only to symbols that are found in the @file{.lo} files
+or the specified @samp{-l} libraries), and you need to specify the
+@option{-no-undefined} flag.  By default, libtool builds only static
+libraries on these kinds of platforms.
+
+The simple-minded inter-library dependency tracking code of libtool
+releases prior to 1.2 was disabled because it was not clear when it was
+possible to link one library with another, and complex failures would
+occur.  A more complex implementation of this concept was re-introduced
+before release 1.3, but it has not been ported to all platforms that
+libtool supports.  The default, conservative behavior is to avoid
+linking one library with another, introducing their inter-dependencies
+only when a program is linked with them.
+
+@node Dlopened modules
+@chapter Dlopened modules
+@findex dlopen
+@findex dlsym
+@findex dlclose
+@findex shl_load
+@cindex dynamic linking, applications
+@cindex dlopening modules
+@cindex modules, dynamic
+@cindex application-level dynamic linking
+
+It can sometimes be confusing to discuss @dfn{dynamic linking}, because
+the term is used to refer to two different concepts:
+
+@enumerate 1
+@item
+Compiling and linking a program against a shared library, which is
+resolved automatically at run time by the dynamic linker.  In this
+process, dynamic linking is transparent to the application.
+
+@item
+The application calling functions such as @code{dlopen} that load
+arbitrary, user-specified modules at runtime.  This type of dynamic
+linking is explicitly controlled by the application.
+@end enumerate
+
+To mitigate confusion, this manual refers to the second type of dynamic
+linking as @dfn{dlopening} a module.
+
+The main benefit to dlopening object modules is the ability to access
+compiled object code to extend your program, rather than using an
+interpreted language.  In fact, dlopen calls are frequently used in
+language interpreters to provide an efficient way to extend the
+language.
+
+Libtool provides support for dlopened modules.  However, you should
+indicate that your package is willing to use such support, by using the
+@code{LT_INIT} option @samp{dlopen} in @file{configure.ac}.  If this
+option is not given, libtool will assume no dlopening mechanism is
+available, and will try to simulate it.
+
+This chapter discusses how you as a dlopen application developer might
+use libtool to generate dlopen-accessible modules.
+
+@menu
+* Building modules::            Creating dlopenable objects and libraries.
+* Dlpreopening::                Dlopening that works on static platforms.
+* Linking with dlopened modules::  Using dlopenable modules in libraries.
+* Finding the dlname::          Choosing the right file to @code{dlopen}.
+* Dlopen issues::               Unresolved problems that need your attention.
+@end menu
+
+@node Building modules
+@section Building modules to dlopen
+
+On some operating systems, a program symbol must be specially declared
+in order to be dynamically resolved with the @code{dlsym} (or
+equivalent) function.  Libtool provides the @option{-export-dynamic} and
+@option{-module} link flags (@pxref{Link mode}), for you to make that
+declaration.  You need to use these flags if you are linking an
+application program that dlopens other modules or a libtool library
+that will also be dlopened.
+
+For example, if we wanted to build a shared library, @file{hello},
+that would later be dlopened by an application, we would add
+@option{-module} to the other link flags:
+
+@example
+burger$ @kbd{libtool --mode=link gcc -module -o hello.la foo.lo \
+                hello.lo -rpath /usr/local/lib -lm}
+burger$
+@end example
+
+If symbols from your @emph{executable} are needed to satisfy unresolved
+references in a library you want to dlopen you will have to use the flag
+@option{-export-dynamic}.  You should use @option{-export-dynamic} while
+linking the executable that calls dlopen:
+
+@example
+burger$ @kbd{libtool --mode=link gcc -export-dynamic -o helldl main.o}
+burger$
+@end example
+
+@node Dlpreopening
+@section Dlpreopening
+
+Libtool provides special support for dlopening libtool object and
+libtool library files, so that their symbols can be resolved
+@emph{even on platforms without any @code{dlopen} and @code{dlsym}
+functions}.
+
+Consider the following alternative ways of loading code into your
+program, in order of increasing ``laziness'':
+
+@enumerate 1
+@item
+Linking against object files that become part of the program executable,
+whether or not they are referenced.  If an object file cannot be found,
+then the compile time linker refuses to create the executable.
+
+@item
+Declaring a static library to the linker, so that it is searched at link
+time in order to satisfy any undefined references in the above object
+files.  If the static library cannot be found, then the compile time
+linker refuses to create the executable.
+
+@item
+Declaring a shared library to the runtime linker, so that it is searched
+at runtime in order to satisfy any undefined references in the above
+files.  If the shared library cannot be found, then the dynamic linker
+aborts the program before it runs.
+
+@item
+Dlopening a module, so that the application can resolve its own,
+dynamically-computed references.  If there is an error opening the
+module, or the module is not found, then the application can recover
+without crashing.
+@end enumerate
+
+Libtool emulates @option{-dlopen} on static platforms by linking objects
+into the program at compile time, and creating data structures that
+represent the program's symbol table.  In order to use this feature,
+you must declare the objects you want your application to dlopen by
+using the @option{-dlopen} or @option{-dlpreopen} flags when you link your
+program (@pxref{Link mode}).
+
+@deftp {Data Type} {lt_dlsymlist} typedef struct @
+  @{ @w{const char *@var{name};} @w{void *@var{address};} @} lt_dlsymlist
+The @var{name} attribute is a null-terminated character string of the
+symbol name, such as @code{"fprintf"}.  The @var{address} attribute is a
+generic pointer to the appropriate object, such as @code{&fprintf}.
+@end deftp
+
+@deftypevar {const lt_dlsymlist } lt_preloaded_symbols[]
+An array of @code{lt_dlsymlist} structures, representing all the preloaded
+symbols linked into the program proper.  For each module
+@option{-dlpreopen}ed by the Libtool linked program
+there is an element with the @var{name} of the module and an @var{address}
+of @code{0}, followed by all symbols exported from this file.
+For the executable itself the special name @samp{@@PROGRAM@@} is used.
+The last element of all has a @var{name} and @var{address} of
+@code{0}.
+
+To facilitate inclusion of symbol lists into libraries,
+@code{lt_preloaded_symbols} is @samp{#define}d to a suitably unique name
+in @file{ltdl.h}.
+
+This variable may not be declared @code{const} on some systems due to
+relocation issues.
+@end deftypevar
+
+Some compilers may allow identifiers that are not valid in ANSI C, such
+as dollar signs.  Libtool only recognizes valid ANSI C symbols (an
+initial ASCII letter or underscore, followed by zero or more ASCII
+letters, digits, and underscores), so non-ANSI symbols will not appear
+in @code{lt_preloaded_symbols}.
+
+@deftypefun int lt_dlpreload (const lt_dlsymlist *@var{preloaded})
+Register the list of preloaded modules @var{preloaded}.
+If @var{preloaded} is @code{NULL}, then all previously registered
+symbol lists, except the list set by @code{lt_dlpreload_default},
+are deleted.  Return 0 on success.
+@end deftypefun
+
+@deftypefun int lt_dlpreload_default (const lt_dlsymlist *@var{preloaded})
+Set the default list of preloaded modules to @var{preloaded}, which
+won't be deleted by @code{lt_dlpreload}.  Note that this function does
+@emph{not} require libltdl to be initialized using @code{lt_dlinit} and
+can be used in the program to register the default preloaded modules.
+Instead of calling this function directly, most programs will use the
+macro @code{LTDL_SET_PRELOADED_SYMBOLS}.
+
+Return 0 on success.
+@end deftypefun
+
+@defmac LTDL_SET_PRELOADED_SYMBOLS
+Set the default list of preloaded symbols.
+Should be used in your program to initialize libltdl's
+list of preloaded modules.
+
+@example
+#include <ltdl.h>
+
+int main() @{
+  /* ... */
+  LTDL_SET_PRELOADED_SYMBOLS();
+  /* ... */
+@}
+@end example
+@end defmac
+
+@deftypefn {Function Type} {int} lt_dlpreload_callback_func (lt_dlhandle @var{handle})
+Functions of this type can be passed to @code{lt_dlpreload_open},
+which in turn will call back into a function thus passed for each
+preloaded module that it opens.
+@end deftypefn
+
+@deftypefun int lt_dlpreload_open (@w{const char *@var{originator},} @w{lt_dlpreload_callback_func *@var{func})}
+Load all of the preloaded modules for @var{originator}.  For every
+module opened in this way, call @var{func}.
+
+@noindent
+To open all of the modules preloaded into @file{libhell.la}
+(presumably from within the @file{libhell.a} initialisation code):
+
+@example
+#define preloaded_symbols lt_libhell_LTX_preloaded_symbols
+
+static int hell_preload_callback (lt_dlhandle handle);
+
+int
+hell_init (void)
+@{
+  @dots{}
+  if (lt_dlpreload (&preloaded_symbols) == 0)
+    @{
+      lt_dlpreload_open ("libhell", preload_callback);
+    @}
+  @dots{}
+@}
+@end example
+
+@noindent
+Note that to prevent clashes between multiple preloaded modules, the
+preloaded symbols are accessed via a mangled symbol name: to get the
+symbols preloaded into @samp{libhell}, you must prefix
+@samp{preloaded_symbols} with @samp{lt_}; the originator name,
+@samp{libhell} in this case; and @samp{_LTX_}.  That is,
+@samp{lt_libhell_LTX_preloaded_symbols} here.
+@end deftypefun
+
+
+@node Linking with dlopened modules
+@section Linking with dlopened modules
+@cindex linking, dlopen
+@cindex linking, dlpreopen
+
+When, say, an interpreter application uses dlopened modules to extend
+the list of methods it provides, an obvious abstraction for the
+maintainers of the interpreter is to have all methods (including the
+built in ones supplied with the interpreter) accessed through
+dlopen.  For one thing, the dlopening functionality will be tested
+even during routine invocations.  For another, only one subsystem has
+to be written for getting methods into the interpreter.
+
+The downside of this abstraction is, of course, that environments that
+provide only static linkage can't even load the intrinsic interpreter
+methods.  Not so!  We can statically link those methods by
+@strong{dlpreopening} them.
+
+Unfortunately, since platforms such as AIX and cygwin require
+that all library symbols must be resolved at compile time, the
+interpreter maintainers will need to provide a library to both its own
+dlpreopened modules, and third-party modules loaded by dlopen.  In
+itself, that is not so bad, except that the interpreter too must
+provide those same symbols otherwise it will be impossible to resolve
+all the symbols required by the modules as they are loaded.  Things
+are even worse if the code that loads the modules for the interpreter
+is itself in a library -- and that is usually the case for any
+non-trivial application.  Modern platforms take care of this by
+automatically loading all of a module's dependency libraries as the
+module is loaded (libltdl can do this even on platforms that can't do
+it by themselves).  In the end, this leads to problems with duplicated
+symbols and prevents modules from loading, and prevents the
+application from compiling when modules are preloaded.
+
+@example
+,-------------.    ,------------------.    ,-----------------.
+| Interpreter |---->     Module------------>   Third-party   |
+`-------------'    |     Loader       |    |Dlopened Modules |
+                   |        |         |    `-----------------'
+                   |,-------v--------.|             |
+                   ||  Dlpreopened   ||             |
+                   ||    Modules     ||             |
+                   |`----------------'|             |
+                   |        |         |             |
+                   |,-------v--------.|    ,--------v--------.
+                   ||Module Interface||    |Module Interface |
+                   ||    Library     ||    |     Library     |
+                   |`----------------'|    `-----------------'
+                   `------------------'
+@end example
+
+Libtool has the concept of @dfn{weak library interfaces} to circumvent
+this problem.  Recall that the code that dlopens method-provider
+modules for the interpreter application resides in a library: All of
+the modules and the dlopener library itself should be linked against
+the common library that resolves the module symbols at compile time.
+To guard against duplicate symbol definitions, and for dlpreopened
+modules to work at all in this scenario, the dlopener library must
+declare that it provides a weak library interface to the common
+symbols in the library it shares with the modules.  That way, when
+@command{libtool} links the @strong{Module Loader} library with some
+@strong{Dlpreopened Modules} that were in turn linked against the
+@strong{Module Interface Library}, it knows that the @strong{Module
+Loader} provides an already loaded @strong{Module Interface Library}
+to resolve symbols for the @strong{Dlpreopened Modules}, and doesn't
+ask the compiler driver to link an identical @strong{Module Interface
+Library} dependency library too.
+
+In conjunction with Automake, the @file{Makefile.am} for the
+@strong{Module Loader} might look like this:
+
+@example
+lib_LTLIBRARIES = libinterface.la libloader.la
+
+libinterface_la_SOURCES = interface.c interface.h
+libinterface_la_LDFLAGS = -version-info 3:2:1
+
+libloader_la_SOURCES    = loader.c
+libloader_la_LDFLAGS    = -weak libinterface.la \
+                          -version-info 3:2:1 \
+                          -dlpreopen ../modules/intrinsics.la
+libloader_la_LIBADD     = $(libinterface_la_OBJECTS)
+@end example
+
+And the @file{Makefile.am} for the @file{intrinsics.la} module in a
+sibling @file{modules} directory might look like this:
+
+@example
+AM_CPPFLAGS             = -I$(srcdir)/../libloader
+AM_LDFLAGS              = -no-undefined -module -avoid-version \
+                          -export-dynamic
+
+noinst_LTLIBRARIES      = intrinsics.la
+
+intrinsics_la_LIBADD    = ../libloader/libinterface.la
+
+../libloader/libinterface.la:
+        cd ../libloader && $(MAKE) $(AM_MAKEFLAGS) libinterface.la
+@end example
+
+@cindex @option{-weak} option
+For a more complex example, see the sources of @file{libltdl} in the
+Libtool distribution, which is built with the help of the @option{-weak}
+option.
+
+
+@node Finding the dlname
+@section Finding the correct name to dlopen
+@cindex names of dynamic modules
+@cindex dynamic modules, names
+
+After a library has been linked with @option{-module}, it can be dlopened.
+Unfortunately, because of the variation in library names,
+your package needs to determine the correct file to dlopen.
+
+The most straightforward and flexible implementation is to determine the
+name at runtime, by finding the installed @file{.la} file, and searching
+it for the following lines:
+
+@example
+# The name that we can @code{dlopen}.
+dlname='@var{dlname}'
+@end example
+
+If @var{dlname} is empty, then the library cannot be dlopened.
+Otherwise, it gives the dlname of the library.  So, if the library was
+installed as @file{/usr/local/lib/libhello.la}, and the @var{dlname} was
+@file{libhello.so.3}, then @file{/usr/local/lib/libhello.so.3} should be
+dlopened.
+
+If your program uses this approach, then it should search the
+directories listed in the @code{LD_LIBRARY_PATH}@footnote{@code{LIBPATH}
+on AIX, and @code{SHLIB_PATH} on HP-UX.} environment variable, as well as
+the directory where libraries will eventually be installed.  Searching
+this variable (or equivalent) will guarantee that your program can find
+its dlopened modules, even before installation, provided you have linked
+them using libtool.
+
+@node Dlopen issues
+@section Unresolved dlopen issues
+@cindex pitfalls with dlopen
+@cindex dlopening, pitfalls
+@cindex trouble with dlopen
+
+The following problems are not solved by using libtool's dlopen support:
+
+@itemize @bullet
+@item
+Dlopen functions are generally only available on shared library
+platforms.  If you want your package to be portable to static platforms,
+you have to use either libltdl (@pxref{Using libltdl}) or develop your
+own alternatives to dlopening dynamic code.
+Most reasonable solutions involve writing wrapper functions for the
+@code{dlopen} family, which do package-specific tricks when dlopening
+is unsupported or not available on a given platform.
+
+@item
+There are major differences in implementations of the @code{dlopen}
+family of functions.  Some platforms do not even use the same function
+names (notably HP-UX, with its @code{shl_load} family).
+
+@item
+The application developer must write a custom search function in order
+to discover the correct module filename to supply to @code{dlopen}.
+@end itemize
+
+@node Using libltdl
+@chapter Using libltdl
+@findex libltdl
+@findex dlopen
+@findex dlsym
+@findex dlclose
+@findex dlerror
+@findex shl_load
+@cindex dynamic linking, applications
+@cindex dlopening modules
+@cindex modules, dynamic
+@cindex application-level dynamic linking
+
+Libtool provides a small library, called @file{libltdl}, that aims at
+hiding the various difficulties of dlopening libraries from programmers.
+It consists of a few headers and small C source files that can be
+distributed with applications that need dlopening functionality.  On
+some platforms, whose dynamic linkers are too limited for a simple
+implementation of @file{libltdl} services, it requires GNU DLD, or it
+will only emulate dynamic linking with libtool's dlpreopening mechanism.
+
+@noindent
+libltdl supports currently the following dynamic linking mechanisms:
+
+@itemize @bullet
+@item
+@code{dlopen} (POSIX compliant systems, GNU/Linux, etc.)
+@item
+@code{shl_load} (HP-UX)
+@item
+@code{LoadLibrary} (Win16 and Win32)
+@item
+@code{load_add_on} (BeOS)
+@item
+@code{NSAddImage} or @code{NSLinkModule} (Darwin and Mac OS X)
+@item
+GNU DLD (emulates dynamic linking for static libraries)
+@item
+libtool's dlpreopen (see @pxref{Dlpreopening})
+@end itemize
+
+@noindent
+libltdl is licensed under the terms of the GNU Lesser General
+Public License, with the following exception:
+
+@quotation
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include it under the same
+distribution terms that you use for the rest of that program.
+@end quotation
+
+@menu
+* Libltdl interface::           How to use libltdl in your programs.
+* Modules for libltdl::         Creating modules that can be @code{dlopen}ed.
+* Thread Safety in libltdl::    Registering callbacks for multi-thread safety.
+* User defined module data::    Associating data with loaded modules.
+* Module loaders for libltdl::  Creating user defined module loaders.
+* Distributing libltdl::        How to distribute libltdl with your package.
+@end menu
+
+@node Libltdl interface
+@section How to use libltdl in your programs
+
+@noindent
+The libltdl API is similar to the POSIX dlopen interface,
+which is very simple but powerful.
+
+@noindent
+To use libltdl in your program you have to include the header file @file{ltdl.h}:
+
+@example
+#include <ltdl.h>
+@end example
+
+@noindent
+The early releases of libltdl used some symbols that violated the
+POSIX namespace conventions.  These symbols are now deprecated,
+and have been replaced by those described here.  If you have code that
+relies on the old deprecated symbol names, defining
+@samp{LT_NON_POSIX_NAMESPACE} before you include @file{ltdl.h} provides
+conversion macros.  Whichever set of symbols you use, the new API is
+not binary compatible with the last, so you will need to recompile
+your application in order to use this version of libltdl.
+
+@noindent
+Note that libltdl is not well tested in a multithreaded environment,
+though the intention is that it should work (@pxref{Thread Safety
+in libltdl, , Using libltdl in a multi threaded environment}).  It was
+reported that GNU/Linux's glibc 2.0's @code{dlopen} with
+@samp{RTLD_LAZY} (which libltdl uses by default) is not thread-safe,
+but this problem is supposed to be fixed in glibc 2.1.  On the other
+hand, @samp{RTLD_NOW} was reported to introduce problems in
+multi-threaded applications on FreeBSD@.  Working around these problems
+is left as an exercise for the reader; contributions are certainly
+welcome.
+
+@noindent
+The following macros are defined by including @file{ltdl.h}:
+
+@defmac LT_PATHSEP_CHAR
+@code{LT_PATHSEP_CHAR} is the system-dependent path separator,
+that is, @samp{;} on Windows and @samp{:} everywhere else.
+@end defmac
+
+@defmac LT_DIRSEP_CHAR
+If @code{LT_DIRSEP_CHAR} is defined, it can be used as directory
+separator in addition to @samp{/}.  On Windows, this contains
+@samp{\}.
+@end defmac
+
+
+@noindent
+The following types are defined in @file{ltdl.h}:
+
+@deftp {Type} lt_dlhandle
+@code{lt_dlhandle} is a module ``handle''.
+Every lt_dlopened module has a handle associated with it.
+@end deftp
+
+@deftp {Type} lt_dladvise
+@code{lt_dladvise} is used to control optional module loading modes.
+If it is not used, the default mode of the underlying system module
+loader is used.
+@end deftp
+
+@deftp {Type} lt_dlsymlist
+@code{lt_dlsymlist} is a symbol list for dlpreopened modules.
+This structure is described in @pxref{Dlpreopening}.
+@end deftp
+
+@page
+@noindent
+libltdl provides the following functions:
+
+@deftypefun int lt_dlinit (void)
+Initialize libltdl.
+This function must be called before using libltdl
+and may be called several times.
+Return 0 on success, otherwise the number of errors.
+@end deftypefun
+
+@deftypefun int lt_dlexit (void)
+Shut down libltdl and close all modules.
+This function will only then shut down libltdl when it was called as
+many times as @code{lt_dlinit} has been successfully called.
+Return 0 on success, otherwise the number of errors.
+@end deftypefun
+
+@deftypefun lt_dlhandle lt_dlopen (const char *@var{filename})
+Open the module with the file name @var{filename} and return a
+handle for it.  @code{lt_dlopen} is able to open libtool dynamic
+modules, preloaded static modules, the program itself and
+native dynamic modules@footnote{Some platforms, notably Mac OS X,
+differentiate between a runtime library that cannot be opened by
+@code{lt_dlopen} and a dynamic module that can.  For maximum
+portability you should try to ensure that you only pass
+@code{lt_dlopen} objects that have been compiled with libtool's
+@option{-module} flag.}.
+
+Unresolved symbols in the module are resolved using its dependency
+libraries and previously dlopened modules.  If the executable using
+this module was linked with the @option{-export-dynamic} flag, then the
+global symbols in the executable will also be used to resolve
+references in the module.
+
+If @var{filename} is @code{NULL} and the program was linked with
+@option{-export-dynamic} or @option{-dlopen self}, @code{lt_dlopen} will
+return a handle for the program itself, which can be used to access its
+symbols.
+
+If libltdl cannot find the library and the file name @var{filename} does
+not have a directory component it will additionally look in the
+following search paths for the module (in the following order):
+
+@enumerate 1
+@item user-defined search path:
+This search path can be changed by the program using the
+functions @code{lt_dlsetsearchpath}, @code{lt_dladdsearchdir} and
+@code{lt_dlinsertsearchdir}.
+
+@item libltdl's search path:
+This search path is the value of the environment variable
+@env{LTDL_LIBRARY_PATH}.
+
+@item system library search path:
+The system dependent library search path
+(e.g.@: on GNU/Linux it is @env{LD_LIBRARY_PATH}).
+@end enumerate
+
+Each search path must be a list of absolute directories separated by
+@code{LT_PATHSEP_CHAR}, for example, @code{"/usr/lib/mypkg:/lib/foo"}.
+The directory names may not contain the path separator.
+
+If the same module is loaded several times, the same handle is returned.
+If @code{lt_dlopen} fails for any reason, it returns @code{NULL}.
+@end deftypefun
+
+@deftypefun lt_dlhandle lt_dlopenext (const char *@var{filename})
+The same as @code{lt_dlopen}, except that it tries to append
+different file name extensions to the file name.
+If the file with the file name @var{filename} cannot be found
+libltdl tries to append the following extensions:
+
+@enumerate 1
+@item the libtool archive extension @file{.la}
+@item the extension used for native dynamically loadable modules on the host platform, e.g., @file{.so}, @file{.sl}, etc.
+@end enumerate
+
+This lookup strategy was designed to allow programs that don't
+have knowledge about native dynamic libraries naming conventions
+to be able to @code{dlopen} such libraries as well as libtool modules
+transparently.
+@end deftypefun
+
+@deftypefun lt_dlhandle lt_dlopenadvise (const char *@var{filename}, @w{lt_dladvise @var{advise}})
+The same as @code{lt_dlopen}, except that it also requires an additional
+argument which may contain additional hints to the underlying system
+module loader.  The @var{advise} parameter is opaque and can only be
+accessed with the functions documented below.
+
+Note that this function does not change the content of @var{advise}, so
+unlike the other calls in this API takes a direct @code{lt_dladvise}
+type, and not a pointer to the same.
+@end deftypefun
+
+@deftypefun int lt_dladvise_init (lt_dladvise *@var{advise})
+The @var{advise} parameter can be used to pass hints to the module
+loader when using @code{lt_dlopenadvise} to perform the loading.
+The @var{advise} parameter needs to be initialised by this function
+before it can be used.  Any memory used by @var{advise} needs to be
+recycled with @code{lt_dladvise_destroy} when it is no longer needed.
+
+On failure, @code{lt_dladvise_init} returns non-zero and sets an error
+message that can be retrieved with @code{lt_dlerror}.
+@end deftypefun
+
+@deftypefun int lt_dladvise_destroy (lt_dladvise *@var{advise})
+Recycle the memory used by @var{advise}.  For an example, see the
+documentation for @code{lt_dladvise_ext}.
+
+On failure, @code{lt_dladvise_destroy} returns non-zero and sets an error
+message that can be retrieved with @code{lt_dlerror}.
+@end deftypefun
+
+@deftypefun int lt_dladvise_ext (lt_dladvise *@var{advise})
+Set the @code{ext} hint on @var{advise}.  Passing an @var{advise}
+parameter to @code{lt_dlopenadvise} with this hint set causes it to
+try to append different file name extensions like @code{lt_dlopenext}.
+
+The following example is equivalent to calling
+@code{lt_dlopenext (filename)}:
+
+@example
+lt_dlhandle
+my_dlopenext (const char *filename)
+@{
+  lt_dlhandle handle = 0;
+  lt_dladvise advise;
+
+  if (!lt_dladvise_init (&advise) && !lt_dladvise_ext (&advise))
+    handle = lt_dlopenadvise (filename, advise);
+
+  lt_dladvise_destroy (&advise);
+
+  return handle;
+@}
+@end example
+
+On failure, @code{lt_dladvise_ext} returns non-zero and sets an error
+message that can be retrieved with @code{lt_dlerror}.
+@end deftypefun
+
+@deftypefun int lt_dladvise_global (lt_dladvise *@var{advise})
+Set the @code{symglobal} hint on @var{advise}.  Passing an @var{advise}
+parameter to @code{lt_dlopenadvise} with this hint set causes it to try
+to make the loaded module's symbols globally available for resolving
+unresolved symbols in subsequently loaded modules.
+
+If neither the @code{symglobal} nor the @code{symlocal} hints are set,
+or if a module is loaded without using the @code{lt_dlopenadvise} call
+in any case, then the visibility of the module's symbols will be as per
+the default for the underlying module loader and OS.  Even if a
+suitable hint is passed, not all loaders are able to act upon it in
+which case @code{lt_dlgetinfo} will reveal whether the hint was actually
+followed.
+
+On failure, @code{lt_dladvise_global} returns non-zero and sets an error
+message that can be retrieved with @code{lt_dlerror}.
+@end deftypefun
+
+@deftypefun int lt_dladvise_local (lt_dladvise *@var{advise})
+Set the @code{symlocal} hint on @var{advise}.  Passing an @var{advise}
+parameter to @code{lt_dlopenadvise} with this hint set causes it to try
+to keep the loaded module's symbols hidden so that they are not
+visible to subsequently loaded modules.
+
+If neither the @code{symglobal} nor the @code{symlocal} hints are set,
+or if a module is loaded without using the @code{lt_dlopenadvise} call
+in any case, then the visibility of the module's symbols will be as per
+the default for the underlying module loader and OS.  Even if a
+suitable hint is passed, not all loaders are able to act upon it in
+which case @code{lt_dlgetinfo} will reveal whether the hint was actually
+followed.
+
+On failure, @code{lt_dladvise_local} returns non-zero and sets an error
+message that can be retrieved with @code{lt_dlerror}.
+@end deftypefun
+
+@deftypefun int lt_dladvise_resident (lt_dladvise *@var{advise})
+Set the @code{resident} hint on @var{advise}.  Passing an @var{advise}
+parameter to @code{lt_dlopenadvise} with this hint set causes it to try
+to make the loaded module resident in memory, so that it cannot be
+unloaded with a later call to @code{lt_dlclose}.
+
+On failure, @code{lt_dladvise_resident} returns non-zero and sets an error
+message that can be retrieved with @code{lt_dlerror}.
+@end deftypefun
+
+@deftypefun int lt_dladvise_preload (lt_dladvise *@var{advise})
+Set the @code{preload} hint on @var{advise}.  Passing an @var{advise}
+parameter to @code{lt_dlopenadvise} with this hint set causes it to
+load only preloaded modules, so that if a suitable preloaded module is
+not found, @code{lt_dlopenadvise} will return @code{NULL}.
+@end deftypefun
+
+@deftypefun int lt_dlclose (lt_dlhandle @var{handle})
+Decrement the reference count on the module @var{handle}.
+If it drops to zero and no other module depends on this module,
+then the module is unloaded.
+Return 0 on success.
+@end deftypefun
+
+@deftypefun {void *} lt_dlsym (lt_dlhandle @var{handle}, const char *@var{name})
+Return the address in the module @var{handle}, where the symbol given
+by the null-terminated string @var{name} is loaded.
+If the symbol cannot be found, @code{NULL} is returned.
+@end deftypefun
+
+@deftypefun {const char *} lt_dlerror (void)
+Return a human readable string describing the most
+recent error that occurred from any of libltdl's functions.
+Return @code{NULL} if no errors have occurred since initialization
+or since it was last called.
+@end deftypefun
+
+@deftypefun int lt_dladdsearchdir (const char *@var{search_dir})
+Append the search directory @var{search_dir} to the current user-defined
+library search path.  Return 0 on success.
+@end deftypefun
+
+@deftypefun int lt_dlinsertsearchdir (@w{const char *@var{before}}, @w{const char *@var{search_dir}})
+Insert the search directory @var{search_dir} into the user-defined library
+search path, immediately before the element starting at address
+@var{before}.  If @var{before} is @samp{NULL}, then @var{search_dir} is
+appending as if @code{lt_dladdsearchdir} had been called.  Return 0 on success.
+@end deftypefun
+
+@deftypefun int lt_dlsetsearchpath (const char *@var{search_path})
+Replace the current user-defined library search path with
+@var{search_path}, which must be a list of absolute directories separated
+by @code{LT_PATHSEP_CHAR}.  Return 0 on success.
+@end deftypefun
+
+@deftypefun {const char *} lt_dlgetsearchpath (void)
+Return the current user-defined library search path.
+@end deftypefun
+
+@deftypefun int lt_dlforeachfile (@w{const char *@var{search_path}}, @w{int (*@var{func}) (const char *@var{filename}, void * @var{data})}, @w{void * @var{data}})
+In some applications you may not want to load individual modules with
+known names, but rather find all of the modules in a set of
+directories and load them all during initialisation.  With this function
+you can have libltdl scan the @code{LT_PATHSEP_CHAR}-delimited directory list
+in @var{search_path} for candidates, and pass them, along with
+@var{data} to your own callback function, @var{func}.  If @var{search_path} is
+@samp{NULL}, then search all of the standard locations that
+@code{lt_dlopen} would examine.  This function will continue to make
+calls to @var{func} for each file that it discovers in @var{search_path}
+until one of these calls returns non-zero, or until the files are
+exhausted.  @samp{lt_dlforeachfile} returns the value returned by the last
+call made to @var{func}.
+
+For example you could define @var{func} to build an ordered
+@dfn{argv}-like vector of files using @var{data} to hold the address of
+the start of the vector.
+@end deftypefun
+
+@deftypefun int lt_dlmakeresident (lt_dlhandle @var{handle})
+Mark a module so that it cannot be @samp{lt_dlclose}d.  This can be
+useful if a module implements some core functionality in your project
+that would cause your code to crash if removed.  Return 0 on success.
+
+If you use @samp{lt_dlopen (NULL)} to get a @var{handle} for the running
+binary, that handle will always be marked as resident, and consequently
+cannot be successfully @samp{lt_dlclose}d.
+@end deftypefun
+
+@deftypefun int lt_dlisresident (lt_dlhandle @var{handle})
+Check whether a particular module has been marked as resident, returning 1
+if it has or 0 otherwise.  If there is an error while executing this
+function, return -1 and set an error message for retrieval with
+@code{lt_dlerror}.
+@end deftypefun
+
+@node Modules for libltdl
+@section Creating modules that can be @code{dlopen}ed
+
+Libtool modules are created like normal libtool libraries with a few
+exceptions:
+
+You have to link the module with libtool's @option{-module} switch,
+and you should link any program that is intended to dlopen the module with
+@option{-dlopen @var{modulename.la}} where possible, so that libtool can
+dlpreopen the module on platforms that do not support dlopening.  If
+the module depends on any other libraries, make sure you specify them
+either when you link the module or when you link programs that dlopen it.
+If you want to disable versioning (@pxref{Versioning}) for a specific module
+you should link it with the @option{-avoid-version} switch.
+Note that libtool modules don't need to have a "lib" prefix.
+However, Automake 1.4 or higher is required to build such modules.
+
+Usually a set of modules provide the same interface, i.e.@: exports the same
+symbols, so that a program can dlopen them without having to know more
+about their internals: In order to avoid symbol conflicts all exported
+symbols must be prefixed with "modulename_LTX_" (@var{modulename} is
+the name of the module).  Internal symbols must be named in such a way
+that they won't conflict with other modules, for example, by prefixing
+them with "_modulename_".  Although some platforms support having the
+same symbols defined more than once it is generally not portable and
+it makes it impossible to dlpreopen such modules.
+
+libltdl will automatically cut the prefix off to get the real name of
+the symbol.  Additionally, it supports modules that do not use a
+prefix so that you can also dlopen non-libtool modules.
+
+@file{foo1.c} gives an example of a portable libtool module.
+Exported symbols are prefixed with "foo1_LTX_", internal symbols
+with "_foo1_".  Aliases are defined at the beginning so that the code
+is more readable.
+
+@example
+/* aliases for the exported symbols */
+#define foo  foo1_LTX_foo
+#define bar  foo1_LTX_bar
+
+/* a global variable definition */
+int bar = 1;
+
+/* a private function */
+int _foo1_helper() @{
+  return bar;
+@}
+
+/* an exported function */
+int foo() @{
+  return _foo1_helper();
+@}
+@end example
+
+@noindent
+The @file{Makefile.am} contains the necessary rules to build the
+module @file{foo1.la}:
+
+@example
+...
+lib_LTLIBRARIES = foo1.la
+
+foo1_la_SOURCES = foo1.c
+foo1_la_LDFLAGS = -module
+...
+@end example
+
+
+@node Thread Safety in libltdl
+@section Using libltdl in a multi threaded environment
+
+Libltdl provides a wrapper around whatever dynamic run-time object
+loading mechanisms are provided by the host system, many of which are
+themselves not thread safe.  Consequently libltdl cannot itself be
+consistently thread safe.
+
+If you wish to use libltdl in a multithreaded environment, then you
+must mutex lock around libltdl calls, since they may in turn be calling
+non-thread-safe system calls on some target hosts.
+
+Some old releases of libtool provided a mutex locking API that
+was unusable with POSIX threads, so callers were forced to lock around
+all libltdl API calls anyway.  That mutex locking API was
+next to useless, and is not present in current releases.
+
+Some future release of libtool may provide a new POSIX thread
+compliant mutex locking API.
+
+@node User defined module data
+@section Data associated with loaded modules
+
+Some of the internal information about each loaded module that is
+maintained by libltdl is available to the user, in the form of this
+structure:
+
+@deftypefn {Type} {struct} lt_dlinfo @{ @w{char *@var{filename};} @
+  @w{char *@var{name};} @w{int @var{ref_count};} @
+  @w{int @var{is_resident};} @w{int @var{is_symglobal};} @
+  @w{int @var{is_symlocal};}@}
+@code{lt_dlinfo} is used to store information about a module.
+The @var{filename} attribute is a null-terminated character string of
+the real module file name.  If the module is a libtool module then
+@var{name} is its module name (e.g.@: @code{"libfoo"} for
+@code{"dir/libfoo.la"}), otherwise it is set to @code{NULL}.  The
+@var{ref_count} attribute is a reference counter that describes how
+often the same module is currently loaded. The remaining fields can
+be compared to any hints that were passed to @code{lt_dlopenadvise}
+to determine whether the underlying loader was able to follow them.
+@end deftypefn
+
+The following function will return a pointer to libltdl's internal copy
+of this structure for the given @var{handle}:
+
+@deftypefun {const lt_dlinfo *} lt_dlgetinfo (@w{lt_dlhandle @var{handle}})
+Return a pointer to a struct that contains some information about
+the module @var{handle}.  The contents of the struct must not be modified.
+Return @code{NULL} on failure.
+@end deftypefun
+
+Furthermore, in order to save you from having to keep a list of the
+handles of all the modules you have loaded, these functions allow you to
+iterate over libltdl's list of loaded modules:
+
+@deftp {Type} lt_dlinterface_id
+The opaque type used to hold the module interface details for each
+registered libltdl client.
+@end deftp
+
+@deftypefn {Type} int lt_dlhandle_interface (@w{lt_dlhandle @var{handle},} @
+  @w{const char *@var{id_string}})
+Functions of this type are called to check that a handle conforms to a
+library's expected module interface when iterating over the global
+handle list.  You should be careful to write a callback function of
+this type that can correctly identify modules that belong to this
+client, both to prevent other clients from accidentally finding your
+loaded modules with the iterator functions below, and vice versa.  The
+best way to do this is to check that module @var{handle} conforms
+to the interface specification of your loader using @code{lt_dlsym}.
+
+The callback may be given @strong{every} module loaded by all the
+libltdl module clients in the current address space, including any
+modules loaded by other libraries such as libltdl itself, and should
+return non-zero if that module does not fulfill the interface
+requirements of your loader.
+
+@example
+int
+my_interface_cb (lt_dlhandle handle, const char *id_string)
+@{
+  char *(*module_id) (void) = NULL;
+
+  /* @r{A valid my_module must provide all of these symbols.}  */
+  if (!((module_id = (char*(*)(void)) lt_dlsym ("module_version"))
+        && lt_dlsym ("my_module_entrypoint")))
+      return 1;
+
+  if (strcmp (id_string, module_id()) != 0)
+      return 1;
+
+  return 0;
+@}
+@end example
+@end deftypefn
+
+@deftypefun lt_dlinterface_id lt_dlinterface_register @
+  (@w{const char *@var{id_string}}, @w{lt_dlhandle_interface *@var{iface}})
+Use this function to register your interface validator with libltdl,
+and in return obtain a unique key to store and retrieve per-module data.
+You supply an @var{id_string} and @var{iface} so that the resulting
+@code{lt_dlinterface_id} can be used to filter the module handles
+returned by the iteration functions below.  If @var{iface} is @code{NULL},
+all modules will be matched.
+@end deftypefun
+
+@deftypefun void lt_dlinterface_free (@w{lt_dlinterface_id @var{iface}})
+Release the data associated with @var{iface}.
+@end deftypefun
+
+@deftypefun int lt_dlhandle_map (@w{lt_dlinterface_id @var{iface}}, @
+  @w{int (*@var{func}) (lt_dlhandle @var{handle}, void * @var{data})}, @
+  @w{void * @var{data}})
+For each module that matches @var{iface}, call the function
+@var{func}.  When writing the @var{func} callback function, the
+argument @var{handle} is the handle of a loaded module, and
+@var{data} is the last argument passed to @code{lt_dlhandle_map}. As
+soon as @var{func} returns a non-zero value for one of the handles,
+@code{lt_dlhandle_map} will stop calling @var{func} and immediately
+return that non-zero value.  Otherwise 0 is eventually returned when
+@var{func} has been successfully called for all matching modules.
+@end deftypefun
+
+@deftypefun lt_dlhandle lt_dlhandle_iterate (@w{lt_dlinterface_id @
+  @var{iface}}, @w{lt_dlhandle @var{place}})
+Iterate over the module handles loaded by @var{iface}, returning the
+first matching handle in the list if @var{place} is @code{NULL}, and
+the next one on subsequent calls.  If @var{place} is the last element
+in the list of eligible modules, this function returns @code{NULL}.
+
+@example
+lt_dlhandle handle = 0;
+lt_dlinterface_id iface = my_interface_id;
+
+while ((handle = lt_dlhandle_iterate (iface, handle)))
+  @{
+    @dots{}
+  @}
+@end example
+@end deftypefun
+
+@deftypefun lt_dlhandle lt_dlhandle_fetch (@w{lt_dlinterface_id @var{iface}}, @w{const char *@var{module_name}})
+Search through the module handles loaded by @var{iface} for a module named
+@var{module_name}, returning its handle if found or else @code{NULL}
+if no such named module has been loaded by @var{iface}.
+@end deftypefun
+
+However, you might still need to maintain your own list of loaded
+module handles (in parallel with the list maintained inside libltdl)
+if there were any other data that your application wanted to associate
+with each open module.  Instead, you can use the following API
+calls to do that for you.  You must first obtain a unique interface id
+from libltdl as described above, and subsequently always use it to
+retrieve the data you stored earlier.  This allows different libraries
+to each store their own data against loaded modules, without
+interfering with one another.
+
+@deftypefun {void *} lt_dlcaller_set_data (@w{lt_dlinterface_id @var{key}}, @w{lt_dlhandle @var{handle}}, @w{void * @var{data}})
+Set @var{data} as the set of data uniquely associated with @var{key} and
+@var{handle} for later retrieval.  This function returns the @var{data}
+previously associated with @var{key} and @var{handle} if any.  A result of
+0, may indicate that a diagnostic for the last error (if any) is available
+from @code{lt_dlerror()}.
+
+For example, to correctly remove some associated data:
+
+@example
+void *stale = lt_dlcaller_set_data (key, handle, 0);
+if (stale != NULL)
+  @{
+    free (stale);
+  @}
+else
+  @{
+    char *error_msg = lt_dlerror ();
+
+    if (error_msg != NULL)
+      @{
+        my_error_handler (error_msg);
+        return STATUS_FAILED;
+      @}
+  @}
+@end example
+@end deftypefun
+
+@deftypefun {void *} lt_dlcaller_get_data (@w{lt_dlinterface_id @var{key}}, @w{lt_dlhandle @var{handle}})
+Return the address of the data associated with @var{key} and
+@var{handle}, or else @code{NULL} if there is none.
+@end deftypefun
+
+Old versions of libltdl also provided a simpler, but similar, API
+based around @code{lt_dlcaller_id}.  Unfortunately, it had no
+provision for detecting whether a module belonged to a particular
+interface as libltdl didn't support multiple loaders in the same
+address space at that time.  Those APIs are no longer supported
+as there would be no way to stop clients of the old APIs from
+seeing (and accidentally altering) modules loaded by other libraries.
+
+
+@node Module loaders for libltdl
+@section How to create and register new module loaders
+
+Sometimes libltdl's many ways of gaining access to modules are not
+sufficient for the purposes of a project.  You can write your own
+loader, and register it with libltdl so that @code{lt_dlopen} will be
+able to use it.
+
+Writing a loader involves writing at least three functions that can be
+called by @code{lt_dlopen}, @code{lt_dlsym} and @code{lt_dlclose}.
+Optionally, you can provide a finalisation function to perform any
+cleanup operations when @code{lt_dlexit} executes, and a symbol prefix
+string that will be prepended to any symbols passed to @code{lt_dlsym}.
+These functions must match the function pointer types below, after
+which they can be allocated to an instance of @code{lt_user_dlloader}
+and registered.
+
+Registering the loader requires that you choose a name for it, so that it
+can be recognised by @code{lt_dlloader_find} and removed with
+@code{lt_dlloader_remove}.  The name you choose must be unique, and not
+already in use by libltdl's builtin loaders:
+
+@table @asis
+@item "dlopen"
+The system dynamic library loader, if one exists.
+@item "dld"
+The GNU dld loader, if @file{libdld} was installed when libltdl was
+built.
+@item "dlpreload"
+The loader for @code{lt_dlopen}ing of preloaded static modules.
+@end table
+
+The prefix "dl" is reserved for loaders supplied with future versions of
+libltdl, so you should not use that for your own loader names.
+
+@noindent
+The following types are defined in @file{ltdl.h}:
+
+@deftp {Type} lt_module
+@code{lt_module} is a dlloader dependent module.
+The dynamic module loader extensions communicate using these low
+level types.
+@end deftp
+
+@deftp {Type} lt_dlloader
+@code{lt_dlloader} is a handle for module loader types.
+@end deftp
+
+@deftp {Type} lt_user_data
+@code{lt_user_data} is used for specifying loader instance data.
+@end deftp
+
+@deftypefn {Type} {struct} lt_user_dlloader @{@w{const char *@var{sym_prefix};} @w{lt_module_open *@var{module_open};} @w{lt_module_close *@var{module_close};} @w{lt_find_sym *@var{find_sym};} @w{lt_dlloader_exit *@var{dlloader_exit};} @}
+If you want to define a new way to open dynamic modules, and have the
+@code{lt_dlopen} API use it, you need to instantiate one of these
+structures and pass it to @code{lt_dlloader_add}.  You can pass whatever
+you like in the @var{dlloader_data} field, and it will be passed back as
+the value of the first parameter to each of the functions specified in
+the function pointer fields.
+@end deftypefn
+
+@deftypefn {Type} lt_module lt_module_open (@w{const char *@var{filename}})
+The type of the loader function for an @code{lt_dlloader} module
+loader.  The value set in the dlloader_data field of the @code{struct
+lt_user_dlloader} structure will be passed into this function in the
+@var{loader_data} parameter.  Implementation of such a function should
+attempt to load the named module, and return an @code{lt_module}
+suitable for passing in to the associated @code{lt_module_close} and
+@code{lt_sym_find} function pointers.  If the function fails it should
+return @code{NULL}, and set the error message with @code{lt_dlseterror}.
+@end deftypefn
+
+@deftypefn {Type} int lt_module_close (@w{lt_user_data @var{loader_data},} @w{lt_module @var{module}})
+The type of the unloader function for a user defined module loader.
+Implementation of such a function should attempt to release
+any resources tied up by the @var{module} module, and then unload it
+from memory.  If the function fails for some reason, set the error
+message with @code{lt_dlseterror} and return non-zero.
+@end deftypefn
+
+@deftypefn {Type} {void *} lt_find_sym (@w{lt_module @var{module},} @w{const char *@var{symbol}})
+The type of the symbol lookup function for a user defined module loader.
+Implementation of such a function should return the address of the named
+@var{symbol} in the module @var{module}, or else set the error message
+with @code{lt_dlseterror} and return @code{NULL} if lookup fails.
+@end deftypefn
+
+@deftypefn {Type} int lt_dlloader_exit (@w{lt_user_data @var{loader_data}})
+The type of the finalisation function for a user defined module loader.
+Implementation of such a function should free any resources associated
+with the loader, including any user specified data in the
+@code{dlloader_data} field of the @code{lt_user_dlloader}.  If non-@code{NULL},
+the function will be called by @code{lt_dlexit}, and
+@code{lt_dlloader_remove}.
+@end deftypefn
+
+For example:
+
+@example
+int
+register_myloader (void)
+@{
+  lt_user_dlloader dlloader;
+
+  /* User modules are responsible for their own initialisation. */
+  if (myloader_init () != 0)
+    return MYLOADER_INIT_ERROR;
+
+  dlloader.sym_prefix    = NULL;
+  dlloader.module_open   = myloader_open;
+  dlloader.module_close  = myloader_close;
+  dlloader.find_sym      = myloader_find_sym;
+  dlloader.dlloader_exit = myloader_exit;
+  dlloader.dlloader_data = (lt_user_data)myloader_function;
+
+  /* Add my loader as the default module loader. */
+  if (lt_dlloader_add (lt_dlloader_next (NULL), &dlloader,
+                       "myloader") != 0)
+    return ERROR;
+
+  return OK;
+@}
+@end example
+
+Note that if there is any initialisation required for the loader,
+it must be performed manually before the loader is registered --
+libltdl doesn't handle user loader initialisation.
+
+Finalisation @emph{is} handled by libltdl however, and it is important
+to ensure the @code{dlloader_exit} callback releases any resources claimed
+during the initialisation phase.
+
+@page
+@noindent
+libltdl provides the following functions for writing your own module
+loaders:
+
+@deftypefun int lt_dlloader_add (@w{lt_dlloader *@var{place},} @
+  @w{lt_user_dlloader *@var{dlloader},} @w{const char *@var{loader_name}})
+Add a new module loader to the list of all loaders, either as the
+last loader (if @var{place} is @code{NULL}), else immediately before the
+loader passed as @var{place}.  @var{loader_name} will be returned by
+@code{lt_dlloader_name} if it is subsequently passed a newly
+registered loader.  These @var{loader_name}s must be unique, or
+@code{lt_dlloader_remove} and @code{lt_dlloader_find} cannot
+work.  Returns 0 for success.
+
+@example
+/* Make myloader be the last one. */
+if (lt_dlloader_add (NULL, myloader) != 0)
+  perror (lt_dlerror ());
+@end example
+@end deftypefun
+
+@deftypefun int lt_dlloader_remove (@w{const char *@var{loader_name}})
+Remove the loader identified by the unique name, @var{loader_name}.
+Before this can succeed, all modules opened by the named loader must
+have been closed.  Returns 0 for success, otherwise an error message can
+be obtained from @code{lt_dlerror}.
+
+@example
+/* Remove myloader. */
+if (lt_dlloader_remove ("myloader") != 0)
+  perror (lt_dlerror ());
+@end example
+@end deftypefun
+
+@deftypefun {lt_dlloader *} lt_dlloader_next (@w{lt_dlloader *@var{place}})
+Iterate over the module loaders, returning the first loader if @var{place} is
+@code{NULL}, and the next one on subsequent calls.  The handle is for use with
+@code{lt_dlloader_add}.
+
+@example
+/* Make myloader be the first one. */
+if (lt_dlloader_add (lt_dlloader_next (NULL), myloader) != 0)
+  return ERROR;
+@end example
+@end deftypefun
+
+@deftypefun {lt_dlloader *} lt_dlloader_find (@w{const char *@var{loader_name}})
+Return the first loader with a matching @var{loader_name} identifier, or else
+@code{NULL}, if the identifier is not found.
+
+The identifiers that may be used by libltdl itself, if the host
+architecture supports them are @dfn{dlopen}@footnote{This is used for
+the host dependent module loading API -- @code{shl_load} and
+@code{LoadLibrary} for example}, @dfn{dld} and @dfn{dlpreload}.
+
+@example
+/* Add a user loader as the next module loader to be tried if
+   the standard dlopen loader were to fail when lt_dlopening. */
+if (lt_dlloader_add (lt_dlloader_find ("dlopen"), myloader) != 0)
+  return ERROR;
+@end example
+@end deftypefun
+
+@deftypefun {const char *} lt_dlloader_name (@w{lt_dlloader *@var{place}})
+Return the identifying name of @var{place}, as obtained from
+@code{lt_dlloader_next} or @code{lt_dlloader_find}.  If this function fails,
+it will return @code{NULL} and set an error for retrieval with
+@code{lt_dlerror}.
+@end deftypefun
+
+@deftypefun {lt_user_data *} lt_dlloader_data (@w{lt_dlloader *@var{place}})
+Return the address of the @code{dlloader_data} of @var{place}, as
+obtained from @code{lt_dlloader_next} or @code{lt_dlloader_find}.  If
+this function fails, it will return @code{NULL} and set an error for
+retrieval with @code{lt_dlerror}.
+@end deftypefun
+
+@subsection Error handling within user module loaders
+
+@deftypefun int lt_dladderror (@w{const char *@var{diagnostic}})
+This function allows you to integrate your own error messages into
+@code{lt_dlerror}.  Pass in a suitable diagnostic message for return by
+@code{lt_dlerror}, and an error identifier for use with
+@code{lt_dlseterror} is returned.
+
+If the allocation of an identifier fails, this function returns -1.
+
+@example
+int myerror = lt_dladderror ("Doh!");
+if (myerror < 0)
+  perror (lt_dlerror ());
+@end example
+@end deftypefun
+
+@deftypefun int lt_dlseterror (@w{int @var{errorcode}})
+When writing your own module loaders, you should use this function to
+raise errors so that they are propagated through the @code{lt_dlerror}
+interface.  All of the standard errors used by libltdl are declared in
+@file{ltdl.h}, or you can add more of your own with
+@code{lt_dladderror}.  This function returns 0 on success.
+
+@example
+if (lt_dlseterror (LTDL_ERROR_NO_MEMORY) != 0)
+  perror (lt_dlerror ());
+@end example
+@end deftypefun
+
+@node Distributing libltdl
+@section How to distribute libltdl with your package
+
+Even though libltdl is installed together with libtool, you may wish
+to include libltdl in the distribution of your package, for the
+convenience of users of your package that don't have libtool or
+libltdl installed, or if you are using features of a very new version
+of libltdl that you don't expect your users to have yet.  In such
+cases, you must decide which flavor of libltdl you want to use: a
+convenience library or an installable libtool library.
+
+The most simplistic way to add @code{libltdl} to your package is to
+copy all the @file{libltdl} source files to a subdirectory within
+your package and to build and link them along with the rest of your
+sources.  To help you do this, the m4 macros for Autoconf are
+available in @file{ltdl.m4}.  You must ensure that they are available
+in @file{aclocal.m4} before you run Autoconf@footnote{@c
+@c
+We used to recommend adding the contents of @file{ltdl.m4} to
+@file{acinclude.m4}, but with @command{aclocal} from a modern
+Automake (1.8 or newer) and this release of libltdl that is not only
+unnecessary but makes it easy to forget to upgrade @file{acinclude.m4}
+if you move to a different release of libltdl.
+@c
+}.  Having made the macros available, you must add a call to the
+@samp{LTDL_INIT} macro (after the call to @samp{LT_INIT})
+to your package's @file{configure.ac} to
+perform the configure time checks required to build the library
+correctly.  Unfortunately, this method has problems if you then try to
+link the package binaries with an installed libltdl, or a library that
+depends on libltdl, because of the duplicate symbol definitions.  For
+example, ultimately linking against two different versions of libltdl,
+or against both a local convenience library and an installed libltdl
+is bad.  Ensuring that only one copy of the libltdl sources are linked
+into any program is left as an exercise for the reader.
+
+@defmac LT_CONFIG_LTDL_DIR (@var{directory})
+Declare @var{directory} to be the location of the @code{libltdl}
+source files, for @command{libtoolize --ltdl} to place
+them. @xref{Invoking libtoolize}, for more details.  Provided that you
+add an appropriate @code{LT_CONFIG_LTDL_DIR} call in your
+@file{configure.ac} before calling @command{libtoolize}, the
+appropriate @code{libltdl} files will be installed automatically.
+@end defmac
+
+@defmac LTDL_INIT (@var{options})
+@defmacx LT_WITH_LTDL
+@defmacx AC_WITH_LTDL
+@code{AC_WITH_LTDL} and @code{LT_WITH_LTDL} are deprecated names for
+older versions of this macro; @command{autoupdate} will update your
+@file{configure.ac} file.
+
+This macro adds the following options to the @command{configure}
+script:
+
+@table @option
+@item --with-ltdl-include @var{installed-ltdl-header-dir}
+The @code{LTDL_INIT} macro will look in the standard header file
+locations to find the installed @code{libltdl} headers.  If
+@code{LTDL_INIT} can't find them by itself, the person who builds
+your package can use this option to tell @command{configure} where
+the installed @code{libltdl} headers are.
+
+@item --with-ltdl-lib @var{installed-ltdl-library-dir}
+Similarly, the person building your package can use this option to
+help @command{configure} find the installed @file{libltdl.la}.
+
+@item --with-included-ltdl
+If there is no installed @code{libltdl}, or in any case if the
+person building your package would rather use the @code{libltdl}
+sources shipped with the package in the subdirectory named by
+@code{LT_CONFIG_LTDL_DIR}, they should pass this option to
+@command{configure}.
+@end table
+
+If the @option{--with-included-ltdl} is not passed at
+configure time, and an installed @code{libltdl} is not
+found@footnote{@c
+@c
+Even if libltdl is installed, @samp{LTDL_INIT} may fail
+to detect it if libltdl depends on symbols provided by libraries
+other than the C library.
+@c
+}, then @command{configure} will exit immediately with an error that
+asks the user to either specify the location of an installed
+@code{libltdl} using the @option{--with-ltdl-include} and
+@option{--with-ltdl-lib} options, or to build with the
+@code{libltdl} sources shipped with the package by passing
+@option{--with-included-ltdl}.
+
+If an installed @code{libltdl} is found, then @code{LIBLTDL} is set to
+the link flags needed to use it, and @code{LTDLINCL} to the preprocessor
+flags needed to find the installed headers, and @code{LTDLDEPS} will
+be empty.  Note, however, that no version checking is performed.  You
+should manually check for the @code{libltdl} features you need in
+@file{configure.ac}:
+
+@example
+LT_INIT([dlopen])
+LTDL_INIT
+
+# The lt_dladvise_init symbol was added with libtool-2.2
+if test "x$with_included_ltdl" != "xyes"; then
+  save_CFLAGS="$CFLAGS"
+  save_LDFLAGS="$LDFLAGS"
+  CFLAGS="$CFLAGS $LTDLINCL"
+  LDFLAGS="$LDFLAGS $LIBLTDL"
+  AC_CHECK_LIB([ltdl], [lt_dladvise_init],
+                [],
+        [AC_MSG_ERROR([installed libltdl is too old])])
+  LDFLAGS="$save_LDFLAGS"
+  CFLAGS="$save_CFLAGS"
+fi
+@end example
+
+@var{options} may include no more than one of the following build
+modes depending on how you want your project to build @code{libltdl}:
+@samp{nonrecursive}, @samp{recursive}, or @samp{subproject}.  In order
+for @command{libtoolize} to detect this option correctly, if you
+supply one of these arguments, they must be given literally (i.e.,
+macros or shell variables that expand to the correct ltdl mode will not
+work).
+
+@table @samp
+@item nonrecursive
+This is how the Libtool project distribution builds the @code{libltdl}
+we ship and install.  If you wish to use Automake to build
+@code{libltdl} without invoking a recursive make to descend into the
+@code{libltdl} subdirectory, then use this option.  You will need to set
+your configuration up carefully to make this work properly, and you will
+need releases of Autoconf and Automake that support
+@code{subdir-objects} and @code{LIBOBJDIR} properly.  In your
+@file{configure.ac}, add:
+
+@example
+AM_INIT_AUTOMAKE([subdir-objects])
+AC_CONFIG_HEADERS([config.h])
+LT_CONFIG_LTDL_DIR([libltdl])
+LT_INIT([dlopen])
+LTDL_INIT([nonrecursive])
+@end example
+
+@noindent
+You @emph{have to} use a config header, but it may have a name different
+than @file{config.h}.
+
+Also, add the following near the top of your @file{Makefile.am}:
+
+@example
+AM_CPPFLAGS =
+AM_LDFLAGS =
+
+BUILT_SOURCES =
+EXTRA_DIST =
+CLEANFILES =
+MOSTLYCLEANFILES =
+
+include_HEADERS =
+noinst_LTLIBRARIES =
+lib_LTLIBRARIES =
+EXTRA_LTLIBRARIES =
+
+include libltdl/Makefile.inc
+@end example
+
+@noindent
+Unless you build no other libraries from this @file{Makefile.am},
+you will also need to change @code{lib_LTLIBRARIES} to assign with
+@samp{+=} so that the @code{libltdl} targets declared in
+@file{Makefile.inc} are not overwritten.
+
+@item recursive
+This build mode still requires that you use Automake, but (in contrast
+with @samp{nonrecursive}) uses the more usual device of starting another
+@code{make} process in the @file{libltdl} subdirectory.  To use this
+mode, you should add to your @file{configure.ac}:
+
+@example
+AM_INIT_AUTOMAKE
+AC_CONFIG_HEADERS([config.h])
+LT_CONFIG_LTDL_DIR([libltdl])
+LT_INIT([dlopen])
+LTDL_INIT([recursive])
+AC_CONFIG_FILES([libltdl/Makefile])
+@end example
+
+@noindent
+Again, you @emph{have to} use a config header, but it may have a name
+different than @file{config.h} if you like.
+
+Also, add this to your @file{Makefile.am}:
+
+@example
+SUBDIRS = libltdl
+@end example
+
+@item subproject
+This mode is the default unless you explicitly add @code{recursive} or
+@code{nonrecursive} to your @code{LTDL_INIT} options;  @code{subproject}
+is the only mode supported by previous releases of libltdl.  Even if you
+do not use Autoconf in the parent project, then, in @samp{subproject}
+mode, still @code{libltdl} contains all the necessary files to configure
+and build itself -- you just need to arrange for your build system to
+call @file{libltdl/configure} with appropriate options, and then run
+@code{make} in the @code{libltdl} subdirectory.
+
+If you @emph{are} using Autoconf and Automake, then you will need to add
+the following to your @file{configure.ac}:
+
+@example
+LT_CONFIG_LTDL_DIR([libltdl])
+LTDL_INIT
+@end example
+
+@noindent
+and to @file{Makefile.am}:
+
+@example
+SUBDIRS = libltdl
+@end example
+@end table
+
+Aside from setting the libltdl build mode, there are other keywords
+that you can pass to @code{LTDL_INIT} to modify its behavior when
+@option{--with-included-ltdl} has been given:
+
+@table @samp
+@item convenience
+This is the default unless you explicitly add @code{installable} to
+your @code{LTDL_INIT} options.
+
+This keyword will cause options to be passed to the @command{configure}
+script in the subdirectory named by @code{LT_CONFIG_LTDL_DIR} in order
+to cause it to be built as a convenience library.  If you're not
+using automake, you will need to define @code{top_build_prefix},
+@code{top_builddir}, and @code{top_srcdir} in your makefile so that
+@code{LIBLTDL}, @code{LTDLDEPS}, and @code{LTDLINCL} expand correctly.
+
+One advantage of the convenience library is that it is not installed,
+so the fact that you use @code{libltdl} will not be apparent to the
+user, and it won't overwrite a pre-installed version of
+@code{libltdl} the system might already have in the installation
+directory.  On the other hand, if you want to upgrade @code{libltdl}
+for any reason (e.g.@: a bugfix) you'll have to recompile your package
+instead of just replacing the shared installed version of
+@code{libltdl}.  However, if your programs or libraries are linked
+with other libraries that use such a pre-installed version of
+@code{libltdl}, you may get linker errors or run-time crashes.
+Another problem is that you cannot link the convenience library into
+more than one libtool library, then link a single program with those
+libraries, because you may get duplicate symbols.  In general you can
+safely use the convenience library in programs that don't depend on
+other libraries that might use @code{libltdl} too.
+
+@item installable
+This keyword will pass options to the @command{configure}
+script in the subdirectory named by @code{LT_CONFIG_LTDL_DIR} in order
+to cause it to be built as an installable library.  If you're not
+using automake, you will need to define @code{top_build_prefix},
+@code{top_builddir} and @code{top_srcdir} in your makefile so that
+@code{LIBLTDL}, @code{LTDLDEPS}, and @code{LTDLINCL} are expanded
+properly.
+
+Be aware that you could overwrite another @code{libltdl} already
+installed to the same directory if you use this option.
+@end table
+@end defmac
+
+Whatever method you use, @samp{LTDL_INIT} will define the shell variable
+@code{LIBLTDL} to the link flag that you should use to link with
+@code{libltdl}, the shell variable @code{LTDLDEPS} to the files that
+can be used as a dependency in @file{Makefile} rules, and the shell
+variable @code{LTDLINCL} to the preprocessor flag that you should use to
+compile programs that include @file{ltdl.h}. So, when you want to link a
+program with libltdl, be it a convenience, installed or installable
+library, just use @samp{$(LTDLINCL)} for preprocessing and compilation,
+and @samp{$(LIBLTDL)} for linking.
+
+@itemize @bullet
+@item
+If your package is built using an installed version of @code{libltdl},
+@code{LIBLTDL} will be set to the compiler flags needed to link against
+the installed library, @code{LTDLDEPS} will be empty, and @code{LTDLINCL}
+will be set to the compiler flags needed to find the @code{libltdl}
+header files.
+
+@item
+If your package is built using the convenience libltdl, @code{LIBLTDL}
+and @code{LTDLDEPS} will be the pathname for the convenience version of
+libltdl (starting with @samp{$@{top_builddir@}/} or
+@samp{$@{top_build_prefix@}}) and @code{LTDLINCL} will be @option{-I}
+followed by the directory that contains @file{ltdl.h} (starting with
+@samp{$@{top_srcdir@}/}).
+
+@item
+If an installable version of the included @code{libltdl} is being
+built, its pathname starting with @samp{$@{top_builddir@}/} or
+@samp{$@{top_build_prefix@}}, will be stored in @code{LIBLTDL} and
+@code{LTDLDEPS}, and @code{LTDLINCL} will be set just like in the case of
+convenience library.
+@end itemize
+
+You should probably also use the @samp{dlopen} option to @code{LT_INIT}
+in your @file{configure.ac}, otherwise libtool will assume no dlopening
+mechanism is supported, and revert to dlpreopening, which is probably not
+what you want.  Avoid using the @option{-static},
+@option{-static-libtool-libs}, or @option{-all-static}
+switches when linking programs with libltdl.  This will not work on
+all platforms, because the dlopening functions may not be available
+for static linking.
+
+The following example shows you how to embed an installable libltdl in
+your package.  In order to use the convenience variant, just replace the
+@code{LTDL_INIT} option @samp{installable} with @samp{convenience}.  We
+assume that libltdl was embedded using @samp{libtoolize --ltdl}.
+
+configure.ac:
+@example
+...
+# Name the subdirectory that contains libltdl sources
+LT_CONFIG_LTDL_DIR([libltdl])
+
+# Configure libtool with dlopen support if possible
+LT_INIT([dlopen])
+
+# Enable building of the installable libltdl library
+LTDL_INIT([installable])
+...
+@end example
+
+Makefile.am:
+@example
+...
+SUBDIRS = libltdl
+
+AM_CPPFLAGS = $(LTDLINCL)
+
+myprog_LDFLAGS = -export-dynamic
+myprog_LDADD = $(LIBLTDL) -dlopen self -dlopen foo1.la
+myprog_DEPENDENCIES = $(LTDLDEPS) foo1.la
+...
+@end example
+
+@defmac LTDL_INSTALLABLE
+@defmacx AC_LIBLTDL_INSTALLABLE
+These macros are deprecated, the @samp{installable} option to
+@code{LTDL_INIT} should be used instead.
+@end defmac
+
+@defmac LTDL_CONVENIENCE
+@defmacx AC_LIBLTDL_CONVENIENCE
+These macros are deprecated, the @samp{convenience} option to
+@code{LTDL_INIT} should be used instead.
+@end defmac
+
+
+@node Trace interface
+@chapter Libtool's trace interface
+@cindex trace interface
+@cindex autoconf traces
+
+This section describes macros whose sole purpose is to be traced using
+Autoconf's @option{--trace} option (@pxref{autoconf Invocation, , The
+Autoconf Manual, autoconf, The Autoconf Manual}) to query the Libtool
+configuration of a project.  These macros are called by Libtool
+internals and should never be called by user code; they should only be
+traced.
+
+@defmac LT_SUPPORTED_TAG (@var{tag})
+This macro is called once for each language enabled in the package.  Its
+only argument, @var{tag}, is the tag-name corresponding to the language
+(@pxref{Tags}).
+
+You can therefore retrieve the list of all tags enabled in a project
+using the following command:
+@example
+autoconf --trace 'LT_SUPPORTED_TAG:$1'
+@end example
+@end defmac
+
+
+@node FAQ
+@chapter Frequently Asked Questions about libtool
+
+This chapter covers some questions that often come up on the mailing
+lists.
+
+@menu
+* Stripped link flags::         Dropped flags when creating a library
+@end menu
+
+@node Stripped link flags
+@section Why does libtool strip link flags when creating a library?
+
+When creating a shared library, but not when compiling or creating
+a program, @command{libtool} drops some flags from the command line
+provided by the user.  This is done because flags unknown to
+@command{libtool} may interfere with library creation or require
+additional support from @command{libtool}, and because omitting
+flags is usually the conservative choice for a successful build.
+
+If you encounter flags that you think are useful to pass, as a
+work-around you can prepend flags with @code{-Wc,} or @code{-Xcompiler }
+to allow them to be passed through to the compiler driver
+(@pxref{Link mode}).  Another possibility is to add flags already
+to the compiler command at @command{configure} run time:
+
+@example
+./configure CC='gcc -m64'
+@end example
+
+If you think @command{libtool} should let some flag through by default,
+here's how you can test such an inclusion: grab the Libtool development
+tree, edit the @file{ltmain.m4sh} file in the @file{libltdl/config}
+subdirectory to pass through the flag (search for @samp{Flags to be
+passed through}), re-bootstrap and build with the flags in question
+added to @code{LDFLAGS}, @code{CFLAGS}, @code{CXXFLAGS}, etc. on the
+@command{configure} command line as appropriate.  Run the testsuite
+as described in the @file{README} file and report results to
+@value{BUGADDR}.
+
+@node Troubleshooting
+@chapter Troubleshooting
+@cindex troubleshooting
+@cindex problems, solving
+@cindex solving problems
+@cindex problems, blaming somebody else for
+
+Libtool is under constant development, changing to remain up-to-date
+with modern operating systems.  If libtool doesn't work the way you
+think it should on your platform, you should read this chapter to help
+determine what the problem is, and how to resolve it.
+
+@menu
+* Libtool test suite::          Libtool's self-tests.
+* Reporting bugs::              How to report problems with libtool.
+@end menu
+
+@node Libtool test suite
+@section The libtool test suite
+@cindex test suite
+
+Libtool comes with two integrated sets of tests to check that your build
+is sane, that test its capabilities, and report obvious bugs in the
+libtool program.  These tests, too, are constantly evolving, based on
+past problems with libtool, and known deficiencies in other operating
+systems.
+
+As described in the @file{README} file, you may run @kbd{make -k check}
+after you have built libtool (possibly before you install it) in order
+to make sure that it meets basic functional requirements.
+
+@menu
+* Test descriptions::           The contents of the old test suite.
+* When tests fail::             What to do when a test fails.
+@end menu
+
+@node Test descriptions
+@subsection Description of test suite
+
+Here is a list of the current programs in the old test suite, and what
+they test for:
+
+@table @file
+
+@item cdemo-conf.test
+@itemx cdemo-make.test
+@itemx cdemo-exec.test
+@itemx cdemo-static.test
+@itemx cdemo-static-make.test
+@itemx cdemo-static-exec.test
+@itemx cdemo-shared.test
+@itemx cdemo-shared-make.test
+@itemx cdemo-shared-exec.test
+@itemx cdemo-undef.test
+@itemx cdemo-undef-make.test
+@itemx cdemo-undef-exec.test
+@pindex cdemo-conf.test
+@pindex cdemo-make.test
+@pindex cdemo-exec.test
+@pindex cdemo-static.test
+@pindex cdemo-static-make.test
+@pindex cdemo-static-exec.test
+@pindex cdemo-shared.test
+@pindex cdemo-shared-make.test
+@pindex cdemo-shared-exec.test
+@pindex cdemo-undef.test
+@pindex cdemo-undef-make.test
+@pindex cdemo-undef-exec.test
+These programs check to see that the @file{tests/cdemo} subdirectory of
+the libtool distribution can be configured and built correctly.
+
+The @file{tests/cdemo} subdirectory contains a demonstration of libtool
+convenience libraries, a mechanism that allows build-time static
+libraries to be created, in a way that their components can be later
+linked into programs or other libraries, even shared ones.
+
+The tests matching @file{cdemo-*make.test} and @file{cdemo-*exec.test}
+are executed three times, under three different libtool configurations:
+@file{cdemo-conf.test} configures @file{cdemo/libtool} to build both
+static and shared libraries (the default for platforms that support
+both), @file{cdemo-static.test} builds only static libraries
+(@samp{--disable-shared}), and @file{cdemo-shared.test} builds only
+shared libraries (@samp{--disable-static}).
+
+The test @file{cdemo-undef.test} tests the generation of shared
+libraries with undefined symbols on systems that allow this.
+
+@item demo-conf.test
+@itemx demo-make.test
+@itemx demo-exec.test
+@itemx demo-inst.test
+@itemx demo-unst.test
+@itemx demo-static.test
+@itemx demo-static-make.test
+@itemx demo-static-exec.test
+@itemx demo-static-inst.test
+@itemx demo-static-unst.test
+@itemx demo-shared.test
+@itemx demo-shared-make.test
+@itemx demo-shared-exec.test
+@itemx demo-shared-inst.test
+@itemx demo-shared-unst.test
+@itemx demo-nofast.test
+@itemx demo-nofast-make.test
+@itemx demo-nofast-exec.test
+@itemx demo-nofast-inst.test
+@itemx demo-nofast-unst.test
+@itemx demo-pic.test
+@itemx demo-pic-make.test
+@itemx demo-pic-exec.test
+@itemx demo-nopic.test
+@itemx demo-nopic-make.test
+@itemx demo-nopic-exec.test
+@pindex demo-conf.test
+@pindex demo-make.test
+@pindex demo-exec.test
+@pindex demo-inst.test
+@pindex demo-unst.test
+@pindex demo-static.test
+@pindex demo-static-make.test
+@pindex demo-static-exec.test
+@pindex demo-static-inst.test
+@pindex demo-static-unst.test
+@pindex demo-shared.test
+@pindex demo-shared-make.test
+@pindex demo-shared-exec.test
+@pindex demo-shared-inst.test
+@pindex demo-shared-unst.test
+@pindex demo-nofast.test
+@pindex demo-nofast-make.test
+@pindex demo-nofast-exec.test
+@pindex demo-nofast-inst.test
+@pindex demo-nofast-unst.test
+@pindex demo-pic.test
+@pindex demo-pic-make.test
+@pindex demo-pic-exec.test
+@pindex demo-nopic.test
+@pindex demo-nopic-make.test
+@pindex demo-nopic-exec.test
+These programs check to see that the @file{tests/demo} subdirectory of
+the libtool distribution can be configured, built, installed, and
+uninstalled correctly.
+
+The @file{tests/demo} subdirectory contains a demonstration of a trivial
+package that uses libtool.  The tests matching @file{demo-*make.test},
+@file{demo-*exec.test}, @file{demo-*inst.test} and
+@file{demo-*unst.test} are executed four times, under four different
+libtool configurations: @file{demo-conf.test} configures
+@file{demo/libtool} to build both static and shared libraries,
+@file{demo-static.test} builds only static libraries
+(@option{--disable-shared}), and @file{demo-shared.test} builds only
+shared libraries (@option{--disable-static}).
+@file{demo-nofast.test} configures @file{demo/libtool} to
+disable the fast-install mode (@option{--enable-fast-install=no}).
+@file{demo-pic.test} configures @file{demo/libtool} to
+prefer building PIC code (@option{--with-pic}), @file{demo-nopic.test}
+to prefer non-PIC code (@option{--without-pic}).
+
+@item demo-deplibs.test
+@pindex demo-deplibs.test
+Many systems cannot link static libraries into shared libraries.
+libtool uses a @code{deplibs_check_method} to prevent such cases.
+This tests checks whether libtool's @code{deplibs_check_method}
+works properly.
+
+@item demo-hardcode.test
+@pindex demo-hardcode.test
+On all systems with shared libraries, the location of the library can be
+encoded in executables that are linked against it @pxref{Linking
+executables}.  This test checks the conditions under which your system
+linker hardcodes the library location, and guarantees that they
+correspond to libtool's own notion of how your linker behaves.
+
+@item demo-relink.test
+@itemx depdemo-relink.test
+@pindex demo-relink.test
+@pindex depdemo-relink.test
+These tests check whether variable @code{shlibpath_overrides_runpath} is
+properly set.  If the test fails, it will indicate what the variable should
+have been set to.
+
+@item demo-noinst-link.test
+@pindex demo-noinst-link.test
+Checks whether libtool will not try to link with a previously installed
+version of a library when it should be linking with a just-built one.
+
+@item depdemo-conf.test
+@itemx depdemo-make.test
+@itemx depdemo-exec.test
+@itemx depdemo-inst.test
+@itemx depdemo-unst.test
+@itemx depdemo-static.test
+@itemx depdemo-static-make.test
+@itemx depdemo-static-exec.test
+@itemx depdemo-static-inst.test
+@itemx depdemo-static-unst.test
+@itemx depdemo-shared.test
+@itemx depdemo-shared-make.test
+@itemx depdemo-shared-exec.test
+@itemx depdemo-shared-inst.test
+@itemx depdemo-shared-unst.test
+@itemx depdemo-nofast.test
+@itemx depdemo-nofast-make.test
+@itemx depdemo-nofast-exec.test
+@itemx depdemo-nofast-inst.test
+@itemx depdemo-nofast-unst.test
+@pindex depdemo-conf.test
+@pindex depdemo-make.test
+@pindex depdemo-exec.test
+@pindex depdemo-inst.test
+@pindex depdemo-unst.test
+@pindex depdemo-static.test
+@pindex depdemo-static-make.test
+@pindex depdemo-static-exec.test
+@pindex depdemo-static-inst.test
+@pindex depdemo-static-unst.test
+@pindex depdemo-shared.test
+@pindex depdemo-shared-make.test
+@pindex depdemo-shared-exec.test
+@pindex depdemo-shared-inst.test
+@pindex depdemo-shared-unst.test
+@pindex depdemo-nofast.test
+@pindex depdemo-nofast-make.test
+@pindex depdemo-nofast-exec.test
+@pindex depdemo-nofast-inst.test
+@pindex depdemo-nofast-unst.test
+These programs check to see that the @file{tests/depdemo} subdirectory
+of the libtool distribution can be configured, built, installed, and
+uninstalled correctly.
+
+The @file{tests/depdemo} subdirectory contains a demonstration of
+inter-library dependencies with libtool.  The test programs link some
+interdependent libraries.
+
+The tests matching @file{depdemo-*make.test}, @file{depdemo-*exec.test},
+@file{depdemo-*inst.test} and @file{depdemo-*unst.test} are executed
+four times, under four different libtool configurations:
+@file{depdemo-conf.test} configures @file{depdemo/libtool} to build both
+static and shared libraries, @file{depdemo-static.test} builds only static
+libraries (@option{--disable-shared}), and @file{depdemo-shared.test} builds
+only shared libraries (@option{--disable-static}).
+@file{depdemo-nofast.test} configures @file{depdemo/libtool} to
+disable the fast-install mode (@option{--enable-fast-install=no}).
+
+@item mdemo-conf.test
+@itemx mdemo-make.test
+@itemx mdemo-exec.test
+@itemx mdemo-inst.test
+@itemx mdemo-unst.test
+@itemx mdemo-static.test
+@itemx mdemo-static-make.test
+@itemx mdemo-static-exec.test
+@itemx mdemo-static-inst.test
+@itemx mdemo-static-unst.test
+@itemx mdemo-shared.test
+@itemx mdemo-shared-make.test
+@itemx mdemo-shared-exec.test
+@itemx mdemo-shared-inst.test
+@itemx mdemo-shared-unst.test
+@pindex mdemo-conf.test
+@pindex mdemo-make.test
+@pindex mdemo-exec.test
+@pindex mdemo-inst.test
+@pindex mdemo-unst.test
+@pindex mdemo-static.test
+@pindex mdemo-static-make.test
+@pindex mdemo-static-exec.test
+@pindex mdemo-static-inst.test
+@pindex mdemo-static-unst.test
+@pindex mdemo-shared.test
+@pindex mdemo-shared-make.test
+@pindex mdemo-shared-exec.test
+@pindex mdemo-shared-inst.test
+@pindex mdemo-shared-unst.test
+These programs check to see that the @file{tests/mdemo} subdirectory of
+the libtool distribution can be configured, built, installed, and
+uninstalled correctly.
+
+The @file{tests/mdemo} subdirectory contains a demonstration of a
+package that uses libtool and the system independent dlopen wrapper
+@file{libltdl} to load modules.  The library @file{libltdl} provides a
+dlopen wrapper for various platforms (POSIX)
+including support for dlpreopened modules (@pxref{Dlpreopening}).
+
+The tests matching @file{mdemo-*make.test}, @file{mdemo-*exec.test},
+@file{mdemo-*inst.test} and @file{mdemo-*unst.test} are executed
+three times, under three different libtool configurations:
+@file{mdemo-conf.test} configures @file{mdemo/libtool} to build both
+static and shared libraries, @file{mdemo-static.test} builds only static
+libraries (@option{--disable-shared}), and @file{mdemo-shared.test} builds
+only shared libraries (@option{--disable-static}).
+
+@item mdemo-dryrun.test
+@pindex mdemo-dryrun.test
+This test checks whether libtool's @option{--dry-run} mode works properly.
+
+@item mdemo2-conf.test
+@itemx mdemo2-exec.test
+@itemx mdemo2-make.test
+@pindex mdemo2-conf.test
+@pindex mdemo2-exec.test
+@pindex mdemo2-make.test
+These programs check to see that the @file{tests/mdemo2} subdirectory of
+the libtool distribution can be configured, built, and executed
+correctly.
+
+The @file{tests/mdemo2} directory contains a demonstration of a package
+that attempts to link with a library (from the @file{tests/mdemo}
+directory) that itself does dlopening of libtool modules.
+
+@item link.test
+@pindex link.test
+This test guarantees that linking directly against a non-libtool static
+library works properly.
+
+@item link-2.test
+@pindex link-2.test
+This test makes sure that files ending in @file{.lo} are never linked
+directly into a program file.
+
+@item nomode.test
+@pindex nomode.test
+Check whether we can actually get help for libtool.
+
+@item objectlist.test
+@pindex objectlist.test
+Check that a nonexistent objectlist file is properly detected.
+
+@item pdemo-conf.test
+@itemx pdemo-make.test
+@itemx pdemo-exec.test
+@itemx pdemo-inst.test
+@pindex pdemo-conf.test
+@pindex pdemo-make.test
+@pindex pdemo-exec.test
+@pindex pdemo-inst.test
+These programs check to see that the @file{tests/pdemo} subdirectory of
+the libtool distribution can be configured, built, and executed
+correctly.
+
+The @file{pdemo-conf.test} lowers the @code{max_cmd_len} variable in the
+generated libtool script to test the measures to evade command line
+length limitations.
+
+@item quote.test
+@pindex quote.test
+This program checks libtool's metacharacter quoting.
+
+@item sh.test
+@pindex sh.test
+Checks for some nonportable or dubious or undesired shell constructs in
+shell scripts.
+
+@item suffix.test
+@pindex suffix.test
+When other programming languages are used with libtool (@pxref{Other
+languages}), the source files may end in suffixes other than @file{.c}.
+This test validates that libtool can handle suffixes for all the file
+types that it supports, and that it fails when the suffix is invalid.
+
+@item tagdemo-conf.test
+@itemx tagdemo-make.test
+@itemx tagdemo-exec.test
+@itemx tagdemo-static.test
+@itemx tagdemo-static-make.test
+@itemx tagdemo-static-exec.test
+@itemx tagdemo-shared.test
+@itemx tagdemo-shared-make.test
+@itemx tagdemo-shared-exec.test
+@itemx tagdemo-undef.test
+@itemx tagdemo-undef-make.test
+@itemx tagdemo-undef-exec.test
+@pindex tagdemo-conf.test
+@pindex tagdemo-make.test
+@pindex tagdemo-exec.test
+@pindex tagdemo-static.test
+@pindex tagdemo-static-make.test
+@pindex tagdemo-static-exec.test
+@pindex tagdemo-shared.test
+@pindex tagdemo-shared-make.test
+@pindex tagdemo-shared-exec.test
+@pindex tagdemo-undef.test
+@pindex tagdemo-undef-make.test
+@pindex tagdemo-undef-exec.test
+These programs check to see that the @file{tests/tagdemo} subdirectory
+of the libtool distribution can be configured, built, and executed
+correctly.
+
+The @file{tests/tagdemo} directory contains a demonstration of a package
+that uses libtool's multi-language support through configuration tags.
+It generates a library from C++ sources, which is then linked to a C++
+program.
+
+@item f77demo-conf.test
+@itemx f77demo-make.test
+@itemx f77demo-exec.test
+@itemx f77demo-static.test
+@itemx f77demo-static-make.test
+@itemx f77demo-static-exec.test
+@itemx f77demo-shared.test
+@itemx f77demo-shared-make.test
+@itemx f77demo-shared-exec.test
+@pindex f77demo-conf.test
+@pindex f77demo-make.test
+@pindex f77demo-exec.test
+@pindex f77demo-static.test
+@pindex f77demo-static-make.test
+@pindex f77demo-static-exec.test
+@pindex f77demo-shared.test
+@pindex f77demo-shared-make.test
+@pindex f77demo-shared-exec.test
+These programs check to see that the @file{tests/f77demo} subdirectory
+of the libtool distribution can be configured, built, and executed
+correctly.
+
+The @file{tests/f77demo} tests test Fortran 77 support in libtool by
+creating libraries from Fortran 77 sources, and mixed Fortran and C
+sources, and a Fortran 77 program to use the former library, and a C
+program to use the latter library.
+
+@item fcdemo-conf.test
+@itemx fcdemo-make.test
+@itemx fcdemo-exec.test
+@itemx fcdemo-static.test
+@itemx fcdemo-static-make.test
+@itemx fcdemo-static-exec.test
+@itemx fcdemo-shared.test
+@itemx fcdemo-shared-make.test
+@itemx fcdemo-shared-exec.test
+@pindex fcdemo-conf.test
+@pindex fcdemo-make.test
+@pindex fcdemo-exec.test
+@pindex fcdemo-static.test
+@pindex fcdemo-static-make.test
+@pindex fcdemo-static-exec.test
+@pindex fcdemo-shared.test
+@pindex fcdemo-shared-make.test
+@pindex fcdemo-shared-exec.test
+These programs check to see that the @file{tests/fcdemo} subdirectory
+of the libtool distribution can be configured, built, and executed
+correctly.
+
+The @file{tests/fcdemo} is similar to the @file{tests/f77demo}
+directory, except that Fortran 90 is used in combination with the
+@samp{FC} interface provided by Autoconf and Automake.
+
+@end table
+
+The new, Autotest-based test suite uses keywords to classify certain
+test groups:
+
+@table @samp
+@item CXX
+@itemx F77
+@itemx FC
+@itemx GCJ
+The test group exercises one of these @command{libtool} language tags.
+
+@item autoconf
+@itemx automake
+These keywords denote that the respective external program is needed
+by the test group.  The tests are typically skipped if the program is
+not installed.  The @samp{automake} keyword may also denote use of the
+@command{aclocal} program.
+
+@item interactive
+This test group may require user interaction on some systems.  Typically,
+this means closing a popup window about a DLL load error on Windows.
+
+@item libltdl
+Denote that the @file{libltdl} library is exercised by the test group.
+
+@item libtool
+@itemx libtoolize
+Denote that the @command{libtool} or @command{libtoolize} scripts are
+exercised by the test group, respectively.
+
+@item recursive
+Denote that this test group may recursively re-invoke the test suite
+itself, with changed settings and maybe a changed @command{libtool}
+script.  You may use the @env{INNER_TESTSUITEFLAGS} variable to pass
+additional settings to this recursive invocation.  Typically, recursive
+invocations delimit the set of tests with another keyword, for example
+by passing @code{-k libtool} right before the expansion of the
+@env{INNER_TESTSUITEFLAGS} variable (without an intervening space, so
+you get the chance for further delimitation).
+
+Test groups with the keyword @samp{recursive} should not be denoted with
+keywords, in order to avoid infinite recursion.  As a consequence,
+recursive test groups themselves should never require user interaction,
+while the test groups they invoke may do so.
+@end table
+
+@cindex @samp{check-interactive}
+@cindex @samp{check-noninteractive}
+There is a convenience target @samp{check-noninteractive} that runs
+all tests from both test suites that do not cause user interaction on
+Windows.  Conversely, the target @samp{check-interactive} runs the
+complement of tests and might require closing popup windows about DLL
+load errors on Windows.
+
+
+@node When tests fail
+@subsection When tests fail
+@cindex failed tests
+@cindex tests, failed
+
+When the tests in the old test suite are run via @command{make check},
+output is caught in per-test @file{tests/@var{test-name}.log} files
+and summarized in the @file{test-suite.log} file.  The exit status of each
+program tells the @file{Makefile} whether or not the test succeeded.
+
+If a test fails, it means that there is either a programming error in
+libtool, or in the test program itself.
+
+To investigate a particular test, you may run it directly, as you would
+a normal program.  When the test is invoked in this way, it produces
+output that may be useful in determining what the problem is.
+
+The new, Autotest-based test suite produces as output a file
+@file{tests/testsuite.log} which contains information about failed
+tests.
+
+You can pass options to the test suite through the @command{make}
+variable @env{TESTSUITEFLAGS} (@pxref{testsuite Invocation, ,
+The Autoconf Manual, autoconf, The Autoconf Manual}).
+
+
+@node Reporting bugs
+@section Reporting bugs
+@cindex bug reports
+@cindex reporting bugs
+@cindex problem reports
+
+If you think you have discovered a bug in libtool, you should think
+twice: the libtool maintainer is notorious for passing the buck (or
+maybe that should be ``passing the bug'').  Libtool was invented to fix
+known deficiencies in shared library implementations, so, in a way, most
+of the bugs in libtool are actually bugs in other operating systems.
+However, the libtool maintainer would definitely be happy to add support
+for somebody else's buggy operating system.  [I wish there was a good
+way to do winking smiley-faces in Texinfo.]
+
+Genuine bugs in libtool include problems with shell script portability,
+documentation errors, and failures in the test suite (@pxref{Libtool
+test suite}).
+
+First, check the documentation and help screens to make sure that the
+behaviour you think is a problem is not already mentioned as a feature.
+
+Then, you should read the Emacs guide to reporting bugs (@pxref{Bugs, ,
+Reporting Bugs, emacs, The Emacs Manual}).  Some of the details
+listed there are specific to Emacs, but the principle behind them is a
+general one.
+
+Finally, send a bug report to @value{BUGADDR} with any appropriate
+@emph{facts}, such as test suite output (@pxref{When tests fail}), all
+the details needed to reproduce the bug, and a brief description of why
+you think the behaviour is a bug.  Be sure to include the word
+``libtool'' in the subject line, as well as the version number you are
+using (which can be found by typing @kbd{libtool --version}).
+
+@node Maintaining
+@chapter Maintenance notes for libtool
+
+This chapter contains information that the libtool maintainer finds
+important.  It will be of no use to you unless you are considering
+porting libtool to new systems, or writing your own libtool.
+
+@menu
+* New ports::                   How to port libtool to new systems.
+* Tested platforms::            When libtool was last tested.
+* Platform quirks::             Information about different library systems.
+* libtool script contents::     Configuration information that libtool uses.
+* Cheap tricks::                Making libtool maintainership easier.
+@end menu
+
+@node New ports
+@section Porting libtool to new systems
+
+Before you embark on porting libtool to an unsupported system, it is
+worthwhile to send e-mail to @value{MAILLIST}, to make sure that you are
+not duplicating existing work.
+
+If you find that any porting documentation is missing, please complain!
+Complaints with patches and improvements to the documentation, or to
+libtool itself, are more than welcome.
+
+@menu
+* Information sources::         Where to find relevant documentation
+* Porting inter-library dependencies::  Implementation details explained
+@end menu
+
+@node Information sources
+@subsection Information sources
+
+Once it is clear that a new port is necessary, you'll generally need the
+following information:
+
+@table @asis
+@item canonical system name
+You need the output of @code{config.guess} for this system, so that you
+can make changes to the libtool configuration process without affecting
+other systems.
+
+@item man pages for @command{ld} and @command{cc}
+These generally describe what flags are used to generate PIC, to create
+shared libraries, and to link against only static libraries.  You may
+need to follow some cross references to find the information that is
+required.
+
+@item man pages for @command{ld.so}, @command{rtld}, or equivalent
+These are a valuable resource for understanding how shared libraries are
+loaded on the system.
+
+@item man page for @command{ldconfig}, or equivalent
+This page usually describes how to install shared libraries.
+
+@item output from @kbd{ls -l /lib /usr/lib}
+This shows the naming convention for shared libraries on the system,
+including which names should be symbolic links.
+
+@item any additional documentation
+Some systems have special documentation on how to build and install
+shared libraries.
+@end table
+
+If you know how to program the Bourne shell, then you can complete the
+port yourself; otherwise, you'll have to find somebody with the relevant
+skills who will do the work.  People on the libtool mailing list are
+usually willing to volunteer to help you with new ports, so you can send
+the information to them.
+
+To do the port yourself, you'll definitely need to modify the
+@code{libtool.m4} macros in order to make platform-specific changes to
+the configuration process.  You should search that file for the
+@code{PORTME} keyword, which will give you some hints on what you'll
+need to change.  In general, all that is involved is modifying the
+appropriate configuration variables (@pxref{libtool script contents}).
+
+Your best bet is to find an already-supported system that is similar to
+yours, and make your changes based on that.  In some cases, however,
+your system will differ significantly from every other supported system,
+and it may be necessary to add new configuration variables, and modify
+the @code{ltmain.in} script accordingly.  Be sure to write to the
+mailing list before you make changes to @code{ltmain.in}, since they may
+have advice on the most effective way of accomplishing what you want.
+
+@node Porting inter-library dependencies
+@subsection Porting inter-library dependencies support
+@cindex inter-library dependency
+@vindex deplibs_check_method
+
+Since version 1.2c, libtool has re-introduced the ability to do
+inter-library dependency on some platforms, thanks to a patch by Toshio
+Kuratomi @email{badger@@prtr-13.ucsc.edu}.  Here's a shortened version
+of the message that contained his patch:
+
+The basic architecture is this: in @file{libtool.m4}, the person who
+writes libtool makes sure @samp{$deplibs} is included in
+@samp{$archive_cmds} somewhere and also sets the variable
+@samp{$deplibs_check_method}, and maybe @samp{$file_magic_cmd} when
+@samp{deplibs_check_method} is file_magic.
+
+@samp{deplibs_check_method} can be one of five things:
+@table @samp
+@item file_magic [@var{regex}]
+@vindex file_magic
+@vindex file_magic_cmd
+@vindex file_magic_test_file
+looks in the library link path for libraries that have the right
+libname.  Then it runs @samp{$file_magic_cmd} on the library and checks
+for a match against the extended regular expression @var{regex}.  When
+@code{file_magic_test_file} is set by @file{libtool.m4}, it is used as an
+argument to @samp{$file_magic_cmd} in order to verify whether the
+regular expression matches its output, and warn the user otherwise.
+
+@item test_compile
+@vindex test_compile
+just checks whether it is possible to link a program out of a list of
+libraries, and checks which of those are listed in the output of
+@code{ldd}.  It is currently unused, and will probably be dropped in the
+future.
+
+@item pass_all
+@vindex pass_all
+will pass everything without any checking.  This may work on platforms
+in which code is position-independent by default and inter-library
+dependencies are properly supported by the dynamic linker, for example,
+on DEC OSF/1 3 and 4.
+
+@item none
+@vindex none
+It causes deplibs to be reassigned @samp{deplibs=""}.  That way
+@samp{archive_cmds} can contain deplibs on all platforms, but not have
+deplibs used unless needed.
+
+@item unknown
+@vindex unknown
+is the default for all systems unless overridden in @file{libtool.m4}.
+It is the same as @samp{none}, but it documents that we really don't
+know what the correct value should be, and we welcome patches that
+improve it.
+@end table
+
+Then in @file{ltmain.in} we have the real workhorse: a little
+initialization and postprocessing (to setup/release variables for use
+with eval echo libname_spec etc.) and a case statement that decides
+the method that is being used.  This is the real code@dots{} I wish I could
+condense it a little more, but I don't think I can without function
+calls.  I've mostly optimized it (moved things out of loops, etc.) but
+there is probably some fat left.  I thought I should stop while I was
+ahead, work on whatever bugs you discover, etc.@: before thinking about
+more than obvious optimizations.
+
+@node Tested platforms
+@section Tested platforms
+
+This table describes when libtool was last known to be tested on
+platforms where it claims to support shared libraries:
+
+@example
+@include PLATFORMS
+@end example
+
+Note: The vendor-distributed HP-UX @command{sed}(1) programs are horribly
+broken, and cannot handle libtool's requirements, so users may report
+unusual problems.  There is no workaround except to install a working
+@command{sed} (such as GNU @command{sed}) on these systems.
+
+Note: The vendor-distributed NCR MP-RAS @command{cc} programs emits
+copyright on standard error that confuse tests on size of
+@file{conftest.err}.  The workaround is to specify @code{CC}
+when run @code{configure} with @kbd{CC='cc -Hnocopyr'}.
+
+@node Platform quirks
+@section Platform quirks
+
+This section is dedicated to the sanity of the libtool maintainers.  It
+describes the programs that libtool uses, how they vary from system to
+system, and how to test for them.
+
+Because libtool is a shell script, it can be difficult to understand
+just by reading it from top to bottom.  This section helps show why
+libtool does things a certain way.  Combined with the scripts
+themselves, you should have a better sense of how to improve libtool, or
+write your own.
+
+@menu
+* References::                  Finding more information.
+* Compilers::                   Creating object files from source files.
+* Reloadable objects::          Binding object files together.
+* Multiple dependencies::       Removing duplicate dependent libraries.
+* Archivers::                   Programs that create static archives.
+* Cross compiling::             Issues that arise when cross compiling.
+* File name conversion::        Converting file names between platforms.
+* Windows DLLs::                Windows header defines.
+@end menu
+
+@node References
+@subsection References
+
+The following is a list of valuable documentation references:
+
+@itemize @bullet
+@item
+SGI's IRIX Manual Pages can be found at@*
+@url{http://techpubs.sgi.com/cgi-bin/infosrch.cgi?cmd=browse&db=man}.
+
+@item
+Sun's free service area
+(@url{http://www.sun.com/service/online/free.html}) and documentation
+server (@url{http://docs.sun.com/}).
+
+@item
+Compaq's Tru64 UNIX online documentation is at@*
+(@url{http://tru64unix.compaq.com/faqs/publications/pub_page/doc_list.html})
+with C++ documentation at@*
+(@url{http://tru64unix.compaq.com/cplus/docs/index.htm}).
+
+@item
+Hewlett-Packard has online documentation at
+(@url{http://docs.hp.com/index.html}).
+
+@item
+IBM has online documentation at
+(@url{http://www.rs6000.ibm.com/resource/aix_resource/Pubs/}).
+@end itemize
+
+@node Compilers
+@subsection Compilers
+
+The only compiler characteristics that affect libtool are the flags
+needed (if any) to generate PIC objects.  In general, if a C compiler
+supports certain PIC flags, then any derivative compilers support the
+same flags.  Until there are some noteworthy exceptions to this rule,
+this section will document only C compilers.
+
+The following C compilers have standard command line options, regardless
+of the platform:
+
+@table @code
+@item gcc
+
+This is the GNU C compiler, which is also the system compiler for many
+free operating systems (FreeBSD, GNU/Hurd, GNU/Linux, Lites, NetBSD, and
+OpenBSD, to name a few).
+
+The @option{-fpic} or @option{-fPIC} flags can be used to generate
+position-independent code.  @option{-fPIC} is guaranteed to generate
+working code, but the code is slower on m68k, m88k, and Sparc chips.
+However, using @option{-fpic} on those chips imposes arbitrary size limits
+on the shared libraries.
+@end table
+
+The rest of this subsection lists compilers by the operating system that
+they are bundled with:
+
+@c FIXME these should all be better-documented
+
+@table @code
+@item aix3*
+@itemx aix4*
+Most AIX compilers have no PIC flags, since AIX (with the exception of
+AIX for IA-64) runs on PowerPC and RS/6000 chips. @footnote{All code compiled
+for the PowerPC and RS/6000 chips (@code{powerpc-*-*}, @code{powerpcle-*-*},
+and @code{rs6000-*-*}) is position-independent, regardless of the operating
+system or compiler suite.  So, ``regular objects'' can be used to build
+shared libraries on these systems and no special PIC compiler flags are
+required.}
+
+@item hpux10*
+Use @samp{+Z} to generate PIC.
+
+@item osf3*
+Digital/UNIX 3.x does not have PIC flags, at least not on the PowerPC
+platform.
+
+@item solaris2*
+Use @option{-KPIC} to generate PIC.
+
+@item sunos4*
+Use @option{-PIC} to generate PIC.
+@end table
+
+@node Reloadable objects
+@subsection Reloadable objects
+
+On all known systems, a reloadable object can be created by running
+@kbd{ld -r -o @var{output}.o @var{input1}.o @var{input2}.o}.  This
+reloadable object may be treated as exactly equivalent to other
+objects.
+
+@node Multiple dependencies
+@subsection Multiple dependencies
+
+On most modern platforms the order in which dependent libraries are listed
+has no effect on object generation.  In theory, there are platforms
+that require libraries that provide missing symbols to other libraries
+to be listed after those libraries whose symbols they provide.
+
+Particularly, if a pair of static archives each resolve some of the
+other's symbols, it might be necessary to list one of those archives
+both before and after the other one.  Libtool does not currently cope
+with this situation well, since duplicate libraries are removed from
+the link line by default.  Libtool provides the command line option
+@option{--preserve-dup-deps} to preserve all duplicate dependencies
+in cases where it is necessary.
+
+@node Archivers
+@subsection Archivers
+
+On all known systems, building a static library can be accomplished by
+running @kbd{ar cru lib@var{name}.a @var{obj1}.o @var{obj2}.o @dots{}},
+where the @file{.a} file is the output library, and each @file{.o} file is an
+object file.
+
+On all known systems, if there is a program named @command{ranlib}, then it
+must be used to ``bless'' the created library before linking against it,
+with the @kbd{ranlib lib@var{name}.a} command.  Some systems, like Irix,
+use the @code{ar ts} command, instead.
+
+@node Cross compiling
+@subsection Cross compiling
+@cindex cross compile
+
+Most build systems support the ability to compile libraries and applications
+on one platform for use on a different platform, provided a compiler capable
+of generating the appropriate output is available.  In such cross compiling
+scenarios, the platform on which the libraries or applications are compiled
+is called the @dfn{build platform}, while the platform on which the libraries
+or applications are intended to be used or executed is called the
+@dfn{host platform}.
+@ref{GNU Build System,, The GNU Build System, automake, The Automake Manual},
+of which libtool is a part, supports cross compiling via arguments passed to
+the configure script: @option{--build=...} and @option{--host=...}. However,
+when the build platform and host platform are very different, libtool is
+required to make certain accommodations to support these scenarios.
+
+In most cases, because the build platform and host platform differ, the
+cross-compiled libraries and executables can't be executed or tested on the
+build platform where they were compiled.  The testsuites of most build systems
+will often skip any tests that involve executing such foreign executables when
+cross-compiling.  However, if the build platform and host platform are
+sufficiently similar, it is often possible to run cross-compiled applications.
+Libtool's own testsuite often attempts to execute cross-compiled tests, but
+will mark any failures as @emph{skipped} since the failure might simply be due
+to the differences between the two platforms.
+
+In addition to cases where the host platform and build platform are extremely
+similar (e.g. @samp{i586-pc-linux-gnu} and @samp{i686-pc-linux-gnu}), there is
+another case in which cross-compiled host applications may be executed on the
+build platform.  This is possible when the build platform supports an emulation
+or API-enhanced environment for the host platform.  One example of this
+situation would be if the build platform were MinGW, and the host platform were
+Cygwin (or vice versa).  Both of these platforms can actually operate within a
+single Windows instance, so Cygwin applications can be launched from a MinGW
+context, and vice versa---provided certain care is taken.  Another example
+would be if the build platform were GNU/Linux on an x86 32bit processor, and
+the host platform were MinGW.  In this situation, the
+@uref{http://www.winehq.org/, Wine} environment can be used to launch Windows
+applications from the GNU/Linux operating system; again, provided certain care
+is taken.
+
+One particular issue occurs when a Windows platform such as MinGW, Cygwin, or
+MSYS is the host or build platform, while the other platform is a Unix-style
+system.  In these cases, there are often conflicts between the format of the
+file names and paths expected within host platform libraries and executables,
+and those employed on the build platform.
+
+This situation is best described using a concrete example: suppose the build
+platform is GNU/Linux with canonical triplet @samp{i686-pc-linux-gnu}.  Suppose
+further that the host platform is MinGW with canonical triplet
+@samp{i586-pc-mingw32}.  On the GNU/Linux platform there is a cross compiler
+following the usual naming conventions of such compilers, where the compiler
+name is prefixed by the host canonical triplet (or suitable alias).  (For more
+information concerning canonical triplets and platform aliases, see
+@ref{Specifying Target Triplets,, Specifying Target Triplets, autoconf,
+The Autoconf Manual} and @ref{Canonicalizing,, Canonicalizing, autoconf,
+The Autoconf Manual})  In this case, the C compiler is named
+@samp{i586-pc-mingw32-gcc}.
+
+As described in @ref{Wrapper executables}, for the MinGW host platform libtool
+uses a wrapper executable to set various environment variables before launching
+the actual program executable.  Like the program executable, the wrapper
+executable is cross-compiled for the host platform (that is, for MinGW).  As
+described above, ordinarily a host platform executable cannot be executed on
+the build platform, but in this case the Wine environment could be used to
+launch the MinGW application from GNU/Linux.  However, the wrapper executable,
+as a host platform (MinGW) application, must set the @env{PATH} variable so
+that the true application's dependent libraries can be located---but the
+contents of the @env{PATH} variable must be structured for MinGW.  Libtool
+must use the Wine file name mapping facilities to determine the correct value
+so that the wrapper executable can set the @env{PATH} variable to point to the
+correct location.
+
+For example, suppose we are compiling an application in @file{/var/tmp} on
+GNU/Linux, using separate source code and build directories:
+
+@example
+@multitable @columnfractions 0.5 0.5
+@item @file{/var/tmp/foo-1.2.3/app/} @tab (application source code)
+@item @file{/var/tmp/foo-1.2.3/lib/} @tab (library source code)
+@item @file{/var/tmp/BUILD/app/} @tab (application build objects here)
+@item @file{/var/tmp/BUILD/lib/} @tab (library build objects here)
+@end multitable
+@end example
+
+Since the library will be built in @file{/var/tmp/BUILD/lib}, the wrapper
+executable (which will be in @file{/var/tmp/BUILD/app}) must add that
+directory to @env{PATH} (actually, it must add the directory named
+@var{objdir} under @file{/var/tmp/BUILD/lib}, but we'll ignore that detail
+for now).  However, Windows does not have a concept of Unix-style file or
+directory names such as @file{/var/tmp/BUILD/lib}.  Therefore, Wine provides
+a mapping from Windows file names such as @file{C:\Program Files} to specific
+Unix-style file names.  Wine also provides a utility that can be used to map
+Unix-style file names to Windows file names.
+
+In this case, the wrapper executable should actually add the value
+
+@example
+Z:\var\tmp\BUILD\lib
+@end example
+
+@noindent
+to the @env{PATH}.  libtool contains support for path conversions of this
+type, for a certain limited set of build and host platform combinations. In
+this case, libtool will invoke Wine's @command{winepath} utility to ensure that
+the correct @env{PATH} value is used.  For more information, see
+@pxref{File name conversion}.
+
+@node File name conversion
+@subsection File name conversion
+@cindex file name conversion
+@cindex path conversion
+
+In certain situations, libtool must convert file names and paths between
+formats appropriate to different platforms.  Usually this occurs when
+cross-compiling, and affects only the ability to launch host platform
+executables on the build platform using an emulation or API-enhancement
+environment such as Wine.  Failure to convert paths
+(@pxref{File Name Conversion Failure}) will cause a warning to be issued, but
+rarely causes the build to fail---and should have no affect on the compiled
+products, once installed properly on the host platform.  For more information,
+@pxref{Cross compiling}.
+
+However, file name conversion may also occur in another scenario: when using a
+Unix emulation system on Windows (such as Cygwin or MSYS), combined with a
+native Windows compiler such as MinGW or MSVC.  Only a limited set of such
+scenarios are currently supported; in other cases file name conversion is
+skipped.  The lack of file name conversion usually means that uninstalled
+executables can't be launched, but only rarely causes the build to fail
+(@pxref{File Name Conversion Failure}).
+
+libtool supports file name conversion in the following scenarios:
+
+@multitable @columnfractions .25 .25 .5
+@headitem build platform @tab host platform @tab Notes
+@item MinGW (MSYS) @tab MinGW (Windows)
+@tab @pxref{Native MinGW File Name Conversion}
+
+@item Cygwin @tab MinGW (Windows)
+@tab @pxref{Cygwin/Windows File Name Conversion}
+
+@item Unix + Wine @tab MinGW (Windows)
+@tab Requires Wine. @pxref{Unix/Windows File Name Conversion}
+
+@item MinGW (MSYS) @tab Cygwin
+@tab Requires @env{LT_CYGPATH}. @pxref{LT_CYGPATH}. Provided for testing
+purposes only.
+
+@item Unix + Wine @tab Cygwin
+@tab Requires both Wine and @env{LT_CYGPATH}, but does not yet work with
+Cygwin 1.7.7 and Wine-1.2.
+See @pxref{Unix/Windows File Name Conversion} and @pxref{LT_CYGPATH}.
+@end multitable
+
+@menu
+* File Name Conversion Failure::  What happens when file name conversion fails
+* Native MinGW File Name Conversion::  MSYS file name conversion idiosyncrasies
+* Cygwin/Windows File Name Conversion::  Using @command{cygpath} to convert Cygwin file names
+* Unix/Windows File Name Conversion::  Using Wine to convert Unix paths
+* LT_CYGPATH::                  Invoking @command{cygpath} from other environments
+* Cygwin to MinGW Cross::       Other notes concerning MinGW cross
+@end menu
+
+@node File Name Conversion Failure
+@subsubsection File Name Conversion Failure
+@cindex File Name Conversion - Failure
+@cindex Path Conversion - Failure
+
+In most cases, file name conversion is not needed or attempted.  However, when
+libtool detects that a specific combination of build and host platform does
+require file name conversion, it is possible that the conversion may fail.
+In these cases, you may see a warning such as the following:
+
+@example
+Could not determine the host file name corresponding to
+  `... a file name ...'
+Continuing, but uninstalled executables may not work.
+@end example
+
+@noindent
+or
+
+@example
+Could not determine the host path corresponding to
+  `... a path ...'
+Continuing, but uninstalled executables may not work.
+@end example
+
+@noindent
+This should not cause the build to fail.  At worst, it means that the wrapper
+executable will specify file names or paths appropriate for the build platform.
+Since those are not appropriate for the host platform, the uninstalled
+executables would not operate correctly, even when the wrapper executable is
+launched via the appropriate emulation or API-enhancement (e.g. Wine).  Simply
+install the executables on the host platform, and execute them there.
+
+@node Native MinGW File Name Conversion
+@subsubsection Native MinGW File Name Conversion
+@cindex File Name Conversion - MinGW
+@cindex Path Conversion - MinGW
+@cindex MSYS
+
+MSYS is a Unix emulation environment for Windows, and is specifically designed
+such that in normal usage it @emph{pretends} to be MinGW or native Windows,
+but understands Unix-style file names and paths, and supports standard Unix
+tools and shells.  Thus, ``native'' MinGW builds are actually an odd sort of
+cross-compile, from an MSYS Unix emulation environment ``pretending'' to be
+MinGW, to actual native Windows.
+
+When an MSYS shell launches a native Windows executable (as opposed to other
+@emph{MSYS} executables), it uses a system of heuristics to detect any
+command-line arguments that contain file names or paths.  It automatically
+converts these file names from the MSYS (Unix-like) format, to the
+corresponding Windows file name, before launching the executable.  However,
+this auto-conversion facility is only available when using the MSYS runtime
+library.  The wrapper executable itself is a MinGW application (that is, it
+does not use the MSYS runtime library).  The wrapper executable must set
+@env{PATH} to, and call @code{_spawnv} with, values that have already been
+converted from MSYS format to Windows.  Thus, when libtool writes the source
+code for the wrapper executable, it must manually convert MSYS paths to
+Windows format, so that the Windows values can be hard-coded into the wrapper
+executable.
+
+@node Cygwin/Windows File Name Conversion
+@subsubsection Cygwin/Windows File Name Conversion
+@cindex File Name Conversion - Cygwin to Windows
+@cindex Path Conversion - Cygwin to Windows
+
+Cygwin provides a Unix emulation environment for Windows.  As part of that
+emulation, it provides a file system mapping that presents the Windows file
+system in a Unix-compatible manner.  Cygwin also provides a utility
+@command{cygpath} that can be used to convert file names and paths between
+the two representations.  In a correctly configured Cygwin installation,
+@command{cygpath} is always present, and is in the @env{PATH}.
+
+Libtool uses @command{cygpath} to convert from Cygwin (Unix-style) file names
+and paths to Windows format when the build platform is Cygwin and the host
+platform is MinGW.
+
+When the host platform is Cygwin, but the build platform is MSYS or some Unix
+system, libtool also uses @command{cygpath} to convert from Windows to Cygwin
+format (after first converting from the build platform format to Windows format;
+see @pxref{Native MinGW File Name Conversion} and
+@pxref{Unix/Windows File Name Conversion}).  Because the build platform is not
+Cygwin, @command{cygpath} is not (and should not be) in the @env{PATH}.
+Therefore, in this configuration the environment variable @env{LT_CYGPATH} is
+required. @xref{LT_CYGPATH}.
+
+@node Unix/Windows File Name Conversion
+@subsubsection Unix/Windows File Name Conversion
+@cindex File Name Conversion - Unix to Windows
+@cindex Path Conversion - Unix to Windows
+
+
+@uref{http://www.winehq.org/, Wine} provides an interpretation environment for
+some Unix platforms in which Windows applications can be executed.  It provides
+a mapping between the Unix file system and a virtual Windows file system used
+by the Windows programs.  For the file name conversion to work, Wine must be
+installed and properly configured on the build platform, and the
+@command{winepath} application must be in the build platform's @env{PATH}.  In
+addition, on 32bit GNU/Linux it is usually helpful if the binfmt extension is
+enabled.
+
+@node LT_CYGPATH
+@subsubsection LT_CYGPATH
+@cindex LT_CYGPATH
+
+For some cross-compile configurations (where the host platform is Cygwin), the
+@command{cygpath} program is used to convert file names from the build platform
+notation to the Cygwin form (technically, this conversion is from Windows
+notation to Cygwin notation; the conversion from the build platform format
+to Windows notation is performed via other means).  However, because the
+@command{cygpath} program is not (and should not be) in the @env{PATH} on
+the build platform, @env{LT_CYGPATH} must specify the full build platform
+file name (that is, the full Unix or MSYS file name) of the @command{cygpath}
+program.
+
+The reason @command{cygpath} should not be in the build platform @env{PATH} is
+twofold: first, @command{cygpath} is usually installed in the same directory as
+many other Cygwin executables, such as @command{sed}, @command{cp}, etc.  If
+the build platform environment had this directory in its @env{PATH}, then these
+Cygwin versions of common Unix utilities might be used in preference to the
+ones provided by the build platform itself, with deleterious effects.  Second,
+especially when Cygwin-1.7 or later is used, multiple Cygwin installations can
+coexist within the same Windows instance.  Each installation will have separate
+``mount tables'' specified in @file{@var{CYGROOT-N}/etc/fstab}.  These
+@dfn{mount tables} control how that instance of Cygwin will map Windows file
+names and paths to Cygwin form.  Each installation's @command{cygpath} utility
+automatically deduces the appropriate @file{/etc/fstab} file.  Since each
+@file{@var{CYGROOT-N}/etc/fstab} mount table may specify different mappings, it
+matters which @command{cygpath} is used.
+
+Note that @command{cygpath} is a Cygwin application; to execute this tool from
+Unix requires a working and properly configured Wine installation, as well
+as enabling the GNU/Linux @code{binfmt} extension.  Furthermore, the Cygwin
+@command{setup.exe} tool should have been used, via Wine, to properly install
+Cygwin into the Wine file system (and registry).
+
+Unfortunately, Wine support for Cygwin is intermittent.  Recent releases of
+Cygwin (1.7 and above) appear to require more Windows API support than Wine
+provides (as of Wine version 1.2); most Cygwin applications fail to execute.
+This includes @command{cygpath} itself.  Hence, it is best @emph{not} to use
+the LT_CYGPATH machinery in libtool when performing Unix to Cygwin
+cross-compiles.  Similarly, it is best @emph{not} to enable the GNU/Linux binfmt
+support in this configuration, because while Wine will fail to execute the
+compiled Cygwin applications, it will still exit with status zero.  This tends
+to confuse build systems and test suites (including libtool's own testsuite,
+resulting in spurious reported failures).  Wine support for the older
+Cygwin-1.5 series appears satisfactory, but the Cygwin team no longer supports
+Cygwin-1.5.  It is hoped that Wine will eventually be improved such that
+Cygwin-1.7 will again operate correctly under Wine.  Until then, libtool will
+report warnings as described in @pxref{File Name Conversion Failure} in these
+scenarios.
+
+However, @env{LT_CYGPATH} is also used for the MSYS to Cygwin cross compile
+scenario, and operates as expected.
+
+@node Cygwin to MinGW Cross
+@subsubsection Cygwin to MinGW Cross
+@cindex Cygwin to MinGW Cross
+
+There are actually three different scenarios that could all legitimately be
+called a ``Cygwin to MinGW'' cross compile.  The current (and standard)
+definition is when there is a compiler that produces native Windows libraries
+and applications, but which itself is a Cygwin application, just as would be
+expected in any other cross compile setup.
+
+However, historically there were two other definitions, which we will refer
+to as the @emph{fake} one, and the @emph{lying} one.
+
+In the @emph{fake} Cygwin to MinGW cross compile case, you actually use a
+native MinGW compiler, but you do so from within a Cygwin environment:
+
+@example
+@kbd{export PATH="/c/MinGW/bin:$@{PATH@}"}
+@kbd{configure --build=i686-pc-cygwin \
+	--host=mingw32 \
+	NM=/c/MinGW/bin/nm.exe}
+@end example
+
+In this way, the build system ``knows'' that you are cross compiling, and the
+file name conversion logic will be used.  However, because the tools
+(@command{mingw32-gcc}, @command{nm}, @command{ar}) used are actually native
+Windows applications, they will not understand any Cygwin (that is, Unix-like)
+absolute file names passed as command line arguments (and, unlike MSYS, Cygwin
+does not automatically convert such arguments).  However, so long as only
+relative file names are used in the build system, and non-Windows-supported
+Unix idioms such as symlinks and mount points are avoided, this scenario should
+work.
+
+If you must use absolute file names, you will have to force Libtool to convert
+file names for the toolchain in this case, by doing the following before you
+run configure:
+
+@example
+@kbd{export lt_cv_to_tool_file_cmd=func_convert_file_cygwin_to_w32}
+@end example
+@cindex lt_cv_to_tool_file_cmd
+@cindex func_convert_file_cygwin_to_w32
+
+In the @emph{lying} Cygwin to MinGW cross compile case, you lie to the
+build system:
+
+@example
+@kbd{export PATH="/c/MinGW/bin:$@{PATH@}"}
+@kbd{configure --build=i686-pc-mingw32 \
+	--host=i686-pc-mingw32 \
+	--disable-dependency-tracking}
+@end example
+
+@noindent
+and claim that the build platform is MinGW, even though you are actually
+running under @emph{Cygwin} and not MinGW.  In this case, libtool does
+@emph{not} know that you are performing a cross compile, and thinks instead
+that you are performing a native MinGW build.  However, as described in
+(@pxref{Native MinGW File Name Conversion}), that scenario triggers an ``MSYS
+to Windows'' file name conversion.  This, of course, is the wrong conversion
+since we are actually running under Cygwin.  Also, the toolchain is expecting
+Windows file names (not Cygwin) but unless told so Libtool will feed Cygwin
+file names to the toolchain in this case.  To force the correct file name
+conversions in this situation, you should do the following @emph{before}
+running configure:
+
+@example
+@kbd{export lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32}
+@kbd{export lt_cv_to_tool_file_cmd=func_convert_file_cygwin_to_w32}
+@end example
+@cindex lt_cv_to_host_file_cmd
+@cindex lt_cv_to_tool_file_cmd
+@cindex func_convert_file_cygwin_to_w32
+
+Note that this relies on internal implementation details of libtool, and
+is subject to change.  Also, @code{--disable-dependency-tracking} is required,
+because otherwise the MinGW GCC will generate dependency files that contain
+Windows file names.  This, in turn, will confuse the Cygwin @command{make}
+program, which does not accept Windows file names:
+
+@example
+Makefile:1: *** target pattern contains no `%'.  Stop.
+@end example
+
+There have also always been a number of other details required for the
+@emph{lying} case to operate correctly, such as the use of so-called
+@dfn{identity mounts}:
+
+@example
+# @var{cygwin-root}/etc/fstab
+D:/foo    /foo     some_fs binary 0 0
+D:/bar    /bar     some_fs binary 0 0
+E:/grill  /grill   some_fs binary 0 0
+@end example
+
+In this way, top-level directories of each drive are available using
+identical names within Cygwin.
+
+Note that you also need to ensure that the standard Unix directories
+(like @file{/bin}, @file{/lib}, @file{/usr}, @file{/etc}) appear in the root
+of a drive.  This means that you must install Cygwin itself into the @file{C:/}
+root directory (or @file{D:/}, or @file{E:/}, etc)---instead of the
+recommended installation into @file{C:/cygwin/}.  In addition, all file names
+used in the build system must be relative, symlinks should not be used within
+the source or build directory trees, and all @option{-M*} options to
+@command{gcc} except @option{-MMD} must be avoided.
+
+This is quite a fragile setup, but it has been in historical use, and so is
+documented here.
+
+@node Windows DLLs
+@subsection Windows DLLs
+@cindex Windows DLLs
+
+This topic describes a couple of ways to portably create Windows Dynamic
+Link Libraries (DLLs).  Libtool knows how to create DLLs using GNU tools
+and using Microsoft tools.
+
+A typical library has a ``hidden'' implementation with an interface
+described in a header file.  On just about every system, the interface
+could be something like this:
+
+Example @file{foo.h}:
+
+@example
+#ifndef FOO_H
+#define FOO_H
+
+int one (void);
+int two (void);
+extern int three;
+
+#endif /* FOO_H */
+@end example
+
+@noindent
+And the implementation could be something like this:
+
+Example @file{foo.c}:
+
+@example
+#include "foo.h"
+
+int one (void)
+@{
+  return 1;
+@}
+
+int two (void)
+@{
+  return three - one ();
+@}
+
+int three = 3;
+@end example
+
+When using contemporary GNU tools to create the Windows DLL, the above
+code will work there too, thanks to its auto-import/auto-export
+features.  But that is not the case when using older GNU tools or perhaps
+more interestingly when using proprietary tools.  In those cases the code
+will need additional decorations on the interface symbols with
+@code{__declspec(dllimport)} and @code{__declspec(dllexport)} depending
+on whether the library is built or it's consumed and how it's built and
+consumed.  However, it should be noted that it would have worked also
+with Microsoft tools, if only the variable @code{three} hadn't been
+there, due to the fact the Microsoft tools will automatically import
+functions (but sadly not variables) and Libtool will automatically export
+non-static symbols as described next.
+
+With Microsoft tools, Libtool digs through the object files that make up
+the library, looking for non-static symbols to automatically export.
+I.e., Libtool with Microsoft tools tries to mimic the auto-export feature
+of contemporary GNU tools.  It should be noted that the GNU auto-export
+feature is turned off when an explicit @code{__declspec(dllexport)} is
+seen.  The GNU tools do this to not make more symbols visible for projects
+that have already taken the trouble to decorate symbols.  There is no
+similar way to limit which symbols are visible in the code when Libtool
+is using Microsoft tools.  In order to limit symbol visibility in that
+case you need to use one of the options @option{-export-symbols} or
+@option{-export-symbols-regex}.
+
+No matching help with auto-import is provided by Libtool, which is why
+variables must be decorated to import them from a DLL for everything but
+contemporary GNU tools.  As stated above, functions are automatically
+imported by both contemporary GNU tools and Microsoft tools, but for
+other proprietary tools the auto-import status of functions is unknown.
+
+When the objects that form the library are built, there are generally
+two copies built for each object.  One copy is used when linking the DLL
+and one copy is used for the static library.  On Windows systems, a pair
+of defines are commonly used to discriminate how the interface symbols
+should be decorated.  The first define is @samp{-DDLL_EXPORT} which is
+automatically provided by Libtool when @command{libtool} builds the copy
+of the object that is destined for the DLL.  The second define is
+@samp{-DLIBFOO_BUILD} (or similar) which is often added by the package
+providing the library and is used when building the library, but not
+when consuming the library.
+
+However, the matching double compile is not performed when consuming
+libraries.  It is therefore not possible to reliably distinguish if the
+consumer is importing from a DLL or if it is going to use a static
+library.
+
+With contemporary GNU tools, auto-import often saves the day, but see
+the GNU ld documentation and its @option{--enable-auto-import} option
+for some corner cases when it does not
+(@pxref{Options, @option{--enable-auto-import}, Options specific to
+i386 PE targets, ld, Using ld@comma{} the GNU linker}).
+
+With Microsoft tools you typically get away with always compiling the
+code such that variables are expected to be imported from a DLL and
+functions are expected to be found in a static library.  The tools will
+then automatically import the function from a DLL if that is where they
+are found.  If the variables are not imported from a DLL as expected, but
+are found in a static library that is otherwise pulled in by some
+function, the linker will issue a warning (LNK4217) that a locally
+defined symbol is imported, but it still works.  In other words, this
+scheme will not work to only consume variables from a library.  There is
+also a price connected to this liberal use of imports in that an extra
+indirection is introduced when you are consuming the static version of
+the library.  That extra indirection is unavoidable when the DLL is
+consumed, but it is not needed when consuming the static library.
+
+For older GNU tools and other proprietary tools there is no generic way
+to make it possible to consume either of the DLL or the static library
+without user intervention, the tools need to be told what is intended.
+One common assumption is that if a DLL is being built (@samp{DLL_EXPORT}
+is defined) then that DLL is going to consume any dependent libraries as
+DLLs.  If that assumption is made everywhere, it is possible to select
+how an end-user application is consuming libraries by adding a single
+flag @samp{-DDLL_EXPORT} when a DLL build is required.  This is of course
+an all or nothing deal, either everything as DLLs or everything as static
+libraries.
+
+To sum up the above, the header file of the foo library needs to be
+changed into something like this:
+
+Modified @file{foo.h}:
+
+@example
+#ifndef FOO_H
+#define FOO_H
+
+#if defined _WIN32 && !defined __GNUC__
+# ifdef LIBFOO_BUILD
+#  ifdef DLL_EXPORT
+#   define LIBFOO_SCOPE            __declspec (dllexport)
+#   define LIBFOO_SCOPE_VAR extern __declspec (dllexport)
+#  endif
+# elif defined _MSC_VER
+#  define LIBFOO_SCOPE
+#  define LIBFOO_SCOPE_VAR  extern __declspec (dllimport)
+# elif defined DLL_EXPORT
+#  define LIBFOO_SCOPE             __declspec (dllimport)
+#  define LIBFOO_SCOPE_VAR  extern __declspec (dllimport)
+# endif
+#endif
+#ifndef LIBFOO_SCOPE
+# define LIBFOO_SCOPE
+# define LIBFOO_SCOPE_VAR extern
+#endif
+
+LIBFOO_SCOPE     int one (void);
+LIBFOO_SCOPE     int two (void);
+LIBFOO_SCOPE_VAR int three;
+
+#endif /* FOO_H */
+@end example
+
+When the targets are limited to contemporary GNU tools and Microsoft
+tools, the above can be simplified to the following:
+
+Simplified @file{foo.h}:
+
+@example
+#ifndef FOO_H
+#define FOO_H
+
+#if defined _WIN32 && !defined __GNUC__ && !defined LIBFOO_BUILD
+# define LIBFOO_SCOPE_VAR extern __declspec (dllimport)
+#else
+# define LIBFOO_SCOPE_VAR extern
+#endif
+
+int one (void);
+int two (void);
+LIBFOO_SCOPE_VAR int three;
+
+#endif /* FOO_H */
+@end example
+
+This last simplified version can of course only work when Libtool is
+used to build the DLL, as no symbols would be exported otherwise (i.e.,
+when using Microsoft tools).
+
+It should be noted that there are various projects that attempt to relax
+these requirements by various low level tricks, but they are not
+discussed here.
+Examples are
+@uref{http://alain.frisch.fr/@/flexdll.html, FlexDLL} and
+@uref{http://edll.sourceforge.net/, edll}.
+
+
+@node libtool script contents
+@section @code{libtool} script contents
+@cindex implementation of libtool
+@cindex libtool implementation
+
+Since version 1.4, the @code{libtool} script is generated by
+@code{configure} (@pxref{Configuring}).  In earlier versions,
+@code{configure} achieved this by calling a helper script called
+@file{ltconfig}.  From libtool version 0.7 to 1.0, this script
+simply set shell variables, then sourced the libtool backend,
+@code{ltmain.sh}.  @code{ltconfig} from libtool version 1.1 through 1.3
+inlined the contents of @code{ltmain.sh} into the generated
+@code{libtool}, which improved performance on many systems.  The tests
+that @file{ltconfig} used to perform are now kept in @file{libtool.m4}
+where they can be written using Autoconf.  This has the runtime
+performance benefits of inlined @code{ltmain.sh}, @emph{and} improves
+the build time a little while considerably easing the amount of raw
+shell code that used to need maintaining.
+
+The convention used for naming variables that hold shell commands for
+delayed evaluation, is to use the suffix @code{_cmd} where a single
+line of valid shell script is needed, and the suffix @code{_cmds} where
+multiple lines of shell script @strong{may} be delayed for later
+evaluation.  By convention, @code{_cmds} variables delimit the
+evaluation units with the @code{~} character where necessary.
+
+Here is a listing of each of the configuration variables, and how they
+are used within @code{ltmain.sh} (@pxref{Configuring}):
+
+@defvar AR
+The name of the system library archiver.
+@end defvar
+
+@defvar CC
+The name of the compiler used to configure libtool.  This will always
+contain the compiler for the current language (@pxref{Tags}).
+@end defvar
+
+@defvar ECHO
+An @command{echo} program that does not interpret backslashes as an
+escape character.  It may be given only one argument, so due quoting
+is necessary.
+@end defvar
+
+@defvar LD
+The name of the linker that libtool should use internally for reloadable
+linking and possibly shared libraries.
+@end defvar
+
+@defvar LTCC
+@defvarx LTCFLAGS
+The name of the C compiler and C compiler flags used to configure
+libtool.
+@end defvar
+
+@defvar NM
+The name of a BSD- or MS-compatible program that produces listings of
+global symbols.
+For BSD @command{nm}, the symbols should be in one the following formats:
+
+@example
+@var{address} C @var{global-variable-name}
+@var{address} D @var{global-variable-name}
+@var{address} T @var{global-function-name}
+@end example
+
+For MS @command{dumpbin}, the symbols should be in one of the following
+formats:
+
+@example
+@var{counter} @var{size}    UNDEF    notype       External     | @var{global-var}
+@var{counter} @var{address} @var{section}  notype       External     | @var{global-var}
+@var{counter} @var{address} @var{section}  notype ()    External     | @var{global-func}
+@end example
+
+The @var{size} of the global variables are not zero and the @var{section}
+of the global functions are not "UNDEF". Symbols in "pick any" sections
+("pick any" appears in the section header) are not global either.
+@end defvar
+
+@defvar RANLIB
+Set to the name of the @command{ranlib} program, if any.
+@end defvar
+
+@defvar allow_undefined_flag
+The flag that is used by @samp{archive_cmds} in order to declare that
+there will be unresolved symbols in the resulting shared library.
+Empty, if no such flag is required.  Set to @samp{unsupported} if there
+is no way to generate a shared library with references to symbols that
+aren't defined in that library.
+@end defvar
+
+@defvar always_export_symbols
+Whether libtool should automatically generate a list of exported symbols
+using @code{export_symbols_cmds} before linking an archive.
+Set to @samp{yes} or @samp{no}.  Default is @samp{no}.
+@end defvar
+
+@defvar archive_cmds
+@defvarx archive_expsym_cmds
+@defvarx old_archive_cmds
+Commands used to create shared libraries, shared libraries with
+@option{-export-symbols} and static libraries, respectively.
+@end defvar
+
+@defvar archiver_list_spec
+Specify filename containing input files for @code{AR}.
+@end defvar
+
+@defvar old_archive_from_new_cmds
+If the shared library depends on a static library,
+@samp{old_archive_from_new_cmds} contains the commands used to create that
+static library.  If this variable is not empty, @samp{old_archive_cmds} is
+not used.
+@end defvar
+
+@defvar old_archive_from_expsyms_cmds
+If a static library must be created from the export symbol list in order to
+correctly link with a shared library, @samp{old_archive_from_expsyms_cmds}
+contains the commands needed to create that static library.  When these
+commands are executed, the variable @code{soname} contains the name of the
+shared library in question, and the @samp{$objdir/$newlib} contains the
+path of the static library these commands should build.  After executing
+these commands, libtool will proceed to link against @samp{$objdir/$newlib}
+instead of @code{soname}.
+@end defvar
+
+@defvar lock_old_archive_extraction
+Set to @samp{yes} if the extraction of a static library requires locking
+the library file.  This is required on Darwin.
+@end defvar
+
+@defvar build
+@defvarx build_alias
+@defvarx build_os
+Set to the specified and canonical names of the system that libtool was
+built on.
+@end defvar
+
+@defvar build_libtool_libs
+Whether libtool should build shared libraries on this system.  Set to
+@samp{yes} or @samp{no}.
+@end defvar
+
+@defvar build_old_libs
+Whether libtool should build static libraries on this system.  Set to
+@samp{yes} or @samp{no}.
+@end defvar
+
+@defvar compiler_c_o
+Whether the compiler supports the @option{-c} and @option{-o} options
+simultaneously.  Set to @samp{yes} or @samp{no}.
+@end defvar
+
+@defvar compiler_needs_object
+Whether the compiler has to see an object listed on the command line in
+order to successfully invoke the linker.  If @samp{no}, then a set of
+convenience archives or a set of object file names can be passed via
+linker-specific options or linker scripts.
+@end defvar
+
+@defvar dlopen_support
+Whether @code{dlopen} is supported on the platform.
+Set to @samp{yes} or @samp{no}.
+@end defvar
+
+@defvar dlopen_self
+Whether it is possible to @code{dlopen} the executable itself.
+Set to @samp{yes} or @samp{no}.
+@end defvar
+
+@defvar dlopen_self_static
+Whether it is possible to @code{dlopen} the executable itself, when it
+is linked statically (@option{-all-static}).  Set to @samp{yes} or
+@samp{no}.
+@end defvar
+
+@defvar exclude_expsyms
+List of symbols that should not be listed in the preloaded symbols.
+@end defvar
+
+@defvar export_dynamic_flag_spec
+Compiler link flag that allows a dlopened shared library to reference
+symbols that are defined in the program.
+@end defvar
+
+@defvar export_symbols_cmds
+Commands to extract exported symbols from @code{libobjs} to the
+file @code{export_symbols}.
+@end defvar
+
+@defvar extract_expsyms_cmds
+Commands to extract the exported symbols list from a shared library.
+These commands are executed if there is no file @samp{$objdir/$soname-def},
+and should write the names of the exported symbols to that file, for
+the use of @samp{old_archive_from_expsyms_cmds}.
+@end defvar
+
+@defvar fast_install
+Determines whether libtool will privilege the installer or the
+developer.  The assumption is that installers will seldom run programs
+in the build tree, and the developer will seldom install.  This is only
+meaningful on platforms where @code{shlibpath_overrides_runpath} is
+not @samp{yes}, so @code{fast_install} will be set to @samp{needless} in
+this case.  If @code{fast_install} set to @samp{yes}, libtool will create
+programs that search for installed libraries, and, if a program is run
+in the build tree, a new copy will be linked on-demand to use the
+yet-to-be-installed libraries.  If set to @samp{no}, libtool will create
+programs that use the yet-to-be-installed libraries, and will link
+a new copy of the program at install time.  The default value is
+@samp{yes} or @samp{needless}, depending on platform and configuration
+flags, and it can be turned from @samp{yes} to @samp{no} with the
+configure flag @option{--disable-fast-install}.
+
+On some systems, the linker always hardcodes paths to dependent libraries
+into the output.  In this case, @code{fast_install} is never set to @samp{yes},
+and relinking at install time is triggered.  This also means that @env{DESTDIR}
+installation does not work as expected.
+@end defvar
+
+@defvar file_magic_glob
+How to find potential files when @code{deplibs_check_method} is
+@samp{file_magic}. @code{file_magic_glob} is a @code{sed} expression,
+and the @code{sed} instance is fed potential file names that are
+transformed by the @code{file_magic_glob} expression. Useful when the
+shell does not support the shell option @code{nocaseglob}, making
+@code{want_nocaseglob} inappropriate. Normally disabled (i.e.
+@code{file_magic_glob} is empty).
+@end defvar
+
+@defvar finish_cmds
+Commands to tell the dynamic linker how to find shared libraries in a
+specific directory.
+@end defvar
+
+@defvar finish_eval
+Same as @code{finish_cmds}, except the commands are not displayed.
+@end defvar
+
+@defvar global_symbol_pipe
+A pipeline that takes the output of @code{NM}, and produces a listing of
+raw symbols followed by their C names.  For example:
+
+@example
+$ @kbd{eval "$NM progname | $global_symbol_pipe"}
+D @var{symbol1} @var{C-symbol1}
+T @var{symbol2} @var{C-symbol2}
+C @var{symbol3} @var{C-symbol3}
+@dots{}
+$
+@end example
+
+The first column contains the symbol type (used to tell data from code)
+but its meaning is system dependent.
+@end defvar
+
+@defvar global_symbol_to_cdecl
+A pipeline that translates the output of @code{global_symbol_pipe} into
+proper C declarations.  Since some platforms, such as HP/UX, have
+linkers that differentiate code from data, data symbols are declared
+as data, and code symbols are declared as functions.
+@end defvar
+
+@defvar hardcode_action
+Either @samp{immediate} or @samp{relink}, depending on whether shared
+library paths can be hardcoded into executables before they are installed,
+or if they need to be relinked.
+@end defvar
+
+@defvar hardcode_direct
+Set to @samp{yes} or @samp{no}, depending on whether the linker
+hardcodes directories if a library is directly specified on the command
+line (such as @samp{@var{dir}/lib@var{name}.a}) when
+@code{hardcode_libdir_flag_spec} is specified.
+@end defvar
+
+@defvar hardcode_direct_absolute
+Some architectures hardcode "absolute" library directories that can not
+be overridden by @code{shlibpath_var} when @code{hardcode_direct} is
+@samp{yes}.  In that case set @code{hardcode_direct_absolute} to
+@samp{yes}, or otherwise @samp{no}.
+@end defvar
+
+@defvar hardcode_into_libs
+Whether the platform supports hardcoding of run-paths into libraries.
+If enabled, linking of programs will be much simpler but libraries will
+need to be relinked during installation.  Set to @samp{yes} or @samp{no}.
+@end defvar
+
+@defvar hardcode_libdir_flag_spec
+Flag to hardcode a @code{libdir} variable into a binary, so that the
+dynamic linker searches @code{libdir} for shared libraries at runtime.
+If it is empty, libtool will try to use some other hardcoding mechanism.
+@end defvar
+
+@defvar hardcode_libdir_separator
+If the compiler only accepts a single @code{hardcode_libdir_flag}, then
+this variable contains the string that should separate multiple
+arguments to that flag.
+@end defvar
+
+@defvar hardcode_minus_L
+Set to @samp{yes} or @samp{no}, depending on whether the linker
+hardcodes directories specified by @option{-L} flags into the resulting
+executable when @code{hardcode_libdir_flag_spec} is specified.
+@end defvar
+
+@defvar hardcode_shlibpath_var
+Set to @samp{yes} or @samp{no}, depending on whether the linker
+hardcodes directories by writing the contents of @samp{$shlibpath_var}
+into the resulting executable when @code{hardcode_libdir_flag_spec} is
+specified.  Set to @samp{unsupported} if directories specified by
+@samp{$shlibpath_var} are searched at run time, but not at link time.
+@end defvar
+
+@defvar host
+@defvarx host_alias
+@defvarx host_os
+Set to the specified and canonical names of the system that libtool was
+configured for.
+@end defvar
+
+@defvar include_expsyms
+List of symbols that must always be exported when using @code{export_symbols}.
+@end defvar
+
+@defvar inherit_rpath
+Whether the linker adds runtime paths of dependency libraries to the
+runtime path list, requiring libtool to relink the output when installing.
+Set to @samp{yes} or @samp{no}.  Default is @samp{no}.
+@end defvar
+
+@defvar install_override_mode
+Permission mode override for installation of shared libraries.  If the
+runtime linker fails to load libraries with wrong permissions, then it
+may fail to execute programs that are needed during installation,
+because these need the library that has just been installed.  In this
+case, it is necessary to pass the mode to @command{install} with
+@option{-m @var{install_override_mode}}.
+@end defvar
+
+@defvar libext
+The standard old archive suffix (normally @samp{a}).
+@end defvar
+
+@defvar libname_spec
+The format of a library name prefix.  On all Unix systems, static
+libraries are called @samp{lib@var{name}.a}, but on some systems (such
+as OS/2 or MS-DOS), the library is just called @samp{@var{name}.a}.
+@end defvar
+
+@defvar library_names_spec
+A list of shared library names.  The first is the name of the file,
+the rest are symbolic links to the file.  The name in the list is
+the file name that the linker finds when given @option{-l@var{name}}.
+@end defvar
+
+@defvar link_all_deplibs
+Whether libtool must link a program against all its dependency libraries.
+Set to @samp{yes} or @samp{no}.  Default is @samp{unknown}, which is
+a synonym for @samp{yes}.
+@end defvar
+
+@defvar link_static_flag
+Linker flag (passed through the C compiler) used to prevent dynamic
+linking.
+@end defvar
+
+@defvar macro_version
+@defvarx macro_revision
+The release and revision from which the libtool.m4 macros were
+taken.  This is used to ensure that macros and @code{ltmain.sh}
+correspond to the same Libtool version.
+@end defvar
+
+@defvar max_cmd_len
+The approximate longest command line that can be passed to @samp{$SHELL}
+without being truncated, as computed by @samp{LT_CMD_MAX_LEN}.
+@end defvar
+
+@defvar need_lib_prefix
+Whether we can @code{dlopen} modules without a @samp{lib} prefix.
+Set to @samp{yes} or @samp{no}.  By default, it is @samp{unknown}, which
+means the same as @samp{yes}, but documents that we are not really sure
+about it.  @samp{no} means that it is possible to @code{dlopen} a
+module without the @samp{lib} prefix.
+@end defvar
+
+@defvar need_version
+Whether versioning is required for libraries, i.e.@: whether the
+dynamic linker requires a version suffix for all libraries.
+Set to @samp{yes} or @samp{no}.  By default, it is @samp{unknown}, which
+means the same as @samp{yes}, but documents that we are not really sure
+about it.
+@end defvar
+
+@defvar need_locks
+Whether files must be locked to prevent conflicts when compiling
+simultaneously.  Set to @samp{yes} or @samp{no}.
+@end defvar
+
+@defvar nm_file_list_spec
+Specify filename containing input files for @code{NM}.
+@end defvar
+
+@defvar no_builtin_flag
+Compiler flag to disable builtin functions that conflict with declaring
+external global symbols as @code{char}.
+@end defvar
+
+@defvar no_undefined_flag
+The flag that is used by @samp{archive_cmds} in order to declare that
+there will be no unresolved symbols in the resulting shared library.
+Empty, if no such flag is required.
+@end defvar
+
+@defvar objdir
+The name of the directory that contains temporary libtool files.
+@end defvar
+
+@defvar objext
+The standard object file suffix (normally @samp{o}).
+@end defvar
+
+@defvar pic_flag
+Any additional compiler flags for building library object files.
+@end defvar
+
+@defvar postinstall_cmds
+@defvarx old_postinstall_cmds
+Commands run after installing a shared or static library, respectively.
+@end defvar
+
+@defvar postuninstall_cmds
+@defvarx old_postuninstall_cmds
+Commands run after uninstalling a shared or static library, respectively.
+@end defvar
+
+@defvar postlink_cmds
+Commands necessary for finishing linking programs. @code{postlink_cmds}
+are executed immediately after the program is linked.  Any occurrence of
+the string @code{@@OUTPUT@@} in @code{postlink_cmds} is replaced by the
+name of the created executable (i.e.@: not the wrapper, if a wrapper is
+generated) prior to execution.  Similarly, @code{@@TOOL_OUTPUT@@} is
+replaced by the toolchain format of @code{@@OUTPUT@@}.  Normally disabled
+(i.e.@: @code{postlink_cmds} empty).
+@end defvar
+
+@defvar reload_cmds
+@defvarx reload_flag
+Commands to create a reloadable object.  Set @code{reload_cmds} to
+@samp{false} on systems that cannot create reloadable objects.
+@end defvar
+
+@defvar runpath_var
+The environment variable that tells the linker which directories to
+hardcode in the resulting executable.
+@end defvar
+
+@defvar shlibpath_overrides_runpath
+Indicates whether it is possible to override the hard-coded library
+search path of a program with an environment variable.  If this is set
+to no, libtool may have to create two copies of a program in the build
+tree, one to be installed and one to be run in the build tree only.
+When each of these copies is created depends on the value of
+@code{fast_install}.  The default value is @samp{unknown}, which is
+equivalent to @samp{no}.
+@end defvar
+
+@defvar shlibpath_var
+The environment variable that tells the dynamic linker where to find
+shared libraries.
+@end defvar
+
+@defvar soname_spec
+The name coded into shared libraries, if different from the real name of
+the file.
+@end defvar
+
+@defvar striplib
+@defvarx old_striplib
+Command to strip a shared (@code{striplib}) or static (@code{old_striplib})
+library, respectively.  If these variables are empty, the strip flag
+in the install mode will be ignored for libraries (@pxref{Install mode}).
+@end defvar
+
+@defvar sys_lib_dlsearch_path_spec
+Expression to get the run-time system library search path.  Directories
+that appear in this list are never hard-coded into executables.
+@end defvar
+
+@defvar sys_lib_search_path_spec
+Expression to get the compile-time system library search path.  This
+variable is used by libtool when it has to test whether a certain
+library is shared or static.  The directories listed in
+@code{shlibpath_var} are automatically appended to this list, every time
+libtool runs (i.e., not at configuration time), because some linkers use
+this variable to extend the library search path.  Linker switches such
+as @option{-L} also augment the search path.
+@end defvar
+
+@defvar thread_safe_flag_spec
+Linker flag (passed through the C compiler) used to generate thread-safe
+libraries.
+@end defvar
+
+@defvar to_host_file_cmd
+If the toolchain is not native to the build platform (e.g.@: if you are using
+MSYS to drive the scripting, but are using the MinGW native Windows compiler)
+this variable describes how to convert file names from the format used by the
+build platform to the format used by host platform.  Normally set to
+@samp{func_convert_file_noop}, libtool will autodetect most cases in which
+other values should be used.  On rare occasions, it may be necessary to override
+the autodetected value (@pxref{Cygwin to MinGW Cross}).
+@end defvar
+
+@defvar to_tool_file_cmd
+If the toolchain is not native to the build platform (e.g.@: if you are using
+some Unix to drive the scripting together with a Windows toolchain running
+in Wine) this variable describes how to convert file names from the format
+used by the build platform to the format used by the toolchain.  Normally set
+to @samp{func_convert_file_noop}.
+@end defvar
+
+@defvar version_type
+The library version numbering type.  One of @samp{libtool},
+@samp{freebsd-aout}, @samp{freebsd-elf}, @samp{irix}, @samp{linux},
+@samp{osf}, @samp{sunos}, @samp{windows}, or @samp{none}.
+@end defvar
+
+@defvar want_nocaseglob
+Find potential files using the shell option @code{nocaseglob}, when
+@code{deplibs_check_method} is @samp{file_magic}. Normally set to
+@samp{no}. Set to @samp{yes} to enable the @code{nocaseglob} shell
+option when looking for potential file names in a case-insensitive
+manner.
+@end defvar
+
+@defvar whole_archive_flag_spec
+Compiler flag to generate shared objects from convenience archives.
+@end defvar
+
+@defvar wl
+The C compiler flag that allows libtool to pass a flag directly to the
+linker.  Used as: @code{$@{wl@}@var{some-flag}}.
+@end defvar
+
+Variables ending in @samp{_cmds} or @samp{_eval} contain a
+@samp{~}-separated list of commands that are @code{eval}ed one after
+another.  If any of the commands return a nonzero exit status, libtool
+generally exits with an error message.
+
+Variables ending in @samp{_spec} are @code{eval}ed before being used by
+libtool.
+
+@node Cheap tricks
+@section Cheap tricks
+
+Here are a few tricks that you can use in order to make maintainership
+easier:
+
+@itemize @bullet
+@item
+When people report bugs, ask them to use the @option{--config},
+@option{--debug}, or @option{--features} flags, if you think they will help
+you.  These flags are there to help you get information directly, rather
+than having to trust second-hand observation.
+
+@item
+Rather than reconfiguring libtool every time I make a change to
+@code{ltmain.in}, I keep a permanent @code{libtool} script in my
+@env{PATH}, which sources @code{ltmain.in} directly.
+
+The following steps describe how to create such a script, where
+@code{/home/src/libtool} is the directory containing the libtool source
+tree, @code{/home/src/libtool/libtool} is a libtool script that has been
+configured for your platform, and @code{~/bin} is a directory in your
+@env{PATH}:
+
+@smallexample
+trick$ cd ~/bin
+trick$ sed 's%^\(macro_version=\).*$%\1@@VERSION@@%;
+            s%^\(macro_revision=\).*$%\1@@package_revision@@%;
+            /^# ltmain\.sh/q' /home/src/libtool/libtool > libtool
+trick$ echo '. /home/src/libtool/ltmain.in' >> libtool
+trick$ chmod +x libtool
+trick$ libtool --version
+ltmain.sh (GNU @@PACKAGE@@@@TIMESTAMP@@) @@VERSION@@
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+trick$
+@end smallexample
+@end itemize
+
+The output of the final @samp{libtool --version} command shows that the
+@code{ltmain.in} script is being used directly.  Now, modify
+@code{~/bin/libtool} or @code{/home/src/libtool/ltmain.in} directly in
+order to test new changes without having to rerun @code{configure}.
+
+@node GNU Free Documentation License
+@appendix GNU Free Documentation License
+
+@cindex FDL, GNU Free Documentation License
+
+@include fdl.texi
+
+@page
+@node Combined Index
+@unnumbered Combined Index
+
+@printindex cp
+
+@bye
diff --git a/doc/libtoolize.1 b/doc/libtoolize.1
new file mode 100644
index 0000000..1e53702
--- /dev/null
+++ b/doc/libtoolize.1
@@ -0,0 +1,110 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.40.4.
+.TH LIBTOOLIZE "1" "October 2011" "libtoolize 2.4.1a" "User Commands"
+.SH NAME
+libtoolize \- manual page for libtoolize 2.4.1a
+.SH SYNOPSIS
+.B libtoolize
+[\fIOPTION\fR]...
+.SH DESCRIPTION
+Prepare a package to use libtool.
+.TP
+\fB\-c\fR, \fB\-\-copy\fR
+copy files rather than symlinking them
+.TP
+\fB\-\-debug\fR
+enable verbose shell tracing
+.TP
+\fB\-n\fR, \fB\-\-dry\-run\fR
+print commands rather than running them
+.TP
+\fB\-f\fR, \fB\-\-force\fR
+replace existing files
+.TP
+\fB\-i\fR, \fB\-\-install\fR
+copy missing auxiliary files
+.TP
+\fB\-\-ltdl\fR[=\fIDIR\fR]
+install libltdl sources [default: libltdl]
+.TP
+\fB\-\-no\-warn\fR
+don't display warning messages
+.TP
+\fB\-\-nonrecursive\fR
+prepare ltdl for non\-recursive make
+.TP
+\fB\-q\fR, \fB\-\-quiet\fR
+work silently
+.TP
+\fB\-\-recursive\fR
+prepare ltdl for recursive make
+.TP
+\fB\-\-subproject\fR
+prepare ltdl to configure and build independently
+.TP
+\fB\-v\fR, \fB\-\-verbose\fR
+verbosely report processing
+.TP
+\fB\-\-version\fR
+print version information and exit
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+print short or long help message
+.PP
+The following space or comma delimited options can be passed to libtoolize
+via the environment variable LIBTOOLIZE_OPTIONS, unknown environment
+options are ignored:
+.TP
+\fB\-\-debug\fR
+enable verbose shell tracing
+.TP
+\fB\-\-no\-warn\fR
+don't display warning messages
+.TP
+\fB\-\-quiet\fR
+work silently
+.TP
+\fB\-\-verbose\fR
+verbosely report processing
+.PP
+You must `cd' to the top directory of your package before you run
+`libtoolize'.
+.PP
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+.TP
+host\-triplet:
+x86_64\-apple\-darwin11.2.0
+.TP
+libtoolize:
+(GNU libtool) 2.4.1a
+.TP
+automake:
+automake (GNU automake) 1.11.1
+.TP
+autoconf:
+autoconf (GNU Autoconf) 2.68
+.SH AUTHOR
+Written by Gary V. Vaughan <gary@gnu.org>, 2003
+.SH "REPORTING BUGS"
+Report bugs to <bug\-libtool@gnu.org>.
+.br
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+.br
+General help using GNU software: <http://www.gnu.org/gethelp/>.
+.SH COPYRIGHT
+Copyright \(co 2010 Free Software Foundation, Inc.
+.br
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+.SH "SEE ALSO"
+The full documentation for
+.B libtoolize
+is maintained as a Texinfo manual.  If the
+.B info
+and
+.B libtoolize
+programs are properly installed at your site, the command
+.IP
+.B info libtoolize
+.PP
+should give you access to the complete manual.
diff --git a/doc/notes.texi b/doc/notes.texi
new file mode 100644
index 0000000..57fc6d5
--- /dev/null
+++ b/doc/notes.texi
@@ -0,0 +1,80 @@
+@itemize
+
+@item
+You currently need GNU make to build the Libtool package itself.
+
+@item
+On AIX there are two different styles of shared linking, one in which symbols
+are bound at link-time and one in which symbols are bound at runtime only,
+similar to ELF@.  In case of doubt use @code{LDFLAGS=-Wl,-brtl} for the latter style.
+
+@item
+On AIX, native tools are to be preferred over binutils; especially for C++ code,
+if using the AIX Toolbox GCC 4.0 and binutils, configure with
+@code{AR=/usr/bin/ar LD=/usr/bin/ld NM='/usr/bin/nm -B'}.
+
+@item
+On AIX, the @command{/bin/sh} is very slow due to its inefficient handling
+of here-documents.  A modern shell is preferable:
+@example
+CONFIG_SHELL=/bin/bash; export $CONFIG_SHELL
+$CONFIG_SHELL ./configure [...]
+@end example
+
+@item
+For C++ code with templates, it may be necessary to specify the way the compiler
+will generate the instantiations.  For Portland pgCC version5, use
+@code{CXX='pgCC --one_instantiation_per_object'} and avoid parallel @command{make}.
+
+@item
+On Darwin, for C++ code with templates you need two level shared libraries.
+Libtool builds these by default if @env{MACOSX_DEPLOYMENT_TARGET} is set to
+10.3 or later at @command{configure} time.  See @url{rdar://problem/4135857}
+for more information on this issue.
+
+@c @item
+@c FreeBSD @command{make} does not conform to @sc{posix} in its handling
+@c of file modification times, which causes it to loop while building libtool.
+@c Consider using a different @command{such} as GNU make instead.
+
+@item
+The default shell on UNICOS 9, a ksh 88e variant, is too buggy to
+correctly execute the libtool script.  Users are advised to install a
+modern shell such as GNU bash.
+
+@item
+Some HP-UX @command{sed} programs are horribly broken, and cannot handle
+libtool's requirements, so users may report unusual problems.  There
+is no workaround except to install a working @command{sed} (such as GNU sed)
+on these systems.
+
+@item
+The vendor-distributed NCR MP-RAS @command{cc} programs emits copyright
+on standard error that confuse tests on size of @file{conftest.err}.  The
+workaround is to specify @env{CC} when run configure with
+@code{CC='cc -Hnocopyr'}.
+
+@item
+Any earlier DG/UX system with ELF executables, such as R3.10 or
+R4.10, is also likely to work, but hasn't been explicitly tested.
+
+@item
+On Reliant Unix libtool has only been tested with the Siemens C-compiler
+and an old version of @command{gcc} provided by Marco Walther.
+
+@item
+@file{libtool.m4}, @file{ltdl.m4} and the @file{configure.ac} files are marked
+to use autoconf-mode, which is distributed with GNU Emacs 21, Autoconf itself,
+and all recent releases of XEmacs.
+
+@item
+When building on some GNU/Linux systems for multilib targets
+@command{libtool} sometimes guesses the wrong paths that the linker
+and dynamic linker search by default. If this occurs, you may override
+libtool's guesses at @command{configure} time by setting the
+@command{autoconf} cache variables
+@code{lt_cv_sys_lib_search_path_spec} and
+@code{lt_cv_sys_lib_dlsearch_path_spec} respectively to the correct search
+paths.
+
+@end itemize
diff --git a/doc/notes.txt b/doc/notes.txt
new file mode 100644
index 0000000..63673b8
--- /dev/null
+++ b/doc/notes.txt
@@ -0,0 +1,60 @@
+   * You currently need GNU make to build the Libtool package itself.
+
+   * On AIX there are two different styles of shared linking, one in
+     which symbols are bound at link-time and one in which symbols are
+     bound at runtime only, similar to ELF.  In case of doubt use
+     `LDFLAGS=-Wl,-brtl' for the latter style.
+
+   * On AIX, native tools are to be preferred over binutils; especially
+     for C++ code, if using the AIX Toolbox GCC 4.0 and binutils,
+     configure with `AR=/usr/bin/ar LD=/usr/bin/ld NM='/usr/bin/nm -B''.
+
+   * On AIX, the `/bin/sh' is very slow due to its inefficient handling
+     of here-documents.  A modern shell is preferable:
+          CONFIG_SHELL=/bin/bash; export $CONFIG_SHELL
+          $CONFIG_SHELL ./configure [...]
+
+   * For C++ code with templates, it may be necessary to specify the
+     way the compiler will generate the instantiations.  For Portland
+     pgCC version5, use `CXX='pgCC --one_instantiation_per_object'' and
+     avoid parallel `make'.
+
+   * On Darwin, for C++ code with templates you need two level shared
+     libraries.  Libtool builds these by default if
+     `MACOSX_DEPLOYMENT_TARGET' is set to 10.3 or later at `configure'
+     time.  See `rdar://problem/4135857' for more information on this
+     issue.
+
+   * The default shell on UNICOS 9, a ksh 88e variant, is too buggy to
+     correctly execute the libtool script.  Users are advised to
+     install a modern shell such as GNU bash.
+
+   * Some HP-UX `sed' programs are horribly broken, and cannot handle
+     libtool's requirements, so users may report unusual problems.
+     There is no workaround except to install a working `sed' (such as
+     GNU sed) on these systems.
+
+   * The vendor-distributed NCR MP-RAS `cc' programs emits copyright on
+     standard error that confuse tests on size of `conftest.err'.  The
+     workaround is to specify `CC' when run configure with `CC='cc
+     -Hnocopyr''.
+
+   * Any earlier DG/UX system with ELF executables, such as R3.10 or
+     R4.10, is also likely to work, but hasn't been explicitly tested.
+
+   * On Reliant Unix libtool has only been tested with the Siemens
+     C-compiler and an old version of `gcc' provided by Marco Walther.
+
+   * `libtool.m4', `ltdl.m4' and the `configure.ac' files are marked to
+     use autoconf-mode, which is distributed with GNU Emacs 21,
+     Autoconf itself, and all recent releases of XEmacs.
+
+   * When building on some GNU/Linux systems for multilib targets
+     `libtool' sometimes guesses the wrong paths that the linker and
+     dynamic linker search by default. If this occurs, you may override
+     libtool's guesses at `configure' time by setting the `autoconf'
+     cache variables `lt_cv_sys_lib_search_path_spec' and
+     `lt_cv_sys_lib_dlsearch_path_spec' respectively to the correct
+     search paths.
+
+
diff --git a/doc/stamp-vti b/doc/stamp-vti
new file mode 100644
index 0000000..8f161e0
--- /dev/null
+++ b/doc/stamp-vti
@@ -0,0 +1,4 @@
+@set UPDATED 17 October 2011
+@set UPDATED-MONTH October 2011
+@set EDITION 2.4.2
+@set VERSION 2.4.2
diff --git a/doc/version.texi b/doc/version.texi
new file mode 100644
index 0000000..8f161e0
--- /dev/null
+++ b/doc/version.texi
@@ -0,0 +1,4 @@
+@set UPDATED 17 October 2011
+@set UPDATED-MONTH October 2011
+@set EDITION 2.4.2
+@set VERSION 2.4.2
diff --git a/libltdl/COPYING.LIB b/libltdl/COPYING.LIB
new file mode 100644
index 0000000..ba2be48
--- /dev/null
+++ b/libltdl/COPYING.LIB
@@ -0,0 +1,515 @@
+
+                  GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations
+below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+^L
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it
+becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+^L
+                  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control
+compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+^L
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+^L
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+^L
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+^L
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply, and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License
+may add an explicit geographical distribution limitation excluding those
+countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+^L
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+                            NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+^L
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms
+of the ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.
+It is safest to attach them to the start of each source file to most
+effectively convey the exclusion of warranty; and each file should
+have at least the "copyright" line and a pointer to where the full
+notice is found.
+
+
+    <one line to give the library's name and a brief idea of what it
+does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA
+
+Also add information on how to contact you by electronic and paper
+mail.
+
+You should also get your employer (if you work as a programmer) or
+your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James
+Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!
+
+
diff --git a/libltdl/Makefile.am b/libltdl/Makefile.am
new file mode 100644
index 0000000..4a5e945
--- /dev/null
+++ b/libltdl/Makefile.am
@@ -0,0 +1,164 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+##   Written by Gary V. Vaughan, 2003
+##
+##   NOTE: The canonical source of this file is maintained with the
+##   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+##
+## GNU Libltdl is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2 of the License, or (at your option) any later version.
+##
+## As a special exception to the GNU Lesser General Public License,
+## if you distribute this file as part of a program or library that
+## is built using GNU libtool, you may include this file under the
+## same distribution terms that you use for the rest of that program.
+##
+## GNU Libltdl is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU LesserGeneral Public
+## License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+## copy can be downloaded from http://www.gnu.org/licenses/lgpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = foreign
+AM_CPPFLAGS =
+AM_LDFLAGS =
+BUILT_SOURCES =
+include_HEADERS =
+noinst_LTLIBRARIES =
+lib_LTLIBRARIES =
+EXTRA_LTLIBRARIES =
+EXTRA_DIST =
+CLEANFILES =
+MOSTLYCLEANFILES =
+
+# -I$(srcdir) is needed for user that built libltdl with a sub-Automake
+# (not as a sub-package!) using 'nostdinc':
+AM_CPPFLAGS	       += -DLT_CONFIG_H='<$(LT_CONFIG_H)>' \
+			  -DLTDL -I. -I$(srcdir) -Ilibltdl \
+			  -I$(srcdir)/libltdl -I$(srcdir)/libltdl
+AM_LDFLAGS	       += -no-undefined
+LTDL_VERSION_INFO	= -version-info 10:0:3
+
+noinst_LTLIBRARIES	+= $(LT_DLLOADERS)
+
+if INSTALL_LTDL
+ltdlincludedir		= $(includedir)/libltdl
+ltdlinclude_HEADERS	= libltdl/lt_system.h \
+			  libltdl/lt_error.h \
+			  libltdl/lt_dlloader.h
+include_HEADERS	       += ltdl.h
+lib_LTLIBRARIES	       += libltdl.la
+endif
+
+if CONVENIENCE_LTDL
+noinst_LTLIBRARIES     += libltdlc.la
+endif
+
+libltdl_la_SOURCES = libltdl/lt__alloc.h \
+			  libltdl/lt__dirent.h \
+			  libltdl/lt__glibc.h \
+			  libltdl/lt__private.h \
+			  libltdl/lt__strl.h \
+			  libltdl/lt_dlloader.h \
+			  libltdl/lt_error.h \
+	                  libltdl/lt_system.h \
+			  libltdl/slist.h \
+			  loaders/preopen.c \
+			  lt__alloc.c \
+			  lt_dlloader.c \
+			  lt_error.c \
+			  ltdl.c \
+			  ltdl.h \
+			  slist.c
+
+EXTRA_DIST	       += lt__dirent.c \
+			  lt__strl.c
+
+libltdl_la_CPPFLAGS	= -DLTDLOPEN=$(LTDLOPEN) $(AM_CPPFLAGS)
+libltdl_la_LDFLAGS	= $(AM_LDFLAGS) $(LTDL_VERSION_INFO) $(LT_DLPREOPEN)
+libltdl_la_LIBADD	= $(LTLIBOBJS)
+libltdl_la_DEPENDENCIES	= $(LT_DLLOADERS) $(LTLIBOBJS)
+
+libltdlc_la_SOURCES	= $(libltdl_la_SOURCES)
+libltdlc_la_CPPFLAGS	= -DLTDLOPEN=$(LTDLOPEN)c $(AM_CPPFLAGS)
+libltdlc_la_LDFLAGS	= $(AM_LDFLAGS) $(LT_DLPREOPEN)
+libltdlc_la_LIBADD	= $(libltdl_la_LIBADD)
+libltdlc_la_DEPENDENCIES= $(libltdl_la_DEPENDENCIES)
+
+## The loaders are preopened by libltdl, itself always built from
+## pic-objects (either as a shared library, or a convenience library),
+## so the loaders themselves must be made from pic-objects too.  We
+## use convenience libraries for that purpose:
+EXTRA_LTLIBRARIES	       += dlopen.la \
+				  dld_link.la \
+				  dyld.la \
+				  load_add_on.la \
+				  loadlibrary.la \
+				  shl_load.la
+
+dlopen_la_SOURCES	= loaders/dlopen.c
+dlopen_la_LDFLAGS	= -module -avoid-version
+dlopen_la_LIBADD 	= $(LIBADD_DLOPEN)
+
+dld_link_la_SOURCES	= loaders/dld_link.c
+dld_link_la_LDFLAGS	= -module -avoid-version
+dld_link_la_LIBADD	= -ldld
+
+dyld_la_SOURCES		= loaders/dyld.c
+dyld_la_LDFLAGS		= -module -avoid-version
+
+load_add_on_la_SOURCES	= loaders/load_add_on.c
+load_add_on_la_LDFLAGS	= -module -avoid-version
+
+loadlibrary_la_SOURCES	= loaders/loadlibrary.c
+loadlibrary_la_LDFLAGS	= -module -avoid-version
+
+shl_load_la_SOURCES	= loaders/shl_load.c
+shl_load_la_LDFLAGS	= -module -avoid-version
+shl_load_la_LIBADD	= $(LIBADD_SHL_LOAD)
+
+## Make sure these will be cleaned even when they're not built by default:
+CLEANFILES		       += libltdl.la \
+				  libltdlc.la \
+				  libdlloader.la
+
+## Automake-1.9.6 doesn't clean subdir AC_LIBOBJ compiled objects
+## automatically:
+CLEANFILES	       += $(LIBOBJS) $(LTLIBOBJS)
+
+EXTRA_DIST	       += COPYING.LIB \
+			  configure.ac \
+			  Makefile.am \
+			  aclocal.m4 \
+			  Makefile.in \
+			  configure \
+			  config-h.in \
+			  README
+
+## --------------------------- ##
+## Gnulib Makefile.am snippets ##
+## --------------------------- ##
+
+BUILT_SOURCES	+= $(ARGZ_H)
+EXTRA_DIST	+= argz_.h \
+		   argz.c
+
+# We need the following in order to create an <argz.h> when the system
+# doesn't have one that works with the given compiler.
+all-local $(lib_OBJECTS): $(ARGZ_H)
+argz.h: argz_.h
+	$(mkinstalldirs) . 
+	cp $(srcdir)/argz_.h $@-t
+	mv $@-t $@
+MOSTLYCLEANFILES += argz.h \
+		    argz.h-t
diff --git a/libltdl/Makefile.in b/libltdl/Makefile.in
new file mode 100644
index 0000000..daff330
--- /dev/null
+++ b/libltdl/Makefile.in
@@ -0,0 +1,1052 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@INSTALL_LTDL_TRUE@am__append_1 = ltdl.h
+@INSTALL_LTDL_TRUE@am__append_2 = libltdl.la
+@CONVENIENCE_LTDL_TRUE@am__append_3 = libltdlc.la
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(am__include_HEADERS_DIST) \
+	$(am__ltdlinclude_HEADERS_DIST) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/config-h.in \
+	$(top_srcdir)/configure COPYING.LIB argz.c config/compile \
+	config/config.guess config/config.sub config/depcomp \
+	config/install-sh config/ltmain.sh  \
+	config/missing  lt__dirent.c lt__strl.c
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/argz.m4 \
+	$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltdl.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" \
+	"$(DESTDIR)$(ltdlincludedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
+dld_link_la_DEPENDENCIES =
+am_dld_link_la_OBJECTS = dld_link.lo
+dld_link_la_OBJECTS = $(am_dld_link_la_OBJECTS)
+dld_link_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(dld_link_la_LDFLAGS) $(LDFLAGS) -o $@
+am__DEPENDENCIES_1 =
+dlopen_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_dlopen_la_OBJECTS = dlopen.lo
+dlopen_la_OBJECTS = $(am_dlopen_la_OBJECTS)
+dlopen_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(dlopen_la_LDFLAGS) $(LDFLAGS) -o $@
+dyld_la_LIBADD =
+am_dyld_la_OBJECTS = dyld.lo
+dyld_la_OBJECTS = $(am_dyld_la_OBJECTS)
+dyld_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(dyld_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
+am_libltdl_la_OBJECTS = libltdl_la-preopen.lo libltdl_la-lt__alloc.lo \
+	libltdl_la-lt_dlloader.lo libltdl_la-lt_error.lo \
+	libltdl_la-ltdl.lo libltdl_la-slist.lo
+libltdl_la_OBJECTS = $(am_libltdl_la_OBJECTS)
+libltdl_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdl_la_LDFLAGS) $(LDFLAGS) -o $@
+@INSTALL_LTDL_TRUE@am_libltdl_la_rpath = -rpath $(libdir)
+am__objects_1 = libltdlc_la-preopen.lo libltdlc_la-lt__alloc.lo \
+	libltdlc_la-lt_dlloader.lo libltdlc_la-lt_error.lo \
+	libltdlc_la-ltdl.lo libltdlc_la-slist.lo
+am_libltdlc_la_OBJECTS = $(am__objects_1)
+libltdlc_la_OBJECTS = $(am_libltdlc_la_OBJECTS)
+libltdlc_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libltdlc_la_LDFLAGS) $(LDFLAGS) -o $@
+@CONVENIENCE_LTDL_TRUE@am_libltdlc_la_rpath =
+load_add_on_la_LIBADD =
+am_load_add_on_la_OBJECTS = load_add_on.lo
+load_add_on_la_OBJECTS = $(am_load_add_on_la_OBJECTS)
+load_add_on_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(load_add_on_la_LDFLAGS) $(LDFLAGS) -o $@
+loadlibrary_la_LIBADD =
+am_loadlibrary_la_OBJECTS = loadlibrary.lo
+loadlibrary_la_OBJECTS = $(am_loadlibrary_la_OBJECTS)
+loadlibrary_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(loadlibrary_la_LDFLAGS) $(LDFLAGS) -o $@
+shl_load_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_shl_load_la_OBJECTS = shl_load.lo
+shl_load_la_OBJECTS = $(am_shl_load_la_OBJECTS)
+shl_load_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(shl_load_la_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/config/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(dld_link_la_SOURCES) $(dlopen_la_SOURCES) \
+	$(dyld_la_SOURCES) $(libltdl_la_SOURCES) \
+	$(libltdlc_la_SOURCES) $(load_add_on_la_SOURCES) \
+	$(loadlibrary_la_SOURCES) $(shl_load_la_SOURCES)
+DIST_SOURCES = $(dld_link_la_SOURCES) $(dlopen_la_SOURCES) \
+	$(dyld_la_SOURCES) $(libltdl_la_SOURCES) \
+	$(libltdlc_la_SOURCES) $(load_add_on_la_SOURCES) \
+	$(loadlibrary_la_SOURCES) $(shl_load_la_SOURCES)
+am__include_HEADERS_DIST = ltdl.h
+am__ltdlinclude_HEADERS_DIST = libltdl/lt_system.h libltdl/lt_error.h \
+	libltdl/lt_dlloader.h
+HEADERS = $(include_HEADERS) $(ltdlinclude_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+ARGZ_H = @ARGZ_H@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBADD_DL = @LIBADD_DL@
+LIBADD_DLD_LINK = @LIBADD_DLD_LINK@
+LIBADD_DLOPEN = @LIBADD_DLOPEN@
+LIBADD_SHL_LOAD = @LIBADD_SHL_LOAD@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTDLOPEN = @LTDLOPEN@
+LTLIBOBJS = @LTLIBOBJS@
+LT_CONFIG_H = @LT_CONFIG_H@
+LT_DLLOADERS = @LT_DLLOADERS@
+LT_DLPREOPEN = @LT_DLPREOPEN@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sys_symbol_underscore = @sys_symbol_underscore@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = foreign
+
+# -I$(srcdir) is needed for user that built libltdl with a sub-Automake
+# (not as a sub-package!) using 'nostdinc':
+AM_CPPFLAGS = -DLT_CONFIG_H='<$(LT_CONFIG_H)>' -DLTDL -I. -I$(srcdir) \
+	-Ilibltdl -I$(srcdir)/libltdl -I$(srcdir)/libltdl
+AM_LDFLAGS = -no-undefined
+BUILT_SOURCES = $(ARGZ_H)
+include_HEADERS = $(am__append_1)
+noinst_LTLIBRARIES = $(LT_DLLOADERS) $(am__append_3)
+lib_LTLIBRARIES = $(am__append_2)
+EXTRA_LTLIBRARIES = dlopen.la dld_link.la dyld.la load_add_on.la \
+	loadlibrary.la shl_load.la
+EXTRA_DIST = lt__dirent.c lt__strl.c COPYING.LIB configure.ac \
+	Makefile.am aclocal.m4 Makefile.in configure config-h.in \
+	README argz_.h argz.c
+CLEANFILES = libltdl.la libltdlc.la libdlloader.la $(LIBOBJS) \
+	$(LTLIBOBJS)
+MOSTLYCLEANFILES = argz.h argz.h-t
+LTDL_VERSION_INFO = -version-info 10:0:3
+@INSTALL_LTDL_TRUE@ltdlincludedir = $(includedir)/libltdl
+@INSTALL_LTDL_TRUE@ltdlinclude_HEADERS = libltdl/lt_system.h \
+@INSTALL_LTDL_TRUE@			  libltdl/lt_error.h \
+@INSTALL_LTDL_TRUE@			  libltdl/lt_dlloader.h
+
+libltdl_la_SOURCES = libltdl/lt__alloc.h \
+			  libltdl/lt__dirent.h \
+			  libltdl/lt__glibc.h \
+			  libltdl/lt__private.h \
+			  libltdl/lt__strl.h \
+			  libltdl/lt_dlloader.h \
+			  libltdl/lt_error.h \
+	                  libltdl/lt_system.h \
+			  libltdl/slist.h \
+			  loaders/preopen.c \
+			  lt__alloc.c \
+			  lt_dlloader.c \
+			  lt_error.c \
+			  ltdl.c \
+			  ltdl.h \
+			  slist.c
+
+libltdl_la_CPPFLAGS = -DLTDLOPEN=$(LTDLOPEN) $(AM_CPPFLAGS)
+libltdl_la_LDFLAGS = $(AM_LDFLAGS) $(LTDL_VERSION_INFO) $(LT_DLPREOPEN)
+libltdl_la_LIBADD = $(LTLIBOBJS)
+libltdl_la_DEPENDENCIES = $(LT_DLLOADERS) $(LTLIBOBJS)
+libltdlc_la_SOURCES = $(libltdl_la_SOURCES)
+libltdlc_la_CPPFLAGS = -DLTDLOPEN=$(LTDLOPEN)c $(AM_CPPFLAGS)
+libltdlc_la_LDFLAGS = $(AM_LDFLAGS) $(LT_DLPREOPEN)
+libltdlc_la_LIBADD = $(libltdl_la_LIBADD)
+libltdlc_la_DEPENDENCIES = $(libltdl_la_DEPENDENCIES)
+dlopen_la_SOURCES = loaders/dlopen.c
+dlopen_la_LDFLAGS = -module -avoid-version
+dlopen_la_LIBADD = $(LIBADD_DLOPEN)
+dld_link_la_SOURCES = loaders/dld_link.c
+dld_link_la_LDFLAGS = -module -avoid-version
+dld_link_la_LIBADD = -ldld
+dyld_la_SOURCES = loaders/dyld.c
+dyld_la_LDFLAGS = -module -avoid-version
+load_add_on_la_SOURCES = loaders/load_add_on.c
+load_add_on_la_LDFLAGS = -module -avoid-version
+loadlibrary_la_SOURCES = loaders/loadlibrary.c
+loadlibrary_la_LDFLAGS = -module -avoid-version
+shl_load_la_SOURCES = loaders/shl_load.c
+shl_load_la_LDFLAGS = -module -avoid-version
+shl_load_la_LIBADD = $(LIBADD_SHL_LOAD)
+all: $(BUILT_SOURCES) config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config-h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config-h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+dld_link.la: $(dld_link_la_OBJECTS) $(dld_link_la_DEPENDENCIES) 
+	$(dld_link_la_LINK)  $(dld_link_la_OBJECTS) $(dld_link_la_LIBADD) $(LIBS)
+dlopen.la: $(dlopen_la_OBJECTS) $(dlopen_la_DEPENDENCIES) 
+	$(dlopen_la_LINK)  $(dlopen_la_OBJECTS) $(dlopen_la_LIBADD) $(LIBS)
+dyld.la: $(dyld_la_OBJECTS) $(dyld_la_DEPENDENCIES) 
+	$(dyld_la_LINK)  $(dyld_la_OBJECTS) $(dyld_la_LIBADD) $(LIBS)
+libltdl.la: $(libltdl_la_OBJECTS) $(libltdl_la_DEPENDENCIES) 
+	$(libltdl_la_LINK) $(am_libltdl_la_rpath) $(libltdl_la_OBJECTS) $(libltdl_la_LIBADD) $(LIBS)
+libltdlc.la: $(libltdlc_la_OBJECTS) $(libltdlc_la_DEPENDENCIES) 
+	$(libltdlc_la_LINK) $(am_libltdlc_la_rpath) $(libltdlc_la_OBJECTS) $(libltdlc_la_LIBADD) $(LIBS)
+load_add_on.la: $(load_add_on_la_OBJECTS) $(load_add_on_la_DEPENDENCIES) 
+	$(load_add_on_la_LINK)  $(load_add_on_la_OBJECTS) $(load_add_on_la_LIBADD) $(LIBS)
+loadlibrary.la: $(loadlibrary_la_OBJECTS) $(loadlibrary_la_DEPENDENCIES) 
+	$(loadlibrary_la_LINK)  $(loadlibrary_la_OBJECTS) $(loadlibrary_la_LIBADD) $(LIBS)
+shl_load.la: $(shl_load_la_OBJECTS) $(shl_load_la_DEPENDENCIES) 
+	$(shl_load_la_LINK)  $(shl_load_la_OBJECTS) $(shl_load_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/argz.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/lt__dirent.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/lt__strl.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dld_link.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dlopen.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyld.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdl_la-lt__alloc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdl_la-lt_dlloader.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdl_la-lt_error.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdl_la-ltdl.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdl_la-preopen.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdl_la-slist.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdlc_la-lt__alloc.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdlc_la-lt_dlloader.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdlc_la-lt_error.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdlc_la-ltdl.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdlc_la-preopen.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libltdlc_la-slist.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/load_add_on.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loadlibrary.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/shl_load.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+
+dld_link.lo: loaders/dld_link.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dld_link.lo -MD -MP -MF $(DEPDIR)/dld_link.Tpo -c -o dld_link.lo `test -f 'loaders/dld_link.c' || echo '$(srcdir)/'`loaders/dld_link.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dld_link.Tpo $(DEPDIR)/dld_link.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='loaders/dld_link.c' object='dld_link.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dld_link.lo `test -f 'loaders/dld_link.c' || echo '$(srcdir)/'`loaders/dld_link.c
+
+dlopen.lo: loaders/dlopen.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dlopen.lo -MD -MP -MF $(DEPDIR)/dlopen.Tpo -c -o dlopen.lo `test -f 'loaders/dlopen.c' || echo '$(srcdir)/'`loaders/dlopen.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dlopen.Tpo $(DEPDIR)/dlopen.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='loaders/dlopen.c' object='dlopen.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dlopen.lo `test -f 'loaders/dlopen.c' || echo '$(srcdir)/'`loaders/dlopen.c
+
+dyld.lo: loaders/dyld.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT dyld.lo -MD -MP -MF $(DEPDIR)/dyld.Tpo -c -o dyld.lo `test -f 'loaders/dyld.c' || echo '$(srcdir)/'`loaders/dyld.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/dyld.Tpo $(DEPDIR)/dyld.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='loaders/dyld.c' object='dyld.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o dyld.lo `test -f 'loaders/dyld.c' || echo '$(srcdir)/'`loaders/dyld.c
+
+libltdl_la-preopen.lo: loaders/preopen.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl_la-preopen.lo -MD -MP -MF $(DEPDIR)/libltdl_la-preopen.Tpo -c -o libltdl_la-preopen.lo `test -f 'loaders/preopen.c' || echo '$(srcdir)/'`loaders/preopen.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdl_la-preopen.Tpo $(DEPDIR)/libltdl_la-preopen.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='loaders/preopen.c' object='libltdl_la-preopen.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl_la-preopen.lo `test -f 'loaders/preopen.c' || echo '$(srcdir)/'`loaders/preopen.c
+
+libltdl_la-lt__alloc.lo: lt__alloc.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl_la-lt__alloc.lo -MD -MP -MF $(DEPDIR)/libltdl_la-lt__alloc.Tpo -c -o libltdl_la-lt__alloc.lo `test -f 'lt__alloc.c' || echo '$(srcdir)/'`lt__alloc.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdl_la-lt__alloc.Tpo $(DEPDIR)/libltdl_la-lt__alloc.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lt__alloc.c' object='libltdl_la-lt__alloc.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl_la-lt__alloc.lo `test -f 'lt__alloc.c' || echo '$(srcdir)/'`lt__alloc.c
+
+libltdl_la-lt_dlloader.lo: lt_dlloader.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl_la-lt_dlloader.lo -MD -MP -MF $(DEPDIR)/libltdl_la-lt_dlloader.Tpo -c -o libltdl_la-lt_dlloader.lo `test -f 'lt_dlloader.c' || echo '$(srcdir)/'`lt_dlloader.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdl_la-lt_dlloader.Tpo $(DEPDIR)/libltdl_la-lt_dlloader.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lt_dlloader.c' object='libltdl_la-lt_dlloader.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl_la-lt_dlloader.lo `test -f 'lt_dlloader.c' || echo '$(srcdir)/'`lt_dlloader.c
+
+libltdl_la-lt_error.lo: lt_error.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl_la-lt_error.lo -MD -MP -MF $(DEPDIR)/libltdl_la-lt_error.Tpo -c -o libltdl_la-lt_error.lo `test -f 'lt_error.c' || echo '$(srcdir)/'`lt_error.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdl_la-lt_error.Tpo $(DEPDIR)/libltdl_la-lt_error.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lt_error.c' object='libltdl_la-lt_error.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl_la-lt_error.lo `test -f 'lt_error.c' || echo '$(srcdir)/'`lt_error.c
+
+libltdl_la-ltdl.lo: ltdl.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl_la-ltdl.lo -MD -MP -MF $(DEPDIR)/libltdl_la-ltdl.Tpo -c -o libltdl_la-ltdl.lo `test -f 'ltdl.c' || echo '$(srcdir)/'`ltdl.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdl_la-ltdl.Tpo $(DEPDIR)/libltdl_la-ltdl.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ltdl.c' object='libltdl_la-ltdl.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl_la-ltdl.lo `test -f 'ltdl.c' || echo '$(srcdir)/'`ltdl.c
+
+libltdl_la-slist.lo: slist.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdl_la-slist.lo -MD -MP -MF $(DEPDIR)/libltdl_la-slist.Tpo -c -o libltdl_la-slist.lo `test -f 'slist.c' || echo '$(srcdir)/'`slist.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdl_la-slist.Tpo $(DEPDIR)/libltdl_la-slist.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='slist.c' object='libltdl_la-slist.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdl_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdl_la-slist.lo `test -f 'slist.c' || echo '$(srcdir)/'`slist.c
+
+libltdlc_la-preopen.lo: loaders/preopen.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdlc_la-preopen.lo -MD -MP -MF $(DEPDIR)/libltdlc_la-preopen.Tpo -c -o libltdlc_la-preopen.lo `test -f 'loaders/preopen.c' || echo '$(srcdir)/'`loaders/preopen.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdlc_la-preopen.Tpo $(DEPDIR)/libltdlc_la-preopen.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='loaders/preopen.c' object='libltdlc_la-preopen.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdlc_la-preopen.lo `test -f 'loaders/preopen.c' || echo '$(srcdir)/'`loaders/preopen.c
+
+libltdlc_la-lt__alloc.lo: lt__alloc.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdlc_la-lt__alloc.lo -MD -MP -MF $(DEPDIR)/libltdlc_la-lt__alloc.Tpo -c -o libltdlc_la-lt__alloc.lo `test -f 'lt__alloc.c' || echo '$(srcdir)/'`lt__alloc.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdlc_la-lt__alloc.Tpo $(DEPDIR)/libltdlc_la-lt__alloc.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lt__alloc.c' object='libltdlc_la-lt__alloc.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdlc_la-lt__alloc.lo `test -f 'lt__alloc.c' || echo '$(srcdir)/'`lt__alloc.c
+
+libltdlc_la-lt_dlloader.lo: lt_dlloader.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdlc_la-lt_dlloader.lo -MD -MP -MF $(DEPDIR)/libltdlc_la-lt_dlloader.Tpo -c -o libltdlc_la-lt_dlloader.lo `test -f 'lt_dlloader.c' || echo '$(srcdir)/'`lt_dlloader.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdlc_la-lt_dlloader.Tpo $(DEPDIR)/libltdlc_la-lt_dlloader.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lt_dlloader.c' object='libltdlc_la-lt_dlloader.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdlc_la-lt_dlloader.lo `test -f 'lt_dlloader.c' || echo '$(srcdir)/'`lt_dlloader.c
+
+libltdlc_la-lt_error.lo: lt_error.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdlc_la-lt_error.lo -MD -MP -MF $(DEPDIR)/libltdlc_la-lt_error.Tpo -c -o libltdlc_la-lt_error.lo `test -f 'lt_error.c' || echo '$(srcdir)/'`lt_error.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdlc_la-lt_error.Tpo $(DEPDIR)/libltdlc_la-lt_error.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lt_error.c' object='libltdlc_la-lt_error.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdlc_la-lt_error.lo `test -f 'lt_error.c' || echo '$(srcdir)/'`lt_error.c
+
+libltdlc_la-ltdl.lo: ltdl.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdlc_la-ltdl.lo -MD -MP -MF $(DEPDIR)/libltdlc_la-ltdl.Tpo -c -o libltdlc_la-ltdl.lo `test -f 'ltdl.c' || echo '$(srcdir)/'`ltdl.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdlc_la-ltdl.Tpo $(DEPDIR)/libltdlc_la-ltdl.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='ltdl.c' object='libltdlc_la-ltdl.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdlc_la-ltdl.lo `test -f 'ltdl.c' || echo '$(srcdir)/'`ltdl.c
+
+libltdlc_la-slist.lo: slist.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libltdlc_la-slist.lo -MD -MP -MF $(DEPDIR)/libltdlc_la-slist.Tpo -c -o libltdlc_la-slist.lo `test -f 'slist.c' || echo '$(srcdir)/'`slist.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libltdlc_la-slist.Tpo $(DEPDIR)/libltdlc_la-slist.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='slist.c' object='libltdlc_la-slist.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libltdlc_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libltdlc_la-slist.lo `test -f 'slist.c' || echo '$(srcdir)/'`slist.c
+
+load_add_on.lo: loaders/load_add_on.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT load_add_on.lo -MD -MP -MF $(DEPDIR)/load_add_on.Tpo -c -o load_add_on.lo `test -f 'loaders/load_add_on.c' || echo '$(srcdir)/'`loaders/load_add_on.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/load_add_on.Tpo $(DEPDIR)/load_add_on.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='loaders/load_add_on.c' object='load_add_on.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o load_add_on.lo `test -f 'loaders/load_add_on.c' || echo '$(srcdir)/'`loaders/load_add_on.c
+
+loadlibrary.lo: loaders/loadlibrary.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT loadlibrary.lo -MD -MP -MF $(DEPDIR)/loadlibrary.Tpo -c -o loadlibrary.lo `test -f 'loaders/loadlibrary.c' || echo '$(srcdir)/'`loaders/loadlibrary.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/loadlibrary.Tpo $(DEPDIR)/loadlibrary.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='loaders/loadlibrary.c' object='loadlibrary.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o loadlibrary.lo `test -f 'loaders/loadlibrary.c' || echo '$(srcdir)/'`loaders/loadlibrary.c
+
+shl_load.lo: loaders/shl_load.c
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT shl_load.lo -MD -MP -MF $(DEPDIR)/shl_load.Tpo -c -o shl_load.lo `test -f 'loaders/shl_load.c' || echo '$(srcdir)/'`loaders/shl_load.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/shl_load.Tpo $(DEPDIR)/shl_load.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='loaders/shl_load.c' object='shl_load.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o shl_load.lo `test -f 'loaders/shl_load.c' || echo '$(srcdir)/'`loaders/shl_load.c
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(includedir)" && rm -f $$files
+install-ltdlincludeHEADERS: $(ltdlinclude_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(ltdlincludedir)" || $(MKDIR_P) "$(DESTDIR)$(ltdlincludedir)"
+	@list='$(ltdlinclude_HEADERS)'; test -n "$(ltdlincludedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(ltdlincludedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(ltdlincludedir)" || exit $$?; \
+	done
+
+uninstall-ltdlincludeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(ltdlinclude_HEADERS)'; test -n "$(ltdlincludedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(ltdlincludedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(ltdlincludedir)" && rm -f $$files
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES) config-h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config-h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) config-h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS) config-h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile $(LTLIBRARIES) $(HEADERS) config.h
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(ltdlincludedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	clean-noinstLTLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(DEPDIR) ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS install-ltdlincludeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf $(DEPDIR) ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-includeHEADERS uninstall-libLTLIBRARIES \
+	uninstall-ltdlincludeHEADERS
+
+.MAKE: all check install install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-generic clean-libLTLIBRARIES clean-libtool \
+	clean-noinstLTLIBRARIES ctags dist dist-all dist-bzip2 \
+	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+	distcheck distclean distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-tags distcleancheck \
+	distdir distuninstallcheck dvi dvi-am html html-am info \
+	info-am install install-am install-data install-data-am \
+	install-dvi install-dvi-am install-exec install-exec-am \
+	install-html install-html-am install-includeHEADERS \
+	install-info install-info-am install-libLTLIBRARIES \
+	install-ltdlincludeHEADERS install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES uninstall-ltdlincludeHEADERS
+
+
+# We need the following in order to create an <argz.h> when the system
+# doesn't have one that works with the given compiler.
+all-local $(lib_OBJECTS): $(ARGZ_H)
+argz.h: argz_.h
+	$(mkinstalldirs) . 
+	cp $(srcdir)/argz_.h $@-t
+	mv $@-t $@
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libltdl/Makefile.inc b/libltdl/Makefile.inc
new file mode 100644
index 0000000..adf2aad
--- /dev/null
+++ b/libltdl/Makefile.inc
@@ -0,0 +1,153 @@
+## Makefile.inc -- includable Makefile.am snippet
+##
+##   Copyright (C) 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+##   Written by Gary V. Vaughan, 2003
+##
+##   NOTE: The canonical source of this file is maintained with the
+##   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+##
+## GNU Libltdl is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2 of the License, or (at your option) any later version.
+##
+## As a special exception to the GNU Lesser General Public License,
+## if you distribute this file as part of a program or library that
+## is built using GNU libtool, you may include this file under the
+## same distribution terms that you use for the rest of that program.
+##
+## GNU Libltdl is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU LesserGeneral Public
+## License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+## copy can be downloaded from http://www.gnu.org/licenses/lgpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+## DO NOT REMOVE THIS LINE -- make depends on it
+
+# -I$(srcdir) is needed for user that built libltdl with a sub-Automake
+# (not as a sub-package!) using 'nostdinc':
+AM_CPPFLAGS	       += -DLT_CONFIG_H='<$(LT_CONFIG_H)>' \
+			  -DLTDL -I. -I$(srcdir) -Ilibltdl \
+			  -I$(srcdir)/libltdl -I$(srcdir)/libltdl/libltdl
+AM_LDFLAGS	       += -no-undefined
+LTDL_VERSION_INFO	= -version-info 10:0:3
+
+noinst_LTLIBRARIES	+= $(LT_DLLOADERS)
+
+if INSTALL_LTDL
+ltdlincludedir		= $(includedir)/libltdl
+ltdlinclude_HEADERS	= libltdl/libltdl/lt_system.h \
+			  libltdl/libltdl/lt_error.h \
+			  libltdl/libltdl/lt_dlloader.h
+include_HEADERS	       += libltdl/ltdl.h
+lib_LTLIBRARIES	       += libltdl/libltdl.la
+endif
+
+if CONVENIENCE_LTDL
+noinst_LTLIBRARIES     += libltdl/libltdlc.la
+endif
+
+libltdl_libltdl_la_SOURCES = libltdl/libltdl/lt__alloc.h \
+			  libltdl/libltdl/lt__dirent.h \
+			  libltdl/libltdl/lt__glibc.h \
+			  libltdl/libltdl/lt__private.h \
+			  libltdl/libltdl/lt__strl.h \
+			  libltdl/libltdl/lt_dlloader.h \
+			  libltdl/libltdl/lt_error.h \
+	                  libltdl/libltdl/lt_system.h \
+			  libltdl/libltdl/slist.h \
+			  libltdl/loaders/preopen.c \
+			  libltdl/lt__alloc.c \
+			  libltdl/lt_dlloader.c \
+			  libltdl/lt_error.c \
+			  libltdl/ltdl.c \
+			  libltdl/ltdl.h \
+			  libltdl/slist.c
+
+EXTRA_DIST	       += libltdl/lt__dirent.c \
+			  libltdl/lt__strl.c
+
+libltdl_libltdl_la_CPPFLAGS	= -DLTDLOPEN=$(LTDLOPEN) $(AM_CPPFLAGS)
+libltdl_libltdl_la_LDFLAGS	= $(AM_LDFLAGS) $(LTDL_VERSION_INFO) $(LT_DLPREOPEN)
+libltdl_libltdl_la_LIBADD	= $(LTLIBOBJS)
+libltdl_libltdl_la_DEPENDENCIES	= $(LT_DLLOADERS) $(LTLIBOBJS)
+
+libltdl_libltdlc_la_SOURCES	= $(libltdl_libltdl_la_SOURCES)
+libltdl_libltdlc_la_CPPFLAGS	= -DLTDLOPEN=$(LTDLOPEN)c $(AM_CPPFLAGS)
+libltdl_libltdlc_la_LDFLAGS	= $(AM_LDFLAGS) $(LT_DLPREOPEN)
+libltdl_libltdlc_la_LIBADD	= $(libltdl_libltdl_la_LIBADD)
+libltdl_libltdlc_la_DEPENDENCIES= $(libltdl_libltdl_la_DEPENDENCIES)
+
+## The loaders are preopened by libltdl, itself always built from
+## pic-objects (either as a shared library, or a convenience library),
+## so the loaders themselves must be made from pic-objects too.  We
+## use convenience libraries for that purpose:
+EXTRA_LTLIBRARIES	       += libltdl/dlopen.la \
+				  libltdl/dld_link.la \
+				  libltdl/dyld.la \
+				  libltdl/load_add_on.la \
+				  libltdl/loadlibrary.la \
+				  libltdl/shl_load.la
+
+libltdl_dlopen_la_SOURCES	= libltdl/loaders/dlopen.c
+libltdl_dlopen_la_LDFLAGS	= -module -avoid-version
+libltdl_dlopen_la_LIBADD 	= $(LIBADD_DLOPEN)
+
+libltdl_dld_link_la_SOURCES	= libltdl/loaders/dld_link.c
+libltdl_dld_link_la_LDFLAGS	= -module -avoid-version
+libltdl_dld_link_la_LIBADD	= -ldld
+
+libltdl_dyld_la_SOURCES		= libltdl/loaders/dyld.c
+libltdl_dyld_la_LDFLAGS		= -module -avoid-version
+
+libltdl_load_add_on_la_SOURCES	= libltdl/loaders/load_add_on.c
+libltdl_load_add_on_la_LDFLAGS	= -module -avoid-version
+
+libltdl_loadlibrary_la_SOURCES	= libltdl/loaders/loadlibrary.c
+libltdl_loadlibrary_la_LDFLAGS	= -module -avoid-version
+
+libltdl_shl_load_la_SOURCES	= libltdl/loaders/shl_load.c
+libltdl_shl_load_la_LDFLAGS	= -module -avoid-version
+libltdl_shl_load_la_LIBADD	= $(LIBADD_SHL_LOAD)
+
+## Make sure these will be cleaned even when they're not built by default:
+CLEANFILES		       += libltdl/libltdl.la \
+				  libltdl/libltdlc.la \
+				  libltdl/libdlloader.la
+
+## Automake-1.9.6 doesn't clean subdir AC_LIBOBJ compiled objects
+## automatically:
+CLEANFILES	       += $(LIBOBJS) $(LTLIBOBJS)
+
+EXTRA_DIST	       += libltdl/COPYING.LIB \
+			  libltdl/configure.ac \
+			  libltdl/Makefile.am \
+			  libltdl/aclocal.m4 \
+			  libltdl/Makefile.in \
+			  libltdl/configure \
+			  libltdl/config-h.in \
+			  libltdl/README
+
+## --------------------------- ##
+## Gnulib Makefile.am snippets ##
+## --------------------------- ##
+
+BUILT_SOURCES	+= libltdl/$(ARGZ_H)
+EXTRA_DIST	+= libltdl/argz_.h \
+		   libltdl/argz.c
+
+# We need the following in order to create an <argz.h> when the system
+# doesn't have one that works with the given compiler.
+all-local $(lib_OBJECTS): libltdl/$(ARGZ_H)
+libltdl/argz.h: libltdl/argz_.h
+	$(mkinstalldirs) . libltdl/
+	cp $(srcdir)/libltdl/argz_.h $@-t
+	mv $@-t $@
+MOSTLYCLEANFILES += libltdl/argz.h \
+		    libltdl/argz.h-t
diff --git a/libltdl/README b/libltdl/README
new file mode 100644
index 0000000..90a0aef
--- /dev/null
+++ b/libltdl/README
@@ -0,0 +1,20 @@
+This is GNU libltdl, a system independent dlopen wrapper for GNU libtool.
+
+It supports the following dlopen interfaces:
+* dlopen (POSIX)
+* shl_load (HP-UX)
+* LoadLibrary (Win16 and Win32)
+* load_add_on (BeOS)
+* GNU DLD (emulates dynamic linking for static libraries)
+* dyld (darwin/Mac OS X)
+* libtool's dlpreopen
+--
+   Copyright (C) 1999, 2003, 2011 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1999
+
+   This file is part of GNU Libtool.
+
+Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.
diff --git a/libltdl/aclocal.m4 b/libltdl/aclocal.m4
new file mode 100644
index 0000000..ca56e93
--- /dev/null
+++ b/libltdl/aclocal.m4
@@ -0,0 +1,958 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/argz.m4])
+m4_include([m4/libtool.m4])
+m4_include([m4/ltdl.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
diff --git a/libltdl/argz.c b/libltdl/argz.c
new file mode 100644
index 0000000..8567723
--- /dev/null
+++ b/libltdl/argz.c
@@ -0,0 +1,226 @@
+/* argz.c -- argz implementation for non-glibc systems
+
+   Copyright (C) 2004, 2006, 2007, 2008 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#if defined(LTDL) && defined LT_CONFIG_H
+#  include LT_CONFIG_H
+#else
+#  include <config.h>
+#endif
+
+#include <argz.h>
+
+#include <assert.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <sys/types.h>
+#include <errno.h>
+#include <string.h>
+
+#define EOS_CHAR '\0'
+
+error_t
+argz_append (char **pargz, size_t *pargz_len, const char *buf, size_t buf_len)
+{
+  size_t argz_len;
+  char  *argz;
+
+  assert (pargz);
+  assert (pargz_len);
+  assert ((*pargz && *pargz_len) || (!*pargz && !*pargz_len));
+
+  /* If nothing needs to be appended, no more work is required.  */
+  if (buf_len == 0)
+    return 0;
+
+  /* Ensure there is enough room to append BUF_LEN.  */
+  argz_len = *pargz_len + buf_len;
+  argz = (char *) realloc (*pargz, argz_len);
+  if (!argz)
+    return ENOMEM;
+
+  /* Copy characters from BUF after terminating '\0' in ARGZ.  */
+  memcpy (argz + *pargz_len, buf, buf_len);
+
+  /* Assign new values.  */
+  *pargz = argz;
+  *pargz_len = argz_len;
+
+  return 0;
+}
+
+
+error_t
+argz_create_sep (const char *str, int delim, char **pargz, size_t *pargz_len)
+{
+  size_t argz_len;
+  char *argz = 0;
+
+  assert (str);
+  assert (pargz);
+  assert (pargz_len);
+
+  /* Make a copy of STR, but replacing each occurrence of
+     DELIM with '\0'.  */
+  argz_len = 1+ strlen (str);
+  if (argz_len)
+    {
+      const char *p;
+      char *q;
+
+      argz = (char *) malloc (argz_len);
+      if (!argz)
+	return ENOMEM;
+
+      for (p = str, q = argz; *p != EOS_CHAR; ++p)
+	{
+	  if (*p == delim)
+	    {
+	      /* Ignore leading delimiters, and fold consecutive
+		 delimiters in STR into a single '\0' in ARGZ.  */
+	      if ((q > argz) && (q[-1] != EOS_CHAR))
+		*q++ = EOS_CHAR;
+	      else
+		--argz_len;
+	    }
+	  else
+	    *q++ = *p;
+	}
+      /* Copy terminating EOS_CHAR.  */
+      *q = *p;
+    }
+
+  /* If ARGZ_LEN has shrunk to nothing, release ARGZ's memory.  */
+  if (!argz_len)
+    argz = (free (argz), (char *) 0);
+
+  /* Assign new values.  */
+  *pargz = argz;
+  *pargz_len = argz_len;
+
+  return 0;
+}
+
+
+error_t
+argz_insert (char **pargz, size_t *pargz_len, char *before, const char *entry)
+{
+  assert (pargz);
+  assert (pargz_len);
+  assert (entry && *entry);
+
+  /* No BEFORE address indicates ENTRY should be inserted after the
+     current last element.  */
+  if (!before)
+    return argz_append (pargz, pargz_len, entry, 1+ strlen (entry));
+
+  /* This probably indicates a programmer error, but to preserve
+     semantics, scan back to the start of an entry if BEFORE points
+     into the middle of it.  */
+  while ((before > *pargz) && (before[-1] != EOS_CHAR))
+    --before;
+
+  {
+    size_t entry_len	= 1+ strlen (entry);
+    size_t argz_len	= *pargz_len + entry_len;
+    size_t offset	= before - *pargz;
+    char   *argz	= (char *) realloc (*pargz, argz_len);
+
+    if (!argz)
+      return ENOMEM;
+
+    /* Make BEFORE point to the equivalent offset in ARGZ that it
+       used to have in *PARGZ incase realloc() moved the block.  */
+    before = argz + offset;
+
+    /* Move the ARGZ entries starting at BEFORE up into the new
+       space at the end -- making room to copy ENTRY into the
+       resulting gap.  */
+    memmove (before + entry_len, before, *pargz_len - offset);
+    memcpy  (before, entry, entry_len);
+
+    /* Assign new values.  */
+    *pargz = argz;
+    *pargz_len = argz_len;
+  }
+
+  return 0;
+}
+
+
+char *
+argz_next (char *argz, size_t argz_len, const char *entry)
+{
+  assert ((argz && argz_len) || (!argz && !argz_len));
+
+  if (entry)
+    {
+      /* Either ARGZ/ARGZ_LEN is empty, or ENTRY points into an address
+	 within the ARGZ vector.  */
+      assert ((!argz && !argz_len)
+	      || ((argz <= entry) && (entry < (argz + argz_len))));
+
+      /* Move to the char immediately after the terminating
+	 '\0' of ENTRY.  */
+      entry = 1+ strchr (entry, EOS_CHAR);
+
+      /* Return either the new ENTRY, or else NULL if ARGZ is
+	 exhausted.  */
+      return (entry >= argz + argz_len) ? 0 : (char *) entry;
+    }
+  else
+    {
+      /* This should probably be flagged as a programmer error,
+	 since starting an argz_next loop with the iterator set
+	 to ARGZ is safer.  To preserve semantics, handle the NULL
+	 case by returning the start of ARGZ (if any).  */
+      if (argz_len > 0)
+	return argz;
+      else
+	return 0;
+    }
+}
+
+
+void
+argz_stringify (char *argz, size_t argz_len, int sep)
+{
+  assert ((argz && argz_len) || (!argz && !argz_len));
+
+  if (sep)
+    {
+      --argz_len;		/* don't stringify the terminating EOS */
+      while (--argz_len > 0)
+	{
+	  if (argz[argz_len] == EOS_CHAR)
+	    argz[argz_len] = sep;
+	}
+    }
+}
+
diff --git a/libltdl/argz_.h b/libltdl/argz_.h
new file mode 100644
index 0000000..0557575
--- /dev/null
+++ b/libltdl/argz_.h
@@ -0,0 +1,68 @@
+/* lt__argz.h -- internal argz interface for non-glibc systems
+
+   Copyright (C) 2004, 2007, 2008 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA
+*/
+
+#if !defined(LT__ARGZ_H)
+#define LT__ARGZ_H 1
+
+#include <stdlib.h>
+#define __need_error_t
+#include <errno.h>
+#include <sys/types.h>
+
+#if defined(LTDL)
+#  include "lt__glibc.h"
+#  include "lt_system.h"
+#else
+#  define LT_SCOPE
+#endif
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+LT_SCOPE error_t argz_append	(char **pargz, size_t *pargz_len,
+				 const char *buf, size_t buf_len);
+LT_SCOPE error_t argz_create_sep(const char *str, int delim,
+				 char **pargz, size_t *pargz_len);
+LT_SCOPE error_t argz_insert	(char **pargz, size_t *pargz_len,
+				 char *before, const char *entry);
+LT_SCOPE char *	 argz_next	(char *argz, size_t argz_len,
+				 const char *entry);
+LT_SCOPE void	 argz_stringify	(char *argz, size_t argz_len, int sep);
+
+#if defined(__cplusplus)
+}
+#endif
+
+#if !defined(LTDL)
+#  undef LT_SCOPE
+#endif
+
+#endif /*!defined(LT__ARGZ_H)*/
diff --git a/libltdl/config-h.in b/libltdl/config-h.in
new file mode 100644
index 0000000..23eab00
--- /dev/null
+++ b/libltdl/config-h.in
@@ -0,0 +1,178 @@
+/* config-h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to 1 if you have the `argz_add' function. */
+#undef HAVE_ARGZ_ADD
+
+/* Define to 1 if you have the `argz_append' function. */
+#undef HAVE_ARGZ_APPEND
+
+/* Define to 1 if you have the `argz_count' function. */
+#undef HAVE_ARGZ_COUNT
+
+/* Define to 1 if you have the `argz_create_sep' function. */
+#undef HAVE_ARGZ_CREATE_SEP
+
+/* Define to 1 if you have the <argz.h> header file. */
+#undef HAVE_ARGZ_H
+
+/* Define to 1 if you have the `argz_insert' function. */
+#undef HAVE_ARGZ_INSERT
+
+/* Define to 1 if you have the `argz_next' function. */
+#undef HAVE_ARGZ_NEXT
+
+/* Define to 1 if you have the `argz_stringify' function. */
+#undef HAVE_ARGZ_STRINGIFY
+
+/* Define to 1 if you have the `closedir' function. */
+#undef HAVE_CLOSEDIR
+
+/* Define to 1 if you have the declaration of `cygwin_conv_path', and to 0 if
+   you don't. */
+#undef HAVE_DECL_CYGWIN_CONV_PATH
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define if you have the GNU dld library. */
+#undef HAVE_DLD
+
+/* Define to 1 if you have the <dld.h> header file. */
+#undef HAVE_DLD_H
+
+/* Define to 1 if you have the `dlerror' function. */
+#undef HAVE_DLERROR
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <dl.h> header file. */
+#undef HAVE_DL_H
+
+/* Define if you have the _dyld_func_lookup function. */
+#undef HAVE_DYLD
+
+/* Define to 1 if the system has the type `error_t'. */
+#undef HAVE_ERROR_T
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define if you have the libdl library or equivalent. */
+#undef HAVE_LIBDL
+
+/* Define if libdlloader will be built on this platform */
+#undef HAVE_LIBDLLOADER
+
+/* Define to 1 if you have the <mach-o/dyld.h> header file. */
+#undef HAVE_MACH_O_DYLD_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `opendir' function. */
+#undef HAVE_OPENDIR
+
+/* Define if libtool can extract symbol lists from object files. */
+#undef HAVE_PRELOADED_SYMBOLS
+
+/* Define to 1 if you have the `readdir' function. */
+#undef HAVE_READDIR
+
+/* Define if you have the shl_load function. */
+#undef HAVE_SHL_LOAD
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcat' function. */
+#undef HAVE_STRLCAT
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if you have the <sys/dl.h> header file. */
+#undef HAVE_SYS_DL_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* This value is set to 1 to indicate that the system argz facility works */
+#undef HAVE_WORKING_ARGZ
+
+/* Define if the OS needs help to load dependent libraries for dlopen(). */
+#undef LTDL_DLOPEN_DEPLIBS
+
+/* Define to the system default library search path. */
+#undef LT_DLSEARCH_PATH
+
+/* The archive extension */
+#undef LT_LIBEXT
+
+/* The archive prefix */
+#undef LT_LIBPREFIX
+
+/* Define to the extension used for runtime loadable modules, say, ".so". */
+#undef LT_MODULE_EXT
+
+/* Define to the name of the environment variable that determines the run-time
+   module search path. */
+#undef LT_MODULE_PATH_VAR
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
+/* Define to the shared library suffix, say, ".dylib". */
+#undef LT_SHARED_EXT
+
+/* Define if dlsym() requires a leading underscore in symbol names. */
+#undef NEED_USCORE
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
+
+/* Define so that glibc/gnulib argp.h does not typedef error_t. */
+#undef __error_t_defined
+
+/* Define to a type to use for `error_t' if it is not otherwise available. */
+#undef error_t
diff --git a/libltdl/config/compile b/libltdl/config/compile
new file mode 100755
index 0000000..bac481c
--- /dev/null
+++ b/libltdl/config/compile
@@ -0,0 +1,310 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2010-11-15.09; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010 Free Software
+# Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Win32 hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as `compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l*)
+	  lib=${1#-l}
+	  found=no
+	  save_IFS=$IFS
+	  IFS=';'
+	  for dir in $lib_path $LIB
+	  do
+	    IFS=$save_IFS
+	    if $shared && test -f "$dir/$lib.dll.lib"; then
+	      found=yes
+	      set x "$@" "$dir/$lib.dll.lib"
+	      break
+	    fi
+	    if test -f "$dir/$lib.lib"; then
+	      found=yes
+	      set x "$@" "$dir/$lib.lib"
+	      break
+	    fi
+	  done
+	  IFS=$save_IFS
+
+	  test "$found" != yes && set x "$@" "$lib.lib"
+	  shift
+	  ;;
+	-L*)
+	  func_file_conv "${1#-L}"
+	  if test -z "$lib_path"; then
+	    lib_path=$file
+	  else
+	    lib_path="$lib_path;$file"
+	  fi
+	  linker_opts="$linker_opts -LIBPATH:$file"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as `compile cc -o foo foo.c'.
+	# So we strip `-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no `-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # `.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/libltdl/config/config.guess b/libltdl/config/config.guess
new file mode 100755
index 0000000..43f0cdb
--- /dev/null
+++ b/libltdl/config/config.guess
@@ -0,0 +1,1519 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011 Free Software Foundation, Inc.
+
+timestamp='2011-10-01'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner.  Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep -q __ELF__
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+		os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+	exitcode=$?
+	trap '' 0
+	exit $exitcode ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+	echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+	echo i386-pc-auroraux${UNAME_RELEASE}
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+	echo m68k-milan-mint${UNAME_RELEASE}
+	exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+	echo m68k-hades-mint${UNAME_RELEASE}
+	exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+	echo m68k-unknown-mint${UNAME_RELEASE}
+	exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+	# DG/UX returns AViiON for all architectures
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[4567])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+		    case "${sc_cpu_version}" in
+		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      532)                      # CPU_PA_RISC2_0
+			case "${sc_kernel_bits}" in
+			  32) HP_ARCH="hppa2.0n" ;;
+			  64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+			esac ;;
+		    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^		//' << EOF >$dummy.c
+
+		#define _HPUX_SOURCE
+		#include <stdlib.h>
+		#include <unistd.h>
+
+		int main ()
+		{
+		#if defined(_SC_KERNEL_BITS)
+		    long bits = sysconf(_SC_KERNEL_BITS);
+		#endif
+		    long cpu  = sysconf (_SC_CPU_VERSION);
+
+		    switch (cpu)
+			{
+			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+			case CPU_PA_RISC2_0:
+		#if defined(_SC_KERNEL_BITS)
+			    switch (bits)
+				{
+				case 64: puts ("hppa2.0w"); break;
+				case 32: puts ("hppa2.0n"); break;
+				default: puts ("hppa2.0"); break;
+				} break;
+		#else  /* !defined(_SC_KERNEL_BITS) */
+			    puts ("hppa2.0"); break;
+		#endif
+			default: puts ("hppa1.0"); break;
+			}
+		    exit (0);
+		}
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep -q __LP64__
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+	exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+	exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+	exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+	exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    5000:UNIX_System_V:4.*:*)
+	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	UNAME_PROCESSOR=`/usr/bin/uname -p`
+	case ${UNAME_PROCESSOR} in
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:windows32*:*)
+	# uname -m includes "-pc" on this system.
+	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:*)
+	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    authenticamd | genuineintel | EM64T)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    8664:Windows_NT:*)
+	echo x86_64-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+	esac
+	objdump --private-headers /bin/sh | grep -q ld.so.1
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	else
+	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+		| grep -q __ARM_PCS_VFP
+	    then
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	    else
+		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+	    fi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+	echo frv-unknown-linux-gnu
+	exit ;;
+    hexagon:Linux:*:*)
+	echo hexagon-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	LIBC=gnu
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:* | mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef ${UNAME_MACHINE}
+	#undef ${UNAME_MACHINE}el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=${UNAME_MACHINE}el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=${UNAME_MACHINE}
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-gnu
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    tile*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit ;;
+    xtensa*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+	# Unixware is an offshoot of SVR4, but it has its own version
+	# number series starting with 2...
+	# I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+	# Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+	# uname -m prints for DJGPP always 'pc', but it prints nothing about
+	# the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
+	exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+			# says <Richard.M.Bartel@ccMail.Census.GOV>
+	echo i586-unisys-sysv4
+	exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+		echo mips-nec-sysv${UNAME_RELEASE}
+	else
+		echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+	exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    i386)
+		eval $set_cc_for_build
+		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		      grep IS_64BIT_ARCH >/dev/null
+		  then
+		      UNAME_PROCESSOR="x86_64"
+		  fi
+		fi ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NEO-?:NONSTOP_KERNEL:*:*)
+	echo neo-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+	echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+	"4"
+#else
+	""
+#endif
+	); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/libltdl/config/config.sub b/libltdl/config/config.sub
new file mode 100755
index 0000000..5b87368
--- /dev/null
+++ b/libltdl/config/config.sub
@@ -0,0 +1,1767 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+#   2011 Free Software Foundation, Inc.
+
+timestamp='2011-10-08'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray | -microblaze)
+		os=
+		basic_machine=$1
+		;;
+	-bluegene*)
+		os=-cnk
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+	-chorusrdb)
+		os=-chorusrdb
+		basic_machine=$1
+		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+        | be32 | be64 \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| epiphany \
+	| fido | fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| hexagon \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| le32 | le64 \
+	| lm32 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep | metag \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64octeon | mips64octeonel \
+	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| moxie \
+	| mt \
+	| msp430 \
+	| nds32 | nds32le | nds32be \
+	| nios | nios2 \
+	| ns16k | ns32k \
+	| open8 \
+	| or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pyramid \
+	| rx \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu \
+	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+	| ubicom32 \
+	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| we32k \
+	| x86 | xc16x | xstormy16 | xtensa \
+	| z8k | z80)
+		basic_machine=$basic_machine-unknown
+		;;
+	c54x)
+		basic_machine=tic54x-unknown
+		;;
+	c55x)
+		basic_machine=tic55x-unknown
+		;;
+	c6x)
+		basic_machine=tic6x-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	strongarm | thumb | xscale)
+		basic_machine=arm-unknown
+		;;
+
+	xscaleeb)
+		basic_machine=armeb-unknown
+		;;
+
+	xscaleel)
+		basic_machine=armel-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| be32-* | be64-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| hexagon-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| le32-* | le64-* \
+	| lm32-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64octeon-* | mips64octeonel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nds32-* | nds32le-* | nds32be-* \
+	| nios-* | nios2-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| open8-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pyramid-* \
+	| romp-* | rs6000-* | rx-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| tahoe-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tile*-* \
+	| tron-* \
+	| ubicom32-* \
+	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+	| vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-* | z80-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	bluegene*)
+		basic_machine=powerpc-ibm
+		os=-cnk
+		;;
+	c54x-*)
+		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c55x-*)
+		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c6x-*)
+		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16 | cr16-*)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	microblaze)
+		basic_machine=microblaze-xilinx
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	nacl)
+		basic_machine=le32-unknown
+		os=-nacl
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	neo-tandem)
+		basic_machine=neo-tandem
+		;;
+	nse-tandem)
+		basic_machine=nse-tandem
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc | ppcbe)	basic_machine=powerpc-unknown
+		;;
+	ppc-* | ppcbe-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	strongarm-* | thumb-*)
+		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tile*)
+		basic_machine=$basic_machine-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	xscale-* | xscalee[bl]-*)
+		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+	# First match some system type aliases
+	# that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-auroraux)
+		os=-auroraux
+		;;
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+	      | -sym* | -kopensolaris* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* | -aros* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-android* \
+	      | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+	-os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+	-tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-dicos*)
+		os=-dicos
+		;;
+	-nacl*)
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	score-*)
+		os=-elf
+		;;
+	spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+	c4x-* | tic4x-*)
+		os=-coff
+		;;
+	tic54x-*)
+		os=-coff
+		;;
+	tic55x-*)
+		os=-coff
+		;;
+	tic6x-*)
+		os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-cnk*|-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/libltdl/config/depcomp b/libltdl/config/depcomp
new file mode 100755
index 0000000..df8eea7
--- /dev/null
+++ b/libltdl/config/depcomp
@@ -0,0 +1,630 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> "$depfile"
+    echo >> "$depfile"
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/libltdl/config/edit-readme-alpha b/libltdl/config/edit-readme-alpha
new file mode 100755
index 0000000..ee6ca6b
--- /dev/null
+++ b/libltdl/config/edit-readme-alpha
@@ -0,0 +1,94 @@
+#! /bin/sh
+
+#   edit-readme-alpha - edit README file for alpha releases
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2010
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# We used to maintain separate (but extremely similiar!) README and
+# README.alpha files, and had `make dist' include the right one in a
+# distribution based on the contests of `$(VERSION)'.
+#
+# Now, we have `make dist' call this script to tweak the first paragraph
+# of README in situ, to be more suitable for an alpha quality release.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" |sed 's|^.*/||'`
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    echo "$progname: $*" >&2
+    exit $EXIT_FAILURE
+}
+
+
+for file in "$@"; do
+  # Assume that read-only README indicates that we are running inside
+  # the latter part of a `make distcheck'.
+  test -w $file || {
+    echo "$progname: not editing non-writeable \`$file' (distcheck?)" >&2
+    continue
+  }
+
+  # Make sure the paragraph we are matching has not been edited since
+  # this script was written.
+  matched=`sed -n -e '/^This is GNU Libtool,/,/^interface\.$/p' $file \
+           |wc -l |sed 's|^ *||'`
+
+  # Unless, of course, it was edited by this script already.
+  test 3 = "$matched" \
+      || matched=`sed -n -e '/^This is an alpha testing release/,/behind a consistent, portable interface\.$/p' $file \
+                  |wc -l |sed 's|^ *||'`
+
+  test 3 = "$matched" \
+      || func_fatal_error "$file format has changed, please fix \`$0'"
+
+  # Don't leave file droppings.
+  trap 'x=$?; rm $file.T; exit $x' 1 2 13 15
+
+  # Edit the first paragraph to be suitable for an alpha release.
+  sed -e '/^This is GNU Libtool,/,/^interface.$/c\
+This is an alpha testing release of GNU Libtool, a generic library\
+support script.  Libtool hides the complexity of using shared libraries\
+behind a consistent, portable interface.' $file > $file.T
+
+  # Diagnose redirection failure.
+  test -f $file.T || func_fatal_error "Unable to write $file.T"
+
+  # Overwrite the original file with our edited version.
+  mv $file.T $file || func_fatal_error "Unable to edit $file"
+done
+
+exit $EXIT_SUCCESS
diff --git a/libltdl/config/general.m4sh b/libltdl/config/general.m4sh
new file mode 100644
index 0000000..40d5413
--- /dev/null
+++ b/libltdl/config/general.m4sh
@@ -0,0 +1,623 @@
+m4_divert_push([KILL])					-*- Autoconf -*-
+# general.m4sh -- general shell script boiler plate
+#
+#   Copyright (C) 2004, 2005, 2007, 2008, 2010 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+m4_define([M4SH_VERBATIM], [$1])
+
+m4_ifndef([M4SH_IN_HEADER],
+[m4_define([M4SH_IN_HEADER],
+[m4_divert_text([HEADER-COPYRIGHT], [$1])])])
+
+m4_divert_pop([KILL])M4SH_IN_HEADER([dnl
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+])
+
+M4SH_VERBATIM([[
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${EGREP="@EGREP@"}
+: ${FGREP="@FGREP@"}
+: ${GREP="@GREP@"}
+: ${LN_S="@LN_S@"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="@SED@"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\@<:@\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*@:>@*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "$1" | $SED \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\@<:@\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*@:>@*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
+]])
diff --git a/libltdl/config/getopt.m4sh b/libltdl/config/getopt.m4sh
new file mode 100644
index 0000000..e9363bc
--- /dev/null
+++ b/libltdl/config/getopt.m4sh
@@ -0,0 +1,648 @@
+m4_include([general.m4sh])m4_divert_push([KILL])	-*- Autoconf -*-
+# getopt.m4sh -- getopt helper functions
+#
+#    Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+#    Foundation, Inc.
+#    Written by Gary V. Vaughan, 2004
+#
+#    This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that contains
+# a configuration script generated by Autoconf, you may include this
+# file under the same distribution terms that you use for the rest
+# of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# This file provides the M4SH_GETOPTS option processing compiler, and
+# all necessary support at the m4 and shell-script levels.
+#
+# An m4sh script can include this file, and an M4SH_GETOPTS invocation
+# that expands to a shell script option processing loop with similar
+# abilites to a C program the uses getopt_long() to process it's command
+# line options - although, unlike the C API, M4SH_GETOPTS also supplies
+# the loop to step through and process the options.
+#
+# See the comment above M4SH_GETOPTS, below, for details.
+
+
+# All internal macros begin with `m4go_'.
+m4_pattern_forbid([^_?m4go_])
+
+
+## --------------------------- ##
+## 1. Backwards compatibility. ##
+## --------------------------- ##
+
+# We prefer m4sugar.m4 from Autoconf-2.64, but have fallbacks in this
+# section that work back as far as Autoconf-2.62.  This file is used
+# at bootstrap time to generate the shell processing loop for ltmain.sh
+# and libtoolize.in, so it's okay for the requirement to be tighter
+# than the configure time Autoconf prerequisite version.
+m4_version_prereq([2.62])
+
+# m4_chomp(STRING)
+# ----------------
+# m4_chomp was not introduced until Autoconf-2.64.  Currently we
+# only use it indirectly via m4go_expand, below.  This implementation
+# is taken from Autoconf-2.65.
+m4_ifndef([m4_chomp],
+[m4_define([m4_chomp],
+[m4_format([[%.*s]], m4_index(m4_translit([[$1]], [
+/.], [/  ])[./.], [/.]), [$1])])])
+
+# m4go_expand(ARG)
+# ----------------
+# M4SH_GETOPTS wants to pass unbalanced parentheses to m4_expand to
+# build the branches of a shell `case' statement.  That is only
+# supported by the implementation of m4_expand in Autoconf-2.64 and
+# newer.  Since we want to be compatible back to at least
+# Autoconf-2.62, reimplement our own 2.64 based m4_expand in the
+# m4go_ namespace so that we can be compatible with Autoconf versions
+# supporting either semantic.
+m4_define([m4go_expand],
+[m4_chomp(_$0([$1
+]))])
+
+m4_define([_m4go_expand], [$0_([$1], [(], -=<{($1)}>=-, [}>=-])])
+
+m4_define([_m4go_ignore])
+
+m4_define([_m4go_expand_],
+[m4_if([$4], [}>=-],
+       [m4_changequote([-=<{$2], [)}>=-])$3m4_changequote([, ])],
+       [$0([$1], [($2], -=<{($2$1)}>=-, [}>=-])_m4go_ignore$2])])
+
+
+## --------------------------------- ##
+## 2. Low level string manipulation. ##
+## --------------------------------- ##
+
+# m4go_slice(STRING, BEGIN, END)
+# ------------------------------
+# Just like m4_substr(), except that both the BEGIN and END of the
+# substring are given as offsets from the beginning of STRING, as
+# returned by m4_index().
+m4_define([m4go_slice],
+[m4_substr([$1], [$2], m4_eval([$3-$2]))])
+
+# m4go_trimn(STRING)
+# -------------------
+# Trim all leading and trailing newlines from STRING.
+#
+# Inspite of careful quoting, this macro is NOT robust to active
+# symbols:
+#        | m4_define(active, ACTV)
+#        | m4go_trimn([[
+#        |    start active finish
+#        | ]])
+#       => start ACTV fini
+# The interaction between index counting and macro expansion also
+# results in overtrimming in this example by 2 characters (the
+# difference between the lengths of `active' and `ACTV'). Translation
+# into French is just a coincidence.
+#
+# The implementation is surprisingly finicky: We use m4go_slice() to
+# extract the middle section of the string, while using m4_bregexp() to
+# return offset counts for the first and last non-newlines in STRING.
+# But there are a number of corner cases:
+#  1. Double quoted STRING works, (i.e m4go_trimn([[\nthe string\n]]. We
+#     achieve that by transliterating quote characters as well as
+#     newlines to the same character before counting off the offsets.
+#  2. This needs a slightly different transliteration for each
+#     m4_bregexp() invocation, because we need to maintain balanced
+#     quotes in the argument and we don't want to swallow leading ']' or
+#     trailing '[' characters.  So, we turn the quote we don't want to
+#     strip into a harmless ' '.
+#  3. Because we're now effectively stripping the quotation with the
+#     m4_translit() calls, embedded commas can fool m4_bregexp() into
+#     thinking there are more arguments than we intended, so we turn
+#     them into spaces too.
+#  4. Unbalanced parentheses would also confuse m4_bregexp(), so we also
+#     turn them into spaces.  The upshot of that if STRING contains a
+#     macro invocation with arguments, it will be expanded in the result
+#     as if no arguments had been passed.
+#  5. Comments are not ignored after stripping quote marks, so we have
+#     to turn them off for the duration.
+#  6. Finally, we need to requote the result to account for the quotes
+#     we probably stripped.  m4_quote() doesn't handle commas well, so
+#     we use m4go_expand() to requote without losing whitespace after
+#     any embedded commas.
+m4_define([m4go_trimn],
+[m4_changecom()m4go_expand([m4go_slice([$1], m4_bregexp(m4_translit([$1],[
+[/,()]], [//     ]), [[^/]]), m4_bregexp(m4_translit([$1], [
+[/,()]], [/     /]), [/*$]))])[]m4_changecom([#])])
+
+# m4go_untab(STRING)
+# ------------------
+# Trim leading TABs from each line of STRING.
+m4_define([m4go_untab],
+[m4_bpatsubst([$1], [^[	]*], [])])
+
+# m4go_unindent(STRING)
+# ---------------------
+# Completely unindent STRING: Remove the leading TABs from each line of
+# STRING; trim leading newlines and trailing whitespace from STRING as
+# a whole.
+m4_define([m4go_unindent],
+[m4_ifval([$1], [m4go_untab([m4go_trimn([$1])])])])
+
+
+## ------------------------------ ##
+## 3. Option processing compiler. ##
+## ------------------------------ ##
+
+# Shell fragments are piecemeal added to these macros for each
+# invocation of m4go_option; eventually to be expanded into the compiled
+# option parsing shell script by M4SH_GETOPTS:
+
+m4_define([m4go_defaults], [])	# initial shell option variable setings
+m4_define([m4go_branches], [])	# case branches to process options
+
+# The initial entries in m4go_shortnoargs represent the (non-argument)
+# options that are always accepted by the expanded processing loop. We
+# also keep a list of short options that accept an option argument in
+# the macro `m4go_shortargs', but we use `m4_append([m4go_shortargs],
+# OPTION, [|])' to insert the separator pipe symbols - which requires
+# that `m4go_shortargs' be undefined if the first option appended is not
+# prefixed by a leading `|'.
+m4_define([m4go_shortnoargs], [-\?*|-h*])
+
+
+# M4SH_GETOPTS(SHORT-SPEC1, LONG-MATCH1, DEF1, INIT1,
+#              SHORT-SPEC2, LONG-MATCH2, DEF2, INIT2, ... [VALIDATION])
+# ---------------------------------------------------------------------
+# Declare a series of command line options with one letter (`-m') or
+# long form `--message' formats, along with optional default values
+# incase a given option is not provided by the user when the script is
+# invoked, and validation code, for example to prevent specifying
+# mutually exclusive options or omitting required options.
+#
+# After this macro has been called, the value of each option is
+# available in a shell variable named `opt_' followed by the first part
+# (i.e. up to the first '|' symbol) of the LONG-MATCHn argument with the
+# leading `--` removed, and any further `-' converted to `_', or else if
+# no long form option was provided, simple `opt_' followed by the short
+# option letter. For example, the value supplied by the user as an
+# argument to an option `--gpg-key-id' will be available in the shell
+# variable $opt_gpg_key_id, `-c' with no long form option will be
+# available as $opt_c and so on. Where an option doesn't take an
+# argument, then the shell variable will be set to either `:' or `false'
+# depending on whether the user set that option on the script command
+# line - with one important exception: If the long form option name
+# begins with `--no-', and does not require an option argument, then the
+# variable name will be `opt_' followed by the rest of the option name
+# with the leading `no_' removed; and it's value will be `false' if
+# `--no-foo' was given on the command line, and `:' otherwise.
+#
+# Each option is declared by a set of 4 arguments as follows:
+#
+# SHORT-SPECn
+#	The short option letter, if any, for the nth option followed by
+#	any flags to denote special processing for this option. For
+#	example, `f?@'. See below for a list of the supported flags and
+#	their meaning. If you specify `h', `v' or `x', then the
+#	automatic processing of those short options for `--help',
+#	`--version' and `--debug' (resp.) will be overridden.
+# LONG-MATCHn
+#	The long option list, including leading dashes for the nth
+#	option. The value for this option is used directly as a shell
+#	`case' branch to match the option, so you can specify multiple
+#	matches. For example, `--message|--mes*|--msg'.  If you specify
+#	neither this argument nor a short option letter with
+#	SHORT-SPECn, then invalid shell code will be generated.
+# DEFn	If there is a default value for the nth option to take when it
+#	is not given on the command line when the script is executed,
+#	specify it here. Double quotes are added in the expanded shell
+#	script, so it is safe to use shell variables. For example,
+#	`$HOME/.foorc'.
+# INITn	Any option specific initialisation for the nth option should be
+#	specified in this argument. The shell code it contains is added
+#	directly to the case branch that matches the nth option, after
+#	the `opt_NAME' variable has been set, with the option argument
+#	(if any) still left in `$1'.  This allows neat tricks such as
+#	injecting new arguments into the command line before the
+#	processing loop terminates.  For example:
+#
+#		`eval set -- `cat $rcfile` ${1+"$@"}'
+#
+#	Note that, because we look inside the content of INITn to
+#	determine whether there are newlines to be stripped, double
+#	quoting the whele thing doesn't work.  Instead, you'll need to
+#	quote active symbols yourself.  Generally, you'll only need to
+#	worry about $n and $@, although if you use symbols that can be
+#	expanded by m4 you'll need to quote those too.
+# VALIDATION
+#	The final argument, if any, should contain shell code to
+#	validate correctness of the processed options.  This code is
+#	expanded after the option processing loop has exited, and before
+#	the conditional script exit if errors have been found.  Try to
+#	show as many errors as possible before exiting the shell rather
+#	than bailing out on the first error discovered so that the user
+#	can correct all of them at once rather than just one between
+#	each reinvocation of the script.
+#
+# In addition to an option short form letter (e.g. `m'), each
+# SHORT-SPECn argument can also list one or more of the following flags
+# to place additional constraints on that option (only one of `?', `+'
+# and `@' can be given in any SHORT-SPECn):
+#
+# =STRING
+#	The option does not take an argument, but when specified on the
+#	command line the `opt_' variable is set to STRING.
+# ?	The option takes an optional argument. Unless the next command
+#	line argument begins with a `-' it will be the value stored in
+#	this option's `opt_' shell variable. Otherwise the `opt_'
+#	variable will contain the INITn value.
+# !	The option requires an argument. The next command line argument
+#	will be stored in this option's `opt_' shell variable, or else
+#	the INITn value, if any, will be stored if this option is not
+#	given on the command line.
+# ;	The same as `!', except that when the argument is given multiple
+#	times on the command line, each argument is appended to the
+#	`opt_' shell variable, along with a new-line to separate it from
+#	the previous argument.
+# +	The same as `!', except that each time the argument is supplied
+#	on the command line, it's value is stored in an `opt_' variable
+#	with `_n' appended to the variable name - where `n' is `1' for
+#	the first argument, `2, for the second and so on.
+# @	The option argument must point to an existing file. The
+#	processing loop will automatically contain an additional check
+#	to ensure that the named file exists. `@' can be added to a
+#	SHORT-SPECn argument in addition to any other flags.
+# ^	The value stored in the `opt_' variable is quoted by passing it
+#	through the shell function `func_quote_for_eval'.
+#
+# The M4SH_GETOPTS macro is implemented by first delegating to
+# `_M4SH_GETOPTS', a shift4-loop that repeatedly calls `m4go_options',
+# shifts away the 4 processed arguments, checks the number of remaining
+# args and loops again until only 1 argument (VALIDATION) or 0 arguments
+# (no VALIDATION code) remain. When all the processing is complete, we
+# expand 'm4go_printopts' to write out the complete command line
+# processing shell loop.
+#
+# Generally, you can combine the SHORT-SPECn flags in sensible ways,
+# but no error checking is done. If you choose a combination that makes
+# no sense, you'll probably end up with broken shell code.
+m4_define([M4SH_GETOPTS],
+[_$0($@)[]m4go_printopts])
+m4_define([_M4SH_GETOPTS],
+[m4_if([$#], 0, [],
+       [$#], 1, [m4_define([m4go_validation],[$1])],
+       [$#], 2, [m4_fatal([$0: too few arguments: $#: $2])],
+       [$#], 3, [m4_fatal([$0: too few arguments: $#: $3])],
+       [m4go_option($@)[]$0(m4_shiftn(4, $@))])])
+
+
+# m4go_option(SHORT-SPEC, LONG-MATCH, DEFAULT, INIT)
+# --------------------------------------------------
+# This macro is a wrapper for `_m4go_option', which first extracts the
+# short option letter (if any) from SHORT-SPEC, and then calculates the
+# full `opt_' shell variable name for this option before delegating
+# those results along with all of its own arguments to `_m4go_option'.
+#
+# Note that when the LONG-MATCH begins with `--no-', we add `~' to the
+# list of SHORT-SPEC flags before calling `_m4go_option' to denote that
+# the name of the `opt_' variable is reversed in the sense of the option
+# name itself.That is, we want to start with the option being true, and
+# set it to false if `--no-foo' is given on the command line.
+#
+# `m4_do' is used here to separate out the pushdef and popdef of the
+# temporary `_short' macro used to held the extracted short option
+# letter, if any.
+m4_define([m4go_option],
+[m4_do(
+    [m4_pushdef([_short],
+        m4_bmatch([$1],
+            [[?!;+@^]], m4_bpatsubst([$1], [[?!;+@^]*], []),
+            [^=],       [],
+            [.],        [[$1]],
+                        []))],
+    [_$0(opt_[]m4_ifval([$2],
+            m4_translit(m4_bpatsubst([$2], [^--\(no-\)?\([^|]+\).*$],
+                                     [\2]), -, _),
+                _short),
+         _short,
+         [$1]m4_bmatch([$2], [^--no-], [~]),
+         [$2],
+         [$3],
+         [$4])],
+    [m4_popdef([_short])])])
+
+
+# _m4go_option(OPTION-NAME, SHORT-OPTION, SHORT-SPEC, LONG-MATCH,
+#                  DEFAULT, INIT)
+#----------------------------------------------------------------
+# For this option, append the appropriate shell code fragments to:
+# `m4go_defaults'
+#	A shell script fragment containing `opt_' variable
+#	initialisation according to DEFAULT, if necessary;
+# `m4go_branches'
+#	The case branch to match any SHORT-OPTION or LONG-MATCH command
+#	line option, along with any automatic processing implied by
+#	SHORT-SPEC flags, and additional code from INIT;
+# `m4go_shortargs'
+#	This match string accumulates all of the short options that
+#	accept option arguments, so that we can generate some additional
+#	code to split apart compacted option strings (`-xfoo' will be
+#	treated as if `-x foo' had been passed) in `m4go_printopts'.
+# `m4go_shortnoargs'
+#	Similarly, accumulate short options that do not take option
+#	arguments, so that we can generate the code to split apart
+#	compacted options strings in `m4go_printopts' (`-xfoo' will be
+#	treated as if `-x -f -o -o' had been passed).
+#
+# The core of this macro switches the `m4go_branches' processing to an
+# appropriate macro depending on what flags are present in SHORT-SPEC.
+
+m4_define([_m4go_option],
+[m4_do(
+    [m4_append([m4go_defaults],
+        m4_bmatch([$3],
+            [[?!;+@^]], [m4_ifval([$5], [m4_n([$1="$5"])])],
+            [~],        [m4_n([$1=:])],
+                        [m4_n([$1=false])]))],
+    [m4_append([m4go_branches], [[]dnl (
+      m4_join([|], [$4], m4_ifval([$2], [-$2])))
+])],
+    [m4_append([m4go_branches],
+        [m4_bmatch([$3], [[!+@]],
+[			test [$]# = 0 && func_missing_arg $opt && break
+])m4_n(m4_bmatch([$3],
+    [\^],      [			func_quote_for_eval "[$]1"
+			optarg="$func_quote_for_eval_result"],
+    [[?!;+@]], [			optarg="[$]1"]))[]dnl
+m4_n(m4_bmatch([$3],
+    [+],       [			$1_num=`expr 1 + ${$1_num-0}`
+			eval $1_${$1_num}=\"$optarg\"],
+    [?],       [m4_bmatch([$3],
+                    [@], [m4go_expand([m4go_optional_file_arg([$1])])],
+                         [m4go_expand([m4go_optional_arg([$1])])])],
+    [[!@]],    [			$1="$optarg"],
+    [;],       [			$1="${$1+[$]$1
+}$optarg"],
+    [~],       [			$1=false],
+    [=.],      [			$1="m4_bpatsubst([$3], [^.*=], [])"],
+               [			$1=:]))[]dnl
+dnl only write the file_arg fragment when we didn't already write opt_file_arg:
+m4_bmatch([$3], [@], [m4_bmatch([$3], [?], [],
+                   [m4go_expand([m4go_file_arg([$1])])
+])])m4_n(m4go_unindent([$6]))[]dnl
+m4_bmatch([$3], [[!+;]], [			shift
+])			;;
+])],
+    [m4_ifval([$2],
+        [m4_bmatch([$3],
+            [[?!;+@^~]], [m4_append([m4go_shortargs],   [-$2*], [|])],
+                       [m4_append([m4go_shortnoargs], [-$2*],
+                                  [|])])])])])
+
+
+# m4go_optional_arg(OPTION-NAME)
+# ------------------------------
+# Expand to the case branch core code for processing a flag that takes
+# an optional argument, and sets the `opt_' variable named by
+# OPTION-NAME appropriately.
+m4_define([m4go_optional_arg],
+[			if test [$]# -gt 0; then
+			    case $optarg in # ((
+			        -*) ;;
+			        *) $1="$optarg"; shift ;;
+			    esac
+			fi])
+
+# m4go_file_arg(OPTION-NAME)
+# --------------------------
+# As above, but for flags that require the name of an existing file as
+# an argument.
+m4_define([m4go_file_arg],
+[			test -r "$optarg" || {
+			    func_error "$opt: cannot read file \`$optarg'."
+			    exit_cmd=exit
+			}])
+
+# m4go_optional_file_arg(OPTION-NAME)
+# -----------------------------------
+# As above, but for options that optionally takes the name of an
+# existing file as its argument.
+m4_define([m4go_optional_file_arg],
+[			if test [$]# -gt 0; then
+			    case $optarg in # ((
+			        -*) ;;
+			        *)  $1="$optarg"
+			            test -r "$optarg" || {
+			                func_error "$opt: cannot read file \`$optarg'."
+			                exit_cmd=exit
+			            }
+			            shift ;;
+			    esac
+			fi])
+
+
+# m4go_printopts
+# --------------
+# This macro expands to the complete command line option processing
+# loop, providing for user declared options from `M4SH_GETOPTS' as well
+# as support for `-x|--debug', `-\?|-h|--help' and `--version'.  The
+# latter two extract their output from a stylized comment at the start
+# of the script, and will not work correctly if the format is not
+# followed precisely.
+m4_define([m4go_printopts],
+[
+# Option defaults:
+opt_debug=:
+m4go_defaults
+
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+  # this just eases exit handling
+  while test [$]# -gt 0; do
+    opt="[$]1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+m4go_branches
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"[$]@"}
+			shift
+			;;
+
+m4_ifset([m4go_shortargs], dnl (
+[      # Separate optargs to short options:
+      ]m4go_shortargs[)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "$func_split_short_opt_arg" ${1+"[$]@"}
+			shift
+			;;
+
+])m4_ifset([m4go_shortnoargs], dnl (
+[      # Separate non-argument short options:
+      ]m4go_shortnoargs[)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"[$]@"}
+			shift
+			;;
+
+])      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"[$]@"};	shift; break  ;;
+    esac
+  done
+m4_ifset([m4go_validation],
+[
+  # Validate options:
+m4go_validation
+])
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
+}
+])
+
+
+## ------------------------- ##
+## 4. Supporting Shell Code. ##
+## ------------------------- ##
+
+# The shell functions below are expanded verbatim into the shell script
+# at `m4_include([getopt.m4sh]', which are necessary for the correct
+# operation of the automatic `--version' and `--help' options, among
+# others.
+
+m4_divert_pop([KILL])M4SH_VERBATIM([[
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $opt_debug
+
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    echo
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+	p
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $opt_debug
+
+    func_error "missing argument for $1."
+    exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
+
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+]])
+
diff --git a/libltdl/config/install-sh b/libltdl/config/install-sh
new file mode 100755
index 0000000..a9244eb
--- /dev/null
+++ b/libltdl/config/install-sh
@@ -0,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-01-19.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	# Protect names problematic for `test' and other utilities.
+	case $dst_arg in
+	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+	esac
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for `test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for `test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	[-=\(\)!]*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test X"$d" = X && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/libltdl/config/ltmain.m4sh b/libltdl/config/ltmain.m4sh
new file mode 100644
index 0000000..2641327
--- /dev/null
+++ b/libltdl/config/ltmain.m4sh
@@ -0,0 +1,8868 @@
+m4_define([_m4_divert(SCRIPT)], 100)
+m4_divert_push([SCRIPT])
+# libtool (GNU @PACKAGE@@TIMESTAMP@) @VERSION@
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --no-warn            don't display warning messages
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU @PACKAGE@@TIMESTAMP@) @VERSION@
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
+#
+# Report bugs to <@PACKAGE_BUGREPORT@>.
+# GNU @PACKAGE@ home page: <@PACKAGE_URL@>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=@PACKAGE@
+VERSION=@VERSION@
+TIMESTAMP="@TIMESTAMP@"
+package_revision=@package_revision@
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+          save_$lt_var=\$$lt_var
+          $lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+dnl This script is generated by config.status, so we cannot put things
+dnl in the header.
+m4_define([M4SH_IN_HEADER], [$1])dnl
+
+m4_include([getopt.m4sh])
+
+M4SH_VERBATIM([[
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+    eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+    func_quote_for_eval "${2}"
+    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+    func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
+
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
+
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+  shift; set dummy --mode clean ${1+"$@"}; shift
+  ;;
+compile|compil|compi|comp|com|co|c)
+  shift; set dummy --mode compile ${1+"$@"}; shift
+  ;;
+execute|execut|execu|exec|exe|ex|e)
+  shift; set dummy --mode execute ${1+"$@"}; shift
+  ;;
+finish|finis|fini|fin|fi|f)
+  shift; set dummy --mode finish ${1+"$@"}; shift
+  ;;
+install|instal|insta|inst|ins|in|i)
+  shift; set dummy --mode install ${1+"$@"}; shift
+  ;;
+link|lin|li|l)
+  shift; set dummy --mode link ${1+"$@"}; shift
+  ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+  shift; set dummy --mode uninstall ${1+"$@"}; shift
+  ;;
+esac
+]])
+
+dnl SHORT	LONG			       DEFAULT		      INIT
+dnl ----------------------------------------------------------------------
+M4SH_GETOPTS(
+  [n],		[--dry-run|--dryrun],		[],			[],
+  [],		[--config],			[], 			[
+	func_config],
+  [;],		[--dlopen|-dlopen],		[],			[],
+  [],		[--preserve-dup-deps],		[],			[],
+  [],		[--features],			[],			[
+	func_features],
+  [],		[--finish],			[],			[
+	set dummy --mode finish ${1+"[$]@"}; shift],
+  [],		[--help],			[],			[],
+  [],		[--help-all],			[],			[
+	opt_help=': help-all'],
+  [!],		[--mode],			[],			[
+	case $optarg in
+	  # Valid mode arguments:
+	  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+	  # Catch anything else as an error
+	  *) func_error "invalid argument for $opt"
+	     exit_cmd=exit
+	     break
+	     ;;
+	esac],
+  [],		[--no-silent|--no-quiet],	[false],		[
+	func_append preserve_args " $opt"],
+  [],		[--no-warning|--no-warn],	[false],		[
+	func_append preserve_args " $opt"],
+  [],		[--no-verbose],			[false],		[
+	func_append preserve_args " $opt"],
+  [],		[--silent|--quiet],		[],			[
+	func_append preserve_args " $opt"
+        opt_verbose=false],
+  [v],		[--verbose],			[],			[
+	func_append preserve_args " $opt"
+	opt_silent=false],
+  [!],		[--tag],			[],			[
+	func_append preserve_args " $opt $optarg"
+	func_enable_tag "$optarg"],
+[
+  # save first non-option argument
+  if test "$[]#" -gt 0; then
+    nonopt="$opt"
+    shift
+  fi
+
+  # preserve --debug
+  test "$opt_debug" = : || func_append preserve_args " --debug"
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      ;;
+  esac
+
+  $opt_help || {
+    # Sanity checks first:
+    func_check_version_match
+
+    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+      func_fatal_configuration "not configured to build any kind of library"
+    fi
+
+    # Darwin sucks
+    eval std_shrext=\"$shrext_cmds\"
+
+    # Only execute mode is allowed to have -dlopen flags.
+    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+      func_error "unrecognized option \`-dlopen'"
+      $ECHO "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Change the help message to a mode-specific one.
+    generic_help="$help"
+    help="Try \`$progname --help --mode=$opt_mode' for more information."
+  }
+])
+
+
+M4SH_VERBATIM([[
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case "$lt_sysroot:$1" in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result="=$func_stripname_result"
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $opt_debug
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
+    else
+      write_lobj=none
+    fi
+
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $opt_debug
+  func_convert_core_file_wine_to_w32_result="$1"
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$lt_sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $opt_debug
+  # unfortunately, winepath doesn't convert paths, only file names 
+  func_convert_core_path_wine_to_w32_result=""
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $opt_debug
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $opt_debug
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $opt_debug
+  if test -z "$2" && test -n "$1" ; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  \`$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result="$1"
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $opt_debug
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  \`$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result="$3"
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $opt_debug
+  case $4 in
+  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $opt_debug
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $opt_debug
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $opt_debug
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $opt_debug
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+	  for arg in $args; do
+	    IFS="$save_ifs"
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS="$save_ifs"
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with \`-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[@:>@~#^*{};<>?"'"'"'	 &()|`$@<:@]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
+    lobj=${xdir}$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test "$opt_help" = :; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    sed '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "\`$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument \`$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the \`$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=""
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname" ; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename="$func_basename_result"
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename" ; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      func_to_tool_file "$1" func_convert_file_msys_to_w32
+      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $opt_debug
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $opt_debug
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive which possess that section. Heuristic: eliminate
+    # all those which have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $opt_debug
+  if func_cygming_gnu_implib_p "$1" ; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1" ; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=""
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    if test "$lock_old_archive_extraction" = yes; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test "$lock_old_archive_extraction" = yes; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (strcmp (argv[i], debug_opt) == 0)
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $opt_debug
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module="${wl}-single_module"
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir="$arg"
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none &&
+		   test "$non_pic_object" = none; then
+		  func_fatal_error "cannot find name of object for \`$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file \`$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none &&
+	     test "$non_pic_object" = none; then
+	    func_fatal_error "cannot find name of object for \`$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname="$func_basename_result"
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps ; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    func_warning "\`-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "\`-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=yes
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=yes
+		;;
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      else
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+	fi
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for \`$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    func_fatal_error "\`$lib' is not a convenience library"
+	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test "$prefer_static_libs" = yes ||
+	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib="$l"
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for \`$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname="$func_basename_result"
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library \`$lib' was moved."
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$lt_sysroot$libdir"
+	    absdir="$lt_sysroot$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	  fi
+	  case "$host" in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    echo
+	    if test "$linkmode" = prog; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$absdir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+		add="$inst_prefix_dir$libdir/$linklib"
+	      else
+		add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of \`$dir'"
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path="-L$absdir/$objdir"
+		  ;;
+		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	shift
+	IFS="$save_ifs"
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|qnx|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_minor"
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$1"
+	  revision="$2"
+	  age="$3"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	irix | nonstopux)
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":${current}.0"
+	  ;;
+
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    func_warning "undefined symbols not allowed in $host shared libraries"
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      func_append libobjs " $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
+      if test "$opt_mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=""
+		    ;;
+		  esac
+		fi
+		if test -n "$i" ; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test "$want_nocaseglob" = yes; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname="$1"
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS="$save_ifs"
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test "$try_normal_branch" = yes \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=${output_objdir}/${output_la}.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs="$tmp_deplibs"
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    fi
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$opt_mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS="$save_ifs"
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$opt_mode" = relink; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	else
+	  gentop="$output_objdir/${obj}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
+
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " ${wl}-bind_at_load"
+	      func_append finalize_command " ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=yes
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+	fi
+
+	exit $exit_status
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save $symfileobj"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    func_append oldobjs " $symfileobj"
+	  fi
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name="$func_basename_result"
+		func_resolve_sysroot "$deplib"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test "x$bindir" != x ;
+	      then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+    func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=yes ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
+	odir="$objdir"
+      else
+	odir="$dir/$objdir"
+      fi
+      func_basename "$file"
+      name="$func_basename_result"
+      test "$opt_mode" = uninstall && odir="$dir"
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test "$opt_mode" = clean; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case "$opt_mode" in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test "$opt_mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      func_append rmfiles " $odir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+]])
diff --git a/libltdl/config/ltmain.sh b/libltdl/config/ltmain.sh
new file mode 100644
index 0000000..63ae69d
--- /dev/null
+++ b/libltdl/config/ltmain.sh
@@ -0,0 +1,9655 @@
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --no-warn            don't display warning messages
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU libtool) 2.4.2
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+          save_$lt_var=\$$lt_var
+          $lt_var=C
+	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+	fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "$1" | $SED \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $opt_debug
+
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    echo
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+	p
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $opt_debug
+
+    func_error "missing argument for $1."
+    exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
+
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+nonopt=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+    eval "${1}=\$${1}\${2}"
+} # func_append may be replaced by extended shell implementation
+
+# func_append_quoted var value
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+func_append_quoted ()
+{
+    func_quote_for_eval "${2}"
+    eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
+} # func_append_quoted may be replaced by extended shell implementation
+
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+    func_arith_result=`expr "${@}"`
+} # func_arith may be replaced by extended shell implementation
+
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+    func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
+} # func_len may be replaced by extended shell implementation
+
+
+# func_lo2o object
+func_lo2o ()
+{
+    func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
+} # func_lo2o may be replaced by extended shell implementation
+
+
+# func_xform libobj-or-source
+func_xform ()
+{
+    func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
+} # func_xform may be replaced by extended shell implementation
+
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+    done
+
+    exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      echo "enable shared libraries"
+    else
+      echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      echo "enable static libraries"
+    else
+      echo "disable static libraries"
+    fi
+
+    exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
+
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
+
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
+
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      fi
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+# Shorthand for --mode=foo, only valid as the first argument
+case $1 in
+clean|clea|cle|cl)
+  shift; set dummy --mode clean ${1+"$@"}; shift
+  ;;
+compile|compil|compi|comp|com|co|c)
+  shift; set dummy --mode compile ${1+"$@"}; shift
+  ;;
+execute|execut|execu|exec|exe|ex|e)
+  shift; set dummy --mode execute ${1+"$@"}; shift
+  ;;
+finish|finis|fini|fin|fi|f)
+  shift; set dummy --mode finish ${1+"$@"}; shift
+  ;;
+install|instal|insta|inst|ins|in|i)
+  shift; set dummy --mode install ${1+"$@"}; shift
+  ;;
+link|lin|li|l)
+  shift; set dummy --mode link ${1+"$@"}; shift
+  ;;
+uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+  shift; set dummy --mode uninstall ${1+"$@"}; shift
+  ;;
+esac
+
+
+
+# Option defaults:
+opt_debug=:
+opt_dry_run=false
+opt_config=false
+opt_preserve_dup_deps=false
+opt_features=false
+opt_finish=false
+opt_help=false
+opt_help_all=false
+opt_silent=:
+opt_warning=:
+opt_verbose=:
+opt_silent=false
+opt_verbose=false
+
+
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+  # this just eases exit handling
+  while test $# -gt 0; do
+    opt="$1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+      --dry-run|--dryrun|-n)
+			opt_dry_run=:
+			;;
+      --config)
+			opt_config=:
+func_config
+			;;
+      --dlopen|-dlopen)
+			optarg="$1"
+			opt_dlopen="${opt_dlopen+$opt_dlopen
+}$optarg"
+			shift
+			;;
+      --preserve-dup-deps)
+			opt_preserve_dup_deps=:
+			;;
+      --features)
+			opt_features=:
+func_features
+			;;
+      --finish)
+			opt_finish=:
+set dummy --mode finish ${1+"$@"}; shift
+			;;
+      --help)
+			opt_help=:
+			;;
+      --help-all)
+			opt_help_all=:
+opt_help=': help-all'
+			;;
+      --mode)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_mode="$optarg"
+case $optarg in
+  # Valid mode arguments:
+  clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+  # Catch anything else as an error
+  *) func_error "invalid argument for $opt"
+     exit_cmd=exit
+     break
+     ;;
+esac
+			shift
+			;;
+      --no-silent|--no-quiet)
+			opt_silent=false
+func_append preserve_args " $opt"
+			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+func_append preserve_args " $opt"
+			;;
+      --no-verbose)
+			opt_verbose=false
+func_append preserve_args " $opt"
+			;;
+      --silent|--quiet)
+			opt_silent=:
+func_append preserve_args " $opt"
+        opt_verbose=false
+			;;
+      --verbose|-v)
+			opt_verbose=:
+func_append preserve_args " $opt"
+opt_silent=false
+			;;
+      --tag)
+			test $# = 0 && func_missing_arg $opt && break
+			optarg="$1"
+			opt_tag="$optarg"
+func_append preserve_args " $opt $optarg"
+func_enable_tag "$optarg"
+			shift
+			;;
+
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      # Separate non-argument short options:
+      -\?*|-h*|-n*|-v*)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    esac
+  done
+
+  # Validate options:
+
+  # save first non-option argument
+  if test "$#" -gt 0; then
+    nonopt="$opt"
+    shift
+  fi
+
+  # preserve --debug
+  test "$opt_debug" = : || func_append preserve_args " --debug"
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
+      ;;
+    *)
+      opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+      ;;
+  esac
+
+  $opt_help || {
+    # Sanity checks first:
+    func_check_version_match
+
+    if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+      func_fatal_configuration "not configured to build any kind of library"
+    fi
+
+    # Darwin sucks
+    eval std_shrext=\"$shrext_cmds\"
+
+    # Only execute mode is allowed to have -dlopen flags.
+    if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
+      func_error "unrecognized option \`-dlopen'"
+      $ECHO "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Change the help message to a mode-specific one.
+    generic_help="$help"
+    help="Try \`$progname --help --mode=$opt_mode' for more information."
+  }
+
+
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_dirname_and_basename "$1" "" "."
+    func_stripname '' '.exe' "$func_basename_result"
+    func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot.  Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+  func_resolve_sysroot_result=$1
+  case $func_resolve_sysroot_result in
+  =*)
+    func_stripname '=' '' "$func_resolve_sysroot_result"
+    func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+    ;;
+  esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+  case "$lt_sysroot:$1" in
+  ?*:"$lt_sysroot"*)
+    func_stripname "$lt_sysroot" '' "$1"
+    func_replace_sysroot_result="=$func_stripname_result"
+    ;;
+  *)
+    # Including no sysroot.
+    func_replace_sysroot_result=$1
+    ;;
+  esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $opt_debug
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	func_append_quoted CC_quoted "$arg"
+      done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_append_quoted CC_quoted "$arg"
+	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
+	    case "$@ " in
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
+    else
+      write_lobj=none
+    fi
+
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+  $opt_debug
+  func_convert_core_file_wine_to_w32_result="$1"
+  if test -n "$1"; then
+    # Unfortunately, winepath does not exit with a non-zero error code, so we
+    # are forced to check the contents of stdout. On the other hand, if the
+    # command is not found, the shell will set an exit code of 127 and print
+    # *an error message* to stdout. So we must check for both error code of
+    # zero AND non-empty stdout, which explains the odd construction:
+    func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+    if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+      func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+        $SED -e "$lt_sed_naive_backslashify"`
+    else
+      func_convert_core_file_wine_to_w32_result=
+    fi
+  fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+  $opt_debug
+  # unfortunately, winepath doesn't convert paths, only file names
+  func_convert_core_path_wine_to_w32_result=""
+  if test -n "$1"; then
+    oldIFS=$IFS
+    IFS=:
+    for func_convert_core_path_wine_to_w32_f in $1; do
+      IFS=$oldIFS
+      func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+      if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+        if test -z "$func_convert_core_path_wine_to_w32_result"; then
+          func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+        else
+          func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+        fi
+      fi
+    done
+    IFS=$oldIFS
+  fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+  $opt_debug
+  if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+    func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+    if test "$?" -ne 0; then
+      # on failure, ensure result is empty
+      func_cygpath_result=
+    fi
+  else
+    func_cygpath_result=
+    func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+  fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format.  Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+  $opt_debug
+  # awkward: cmd appends spaces to result
+  func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+    $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+  $opt_debug
+  if test -z "$2" && test -n "$1" ; then
+    func_error "Could not determine host file name corresponding to"
+    func_error "  \`$1'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback:
+    func_to_host_file_result="$1"
+  fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+  $opt_debug
+  if test -z "$4" && test -n "$3"; then
+    func_error "Could not determine the host path corresponding to"
+    func_error "  \`$3'"
+    func_error "Continuing, but uninstalled executables may not work."
+    # Fallback.  This is a deliberately simplistic "conversion" and
+    # should not be "improved".  See libtool.info.
+    if test "x$1" != "x$2"; then
+      lt_replace_pathsep_chars="s|$1|$2|g"
+      func_to_host_path_result=`echo "$3" |
+        $SED -e "$lt_replace_pathsep_chars"`
+    else
+      func_to_host_path_result="$3"
+    fi
+  fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+  $opt_debug
+  case $4 in
+  $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+    ;;
+  esac
+  case $4 in
+  $2 ) func_append func_to_host_path_result "$3"
+    ;;
+  esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via `$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+  $opt_debug
+  $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result.  If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+  $opt_debug
+  case ,$2, in
+    *,"$to_tool_file_cmd",*)
+      func_to_tool_file_result=$1
+      ;;
+    *)
+      $to_tool_file_cmd "$1"
+      func_to_tool_file_result=$func_to_host_file_result
+      ;;
+  esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+  func_to_host_file_result="$1"
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+    # LT_CYGPATH in this case.
+    func_to_host_file_result=`cygpath -m "$1"`
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format.  Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_file_wine_to_w32 "$1"
+    func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    func_convert_core_msys_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_msys_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format.  Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set.  Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_file_result="$1"
+  if test -n "$1"; then
+    # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+    func_convert_core_file_wine_to_w32 "$1"
+    func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+    func_to_host_file_result="$func_cygpath_result"
+  fi
+  func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via `$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format.  If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+#   file name conversion function    : func_convert_file_X_to_Y ()
+#   path conversion function         : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same.  If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+  $opt_debug
+  if test -z "$to_host_path_cmd"; then
+    func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+    to_host_path_cmd="func_convert_path_${func_stripname_result}"
+  fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+  $opt_debug
+  func_init_to_host_path_cmd
+  $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+  func_to_host_path_result="$1"
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper.  Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from ARG.  MSYS
+    # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+    # and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format.  Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format.  Requires a wine environment and
+# a working winepath.  Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+    func_convert_path_check : ";" \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+  fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format.  Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # See func_convert_path_msys_to_w32:
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format.  Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set.  Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+  $opt_debug
+  func_to_host_path_result="$1"
+  if test -n "$1"; then
+    # Remove leading and trailing path separator characters from
+    # ARG. msys behavior is inconsistent here, cygpath turns them
+    # into '.;' and ';.', and winepath ignores them completely.
+    func_stripname : : "$1"
+    func_to_host_path_tmp1=$func_stripname_result
+    func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+    func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+    func_to_host_path_result="$func_cygpath_result"
+    func_convert_path_check : : \
+      "$func_to_host_path_tmp1" "$func_to_host_path_result"
+    func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+  fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          func_append pie_flag " $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  func_append later " $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+	  for arg in $args; do
+	    IFS="$save_ifs"
+	    func_append_quoted lastarg "$arg"
+	  done
+	  IFS="$save_ifs"
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
+
+	  # Add the arguments to base_compile.
+	  func_append base_compile " $lastarg"
+	  continue
+	  ;;
+
+	*)
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      func_append_quoted base_compile "$lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      func_fatal_error "you must specify an argument for -Xcompile"
+      ;;
+    target)
+      func_fatal_error "you must specify a target with \`-o'"
+      ;;
+    *)
+      # Get the name of the library object.
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    case $libobj in
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
+    esac
+
+    case $libobj in
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+    *)
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
+      -static)
+	build_libtool_libs=no
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
+    lobj=${xdir}$objdir/$objname
+
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	$ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+      func_append removelist " $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
+    fi
+
+    $opt_dry_run || $RM $removelist
+    func_append removelist " $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+    func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+    srcfile=$func_to_tool_file_result
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      func_mkdir_p "$xdir$objdir"
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	func_append command " -o $lobj"
+      fi
+
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+	suppress_output=' >/dev/null 2>&1'
+      fi
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile$pie_flag"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	func_append command " -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      func_append command "$suppress_output"
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$opt_dry_run || $RM $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+      fi
+    fi
+
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
+
+    exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+  test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $opt_mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
+
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
+
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
+
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
+
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
+
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+        ;;
+
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
+
+      *)
+        func_fatal_help "invalid operation mode \`$opt_mode'"
+        ;;
+    esac
+
+    echo
+    $ECHO "Try \`$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test "$opt_help" = :; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for opt_mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    sed '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
+
+    # Handle -dlopen flags immediately.
+    for file in $opt_dlopen; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
+
+      dir=
+      case $file in
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  func_append dir "/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
+	;;
+
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -* | *.la | *.lo ) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_append_quoted args "$file"
+    done
+
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
+	      else
+		$lt_unset $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	echo "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libs=
+    libdirs=
+    admincmds=
+
+    for opt in "$nonopt" ${1+"$@"}
+    do
+      if test -d "$opt"; then
+	func_append libdirs " $opt"
+
+      elif test -f "$opt"; then
+	if func_lalib_unsafe_p "$opt"; then
+	  func_append libs " $opt"
+	else
+	  func_warning "\`$opt' is not a valid libtool archive"
+	fi
+
+      else
+	func_fatal_error "invalid argument \`$opt'"
+      fi
+    done
+
+    if test -n "$libs"; then
+      if test -n "$lt_sysroot"; then
+        sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+        sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+      else
+        sysroot_cmd=
+      fi
+
+      # Remove sysroot references
+      if $opt_dry_run; then
+        for lib in $libs; do
+          echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+        done
+      else
+        tmpdir=`func_mktempdir`
+        for lib in $libs; do
+	  sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+	    > $tmpdir/tmp-la
+	  mv -f $tmpdir/tmp-la $lib
+	done
+        ${RM}r "$tmpdir"
+      fi
+    fi
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || func_append admincmds "
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      echo "----------------------------------------------------------------------"
+      echo "Libraries have been installed in:"
+      for libdir in $libdirs; do
+	$ECHO "   $libdir"
+      done
+      echo
+      echo "If you ever happen to want to link against installed libraries"
+      echo "in a given directory, LIBDIR, you must either use libtool, and"
+      echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+      echo "flag during linking and do at least one of the following:"
+      if test -n "$shlibpath_var"; then
+	echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+	echo "     during execution"
+      fi
+      if test -n "$runpath_var"; then
+	echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+	echo "     during linking"
+      fi
+      if test -n "$hardcode_libdir_flag_spec"; then
+	libdir=LIBDIR
+	eval flag=\"$hardcode_libdir_flag_spec\"
+
+	$ECHO "   - use the \`$flag' linker flag"
+      fi
+      if test -n "$admincmds"; then
+	$ECHO "   - have your system administrator run these commands:$admincmds"
+      fi
+      if test -f /etc/ld.so.conf; then
+	echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      fi
+      echo
+
+      echo "See any operating system documentation about shared libraries for"
+      case $host in
+	solaris2.[6789]|solaris2.1[0-9])
+	  echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	  echo "pages."
+	  ;;
+	*)
+	  echo "more information, such as the ld(1) and ld.so(8) manual pages."
+	  ;;
+      esac
+      echo "----------------------------------------------------------------------"
+    fi
+    exit $EXIT_SUCCESS
+}
+
+test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       case $nonopt in *shtool*) :;; *) false;; esac; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    func_append install_prog "$func_quote_for_eval_result"
+    install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    no_mode=:
+    for arg
+    do
+      arg2=
+      if test -n "$dest"; then
+	func_append files " $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  if test "x$prev" = x-m && test -n "$install_override_mode"; then
+	    arg2=$install_override_mode
+	    no_mode=false
+	  fi
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      func_append install_prog " $func_quote_for_eval_result"
+      if test -n "$arg2"; then
+	func_quote_for_eval "$arg2"
+      fi
+      func_append install_shared_prog " $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -n "$install_override_mode" && $no_mode; then
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	func_append install_shared_prog " -m $func_quote_for_eval_result"
+      fi
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
+      fi
+    fi
+
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	func_append staticlibs " $file"
+	;;
+
+      *.la)
+	func_resolve_sysroot "$file"
+	file=$func_resolve_sysroot_result
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append current_libdirs " $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) func_append future_libdirs " $libdir" ;;
+	  esac
+	fi
+
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	func_append dir "$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
+	    ;;
+	  esac
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
+	fi
+
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
+	  ;;
+	esac
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+      func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+      tool_oldlib=$func_to_tool_file_result
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$opt_mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+	    func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+	    $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
+	  fi
+
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
+	  else
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin* | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
+	  fi
+	fi
+
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+          case $host in
+	    *cygwin* | *mingw* | *cegcc* )
+	      # if an import library, we need to obtain dlname
+	      if func_win32_import_lib_p "$dlprefile"; then
+	        func_tr_sh "$dlprefile"
+	        eval "curr_lafile=\$libfile_$func_tr_sh_result"
+	        dlprefile_dlbasename=""
+	        if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+	          # Use subshell, to avoid clobbering current variable values
+	          dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+	          if test -n "$dlprefile_dlname" ; then
+	            func_basename "$dlprefile_dlname"
+	            dlprefile_dlbasename="$func_basename_result"
+	          else
+	            # no lafile. user explicitly requested -dlpreopen <import library>.
+	            $sharedlib_from_linklib_cmd "$dlprefile"
+	            dlprefile_dlbasename=$sharedlib_from_linklib_result
+	          fi
+	        fi
+	        $opt_dry_run || {
+	          if test -n "$dlprefile_dlbasename" ; then
+	            eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+	          else
+	            func_warning "Could not compute DLL name from $name"
+	            eval '$ECHO ": $name " >> "$nlist"'
+	          fi
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+	            $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+	        }
+	      else # not an import lib
+	        $opt_dry_run || {
+	          eval '$ECHO ": $name " >> "$nlist"'
+	          func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	          eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	        }
+	      fi
+	    ;;
+	    *)
+	      $opt_dry_run || {
+	        eval '$ECHO ": $name " >> "$nlist"'
+	        func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+	        eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	      }
+	    ;;
+          esac
+	done
+
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
+
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
+	  fi
+
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
+
+	  echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
+
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  echo >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
+
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
+	    fi
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) func_append symtab_cflags " $arg" ;;
+	  esac
+	done
+
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+    fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+      func_to_tool_file "$1" func_convert_file_msys_to_w32
+      win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+  $opt_debug
+  sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+  $opt_debug
+  match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+  $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+    $SED '/^Contents of section '"$match_literal"':/{
+      # Place marker at beginning of archive member dllname section
+      s/.*/====MARK====/
+      p
+      d
+    }
+    # These lines can sometimes be longer than 43 characters, but
+    # are always uninteresting
+    /:[	 ]*file format pe[i]\{,1\}-/d
+    /^In archive [^:]*:/d
+    # Ensure marker is printed
+    /^====MARK====/p
+    # Remove all lines with less than 43 characters
+    /^.\{43\}/!d
+    # From remaining lines, remove first 43 characters
+    s/^.\{43\}//' |
+    $SED -n '
+      # Join marker and all lines until next marker into a single line
+      /^====MARK====/ b para
+      H
+      $ b para
+      b
+      :para
+      x
+      s/\n//g
+      # Remove the marker
+      s/^====MARK====//
+      # Remove trailing dots and whitespace
+      s/[\. \t]*$//
+      # Print
+      /./p' |
+    # we now have a list, one entry per line, of the stringified
+    # contents of the appropriate section of all members of the
+    # archive which possess that section. Heuristic: eliminate
+    # all those which have a first or second character that is
+    # a '.' (that is, objdump's representation of an unprintable
+    # character.) This should work for all archives with less than
+    # 0x302f exports -- but will fail for DLLs whose name actually
+    # begins with a literal '.' or a single character followed by
+    # a '.'.
+    #
+    # Of those that remain, print the first one.
+    $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+  test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+  $opt_debug
+  func_to_tool_file "$1" func_convert_file_msys_to_w32
+  func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+  test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+#    $sharedlib_from_linklib_cmd
+# Result is available in the variable
+#    $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+  $opt_debug
+  if func_cygming_gnu_implib_p "$1" ; then
+    # binutils import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+  elif func_cygming_ms_implib_p "$1" ; then
+    # ms-generated import library
+    sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+  else
+    # unknown
+    sharedlib_from_linklib_result=""
+  fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    if test "$lock_old_archive_extraction" = yes; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test "$lock_old_archive_extraction" = yes; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+    done
+
+    func_extract_archives_result="$my_oldobjs"
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=${1-no}
+
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  case \" \$* \" in
+  *\\ --lt-*)
+    for lt_wr_arg
+    do
+      case \$lt_wr_arg in
+      --lt-*) ;;
+      *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+      esac
+      shift
+    done ;;
+  esac
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+  done
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
+
+	  $ECHO "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
+	else
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$ECHO "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# fixup the dll searchpath if we need to.
+	#
+	# Fix the DLL searchpath if we need to.  Do this before prepending
+	# to shlibpath, because on Windows, both are PATH and uninstalled
+	# libraries must come first.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+      func_exec_program \${1+\"\$@\"}
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+*/
+EOF
+	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+	    cat <<EOF
+volatile const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_path "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test -n "$dllsearchpath"; then
+              func_to_host_path "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_path_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
+	    fi
+
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+	    else
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+	    fi
+
+
+	    cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
+
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  newargz = XMALLOC (char *, argc + 1);
+
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
+
+	    cat <<"EOF"
+	  lt_dump_script (stdout);
+	  return 0;
+	}
+      if (strcmp (argv[i], debug_opt) == 0)
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
+EOF
+
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
+
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
+
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
+
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  /* Update the DLL searchpath.  EXE_PATH_VALUE ($dllsearchpath) must
+     be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+     because on Windows, both *_VARNAMEs are PATH but uninstalled
+     libraries must come first. */
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
+  for (i = 0; i < newargc; i++)
+    {
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
+    }
+
+EOF
+
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  newargz = prepare_spawn (newargz);
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
+
+	    cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable (const char *path)
+{
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
+
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
+
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
+  if ((!path) || (!*path))
+    return 0;
+
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
+
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
+
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
+	}
+    }
+  XFREE (tmp_pathspec);
+
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
+
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert (str != NULL);
+  assert (pat != NULL);
+
+  len = strlen (str);
+  patlen = strlen (pat);
+
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+  va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
+
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
+
+EOF
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+   Note that spawn() does not by itself call the command interpreter
+     (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+      ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+         GetVersionEx(&v);
+         v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+      }) ? "cmd.exe" : "command.com").
+   Instead it simply concatenates the arguments, separated by ' ', and calls
+   CreateProcess().  We must quote the arguments since Win32 CreateProcess()
+   interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+   special way:
+   - Space and tab are interpreted as delimiters. They are not treated as
+     delimiters if they are surrounded by double quotes: "...".
+   - Unescaped double quotes are removed from the input. Their only effect is
+     that within double quotes, space and tab are treated like normal
+     characters.
+   - Backslashes not followed by double quotes are not special.
+   - But 2*n+1 backslashes followed by a double quote become
+     n backslashes followed by a double quote (n >= 0):
+       \" -> "
+       \\\" -> \"
+       \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+  size_t argc;
+  char **new_argv;
+  size_t i;
+
+  /* Count number of arguments.  */
+  for (argc = 0; argv[argc] != NULL; argc++)
+    ;
+
+  /* Allocate new argument vector.  */
+  new_argv = XMALLOC (char *, argc + 1);
+
+  /* Put quoted arguments into the new argument vector.  */
+  for (i = 0; i < argc; i++)
+    {
+      const char *string = argv[i];
+
+      if (string[0] == '\0')
+	new_argv[i] = xstrdup ("\"\"");
+      else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+	{
+	  int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+	  size_t length;
+	  unsigned int backslashes;
+	  const char *s;
+	  char *quoted_string;
+	  char *p;
+
+	  length = 0;
+	  backslashes = 0;
+	  if (quote_around)
+	    length++;
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		length += backslashes + 1;
+	      length++;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    length += backslashes + 1;
+
+	  quoted_string = XMALLOC (char, length + 1);
+
+	  p = quoted_string;
+	  backslashes = 0;
+	  if (quote_around)
+	    *p++ = '"';
+	  for (s = string; *s != '\0'; s++)
+	    {
+	      char c = *s;
+	      if (c == '"')
+		{
+		  unsigned int j;
+		  for (j = backslashes + 1; j > 0; j--)
+		    *p++ = '\\';
+		}
+	      *p++ = c;
+	      if (c == '\\')
+		backslashes++;
+	      else
+		backslashes = 0;
+	    }
+	  if (quote_around)
+	    {
+	      unsigned int j;
+	      for (j = backslashes; j > 0; j--)
+		*p++ = '\\';
+	      *p++ = '"';
+	    }
+	  *p = '\0';
+
+	  new_argv[i] = quoted_string;
+	}
+      else
+	new_argv[i] = (char *) string;
+    }
+  new_argv[argc] = NULL;
+
+  return new_argv;
+}
+EOF
+		;;
+	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+	      $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/  fputs ("\1", f);/p
+g
+D'
+            cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $opt_debug
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    bindir=
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module="${wl}-single_module"
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	bindir)
+	  bindir="$arg"
+	  prev=
+	  continue
+	  ;;
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      func_append dlfiles " $arg"
+	    else
+	      func_append dlprefiles " $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) func_append deplibs " $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      func_append moreargs " $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		func_source "$arg"
+
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none &&
+		   test "$non_pic_object" = none; then
+		  func_fatal_error "cannot find name of object for \`$arg'"
+		fi
+
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      func_append dlfiles " $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    func_append dlprefiles " $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
+
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file \`$arg' does not exist"
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) func_append rpath " $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) func_append xrpath " $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  func_append weak_libs " $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  func_append compiler_flags " $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  func_append linker_flags " $qarg"
+	  func_append compiler_flags " $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework)
+	prev=framework
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	func_stripname "-L" '' "$arg"
+	if test -z "$func_stripname_result"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
+	  else
+	    func_fatal_error "need path for \`-L' option"
+	  fi
+	fi
+	func_resolve_sysroot "$func_stripname_result"
+	dir=$func_resolve_sysroot_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "* | *" $arg "*)
+	  # Will only happen for absolute or sysroot arguments
+	  ;;
+	*)
+	  # Preserve sysroot, but never include relative directories
+	  case $dir in
+	    [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+	    *) func_append deplibs " -L$dir" ;;
+	  esac
+	  func_append lib_search_path " $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) func_append dllsearchpath ":$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    func_append deplibs " System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	func_append deplibs " $arg"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot|--sysroot)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
+
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+      |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	func_append compiler_flags " $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) func_append new_inherited_linker_flags " $arg" ;;
+	esac
+	continue
+	;;
+
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	=*)
+	  func_stripname '=' '' "$dir"
+	  dir=$lt_sysroot$func_stripname_result
+	  ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) func_append xrpath " $dir" ;;
+	esac
+	continue
+	;;
+
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -weak)
+        prev=weak
+	continue
+	;;
+
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $func_quote_for_eval_result"
+	  func_append compiler_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  func_append arg " $wl$func_quote_for_eval_result"
+	  func_append compiler_flags " $wl$func_quote_for_eval_result"
+	  func_append linker_flags " $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
+      # --sysroot=*          for sysroot support
+      # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+      -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        func_append compiler_flags " $arg"
+        continue
+        ;;
+
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+
+      *.$objext)
+	# A standard object.
+	func_append objs " $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  func_source "$arg"
+
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none &&
+	     test "$non_pic_object" = none; then
+	    func_fatal_error "cannot find name of object for \`$arg'"
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		func_append dlfiles " $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      func_append dlprefiles " $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
+
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	func_append deplibs " $arg"
+	func_append old_deplibs " $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	func_resolve_sysroot "$arg"
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  func_append dlfiles " $func_resolve_sysroot_result"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  func_append dlprefiles " $func_resolve_sysroot_result"
+	  prev=
+	else
+	  func_append deplibs " $func_resolve_sysroot_result"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname="$func_basename_result"
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
+    func_to_tool_file "$output_objdir/"
+    tool_output_objdir=$func_to_tool_file_result
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_preserve_dup_deps ; then
+	case "$libs " in
+	*" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	esac
+      fi
+      func_append libs " $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+	  esac
+	  func_append pre_post_deps " $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  func_resolve_sysroot "$lib"
+	  case $lib in
+	  *.la)	func_source "$func_resolve_sysroot_result" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) func_append deplibs " $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+        |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    func_append compiler_flags " $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    func_warning "\`-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) func_append new_inherited_linker_flags " $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    func_append newlib_search_path " $func_resolve_sysroot_result"
+	    ;;
+	  *)
+	    func_warning "\`-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    func_stripname '-R' '' "$deplib"
+	    func_resolve_sysroot "$func_stripname_result"
+	    dir=$func_resolve_sysroot_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) func_append xrpath " $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la)
+	  func_resolve_sysroot "$deplib"
+	  lib=$func_resolve_sysroot_result
+	  ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=yes
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=yes
+		;;
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		echo
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
+	      else
+		echo
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      func_append newdlprefiles " $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      func_append newdlfiles " $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+	fi
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && func_append dlfiles " $dlopen"
+	  test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for \`$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    func_append convenience " $ladir/$objdir/$old_library"
+	    func_append old_convenience " $ladir/$objdir/$old_library"
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    func_fatal_error "\`$lib' is not a convenience library"
+	  fi
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    deplibs="$deplib $deplibs"
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	if test -n "$old_library" &&
+	   { test "$prefer_static_libs" = yes ||
+	     test "$prefer_static_libs,$installed" = "built,no"; }; then
+	  linklib=$old_library
+	else
+	  for l in $old_library $library_names; do
+	    linklib="$l"
+	  done
+	fi
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for \`$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    func_append dlprefiles " $lib $dependency_libs"
+	  else
+	    func_append newdlfiles " $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname="$func_basename_result"
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library \`$lib' was moved."
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$lt_sysroot$libdir"
+	    absdir="$lt_sysroot$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    func_append notinst_path " $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	  fi
+	  case "$host" in
+	    # special handling for platforms with PE-DLLs.
+	    *cygwin* | *mingw* | *cegcc* )
+	      # Linker will automatically link against shared library if both
+	      # static and shared are present.  Therefore, ensure we extract
+	      # symbols from the import library if a shared library is present
+	      # (otherwise, the dlopen module name will be incorrect).  We do
+	      # this by putting the import library name into $newdlprefiles.
+	      # We recover the dlopen module name by 'saving' the la file
+	      # name in a special purpose variable, and (later) extracting the
+	      # dlname from the la file.
+	      if test -n "$dlname"; then
+	        func_tr_sh "$dir/$linklib"
+	        eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+	        func_append newdlprefiles " $dir/$linklib"
+	      else
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      fi
+	    ;;
+	    * )
+	      # Prefer using a static library (so that no silly _DYNAMIC symbols
+	      # are required to link).
+	      if test -n "$old_library"; then
+	        func_append newdlprefiles " $dir/$old_library"
+	        # Keep a list of preopened convenience libraries to check
+	        # that they are being used correctly in the link pass.
+	        test -z "$libdir" && \
+	          func_append dlpreconveniencelibs " $dir/$old_library"
+	      # Otherwise, use the dlname, so that lt_dlopen finds it.
+	      elif test -n "$dlname"; then
+	        func_append newdlprefiles " $dir/$dlname"
+	      else
+	        func_append newdlprefiles " $dir/$linklib"
+	      fi
+	    ;;
+	  esac
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  func_append newlib_search_path " $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         func_resolve_sysroot "$func_stripname_result"
+	         func_append newlib_search_path " $func_resolve_sysroot_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) func_append temp_rpath "$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      func_append notinst_deplibs " $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      func_append notinst_deplibs " $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    echo
+	    if test "$linkmode" = prog; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) func_append compile_rpath " $absdir" ;;
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append finalize_rpath " $libdir" ;;
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$opt_mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$absdir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      func_append add_dir " -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) func_append compile_shlibpath "$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) func_append finalize_shlibpath "$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$opt_mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) func_append finalize_shlibpath "$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+		add="$inst_prefix_dir$libdir/$linklib"
+	      else
+		add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    func_append add_dir " -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    echo
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) func_append xrpath " $temp_xrpath";;
+		   esac;;
+	      *) func_append temp_deplibs " $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  func_append newlib_search_path " $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    case $deplib in
+              -L*) func_stripname '-L' '' "$deplib"
+                   func_resolve_sysroot "$func_stripname_result";;
+              *) func_resolve_sysroot "$deplib" ;;
+            esac
+	    if $opt_preserve_dup_deps ; then
+	      case "$tmp_libs " in
+	      *" $func_resolve_sysroot_result "*)
+                func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+	      esac
+	    fi
+	    func_append tmp_libs " $func_resolve_sysroot_result"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+	        func_resolve_sysroot "$deplib"
+	        deplib=$func_resolve_sysroot_result
+	        func_dirname "$deplib" "" "."
+		dir=$func_dirname_result
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of \`$dir'"
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path="-L$absdir/$objdir"
+		  ;;
+		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) func_append lib_search_path " $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) func_append tmp_libs " $deplib" ;;
+	      esac
+	      ;;
+	    *) func_append tmp_libs " $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  func_append tmp_libs " $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      func_append objs "$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	else
+	  echo
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  func_append libobjs " $objs"
+	fi
+      fi
+
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	shift
+	IFS="$save_ifs"
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  # correct linux to gnu/linux during the next big refactor
+	  darwin|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|qnx|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_minor"
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$1"
+	  revision="$2"
+	  age="$3"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	irix | nonstopux)
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux) # correct to gnu/linux during the next big refactor
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  func_append verstring ":${current}.0"
+	  ;;
+
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    func_warning "undefined symbols not allowed in $host shared libraries"
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      func_append libobjs " $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
+      if test "$opt_mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       func_append removelist " $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	func_append oldlibs " $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  func_replace_sysroot "$libdir"
+	  func_append temp_xrpath " -R$func_replace_sysroot_result"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) func_append dlfiles " $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) func_append dlprefiles " $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    func_append deplibs " System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      func_append deplibs " -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    func_append newdeplibs " $i"
+		    i=""
+		    ;;
+		  esac
+		fi
+		if test -n "$i" ; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    func_append newdeplibs " $i"
+		  else
+		    droppeddeps=yes
+		    echo
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      func_append newdeplibs " $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      func_append newdeplibs " $i"
+		    else
+		      droppeddeps=yes
+		      echo
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  echo
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		func_append newdeplibs " $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		if test -n "$file_magic_glob"; then
+		  libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+		else
+		  libnameglob=$libname
+		fi
+		test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  if test "$want_nocaseglob" = yes; then
+		    shopt -s nocaseglob
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		    $nocaseglob
+		  else
+		    potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+		  fi
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			func_append newdeplibs " $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  func_append newdeplibs " $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      func_append newdeplibs " $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		echo
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      func_append newdeplibs " $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+	    done
+	  fi
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	    ;;
+	  esac
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	# Remove ${wl} instances when linking with ld.
+	# FIXME: should test the right _cmds variable.
+	case $archive_cmds in
+	  *\$LD\ *) wl= ;;
+        esac
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		func_replace_sysroot "$libdir"
+		libdir=$func_replace_sysroot_result
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		func_append dep_rpath " $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) func_append perm_rpath " $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      func_append rpath "$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname="$1"
+	shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  func_append linknames " $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
+
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  func_append delfiles " $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd1 in $cmds; do
+	      IFS="$save_ifs"
+	      # Take the normal branch if the nm_file_list_spec branch
+	      # doesn't work or if tool conversion is not needed.
+	      case $nm_file_list_spec~$to_tool_file_cmd in
+		*~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+		  try_normal_branch=yes
+		  eval cmd=\"$cmd1\"
+		  func_len " $cmd"
+		  len=$func_len_result
+		  ;;
+		*)
+		  try_normal_branch=no
+		  ;;
+	      esac
+	      if test "$try_normal_branch" = yes \
+		 && { test "$len" -lt "$max_cmd_len" \
+		      || test "$max_cmd_len" -le -1; }
+	      then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      elif test -n "$nm_file_list_spec"; then
+		func_basename "$output"
+		output_la=$func_basename_result
+		save_libobjs=$libobjs
+		save_output=$output
+		output=${output_objdir}/${output_la}.nm
+		func_to_tool_file "$output"
+		libobjs=$nm_file_list_spec$func_to_tool_file_result
+		func_append delfiles " $output"
+		func_verbose "creating $NM input file list: $output"
+		for obj in $save_libobjs; do
+		  func_to_tool_file "$obj"
+		  $ECHO "$func_to_tool_file_result"
+		done > "$output"
+		eval cmd=\"$cmd1\"
+		func_show_eval "$cmd" 'exit $?'
+		output=$save_output
+		libobjs=$save_libobjs
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    func_append tmp_deplibs " $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs="$tmp_deplibs"
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    func_append generated " $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    func_append libobjs " $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	fi
+
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  func_append linker_flags " $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  func_basename "$output"
+	  output_la=$func_basename_result
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    echo 'INPUT (' > $output
+	    for obj in $save_libobjs
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    echo ')' >> $output
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$func_to_tool_file_result
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      func_to_tool_file "$obj"
+	      $ECHO "$func_to_tool_file_result" >> $output
+	    done
+	    func_append delfiles " $output"
+	    func_to_tool_file "$output"
+	    output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=" $obj"
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      func_append delfiles " $output"
+
+	    else
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    fi
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$opt_mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS="$save_ifs"
+
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
+	  fi
+	fi
+
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append libobjs " $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
+	fi
+
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$opt_mode" = relink; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$opt_mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for objects"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+	else
+	  gentop="$output_objdir/${obj}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # If we're not building shared, we need to use non_pic_objs
+      test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      func_execute_cmds "$reload_cmds" 'exit $?'
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	func_execute_cmds "$reload_cmds" 'exit $?'
+      fi
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
+
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	;;
+      esac
+
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      func_append compile_command " ${wl}-bind_at_load"
+	      func_append finalize_command " ${wl}-bind_at_load"
+	    ;;
+	  esac
+	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    func_append new_libs " -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) func_append new_libs " $deplib" ;;
+	  esac
+	  ;;
+	*) func_append new_libs " $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      func_append compile_command " $compile_deplibs"
+      func_append finalize_command " $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_rpath " $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append perm_rpath " $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) func_append dllsearchpath ":$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) func_append dllsearchpath ":$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    func_append rpath " $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) func_append finalize_perm_rpath " $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+      fi
+
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
+
+      wrappers_required=yes
+      case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
+	# Replace the output file specification.
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+	fi
+
+	exit $exit_status
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    func_append rpath "$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
+
+	if test -n "$postlink_cmds"; then
+	  func_to_tool_file "$output"
+	  postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	  func_execute_cmds "$postlink_cmds" 'exit $?'
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      func_show_eval "$link_command" 'exit $?'
+
+      if test -n "$postlink_cmds"; then
+	func_to_tool_file "$output_objdir/$outputname"
+	postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+	func_execute_cmds "$postlink_cmds" 'exit $?'
+      fi
+
+      # Now create the wrapper script.
+      func_verbose "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
+
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save $symfileobj"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    func_append oldobjs " $symfileobj"
+	  fi
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	func_append generated " $gentop"
+
+	func_extract_archives $gentop $addlibs
+	func_append oldobjs " $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	cmds=$old_archive_from_new_cmds
+      else
+
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+
+	  func_extract_archives $gentop $dlprefiles
+	  func_append oldobjs " $func_extract_archives_result"
+	fi
+
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  echo "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  func_append generated " $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      func_append oldobjs " $gentop/$newobj"
+	      ;;
+	    *) func_append oldobjs " $obj" ;;
+	    esac
+	  done
+	fi
+	func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+	tool_oldlib=$func_to_tool_file_result
+	eval cmds=\"$old_archive_cmds\"
+
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	elif test -n "$archiver_list_spec"; then
+	  func_verbose "using command file archive linking..."
+	  for obj in $oldobjs
+	  do
+	    func_to_tool_file "$obj"
+	    $ECHO "$func_to_tool_file_result"
+	  done > $output_objdir/$libname.libcmd
+	  func_to_tool_file "$output_objdir/$libname.libcmd"
+	  oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
+    done
+
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      func_verbose "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name="$func_basename_result"
+		func_resolve_sysroot "$deplib"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      -L*)
+		func_stripname -L '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -L$func_replace_sysroot_result"
+		;;
+	      -R*)
+		func_stripname -R '' "$deplib"
+		func_replace_sysroot "$func_stripname_result"
+		func_append newdependency_libs " -R$func_replace_sysroot_result"
+		;;
+	      *) func_append newdependency_libs " $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      *) func_append newdlfiles " $lib" ;;
+	      esac
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlfiles " $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      func_append newdlprefiles " $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test "x$bindir" != x ;
+	      then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
+
+{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
+    func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) func_append RM " $arg"; rmforce=yes ;;
+      -*) func_append RM " $arg" ;;
+      *) func_append files " $arg" ;;
+      esac
+    done
+
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
+
+    rmdirs=
+
+    for file in $files; do
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
+	odir="$objdir"
+      else
+	odir="$dir/$objdir"
+      fi
+      func_basename "$file"
+      name="$func_basename_result"
+      test "$opt_mode" = uninstall && odir="$dir"
+
+      # Remember odir for removal later, being careful to avoid duplicates
+      if test "$opt_mode" = clean; then
+	case " $rmdirs " in
+	  *" $odir "*) ;;
+	  *) func_append rmdirs " $odir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    func_append rmfiles " $odir/$n"
+	  done
+	  test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+	  case "$opt_mode" in
+	  clean)
+	    case " $library_names " in
+	    *" $dlname "*) ;;
+	    *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+	    esac
+	    test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if func_lalib_p "$file"; then
+
+	  # Read the .lo file
+	  func_source $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
+	    func_append rmfiles " $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
+	    func_append rmfiles " $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test "$opt_mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    func_append rmfiles " $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      func_append rmfiles " $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      func_append rmfiles " $odir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      func_append rmfiles " $odir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
+    done
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
+      fi
+    done
+
+    exit $exit_status
+}
+
+{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
+
+test -z "$opt_mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$opt_mode'"
+
+if test -n "$exec_cmd"; then
+  eval exec "$exec_cmd"
+  exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
diff --git a/libltdl/config/mdate-sh b/libltdl/config/mdate-sh
new file mode 100755
index 0000000..e631b22
--- /dev/null
+++ b/libltdl/config/mdate-sh
@@ -0,0 +1,205 @@
+#!/bin/sh
+# Get modification time of a file or directory and pretty-print it.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1995, 1996, 1997, 2003, 2004, 2005, 2007, 2009 Free
+# Software Foundation, Inc.
+# written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, June 1995
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+  '')
+     echo "$0: No file.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: mdate-sh [--help] [--version] FILE
+
+Pretty-print the modification time of FILE.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "mdate-sh $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Prevent date giving response in another language.
+LANG=C
+export LANG
+LC_ALL=C
+export LC_ALL
+LC_TIME=C
+export LC_TIME
+
+# GNU ls changes its time format in response to the TIME_STYLE
+# variable.  Since we cannot assume `unset' works, revert this
+# variable to its documented default.
+if test "${TIME_STYLE+set}" = set; then
+  TIME_STYLE=posix-long-iso
+  export TIME_STYLE
+fi
+
+save_arg1=$1
+
+# Find out how to get the extended ls output of a file or directory.
+if ls -L /dev/null 1>/dev/null 2>&1; then
+  ls_command='ls -L -l -d'
+else
+  ls_command='ls -l -d'
+fi
+# Avoid user/group names that might have spaces, when possible.
+if ls -n /dev/null 1>/dev/null 2>&1; then
+  ls_command="$ls_command -n"
+fi
+
+# A `ls -l' line looks as follows on OS/2.
+#  drwxrwx---        0 Aug 11  2001 foo
+# This differs from Unix, which adds ownership information.
+#  drwxrwx---   2 root  root      4096 Aug 11  2001 foo
+#
+# To find the date, we split the line on spaces and iterate on words
+# until we find a month.  This cannot work with files whose owner is a
+# user named `Jan', or `Feb', etc.  However, it's unlikely that `/'
+# will be owned by a user whose name is a month.  So we first look at
+# the extended ls output of the root directory to decide how many
+# words should be skipped to get the date.
+
+# On HPUX /bin/sh, "set" interprets "-rw-r--r--" as options, so the "x" below.
+set x`$ls_command /`
+
+# Find which argument is the month.
+month=
+command=
+until test $month
+do
+  shift
+  # Add another shift to the command.
+  command="$command shift;"
+  case $1 in
+    Jan) month=January; nummonth=1;;
+    Feb) month=February; nummonth=2;;
+    Mar) month=March; nummonth=3;;
+    Apr) month=April; nummonth=4;;
+    May) month=May; nummonth=5;;
+    Jun) month=June; nummonth=6;;
+    Jul) month=July; nummonth=7;;
+    Aug) month=August; nummonth=8;;
+    Sep) month=September; nummonth=9;;
+    Oct) month=October; nummonth=10;;
+    Nov) month=November; nummonth=11;;
+    Dec) month=December; nummonth=12;;
+  esac
+done
+
+# Get the extended ls output of the file or directory.
+set dummy x`eval "$ls_command \"\$save_arg1\""`
+
+# Remove all preceding arguments
+eval $command
+
+# Because of the dummy argument above, month is in $2.
+#
+# On a POSIX system, we should have
+#
+# $# = 5
+# $1 = file size
+# $2 = month
+# $3 = day
+# $4 = year or time
+# $5 = filename
+#
+# On Darwin 7.7.0 and 7.6.0, we have
+#
+# $# = 4
+# $1 = day
+# $2 = month
+# $3 = year or time
+# $4 = filename
+
+# Get the month.
+case $2 in
+  Jan) month=January; nummonth=1;;
+  Feb) month=February; nummonth=2;;
+  Mar) month=March; nummonth=3;;
+  Apr) month=April; nummonth=4;;
+  May) month=May; nummonth=5;;
+  Jun) month=June; nummonth=6;;
+  Jul) month=July; nummonth=7;;
+  Aug) month=August; nummonth=8;;
+  Sep) month=September; nummonth=9;;
+  Oct) month=October; nummonth=10;;
+  Nov) month=November; nummonth=11;;
+  Dec) month=December; nummonth=12;;
+esac
+
+case $3 in
+  ???*) day=$1;;
+  *) day=$3; shift;;
+esac
+
+# Here we have to deal with the problem that the ls output gives either
+# the time of day or the year.
+case $3 in
+  *:*) set `date`; eval year=\$$#
+       case $2 in
+	 Jan) nummonthtod=1;;
+	 Feb) nummonthtod=2;;
+	 Mar) nummonthtod=3;;
+	 Apr) nummonthtod=4;;
+	 May) nummonthtod=5;;
+	 Jun) nummonthtod=6;;
+	 Jul) nummonthtod=7;;
+	 Aug) nummonthtod=8;;
+	 Sep) nummonthtod=9;;
+	 Oct) nummonthtod=10;;
+	 Nov) nummonthtod=11;;
+	 Dec) nummonthtod=12;;
+       esac
+       # For the first six month of the year the time notation can also
+       # be used for files modified in the last year.
+       if (expr $nummonth \> $nummonthtod) > /dev/null;
+       then
+	 year=`expr $year - 1`
+       fi;;
+  *) year=$3;;
+esac
+
+# The result.
+echo $day $month $year
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/libltdl/config/missing b/libltdl/config/missing
new file mode 100755
index 0000000..28055d2
--- /dev/null
+++ b/libltdl/config/missing
@@ -0,0 +1,376 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar*)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te*)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison*|yacc*)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f y.tab.h; then
+	echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex*|flex*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f lex.yy.c; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit $?
+    fi
+    ;;
+
+  makeinfo*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar*)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case $firstarg in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case $firstarg in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/libltdl/config/mkstamp b/libltdl/config/mkstamp
new file mode 100755
index 0000000..edd5be1
--- /dev/null
+++ b/libltdl/config/mkstamp
@@ -0,0 +1,48 @@
+#! /bin/sh
+
+#   mkstamp - extract data from Revision and Date RCS tags in a file
+#   Copyright (C) 1999, 2003 Free Software Foundation, Inc.
+#   Written by Alexandre Oliva, 1999
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# This script takes a directory as an argument and generates a
+# revision and date based upon the ChangeLog files in that directory.
+
+# Generate a revision that looks similar to CVS revision by using 1.
+# then the number of lines in the ChangeLogs starting with dates (an
+# approximation of the number of commits) + 1000. 
+# For those pulling from the savannah git repository it should be
+# possible to go from this revision number to the git revision fairly
+# easily. The number will also always increase.
+
+awk 'BEGIN {
+	cocount=0;
+}
+/[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9]  / {
+        if (cocount== 0) {
+                datestr=$1
+        }
+	cocount++;
+}
+END {
+	cocount = cocount + 1000;
+        print "1." cocount " " datestr;
+}' $1/ChangeLog $1/ChangeLog.[12][0-9][0-9][0-9]
diff --git a/libltdl/config/texinfo.tex b/libltdl/config/texinfo.tex
new file mode 100644
index 0000000..3298298
--- /dev/null
+++ b/libltdl/config/texinfo.tex
@@ -0,0 +1,9872 @@
+% texinfo.tex -- TeX macros to handle Texinfo files.
+% 
+% Load plain if necessary, i.e., if running under initex.
+\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
+%
+\def\texinfoversion{2011-09-23.09}
+%
+% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
+% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
+% 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+%
+% This texinfo.tex file is free software: you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation, either version 3 of the
+% License, or (at your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this program.  If not, see <http://www.gnu.org/licenses/>.
+%
+% As a special exception, when this file is read by TeX when processing
+% a Texinfo source document, you may use the result without
+% restriction.  (This has been our intent since Texinfo was invented.)
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+%   http://www.gnu.org/software/texinfo/ (the Texinfo home page), or
+%   ftp://tug.org/tex/texinfo.tex
+%     (and all CTAN mirrors, see http://www.ctan.org).
+% The texinfo.tex in any given distribution could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org.  Please include including a
+% complete document in each bug report with which we can reproduce the
+% problem.  Patches are, of course, greatly appreciated.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution.  For a simple
+% manual foo.texi, however, you can get away with this:
+%   tex foo.texi
+%   texindex foo.??
+%   tex foo.texi
+%   tex foo.texi
+%   dvips foo.dvi -o  # or whatever; this makes foo.ps.
+% The extra TeX runs get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+%
+% It is possible to adapt texinfo.tex for other languages, to some
+% extent.  You can get the existing language-specific files from the
+% full Texinfo distribution.
+%
+% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+
+
+\message{Loading texinfo [version \texinfoversion]:}
+
+% If in a .fmt file, print the version number
+% and turn on active characters that we couldn't do earlier because
+% they might have appeared in the input file name.
+\everyjob{\message{[Texinfo version \texinfoversion]}%
+  \catcode`+=\active \catcode`\_=\active}
+
+\chardef\other=12
+
+% We never want plain's \outer definition of \+ in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
+
+% Save some plain tex macros whose names we will redefine.
+\let\ptexb=\b
+\let\ptexbullet=\bullet
+\let\ptexc=\c
+\let\ptexcomma=\,
+\let\ptexdot=\.
+\let\ptexdots=\dots
+\let\ptexend=\end
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
+\let\ptexfootnote=\footnote
+\let\ptexgtr=>
+\let\ptexhat=^
+\let\ptexi=\i
+\let\ptexindent=\indent
+\let\ptexinsert=\insert
+\let\ptexlbrace=\{
+\let\ptexless=<
+\let\ptexnewwrite\newwrite
+\let\ptexnoindent=\noindent
+\let\ptexplus=+
+\let\ptexraggedright=\raggedright
+\let\ptexrbrace=\}
+\let\ptexslash=\/
+\let\ptexstar=\*
+\let\ptext=\t
+\let\ptextop=\top
+{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode
+
+% If this character appears in an error message or help string, it
+% starts a new line in the output.
+\newlinechar = `^^J
+
+% Use TeX 3.0's \inputlineno to get the line number, for better error
+% messages, but if we're using an old version of TeX, don't do anything.
+%
+\ifx\inputlineno\thisisundefined
+  \let\linenumber = \empty % Pre-3.0.
+\else
+  \def\linenumber{l.\the\inputlineno:\space}
+\fi
+
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined  \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined   \gdef\putwordChapter{Chapter}\fi
+\ifx\putwordfile\undefined      \gdef\putwordfile{file}\fi
+\ifx\putwordin\undefined        \gdef\putwordin{in}\fi
+\ifx\putwordIndexIsEmpty\undefined       \gdef\putwordIndexIsEmpty{(Index is empty)}\fi
+\ifx\putwordIndexNonexistent\undefined   \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi
+\ifx\putwordInfo\undefined      \gdef\putwordInfo{Info}\fi
+\ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi
+\ifx\putwordMethodon\undefined  \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordNoTitle\undefined   \gdef\putwordNoTitle{No Title}\fi
+\ifx\putwordof\undefined        \gdef\putwordof{of}\fi
+\ifx\putwordon\undefined        \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined      \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined   \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined   \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined       \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined       \gdef\putwordSee{See}\fi
+\ifx\putwordShortTOC\undefined  \gdef\putwordShortTOC{Short Contents}\fi
+\ifx\putwordTOC\undefined       \gdef\putwordTOC{Table of Contents}\fi
+%
+\ifx\putwordMJan\undefined \gdef\putwordMJan{January}\fi
+\ifx\putwordMFeb\undefined \gdef\putwordMFeb{February}\fi
+\ifx\putwordMMar\undefined \gdef\putwordMMar{March}\fi
+\ifx\putwordMApr\undefined \gdef\putwordMApr{April}\fi
+\ifx\putwordMMay\undefined \gdef\putwordMMay{May}\fi
+\ifx\putwordMJun\undefined \gdef\putwordMJun{June}\fi
+\ifx\putwordMJul\undefined \gdef\putwordMJul{July}\fi
+\ifx\putwordMAug\undefined \gdef\putwordMAug{August}\fi
+\ifx\putwordMSep\undefined \gdef\putwordMSep{September}\fi
+\ifx\putwordMOct\undefined \gdef\putwordMOct{October}\fi
+\ifx\putwordMNov\undefined \gdef\putwordMNov{November}\fi
+\ifx\putwordMDec\undefined \gdef\putwordMDec{December}\fi
+%
+\ifx\putwordDefmac\undefined    \gdef\putwordDefmac{Macro}\fi
+\ifx\putwordDefspec\undefined   \gdef\putwordDefspec{Special Form}\fi
+\ifx\putwordDefvar\undefined    \gdef\putwordDefvar{Variable}\fi
+\ifx\putwordDefopt\undefined    \gdef\putwordDefopt{User Option}\fi
+\ifx\putwordDeffunc\undefined   \gdef\putwordDeffunc{Function}\fi
+
+% Since the category of space is not known, we have to be careful.
+\chardef\spacecat = 10
+\def\spaceisspace{\catcode`\ =\spacecat}
+
+% sometimes characters are active, so we need control sequences.
+\chardef\ampChar   = `\&
+\chardef\colonChar = `\:
+\chardef\commaChar = `\,
+\chardef\dashChar  = `\-
+\chardef\dotChar   = `\.
+\chardef\exclamChar= `\!
+\chardef\hashChar  = `\#
+\chardef\lquoteChar= `\`
+\chardef\questChar = `\?
+\chardef\rquoteChar= `\'
+\chardef\semiChar  = `\;
+\chardef\slashChar = `\/
+\chardef\underChar = `\_
+
+% Ignore a token.
+%
+\def\gobble#1{}
+
+% The following is used inside several \edef's.
+\def\makecsname#1{\expandafter\noexpand\csname#1\endcsname}
+
+% Hyphenation fixes.
+\hyphenation{
+  Flor-i-da Ghost-script Ghost-view Mac-OS Post-Script
+  ap-pen-dix bit-map bit-maps
+  data-base data-bases eshell fall-ing half-way long-est man-u-script
+  man-u-scripts mini-buf-fer mini-buf-fers over-view par-a-digm
+  par-a-digms rath-er rec-tan-gu-lar ro-bot-ics se-vere-ly set-up spa-ces
+  spell-ing spell-ings
+  stand-alone strong-est time-stamp time-stamps which-ever white-space
+  wide-spread wrap-around
+}
+
+% Margin to add to right of even pages, to left of odd pages.
+\newdimen\bindingoffset
+\newdimen\normaloffset
+\newdimen\pagewidth \newdimen\pageheight
+
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt }
+
+% Sometimes it is convenient to have everything in the transcript file
+% and nothing on the terminal.  We don't just call \tracingall here,
+% since that produces some useless output on the terminal.  We also make
+% some effort to order the tracing commands to reduce output in the log
+% file; cf. trace.sty in LaTeX.
+%
+\def\gloggingall{\begingroup \globaldefs = 1 \loggingall \endgroup}%
+\def\loggingall{%
+  \tracingstats2
+  \tracingpages1
+  \tracinglostchars2  % 2 gives us more in etex
+  \tracingparagraphs1
+  \tracingoutput1
+  \tracingmacros2
+  \tracingrestores1
+  \showboxbreadth\maxdimen \showboxdepth\maxdimen
+  \ifx\eTeXversion\thisisundefined\else % etex gives us more logging
+    \tracingscantokens1
+    \tracingifs1
+    \tracinggroups1
+    \tracingnesting2
+    \tracingassigns1
+  \fi
+  \tracingcommands3  % 3 gives us more in etex
+  \errorcontextlines16
+}%
+
+% add check for \lastpenalty to plain's definitions.  If the last thing
+% we did was a \nobreak, we don't want to insert more space.
+%
+\def\smallbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\smallskipamount
+  \removelastskip\penalty-50\smallskip\fi\fi}
+\def\medbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\medskipamount
+  \removelastskip\penalty-100\medskip\fi\fi}
+\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
+  \removelastskip\penalty-200\bigskip\fi\fi}
+
+% Do @cropmarks to get crop marks.
+%
+\newif\ifcropmarks
+\let\cropmarks = \cropmarkstrue
+%
+% Dimensions to add cropmarks at corners.
+% Added by P. A. MacKay, 12 Nov. 1986
+%
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong  \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
+
+% Output a mark which sets \thischapter, \thissection and \thiscolor.
+% We dump everything together because we only have one kind of mark.
+% This works because we only use \botmark / \topmark, not \firstmark.
+%
+% A mark contains a subexpression of the \ifcase ... \fi construct.
+% \get*marks macros below extract the needed part using \ifcase.
+%
+% Another complication is to let the user choose whether \thischapter
+% (\thissection) refers to the chapter (section) in effect at the top
+% of a page, or that at the bottom of a page.  The solution is
+% described on page 260 of The TeXbook.  It involves outputting two
+% marks for the sectioning macros, one before the section break, and
+% one after.  I won't pretend I can describe this better than DEK...
+\def\domark{%
+  \toks0=\expandafter{\lastchapterdefs}%
+  \toks2=\expandafter{\lastsectiondefs}%
+  \toks4=\expandafter{\prevchapterdefs}%
+  \toks6=\expandafter{\prevsectiondefs}%
+  \toks8=\expandafter{\lastcolordefs}%
+  \mark{%
+                   \the\toks0 \the\toks2
+      \noexpand\or \the\toks4 \the\toks6
+    \noexpand\else \the\toks8
+  }%
+}
+% \topmark doesn't work for the very first chapter (after the title
+% page or the contents), so we use \firstmark there -- this gets us
+% the mark with the chapter defs, unless the user sneaks in, e.g.,
+% @setcolor (or @url, or @link, etc.) between @contents and the very
+% first @chapter.
+\def\gettopheadingmarks{%
+  \ifcase0\topmark\fi
+  \ifx\thischapter\empty \ifcase0\firstmark\fi \fi
+}
+\def\getbottomheadingmarks{\ifcase1\botmark\fi}
+\def\getcolormarks{\ifcase2\topmark\fi}
+
+% Avoid "undefined control sequence" errors.
+\def\lastchapterdefs{}
+\def\lastsectiondefs{}
+\def\prevchapterdefs{}
+\def\prevsectiondefs{}
+\def\lastcolordefs{}
+
+% Main output routine.
+\chardef\PAGE = 255
+\output = {\onepageout{\pagecontents\PAGE}}
+
+\newbox\headlinebox
+\newbox\footlinebox
+
+% \onepageout takes a vbox as an argument.  Note that \pagecontents
+% does insertions, but you have to call it yourself.
+\def\onepageout#1{%
+  \ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
+  %
+  \ifodd\pageno  \advance\hoffset by \bindingoffset
+  \else \advance\hoffset by -\bindingoffset\fi
+  %
+  % Do this outside of the \shipout so @code etc. will be expanded in
+  % the headline as they should be, not taken literally (outputting ''code).
+  \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
+  \setbox\headlinebox = \vbox{\let\hsize=\pagewidth \makeheadline}%
+  \ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
+  \setbox\footlinebox = \vbox{\let\hsize=\pagewidth \makefootline}%
+  %
+  {%
+    % Have to do this stuff outside the \shipout because we want it to
+    % take effect in \write's, yet the group defined by the \vbox ends
+    % before the \shipout runs.
+    %
+    \indexdummies         % don't expand commands in the output.
+    \normalturnoffactive  % \ in index entries must not stay \, e.g., if
+               % the page break happens to be in the middle of an example.
+               % We don't want .vr (or whatever) entries like this:
+               % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+               % "\acronym" won't work when it's read back in;
+               % it needs to be
+               % {\code {{\tt \backslashcurfont }acronym}
+    \shipout\vbox{%
+      % Do this early so pdf references go to the beginning of the page.
+      \ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
+      %
+      \ifcropmarks \vbox to \outervsize\bgroup
+        \hsize = \outerhsize
+        \vskip-\topandbottommargin
+        \vtop to0pt{%
+          \line{\ewtop\hfil\ewtop}%
+          \nointerlineskip
+          \line{%
+            \vbox{\moveleft\cornerthick\nstop}%
+            \hfill
+            \vbox{\moveright\cornerthick\nstop}%
+          }%
+          \vss}%
+        \vskip\topandbottommargin
+        \line\bgroup
+          \hfil % center the page within the outer (page) hsize.
+          \ifodd\pageno\hskip\bindingoffset\fi
+          \vbox\bgroup
+      \fi
+      %
+      \unvbox\headlinebox
+      \pagebody{#1}%
+      \ifdim\ht\footlinebox > 0pt
+        % Only leave this space if the footline is nonempty.
+        % (We lessened \vsize for it in \oddfootingyyy.)
+        % The \baselineskip=24pt in plain's \makefootline has no effect.
+        \vskip 24pt
+        \unvbox\footlinebox
+      \fi
+      %
+      \ifcropmarks
+          \egroup % end of \vbox\bgroup
+        \hfil\egroup % end of (centering) \line\bgroup
+        \vskip\topandbottommargin plus1fill minus1fill
+        \boxmaxdepth = \cornerthick
+        \vbox to0pt{\vss
+          \line{%
+            \vbox{\moveleft\cornerthick\nsbot}%
+            \hfill
+            \vbox{\moveright\cornerthick\nsbot}%
+          }%
+          \nointerlineskip
+          \line{\ewbot\hfil\ewbot}%
+        }%
+      \egroup % \vbox from first cropmarks clause
+      \fi
+    }% end of \shipout\vbox
+  }% end of group with \indexdummies
+  \advancepageno
+  \ifnum\outputpenalty>-20000 \else\dosupereject\fi
+}
+
+\newinsert\margin \dimen\margin=\maxdimen
+
+\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
+{\catcode`\@ =11
+\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
+% marginal hacks, juha@viisa.uucp (Juha Takala)
+\ifvoid\margin\else % marginal info is present
+  \rlap{\kern\hsize\vbox to\z@{\kern1pt\box\margin \vss}}\fi
+\dimen@=\dp#1\relax \unvbox#1\relax
+\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi
+\ifr@ggedbottom \kern-\dimen@ \vfil \fi}
+}
+
+% Here are the rules for the cropmarks.  Note that they are
+% offset so that the space between them is truly \outerhsize or \outervsize
+% (P. A. MacKay, 12 November, 1986)
+%
+\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong}
+\def\nstop{\vbox
+  {\hrule height\cornerthick depth\cornerlong width\cornerthick}}
+\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong}
+\def\nsbot{\vbox
+  {\hrule height\cornerlong depth\cornerthick width\cornerthick}}
+
+% Parse an argument, then pass it to #1.  The argument is the rest of
+% the input line (except we remove a trailing comment).  #1 should be a
+% macro which expects an ordinary undelimited TeX argument.
+%
+\def\parsearg{\parseargusing{}}
+\def\parseargusing#1#2{%
+  \def\argtorun{#2}%
+  \begingroup
+    \obeylines
+    \spaceisspace
+    #1%
+    \parseargline\empty% Insert the \empty token, see \finishparsearg below.
+}
+
+{\obeylines %
+  \gdef\parseargline#1^^M{%
+    \endgroup % End of the group started in \parsearg.
+    \argremovecomment #1\comment\ArgTerm%
+  }%
+}
+
+% First remove any @comment, then any @c comment.
+\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+
+% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
+%
+% \argremovec might leave us with trailing space, e.g.,
+%    @end itemize  @c foo
+% This space token undergoes the same procedure and is eventually removed
+% by \finishparsearg.
+%
+\def\argcheckspaces#1\^^M{\argcheckspacesX#1\^^M \^^M}
+\def\argcheckspacesX#1 \^^M{\argcheckspacesY#1\^^M}
+\def\argcheckspacesY#1\^^M#2\^^M#3\ArgTerm{%
+  \def\temp{#3}%
+  \ifx\temp\empty
+    % Do not use \next, perhaps the caller of \parsearg uses it; reuse \temp:
+    \let\temp\finishparsearg
+  \else
+    \let\temp\argcheckspaces
+  \fi
+  % Put the space token in:
+  \temp#1 #3\ArgTerm
+}
+
+% If a _delimited_ argument is enclosed in braces, they get stripped; so
+% to get _exactly_ the rest of the line, we had to prevent such situation.
+% We prepended an \empty token at the very beginning and we expand it now,
+% just before passing the control to \argtorun.
+% (Similarly, we have to think about #3 of \argcheckspacesY above: it is
+% either the null string, or it ends with \^^M---thus there is no danger
+% that a pair of braces would be stripped.
+%
+% But first, we have to remove the trailing space token.
+%
+\def\finishparsearg#1 \ArgTerm{\expandafter\argtorun\expandafter{#1}}
+
+% \parseargdef\foo{...}
+%	is roughly equivalent to
+% \def\foo{\parsearg\Xfoo}
+% \def\Xfoo#1{...}
+%
+% Actually, I use \csname\string\foo\endcsname, ie. \\foo, as it is my
+% favourite TeX trick.  --kasal, 16nov03
+
+\def\parseargdef#1{%
+  \expandafter \doparseargdef \csname\string#1\endcsname #1%
+}
+\def\doparseargdef#1#2{%
+  \def#2{\parsearg#1}%
+  \def#1##1%
+}
+
+% Several utility definitions with active space:
+{
+  \obeyspaces
+  \gdef\obeyedspace{ }
+
+  % Make each space character in the input produce a normal interword
+  % space in the output.  Don't allow a line break at this space, as this
+  % is used only in environments like @example, where each line of input
+  % should produce a line of output anyway.
+  %
+  \gdef\sepspaces{\obeyspaces\let =\tie}
+
+  % If an index command is used in an @example environment, any spaces
+  % therein should become regular spaces in the raw index file, not the
+  % expansion of \tie (\leavevmode \penalty \@M \ ).
+  \gdef\unsepspaces{\let =\space}
+}
+
+
+\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next}
+
+% Define the framework for environments in texinfo.tex.  It's used like this:
+%
+%   \envdef\foo{...}
+%   \def\Efoo{...}
+%
+% It's the responsibility of \envdef to insert \begingroup before the
+% actual body; @end closes the group after calling \Efoo.  \envdef also
+% defines \thisenv, so the current environment is known; @end checks
+% whether the environment name matches.  The \checkenv macro can also be
+% used to check whether the current environment is the one expected.
+%
+% Non-false conditionals (@iftex, @ifset) don't fit into this, so they
+% are not treated as environments; they don't open a group.  (The
+% implementation of @end takes care not to call \endgroup in this
+% special case.)
+
+
+% At run-time, environments start with this:
+\def\startenvironment#1{\begingroup\def\thisenv{#1}}
+% initialize
+\let\thisenv\empty
+
+% ... but they get defined via ``\envdef\foo{...}'':
+\long\def\envdef#1#2{\def#1{\startenvironment#1#2}}
+\def\envparseargdef#1#2{\parseargdef#1{\startenvironment#1#2}}
+
+% Check whether we're in the right environment:
+\def\checkenv#1{%
+  \def\temp{#1}%
+  \ifx\thisenv\temp
+  \else
+    \badenverr
+  \fi
+}
+
+% Environment mismatch, #1 expected:
+\def\badenverr{%
+  \errhelp = \EMsimple
+  \errmessage{This command can appear only \inenvironment\temp,
+    not \inenvironment\thisenv}%
+}
+\def\inenvironment#1{%
+  \ifx#1\empty
+    outside of any environment%
+  \else
+    in environment \expandafter\string#1%
+  \fi
+}
+
+% @end foo executes the definition of \Efoo.
+% But first, it executes a specialized version of \checkenv
+%
+\parseargdef\end{%
+  \if 1\csname iscond.#1\endcsname
+  \else
+    % The general wording of \badenverr may not be ideal.
+    \expandafter\checkenv\csname#1\endcsname
+    \csname E#1\endcsname
+    \endgroup
+  \fi
+}
+
+\newhelp\EMsimple{Press RETURN to continue.}
+
+
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+
+% @: forces normal size whitespace following.
+\def\:{\spacefactor=1000 }
+
+% @* forces a line break.
+\def\*{\hfil\break\hbox{}\ignorespaces}
+
+% @/ allows a line break.
+\let\/=\allowbreak
+
+% @. is an end-of-sentence period.
+\def\.{.\spacefactor=\endofsentencespacefactor\space}
+
+% @! is an end-of-sentence bang.
+\def\!{!\spacefactor=\endofsentencespacefactor\space}
+
+% @? is an end-of-sentence query.
+\def\?{?\spacefactor=\endofsentencespacefactor\space}
+
+% @frenchspacing on|off  says whether to put extra space after punctuation.
+%
+\def\onword{on}
+\def\offword{off}
+%
+\parseargdef\frenchspacing{%
+  \def\temp{#1}%
+  \ifx\temp\onword \plainfrenchspacing
+  \else\ifx\temp\offword \plainnonfrenchspacing
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @frenchspacing option `\temp', must be on|off}%
+  \fi\fi
+}
+
+% @w prevents a word break.  Without the \leavevmode, @w at the
+% beginning of a paragraph, when TeX is still in vertical mode, would
+% produce a whole line of output instead of starting the paragraph.
+\def\w#1{\leavevmode\hbox{#1}}
+
+% @group ... @end group forces ... to be all on one page, by enclosing
+% it in a TeX vbox.  We use \vtop instead of \vbox to construct the box
+% to keep its height that of a normal line.  According to the rules for
+% \topskip (p.114 of the TeXbook), the glue inserted is
+% max (\topskip - \ht (first item), 0).  If that height is large,
+% therefore, no glue is inserted, and the space between the headline and
+% the text is small, which looks bad.
+%
+% Another complication is that the group might be very large.  This can
+% cause the glue on the previous page to be unduly stretched, because it
+% does not have much material.  In this case, it's better to add an
+% explicit \vfill so that the extra space is at the bottom.  The
+% threshold for doing this is if the group is more than \vfilllimit
+% percent of a page (\vfilllimit can be changed inside of @tex).
+%
+\newbox\groupbox
+\def\vfilllimit{0.7}
+%
+\envdef\group{%
+  \ifnum\catcode`\^^M=\active \else
+    \errhelp = \groupinvalidhelp
+    \errmessage{@group invalid in context where filling is enabled}%
+  \fi
+  \startsavinginserts
+  %
+  \setbox\groupbox = \vtop\bgroup
+    % Do @comment since we are called inside an environment such as
+    % @example, where each end-of-line in the input causes an
+    % end-of-line in the output.  We don't want the end-of-line after
+    % the `@group' to put extra space in the output.  Since @group
+    % should appear on a line by itself (according to the Texinfo
+    % manual), we don't worry about eating any user text.
+    \comment
+}
+%
+% The \vtop produces a box with normal height and large depth; thus, TeX puts
+% \baselineskip glue before it, and (when the next line of text is done)
+% \lineskip glue after it.  Thus, space below is not quite equal to space
+% above.  But it's pretty close.
+\def\Egroup{%
+    % To get correct interline space between the last line of the group
+    % and the first line afterwards, we have to propagate \prevdepth.
+    \endgraf % Not \par, as it may have been set to \lisppar.
+    \global\dimen1 = \prevdepth
+  \egroup           % End the \vtop.
+  % \dimen0 is the vertical size of the group's box.
+  \dimen0 = \ht\groupbox  \advance\dimen0 by \dp\groupbox
+  % \dimen2 is how much space is left on the page (more or less).
+  \dimen2 = \pageheight   \advance\dimen2 by -\pagetotal
+  % if the group doesn't fit on the current page, and it's a big big
+  % group, force a page break.
+  \ifdim \dimen0 > \dimen2
+    \ifdim \pagetotal < \vfilllimit\pageheight
+      \page
+    \fi
+  \fi
+  \box\groupbox
+  \prevdepth = \dimen1
+  \checkinserts
+}
+%
+% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
+% message, so this ends up printing `@group can only ...'.
+%
+\newhelp\groupinvalidhelp{%
+group can only be used in environments such as @example,^^J%
+where each line of input produces a line of output.}
+
+% @need space-in-mils
+% forces a page break if there is not space-in-mils remaining.
+
+\newdimen\mil  \mil=0.001in
+
+\parseargdef\need{%
+  % Ensure vertical mode, so we don't make a big box in the middle of a
+  % paragraph.
+  \par
+  %
+  % If the @need value is less than one line space, it's useless.
+  \dimen0 = #1\mil
+  \dimen2 = \ht\strutbox
+  \advance\dimen2 by \dp\strutbox
+  \ifdim\dimen0 > \dimen2
+    %
+    % Do a \strut just to make the height of this box be normal, so the
+    % normal leading is inserted relative to the preceding line.
+    % And a page break here is fine.
+    \vtop to #1\mil{\strut\vfil}%
+    %
+    % TeX does not even consider page breaks if a penalty added to the
+    % main vertical list is 10000 or more.  But in order to see if the
+    % empty box we just added fits on the page, we must make it consider
+    % page breaks.  On the other hand, we don't want to actually break the
+    % page after the empty box.  So we use a penalty of 9999.
+    %
+    % There is an extremely small chance that TeX will actually break the
+    % page at this \penalty, if there are no other feasible breakpoints in
+    % sight.  (If the user is using lots of big @group commands, which
+    % almost-but-not-quite fill up a page, TeX will have a hard time doing
+    % good page breaking, for example.)  However, I could not construct an
+    % example where a page broke at this \penalty; if it happens in a real
+    % document, then we can reconsider our strategy.
+    \penalty9999
+    %
+    % Back up by the size of the box, whether we did a page break or not.
+    \kern -#1\mil
+    %
+    % Do not allow a page break right after this kern.
+    \nobreak
+  \fi
+}
+
+% @br   forces paragraph break (and is undocumented).
+
+\let\br = \par
+
+% @page forces the start of a new page.
+%
+\def\page{\par\vfill\supereject}
+
+% @exdent text....
+% outputs text on separate line in roman font, starting at standard page margin
+
+% This records the amount of indent in the innermost environment.
+% That's how much \exdent should take out.
+\newskip\exdentamount
+
+% This defn is used inside fill environments such as @defun.
+\parseargdef\exdent{\hfil\break\hbox{\kern -\exdentamount{\rm#1}}\hfil\break}
+
+% This defn is used inside nofill environments such as @example.
+\parseargdef\nofillexdent{{\advance \leftskip by -\exdentamount
+  \leftline{\hskip\leftskip{\rm#1}}}}
+
+% @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current
+% paragraph.  For more general purposes, use the \margin insertion
+% class.  WHICH is `l' or `r'.  Not documented, written for gawk manual.
+%
+\newskip\inmarginspacing \inmarginspacing=1cm
+\def\strutdepth{\dp\strutbox}
+%
+\def\doinmargin#1#2{\strut\vadjust{%
+  \nobreak
+  \kern-\strutdepth
+  \vtop to \strutdepth{%
+    \baselineskip=\strutdepth
+    \vss
+    % if you have multiple lines of stuff to put here, you'll need to
+    % make the vbox yourself of the appropriate size.
+    \ifx#1l%
+      \llap{\ignorespaces #2\hskip\inmarginspacing}%
+    \else
+      \rlap{\hskip\hsize \hskip\inmarginspacing \ignorespaces #2}%
+    \fi
+    \null
+  }%
+}}
+\def\inleftmargin{\doinmargin l}
+\def\inrightmargin{\doinmargin r}
+%
+% @inmargin{TEXT [, RIGHT-TEXT]}
+% (if RIGHT-TEXT is given, use TEXT for left page, RIGHT-TEXT for right;
+% else use TEXT for both).
+%
+\def\inmargin#1{\parseinmargin #1,,\finish}
+\def\parseinmargin#1,#2,#3\finish{% not perfect, but better than nothing.
+  \setbox0 = \hbox{\ignorespaces #2}%
+  \ifdim\wd0 > 0pt
+    \def\lefttext{#1}%  have both texts
+    \def\righttext{#2}%
+  \else
+    \def\lefttext{#1}%  have only one text
+    \def\righttext{#1}%
+  \fi
+  %
+  \ifodd\pageno
+    \def\temp{\inrightmargin\righttext}% odd page -> outside is right margin
+  \else
+    \def\temp{\inleftmargin\lefttext}%
+  \fi
+  \temp
+}
+
+% @| inserts a changebar to the left of the current line.  It should
+% surround any changed text.  This approach does *not* work if the
+% change spans more than two lines of output.  To handle that, we would
+% have adopt a much more difficult approach (putting marks into the main
+% vertical list for the beginning and end of each change).  This command
+% is not documented, not supported, and doesn't work.
+%
+\def\|{%
+  % \vadjust can only be used in horizontal mode.
+  \leavevmode
+  %
+  % Append this vertical mode material after the current line in the output.
+  \vadjust{%
+    % We want to insert a rule with the height and depth of the current
+    % leading; that is exactly what \strutbox is supposed to record.
+    \vskip-\baselineskip
+    %
+    % \vadjust-items are inserted at the left edge of the type.  So
+    % the \llap here moves out into the left-hand margin.
+    \llap{%
+      %
+      % For a thicker or thinner bar, change the `1pt'.
+      \vrule height\baselineskip width1pt
+      %
+      % This is the space between the bar and the text.
+      \hskip 12pt
+    }%
+  }%
+}
+
+% @include FILE -- \input text of FILE.
+%
+\def\include{\parseargusing\filenamecatcodes\includezzz}
+\def\includezzz#1{%
+  \pushthisfilestack
+  \def\thisfile{#1}%
+  {%
+    \makevalueexpandable  % we want to expand any @value in FILE.
+    \turnoffactive        % and allow special characters in the expansion
+    \indexnofonts         % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @include of #1^^J}%
+    \edef\temp{\noexpand\input #1 }%
+    %
+    % This trickery is to read FILE outside of a group, in case it makes
+    % definitions, etc.
+    \expandafter
+  }\temp
+  \popthisfilestack
+}
+\def\filenamecatcodes{%
+  \catcode`\\=\other
+  \catcode`~=\other
+  \catcode`^=\other
+  \catcode`_=\other
+  \catcode`|=\other
+  \catcode`<=\other
+  \catcode`>=\other
+  \catcode`+=\other
+  \catcode`-=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
+}
+
+\def\pushthisfilestack{%
+  \expandafter\pushthisfilestackX\popthisfilestack\StackTerm
+}
+\def\pushthisfilestackX{%
+  \expandafter\pushthisfilestackY\thisfile\StackTerm
+}
+\def\pushthisfilestackY #1\StackTerm #2\StackTerm {%
+  \gdef\popthisfilestack{\gdef\thisfile{#1}\gdef\popthisfilestack{#2}}%
+}
+
+\def\popthisfilestack{\errthisfilestackempty}
+\def\errthisfilestackempty{\errmessage{Internal error:
+  the stack of filenames is empty.}}
+
+\def\thisfile{}
+
+% @center line
+% outputs that line, centered.
+%
+\parseargdef\center{%
+  \ifhmode
+    \let\next\centerH
+  \else
+    \let\next\centerV
+  \fi
+  \next{\hfil \ignorespaces#1\unskip \hfil}%
+}
+\def\centerH#1{%
+  {%
+    \hfil\break
+    \advance\hsize by -\leftskip
+    \advance\hsize by -\rightskip
+    \line{#1}%
+    \break
+  }%
+}
+\def\centerV#1{\line{\kern\leftskip #1\kern\rightskip}}
+
+% @sp n   outputs n lines of vertical space
+
+\parseargdef\sp{\vskip #1\baselineskip}
+
+% @comment ...line which is ignored...
+% @c is the same as @comment
+% @ignore ... @end ignore  is another way to write a comment
+
+\def\comment{\begingroup \catcode`\^^M=\other%
+\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
+\commentxxx}
+{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
+
+\let\c=\comment
+
+% @paragraphindent NCHARS
+% We'll use ems for NCHARS, close enough.
+% NCHARS can also be the word `asis' or `none'.
+% We cannot feasibly implement @paragraphindent asis, though.
+%
+\def\asisword{asis} % no translation, these are keywords
+\def\noneword{none}
+%
+\parseargdef\paragraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \defaultparindent = 0pt
+    \else
+      \defaultparindent = #1em
+    \fi
+  \fi
+  \parindent = \defaultparindent
+}
+
+% @exampleindent NCHARS
+% We'll use ems for NCHARS like @paragraphindent.
+% It seems @exampleindent asis isn't necessary, but
+% I preserve it to make it similar to @paragraphindent.
+\parseargdef\exampleindent{%
+  \def\temp{#1}%
+  \ifx\temp\asisword
+  \else
+    \ifx\temp\noneword
+      \lispnarrowing = 0pt
+    \else
+      \lispnarrowing = #1em
+    \fi
+  \fi
+}
+
+% @firstparagraphindent WORD
+% If WORD is `none', then suppress indentation of the first paragraph
+% after a section heading.  If WORD is `insert', then do indent at such
+% paragraphs.
+%
+% The paragraph indentation is suppressed or not by calling
+% \suppressfirstparagraphindent, which the sectioning commands do.
+% We switch the definition of this back and forth according to WORD.
+% By default, we suppress indentation.
+%
+\def\suppressfirstparagraphindent{\dosuppressfirstparagraphindent}
+\def\insertword{insert}
+%
+\parseargdef\firstparagraphindent{%
+  \def\temp{#1}%
+  \ifx\temp\noneword
+    \let\suppressfirstparagraphindent = \dosuppressfirstparagraphindent
+  \else\ifx\temp\insertword
+    \let\suppressfirstparagraphindent = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @firstparagraphindent option `\temp'}%
+  \fi\fi
+}
+
+% Here is how we actually suppress indentation.  Redefine \everypar to
+% \kern backwards by \parindent, and then reset itself to empty.
+%
+% We also make \indent itself not actually do anything until the next
+% paragraph.
+%
+\gdef\dosuppressfirstparagraphindent{%
+  \gdef\indent{%
+    \restorefirstparagraphindent
+    \indent
+  }%
+  \gdef\noindent{%
+    \restorefirstparagraphindent
+    \noindent
+  }%
+  \global\everypar = {%
+    \kern -\parindent
+    \restorefirstparagraphindent
+  }%
+}
+
+\gdef\restorefirstparagraphindent{%
+  \global \let \indent = \ptexindent
+  \global \let \noindent = \ptexnoindent
+  \global \everypar = {}%
+}
+
+
+% @refill is a no-op.
+\let\refill=\relax
+
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% @setfilename is done at the beginning of every texinfo file.
+% So open here the files we need to have open while reading the input.
+% This makes it possible to make a .fmt file for texinfo.
+\def\setfilename{%
+   \fixbackslash  % Turn off hack to swallow `\input texinfo'.
+   \iflinks
+     \tryauxfile
+     % Open the new aux file.  TeX will close it automatically at exit.
+     \immediate\openout\auxfile=\jobname.aux
+   \fi % \openindices needs to do some work in any case.
+   \openindices
+   \let\setfilename=\comment % Ignore extra @setfilename cmds.
+   %
+   % If texinfo.cnf is present on the system, read it.
+   % Useful for site-wide @afourpaper, etc.
+   \openin 1 texinfo.cnf
+   \ifeof 1 \else \input texinfo.cnf \fi
+   \closein 1
+   %
+   \comment % Ignore the actual filename.
+}
+
+% Called from \setfilename.
+%
+\def\openindices{%
+  \newindex{cp}%
+  \newcodeindex{fn}%
+  \newcodeindex{vr}%
+  \newcodeindex{tp}%
+  \newcodeindex{ky}%
+  \newcodeindex{pg}%
+}
+
+% @bye.
+\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
+
+
+\message{pdf,}
+% adobe `portable' document format
+\newcount\tempnum
+\newcount\lnkcount
+\newtoks\filename
+\newcount\filenamelength
+\newcount\pgn
+\newtoks\toksA
+\newtoks\toksB
+\newtoks\toksC
+\newtoks\toksD
+\newbox\boxA
+\newcount\countA
+\newif\ifpdf
+\newif\ifpdfmakepagedest
+
+% when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1
+% can be set).  So we test for \relax and 0 as well as being undefined.
+\ifx\pdfoutput\thisisundefined
+\else
+  \ifx\pdfoutput\relax
+  \else
+    \ifcase\pdfoutput
+    \else
+      \pdftrue
+    \fi
+  \fi
+\fi
+
+% PDF uses PostScript string constants for the names of xref targets,
+% for display in the outlines, and in other places.  Thus, we have to
+% double any backslashes.  Otherwise, a name like "\node" will be
+% interpreted as a newline (\n), followed by o, d, e.  Not good.
+% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html
+% (and related messages, the final outcome is that it is up to the TeX
+% user to double the backslashes and otherwise make the string valid, so
+% that's what we do).
+
+% double active backslashes.
+%
+{\catcode`\@=0 \catcode`\\=\active
+ @gdef@activebackslashdouble{%
+   @catcode`@\=@active
+   @let\=@doublebackslash}
+}
+
+% To handle parens, we must adopt a different approach, since parens are
+% not active characters.  hyperref.dtx (which has the same problem as
+% us) handles it with this amazing macro to replace tokens, with minor
+% changes for Texinfo.  It is included here under the GPL by permission
+% from the author, Heiko Oberdiek.
+%
+% #1 is the tokens to replace.
+% #2 is the replacement.
+% #3 is the control sequence with the string.
+%
+\def\HyPsdSubst#1#2#3{%
+  \def\HyPsdReplace##1#1##2\END{%
+    ##1%
+    \ifx\\##2\\%
+    \else
+      #2%
+      \HyReturnAfterFi{%
+        \HyPsdReplace##2\END
+      }%
+    \fi
+  }%
+  \xdef#3{\expandafter\HyPsdReplace#3#1\END}%
+}
+\long\def\HyReturnAfterFi#1\fi{\fi#1}
+
+% #1 is a control sequence in which to do the replacements.
+\def\backslashparens#1{%
+  \xdef#1{#1}% redefine it as its expansion; the definition is simply
+             % \lastnode when called from \setref -> \pdfmkdest.
+  \HyPsdSubst{(}{\realbackslash(}{#1}%
+  \HyPsdSubst{)}{\realbackslash)}{#1}%
+}
+
+\newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images
+with PDF output, and none of those formats could be found.  (.eps cannot
+be supported due to the design of the PDF format; use regular TeX (DVI
+output) for that.)}
+
+\ifpdf
+  %
+  % Color manipulation macros based on pdfcolor.tex,
+  % except using rgb instead of cmyk; the latter is said to render as a
+  % very dark gray on-screen and a very dark halftone in print, instead
+  % of actual black.
+  \def\rgbDarkRed{0.50 0.09 0.12}
+  \def\rgbBlack{0 0 0}
+  %
+  % k sets the color for filling (usual text, etc.);
+  % K sets the color for stroking (thin rules, e.g., normal _'s).
+  \def\pdfsetcolor#1{\pdfliteral{#1 rg  #1 RG}}
+  %
+  % Set color, and create a mark which defines \thiscolor accordingly,
+  % so that \makeheadline knows which color to restore.
+  \def\setcolor#1{%
+    \xdef\lastcolordefs{\gdef\noexpand\thiscolor{#1}}%
+    \domark
+    \pdfsetcolor{#1}%
+  }
+  %
+  \def\maincolor{\rgbBlack}
+  \pdfsetcolor{\maincolor}
+  \edef\thiscolor{\maincolor}
+  \def\lastcolordefs{}
+  %
+  \def\makefootline{%
+    \baselineskip24pt
+    \line{\pdfsetcolor{\maincolor}\the\footline}%
+  }
+  %
+  \def\makeheadline{%
+    \vbox to 0pt{%
+      \vskip-22.5pt
+      \line{%
+        \vbox to8.5pt{}%
+        % Extract \thiscolor definition from the marks.
+        \getcolormarks
+        % Typeset the headline with \maincolor, then restore the color.
+        \pdfsetcolor{\maincolor}\the\headline\pdfsetcolor{\thiscolor}%
+      }%
+      \vss
+    }%
+    \nointerlineskip
+  }
+  %
+  %
+  \pdfcatalog{/PageMode /UseOutlines}
+  %
+  % #1 is image name, #2 width (might be empty/whitespace), #3 height (ditto).
+  \def\dopdfimage#1#2#3{%
+    \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}%
+    \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}%
+    %
+    % pdftex (and the PDF format) support .png, .jpg, .pdf (among
+    % others).  Let's try in that order.
+    \let\pdfimgext=\empty
+    \begingroup
+      \openin 1 #1.png \ifeof 1
+        \openin 1 #1.jpg \ifeof 1
+          \openin 1 #1.jpeg \ifeof 1
+            \openin 1 #1.JPG \ifeof 1
+              \openin 1 #1.pdf \ifeof 1
+                \openin 1 #1.PDF \ifeof 1
+                  \errhelp = \nopdfimagehelp
+                  \errmessage{Could not find image file #1 for pdf}%
+                \else \gdef\pdfimgext{PDF}%
+                \fi
+              \else \gdef\pdfimgext{pdf}%
+              \fi
+            \else \gdef\pdfimgext{JPG}%
+            \fi
+          \else \gdef\pdfimgext{jpeg}%
+          \fi
+        \else \gdef\pdfimgext{jpg}%
+        \fi
+      \else \gdef\pdfimgext{png}%
+      \fi
+      \closein 1
+    \endgroup
+    %
+    % without \immediate, ancient pdftex seg faults when the same image is
+    % included twice.  (Version 3.14159-pre-1.0-unofficial-20010704.)
+    \ifnum\pdftexversion < 14
+      \immediate\pdfimage
+    \else
+      \immediate\pdfximage
+    \fi
+      \ifdim \wd0 >0pt width \imagewidth \fi
+      \ifdim \wd2 >0pt height \imageheight \fi
+      \ifnum\pdftexversion<13
+         #1.\pdfimgext
+       \else
+         {#1.\pdfimgext}%
+       \fi
+    \ifnum\pdftexversion < 14 \else
+      \pdfrefximage \pdflastximage
+    \fi}
+  %
+  \def\pdfmkdest#1{{%
+    % We have to set dummies so commands such as @code, and characters
+    % such as \, aren't expanded when present in a section title.
+    \indexnofonts
+    \turnoffactive
+    \activebackslashdouble
+    \makevalueexpandable
+    \def\pdfdestname{#1}%
+    \backslashparens\pdfdestname
+    \safewhatsit{\pdfdest name{\pdfdestname} xyz}%
+  }}
+  %
+  % used to mark target names; must be expandable.
+  \def\pdfmkpgn#1{#1}
+  %
+  % by default, use a color that is dark enough to print on paper as
+  % nearly black, but still distinguishable for online viewing.
+  \def\urlcolor{\rgbDarkRed}
+  \def\linkcolor{\rgbDarkRed}
+  \def\endlink{\setcolor{\maincolor}\pdfendlink}
+  %
+  % Adding outlines to PDF; macros for calculating structure of outlines
+  % come from Petr Olsak
+  \def\expnumber#1{\expandafter\ifx\csname#1\endcsname\relax 0%
+    \else \csname#1\endcsname \fi}
+  \def\advancenumber#1{\tempnum=\expnumber{#1}\relax
+    \advance\tempnum by 1
+    \expandafter\xdef\csname#1\endcsname{\the\tempnum}}
+  %
+  % #1 is the section text, which is what will be displayed in the
+  % outline by the pdf viewer.  #2 is the pdf expression for the number
+  % of subentries (or empty, for subsubsections).  #3 is the node text,
+  % which might be empty if this toc entry had no corresponding node.
+  % #4 is the page number
+  %
+  \def\dopdfoutline#1#2#3#4{%
+    % Generate a link to the node text if that exists; else, use the
+    % page number.  We could generate a destination for the section
+    % text in the case where a section has no node, but it doesn't
+    % seem worth the trouble, since most documents are normally structured.
+    \def\pdfoutlinedest{#3}%
+    \ifx\pdfoutlinedest\empty
+      \def\pdfoutlinedest{#4}%
+    \else
+      % Doubled backslashes in the name.
+      {\activebackslashdouble \xdef\pdfoutlinedest{#3}%
+       \backslashparens\pdfoutlinedest}%
+    \fi
+    %
+    % Also double the backslashes in the display string.
+    {\activebackslashdouble \xdef\pdfoutlinetext{#1}%
+     \backslashparens\pdfoutlinetext}%
+    %
+    \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}%
+  }
+  %
+  \def\pdfmakeoutlines{%
+    \begingroup
+      % Thanh's hack / proper braces in bookmarks
+      \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace
+      \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace
+      %
+      % Read toc silently, to get counts of subentries for \pdfoutline.
+      \def\partentry##1##2##3##4{}% ignore parts in the outlines
+      \def\numchapentry##1##2##3##4{%
+	\def\thischapnum{##2}%
+	\def\thissecnum{0}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsecentry##1##2##3##4{%
+	\advancenumber{chap\thischapnum}%
+	\def\thissecnum{##2}%
+	\def\thissubsecnum{0}%
+      }%
+      \def\numsubsecentry##1##2##3##4{%
+	\advancenumber{sec\thissecnum}%
+	\def\thissubsecnum{##2}%
+      }%
+      \def\numsubsubsecentry##1##2##3##4{%
+	\advancenumber{subsec\thissubsecnum}%
+      }%
+      \def\thischapnum{0}%
+      \def\thissecnum{0}%
+      \def\thissubsecnum{0}%
+      %
+      % use \def rather than \let here because we redefine \chapentry et
+      % al. a second time, below.
+      \def\appentry{\numchapentry}%
+      \def\appsecentry{\numsecentry}%
+      \def\appsubsecentry{\numsubsecentry}%
+      \def\appsubsubsecentry{\numsubsubsecentry}%
+      \def\unnchapentry{\numchapentry}%
+      \def\unnsecentry{\numsecentry}%
+      \def\unnsubsecentry{\numsubsecentry}%
+      \def\unnsubsubsecentry{\numsubsubsecentry}%
+      \readdatafile{toc}%
+      %
+      % Read toc second time, this time actually producing the outlines.
+      % The `-' means take the \expnumber as the absolute number of
+      % subentries, which we calculated on our first read of the .toc above.
+      %
+      % We use the node names as the destinations.
+      \def\numchapentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{chap##2}}{##3}{##4}}%
+      \def\numsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{sec##2}}{##3}{##4}}%
+      \def\numsubsecentry##1##2##3##4{%
+        \dopdfoutline{##1}{count-\expnumber{subsec##2}}{##3}{##4}}%
+      \def\numsubsubsecentry##1##2##3##4{% count is always zero
+        \dopdfoutline{##1}{}{##3}{##4}}%
+      %
+      % PDF outlines are displayed using system fonts, instead of
+      % document fonts.  Therefore we cannot use special characters,
+      % since the encoding is unknown.  For example, the eogonek from
+      % Latin 2 (0xea) gets translated to a | character.  Info from
+      % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100.
+      %
+      % xx to do this right, we have to translate 8-bit characters to
+      % their "best" equivalent, based on the @documentencoding.  Right
+      % now, I guess we'll just let the pdf reader have its way.
+      \indexnofonts
+      \setupdatafile
+      \catcode`\\=\active \otherbackslash
+      \input \tocreadfilename
+    \endgroup
+  }
+  %
+  \def\skipspaces#1{\def\PP{#1}\def\D{|}%
+    \ifx\PP\D\let\nextsp\relax
+    \else\let\nextsp\skipspaces
+      \ifx\p\space\else\addtokens{\filename}{\PP}%
+        \advance\filenamelength by 1
+      \fi
+    \fi
+    \nextsp}
+  \def\getfilename#1{\filenamelength=0\expandafter\skipspaces#1|\relax}
+  \ifnum\pdftexversion < 14
+    \let \startlink \pdfannotlink
+  \else
+    \let \startlink \pdfstartlink
+  \fi
+  % make a live url in pdf output.
+  \def\pdfurl#1{%
+    \begingroup
+      % it seems we really need yet another set of dummies; have not
+      % tried to figure out what each command should do in the context
+      % of @url.  for now, just make @/ a no-op, that's the only one
+      % people have actually reported a problem with.
+      %
+      \normalturnoffactive
+      \def\@{@}%
+      \let\/=\empty
+      \makevalueexpandable
+      % do we want to go so far as to use \indexnofonts instead of just
+      % special-casing \var here?
+      \def\var##1{##1}%
+      %
+      \leavevmode\setcolor{\urlcolor}%
+      \startlink attr{/Border [0 0 0]}%
+        user{/Subtype /Link /A << /S /URI /URI (#1) >>}%
+    \endgroup}
+  \def\pdfgettoks#1.{\setbox\boxA=\hbox{\toksA={#1.}\toksB={}\maketoks}}
+  \def\addtokens#1#2{\edef\addtoks{\noexpand#1={\the#1#2}}\addtoks}
+  \def\adn#1{\addtokens{\toksC}{#1}\global\countA=1\let\next=\maketoks}
+  \def\poptoks#1#2|ENDTOKS|{\let\first=#1\toksD={#1}\toksA={#2}}
+  \def\maketoks{%
+    \expandafter\poptoks\the\toksA|ENDTOKS|\relax
+    \ifx\first0\adn0
+    \else\ifx\first1\adn1 \else\ifx\first2\adn2 \else\ifx\first3\adn3
+    \else\ifx\first4\adn4 \else\ifx\first5\adn5 \else\ifx\first6\adn6
+    \else\ifx\first7\adn7 \else\ifx\first8\adn8 \else\ifx\first9\adn9
+    \else
+      \ifnum0=\countA\else\makelink\fi
+      \ifx\first.\let\next=\done\else
+        \let\next=\maketoks
+        \addtokens{\toksB}{\the\toksD}
+        \ifx\first,\addtokens{\toksB}{\space}\fi
+      \fi
+    \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+    \next}
+  \def\makelink{\addtokens{\toksB}%
+    {\noexpand\pdflink{\the\toksC}}\toksC={}\global\countA=0}
+  \def\pdflink#1{%
+    \startlink attr{/Border [0 0 0]} goto name{\pdfmkpgn{#1}}
+    \setcolor{\linkcolor}#1\endlink}
+  \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st}
+\else
+  % non-pdf mode
+  \let\pdfmkdest = \gobble
+  \let\pdfurl = \gobble
+  \let\endlink = \relax
+  \let\setcolor = \gobble
+  \let\pdfsetcolor = \gobble
+  \let\pdfmakeoutlines = \relax
+\fi  % \ifx\pdfoutput
+
+
+\message{fonts,}
+
+% Change the current font style to #1, remembering it in \curfontstyle.
+% For now, we do not accumulate font styles: @b{@i{foo}} prints foo in
+% italics, not bold italics.
+%
+\def\setfontstyle#1{%
+  \def\curfontstyle{#1}% not as a control sequence, because we are \edef'd.
+  \csname ten#1\endcsname  % change the current font
+}
+
+% Select #1 fonts with the current style.
+%
+\def\selectfonts#1{\csname #1fonts\endcsname \csname\curfontstyle\endcsname}
+
+\def\rm{\fam=0 \setfontstyle{rm}}
+\def\it{\fam=\itfam \setfontstyle{it}}
+\def\sl{\fam=\slfam \setfontstyle{sl}}
+\def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf}
+\def\tt{\fam=\ttfam \setfontstyle{tt}}
+
+% Unfortunately, we have to override this for titles and the like, since
+% in those cases "rm" is bold.  Sigh.
+\def\rmisbold{\rm\def\curfontstyle{bf}}
+
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
+% So we set up a \sf.
+\newfam\sffam
+\def\sf{\fam=\sffam \setfontstyle{sf}}
+\let\li = \sf % Sometimes we call it \li, not \sf.
+
+% We don't need math for this font style.
+\def\ttsl{\setfontstyle{ttsl}}
+
+
+% Default leading.
+\newdimen\textleading  \textleading = 13.2pt
+
+% Set the baselineskip to #1, and the lineskip and strut size
+% correspondingly.  There is no deep meaning behind these magic numbers
+% used as factors; they just match (closely enough) what Knuth defined.
+%
+\def\lineskipfactor{.08333}
+\def\strutheightpercent{.70833}
+\def\strutdepthpercent {.29167}
+%
+% can get a sort of poor man's double spacing by redefining this.
+\def\baselinefactor{1}
+%
+\def\setleading#1{%
+  \dimen0 = #1\relax
+  \normalbaselineskip = \baselinefactor\dimen0
+  \normallineskip = \lineskipfactor\normalbaselineskip
+  \normalbaselines
+  \setbox\strutbox =\hbox{%
+    \vrule width0pt height\strutheightpercent\baselineskip
+                    depth \strutdepthpercent \baselineskip
+  }%
+}
+
+% PDF CMaps.  See also LaTeX's t1.cmap.
+%
+% do nothing with this by default.
+\expandafter\let\csname cmapOT1\endcsname\gobble
+\expandafter\let\csname cmapOT1IT\endcsname\gobble
+\expandafter\let\csname cmapOT1TT\endcsname\gobble
+
+% if we are producing pdf, and we have \pdffontattr, then define cmaps.
+% (\pdffontattr was introduced many years ago, but people still run
+% older pdftex's; it's easy to conditionalize, so we do.)
+\ifpdf \ifx\pdffontattr\thisisundefined \else
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1-0)
+%%Title: (TeX-OT1-0 TeX OT1 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<23> <26> <0023>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+40 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1IT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1IT-0)
+%%Title: (TeX-OT1IT-0 TeX OT1IT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1IT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1IT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+8 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<25> <26> <0025>
+<28> <3B> <0028>
+<3F> <5B> <003F>
+<5D> <5E> <005D>
+<61> <7A> <0061>
+<7B> <7C> <2013>
+endbfrange
+42 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <00660066>
+<0C> <00660069>
+<0D> <0066006C>
+<0E> <006600660069>
+<0F> <00660066006C>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<21> <0021>
+<22> <201D>
+<23> <0023>
+<24> <00A3>
+<27> <2019>
+<3C> <00A1>
+<3D> <003D>
+<3E> <00BF>
+<5C> <201C>
+<5F> <02D9>
+<60> <2018>
+<7D> <02DD>
+<7E> <007E>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1IT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+%
+% \cmapOT1TT
+  \begingroup
+    \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char.
+    \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap
+%%DocumentNeededResources: ProcSet (CIDInit)
+%%IncludeResource: ProcSet (CIDInit)
+%%BeginResource: CMap (TeX-OT1TT-0)
+%%Title: (TeX-OT1TT-0 TeX OT1TT 0)
+%%Version: 1.000
+%%EndComments
+/CIDInit /ProcSet findresource begin
+12 dict begin
+begincmap
+/CIDSystemInfo
+<< /Registry (TeX)
+/Ordering (OT1TT)
+/Supplement 0
+>> def
+/CMapName /TeX-OT1TT-0 def
+/CMapType 2 def
+1 begincodespacerange
+<00> <7F>
+endcodespacerange
+5 beginbfrange
+<00> <01> <0393>
+<09> <0A> <03A8>
+<21> <26> <0021>
+<28> <5F> <0028>
+<61> <7E> <0061>
+endbfrange
+32 beginbfchar
+<02> <0398>
+<03> <039B>
+<04> <039E>
+<05> <03A0>
+<06> <03A3>
+<07> <03D2>
+<08> <03A6>
+<0B> <2191>
+<0C> <2193>
+<0D> <0027>
+<0E> <00A1>
+<0F> <00BF>
+<10> <0131>
+<11> <0237>
+<12> <0060>
+<13> <00B4>
+<14> <02C7>
+<15> <02D8>
+<16> <00AF>
+<17> <02DA>
+<18> <00B8>
+<19> <00DF>
+<1A> <00E6>
+<1B> <0153>
+<1C> <00F8>
+<1D> <00C6>
+<1E> <0152>
+<1F> <00D8>
+<20> <2423>
+<27> <2019>
+<60> <2018>
+<7F> <00A8>
+endbfchar
+endcmap
+CMapName currentdict /CMap defineresource pop
+end
+end
+%%EndResource
+%%EOF
+    }\endgroup
+  \expandafter\edef\csname cmapOT1TT\endcsname#1{%
+    \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}%
+  }%
+\fi\fi
+
+
+% Set the font macro #1 to the font named #2, adding on the
+% specified font prefix (normally `cm').
+% #3 is the font's design size, #4 is a scale factor, #5 is the CMap
+% encoding (currently only OT1, OT1IT and OT1TT are allowed, pass
+% empty to omit).
+\def\setfont#1#2#3#4#5{%
+  \font#1=\fontprefix#2#3 scaled #4
+  \csname cmap#5\endcsname#1%
+}
+% This is what gets called when #5 of \setfont is empty.
+\let\cmap\gobble
+% emacs-page end of cmaps
+
+% Use cm as the default font prefix.
+% To specify the font prefix, you must define \fontprefix
+% before you read in texinfo.tex.
+\ifx\fontprefix\thisisundefined
+\def\fontprefix{cm}
+\fi
+% Support font families that don't use the same naming scheme as CM.
+\def\rmshape{r}
+\def\rmbshape{bx}               %where the normal face is bold
+\def\bfshape{b}
+\def\bxshape{bx}
+\def\ttshape{tt}
+\def\ttbshape{tt}
+\def\ttslshape{sltt}
+\def\itshape{ti}
+\def\itbshape{bxti}
+\def\slshape{sl}
+\def\slbshape{bxsl}
+\def\sfshape{ss}
+\def\sfbshape{ss}
+\def\scshape{csc}
+\def\scbshape{csc}
+
+% Definitions for a main text size of 11pt.  This is the default in
+% Texinfo.
+%
+\def\definetextfontsizexi{%
+% Text fonts (11.2pt, magstep1).
+\def\textnominalsize{11pt}
+\edef\mainmagstep{\magstephalf}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1095}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstep1}{OT1}
+\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter (and unnumbered) fonts (17.28pt).
+\def\chapnominalsize{17pt}
+\setfont\chaprm\rmbshape{12}{\magstep2}{OT1}
+\setfont\chapit\itbshape{10}{\magstep3}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep3}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep2}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep3}{OT1TT}
+\setfont\chapsf\sfbshape{17}{1000}{OT1}
+\let\chapbf=\chaprm
+\setfont\chapsc\scbshape{10}{\magstep3}{OT1}
+\font\chapi=cmmi12 scaled \magstep2
+\font\chapsy=cmsy10 scaled \magstep3
+\def\chapecsize{1728}
+
+% Section fonts (14.4pt).
+\def\secnominalsize{14pt}
+\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
+\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep2}{OT1}
+\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\secsf\sfbshape{12}{\magstep1}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep2}{OT1}
+\font\seci=cmmi12 scaled \magstep1
+\font\secsy=cmsy10 scaled \magstep2
+\def\sececsize{1440}
+
+% Subsection fonts (13.15pt).
+\def\ssecnominalsize{13pt}
+\setfont\ssecrm\rmbshape{12}{\magstephalf}{OT1}
+\setfont\ssecit\itbshape{10}{1315}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1315}{OT1}
+\setfont\ssectt\ttbshape{12}{\magstephalf}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1315}{OT1TT}
+\setfont\ssecsf\sfbshape{12}{\magstephalf}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1315}{OT1}
+\font\sseci=cmmi12 scaled \magstephalf
+\font\ssecsy=cmsy10 scaled 1315
+\def\ssececsize{1200}
+
+% Reduced fonts for @acro in text (10pt).
+\def\reducednominalsize{10pt}
+\setfont\reducedrm\rmshape{10}{1000}{OT1}
+\setfont\reducedtt\ttshape{10}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{1000}{OT1}
+\setfont\reducedit\itshape{10}{1000}{OT1IT}
+\setfont\reducedsl\slshape{10}{1000}{OT1}
+\setfont\reducedsf\sfshape{10}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{1000}{OT1}
+\setfont\reducedttsl\ttslshape{10}{1000}{OT1TT}
+\font\reducedi=cmmi10
+\font\reducedsy=cmsy10
+\def\reducedecsize{1000}
+
+\textleading = 13.2pt % line spacing for 11pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 11pt text font size definitions
+
+
+% Definitions to make the main text be 10pt Computer Modern, with
+% section, chapter, etc., sizes following suit.  This is for the GNU
+% Press printing of the Emacs 22 manual.  Maybe other manuals in the
+% future.  Used with @smallbook, which sets the leading to 12pt.
+%
+\def\definetextfontsizex{%
+% Text fonts (10pt).
+\def\textnominalsize{10pt}
+\edef\mainmagstep{1000}
+\setfont\textrm\rmshape{10}{\mainmagstep}{OT1}
+\setfont\texttt\ttshape{10}{\mainmagstep}{OT1TT}
+\setfont\textbf\bfshape{10}{\mainmagstep}{OT1}
+\setfont\textit\itshape{10}{\mainmagstep}{OT1IT}
+\setfont\textsl\slshape{10}{\mainmagstep}{OT1}
+\setfont\textsf\sfshape{10}{\mainmagstep}{OT1}
+\setfont\textsc\scshape{10}{\mainmagstep}{OT1}
+\setfont\textttsl\ttslshape{10}{\mainmagstep}{OT1TT}
+\font\texti=cmmi10 scaled \mainmagstep
+\font\textsy=cmsy10 scaled \mainmagstep
+\def\textecsize{1000}
+
+% A few fonts for @defun names and args.
+\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
+\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
+\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+
+% Fonts for indices, footnotes, small examples (9pt).
+\def\smallnominalsize{9pt}
+\setfont\smallrm\rmshape{9}{1000}{OT1}
+\setfont\smalltt\ttshape{9}{1000}{OT1TT}
+\setfont\smallbf\bfshape{10}{900}{OT1}
+\setfont\smallit\itshape{9}{1000}{OT1IT}
+\setfont\smallsl\slshape{9}{1000}{OT1}
+\setfont\smallsf\sfshape{9}{1000}{OT1}
+\setfont\smallsc\scshape{10}{900}{OT1}
+\setfont\smallttsl\ttslshape{10}{900}{OT1TT}
+\font\smalli=cmmi9
+\font\smallsy=cmsy9
+\def\smallecsize{0900}
+
+% Fonts for small examples (8pt).
+\def\smallernominalsize{8pt}
+\setfont\smallerrm\rmshape{8}{1000}{OT1}
+\setfont\smallertt\ttshape{8}{1000}{OT1TT}
+\setfont\smallerbf\bfshape{10}{800}{OT1}
+\setfont\smallerit\itshape{8}{1000}{OT1IT}
+\setfont\smallersl\slshape{8}{1000}{OT1}
+\setfont\smallersf\sfshape{8}{1000}{OT1}
+\setfont\smallersc\scshape{10}{800}{OT1}
+\setfont\smallerttsl\ttslshape{10}{800}{OT1TT}
+\font\smalleri=cmmi8
+\font\smallersy=cmsy8
+\def\smallerecsize{0800}
+
+% Fonts for title page (20.4pt):
+\def\titlenominalsize{20pt}
+\setfont\titlerm\rmbshape{12}{\magstep3}{OT1}
+\setfont\titleit\itbshape{10}{\magstep4}{OT1IT}
+\setfont\titlesl\slbshape{10}{\magstep4}{OT1}
+\setfont\titlett\ttbshape{12}{\magstep3}{OT1TT}
+\setfont\titlettsl\ttslshape{10}{\magstep4}{OT1TT}
+\setfont\titlesf\sfbshape{17}{\magstep1}{OT1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}{OT1}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\titleecsize{2074}
+
+% Chapter fonts (14.4pt).
+\def\chapnominalsize{14pt}
+\setfont\chaprm\rmbshape{12}{\magstep1}{OT1}
+\setfont\chapit\itbshape{10}{\magstep2}{OT1IT}
+\setfont\chapsl\slbshape{10}{\magstep2}{OT1}
+\setfont\chaptt\ttbshape{12}{\magstep1}{OT1TT}
+\setfont\chapttsl\ttslshape{10}{\magstep2}{OT1TT}
+\setfont\chapsf\sfbshape{12}{\magstep1}{OT1}
+\let\chapbf\chaprm
+\setfont\chapsc\scbshape{10}{\magstep2}{OT1}
+\font\chapi=cmmi12 scaled \magstep1
+\font\chapsy=cmsy10 scaled \magstep2
+\def\chapecsize{1440}
+
+% Section fonts (12pt).
+\def\secnominalsize{12pt}
+\setfont\secrm\rmbshape{12}{1000}{OT1}
+\setfont\secit\itbshape{10}{\magstep1}{OT1IT}
+\setfont\secsl\slbshape{10}{\magstep1}{OT1}
+\setfont\sectt\ttbshape{12}{1000}{OT1TT}
+\setfont\secttsl\ttslshape{10}{\magstep1}{OT1TT}
+\setfont\secsf\sfbshape{12}{1000}{OT1}
+\let\secbf\secrm
+\setfont\secsc\scbshape{10}{\magstep1}{OT1}
+\font\seci=cmmi12
+\font\secsy=cmsy10 scaled \magstep1
+\def\sececsize{1200}
+
+% Subsection fonts (10pt).
+\def\ssecnominalsize{10pt}
+\setfont\ssecrm\rmbshape{10}{1000}{OT1}
+\setfont\ssecit\itbshape{10}{1000}{OT1IT}
+\setfont\ssecsl\slbshape{10}{1000}{OT1}
+\setfont\ssectt\ttbshape{10}{1000}{OT1TT}
+\setfont\ssecttsl\ttslshape{10}{1000}{OT1TT}
+\setfont\ssecsf\sfbshape{10}{1000}{OT1}
+\let\ssecbf\ssecrm
+\setfont\ssecsc\scbshape{10}{1000}{OT1}
+\font\sseci=cmmi10
+\font\ssecsy=cmsy10
+\def\ssececsize{1000}
+
+% Reduced fonts for @acro in text (9pt).
+\def\reducednominalsize{9pt}
+\setfont\reducedrm\rmshape{9}{1000}{OT1}
+\setfont\reducedtt\ttshape{9}{1000}{OT1TT}
+\setfont\reducedbf\bfshape{10}{900}{OT1}
+\setfont\reducedit\itshape{9}{1000}{OT1IT}
+\setfont\reducedsl\slshape{9}{1000}{OT1}
+\setfont\reducedsf\sfshape{9}{1000}{OT1}
+\setfont\reducedsc\scshape{10}{900}{OT1}
+\setfont\reducedttsl\ttslshape{10}{900}{OT1TT}
+\font\reducedi=cmmi9
+\font\reducedsy=cmsy9
+\def\reducedecsize{0900}
+
+\divide\parskip by 2  % reduce space between paragraphs
+\textleading = 12pt   % line spacing for 10pt CM
+\textfonts            % reset the current fonts
+\rm
+} % end of 10pt text font size definitions
+
+
+% We provide the user-level command
+%   @fonttextsize 10
+% (or 11) to redefine the text font size.  pt is assumed.
+%
+\def\xiword{11}
+\def\xword{10}
+\def\xwordpt{10pt}
+%
+\parseargdef\fonttextsize{%
+  \def\textsizearg{#1}%
+  %\wlog{doing @fonttextsize \textsizearg}%
+  %
+  % Set \globaldefs so that documents can use this inside @tex, since
+  % makeinfo 4.8 does not support it, but we need it nonetheless.
+  %
+ \begingroup \globaldefs=1
+  \ifx\textsizearg\xword \definetextfontsizex
+  \else \ifx\textsizearg\xiword \definetextfontsizexi
+  \else
+    \errhelp=\EMsimple
+    \errmessage{@fonttextsize only supports `10' or `11', not `\textsizearg'}
+  \fi\fi
+ \endgroup
+}
+
+
+% In order for the font changes to affect most math symbols and letters,
+% we have to define the \textfont of the standard families.  Since
+% texinfo doesn't allow for producing subscripts and superscripts except
+% in the main text, we don't bother to reset \scriptfont and
+% \scriptscriptfont (which would also require loading a lot more fonts).
+%
+\def\resetmathfonts{%
+  \textfont0=\tenrm \textfont1=\teni \textfont2=\tensy
+  \textfont\itfam=\tenit \textfont\slfam=\tensl \textfont\bffam=\tenbf
+  \textfont\ttfam=\tentt \textfont\sffam=\tensf
+}
+
+% The font-changing commands redefine the meanings of \tenSTYLE, instead
+% of just \STYLE.  We do this because \STYLE needs to also set the
+% current \fam for math mode.  Our \STYLE (e.g., \rm) commands hardwire
+% \tenSTYLE to set the current font.
+%
+% Each font-changing command also sets the names \lsize (one size lower)
+% and \lllsize (three sizes lower).  These relative commands are used in
+% the LaTeX logo and acronyms.
+%
+% This all needs generalizing, badly.
+%
+\def\textfonts{%
+  \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl
+  \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
+  \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy
+  \let\tenttsl=\textttsl
+  \def\curfontsize{text}%
+  \def\lsize{reduced}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{\textleading}}
+\def\titlefonts{%
+  \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
+  \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
+  \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
+  \let\tenttsl=\titlettsl
+  \def\curfontsize{title}%
+  \def\lsize{chap}\def\lllsize{subsec}%
+  \resetmathfonts \setleading{27pt}}
+\def\titlefont#1{{\titlefonts\rmisbold #1}}
+\def\chapfonts{%
+  \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
+  \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
+  \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy
+  \let\tenttsl=\chapttsl
+  \def\curfontsize{chap}%
+  \def\lsize{sec}\def\lllsize{text}%
+  \resetmathfonts \setleading{19pt}}
+\def\secfonts{%
+  \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl
+  \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\secsc
+  \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy
+  \let\tenttsl=\secttsl
+  \def\curfontsize{sec}%
+  \def\lsize{subsec}\def\lllsize{reduced}%
+  \resetmathfonts \setleading{16pt}}
+\def\subsecfonts{%
+  \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl
+  \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc
+  \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy
+  \let\tenttsl=\ssecttsl
+  \def\curfontsize{ssec}%
+  \def\lsize{text}\def\lllsize{small}%
+  \resetmathfonts \setleading{15pt}}
+\let\subsubsecfonts = \subsecfonts
+\def\reducedfonts{%
+  \let\tenrm=\reducedrm \let\tenit=\reducedit \let\tensl=\reducedsl
+  \let\tenbf=\reducedbf \let\tentt=\reducedtt \let\reducedcaps=\reducedsc
+  \let\tensf=\reducedsf \let\teni=\reducedi \let\tensy=\reducedsy
+  \let\tenttsl=\reducedttsl
+  \def\curfontsize{reduced}%
+  \def\lsize{small}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallfonts{%
+  \let\tenrm=\smallrm \let\tenit=\smallit \let\tensl=\smallsl
+  \let\tenbf=\smallbf \let\tentt=\smalltt \let\smallcaps=\smallsc
+  \let\tensf=\smallsf \let\teni=\smalli \let\tensy=\smallsy
+  \let\tenttsl=\smallttsl
+  \def\curfontsize{small}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{10.5pt}}
+\def\smallerfonts{%
+  \let\tenrm=\smallerrm \let\tenit=\smallerit \let\tensl=\smallersl
+  \let\tenbf=\smallerbf \let\tentt=\smallertt \let\smallcaps=\smallersc
+  \let\tensf=\smallersf \let\teni=\smalleri \let\tensy=\smallersy
+  \let\tenttsl=\smallerttsl
+  \def\curfontsize{smaller}%
+  \def\lsize{smaller}\def\lllsize{smaller}%
+  \resetmathfonts \setleading{9.5pt}}
+
+% Fonts for short table of contents.
+\setfont\shortcontrm\rmshape{12}{1000}{OT1}
+\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1}  % no cmb12
+\setfont\shortcontsl\slshape{12}{1000}{OT1}
+\setfont\shortconttt\ttshape{12}{1000}{OT1TT}
+
+% Define these just so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
+% Set the fonts to use with the @small... environments.
+\let\smallexamplefonts = \smallfonts
+
+% About \smallexamplefonts.  If we use \smallfonts (9pt), @smallexample
+% can fit this many characters:
+%   8.5x11=86   smallbook=72  a4=90  a5=69
+% If we use \scriptfonts (8pt), then we can fit this many characters:
+%   8.5x11=90+  smallbook=80  a4=90+  a5=77
+% For me, subjectively, the few extra characters that fit aren't worth
+% the additional smallness of 8pt.  So I'm making the default 9pt.
+%
+% By the way, for comparison, here's what fits with @example (10pt):
+%   8.5x11=71  smallbook=60  a4=75  a5=58
+% --karl, 24jan03.
+
+% Set up the default fonts, so we can use them for creating boxes.
+%
+\definetextfontsizexi
+
+
+\message{markup,}
+
+% Check if we are currently using a typewriter font.  Since all the
+% Computer Modern typewriter fonts have zero interword stretch (and
+% shrink), and it is reasonable to expect all typewriter fonts to have
+% this property, we can check that font parameter.
+%
+\def\ifmonospace{\ifdim\fontdimen3\font=0pt }
+
+% Markup style infrastructure.  \defmarkupstylesetup\INITMACRO will
+% define and register \INITMACRO to be called on markup style changes.
+% \INITMACRO can check \currentmarkupstyle for the innermost
+% style and the set of \ifmarkupSTYLE switches for all styles
+% currently in effect.
+\newif\ifmarkupvar
+\newif\ifmarkupsamp
+\newif\ifmarkupkey
+%\newif\ifmarkupfile % @file == @samp.
+%\newif\ifmarkupoption % @option == @samp.
+\newif\ifmarkupcode
+\newif\ifmarkupkbd
+%\newif\ifmarkupenv % @env == @code.
+%\newif\ifmarkupcommand % @command == @code.
+\newif\ifmarkuptex % @tex (and part of @math, for now).
+\newif\ifmarkupexample
+\newif\ifmarkupverb
+\newif\ifmarkupverbatim
+
+\let\currentmarkupstyle\empty
+
+\def\setupmarkupstyle#1{%
+  \csname markup#1true\endcsname
+  \def\currentmarkupstyle{#1}%
+  \markupstylesetup
+}
+
+\let\markupstylesetup\empty
+
+\def\defmarkupstylesetup#1{%
+  \expandafter\def\expandafter\markupstylesetup
+    \expandafter{\markupstylesetup #1}%
+  \def#1%
+}
+
+% Markup style setup for left and right quotes.
+\defmarkupstylesetup\markupsetuplq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuplq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuplqdefault \else \temp \fi
+}
+
+\defmarkupstylesetup\markupsetuprq{%
+  \expandafter\let\expandafter \temp
+    \csname markupsetuprq\currentmarkupstyle\endcsname
+  \ifx\temp\relax \markupsetuprqdefault \else \temp \fi
+}
+
+{
+\catcode`\'=\active
+\catcode`\`=\active
+
+\gdef\markupsetuplqdefault{\let`\lq}
+\gdef\markupsetuprqdefault{\let'\rq}
+
+\gdef\markupsetcodequoteleft{\let`\codequoteleft}
+\gdef\markupsetcodequoteright{\let'\codequoteright}
+
+\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft}
+}
+
+\let\markupsetuplqcode \markupsetcodequoteleft
+\let\markupsetuprqcode \markupsetcodequoteright
+%
+\let\markupsetuplqexample \markupsetcodequoteleft
+\let\markupsetuprqexample \markupsetcodequoteright
+%
+\let\markupsetuplqsamp \markupsetcodequoteleft
+\let\markupsetuprqsamp \markupsetcodequoteright
+%
+\let\markupsetuplqverb \markupsetcodequoteleft
+\let\markupsetuprqverb \markupsetcodequoteright
+%
+\let\markupsetuplqverbatim \markupsetcodequoteleft
+\let\markupsetuprqverbatim \markupsetcodequoteright
+
+\let\markupsetuplqkbd \markupsetnoligaturesquoteleft
+
+% Allow an option to not use regular directed right quote/apostrophe
+% (char 0x27), but instead the undirected quote from cmtt (char 0x0d).
+% The undirected quote is ugly, so don't make it the default, but it
+% works for pasting with more pdf viewers (at least evince), the
+% lilypond developers report.  xpdf does work with the regular 0x27.
+%
+\def\codequoteright{%
+  \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax
+    \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax
+      '%
+    \else \char'15 \fi
+  \else \char'15 \fi
+}
+%
+% and a similar option for the left quote char vs. a grave accent.
+% Modern fonts display ASCII 0x60 as a grave accent, so some people like
+% the code environments to do likewise.
+%
+\def\codequoteleft{%
+  \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax
+    \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax
+      % [Knuth] pp. 380,381,391
+      % \relax disables Spanish ligatures ?` and !` of \tt font.
+      \relax`%
+    \else \char'22 \fi
+  \else \char'22 \fi
+}
+
+% Commands to set the quote options.
+% 
+\parseargdef\codequoteundirected{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequoteundirected\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}%
+  \fi\fi
+}
+%
+\parseargdef\codequotebacktick{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = t%
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxicodequotebacktick\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}%
+  \fi\fi
+}
+
+% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font.
+\def\noligaturesquoteleft{\relax\lq}
+
+% Count depth in font-changes, for error checks
+\newcount\fontdepth \fontdepth=0
+
+% Font commands.
+
+% #1 is the font command (\sl or \it), #2 is the text to slant.
+% If we are in a monospaced environment, however, 1) always use \ttsl,
+% and 2) do not add an italic correction.
+\def\dosmartslant#1#2{%
+  \ifusingtt 
+    {{\ttsl #2}\let\next=\relax}%
+    {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
+  \next
+}
+\def\smartslanted{\dosmartslant\sl}
+\def\smartitalic{\dosmartslant\it}
+
+% Output an italic correction unless \next (presumed to be the following
+% character) is such as not to need one.
+\def\smartitaliccorrection{%
+  \ifx\next,%
+  \else\ifx\next-%
+  \else\ifx\next.%
+  \else\ptexslash
+  \fi\fi\fi}
+
+% like \smartslanted except unconditionally uses \ttsl, and no ic.
+% @var is set to this for defun arguments.
+\def\ttslanted#1{{\ttsl #1}}
+
+% @cite is like \smartslanted except unconditionally use \sl.  We never want
+% ttsl for book titles, do we?
+\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection}
+
+\let\i=\smartitalic
+\let\slanted=\smartslanted
+\def\var#1{\smartslanted{#1}}
+\let\dfn=\smartslanted
+\let\emph=\smartitalic
+
+% Explicit font changes: @r, @sc, undocumented @ii.
+\def\r#1{{\rm #1}}              % roman font
+\def\sc#1{{\smallcaps#1}}       % smallcaps font
+\def\ii#1{{\it #1}}             % italic font
+
+% @b, explicit bold.  Also @strong.
+\def\b#1{{\bf #1}}
+\let\strong=\b
+
+% @sansserif, explicit sans.
+\def\sansserif#1{{\sf #1}}
+
+% We can't just use \exhyphenpenalty, because that only has effect at
+% the end of a paragraph.  Restore normal hyphenation at the end of the
+% group within which \nohyphenation is presumably called.
+%
+\def\nohyphenation{\hyphenchar\font = -1  \aftergroup\restorehyphenation}
+\def\restorehyphenation{\hyphenchar\font = `- }
+
+% Set sfcode to normal for the chars that usually have another value.
+% Can't use plain's \frenchspacing because it uses the `\x notation, and
+% sometimes \x has an active definition that messes things up.
+%
+\catcode`@=11
+  \def\plainfrenchspacing{%
+    \sfcode\dotChar  =\@m \sfcode\questChar=\@m \sfcode\exclamChar=\@m
+    \sfcode\colonChar=\@m \sfcode\semiChar =\@m \sfcode\commaChar =\@m
+    \def\endofsentencespacefactor{1000}% for @. and friends
+  }
+  \def\plainnonfrenchspacing{%
+    \sfcode`\.3000\sfcode`\?3000\sfcode`\!3000
+    \sfcode`\:2000\sfcode`\;1500\sfcode`\,1250
+    \def\endofsentencespacefactor{3000}% for @. and friends
+  }
+\catcode`@=\other
+\def\endofsentencespacefactor{3000}% default
+
+% @t, explicit typewriter.
+\def\t#1{%
+  {\tt \rawbackslash \plainfrenchspacing #1}%
+  \null
+}
+
+% @samp.
+\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}}
+
+% definition of @key that produces a lozenge.  Doesn't adjust to text size.
+%\setfont\keyrm\rmshape{8}{1000}{OT1}
+%\font\keysy=cmsy9
+%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{%
+%  \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
+%    \vbox{\hrule\kern-0.4pt
+%     \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
+%    \kern-0.4pt\hrule}%
+%  \kern-.06em\raise0.4pt\hbox{\angleright}}}}
+
+% definition of @key with no lozenge.  If the current font is already
+% monospace, don't change it; that way, we respect @kbdinputstyle.  But
+% if it isn't monospace, then use \tt.
+%
+\def\key#1{{\setupmarkupstyle{key}%
+  \nohyphenation
+  \ifmonospace\else\tt\fi
+  #1}\null}
+
+% ctrl is no longer a Texinfo command.
+\def\ctrl #1{{\tt \rawbackslash \hat}#1}
+
+% @file, @option are the same as @samp.
+\let\file=\samp
+\let\option=\samp
+
+% @code is a modification of @t,
+% which makes spaces the same size as normal in the surrounding text.
+\def\tclose#1{%
+  {%
+    % Change normal interword space to be same as for the current font.
+    \spaceskip = \fontdimen2\font
+    %
+    % Switch to typewriter.
+    \tt
+    %
+    % But `\ ' produces the large typewriter interword space.
+    \def\ {{\spaceskip = 0pt{} }}%
+    %
+    % Turn off hyphenation.
+    \nohyphenation
+    %
+    \rawbackslash
+    \plainfrenchspacing
+    #1%
+  }%
+  \null
+}
+
+% We *must* turn on hyphenation at `-' and `_' in @code.
+% Otherwise, it is too hard to avoid overfull hboxes
+% in the Emacs manual, the Library manual, etc.
+
+% Unfortunately, TeX uses one parameter (\hyphenchar) to control
+% both hyphenation at - and hyphenation within words.
+% We must therefore turn them both off (\tclose does that)
+% and arrange explicitly to hyphenate at a dash.
+%  -- rms.
+{
+  \catcode`\-=\active \catcode`\_=\active
+  \catcode`\'=\active \catcode`\`=\active
+  \global\let'=\rq \global\let`=\lq  % default definitions
+  %
+  \global\def\code{\begingroup
+    \setupmarkupstyle{code}%
+    % The following should really be moved into \setupmarkupstyle handlers.
+    \catcode\dashChar=\active  \catcode\underChar=\active
+    \ifallowcodebreaks
+     \let-\codedash
+     \let_\codeunder
+    \else
+     \let-\realdash
+     \let_\realunder
+    \fi
+    \codex
+  }
+}
+
+\def\codex #1{\tclose{#1}\endgroup}
+
+\def\realdash{-}
+\def\codedash{-\discretionary{}{}{}}
+\def\codeunder{%
+  % this is all so @math{@code{var_name}+1} can work.  In math mode, _
+  % is "active" (mathcode"8000) and \normalunderscore (or \char95, etc.)
+  % will therefore expand the active definition of _, which is us
+  % (inside @code that is), therefore an endless loop.
+  \ifusingtt{\ifmmode
+               \mathchar"075F % class 0=ordinary, family 7=ttfam, pos 0x5F=_.
+             \else\normalunderscore \fi
+             \discretionary{}{}{}}%
+            {\_}%
+}
+
+% An additional complication: the above will allow breaks after, e.g.,
+% each of the four underscores in __typeof__.  This is undesirable in
+% some manuals, especially if they don't have long identifiers in
+% general.  @allowcodebreaks provides a way to control this.
+%
+\newif\ifallowcodebreaks  \allowcodebreakstrue
+
+\def\keywordtrue{true}
+\def\keywordfalse{false}
+
+\parseargdef\allowcodebreaks{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\keywordtrue
+    \allowcodebreakstrue
+  \else\ifx\txiarg\keywordfalse
+    \allowcodebreaksfalse
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}%
+  \fi\fi
+}
+
+% @uref (abbreviation for `urlref') takes an optional (comma-separated)
+% second argument specifying the text to display and an optional third
+% arg as text to display instead of (rather than in addition to) the url
+% itself.  First (mandatory) arg is the url.
+% (This \urefnobreak definition isn't used now, leaving it for a while
+% for comparison.)
+\def\urefnobreak#1{\dourefnobreak #1,,,\finish}
+\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        \unhbox0             % PDF: 2nd arg given, show only it
+      \else
+        \unhbox0\ (\code{#1})% DVI: 2nd arg given, show both it and url
+      \fi
+    \else
+      \code{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% This \urefbreak definition is the active one.
+\def\urefbreak{\begingroup \urefcatcodes \dourefbreak}
+\let\uref=\urefbreak
+\def\dourefbreak#1{\urefbreakfinish #1,,,\finish}
+\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example
+  \unsepspaces
+  \pdfurl{#1}%
+  \setbox0 = \hbox{\ignorespaces #3}%
+  \ifdim\wd0 > 0pt
+    \unhbox0 % third arg given, show only that
+  \else
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0 > 0pt
+      \ifpdf
+        \unhbox0             % PDF: 2nd arg given, show only it
+      \else
+        \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url
+      \fi
+    \else
+      \urefcode{#1}% only url given, so show it
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% Allow line breaks around only a few characters (only).
+\def\urefcatcodes{%
+  \catcode\ampChar=\active   \catcode\dotChar=\active
+  \catcode\hashChar=\active  \catcode\questChar=\active
+  \catcode\slashChar=\active
+}
+{
+  \urefcatcodes
+  %
+  \global\def\urefcode{\begingroup
+    \setupmarkupstyle{code}%
+    \urefcatcodes
+    \let&\urefcodeamp
+    \let.\urefcodedot
+    \let#\urefcodehash
+    \let?\urefcodequest
+    \let/\urefcodeslash
+    \codex
+  }
+  %
+  % By default, they are just regular characters.
+  \global\def&{\normalamp}
+  \global\def.{\normaldot}
+  \global\def#{\normalhash}
+  \global\def?{\normalquest}
+  \global\def/{\normalslash}
+}
+
+% we put a little stretch before and after the breakable chars, to help
+% line breaking of long url's.  The unequal skips make look better in
+% cmtt at least, especially for dots.
+\def\urefprestretch{\urefprebreak \hskip0pt plus.13em }
+\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em }
+%
+\def\urefcodeamp{\urefprestretch \&\urefpoststretch}
+\def\urefcodedot{\urefprestretch .\urefpoststretch}
+\def\urefcodehash{\urefprestretch \#\urefpoststretch}
+\def\urefcodequest{\urefprestretch ?\urefpoststretch}
+\def\urefcodeslash{\futurelet\next\urefcodeslashfinish}
+{
+  \catcode`\/=\active
+  \global\def\urefcodeslashfinish{%
+    \urefprestretch \slashChar
+    % Allow line break only after the final / in a sequence of
+    % slashes, to avoid line break between the slashes in http://.
+    \ifx\next/\else \urefpoststretch \fi
+  }
+}
+
+% One more complication: by default we'll break after the special
+% characters, but some people like to break before the special chars, so
+% allow that.  Also allow no breaking at all, for manual control.
+% 
+\parseargdef\urefbreakstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\wordnone
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordbefore
+    \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak}
+  \else\ifx\txiarg\wordafter
+    \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak}
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @urefbreakstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\wordafter{after}
+\def\wordbefore{before}
+\def\wordnone{none}
+
+\urefbreakstyle after
+
+% @url synonym for @uref, since that's how everyone uses it.
+%
+\let\url=\uref
+
+% rms does not like angle brackets --karl, 17may97.
+% So now @email is just like @uref, unless we are pdf.
+%
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\ifpdf
+  \def\email#1{\doemail#1,,\finish}
+  \def\doemail#1,#2,#3\finish{\begingroup
+    \unsepspaces
+    \pdfurl{mailto:#1}%
+    \setbox0 = \hbox{\ignorespaces #2}%
+    \ifdim\wd0>0pt\unhbox0\else\code{#1}\fi
+    \endlink
+  \endgroup}
+\else
+  \let\email=\uref
+\fi
+
+% @kbd is like @code, except that if the argument is just one @key command,
+% then @kbd has no effect.
+\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}}
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+%   `example' (@kbd uses ttsl only inside of @example and friends),
+%   or `code' (@kbd uses normal tty font always).
+\parseargdef\kbdinputstyle{%
+  \def\txiarg{#1}%
+  \ifx\txiarg\worddistinct
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+  \else\ifx\txiarg\wordexample
+    \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+  \else\ifx\txiarg\wordcode
+    \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @kbdinputstyle setting `\txiarg'}%
+  \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is `distinct'.
+\kbdinputstyle distinct
+
+\def\xkey{\key}
+\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
+\ifx\one\xkey\ifx\threex\three \key{#2}%
+\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi
+\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi}
+
+% For @indicateurl, @env, @command quotes seem unnecessary, so use \code.
+\let\indicateurl=\code
+\let\env=\code
+\let\command=\code
+
+% @clicksequence{File @click{} Open ...}
+\def\clicksequence#1{\begingroup #1\endgroup}
+
+% @clickstyle @arrow   (by default)
+\parseargdef\clickstyle{\def\click{#1}}
+\def\click{\arrow}
+
+% Typeset a dimension, e.g., `in' or `pt'.  The only reason for the
+% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt.
+%
+\def\dmn#1{\thinspace #1}
+
+% @l was never documented to mean ``switch to the Lisp font'',
+% and it is not used as such in any manual I can find.  We need it for
+% Polish suppressed-l.  --karl, 22sep96.
+%\def\l#1{{\li #1}\null}
+
+% @acronym for "FBI", "NATO", and the like.
+% We print this one point size smaller, since it's intended for
+% all-uppercase.
+%
+\def\acronym#1{\doacronym #1,,\finish}
+\def\doacronym#1,#2,#3\finish{%
+  {\selectfonts\lsize #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+}
+
+% @abbr for "Comput. J." and the like.
+% No font change, but don't do end-of-sentence spacing.
+%
+\def\abbr#1{\doabbr #1,,\finish}
+\def\doabbr#1,#2,#3\finish{%
+  {\plainfrenchspacing #1}%
+  \def\temp{#2}%
+  \ifx\temp\empty \else
+    \space ({\unsepspaces \ignorespaces \temp \unskip})%
+  \fi
+}
+
+% @asis just yields its argument.  Used with @table, for example.
+%
+\def\asis#1{#1}
+
+% @math outputs its argument in math mode.
+%
+% One complication: _ usually means subscripts, but it could also mean
+% an actual _ character, as in @math{@var{some_variable} + 1}.  So make
+% _ active, and distinguish by seeing if the current family is \slfam,
+% which is what @var uses.
+{
+  \catcode`\_ = \active
+  \gdef\mathunderscore{%
+    \catcode`\_=\active
+    \def_{\ifnum\fam=\slfam \_\else\sb\fi}%
+  }
+}
+% Another complication: we want \\ (and @\) to output a math (or tt) \.
+% FYI, plain.tex uses \\ as a temporary control sequence (for no
+% particular reason), but this is not advertised and we don't care.
+%
+% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\.
+\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi}
+%
+\def\math{%
+  \tex
+  \mathunderscore
+  \let\\ = \mathbackslash
+  \mathactive
+  % make the texinfo accent commands work in math mode
+  \let\"=\ddot
+  \let\'=\acute
+  \let\==\bar
+  \let\^=\hat
+  \let\`=\grave
+  \let\u=\breve
+  \let\v=\check
+  \let\~=\tilde
+  \let\dotaccent=\dot
+  $\finishmath
+}
+\def\finishmath#1{#1$\endgroup}  % Close the group opened by \tex.
+
+% Some active characters (such as <) are spaced differently in math.
+% We have to reset their definitions in case the @math was an argument
+% to a command which sets the catcodes (such as @item or @section).
+%
+{
+  \catcode`^ = \active
+  \catcode`< = \active
+  \catcode`> = \active
+  \catcode`+ = \active
+  \catcode`' = \active
+  \gdef\mathactive{%
+    \let^ = \ptexhat
+    \let< = \ptexless
+    \let> = \ptexgtr
+    \let+ = \ptexplus
+    \let' = \ptexquoteright
+  }
+}
+
+
+\message{glyphs,}
+% and logos.
+
+% @@ prints an @.
+\def\@{\char64 }
+
+% Used to generate quoted braces.  Unless we're in typewriter, use
+% \ecfont because the CM text fonts do not have braces, and we don't
+% want to switch into math.
+\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}}
+\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}}
+\let\{=\mylbrace
+\let\}=\myrbrace
+\begingroup
+  % Definitions to produce \{ and \} commands for indices,
+  % and @{ and @} for the aux/toc files.
+  \catcode`\{ = \other \catcode`\} = \other
+  \catcode`\[ = 1 \catcode`\] = 2
+  \catcode`\! = 0 \catcode`\\ = \other
+  !gdef!lbracecmd[\{]%
+  !gdef!rbracecmd[\}]%
+  !gdef!lbraceatcmd[@{]%
+  !gdef!rbraceatcmd[@}]%
+!endgroup
+
+% @comma{} to avoid , parsing problems.
+\let\comma = ,
+
+% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent
+% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H.
+\let\, = \ptexc
+\let\dotaccent = \ptexdot
+\def\ringaccent#1{{\accent23 #1}}
+\let\tieaccent = \ptext
+\let\ubaraccent = \ptexb
+\let\udotaccent = \d
+
+% Other special characters: @questiondown @exclamdown @ordf @ordm
+% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss.
+\def\questiondown{?`}
+\def\exclamdown{!`}
+\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}}
+\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}}
+
+% Dotless i and dotless j, used for accents.
+\def\imacro{i}
+\def\jmacro{j}
+\def\dotless#1{%
+  \def\temp{#1}%
+  \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi
+  \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi
+  \else \errmessage{@dotless can be used only with i or j}%
+  \fi\fi
+}
+
+% The \TeX{} logo, as in plain, but resetting the spacing so that a
+% period following counts as ending a sentence.  (Idea found in latex.)
+%
+\edef\TeX{\TeX \spacefactor=1000 }
+
+% @LaTeX{} logo.  Not quite the same results as the definition in
+% latex.ltx, since we use a different font for the raised A; it's most
+% convenient for us to use an explicitly smaller font, rather than using
+% the \scriptstyle font (since we don't reset \scriptstyle and
+% \scriptscriptstyle).
+%
+\def\LaTeX{%
+  L\kern-.36em
+  {\setbox0=\hbox{T}%
+   \vbox to \ht0{\hbox{%
+     \ifx\textnominalsize\xwordpt
+       % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX.
+       % Revert to plain's \scriptsize, which is 7pt.
+       \count255=\the\fam $\fam\count255 \scriptstyle A$%
+     \else
+       % For 11pt, we can use our lllsize.
+       \selectfonts\lllsize A%
+     \fi
+     }%
+     \vss
+  }}%
+  \kern-.15em
+  \TeX
+}
+
+% Some math mode symbols.
+\def\bullet{$\ptexbullet$}
+\def\geq{\ifmmode \ge\else $\ge$\fi}
+\def\leq{\ifmmode \le\else $\le$\fi}
+\def\minus{\ifmmode -\else $-$\fi}
+
+% @dots{} outputs an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in the cm
+% typewriter fonts as three actual period characters; on the other hand,
+% in other typewriter fonts three periods are wider than 1.5em.  So do
+% whichever is larger.
+%
+\def\dots{%
+  \leavevmode
+  \setbox0=\hbox{...}% get width of three periods
+  \ifdim\wd0 > 1.5em
+    \dimen0 = \wd0
+  \else
+    \dimen0 = 1.5em
+  \fi
+  \hbox to \dimen0{%
+    \hskip 0pt plus.25fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus1fil
+    .\hskip 0pt plus.5fil
+  }%
+}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+  \dots
+  \spacefactor=\endofsentencespacefactor
+}
+
+% @point{}, @result{}, @expansion{}, @print{}, @equiv{}.
+%
+% Since these characters are used in examples, they should be an even number of
+% \tt widths. Each \tt character is 1en, so two makes it 1em.
+%
+\def\point{$\star$}
+\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}}
+\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}}
+\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}}
+\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}}
+\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}}
+
+% The @error{} command.
+% Adapted from the TeXbook's \boxit.
+%
+\newbox\errorbox
+%
+{\tentt \global\dimen0 = 3em}% Width of the box.
+\dimen2 = .55pt % Thickness of rules
+% The text. (`r' is open on the right, `e' somewhat less so on the left.)
+\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt}
+%
+\setbox\errorbox=\hbox to \dimen0{\hfil
+   \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right.
+   \advance\hsize by -2\dimen2 % Rules.
+   \vbox{%
+      \hrule height\dimen2
+      \hbox{\vrule width\dimen2 \kern3pt          % Space to left of text.
+         \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below.
+         \kern3pt\vrule width\dimen2}% Space to right.
+      \hrule height\dimen2}
+    \hfil}
+%
+\def\error{\leavevmode\lower.7ex\copy\errorbox}
+
+% @pounds{} is a sterling sign, which Knuth put in the CM italic font.
+%
+\def\pounds{{\it\$}}
+
+% @euro{} comes from a separate font, depending on the current style.
+% We use the free feym* fonts from the eurosym package by Henrik
+% Theiling, which support regular, slanted, bold and bold slanted (and
+% "outlined" (blackboard board, sort of) versions, which we don't need).
+% It is available from http://www.ctan.org/tex-archive/fonts/eurosym.
+%
+% Although only regular is the truly official Euro symbol, we ignore
+% that.  The Euro is designed to be slightly taller than the regular
+% font height.
+%
+% feymr - regular
+% feymo - slanted
+% feybr - bold
+% feybo - bold slanted
+%
+% There is no good (free) typewriter version, to my knowledge.
+% A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide.
+% Hmm.
+%
+% Also doesn't work in math.  Do we need to do math with euro symbols?
+% Hope not.
+%
+%
+\def\euro{{\eurofont e}}
+\def\eurofont{%
+  % We set the font at each command, rather than predefining it in
+  % \textfonts and the other font-switching commands, so that
+  % installations which never need the symbol don't have to have the
+  % font installed.
+  %
+  % There is only one designed size (nominal 10pt), so we always scale
+  % that to the current nominal size.
+  %
+  % By the way, simply using "at 1em" works for cmr10 and the like, but
+  % does not work for cmbx10 and other extended/shrunken fonts.
+  %
+  \def\eurosize{\csname\curfontsize nominalsize\endcsname}%
+  %
+  \ifx\curfontstyle\bfstylename
+    % bold:
+    \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize
+  \else
+    % regular:
+    \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize
+  \fi
+  \thiseurofont
+}
+
+% Glyphs from the EC fonts.  We don't use \let for the aliases, because
+% sometimes we redefine the original macro, and the alias should reflect
+% the redefinition.
+%
+% Use LaTeX names for the Icelandic letters.
+\def\DH{{\ecfont \char"D0}} % Eth
+\def\dh{{\ecfont \char"F0}} % eth
+\def\TH{{\ecfont \char"DE}} % Thorn
+\def\th{{\ecfont \char"FE}} % thorn
+%
+\def\guillemetleft{{\ecfont \char"13}}
+\def\guillemotleft{\guillemetleft}
+\def\guillemetright{{\ecfont \char"14}}
+\def\guillemotright{\guillemetright}
+\def\guilsinglleft{{\ecfont \char"0E}}
+\def\guilsinglright{{\ecfont \char"0F}}
+\def\quotedblbase{{\ecfont \char"12}}
+\def\quotesinglbase{{\ecfont \char"0D}}
+%
+% This positioning is not perfect (see the ogonek LaTeX package), but
+% we have the precomposed glyphs for the most common cases.  We put the
+% tests to use those glyphs in the single \ogonek macro so we have fewer
+% dummy definitions to worry about for index entries, etc.
+%
+% ogonek is also used with other letters in Lithuanian (IOU), but using
+% the precomposed glyphs for those is not so easy since they aren't in
+% the same EC font.
+\def\ogonek#1{{%
+  \def\temp{#1}%
+  \ifx\temp\macrocharA\Aogonek
+  \else\ifx\temp\macrochara\aogonek
+  \else\ifx\temp\macrocharE\Eogonek
+  \else\ifx\temp\macrochare\eogonek
+  \else
+    \ecfont \setbox0=\hbox{#1}%
+    \ifdim\ht0=1ex\accent"0C #1%
+    \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}%
+    \fi
+  \fi\fi\fi\fi
+  }%
+}
+\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A}
+\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a}
+\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
+\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
+%
+% Use the ec* fonts (cm-super in outline format) for non-CM glyphs.
+\def\ecfont{%
+  % We can't distinguish serif/sans and italic/slanted, but this
+  % is used for crude hacks anyway (like adding French and German
+  % quotes to documents typeset with CM, where we lose kerning), so
+  % hopefully nobody will notice/care.
+  \edef\ecsize{\csname\curfontsize ecsize\endcsname}%
+  \edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
+  \ifx\curfontstyle\bfstylename
+    % bold:
+    \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+  \else
+    % regular:
+    \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+  \fi
+  \thisecfont
+}
+
+% @registeredsymbol - R in a circle.  The font for the R should really
+% be smaller yet, but lllsize is the best we can do for now.
+% Adapted from the plain.tex definition of \copyright.
+%
+\def\registeredsymbol{%
+  $^{{\ooalign{\hfil\raise.07ex\hbox{\selectfonts\lllsize R}%
+               \hfil\crcr\Orb}}%
+    }$%
+}
+
+% @textdegree - the normal degrees sign.
+%
+\def\textdegree{$^\circ$}
+
+% Laurent Siebenmann reports \Orb undefined with:
+%  Textures 1.7.7 (preloaded format=plain 93.10.14)  (68K)  16 APR 2004 02:38
+% so we'll define it if necessary.
+%
+\ifx\Orb\thisisundefined
+\def\Orb{\mathhexbox20D}
+\fi
+
+% Quotes.
+\chardef\quotedblleft="5C
+\chardef\quotedblright=`\"
+\chardef\quoteleft=`\`
+\chardef\quoteright=`\'
+
+
+\message{page headings,}
+
+\newskip\titlepagetopglue \titlepagetopglue = 1.5in
+\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
+
+% First the title page.  Must do @settitle before @titlepage.
+\newif\ifseenauthor
+\newif\iffinishedtitlepage
+
+% Do an implicit @contents or @shortcontents after @end titlepage if the
+% user says @setcontentsaftertitlepage or @setshortcontentsaftertitlepage.
+%
+\newif\ifsetcontentsaftertitlepage
+ \let\setcontentsaftertitlepage = \setcontentsaftertitlepagetrue
+\newif\ifsetshortcontentsaftertitlepage
+ \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue
+
+\parseargdef\shorttitlepage{%
+  \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}%
+  \endgroup\page\hbox{}\page}
+
+\envdef\titlepage{%
+  % Open one extra group, as we want to close it in the middle of \Etitlepage.
+  \begingroup
+    \parindent=0pt \textfonts
+    % Leave some space at the very top of the page.
+    \vglue\titlepagetopglue
+    % No rule at page bottom unless we print one at the top with @title.
+    \finishedtitlepagetrue
+    %
+    % Most title ``pages'' are actually two pages long, with space
+    % at the top of the second.  We don't want the ragged left on the second.
+    \let\oldpage = \page
+    \def\page{%
+      \iffinishedtitlepage\else
+	 \finishtitlepage
+      \fi
+      \let\page = \oldpage
+      \page
+      \null
+    }%
+}
+
+\def\Etitlepage{%
+    \iffinishedtitlepage\else
+	\finishtitlepage
+    \fi
+    % It is important to do the page break before ending the group,
+    % because the headline and footline are only empty inside the group.
+    % If we use the new definition of \page, we always get a blank page
+    % after the title page, which we certainly don't want.
+    \oldpage
+  \endgroup
+  %
+  % Need this before the \...aftertitlepage checks so that if they are
+  % in effect the toc pages will come out with page numbers.
+  \HEADINGSon
+  %
+  % If they want short, they certainly want long too.
+  \ifsetshortcontentsaftertitlepage
+    \shortcontents
+    \contents
+    \global\let\shortcontents = \relax
+    \global\let\contents = \relax
+  \fi
+  %
+  \ifsetcontentsaftertitlepage
+    \contents
+    \global\let\contents = \relax
+    \global\let\shortcontents = \relax
+  \fi
+}
+
+\def\finishtitlepage{%
+  \vskip4pt \hrule height 2pt width \hsize
+  \vskip\titlepagebottomglue
+  \finishedtitlepagetrue
+}
+
+% Macros to be used within @titlepage:
+
+\let\subtitlerm=\tenrm
+\def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}
+
+\parseargdef\title{%
+  \checkenv\titlepage
+  \leftline{\titlefonts\rmisbold #1}
+  % print a rule at the page bottom also.
+  \finishedtitlepagefalse
+  \vskip4pt \hrule height 4pt width \hsize \vskip4pt
+}
+
+\parseargdef\subtitle{%
+  \checkenv\titlepage
+  {\subtitlefont \rightline{#1}}%
+}
+
+% @author should come last, but may come many times.
+% It can also be used inside @quotation.
+%
+\parseargdef\author{%
+  \def\temp{\quotation}%
+  \ifx\thisenv\temp
+    \def\quotationauthor{#1}% printed in \Equotation.
+  \else
+    \checkenv\titlepage
+    \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi
+    {\secfonts\rmisbold \leftline{#1}}%
+  \fi
+}
+
+
+% Set up page headings and footings.
+
+\let\thispage=\folio
+
+\newtoks\evenheadline    % headline on even pages
+\newtoks\oddheadline     % headline on odd pages
+\newtoks\evenfootline    % footline on even pages
+\newtoks\oddfootline     % footline on odd pages
+
+% Now make TeX use those variables
+\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
+                            \else \the\evenheadline \fi}}
+\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
+                            \else \the\evenfootline \fi}\HEADINGShook}
+\let\HEADINGShook=\relax
+
+% Commands to set those variables.
+% For example, this is what  @headings on  does
+% @evenheading @thistitle|@thispage|@thischapter
+% @oddheading @thischapter|@thispage|@thistitle
+% @evenfooting @thisfile||
+% @oddfooting ||@thisfile
+
+
+\def\evenheading{\parsearg\evenheadingxxx}
+\def\evenheadingxxx #1{\evenheadingyyy #1\|\|\|\|\finish}
+\def\evenheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddheading{\parsearg\oddheadingxxx}
+\def\oddheadingxxx #1{\oddheadingyyy #1\|\|\|\|\finish}
+\def\oddheadingyyy #1\|#2\|#3\|#4\finish{%
+\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\parseargdef\everyheading{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
+
+\def\evenfooting{\parsearg\evenfootingxxx}
+\def\evenfootingxxx #1{\evenfootingyyy #1\|\|\|\|\finish}
+\def\evenfootingyyy #1\|#2\|#3\|#4\finish{%
+\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+
+\def\oddfooting{\parsearg\oddfootingxxx}
+\def\oddfootingxxx #1{\oddfootingyyy #1\|\|\|\|\finish}
+\def\oddfootingyyy #1\|#2\|#3\|#4\finish{%
+  \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+  %
+  % Leave some space for the footline.  Hopefully ok to assume
+  % @evenfooting will not be used by itself.
+  \global\advance\pageheight by -12pt
+  \global\advance\vsize by -12pt
+}
+
+\parseargdef\everyfooting{\oddfootingxxx{#1}\evenfootingxxx{#1}}
+
+% @evenheadingmarks top     \thischapter <- chapter at the top of a page
+% @evenheadingmarks bottom  \thischapter <- chapter at the bottom of a page
+%
+% The same set of arguments for:
+%
+% @oddheadingmarks
+% @evenfootingmarks
+% @oddfootingmarks
+% @everyheadingmarks
+% @everyfootingmarks
+
+\def\evenheadingmarks{\headingmarks{even}{heading}}
+\def\oddheadingmarks{\headingmarks{odd}{heading}}
+\def\evenfootingmarks{\headingmarks{even}{footing}}
+\def\oddfootingmarks{\headingmarks{odd}{footing}}
+\def\everyheadingmarks#1 {\headingmarks{even}{heading}{#1}
+                          \headingmarks{odd}{heading}{#1} }
+\def\everyfootingmarks#1 {\headingmarks{even}{footing}{#1}
+                          \headingmarks{odd}{footing}{#1} }
+% #1 = even/odd, #2 = heading/footing, #3 = top/bottom.
+\def\headingmarks#1#2#3 {%
+  \expandafter\let\expandafter\temp \csname get#3headingmarks\endcsname
+  \global\expandafter\let\csname get#1#2marks\endcsname \temp
+}
+
+\everyheadingmarks bottom
+\everyfootingmarks bottom
+
+% @headings double      turns headings on for double-sided printing.
+% @headings single      turns headings on for single-sided printing.
+% @headings off         turns them off.
+% @headings on          same as @headings double, retained for compatibility.
+% @headings after       turns on double-sided headings after this page.
+% @headings doubleafter turns on double-sided headings after this page.
+% @headings singleafter turns on single-sided headings after this page.
+% By default, they are off at the start of a document,
+% and turned `on' after @end titlepage.
+
+\def\headings #1 {\csname HEADINGS#1\endcsname}
+
+\def\headingsoff{% non-global headings elimination
+  \evenheadline={\hfil}\evenfootline={\hfil}%
+   \oddheadline={\hfil}\oddfootline={\hfil}%
+}
+
+\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting
+\HEADINGSoff  % it's the default
+
+% When we turn headings on, set the page number to 1.
+% For double-sided printing, put current file name in lower left corner,
+% chapter name on inside top of right hand pages, document
+% title on inside top of left hand pages, and page numbers on outside top
+% edge of all pages.
+\def\HEADINGSdouble{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+\let\contentsalignmacro = \chappager
+
+% For single-sided printing, chapter title goes across top left of page,
+% page number on top right.
+\def\HEADINGSsingle{%
+\global\pageno=1
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+\def\HEADINGSon{\HEADINGSdouble}
+
+\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex}
+\let\HEADINGSdoubleafter=\HEADINGSafter
+\def\HEADINGSdoublex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\folio\hfil\thistitle}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chapoddpage
+}
+
+\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex}
+\def\HEADINGSsinglex{%
+\global\evenfootline={\hfil}
+\global\oddfootline={\hfil}
+\global\evenheadline={\line{\thischapter\hfil\folio}}
+\global\oddheadline={\line{\thischapter\hfil\folio}}
+\global\let\contentsalignmacro = \chappager
+}
+
+% Subroutines used in generating headings
+% This produces Day Month Year style of output.
+% Only define if not already defined, in case a txi-??.tex file has set
+% up a different format (e.g., txi-cs.tex does this).
+\ifx\today\thisisundefined
+\def\today{%
+  \number\day\space
+  \ifcase\month
+  \or\putwordMJan\or\putwordMFeb\or\putwordMMar\or\putwordMApr
+  \or\putwordMMay\or\putwordMJun\or\putwordMJul\or\putwordMAug
+  \or\putwordMSep\or\putwordMOct\or\putwordMNov\or\putwordMDec
+  \fi
+  \space\number\year}
+\fi
+
+% @settitle line...  specifies the title of the document, for headings.
+% It generates no output of its own.
+\def\thistitle{\putwordNoTitle}
+\def\settitle{\parsearg{\gdef\thistitle}}
+
+
+\message{tables,}
+% Tables -- @table, @ftable, @vtable, @item(x).
+
+% default indentation of table text
+\newdimen\tableindent \tableindent=.8in
+% default indentation of @itemize and @enumerate text
+\newdimen\itemindent  \itemindent=.3in
+% margin between end of table item and start of table text.
+\newdimen\itemmargin  \itemmargin=.1in
+
+% used internally for \itemindent minus \itemmargin
+\newdimen\itemmax
+
+% Note @table, @ftable, and @vtable define @item, @itemx, etc., with
+% these defs.
+% They also define \itemindex
+% to index the item name in whatever manner is desired (perhaps none).
+
+\newif\ifitemxneedsnegativevskip
+
+\def\itemxpar{\par\ifitemxneedsnegativevskip\nobreak\vskip-\parskip\nobreak\fi}
+
+\def\internalBitem{\smallbreak \parsearg\itemzzz}
+\def\internalBitemx{\itemxpar \parsearg\itemzzz}
+
+\def\itemzzz #1{\begingroup %
+  \advance\hsize by -\rightskip
+  \advance\hsize by -\tableindent
+  \setbox0=\hbox{\itemindicate{#1}}%
+  \itemindex{#1}%
+  \nobreak % This prevents a break before @itemx.
+  %
+  % If the item text does not fit in the space we have, put it on a line
+  % by itself, and do not allow a page break either before or after that
+  % line.  We do not start a paragraph here because then if the next
+  % command is, e.g., @kindex, the whatsit would get put into the
+  % horizontal list on a line by itself, resulting in extra blank space.
+  \ifdim \wd0>\itemmax
+    %
+    % Make this a paragraph so we get the \parskip glue and wrapping,
+    % but leave it ragged-right.
+    \begingroup
+      \advance\leftskip by-\tableindent
+      \advance\hsize by\tableindent
+      \advance\rightskip by0pt plus1fil\relax
+      \leavevmode\unhbox0\par
+    \endgroup
+    %
+    % We're going to be starting a paragraph, but we don't want the
+    % \parskip glue -- logically it's part of the @item we just started.
+    \nobreak \vskip-\parskip
+    %
+    % Stop a page break at the \parskip glue coming up.  However, if
+    % what follows is an environment such as @example, there will be no
+    % \parskip glue; then the negative vskip we just inserted would
+    % cause the example and the item to crash together.  So we use this
+    % bizarre value of 10001 as a signal to \aboveenvbreak to insert
+    % \parskip glue after all.  Section titles are handled this way also.
+    %
+    \penalty 10001
+    \endgroup
+    \itemxneedsnegativevskipfalse
+  \else
+    % The item text fits into the space.  Start a paragraph, so that the
+    % following text (if any) will end up on the same line.
+    \noindent
+    % Do this with kerns and \unhbox so that if there is a footnote in
+    % the item text, it can migrate to the main vertical list and
+    % eventually be printed.
+    \nobreak\kern-\tableindent
+    \dimen0 = \itemmax  \advance\dimen0 by \itemmargin \advance\dimen0 by -\wd0
+    \unhbox0
+    \nobreak\kern\dimen0
+    \endgroup
+    \itemxneedsnegativevskiptrue
+  \fi
+}
+
+\def\item{\errmessage{@item while not in a list environment}}
+\def\itemx{\errmessage{@itemx while not in a list environment}}
+
+% @table, @ftable, @vtable.
+\envdef\table{%
+  \let\itemindex\gobble
+  \tablecheck{table}%
+}
+\envdef\ftable{%
+  \def\itemindex ##1{\doind {fn}{\code{##1}}}%
+  \tablecheck{ftable}%
+}
+\envdef\vtable{%
+  \def\itemindex ##1{\doind {vr}{\code{##1}}}%
+  \tablecheck{vtable}%
+}
+\def\tablecheck#1{%
+  \ifnum \the\catcode`\^^M=\active
+    \endgroup
+    \errmessage{This command won't work in this context; perhaps the problem is
+      that we are \inenvironment\thisenv}%
+    \def\next{\doignore{#1}}%
+  \else
+    \let\next\tablex
+  \fi
+  \next
+}
+\def\tablex#1{%
+  \def\itemindicate{#1}%
+  \parsearg\tabley
+}
+\def\tabley#1{%
+  {%
+    \makevalueexpandable
+    \edef\temp{\noexpand\tablez #1\space\space\space}%
+    \expandafter
+  }\temp \endtablez
+}
+\def\tablez #1 #2 #3 #4\endtablez{%
+  \aboveenvbreak
+  \ifnum 0#1>0 \advance \leftskip by #1\mil \fi
+  \ifnum 0#2>0 \tableindent=#2\mil \fi
+  \ifnum 0#3>0 \advance \rightskip by #3\mil \fi
+  \itemmax=\tableindent
+  \advance \itemmax by -\itemmargin
+  \advance \leftskip by \tableindent
+  \exdentamount=\tableindent
+  \parindent = 0pt
+  \parskip = \smallskipamount
+  \ifdim \parskip=0pt \parskip=2pt \fi
+  \let\item = \internalBitem
+  \let\itemx = \internalBitemx
+}
+\def\Etable{\endgraf\afterenvbreak}
+\let\Eftable\Etable
+\let\Evtable\Etable
+\let\Eitemize\Etable
+\let\Eenumerate\Etable
+
+% This is the counter used by @enumerate, which is really @itemize
+
+\newcount \itemno
+
+\envdef\itemize{\parsearg\doitemize}
+
+\def\doitemize#1{%
+  \aboveenvbreak
+  \itemmax=\itemindent
+  \advance\itemmax by -\itemmargin
+  \advance\leftskip by \itemindent
+  \exdentamount=\itemindent
+  \parindent=0pt
+  \parskip=\smallskipamount
+  \ifdim\parskip=0pt \parskip=2pt \fi
+  %
+  % Try typesetting the item mark that if the document erroneously says
+  % something like @itemize @samp (intending @table), there's an error
+  % right away at the @itemize.  It's not the best error message in the
+  % world, but it's better than leaving it to the @item.  This means if
+  % the user wants an empty mark, they have to say @w{} not just @w.
+  \def\itemcontents{#1}%
+  \setbox0 = \hbox{\itemcontents}%
+  %
+  % @itemize with no arg is equivalent to @itemize @bullet.
+  \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi
+  %
+  \let\item=\itemizeitem
+}
+
+% Definition of @item while inside @itemize and @enumerate.
+%
+\def\itemizeitem{%
+  \advance\itemno by 1  % for enumerations
+  {\let\par=\endgraf \smallbreak}% reasonable place to break
+  {%
+   % If the document has an @itemize directly after a section title, a
+   % \nobreak will be last on the list, and \sectionheading will have
+   % done a \vskip-\parskip.  In that case, we don't want to zero
+   % parskip, or the item text will crash with the heading.  On the
+   % other hand, when there is normal text preceding the item (as there
+   % usually is), we do want to zero parskip, or there would be too much
+   % space.  In that case, we won't have a \nobreak before.  At least
+   % that's the theory.
+   \ifnum\lastpenalty<10000 \parskip=0in \fi
+   \noindent
+   \hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
+   %
+   \vadjust{\penalty 1200}}% not good to break after first line of item.
+  \flushcr
+}
+
+% \splitoff TOKENS\endmark defines \first to be the first token in
+% TOKENS, and \rest to be the remainder.
+%
+\def\splitoff#1#2\endmark{\def\first{#1}\def\rest{#2}}%
+
+% Allow an optional argument of an uppercase letter, lowercase letter,
+% or number, to specify the first label in the enumerated list.  No
+% argument is the same as `1'.
+%
+\envparseargdef\enumerate{\enumeratey #1  \endenumeratey}
+\def\enumeratey #1 #2\endenumeratey{%
+  % If we were given no argument, pretend we were given `1'.
+  \def\thearg{#1}%
+  \ifx\thearg\empty \def\thearg{1}\fi
+  %
+  % Detect if the argument is a single token.  If so, it might be a
+  % letter.  Otherwise, the only valid thing it can be is a number.
+  % (We will always have one token, because of the test we just made.
+  % This is a good thing, since \splitoff doesn't work given nothing at
+  % all -- the first parameter is undelimited.)
+  \expandafter\splitoff\thearg\endmark
+  \ifx\rest\empty
+    % Only one token in the argument.  It could still be anything.
+    % A ``lowercase letter'' is one whose \lccode is nonzero.
+    % An ``uppercase letter'' is one whose \lccode is both nonzero, and
+    %   not equal to itself.
+    % Otherwise, we assume it's a number.
+    %
+    % We need the \relax at the end of the \ifnum lines to stop TeX from
+    % continuing to look for a <number>.
+    %
+    \ifnum\lccode\expandafter`\thearg=0\relax
+      \numericenumerate % a number (we hope)
+    \else
+      % It's a letter.
+      \ifnum\lccode\expandafter`\thearg=\expandafter`\thearg\relax
+        \lowercaseenumerate % lowercase letter
+      \else
+        \uppercaseenumerate % uppercase letter
+      \fi
+    \fi
+  \else
+    % Multiple tokens in the argument.  We hope it's a number.
+    \numericenumerate
+  \fi
+}
+
+% An @enumerate whose labels are integers.  The starting integer is
+% given in \thearg.
+%
+\def\numericenumerate{%
+  \itemno = \thearg
+  \startenumeration{\the\itemno}%
+}
+
+% The starting (lowercase) letter is in \thearg.
+\def\lowercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more lowercase letters in @enumerate; get a bigger
+                  alphabet}%
+    \fi
+    \char\lccode\itemno
+  }%
+}
+
+% The starting (uppercase) letter is in \thearg.
+\def\uppercaseenumerate{%
+  \itemno = \expandafter`\thearg
+  \startenumeration{%
+    % Be sure we're not beyond the end of the alphabet.
+    \ifnum\itemno=0
+      \errmessage{No more uppercase letters in @enumerate; get a bigger
+                  alphabet}
+    \fi
+    \char\uccode\itemno
+  }%
+}
+
+% Call \doitemize, adding a period to the first argument and supplying the
+% common last two arguments.  Also subtract one from the initial value in
+% \itemno, since @item increments \itemno.
+%
+\def\startenumeration#1{%
+  \advance\itemno by -1
+  \doitemize{#1.}\flushcr
+}
+
+% @alphaenumerate and @capsenumerate are abbreviations for giving an arg
+% to @enumerate.
+%
+\def\alphaenumerate{\enumerate{a}}
+\def\capsenumerate{\enumerate{A}}
+\def\Ealphaenumerate{\Eenumerate}
+\def\Ecapsenumerate{\Eenumerate}
+
+
+% @multitable macros
+% Amy Hendrickson, 8/18/94, 3/6/96
+%
+% @multitable ... @end multitable will make as many columns as desired.
+% Contents of each column will wrap at width given in preamble.  Width
+% can be specified either with sample text given in a template line,
+% or in percent of \hsize, the current width of text on page.
+
+% Table can continue over pages but will only break between lines.
+
+% To make preamble:
+%
+% Either define widths of columns in terms of percent of \hsize:
+%   @multitable @columnfractions .25 .3 .45
+%   @item ...
+%
+%   Numbers following @columnfractions are the percent of the total
+%   current hsize to be used for each column. You may use as many
+%   columns as desired.
+
+
+% Or use a template:
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item ...
+%   using the widest term desired in each column.
+
+% Each new table line starts with @item, each subsequent new column
+% starts with @tab. Empty columns may be produced by supplying @tab's
+% with nothing between them for as many times as empty columns are needed,
+% ie, @tab@tab@tab will produce two empty columns.
+
+% @item, @tab do not need to be on their own lines, but it will not hurt
+% if they are.
+
+% Sample multitable:
+
+%   @multitable {Column 1 template} {Column 2 template} {Column 3 template}
+%   @item first col stuff @tab second col stuff @tab third col
+%   @item
+%   first col stuff
+%   @tab
+%   second col stuff
+%   @tab
+%   third col
+%   @item first col stuff @tab second col stuff
+%   @tab Many paragraphs of text may be used in any column.
+%
+%         They will wrap at the width determined by the template.
+%   @item@tab@tab This will be in third column.
+%   @end multitable
+
+% Default dimensions may be reset by user.
+% @multitableparskip is vertical space between paragraphs in table.
+% @multitableparindent is paragraph indent in table.
+% @multitablecolmargin is horizontal space to be left between columns.
+% @multitablelinespace is space to leave between table items, baseline
+%                                                            to baseline.
+%   0pt means it depends on current normal line spacing.
+%
+\newskip\multitableparskip
+\newskip\multitableparindent
+\newdimen\multitablecolspace
+\newskip\multitablelinespace
+\multitableparskip=0pt
+\multitableparindent=6pt
+\multitablecolspace=12pt
+\multitablelinespace=0pt
+
+% Macros used to set up halign preamble:
+%
+\let\endsetuptable\relax
+\def\xendsetuptable{\endsetuptable}
+\let\columnfractions\relax
+\def\xcolumnfractions{\columnfractions}
+\newif\ifsetpercent
+
+% #1 is the @columnfraction, usually a decimal number like .5, but might
+% be just 1.  We just use it, whatever it is.
+%
+\def\pickupwholefraction#1 {%
+  \global\advance\colcount by 1
+  \expandafter\xdef\csname col\the\colcount\endcsname{#1\hsize}%
+  \setuptable
+}
+
+\newcount\colcount
+\def\setuptable#1{%
+  \def\firstarg{#1}%
+  \ifx\firstarg\xendsetuptable
+    \let\go = \relax
+  \else
+    \ifx\firstarg\xcolumnfractions
+      \global\setpercenttrue
+    \else
+      \ifsetpercent
+         \let\go\pickupwholefraction
+      \else
+         \global\advance\colcount by 1
+         \setbox0=\hbox{#1\unskip\space}% Add a normal word space as a
+                   % separator; typically that is always in the input, anyway.
+         \expandafter\xdef\csname col\the\colcount\endcsname{\the\wd0}%
+      \fi
+    \fi
+    \ifx\go\pickupwholefraction
+      % Put the argument back for the \pickupwholefraction call, so
+      % we'll always have a period there to be parsed.
+      \def\go{\pickupwholefraction#1}%
+    \else
+      \let\go = \setuptable
+    \fi%
+  \fi
+  \go
+}
+
+% multitable-only commands.
+%
+% @headitem starts a heading row, which we typeset in bold.
+% Assignments have to be global since we are inside the implicit group
+% of an alignment entry.  \everycr resets \everytab so we don't have to
+% undo it ourselves.
+\def\headitemfont{\b}% for people to use in the template row; not changeable
+\def\headitem{%
+  \checkenv\multitable
+  \crcr
+  \global\everytab={\bf}% can't use \headitemfont since the parsing differs
+  \the\everytab % for the first item
+}%
+%
+% A \tab used to include \hskip1sp.  But then the space in a template
+% line is not enough.  That is bad.  So let's go back to just `&' until
+% we again encounter the problem the 1sp was intended to solve.
+%					--karl, nathan@acm.org, 20apr99.
+\def\tab{\checkenv\multitable &\the\everytab}%
+
+% @multitable ... @end multitable definitions:
+%
+\newtoks\everytab  % insert after every tab.
+%
+\envdef\multitable{%
+  \vskip\parskip
+  \startsavinginserts
+  %
+  % @item within a multitable starts a normal row.
+  % We use \def instead of \let so that if one of the multitable entries
+  % contains an @itemize, we don't choke on the \item (seen as \crcr aka
+  % \endtemplate) expanding \doitemize.
+  \def\item{\crcr}%
+  %
+  \tolerance=9500
+  \hbadness=9500
+  \setmultitablespacing
+  \parskip=\multitableparskip
+  \parindent=\multitableparindent
+  \overfullrule=0pt
+  \global\colcount=0
+  %
+  \everycr = {%
+    \noalign{%
+      \global\everytab={}%
+      \global\colcount=0 % Reset the column counter.
+      % Check for saved footnotes, etc.
+      \checkinserts
+      % Keeps underfull box messages off when table breaks over pages.
+      %\filbreak
+	% Maybe so, but it also creates really weird page breaks when the
+	% table breaks over pages. Wouldn't \vfil be better?  Wait until the
+	% problem manifests itself, so it can be fixed for real --karl.
+    }%
+  }%
+  %
+  \parsearg\domultitable
+}
+\def\domultitable#1{%
+  % To parse everything between @multitable and @item:
+  \setuptable#1 \endsetuptable
+  %
+  % This preamble sets up a generic column definition, which will
+  % be used as many times as user calls for columns.
+  % \vtop will set a single line and will also let text wrap and
+  % continue for many paragraphs if desired.
+  \halign\bgroup &%
+    \global\advance\colcount by 1
+    \multistrut
+    \vtop{%
+      % Use the current \colcount to find the correct column width:
+      \hsize=\expandafter\csname col\the\colcount\endcsname
+      %
+      % In order to keep entries from bumping into each other
+      % we will add a \leftskip of \multitablecolspace to all columns after
+      % the first one.
+      %
+      % If a template has been used, we will add \multitablecolspace
+      % to the width of each template entry.
+      %
+      % If the user has set preamble in terms of percent of \hsize we will
+      % use that dimension as the width of the column, and the \leftskip
+      % will keep entries from bumping into each other.  Table will start at
+      % left margin and final column will justify at right margin.
+      %
+      % Make sure we don't inherit \rightskip from the outer environment.
+      \rightskip=0pt
+      \ifnum\colcount=1
+	% The first column will be indented with the surrounding text.
+	\advance\hsize by\leftskip
+      \else
+	\ifsetpercent \else
+	  % If user has not set preamble in terms of percent of \hsize
+	  % we will advance \hsize by \multitablecolspace.
+	  \advance\hsize by \multitablecolspace
+	\fi
+       % In either case we will make \leftskip=\multitablecolspace:
+      \leftskip=\multitablecolspace
+      \fi
+      % Ignoring space at the beginning and end avoids an occasional spurious
+      % blank line, when TeX decides to break the line at the space before the
+      % box from the multistrut, so the strut ends up on a line by itself.
+      % For example:
+      % @multitable @columnfractions .11 .89
+      % @item @code{#}
+      % @tab Legal holiday which is valid in major parts of the whole country.
+      % Is automatically provided with highlighting sequences respectively
+      % marking characters.
+      \noindent\ignorespaces##\unskip\multistrut
+    }\cr
+}
+\def\Emultitable{%
+  \crcr
+  \egroup % end the \halign
+  \global\setpercentfalse
+}
+
+\def\setmultitablespacing{%
+  \def\multistrut{\strut}% just use the standard line spacing
+  %
+  % Compute \multitablelinespace (if not defined by user) for use in
+  % \multitableparskip calculation.  We used define \multistrut based on
+  % this, but (ironically) that caused the spacing to be off.
+  % See bug-texinfo report from Werner Lemberg, 31 Oct 2004 12:52:20 +0100.
+\ifdim\multitablelinespace=0pt
+\setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip
+\global\advance\multitablelinespace by-\ht0
+\fi
+% Test to see if parskip is larger than space between lines of
+% table. If not, do nothing.
+%        If so, set to same dimension as multitablelinespace.
+\ifdim\multitableparskip>\multitablelinespace
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi%
+\ifdim\multitableparskip=0pt
+\global\multitableparskip=\multitablelinespace
+\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller
+                                      % than skip between lines in the table.
+\fi}
+
+
+\message{conditionals,}
+
+% @iftex, @ifnotdocbook, @ifnothtml, @ifnotinfo, @ifnotplaintext,
+% @ifnotxml always succeed.  They currently do nothing; we don't
+% attempt to check whether the conditionals are properly nested.  But we
+% have to remember that they are conditionals, so that @end doesn't
+% attempt to close an environment group.
+%
+\def\makecond#1{%
+  \expandafter\let\csname #1\endcsname = \relax
+  \expandafter\let\csname iscond.#1\endcsname = 1
+}
+\makecond{iftex}
+\makecond{ifnotdocbook}
+\makecond{ifnothtml}
+\makecond{ifnotinfo}
+\makecond{ifnotplaintext}
+\makecond{ifnotxml}
+
+% Ignore @ignore, @ifhtml, @ifinfo, and the like.
+%
+\def\direntry{\doignore{direntry}}
+\def\documentdescription{\doignore{documentdescription}}
+\def\docbook{\doignore{docbook}}
+\def\html{\doignore{html}}
+\def\ifdocbook{\doignore{ifdocbook}}
+\def\ifhtml{\doignore{ifhtml}}
+\def\ifinfo{\doignore{ifinfo}}
+\def\ifnottex{\doignore{ifnottex}}
+\def\ifplaintext{\doignore{ifplaintext}}
+\def\ifxml{\doignore{ifxml}}
+\def\ignore{\doignore{ignore}}
+\def\menu{\doignore{menu}}
+\def\xml{\doignore{xml}}
+
+% Ignore text until a line `@end #1', keeping track of nested conditionals.
+%
+% A count to remember the depth of nesting.
+\newcount\doignorecount
+
+\def\doignore#1{\begingroup
+  % Scan in ``verbatim'' mode:
+  \obeylines
+  \catcode`\@ = \other
+  \catcode`\{ = \other
+  \catcode`\} = \other
+  %
+  % Make sure that spaces turn into tokens that match what \doignoretext wants.
+  \spaceisspace
+  %
+  % Count number of #1's that we've seen.
+  \doignorecount = 0
+  %
+  % Swallow text until we reach the matching `@end #1'.
+  \dodoignore{#1}%
+}
+
+{ \catcode`_=11 % We want to use \_STOP_ which cannot appear in texinfo source.
+  \obeylines %
+  %
+  \gdef\dodoignore#1{%
+    % #1 contains the command name as a string, e.g., `ifinfo'.
+    %
+    % Define a command to find the next `@end #1'.
+    \long\def\doignoretext##1^^M@end #1{%
+      \doignoretextyyy##1^^M@#1\_STOP_}%
+    %
+    % And this command to find another #1 command, at the beginning of a
+    % line.  (Otherwise, we would consider a line `@c @ifset', for
+    % example, to count as an @ifset for nesting.)
+    \long\def\doignoretextyyy##1^^M@#1##2\_STOP_{\doignoreyyy{##2}\_STOP_}%
+    %
+    % And now expand that command.
+    \doignoretext ^^M%
+  }%
+}
+
+\def\doignoreyyy#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty			% Nothing found.
+    \let\next\doignoretextzzz
+  \else					% Found a nested condition, ...
+    \advance\doignorecount by 1
+    \let\next\doignoretextyyy		% ..., look for another.
+    % If we're here, #1 ends with ^^M\ifinfo (for example).
+  \fi
+  \next #1% the token \_STOP_ is present just after this macro.
+}
+
+% We have to swallow the remaining "\_STOP_".
+%
+\def\doignoretextzzz#1{%
+  \ifnum\doignorecount = 0	% We have just found the outermost @end.
+    \let\next\enddoignore
+  \else				% Still inside a nested condition.
+    \advance\doignorecount by -1
+    \let\next\doignoretext      % Look for the next @end.
+  \fi
+  \next
+}
+
+% Finish off ignored text.
+{ \obeylines%
+  % Ignore anything after the last `@end #1'; this matters in verbatim
+  % environments, where otherwise the newline after an ignored conditional
+  % would result in a blank line in the output.
+  \gdef\enddoignore#1^^M{\endgroup\ignorespaces}%
+}
+
+
+% @set VAR sets the variable VAR to an empty value.
+% @set VAR REST-OF-LINE sets VAR to the value REST-OF-LINE.
+%
+% Since we want to separate VAR from REST-OF-LINE (which might be
+% empty), we can't just use \parsearg; we have to insert a space of our
+% own to delimit the rest of the line, and then take it out again if we
+% didn't need it.
+% We rely on the fact that \parsearg sets \catcode`\ =10.
+%
+\parseargdef\set{\setyyy#1 \endsetyyy}
+\def\setyyy#1 #2\endsetyyy{%
+  {%
+    \makevalueexpandable
+    \def\temp{#2}%
+    \edef\next{\gdef\makecsname{SET#1}}%
+    \ifx\temp\empty
+      \next{}%
+    \else
+      \setzzz#2\endsetzzz
+    \fi
+  }%
+}
+% Remove the trailing space \setxxx inserted.
+\def\setzzz#1 \endsetzzz{\next{#1}}
+
+% @clear VAR clears (i.e., unsets) the variable VAR.
+%
+\parseargdef\clear{%
+  {%
+    \makevalueexpandable
+    \global\expandafter\let\csname SET#1\endcsname=\relax
+  }%
+}
+
+% @value{foo} gets the text saved in variable foo.
+\def\value{\begingroup\makevalueexpandable\valuexxx}
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+{
+  \catcode`\- = \active \catcode`\_ = \active
+  %
+  \gdef\makevalueexpandable{%
+    \let\value = \expandablevalue
+    % We don't want these characters active, ...
+    \catcode`\-=\other \catcode`\_=\other
+    % ..., but we might end up with active ones in the argument if
+    % we're called from @code, as @code{@value{foo-bar_}}, though.
+    % So \let them to their normal equivalents.
+    \let-\realdash \let_\normalunderscore
+  }
+}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we call \makevalueexpandable in \indexdummies).
+% The command has to be fully expandable (if the variable is set), since
+% the result winds up in the index file.  This means that if the
+% variable's value contains other Texinfo commands, it's almost certain
+% it will fail (although perhaps we could fix that with sufficient work
+% to do a one-level expansion on the result, instead of complete).
+%
+\def\expandablevalue#1{%
+  \expandafter\ifx\csname SET#1\endcsname\relax
+    {[No value for ``#1'']}%
+    \message{Variable `#1', used in @value, is not set.}%
+  \else
+    \csname SET#1\endcsname
+  \fi
+}
+
+% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
+% with @set.
+%
+% To get special treatment of `@end ifset,' call \makeond and the redefine.
+%
+\makecond{ifset}
+\def\ifset{\parsearg{\doifset{\let\next=\ifsetfail}}}
+\def\doifset#1#2{%
+  {%
+    \makevalueexpandable
+    \let\next=\empty
+    \expandafter\ifx\csname SET#2\endcsname\relax
+      #1% If not set, redefine \next.
+    \fi
+    \expandafter
+  }\next
+}
+\def\ifsetfail{\doignore{ifset}}
+
+% @ifclear VAR ... @end ifclear reads the `...' iff VAR has never been
+% defined with @set, or has been undefined with @clear.
+%
+% The `\else' inside the `\doifset' parameter is a trick to reuse the
+% above code: if the variable is not set, do nothing, if it is set,
+% then redefine \next to \ifclearfail.
+%
+\makecond{ifclear}
+\def\ifclear{\parsearg{\doifset{\else \let\next=\ifclearfail}}}
+\def\ifclearfail{\doignore{ifclear}}
+
+% @dircategory CATEGORY  -- specify a category of the dir file
+% which this file should belong to.  Ignore this in TeX.
+\let\dircategory=\comment
+
+% @defininfoenclose.
+\let\definfoenclose=\comment
+
+
+\message{indexing,}
+% Index generation facilities
+
+% Define \newwrite to be identical to plain tex's \newwrite
+% except not \outer, so it can be used within macros and \if's.
+\edef\newwrite{\makecsname{ptexnewwrite}}
+
+% \newindex {foo} defines an index named foo.
+% It automatically defines \fooindex such that
+% \fooindex ...rest of line... puts an entry in the index foo.
+% It also defines \fooindfile to be the number of the output channel for
+% the file that accumulates this index.  The file's extension is foo.
+% The name of an index should be no more than 2 characters long
+% for the sake of vms.
+%
+\def\newindex#1{%
+  \iflinks
+    \expandafter\newwrite \csname#1indfile\endcsname
+    \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+  \fi
+  \expandafter\xdef\csname#1index\endcsname{%     % Define @#1index
+    \noexpand\doindex{#1}}
+}
+
+% @defindex foo  ==  \newindex{foo}
+%
+\def\defindex{\parsearg\newindex}
+
+% Define @defcodeindex, like @defindex except put all entries in @code.
+%
+\def\defcodeindex{\parsearg\newcodeindex}
+%
+\def\newcodeindex#1{%
+  \iflinks
+    \expandafter\newwrite \csname#1indfile\endcsname
+    \openout \csname#1indfile\endcsname \jobname.#1
+  \fi
+  \expandafter\xdef\csname#1index\endcsname{%
+    \noexpand\docodeindex{#1}}%
+}
+
+
+% @synindex foo bar    makes index foo feed into index bar.
+% Do this instead of @defindex foo if you don't want it as a separate index.
+%
+% @syncodeindex foo bar   similar, but put all entries made for index foo
+% inside @code.
+%
+\def\synindex#1 #2 {\dosynindex\doindex{#1}{#2}}
+\def\syncodeindex#1 #2 {\dosynindex\docodeindex{#1}{#2}}
+
+% #1 is \doindex or \docodeindex, #2 the index getting redefined (foo),
+% #3 the target index (bar).
+\def\dosynindex#1#2#3{%
+  % Only do \closeout if we haven't already done it, else we'll end up
+  % closing the target index.
+  \expandafter \ifx\csname donesynindex#2\endcsname \relax
+    % The \closeout helps reduce unnecessary open files; the limit on the
+    % Acorn RISC OS is a mere 16 files.
+    \expandafter\closeout\csname#2indfile\endcsname
+    \expandafter\let\csname donesynindex#2\endcsname = 1
+  \fi
+  % redefine \fooindfile:
+  \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname
+  \expandafter\let\csname#2indfile\endcsname=\temp
+  % redefine \fooindex:
+  \expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
+}
+
+% Define \doindex, the driver for all \fooindex macros.
+% Argument #1 is generated by the calling \fooindex macro,
+%  and it is "foo", the name of the index.
+
+% \doindex just uses \parsearg; it calls \doind for the actual work.
+% This is because \doind is more useful to call from other macros.
+
+% There is also \dosubind {index}{topic}{subtopic}
+% which makes an entry in a two-level index such as the operation index.
+
+\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
+\def\singleindexer #1{\doind{\indexname}{#1}}
+
+% like the previous two, but they put @code around the argument.
+\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
+\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
+
+% Take care of Texinfo commands that can appear in an index entry.
+% Since there are some commands we want to expand, and others we don't,
+% we have to laboriously prevent expansion for those that we don't.
+%
+\def\indexdummies{%
+  \escapechar = `\\     % use backslash in output files.
+  \def\@{@}% change to @@ when we switch to @ as escape char in index files.
+  \def\ {\realbackslash\space }%
+  %
+  % Need these unexpandable (because we define \tt as a dummy)
+  % definitions when @{ or @} appear in index entry text.  Also, more
+  % complicated, when \tex is in effect and \{ is a \delimiter again.
+  % We can't use \lbracecmd and \rbracecmd because texindex assumes
+  % braces and backslashes are used only as delimiters.  Perhaps we
+  % should define @lbrace and @rbrace commands a la @comma.
+  \def\{{{\tt\char123}}%
+  \def\}{{\tt\char125}}%
+  %
+  % I don't entirely understand this, but when an index entry is
+  % generated from a macro call, the \endinput which \scanmacro inserts
+  % causes processing to be prematurely terminated.  This is,
+  % apparently, because \indexsorttmp is fully expanded, and \endinput
+  % is an expandable command.  The redefinition below makes \endinput
+  % disappear altogether for that purpose -- although logging shows that
+  % processing continues to some further point.  On the other hand, it
+  % seems \endinput does not hurt in the printed index arg, since that
+  % is still getting written without apparent harm.
+  %
+  % Sample source (mac-idx3.tex, reported by Graham Percival to
+  % help-texinfo, 22may06):
+  % @macro funindex {WORD}
+  % @findex xyz
+  % @end macro
+  % ...
+  % @funindex commtest
+  %
+  % The above is not enough to reproduce the bug, but it gives the flavor.
+  %
+  % Sample whatsit resulting:
+  % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}}
+  %
+  % So:
+  \let\endinput = \empty
+  %
+  % Do the redefinitions.
+  \commondummies
+}
+
+% For the aux and toc files, @ is the escape character.  So we want to
+% redefine everything using @ as the escape character (instead of
+% \realbackslash, still used for index files).  When everything uses @,
+% this will be simpler.
+%
+\def\atdummies{%
+  \def\@{@@}%
+  \def\ {@ }%
+  \let\{ = \lbraceatcmd
+  \let\} = \rbraceatcmd
+  %
+  % Do the redefinitions.
+  \commondummies
+  \otherbackslash
+}
+
+% Called from \indexdummies and \atdummies.
+%
+\def\commondummies{%
+  %
+  % \definedummyword defines \#1 as \string\#1\space, thus effectively
+  % preventing its expansion.  This is used only for control words,
+  % not control letters, because the \space would be incorrect for
+  % control characters, but is needed to separate the control word
+  % from whatever follows.
+  %
+  % For control letters, we have \definedummyletter, which omits the
+  % space.
+  %
+  % These can be used both for control words that take an argument and
+  % those that do not.  If it is followed by {arg} in the input, then
+  % that will dutifully get written to the index (or wherever).
+  %
+  \def\definedummyword  ##1{\def##1{\string##1\space}}%
+  \def\definedummyletter##1{\def##1{\string##1}}%
+  \let\definedummyaccent\definedummyletter
+  %
+  \commondummiesnofonts
+  %
+  \definedummyletter\_%
+  \definedummyletter\-%
+  %
+  % Non-English letters.
+  \definedummyword\AA
+  \definedummyword\AE
+  \definedummyword\DH
+  \definedummyword\L
+  \definedummyword\O
+  \definedummyword\OE
+  \definedummyword\TH
+  \definedummyword\aa
+  \definedummyword\ae
+  \definedummyword\dh
+  \definedummyword\exclamdown
+  \definedummyword\l
+  \definedummyword\o
+  \definedummyword\oe
+  \definedummyword\ordf
+  \definedummyword\ordm
+  \definedummyword\questiondown
+  \definedummyword\ss
+  \definedummyword\th
+  %
+  % Although these internal commands shouldn't show up, sometimes they do.
+  \definedummyword\bf
+  \definedummyword\gtr
+  \definedummyword\hat
+  \definedummyword\less
+  \definedummyword\sf
+  \definedummyword\sl
+  \definedummyword\tclose
+  \definedummyword\tt
+  %
+  \definedummyword\LaTeX
+  \definedummyword\TeX
+  %
+  % Assorted special characters.
+  \definedummyword\arrow
+  \definedummyword\bullet
+  \definedummyword\comma
+  \definedummyword\copyright
+  \definedummyword\registeredsymbol
+  \definedummyword\dots
+  \definedummyword\enddots
+  \definedummyword\entrybreak
+  \definedummyword\equiv
+  \definedummyword\error
+  \definedummyword\euro
+  \definedummyword\expansion
+  \definedummyword\geq
+  \definedummyword\guillemetleft
+  \definedummyword\guillemetright
+  \definedummyword\guilsinglleft
+  \definedummyword\guilsinglright
+  \definedummyword\leq
+  \definedummyword\minus
+  \definedummyword\ogonek
+  \definedummyword\pounds
+  \definedummyword\point
+  \definedummyword\print
+  \definedummyword\quotedblbase
+  \definedummyword\quotedblleft
+  \definedummyword\quotedblright
+  \definedummyword\quoteleft
+  \definedummyword\quoteright
+  \definedummyword\quotesinglbase
+  \definedummyword\result
+  \definedummyword\textdegree
+  %
+  % We want to disable all macros so that they are not expanded by \write.
+  \macrolist
+  %
+  \normalturnoffactive
+  %
+  % Handle some cases of @value -- where it does not contain any
+  % (non-fully-expandable) commands.
+  \makevalueexpandable
+}
+
+% \commondummiesnofonts: common to \commondummies and \indexnofonts.
+%
+\def\commondummiesnofonts{%
+  % Control letters and accents.
+  \definedummyletter\!%
+  \definedummyaccent\"%
+  \definedummyaccent\'%
+  \definedummyletter\*%
+  \definedummyaccent\,%
+  \definedummyletter\.%
+  \definedummyletter\/%
+  \definedummyletter\:%
+  \definedummyaccent\=%
+  \definedummyletter\?%
+  \definedummyaccent\^%
+  \definedummyaccent\`%
+  \definedummyaccent\~%
+  \definedummyword\u
+  \definedummyword\v
+  \definedummyword\H
+  \definedummyword\dotaccent
+  \definedummyword\ogonek
+  \definedummyword\ringaccent
+  \definedummyword\tieaccent
+  \definedummyword\ubaraccent
+  \definedummyword\udotaccent
+  \definedummyword\dotless
+  %
+  % Texinfo font commands.
+  \definedummyword\b
+  \definedummyword\i
+  \definedummyword\r
+  \definedummyword\sansserif
+  \definedummyword\sc
+  \definedummyword\slanted
+  \definedummyword\t
+  %
+  % Commands that take arguments.
+  \definedummyword\acronym
+  \definedummyword\cite
+  \definedummyword\code
+  \definedummyword\command
+  \definedummyword\dfn
+  \definedummyword\dmn
+  \definedummyword\email
+  \definedummyword\emph
+  \definedummyword\env
+  \definedummyword\file
+  \definedummyword\indicateurl
+  \definedummyword\kbd
+  \definedummyword\key
+  \definedummyword\math
+  \definedummyword\option
+  \definedummyword\pxref
+  \definedummyword\ref
+  \definedummyword\samp
+  \definedummyword\strong
+  \definedummyword\tie
+  \definedummyword\uref
+  \definedummyword\url
+  \definedummyword\var
+  \definedummyword\verb
+  \definedummyword\w
+  \definedummyword\xref
+}
+
+% \indexnofonts is used when outputting the strings to sort the index
+% by, and when constructing control sequence names.  It eliminates all
+% control sequences and just writes whatever the best ASCII sort string
+% would be for a given command (usually its argument).
+%
+\def\indexnofonts{%
+  % Accent commands should become @asis.
+  \def\definedummyaccent##1{\let##1\asis}%
+  % We can just ignore other control letters.
+  \def\definedummyletter##1{\let##1\empty}%
+  % All control words become @asis by default; overrides below.
+  \let\definedummyword\definedummyaccent
+  %
+  \commondummiesnofonts
+  %
+  % Don't no-op \tt, since it isn't a user-level command
+  % and is used in the definitions of the active chars like <, >, |, etc.
+  % Likewise with the other plain tex font commands.
+  %\let\tt=\asis
+  %
+  \def\ { }%
+  \def\@{@}%
+  \def\_{\normalunderscore}%
+  \def\-{}% @- shouldn't affect sorting
+  %
+  % Unfortunately, texindex is not prepared to handle braces in the
+  % content at all.  So for index sorting, we map @{ and @} to strings
+  % starting with |, since that ASCII character is between ASCII { and }.
+  \def\{{|a}%
+  \def\}{|b}%
+  %
+  % Non-English letters.
+  \def\AA{AA}%
+  \def\AE{AE}%
+  \def\DH{DZZ}%
+  \def\L{L}%
+  \def\OE{OE}%
+  \def\O{O}%
+  \def\TH{ZZZ}%
+  \def\aa{aa}%
+  \def\ae{ae}%
+  \def\dh{dzz}%
+  \def\exclamdown{!}%
+  \def\l{l}%
+  \def\oe{oe}%
+  \def\ordf{a}%
+  \def\ordm{o}%
+  \def\o{o}%
+  \def\questiondown{?}%
+  \def\ss{ss}%
+  \def\th{zzz}%
+  %
+  \def\LaTeX{LaTeX}%
+  \def\TeX{TeX}%
+  %
+  % Assorted special characters.
+  % (The following {} will end up in the sort string, but that's ok.)
+  \def\arrow{->}%
+  \def\bullet{bullet}%
+  \def\comma{,}%
+  \def\copyright{copyright}%
+  \def\dots{...}%
+  \def\enddots{...}%
+  \def\equiv{==}%
+  \def\error{error}%
+  \def\euro{euro}%
+  \def\expansion{==>}%
+  \def\geq{>=}%
+  \def\guillemetleft{<<}%
+  \def\guillemetright{>>}%
+  \def\guilsinglleft{<}%
+  \def\guilsinglright{>}%
+  \def\leq{<=}%
+  \def\minus{-}%
+  \def\point{.}%
+  \def\pounds{pounds}%
+  \def\print{-|}%
+  \def\quotedblbase{"}%
+  \def\quotedblleft{"}%
+  \def\quotedblright{"}%
+  \def\quoteleft{`}%
+  \def\quoteright{'}%
+  \def\quotesinglbase{,}%
+  \def\registeredsymbol{R}%
+  \def\result{=>}%
+  \def\textdegree{o}%
+  %
+  \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax
+  \else \indexlquoteignore \fi
+  %
+  % We need to get rid of all macros, leaving only the arguments (if present).
+  % Of course this is not nearly correct, but it is the best we can do for now.
+  % makeinfo does not expand macros in the argument to @deffn, which ends up
+  % writing an index entry, and texindex isn't prepared for an index sort entry
+  % that starts with \.
+  %
+  % Since macro invocations are followed by braces, we can just redefine them
+  % to take a single TeX argument.  The case of a macro invocation that
+  % goes to end-of-line is not handled.
+  %
+  \macrolist
+}
+
+% Undocumented (for FSFS 2nd ed.): @set txiindexlquoteignore makes us
+% ignore left quotes in the sort term.
+{\catcode`\`=\active
+ \gdef\indexlquoteignore{\let`=\empty}}
+
+\let\indexbackslash=0  %overridden during \printindex.
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
+
+% Most index entries go through here, but \dosubind is the general case.
+% #1 is the index name, #2 is the entry text.
+\def\doind#1#2{\dosubind{#1}{#2}{}}
+
+% Workhorse for all \fooindexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% empty if called from \doind, as we usually are (the main exception
+% is with most defuns, which call us directly).
+%
+\def\dosubind#1#2#3{%
+  \iflinks
+  {%
+    % Store the main index entry text (including the third arg).
+    \toks0 = {#2}%
+    % If third arg is present, precede it with a space.
+    \def\thirdarg{#3}%
+    \ifx\thirdarg\empty \else
+      \toks0 = \expandafter{\the\toks0 \space #3}%
+    \fi
+    %
+    \edef\writeto{\csname#1indfile\endcsname}%
+    %
+    \safewhatsit\dosubindwrite
+  }%
+  \fi
+}
+
+% Write the entry in \toks0 to the index file:
+%
+\def\dosubindwrite{%
+  % Put the index entry in the margin if desired.
+  \ifx\SETmarginindex\relax\else
+    \insert\margin{\hbox{\vrule height8pt depth3pt width0pt \the\toks0}}%
+  \fi
+  %
+  % Remember, we are within a group.
+  \indexdummies % Must do this here, since \bf, etc expand at this stage
+  \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
+      % so it will be output as is; and it will print as backslash.
+  %
+  % Process the index entry with all font commands turned off, to
+  % get the string to sort by.
+  {\indexnofonts
+   \edef\temp{\the\toks0}% need full expansion
+   \xdef\indexsorttmp{\temp}%
+  }%
+  %
+  % Set up the complete index entry, with both the sort key and
+  % the original text, including any font commands.  We write
+  % three arguments to \entry to the .?? file (four in the
+  % subentry case), texindex reduces to two when writing the .??s
+  % sorted result.
+  \edef\temp{%
+    \write\writeto{%
+      \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
+  }%
+  \temp
+}
+
+% Take care of unwanted page breaks/skips around a whatsit:
+%
+% If a skip is the last thing on the list now, preserve it
+% by backing up by \lastskip, doing the \write, then inserting
+% the skip again.  Otherwise, the whatsit generated by the
+% \write or \pdfdest will make \lastskip zero.  The result is that
+% sequences like this:
+% @end defun
+% @tindex whatever
+% @defun ...
+% will have extra space inserted, because the \medbreak in the
+% start of the @defun won't see the skip inserted by the @end of
+% the previous defun.
+%
+% But don't do any of this if we're not in vertical mode.  We
+% don't want to do a \vskip and prematurely end a paragraph.
+%
+% Avoid page breaks due to these extra skips, too.
+%
+% But wait, there is a catch there:
+% We'll have to check whether \lastskip is zero skip.  \ifdim is not
+% sufficient for this purpose, as it ignores stretch and shrink parts
+% of the skip.  The only way seems to be to check the textual
+% representation of the skip.
+%
+% The following is almost like \def\zeroskipmacro{0.0pt} except that
+% the ``p'' and ``t'' characters have catcode \other, not 11 (letter).
+%
+\edef\zeroskipmacro{\expandafter\the\csname z@skip\endcsname}
+%
+\newskip\whatsitskip
+\newcount\whatsitpenalty
+%
+% ..., ready, GO:
+%
+\def\safewhatsit#1{%
+\ifhmode
+  #1%
+\else
+  % \lastskip and \lastpenalty cannot both be nonzero simultaneously.
+  \whatsitskip = \lastskip
+  \edef\lastskipmacro{\the\lastskip}%
+  \whatsitpenalty = \lastpenalty
+  %
+  % If \lastskip is nonzero, that means the last item was a
+  % skip.  And since a skip is discardable, that means this
+  % -\whatsitskip glue we're inserting is preceded by a
+  % non-discardable item, therefore it is not a potential
+  % breakpoint, therefore no \nobreak needed.
+  \ifx\lastskipmacro\zeroskipmacro
+  \else
+    \vskip-\whatsitskip
+  \fi
+  %
+  #1%
+  %
+  \ifx\lastskipmacro\zeroskipmacro
+    % If \lastskip was zero, perhaps the last item was a penalty, and
+    % perhaps it was >=10000, e.g., a \nobreak.  In that case, we want
+    % to re-insert the same penalty (values >10000 are used for various
+    % signals); since we just inserted a non-discardable item, any
+    % following glue (such as a \parskip) would be a breakpoint.  For example:
+    %
+    %   @deffn deffn-whatever
+    %   @vindex index-whatever
+    %   Description.
+    % would allow a break between the index-whatever whatsit
+    % and the "Description." paragraph.
+    \ifnum\whatsitpenalty>9999 \penalty\whatsitpenalty \fi
+  \else
+    % On the other hand, if we had a nonzero \lastskip,
+    % this make-up glue would be preceded by a non-discardable item
+    % (the whatsit from the \write), so we must insert a \nobreak.
+    \nobreak\vskip\whatsitskip
+  \fi
+\fi
+}
+
+% The index entry written in the file actually looks like
+%  \entry {sortstring}{page}{topic}
+% or
+%  \entry {sortstring}{page}{topic}{subtopic}
+% The texindex program reads in these files and writes files
+% containing these kinds of lines:
+%  \initial {c}
+%     before the first topic whose initial is c
+%  \entry {topic}{pagelist}
+%     for a topic that is used without subtopics
+%  \primary {topic}
+%     for the beginning of a topic that is used with subtopics
+%  \secondary {subtopic}{pagelist}
+%     for each subtopic.
+
+% Define the user-accessible indexing commands
+% @findex, @vindex, @kindex, @cindex.
+
+\def\findex {\fnindex}
+\def\kindex {\kyindex}
+\def\cindex {\cpindex}
+\def\vindex {\vrindex}
+\def\tindex {\tpindex}
+\def\pindex {\pgindex}
+
+\def\cindexsub {\begingroup\obeylines\cindexsub}
+{\obeylines %
+\gdef\cindexsub "#1" #2^^M{\endgroup %
+\dosubind{cp}{#2}{#1}}}
+
+% Define the macros used in formatting output of the sorted index material.
+
+% @printindex causes a particular index (the ??s file) to get printed.
+% It does not print any chapter heading (usually an @unnumbered).
+%
+\parseargdef\printindex{\begingroup
+  \dobreak \chapheadingskip{10000}%
+  %
+  \smallfonts \rm
+  \tolerance = 9500
+  \plainfrenchspacing
+  \everypar = {}% don't want the \kern\-parindent from indentation suppression.
+  %
+  % See if the index file exists and is nonempty.
+  % Change catcode of @ here so that if the index file contains
+  % \initial {@}
+  % as its first line, TeX doesn't complain about mismatched braces
+  % (because it thinks @} is a control sequence).
+  \catcode`\@ = 11
+  \openin 1 \jobname.#1s
+  \ifeof 1
+    % \enddoublecolumns gets confused if there is no text in the index,
+    % and it loses the chapter title and the aux file entries for the
+    % index.  The easiest way to prevent this problem is to make sure
+    % there is some text.
+    \putwordIndexNonexistent
+  \else
+    %
+    % If the index file exists but is empty, then \openin leaves \ifeof
+    % false.  We have to make TeX try to read something from the file, so
+    % it can discover if there is anything in it.
+    \read 1 to \temp
+    \ifeof 1
+      \putwordIndexIsEmpty
+    \else
+      % Index files are almost Texinfo source, but we use \ as the escape
+      % character.  It would be better to use @, but that's too big a change
+      % to make right now.
+      \def\indexbackslash{\backslashcurfont}%
+      \catcode`\\ = 0
+      \escapechar = `\\
+      \begindoublecolumns
+      \input \jobname.#1s
+      \enddoublecolumns
+    \fi
+  \fi
+  \closein 1
+\endgroup}
+
+% These macros are used by the sorted index file itself.
+% Change them to control the appearance of the index.
+
+\def\initial#1{{%
+  % Some minor font changes for the special characters.
+  \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
+  %
+  % Remove any glue we may have, we'll be inserting our own.
+  \removelastskip
+  %
+  % We like breaks before the index initials, so insert a bonus.
+  \nobreak
+  \vskip 0pt plus 3\baselineskip
+  \penalty 0
+  \vskip 0pt plus -3\baselineskip
+  %
+  % Typeset the initial.  Making this add up to a whole number of
+  % baselineskips increases the chance of the dots lining up from column
+  % to column.  It still won't often be perfect, because of the stretch
+  % we need before each entry, but it's better.
+  %
+  % No shrink because it confuses \balancecolumns.
+  \vskip 1.67\baselineskip plus .5\baselineskip
+  \leftline{\secbf #1}%
+  % Do our best not to break after the initial.
+  \nobreak
+  \vskip .33\baselineskip plus .1\baselineskip
+}}
+
+% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
+% then page number (#2) flushed to the right margin.  It is used for index
+% and table of contents entries.  The paragraph is indented by \leftskip.
+%
+% A straightforward implementation would start like this:
+%	\def\entry#1#2{...
+% But this freezes the catcodes in the argument, and can cause problems to
+% @code, which sets - active.  This problem was fixed by a kludge---
+% ``-'' was active throughout whole index, but this isn't really right.
+% The right solution is to prevent \entry from swallowing the whole text.
+%                                 --kasal, 21nov03
+\def\entry{%
+  \begingroup
+    %
+    % Start a new paragraph if necessary, so our assignments below can't
+    % affect previous text.
+    \par
+    %
+    % Do not fill out the last line with white space.
+    \parfillskip = 0in
+    %
+    % No extra space above this paragraph.
+    \parskip = 0in
+    %
+    % Do not prefer a separate line ending with a hyphen to fewer lines.
+    \finalhyphendemerits = 0
+    %
+    % \hangindent is only relevant when the entry text and page number
+    % don't both fit on one line.  In that case, bob suggests starting the
+    % dots pretty far over on the line.  Unfortunately, a large
+    % indentation looks wrong when the entry text itself is broken across
+    % lines.  So we use a small indentation and put up with long leaders.
+    %
+    % \hangafter is reset to 1 (which is the value we want) at the start
+    % of each paragraph, so we need not do anything with that.
+    \hangindent = 2em
+    %
+    % When the entry text needs to be broken, just fill out the first line
+    % with blank space.
+    \rightskip = 0pt plus1fil
+    %
+    % A bit of stretch before each entry for the benefit of balancing
+    % columns.
+    \vskip 0pt plus1pt
+    %
+    % When reading the text of entry, convert explicit line breaks
+    % from @* into spaces.  The user might give these in long section
+    % titles, for instance.
+    \def\*{\unskip\space\ignorespaces}%
+    \def\entrybreak{\hfil\break}%
+    %
+    % Swallow the left brace of the text (first parameter):
+    \afterassignment\doentry
+    \let\temp =
+}
+\def\entrybreak{\unskip\space\ignorespaces}%
+\def\doentry{%
+    \bgroup % Instead of the swallowed brace.
+      \noindent
+      \aftergroup\finishentry
+      % And now comes the text of the entry.
+}
+\def\finishentry#1{%
+    % #1 is the page number.
+    %
+    % The following is kludged to not output a line of dots in the index if
+    % there are no page numbers.  The next person who breaks this will be
+    % cursed by a Unix daemon.
+    \setbox\boxA = \hbox{#1}%
+    \ifdim\wd\boxA = 0pt
+      \ %
+    \else
+      %
+      % If we must, put the page number on a line of its own, and fill out
+      % this line with blank space.  (The \hfil is overwhelmed with the
+      % fill leaders glue in \indexdotfill if the page number does fit.)
+      \hfil\penalty50
+      \null\nobreak\indexdotfill % Have leaders before the page number.
+      %
+      % The `\ ' here is removed by the implicit \unskip that TeX does as
+      % part of (the primitive) \par.  Without it, a spurious underfull
+      % \hbox ensues.
+      \ifpdf
+	\pdfgettoks#1.%
+	\ \the\toksA
+      \else
+	\ #1%
+      \fi
+    \fi
+    \par
+  \endgroup
+}
+
+% Like plain.tex's \dotfill, except uses up at least 1 em.
+\def\indexdotfill{\cleaders
+  \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
+
+\def\primary #1{\line{#1\hfil}}
+
+\newskip\secondaryindent \secondaryindent=0.5cm
+\def\secondary#1#2{{%
+  \parfillskip=0in
+  \parskip=0in
+  \hangindent=1in
+  \hangafter=1
+  \noindent\hskip\secondaryindent\hbox{#1}\indexdotfill
+  \ifpdf
+    \pdfgettoks#2.\ \the\toksA % The page number ends the paragraph.
+  \else
+    #2
+  \fi
+  \par
+}}
+
+% Define two-column mode, which we use to typeset indexes.
+% Adapted from the TeXbook, page 416, which is to say,
+% the manmac.tex format used to print the TeXbook itself.
+\catcode`\@=11
+
+\newbox\partialpage
+\newdimen\doublecolumnhsize
+
+\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
+  % Grab any single-column material above us.
+  \output = {%
+    %
+    % Here is a possibility not foreseen in manmac: if we accumulate a
+    % whole lot of material, we might end up calling this \output
+    % routine twice in a row (see the doublecol-lose test, which is
+    % essentially a couple of indexes with @setchapternewpage off).  In
+    % that case we just ship out what is in \partialpage with the normal
+    % output routine.  Generally, \partialpage will be empty when this
+    % runs and this will be a no-op.  See the indexspread.tex test case.
+    \ifvoid\partialpage \else
+      \onepageout{\pagecontents\partialpage}%
+    \fi
+    %
+    \global\setbox\partialpage = \vbox{%
+      % Unvbox the main output page.
+      \unvbox\PAGE
+      \kern-\topskip \kern\baselineskip
+    }%
+  }%
+  \eject % run that output routine to set \partialpage
+  %
+  % Use the double-column output routine for subsequent pages.
+  \output = {\doublecolumnout}%
+  %
+  % Change the page size parameters.  We could do this once outside this
+  % routine, in each of @smallbook, @afourpaper, and the default 8.5x11
+  % format, but then we repeat the same computation.  Repeating a couple
+  % of assignments once per index is clearly meaningless for the
+  % execution time, so we may as well do it in one place.
+  %
+  % First we halve the line length, less a little for the gutter between
+  % the columns.  We compute the gutter based on the line length, so it
+  % changes automatically with the paper format.  The magic constant
+  % below is chosen so that the gutter has the same value (well, +-<1pt)
+  % as it did when we hard-coded it.
+  %
+  % We put the result in a separate register, \doublecolumhsize, so we
+  % can restore it in \pagesofar, after \hsize itself has (potentially)
+  % been clobbered.
+  %
+  \doublecolumnhsize = \hsize
+    \advance\doublecolumnhsize by -.04154\hsize
+    \divide\doublecolumnhsize by 2
+  \hsize = \doublecolumnhsize
+  %
+  % Double the \vsize as well.  (We don't need a separate register here,
+  % since nobody clobbers \vsize.)
+  \vsize = 2\vsize
+}
+
+% The double-column output routine for all double-column pages except
+% the last.
+%
+\def\doublecolumnout{%
+  \splittopskip=\topskip \splitmaxdepth=\maxdepth
+  % Get the available space for the double columns -- the normal
+  % (undoubled) page height minus any material left over from the
+  % previous page.
+  \dimen@ = \vsize
+  \divide\dimen@ by 2
+  \advance\dimen@ by -\ht\partialpage
+  %
+  % box0 will be the left-hand column, box2 the right.
+  \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+  \onepageout\pagesofar
+  \unvbox255
+  \penalty\outputpenalty
+}
+%
+% Re-output the contents of the output page -- any previous material,
+% followed by the two boxes we just split, in box0 and box2.
+\def\pagesofar{%
+  \unvbox\partialpage
+  %
+  \hsize = \doublecolumnhsize
+  \wd0=\hsize \wd2=\hsize
+  \hbox to\pagewidth{\box0\hfil\box2}%
+}
+%
+% All done with double columns.
+\def\enddoublecolumns{%
+  % The following penalty ensures that the page builder is exercised
+  % _before_ we change the output routine.  This is necessary in the
+  % following situation:
+  %
+  % The last section of the index consists only of a single entry.
+  % Before this section, \pagetotal is less than \pagegoal, so no
+  % break occurs before the last section starts.  However, the last
+  % section, consisting of \initial and the single \entry, does not
+  % fit on the page and has to be broken off.  Without the following
+  % penalty the page builder will not be exercised until \eject
+  % below, and by that time we'll already have changed the output
+  % routine to the \balancecolumns version, so the next-to-last
+  % double-column page will be processed with \balancecolumns, which
+  % is wrong:  The two columns will go to the main vertical list, with
+  % the broken-off section in the recent contributions.  As soon as
+  % the output routine finishes, TeX starts reconsidering the page
+  % break.  The two columns and the broken-off section both fit on the
+  % page, because the two columns now take up only half of the page
+  % goal.  When TeX sees \eject from below which follows the final
+  % section, it invokes the new output routine that we've set after
+  % \balancecolumns below; \onepageout will try to fit the two columns
+  % and the final section into the vbox of \pageheight (see
+  % \pagebody), causing an overfull box.
+  %
+  % Note that glue won't work here, because glue does not exercise the
+  % page builder, unlike penalties (see The TeXbook, pp. 280-281).
+  \penalty0
+  %
+  \output = {%
+    % Split the last of the double-column material.  Leave it on the
+    % current page, no automatic page break.
+    \balancecolumns
+    %
+    % If we end up splitting too much material for the current page,
+    % though, there will be another page break right after this \output
+    % invocation ends.  Having called \balancecolumns once, we do not
+    % want to call it again.  Therefore, reset \output to its normal
+    % definition right away.  (We hope \balancecolumns will never be
+    % called on to balance too much material, but if it is, this makes
+    % the output somewhat more palatable.)
+    \global\output = {\onepageout{\pagecontents\PAGE}}%
+  }%
+  \eject
+  \endgroup % started in \begindoublecolumns
+  %
+  % \pagegoal was set to the doubled \vsize above, since we restarted
+  % the current page.  We're now back to normal single-column
+  % typesetting, so reset \pagegoal to the normal \vsize (after the
+  % \endgroup where \vsize got restored).
+  \pagegoal = \vsize
+}
+%
+% Called at the end of the double column material.
+\def\balancecolumns{%
+  \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+  \dimen@ = \ht0
+  \advance\dimen@ by \topskip
+  \advance\dimen@ by-\baselineskip
+  \divide\dimen@ by 2 % target to split to
+  %debug\message{final 2-column material height=\the\ht0, target=\the\dimen@.}%
+  \splittopskip = \topskip
+  % Loop until we get a decent breakpoint.
+  {%
+    \vbadness = 10000
+    \loop
+      \global\setbox3 = \copy0
+      \global\setbox1 = \vsplit3 to \dimen@
+    \ifdim\ht3>\dimen@
+      \global\advance\dimen@ by 1pt
+    \repeat
+  }%
+  %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
+  \setbox0=\vbox to\dimen@{\unvbox1}%
+  \setbox2=\vbox to\dimen@{\unvbox3}%
+  %
+  \pagesofar
+}
+\catcode`\@ = \other
+
+
+\message{sectioning,}
+% Chapters, sections, etc.
+
+% Let's start with @part.
+\outer\parseargdef\part{\partzzz{#1}}
+\def\partzzz#1{%
+  \chapoddpage
+  \null
+  \vskip.3\vsize  % move it down on the page a bit
+  \begingroup
+    \noindent \titlefonts\rmisbold #1\par % the text
+    \let\lastnode=\empty      % no node to associate with
+    \writetocentry{part}{#1}{}% but put it in the toc
+    \headingsoff              % no headline or footline on the part page
+    \chapoddpage
+  \endgroup
+}
+
+% \unnumberedno is an oxymoron.  But we count the unnumbered
+% sections so that we can refer to them unambiguously in the pdf
+% outlines by their "section number".  We avoid collisions with chapter
+% numbers by starting them at 10000.  (If a document ever has 10000
+% chapters, we're in trouble anyway, I'm sure.)
+\newcount\unnumberedno \unnumberedno = 10000
+\newcount\chapno
+\newcount\secno        \secno=0
+\newcount\subsecno     \subsecno=0
+\newcount\subsubsecno  \subsubsecno=0
+
+% This counter is funny since it counts through charcodes of letters A, B, ...
+\newcount\appendixno  \appendixno = `\@
+%
+% \def\appendixletter{\char\the\appendixno}
+% We do the following ugly conditional instead of the above simple
+% construct for the sake of pdftex, which needs the actual
+% letter in the expansion, not just typeset.
+%
+\def\appendixletter{%
+  \ifnum\appendixno=`A A%
+  \else\ifnum\appendixno=`B B%
+  \else\ifnum\appendixno=`C C%
+  \else\ifnum\appendixno=`D D%
+  \else\ifnum\appendixno=`E E%
+  \else\ifnum\appendixno=`F F%
+  \else\ifnum\appendixno=`G G%
+  \else\ifnum\appendixno=`H H%
+  \else\ifnum\appendixno=`I I%
+  \else\ifnum\appendixno=`J J%
+  \else\ifnum\appendixno=`K K%
+  \else\ifnum\appendixno=`L L%
+  \else\ifnum\appendixno=`M M%
+  \else\ifnum\appendixno=`N N%
+  \else\ifnum\appendixno=`O O%
+  \else\ifnum\appendixno=`P P%
+  \else\ifnum\appendixno=`Q Q%
+  \else\ifnum\appendixno=`R R%
+  \else\ifnum\appendixno=`S S%
+  \else\ifnum\appendixno=`T T%
+  \else\ifnum\appendixno=`U U%
+  \else\ifnum\appendixno=`V V%
+  \else\ifnum\appendixno=`W W%
+  \else\ifnum\appendixno=`X X%
+  \else\ifnum\appendixno=`Y Y%
+  \else\ifnum\appendixno=`Z Z%
+  % The \the is necessary, despite appearances, because \appendixletter is
+  % expanded while writing the .toc file.  \char\appendixno is not
+  % expandable, thus it is written literally, thus all appendixes come out
+  % with the same letter (or @) in the toc without it.
+  \else\char\the\appendixno
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi
+  \fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi\fi}
+
+% Each @chapter defines these (using marks) as the number+name, number
+% and name of the chapter.  Page headings and footings can use
+% these.  @section does likewise.
+\def\thischapter{}
+\def\thischapternum{}
+\def\thischaptername{}
+\def\thissection{}
+\def\thissectionnum{}
+\def\thissectionname{}
+
+\newcount\absseclevel % used to calculate proper heading level
+\newcount\secbase\secbase=0 % @raisesections/@lowersections modify this count
+
+% @raisesections: treat @section as chapter, @subsection as section, etc.
+\def\raisesections{\global\advance\secbase by -1}
+\let\up=\raisesections % original BFox name
+
+% @lowersections: treat @chapter as section, @section as subsection, etc.
+\def\lowersections{\global\advance\secbase by 1}
+\let\down=\lowersections % original BFox name
+
+% we only have subsub.
+\chardef\maxseclevel = 3
+%
+% A numbered section within an unnumbered changes to unnumbered too.
+% To achieve this, remember the "biggest" unnum. sec. we are currently in:
+\chardef\unnlevel = \maxseclevel
+%
+% Trace whether the current chapter is an appendix or not:
+% \chapheadtype is "N" or "A", unnumbered chapters are ignored.
+\def\chapheadtype{N}
+
+% Choose a heading macro
+% #1 is heading type
+% #2 is heading level
+% #3 is text for heading
+\def\genhead#1#2#3{%
+  % Compute the abs. sec. level:
+  \absseclevel=#2
+  \advance\absseclevel by \secbase
+  % Make sure \absseclevel doesn't fall outside the range:
+  \ifnum \absseclevel < 0
+    \absseclevel = 0
+  \else
+    \ifnum \absseclevel > 3
+      \absseclevel = 3
+    \fi
+  \fi
+  % The heading type:
+  \def\headtype{#1}%
+  \if \headtype U%
+    \ifnum \absseclevel < \unnlevel
+      \chardef\unnlevel = \absseclevel
+    \fi
+  \else
+    % Check for appendix sections:
+    \ifnum \absseclevel = 0
+      \edef\chapheadtype{\headtype}%
+    \else
+      \if \headtype A\if \chapheadtype N%
+	\errmessage{@appendix... within a non-appendix chapter}%
+      \fi\fi
+    \fi
+    % Check for numbered within unnumbered:
+    \ifnum \absseclevel > \unnlevel
+      \def\headtype{U}%
+    \else
+      \chardef\unnlevel = 3
+    \fi
+  \fi
+  % Now print the heading:
+  \if \headtype U%
+    \ifcase\absseclevel
+	\unnumberedzzz{#3}%
+    \or \unnumberedseczzz{#3}%
+    \or \unnumberedsubseczzz{#3}%
+    \or \unnumberedsubsubseczzz{#3}%
+    \fi
+  \else
+    \if \headtype A%
+      \ifcase\absseclevel
+	  \appendixzzz{#3}%
+      \or \appendixsectionzzz{#3}%
+      \or \appendixsubseczzz{#3}%
+      \or \appendixsubsubseczzz{#3}%
+      \fi
+    \else
+      \ifcase\absseclevel
+	  \chapterzzz{#3}%
+      \or \seczzz{#3}%
+      \or \numberedsubseczzz{#3}%
+      \or \numberedsubsubseczzz{#3}%
+      \fi
+    \fi
+  \fi
+  \suppressfirstparagraphindent
+}
+
+% an interface:
+\def\numhead{\genhead N}
+\def\apphead{\genhead A}
+\def\unnmhead{\genhead U}
+
+% @chapter, @appendix, @unnumbered.  Increment top-level counter, reset
+% all lower-level sectioning counters to zero.
+%
+% Also set \chaplevelprefix, which we prepend to @float sequence numbers
+% (e.g., figures), q.v.  By default (before any chapter), that is empty.
+\let\chaplevelprefix = \empty
+%
+\outer\parseargdef\chapter{\numhead0{#1}} % normally numhead0 calls chapterzzz
+\def\chapterzzz#1{%
+  % section resetting is \global in case the chapter is in a group, such
+  % as an @include file.
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\chapno by 1
+  %
+  % Used for \float.
+  \gdef\chaplevelprefix{\the\chapno.}%
+  \resetallfloatnos
+  %
+  % \putwordChapter can contain complex things in translations.
+  \toks0=\expandafter{\putwordChapter}%
+  \message{\the\toks0 \space \the\chapno}%
+  %
+  % Write the actual heading.
+  \chapmacro{#1}{Ynumbered}{\the\chapno}%
+  %
+  % So @section and the like are numbered underneath this chapter.
+  \global\let\section = \numberedsec
+  \global\let\subsection = \numberedsubsec
+  \global\let\subsubsection = \numberedsubsubsec
+}
+
+\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz
+%
+\def\appendixzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\appendixno by 1
+  \gdef\chaplevelprefix{\appendixletter.}%
+  \resetallfloatnos
+  %
+  % \putwordAppendix can contain complex things in translations.
+  \toks0=\expandafter{\putwordAppendix}%
+  \message{\the\toks0 \space \appendixletter}%
+  %
+  \chapmacro{#1}{Yappendix}{\appendixletter}%
+  %
+  \global\let\section = \appendixsec
+  \global\let\subsection = \appendixsubsec
+  \global\let\subsubsection = \appendixsubsubsec
+}
+
+% normally unnmhead0 calls unnumberedzzz:
+\outer\parseargdef\unnumbered{\unnmhead0{#1}}
+\def\unnumberedzzz#1{%
+  \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
+    \global\advance\unnumberedno by 1
+  %
+  % Since an unnumbered has no number, no prefix for figures.
+  \global\let\chaplevelprefix = \empty
+  \resetallfloatnos
+  %
+  % This used to be simply \message{#1}, but TeX fully expands the
+  % argument to \message.  Therefore, if #1 contained @-commands, TeX
+  % expanded them.  For example, in `@unnumbered The @cite{Book}', TeX
+  % expanded @cite (which turns out to cause errors because \cite is meant
+  % to be executed, not expanded).
+  %
+  % Anyway, we don't want the fully-expanded definition of @cite to appear
+  % as a result of the \message, we just want `@cite' itself.  We use
+  % \the<toks register> to achieve this: TeX expands \the<toks> only once,
+  % simply yielding the contents of <toks register>.  (We also do this for
+  % the toc entries.)
+  \toks0 = {#1}%
+  \message{(\the\toks0)}%
+  %
+  \chapmacro{#1}{Ynothing}{\the\unnumberedno}%
+  %
+  \global\let\section = \unnumberedsec
+  \global\let\subsection = \unnumberedsubsec
+  \global\let\subsubsection = \unnumberedsubsubsec
+}
+
+% @centerchap is like @unnumbered, but the heading is centered.
+\outer\parseargdef\centerchap{%
+  % Well, we could do the following in a group, but that would break
+  % an assumption that \chapmacro is called at the outermost level.
+  % Thus we are safer this way:		--kasal, 24feb04
+  \let\centerparametersmaybe = \centerparameters
+  \unnmhead0{#1}%
+  \let\centerparametersmaybe = \relax
+}
+
+% @top is like @unnumbered.
+\let\top\unnumbered
+
+% Sections.
+% 
+\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
+\def\seczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}%
+}
+
+% normally calls appendixsectionzzz:
+\outer\parseargdef\appendixsection{\apphead1{#1}}
+\def\appendixsectionzzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}%
+}
+\let\appendixsec\appendixsection
+
+% normally calls unnumberedseczzz:
+\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
+\def\unnumberedseczzz#1{%
+  \global\subsecno=0 \global\subsubsecno=0  \global\advance\secno by 1
+  \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+}
+
+% Subsections.
+% 
+% normally calls numberedsubseczzz:
+\outer\parseargdef\numberedsubsec{\numhead2{#1}}
+\def\numberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}%
+}
+
+% normally calls appendixsubseczzz:
+\outer\parseargdef\appendixsubsec{\apphead2{#1}}
+\def\appendixsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno}%
+}
+
+% normally calls unnumberedsubseczzz:
+\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
+\def\unnumberedsubseczzz#1{%
+  \global\subsubsecno=0  \global\advance\subsecno by 1
+  \sectionheading{#1}{subsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno}%
+}
+
+% Subsubsections.
+% 
+% normally numberedsubsubseczzz:
+\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
+\def\numberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynumbered}%
+                 {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally appendixsubsubseczzz:
+\outer\parseargdef\appendixsubsubsec{\apphead3{#1}}
+\def\appendixsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Yappendix}%
+                 {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% normally unnumberedsubsubseczzz:
+\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
+\def\unnumberedsubsubseczzz#1{%
+  \global\advance\subsubsecno by 1
+  \sectionheading{#1}{subsubsec}{Ynothing}%
+                 {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+}
+
+% These macros control what the section commands do, according
+% to what kind of chapter we are in (ordinary, appendix, or unnumbered).
+% Define them by default for a numbered chapter.
+\let\section = \numberedsec
+\let\subsection = \numberedsubsec
+\let\subsubsection = \numberedsubsubsec
+
+% Define @majorheading, @heading and @subheading
+
+% NOTE on use of \vbox for chapter headings, section headings, and such:
+%       1) We use \vbox rather than the earlier \line to permit
+%          overlong headings to fold.
+%       2) \hyphenpenalty is set to 10000 because hyphenation in a
+%          heading is obnoxious; this forbids it.
+%       3) Likewise, headings look best if no \parindent is used, and
+%          if justification is not attempted.  Hence \raggedright.
+
+\def\majorheading{%
+  {\advance\chapheadingskip by 10pt \chapbreak }%
+  \parsearg\chapheadingzzz
+}
+
+\def\chapheading{\chapbreak \parsearg\chapheadingzzz}
+\def\chapheadingzzz#1{%
+  {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+                    \parindent=0pt\ptexraggedright
+                    \rmisbold #1\hfill}}%
+  \bigskip \par\penalty 200\relax
+  \suppressfirstparagraphindent
+}
+
+% @heading, @subheading, @subsubheading.
+\parseargdef\heading{\sectionheading{#1}{sec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subheading{\sectionheading{#1}{subsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+\parseargdef\subsubheading{\sectionheading{#1}{subsubsec}{Yomitfromtoc}{}
+  \suppressfirstparagraphindent}
+
+% These macros generate a chapter, section, etc. heading only
+% (including whitespace, linebreaking, etc. around it),
+% given all the information in convenient, parsed form.
+
+% Args are the skip and penalty (usually negative)
+\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi}
+
+% Parameter controlling skip before chapter headings (if needed)
+\newskip\chapheadingskip
+
+% Define plain chapter starts, and page on/off switching for it.
+\def\chapbreak{\dobreak \chapheadingskip {-4000}}
+\def\chappager{\par\vfill\supereject}
+% Because \domark is called before \chapoddpage, the filler page will
+% get the headings for the next chapter, which is wrong.  But we don't
+% care -- we just disable all headings on the filler page.
+\def\chapoddpage{%
+  \chappager
+  \ifodd\pageno \else
+    \begingroup
+      \headingsoff
+      \null
+      \chappager
+    \endgroup
+  \fi
+}
+
+\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname}
+
+\def\CHAPPAGoff{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chapbreak
+\global\let\pagealignmacro=\chappager}
+
+\def\CHAPPAGon{%
+\global\let\contentsalignmacro = \chappager
+\global\let\pchapsepmacro=\chappager
+\global\let\pagealignmacro=\chappager
+\global\def\HEADINGSon{\HEADINGSsingle}}
+
+\def\CHAPPAGodd{%
+\global\let\contentsalignmacro = \chapoddpage
+\global\let\pchapsepmacro=\chapoddpage
+\global\let\pagealignmacro=\chapoddpage
+\global\def\HEADINGSon{\HEADINGSdouble}}
+
+\CHAPPAGon
+
+% Chapter opening.
+%
+% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
+% Yappendix, Yomitfromtoc), #3 the chapter number.
+%
+% To test against our argument.
+\def\Ynothingkeyword{Ynothing}
+\def\Yomitfromtockeyword{Yomitfromtoc}
+\def\Yappendixkeyword{Yappendix}
+%
+\def\chapmacro#1#2#3{%
+  % Insert the first mark before the heading break (see notes for \domark).
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \gdef\lastsectiondefs{\gdef\thissectionname{}\gdef\thissectionnum{}%
+                        \gdef\thissection{}}%
+  %
+  \def\temptype{#2}%
+  \ifx\temptype\Ynothingkeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{\thischaptername}}%
+  \else\ifx\temptype\Yomitfromtockeyword
+    \gdef\lastchapterdefs{\gdef\thischaptername{#1}\gdef\thischapternum{}%
+                          \gdef\thischapter{}}%
+  \else\ifx\temptype\Yappendixkeyword
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\appendixletter}%
+      % \noexpand\putwordAppendix avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordAppendix{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \else
+    \toks0={#1}%
+    \xdef\lastchapterdefs{%
+      \gdef\noexpand\thischaptername{\the\toks0}%
+      \gdef\noexpand\thischapternum{\the\chapno}%
+      % \noexpand\putwordChapter avoids expanding indigestible
+      % commands in some of the translations.
+      \gdef\noexpand\thischapter{\noexpand\putwordChapter{}
+                                 \noexpand\thischapternum:
+                                 \noexpand\thischaptername}%
+    }%
+  \fi\fi\fi
+  %
+  % Output the mark.  Pass it through \safewhatsit, to take care of
+  % the preceding space.
+  \safewhatsit\domark
+  %
+  % Insert the chapter heading break.
+  \pchapsepmacro
+  %
+  % Now the second mark, after the heading break.  No break points
+  % between here and the heading.
+  \let\prevchapterdefs=\lastchapterdefs
+  \let\prevsectiondefs=\lastsectiondefs
+  \domark
+  %
+  {%
+    \chapfonts \rmisbold
+    %
+    % Have to define \lastsection before calling \donoderef, because the
+    % xref code eventually uses it.  On the other hand, it has to be called
+    % after \pchapsepmacro, or the headline will change too soon.
+    \gdef\lastsection{#1}%
+    %
+    % Only insert the separating space if we have a chapter/appendix
+    % number, and don't print the unnumbered ``number''.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unnchap}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      \setbox0 = \hbox{}% contents like unnumbered, but no toc entry
+      \def\toctype{omit}%
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{\putwordAppendix{} #3\enspace}%
+      \def\toctype{app}%
+    \else
+      \setbox0 = \hbox{#3\enspace}%
+      \def\toctype{numchap}%
+    \fi\fi\fi
+    %
+    % Write the toc entry for this chapter.  Must come before the
+    % \donoderef, because we include the current node name in the toc
+    % entry, and \donoderef resets it to empty.
+    \writetocentry{\toctype}{#1}{#3}%
+    %
+    % For pdftex, we have to write out the node definition (aka, make
+    % the pdfdest) after any page break, but before the actual text has
+    % been typeset.  If the destination for the pdf outline is after the
+    % text, then jumping from the outline may wind up with the text not
+    % being visible, for instance under high magnification.
+    \donoderef{#2}%
+    %
+    % Typeset the actual heading.
+    \nobreak % Avoid page breaks at the interline glue.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
+          \hangindent=\wd0 \centerparametersmaybe
+          \unhbox0 #1\par}%
+  }%
+  \nobreak\bigskip % no page break after a chapter title
+  \nobreak
+}
+
+% @centerchap -- centered and unnumbered.
+\let\centerparametersmaybe = \relax
+\def\centerparameters{%
+  \advance\rightskip by 3\rightskip
+  \leftskip = \rightskip
+  \parfillskip = 0pt
+}
+
+
+% I don't think this chapter style is supported any more, so I'm not
+% updating it with the new noderef stuff.  We'll see.  --karl, 11aug03.
+%
+\def\setchapterstyle #1 {\csname CHAPF#1\endcsname}
+%
+\def\unnchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+                       \parindent=0pt\ptexraggedright
+                       \rmisbold #1\hfill}}\bigskip \par\nobreak
+}
+\def\chfopen #1#2{\chapoddpage {\chapfonts
+\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}%
+\par\penalty 5000 %
+}
+\def\centerchfopen #1{%
+\chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000
+                       \parindent=0pt
+                       \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak
+}
+\def\CHAPFopen{%
+  \global\let\chapmacro=\chfopen
+  \global\let\centerchapmacro=\centerchfopen}
+
+
+% Section titles.  These macros combine the section number parts and
+% call the generic \sectionheading to do the printing.
+%
+\newskip\secheadingskip
+\def\secheadingbreak{\dobreak \secheadingskip{-1000}}
+
+% Subsection titles.
+\newskip\subsecheadingskip
+\def\subsecheadingbreak{\dobreak \subsecheadingskip{-500}}
+
+% Subsubsection titles.
+\def\subsubsecheadingskip{\subsecheadingskip}
+\def\subsubsecheadingbreak{\subsecheadingbreak}
+
+
+% Print any size, any type, section title.
+%
+% #1 is the text, #2 is the section level (sec/subsec/subsubsec), #3 is
+% the section type for xrefs (Ynumbered, Ynothing, Yappendix), #4 is the
+% section number.
+%
+\def\seckeyword{sec}
+%
+\def\sectionheading#1#2#3#4{%
+  {%
+    \checkenv{}% should not be in an environment.
+    %
+    % Switch to the right set of fonts.
+    \csname #2fonts\endcsname \rmisbold
+    %
+    \def\sectionlevel{#2}%
+    \def\temptype{#3}%
+    %
+    % Insert first mark before the heading break (see notes for \domark).
+    \let\prevsectiondefs=\lastsectiondefs
+    \ifx\temptype\Ynothingkeyword
+      \ifx\sectionlevel\seckeyword
+        \gdef\lastsectiondefs{\gdef\thissectionname{#1}\gdef\thissectionnum{}%
+                              \gdef\thissection{\thissectionname}}%
+      \fi
+    \else\ifx\temptype\Yomitfromtockeyword
+      % Don't redefine \thissection.
+    \else\ifx\temptype\Yappendixkeyword
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \else
+      \ifx\sectionlevel\seckeyword
+        \toks0={#1}%
+        \xdef\lastsectiondefs{%
+          \gdef\noexpand\thissectionname{\the\toks0}%
+          \gdef\noexpand\thissectionnum{#4}%
+          % \noexpand\putwordSection avoids expanding indigestible
+          % commands in some of the translations.
+          \gdef\noexpand\thissection{\noexpand\putwordSection{}
+                                     \noexpand\thissectionnum:
+                                     \noexpand\thissectionname}%
+        }%
+      \fi
+    \fi\fi\fi
+    %
+    % Go into vertical mode.  Usually we'll already be there, but we
+    % don't want the following whatsit to end up in a preceding paragraph
+    % if the document didn't happen to have a blank line.
+    \par
+    %
+    % Output the mark.  Pass it through \safewhatsit, to take care of
+    % the preceding space.
+    \safewhatsit\domark
+    %
+    % Insert space above the heading.
+    \csname #2headingbreak\endcsname
+    %
+    % Now the second mark, after the heading break.  No break points
+    % between here and the heading.
+    \let\prevsectiondefs=\lastsectiondefs
+    \domark
+    %
+    % Only insert the space after the number if we have a section number.
+    \ifx\temptype\Ynothingkeyword
+      \setbox0 = \hbox{}%
+      \def\toctype{unn}%
+      \gdef\lastsection{#1}%
+    \else\ifx\temptype\Yomitfromtockeyword
+      % for @headings -- no section number, don't include in toc,
+      % and don't redefine \lastsection.
+      \setbox0 = \hbox{}%
+      \def\toctype{omit}%
+      \let\sectionlevel=\empty
+    \else\ifx\temptype\Yappendixkeyword
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{app}%
+      \gdef\lastsection{#1}%
+    \else
+      \setbox0 = \hbox{#4\enspace}%
+      \def\toctype{num}%
+      \gdef\lastsection{#1}%
+    \fi\fi\fi
+    %
+    % Write the toc entry (before \donoderef).  See comments in \chapmacro.
+    \writetocentry{\toctype\sectionlevel}{#1}{#4}%
+    %
+    % Write the node reference (= pdf destination for pdftex).
+    % Again, see comments in \chapmacro.
+    \donoderef{#3}%
+    %
+    % Interline glue will be inserted when the vbox is completed.
+    % That glue will be a valid breakpoint for the page, since it'll be
+    % preceded by a whatsit (usually from the \donoderef, or from the
+    % \writetocentry if there was no node).  We don't want to allow that
+    % break, since then the whatsits could end up on page n while the
+    % section is on page n+1, thus toc/etc. are wrong.  Debian bug 276000.
+    \nobreak
+    %
+    % Output the actual section heading.
+    \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright
+          \hangindent=\wd0  % zero if no section number
+          \unhbox0 #1}%
+  }%
+  % Add extra space after the heading -- half of whatever came above it.
+  % Don't allow stretch, though.
+  \kern .5 \csname #2headingskip\endcsname
+  %
+  % Do not let the kern be a potential breakpoint, as it would be if it
+  % was followed by glue.
+  \nobreak
+  %
+  % We'll almost certainly start a paragraph next, so don't let that
+  % glue accumulate.  (Not a breakpoint because it's preceded by a
+  % discardable item.)
+  \vskip-\parskip
+  %
+  % This is purely so the last item on the list is a known \penalty >
+  % 10000.  This is so \startdefun can avoid allowing breakpoints after
+  % section headings.  Otherwise, it would insert a valid breakpoint between:
+  %   @section sec-whatever
+  %   @deffn def-whatever
+  \penalty 10001
+}
+
+
+\message{toc,}
+% Table of contents.
+\newwrite\tocfile
+
+% Write an entry to the toc file, opening it if necessary.
+% Called from @chapter, etc.
+%
+% Example usage: \writetocentry{sec}{Section Name}{\the\chapno.\the\secno}
+% We append the current node name (if any) and page number as additional
+% arguments for the \{chap,sec,...}entry macros which will eventually
+% read this.  The node name is used in the pdf outlines as the
+% destination to jump to.
+%
+% We open the .toc file for writing here instead of at @setfilename (or
+% any other fixed time) so that @contents can be anywhere in the document.
+% But if #1 is `omit', then we don't do anything.  This is used for the
+% table of contents chapter openings themselves.
+%
+\newif\iftocfileopened
+\def\omitkeyword{omit}%
+%
+\def\writetocentry#1#2#3{%
+  \edef\writetoctype{#1}%
+  \ifx\writetoctype\omitkeyword \else
+    \iftocfileopened\else
+      \immediate\openout\tocfile = \jobname.toc
+      \global\tocfileopenedtrue
+    \fi
+    %
+    \iflinks
+      {\atdummies
+       \edef\temp{%
+         \write\tocfile{@#1entry{#2}{#3}{\lastnode}{\noexpand\folio}}}%
+       \temp
+      }%
+    \fi
+  \fi
+  %
+  % Tell \shipout to create a pdf destination on each page, if we're
+  % writing pdf.  These are used in the table of contents.  We can't
+  % just write one on every page because the title pages are numbered
+  % 1 and 2 (the page numbers aren't printed), and so are the first
+  % two pages of the document.  Thus, we'd have two destinations named
+  % `1', and two named `2'.
+  \ifpdf \global\pdfmakepagedesttrue \fi
+}
+
+
+% These characters do not print properly in the Computer Modern roman
+% fonts, so we must take special care.  This is more or less redundant
+% with the Texinfo input format setup at the end of this file.
+%
+\def\activecatcodes{%
+  \catcode`\"=\active
+  \catcode`\$=\active
+  \catcode`\<=\active
+  \catcode`\>=\active
+  \catcode`\\=\active
+  \catcode`\^=\active
+  \catcode`\_=\active
+  \catcode`\|=\active
+  \catcode`\~=\active
+}
+
+
+% Read the toc file, which is essentially Texinfo input.
+\def\readtocfile{%
+  \setupdatafile
+  \activecatcodes
+  \input \tocreadfilename
+}
+
+\newskip\contentsrightmargin \contentsrightmargin=1in
+\newcount\savepageno
+\newcount\lastnegativepageno \lastnegativepageno = -1
+
+% Prepare to read what we've written to \tocfile.
+%
+\def\startcontents#1{%
+  % If @setchapternewpage on, and @headings double, the contents should
+  % start on an odd page, unlike chapters.  Thus, we maintain
+  % \contentsalignmacro in parallel with \pagealignmacro.
+  % From: Torbjorn Granlund <tege@matematik.su.se>
+  \contentsalignmacro
+  \immediate\closeout\tocfile
+  %
+  % Don't need to put `Contents' or `Short Contents' in the headline.
+  % It is abundantly clear what they are.
+  \chapmacro{#1}{Yomitfromtoc}{}%
+  %
+  \savepageno = \pageno
+  \begingroup                  % Set up to handle contents files properly.
+    \raggedbottom              % Worry more about breakpoints than the bottom.
+    \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+    %
+    % Roman numerals for page numbers.
+    \ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
+}
+
+% redefined for the two-volume lispref.  We always output on
+% \jobname.toc even if this is redefined.
+%
+\def\tocreadfilename{\jobname.toc}
+
+% Normal (long) toc.
+%
+\def\contents{%
+  \startcontents{\putwordTOC}%
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+    \ifeof 1 \else
+      \pdfmakeoutlines
+    \fi
+    \closein 1
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+
+% And just the chapters.
+\def\summarycontents{%
+  \startcontents{\putwordShortTOC}%
+    %
+    \let\partentry = \shortpartentry
+    \let\numchapentry = \shortchapentry
+    \let\appentry = \shortchapentry
+    \let\unnchapentry = \shortunnchapentry
+    % We want a true roman here for the page numbers.
+    \secfonts
+    \let\rm=\shortcontrm \let\bf=\shortcontbf
+    \let\sl=\shortcontsl \let\tt=\shortconttt
+    \rm
+    \hyphenpenalty = 10000
+    \advance\baselineskip by 1pt % Open it up a little.
+    \def\numsecentry##1##2##3##4{}
+    \let\appsecentry = \numsecentry
+    \let\unnsecentry = \numsecentry
+    \let\numsubsecentry = \numsecentry
+    \let\appsubsecentry = \numsecentry
+    \let\unnsubsecentry = \numsecentry
+    \let\numsubsubsecentry = \numsecentry
+    \let\appsubsubsecentry = \numsecentry
+    \let\unnsubsubsecentry = \numsecentry
+    \openin 1 \tocreadfilename\space
+    \ifeof 1 \else
+      \readtocfile
+    \fi
+    \closein 1
+    \vfill \eject
+    \contentsalignmacro % in case @setchapternewpage odd is in effect
+  \endgroup
+  \lastnegativepageno = \pageno
+  \global\pageno = \savepageno
+}
+\let\shortcontents = \summarycontents
+
+% Typeset the label for a chapter or appendix for the short contents.
+% The arg is, e.g., `A' for an appendix, or `3' for a chapter.
+%
+\def\shortchaplabel#1{%
+  % This space should be enough, since a single number is .5em, and the
+  % widest letter (M) is 1em, at least in the Computer Modern fonts.
+  % But use \hss just in case.
+  % (This space doesn't include the extra space that gets added after
+  % the label; that gets put in by \shortchapentry above.)
+  %
+  % We'd like to right-justify chapter numbers, but that looks strange
+  % with appendix letters.  And right-justifying numbers and
+  % left-justifying letters looks strange when there is less than 10
+  % chapters.  Have to read the whole toc once to know how many chapters
+  % there are before deciding ...
+  \hbox to 1em{#1\hss}%
+}
+
+% These macros generate individual entries in the table of contents.
+% The first argument is the chapter or section name.
+% The last argument is the page number.
+% The arguments in between are the chapter number, section number, ...
+
+% Parts, in the main contents.  Replace the part number, which doesn't
+% exist, with an empty box.  Let's hope all the numbers have the same width.
+% Also ignore the page number, which is conventionally not printed.
+\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
+\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}}
+%
+% Parts, in the short toc.
+\def\shortpartentry#1#2#3#4{%
+  \penalty-300
+  \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip
+  \shortchapentry{{\bf #1}}{\numeralbox}{}{}%
+}
+
+% Chapters, in the main contents.
+\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
+%
+% Chapters, in the short toc.
+% See comments in \dochapentry re vbox and related settings.
+\def\shortchapentry#1#2#3#4{%
+  \tocentry{\shortchaplabel{#2}\labelspace #1}{\doshortpageno\bgroup#4\egroup}%
+}
+
+% Appendices, in the main contents.
+% Need the word Appendix, and a fixed-size box.
+%
+\def\appendixbox#1{%
+  % We use M since it's probably the widest letter.
+  \setbox0 = \hbox{\putwordAppendix{} M}%
+  \hbox to \wd0{\putwordAppendix{} #1\hss}}
+%
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
+
+% Unnumbered chapters.
+\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
+\def\shortunnchapentry#1#2#3#4{\tocentry{#1}{\doshortpageno\bgroup#4\egroup}}
+
+% Sections.
+\def\numsecentry#1#2#3#4{\dosecentry{#2\labelspace#1}{#4}}
+\let\appsecentry=\numsecentry
+\def\unnsecentry#1#2#3#4{\dosecentry{#1}{#4}}
+
+% Subsections.
+\def\numsubsecentry#1#2#3#4{\dosubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsecentry=\numsubsecentry
+\def\unnsubsecentry#1#2#3#4{\dosubsecentry{#1}{#4}}
+
+% And subsubsections.
+\def\numsubsubsecentry#1#2#3#4{\dosubsubsecentry{#2\labelspace#1}{#4}}
+\let\appsubsubsecentry=\numsubsubsecentry
+\def\unnsubsubsecentry#1#2#3#4{\dosubsubsecentry{#1}{#4}}
+
+% This parameter controls the indentation of the various levels.
+% Same as \defaultparindent.
+\newdimen\tocindent \tocindent = 15pt
+
+% Now for the actual typesetting. In all these, #1 is the text and #2 is the
+% page number.
+%
+% If the toc has to be broken over pages, we want it to be at chapters
+% if at all possible; hence the \penalty.
+\def\dochapentry#1#2{%
+   \penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
+   \begingroup
+     \chapentryfonts
+     \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+   \endgroup
+   \nobreak\vskip .25\baselineskip plus.1\baselineskip
+}
+
+\def\dosecentry#1#2{\begingroup
+  \secentryfonts \leftskip=\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsecentry#1#2{\begingroup
+  \subsecentryfonts \leftskip=2\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+\def\dosubsubsecentry#1#2{\begingroup
+  \subsubsecentryfonts \leftskip=3\tocindent
+  \tocentry{#1}{\dopageno\bgroup#2\egroup}%
+\endgroup}
+
+% We use the same \entry macro as for the index entries.
+\let\tocentry = \entry
+
+% Space between chapter (or whatever) number and the title.
+\def\labelspace{\hskip1em \relax}
+
+\def\dopageno#1{{\rm #1}}
+\def\doshortpageno#1{{\rm #1}}
+
+\def\chapentryfonts{\secfonts \rm}
+\def\secentryfonts{\textfonts}
+\def\subsecentryfonts{\textfonts}
+\def\subsubsecentryfonts{\textfonts}
+
+
+\message{environments,}
+% @foo ... @end foo.
+
+% @tex ... @end tex    escapes into raw TeX temporarily.
+% One exception: @ is still an escape character, so that @end tex works.
+% But \@ or @@ will get a plain @ character.
+
+\envdef\tex{%
+  \setupmarkupstyle{tex}%
+  \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+  \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+  \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie
+  \catcode `\%=14
+  \catcode `\+=\other
+  \catcode `\"=\other
+  \catcode `\|=\other
+  \catcode `\<=\other
+  \catcode `\>=\other
+  \catcode`\`=\other
+  \catcode`\'=\other
+  \escapechar=`\\
+  %
+  % ' is active in math mode (mathcode"8000).  So reset it, and all our
+  % other math active characters (just in case), to plain's definitions.
+  \mathactive
+  %
+  \let\b=\ptexb
+  \let\bullet=\ptexbullet
+  \let\c=\ptexc
+  \let\,=\ptexcomma
+  \let\.=\ptexdot
+  \let\dots=\ptexdots
+  \let\equiv=\ptexequiv
+  \let\!=\ptexexclam
+  \let\i=\ptexi
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  \let\{=\ptexlbrace
+  \let\+=\tabalign
+  \let\}=\ptexrbrace
+  \let\/=\ptexslash
+  \let\*=\ptexstar
+  \let\t=\ptext
+  \expandafter \let\csname top\endcsname=\ptextop  % outer
+  \let\frenchspacing=\plainfrenchspacing
+  %
+  \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+  \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+  \def\@{@}%
+}
+% There is no need to define \Etex.
+
+% Define @lisp ... @end lisp.
+% @lisp environment forms a group so it can rebind things,
+% including the definition of @end lisp (which normally is erroneous).
+
+% Amount to narrow the margins by for @lisp.
+\newskip\lispnarrowing \lispnarrowing=0.4in
+
+% This is the definition that ^^M gets inside @lisp, @example, and other
+% such environments.  \null is better than a space, since it doesn't
+% have any width.
+\def\lisppar{\null\endgraf}
+
+% This space is always present above and below environments.
+\newskip\envskipamount \envskipamount = 0pt
+
+% Make spacing and below environment symmetrical.  We use \parskip here
+% to help in doing that, since in @example-like environments \parskip
+% is reset to zero; thus the \afterenvbreak inserts no space -- but the
+% start of the next paragraph will insert \parskip.
+%
+\def\aboveenvbreak{{%
+  % =10000 instead of <10000 because of a special case in \itemzzz and
+  % \sectionheading, q.v.
+  \ifnum \lastpenalty=10000 \else
+    \advance\envskipamount by \parskip
+    \endgraf
+    \ifdim\lastskip<\envskipamount
+      \removelastskip
+      % it's not a good place to break if the last penalty was \nobreak
+      % or better ...
+      \ifnum\lastpenalty<10000 \penalty-50 \fi
+      \vskip\envskipamount
+    \fi
+  \fi
+}}
+
+\let\afterenvbreak = \aboveenvbreak
+
+% \nonarrowing is a flag.  If "set", @lisp etc don't narrow margins; it will
+% also clear it, so that its embedded environments do the narrowing again.
+\let\nonarrowing=\relax
+
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
+\font\circle=lcircle10
+\newdimen\circthick
+\newdimen\cartouter\newdimen\cartinner
+\newskip\normbskip\newskip\normpskip\newskip\normlskip
+\circthick=\fontdimen8\circle
+%
+\def\ctl{{\circle\char'013\hskip -6pt}}% 6pt from pl file: 1/2charwidth
+\def\ctr{{\hskip 6pt\circle\char'010}}
+\def\cbl{{\circle\char'012\hskip -6pt}}
+\def\cbr{{\hskip 6pt\circle\char'011}}
+\def\carttop{\hbox to \cartouter{\hskip\lskip
+        \ctl\leaders\hrule height\circthick\hfil\ctr
+        \hskip\rskip}}
+\def\cartbot{\hbox to \cartouter{\hskip\lskip
+        \cbl\leaders\hrule height\circthick\hfil\cbr
+        \hskip\rskip}}
+%
+\newskip\lskip\newskip\rskip
+
+\envdef\cartouche{%
+  \ifhmode\par\fi  % can't be in the midst of a paragraph.
+  \startsavinginserts
+  \lskip=\leftskip \rskip=\rightskip
+  \leftskip=0pt\rightskip=0pt % we want these *outside*.
+  \cartinner=\hsize \advance\cartinner by-\lskip
+  \advance\cartinner by-\rskip
+  \cartouter=\hsize
+  \advance\cartouter by 18.4pt	% allow for 3pt kerns on either
+				% side, and for 6pt waste from
+				% each corner char, and rule thickness
+  \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
+  % Flag to tell @lisp, etc., not to narrow margin.
+  \let\nonarrowing = t%
+  %
+  % If this cartouche directly follows a sectioning command, we need the
+  % \parskip glue (backspaced over by default) or the cartouche can
+  % collide with the section heading.
+  \ifnum\lastpenalty>10000 \vskip\parskip \fi
+  %
+  \vbox\bgroup
+      \baselineskip=0pt\parskip=0pt\lineskip=0pt
+      \carttop
+      \hbox\bgroup
+	  \hskip\lskip
+	  \vrule\kern3pt
+	  \vbox\bgroup
+	      \kern3pt
+	      \hsize=\cartinner
+	      \baselineskip=\normbskip
+	      \lineskip=\normlskip
+	      \parskip=\normpskip
+	      \vskip -\parskip
+	      \comment % For explanation, see the end of def\group.
+}
+\def\Ecartouche{%
+              \ifhmode\par\fi
+	      \kern3pt
+	  \egroup
+	  \kern3pt\vrule
+	  \hskip\rskip
+      \egroup
+      \cartbot
+  \egroup
+  \checkinserts
+}
+
+
+% This macro is called at the beginning of all the @example variants,
+% inside a group.
+\newdimen\nonfillparindent
+\def\nonfillstart{%
+  \aboveenvbreak
+  \hfuzz = 12pt % Don't be fussy
+  \sepspaces % Make spaces be word-separators rather than space tokens.
+  \let\par = \lisppar % don't ignore blank lines
+  \obeylines % each line of input is a line of output
+  \parskip = 0pt
+  % Turn off paragraph indentation but redefine \indent to emulate
+  % the normal \indent.
+  \nonfillparindent=\parindent
+  \parindent = 0pt
+  \let\indent\nonfillindent
+  %
+  \emergencystretch = 0pt % don't try to avoid overfull boxes
+  \ifx\nonarrowing\relax
+    \advance \leftskip by \lispnarrowing
+    \exdentamount=\lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+  \let\exdent=\nofillexdent
+}
+
+\begingroup
+\obeyspaces
+% We want to swallow spaces (but not other tokens) after the fake
+% @indent in our nonfill-environments, where spaces are normally
+% active and set to @tie, resulting in them not being ignored after
+% @indent.
+\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}%
+\gdef\nonfillindentcheck{%
+\ifx\temp %
+\expandafter\nonfillindentgobble%
+\else%
+\leavevmode\nonfillindentbox%
+\fi%
+}%
+\endgroup
+\def\nonfillindentgobble#1{\nonfillindent}
+\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}}
+
+% If you want all examples etc. small: @set dispenvsize small.
+% If you want even small examples the full size: @set dispenvsize nosmall.
+% This affects the following displayed environments:
+%    @example, @display, @format, @lisp
+%
+\def\smallword{small}
+\def\nosmallword{nosmall}
+\let\SETdispenvsize\relax
+\def\setnormaldispenv{%
+  \ifx\SETdispenvsize\smallword
+    % end paragraph for sake of leading, in case document has no blank
+    % line.  This is redundant with what happens in \aboveenvbreak, but
+    % we need to do it before changing the fonts, and it's inconvenient
+    % to change the fonts afterward.
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+\def\setsmalldispenv{%
+  \ifx\SETdispenvsize\nosmallword
+  \else
+    \ifnum \lastpenalty=10000 \else \endgraf \fi
+    \smallexamplefonts \rm
+  \fi
+}
+
+% We often define two environments, @foo and @smallfoo.
+% Let's do it in one command.  #1 is the env name, #2 the definition.
+\def\makedispenvdef#1#2{%
+  \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}%
+  \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}%
+  \expandafter\let\csname E#1\endcsname \afterenvbreak
+  \expandafter\let\csname Esmall#1\endcsname \afterenvbreak
+}
+
+% Define two environment synonyms (#1 and #2) for an environment.
+\def\maketwodispenvdef#1#2#3{%
+  \makedispenvdef{#1}{#3}%
+  \makedispenvdef{#2}{#3}%
+}
+%
+% @lisp: indented, narrowed, typewriter font;
+% @example: same as @lisp.
+%
+% @smallexample and @smalllisp: use smaller fonts.
+% Originally contributed by Pavel@xerox.
+%
+\maketwodispenvdef{lisp}{example}{%
+  \nonfillstart
+  \tt\setupmarkupstyle{example}%
+  \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special.
+  \gobble % eat return
+}
+% @display/@smalldisplay: same as @lisp except keep current font.
+%
+\makedispenvdef{display}{%
+  \nonfillstart
+  \gobble
+}
+
+% @format/@smallformat: same as @display except don't narrow margins.
+%
+\makedispenvdef{format}{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+
+% @flushleft: same as @format, but doesn't obey \SETdispenvsize.
+\envdef\flushleft{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \gobble
+}
+\let\Eflushleft = \afterenvbreak
+
+% @flushright.
+%
+\envdef\flushright{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \advance\leftskip by 0pt plus 1fill\relax
+  \gobble
+}
+\let\Eflushright = \afterenvbreak
+
+
+% @raggedright does more-or-less normal line breaking but no right
+% justification.  From plain.tex.
+\envdef\raggedright{%
+  \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax
+}
+\let\Eraggedright\par
+
+\envdef\raggedleft{%
+  \parindent=0pt \leftskip0pt plus2em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedleft\par
+
+\envdef\raggedcenter{%
+  \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em
+  \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt
+  \hbadness=10000 % Last line will usually be underfull, so turn off
+                  % badness reporting.
+}
+\let\Eraggedcenter\par
+
+
+% @quotation does normal linebreaking (hence we can't use \nonfillstart)
+% and narrows the margins.  We keep \parskip nonzero in general, since
+% we're doing normal filling.  So, when using \aboveenvbreak and
+% \afterenvbreak, temporarily make \parskip 0.
+%
+\makedispenvdef{quotation}{\quotationstart}
+%
+\def\quotationstart{%
+  {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip
+  \parindent=0pt
+  %
+  % @cartouche defines \nonarrowing to inhibit narrowing at next level down.
+  \ifx\nonarrowing\relax
+    \advance\leftskip by \lispnarrowing
+    \advance\rightskip by \lispnarrowing
+    \exdentamount = \lispnarrowing
+  \else
+    \let\nonarrowing = \relax
+  \fi
+  \parsearg\quotationlabel
+}
+
+% We have retained a nonzero parskip for the environment, since we're
+% doing normal filling.
+%
+\def\Equotation{%
+  \par
+  \ifx\quotationauthor\thisisundefined\else
+    % indent a bit.
+    \leftline{\kern 2\leftskip \sl ---\quotationauthor}%
+  \fi
+  {\parskip=0pt \afterenvbreak}%
+}
+\def\Esmallquotation{\Equotation}
+
+% If we're given an argument, typeset it in bold with a colon after.
+\def\quotationlabel#1{%
+  \def\temp{#1}%
+  \ifx\temp\empty \else
+    {\bf #1: }%
+  \fi
+}
+
+
+% LaTeX-like @verbatim...@end verbatim and @verb{<char>...<char>}
+% If we want to allow any <char> as delimiter,
+% we need the curly braces so that makeinfo sees the @verb command, eg:
+% `@verbx...x' would look like the '@verbx' command.  --janneke@gnu.org
+%
+% [Knuth]: Donald Ervin Knuth, 1996.  The TeXbook.
+%
+% [Knuth] p.344; only we need to do the other characters Texinfo sets
+% active too.  Otherwise, they get lost as the first character on a
+% verbatim line.
+\def\dospecials{%
+  \do\ \do\\\do\{\do\}\do\$\do\&%
+  \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~%
+  \do\<\do\>\do\|\do\@\do+\do\"%
+  % Don't do the quotes -- if we do, @set txicodequoteundirected and
+  % @set txicodequotebacktick will not have effect on @verb and
+  % @verbatim, and ?` and !` ligatures won't get disabled.
+  %\do\`\do\'%
+}
+%
+% [Knuth] p. 380
+\def\uncatcodespecials{%
+  \def\do##1{\catcode`##1=\other}\dospecials}
+%
+% Setup for the @verb command.
+%
+% Eight spaces for a tab
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabeightspaces{\catcode`\^^I=\active\def^^I{\ \ \ \ \ \ \ \ }}
+\endgroup
+%
+\def\setupverb{%
+  \tt  % easiest (and conventionally used) font for verbatim
+  \def\par{\leavevmode\endgraf}%
+  \setupmarkupstyle{verb}%
+  \tabeightspaces
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count
+  % must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+}
+
+% Setup for the @verbatim environment
+%
+% Real tab expansion.
+\newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount
+%
+% We typeset each line of the verbatim in an \hbox, so we can handle
+% tabs.  The \global is in case the verbatim line starts with an accent,
+% or some other command that starts with a begin-group.  Otherwise, the
+% entire \verbbox would disappear at the corresponding end-group, before
+% it is typeset.  Meanwhile, we can't have nested verbatim commands
+% (can we?), so the \global won't be overwriting itself.
+\newbox\verbbox
+\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup}
+%
+\begingroup
+  \catcode`\^^I=\active
+  \gdef\tabexpand{%
+    \catcode`\^^I=\active
+    \def^^I{\leavevmode\egroup
+      \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab
+      \divide\dimen\verbbox by\tabw
+      \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw
+      \advance\dimen\verbbox by\tabw  % advance to next multiple of \tabw
+      \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox
+    }%
+  }
+\endgroup
+
+% start the verbatim environment.
+\def\setupverbatim{%
+  \let\nonarrowing = t%
+  \nonfillstart
+  \tt % easiest (and conventionally used) font for verbatim
+  % The \leavevmode here is for blank lines.  Otherwise, we would
+  % never \starttabox and the \egroup would end verbatim mode.
+  \def\par{\leavevmode\egroup\box\verbbox\endgraf}%
+  \tabexpand
+  \setupmarkupstyle{verbatim}%
+  % Respect line breaks,
+  % print special symbols as themselves, and
+  % make each space count.
+  % Must do in this order:
+  \obeylines \uncatcodespecials \sepspaces
+  \everypar{\starttabbox}%
+}
+
+% Do the @verb magic: verbatim text is quoted by unique
+% delimiter characters.  Before first delimiter expect a
+% right brace, after last delimiter expect closing brace:
+%
+%    \def\doverb'{'<char>#1<char>'}'{#1}
+%
+% [Knuth] p. 382; only eat outer {}
+\begingroup
+  \catcode`[=1\catcode`]=2\catcode`\{=\other\catcode`\}=\other
+  \gdef\doverb{#1[\def\next##1#1}[##1\endgroup]\next]
+\endgroup
+%
+\def\verb{\begingroup\setupverb\doverb}
+%
+%
+% Do the @verbatim magic: define the macro \doverbatim so that
+% the (first) argument ends when '@end verbatim' is reached, ie:
+%
+%     \def\doverbatim#1@end verbatim{#1}
+%
+% For Texinfo it's a lot easier than for LaTeX,
+% because texinfo's \verbatim doesn't stop at '\end{verbatim}':
+% we need not redefine '\', '{' and '}'.
+%
+% Inspired by LaTeX's verbatim command set [latex.ltx]
+%
+\begingroup
+  \catcode`\ =\active
+  \obeylines %
+  % ignore everything up to the first ^^M, that's the newline at the end
+  % of the @verbatim input line itself.  Otherwise we get an extra blank
+  % line in the output.
+  \xdef\doverbatim#1^^M#2@end verbatim{#2\noexpand\end\gobble verbatim}%
+  % We really want {...\end verbatim} in the body of the macro, but
+  % without the active space; thus we have to use \xdef and \gobble.
+\endgroup
+%
+\envdef\verbatim{%
+    \setupverbatim\doverbatim
+}
+\let\Everbatim = \afterenvbreak
+
+
+% @verbatiminclude FILE - insert text of file in verbatim environment.
+%
+\def\verbatiminclude{\parseargusing\filenamecatcodes\doverbatiminclude}
+%
+\def\doverbatiminclude#1{%
+  {%
+    \makevalueexpandable
+    \setupverbatim
+    \indexnofonts       % Allow `@@' and other weird things in file names.
+    \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}%
+    \input #1
+    \afterenvbreak
+  }%
+}
+
+% @copying ... @end copying.
+% Save the text away for @insertcopying later.
+%
+% We save the uninterpreted tokens, rather than creating a box.
+% Saving the text in a box would be much easier, but then all the
+% typesetting commands (@smallbook, font changes, etc.) have to be done
+% beforehand -- and a) we want @copying to be done first in the source
+% file; b) letting users define the frontmatter in as flexible order as
+% possible is very desirable.
+%
+\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
+\def\docopying#1@end copying{\endgroup\def\copyingtext{#1}}
+%
+\def\insertcopying{%
+  \begingroup
+    \parindent = 0pt  % paragraph indentation looks wrong on title page
+    \scanexp\copyingtext
+  \endgroup
+}
+
+
+\message{defuns,}
+% @defun etc.
+
+\newskip\defbodyindent \defbodyindent=.4in
+\newskip\defargsindent \defargsindent=50pt
+\newskip\deflastargmargin \deflastargmargin=18pt
+\newcount\defunpenalty
+
+% Start the processing of @deffn:
+\def\startdefun{%
+  \ifnum\lastpenalty<10000
+    \medbreak
+    \defunpenalty=10003 % Will keep this @deffn together with the
+                        % following @def command, see below.
+  \else
+    % If there are two @def commands in a row, we'll have a \nobreak,
+    % which is there to keep the function description together with its
+    % header.  But if there's nothing but headers, we need to allow a
+    % break somewhere.  Check specifically for penalty 10002, inserted
+    % by \printdefunline, instead of 10000, since the sectioning
+    % commands also insert a nobreak penalty, and we don't want to allow
+    % a break between a section heading and a defun.
+    %
+    % As a further refinement, we avoid "club" headers by signalling
+    % with penalty of 10003 after the very first @deffn in the
+    % sequence (see above), and penalty of 10002 after any following
+    % @def command.
+    \ifnum\lastpenalty=10002 \penalty2000 \else \defunpenalty=10002 \fi
+    %
+    % Similarly, after a section heading, do not allow a break.
+    % But do insert the glue.
+    \medskip  % preceded by discardable penalty, so not a breakpoint
+  \fi
+  %
+  \parindent=0in
+  \advance\leftskip by \defbodyindent
+  \exdentamount=\defbodyindent
+}
+
+\def\dodefunx#1{%
+  % First, check whether we are in the right environment:
+  \checkenv#1%
+  %
+  % As above, allow line break if we have multiple x headers in a row.
+  % It's not a great place, though.
+  \ifnum\lastpenalty=10002 \penalty3000 \else \defunpenalty=10002 \fi
+  %
+  % And now, it's time to reuse the body of the original defun:
+  \expandafter\gobbledefun#1%
+}
+\def\gobbledefun#1\startdefun{}
+
+% \printdefunline \deffnheader{text}
+%
+\def\printdefunline#1#2{%
+  \begingroup
+    % call \deffnheader:
+    #1#2 \endheader
+    % common ending:
+    \interlinepenalty = 10000
+    \advance\rightskip by 0pt plus 1fil\relax
+    \endgraf
+    \nobreak\vskip -\parskip
+    \penalty\defunpenalty  % signal to \startdefun and \dodefunx
+    % Some of the @defun-type tags do not enable magic parentheses,
+    % rendering the following check redundant.  But we don't optimize.
+    \checkparencounts
+  \endgroup
+}
+
+\def\Edefun{\endgraf\medbreak}
+
+% \makedefun{deffn} creates \deffn, \deffnx and \Edeffn;
+% the only thing remaining is to define \deffnheader.
+%
+\def\makedefun#1{%
+  \expandafter\let\csname E#1\endcsname = \Edefun
+  \edef\temp{\noexpand\domakedefun
+    \makecsname{#1}\makecsname{#1x}\makecsname{#1header}}%
+  \temp
+}
+
+% \domakedefun \deffn \deffnx \deffnheader
+%
+% Define \deffn and \deffnx, without parameters.
+% \deffnheader has to be defined explicitly.
+%
+\def\domakedefun#1#2#3{%
+  \envdef#1{%
+    \startdefun
+    \doingtypefnfalse    % distinguish typed functions from all else
+    \parseargusing\activeparens{\printdefunline#3}%
+  }%
+  \def#2{\dodefunx#1}%
+  \def#3%
+}
+
+\newif\ifdoingtypefn       % doing typed function?
+\newif\ifrettypeownline    % typeset return type on its own line?
+
+% @deftypefnnewline on|off says whether the return type of typed functions
+% are printed on their own line.  This affects @deftypefn, @deftypefun,
+% @deftypeop, and @deftypemethod.
+% 
+\parseargdef\deftypefnnewline{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETtxideftypefnnl\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @txideftypefnnl value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+% Untyped functions:
+
+% @deffn category name args
+\makedefun{deffn}{\deffngeneral{}}
+
+% @deffn category class name args
+\makedefun{defop}#1 {\defopon{#1\ \putwordon}}
+
+% \defopon {category on}class name args
+\def\defopon#1#2 {\deffngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deffngeneral {subind}category name args
+%
+\def\deffngeneral#1#2 #3 #4\endheader{%
+  % Remember that \dosubind{fn}{foo}{} is equivalent to \doind{fn}{foo}.
+  \dosubind{fn}{\code{#3}}{#1}%
+  \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}%
+}
+
+% Typed functions:
+
+% @deftypefn category type name args
+\makedefun{deftypefn}{\deftypefngeneral{}}
+
+% @deftypeop category class type name args
+\makedefun{deftypeop}#1 {\deftypeopon{#1\ \putwordon}}
+
+% \deftypeopon {category on}class type name args
+\def\deftypeopon#1#2 {\deftypefngeneral{\putwordon\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypefngeneral {subind}category type name args
+%
+\def\deftypefngeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{fn}{\code{#4}}{#1}%
+  \doingtypefntrue
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Typed variables:
+
+% @deftypevr category type var args
+\makedefun{deftypevr}{\deftypecvgeneral{}}
+
+% @deftypecv category class type var args
+\makedefun{deftypecv}#1 {\deftypecvof{#1\ \putwordof}}
+
+% \deftypecvof {category of}class type var args
+\def\deftypecvof#1#2 {\deftypecvgeneral{\putwordof\ \code{#2}}{#1\ \code{#2}} }
+
+% \deftypecvgeneral {subind}category type var args
+%
+\def\deftypecvgeneral#1#2 #3 #4 #5\endheader{%
+  \dosubind{vr}{\code{#4}}{#1}%
+  \defname{#2}{#3}{#4}\defunargs{#5\unskip}%
+}
+
+% Untyped variables:
+
+% @defvr category var args
+\makedefun{defvr}#1 {\deftypevrheader{#1} {} }
+
+% @defcv category class var args
+\makedefun{defcv}#1 {\defcvof{#1\ \putwordof}}
+
+% \defcvof {category of}class var args
+\def\defcvof#1#2 {\deftypecvof{#1}#2 {} }
+
+% Types:
+
+% @deftp category name args
+\makedefun{deftp}#1 #2 #3\endheader{%
+  \doind{tp}{\code{#2}}%
+  \defname{#1}{}{#2}\defunargs{#3\unskip}%
+}
+
+% Remaining @defun-like shortcuts:
+\makedefun{defun}{\deffnheader{\putwordDeffunc} }
+\makedefun{defmac}{\deffnheader{\putwordDefmac} }
+\makedefun{defspec}{\deffnheader{\putwordDefspec} }
+\makedefun{deftypefun}{\deftypefnheader{\putwordDeffunc} }
+\makedefun{defvar}{\defvrheader{\putwordDefvar} }
+\makedefun{defopt}{\defvrheader{\putwordDefopt} }
+\makedefun{deftypevar}{\deftypevrheader{\putwordDefvar} }
+\makedefun{defmethod}{\defopon\putwordMethodon}
+\makedefun{deftypemethod}{\deftypeopon\putwordMethodon}
+\makedefun{defivar}{\defcvof\putwordInstanceVariableof}
+\makedefun{deftypeivar}{\deftypecvof\putwordInstanceVariableof}
+
+% \defname, which formats the name of the @def (not the args).
+% #1 is the category, such as "Function".
+% #2 is the return type, if any.
+% #3 is the function name.
+%
+% We are followed by (but not passed) the arguments, if any.
+%
+\def\defname#1#2#3{%
+  \par
+  % Get the values of \leftskip and \rightskip as they were outside the @def...
+  \advance\leftskip by -\defbodyindent
+  %
+  % Determine if we are typesetting the return type of a typed function
+  % on a line by itself.
+  \rettypeownlinefalse
+  \ifdoingtypefn  % doing a typed function specifically?
+    % then check user option for putting return type on its own line:
+    \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else
+      \rettypeownlinetrue
+    \fi
+  \fi
+  %
+  % How we'll format the category name.  Putting it in brackets helps
+  % distinguish it from the body text that may end up on the next line
+  % just below it.
+  \def\temp{#1}%
+  \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi}
+  %
+  % Figure out line sizes for the paragraph shape.  We'll always have at
+  % least two.
+  \tempnum = 2
+  %
+  % The first line needs space for \box0; but if \rightskip is nonzero,
+  % we need only space for the part of \box0 which exceeds it:
+  \dimen0=\hsize  \advance\dimen0 by -\wd0  \advance\dimen0 by \rightskip
+  %
+  % If doing a return type on its own line, we'll have another line.
+  \ifrettypeownline
+    \advance\tempnum by 1
+    \def\maybeshapeline{0in \hsize}%
+  \else
+    \def\maybeshapeline{}%
+  \fi
+  %
+  % The continuations:
+  \dimen2=\hsize  \advance\dimen2 by -\defargsindent
+  %
+  % The final paragraph shape:
+  \parshape \tempnum  0in \dimen0  \maybeshapeline  \defargsindent \dimen2
+  %
+  % Put the category name at the right margin.
+  \noindent
+  \hbox to 0pt{%
+    \hfil\box0 \kern-\hsize
+    % \hsize has to be shortened this way:
+    \kern\leftskip
+    % Intentionally do not respect \rightskip, since we need the space.
+  }%
+  %
+  % Allow all lines to be underfull without complaint:
+  \tolerance=10000 \hbadness=10000
+  \exdentamount=\defbodyindent
+  {%
+    % defun fonts. We use typewriter by default (used to be bold) because:
+    % . we're printing identifiers, they should be in tt in principle.
+    % . in languages with many accents, such as Czech or French, it's
+    %   common to leave accents off identifiers.  The result looks ok in
+    %   tt, but exceedingly strange in rm.
+    % . we don't want -- and --- to be treated as ligatures.
+    % . this still does not fix the ?` and !` ligatures, but so far no
+    %   one has made identifiers using them :).
+    \df \tt
+    \def\temp{#2}% text of the return type
+    \ifx\temp\empty\else
+      \tclose{\temp}% typeset the return type
+      \ifrettypeownline
+        % put return type on its own line; prohibit line break following:
+        \hfil\vadjust{\nobreak}\break  
+      \else
+        \space  % type on same line, so just followed by a space
+      \fi
+    \fi           % no return type
+    #3% output function name
+  }%
+  {\rm\enskip}% hskip 0.5 em of \tenrm
+  %
+  \boldbrax
+  % arguments will be output next, if any.
+}
+
+% Print arguments in slanted roman (not ttsl), inconsistently with using
+% tt for the name.  This is because literal text is sometimes needed in
+% the argument list (groff manual), and ttsl and tt are not very
+% distinguishable.  Prevent hyphenation at `-' chars.
+%
+\def\defunargs#1{%
+  % use sl by default (not ttsl),
+  % tt for the names.
+  \df \sl \hyphenchar\font=0
+  %
+  % On the other hand, if an argument has two dashes (for instance), we
+  % want a way to get ttsl.  Let's try @var for that.
+  \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}%
+  #1%
+  \sl\hyphenchar\font=45
+}
+
+% We want ()&[] to print specially on the defun line.
+%
+\def\activeparens{%
+  \catcode`\(=\active \catcode`\)=\active
+  \catcode`\[=\active \catcode`\]=\active
+  \catcode`\&=\active
+}
+
+% Make control sequences which act like normal parenthesis chars.
+\let\lparen = ( \let\rparen = )
+
+% Be sure that we always have a definition for `(', etc.  For example,
+% if the fn name has parens in it, \boldbrax will not be in effect yet,
+% so TeX would otherwise complain about undefined control sequence.
+{
+  \activeparens
+  \global\let(=\lparen \global\let)=\rparen
+  \global\let[=\lbrack \global\let]=\rbrack
+  \global\let& = \&
+
+  \gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb}
+  \gdef\magicamp{\let&=\amprm}
+}
+
+\newcount\parencount
+
+% If we encounter &foo, then turn on ()-hacking afterwards
+\newif\ifampseen
+\def\amprm#1 {\ampseentrue{\bf\&#1 }}
+
+\def\parenfont{%
+  \ifampseen
+    % At the first level, print parens in roman,
+    % otherwise use the default font.
+    \ifnum \parencount=1 \rm \fi
+  \else
+    % The \sf parens (in \boldbrax) actually are a little bolder than
+    % the contained text.  This is especially needed for [ and ] .
+    \sf
+  \fi
+}
+\def\infirstlevel#1{%
+  \ifampseen
+    \ifnum\parencount=1
+      #1%
+    \fi
+  \fi
+}
+\def\bfafterword#1 {#1 \bf}
+
+\def\opnr{%
+  \global\advance\parencount by 1
+  {\parenfont(}%
+  \infirstlevel \bfafterword
+}
+\def\clnr{%
+  {\parenfont)}%
+  \infirstlevel \sl
+  \global\advance\parencount by -1
+}
+
+\newcount\brackcount
+\def\lbrb{%
+  \global\advance\brackcount by 1
+  {\bf[}%
+}
+\def\rbrb{%
+  {\bf]}%
+  \global\advance\brackcount by -1
+}
+
+\def\checkparencounts{%
+  \ifnum\parencount=0 \else \badparencount \fi
+  \ifnum\brackcount=0 \else \badbrackcount \fi
+}
+% these should not use \errmessage; the glibc manual, at least, actually
+% has such constructs (when documenting function pointers).
+\def\badparencount{%
+  \message{Warning: unbalanced parentheses in @def...}%
+  \global\parencount=0
+}
+\def\badbrackcount{%
+  \message{Warning: unbalanced square brackets in @def...}%
+  \global\brackcount=0
+}
+
+
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\thisisundefined
+  \newwrite\macscribble
+  \def\scantokens#1{%
+    \toks0={#1}%
+    \immediate\openout\macscribble=\jobname.tmp
+    \immediate\write\macscribble{\the\toks0}%
+    \immediate\closeout\macscribble
+    \input \jobname.tmp
+  }
+\fi
+
+\def\scanmacro#1{\begingroup
+  \newlinechar`\^^M
+  \let\xeatspaces\eatspaces
+  %
+  % Undo catcode changes of \startcontents and \doprintindex
+  % When called from @insertcopying or (short)caption, we need active
+  % backslash to get it printed correctly.  Previously, we had
+  % \catcode`\\=\other instead.  We'll see whether a problem appears
+  % with macro expansion.				--kasal, 19aug04
+  \catcode`\@=0 \catcode`\\=\active \escapechar=`\@
+  %
+  % ... and for \example:
+  \spaceisspace
+  %
+  % The \empty here causes a following catcode 5 newline to be eaten as
+  % part of reading whitespace after a control sequence.  It does not
+  % eat a catcode 13 newline.  There's no good way to handle the two
+  % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX
+  % would then have different behavior).  See the Macro Details node in
+  % the manual for the workaround we recommend for macros and
+  % line-oriented commands.
+  % 
+  \scantokens{#1\empty}%
+\endgroup}
+
+\def\scanexp#1{%
+  \edef\temp{\noexpand\scanmacro{#1}}%
+  \temp
+}
+
+\newcount\paramno   % Count of parameters
+\newtoks\macname    % Macro name
+\newif\ifrecursive  % Is it recursive?
+
+% List of all defined macros in the form
+%    \definedummyword\macro1\definedummyword\macro2...
+% Currently is also contains all @aliases; the list can be split
+% if there is a need.
+\def\macrolist{}
+
+% Add the macro to \macrolist
+\def\addtomacrolist#1{\expandafter \addtomacrolistxxx \csname#1\endcsname}
+\def\addtomacrolistxxx#1{%
+     \toks0 = \expandafter{\macrolist\definedummyword#1}%
+     \xdef\macrolist{\the\toks0}%
+}
+
+% Utility routines.
+% This does \let #1 = #2, with \csnames; that is,
+%   \let \csname#1\endcsname = \csname#2\endcsname
+% (except of course we have to play expansion games).
+%
+\def\cslet#1#2{%
+  \expandafter\let
+  \csname#1\expandafter\endcsname
+  \csname#2\endcsname
+}
+
+% Trim leading and trailing spaces off a string.
+% Concepts from aro-bend problem 15 (see CTAN).
+{\catcode`\@=11
+\gdef\eatspaces #1{\expandafter\trim@\expandafter{#1 }}
+\gdef\trim@ #1{\trim@@ @#1 @ #1 @ @@}
+\gdef\trim@@ #1@ #2@ #3@@{\trim@@@\empty #2 @}
+\def\unbrace#1{#1}
+\unbrace{\gdef\trim@@@ #1 } #2@{#1}
+}
+
+% Trim a single trailing ^^M off a string.
+{\catcode`\^^M=\other \catcode`\Q=3%
+\gdef\eatcr #1{\eatcra #1Q^^MQ}%
+\gdef\eatcra#1^^MQ{\eatcrb#1Q}%
+\gdef\eatcrb#1Q#2Q{#1}%
+}
+
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \
+% to recognize macro arguments; this is the job of \mbodybackslash.
+%
+% Non-ASCII encodings make 8-bit characters active, so un-activate
+% them to avoid their expansion.  Must do this non-globally, to
+% confine the change to the current group.
+%
+% It's necessary to have hard CRs when the macro is executed. This is
+% done by making ^^M (\endlinechar) catcode 12 when reading the macro
+% body, and then making it the \newlinechar in \scanmacro.
+%
+\def\scanctxt{% used as subroutine
+  \catcode`\"=\other
+  \catcode`\+=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\@=\other
+  \catcode`\^=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\~=\other
+  \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi
+}
+
+\def\scanargctxt{% used for copying and captions, not macros.
+  \scanctxt
+  \catcode`\\=\other
+  \catcode`\^^M=\other
+}
+
+\def\macrobodyctxt{% used for @macro definitions
+  \scanctxt
+  \catcode`\{=\other
+  \catcode`\}=\other
+  \catcode`\^^M=\other
+  \usembodybackslash
+}
+
+\def\macroargctxt{% used when scanning invocations
+  \scanctxt
+  \catcode`\\=0
+}
+% why catcode 0 for \ in the above?  To recognize \\ \{ \} as "escapes"
+% for the single characters \ { }.  Thus, we end up with the "commands"
+% that would be written @\ @{ @} in a Texinfo document.
+% 
+% We already have @{ and @}.  For @\, we define it here, and only for
+% this purpose, to produce a typewriter backslash (so, the @\ that we
+% define for @math can't be used with @macro calls):
+%
+\def\\{\normalbackslash}%
+% 
+% We would like to do this for \, too, since that is what makeinfo does.
+% But it is not possible, because Texinfo already has a command @, for a
+% cedilla accent.  Documents must use @comma{} instead.
+%
+% \anythingelse will almost certainly be an error of some kind.
+
+
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+%
+{\catcode`@=0 @catcode`@\=@active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+\def\margbackslash#1{\char`\#1 }
+
+\def\macro{\recursivefalse\parsearg\macroxxx}
+\def\rmacro{\recursivetrue\parsearg\macroxxx}
+
+\def\macroxxx#1{%
+  \getargs{#1}% now \macname is the macname and \argl the arglist
+  \ifx\argl\empty       % no arguments
+     \paramno=0\relax
+  \else
+     \expandafter\parsemargdef \argl;%
+     \if\paramno>256\relax
+       \ifx\eTeXversion\thisisundefined
+         \errhelp = \EMsimple
+         \errmessage{You need eTeX to compile a file with macros with more than 256 arguments}
+       \fi
+     \fi
+  \fi
+  \if1\csname ismacro.\the\macname\endcsname
+     \message{Warning: redefining \the\macname}%
+  \else
+     \expandafter\ifx\csname \the\macname\endcsname \relax
+     \else \errmessage{Macro name \the\macname\space already defined}\fi
+     \global\cslet{macsave.\the\macname}{\the\macname}%
+     \global\expandafter\let\csname ismacro.\the\macname\endcsname=1%
+     \addtomacrolist{\the\macname}%
+  \fi
+  \begingroup \macrobodyctxt
+  \ifrecursive \expandafter\parsermacbody
+  \else \expandafter\parsemacbody
+  \fi}
+
+\parseargdef\unmacro{%
+  \if1\csname ismacro.#1\endcsname
+    \global\cslet{#1}{macsave.#1}%
+    \global\expandafter\let \csname ismacro.#1\endcsname=0%
+    % Remove the macro name from \macrolist:
+    \begingroup
+      \expandafter\let\csname#1\endcsname \relax
+      \let\definedummyword\unmacrodo
+      \xdef\macrolist{\macrolist}%
+    \endgroup
+  \else
+    \errmessage{Macro #1 not defined}%
+  \fi
+}
+
+% Called by \do from \dounmacro on each macro.  The idea is to omit any
+% macro definitions that have been changed to \relax.
+%
+\def\unmacrodo#1{%
+  \ifx #1\relax
+    % remove this
+  \else
+    \noexpand\definedummyword \noexpand#1%
+  \fi
+}
+
+% This makes use of the obscure feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
+\def\getargs#1{\getargsxxx#1{}}
+\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
+\def\getmacname#1 #2\relax{\macname={#1}}
+\def\getmacargs#1{\def\argl{#1}}
+
+% For macro processing make @ a letter so that we can make Texinfo private macro names.
+\edef\texiatcatcode{\the\catcode`\@}
+\catcode `@=11\relax
+
+% Parse the optional {params} list.  Set up \paramno and \paramlist
+% so \defmacro knows what to do.  Define \macarg.BLAH for each BLAH
+% in the params list to some hook where the argument si to be expanded.  If
+% there are less than 10 arguments that hook is to be replaced by ##N where N
+% is the position in that list, that is to say the macro arguments are to be
+% defined `a la TeX in the macro body.  
+%
+% That gets used by \mbodybackslash (above).
+%
+% We need to get `macro parameter char #' into several definitions.
+% The technique used is stolen from LaTeX: let \hash be something
+% unexpandable, insert that wherever you need a #, and then redefine
+% it to # just before using the token list produced.
+%
+% The same technique is used to protect \eatspaces till just before
+% the macro is used.
+%
+% If there are 10 or more arguments, a different technique is used, where the
+% hook remains in the body, and when macro is to be expanded the body is
+% processed again to replace the arguments.
+%
+% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
+% argument N value and then \edef  the body (nothing else will expand because of
+% the catcode regime underwhich the body was input).
+%
+% If you compile with TeX (not eTeX), and you have macros with 10 or more
+% arguments, you need that no macro has more than 256 arguments, otherwise an
+% error is produced.
+\def\parsemargdef#1;{%
+  \paramno=0\def\paramlist{}%
+  \let\hash\relax
+  \let\xeatspaces\relax
+  \parsemargdefxxx#1,;,%
+  % In case that there are 10 or more arguments we parse again the arguments
+  % list to set new definitions for the \macarg.BLAH macros corresponding to
+  % each BLAH argument. It was anyhow needed to parse already once this list
+  % in order to count the arguments, and as macros with at most 9 arguments
+  % are by far more frequent than macro with 10 or more arguments, defining
+  % twice the \macarg.BLAH macros does not cost too much processing power.
+  \ifnum\paramno<10\relax\else
+    \paramno0\relax
+    \parsemmanyargdef@@#1,;,% 10 or more arguments
+  \fi
+}
+\def\parsemargdefxxx#1,{%
+  \if#1;\let\next=\relax
+  \else \let\next=\parsemargdefxxx
+    \advance\paramno by 1
+    \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
+        {\xeatspaces{\hash\the\paramno}}%
+    \edef\paramlist{\paramlist\hash\the\paramno,}%
+  \fi\next}
+
+\def\parsemmanyargdef@@#1,{%
+  \if#1;\let\next=\relax
+  \else 
+    \let\next=\parsemmanyargdef@@
+    \edef\tempb{\eatspaces{#1}}%
+    \expandafter\def\expandafter\tempa
+       \expandafter{\csname macarg.\tempb\endcsname}%
+    % Note that we need some extra \noexpand\noexpand, this is because we
+    % don't want \the  to be expanded in the \parsermacbody  as it uses an
+    % \xdef .
+    \expandafter\edef\tempa
+      {\noexpand\noexpand\noexpand\the\toks\the\paramno}%
+    \advance\paramno by 1\relax
+  \fi\next}
+
+% These two commands read recursive and nonrecursive macro bodies.
+% (They're different since rec and nonrec macros end differently.)
+%
+
+\catcode `\@\texiatcatcode
+\long\def\parsemacbody#1@end macro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\long\def\parsermacbody#1@end rmacro%
+{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
+\catcode `\@=11\relax
+
+\let\endargs@\relax
+\let\nil@\relax
+\def\nilm@{\nil@}%
+\long\def\nillm@{\nil@}%
+
+% This macro is expanded during the Texinfo macro expansion, not during its
+% definition.  It gets all the arguments values and assigns them to macros
+% macarg.ARGNAME
+%
+% #1 is the macro name
+% #2 is the list of argument names
+% #3 is the list of argument values
+\def\getargvals@#1#2#3{%
+  \def\macargdeflist@{}%
+  \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion.
+  \def\paramlist{#2,\nil@}%
+  \def\macroname{#1}%
+  \begingroup
+  \macroargctxt
+  \def\argvaluelist{#3,\nil@}%
+  \def\@tempa{#3}%
+  \ifx\@tempa\empty
+    \setemptyargvalues@
+  \else
+    \getargvals@@
+  \fi
+}
+
+% 
+\def\getargvals@@{%
+  \ifx\paramlist\nilm@
+      % Some sanity check needed here that \argvaluelist is also empty.
+      \ifx\argvaluelist\nillm@
+      \else
+        \errhelp = \EMsimple
+        \errmessage{Too many arguments in macro `\macroname'!}%
+      \fi
+      \let\next\macargexpandinbody@
+  \else
+    \ifx\argvaluelist\nillm@
+       % No more arguments values passed to macro.  Set remaining named-arg
+       % macros to empty.
+       \let\next\setemptyargvalues@
+    \else
+      % pop current arg name into \@tempb
+      \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\paramlist}%
+       % pop current argument value into \@tempc
+      \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}%
+      \expandafter\@tempa\expandafter{\argvaluelist}%
+       % Here \@tempb is the current arg name and \@tempc is the current arg value.
+       % First place the new argument macro definition into \@tempd
+       \expandafter\macname\expandafter{\@tempc}%
+       \expandafter\let\csname macarg.\@tempb\endcsname\relax
+       \expandafter\def\expandafter\@tempe\expandafter{%
+         \csname macarg.\@tempb\endcsname}%
+       \edef\@tempd{\long\def\@tempe{\the\macname}}%
+       \push@\@tempd\macargdeflist@
+       \let\next\getargvals@@
+    \fi
+  \fi
+  \next
+}
+
+\def\push@#1#2{%
+  \expandafter\expandafter\expandafter\def
+  \expandafter\expandafter\expandafter#2%
+  \expandafter\expandafter\expandafter{%
+  \expandafter#1#2}%
+}
+
+% Replace arguments by their values in the macro body, and place the result
+% in macro \@tempa
+\def\macvalstoargs@{%
+  %  To do this we use the property that token registers that are \the'ed
+  % within an \edef  expand only once. So we are going to place all argument
+  % values into respective token registers.
+  %
+  % First we save the token context, and initialize argument numbering.
+  \begingroup
+    \paramno0\relax
+    % Then, for each argument number #N, we place the corresponding argument
+    % value into a new token list register \toks#N
+    \expandafter\putargsintokens@\saveparamlist@,;,%
+    % Then, we expand the body so that argument are replaced by their
+    % values. The trick for values not to be expanded themselves is that they
+    % are within tokens and that tokens expand only once in an \edef .
+    \edef\@tempc{\csname mac.\macroname .body\endcsname}%
+    % Now we restore the token stack pointer to free the token list registers
+    % which we have used, but we make sure that expanded body is saved after
+    % group.
+    \expandafter
+  \endgroup
+  \expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
+  }
+
+\def\macargexpandinbody@{% 
+  %% Define the named-macro outside of this group and then close this group. 
+  \expandafter
+  \endgroup
+  \macargdeflist@
+  % First the replace in body the macro arguments by their values, the result
+  % is in \@tempa .
+  \macvalstoargs@
+  % Then we point at the \norecurse or \gobble (for recursive) macro value
+  % with \@tempb .
+  \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname
+  % Depending on whether it is recursive or not, we need some tailing
+  % \egroup .
+  \ifx\@tempb\gobble
+     \let\@tempc\relax
+  \else
+     \let\@tempc\egroup
+  \fi
+  % And now we do the real job:
+  \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}%
+  \@tempd
+}
+
+\def\putargsintokens@#1,{%
+  \if#1;\let\next\relax
+  \else
+    \let\next\putargsintokens@
+    % First we allocate the new token list register, and give it a temporary
+    % alias \@tempb .
+    \toksdef\@tempb\the\paramno
+    % Then we place the argument value into that token list register.
+    \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname
+    \expandafter\@tempb\expandafter{\@tempa}%
+    \advance\paramno by 1\relax
+  \fi
+  \next
+}
+
+% Save the token stack pointer into macro #1
+\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}}
+% Restore the token stack pointer from number in macro #1
+\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax}
+% newtoks that can be used non \outer .
+\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi}
+
+% Tailing missing arguments are set to empty
+\def\setemptyargvalues@{%
+  \ifx\paramlist\nilm@
+    \let\next\macargexpandinbody@
+  \else
+    \expandafter\setemptyargvaluesparser@\paramlist\endargs@
+    \let\next\setemptyargvalues@
+  \fi
+  \next
+}
+
+\def\setemptyargvaluesparser@#1,#2\endargs@{%
+  \expandafter\def\expandafter\@tempa\expandafter{%
+    \expandafter\def\csname macarg.#1\endcsname{}}%
+  \push@\@tempa\macargdeflist@
+  \def\paramlist{#2}%
+}
+
+% #1 is the element target macro
+% #2 is the list macro
+% #3,#4\endargs@ is the list value
+\def\pop@#1#2#3,#4\endargs@{%
+   \def#1{#3}%
+   \def#2{#4}%
+}
+\long\def\longpop@#1#2#3,#4\endargs@{%
+   \long\def#1{#3}%
+   \long\def#2{#4}%
+}
+
+% This defines a Texinfo @macro. There are eight cases: recursive and
+% nonrecursive macros of zero, one, up to nine, and many arguments.
+% Much magic with \expandafter here.
+% \xdef is used so that macro definitions will survive the file
+% they're defined in; @include reads the file inside a group.
+%
+\def\defmacro{%
+  \let\hash=##% convert placeholders to macro parameter chars
+  \ifrecursive
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\scanmacro{\temp}}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+         \egroup\noexpand\scanmacro{\temp}}%
+    \else
+      \ifnum\paramno<10\relax % at most 9
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+          \csname\the\macname xxx\endcsname
+            \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+      \else % 10 or more
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%    
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble
+      \fi
+    \fi
+  \else
+    \ifcase\paramno
+    % 0
+      \expandafter\xdef\csname\the\macname\endcsname{%
+        \noexpand\norecurse{\the\macname}%
+        \noexpand\scanmacro{\temp}\egroup}%
+    \or % 1
+      \expandafter\xdef\csname\the\macname\endcsname{%
+         \bgroup\noexpand\macroargctxt
+         \noexpand\braceorline
+         \expandafter\noexpand\csname\the\macname xxx\endcsname}%
+      \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+        \egroup
+        \noexpand\norecurse{\the\macname}%
+        \noexpand\scanmacro{\temp}\egroup}%
+    \else % at most 9
+      \ifnum\paramno<10\relax
+        \expandafter\xdef\csname\the\macname\endcsname{%
+           \bgroup\noexpand\macroargctxt
+           \expandafter\noexpand\csname\the\macname xx\endcsname}%
+        \expandafter\xdef\csname\the\macname xx\endcsname##1{%
+            \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+        \expandafter\expandafter
+        \expandafter\xdef
+        \expandafter\expandafter
+        \csname\the\macname xxx\endcsname
+        \paramlist{%
+            \egroup
+            \noexpand\norecurse{\the\macname}%
+            \noexpand\scanmacro{\temp}\egroup}%
+      \else % 10 or more:
+        \expandafter\xdef\csname\the\macname\endcsname{%
+          \noexpand\getargvals@{\the\macname}{\argl}%
+        }%
+        \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+        \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse
+      \fi
+    \fi
+  \fi}
+
+\catcode `\@\texiatcatcode\relax
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+% \braceorline decides whether the next nonwhitespace character is a
+% {.  If so it reads up to the closing }, if not, it reads the whole
+% line.  Whatever was read is then fed to the next control sequence
+% as an argument (by \parsebrace or \parsearg).
+% 
+\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+  \ifx\nchar\bgroup\else
+    \expandafter\parsearg
+  \fi \macnamexxx}
+
+
+% @alias.
+% We need some trickery to remove the optional spaces around the equal
+% sign.  Make them active and then expand them all to nothing.
+%
+\def\alias{\parseargusing\obeyspaces\aliasxxx}
+\def\aliasxxx #1{\aliasyyy#1\relax}
+\def\aliasyyy #1=#2\relax{%
+  {%
+    \expandafter\let\obeyedspace=\empty
+    \addtomacrolist{#1}%
+    \xdef\next{\global\let\makecsname{#1}=\makecsname{#2}}%
+  }%
+  \next
+}
+
+
+\message{cross references,}
+
+\newwrite\auxfile
+\newif\ifhavexrefs    % True if xref values are known.
+\newif\ifwarnedxrefs  % True if we warned once that they aren't known.
+
+% @inforef is relatively simple.
+\def\inforef #1{\inforefzzz #1,,,,**}
+\def\inforefzzz #1,#2,#3,#4**{%
+  \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
+  node \samp{\ignorespaces#1{}}}
+
+% @node's only job in TeX is to define \lastnode, which is used in
+% cross-references.  The @node line might or might not have commas, and
+% might or might not have spaces before the first comma, like:
+% @node foo , bar , ...
+% We don't want such trailing spaces in the node name.
+%
+\parseargdef\node{\checkenv{}\donode #1 ,\finishnodeparse}
+%
+% also remove a trailing comma, in case of something like this:
+% @node Help-Cross,  ,  , Cross-refs
+\def\donode#1 ,#2\finishnodeparse{\dodonode #1,\finishnodeparse}
+\def\dodonode#1,#2\finishnodeparse{\gdef\lastnode{#1}}
+
+\let\nwnode=\node
+\let\lastnode=\empty
+
+% Write a cross-reference definition for the current node.  #1 is the
+% type (Ynumbered, Yappendix, Ynothing).
+%
+\def\donoderef#1{%
+  \ifx\lastnode\empty\else
+    \setref{\lastnode}{#1}%
+    \global\let\lastnode=\empty
+  \fi
+}
+
+% @anchor{NAME} -- define xref target at arbitrary point.
+%
+\newcount\savesfregister
+%
+\def\savesf{\relax \ifhmode \savesfregister=\spacefactor \fi}
+\def\restoresf{\relax \ifhmode \spacefactor=\savesfregister \fi}
+\def\anchor#1{\savesf \setref{#1}{Ynothing}\restoresf \ignorespaces}
+
+% \setref{NAME}{SNT} defines a cross-reference point NAME (a node or an
+% anchor), which consists of three parts:
+% 1) NAME-title - the current sectioning name taken from \lastsection,
+%                 or the anchor name.
+% 2) NAME-snt   - section number and type, passed as the SNT arg, or
+%                 empty for anchors.
+% 3) NAME-pg    - the page number.
+%
+% This is called from \donoderef, \anchor, and \dofloat.  In the case of
+% floats, there is an additional part, which is not written here:
+% 4) NAME-lof   - the text as it should appear in a @listoffloats.
+%
+\def\setref#1#2{%
+  \pdfmkdest{#1}%
+  \iflinks
+    {%
+      \atdummies  % preserve commands, but don't expand them
+      \edef\writexrdef##1##2{%
+	\write\auxfile{@xrdef{#1-% #1 of \setref, expanded by the \edef
+	  ##1}{##2}}% these are parameters of \writexrdef
+      }%
+      \toks0 = \expandafter{\lastsection}%
+      \immediate \writexrdef{title}{\the\toks0 }%
+      \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc.
+      \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout
+    }%
+  \fi
+}
+
+% @xrefautosectiontitle on|off says whether @section(ing) names are used
+% automatically in xrefs, if the third arg is not explicitly specified.
+% This was provided as a "secret" @set xref-automatic-section-title
+% variable, now it's official.
+% 
+\parseargdef\xrefautomaticsectiontitle{%
+  \def\temp{#1}%
+  \ifx\temp\onword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \empty
+  \else\ifx\temp\offword
+    \expandafter\let\csname SETxref-automatic-section-title\endcsname
+      = \relax
+  \else
+    \errhelp = \EMsimple
+    \errmessage{Unknown @xrefautomaticsectiontitle value `\temp',
+                must be on|off}%
+  \fi\fi
+}
+
+
+% @xref, @pxref, and @ref generate cross-references.  For \xrefX, #1 is
+% the node name, #2 the name of the Info cross-reference, #3 the printed
+% node name, #4 the name of the Info file, #5 the name of the printed
+% manual.  All but the node name can be omitted.
+%
+\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
+\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
+\def\ref#1{\xrefX[#1,,,,,,,]}
+\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup
+  \unsepspaces
+  \def\printedmanual{\ignorespaces #5}%
+  \def\printedrefname{\ignorespaces #3}%
+  \setbox1=\hbox{\printedmanual\unskip}%
+  \setbox0=\hbox{\printedrefname\unskip}%
+  \ifdim \wd0 = 0pt
+    % No printed node name was explicitly given.
+    \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax
+      % Use the node name inside the square brackets.
+      \def\printedrefname{\ignorespaces #1}%
+    \else
+      % Use the actual chapter/section title appear inside
+      % the square brackets.  Use the real section title if we have it.
+      \ifdim \wd1 > 0pt
+        % It is in another manual, so we don't have it.
+        \def\printedrefname{\ignorespaces #1}%
+      \else
+        \ifhavexrefs
+          % We know the real title if we have the xref values.
+          \def\printedrefname{\refx{#1-title}{}}%
+        \else
+          % Otherwise just copy the Info node name.
+          \def\printedrefname{\ignorespaces #1}%
+        \fi%
+      \fi
+    \fi
+  \fi
+  %
+  % Make link in pdf output.
+  \ifpdf
+    {\indexnofonts
+     \turnoffactive
+     % This expands tokens, so do it after making catcode changes, so _
+     % etc. don't get their TeX definitions.
+     \getfilename{#4}%
+     %
+     % See comments at \activebackslashdouble.
+     {\activebackslashdouble \xdef\pdfxrefdest{#1}%
+      \backslashparens\pdfxrefdest}%
+     %
+     \leavevmode
+     \startlink attr{/Border [0 0 0]}%
+     \ifnum\filenamelength>0
+       goto file{\the\filename.pdf} name{\pdfxrefdest}%
+     \else
+       goto name{\pdfmkpgn{\pdfxrefdest}}%
+     \fi
+    }%
+    \setcolor{\linkcolor}%
+  \fi
+  %
+  % Float references are printed completely differently: "Figure 1.2"
+  % instead of "[somenode], p.3".  We distinguish them by the
+  % LABEL-title being set to a magic string.
+  {%
+    % Have to otherify everything special to allow the \csname to
+    % include an _ in the xref name, etc.
+    \indexnofonts
+    \turnoffactive
+    \expandafter\global\expandafter\let\expandafter\Xthisreftitle
+      \csname XR#1-title\endcsname
+  }%
+  \iffloat\Xthisreftitle
+    % If the user specified the print name (third arg) to the ref,
+    % print it instead of our usual "Figure 1.2".
+    \ifdim\wd0 = 0pt
+      \refx{#1-snt}{}%
+    \else
+      \printedrefname
+    \fi
+    %
+    % if the user also gave the printed manual name (fifth arg), append
+    % "in MANUALNAME".
+    \ifdim \wd1 > 0pt
+      \space \putwordin{} \cite{\printedmanual}%
+    \fi
+  \else
+    % node/anchor (non-float) references.
+    %
+    % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not
+    % insert empty discretionaries after hyphens, which means that it will
+    % not find a line break at a hyphen in a node names.  Since some manuals
+    % are best written with fairly long node names, containing hyphens, this
+    % is a loss.  Therefore, we give the text of the node name again, so it
+    % is as if TeX is seeing it for the first time.
+    \ifdim \wd1 > 0pt
+      \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}%
+    \else
+      % _ (for example) has to be the character _ for the purposes of the
+      % control sequence corresponding to the node, but it has to expand
+      % into the usual \leavevmode...\vrule stuff for purposes of
+      % printing. So we \turnoffactive for the \refx-snt, back on for the
+      % printing, back off for the \refx-pg.
+      {\turnoffactive
+       % Only output a following space if the -snt ref is nonempty; for
+       % @unnumbered and @anchor, it won't be.
+       \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}%
+       \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi
+      }%
+      % output the `[mynode]' via a macro so it can be overridden.
+      \xrefprintnodename\printedrefname
+      %
+      % But we always want a comma and a space:
+      ,\space
+      %
+      % output the `page 3'.
+      \turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+    \fi
+  \fi
+  \endlink
+\endgroup}
+
+% This macro is called from \xrefX for the `[nodename]' part of xref
+% output.  It's a separate macro only so it can be changed more easily,
+% since square brackets don't work well in some documents.  Particularly
+% one that Bob is working on :).
+%
+\def\xrefprintnodename#1{[#1]}
+
+% Things referred to by \setref.
+%
+\def\Ynothing{}
+\def\Yomitfromtoc{}
+\def\Ynumbered{%
+  \ifnum\secno=0
+    \putwordChapter@tie \the\chapno
+  \else \ifnum\subsecno=0
+    \putwordSection@tie \the\chapno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie \the\chapno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+\def\Yappendix{%
+  \ifnum\secno=0
+     \putwordAppendix@tie @char\the\appendixno{}%
+  \else \ifnum\subsecno=0
+     \putwordSection@tie @char\the\appendixno.\the\secno
+  \else \ifnum\subsubsecno=0
+    \putwordSection@tie @char\the\appendixno.\the\secno.\the\subsecno
+  \else
+    \putwordSection@tie
+      @char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno
+  \fi\fi\fi
+}
+
+% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME.
+% If its value is nonempty, SUFFIX is output afterward.
+%
+\def\refx#1#2{%
+  {%
+    \indexnofonts
+    \otherbackslash
+    \expandafter\global\expandafter\let\expandafter\thisrefX
+      \csname XR#1\endcsname
+  }%
+  \ifx\thisrefX\relax
+    % If not defined, say something at least.
+    \angleleft un\-de\-fined\angleright
+    \iflinks
+      \ifhavexrefs
+        {\toks0 = {#1}% avoid expansion of possibly-complex value
+         \message{\linenumber Undefined cross reference `\the\toks0'.}}%
+      \else
+        \ifwarnedxrefs\else
+          \global\warnedxrefstrue
+          \message{Cross reference values unknown; you must run TeX again.}%
+        \fi
+      \fi
+    \fi
+  \else
+    % It's defined, so just use it.
+    \thisrefX
+  \fi
+  #2% Output the suffix in any case.
+}
+
+% This is the macro invoked by entries in the aux file.  Usually it's
+% just a \def (we prepend XR to the control sequence name to avoid
+% collisions).  But if this is a float type, we have more work to do.
+%
+\def\xrdef#1#2{%
+  {% The node name might contain 8-bit characters, which in our current
+   % implementation are changed to commands like @'e.  Don't let these
+   % mess up the control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safexrefname{#1}%
+  }%
+  %
+  \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
+  %
+  % Was that xref control sequence that we just defined for a float?
+  \expandafter\iffloat\csname XR\safexrefname\endcsname
+    % it was a float, and we have the (safe) float type in \iffloattype.
+    \expandafter\let\expandafter\floatlist
+      \csname floatlist\iffloattype\endcsname
+    %
+    % Is this the first time we've seen this float type?
+    \expandafter\ifx\floatlist\relax
+      \toks0 = {\do}% yes, so just \do
+    \else
+      % had it before, so preserve previous elements in list.
+      \toks0 = \expandafter{\floatlist\do}%
+    \fi
+    %
+    % Remember this xref in the control sequence \floatlistFLOATTYPE,
+    % for later use in \listoffloats.
+    \expandafter\xdef\csname floatlist\iffloattype\endcsname{\the\toks0
+      {\safexrefname}}%
+  \fi
+}
+
+% Read the last existing aux file, if any.  No error if none exists.
+%
+\def\tryauxfile{%
+  \openin 1 \jobname.aux
+  \ifeof 1 \else
+    \readdatafile{aux}%
+    \global\havexrefstrue
+  \fi
+  \closein 1
+}
+
+\def\setupdatafile{%
+  \catcode`\^^@=\other
+  \catcode`\^^A=\other
+  \catcode`\^^B=\other
+  \catcode`\^^C=\other
+  \catcode`\^^D=\other
+  \catcode`\^^E=\other
+  \catcode`\^^F=\other
+  \catcode`\^^G=\other
+  \catcode`\^^H=\other
+  \catcode`\^^K=\other
+  \catcode`\^^L=\other
+  \catcode`\^^N=\other
+  \catcode`\^^P=\other
+  \catcode`\^^Q=\other
+  \catcode`\^^R=\other
+  \catcode`\^^S=\other
+  \catcode`\^^T=\other
+  \catcode`\^^U=\other
+  \catcode`\^^V=\other
+  \catcode`\^^W=\other
+  \catcode`\^^X=\other
+  \catcode`\^^Z=\other
+  \catcode`\^^[=\other
+  \catcode`\^^\=\other
+  \catcode`\^^]=\other
+  \catcode`\^^^=\other
+  \catcode`\^^_=\other
+  % It was suggested to set the catcode of ^ to 7, which would allow ^^e4 etc.
+  % in xref tags, i.e., node names.  But since ^^e4 notation isn't
+  % supported in the main text, it doesn't seem desirable.  Furthermore,
+  % that is not enough: for node names that actually contain a ^
+  % character, we would end up writing a line like this: 'xrdef {'hat
+  % b-title}{'hat b} and \xrdef does a \csname...\endcsname on the first
+  % argument, and \hat is not an expandable control sequence.  It could
+  % all be worked out, but why?  Either we support ^^ or we don't.
+  %
+  % The other change necessary for this was to define \auxhat:
+  % \def\auxhat{\def^{'hat }}% extra space so ok if followed by letter
+  % and then to call \auxhat in \setq.
+  %
+  \catcode`\^=\other
+  %
+  % Special characters.  Should be turned off anyway, but...
+  \catcode`\~=\other
+  \catcode`\[=\other
+  \catcode`\]=\other
+  \catcode`\"=\other
+  \catcode`\_=\other
+  \catcode`\|=\other
+  \catcode`\<=\other
+  \catcode`\>=\other
+  \catcode`\$=\other
+  \catcode`\#=\other
+  \catcode`\&=\other
+  \catcode`\%=\other
+  \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
+  %
+  % This is to support \ in node names and titles, since the \
+  % characters end up in a \csname.  It's easier than
+  % leaving it active and making its active definition an actual \
+  % character.  What I don't understand is why it works in the *value*
+  % of the xrdef.  Seems like it should be a catcode12 \, and that
+  % should not typeset properly.  But it works, so I'm moving on for
+  % now.  --karl, 15jan04.
+  \catcode`\\=\other
+  %
+  % Make the characters 128-255 be printing characters.
+  {%
+    \count1=128
+    \def\loop{%
+      \catcode\count1=\other
+      \advance\count1 by 1
+      \ifnum \count1<256 \loop \fi
+    }%
+  }%
+  %
+  % @ is our escape character in .aux files, and we need braces.
+  \catcode`\{=1
+  \catcode`\}=2
+  \catcode`\@=0
+}
+
+\def\readdatafile#1{%
+\begingroup
+  \setupdatafile
+  \input\jobname.#1
+\endgroup}
+
+
+\message{insertions,}
+% including footnotes.
+
+\newcount \footnoteno
+
+% The trailing space in the following definition for supereject is
+% vital for proper filling; pages come out unaligned when you do a
+% pagealignmacro call if that space before the closing brace is
+% removed. (Generally, numeric constants should always be followed by a
+% space to prevent strange expansion errors.)
+\def\supereject{\par\penalty -20000\footnoteno =0 }
+
+% @footnotestyle is meaningful for info output only.
+\let\footnotestyle=\comment
+
+{\catcode `\@=11
+%
+% Auto-number footnotes.  Otherwise like plain.
+\gdef\footnote{%
+  \let\indent=\ptexindent
+  \let\noindent=\ptexnoindent
+  \global\advance\footnoteno by \@ne
+  \edef\thisfootno{$^{\the\footnoteno}$}%
+  %
+  % In case the footnote comes at the end of a sentence, preserve the
+  % extra spacing after we do the footnote number.
+  \let\@sf\empty
+  \ifhmode\edef\@sf{\spacefactor\the\spacefactor}\ptexslash\fi
+  %
+  % Remove inadvertent blank space before typesetting the footnote number.
+  \unskip
+  \thisfootno\@sf
+  \dofootnote
+}%
+
+% Don't bother with the trickery in plain.tex to not require the
+% footnote text as a parameter.  Our footnotes don't need to be so general.
+%
+% Oh yes, they do; otherwise, @ifset (and anything else that uses
+% \parseargline) fails inside footnotes because the tokens are fixed when
+% the footnote is read.  --karl, 16nov96.
+%
+\gdef\dofootnote{%
+  \insert\footins\bgroup
+  % We want to typeset this text as a normal paragraph, even if the
+  % footnote reference occurs in (for example) a display environment.
+  % So reset some parameters.
+  \hsize=\pagewidth
+  \interlinepenalty\interfootnotelinepenalty
+  \splittopskip\ht\strutbox % top baseline for broken footnotes
+  \splitmaxdepth\dp\strutbox
+  \floatingpenalty\@MM
+  \leftskip\z@skip
+  \rightskip\z@skip
+  \spaceskip\z@skip
+  \xspaceskip\z@skip
+  \parindent\defaultparindent
+  %
+  \smallfonts \rm
+  %
+  % Because we use hanging indentation in footnotes, a @noindent appears
+  % to exdent this text, so make it be a no-op.  makeinfo does not use
+  % hanging indentation so @noindent can still be needed within footnote
+  % text after an @example or the like (not that this is good style).
+  \let\noindent = \relax
+  %
+  % Hang the footnote text off the number.  Use \everypar in case the
+  % footnote extends for more than one paragraph.
+  \everypar = {\hang}%
+  \textindent{\thisfootno}%
+  %
+  % Don't crash into the line above the footnote text.  Since this
+  % expands into a box, it must come within the paragraph, lest it
+  % provide a place where TeX can split the footnote.
+  \footstrut
+  \futurelet\next\fo@t
+}
+}%end \catcode `\@=11
+
+% In case a @footnote appears in a vbox, save the footnote text and create
+% the real \insert just after the vbox finished.  Otherwise, the insertion
+% would be lost.
+% Similarly, if a @footnote appears inside an alignment, save the footnote
+% text to a box and make the \insert when a row of the table is finished.
+% And the same can be done for other insert classes.  --kasal, 16nov03.
+
+% Replace the \insert primitive by a cheating macro.
+% Deeper inside, just make sure that the saved insertions are not spilled
+% out prematurely.
+%
+\def\startsavinginserts{%
+  \ifx \insert\ptexinsert
+    \let\insert\saveinsert
+  \else
+    \let\checkinserts\relax
+  \fi
+}
+
+% This \insert replacement works for both \insert\footins{foo} and
+% \insert\footins\bgroup foo\egroup, but it doesn't work for \insert27{foo}.
+%
+\def\saveinsert#1{%
+  \edef\next{\noexpand\savetobox \makeSAVEname#1}%
+  \afterassignment\next
+  % swallow the left brace
+  \let\temp =
+}
+\def\makeSAVEname#1{\makecsname{SAVE\expandafter\gobble\string#1}}
+\def\savetobox#1{\global\setbox#1 = \vbox\bgroup \unvbox#1}
+
+\def\checksaveins#1{\ifvoid#1\else \placesaveins#1\fi}
+
+\def\placesaveins#1{%
+  \ptexinsert \csname\expandafter\gobblesave\string#1\endcsname
+    {\box#1}%
+}
+
+% eat @SAVE -- beware, all of them have catcode \other:
+{
+  \def\dospecials{\do S\do A\do V\do E} \uncatcodespecials  %  ;-)
+  \gdef\gobblesave @SAVE{}
+}
+
+% initialization:
+\def\newsaveins #1{%
+  \edef\next{\noexpand\newsaveinsX \makeSAVEname#1}%
+  \next
+}
+\def\newsaveinsX #1{%
+  \csname newbox\endcsname #1%
+  \expandafter\def\expandafter\checkinserts\expandafter{\checkinserts
+    \checksaveins #1}%
+}
+
+% initialize:
+\let\checkinserts\empty
+\newsaveins\footins
+\newsaveins\margin
+
+
+% @image.  We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front.  If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+  % Do not bother showing banner with epsf.tex v2.7k (available in
+  % doc/epsf.tex and on ctan).
+  \def\epsfannounce{\toks0 = }%
+  \input epsf.tex
+\fi
+\closein 1
+%
+% We will only complain once about lack of epsf.tex.
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+  work.  It is also included in the Texinfo distribution, or you can get
+  it from ftp://tug.org/tex/epsf.tex.}
+%
+\def\image#1{%
+  \ifx\epsfbox\thisiundefined
+    \ifwarnednoepsf \else
+      \errhelp = \noepsfhelp
+      \errmessage{epsf.tex not found, images will be ignored}%
+      \global\warnednoepsftrue
+    \fi
+  \else
+    \imagexxx #1,,,,,\finish
+  \fi
+}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is (ignored optional) html alt text.
+% #5 is (ignored optional) extension.
+% #6 is just the usual extra ignored arg for parsing stuff.
+\newif\ifimagevmode
+\def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup
+  \catcode`\^^M = 5     % in case we're inside an example
+  \normalturnoffactive  % allow _ et al. in names
+  % If the image is by itself, center it.
+  \ifvmode
+    \imagevmodetrue
+    \nobreak\medskip
+    % Usually we'll have text after the image which will insert
+    % \parskip glue, so insert it here too to equalize the space
+    % above and below.
+    \nobreak\vskip\parskip
+    \nobreak
+  \fi
+  %
+  % Leave vertical mode so that indentation from an enclosing
+  % environment such as @quotation is respected.  On the other hand, if
+  % it's at the top level, we don't want the normal paragraph indentation.
+  \noindent
+  %
+  % Output the image.
+  \ifpdf
+    \dopdfimage{#1}{#2}{#3}%
+  \else
+    % \epsfbox itself resets \epsf?size at each figure.
+    \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+    \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+    \epsfbox{#1.eps}%
+  \fi
+  %
+  \ifimagevmode \medskip \fi  % space after the standalone image
+\endgroup}
+
+
+% @float FLOATTYPE,LABEL,LOC ... @end float for displayed figures, tables,
+% etc.  We don't actually implement floating yet, we always include the
+% float "here".  But it seemed the best name for the future.
+%
+\envparseargdef\float{\eatcommaspace\eatcommaspace\dofloat#1, , ,\finish}
+
+% There may be a space before second and/or third parameter; delete it.
+\def\eatcommaspace#1, {#1,}
+
+% #1 is the optional FLOATTYPE, the text label for this float, typically
+% "Figure", "Table", "Example", etc.  Can't contain commas.  If omitted,
+% this float will not be numbered and cannot be referred to.
+%
+% #2 is the optional xref label.  Also must be present for the float to
+% be referable.
+%
+% #3 is the optional positioning argument; for now, it is ignored.  It
+% will somehow specify the positions allowed to float to (here, top, bottom).
+%
+% We keep a separate counter for each FLOATTYPE, which we reset at each
+% chapter-level command.
+\let\resetallfloatnos=\empty
+%
+\def\dofloat#1,#2,#3,#4\finish{%
+  \let\thiscaption=\empty
+  \let\thisshortcaption=\empty
+  %
+  % don't lose footnotes inside @float.
+  %
+  % BEWARE: when the floats start float, we have to issue warning whenever an
+  % insert appears inside a float which could possibly float. --kasal, 26may04
+  %
+  \startsavinginserts
+  %
+  % We can't be used inside a paragraph.
+  \par
+  %
+  \vtop\bgroup
+    \def\floattype{#1}%
+    \def\floatlabel{#2}%
+    \def\floatloc{#3}% we do nothing with this yet.
+    %
+    \ifx\floattype\empty
+      \let\safefloattype=\empty
+    \else
+      {%
+        % the floattype might have accents or other special characters,
+        % but we need to use it in a control sequence name.
+        \indexnofonts
+        \turnoffactive
+        \xdef\safefloattype{\floattype}%
+      }%
+    \fi
+    %
+    % If label is given but no type, we handle that as the empty type.
+    \ifx\floatlabel\empty \else
+      % We want each FLOATTYPE to be numbered separately (Figure 1,
+      % Table 1, Figure 2, ...).  (And if no label, no number.)
+      %
+      \expandafter\getfloatno\csname\safefloattype floatno\endcsname
+      \global\advance\floatno by 1
+      %
+      {%
+        % This magic value for \lastsection is output by \setref as the
+        % XREFLABEL-title value.  \xrefX uses it to distinguish float
+        % labels (which have a completely different output format) from
+        % node and anchor labels.  And \xrdef uses it to construct the
+        % lists of floats.
+        %
+        \edef\lastsection{\floatmagic=\safefloattype}%
+        \setref{\floatlabel}{Yfloat}%
+      }%
+    \fi
+    %
+    % start with \parskip glue, I guess.
+    \vskip\parskip
+    %
+    % Don't suppress indentation if a float happens to start a section.
+    \restorefirstparagraphindent
+}
+
+% we have these possibilities:
+% @float Foo,lbl & @caption{Cap}: Foo 1.1: Cap
+% @float Foo,lbl & no caption:    Foo 1.1
+% @float Foo & @caption{Cap}:     Foo: Cap
+% @float Foo & no caption:        Foo
+% @float ,lbl & Caption{Cap}:     1.1: Cap
+% @float ,lbl & no caption:       1.1
+% @float & @caption{Cap}:         Cap
+% @float & no caption:
+%
+\def\Efloat{%
+    \let\floatident = \empty
+    %
+    % In all cases, if we have a float type, it comes first.
+    \ifx\floattype\empty \else \def\floatident{\floattype}\fi
+    %
+    % If we have an xref label, the number comes next.
+    \ifx\floatlabel\empty \else
+      \ifx\floattype\empty \else % if also had float type, need tie first.
+        \appendtomacro\floatident{\tie}%
+      \fi
+      % the number.
+      \appendtomacro\floatident{\chaplevelprefix\the\floatno}%
+    \fi
+    %
+    % Start the printed caption with what we've constructed in
+    % \floatident, but keep it separate; we need \floatident again.
+    \let\captionline = \floatident
+    %
+    \ifx\thiscaption\empty \else
+      \ifx\floatident\empty \else
+	\appendtomacro\captionline{: }% had ident, so need a colon between
+      \fi
+      %
+      % caption text.
+      \appendtomacro\captionline{\scanexp\thiscaption}%
+    \fi
+    %
+    % If we have anything to print, print it, with space before.
+    % Eventually this needs to become an \insert.
+    \ifx\captionline\empty \else
+      \vskip.5\parskip
+      \captionline
+      %
+      % Space below caption.
+      \vskip\parskip
+    \fi
+    %
+    % If have an xref label, write the list of floats info.  Do this
+    % after the caption, to avoid chance of it being a breakpoint.
+    \ifx\floatlabel\empty \else
+      % Write the text that goes in the lof to the aux file as
+      % \floatlabel-lof.  Besides \floatident, we include the short
+      % caption if specified, else the full caption if specified, else nothing.
+      {%
+        \atdummies
+        %
+        % since we read the caption text in the macro world, where ^^M
+        % is turned into a normal character, we have to scan it back, so
+        % we don't write the literal three characters "^^M" into the aux file.
+	\scanexp{%
+	  \xdef\noexpand\gtemp{%
+	    \ifx\thisshortcaption\empty
+	      \thiscaption
+	    \else
+	      \thisshortcaption
+	    \fi
+	  }%
+	}%
+        \immediate\write\auxfile{@xrdef{\floatlabel-lof}{\floatident
+	  \ifx\gtemp\empty \else : \gtemp \fi}}%
+      }%
+    \fi
+  \egroup  % end of \vtop
+  %
+  % place the captured inserts
+  %
+  % BEWARE: when the floats start floating, we have to issue warning
+  % whenever an insert appears inside a float which could possibly
+  % float. --kasal, 26may04
+  %
+  \checkinserts
+}
+
+% Append the tokens #2 to the definition of macro #1, not expanding either.
+%
+\def\appendtomacro#1#2{%
+  \expandafter\def\expandafter#1\expandafter{#1#2}%
+}
+
+% @caption, @shortcaption
+%
+\def\caption{\docaption\thiscaption}
+\def\shortcaption{\docaption\thisshortcaption}
+\def\docaption{\checkenv\float \bgroup\scanargctxt\defcaption}
+\def\defcaption#1#2{\egroup \def#1{#2}}
+
+% The parameter is the control sequence identifying the counter we are
+% going to use.  Create it if it doesn't exist and assign it to \floatno.
+\def\getfloatno#1{%
+  \ifx#1\relax
+      % Haven't seen this figure type before.
+      \csname newcount\endcsname #1%
+      %
+      % Remember to reset this floatno at the next chap.
+      \expandafter\gdef\expandafter\resetallfloatnos
+        \expandafter{\resetallfloatnos #1=0 }%
+  \fi
+  \let\floatno#1%
+}
+
+% \setref calls this to get the XREFLABEL-snt value.  We want an @xref
+% to the FLOATLABEL to expand to "Figure 3.1".  We call \setref when we
+% first read the @float command.
+%
+\def\Yfloat{\floattype@tie \chaplevelprefix\the\floatno}%
+
+% Magic string used for the XREFLABEL-title value, so \xrefX can
+% distinguish floats from other xref types.
+\def\floatmagic{!!float!!}
+
+% #1 is the control sequence we are passed; we expand into a conditional
+% which is true if #1 represents a float ref.  That is, the magic
+% \lastsection value which we \setref above.
+%
+\def\iffloat#1{\expandafter\doiffloat#1==\finish}
+%
+% #1 is (maybe) the \floatmagic string.  If so, #2 will be the
+% (safe) float type for this float.  We set \iffloattype to #2.
+%
+\def\doiffloat#1=#2=#3\finish{%
+  \def\temp{#1}%
+  \def\iffloattype{#2}%
+  \ifx\temp\floatmagic
+}
+
+% @listoffloats FLOATTYPE - print a list of floats like a table of contents.
+%
+\parseargdef\listoffloats{%
+  \def\floattype{#1}% floattype
+  {%
+    % the floattype might have accents or other special characters,
+    % but we need to use it in a control sequence name.
+    \indexnofonts
+    \turnoffactive
+    \xdef\safefloattype{\floattype}%
+  }%
+  %
+  % \xrdef saves the floats as a \do-list in \floatlistSAFEFLOATTYPE.
+  \expandafter\ifx\csname floatlist\safefloattype\endcsname \relax
+    \ifhavexrefs
+      % if the user said @listoffloats foo but never @float foo.
+      \message{\linenumber No `\safefloattype' floats to list.}%
+    \fi
+  \else
+    \begingroup
+      \leftskip=\tocindent  % indent these entries like a toc
+      \let\do=\listoffloatsdo
+      \csname floatlist\safefloattype\endcsname
+    \endgroup
+  \fi
+}
+
+% This is called on each entry in a list of floats.  We're passed the
+% xref label, in the form LABEL-title, which is how we save it in the
+% aux file.  We strip off the -title and look up \XRLABEL-lof, which
+% has the text we're supposed to typeset here.
+%
+% Figures without xref labels will not be included in the list (since
+% they won't appear in the aux file).
+%
+\def\listoffloatsdo#1{\listoffloatsdoentry#1\finish}
+\def\listoffloatsdoentry#1-title\finish{{%
+  % Can't fully expand XR#1-lof because it can contain anything.  Just
+  % pass the control sequence.  On the other hand, XR#1-pg is just the
+  % page number, and we want to fully expand that so we can get a link
+  % in pdf output.
+  \toksA = \expandafter{\csname XR#1-lof\endcsname}%
+  %
+  % use the same \entry macro we use to generate the TOC and index.
+  \edef\writeentry{\noexpand\entry{\the\toksA}{\csname XR#1-pg\endcsname}}%
+  \writeentry
+}}
+
+
+\message{localization,}
+
+% For single-language documents, @documentlanguage is usually given very
+% early, just after @documentencoding.  Single argument is the language
+% (de) or locale (de_DE) abbreviation.
+%
+{
+  \catcode`\_ = \active
+  \globaldefs=1
+\parseargdef\documentlanguage{\begingroup
+  \let_=\normalunderscore  % normal _ character for filenames
+  \tex % read txi-??.tex file in plain TeX.
+    % Read the file by the name they passed if it exists.
+    \openin 1 txi-#1.tex
+    \ifeof 1
+      \documentlanguagetrywithoutunderscore{#1_\finish}%
+    \else
+      \globaldefs = 1  % everything in the txi-LL files needs to persist
+      \input txi-#1.tex
+    \fi
+    \closein 1
+  \endgroup % end raw TeX
+\endgroup}
+%
+% If they passed de_DE, and txi-de_DE.tex doesn't exist,
+% try txi-de.tex.
+%
+\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{%
+  \openin 1 txi-#1.tex
+  \ifeof 1
+    \errhelp = \nolanghelp
+    \errmessage{Cannot read language file txi-#1.tex}%
+  \else
+    \globaldefs = 1  % everything in the txi-LL files needs to persist
+    \input txi-#1.tex
+  \fi
+  \closein 1
+}
+}% end of special _ catcode
+%
+\newhelp\nolanghelp{The given language definition file cannot be found or
+is empty.  Maybe you need to install it?  Putting it in the current
+directory should work if nowhere else does.}
+
+% This macro is called from txi-??.tex files; the first argument is the
+% \language name to set (without the "\lang@" prefix), the second and
+% third args are \{left,right}hyphenmin.
+%
+% The language names to pass are determined when the format is built.
+% See the etex.log file created at that time, e.g.,
+% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log.
+%
+% With TeX Live 2008, etex now includes hyphenation patterns for all
+% available languages.  This means we can support hyphenation in
+% Texinfo, at least to some extent.  (This still doesn't solve the
+% accented characters problem.)
+%
+\catcode`@=11
+\def\txisetlanguage#1#2#3{%
+  % do not set the language if the name is undefined in the current TeX.
+  \expandafter\ifx\csname lang@#1\endcsname \relax
+    \message{no patterns for #1}%
+  \else
+    \global\language = \csname lang@#1\endcsname
+  \fi
+  % but there is no harm in adjusting the hyphenmin values regardless.
+  \global\lefthyphenmin = #2\relax
+  \global\righthyphenmin = #3\relax
+}
+
+% Helpers for encodings.
+% Set the catcode of characters 128 through 255 to the specified number.
+%
+\def\setnonasciicharscatcode#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \global\catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+\def\setnonasciicharscatcodenonglobal#1{%
+   \count255=128
+   \loop\ifnum\count255<256
+      \catcode\count255=#1\relax
+      \advance\count255 by 1
+   \repeat
+}
+
+% @documentencoding sets the definition of non-ASCII characters
+% according to the specified encoding.
+%
+\parseargdef\documentencoding{%
+  % Encoding being declared for the document.
+  \def\declaredencoding{\csname #1.enc\endcsname}%
+  %
+  % Supported encodings: names converted to tokens in order to be able
+  % to compare them with \ifx.
+  \def\ascii{\csname US-ASCII.enc\endcsname}%
+  \def\latnine{\csname ISO-8859-15.enc\endcsname}%
+  \def\latone{\csname ISO-8859-1.enc\endcsname}%
+  \def\lattwo{\csname ISO-8859-2.enc\endcsname}%
+  \def\utfeight{\csname UTF-8.enc\endcsname}%
+  %
+  \ifx \declaredencoding \ascii
+     \asciichardefs
+  %
+  \else \ifx \declaredencoding \lattwo
+     \setnonasciicharscatcode\active
+     \lattwochardefs
+  %
+  \else \ifx \declaredencoding \latone
+     \setnonasciicharscatcode\active
+     \latonechardefs
+  %
+  \else \ifx \declaredencoding \latnine
+     \setnonasciicharscatcode\active
+     \latninechardefs
+  %
+  \else \ifx \declaredencoding \utfeight
+     \setnonasciicharscatcode\active
+     \utfeightchardefs
+  %
+  \else
+    \message{Unknown document encoding #1, ignoring.}%
+  %
+  \fi % utfeight
+  \fi % latnine
+  \fi % latone
+  \fi % lattwo
+  \fi % ascii
+}
+
+% A message to be logged when using a character that isn't available
+% the default font encoding (OT1).
+%
+\def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}}
+
+% Take account of \c (plain) vs. \, (Texinfo) difference.
+\def\cedilla#1{\ifx\c\ptexc\c{#1}\else\,{#1}\fi}
+
+% First, make active non-ASCII characters in order for them to be
+% correctly categorized when TeX reads the replacement text of
+% macros containing the character definitions.
+\setnonasciicharscatcode\active
+%
+% Latin1 (ISO-8859-1) character definitions.
+\def\latonechardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\exclamdown}
+  \gdef^^a2{\missingcharmsg{CENT SIGN}}
+  \gdef^^a3{{\pounds}}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\missingcharmsg{YEN SIGN}}
+  \gdef^^a6{\missingcharmsg{BROKEN BAR}}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\copyright}
+  \gdef^^aa{\ordf}
+  \gdef^^ab{\guillemetleft}
+  \gdef^^ac{$\lnot$}
+  \gdef^^ad{\-}
+  \gdef^^ae{\registeredsymbol}
+  \gdef^^af{\={}}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{$\pm$}
+  \gdef^^b2{$^2$}
+  \gdef^^b3{$^3$}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{$\mu$}
+  \gdef^^b6{\P}
+  %
+  \gdef^^b7{$^.$}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{$^1$}
+  \gdef^^ba{\ordm}
+  %
+  \gdef^^bb{\guillemetright}
+  \gdef^^bc{$1\over4$}
+  \gdef^^bd{$1\over2$}
+  \gdef^^be{$3\over4$}
+  \gdef^^bf{\questiondown}
+  %
+  \gdef^^c0{\`A}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\~A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\ringaccent A}
+  \gdef^^c6{\AE}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\`E}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\^E}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\`I}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\"I}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\~N}
+  \gdef^^d2{\`O}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\~O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\O}
+  \gdef^^d9{\`U}
+  \gdef^^da{\'U}
+  \gdef^^db{\^U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\TH}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\`a}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\~a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\ringaccent a}
+  \gdef^^e6{\ae}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\`e}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\^e}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\`{\dotless i}}
+  \gdef^^ed{\'{\dotless i}}
+  \gdef^^ee{\^{\dotless i}}
+  \gdef^^ef{\"{\dotless i}}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\~n}
+  \gdef^^f2{\`o}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\~o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\o}
+  \gdef^^f9{\`u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\^u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\th}
+  \gdef^^ff{\"y}
+}
+
+% Latin9 (ISO-8859-15) encoding character definitions.
+\def\latninechardefs{%
+  % Encoding is almost identical to Latin1.
+  \latonechardefs
+  %
+  \gdef^^a4{\euro}
+  \gdef^^a6{\v S}
+  \gdef^^a8{\v s}
+  \gdef^^b4{\v Z}
+  \gdef^^b8{\v z}
+  \gdef^^bc{\OE}
+  \gdef^^bd{\oe}
+  \gdef^^be{\"Y}
+}
+
+% Latin2 (ISO-8859-2) character definitions.
+\def\lattwochardefs{%
+  \gdef^^a0{\tie}
+  \gdef^^a1{\ogonek{A}}
+  \gdef^^a2{\u{}}
+  \gdef^^a3{\L}
+  \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
+  \gdef^^a5{\v L}
+  \gdef^^a6{\'S}
+  \gdef^^a7{\S}
+  \gdef^^a8{\"{}}
+  \gdef^^a9{\v S}
+  \gdef^^aa{\cedilla S}
+  \gdef^^ab{\v T}
+  \gdef^^ac{\'Z}
+  \gdef^^ad{\-}
+  \gdef^^ae{\v Z}
+  \gdef^^af{\dotaccent Z}
+  %
+  \gdef^^b0{\textdegree}
+  \gdef^^b1{\ogonek{a}}
+  \gdef^^b2{\ogonek{ }}
+  \gdef^^b3{\l}
+  \gdef^^b4{\'{}}
+  \gdef^^b5{\v l}
+  \gdef^^b6{\'s}
+  \gdef^^b7{\v{}}
+  \gdef^^b8{\cedilla\ }
+  \gdef^^b9{\v s}
+  \gdef^^ba{\cedilla s}
+  \gdef^^bb{\v t}
+  \gdef^^bc{\'z}
+  \gdef^^bd{\H{}}
+  \gdef^^be{\v z}
+  \gdef^^bf{\dotaccent z}
+  %
+  \gdef^^c0{\'R}
+  \gdef^^c1{\'A}
+  \gdef^^c2{\^A}
+  \gdef^^c3{\u A}
+  \gdef^^c4{\"A}
+  \gdef^^c5{\'L}
+  \gdef^^c6{\'C}
+  \gdef^^c7{\cedilla C}
+  \gdef^^c8{\v C}
+  \gdef^^c9{\'E}
+  \gdef^^ca{\ogonek{E}}
+  \gdef^^cb{\"E}
+  \gdef^^cc{\v E}
+  \gdef^^cd{\'I}
+  \gdef^^ce{\^I}
+  \gdef^^cf{\v D}
+  %
+  \gdef^^d0{\DH}
+  \gdef^^d1{\'N}
+  \gdef^^d2{\v N}
+  \gdef^^d3{\'O}
+  \gdef^^d4{\^O}
+  \gdef^^d5{\H O}
+  \gdef^^d6{\"O}
+  \gdef^^d7{$\times$}
+  \gdef^^d8{\v R}
+  \gdef^^d9{\ringaccent U}
+  \gdef^^da{\'U}
+  \gdef^^db{\H U}
+  \gdef^^dc{\"U}
+  \gdef^^dd{\'Y}
+  \gdef^^de{\cedilla T}
+  \gdef^^df{\ss}
+  %
+  \gdef^^e0{\'r}
+  \gdef^^e1{\'a}
+  \gdef^^e2{\^a}
+  \gdef^^e3{\u a}
+  \gdef^^e4{\"a}
+  \gdef^^e5{\'l}
+  \gdef^^e6{\'c}
+  \gdef^^e7{\cedilla c}
+  \gdef^^e8{\v c}
+  \gdef^^e9{\'e}
+  \gdef^^ea{\ogonek{e}}
+  \gdef^^eb{\"e}
+  \gdef^^ec{\v e}
+  \gdef^^ed{\'{\dotless{i}}}
+  \gdef^^ee{\^{\dotless{i}}}
+  \gdef^^ef{\v d}
+  %
+  \gdef^^f0{\dh}
+  \gdef^^f1{\'n}
+  \gdef^^f2{\v n}
+  \gdef^^f3{\'o}
+  \gdef^^f4{\^o}
+  \gdef^^f5{\H o}
+  \gdef^^f6{\"o}
+  \gdef^^f7{$\div$}
+  \gdef^^f8{\v r}
+  \gdef^^f9{\ringaccent u}
+  \gdef^^fa{\'u}
+  \gdef^^fb{\H u}
+  \gdef^^fc{\"u}
+  \gdef^^fd{\'y}
+  \gdef^^fe{\cedilla t}
+  \gdef^^ff{\dotaccent{}}
+}
+
+% UTF-8 character definitions.
+%
+% This code to support UTF-8 is based on LaTeX's utf8.def, with some
+% changes for Texinfo conventions.  It is included here under the GPL by
+% permission from Frank Mittelbach and the LaTeX team.
+%
+\newcount\countUTFx
+\newcount\countUTFy
+\newcount\countUTFz
+
+\gdef\UTFviiiTwoOctets#1#2{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\endcsname}
+%
+\gdef\UTFviiiThreeOctets#1#2#3{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\endcsname}
+%
+\gdef\UTFviiiFourOctets#1#2#3#4{\expandafter
+   \UTFviiiDefined\csname u8:#1\string #2\string #3\string #4\endcsname}
+
+\gdef\UTFviiiDefined#1{%
+  \ifx #1\relax
+    \message{\linenumber Unicode char \string #1 not defined for Texinfo}%
+  \else
+    \expandafter #1%
+  \fi
+}
+
+\begingroup
+  \catcode`\~13
+  \catcode`\"12
+
+  \def\UTFviiiLoop{%
+    \global\catcode\countUTFx\active
+    \uccode`\~\countUTFx
+    \uppercase\expandafter{\UTFviiiTmp}%
+    \advance\countUTFx by 1
+    \ifnum\countUTFx < \countUTFy
+      \expandafter\UTFviiiLoop
+    \fi}
+
+  \countUTFx = "C2
+  \countUTFy = "E0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiTwoOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "E0
+  \countUTFy = "F0
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiThreeOctets\string~}}
+  \UTFviiiLoop
+
+  \countUTFx = "F0
+  \countUTFy = "F4
+  \def\UTFviiiTmp{%
+    \xdef~{\noexpand\UTFviiiFourOctets\string~}}
+  \UTFviiiLoop
+\endgroup
+
+\begingroup
+  \catcode`\"=12
+  \catcode`\<=12
+  \catcode`\.=12
+  \catcode`\,=12
+  \catcode`\;=12
+  \catcode`\!=12
+  \catcode`\~=13
+
+  \gdef\DeclareUnicodeCharacter#1#2{%
+    \countUTFz = "#1\relax
+    %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}%
+    \begingroup
+      \parseXMLCharref
+      \def\UTFviiiTwoOctets##1##2{%
+        \csname u8:##1\string ##2\endcsname}%
+      \def\UTFviiiThreeOctets##1##2##3{%
+        \csname u8:##1\string ##2\string ##3\endcsname}%
+      \def\UTFviiiFourOctets##1##2##3##4{%
+        \csname u8:##1\string ##2\string ##3\string ##4\endcsname}%
+      \expandafter\expandafter\expandafter\expandafter
+       \expandafter\expandafter\expandafter
+       \gdef\UTFviiiTmp{#2}%
+    \endgroup}
+
+  \gdef\parseXMLCharref{%
+    \ifnum\countUTFz < "A0\relax
+      \errhelp = \EMsimple
+      \errmessage{Cannot define Unicode char value < 00A0}%
+    \else\ifnum\countUTFz < "800\relax
+      \parseUTFviiiA,%
+      \parseUTFviiiB C\UTFviiiTwoOctets.,%
+    \else\ifnum\countUTFz < "10000\relax
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiB E\UTFviiiThreeOctets.{,;}%
+    \else
+      \parseUTFviiiA;%
+      \parseUTFviiiA,%
+      \parseUTFviiiA!%
+      \parseUTFviiiB F\UTFviiiFourOctets.{!,;}%
+    \fi\fi\fi
+  }
+
+  \gdef\parseUTFviiiA#1{%
+    \countUTFx = \countUTFz
+    \divide\countUTFz by 64
+    \countUTFy = \countUTFz
+    \multiply\countUTFz by 64
+    \advance\countUTFx by -\countUTFz
+    \advance\countUTFx by 128
+    \uccode `#1\countUTFx
+    \countUTFz = \countUTFy}
+
+  \gdef\parseUTFviiiB#1#2#3#4{%
+    \advance\countUTFz by "#10\relax
+    \uccode `#3\countUTFz
+    \uppercase{\gdef\UTFviiiTmp{#2#3#4}}}
+\endgroup
+
+\def\utfeightchardefs{%
+  \DeclareUnicodeCharacter{00A0}{\tie}
+  \DeclareUnicodeCharacter{00A1}{\exclamdown}
+  \DeclareUnicodeCharacter{00A3}{\pounds}
+  \DeclareUnicodeCharacter{00A8}{\"{ }}
+  \DeclareUnicodeCharacter{00A9}{\copyright}
+  \DeclareUnicodeCharacter{00AA}{\ordf}
+  \DeclareUnicodeCharacter{00AB}{\guillemetleft}
+  \DeclareUnicodeCharacter{00AD}{\-}
+  \DeclareUnicodeCharacter{00AE}{\registeredsymbol}
+  \DeclareUnicodeCharacter{00AF}{\={ }}
+
+  \DeclareUnicodeCharacter{00B0}{\ringaccent{ }}
+  \DeclareUnicodeCharacter{00B4}{\'{ }}
+  \DeclareUnicodeCharacter{00B8}{\cedilla{ }}
+  \DeclareUnicodeCharacter{00BA}{\ordm}
+  \DeclareUnicodeCharacter{00BB}{\guillemetright}
+  \DeclareUnicodeCharacter{00BF}{\questiondown}
+
+  \DeclareUnicodeCharacter{00C0}{\`A}
+  \DeclareUnicodeCharacter{00C1}{\'A}
+  \DeclareUnicodeCharacter{00C2}{\^A}
+  \DeclareUnicodeCharacter{00C3}{\~A}
+  \DeclareUnicodeCharacter{00C4}{\"A}
+  \DeclareUnicodeCharacter{00C5}{\AA}
+  \DeclareUnicodeCharacter{00C6}{\AE}
+  \DeclareUnicodeCharacter{00C7}{\cedilla{C}}
+  \DeclareUnicodeCharacter{00C8}{\`E}
+  \DeclareUnicodeCharacter{00C9}{\'E}
+  \DeclareUnicodeCharacter{00CA}{\^E}
+  \DeclareUnicodeCharacter{00CB}{\"E}
+  \DeclareUnicodeCharacter{00CC}{\`I}
+  \DeclareUnicodeCharacter{00CD}{\'I}
+  \DeclareUnicodeCharacter{00CE}{\^I}
+  \DeclareUnicodeCharacter{00CF}{\"I}
+
+  \DeclareUnicodeCharacter{00D0}{\DH}
+  \DeclareUnicodeCharacter{00D1}{\~N}
+  \DeclareUnicodeCharacter{00D2}{\`O}
+  \DeclareUnicodeCharacter{00D3}{\'O}
+  \DeclareUnicodeCharacter{00D4}{\^O}
+  \DeclareUnicodeCharacter{00D5}{\~O}
+  \DeclareUnicodeCharacter{00D6}{\"O}
+  \DeclareUnicodeCharacter{00D8}{\O}
+  \DeclareUnicodeCharacter{00D9}{\`U}
+  \DeclareUnicodeCharacter{00DA}{\'U}
+  \DeclareUnicodeCharacter{00DB}{\^U}
+  \DeclareUnicodeCharacter{00DC}{\"U}
+  \DeclareUnicodeCharacter{00DD}{\'Y}
+  \DeclareUnicodeCharacter{00DE}{\TH}
+  \DeclareUnicodeCharacter{00DF}{\ss}
+
+  \DeclareUnicodeCharacter{00E0}{\`a}
+  \DeclareUnicodeCharacter{00E1}{\'a}
+  \DeclareUnicodeCharacter{00E2}{\^a}
+  \DeclareUnicodeCharacter{00E3}{\~a}
+  \DeclareUnicodeCharacter{00E4}{\"a}
+  \DeclareUnicodeCharacter{00E5}{\aa}
+  \DeclareUnicodeCharacter{00E6}{\ae}
+  \DeclareUnicodeCharacter{00E7}{\cedilla{c}}
+  \DeclareUnicodeCharacter{00E8}{\`e}
+  \DeclareUnicodeCharacter{00E9}{\'e}
+  \DeclareUnicodeCharacter{00EA}{\^e}
+  \DeclareUnicodeCharacter{00EB}{\"e}
+  \DeclareUnicodeCharacter{00EC}{\`{\dotless{i}}}
+  \DeclareUnicodeCharacter{00ED}{\'{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}}
+  \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{00F0}{\dh}
+  \DeclareUnicodeCharacter{00F1}{\~n}
+  \DeclareUnicodeCharacter{00F2}{\`o}
+  \DeclareUnicodeCharacter{00F3}{\'o}
+  \DeclareUnicodeCharacter{00F4}{\^o}
+  \DeclareUnicodeCharacter{00F5}{\~o}
+  \DeclareUnicodeCharacter{00F6}{\"o}
+  \DeclareUnicodeCharacter{00F8}{\o}
+  \DeclareUnicodeCharacter{00F9}{\`u}
+  \DeclareUnicodeCharacter{00FA}{\'u}
+  \DeclareUnicodeCharacter{00FB}{\^u}
+  \DeclareUnicodeCharacter{00FC}{\"u}
+  \DeclareUnicodeCharacter{00FD}{\'y}
+  \DeclareUnicodeCharacter{00FE}{\th}
+  \DeclareUnicodeCharacter{00FF}{\"y}
+
+  \DeclareUnicodeCharacter{0100}{\=A}
+  \DeclareUnicodeCharacter{0101}{\=a}
+  \DeclareUnicodeCharacter{0102}{\u{A}}
+  \DeclareUnicodeCharacter{0103}{\u{a}}
+  \DeclareUnicodeCharacter{0104}{\ogonek{A}}
+  \DeclareUnicodeCharacter{0105}{\ogonek{a}}
+  \DeclareUnicodeCharacter{0106}{\'C}
+  \DeclareUnicodeCharacter{0107}{\'c}
+  \DeclareUnicodeCharacter{0108}{\^C}
+  \DeclareUnicodeCharacter{0109}{\^c}
+  \DeclareUnicodeCharacter{0118}{\ogonek{E}}
+  \DeclareUnicodeCharacter{0119}{\ogonek{e}}
+  \DeclareUnicodeCharacter{010A}{\dotaccent{C}}
+  \DeclareUnicodeCharacter{010B}{\dotaccent{c}}
+  \DeclareUnicodeCharacter{010C}{\v{C}}
+  \DeclareUnicodeCharacter{010D}{\v{c}}
+  \DeclareUnicodeCharacter{010E}{\v{D}}
+
+  \DeclareUnicodeCharacter{0112}{\=E}
+  \DeclareUnicodeCharacter{0113}{\=e}
+  \DeclareUnicodeCharacter{0114}{\u{E}}
+  \DeclareUnicodeCharacter{0115}{\u{e}}
+  \DeclareUnicodeCharacter{0116}{\dotaccent{E}}
+  \DeclareUnicodeCharacter{0117}{\dotaccent{e}}
+  \DeclareUnicodeCharacter{011A}{\v{E}}
+  \DeclareUnicodeCharacter{011B}{\v{e}}
+  \DeclareUnicodeCharacter{011C}{\^G}
+  \DeclareUnicodeCharacter{011D}{\^g}
+  \DeclareUnicodeCharacter{011E}{\u{G}}
+  \DeclareUnicodeCharacter{011F}{\u{g}}
+
+  \DeclareUnicodeCharacter{0120}{\dotaccent{G}}
+  \DeclareUnicodeCharacter{0121}{\dotaccent{g}}
+  \DeclareUnicodeCharacter{0124}{\^H}
+  \DeclareUnicodeCharacter{0125}{\^h}
+  \DeclareUnicodeCharacter{0128}{\~I}
+  \DeclareUnicodeCharacter{0129}{\~{\dotless{i}}}
+  \DeclareUnicodeCharacter{012A}{\=I}
+  \DeclareUnicodeCharacter{012B}{\={\dotless{i}}}
+  \DeclareUnicodeCharacter{012C}{\u{I}}
+  \DeclareUnicodeCharacter{012D}{\u{\dotless{i}}}
+
+  \DeclareUnicodeCharacter{0130}{\dotaccent{I}}
+  \DeclareUnicodeCharacter{0131}{\dotless{i}}
+  \DeclareUnicodeCharacter{0132}{IJ}
+  \DeclareUnicodeCharacter{0133}{ij}
+  \DeclareUnicodeCharacter{0134}{\^J}
+  \DeclareUnicodeCharacter{0135}{\^{\dotless{j}}}
+  \DeclareUnicodeCharacter{0139}{\'L}
+  \DeclareUnicodeCharacter{013A}{\'l}
+
+  \DeclareUnicodeCharacter{0141}{\L}
+  \DeclareUnicodeCharacter{0142}{\l}
+  \DeclareUnicodeCharacter{0143}{\'N}
+  \DeclareUnicodeCharacter{0144}{\'n}
+  \DeclareUnicodeCharacter{0147}{\v{N}}
+  \DeclareUnicodeCharacter{0148}{\v{n}}
+  \DeclareUnicodeCharacter{014C}{\=O}
+  \DeclareUnicodeCharacter{014D}{\=o}
+  \DeclareUnicodeCharacter{014E}{\u{O}}
+  \DeclareUnicodeCharacter{014F}{\u{o}}
+
+  \DeclareUnicodeCharacter{0150}{\H{O}}
+  \DeclareUnicodeCharacter{0151}{\H{o}}
+  \DeclareUnicodeCharacter{0152}{\OE}
+  \DeclareUnicodeCharacter{0153}{\oe}
+  \DeclareUnicodeCharacter{0154}{\'R}
+  \DeclareUnicodeCharacter{0155}{\'r}
+  \DeclareUnicodeCharacter{0158}{\v{R}}
+  \DeclareUnicodeCharacter{0159}{\v{r}}
+  \DeclareUnicodeCharacter{015A}{\'S}
+  \DeclareUnicodeCharacter{015B}{\'s}
+  \DeclareUnicodeCharacter{015C}{\^S}
+  \DeclareUnicodeCharacter{015D}{\^s}
+  \DeclareUnicodeCharacter{015E}{\cedilla{S}}
+  \DeclareUnicodeCharacter{015F}{\cedilla{s}}
+
+  \DeclareUnicodeCharacter{0160}{\v{S}}
+  \DeclareUnicodeCharacter{0161}{\v{s}}
+  \DeclareUnicodeCharacter{0162}{\cedilla{t}}
+  \DeclareUnicodeCharacter{0163}{\cedilla{T}}
+  \DeclareUnicodeCharacter{0164}{\v{T}}
+
+  \DeclareUnicodeCharacter{0168}{\~U}
+  \DeclareUnicodeCharacter{0169}{\~u}
+  \DeclareUnicodeCharacter{016A}{\=U}
+  \DeclareUnicodeCharacter{016B}{\=u}
+  \DeclareUnicodeCharacter{016C}{\u{U}}
+  \DeclareUnicodeCharacter{016D}{\u{u}}
+  \DeclareUnicodeCharacter{016E}{\ringaccent{U}}
+  \DeclareUnicodeCharacter{016F}{\ringaccent{u}}
+
+  \DeclareUnicodeCharacter{0170}{\H{U}}
+  \DeclareUnicodeCharacter{0171}{\H{u}}
+  \DeclareUnicodeCharacter{0174}{\^W}
+  \DeclareUnicodeCharacter{0175}{\^w}
+  \DeclareUnicodeCharacter{0176}{\^Y}
+  \DeclareUnicodeCharacter{0177}{\^y}
+  \DeclareUnicodeCharacter{0178}{\"Y}
+  \DeclareUnicodeCharacter{0179}{\'Z}
+  \DeclareUnicodeCharacter{017A}{\'z}
+  \DeclareUnicodeCharacter{017B}{\dotaccent{Z}}
+  \DeclareUnicodeCharacter{017C}{\dotaccent{z}}
+  \DeclareUnicodeCharacter{017D}{\v{Z}}
+  \DeclareUnicodeCharacter{017E}{\v{z}}
+
+  \DeclareUnicodeCharacter{01C4}{D\v{Z}}
+  \DeclareUnicodeCharacter{01C5}{D\v{z}}
+  \DeclareUnicodeCharacter{01C6}{d\v{z}}
+  \DeclareUnicodeCharacter{01C7}{LJ}
+  \DeclareUnicodeCharacter{01C8}{Lj}
+  \DeclareUnicodeCharacter{01C9}{lj}
+  \DeclareUnicodeCharacter{01CA}{NJ}
+  \DeclareUnicodeCharacter{01CB}{Nj}
+  \DeclareUnicodeCharacter{01CC}{nj}
+  \DeclareUnicodeCharacter{01CD}{\v{A}}
+  \DeclareUnicodeCharacter{01CE}{\v{a}}
+  \DeclareUnicodeCharacter{01CF}{\v{I}}
+
+  \DeclareUnicodeCharacter{01D0}{\v{\dotless{i}}}
+  \DeclareUnicodeCharacter{01D1}{\v{O}}
+  \DeclareUnicodeCharacter{01D2}{\v{o}}
+  \DeclareUnicodeCharacter{01D3}{\v{U}}
+  \DeclareUnicodeCharacter{01D4}{\v{u}}
+
+  \DeclareUnicodeCharacter{01E2}{\={\AE}}
+  \DeclareUnicodeCharacter{01E3}{\={\ae}}
+  \DeclareUnicodeCharacter{01E6}{\v{G}}
+  \DeclareUnicodeCharacter{01E7}{\v{g}}
+  \DeclareUnicodeCharacter{01E8}{\v{K}}
+  \DeclareUnicodeCharacter{01E9}{\v{k}}
+
+  \DeclareUnicodeCharacter{01F0}{\v{\dotless{j}}}
+  \DeclareUnicodeCharacter{01F1}{DZ}
+  \DeclareUnicodeCharacter{01F2}{Dz}
+  \DeclareUnicodeCharacter{01F3}{dz}
+  \DeclareUnicodeCharacter{01F4}{\'G}
+  \DeclareUnicodeCharacter{01F5}{\'g}
+  \DeclareUnicodeCharacter{01F8}{\`N}
+  \DeclareUnicodeCharacter{01F9}{\`n}
+  \DeclareUnicodeCharacter{01FC}{\'{\AE}}
+  \DeclareUnicodeCharacter{01FD}{\'{\ae}}
+  \DeclareUnicodeCharacter{01FE}{\'{\O}}
+  \DeclareUnicodeCharacter{01FF}{\'{\o}}
+
+  \DeclareUnicodeCharacter{021E}{\v{H}}
+  \DeclareUnicodeCharacter{021F}{\v{h}}
+
+  \DeclareUnicodeCharacter{0226}{\dotaccent{A}}
+  \DeclareUnicodeCharacter{0227}{\dotaccent{a}}
+  \DeclareUnicodeCharacter{0228}{\cedilla{E}}
+  \DeclareUnicodeCharacter{0229}{\cedilla{e}}
+  \DeclareUnicodeCharacter{022E}{\dotaccent{O}}
+  \DeclareUnicodeCharacter{022F}{\dotaccent{o}}
+
+  \DeclareUnicodeCharacter{0232}{\=Y}
+  \DeclareUnicodeCharacter{0233}{\=y}
+  \DeclareUnicodeCharacter{0237}{\dotless{j}}
+
+  \DeclareUnicodeCharacter{02DB}{\ogonek{ }}
+
+  \DeclareUnicodeCharacter{1E02}{\dotaccent{B}}
+  \DeclareUnicodeCharacter{1E03}{\dotaccent{b}}
+  \DeclareUnicodeCharacter{1E04}{\udotaccent{B}}
+  \DeclareUnicodeCharacter{1E05}{\udotaccent{b}}
+  \DeclareUnicodeCharacter{1E06}{\ubaraccent{B}}
+  \DeclareUnicodeCharacter{1E07}{\ubaraccent{b}}
+  \DeclareUnicodeCharacter{1E0A}{\dotaccent{D}}
+  \DeclareUnicodeCharacter{1E0B}{\dotaccent{d}}
+  \DeclareUnicodeCharacter{1E0C}{\udotaccent{D}}
+  \DeclareUnicodeCharacter{1E0D}{\udotaccent{d}}
+  \DeclareUnicodeCharacter{1E0E}{\ubaraccent{D}}
+  \DeclareUnicodeCharacter{1E0F}{\ubaraccent{d}}
+
+  \DeclareUnicodeCharacter{1E1E}{\dotaccent{F}}
+  \DeclareUnicodeCharacter{1E1F}{\dotaccent{f}}
+
+  \DeclareUnicodeCharacter{1E20}{\=G}
+  \DeclareUnicodeCharacter{1E21}{\=g}
+  \DeclareUnicodeCharacter{1E22}{\dotaccent{H}}
+  \DeclareUnicodeCharacter{1E23}{\dotaccent{h}}
+  \DeclareUnicodeCharacter{1E24}{\udotaccent{H}}
+  \DeclareUnicodeCharacter{1E25}{\udotaccent{h}}
+  \DeclareUnicodeCharacter{1E26}{\"H}
+  \DeclareUnicodeCharacter{1E27}{\"h}
+
+  \DeclareUnicodeCharacter{1E30}{\'K}
+  \DeclareUnicodeCharacter{1E31}{\'k}
+  \DeclareUnicodeCharacter{1E32}{\udotaccent{K}}
+  \DeclareUnicodeCharacter{1E33}{\udotaccent{k}}
+  \DeclareUnicodeCharacter{1E34}{\ubaraccent{K}}
+  \DeclareUnicodeCharacter{1E35}{\ubaraccent{k}}
+  \DeclareUnicodeCharacter{1E36}{\udotaccent{L}}
+  \DeclareUnicodeCharacter{1E37}{\udotaccent{l}}
+  \DeclareUnicodeCharacter{1E3A}{\ubaraccent{L}}
+  \DeclareUnicodeCharacter{1E3B}{\ubaraccent{l}}
+  \DeclareUnicodeCharacter{1E3E}{\'M}
+  \DeclareUnicodeCharacter{1E3F}{\'m}
+
+  \DeclareUnicodeCharacter{1E40}{\dotaccent{M}}
+  \DeclareUnicodeCharacter{1E41}{\dotaccent{m}}
+  \DeclareUnicodeCharacter{1E42}{\udotaccent{M}}
+  \DeclareUnicodeCharacter{1E43}{\udotaccent{m}}
+  \DeclareUnicodeCharacter{1E44}{\dotaccent{N}}
+  \DeclareUnicodeCharacter{1E45}{\dotaccent{n}}
+  \DeclareUnicodeCharacter{1E46}{\udotaccent{N}}
+  \DeclareUnicodeCharacter{1E47}{\udotaccent{n}}
+  \DeclareUnicodeCharacter{1E48}{\ubaraccent{N}}
+  \DeclareUnicodeCharacter{1E49}{\ubaraccent{n}}
+
+  \DeclareUnicodeCharacter{1E54}{\'P}
+  \DeclareUnicodeCharacter{1E55}{\'p}
+  \DeclareUnicodeCharacter{1E56}{\dotaccent{P}}
+  \DeclareUnicodeCharacter{1E57}{\dotaccent{p}}
+  \DeclareUnicodeCharacter{1E58}{\dotaccent{R}}
+  \DeclareUnicodeCharacter{1E59}{\dotaccent{r}}
+  \DeclareUnicodeCharacter{1E5A}{\udotaccent{R}}
+  \DeclareUnicodeCharacter{1E5B}{\udotaccent{r}}
+  \DeclareUnicodeCharacter{1E5E}{\ubaraccent{R}}
+  \DeclareUnicodeCharacter{1E5F}{\ubaraccent{r}}
+
+  \DeclareUnicodeCharacter{1E60}{\dotaccent{S}}
+  \DeclareUnicodeCharacter{1E61}{\dotaccent{s}}
+  \DeclareUnicodeCharacter{1E62}{\udotaccent{S}}
+  \DeclareUnicodeCharacter{1E63}{\udotaccent{s}}
+  \DeclareUnicodeCharacter{1E6A}{\dotaccent{T}}
+  \DeclareUnicodeCharacter{1E6B}{\dotaccent{t}}
+  \DeclareUnicodeCharacter{1E6C}{\udotaccent{T}}
+  \DeclareUnicodeCharacter{1E6D}{\udotaccent{t}}
+  \DeclareUnicodeCharacter{1E6E}{\ubaraccent{T}}
+  \DeclareUnicodeCharacter{1E6F}{\ubaraccent{t}}
+
+  \DeclareUnicodeCharacter{1E7C}{\~V}
+  \DeclareUnicodeCharacter{1E7D}{\~v}
+  \DeclareUnicodeCharacter{1E7E}{\udotaccent{V}}
+  \DeclareUnicodeCharacter{1E7F}{\udotaccent{v}}
+
+  \DeclareUnicodeCharacter{1E80}{\`W}
+  \DeclareUnicodeCharacter{1E81}{\`w}
+  \DeclareUnicodeCharacter{1E82}{\'W}
+  \DeclareUnicodeCharacter{1E83}{\'w}
+  \DeclareUnicodeCharacter{1E84}{\"W}
+  \DeclareUnicodeCharacter{1E85}{\"w}
+  \DeclareUnicodeCharacter{1E86}{\dotaccent{W}}
+  \DeclareUnicodeCharacter{1E87}{\dotaccent{w}}
+  \DeclareUnicodeCharacter{1E88}{\udotaccent{W}}
+  \DeclareUnicodeCharacter{1E89}{\udotaccent{w}}
+  \DeclareUnicodeCharacter{1E8A}{\dotaccent{X}}
+  \DeclareUnicodeCharacter{1E8B}{\dotaccent{x}}
+  \DeclareUnicodeCharacter{1E8C}{\"X}
+  \DeclareUnicodeCharacter{1E8D}{\"x}
+  \DeclareUnicodeCharacter{1E8E}{\dotaccent{Y}}
+  \DeclareUnicodeCharacter{1E8F}{\dotaccent{y}}
+
+  \DeclareUnicodeCharacter{1E90}{\^Z}
+  \DeclareUnicodeCharacter{1E91}{\^z}
+  \DeclareUnicodeCharacter{1E92}{\udotaccent{Z}}
+  \DeclareUnicodeCharacter{1E93}{\udotaccent{z}}
+  \DeclareUnicodeCharacter{1E94}{\ubaraccent{Z}}
+  \DeclareUnicodeCharacter{1E95}{\ubaraccent{z}}
+  \DeclareUnicodeCharacter{1E96}{\ubaraccent{h}}
+  \DeclareUnicodeCharacter{1E97}{\"t}
+  \DeclareUnicodeCharacter{1E98}{\ringaccent{w}}
+  \DeclareUnicodeCharacter{1E99}{\ringaccent{y}}
+
+  \DeclareUnicodeCharacter{1EA0}{\udotaccent{A}}
+  \DeclareUnicodeCharacter{1EA1}{\udotaccent{a}}
+
+  \DeclareUnicodeCharacter{1EB8}{\udotaccent{E}}
+  \DeclareUnicodeCharacter{1EB9}{\udotaccent{e}}
+  \DeclareUnicodeCharacter{1EBC}{\~E}
+  \DeclareUnicodeCharacter{1EBD}{\~e}
+
+  \DeclareUnicodeCharacter{1ECA}{\udotaccent{I}}
+  \DeclareUnicodeCharacter{1ECB}{\udotaccent{i}}
+  \DeclareUnicodeCharacter{1ECC}{\udotaccent{O}}
+  \DeclareUnicodeCharacter{1ECD}{\udotaccent{o}}
+
+  \DeclareUnicodeCharacter{1EE4}{\udotaccent{U}}
+  \DeclareUnicodeCharacter{1EE5}{\udotaccent{u}}
+
+  \DeclareUnicodeCharacter{1EF2}{\`Y}
+  \DeclareUnicodeCharacter{1EF3}{\`y}
+  \DeclareUnicodeCharacter{1EF4}{\udotaccent{Y}}
+
+  \DeclareUnicodeCharacter{1EF8}{\~Y}
+  \DeclareUnicodeCharacter{1EF9}{\~y}
+
+  \DeclareUnicodeCharacter{2013}{--}
+  \DeclareUnicodeCharacter{2014}{---}
+  \DeclareUnicodeCharacter{2018}{\quoteleft}
+  \DeclareUnicodeCharacter{2019}{\quoteright}
+  \DeclareUnicodeCharacter{201A}{\quotesinglbase}
+  \DeclareUnicodeCharacter{201C}{\quotedblleft}
+  \DeclareUnicodeCharacter{201D}{\quotedblright}
+  \DeclareUnicodeCharacter{201E}{\quotedblbase}
+  \DeclareUnicodeCharacter{2022}{\bullet}
+  \DeclareUnicodeCharacter{2026}{\dots}
+  \DeclareUnicodeCharacter{2039}{\guilsinglleft}
+  \DeclareUnicodeCharacter{203A}{\guilsinglright}
+  \DeclareUnicodeCharacter{20AC}{\euro}
+
+  \DeclareUnicodeCharacter{2192}{\expansion}
+  \DeclareUnicodeCharacter{21D2}{\result}
+
+  \DeclareUnicodeCharacter{2212}{\minus}
+  \DeclareUnicodeCharacter{2217}{\point}
+  \DeclareUnicodeCharacter{2261}{\equiv}
+}% end of \utfeightchardefs
+
+
+% US-ASCII character definitions.
+\def\asciichardefs{% nothing need be done
+   \relax
+}
+
+% Make non-ASCII characters printable again for compatibility with
+% existing Texinfo documents that may use them, even without declaring a
+% document encoding.
+%
+\setnonasciicharscatcode \other
+
+
+\message{formatting,}
+
+\newdimen\defaultparindent \defaultparindent = 15pt
+
+\chapheadingskip = 15pt plus 4pt minus 2pt
+\secheadingskip = 12pt plus 3pt minus 2pt
+\subsecheadingskip = 9pt plus 2pt minus 2pt
+
+% Prevent underfull vbox error messages.
+\vbadness = 10000
+
+% Don't be very finicky about underfull hboxes, either.
+\hbadness = 6666
+
+% Following George Bush, get rid of widows and orphans.
+\widowpenalty=10000
+\clubpenalty=10000
+
+% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
+% using an old version of TeX, don't do anything.  We want the amount of
+% stretch added to depend on the line length, hence the dependence on
+% \hsize.  We call this whenever the paper size is set.
+%
+\def\setemergencystretch{%
+  \ifx\emergencystretch\thisisundefined
+    % Allow us to assign to \emergencystretch anyway.
+    \def\emergencystretch{\dimen0}%
+  \else
+    \emergencystretch = .15\hsize
+  \fi
+}
+
+% Parameters in order: 1) textheight; 2) textwidth;
+% 3) voffset; 4) hoffset; 5) binding offset; 6) topskip;
+% 7) physical page height; 8) physical page width.
+%
+% We also call \setleading{\textleading}, so the caller should define
+% \textleading.  The caller should also set \parskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6#7#8{%
+  \voffset = #3\relax
+  \topskip = #6\relax
+  \splittopskip = \topskip
+  %
+  \vsize = #1\relax
+  \advance\vsize by \topskip
+  \outervsize = \vsize
+  \advance\outervsize by 2\topandbottommargin
+  \pageheight = \vsize
+  %
+  \hsize = #2\relax
+  \outerhsize = \hsize
+  \advance\outerhsize by 0.5in
+  \pagewidth = \hsize
+  %
+  \normaloffset = #4\relax
+  \bindingoffset = #5\relax
+  %
+  \ifpdf
+    \pdfpageheight #7\relax
+    \pdfpagewidth #8\relax
+    % if we don't reset these, they will remain at "1 true in" of
+    % whatever layout pdftex was dumped with.
+    \pdfhorigin = 1 true in
+    \pdfvorigin = 1 true in
+  \fi
+  %
+  \setleading{\textleading}
+  %
+  \parindent = \defaultparindent
+  \setemergencystretch
+}
+
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % If page is nothing but text, make it come out even.
+  \internalpagesizes{607.2pt}{6in}% that's 46 lines
+                    {\voffset}{.25in}%
+                    {\bindingoffset}{36pt}%
+                    {11in}{8.5in}%
+}}
+
+% Use @smallbook to reset parameters for 7x9.25 trim size.
+\def\smallbook{{\globaldefs = 1
+  \parskip = 2pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.5in}{5in}%
+                    {-.2in}{0in}%
+                    {\bindingoffset}{16pt}%
+                    {9.25in}{7in}%
+  %
+  \lispnarrowing = 0.3in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .5cm
+}}
+
+% Use @smallerbook to reset parameters for 6x9 trim size.
+% (Just testing, parameters still in flux.)
+\def\smallerbook{{\globaldefs = 1
+  \parskip = 1.5pt plus 1pt
+  \textleading = 12pt
+  %
+  \internalpagesizes{7.4in}{4.8in}%
+                    {-.2in}{-.4in}%
+                    {0pt}{14pt}%
+                    {9in}{6in}%
+  %
+  \lispnarrowing = 0.25in
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = .4cm
+}}
+
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+  \parskip = 3pt plus 2pt minus 1pt
+  \textleading = 13.2pt
+  %
+  % Double-side printing via postscript on Laserjet 4050
+  % prints double-sided nicely when \bindingoffset=10mm and \hoffset=-6mm.
+  % To change the settings for a different printer or situation, adjust
+  % \normaloffset until the front-side and back-side texts align.  Then
+  % do the same for \bindingoffset.  You can set these for testing in
+  % your texinfo source file like this:
+  % @tex
+  % \global\normaloffset = -6mm
+  % \global\bindingoffset = 10mm
+  % @end tex
+  \internalpagesizes{673.2pt}{160mm}% that's 51 lines
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{44pt}%
+                    {297mm}{210mm}%
+  %
+  \tolerance = 700
+  \hfuzz = 1pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 5mm
+}}
+
+% Use @afivepaper to print on European A5 paper.
+% From romildo@urano.iceb.ufop.br, 2 July 2000.
+% He also recommends making @example and @lisp be small.
+\def\afivepaper{{\globaldefs = 1
+  \parskip = 2pt plus 1pt minus 0.1pt
+  \textleading = 12.5pt
+  %
+  \internalpagesizes{160mm}{120mm}%
+                    {\voffset}{\hoffset}%
+                    {\bindingoffset}{8pt}%
+                    {210mm}{148mm}%
+  %
+  \lispnarrowing = 0.2in
+  \tolerance = 800
+  \hfuzz = 1.2pt
+  \contentsrightmargin = 0pt
+  \defbodyindent = 2mm
+  \tableindent = 12mm
+}}
+
+% A specific text layout, 24x15cm overall, intended for A4 paper.
+\def\afourlatex{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{237mm}{150mm}%
+                    {\voffset}{4.6mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  %
+  % Must explicitly reset to 0 because we call \afourpaper.
+  \globaldefs = 0
+}}
+
+% Use @afourwide to print on A4 paper in landscape format.
+\def\afourwide{{\globaldefs = 1
+  \afourpaper
+  \internalpagesizes{241mm}{165mm}%
+                    {\voffset}{-2.95mm}%
+                    {\bindingoffset}{7mm}%
+                    {297mm}{210mm}%
+  \globaldefs = 0
+}}
+
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\parseargdef\pagesizes{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+  \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+  \globaldefs = 1
+  %
+  \parskip = 3pt plus 2pt minus 1pt
+  \setleading{\textleading}%
+  %
+  \dimen0 = #1\relax
+  \advance\dimen0 by \voffset
+  %
+  \dimen2 = \hsize
+  \advance\dimen2 by \normaloffset
+  %
+  \internalpagesizes{#1}{\hsize}%
+                    {\voffset}{\normaloffset}%
+                    {\bindingoffset}{44pt}%
+                    {\dimen0}{\dimen2}%
+}}
+
+% Set default to letter.
+%
+\letterpaper
+
+
+\message{and turning on texinfo input format.}
+
+\def^^L{\par} % remove \outer, so ^L can appear in an @comment
+
+% DEL is a comment character, in case @c does not suffice.
+\catcode`\^^? = 14
+
+% Define macros to output various characters with catcode for normal text.
+\catcode`\"=\other \def\normaldoublequote{"}
+\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix
+\catcode`\+=\other \def\normalplus{+}
+\catcode`\<=\other \def\normalless{<}
+\catcode`\>=\other \def\normalgreater{>}
+\catcode`\^=\other \def\normalcaret{^}
+\catcode`\_=\other \def\normalunderscore{_}
+\catcode`\|=\other \def\normalverticalbar{|}
+\catcode`\~=\other \def\normaltilde{~}
+
+% This macro is used to make a character print one way in \tt
+% (where it can probably be output as-is), and another way in other fonts,
+% where something hairier probably needs to be done.
+%
+% #1 is what to print if we are indeed using \tt; #2 is what to print
+% otherwise.  Since all the Computer Modern typewriter fonts have zero
+% interword stretch (and shrink), and it is reasonable to expect all
+% typewriter fonts to have this, we can check that font parameter.
+%
+\def\ifusingtt#1#2{\ifdim \fontdimen3\font=0pt #1\else #2\fi}
+
+% Same as above, but check for italic font.  Actually this also catches
+% non-italic slanted fonts since it is impossible to distinguish them from
+% italic fonts.  But since this is only used by $ and it uses \sl anyway
+% this is not a problem.
+\def\ifusingit#1#2{\ifdim \fontdimen1\font>0pt #1\else #2\fi}
+
+% Turn off all special characters except @
+% (and those which the user can use as if they were ordinary).
+% Most of these we simply print from the \tt font, but for some, we can
+% use math or other variants that look better in normal text.
+
+\catcode`\"=\active
+\def\activedoublequote{{\tt\char34}}
+\let"=\activedoublequote
+\catcode`\~=\active
+\def~{{\tt\char126}}
+\chardef\hat=`\^
+\catcode`\^=\active
+\def^{{\tt \hat}}
+
+\catcode`\_=\active
+\def_{\ifusingtt\normalunderscore\_}
+\let\realunder=_
+% Subroutine for the previous macro.
+\def\_{\leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }
+
+\catcode`\|=\active
+\def|{{\tt\char124}}
+\chardef \less=`\<
+\catcode`\<=\active
+\def<{{\tt \less}}
+\chardef \gtr=`\>
+\catcode`\>=\active
+\def>{{\tt \gtr}}
+\catcode`\+=\active
+\def+{{\tt \char 43}}
+\catcode`\$=\active
+\def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have \everyjob (or @setfilename) turn them on.
+% \otherifyactive is called near the end of this file.
+\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
+
+% Used sometimes to turn off (effectively) the active characters even after
+% parsing them.
+\def\turnoffactive{%
+  \normalturnoffactive
+  \otherbackslash
+}
+
+\catcode`\@=0
+
+% \backslashcurfont outputs one backslash character in current font,
+% as in \char`\\.
+\global\chardef\backslashcurfont=`\\
+\global\let\rawbackslashxx=\backslashcurfont  % let existing .??s files work
+
+% \realbackslash is an actual character `\' with catcode other, and
+% \doublebackslash is two of them (for the pdf outlines).
+{\catcode`\\=\other @gdef@realbackslash{\} @gdef@doublebackslash{\\}}
+
+% In texinfo, backslash is an active character; it prints the backslash
+% in fixed width font.
+\catcode`\\=\active
+@def@normalbackslash{{@tt@backslashcurfont}}
+% On startup, @fixbackslash assigns:
+%  @let \ = @normalbackslash
+
+% \rawbackslash defines an active \ to do \backslashcurfont.
+% \otherbackslash defines an active \ to be a literal `\' character with
+% catcode other.
+@gdef@rawbackslash{@let\=@backslashcurfont}
+@gdef@otherbackslash{@let\=@realbackslash}
+
+% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
+% the literal character `\'.
+%
+@def@normalturnoffactive{%
+  @let"=@normaldoublequote
+  @let$=@normaldollar %$ font-lock fix
+  @let+=@normalplus
+  @let<=@normalless
+  @let>=@normalgreater
+  @let\=@normalbackslash
+  @let^=@normalcaret
+  @let_=@normalunderscore
+  @let|=@normalverticalbar
+  @let~=@normaltilde
+  @markupsetuplqdefault
+  @markupsetuprqdefault
+  @unsepspaces
+}
+
+% Make _ and + \other characters, temporarily.
+% This is canceled by @fixbackslash.
+@otherifyactive
+
+% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
+% That is what \eatinput is for; after that, the `\' should revert to printing
+% a backslash.
+%
+@gdef@eatinput input texinfo{@fixbackslash}
+@global@let\ = @eatinput
+
+% On the other hand, perhaps the file did not have a `\input texinfo'. Then
+% the first `\' in the file would cause an error. This macro tries to fix
+% that, assuming it is called before the first `\' could plausibly occur.
+% Also turn back on active characters that might appear in the input
+% file name, in case not using a pre-dumped format.
+%
+@gdef@fixbackslash{%
+  @ifx\@eatinput @let\ = @normalbackslash @fi
+  @catcode`+=@active
+  @catcode`@_=@active
+}
+
+% Say @foo, not \foo, in error messages.
+@escapechar = `@@
+
+% These (along with & and #) are made active for url-breaking, so need
+% active definitions as the normal characters.
+@def@normaldot{.}
+@def@normalquest{?}
+@def@normalslash{/}
+
+% These look ok in all fonts, so just make them not special.
+@catcode`@& = @other @def@normalamp{&}
+@catcode`@# = @other @def@normalhash{#}
+@catcode`@% = @other @def@normalpercent{%}
+
+@c Finally, make ` and ' active, so that txicodequoteundirected and
+@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}.  If we
+@c don't make ` and ' active, @code will not get them as active chars.
+@c Do this last of all since we use ` in the previous @catcode assignments.
+@catcode`@'=@active
+@catcode`@`=@active
+@markupsetuplqdefault
+@markupsetuprqdefault
+
+@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
+@c page-delimiter: "^\\\\message"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d.%02H"
+@c time-stamp-end: "}"
+@c End:
+
+@c vim:sw=2:
+
+@ignore
+   arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
+@end ignore
diff --git a/libltdl/configure b/libltdl/configure
new file mode 100755
index 0000000..f18f272
--- /dev/null
+++ b/libltdl/configure
@@ -0,0 +1,14879 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for libltdl 2.4.2.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libltdl'
+PACKAGE_TARNAME='libltdl'
+PACKAGE_VERSION='2.4.2'
+PACKAGE_STRING='libltdl 2.4.2'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="ltdl.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LTDLOPEN
+LT_CONFIG_H
+CONVENIENCE_LTDL_FALSE
+CONVENIENCE_LTDL_TRUE
+INSTALL_LTDL_FALSE
+INSTALL_LTDL_TRUE
+ARGZ_H
+LIBOBJS
+sys_symbol_underscore
+LIBADD_DL
+LT_DLPREOPEN
+LIBADD_DLD_LINK
+LIBADD_SHL_LOAD
+LIBADD_DLOPEN
+LT_DLLOADERS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+enable_dependency_tracking
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+enable_ltdl_install
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures libltdl 2.4.2 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/libltdl]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of libltdl 2.4.2:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+  --enable-ltdl-install   install libltdl
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+libltdl configure 2.4.2
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  as_decl_name=`echo $2|sed 's/ *(.*//'`
+  as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+  (void) $as_decl_use;
+#else
+  (void) $as_decl_name;
+#endif
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_decl
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libltdl $as_me 2.4.2, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_config_headers="$ac_config_headers config.h:config-h.in"
+
+
+ac_aux_dir=
+for ac_dir in config "$srcdir"/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in config \"$srcdir\"/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+
+
+
+
+ # I am me!
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libltdl'
+ VERSION='2.4.2'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ------------------------------- ##
+## Libtool specific configuration. ##
+## ------------------------------- ##
+pkgdatadir='${datadir}'"/${PACKAGE}"
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+enable_dlopen=yes
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+  ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which extension is used for runtime loadable modules" >&5
+$as_echo_n "checking which extension is used for runtime loadable modules... " >&6; }
+if ${libltdl_cv_shlibext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+module=yes
+eval libltdl_cv_shlibext=$shrext_cmds
+module=no
+eval libltdl_cv_shrext=$shrext_cmds
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libltdl_cv_shlibext" >&5
+$as_echo "$libltdl_cv_shlibext" >&6; }
+if test -n "$libltdl_cv_shlibext"; then
+
+cat >>confdefs.h <<_ACEOF
+#define LT_MODULE_EXT "$libltdl_cv_shlibext"
+_ACEOF
+
+fi
+if test "$libltdl_cv_shrext" != "$libltdl_cv_shlibext"; then
+
+cat >>confdefs.h <<_ACEOF
+#define LT_SHARED_EXT "$libltdl_cv_shrext"
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which variable specifies run-time module search path" >&5
+$as_echo_n "checking which variable specifies run-time module search path... " >&6; }
+if ${lt_cv_module_path_var+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_module_path_var="$shlibpath_var"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_module_path_var" >&5
+$as_echo "$lt_cv_module_path_var" >&6; }
+if test -n "$lt_cv_module_path_var"; then
+
+cat >>confdefs.h <<_ACEOF
+#define LT_MODULE_PATH_VAR "$lt_cv_module_path_var"
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for the default library search path" >&5
+$as_echo_n "checking for the default library search path... " >&6; }
+if ${lt_cv_sys_dlsearch_path+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_dlsearch_path" >&5
+$as_echo "$lt_cv_sys_dlsearch_path" >&6; }
+if test -n "$lt_cv_sys_dlsearch_path"; then
+  sys_dlsearch_path=
+  for dir in $lt_cv_sys_dlsearch_path; do
+    if test -z "$sys_dlsearch_path"; then
+      sys_dlsearch_path="$dir"
+    else
+      sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir"
+    fi
+  done
+
+cat >>confdefs.h <<_ACEOF
+#define LT_DLSEARCH_PATH "$sys_dlsearch_path"
+_ACEOF
+
+fi
+
+
+LT_DLLOADERS=
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+LIBADD_DLOPEN=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
+$as_echo_n "checking for library containing dlopen... " >&6; }
+if ${ac_cv_search_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+for ac_lib in '' dl; do
+  if test -z "$ac_lib"; then
+    ac_res="none required"
+  else
+    ac_res=-l$ac_lib
+    LIBS="-l$ac_lib  $ac_func_search_save_LIBS"
+  fi
+  if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_search_dlopen=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext
+  if ${ac_cv_search_dlopen+:} false; then :
+  break
+fi
+done
+if ${ac_cv_search_dlopen+:} false; then :
+
+else
+  ac_cv_search_dlopen=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
+$as_echo "$ac_cv_search_dlopen" >&6; }
+ac_res=$ac_cv_search_dlopen
+if test "$ac_res" != no; then :
+  test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+
+$as_echo "#define HAVE_LIBDL 1" >>confdefs.h
+
+	if test "$ac_cv_search_dlopen" != "none required" ; then
+	  LIBADD_DLOPEN="-ldl"
+	fi
+	libltdl_cv_lib_dl_dlopen="yes"
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if HAVE_DLFCN_H
+#  include <dlfcn.h>
+#endif
+
+int
+main ()
+{
+dlopen(0, 0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+$as_echo "#define HAVE_LIBDL 1" >>confdefs.h
+
+	    libltdl_cv_func_dlopen="yes"
+	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+
+$as_echo "#define HAVE_LIBDL 1" >>confdefs.h
+
+	        LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes"
+		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"
+fi
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+
+if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes
+then
+  lt_save_LIBS="$LIBS"
+  LIBS="$LIBS $LIBADD_DLOPEN"
+  for ac_func in dlerror
+do :
+  ac_fn_c_check_func "$LINENO" "dlerror" "ac_cv_func_dlerror"
+if test "x$ac_cv_func_dlerror" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLERROR 1
+_ACEOF
+
+fi
+done
+
+  LIBS="$lt_save_LIBS"
+fi
+
+
+LIBADD_SHL_LOAD=
+ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+
+$as_echo "#define HAVE_SHL_LOAD 1" >>confdefs.h
+
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+
+$as_echo "#define HAVE_SHL_LOAD 1" >>confdefs.h
+
+	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"
+	    LIBADD_SHL_LOAD="-ldld"
+fi
+
+fi
+
+
+
+case $host_os in
+darwin[1567].*)
+# We only want this for pre-Mac OS X 10.4.
+  ac_fn_c_check_func "$LINENO" "_dyld_func_lookup" "ac_cv_func__dyld_func_lookup"
+if test "x$ac_cv_func__dyld_func_lookup" = xyes; then :
+
+$as_echo "#define HAVE_DYLD 1" >>confdefs.h
+
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"
+fi
+
+  ;;
+beos*)
+  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la"
+  ;;
+cygwin* | mingw* | os2* | pw32*)
+  ac_fn_c_check_decl "$LINENO" "cygwin_conv_path" "ac_cv_have_decl_cygwin_conv_path" "#include <sys/cygwin.h>
+"
+if test "x$ac_cv_have_decl_cygwin_conv_path" = xyes; then :
+  ac_have_decl=1
+else
+  ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_CYGWIN_CONV_PATH $ac_have_decl
+_ACEOF
+
+  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la"
+  ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+
+$as_echo "#define HAVE_DLD 1" >>confdefs.h
+
+		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"
+fi
+
+
+
+
+LT_DLPREOPEN=
+if test -n "$LT_DLLOADERS"
+then
+  for lt_loader in $LT_DLLOADERS; do
+    LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader "
+  done
+
+$as_echo "#define HAVE_LIBDLLOADER 1" >>confdefs.h
+
+fi
+
+
+LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD"
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for _ prefix in compiled symbols" >&5
+$as_echo_n "checking for _ prefix in compiled symbols... " >&6; }
+if ${lt_cv_sys_symbol_underscore+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sys_symbol_underscore=no
+  cat > conftest.$ac_ext <<_LT_EOF
+void nm_test_func(){}
+int main(){nm_test_func;return 0;}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    ac_nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$ac_nlist"; then
+      # See whether the symbols have a leading underscore.
+      if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
+        lt_cv_sys_symbol_underscore=yes
+      else
+        if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
+	  :
+        else
+	  echo "configure: cannot find nm_test_func in $ac_nlist" >&5
+        fi
+      fi
+    else
+      echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "configure: failed program was:" >&5
+    cat conftest.c >&5
+  fi
+  rm -rf conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_symbol_underscore" >&5
+$as_echo "$lt_cv_sys_symbol_underscore" >&6; }
+  sys_symbol_underscore=$lt_cv_sys_symbol_underscore
+
+
+if test x"$lt_cv_sys_symbol_underscore" = xyes; then
+  if test x"$libltdl_cv_func_dlopen" = xyes ||
+     test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we have to add an underscore for dlsym" >&5
+$as_echo_n "checking whether we have to add an underscore for dlsym... " >&6; }
+if ${libltdl_cv_need_uscore+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  libltdl_cv_need_uscore=unknown
+          save_LIBS="$LIBS"
+          LIBS="$LIBS $LIBADD_DLOPEN"
+	  if test "$cross_compiling" = yes; then :
+  libltdl_cv_need_uscore=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) libltdl_cv_need_uscore=no ;;
+      x$lt_dlneed_uscore) libltdl_cv_need_uscore=yes ;;
+      x$lt_dlunknown|x*)  ;;
+    esac
+  else :
+    # compilation failed
+
+  fi
+fi
+rm -fr conftest*
+
+	  LIBS="$save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libltdl_cv_need_uscore" >&5
+$as_echo "$libltdl_cv_need_uscore" >&6; }
+  fi
+fi
+
+if test x"$libltdl_cv_need_uscore" = xyes; then
+
+$as_echo "#define NEED_USCORE 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether deplibs are loaded by dlopen" >&5
+$as_echo_n "checking whether deplibs are loaded by dlopen... " >&6; }
+if ${lt_cv_sys_dlopen_deplibs+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # PORTME does your system automatically load deplibs for dlopen?
+  # or its logical equivalent (e.g. shl_load for HP-UX < 11)
+  # For now, we just catch OSes we know something about -- in the
+  # future, we'll try test this programmatically.
+  lt_cv_sys_dlopen_deplibs=unknown
+  case $host_os in
+  aix3*|aix4.1.*|aix4.2.*)
+    # Unknown whether this is true for these versions of AIX, but
+    # we want this `case' here to explicitly catch those versions.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  aix[4-9]*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  amigaos*)
+    case $host_cpu in
+    powerpc)
+      lt_cv_sys_dlopen_deplibs=no
+      ;;
+    esac
+    ;;
+  darwin*)
+    # Assuming the user has installed a libdl from somewhere, this is true
+    # If you are looking for one http://www.opendarwin.org/projects/dlcompat
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  freebsd* | dragonfly*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    # GNU and its variants, using gnu ld.so (Glibc)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  hpux10*|hpux11*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  interix*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  irix[12345]*|irix6.[01]*)
+    # Catch all versions of IRIX before 6.2, and indicate that we don't
+    # know how it worked for any of those versions.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  irix*)
+    # The case above catches anything before 6.2, and it's known that
+    # at 6.2 and later dlopen does load deplibs.
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  netbsd*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  openbsd*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  osf[1234]*)
+    # dlopen did load deplibs (at least at 4.x), but until the 5.x series,
+    # it did *not* use an RPATH in a shared library to find objects the
+    # library depends on, so we explicitly say `no'.
+    lt_cv_sys_dlopen_deplibs=no
+    ;;
+  osf5.0|osf5.0a|osf5.1)
+    # dlopen *does* load deplibs and with the right loader patch applied
+    # it even uses RPATH in a shared library to search for shared objects
+    # that the library depends on, but there's no easy way to know if that
+    # patch is installed.  Since this is the case, all we can really
+    # say is unknown -- it depends on the patch being installed.  If
+    # it is, this changes to `yes'.  Without it, it would be `no'.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  osf*)
+    # the two cases above should catch all versions of osf <= 5.1.  Read
+    # the comments above for what we know about them.
+    # At > 5.1, deplibs are loaded *and* any RPATH in a shared library
+    # is used to find them so we can finally say `yes'.
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  qnx*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  solaris*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    libltdl_cv_sys_dlopen_deplibs=yes
+    ;;
+  esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_dlopen_deplibs" >&5
+$as_echo "$lt_cv_sys_dlopen_deplibs" >&6; }
+if test "$lt_cv_sys_dlopen_deplibs" != yes; then
+
+$as_echo "#define LTDL_DLOPEN_DEPLIBS 1" >>confdefs.h
+
+fi
+
+:
+
+for ac_header in argz.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "argz.h" "ac_cv_header_argz_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_argz_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_ARGZ_H 1
+_ACEOF
+
+fi
+
+done
+
+
+ac_fn_c_check_type "$LINENO" "error_t" "ac_cv_type_error_t" "#if defined(HAVE_ARGZ_H)
+#  include <argz.h>
+#endif
+"
+if test "x$ac_cv_type_error_t" = xyes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_ERROR_T 1
+_ACEOF
+
+
+else
+
+$as_echo "#define error_t int" >>confdefs.h
+
+
+$as_echo "#define __error_t_defined 1" >>confdefs.h
+
+fi
+
+
+ARGZ_H=
+for ac_func in argz_add argz_append argz_count argz_create_sep argz_insert \
+	argz_next argz_stringify
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  ARGZ_H=argz.h; case " $LIBOBJS " in
+  *" argz.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS argz.$ac_objext"
+ ;;
+esac
+
+fi
+done
+
+
+if test -z "$ARGZ_H"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if argz actually works" >&5
+$as_echo_n "checking if argz actually works... " >&6; }
+if ${lt_cv_sys_argz_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host_os in #(
+	 *cygwin*)
+	   lt_cv_sys_argz_works=no
+	   if test "$cross_compiling" != no; then
+	     lt_cv_sys_argz_works="guessing no"
+	   else
+	     lt_sed_extract_leading_digits='s/^\([0-9\.]*\).*/\1/'
+	     save_IFS=$IFS
+	     IFS=-.
+	     set x `uname -r | sed -e "$lt_sed_extract_leading_digits"`
+	     IFS=$save_IFS
+	     lt_os_major=${2-0}
+	     lt_os_minor=${3-0}
+	     lt_os_micro=${4-0}
+	     if test "$lt_os_major" -gt 1 \
+		|| { test "$lt_os_major" -eq 1 \
+		  && { test "$lt_os_minor" -gt 5 \
+		    || { test "$lt_os_minor" -eq 5 \
+		      && test "$lt_os_micro" -gt 24; }; }; }; then
+	       lt_cv_sys_argz_works=yes
+	     fi
+	   fi
+	   ;; #(
+	 *) lt_cv_sys_argz_works=yes ;;
+	 esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_argz_works" >&5
+$as_echo "$lt_cv_sys_argz_works" >&6; }
+     if test "$lt_cv_sys_argz_works" = yes; then :
+
+$as_echo "#define HAVE_WORKING_ARGZ 1" >>confdefs.h
+
+else
+  ARGZ_H=argz.h
+        case " $LIBOBJS " in
+  *" argz.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS argz.$ac_objext"
+ ;;
+esac
+
+fi
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether libtool supports -dlopen/-dlpreopen" >&5
+$as_echo_n "checking whether libtool supports -dlopen/-dlpreopen... " >&6; }
+if ${libltdl_cv_preloaded_symbols+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$lt_cv_sys_global_symbol_pipe"; then
+    libltdl_cv_preloaded_symbols=yes
+  else
+    libltdl_cv_preloaded_symbols=no
+  fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $libltdl_cv_preloaded_symbols" >&5
+$as_echo "$libltdl_cv_preloaded_symbols" >&6; }
+if test x"$libltdl_cv_preloaded_symbols" = xyes; then
+
+$as_echo "#define HAVE_PRELOADED_SYMBOLS 1" >>confdefs.h
+
+fi
+
+
+
+# Check whether --enable-ltdl-install was given.
+if test "${enable_ltdl_install+set}" = set; then :
+  enableval=$enable_ltdl_install;
+fi
+
+
+case ,${enable_ltdl_install},${enable_ltdl_convenience} in
+  *yes*) ;;
+  *) enable_ltdl_convenience=yes ;;
+esac
+
+ if test x"${enable_ltdl_install-no}" != xno; then
+  INSTALL_LTDL_TRUE=
+  INSTALL_LTDL_FALSE='#'
+else
+  INSTALL_LTDL_TRUE='#'
+  INSTALL_LTDL_FALSE=
+fi
+
+  if test x"${enable_ltdl_convenience-no}" != xno; then
+  CONVENIENCE_LTDL_TRUE=
+  CONVENIENCE_LTDL_FALSE='#'
+else
+  CONVENIENCE_LTDL_TRUE='#'
+  CONVENIENCE_LTDL_FALSE=
+fi
+
+
+
+
+
+
+# In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS
+# the user used.  This is so that ltdl.h can pick up the parent projects
+# config.h file, The first file in AC_CONFIG_HEADERS must contain the
+# definitions required by ltdl.c.
+# FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility).
+
+
+
+for ac_header in unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_func in closedir opendir readdir
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  case " $LIBOBJS " in
+  *" lt__dirent.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS lt__dirent.$ac_objext"
+ ;;
+esac
+
+fi
+done
+
+for ac_func in strlcat strlcpy
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+if eval test \"x\$"$as_ac_var"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  case " $LIBOBJS " in
+  *" lt__strl.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS lt__strl.$ac_objext"
+ ;;
+esac
+
+fi
+done
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_LIBEXT "$libext"
+_ACEOF
+
+
+name=
+eval "lt_libprefix=\"$libname_spec\""
+
+cat >>confdefs.h <<_ACEOF
+#define LT_LIBPREFIX "$lt_libprefix"
+_ACEOF
+
+
+name=ltdl
+eval "LTDLOPEN=\"$libname_spec\""
+
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${INSTALL_LTDL_TRUE}" && test -z "${INSTALL_LTDL_FALSE}"; then
+  as_fn_error $? "conditional \"INSTALL_LTDL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${CONVENIENCE_LTDL_TRUE}" && test -z "${CONVENIENCE_LTDL_FALSE}"; then
+  as_fn_error $? "conditional \"CONVENIENCE_LTDL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+LT_CONFIG_H=config.h
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by libltdl $as_me 2.4.2, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+libltdl config.status 2.4.2
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in AS \
+DLLTOOL \
+OBJDUMP \
+SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h:config-h.in" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Assembler program.
+AS=$lt_AS
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$lt_OBJDUMP
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/libltdl/configure.ac b/libltdl/configure.ac
new file mode 100644
index 0000000..b6e9ea9
--- /dev/null
+++ b/libltdl/configure.ac
@@ -0,0 +1,75 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#    Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+#    Written by Gary V. Vaughan, 2004
+#
+#    NOTE: The canonical source of this file is maintained with the
+#    GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+#
+# GNU Libltdl is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2 of the License, or (at your option) any later version.
+#
+# As a special exception to the GNU Lesser General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libltdl is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU LesserGeneral Public
+# License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+# copy can be downloaded from http://www.gnu.org/licenses/lgpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# This configure.ac is not used at all by the libtool bootstrap, but
+# is copied to the ltdl subdirectory if you libtoolize --ltdl your own
+# project.  Adding LT_WITH_LTDL to your project configure.ac will then
+# configure this directory if your user doesn't want to use the installed
+# libltdl.
+
+AC_PREREQ(2.59)dnl We use AS_HELP_STRING
+
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([libltdl], [2.4.2], [bug-libtool@gnu.org])
+AC_CONFIG_HEADERS([config.h:config-h.in])
+AC_CONFIG_SRCDIR([ltdl.c])
+AC_CONFIG_AUX_DIR([config])
+AC_CONFIG_MACRO_DIR([m4])
+LT_CONFIG_LTDL_DIR([.]) # I am me!
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+
+AM_INIT_AUTOMAKE([gnu])
+
+
+## ------------------------------- ##
+## Libtool specific configuration. ##
+## ------------------------------- ##
+pkgdatadir='${datadir}'"/${PACKAGE}"
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LT_INIT([dlopen win32-dll])
+_LTDL_SETUP
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/libltdl/libltdl/lt__alloc.h b/libltdl/libltdl/lt__alloc.h
new file mode 100644
index 0000000..1ceddf0
--- /dev/null
+++ b/libltdl/libltdl/lt__alloc.h
@@ -0,0 +1,58 @@
+/* lt__alloc.h -- internal memory management interface
+
+   Copyright (C) 2004 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA
+*/
+
+#if !defined(LT__ALLOC_H)
+#define LT__ALLOC_H 1
+
+#include "lt_system.h"
+
+LT_BEGIN_C_DECLS
+
+#define MALLOC(tp, n)		(tp*) lt__malloc((n) * sizeof(tp))
+#define REALLOC(tp, mem, n)	(tp*) lt__realloc((mem), (n) * sizeof(tp))
+#define FREE(mem)					LT_STMT_START {	\
+	if (mem) { free ((void *)mem); mem = NULL; }	} LT_STMT_END
+#define MEMREASSIGN(p, q)				LT_STMT_START {	\
+	if ((p) != (q)) { if (p) free (p); (p) = (q); (q) = 0; }	\
+								} LT_STMT_END
+
+/* If set, this function is called when memory allocation has failed.  */
+LT_SCOPE void (*lt__alloc_die) (void);
+
+LT_SCOPE void *lt__malloc (size_t n);
+LT_SCOPE void *lt__zalloc (size_t n);
+LT_SCOPE void *lt__realloc (void *mem, size_t n);
+LT_SCOPE void *lt__memdup (void const *mem, size_t n);
+
+LT_SCOPE char *lt__strdup (const char *string);
+
+LT_END_C_DECLS
+
+#endif /*!defined(LT__ALLOC_H)*/
diff --git a/libltdl/libltdl/lt__dirent.h b/libltdl/libltdl/lt__dirent.h
new file mode 100644
index 0000000..4f24f82
--- /dev/null
+++ b/libltdl/libltdl/lt__dirent.h
@@ -0,0 +1,87 @@
+/* lt__dirent.h -- internal directory entry scanning interface
+
+   Copyright (C) 2001, 2004, 2006 Free Software Foundation, Inc.
+   Written by Bob Friesenhahn, 2001
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA
+*/
+
+#if !defined(LT__DIRENT_H)
+#define LT__DIRENT_H 1
+
+#if defined(LT_CONFIG_H)
+#  include LT_CONFIG_H
+#else
+#  include <config.h>
+#endif
+
+#include "lt_system.h"
+
+#ifdef HAVE_DIRENT_H
+/* We have a fully operational dirent subsystem.  */
+#  include <dirent.h>
+#  define D_NAMLEN(dirent) (strlen((dirent)->d_name))
+
+#elif defined __WINDOWS__
+/* Use some wrapper code to emulate dirent on windows..  */
+#  define WINDOWS_DIRENT_EMULATION 1
+
+#  include <windows.h>
+
+#  define D_NAMLEN(dirent)	(strlen((dirent)->d_name))
+#  define dirent		lt__dirent
+#  define DIR			lt__DIR
+#  define opendir		lt__opendir
+#  define readdir		lt__readdir
+#  define closedir		lt__closedir
+
+LT_BEGIN_C_DECLS
+
+struct dirent
+{
+  char d_name[LT_FILENAME_MAX];
+  int  d_namlen;
+};
+
+typedef struct
+{
+  HANDLE hSearch;
+  WIN32_FIND_DATA Win32FindData;
+  BOOL firsttime;
+  struct dirent file_info;
+} DIR;
+
+
+LT_SCOPE DIR *		opendir		(const char *path);
+LT_SCOPE struct dirent *readdir		(DIR *entry);
+LT_SCOPE void		closedir	(DIR *entry);
+
+LT_END_C_DECLS
+
+#else /* !defined(__WINDOWS__)*/
+ERROR - cannot find dirent
+#endif /*!defined(__WINDOWS__)*/
+
+#endif /*!defined(LT__DIRENT_H)*/
diff --git a/libltdl/libltdl/lt__glibc.h b/libltdl/libltdl/lt__glibc.h
new file mode 100644
index 0000000..f284773
--- /dev/null
+++ b/libltdl/libltdl/lt__glibc.h
@@ -0,0 +1,83 @@
+/* lt__glibc.h -- support for non glibc environments
+
+   Copyright (C) 2004, 2006, 2007 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA
+*/
+
+#if !defined(LT__GLIBC_H)
+#define LT__GLIBC_H 1
+
+#if defined(LT_CONFIG_H)
+#  include LT_CONFIG_H
+#else
+#  include <config.h>
+#endif
+
+#if !defined(HAVE_ARGZ_H) || !defined(HAVE_WORKING_ARGZ)
+/* Redefine any glibc symbols we reimplement to import the
+   implementations into our lt__ namespace so we don't ever
+   clash with the system library if our clients use argz_*
+   from there in addition to libltdl.  */
+#  undef  argz_append
+#  define argz_append		lt__argz_append
+#  undef  argz_create_sep
+#  define argz_create_sep	lt__argz_create_sep
+#  undef  argz_insert
+#  define argz_insert		lt__argz_insert
+#  undef  argz_next
+#  define argz_next		lt__argz_next
+#  undef  argz_stringify
+#  define argz_stringify	lt__argz_stringify
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <argz.h>
+
+#ifdef __cplusplus
+}
+#endif
+
+# define slist_concat	lt__slist_concat
+# define slist_cons	lt__slist_cons
+# define slist_delete	lt__slist_delete
+# define slist_remove	lt__slist_remove
+# define slist_reverse	lt__slist_reverse
+# define slist_sort	lt__slist_sort
+# define slist_tail	lt__slist_tail
+# define slist_nth	lt__slist_nth
+# define slist_find	lt__slist_find
+# define slist_length	lt__slist_length
+# define slist_foreach	lt__slist_foreach
+# define slist_box	lt__slist_box
+# define slist_unbox	lt__slist_unbox
+
+#include <slist.h>
+
+#endif /*!defined(LT__GLIBC_H)*/
diff --git a/libltdl/libltdl/lt__private.h b/libltdl/libltdl/lt__private.h
new file mode 100644
index 0000000..f4c4a3d
--- /dev/null
+++ b/libltdl/libltdl/lt__private.h
@@ -0,0 +1,149 @@
+/* lt__private.h -- internal apis for libltdl
+
+   Copyright (C) 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+This library is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy con be downloaded from http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301  USA
+*/
+
+#if !defined(LT__PRIVATE_H)
+#define LT__PRIVATE_H 1
+
+#if defined(LT_CONFIG_H)
+#  include LT_CONFIG_H
+#else
+#  include <config.h>
+#endif
+
+#include <stdio.h>
+#include <ctype.h>
+#include <assert.h>
+#include <errno.h>
+#include <string.h>
+
+#if defined(HAVE_UNISTD_H)
+#  include <unistd.h>
+#endif
+
+/* Import internal interfaces...  */
+#include "lt__alloc.h"
+#include "lt__dirent.h"
+#include "lt__strl.h"
+#include "lt__glibc.h"
+
+/* ...and all exported interfaces.  */
+#include "ltdl.h"
+
+#if defined(WITH_DMALLOC)
+#  include <dmalloc.h>
+#endif
+
+/* DLL building support on win32 hosts;  mostly to workaround their
+   ridiculous implementation of data symbol exporting. */
+#ifndef LT_GLOBAL_DATA
+# if defined(__WINDOWS__) || defined(__CYGWIN__)
+#  if defined(DLL_EXPORT)	/* defined by libtool (if required) */
+#   define LT_GLOBAL_DATA	__declspec(dllexport)
+#  endif
+# endif
+# ifndef LT_GLOBAL_DATA
+#  define LT_GLOBAL_DATA	/* static linking or !__WINDOWS__ */
+# endif
+#endif
+
+#ifndef __attribute__
+# if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 8) || __STRICT_ANSI__
+#  define __attribute__(x)
+# endif
+#endif
+
+#ifndef LT__UNUSED
+# define LT__UNUSED __attribute__ ((__unused__))
+#endif
+
+
+LT_BEGIN_C_DECLS
+
+#if !defined(errno)
+extern int errno;
+#endif
+
+LT_SCOPE void	lt__alloc_die_callback (void);
+
+
+/* For readability:  */
+#define strneq(s1, s2)	(strcmp((s1), (s2)) != 0)
+#define streq(s1, s2)	(!strcmp((s1), (s2)))
+
+
+
+/* --- OPAQUE STRUCTURES DECLARED IN LTDL.H --- */
+
+/* This type is used for the array of interface data sets in each handler. */
+typedef struct {
+  lt_dlinterface_id	key;
+  void *		data;
+} lt_interface_data;
+
+struct lt__handle {
+  lt_dlhandle		next;
+  const lt_dlvtable *	vtable;		/* dlopening interface */
+  lt_dlinfo		info;		/* user visible fields */
+  int			depcount;	/* number of dependencies */
+  lt_dlhandle *		deplibs;	/* dependencies */
+  lt_module		module;		/* system module handle */
+  void *		system;		/* system specific data */
+  lt_interface_data *	interface_data;	/* per caller associated data */
+  int			flags;		/* various boolean stats */
+};
+
+struct lt__advise {
+  unsigned int	try_ext:1;	/* try system library extensions.  */
+  unsigned int	is_resident:1;	/* module can't be unloaded. */
+  unsigned int	is_symglobal:1;	/* module symbols can satisfy
+				   subsequently loaded modules.  */
+  unsigned int	is_symlocal:1;	/* module symbols are only available
+				   locally. */
+  unsigned int	try_preload_only:1;/* only preloaded modules will be tried. */
+};
+
+/* --- ERROR HANDLING --- */
+
+/* Extract the diagnostic strings from the error table macro in the same
+   order as the enumerated indices in lt_error.h. */
+
+#define LT__STRERROR(name)	lt__error_string(LT_CONC(LT_ERROR_,name))
+
+#define LT__GETERROR(lvalue)	      (lvalue) = lt__get_last_error()
+#define LT__SETERRORSTR(errormsg)     lt__set_last_error(errormsg)
+#define LT__SETERROR(errorcode)	      LT__SETERRORSTR(LT__STRERROR(errorcode))
+
+LT_SCOPE const char *lt__error_string	(int errorcode);
+LT_SCOPE const char *lt__get_last_error	(void);
+LT_SCOPE const char *lt__set_last_error	(const char *errormsg);
+
+LT_END_C_DECLS
+
+#endif /*!defined(LT__PRIVATE_H)*/
diff --git a/libltdl/libltdl/lt__strl.h b/libltdl/libltdl/lt__strl.h
new file mode 100644
index 0000000..5799dc8
--- /dev/null
+++ b/libltdl/libltdl/lt__strl.h
@@ -0,0 +1,53 @@
+/* lt__strl.h -- size-bounded string copying and concatenation
+
+   Copyright (C) 2004, 2006 Free Software Foundation, Inc.
+   Written by Bob Friesenhahn, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#if !defined(LT__STRL_H)
+#define LT__STRL_H 1
+
+#if defined(LT_CONFIG_H)
+#  include LT_CONFIG_H
+#else
+#  include <config.h>
+#endif
+
+#include <string.h>
+#include "lt_system.h"
+
+#if !defined(HAVE_STRLCAT)
+#  define strlcat(dst,src,dstsize) lt_strlcat(dst,src,dstsize)
+LT_SCOPE size_t lt_strlcat(char *dst, const char *src, const size_t dstsize);
+#endif /* !defined(HAVE_STRLCAT) */
+
+#if !defined(HAVE_STRLCPY)
+#  define strlcpy(dst,src,dstsize) lt_strlcpy(dst,src,dstsize)
+LT_SCOPE size_t lt_strlcpy(char *dst, const char *src, const size_t dstsize);
+#endif /* !defined(HAVE_STRLCPY) */
+
+#endif /*!defined(LT__STRL_H)*/
diff --git a/libltdl/libltdl/lt_dlloader.h b/libltdl/libltdl/lt_dlloader.h
new file mode 100644
index 0000000..589fd0d
--- /dev/null
+++ b/libltdl/libltdl/lt_dlloader.h
@@ -0,0 +1,90 @@
+/* lt_dlloader.h -- dynamic library loader interface
+
+   Copyright (C) 2004, 2007, 2008 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#if !defined(LT_DLLOADER_H)
+#define LT_DLLOADER_H 1
+
+#include <libltdl/lt_system.h>
+
+LT_BEGIN_C_DECLS
+
+typedef	void *	lt_dlloader;
+typedef void *	lt_module;
+typedef void *	lt_user_data;
+typedef struct lt__advise *	lt_dladvise;
+
+/* Function pointer types for module loader vtable entries:  */
+typedef lt_module   lt_module_open	(lt_user_data data,
+					 const char *filename,
+					 lt_dladvise advise);
+typedef int	    lt_module_close	(lt_user_data data,
+					 lt_module module);
+typedef void *	    lt_find_sym		(lt_user_data data, lt_module module,
+					 const char *symbolname);
+typedef int	    lt_dlloader_init	(lt_user_data data);
+typedef int	    lt_dlloader_exit	(lt_user_data data);
+
+/* Default priority is LT_DLLOADER_PREPEND if none is explicitly given.  */
+typedef enum {
+  LT_DLLOADER_PREPEND = 0, LT_DLLOADER_APPEND
+} lt_dlloader_priority;
+
+/* This structure defines a module loader, as populated by the get_vtable
+   entry point of each loader.  */
+typedef struct {
+  const char *		name;
+  const char *		sym_prefix;
+  lt_module_open *	module_open;
+  lt_module_close *	module_close;
+  lt_find_sym *		find_sym;
+  lt_dlloader_init *	dlloader_init;
+  lt_dlloader_exit *	dlloader_exit;
+  lt_user_data		dlloader_data;
+  lt_dlloader_priority	priority;
+} lt_dlvtable;
+
+LT_SCOPE int		lt_dlloader_add	   (const lt_dlvtable *vtable);
+LT_SCOPE lt_dlloader	lt_dlloader_next   (const lt_dlloader loader);
+
+LT_SCOPE lt_dlvtable *	lt_dlloader_remove	(const char *name);
+LT_SCOPE const lt_dlvtable *lt_dlloader_find	(const char *name);
+LT_SCOPE const lt_dlvtable *lt_dlloader_get	(lt_dlloader loader);
+
+
+/* Type of a function to get a loader's vtable:  */
+typedef  const lt_dlvtable *lt_get_vtable	(lt_user_data data);
+
+#ifdef LT_DEBUG_LOADERS
+LT_SCOPE void		lt_dlloader_dump	(void);
+#endif
+
+LT_END_C_DECLS
+
+#endif /*!defined(LT_DLLOADER_H)*/
diff --git a/libltdl/libltdl/lt_error.h b/libltdl/libltdl/lt_error.h
new file mode 100644
index 0000000..e789b3a
--- /dev/null
+++ b/libltdl/libltdl/lt_error.h
@@ -0,0 +1,85 @@
+/* lt_error.h -- error propogation interface
+
+   Copyright (C) 1999, 2000, 2001, 2004, 2007 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1999
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#if !defined(LT_ERROR_H)
+#define LT_ERROR_H 1
+
+#include <libltdl/lt_system.h>
+
+LT_BEGIN_C_DECLS
+
+/* Defining error strings alongside their symbolic names in a macro in
+   this way allows us to expand the macro in different contexts with
+   confidence that the enumeration of symbolic names will map correctly
+   onto the table of error strings.  \0 is appended to the strings to
+   expilicitely initialize the string terminator. */
+#define lt_dlerror_table						\
+    LT_ERROR(UNKNOWN,		    "unknown error\0")			\
+    LT_ERROR(DLOPEN_NOT_SUPPORTED,  "dlopen support not available\0")	\
+    LT_ERROR(INVALID_LOADER,	    "invalid loader\0")			\
+    LT_ERROR(INIT_LOADER,	    "loader initialization failed\0")	\
+    LT_ERROR(REMOVE_LOADER,	    "loader removal failed\0")		\
+    LT_ERROR(FILE_NOT_FOUND,	    "file not found\0")			\
+    LT_ERROR(DEPLIB_NOT_FOUND,	    "dependency library not found\0")	\
+    LT_ERROR(NO_SYMBOLS,	    "no symbols defined\0")		\
+    LT_ERROR(CANNOT_OPEN,	    "can't open the module\0")		\
+    LT_ERROR(CANNOT_CLOSE,	    "can't close the module\0")		\
+    LT_ERROR(SYMBOL_NOT_FOUND,	    "symbol not found\0")		\
+    LT_ERROR(NO_MEMORY,		    "not enough memory\0")		\
+    LT_ERROR(INVALID_HANDLE,	    "invalid module handle\0")		\
+    LT_ERROR(BUFFER_OVERFLOW,	    "internal buffer overflow\0")	\
+    LT_ERROR(INVALID_ERRORCODE,	    "invalid errorcode\0")		\
+    LT_ERROR(SHUTDOWN,		    "library already shutdown\0")	\
+    LT_ERROR(CLOSE_RESIDENT_MODULE, "can't close resident module\0")	\
+    LT_ERROR(INVALID_MUTEX_ARGS,    "internal error (code withdrawn)\0")\
+    LT_ERROR(INVALID_POSITION,	    "invalid search path insert position\0")\
+    LT_ERROR(CONFLICTING_FLAGS,	    "symbol visibility can be global or local\0")
+
+/* Enumerate the symbolic error names. */
+enum {
+#define LT_ERROR(name, diagnostic)	LT_CONC(LT_ERROR_, name),
+	lt_dlerror_table
+#undef LT_ERROR
+
+	LT_ERROR_MAX
+};
+
+/* Should be max of the error string lengths above (plus one for C++) */
+#define LT_ERROR_LEN_MAX (41)
+
+/* These functions are only useful from inside custom module loaders. */
+LT_SCOPE int	lt_dladderror	(const char *diagnostic);
+LT_SCOPE int	lt_dlseterror	(int errorcode);
+
+
+LT_END_C_DECLS
+
+#endif /*!defined(LT_ERROR_H)*/
diff --git a/libltdl/libltdl/lt_system.h b/libltdl/libltdl/lt_system.h
new file mode 100644
index 0000000..f1545ce
--- /dev/null
+++ b/libltdl/libltdl/lt_system.h
@@ -0,0 +1,166 @@
+/* lt_system.h -- system portability abstraction layer
+
+   Copyright (C) 2004, 2007, 2010 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#if !defined(LT_SYSTEM_H)
+#define LT_SYSTEM_H 1
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <sys/types.h>
+
+/* Some systems do not define EXIT_*, even with STDC_HEADERS.  */
+#if !defined(EXIT_SUCCESS)
+# define EXIT_SUCCESS 0
+#endif
+#if !defined(EXIT_FAILURE)
+# define EXIT_FAILURE 1
+#endif
+
+/* Just pick a big number... */
+#define LT_FILENAME_MAX 2048
+
+
+/* Saves on those hard to debug '\0' typos....  */
+#define LT_EOS_CHAR	'\0'
+
+/* LTDL_BEGIN_C_DECLS should be used at the beginning of your declarations,
+   so that C++ compilers don't mangle their names.  Use LTDL_END_C_DECLS at
+   the end of C declarations. */
+#if defined(__cplusplus)
+# define LT_BEGIN_C_DECLS	extern "C" {
+# define LT_END_C_DECLS		}
+#else
+# define LT_BEGIN_C_DECLS	/* empty */
+# define LT_END_C_DECLS		/* empty */
+#endif
+
+/* LT_STMT_START/END are used to create macros which expand to a
+   a single compound statement in a portable way.  */
+#if defined (__GNUC__) && !defined (__STRICT_ANSI__) && !defined (__cplusplus)
+#  define LT_STMT_START        (void)(
+#  define LT_STMT_END          )
+#else
+#  if (defined (sun) || defined (__sun__))
+#    define LT_STMT_START      if (1)
+#    define LT_STMT_END        else (void)0
+#  else
+#    define LT_STMT_START      do
+#    define LT_STMT_END        while (0)
+#  endif
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* Canonicalise Windows and Cygwin recognition macros.
+   To match the values set by recent Cygwin compilers, make sure that if
+   __CYGWIN__ is defined (after canonicalisation), __WINDOWS__ is NOT!  */
+#if defined(__CYGWIN32__) && !defined(__CYGWIN__)
+# define __CYGWIN__ __CYGWIN32__
+#endif
+#if defined(__CYGWIN__)
+# if defined(__WINDOWS__)
+#   undef __WINDOWS__
+# endif
+#elif defined(_WIN32)
+# define __WINDOWS__ _WIN32
+#elif defined(WIN32)
+# define __WINDOWS__ WIN32
+#endif
+#if defined(__CYGWIN__) && defined(__WINDOWS__)
+# undef __WINDOWS__
+#endif
+
+
+/* DLL building support on win32 hosts;  mostly to workaround their
+   ridiculous implementation of data symbol exporting. */
+#if !defined(LT_SCOPE)
+#  if defined(__WINDOWS__) || defined(__CYGWIN__)
+#    if defined(DLL_EXPORT)		/* defined by libtool (if required) */
+#      define LT_SCOPE	extern __declspec(dllexport)
+#    endif
+#    if defined(LIBLTDL_DLL_IMPORT)	/* define if linking with this dll */
+       /* note: cygwin/mingw compilers can rely instead on auto-import */
+#      define LT_SCOPE	extern __declspec(dllimport)
+#    endif
+#  endif
+#  if !defined(LT_SCOPE)		/* static linking or !__WINDOWS__ */
+#    define LT_SCOPE	extern
+#  endif
+#endif
+
+#if defined(__WINDOWS__)
+/* LT_DIRSEP_CHAR is accepted *in addition* to '/' as a directory
+   separator when it is set. */
+# define LT_DIRSEP_CHAR		'\\'
+# define LT_PATHSEP_CHAR	';'
+#else
+# define LT_PATHSEP_CHAR	':'
+#endif
+
+#if defined(_MSC_VER) /* Visual Studio */
+#  define R_OK 4
+#endif
+
+/* fopen() mode flags for reading a text file */
+#undef	LT_READTEXT_MODE
+#if defined(__WINDOWS__) || defined(__CYGWIN__)
+#  define LT_READTEXT_MODE "rt"
+#else
+#  define LT_READTEXT_MODE "r"
+#endif
+
+/* The extra indirection to the LT__STR and LT__CONC macros is required so
+   that if the arguments to LT_STR() (or LT_CONC()) are themselves macros,
+   they will be expanded before being quoted.   */
+#ifndef LT_STR
+#  define LT__STR(arg)		#arg
+#  define LT_STR(arg)		LT__STR(arg)
+#endif
+
+#ifndef LT_CONC
+#  define LT__CONC(a, b)	a##b
+#  define LT_CONC(a, b)		LT__CONC(a, b)
+#endif
+#ifndef LT_CONC3
+#  define LT__CONC3(a, b, c)	a##b##c
+#  define LT_CONC3(a, b, c)	LT__CONC3(a, b, c)
+#endif
+
+#endif /*!defined(LT_SYSTEM_H)*/
diff --git a/libltdl/libltdl/slist.h b/libltdl/libltdl/slist.h
new file mode 100644
index 0000000..4d56509
--- /dev/null
+++ b/libltdl/libltdl/slist.h
@@ -0,0 +1,96 @@
+/* slist.h -- generalised singly linked lists
+
+   Copyright (C) 2000, 2004, 2009 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2000
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* A generalised list.  This is deliberately transparent so that you
+   can make the NEXT field of all your chained data structures first,
+   and then cast them to `(SList *)' so that they can be manipulated
+   by this API.
+
+   Alternatively, you can generate raw SList elements using slist_new(),
+   and put the element data in the USERDATA field.  Either way you
+   get to manage the memory involved by yourself.
+*/
+
+#if !defined(SLIST_H)
+#define SLIST_H 1
+
+#if defined(LTDL)
+#  include <libltdl/lt__glibc.h>
+#  include <libltdl/lt_system.h>
+#else
+#  define LT_SCOPE
+#endif
+
+#include <stddef.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+typedef struct slist {
+  struct slist *next;		/* chain forward pointer*/
+  const void *userdata;		/* for boxed `SList' item */
+} SList;
+
+typedef void *	SListCallback	(SList *item, void *userdata);
+typedef int	SListCompare	(const SList *item1, const SList *item2,
+				 void *userdata);
+
+LT_SCOPE SList *slist_concat	(SList *head, SList *tail);
+LT_SCOPE SList *slist_cons	(SList *item, SList *slist);
+
+LT_SCOPE SList *slist_delete	(SList *slist, void (*delete_fct) (void *item));
+LT_SCOPE SList *slist_remove	(SList **phead, SListCallback *find,
+				 void *matchdata);
+LT_SCOPE SList *slist_reverse	(SList *slist);
+LT_SCOPE SList *slist_sort	(SList *slist, SListCompare *compare,
+				 void *userdata);
+
+LT_SCOPE SList *slist_tail	(SList *slist);
+LT_SCOPE SList *slist_nth	(SList *slist, size_t n);
+LT_SCOPE void *	slist_find	(SList *slist, SListCallback *find,
+				 void *matchdata);
+LT_SCOPE size_t slist_length	(SList *slist);
+
+LT_SCOPE void *	slist_foreach   (SList *slist, SListCallback *foreach,
+				 void *userdata);
+
+LT_SCOPE SList *slist_box	(const void *userdata);
+LT_SCOPE void *	slist_unbox	(SList *item);
+
+#if defined(__cplusplus)
+}
+#endif
+
+#if !defined(LTDL)
+#  undef LT_SCOPE
+#endif
+
+#endif /*!defined(SLIST_H)*/
diff --git a/libltdl/loaders/dld_link.c b/libltdl/loaders/dld_link.c
new file mode 100644
index 0000000..7e882c9
--- /dev/null
+++ b/libltdl/loaders/dld_link.c
@@ -0,0 +1,158 @@
+/* loader-dld_link.c -- dynamic linking with dld
+
+   Copyright (C) 1998, 1999, 2000, 2004, 2006,
+                 2007, 2008 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_dlloader.h"
+
+/* Use the preprocessor to rename non-static symbols to avoid namespace
+   collisions when the loader code is statically linked into libltdl.
+   Use the "<module_name>_LTX_" prefix so that the symbol addresses can
+   be fetched from the preloaded symbol list by lt_dlsym():  */
+#define get_vtable	dld_link_LTX_get_vtable
+
+LT_BEGIN_C_DECLS
+LT_SCOPE lt_dlvtable *get_vtable (lt_user_data loader_data);
+LT_END_C_DECLS
+
+
+/* Boilerplate code to set up the vtable for hooking this loader into
+   libltdl's loader list:  */
+static int	 vl_exit  (lt_user_data loader_data);
+static lt_module vm_open  (lt_user_data loader_data, const char *filename,
+                           lt_dladvise advise);
+static int	 vm_close (lt_user_data loader_data, lt_module module);
+static void *	 vm_sym   (lt_user_data loader_data, lt_module module,
+			  const char *symbolname);
+
+static lt_dlvtable *vtable = 0;
+
+/* Return the vtable for this loader, only the name and sym_prefix
+   attributes (plus the virtual function implementations, obviously)
+   change between loaders.  */
+lt_dlvtable *
+get_vtable (lt_user_data loader_data)
+{
+  if (!vtable)
+    {
+      vtable = lt__zalloc (sizeof *vtable);
+    }
+
+  if (vtable && !vtable->name)
+    {
+      vtable->name		= "lt_dld_link";
+      vtable->module_open	= vm_open;
+      vtable->module_close	= vm_close;
+      vtable->find_sym		= vm_sym;
+      vtable->dlloader_exit	= vl_exit;
+      vtable->dlloader_data	= loader_data;
+      vtable->priority		= LT_DLLOADER_APPEND;
+    }
+
+  if (vtable && (vtable->dlloader_data != loader_data))
+    {
+      LT__SETERROR (INIT_LOADER);
+      return 0;
+    }
+
+  return vtable;
+}
+
+
+
+/* --- IMPLEMENTATION --- */
+
+
+#if defined(HAVE_DLD_H)
+#  include <dld.h>
+#endif
+
+/* A function called through the vtable when this loader is no
+   longer needed by the application.  */
+static int
+vl_exit (lt_user_data LT__UNUSED loader_data)
+{
+  vtable = NULL;
+  return 0;
+}
+
+/* A function called through the vtable to open a module with this
+   loader.  Returns an opaque representation of the newly opened
+   module for processing with this loader's other vtable functions.  */
+static lt_module
+vm_open (lt_user_data LT__UNUSED loader_data, const char *filename,
+         lt_dladvise LT__UNUSED advise)
+{
+  lt_module module = lt__strdup (filename);
+
+  if (dld_link (filename) != 0)
+    {
+      LT__SETERROR (CANNOT_OPEN);
+      FREE (module);
+    }
+
+  return module;
+}
+
+/* A function called through the vtable when a particular module
+   should be unloaded.  */
+static int
+vm_close (lt_user_data LT__UNUSED loader_data, lt_module module)
+{
+  int errors = 0;
+
+  if (dld_unlink_by_file ((char*)(module), 1) != 0)
+    {
+      LT__SETERROR (CANNOT_CLOSE);
+      ++errors;
+    }
+  else
+    {
+      FREE (module);
+    }
+
+  return errors;
+}
+
+/* A function called through the vtable to get the address of
+   a symbol loaded from a particular module.  */
+static void *
+vm_sym (lt_user_data LT__UNUSED loader_data, lt_module LT__UNUSED module,
+	const char *name)
+{
+  void *address = dld_get_func (name);
+
+  if (!address)
+    {
+      LT__SETERROR (SYMBOL_NOT_FOUND);
+    }
+
+  return address;
+}
diff --git a/libltdl/loaders/dlopen.c b/libltdl/loaders/dlopen.c
new file mode 100644
index 0000000..1d052b4
--- /dev/null
+++ b/libltdl/loaders/dlopen.c
@@ -0,0 +1,235 @@
+/* loader-dlopen.c --  dynamic linking with dlopen/dlsym
+
+   Copyright (C) 1998, 1999, 2000, 2004, 2006,
+                 2007, 2008 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_dlloader.h"
+
+/* Use the preprocessor to rename non-static symbols to avoid namespace
+   collisions when the loader code is statically linked into libltdl.
+   Use the "<module_name>_LTX_" prefix so that the symbol addresses can
+   be fetched from the preloaded symbol list by lt_dlsym():  */
+#define get_vtable	dlopen_LTX_get_vtable
+
+LT_BEGIN_C_DECLS
+LT_SCOPE lt_dlvtable *get_vtable (lt_user_data loader_data);
+LT_END_C_DECLS
+
+
+/* Boilerplate code to set up the vtable for hooking this loader into
+   libltdl's loader list:  */
+static int	 vl_exit  (lt_user_data loader_data);
+static lt_module vm_open  (lt_user_data loader_data, const char *filename,
+                           lt_dladvise advise);
+static int	 vm_close (lt_user_data loader_data, lt_module module);
+static void *	 vm_sym   (lt_user_data loader_data, lt_module module,
+			  const char *symbolname);
+
+static lt_dlvtable *vtable = 0;
+
+/* Return the vtable for this loader, only the name and sym_prefix
+   attributes (plus the virtual function implementations, obviously)
+   change between loaders.  */
+lt_dlvtable *
+get_vtable (lt_user_data loader_data)
+{
+  if (!vtable)
+    {
+      vtable = (lt_dlvtable *) lt__zalloc (sizeof *vtable);
+    }
+
+  if (vtable && !vtable->name)
+    {
+      vtable->name		= "lt_dlopen";
+#if defined(DLSYM_USCORE)
+      vtable->sym_prefix	= "_";
+#endif
+      vtable->module_open	= vm_open;
+      vtable->module_close	= vm_close;
+      vtable->find_sym		= vm_sym;
+      vtable->dlloader_exit	= vl_exit;
+      vtable->dlloader_data	= loader_data;
+      vtable->priority		= LT_DLLOADER_PREPEND;
+    }
+
+  if (vtable && (vtable->dlloader_data != loader_data))
+    {
+      LT__SETERROR (INIT_LOADER);
+      return 0;
+    }
+
+  return vtable;
+}
+
+
+
+/* --- IMPLEMENTATION --- */
+
+
+#if defined(HAVE_DLFCN_H)
+#  include <dlfcn.h>
+#endif
+
+#if defined(HAVE_SYS_DL_H)
+#  include <sys/dl.h>
+#endif
+
+
+/* We may have to define LT_LAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#if !defined(LT_LAZY_OR_NOW)
+#  if defined(RTLD_LAZY)
+#    define LT_LAZY_OR_NOW	RTLD_LAZY
+#  else
+#    if defined(DL_LAZY)
+#      define LT_LAZY_OR_NOW	DL_LAZY
+#    endif
+#  endif /* !RTLD_LAZY */
+#endif
+#if !defined(LT_LAZY_OR_NOW)
+#  if defined(RTLD_NOW)
+#    define LT_LAZY_OR_NOW	RTLD_NOW
+#  else
+#    if defined(DL_NOW)
+#      define LT_LAZY_OR_NOW	DL_NOW
+#    endif
+#  endif /* !RTLD_NOW */
+#endif
+#if !defined(LT_LAZY_OR_NOW)
+#  define LT_LAZY_OR_NOW	0
+#endif /* !LT_LAZY_OR_NOW */
+
+/* We only support local and global symbols from modules for loaders
+   that provide such a thing, otherwise the system default is used.  */
+#if !defined(RTLD_GLOBAL)
+#  if defined(DL_GLOBAL)
+#    define RTLD_GLOBAL		DL_GLOBAL
+#  endif
+#endif /* !RTLD_GLOBAL */
+#if !defined(RTLD_LOCAL)
+#  if defined(DL_LOCAL)
+#    define RTLD_LOCAL		DL_LOCAL
+#  endif
+#endif /* !RTLD_LOCAL */
+
+#if defined(HAVE_DLERROR)
+#  define DLERROR(arg)	dlerror ()
+#else
+#  define DLERROR(arg)	LT__STRERROR (arg)
+#endif
+
+#define DL__SETERROR(errorcode) \
+	LT__SETERRORSTR (DLERROR (errorcode))
+
+
+/* A function called through the vtable when this loader is no
+   longer needed by the application.  */
+static int
+vl_exit (lt_user_data LT__UNUSED loader_data)
+{
+  vtable = NULL;
+  return 0;
+}
+
+
+/* A function called through the vtable to open a module with this
+   loader.  Returns an opaque representation of the newly opened
+   module for processing with this loader's other vtable functions.  */
+static lt_module
+vm_open (lt_user_data LT__UNUSED loader_data, const char *filename,
+         lt_dladvise advise)
+{
+  int		module_flags = LT_LAZY_OR_NOW;
+  lt_module	module;
+
+  if (advise)
+    {
+#ifdef RTLD_GLOBAL
+      /* If there is some means of asking for global symbol resolution,
+         do so.  */
+      if (advise->is_symglobal)
+        module_flags |= RTLD_GLOBAL;
+#else
+      /* Otherwise, reset that bit so the caller can tell it wasn't
+         acted on.  */
+      advise->is_symglobal = 0;
+#endif
+
+/* And similarly for local only symbol resolution.  */
+#ifdef RTLD_LOCAL
+      if (advise->is_symlocal)
+        module_flags |= RTLD_LOCAL;
+#else
+      advise->is_symlocal = 0;
+#endif
+    }
+
+  module = dlopen (filename, module_flags);
+
+  if (!module)
+    {
+      DL__SETERROR (CANNOT_OPEN);
+    }
+
+  return module;
+}
+
+
+/* A function called through the vtable when a particular module
+   should be unloaded.  */
+static int
+vm_close (lt_user_data LT__UNUSED loader_data, lt_module module)
+{
+  int errors = 0;
+
+  if (dlclose (module) != 0)
+    {
+      DL__SETERROR (CANNOT_CLOSE);
+      ++errors;
+    }
+
+  return errors;
+}
+
+
+/* A function called through the vtable to get the address of
+   a symbol loaded from a particular module.  */
+static void *
+vm_sym (lt_user_data LT__UNUSED loader_data, lt_module module, const char *name)
+{
+  void *address = dlsym (module, name);
+
+  if (!address)
+    {
+      DL__SETERROR (SYMBOL_NOT_FOUND);
+    }
+
+  return address;
+}
diff --git a/libltdl/loaders/dyld.c b/libltdl/loaders/dyld.c
new file mode 100644
index 0000000..b139d6c
--- /dev/null
+++ b/libltdl/loaders/dyld.c
@@ -0,0 +1,511 @@
+/* loader-dyld.c -- dynamic linking on darwin and OS X
+
+   Copyright (C) 1998, 1999, 2000, 2004, 2006,
+                 2007, 2008 Free Software Foundation, Inc.
+   Written by Peter O'Gorman, 1998
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_dlloader.h"
+
+/* Use the preprocessor to rename non-static symbols to avoid namespace
+   collisions when the loader code is statically linked into libltdl.
+   Use the "<module_name>_LTX_" prefix so that the symbol addresses can
+   be fetched from the preloaded symbol list by lt_dlsym():  */
+#define get_vtable	dyld_LTX_get_vtable
+
+LT_BEGIN_C_DECLS
+LT_SCOPE lt_dlvtable *get_vtable (lt_user_data loader_data);
+LT_END_C_DECLS
+
+
+/* Boilerplate code to set up the vtable for hooking this loader into
+   libltdl's loader list:  */
+static int	 vl_init  (lt_user_data loader_data);
+static int	 vl_exit  (lt_user_data loader_data);
+static lt_module vm_open  (lt_user_data loader_data, const char *filename,
+                           lt_dladvise advise);
+static int	 vm_close (lt_user_data loader_data, lt_module module);
+static void *	 vm_sym   (lt_user_data loader_data, lt_module module,
+			  const char *symbolname);
+
+static lt_dlvtable *vtable = 0;
+
+/* Return the vtable for this loader, only the name and sym_prefix
+   attributes (plus the virtual function implementations, obviously)
+   change between loaders.  */
+lt_dlvtable *
+get_vtable (lt_user_data loader_data)
+{
+  if (!vtable)
+    {
+      vtable = lt__zalloc (sizeof *vtable);
+    }
+
+  if (vtable && !vtable->name)
+    {
+      vtable->name		= "lt_dyld";
+      vtable->sym_prefix	= "_";
+      vtable->dlloader_init	= vl_init;
+      vtable->module_open	= vm_open;
+      vtable->module_close	= vm_close;
+      vtable->find_sym		= vm_sym;
+      vtable->dlloader_exit	= vl_exit;
+      vtable->dlloader_data	= loader_data;
+      vtable->priority		= LT_DLLOADER_APPEND;
+    }
+
+  if (vtable && (vtable->dlloader_data != loader_data))
+    {
+      LT__SETERROR (INIT_LOADER);
+      return 0;
+    }
+
+  return vtable;
+}
+
+
+
+/* --- IMPLEMENTATION --- */
+
+
+#if defined(HAVE_MACH_O_DYLD_H)
+#  if !defined(__APPLE_CC__) && !defined(__MWERKS__) && !defined(__private_extern__)
+  /* Is this correct? Does it still function properly? */
+#    define __private_extern__ extern
+#  endif
+#  include <mach-o/dyld.h>
+#endif
+
+#include <mach-o/getsect.h>
+
+/* We have to put some stuff here that isn't in older dyld.h files */
+#if !defined(ENUM_DYLD_BOOL)
+# define ENUM_DYLD_BOOL
+# undef FALSE
+# undef TRUE
+ enum DYLD_BOOL {
+    FALSE,
+    TRUE
+ };
+#endif
+#if !defined(LC_REQ_DYLD)
+# define LC_REQ_DYLD 0x80000000
+#endif
+#if !defined(LC_LOAD_WEAK_DYLIB)
+# define LC_LOAD_WEAK_DYLIB (0x18 | LC_REQ_DYLD)
+#endif
+
+#if !defined(NSADDIMAGE_OPTION_NONE)
+#  define NSADDIMAGE_OPTION_NONE                          0x0
+#endif
+#if !defined(NSADDIMAGE_OPTION_RETURN_ON_ERROR)
+#  define NSADDIMAGE_OPTION_RETURN_ON_ERROR               0x1
+#endif
+#if !defined(NSADDIMAGE_OPTION_WITH_SEARCHING)
+#  define NSADDIMAGE_OPTION_WITH_SEARCHING                0x2
+#endif
+#if !defined(NSADDIMAGE_OPTION_RETURN_ONLY_IF_LOADED)
+#  define NSADDIMAGE_OPTION_RETURN_ONLY_IF_LOADED         0x4
+#endif
+#if !defined(NSADDIMAGE_OPTION_MATCH_FILENAME_BY_INSTALLNAME)
+#  define NSADDIMAGE_OPTION_MATCH_FILENAME_BY_INSTALLNAME 0x8
+#endif
+
+#if !defined(NSLOOKUPSYMBOLINIMAGE_OPTION_BIND)
+#  define NSLOOKUPSYMBOLINIMAGE_OPTION_BIND               0x0
+#endif
+#if !defined(NSLOOKUPSYMBOLINIMAGE_OPTION_BIND_NOW)
+#  define NSLOOKUPSYMBOLINIMAGE_OPTION_BIND_NOW           0x1
+#endif
+#if !defined(NSLOOKUPSYMBOLINIMAGE_OPTION_BIND_FULLY)
+#  define NSLOOKUPSYMBOLINIMAGE_OPTION_BIND_FULLY         0x2
+#endif
+#if !defined(NSLOOKUPSYMBOLINIMAGE_OPTION_RETURN_ON_ERROR)
+#  define NSLOOKUPSYMBOLINIMAGE_OPTION_RETURN_ON_ERROR    0x4
+#endif
+
+#define LT__SYMLOOKUP_OPTS	(NSLOOKUPSYMBOLINIMAGE_OPTION_BIND_NOW \
+				| NSLOOKUPSYMBOLINIMAGE_OPTION_RETURN_ON_ERROR)
+
+#if defined(__BIG_ENDIAN__)
+#  define LT__MAGIC	MH_MAGIC
+#else
+#  define LT__MAGIC	MH_CIGAM
+#endif
+
+#define DYLD__SETMYERROR(errmsg)    LT__SETERRORSTR (dylderror (errmsg))
+#define DYLD__SETERROR(errcode)	    DYLD__SETMYERROR (LT__STRERROR (errcode))
+
+typedef struct mach_header mach_header;
+typedef struct dylib_command dylib_command;
+
+static const char *dylderror (const char *errmsg);
+static const mach_header *lt__nsmodule_get_header (NSModule module);
+static const char *lt__header_get_instnam (const mach_header *mh);
+static const mach_header *lt__match_loadedlib (const char *name);
+static NSSymbol lt__linkedlib_symbol (const char *symname, const mach_header *mh);
+
+static const mach_header *(*lt__addimage)	(const char *image_name,
+						 unsigned long options) = 0;
+static NSSymbol	(*lt__image_symbol)		(const mach_header *image,
+						 const char *symbolName,
+						 unsigned long options) = 0;
+static enum DYLD_BOOL (*lt__image_symbol_p)	(const mach_header *image,
+						 const char *symbolName) = 0;
+static enum DYLD_BOOL (*lt__module_export)	(NSModule module) = 0;
+
+static int dyld_cannot_close				  = 0;
+
+
+/* A function called through the vtable when this loader is no
+   longer needed by the application.  */
+static int
+vl_exit (lt_user_data LT__UNUSED loader_data)
+{
+  vtable = NULL;
+  return 0;
+}
+
+/* A function called through the vtable to initialise this loader.  */
+static int
+vl_init (lt_user_data loader_data)
+{
+  int errors = 0;
+
+  if (! dyld_cannot_close)
+    {
+      if (!_dyld_present ())
+	{
+	  ++errors;
+	}
+      else
+	{
+	  (void) _dyld_func_lookup ("__dyld_NSAddImage",
+				    (unsigned long*) &lt__addimage);
+	  (void) _dyld_func_lookup ("__dyld_NSLookupSymbolInImage",
+				    (unsigned long*)&lt__image_symbol);
+	  (void) _dyld_func_lookup ("__dyld_NSIsSymbolNameDefinedInImage",
+				    (unsigned long*) &lt__image_symbol_p);
+	  (void) _dyld_func_lookup ("__dyld_NSMakePrivateModulePublic",
+				    (unsigned long*) &lt__module_export);
+	  dyld_cannot_close = lt_dladderror ("can't close a dylib");
+	}
+    }
+
+  return errors;
+}
+
+
+/* A function called through the vtable to open a module with this
+   loader.  Returns an opaque representation of the newly opened
+   module for processing with this loader's other vtable functions.  */
+static lt_module
+vm_open (lt_user_data loader_data, const char *filename,
+         lt_dladvise LT__UNUSED advise)
+{
+  lt_module module = 0;
+  NSObjectFileImage ofi = 0;
+
+  if (!filename)
+    {
+      return (lt_module) -1;
+    }
+
+  switch (NSCreateObjectFileImageFromFile (filename, &ofi))
+    {
+    case NSObjectFileImageSuccess:
+      module = NSLinkModule (ofi, filename, NSLINKMODULE_OPTION_RETURN_ON_ERROR
+			     		    | NSLINKMODULE_OPTION_PRIVATE
+			     		    | NSLINKMODULE_OPTION_BINDNOW);
+      NSDestroyObjectFileImage (ofi);
+
+      if (module)
+	{
+	  lt__module_export (module);
+	}
+      break;
+
+    case NSObjectFileImageInappropriateFile:
+      if (lt__image_symbol_p && lt__image_symbol)
+	{
+	  module = (lt_module) lt__addimage(filename,
+					    NSADDIMAGE_OPTION_RETURN_ON_ERROR);
+	}
+      break;
+
+    case NSObjectFileImageFailure:
+    case NSObjectFileImageArch:
+    case NSObjectFileImageFormat:
+    case NSObjectFileImageAccess:
+      /*NOWORK*/
+      break;
+    }
+
+  if (!module)
+    {
+      DYLD__SETERROR (CANNOT_OPEN);
+    }
+
+  return module;
+}
+
+
+/* A function called through the vtable when a particular module
+   should be unloaded.  */
+static int
+vm_close (lt_user_data loader_data, lt_module module)
+{
+  int errors = 0;
+
+  if (module != (lt_module) -1)
+    {
+      const mach_header *mh = (const mach_header *) module;
+      int flags = 0;
+      if (mh->magic == LT__MAGIC)
+	{
+	  lt_dlseterror (dyld_cannot_close);
+	  ++errors;
+	}
+      else
+	{
+	  /* Currently, if a module contains c++ static destructors and it
+	     is unloaded, we get a segfault in atexit(), due to compiler and
+	     dynamic loader differences of opinion, this works around that.  */
+	  if ((const struct section *) NULL !=
+	      getsectbynamefromheader (lt__nsmodule_get_header (module),
+				       "__DATA", "__mod_term_func"))
+	    {
+	      flags |= NSUNLINKMODULE_OPTION_KEEP_MEMORY_MAPPED;
+	    }
+#if defined(__ppc__)
+	  flags |= NSUNLINKMODULE_OPTION_RESET_LAZY_REFERENCES;
+#endif
+	  if (!NSUnLinkModule (module, flags))
+	    {
+	      DYLD__SETERROR (CANNOT_CLOSE);
+	      ++errors;
+	    }
+	}
+    }
+
+  return errors;
+}
+
+/* A function called through the vtable to get the address of
+   a symbol loaded from a particular module.  */
+static void *
+vm_sym (lt_user_data loader_data, lt_module module, const char *name)
+{
+  NSSymbol *nssym = 0;
+  const mach_header *mh = (const mach_header *) module;
+  char saveError[256] = "Symbol not found";
+
+  if (module == (lt_module) -1)
+    {
+      void *address, *unused;
+      _dyld_lookup_and_bind (name, (unsigned long*) &address, &unused);
+      return address;
+    }
+
+  if (mh->magic == LT__MAGIC)
+    {
+      if (lt__image_symbol_p && lt__image_symbol)
+	{
+	  if (lt__image_symbol_p (mh, name))
+	    {
+	      nssym = lt__image_symbol (mh, name, LT__SYMLOOKUP_OPTS);
+	    }
+	}
+
+    }
+  else
+    {
+      nssym = NSLookupSymbolInModule (module, name);
+    }
+
+  if (!nssym)
+    {
+      strncpy (saveError, dylderror (LT__STRERROR (SYMBOL_NOT_FOUND)), 255);
+      saveError[255] = 0;
+      if (!mh)
+	{
+	  mh = (mach_header *)lt__nsmodule_get_header (module);
+	}
+      nssym = lt__linkedlib_symbol (name, mh);
+    }
+
+  if (!nssym)
+    {
+      LT__SETERRORSTR (saveError);
+    }
+
+  return nssym ? NSAddressOfSymbol (nssym) : 0;
+}
+
+
+
+
+/* --- HELPER FUNCTIONS --- */
+
+
+/* Return the dyld error string, or the passed in error string if none. */
+static const char *
+dylderror (const char *errmsg)
+{
+  NSLinkEditErrors ler;
+  int lerno;
+  const char *file;
+  const char *errstr;
+
+  NSLinkEditError (&ler, &lerno, &file, &errstr);
+
+  if (! (errstr && *errstr))
+    {
+      errstr = errmsg;
+    }
+
+  return errstr;
+}
+
+/* There should probably be an apple dyld api for this. */
+static const mach_header *
+lt__nsmodule_get_header (NSModule module)
+{
+  int i = _dyld_image_count();
+  const char *modname = NSNameOfModule (module);
+  const mach_header *mh = 0;
+
+  if (!modname)
+    return NULL;
+
+  while (i > 0)
+    {
+      --i;
+      if (strneq (_dyld_get_image_name (i), modname))
+	{
+	  mh = _dyld_get_image_header (i);
+	  break;
+	}
+    }
+
+  return mh;
+}
+
+/* NSAddImage is also used to get the loaded image, but it only works if
+   the lib is installed, for uninstalled libs we need to check the
+   install_names against each other.  Note that this is still broken if
+   DYLD_IMAGE_SUFFIX is set and a different lib was loaded as a result.  */
+static const char *
+lt__header_get_instnam (const mach_header *mh)
+{
+  unsigned long offset = sizeof(mach_header);
+  const char* result   = 0;
+  int j;
+
+  for (j = 0; j < mh->ncmds; j++)
+    {
+      struct load_command *lc;
+
+      lc = (struct load_command*) (((unsigned long) mh) + offset);
+      if (LC_ID_DYLIB == lc->cmd)
+	{
+	  result=(char*)(((dylib_command*) lc)->dylib.name.offset +
+			 (unsigned long) lc);
+	}
+      offset += lc->cmdsize;
+    }
+
+  return result;
+}
+
+static const mach_header *
+lt__match_loadedlib (const char *name)
+{
+  const mach_header *mh	= 0;
+  int i = _dyld_image_count();
+
+  while (i > 0)
+    {
+      const char *id;
+
+      --i;
+      id = lt__header_get_instnam (_dyld_get_image_header (i));
+      if (id && strneq (id, name))
+	{
+	  mh = _dyld_get_image_header (i);
+	  break;
+	}
+    }
+
+  return mh;
+}
+
+/* Safe to assume our mh is good. */
+static NSSymbol
+lt__linkedlib_symbol (const char *symname, const mach_header *mh)
+{
+  NSSymbol symbol = 0;
+
+  if (lt__image_symbol && NSIsSymbolNameDefined (symname))
+    {
+      unsigned long offset = sizeof(mach_header);
+      struct load_command *lc;
+      int j;
+
+      for (j = 0; j < mh->ncmds; j++)
+	{
+	  lc = (struct load_command*) (((unsigned long) mh) + offset);
+	  if ((LC_LOAD_DYLIB == lc->cmd) || (LC_LOAD_WEAK_DYLIB == lc->cmd))
+	    {
+	      unsigned long base = ((dylib_command *) lc)->dylib.name.offset;
+	      char *name = (char *) (base + (unsigned long) lc);
+	      const mach_header *mh1 = lt__match_loadedlib (name);
+
+	      if (!mh1)
+		{
+		  /* Maybe NSAddImage can find it */
+		  mh1 = lt__addimage (name,
+				      NSADDIMAGE_OPTION_RETURN_ONLY_IF_LOADED
+				      | NSADDIMAGE_OPTION_WITH_SEARCHING
+				      | NSADDIMAGE_OPTION_RETURN_ON_ERROR);
+		}
+
+	      if (mh1)
+		{
+		  symbol = lt__image_symbol (mh1, symname, LT__SYMLOOKUP_OPTS);
+		  if (symbol)
+		    break;
+		}
+	    }
+
+	  offset += lc->cmdsize;
+	}
+    }
+
+  return symbol;
+}
diff --git a/libltdl/loaders/load_add_on.c b/libltdl/loaders/load_add_on.c
new file mode 100644
index 0000000..379f9ba
--- /dev/null
+++ b/libltdl/loaders/load_add_on.c
@@ -0,0 +1,167 @@
+/* loader-load_add_on.c --  dynamic linking for BeOS
+
+   Copyright (C) 1998, 1999, 2000, 2004, 2006,
+                 2007, 2008 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_dlloader.h"
+
+/* Use the preprocessor to rename non-static symbols to avoid namespace
+   collisions when the loader code is statically linked into libltdl.
+   Use the "<module_name>_LTX_" prefix so that the symbol addresses can
+   be fetched from the preloaded symbol list by lt_dlsym():  */
+#define get_vtable	load_add_on_LTX_get_vtable
+
+LT_BEGIN_C_DECLS
+LT_SCOPE lt_dlvtable *get_vtable (lt_user_data loader_data);
+LT_END_C_DECLS
+
+
+/* Boilerplate code to set up the vtable for hooking this loader into
+   libltdl's loader list:  */
+static int	 vl_exit  (lt_user_data loader_data);
+static lt_module vm_open  (lt_user_data loader_data, const char *filename,
+                           lt_dladvise advise);
+static int	 vm_close (lt_user_data loader_data, lt_module module);
+static void *	 vm_sym   (lt_user_data loader_data, lt_module module,
+			  const char *symbolname);
+
+static lt_dlvtable *vtable = 0;
+
+/* Return the vtable for this loader, only the name and sym_prefix
+   attributes (plus the virtual function implementations, obviously)
+   change between loaders.  */
+lt_dlvtable *
+get_vtable (lt_user_data loader_data)
+{
+  if (!vtable)
+    {
+      vtable = lt__zalloc (sizeof *vtable);
+    }
+
+  if (vtable && !vtable->name)
+    {
+      vtable->name		= "lt_load_add_on";
+      vtable->module_open	= vm_open;
+      vtable->module_close	= vm_close;
+      vtable->find_sym		= vm_sym;
+      vtable->dlloader_exit	= vl_exit;
+      vtable->dlloader_data	= loader_data;
+      vtable->priority		= LT_DLLOADER_APPEND;
+    }
+
+  if (vtable && (vtable->dlloader_data != loader_data))
+    {
+      LT__SETERROR (INIT_LOADER);
+      return 0;
+    }
+
+  return vtable;
+}
+
+
+
+/* --- IMPLEMENTATION --- */
+
+
+#include <kernel/image.h>
+
+/* A function called through the vtable when this loader is no
+   longer needed by the application.  */
+static int
+vl_exit (lt_user_data LT__UNUSED loader_data)
+{
+  vtable = NULL;
+  return 0;
+}
+
+/* A function called through the vtable to open a module with this
+   loader.  Returns an opaque representation of the newly opened
+   module for processing with this loader's other vtable functions.  */
+static lt_module
+vm_open (lt_user_data LT__UNUSED loader_data, const char *filename,
+         lt_dladvise LT__UNUSED advise)
+{
+  image_id image = 0;
+
+  if (filename)
+    {
+      image = load_add_on (filename);
+    }
+  else
+    {
+      image_info info;
+      int32 cookie = 0;
+      if (get_next_image_info (0, &cookie, &info) == B_OK)
+	image = load_add_on (info.name);
+    }
+
+  if (image <= 0)
+    {
+      LT__SETERROR (CANNOT_OPEN);
+      image = 0;
+    }
+
+  return (lt_module) image;
+}
+
+
+/* A function called through the vtable when a particular module
+   should be unloaded.  */
+static int
+vm_close (lt_user_data LT__UNUSED loader_data, lt_module module)
+{
+  int errors = 0;
+
+  if (unload_add_on ((image_id) module) != B_OK)
+    {
+      LT__SETERROR (CANNOT_CLOSE);
+      ++errors;
+    }
+
+  return errors;
+}
+
+
+/* A function called through the vtable to get the address of
+   a symbol loaded from a particular module.  */
+static void *
+vm_sym (lt_user_data LT__UNUSED loader_data, lt_module module, const char *name)
+{
+  void *address = 0;
+  image_id image = (image_id) module;
+
+  if (get_image_symbol (image, name, B_SYMBOL_TYPE_ANY, address) != B_OK)
+    {
+      LT__SETERROR (SYMBOL_NOT_FOUND);
+      address = 0;
+    }
+
+  return address;
+}
diff --git a/libltdl/loaders/loadlibrary.c b/libltdl/loaders/loadlibrary.c
new file mode 100644
index 0000000..179c009
--- /dev/null
+++ b/libltdl/loaders/loadlibrary.c
@@ -0,0 +1,369 @@
+/* loader-loadlibrary.c --  dynamic linking for Win32
+
+   Copyright (C) 1998, 1999, 2000, 2004, 2005, 2006,
+                 2007, 2008, 2010 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_dlloader.h"
+
+#if defined(__CYGWIN__)
+# include <sys/cygwin.h>
+#endif
+
+/* Use the preprocessor to rename non-static symbols to avoid namespace
+   collisions when the loader code is statically linked into libltdl.
+   Use the "<module_name>_LTX_" prefix so that the symbol addresses can
+   be fetched from the preloaded symbol list by lt_dlsym():  */
+#define get_vtable	loadlibrary_LTX_get_vtable
+
+LT_BEGIN_C_DECLS
+LT_SCOPE lt_dlvtable *get_vtable (lt_user_data loader_data);
+LT_END_C_DECLS
+
+
+/* Boilerplate code to set up the vtable for hooking this loader into
+   libltdl's loader list:  */
+static int	 vl_exit  (lt_user_data loader_data);
+static lt_module vm_open  (lt_user_data loader_data, const char *filename,
+                           lt_dladvise advise);
+static int	 vm_close (lt_user_data loader_data, lt_module module);
+static void *	 vm_sym   (lt_user_data loader_data, lt_module module,
+			  const char *symbolname);
+
+static lt_dlinterface_id iface_id = 0;
+static lt_dlvtable *vtable = 0;
+
+/* Return the vtable for this loader, only the name and sym_prefix
+   attributes (plus the virtual function implementations, obviously)
+   change between loaders.  */
+lt_dlvtable *
+get_vtable (lt_user_data loader_data)
+{
+  if (!vtable)
+    {
+      vtable = (lt_dlvtable *) lt__zalloc (sizeof *vtable);
+      iface_id = lt_dlinterface_register ("ltdl loadlibrary", NULL);
+    }
+
+  if (vtable && !vtable->name)
+    {
+      vtable->name		= "lt_loadlibrary";
+      vtable->module_open	= vm_open;
+      vtable->module_close	= vm_close;
+      vtable->find_sym		= vm_sym;
+      vtable->dlloader_exit	= vl_exit;
+      vtable->dlloader_data	= loader_data;
+      vtable->priority		= LT_DLLOADER_APPEND;
+    }
+
+  if (vtable && (vtable->dlloader_data != loader_data))
+    {
+      LT__SETERROR (INIT_LOADER);
+      return 0;
+    }
+
+  return vtable;
+}
+
+
+
+/* --- IMPLEMENTATION --- */
+
+
+#include <windows.h>
+
+#define LOCALFREE(mem)					     LT_STMT_START { \
+	if (mem) { LocalFree ((void *)mem); mem = NULL; }    } LT_STMT_END
+#define LOADLIB__SETERROR(errmsg) LT__SETERRORSTR (loadlibraryerror (errmsg))
+#define LOADLIB_SETERROR(errcode) LOADLIB__SETERROR (LT__STRERROR (errcode))
+
+static const char *loadlibraryerror (const char *default_errmsg);
+static DWORD WINAPI wrap_getthreaderrormode (void);
+static DWORD WINAPI fallback_getthreaderrormode (void);
+static BOOL WINAPI wrap_setthreaderrormode (DWORD mode, DWORD *oldmode);
+static BOOL WINAPI fallback_setthreaderrormode (DWORD mode, DWORD *oldmode);
+
+typedef DWORD (WINAPI getthreaderrormode_type) (void);
+typedef BOOL (WINAPI setthreaderrormode_type) (DWORD, DWORD *);
+
+static getthreaderrormode_type *getthreaderrormode = wrap_getthreaderrormode;
+static setthreaderrormode_type *setthreaderrormode = wrap_setthreaderrormode;
+static char *error_message = 0;
+
+
+/* A function called through the vtable when this loader is no
+   longer needed by the application.  */
+static int
+vl_exit (lt_user_data LT__UNUSED loader_data)
+{
+  vtable = NULL;
+  LOCALFREE (error_message);
+  return 0;
+}
+
+/* A function called through the vtable to open a module with this
+   loader.  Returns an opaque representation of the newly opened
+   module for processing with this loader's other vtable functions.  */
+static lt_module
+vm_open (lt_user_data LT__UNUSED loader_data, const char *filename,
+         lt_dladvise LT__UNUSED advise)
+{
+  lt_module	module	   = 0;
+  char		*ext;
+  char		wpath[MAX_PATH];
+  size_t	len;
+
+  if (!filename)
+    {
+      /* Get the name of main module */
+      *wpath = 0;
+      GetModuleFileName (NULL, wpath, sizeof (wpath));
+      filename = wpath;
+    }
+  else
+    {
+      len = LT_STRLEN (filename);
+
+      if (len >= MAX_PATH)
+        {
+	  LT__SETERROR (CANNOT_OPEN);
+	  return 0;
+	}
+
+#if HAVE_DECL_CYGWIN_CONV_PATH
+      if (cygwin_conv_path (CCP_POSIX_TO_WIN_A, filename, wpath, MAX_PATH))
+	{
+	  LT__SETERROR (CANNOT_OPEN);
+	  return 0;
+	}
+      len = 0;
+#elif defined(__CYGWIN__)
+      cygwin_conv_to_full_win32_path (filename, wpath);
+      len = 0;
+#else
+      strcpy(wpath, filename);
+#endif
+
+      ext = strrchr (wpath, '.');
+      if (!ext)
+	{
+	  /* Append a `.' to stop Windows from adding an
+	     implicit `.dll' extension. */
+	  if (!len)
+	    len = strlen (wpath);
+
+	  if (len + 1 >= MAX_PATH)
+	    {
+	      LT__SETERROR (CANNOT_OPEN);
+	      return 0;
+	    }
+
+	  wpath[len] = '.';
+	  wpath[len+1] = '\0';
+	}
+    }
+
+  {
+    /* Silence dialog from LoadLibrary on some failures. */
+    DWORD errormode = getthreaderrormode ();
+    DWORD last_error;
+
+    setthreaderrormode (errormode | SEM_FAILCRITICALERRORS, NULL);
+
+    module = LoadLibrary (wpath);
+
+    /* Restore the error mode. */
+    last_error = GetLastError ();
+    setthreaderrormode (errormode, NULL);
+    SetLastError (last_error);
+  }
+
+  /* libltdl expects this function to fail if it is unable
+     to physically load the library.  Sadly, LoadLibrary
+     will search the loaded libraries for a match and return
+     one of them if the path search load fails.
+
+     We check whether LoadLibrary is returning a handle to
+     an already loaded module, and simulate failure if we
+     find one. */
+  {
+    lt_dlhandle cur = 0;
+
+    while ((cur = lt_dlhandle_iterate (iface_id, cur)))
+      {
+        if (!cur->module)
+          {
+            cur = 0;
+            break;
+          }
+
+        if (cur->module == module)
+          {
+            break;
+          }
+      }
+
+    if (!module)
+      LOADLIB_SETERROR (CANNOT_OPEN);
+    else if (cur)
+      {
+        LT__SETERROR (CANNOT_OPEN);
+        module = 0;
+      }
+  }
+
+  return module;
+}
+
+
+/* A function called through the vtable when a particular module
+   should be unloaded.  */
+static int
+vm_close (lt_user_data LT__UNUSED loader_data, lt_module module)
+{
+  int errors = 0;
+
+  if (FreeLibrary ((HMODULE) module) == 0)
+    {
+      LOADLIB_SETERROR (CANNOT_CLOSE);
+      ++errors;
+    }
+
+  return errors;
+}
+
+
+/* A function called through the vtable to get the address of
+   a symbol loaded from a particular module.  */
+static void *
+vm_sym (lt_user_data LT__UNUSED loader_data, lt_module module, const char *name)
+{
+  void *address = (void *) GetProcAddress ((HMODULE) module, name);
+
+  if (!address)
+    {
+      LOADLIB_SETERROR (SYMBOL_NOT_FOUND);
+    }
+
+  return address;
+}
+
+
+
+/* --- HELPER FUNCTIONS --- */
+
+
+/* Return the windows error message, or the passed in error message on
+   failure. */
+static const char *
+loadlibraryerror (const char *default_errmsg)
+{
+  size_t len;
+  LOCALFREE (error_message);
+
+  FormatMessageA (FORMAT_MESSAGE_ALLOCATE_BUFFER |
+                  FORMAT_MESSAGE_FROM_SYSTEM |
+                  FORMAT_MESSAGE_IGNORE_INSERTS,
+                  NULL,
+                  GetLastError (),
+                  0,
+                  (char *) &error_message,
+                  0, NULL);
+
+  /* Remove trailing CRNL */
+  len = LT_STRLEN (error_message);
+  if (len && error_message[len - 1] == '\n')
+    error_message[--len] = LT_EOS_CHAR;
+  if (len && error_message[len - 1] == '\r')
+    error_message[--len] = LT_EOS_CHAR;
+
+  return len ? error_message : default_errmsg;
+}
+
+/* A function called through the getthreaderrormode variable which checks
+   if the system supports GetThreadErrorMode (or GetErrorMode) and arranges
+   for it or a fallback implementation to be called directly in the future.
+   The selected version is then called. */
+static DWORD WINAPI
+wrap_getthreaderrormode (void)
+{
+  HMODULE kernel32 = GetModuleHandleA ("kernel32.dll");
+  getthreaderrormode
+    = (getthreaderrormode_type *) GetProcAddress (kernel32,
+						  "GetThreadErrorMode");
+  if (!getthreaderrormode)
+    getthreaderrormode
+      = (getthreaderrormode_type *) GetProcAddress (kernel32,
+						    "GetErrorMode");
+  if (!getthreaderrormode)
+    getthreaderrormode = fallback_getthreaderrormode;
+  return getthreaderrormode ();
+}
+
+/* A function called through the getthreaderrormode variable for cases
+   where the system does not support GetThreadErrorMode or GetErrorMode */
+static DWORD WINAPI
+fallback_getthreaderrormode (void)
+{
+  /* Prior to Windows Vista, the only way to get the current error
+     mode was to set a new one. In our case, we are setting a new
+     error mode right after "getting" it while ignoring the error
+     mode in effect when setting the new error mode, so that's
+     fairly ok. */
+  return (DWORD) SetErrorMode (SEM_FAILCRITICALERRORS);
+}
+
+/* A function called through the setthreaderrormode variable which checks
+   if the system supports SetThreadErrorMode and arranges for it or a
+   fallback implementation to be called directly in the future.
+   The selected version is then called. */
+static BOOL WINAPI
+wrap_setthreaderrormode (DWORD mode, DWORD *oldmode)
+{
+  HMODULE kernel32 = GetModuleHandleA ("kernel32.dll");
+  setthreaderrormode
+    = (setthreaderrormode_type *) GetProcAddress (kernel32,
+						  "SetThreadErrorMode");
+  if (!setthreaderrormode)
+    setthreaderrormode = fallback_setthreaderrormode;
+  return setthreaderrormode (mode, oldmode);
+}
+
+/* A function called through the setthreaderrormode variable for cases
+   where the system does not support SetThreadErrorMode. */
+static BOOL WINAPI
+fallback_setthreaderrormode (DWORD mode, DWORD *oldmode)
+{
+  /* Prior to Windows 7, there was no way to set the thread local error
+     mode, so set the process global error mode instead. */
+  DWORD old = (DWORD) SetErrorMode (mode);
+  if (oldmode)
+    *oldmode = old;
+  return TRUE;
+}
diff --git a/libltdl/loaders/preopen.c b/libltdl/loaders/preopen.c
new file mode 100644
index 0000000..7149287
--- /dev/null
+++ b/libltdl/loaders/preopen.c
@@ -0,0 +1,375 @@
+/* loader-preopen.c -- emulate dynamic linking using preloaded_symbols
+
+   Copyright (C) 1998, 1999, 2000, 2004, 2006,
+                 2007, 2008 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_dlloader.h"
+
+/* Use the preprocessor to rename non-static symbols to avoid namespace
+   collisions when the loader code is statically linked into libltdl.
+   Use the "<module_name>_LTX_" prefix so that the symbol addresses can
+   be fetched from the preloaded symbol list by lt_dlsym():  */
+#define get_vtable	preopen_LTX_get_vtable
+
+LT_BEGIN_C_DECLS
+LT_SCOPE lt_dlvtable *get_vtable (lt_user_data loader_data);
+LT_END_C_DECLS
+
+
+/* Boilerplate code to set up the vtable for hooking this loader into
+   libltdl's loader list:  */
+static int	 vl_init  (lt_user_data loader_data);
+static int	 vl_exit  (lt_user_data loader_data);
+static lt_module vm_open  (lt_user_data loader_data, const char *filename,
+                           lt_dladvise advise);
+static int	 vm_close (lt_user_data loader_data, lt_module module);
+static void *	 vm_sym   (lt_user_data loader_data, lt_module module,
+			  const char *symbolname);
+
+static lt_dlvtable *vtable = 0;
+
+/* Return the vtable for this loader, only the name and sym_prefix
+   attributes (plus the virtual function implementations, obviously)
+   change between loaders.  */
+lt_dlvtable *
+get_vtable (lt_user_data loader_data)
+{
+  if (!vtable)
+    {
+      vtable = (lt_dlvtable *) lt__zalloc (sizeof *vtable);
+    }
+
+  if (vtable && !vtable->name)
+    {
+      vtable->name		= "lt_preopen";
+      vtable->sym_prefix	= 0;
+      vtable->module_open	= vm_open;
+      vtable->module_close	= vm_close;
+      vtable->find_sym		= vm_sym;
+      vtable->dlloader_init	= vl_init;
+      vtable->dlloader_exit	= vl_exit;
+      vtable->dlloader_data	= loader_data;
+      vtable->priority		= LT_DLLOADER_PREPEND;
+    }
+
+  if (vtable && (vtable->dlloader_data != loader_data))
+    {
+      LT__SETERROR (INIT_LOADER);
+      return 0;
+    }
+
+  return vtable;
+}
+
+
+
+/* --- IMPLEMENTATION --- */
+
+
+/* Wrapper type to chain together symbol lists of various origins.  */
+typedef struct symlist_chain
+{
+  struct symlist_chain *next;
+  const lt_dlsymlist   *symlist;
+} symlist_chain;
+
+
+static int add_symlist   (const lt_dlsymlist *symlist);
+static int free_symlists (void);
+
+/* The start of the symbol lists chain.  */
+static symlist_chain	       *preloaded_symlists		= 0;
+
+/* A symbol list preloaded before lt_init() was called.  */
+static const	lt_dlsymlist   *default_preloaded_symbols	= 0;
+
+
+/* A function called through the vtable to initialise this loader.  */
+static int
+vl_init (lt_user_data LT__UNUSED loader_data)
+{
+  int errors = 0;
+
+  preloaded_symlists = 0;
+  if (default_preloaded_symbols)
+    {
+      errors = lt_dlpreload (default_preloaded_symbols);
+    }
+
+  return errors;
+}
+
+
+/* A function called through the vtable when this loader is no
+   longer needed by the application.  */
+static int
+vl_exit (lt_user_data LT__UNUSED loader_data)
+{
+  vtable = NULL;
+  free_symlists ();
+  return 0;
+}
+
+
+/* A function called through the vtable to open a module with this
+   loader.  Returns an opaque representation of the newly opened
+   module for processing with this loader's other vtable functions.  */
+static lt_module
+vm_open (lt_user_data LT__UNUSED loader_data, const char *filename,
+         lt_dladvise LT__UNUSED advise)
+{
+  symlist_chain *lists;
+  lt_module	 module = 0;
+
+  if (!preloaded_symlists)
+    {
+      LT__SETERROR (NO_SYMBOLS);
+      goto done;
+    }
+
+  /* Can't use NULL as the reflective symbol header, as NULL is
+     used to mark the end of the entire symbol list.  Self-dlpreopened
+     symbols follow this magic number, chosen to be an unlikely
+     clash with a real module name.  */
+  if (!filename)
+    {
+      filename = "@PROGRAM@";
+    }
+
+  for (lists = preloaded_symlists; lists; lists = lists->next)
+    {
+      const lt_dlsymlist *symbol;
+      for (symbol= lists->symlist; symbol->name; ++symbol)
+	{
+	  if (!symbol->address && streq (symbol->name, filename))
+	    {
+	      /* If the next symbol's name and address is 0, it means
+		 the module just contains the originator and no symbols.
+		 In this case we pretend that we never saw the module and
+	         hope that some other loader will be able to load the module
+	         and have access to its symbols */
+	      const lt_dlsymlist *next_symbol = symbol +1;
+	      if (next_symbol->address && next_symbol->name)
+		{
+	          module = (lt_module) lists->symlist;
+	          goto done;
+		}
+	    }
+	}
+    }
+
+  LT__SETERROR (FILE_NOT_FOUND);
+
+ done:
+  return module;
+}
+
+
+/* A function called through the vtable when a particular module
+   should be unloaded.  */
+static int
+vm_close (lt_user_data LT__UNUSED loader_data, lt_module LT__UNUSED module)
+{
+  /* Just to silence gcc -Wall */
+  module = 0;
+  return 0;
+}
+
+
+/* A function called through the vtable to get the address of
+   a symbol loaded from a particular module.  */
+static void *
+vm_sym (lt_user_data LT__UNUSED loader_data, lt_module module, const char *name)
+{
+  lt_dlsymlist	       *symbol = (lt_dlsymlist*) module;
+
+  symbol +=2;			/* Skip header (originator then libname). */
+
+  while (symbol->name)
+    {
+      if (streq (symbol->name, name))
+	{
+	  return symbol->address;
+	}
+
+    ++symbol;
+  }
+
+  LT__SETERROR (SYMBOL_NOT_FOUND);
+
+  return 0;
+}
+
+
+
+/* --- HELPER FUNCTIONS --- */
+
+
+/* The symbol lists themselves are not allocated from the heap, but
+   we can unhook them and free up the chain of links between them.  */
+static int
+free_symlists (void)
+{
+  symlist_chain *lists;
+
+  lists = preloaded_symlists;
+  while (lists)
+    {
+      symlist_chain *next = lists->next;
+      FREE (lists);
+      lists = next;
+    }
+  preloaded_symlists = 0;
+
+  return 0;
+}
+
+/* Add a new symbol list to the global chain.  */
+static int
+add_symlist (const lt_dlsymlist *symlist)
+{
+  symlist_chain *lists;
+  int		 errors   = 0;
+
+  /* Search for duplicate entries:  */
+  for (lists = preloaded_symlists;
+       lists && lists->symlist != symlist; lists = lists->next)
+    /*NOWORK*/;
+
+  /* Don't add the same list twice:  */
+  if (!lists)
+    {
+      symlist_chain *tmp = (symlist_chain *) lt__zalloc (sizeof *tmp);
+
+      if (tmp)
+	{
+	  tmp->symlist = symlist;
+	  tmp->next = preloaded_symlists;
+	  preloaded_symlists = tmp;
+	}
+      else
+	{
+	  ++errors;
+	}
+    }
+
+  return errors;
+}
+
+
+
+/* --- PRELOADING API CALL IMPLEMENTATIONS --- */
+
+
+/* Save a default symbol list for later.  */
+int
+lt_dlpreload_default (const lt_dlsymlist *preloaded)
+{
+  default_preloaded_symbols = preloaded;
+  return 0;
+}
+
+
+/* Add a symbol list to the global chain, or with a NULL argument,
+   revert to just the default list.  */
+int
+lt_dlpreload (const lt_dlsymlist *preloaded)
+{
+  int errors = 0;
+
+  if (preloaded)
+    {
+      errors = add_symlist (preloaded);
+    }
+  else
+    {
+      free_symlists();
+
+      if (default_preloaded_symbols)
+	{
+	  errors = lt_dlpreload (default_preloaded_symbols);
+	}
+    }
+
+  return errors;
+}
+
+
+/* Open all the preloaded modules from the named originator, executing
+   a callback for each one.  If ORIGINATOR is NULL, then call FUNC for
+   each preloaded module from the program itself.  */
+int
+lt_dlpreload_open (const char *originator, lt_dlpreload_callback_func *func)
+{
+  symlist_chain *list;
+  int		 errors = 0;
+  int		 found  = 0;
+
+  /* For each symlist in the chain...  */
+  for (list = preloaded_symlists; list; list = list->next)
+    {
+      /* ...that was preloaded by the requesting ORIGINATOR... */
+      if ((originator && streq (list->symlist->name, originator))
+          || (!originator && streq (list->symlist->name, "@PROGRAM@")))
+	{
+	  const lt_dlsymlist *symbol;
+	  unsigned int idx = 0;
+
+	  ++found;
+
+	  /* ...load the symbols per source compilation unit:
+	     (we preincrement the index to skip over the originator entry)  */
+	  while ((symbol = &list->symlist[++idx])->name != 0)
+	    {
+	      if ((symbol->address == 0)
+		  && (strneq (symbol->name, "@PROGRAM@")))
+		{
+		  lt_dlhandle handle = lt_dlopen (symbol->name);
+		  if (handle == 0)
+		    {
+		      ++errors;
+		    }
+		  else
+		    {
+		      errors += (*func) (handle);
+		    }
+		}
+	    }
+	}
+    }
+
+  if (!found)
+    {
+      LT__SETERROR(CANNOT_OPEN);
+      ++errors;
+    }
+
+  return errors;
+}
diff --git a/libltdl/loaders/shl_load.c b/libltdl/loaders/shl_load.c
new file mode 100644
index 0000000..5a09d87
--- /dev/null
+++ b/libltdl/loaders/shl_load.c
@@ -0,0 +1,222 @@
+/* loader-shl_load.c --  dynamic linking with shl_load (HP-UX)
+
+   Copyright (C) 1998, 1999, 2000, 2004, 2006,
+                 2007, 2008 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_dlloader.h"
+
+/* Use the preprocessor to rename non-static symbols to avoid namespace
+   collisions when the loader code is statically linked into libltdl.
+   Use the "<module_name>_LTX_" prefix so that the symbol addresses can
+   be fetched from the preloaded symbol list by lt_dlsym():  */
+#define get_vtable	shl_load_LTX_get_vtable
+
+LT_BEGIN_C_DECLS
+LT_SCOPE lt_dlvtable *get_vtable (lt_user_data loader_data);
+LT_END_C_DECLS
+
+
+/* Boilerplate code to set up the vtable for hooking this loader into
+   libltdl's loader list:  */
+static int	 vl_exit  (lt_user_data loader_data);
+static lt_module vm_open  (lt_user_data loader_data, const char *filename,
+                           lt_dladvise advise);
+static int	 vm_close (lt_user_data loader_data, lt_module module);
+static void *	 vm_sym   (lt_user_data loader_data, lt_module module,
+			  const char *symbolname);
+
+static lt_dlvtable *vtable = 0;
+
+/* Return the vtable for this loader, only the name and sym_prefix
+   attributes (plus the virtual function implementations, obviously)
+   change between loaders.  */
+lt_dlvtable *
+get_vtable (lt_user_data loader_data)
+{
+  if (!vtable)
+    {
+      vtable = lt__zalloc (sizeof *vtable);
+    }
+
+  if (vtable && !vtable->name)
+    {
+      vtable->name		= "lt_shl_load";
+      vtable->module_open	= vm_open;
+      vtable->module_close	= vm_close;
+      vtable->find_sym		= vm_sym;
+      vtable->dlloader_exit	= vl_exit;
+      vtable->dlloader_data	= loader_data;
+      vtable->priority		= LT_DLLOADER_APPEND;
+    }
+
+  if (vtable && (vtable->dlloader_data != loader_data))
+    {
+      LT__SETERROR (INIT_LOADER);
+      return 0;
+    }
+
+  return vtable;
+}
+
+
+
+/* --- IMPLEMENTATION --- */
+
+
+#if defined(HAVE_DL_H)
+#  include <dl.h>
+#endif
+
+/* some flags are missing on some systems, so we provide
+ * harmless defaults.
+ *
+ * Mandatory:
+ * BIND_IMMEDIATE  - Resolve symbol references when the library is loaded.
+ * BIND_DEFERRED   - Delay code symbol resolution until actual reference.
+ *
+ * Optionally:
+ * BIND_FIRST	   - Place the library at the head of the symbol search
+ * 		     order.
+ * BIND_NONFATAL   - The default BIND_IMMEDIATE behavior is to treat all
+ * 		     unsatisfied symbols as fatal.  This flag allows
+ * 		     binding of unsatisfied code symbols to be deferred
+ * 		     until use.
+ *		     [Perl: For certain libraries, like DCE, deferred
+ *		     binding often causes run time problems. Adding
+ *		     BIND_NONFATAL to BIND_IMMEDIATE still allows
+ *		     unresolved references in situations like this.]
+ * BIND_NOSTART	   - Do not call the initializer for the shared library
+ *		     when the library is loaded, nor on a future call to
+ *		     shl_unload().
+ * BIND_VERBOSE	   - Print verbose messages concerning possible
+ *		     unsatisfied symbols.
+ *
+ * hp9000s700/hp9000s800:
+ * BIND_RESTRICTED - Restrict symbols visible by the library to those
+ *		     present at library load time.
+ * DYNAMIC_PATH	   - Allow the loader to dynamically search for the
+ *		     library specified by the path argument.
+ */
+
+#if !defined(DYNAMIC_PATH)
+#  define DYNAMIC_PATH		0
+#endif
+#if !defined(BIND_RESTRICTED)
+#  define BIND_RESTRICTED	0
+#endif
+
+#define	LT_BIND_FLAGS	(BIND_IMMEDIATE | BIND_NONFATAL | DYNAMIC_PATH)
+
+
+/* A function called through the vtable when this loader is no
+   longer needed by the application.  */
+static int
+vl_exit (lt_user_data LT__UNUSED loader_data)
+{
+  vtable = NULL;
+  return 0;
+}
+
+/* A function called through the vtable to open a module with this
+   loader.  Returns an opaque representation of the newly opened
+   module for processing with this loader's other vtable functions.  */
+static lt_module
+vm_open (lt_user_data LT__UNUSED loader_data, const char *filename,
+         lt_dladvise LT__UNUSED advise)
+{
+  static shl_t self = (shl_t) 0;
+  lt_module module = shl_load (filename, LT_BIND_FLAGS, 0L);
+
+  /* Since searching for a symbol against a NULL module handle will also
+     look in everything else that was already loaded and exported with
+     the -E compiler flag, we always cache a handle saved before any
+     modules are loaded.  */
+  if (!self)
+    {
+      void *address;
+      shl_findsym (&self, "main", TYPE_UNDEFINED, &address);
+    }
+
+  if (!filename)
+    {
+      module = self;
+    }
+  else
+    {
+      module = shl_load (filename, LT_BIND_FLAGS, 0L);
+
+      if (!module)
+	{
+	  LT__SETERROR (CANNOT_OPEN);
+	}
+    }
+
+  return module;
+}
+
+/* A function called through the vtable when a particular module
+   should be unloaded.  */
+static int
+vm_close (lt_user_data LT__UNUSED loader_data, lt_module module)
+{
+  int errors = 0;
+
+  if (module && (shl_unload ((shl_t) (module)) != 0))
+    {
+      LT__SETERROR (CANNOT_CLOSE);
+      ++errors;
+    }
+
+  return errors;
+}
+
+
+/* A function called through the vtable to get the address of
+   a symbol loaded from a particular module.  */
+static void *
+vm_sym (lt_user_data LT__UNUSED loader_data, lt_module module, const char *name)
+{
+  void *address = 0;
+
+  /* sys_shl_open should never return a NULL module handle */
+  if (module == (lt_module) 0)
+  {
+    LT__SETERROR (INVALID_HANDLE);
+  }
+  else if (!shl_findsym((shl_t*) &module, name, TYPE_UNDEFINED, &address))
+    {
+      if (!address)
+	{
+	  LT__SETERROR (SYMBOL_NOT_FOUND);
+	}
+    }
+
+  return address;
+}
diff --git a/libltdl/lt__alloc.c b/libltdl/lt__alloc.c
new file mode 100644
index 0000000..d39e17e
--- /dev/null
+++ b/libltdl/lt__alloc.c
@@ -0,0 +1,95 @@
+/* lt__alloc.c -- internal memory management interface
+
+   Copyright (C) 2004, 2006, 2007 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+
+#include <stdio.h>
+
+#include "lt__alloc.h"
+
+static void alloc_die_default (void);
+
+void (*lt__alloc_die) (void) = alloc_die_default;
+
+/* Unless overridden, exit on memory failure.  */
+static void
+alloc_die_default (void)
+{
+  fprintf (stderr, "Out of memory.\n");
+  exit (EXIT_FAILURE);
+}
+
+void *
+lt__malloc (size_t n)
+{
+  void *mem;
+
+  if (! (mem = malloc (n)))
+    (*lt__alloc_die) ();
+
+  return mem;
+}
+
+void *
+lt__zalloc (size_t n)
+{
+  void *mem;
+
+  if ((mem = lt__malloc (n)))
+    memset (mem, 0, n);
+
+  return mem;
+}
+
+void *
+lt__realloc (void *mem, size_t n)
+{
+  if (! (mem = realloc (mem, n)))
+    (*lt__alloc_die) ();
+
+  return mem;
+}
+
+void *
+lt__memdup (void const *mem, size_t n)
+{
+  void *newmem;
+
+  if ((newmem = lt__malloc (n)))
+    return memcpy (newmem, mem, n);
+
+  return 0;
+}
+
+char *
+lt__strdup (const char *string)
+{
+  return (char *) lt__memdup (string, strlen (string) +1);
+}
diff --git a/libltdl/lt__dirent.c b/libltdl/lt__dirent.c
new file mode 100644
index 0000000..30dc072
--- /dev/null
+++ b/libltdl/lt__dirent.c
@@ -0,0 +1,107 @@
+/* lt__dirent.c -- internal directory entry scanning interface
+
+   Copyright (C) 2001, 2004 Free Software Foundation, Inc.
+   Written by Bob Friesenhahn, 2001
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+
+#include <assert.h>
+#include <stddef.h>
+
+#include "lt__dirent.h"
+
+#if defined(__WINDOWS__)
+
+void
+closedir (DIR *entry)
+{
+  assert (entry != (DIR *) NULL);
+  FindClose (entry->hSearch);
+  free ((void *) entry);
+}
+
+
+DIR *
+opendir (const char *path)
+{
+  char file_spec[LT_FILENAME_MAX];
+  DIR *entry;
+
+  assert (path != (char *) 0);
+  if (lt_strlcpy (file_spec, path, sizeof file_spec) >= sizeof file_spec
+      || lt_strlcat (file_spec, "\\", sizeof file_spec) >= sizeof file_spec)
+    return (DIR *) 0;
+  entry = (DIR *) malloc (sizeof(DIR));
+  if (entry != (DIR *) 0)
+    {
+      entry->firsttime = TRUE;
+      entry->hSearch = FindFirstFile (file_spec, &entry->Win32FindData);
+
+      if (entry->hSearch == INVALID_HANDLE_VALUE)
+	{
+	  if (lt_strlcat (file_spec, "\\*.*", sizeof file_spec) < sizeof file_spec)
+	    {
+	      entry->hSearch = FindFirstFile (file_spec, &entry->Win32FindData);
+	    }
+
+	  if (entry->hSearch == INVALID_HANDLE_VALUE)
+	    {
+	      entry = (free (entry), (DIR *) 0);
+	    }
+	}
+    }
+
+  return entry;
+}
+
+
+struct dirent *
+readdir (DIR *entry)
+{
+  int status;
+
+  if (entry == (DIR *) 0)
+    return (struct dirent *) 0;
+
+  if (!entry->firsttime)
+    {
+      status = FindNextFile (entry->hSearch, &entry->Win32FindData);
+      if (status == 0)
+        return (struct dirent *) 0;
+    }
+
+  entry->firsttime = FALSE;
+  if (lt_strlcpy (entry->file_info.d_name, entry->Win32FindData.cFileName,
+	sizeof entry->file_info.d_name) >= sizeof entry->file_info.d_name)
+    return (struct dirent *) 0;
+  entry->file_info.d_namlen = strlen (entry->file_info.d_name);
+
+  return &entry->file_info;
+}
+
+#endif /*defined(__WINDOWS__)*/
diff --git a/libltdl/lt__strl.c b/libltdl/lt__strl.c
new file mode 100644
index 0000000..c2cee58
--- /dev/null
+++ b/libltdl/lt__strl.c
@@ -0,0 +1,127 @@
+/* lt__strl.c -- size-bounded string copying and concatenation
+
+   Copyright (C) 2004 Free Software Foundation, Inc.
+   Written by Bob Friesenhahn, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include <assert.h>
+#include <string.h>
+
+#include "lt__strl.h"
+
+/*
+ lt_strlcat appends the NULL-terminated string src to the end of dst.
+ It will append at most dstsize - strlen(dst) - 1 bytes,
+ NULL-terminating the result. The total length of the string which
+ would have been created given sufficient buffer size (may be longer
+ than dstsize) is returned.  This function substitutes for strlcat()
+ which is available under NetBSD, FreeBSD and Solaris 9.
+
+ Buffer overflow can be checked as follows:
+
+   if (lt_strlcat(dst, src, dstsize) >= dstsize)
+     return -1;
+*/
+#if !defined(HAVE_STRLCAT)
+size_t
+lt_strlcat(char *dst, const char *src, const size_t dstsize)
+{
+  size_t length;
+  char *p;
+  const char *q;
+
+  assert(dst != NULL);
+  assert(src != (const char *) NULL);
+  assert(dstsize >= 1);
+
+  length=strlen(dst);
+
+  /*
+    Copy remaining characters from src while constraining length to
+    size - 1.
+  */
+  for ( p = dst + length, q = src;
+        (*q != 0) && (length < dstsize - 1) ;
+        length++, p++, q++ )
+    *p = *q;
+
+  dst[length]='\0';
+
+  /*
+    Add remaining length of src to length.
+  */
+  while (*q++)
+    length++;
+
+  return length;
+}
+#endif /* !defined(HAVE_STRLCAT) */
+
+/*
+  lt_strlcpy copies up to dstsize - 1 characters from the NULL-terminated
+  string src to dst, NULL-terminating the result. The total length of
+  the string which would have been created given sufficient buffer
+  size (may be longer than dstsize) is returned. This function
+  substitutes for strlcpy() which is available under OpenBSD, FreeBSD
+  and Solaris 9.
+
+  Buffer overflow can be checked as  follows:
+
+    if (lt_strlcpy(dst, src, dstsize) >= dstsize)
+      return -1;
+*/
+#if !defined(HAVE_STRLCPY)
+size_t
+lt_strlcpy(char *dst, const char *src, const size_t dstsize)
+{
+  size_t length=0;
+  char *p;
+  const char *q;
+
+  assert(dst != NULL);
+  assert(src != (const char *) NULL);
+  assert(dstsize >= 1);
+
+  /*
+    Copy src to dst within bounds of size-1.
+  */
+  for ( p=dst, q=src, length=0 ;
+        (*q != 0) && (length < dstsize-1) ;
+        length++, p++, q++ )
+    *p = *q;
+
+  dst[length]='\0';
+
+  /*
+    Add remaining length of src to length.
+  */
+  while (*q++)
+    length++;
+
+  return length;
+}
+#endif /* !defined(HAVE_STRLCPY) */
diff --git a/libltdl/lt_dlloader.c b/libltdl/lt_dlloader.c
new file mode 100644
index 0000000..2c99a22
--- /dev/null
+++ b/libltdl/lt_dlloader.c
@@ -0,0 +1,210 @@
+/* lt_dlloader.c -- dynamic library loader interface
+
+   Copyright (C) 2004, 2007, 2008 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2004
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_dlloader.h"
+
+#define RETURN_SUCCESS 0
+#define RETURN_FAILURE 1
+
+static void *	loader_callback (SList *item, void *userdata);
+
+/* A list of all the dlloaders we know about, each stored as a boxed
+   SList item:  */
+static	SList    *loaders		= 0;
+
+
+/* Return NULL, unless the loader in this ITEM has a matching name,
+   in which case we return the matching item so that its address is
+   passed back out (for possible freeing) by slist_remove.  */
+static void *
+loader_callback (SList *item, void *userdata)
+{
+  const lt_dlvtable *vtable = (const lt_dlvtable *) item->userdata;
+  const char *	    name    = (const char *) userdata;
+
+  assert (vtable);
+
+  return streq (vtable->name, name) ? (void *) item : NULL;
+}
+
+
+/* Hook VTABLE into our global LOADERS list according to its own
+   PRIORITY field value.  */
+int
+lt_dlloader_add (const lt_dlvtable *vtable)
+{
+  SList *item;
+
+  if ((vtable == 0)	/* diagnose invalid vtable fields */
+      || (vtable->module_open == 0)
+      || (vtable->module_close == 0)
+      || (vtable->find_sym == 0)
+      || ((vtable->priority != LT_DLLOADER_PREPEND) &&
+	  (vtable->priority != LT_DLLOADER_APPEND)))
+    {
+      LT__SETERROR (INVALID_LOADER);
+      return RETURN_FAILURE;
+    }
+
+  item = slist_box (vtable);
+  if (!item)
+    {
+      (*lt__alloc_die) ();
+
+      /* Let the caller know something went wrong if lt__alloc_die
+	 doesn't abort.  */
+      return RETURN_FAILURE;
+    }
+
+  if (vtable->priority == LT_DLLOADER_PREPEND)
+    {
+      loaders = slist_cons (item, loaders);
+    }
+  else
+    {
+      assert (vtable->priority == LT_DLLOADER_APPEND);
+      loaders = slist_concat (loaders, item);
+    }
+
+  return RETURN_SUCCESS;
+}
+
+#ifdef LT_DEBUG_LOADERS
+static void *
+loader_dump_callback (SList *item, void *userdata)
+{
+  const lt_dlvtable *vtable = (const lt_dlvtable *) item->userdata;
+  fprintf (stderr, ", %s", (vtable && vtable->name) ? vtable->name : "(null)");
+  return 0;
+}
+
+void
+lt_dlloader_dump (void)
+{
+  fprintf (stderr, "loaders: ");
+  if (!loaders)
+    {
+      fprintf (stderr, "(empty)");
+    }
+  else
+    {
+      const lt_dlvtable *head = (const lt_dlvtable *) loaders->userdata;
+      fprintf (stderr, "%s", (head && head->name) ? head->name : "(null)");
+      if (slist_tail (loaders))
+	slist_foreach (slist_tail (loaders), loader_dump_callback, NULL);
+    }
+  fprintf (stderr, "\n");
+}
+#endif
+
+/* An iterator for the global loader list: if LOADER is NULL, then
+   return the first element, otherwise the following element.  */
+lt_dlloader
+lt_dlloader_next (lt_dlloader loader)
+{
+  SList *item = (SList *) loader;
+  return (lt_dlloader) (item ? item->next : loaders);
+}
+
+
+/* Non-destructive unboxing of a loader.  */
+const lt_dlvtable *
+lt_dlloader_get	(lt_dlloader loader)
+{
+  return (const lt_dlvtable *) (loader ? ((SList *) loader)->userdata : NULL);
+}
+
+
+/* Return the contents of the first item in the global loader list
+   with a matching NAME after removing it from that list.  If there
+   was no match, return NULL; if there is an error, return NULL and
+   set an error for lt_dlerror; do not set an error if only resident
+   modules need this loader; in either case, the loader list is not
+   changed if NULL is returned.  */
+lt_dlvtable *
+lt_dlloader_remove (const char *name)
+{
+  const lt_dlvtable *	vtable	= lt_dlloader_find (name);
+  static const char	id_string[] = "lt_dlloader_remove";
+  lt_dlinterface_id	iface;
+  lt_dlhandle		handle = 0;
+  int			in_use = 0;
+  int			in_use_by_resident = 0;
+
+  if (!vtable)
+    {
+      LT__SETERROR (INVALID_LOADER);
+      return 0;
+    }
+
+  /* Fail if there are any open modules which use this loader.  */
+  iface = lt_dlinterface_register (id_string, NULL);
+  while ((handle = lt_dlhandle_iterate (iface, handle)))
+    {
+      lt_dlhandle cur = handle;
+      if (cur->vtable == vtable)
+	{
+	  in_use = 1;
+	  if (lt_dlisresident (handle))
+	    in_use_by_resident = 1;
+	}
+    }
+  lt_dlinterface_free (iface);
+  if (in_use)
+    {
+      if (!in_use_by_resident)
+	LT__SETERROR (REMOVE_LOADER);
+      return 0;
+    }
+
+  /* Call the loader finalisation function.  */
+  if (vtable && vtable->dlloader_exit)
+    {
+      if ((*vtable->dlloader_exit) (vtable->dlloader_data) != 0)
+	{
+	  /* If there is an exit function, and it returns non-zero
+	     then it must set an error, and we will not remove it
+	     from the list.  */
+	  return 0;
+	}
+    }
+
+  /* If we got this far, remove the loader from our global list.  */
+  return (lt_dlvtable *)
+      slist_unbox ((SList *) slist_remove (&loaders, loader_callback, (void *) name));
+}
+
+
+const lt_dlvtable *
+lt_dlloader_find (const char *name)
+{
+  return lt_dlloader_get (slist_find (loaders, loader_callback, (void *) name));
+}
diff --git a/libltdl/lt_error.c b/libltdl/lt_error.c
new file mode 100644
index 0000000..d7af36d
--- /dev/null
+++ b/libltdl/lt_error.c
@@ -0,0 +1,110 @@
+/* lt_error.c -- error propogation interface
+
+   Copyright (C) 1999, 2000, 2001, 2004, 2005, 2007 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1999
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_error.h"
+
+static const char	*last_error	= 0;
+static const char	error_strings[LT_ERROR_MAX][LT_ERROR_LEN_MAX + 1] =
+  {
+#define LT_ERROR(name, diagnostic)	diagnostic,
+    lt_dlerror_table
+#undef LT_ERROR
+  };
+
+static	const char    **user_error_strings	= 0;
+static	int		errorcount		= LT_ERROR_MAX;
+
+int
+lt_dladderror (const char *diagnostic)
+{
+  int		errindex = 0;
+  int		result	 = -1;
+  const char  **temp     = (const char **) 0;
+
+  assert (diagnostic);
+
+  errindex = errorcount - LT_ERROR_MAX;
+  temp = REALLOC (const char *, user_error_strings, 1 + errindex);
+  if (temp)
+    {
+      user_error_strings		= temp;
+      user_error_strings[errindex]	= diagnostic;
+      result				= errorcount++;
+    }
+
+  return result;
+}
+
+int
+lt_dlseterror (int errindex)
+{
+  int		errors	 = 0;
+
+  if (errindex >= errorcount || errindex < 0)
+    {
+      /* Ack!  Error setting the error message! */
+      LT__SETERROR (INVALID_ERRORCODE);
+      ++errors;
+    }
+  else if (errindex < LT_ERROR_MAX)
+    {
+      /* No error setting the error message! */
+      LT__SETERRORSTR (error_strings[errindex]);
+    }
+  else
+    {
+      /* No error setting the error message! */
+      LT__SETERRORSTR (user_error_strings[errindex - LT_ERROR_MAX]);
+    }
+
+  return errors;
+}
+
+const char *
+lt__error_string (int errorcode)
+{
+  assert (errorcode >= 0);
+  assert (errorcode < LT_ERROR_MAX);
+
+  return error_strings[errorcode];
+}
+
+const char *
+lt__get_last_error (void)
+{
+  return last_error;
+}
+
+const char *
+lt__set_last_error (const char *errormsg)
+{
+  return last_error = errormsg;
+}
diff --git a/libltdl/ltdl.c b/libltdl/ltdl.c
new file mode 100644
index 0000000..01853e0
--- /dev/null
+++ b/libltdl/ltdl.c
@@ -0,0 +1,2464 @@
+/* ltdl.c -- system independent dlopen wrapper
+
+   Copyright (C) 1998, 1999, 2000, 2004, 2005, 2006,
+		 2007, 2008, 2011 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "lt__private.h"
+#include "lt_system.h"
+#include "lt_dlloader.h"
+
+
+/* --- MANIFEST CONSTANTS --- */
+
+
+/* Standard libltdl search path environment variable name  */
+#undef  LTDL_SEARCHPATH_VAR
+#define LTDL_SEARCHPATH_VAR	"LTDL_LIBRARY_PATH"
+
+/* Standard libtool archive file extension.  */
+#undef  LT_ARCHIVE_EXT
+#define LT_ARCHIVE_EXT	".la"
+
+/* max. filename length */
+#if !defined(LT_FILENAME_MAX)
+#  define LT_FILENAME_MAX	1024
+#endif
+
+#if !defined(LT_LIBEXT)
+#  define LT_LIBEXT "a"
+#endif
+
+#if !defined(LT_LIBPREFIX)
+#  define LT_LIBPREFIX "lib"
+#endif
+
+/* This is the maximum symbol size that won't require malloc/free */
+#undef	LT_SYMBOL_LENGTH
+#define LT_SYMBOL_LENGTH	128
+
+/* This accounts for the _LTX_ separator */
+#undef	LT_SYMBOL_OVERHEAD
+#define LT_SYMBOL_OVERHEAD	5
+
+/* Various boolean flags can be stored in the flags field of an
+   lt_dlhandle... */
+#define LT_DLIS_RESIDENT(handle)  ((handle)->info.is_resident)
+#define LT_DLIS_SYMGLOBAL(handle) ((handle)->info.is_symglobal)
+#define LT_DLIS_SYMLOCAL(handle)  ((handle)->info.is_symlocal)
+
+
+static	const char	objdir[]		= LT_OBJDIR;
+static	const char	archive_ext[]		= LT_ARCHIVE_EXT;
+static  const char	libext[]		= LT_LIBEXT;
+static  const char	libprefix[]		= LT_LIBPREFIX;
+#if defined(LT_MODULE_EXT)
+static	const char	shlib_ext[]		= LT_MODULE_EXT;
+#endif
+/* If the loadable module suffix is not the same as the linkable
+ * shared library suffix, this will be defined. */
+#if defined(LT_SHARED_EXT)
+static	const char	shared_ext[]		= LT_SHARED_EXT;
+#endif
+#if defined(LT_DLSEARCH_PATH)
+static	const char	sys_dlsearch_path[]	= LT_DLSEARCH_PATH;
+#endif
+
+
+
+
+/* --- DYNAMIC MODULE LOADING --- */
+
+
+/* The type of a function used at each iteration of  foreach_dirinpath().  */
+typedef int	foreach_callback_func (char *filename, void *data1,
+				       void *data2);
+/* foreachfile_callback itself calls a function of this type: */
+typedef int	file_worker_func      (const char *filename, void *data);
+
+
+static	int	foreach_dirinpath     (const char *search_path,
+				       const char *base_name,
+				       foreach_callback_func *func,
+				       void *data1, void *data2);
+static	int	find_file_callback    (char *filename, void *data1,
+				       void *data2);
+static	int	find_handle_callback  (char *filename, void *data,
+				       void *ignored);
+static	int	foreachfile_callback  (char *filename, void *data1,
+				       void *data2);
+
+
+static	int     canonicalize_path     (const char *path, char **pcanonical);
+static	int	argzize_path	      (const char *path,
+				       char **pargz, size_t *pargz_len);
+static	FILE   *find_file	      (const char *search_path,
+				       const char *base_name, char **pdir);
+static	lt_dlhandle *find_handle      (const char *search_path,
+				       const char *base_name,
+				       lt_dlhandle *handle,
+				       lt_dladvise advise);
+static	int	find_module	      (lt_dlhandle *handle, const char *dir,
+				       const char *libdir, const char *dlname,
+				       const char *old_name, int installed,
+				       lt_dladvise advise);
+static  int     has_library_ext       (const char *filename);
+static	int	load_deplibs	      (lt_dlhandle handle,  char *deplibs);
+static	int	trim		      (char **dest, const char *str);
+static	int	try_dlopen	      (lt_dlhandle *handle,
+				       const char *filename, const char *ext,
+				       lt_dladvise advise);
+static	int	tryall_dlopen	      (lt_dlhandle *handle,
+				       const char *filename,
+				       lt_dladvise padvise,
+				       const lt_dlvtable *vtable);
+static	int	unload_deplibs	      (lt_dlhandle handle);
+static	int	lt_argz_insert	      (char **pargz, size_t *pargz_len,
+				       char *before, const char *entry);
+static	int	lt_argz_insertinorder (char **pargz, size_t *pargz_len,
+				       const char *entry);
+static	int	lt_argz_insertdir     (char **pargz, size_t *pargz_len,
+				       const char *dirnam, struct dirent *dp);
+static	int	lt_dlpath_insertdir   (char **ppath, char *before,
+				       const char *dir);
+static	int	list_files_by_dir     (const char *dirnam,
+				       char **pargz, size_t *pargz_len);
+static	int	file_not_found	      (void);
+
+#ifdef HAVE_LIBDLLOADER
+static	int	loader_init_callback  (lt_dlhandle handle);
+#endif /* HAVE_LIBDLLOADER */
+
+static	int	loader_init	      (lt_get_vtable *vtable_func,
+				       lt_user_data data);
+
+static	char	       *user_search_path= 0;
+static	lt_dlhandle	handles	= 0;
+static	int		initialized	= 0;
+
+/* Our memory failure callback sets the error message to be passed back
+   up to the client, so we must be careful to return from mallocation
+   callers if allocation fails (as this callback returns!!).  */
+void
+lt__alloc_die_callback (void)
+{
+  LT__SETERROR (NO_MEMORY);
+}
+
+#ifdef HAVE_LIBDLLOADER
+/* This function is called to initialise each preloaded module loader,
+   and hook it into the list of loaders to be used when attempting to
+   dlopen an application module.  */
+static int
+loader_init_callback (lt_dlhandle handle)
+{
+  lt_get_vtable *vtable_func = (lt_get_vtable *) lt_dlsym (handle, "get_vtable");
+  return loader_init (vtable_func, 0);
+}
+#endif /* HAVE_LIBDLLOADER */
+
+static int
+loader_init (lt_get_vtable *vtable_func, lt_user_data data)
+{
+  const lt_dlvtable *vtable = 0;
+  int errors = 0;
+
+  if (vtable_func)
+    {
+      vtable = (*vtable_func) (data);
+    }
+
+  /* lt_dlloader_add will LT__SETERROR if it fails.  */
+  errors += lt_dlloader_add (vtable);
+
+  assert (errors || vtable);
+
+  if ((!errors) && vtable->dlloader_init)
+    {
+      if ((*vtable->dlloader_init) (vtable->dlloader_data))
+	{
+	  LT__SETERROR (INIT_LOADER);
+	  ++errors;
+	}
+    }
+
+  return errors;
+}
+
+/* Bootstrap the loader loading with the preopening loader.  */
+#define get_vtable		preopen_LTX_get_vtable
+#define preloaded_symbols	LT_CONC3(lt_, LTDLOPEN, _LTX_preloaded_symbols)
+
+LT_BEGIN_C_DECLS
+LT_SCOPE const lt_dlvtable *	get_vtable (lt_user_data data);
+LT_END_C_DECLS
+#ifdef HAVE_LIBDLLOADER
+extern LT_DLSYM_CONST lt_dlsymlist preloaded_symbols[];
+#endif
+
+/* Initialize libltdl. */
+int
+lt_dlinit (void)
+{
+  int	errors	= 0;
+
+  /* Initialize only at first call. */
+  if (++initialized == 1)
+    {
+      lt__alloc_die	= lt__alloc_die_callback;
+      handles		= 0;
+      user_search_path	= 0; /* empty search path */
+
+      /* First set up the statically loaded preload module loader, so
+	 we can use it to preopen the other loaders we linked in at
+	 compile time.  */
+      errors += loader_init (get_vtable, 0);
+
+      /* Now open all the preloaded module loaders, so the application
+	 can use _them_ to lt_dlopen its own modules.  */
+#ifdef HAVE_LIBDLLOADER
+      if (!errors)
+	{
+	  errors += lt_dlpreload (preloaded_symbols);
+	}
+
+      if (!errors)
+	{
+	  errors += lt_dlpreload_open (LT_STR(LTDLOPEN), loader_init_callback);
+	}
+#endif /* HAVE_LIBDLLOADER */
+    }
+
+#ifdef LT_DEBUG_LOADERS
+  lt_dlloader_dump();
+#endif
+
+  return errors;
+}
+
+int
+lt_dlexit (void)
+{
+  /* shut down libltdl */
+  lt_dlloader *loader   = 0;
+  lt_dlhandle  handle   = handles;
+  int	       errors   = 0;
+
+  if (!initialized)
+    {
+      LT__SETERROR (SHUTDOWN);
+      ++errors;
+      goto done;
+    }
+
+  /* shut down only at last call. */
+  if (--initialized == 0)
+    {
+      int	level;
+
+      while (handles && LT_DLIS_RESIDENT (handles))
+	{
+	  handles = handles->next;
+	}
+
+      /* close all modules */
+      for (level = 1; handle; ++level)
+	{
+	  lt_dlhandle cur = handles;
+	  int saw_nonresident = 0;
+
+	  while (cur)
+	    {
+	      lt_dlhandle tmp = cur;
+	      cur = cur->next;
+	      if (!LT_DLIS_RESIDENT (tmp))
+		{
+		  saw_nonresident = 1;
+		  if (tmp->info.ref_count <= level)
+		    {
+		      if (lt_dlclose (tmp))
+			{
+			  ++errors;
+			}
+		      /* Make sure that the handle pointed to by 'cur' still exists.
+			 lt_dlclose recursively closes dependent libraries which removes
+			 them from the linked list.  One of these might be the one
+			 pointed to by 'cur'.  */
+		      if (cur)
+			{
+			  for (tmp = handles; tmp; tmp = tmp->next)
+			    if (tmp == cur)
+			      break;
+			  if (! tmp)
+			    cur = handles;
+			}
+		    }
+		}
+	    }
+	  /* done if only resident modules are left */
+	  if (!saw_nonresident)
+	    break;
+	}
+
+      /* When removing loaders, we can only find out failure by testing
+	 the error string, so avoid a spurious one from an earlier
+	 failed command. */
+      if (!errors)
+	LT__SETERRORSTR (0);
+
+      /* close all loaders */
+      for (loader = (lt_dlloader *) lt_dlloader_next (NULL); loader;)
+	{
+	  lt_dlloader *next   = (lt_dlloader *) lt_dlloader_next (loader);
+	  lt_dlvtable *vtable = (lt_dlvtable *) lt_dlloader_get (loader);
+
+	  if ((vtable = lt_dlloader_remove ((char *) vtable->name)))
+	    {
+	      FREE (vtable);
+	    }
+	  else
+	    {
+	      /* ignore errors due to resident modules */
+	      const char *err;
+	      LT__GETERROR (err);
+	      if (err)
+		++errors;
+	    }
+
+	  loader = next;
+	}
+
+      FREE(user_search_path);
+    }
+
+ done:
+  return errors;
+}
+
+
+/* Try VTABLE or, if VTABLE is NULL, all available loaders for FILENAME.
+   If the library is not successfully loaded, return non-zero.  Otherwise,
+   the dlhandle is stored at the address given in PHANDLE.  */
+static int
+tryall_dlopen (lt_dlhandle *phandle, const char *filename,
+	       lt_dladvise advise, const lt_dlvtable *vtable)
+{
+  lt_dlhandle	handle		= handles;
+  const char *	saved_error	= 0;
+  int		errors		= 0;
+
+#ifdef LT_DEBUG_LOADERS
+  fprintf (stderr, "tryall_dlopen (%s, %s)\n",
+	   filename ? filename : "(null)",
+	   vtable ? vtable->name : "(ALL)");
+#endif
+
+  LT__GETERROR (saved_error);
+
+  /* check whether the module was already opened */
+  for (;handle; handle = handle->next)
+    {
+      if ((handle->info.filename == filename) /* dlopen self: 0 == 0 */
+	  || (handle->info.filename && filename
+	      && streq (handle->info.filename, filename)))
+	{
+	  break;
+	}
+    }
+
+  if (handle)
+    {
+      ++handle->info.ref_count;
+      *phandle = handle;
+      goto done;
+    }
+
+  handle = *phandle;
+  if (filename)
+    {
+      /* Comment out the check of file permissions using access.
+	 This call seems to always return -1 with error EACCES.
+      */
+      /* We need to catch missing file errors early so that
+	 file_not_found() can detect what happened.
+      if (access (filename, R_OK) != 0)
+	{
+	  LT__SETERROR (FILE_NOT_FOUND);
+	  ++errors;
+	  goto done;
+	} */
+
+      handle->info.filename = lt__strdup (filename);
+      if (!handle->info.filename)
+	{
+	  ++errors;
+	  goto done;
+	}
+    }
+  else
+    {
+      handle->info.filename = 0;
+    }
+
+  {
+    lt_dlloader loader = lt_dlloader_next (0);
+    const lt_dlvtable *loader_vtable;
+
+    do
+      {
+	if (vtable)
+	  loader_vtable = vtable;
+	else
+	  loader_vtable = lt_dlloader_get (loader);
+
+#ifdef LT_DEBUG_LOADERS
+	fprintf (stderr, "Calling %s->module_open (%s)\n",
+		 (loader_vtable && loader_vtable->name) ? loader_vtable->name : "(null)",
+		 filename ? filename : "(null)");
+#endif
+	handle->module = (*loader_vtable->module_open) (loader_vtable->dlloader_data,
+							filename, advise);
+#ifdef LT_DEBUG_LOADERS
+	fprintf (stderr, "  Result: %s\n",
+		 handle->module ? "Success" : "Failed");
+#endif
+
+	if (handle->module != 0)
+	  {
+	    if (advise)
+	      {
+		handle->info.is_resident  = advise->is_resident;
+		handle->info.is_symglobal = advise->is_symglobal;
+		handle->info.is_symlocal  = advise->is_symlocal;
+	      }
+	    break;
+	  }
+      }
+    while (!vtable && (loader = lt_dlloader_next (loader)));
+
+    /* If VTABLE was given but couldn't open the module, or VTABLE wasn't
+       given but we exhausted all loaders without opening the module, bail
+       out!  */
+    if ((vtable && !handle->module)
+	|| (!vtable && !loader))
+      {
+	FREE (handle->info.filename);
+	++errors;
+	goto done;
+      }
+
+    handle->vtable = loader_vtable;
+  }
+
+  LT__SETERRORSTR (saved_error);
+
+ done:
+  return errors;
+}
+
+
+static int
+tryall_dlopen_module (lt_dlhandle *handle, const char *prefix,
+		      const char *dirname, const char *dlname,
+		      lt_dladvise advise)
+{
+  int      error	= 0;
+  char     *filename	= 0;
+  size_t   filename_len	= 0;
+  size_t   dirname_len	= LT_STRLEN (dirname);
+
+  assert (handle);
+  assert (dirname);
+  assert (dlname);
+#if defined(LT_DIRSEP_CHAR)
+  /* Only canonicalized names (i.e. with DIRSEP chars already converted)
+     should make it into this function:  */
+  assert (strchr (dirname, LT_DIRSEP_CHAR) == 0);
+#endif
+
+  if (dirname_len > 0)
+    if (dirname[dirname_len -1] == '/')
+      --dirname_len;
+  filename_len = dirname_len + 1 + LT_STRLEN (dlname);
+
+  /* Allocate memory, and combine DIRNAME and MODULENAME into it.
+     The PREFIX (if any) is handled below.  */
+  filename  = MALLOC (char, filename_len + 1);
+  if (!filename)
+    return 1;
+
+  sprintf (filename, "%.*s/%s", (int) dirname_len, dirname, dlname);
+
+  /* Now that we have combined DIRNAME and MODULENAME, if there is
+     also a PREFIX to contend with, simply recurse with the arguments
+     shuffled.  Otherwise, attempt to open FILENAME as a module.  */
+  if (prefix)
+    {
+      error += tryall_dlopen_module (handle, (const char *) 0,
+				     prefix, filename, advise);
+    }
+  else if (tryall_dlopen (handle, filename, advise, 0) != 0)
+    {
+      ++error;
+    }
+
+  FREE (filename);
+  return error;
+}
+
+static int
+find_module (lt_dlhandle *handle, const char *dir, const char *libdir,
+	     const char *dlname,  const char *old_name, int installed,
+	     lt_dladvise advise)
+{
+  /* Try to open the old library first; if it was dlpreopened,
+     we want the preopened version of it, even if a dlopenable
+     module is available.  */
+  if (old_name && tryall_dlopen (handle, old_name,
+			  advise, lt_dlloader_find ("lt_preopen") ) == 0)
+    {
+      return 0;
+    }
+
+  /* Try to open the dynamic library.  */
+  if (dlname)
+    {
+      /* try to open the installed module */
+      if (installed && libdir)
+	{
+	  if (tryall_dlopen_module (handle, (const char *) 0,
+				    libdir, dlname, advise) == 0)
+	    return 0;
+	}
+
+      /* try to open the not-installed module */
+      if (!installed)
+	{
+	  if (tryall_dlopen_module (handle, dir, objdir,
+				    dlname, advise) == 0)
+	    return 0;
+	}
+
+      /* maybe it was moved to another directory */
+      {
+	  if (dir && (tryall_dlopen_module (handle, (const char *) 0,
+					    dir, dlname, advise) == 0))
+	    return 0;
+      }
+    }
+
+  return 1;
+}
+
+
+static int
+canonicalize_path (const char *path, char **pcanonical)
+{
+  char *canonical = 0;
+
+  assert (path && *path);
+  assert (pcanonical);
+
+  canonical = MALLOC (char, 1+ LT_STRLEN (path));
+  if (!canonical)
+    return 1;
+
+  {
+    size_t dest = 0;
+    size_t src;
+    for (src = 0; path[src] != LT_EOS_CHAR; ++src)
+      {
+	/* Path separators are not copied to the beginning or end of
+	   the destination, or if another separator would follow
+	   immediately.  */
+	if (path[src] == LT_PATHSEP_CHAR)
+	  {
+	    if ((dest == 0)
+		|| (path[1+ src] == LT_PATHSEP_CHAR)
+		|| (path[1+ src] == LT_EOS_CHAR))
+	      continue;
+	  }
+
+	/* Anything other than a directory separator is copied verbatim.  */
+	if ((path[src] != '/')
+#if defined(LT_DIRSEP_CHAR)
+	    && (path[src] != LT_DIRSEP_CHAR)
+#endif
+	    )
+	  {
+	    canonical[dest++] = path[src];
+	  }
+	/* Directory separators are converted and copied only if they are
+	   not at the end of a path -- i.e. before a path separator or
+	   NULL terminator.  */
+	else if ((path[1+ src] != LT_PATHSEP_CHAR)
+		 && (path[1+ src] != LT_EOS_CHAR)
+#if defined(LT_DIRSEP_CHAR)
+		 && (path[1+ src] != LT_DIRSEP_CHAR)
+#endif
+		 && (path[1+ src] != '/'))
+	  {
+	    canonical[dest++] = '/';
+	  }
+      }
+
+    /* Add an end-of-string marker at the end.  */
+    canonical[dest] = LT_EOS_CHAR;
+  }
+
+  /* Assign new value.  */
+  *pcanonical = canonical;
+
+  return 0;
+}
+
+static int
+argzize_path (const char *path, char **pargz, size_t *pargz_len)
+{
+  error_t error;
+
+  assert (path);
+  assert (pargz);
+  assert (pargz_len);
+
+  if ((error = argz_create_sep (path, LT_PATHSEP_CHAR, pargz, pargz_len)))
+    {
+      switch (error)
+	{
+	case ENOMEM:
+	  LT__SETERROR (NO_MEMORY);
+	  break;
+	default:
+	  LT__SETERROR (UNKNOWN);
+	  break;
+	}
+
+      return 1;
+    }
+
+  return 0;
+}
+
+/* Repeatedly call FUNC with each LT_PATHSEP_CHAR delimited element
+   of SEARCH_PATH and references to DATA1 and DATA2, until FUNC returns
+   non-zero or all elements are exhausted.  If BASE_NAME is non-NULL,
+   it is appended to each SEARCH_PATH element before FUNC is called.  */
+static int
+foreach_dirinpath (const char *search_path, const char *base_name,
+		   foreach_callback_func *func, void *data1, void *data2)
+{
+  int	 result		= 0;
+  size_t filenamesize	= 0;
+  size_t lenbase	= LT_STRLEN (base_name);
+  size_t argz_len	= 0;
+  char *argz		= 0;
+  char *filename	= 0;
+  char *canonical	= 0;
+
+  if (!search_path || !*search_path)
+    {
+      LT__SETERROR (FILE_NOT_FOUND);
+      goto cleanup;
+    }
+
+  if (canonicalize_path (search_path, &canonical) != 0)
+    goto cleanup;
+
+  if (argzize_path (canonical, &argz, &argz_len) != 0)
+    goto cleanup;
+
+  {
+    char *dir_name = 0;
+    while ((dir_name = argz_next (argz, argz_len, dir_name)))
+      {
+	size_t lendir = LT_STRLEN (dir_name);
+
+	if (1+ lendir + lenbase >= filenamesize)
+	{
+	  FREE (filename);
+	  filenamesize	= 1+ lendir + 1+ lenbase; /* "/d" + '/' + "f" + '\0' */
+	  filename	= MALLOC (char, filenamesize);
+	  if (!filename)
+	    goto cleanup;
+	}
+
+	assert (filenamesize > lendir);
+	strcpy (filename, dir_name);
+
+	if (base_name && *base_name)
+	  {
+	    if (filename[lendir -1] != '/')
+	      filename[lendir++] = '/';
+	    strcpy (filename +lendir, base_name);
+	  }
+
+	if ((result = (*func) (filename, data1, data2)))
+	  {
+	    break;
+	  }
+      }
+  }
+
+ cleanup:
+  FREE (argz);
+  FREE (canonical);
+  FREE (filename);
+
+  return result;
+}
+
+/* If FILEPATH can be opened, store the name of the directory component
+   in DATA1, and the opened FILE* structure address in DATA2.  Otherwise
+   DATA1 is unchanged, but DATA2 is set to a pointer to NULL.  */
+static int
+find_file_callback (char *filename, void *data1, void *data2)
+{
+  char	     **pdir	= (char **) data1;
+  FILE	     **pfile	= (FILE **) data2;
+  int	     is_done	= 0;
+
+  assert (filename && *filename);
+  assert (pdir);
+  assert (pfile);
+
+  if ((*pfile = fopen (filename, LT_READTEXT_MODE)))
+    {
+      char *dirend = strrchr (filename, '/');
+
+      if (dirend > filename)
+	*dirend   = LT_EOS_CHAR;
+
+      FREE (*pdir);
+      *pdir   = lt__strdup (filename);
+      is_done = (*pdir == 0) ? -1 : 1;
+    }
+
+  return is_done;
+}
+
+static FILE *
+find_file (const char *search_path, const char *base_name, char **pdir)
+{
+  FILE *file = 0;
+
+  foreach_dirinpath (search_path, base_name, find_file_callback, pdir, &file);
+
+  return file;
+}
+
+static int
+find_handle_callback (char *filename, void *data, void *data2)
+{
+  lt_dlhandle  *phandle		= (lt_dlhandle *) data;
+  int		notfound	= access (filename, R_OK);
+  lt_dladvise   advise		= (lt_dladvise) data2;
+
+  /* Bail out if file cannot be read...  */
+  if (notfound)
+    return 0;
+
+  /* Try to dlopen the file, but do not continue searching in any
+     case.  */
+  if (tryall_dlopen (phandle, filename, advise, 0) != 0)
+    *phandle = 0;
+
+  return 1;
+}
+
+/* If HANDLE was found return it, otherwise return 0.  If HANDLE was
+   found but could not be opened, *HANDLE will be set to 0.  */
+static lt_dlhandle *
+find_handle (const char *search_path, const char *base_name,
+	     lt_dlhandle *phandle, lt_dladvise advise)
+{
+  if (!search_path)
+    return 0;
+
+  if (!foreach_dirinpath (search_path, base_name, find_handle_callback,
+			  phandle, advise))
+    return 0;
+
+  return phandle;
+}
+
+#if !defined(LTDL_DLOPEN_DEPLIBS)
+static int
+load_deplibs (lt_dlhandle handle, char * LT__UNUSED deplibs)
+{
+  handle->depcount = 0;
+  return 0;
+}
+
+#else /* defined(LTDL_DLOPEN_DEPLIBS) */
+static int
+load_deplibs (lt_dlhandle handle, char *deplibs)
+{
+  char	*p, *save_search_path = 0;
+  int   depcount = 0;
+  int	i;
+  char	**names = 0;
+  int	errors = 0;
+
+  handle->depcount = 0;
+
+  if (!deplibs)
+    {
+      return errors;
+    }
+  ++errors;
+
+  if (user_search_path)
+    {
+      save_search_path = lt__strdup (user_search_path);
+      if (!save_search_path)
+	goto cleanup;
+    }
+
+  /* extract search paths and count deplibs */
+  p = deplibs;
+  while (*p)
+    {
+      if (!isspace ((unsigned char) *p))
+	{
+	  char *end = p+1;
+	  while (*end && !isspace((unsigned char) *end))
+	    {
+	      ++end;
+	    }
+
+	  if (strncmp(p, "-L", 2) == 0 || strncmp(p, "-R", 2) == 0)
+	    {
+	      char save = *end;
+	      *end = 0; /* set a temporary string terminator */
+	      if (lt_dladdsearchdir(p+2))
+		{
+		  goto cleanup;
+		}
+	      *end = save;
+	    }
+	  else
+	    {
+	      ++depcount;
+	    }
+
+	  p = end;
+	}
+      else
+	{
+	  ++p;
+	}
+    }
+
+
+  if (!depcount)
+    {
+      errors = 0;
+      goto cleanup;
+    }
+
+  names = MALLOC (char *, depcount);
+  if (!names)
+    goto cleanup;
+
+  /* now only extract the actual deplibs */
+  depcount = 0;
+  p = deplibs;
+  while (*p)
+    {
+      if (isspace ((unsigned char) *p))
+	{
+	  ++p;
+	}
+      else
+	{
+	  char *end = p+1;
+	  while (*end && !isspace ((unsigned char) *end))
+	    {
+	      ++end;
+	    }
+
+	  if (strncmp(p, "-L", 2) != 0 && strncmp(p, "-R", 2) != 0)
+	    {
+	      char *name;
+	      char save = *end;
+	      *end = 0; /* set a temporary string terminator */
+	      if (strncmp(p, "-l", 2) == 0)
+		{
+		  size_t name_len = 3+ /* "lib" */ LT_STRLEN (p + 2);
+		  name = MALLOC (char, 1+ name_len);
+		  if (name)
+		    sprintf (name, "lib%s", p+2);
+		}
+	      else
+		name = lt__strdup(p);
+
+	      if (!name)
+		goto cleanup_names;
+
+	      names[depcount++] = name;
+	      *end = save;
+	    }
+	  p = end;
+	}
+    }
+
+  /* load the deplibs (in reverse order)
+     At this stage, don't worry if the deplibs do not load correctly,
+     they may already be statically linked into the loading application
+     for instance.  There will be a more enlightening error message
+     later on if the loaded module cannot resolve all of its symbols.  */
+  if (depcount)
+    {
+      lt_dlhandle cur = handle;
+      int	j = 0;
+
+      cur->deplibs = MALLOC (lt_dlhandle, depcount);
+      if (!cur->deplibs)
+	goto cleanup_names;
+
+      for (i = 0; i < depcount; ++i)
+	{
+	  cur->deplibs[j] = lt_dlopenext(names[depcount-1-i]);
+	  if (cur->deplibs[j])
+	    {
+	      ++j;
+	    }
+	}
+
+      cur->depcount	= j;	/* Number of successfully loaded deplibs */
+      errors		= 0;
+    }
+
+ cleanup_names:
+  for (i = 0; i < depcount; ++i)
+    {
+      FREE (names[i]);
+    }
+
+ cleanup:
+  FREE (names);
+  /* restore the old search path */
+  if (save_search_path) {
+    MEMREASSIGN (user_search_path, save_search_path);
+  }
+
+  return errors;
+}
+#endif /* defined(LTDL_DLOPEN_DEPLIBS) */
+
+static int
+unload_deplibs (lt_dlhandle handle)
+{
+  int i;
+  int errors = 0;
+  lt_dlhandle cur = handle;
+
+  if (cur->depcount)
+    {
+      for (i = 0; i < cur->depcount; ++i)
+	{
+	  if (!LT_DLIS_RESIDENT (cur->deplibs[i]))
+	    {
+	      errors += lt_dlclose (cur->deplibs[i]);
+	    }
+	}
+      FREE (cur->deplibs);
+    }
+
+  return errors;
+}
+
+static int
+trim (char **dest, const char *str)
+{
+  /* remove the leading and trailing "'" from str
+     and store the result in dest */
+  const char *end   = strrchr (str, '\'');
+  size_t len	    = LT_STRLEN (str);
+  char *tmp;
+
+  FREE (*dest);
+
+  if (!end || end == str)
+    return 1;
+
+  if (len > 3 && str[0] == '\'')
+    {
+      tmp = MALLOC (char, end - str);
+      if (!tmp)
+	return 1;
+
+      memcpy(tmp, &str[1], (end - str) - 1);
+      tmp[(end - str) - 1] = LT_EOS_CHAR;
+      *dest = tmp;
+    }
+  else
+    {
+      *dest = 0;
+    }
+
+  return 0;
+}
+
+/* Read the .la file FILE. */
+static int
+parse_dotla_file(FILE *file, char **dlname, char **libdir, char **deplibs,
+    char **old_name, int *installed)
+{
+  int		errors = 0;
+  size_t	line_len = LT_FILENAME_MAX;
+  char *	line = MALLOC (char, line_len);
+
+  if (!line)
+    {
+      LT__SETERROR (FILE_NOT_FOUND);
+      return 1;
+    }
+
+  while (!feof (file))
+    {
+      line[line_len-2] = '\0';
+      if (!fgets (line, (int) line_len, file))
+	{
+	  break;
+	}
+
+      /* Handle the case where we occasionally need to read a line
+	 that is longer than the initial buffer size.
+	 Behave even if the file contains NUL bytes due to corruption. */
+      while (line[line_len-2] != '\0' && line[line_len-2] != '\n' && !feof (file))
+	{
+	  line = REALLOC (char, line, line_len *2);
+	  if (!line)
+	    {
+	      ++errors;
+	      goto cleanup;
+	    }
+	  line[line_len * 2 - 2] = '\0';
+	  if (!fgets (&line[line_len -1], (int) line_len +1, file))
+	    {
+	      break;
+	    }
+	  line_len *= 2;
+	}
+
+      if (line[0] == '\n' || line[0] == '#')
+	{
+	  continue;
+	}
+
+#undef  STR_DLNAME
+#define STR_DLNAME	"dlname="
+      if (strncmp (line, STR_DLNAME, sizeof (STR_DLNAME) - 1) == 0)
+	{
+	  errors += trim (dlname, &line[sizeof (STR_DLNAME) - 1]);
+	}
+
+#undef  STR_OLD_LIBRARY
+#define STR_OLD_LIBRARY	"old_library="
+      else if (strncmp (line, STR_OLD_LIBRARY,
+	    sizeof (STR_OLD_LIBRARY) - 1) == 0)
+	{
+	  errors += trim (old_name, &line[sizeof (STR_OLD_LIBRARY) - 1]);
+	}
+
+      /* Windows native tools do not understand the POSIX paths we store
+	 in libdir. */
+#undef  STR_LIBDIR
+#define STR_LIBDIR	"libdir="
+      else if (strncmp (line, STR_LIBDIR, sizeof (STR_LIBDIR) - 1) == 0)
+	{
+	  errors += trim (libdir, &line[sizeof(STR_LIBDIR) - 1]);
+#ifdef __WINDOWS__
+	  /* Disallow following unix-style paths on MinGW.  */
+	  if (*libdir && (**libdir == '/' || **libdir == '\\'))
+	    **libdir = '\0';
+#endif
+	}
+
+#undef  STR_DL_DEPLIBS
+#define STR_DL_DEPLIBS	"dependency_libs="
+      else if (strncmp (line, STR_DL_DEPLIBS,
+	    sizeof (STR_DL_DEPLIBS) - 1) == 0)
+	{
+	  errors += trim (deplibs, &line[sizeof (STR_DL_DEPLIBS) - 1]);
+	}
+      else if (streq (line, "installed=yes\n"))
+	{
+	  *installed = 1;
+	}
+      else if (streq (line, "installed=no\n"))
+	{
+	  *installed = 0;
+	}
+
+#undef  STR_LIBRARY_NAMES
+#define STR_LIBRARY_NAMES "library_names="
+      else if (!*dlname && strncmp (line, STR_LIBRARY_NAMES,
+	    sizeof (STR_LIBRARY_NAMES) - 1) == 0)
+	{
+	  char *last_libname;
+	  errors += trim (dlname, &line[sizeof (STR_LIBRARY_NAMES) - 1]);
+	  if (!errors
+	      && *dlname
+	      && (last_libname = strrchr (*dlname, ' ')) != 0)
+	    {
+	      last_libname = lt__strdup (last_libname + 1);
+	      if (!last_libname)
+		{
+		  ++errors;
+		  goto cleanup;
+		}
+	      MEMREASSIGN (*dlname, last_libname);
+	    }
+	}
+
+      if (errors)
+	break;
+    }
+cleanup:
+  FREE (line);
+  return errors;
+}
+
+
+/* Try to open FILENAME as a module. */
+static int
+try_dlopen (lt_dlhandle *phandle, const char *filename, const char *ext,
+	    lt_dladvise advise)
+{
+  const char *	saved_error	= 0;
+  char *	archive_name	= 0;
+  char *	canonical	= 0;
+  char *	base_name	= 0;
+  char *	dir		= 0;
+  char *	name		= 0;
+  char *        attempt		= 0;
+  int		errors		= 0;
+  lt_dlhandle	newhandle;
+
+  assert (phandle);
+  assert (*phandle == 0);
+
+#ifdef LT_DEBUG_LOADERS
+  fprintf (stderr, "try_dlopen (%s, %s)\n",
+	   filename ? filename : "(null)",
+	   ext ? ext : "(null)");
+#endif
+
+  LT__GETERROR (saved_error);
+
+  /* dlopen self? */
+  if (!filename)
+    {
+      *phandle = (lt_dlhandle) lt__zalloc (sizeof (struct lt__handle));
+      if (*phandle == 0)
+	return 1;
+
+      newhandle	= *phandle;
+
+      /* lt_dlclose()ing yourself is very bad!  Disallow it.  */
+      newhandle->info.is_resident = 1;
+
+      if (tryall_dlopen (&newhandle, 0, advise, 0) != 0)
+	{
+	  FREE (*phandle);
+	  return 1;
+	}
+
+      goto register_handle;
+    }
+
+  assert (filename && *filename);
+
+  if (ext)
+    {
+      attempt = MALLOC (char, LT_STRLEN (filename) + LT_STRLEN (ext) + 1);
+      if (!attempt)
+	return 1;
+
+      sprintf(attempt, "%s%s", filename, ext);
+    }
+  else
+    {
+      attempt = lt__strdup (filename);
+      if (!attempt)
+	return 1;
+    }
+
+  /* Doing this immediately allows internal functions to safely
+     assume only canonicalized paths are passed.  */
+  if (canonicalize_path (attempt, &canonical) != 0)
+    {
+      ++errors;
+      goto cleanup;
+    }
+
+  /* If the canonical module name is a path (relative or absolute)
+     then split it into a directory part and a name part.  */
+  base_name = strrchr (canonical, '/');
+  if (base_name)
+    {
+      size_t dirlen = (1+ base_name) - canonical;
+
+      dir = MALLOC (char, 1+ dirlen);
+      if (!dir)
+	{
+	  ++errors;
+	  goto cleanup;
+	}
+
+      strncpy (dir, canonical, dirlen);
+      dir[dirlen] = LT_EOS_CHAR;
+
+      ++base_name;
+    }
+  else
+    MEMREASSIGN (base_name, canonical);
+
+  assert (base_name && *base_name);
+
+  ext = strrchr (base_name, '.');
+  if (!ext)
+    {
+      ext = base_name + LT_STRLEN (base_name);
+    }
+
+  /* extract the module name from the file name */
+  name = MALLOC (char, ext - base_name + 1);
+  if (!name)
+    {
+      ++errors;
+      goto cleanup;
+    }
+
+  /* canonicalize the module name */
+  {
+    int i;
+    for (i = 0; i < ext - base_name; ++i)
+      {
+	if (isalnum ((unsigned char)(base_name[i])))
+	  {
+	    name[i] = base_name[i];
+	  }
+	else
+	  {
+	    name[i] = '_';
+	  }
+      }
+    name[ext - base_name] = LT_EOS_CHAR;
+  }
+
+  /* Before trawling through the filesystem in search of a module,
+     check whether we are opening a preloaded module.  */
+  if (!dir)
+    {
+      const lt_dlvtable *vtable	= lt_dlloader_find ("lt_preopen");
+
+      if (vtable)
+	{
+	  /* libprefix + name + "." + libext + NULL */
+	  archive_name = MALLOC (char, strlen (libprefix) + LT_STRLEN (name) + strlen (libext) + 2);
+	  *phandle = (lt_dlhandle) lt__zalloc (sizeof (struct lt__handle));
+
+	  if ((*phandle == NULL) || (archive_name == NULL))
+	    {
+	      ++errors;
+	      goto cleanup;
+	    }
+	  newhandle = *phandle;
+
+	  /* Preloaded modules are always named according to their old
+	     archive name.  */
+	  if (strncmp(name, "lib", 3) == 0)
+	    {
+	      sprintf (archive_name, "%s%s.%s", libprefix, name + 3, libext);
+	    }
+	  else
+	    {
+	      sprintf (archive_name, "%s.%s", name, libext);
+	    }
+
+	  if (tryall_dlopen (&newhandle, archive_name, advise, vtable) == 0)
+	    {
+	      goto register_handle;
+	    }
+
+	  /* If we're still here, there was no matching preloaded module,
+	     so put things back as we found them, and continue searching.  */
+	  FREE (*phandle);
+	  newhandle = NULL;
+	}
+    }
+
+  /* If we are allowing only preloaded modules, and we didn't find
+     anything yet, give up on the search here.  */
+  if (advise && advise->try_preload_only)
+    {
+      goto cleanup;
+    }
+
+  /* Check whether we are opening a libtool module (.la extension).  */
+  if (ext && streq (ext, archive_ext))
+    {
+      /* this seems to be a libtool module */
+      FILE *	file	 = 0;
+      char *	dlname	 = 0;
+      char *	old_name = 0;
+      char *	libdir	 = 0;
+      char *	deplibs	 = 0;
+
+      /* if we can't find the installed flag, it is probably an
+	 installed libtool archive, produced with an old version
+	 of libtool */
+      int	installed = 1;
+
+      /* Now try to open the .la file.  If there is no directory name
+	 component, try to find it first in user_search_path and then other
+	 prescribed paths.  Otherwise (or in any case if the module was not
+	 yet found) try opening just the module name as passed.  */
+      if (!dir)
+	{
+	  const char *search_path = user_search_path;
+
+	  if (search_path)
+	    file = find_file (user_search_path, base_name, &dir);
+
+	  if (!file)
+	    {
+	      search_path = getenv (LTDL_SEARCHPATH_VAR);
+	      if (search_path)
+		file = find_file (search_path, base_name, &dir);
+	    }
+
+#if defined(LT_MODULE_PATH_VAR)
+	  if (!file)
+	    {
+	      search_path = getenv (LT_MODULE_PATH_VAR);
+	      if (search_path)
+		file = find_file (search_path, base_name, &dir);
+	    }
+#endif
+#if defined(LT_DLSEARCH_PATH)
+	  if (!file && *sys_dlsearch_path)
+	    {
+	      file = find_file (sys_dlsearch_path, base_name, &dir);
+	    }
+#endif
+	}
+      else
+	{
+	  file = fopen (attempt, LT_READTEXT_MODE);
+	}
+
+      /* If we didn't find the file by now, it really isn't there.  Set
+	 the status flag, and bail out.  */
+      if (!file)
+	{
+	  LT__SETERROR (FILE_NOT_FOUND);
+	  ++errors;
+	  goto cleanup;
+	}
+
+      /* read the .la file */
+      if (parse_dotla_file(file, &dlname, &libdir, &deplibs,
+	    &old_name, &installed) != 0)
+	++errors;
+
+      fclose (file);
+
+      /* allocate the handle */
+      *phandle = (lt_dlhandle) lt__zalloc (sizeof (struct lt__handle));
+      if (*phandle == 0)
+	++errors;
+
+      if (errors)
+	{
+	  FREE (dlname);
+	  FREE (old_name);
+	  FREE (libdir);
+	  FREE (deplibs);
+	  FREE (*phandle);
+	  goto cleanup;
+	}
+
+      assert (*phandle);
+
+      if (load_deplibs (*phandle, deplibs) == 0)
+	{
+	  newhandle = *phandle;
+	  /* find_module may replace newhandle */
+	  if (find_module (&newhandle, dir, libdir, dlname, old_name,
+			   installed, advise))
+	    {
+	      unload_deplibs (*phandle);
+	      ++errors;
+	    }
+	}
+      else
+	{
+	  ++errors;
+	}
+
+      FREE (dlname);
+      FREE (old_name);
+      FREE (libdir);
+      FREE (deplibs);
+
+      if (errors)
+	{
+	  FREE (*phandle);
+	  goto cleanup;
+	}
+
+      if (*phandle != newhandle)
+	{
+	  unload_deplibs (*phandle);
+	}
+    }
+  else
+    {
+      /* not a libtool module */
+      *phandle = (lt_dlhandle) lt__zalloc (sizeof (struct lt__handle));
+      if (*phandle == 0)
+	{
+	  ++errors;
+	  goto cleanup;
+	}
+
+      newhandle = *phandle;
+
+      /* If the module has no directory name component, try to find it
+	 first in user_search_path and then other prescribed paths.
+	 Otherwise (or in any case if the module was not yet found) try
+	 opening just the module name as passed.  */
+      if ((dir || (!find_handle (user_search_path, base_name,
+				 &newhandle, advise)
+		   && !find_handle (getenv (LTDL_SEARCHPATH_VAR), base_name,
+				    &newhandle, advise)
+#if defined(LT_MODULE_PATH_VAR)
+		   && !find_handle (getenv (LT_MODULE_PATH_VAR), base_name,
+				    &newhandle, advise)
+#endif
+#if defined(LT_DLSEARCH_PATH)
+		   && !find_handle (sys_dlsearch_path, base_name,
+				    &newhandle, advise)
+#endif
+		   )))
+	{
+	  if (tryall_dlopen (&newhandle, attempt, advise, 0) != 0)
+	    {
+	      newhandle = NULL;
+	    }
+	}
+
+      if (!newhandle)
+	{
+	  FREE (*phandle);
+	  ++errors;
+	  goto cleanup;
+	}
+    }
+
+ register_handle:
+  MEMREASSIGN (*phandle, newhandle);
+
+  if ((*phandle)->info.ref_count == 0)
+    {
+      (*phandle)->info.ref_count	= 1;
+      MEMREASSIGN ((*phandle)->info.name, name);
+
+      (*phandle)->next	= handles;
+      handles		= *phandle;
+    }
+
+  LT__SETERRORSTR (saved_error);
+
+ cleanup:
+  FREE (dir);
+  FREE (attempt);
+  FREE (name);
+  if (!canonical)		/* was MEMREASSIGNed */
+    FREE (base_name);
+  FREE (canonical);
+  FREE (archive_name);
+
+  return errors;
+}
+
+
+/* If the last error message stored was `FILE_NOT_FOUND', then return
+   non-zero.  */
+static int
+file_not_found (void)
+{
+  const char *error = 0;
+
+  LT__GETERROR (error);
+  if (error == LT__STRERROR (FILE_NOT_FOUND))
+    return 1;
+
+  return 0;
+}
+
+
+/* Unless FILENAME already bears a suitable library extension, then
+   return 0.  */
+static int
+has_library_ext (const char *filename)
+{
+  const char *	ext     = 0;
+
+  assert (filename);
+
+  ext = strrchr (filename, '.');
+
+  if (ext && ((streq (ext, archive_ext))
+#if defined(LT_MODULE_EXT)
+	     || (streq (ext, shlib_ext))
+#endif
+#if defined(LT_SHARED_EXT)
+	     || (streq (ext, shared_ext))
+#endif
+    ))
+    {
+      return 1;
+    }
+
+  return 0;
+}
+
+
+/* Initialise and configure a user lt_dladvise opaque object.  */
+
+int
+lt_dladvise_init (lt_dladvise *padvise)
+{
+  lt_dladvise advise = (lt_dladvise) lt__zalloc (sizeof (struct lt__advise));
+  *padvise = advise;
+  return (advise ? 0 : 1);
+}
+
+int
+lt_dladvise_destroy (lt_dladvise *padvise)
+{
+  if (padvise)
+    FREE(*padvise);
+  return 0;
+}
+
+int
+lt_dladvise_ext (lt_dladvise *padvise)
+{
+  assert (padvise && *padvise);
+  (*padvise)->try_ext = 1;
+  return 0;
+}
+
+int
+lt_dladvise_resident (lt_dladvise *padvise)
+{
+  assert (padvise && *padvise);
+  (*padvise)->is_resident = 1;
+  return 0;
+}
+
+int
+lt_dladvise_local (lt_dladvise *padvise)
+{
+  assert (padvise && *padvise);
+  (*padvise)->is_symlocal = 1;
+  return 0;
+}
+
+int
+lt_dladvise_global (lt_dladvise *padvise)
+{
+  assert (padvise && *padvise);
+  (*padvise)->is_symglobal = 1;
+  return 0;
+}
+
+int
+lt_dladvise_preload (lt_dladvise *padvise)
+{
+  assert (padvise && *padvise);
+  (*padvise)->try_preload_only = 1;
+  return 0;
+}
+
+/* Libtool-1.5.x interface for loading a new module named FILENAME.  */
+lt_dlhandle
+lt_dlopen (const char *filename)
+{
+  return lt_dlopenadvise (filename, NULL);
+}
+
+
+/* If FILENAME has an ARCHIVE_EXT or MODULE_EXT extension, try to
+   open the FILENAME as passed.  Otherwise try appending ARCHIVE_EXT,
+   and if a file is still not found try again with MODULE_EXT appended
+   instead.  */
+lt_dlhandle
+lt_dlopenext (const char *filename)
+{
+  lt_dlhandle	handle	= 0;
+  lt_dladvise	advise;
+
+  if (!lt_dladvise_init (&advise) && !lt_dladvise_ext (&advise))
+    handle = lt_dlopenadvise (filename, advise);
+
+  lt_dladvise_destroy (&advise);
+  return handle;
+}
+
+
+lt_dlhandle
+lt_dlopenadvise (const char *filename, lt_dladvise advise)
+{
+  lt_dlhandle	handle	= 0;
+  int		errors	= 0;
+  const char *	saved_error	= 0;
+
+  LT__GETERROR (saved_error);
+
+  /* Can't have symbols hidden and visible at the same time!  */
+  if (advise && advise->is_symlocal && advise->is_symglobal)
+    {
+      LT__SETERROR (CONFLICTING_FLAGS);
+      return 0;
+    }
+
+  if (!filename
+      || !advise
+      || !advise->try_ext
+      || has_library_ext (filename))
+    {
+      /* Just incase we missed a code path in try_dlopen() that reports
+	 an error, but forgot to reset handle... */
+      if (try_dlopen (&handle, filename, NULL, advise) != 0)
+	return 0;
+
+      return handle;
+    }
+  else if (filename && *filename)
+    {
+
+      /* First try appending ARCHIVE_EXT.  */
+      errors += try_dlopen (&handle, filename, archive_ext, advise);
+
+      /* If we found FILENAME, stop searching -- whether we were able to
+	 load the file as a module or not.  If the file exists but loading
+	 failed, it is better to return an error message here than to
+	 report FILE_NOT_FOUND when the alternatives (foo.so etc) are not
+	 in the module search path.  */
+      if (handle || ((errors > 0) && !file_not_found ()))
+	return handle;
+
+#if defined(LT_MODULE_EXT)
+      /* Try appending SHLIB_EXT.   */
+      LT__SETERRORSTR (saved_error);
+      errors = try_dlopen (&handle, filename, shlib_ext, advise);
+
+      /* As before, if the file was found but loading failed, return now
+	 with the current error message.  */
+      if (handle || ((errors > 0) && !file_not_found ()))
+	return handle;
+#endif
+
+#if defined(LT_SHARED_EXT)
+      /* Try appending SHARED_EXT.   */
+      LT__SETERRORSTR (saved_error);
+      errors = try_dlopen (&handle, filename, shared_ext, advise);
+
+      /* As before, if the file was found but loading failed, return now
+	 with the current error message.  */
+      if (handle || ((errors > 0) && !file_not_found ()))
+	return handle;
+#endif
+    }
+
+  /* Still here?  Then we really did fail to locate any of the file
+     names we tried.  */
+  LT__SETERROR (FILE_NOT_FOUND);
+  return 0;
+}
+
+
+static int
+lt_argz_insert (char **pargz, size_t *pargz_len, char *before,
+		const char *entry)
+{
+  error_t error;
+
+  /* Prior to Sep 8, 2005, newlib had a bug where argz_insert(pargz,
+     pargz_len, NULL, entry) failed with EINVAL.  */
+  if (before)
+    error = argz_insert (pargz, pargz_len, before, entry);
+  else
+    error = argz_append (pargz, pargz_len, entry, 1 + strlen (entry));
+
+  if (error)
+    {
+      switch (error)
+	{
+	case ENOMEM:
+	  LT__SETERROR (NO_MEMORY);
+	  break;
+	default:
+	  LT__SETERROR (UNKNOWN);
+	  break;
+	}
+      return 1;
+    }
+
+  return 0;
+}
+
+static int
+lt_argz_insertinorder (char **pargz, size_t *pargz_len, const char *entry)
+{
+  char *before = 0;
+
+  assert (pargz);
+  assert (pargz_len);
+  assert (entry && *entry);
+
+  if (*pargz)
+    while ((before = argz_next (*pargz, *pargz_len, before)))
+      {
+	int cmp = strcmp (entry, before);
+
+	if (cmp < 0)  break;
+	if (cmp == 0) return 0;	/* No duplicates! */
+      }
+
+  return lt_argz_insert (pargz, pargz_len, before, entry);
+}
+
+static int
+lt_argz_insertdir (char **pargz, size_t *pargz_len, const char *dirnam,
+		   struct dirent *dp)
+{
+  char   *buf	    = 0;
+  size_t buf_len    = 0;
+  char   *end	    = 0;
+  size_t end_offset = 0;
+  size_t dir_len    = 0;
+  int    errors	    = 0;
+
+  assert (pargz);
+  assert (pargz_len);
+  assert (dp);
+
+  dir_len = LT_STRLEN (dirnam);
+  end     = dp->d_name + D_NAMLEN(dp);
+
+  /* Ignore version numbers.  */
+  {
+    char *p;
+    for (p = end; p -1 > dp->d_name; --p)
+      if (strchr (".0123456789", p[-1]) == 0)
+	break;
+
+    if (*p == '.')
+      end = p;
+  }
+
+  /* Ignore filename extension.  */
+  {
+    char *p;
+    for (p = end -1; p > dp->d_name; --p)
+      if (*p == '.')
+	{
+	  end = p;
+	  break;
+	}
+  }
+
+  /* Prepend the directory name.  */
+  end_offset	= end - dp->d_name;
+  buf_len	= dir_len + 1+ end_offset;
+  buf		= MALLOC (char, 1+ buf_len);
+  if (!buf)
+    return ++errors;
+
+  assert (buf);
+
+  strcpy  (buf, dirnam);
+  strcat  (buf, "/");
+  strncat (buf, dp->d_name, end_offset);
+  buf[buf_len] = LT_EOS_CHAR;
+
+  /* Try to insert (in order) into ARGZ/ARGZ_LEN.  */
+  if (lt_argz_insertinorder (pargz, pargz_len, buf) != 0)
+    ++errors;
+
+  FREE (buf);
+
+  return errors;
+}
+
+static int
+list_files_by_dir (const char *dirnam, char **pargz, size_t *pargz_len)
+{
+  DIR	*dirp	  = 0;
+  int    errors	  = 0;
+
+  assert (dirnam && *dirnam);
+  assert (pargz);
+  assert (pargz_len);
+  assert (dirnam[LT_STRLEN(dirnam) -1] != '/');
+
+  dirp = opendir (dirnam);
+  if (dirp)
+    {
+      struct dirent *dp	= 0;
+
+      while ((dp = readdir (dirp)))
+	if (dp->d_name[0] != '.')
+	  if (lt_argz_insertdir (pargz, pargz_len, dirnam, dp))
+	    {
+	      ++errors;
+	      break;
+	    }
+
+      closedir (dirp);
+    }
+  else
+    ++errors;
+
+  return errors;
+}
+
+
+/* If there are any files in DIRNAME, call the function passed in
+   DATA1 (with the name of each file and DATA2 as arguments).  */
+static int
+foreachfile_callback (char *dirname, void *data1, void *data2)
+{
+  file_worker_func *func = *(file_worker_func **) data1;
+
+  int	  is_done  = 0;
+  char   *argz     = 0;
+  size_t  argz_len = 0;
+
+  if (list_files_by_dir (dirname, &argz, &argz_len) != 0)
+    goto cleanup;
+  if (!argz)
+    goto cleanup;
+
+  {
+    char *filename = 0;
+    while ((filename = argz_next (argz, argz_len, filename)))
+      if ((is_done = (*func) (filename, data2)))
+	break;
+  }
+
+ cleanup:
+  FREE (argz);
+
+  return is_done;
+}
+
+
+/* Call FUNC for each unique extensionless file in SEARCH_PATH, along
+   with DATA.  The filenames passed to FUNC would be suitable for
+   passing to lt_dlopenext.  The extensions are stripped so that
+   individual modules do not generate several entries (e.g. libfoo.la,
+   libfoo.so, libfoo.so.1, libfoo.so.1.0.0).  If SEARCH_PATH is NULL,
+   then the same directories that lt_dlopen would search are examined.  */
+int
+lt_dlforeachfile (const char *search_path,
+		  int (*func) (const char *filename, void *data),
+		  void *data)
+{
+  int is_done = 0;
+  file_worker_func **fpptr = &func;
+
+  if (search_path)
+    {
+      /* If a specific path was passed, search only the directories
+	 listed in it.  */
+      is_done = foreach_dirinpath (search_path, 0,
+				   foreachfile_callback, fpptr, data);
+    }
+  else
+    {
+      /* Otherwise search the default paths.  */
+      is_done = foreach_dirinpath (user_search_path, 0,
+				   foreachfile_callback, fpptr, data);
+      if (!is_done)
+	{
+	  is_done = foreach_dirinpath (getenv(LTDL_SEARCHPATH_VAR), 0,
+				       foreachfile_callback, fpptr, data);
+	}
+
+#if defined(LT_MODULE_PATH_VAR)
+      if (!is_done)
+	{
+	  is_done = foreach_dirinpath (getenv(LT_MODULE_PATH_VAR), 0,
+				       foreachfile_callback, fpptr, data);
+	}
+#endif
+#if defined(LT_DLSEARCH_PATH)
+      if (!is_done && *sys_dlsearch_path)
+	{
+	  is_done = foreach_dirinpath (sys_dlsearch_path, 0,
+				       foreachfile_callback, fpptr, data);
+	}
+#endif
+    }
+
+  return is_done;
+}
+
+int
+lt_dlclose (lt_dlhandle handle)
+{
+  lt_dlhandle cur, last;
+  int errors = 0;
+
+  /* check whether the handle is valid */
+  last = cur = handles;
+  while (cur && handle != cur)
+    {
+      last = cur;
+      cur = cur->next;
+    }
+
+  if (!cur)
+    {
+      LT__SETERROR (INVALID_HANDLE);
+      ++errors;
+      goto done;
+    }
+
+  cur = handle;
+  cur->info.ref_count--;
+
+  /* Note that even with resident modules, we must track the ref_count
+     correctly incase the user decides to reset the residency flag
+     later (even though the API makes no provision for that at the
+     moment).  */
+  if (cur->info.ref_count <= 0 && !LT_DLIS_RESIDENT (cur))
+    {
+      lt_user_data data = cur->vtable->dlloader_data;
+
+      if (cur != handles)
+	{
+	  last->next = cur->next;
+	}
+      else
+	{
+	  handles = cur->next;
+	}
+
+      errors += cur->vtable->module_close (data, cur->module);
+      errors += unload_deplibs (handle);
+
+      /* It is up to the callers to free the data itself.  */
+      FREE (cur->interface_data);
+
+      FREE (cur->info.filename);
+      FREE (cur->info.name);
+      FREE (cur);
+
+      goto done;
+    }
+
+  if (LT_DLIS_RESIDENT (handle))
+    {
+      LT__SETERROR (CLOSE_RESIDENT_MODULE);
+      ++errors;
+    }
+
+ done:
+  return errors;
+}
+
+void *
+lt_dlsym (lt_dlhandle place, const char *symbol)
+{
+  size_t lensym;
+  char	lsym[LT_SYMBOL_LENGTH];
+  char	*sym;
+  void *address;
+  lt_user_data data;
+  lt_dlhandle handle;
+
+  if (!place)
+    {
+      LT__SETERROR (INVALID_HANDLE);
+      return 0;
+    }
+
+  handle = place;
+
+  if (!symbol)
+    {
+      LT__SETERROR (SYMBOL_NOT_FOUND);
+      return 0;
+    }
+
+  lensym = LT_STRLEN (symbol) + LT_STRLEN (handle->vtable->sym_prefix)
+					+ LT_STRLEN (handle->info.name);
+
+  if (lensym + LT_SYMBOL_OVERHEAD < LT_SYMBOL_LENGTH)
+    {
+      sym = lsym;
+    }
+  else
+    {
+      sym = MALLOC (char, lensym + LT_SYMBOL_OVERHEAD + 1);
+      if (!sym)
+	{
+	  LT__SETERROR (BUFFER_OVERFLOW);
+	  return 0;
+	}
+    }
+
+  data = handle->vtable->dlloader_data;
+  if (handle->info.name)
+    {
+      const char *saved_error;
+
+      LT__GETERROR (saved_error);
+
+      /* this is a libtool module */
+      if (handle->vtable->sym_prefix)
+	{
+	  strcpy(sym, handle->vtable->sym_prefix);
+	  strcat(sym, handle->info.name);
+	}
+      else
+	{
+	  strcpy(sym, handle->info.name);
+	}
+
+      strcat(sym, "_LTX_");
+      strcat(sym, symbol);
+
+      /* try "modulename_LTX_symbol" */
+      address = handle->vtable->find_sym (data, handle->module, sym);
+      if (address)
+	{
+	  if (sym != lsym)
+	    {
+	      FREE (sym);
+	    }
+	  return address;
+	}
+      LT__SETERRORSTR (saved_error);
+    }
+
+  /* otherwise try "symbol" */
+  if (handle->vtable->sym_prefix)
+    {
+      strcpy(sym, handle->vtable->sym_prefix);
+      strcat(sym, symbol);
+    }
+  else
+    {
+      strcpy(sym, symbol);
+    }
+
+  address = handle->vtable->find_sym (data, handle->module, sym);
+  if (sym != lsym)
+    {
+      FREE (sym);
+    }
+
+  return address;
+}
+
+const char *
+lt_dlerror (void)
+{
+  const char *error;
+
+  LT__GETERROR (error);
+  LT__SETERRORSTR (0);
+
+  return error;
+}
+
+static int
+lt_dlpath_insertdir (char **ppath, char *before, const char *dir)
+{
+  int    errors		= 0;
+  char  *canonical	= 0;
+  char  *argz		= 0;
+  size_t argz_len	= 0;
+
+  assert (ppath);
+  assert (dir && *dir);
+
+  if (canonicalize_path (dir, &canonical) != 0)
+    {
+      ++errors;
+      goto cleanup;
+    }
+
+  assert (canonical && *canonical);
+
+  /* If *PPATH is empty, set it to DIR.  */
+  if (*ppath == 0)
+    {
+      assert (!before);		/* BEFORE cannot be set without PPATH.  */
+      assert (dir);		/* Without DIR, don't call this function!  */
+
+      *ppath = lt__strdup (dir);
+      if (*ppath == 0)
+	++errors;
+
+      goto cleanup;
+    }
+
+  assert (ppath && *ppath);
+
+  if (argzize_path (*ppath, &argz, &argz_len) != 0)
+    {
+      ++errors;
+      goto cleanup;
+    }
+
+  /* Convert BEFORE into an equivalent offset into ARGZ.  This only works
+     if *PPATH is already canonicalized, and hence does not change length
+     with respect to ARGZ.  We canonicalize each entry as it is added to
+     the search path, and don't call this function with (uncanonicalized)
+     user paths, so this is a fair assumption.  */
+  if (before)
+    {
+      assert (*ppath <= before);
+      assert ((int) (before - *ppath) <= (int) strlen (*ppath));
+
+      before = before - *ppath + argz;
+    }
+
+  if (lt_argz_insert (&argz, &argz_len, before, dir) != 0)
+    {
+      ++errors;
+      goto cleanup;
+    }
+
+  argz_stringify (argz, argz_len, LT_PATHSEP_CHAR);
+  MEMREASSIGN(*ppath, argz);
+
+ cleanup:
+  FREE (argz);
+  FREE (canonical);
+
+  return errors;
+}
+
+int
+lt_dladdsearchdir (const char *search_dir)
+{
+  int errors = 0;
+
+  if (search_dir && *search_dir)
+    {
+      if (lt_dlpath_insertdir (&user_search_path, 0, search_dir) != 0)
+	++errors;
+    }
+
+  return errors;
+}
+
+int
+lt_dlinsertsearchdir (const char *before, const char *search_dir)
+{
+  int errors = 0;
+
+  if (before)
+    {
+      if ((before < user_search_path)
+	  || (before >= user_search_path + LT_STRLEN (user_search_path)))
+	{
+	  LT__SETERROR (INVALID_POSITION);
+	  return 1;
+	}
+    }
+
+  if (search_dir && *search_dir)
+    {
+      if (lt_dlpath_insertdir (&user_search_path,
+			       (char *) before, search_dir) != 0)
+	{
+	  ++errors;
+	}
+    }
+
+  return errors;
+}
+
+int
+lt_dlsetsearchpath (const char *search_path)
+{
+  int   errors	    = 0;
+
+  FREE (user_search_path);
+
+  if (!search_path || !LT_STRLEN (search_path))
+    {
+      return errors;
+    }
+
+  if (canonicalize_path (search_path, &user_search_path) != 0)
+    ++errors;
+
+  return errors;
+}
+
+const char *
+lt_dlgetsearchpath (void)
+{
+  const char *saved_path;
+
+  saved_path = user_search_path;
+
+  return saved_path;
+}
+
+int
+lt_dlmakeresident (lt_dlhandle handle)
+{
+  int errors = 0;
+
+  if (!handle)
+    {
+      LT__SETERROR (INVALID_HANDLE);
+      ++errors;
+    }
+  else
+    {
+      handle->info.is_resident = 1;
+    }
+
+  return errors;
+}
+
+int
+lt_dlisresident	(lt_dlhandle handle)
+{
+  if (!handle)
+    {
+      LT__SETERROR (INVALID_HANDLE);
+      return -1;
+    }
+
+  return LT_DLIS_RESIDENT (handle);
+}
+
+
+
+/* --- MODULE INFORMATION --- */
+
+typedef struct {
+  const char *id_string;
+  lt_dlhandle_interface *iface;
+} lt__interface_id;
+
+lt_dlinterface_id
+lt_dlinterface_register (const char *id_string, lt_dlhandle_interface *iface)
+{
+  lt__interface_id *interface_id = (lt__interface_id *) lt__malloc (sizeof *interface_id);
+
+  /* If lt__malloc fails, it will LT__SETERROR (NO_MEMORY), which
+     can then be detected with lt_dlerror() if we return 0.  */
+  if (interface_id)
+    {
+      interface_id->id_string = lt__strdup (id_string);
+      if (!interface_id->id_string)
+	FREE (interface_id);
+      else
+	interface_id->iface = iface;
+    }
+
+  return (lt_dlinterface_id) interface_id;
+}
+
+void lt_dlinterface_free (lt_dlinterface_id key)
+{
+  lt__interface_id *interface_id = (lt__interface_id *)key;
+  FREE (interface_id->id_string);
+  FREE (interface_id);
+}
+
+void *
+lt_dlcaller_set_data (lt_dlinterface_id key, lt_dlhandle handle, void *data)
+{
+  int n_elements = 0;
+  void *stale = (void *) 0;
+  lt_dlhandle cur = handle;
+  int i;
+
+  if (cur->interface_data)
+    while (cur->interface_data[n_elements].key)
+      ++n_elements;
+
+  for (i = 0; i < n_elements; ++i)
+    {
+      if (cur->interface_data[i].key == key)
+	{
+	  stale = cur->interface_data[i].data;
+	  break;
+	}
+    }
+
+  /* Ensure that there is enough room in this handle's interface_data
+     array to accept a new element (and an empty end marker).  */
+  if (i == n_elements)
+    {
+      lt_interface_data *temp
+	= REALLOC (lt_interface_data, cur->interface_data, 2+ n_elements);
+
+      if (!temp)
+	{
+	  stale = 0;
+	  goto done;
+	}
+
+      cur->interface_data = temp;
+
+      /* We only need this if we needed to allocate a new interface_data.  */
+      cur->interface_data[i].key	= key;
+      cur->interface_data[1+ i].key	= 0;
+    }
+
+  cur->interface_data[i].data = data;
+
+ done:
+  return stale;
+}
+
+void *
+lt_dlcaller_get_data (lt_dlinterface_id key, lt_dlhandle handle)
+{
+  void *result = (void *) 0;
+  lt_dlhandle cur = handle;
+
+  /* Locate the index of the element with a matching KEY.  */
+  if (cur->interface_data)
+    {
+      int i;
+      for (i = 0; cur->interface_data[i].key; ++i)
+	{
+	  if (cur->interface_data[i].key == key)
+	    {
+	      result = cur->interface_data[i].data;
+	      break;
+	    }
+	}
+    }
+
+  return result;
+}
+
+const lt_dlinfo *
+lt_dlgetinfo (lt_dlhandle handle)
+{
+  if (!handle)
+    {
+      LT__SETERROR (INVALID_HANDLE);
+      return 0;
+    }
+
+  return &(handle->info);
+}
+
+
+lt_dlhandle
+lt_dlhandle_iterate (lt_dlinterface_id iface, lt_dlhandle place)
+{
+  lt_dlhandle handle = place;
+  lt__interface_id *iterator = (lt__interface_id *) iface;
+
+  assert (iface); /* iface is a required argument */
+
+  if (!handle)
+    handle = handles;
+  else
+    handle = handle->next;
+
+  /* advance while the interface check fails */
+  while (handle && iterator->iface
+	 && ((*iterator->iface) (handle, iterator->id_string) != 0))
+    {
+      handle = handle->next;
+    }
+
+  return handle;
+}
+
+
+lt_dlhandle
+lt_dlhandle_fetch (lt_dlinterface_id iface, const char *module_name)
+{
+  lt_dlhandle handle = 0;
+
+  assert (iface); /* iface is a required argument */
+
+  while ((handle = lt_dlhandle_iterate (iface, handle)))
+    {
+      lt_dlhandle cur = handle;
+      if (cur && cur->info.name && streq (cur->info.name, module_name))
+	break;
+    }
+
+  return handle;
+}
+
+
+int
+lt_dlhandle_map (lt_dlinterface_id iface,
+		 int (*func) (lt_dlhandle handle, void *data), void *data)
+{
+  lt__interface_id *iterator = (lt__interface_id *) iface;
+  lt_dlhandle cur = handles;
+
+  assert (iface); /* iface is a required argument */
+
+  while (cur)
+    {
+      int errorcode = 0;
+
+      /* advance while the interface check fails */
+      while (cur && iterator->iface
+	     && ((*iterator->iface) (cur, iterator->id_string) != 0))
+	{
+	  cur = cur->next;
+	}
+
+      if ((errorcode = (*func) (cur, data)) != 0)
+	return errorcode;
+    }
+
+  return 0;
+}
diff --git a/libltdl/ltdl.h b/libltdl/ltdl.h
new file mode 100644
index 0000000..749a54d
--- /dev/null
+++ b/libltdl/ltdl.h
@@ -0,0 +1,163 @@
+/* ltdl.h -- generic dlopen functions
+
+   Copyright (C) 1998-2000, 2004, 2005,
+                 2007, 2008 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#if !defined(LTDL_H)
+#define LTDL_H 1
+
+#include <libltdl/lt_system.h>
+#include <libltdl/lt_error.h>
+#include <libltdl/lt_dlloader.h>
+
+LT_BEGIN_C_DECLS
+
+
+/* LT_STRLEN can be used safely on NULL pointers.  */
+#define LT_STRLEN(s)	(((s) && (s)[0]) ? strlen (s) : 0)
+
+
+/* --- DYNAMIC MODULE LOADING API --- */
+
+
+typedef	struct lt__handle *lt_dlhandle;	/* A loaded module.  */
+
+/* Initialisation and finalisation functions for libltdl. */
+LT_SCOPE int	    lt_dlinit		(void);
+LT_SCOPE int	    lt_dlexit		(void);
+
+/* Module search path manipulation.  */
+LT_SCOPE int	    lt_dladdsearchdir	 (const char *search_dir);
+LT_SCOPE int	    lt_dlinsertsearchdir (const char *before,
+						  const char *search_dir);
+LT_SCOPE int 	    lt_dlsetsearchpath	 (const char *search_path);
+LT_SCOPE const char *lt_dlgetsearchpath	 (void);
+LT_SCOPE int	    lt_dlforeachfile	 (
+			const char *search_path,
+			int (*func) (const char *filename, void *data),
+			void *data);
+
+/* User module loading advisors.  */
+LT_SCOPE int	    lt_dladvise_init	 (lt_dladvise *advise);
+LT_SCOPE int	    lt_dladvise_destroy  (lt_dladvise *advise);
+LT_SCOPE int	    lt_dladvise_ext	 (lt_dladvise *advise);
+LT_SCOPE int	    lt_dladvise_resident (lt_dladvise *advise);
+LT_SCOPE int	    lt_dladvise_local	 (lt_dladvise *advise);
+LT_SCOPE int	    lt_dladvise_global   (lt_dladvise *advise);
+LT_SCOPE int	    lt_dladvise_preload	 (lt_dladvise *advise);
+
+/* Portable libltdl versions of the system dlopen() API. */
+LT_SCOPE lt_dlhandle lt_dlopen		(const char *filename);
+LT_SCOPE lt_dlhandle lt_dlopenext	(const char *filename);
+LT_SCOPE lt_dlhandle lt_dlopenadvise	(const char *filename,
+					 lt_dladvise advise);
+LT_SCOPE void *	    lt_dlsym		(lt_dlhandle handle, const char *name);
+LT_SCOPE const char *lt_dlerror		(void);
+LT_SCOPE int	    lt_dlclose		(lt_dlhandle handle);
+
+
+
+/* --- PRELOADED MODULE SUPPORT --- */
+
+
+/* A preopened symbol. Arrays of this type comprise the exported
+   symbols for a dlpreopened module. */
+typedef struct {
+  const char *name;
+  void       *address;
+} lt_dlsymlist;
+
+typedef int lt_dlpreload_callback_func (lt_dlhandle handle);
+
+LT_SCOPE int	lt_dlpreload	     (const lt_dlsymlist *preloaded);
+LT_SCOPE int	lt_dlpreload_default (const lt_dlsymlist *preloaded);
+LT_SCOPE int	lt_dlpreload_open    (const char *originator,
+				      lt_dlpreload_callback_func *func);
+
+#define lt_preloaded_symbols	lt__PROGRAM__LTX_preloaded_symbols
+/* Ensure C linkage.  */
+extern LT_DLSYM_CONST lt_dlsymlist lt__PROGRAM__LTX_preloaded_symbols[];
+
+#define LTDL_SET_PRELOADED_SYMBOLS() \
+	lt_dlpreload_default(lt_preloaded_symbols)
+
+
+
+
+/* --- MODULE INFORMATION --- */
+
+
+/* Associating user data with loaded modules. */
+typedef void * lt_dlinterface_id;
+typedef int lt_dlhandle_interface (lt_dlhandle handle, const char *id_string);
+
+LT_SCOPE lt_dlinterface_id lt_dlinterface_register (const char *id_string,
+					  lt_dlhandle_interface *iface);
+LT_SCOPE void	lt_dlinterface_free (lt_dlinterface_id key);
+LT_SCOPE void *	lt_dlcaller_set_data  (lt_dlinterface_id key,
+					  lt_dlhandle handle, void *data);
+LT_SCOPE void *	lt_dlcaller_get_data  (lt_dlinterface_id key,
+					  lt_dlhandle handle);
+
+
+/* Read only information pertaining to a loaded module. */
+typedef	struct {
+  char *	filename;	/* file name */
+  char *	name;		/* module name */
+  int		ref_count;	/* number of times lt_dlopened minus
+				   number of times lt_dlclosed. */
+  unsigned int	is_resident:1;	/* module can't be unloaded. */
+  unsigned int	is_symglobal:1;	/* module symbols can satisfy
+				   subsequently loaded modules.  */
+  unsigned int	is_symlocal:1;	/* module symbols are only available
+				   locally. */
+} lt_dlinfo;
+
+LT_SCOPE const lt_dlinfo *lt_dlgetinfo	    (lt_dlhandle handle);
+
+LT_SCOPE lt_dlhandle	lt_dlhandle_iterate (lt_dlinterface_id iface,
+					     lt_dlhandle place);
+LT_SCOPE lt_dlhandle	lt_dlhandle_fetch   (lt_dlinterface_id iface,
+					     const char *module_name);
+LT_SCOPE int		lt_dlhandle_map	    (lt_dlinterface_id iface,
+				int (*func) (lt_dlhandle handle, void *data),
+				void *data);
+
+
+
+/* Deprecated module residency management API. */
+LT_SCOPE int	    lt_dlmakeresident	(lt_dlhandle handle);
+LT_SCOPE int	    lt_dlisresident	(lt_dlhandle handle);
+
+#define lt_ptr void *
+
+LT_END_C_DECLS
+
+#endif /*!defined(LTDL_H)*/
diff --git a/libltdl/m4/argz.m4 b/libltdl/m4/argz.m4
new file mode 100644
index 0000000..d1f4ec5
--- /dev/null
+++ b/libltdl/m4/argz.m4
@@ -0,0 +1,79 @@
+# Portability macros for glibc argz.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan <gary@gnu.org>
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 argz.m4
+
+AC_DEFUN([gl_FUNC_ARGZ],
+[gl_PREREQ_ARGZ
+
+AC_CHECK_HEADERS([argz.h], [], [], [AC_INCLUDES_DEFAULT])
+
+AC_CHECK_TYPES([error_t],
+  [],
+  [AC_DEFINE([error_t], [int],
+   [Define to a type to use for `error_t' if it is not otherwise available.])
+   AC_DEFINE([__error_t_defined], [1], [Define so that glibc/gnulib argp.h
+    does not typedef error_t.])],
+  [#if defined(HAVE_ARGZ_H)
+#  include <argz.h>
+#endif])
+
+ARGZ_H=
+AC_CHECK_FUNCS([argz_add argz_append argz_count argz_create_sep argz_insert \
+	argz_next argz_stringify], [], [ARGZ_H=argz.h; AC_LIBOBJ([argz])])
+
+dnl if have system argz functions, allow forced use of
+dnl libltdl-supplied implementation (and default to do so
+dnl on "known bad" systems). Could use a runtime check, but
+dnl (a) detecting malloc issues is notoriously unreliable
+dnl (b) only known system that declares argz functions,
+dnl     provides them, yet they are broken, is cygwin
+dnl     releases prior to 16-Mar-2007 (1.5.24 and earlier)
+dnl So, it's more straightforward simply to special case
+dnl this for known bad systems.
+AS_IF([test -z "$ARGZ_H"],
+    [AC_CACHE_CHECK(
+        [if argz actually works],
+        [lt_cv_sys_argz_works],
+        [[case $host_os in #(
+	 *cygwin*)
+	   lt_cv_sys_argz_works=no
+	   if test "$cross_compiling" != no; then
+	     lt_cv_sys_argz_works="guessing no"
+	   else
+	     lt_sed_extract_leading_digits='s/^\([0-9\.]*\).*/\1/'
+	     save_IFS=$IFS
+	     IFS=-.
+	     set x `uname -r | sed -e "$lt_sed_extract_leading_digits"`
+	     IFS=$save_IFS
+	     lt_os_major=${2-0}
+	     lt_os_minor=${3-0}
+	     lt_os_micro=${4-0}
+	     if test "$lt_os_major" -gt 1 \
+		|| { test "$lt_os_major" -eq 1 \
+		  && { test "$lt_os_minor" -gt 5 \
+		    || { test "$lt_os_minor" -eq 5 \
+		      && test "$lt_os_micro" -gt 24; }; }; }; then
+	       lt_cv_sys_argz_works=yes
+	     fi
+	   fi
+	   ;; #(
+	 *) lt_cv_sys_argz_works=yes ;;
+	 esac]])
+     AS_IF([test "$lt_cv_sys_argz_works" = yes],
+        [AC_DEFINE([HAVE_WORKING_ARGZ], 1,
+                   [This value is set to 1 to indicate that the system argz facility works])],
+        [ARGZ_H=argz.h
+        AC_LIBOBJ([argz])])])
+
+AC_SUBST([ARGZ_H])
+])
+
+# Prerequisites of lib/argz.c.
+AC_DEFUN([gl_PREREQ_ARGZ], [:])
diff --git a/libltdl/m4/autobuild.m4 b/libltdl/m4/autobuild.m4
new file mode 100644
index 0000000..93ccb54
--- /dev/null
+++ b/libltdl/m4/autobuild.m4
@@ -0,0 +1,40 @@
+# autobuild.m4 serial 7
+dnl Copyright (C) 2004, 2006, 2007, 2008, 2009, 2010 Free Software Foundation,
+dnl Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Simon Josefsson
+
+# Usage: AB_INIT([MODE]).
+AC_DEFUN([AB_INIT],
+[
+  AC_REQUIRE([AC_CANONICAL_BUILD])
+  AC_REQUIRE([AC_CANONICAL_HOST])
+
+  if test -z "$AB_PACKAGE"; then
+    AB_PACKAGE=${PACKAGE_NAME:-$PACKAGE}
+  fi
+  AC_MSG_NOTICE([autobuild project... $AB_PACKAGE])
+
+  if test -z "$AB_VERSION"; then
+    AB_VERSION=${PACKAGE_VERSION:-$VERSION}
+  fi
+  AC_MSG_NOTICE([autobuild revision... $AB_VERSION])
+
+  hostname=`hostname`
+  if test "$hostname"; then
+    AC_MSG_NOTICE([autobuild hostname... $hostname])
+  fi
+
+  ifelse([$1],[],,[AC_MSG_NOTICE([autobuild mode... $1])])
+
+  date=`TZ=UTC0 date +%Y%m%dT%H%M%SZ`
+  if test "$?" != 0; then
+    date=`date`
+  fi
+  if test "$date"; then
+    AC_MSG_NOTICE([autobuild timestamp... $date])
+  fi
+])
diff --git a/libltdl/m4/libtool.m4 b/libltdl/m4/libtool.m4
new file mode 100644
index 0000000..44e0ecf
--- /dev/null
+++ b/libltdl/m4/libtool.m4
@@ -0,0 +1,7982 @@
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    _LT_PATH_MAGIC
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable.  If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins.  After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script.  The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+  lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  _LT_PROG_REPLACE_SHELLFNS
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Go],			[_LT_LANG(GO)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_GO.  When it is available in    #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC],     [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+  if test -n "$ac_tool_prefix"; then
+    AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+  fi
+fi
+if test -z "$GOC"; then
+  AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+  [LT_LANG(GO)],
+  [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi])
+
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
+    ])
+
+    AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+      [lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+      echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+      $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+      echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+      $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&AS_MESSAGE_LOG_FD
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[012]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+                  [FC],  [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+  else
+    _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  fi
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+  [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+  lt_aix_libpath_sed='[
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }]'
+  _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi],[])
+  if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+    _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+  fi
+  ])
+  aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*" 
+}
+
+case "$ECHO" in
+  printf*) AC_MSG_RESULT([printf]) ;;
+  print*) AC_MSG_RESULT([print -r]) ;;
+  *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+  test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+    ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test "X`printf %s $ECHO`" = "X$ECHO" \
+      || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[  --with-sysroot[=DIR] Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted.  We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   AC_MSG_RESULT([${with_sysroot}])
+   AC_MSG_ERROR([The sysroot must be an absolute path.])
+   ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+    [AC_LANG_PUSH(C)
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LANG_POP])
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if AC_TRY_EVAL(ac_compile); then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+  [lt_cv_ar_at_file=no
+   AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+     [echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+      AC_TRY_EVAL([lt_ar_try])
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	AC_TRY_EVAL([lt_ar_try])
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+     ])
+  ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+  [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+    [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$3"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       $2=yes
+     fi
+   fi
+   $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+    m4_if([$5], , :, [$5])
+else
+    m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+  [$2=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $3"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&AS_MESSAGE_LOG_FD
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         $2=yes
+       fi
+     else
+       $2=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+    m4_if([$4], , :, [$4])
+else
+    m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+  i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+  AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+  [$4]
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}]
+_LT_EOF
+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) $1 ;;
+      x$lt_dlneed_uscore) $2 ;;
+      x$lt_dlunknown|x*) $3 ;;
+    esac
+  else :
+    # compilation failed
+    $3
+  fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ])
+    ;;
+
+  *)
+    AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen="shl_load"],
+      [AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+	      ])
+	    ])
+	  ])
+	])
+      ])
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+    ])
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+      ])
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&AS_MESSAGE_LOG_FD
+   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+     fi
+   fi
+   chmod u+w . 2>&AS_MESSAGE_LOG_FD
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  AC_MSG_CHECKING([if we can lock with hard links])
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  AC_MSG_RESULT([$hard_links])
+  if test "$hard_links" = no; then
+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+    # Linking always hardcodes the temporary library directory.
+    _LT_TAGVAR(hardcode_action, $1)=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    _LT_TAGVAR(hardcode_action, $1)=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
+    ;;
+  esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+	[], [
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[[4-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[[01]] | aix4.[[01]].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[[45]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+m4_if([$1], [],[
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[[23]].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[[3-9]]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+    [lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+	 LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+    AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+      [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+	 [lt_cv_shlibpath_overrides_runpath=yes])])
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+    ])
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+    [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$1; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  AC_MSG_RESULT($MAGIC_CMD)
+else
+  AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+  else
+    MAGIC_CMD=:
+  fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  AC_MSG_CHECKING([for ld used by $CC])
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [[\\/]]* | ?:[[\\/]]*)
+      re_direlt='/[[^/]][[^/]]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  AC_MSG_CHECKING([for GNU ld])
+else
+  AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  AC_MSG_RESULT($LD)
+else
+  AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+  lt_cv_ld_reload_flag,
+  [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[[45]]*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[[3-9]]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+    [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+    [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+  AC_SUBST([DUMPBIN])
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+#  -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+    [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+  [lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+  ;;
+*)
+  AC_CHECK_LIB(m, cos, LIBM="-lm")
+  ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+  esac
+
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT@&t@_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
+else
+  AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+    [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	m4_if([$1], [GCJ], [],
+	  [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+    esac
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+      if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+        *Intel*\ [[CF]]*Compiler*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	  ;;
+	*Portland\ Group*)
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    unicos*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
+
+    *)
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    # Also, AIX nm treats weak defined symbols like other global defined
+    # symbols, whereas GNU nm marks them as "W".
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl*)
+      _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+      ;;
+    esac
+    ;;
+  *)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+], [
+  runpath_var=
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  _LT_TAGVAR(ld_shlibs, $1)=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+	  *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+      _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    haiku*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        _LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+    esac
+
+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
+
+    aix[[4-9]]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX([$1])
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX([$1])
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  fi
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[[45]]*)
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	_LT_TAGVAR(always_export_symbols, $1)=yes
+	_LT_TAGVAR(file_list_spec, $1)='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	_LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	_LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	_LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	# FIXME: Should let the user specify the lib program.
+	_LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+      _LT_DARWIN_LINKER_FEATURES($1)
+      ;;
+
+    dgux*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	m4_if($1, [], [
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  _LT_LINKER_OPTION([if $CC understands -b],
+	    _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+	    [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+	    [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+	  [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+	  [lt_cv_irix_exported_symbol],
+	  [save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   AC_LINK_IFELSE(
+	     [AC_LANG_SOURCE(
+	        [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+			      [C++], [[int foo (void) { return 0; }]],
+			      [Fortran 77], [[
+      subroutine foo
+      end]],
+			      [Fortran], [[
+      subroutine foo
+      end]])])],
+	      [lt_cv_irix_exported_symbol=yes],
+	      [lt_cv_irix_exported_symbol=no])
+           LDFLAGS="$save_LDFLAGS"])
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    newsos6)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
+
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
+
+    solaris*)
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    sysv4.3*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
+
+    *)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+	[lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+	[$RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	  pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+	  _LT_TAGVAR(allow_undefined_flag, $1)=
+	  if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+	  then
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	  else
+	    lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  fi
+	  _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+	])
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+    [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report which library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
+
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[[4-9]]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
+
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
+
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
+
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
+
+      LT_PATH_LD
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
+
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX([$1])
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX([$1])
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    if test "$with_gnu_ld" = yes; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    fi
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=yes
+	  _LT_TAGVAR(file_list_spec, $1)='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=".dll"
+	  # FIXME: Setting linknames here is a bad hack.
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	    else
+	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	    fi~
+	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	    linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+	  # Don't use ranlib
+	  _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+	  _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+	    lt_tool_outputfile="@TOOL_OUTPUT@"~
+	    case $lt_outputfile in
+	      *.exe|*.EXE) ;;
+	      *)
+		lt_outputfile="$lt_outputfile.exe"
+		lt_tool_outputfile="$lt_tool_outputfile.exe"
+		;;
+	    esac~
+	    func_to_tool_file "$lt_outputfile"~
+	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	      $RM "$lt_outputfile.manifest";
+	    fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  _LT_TAGVAR(always_export_symbols, $1)=no
+	  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file (1st line
+	    # is EXPORTS), use it as is; otherwise, prepend...
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      cp $export_symbols $output_objdir/$soname.def;
+	    else
+	      echo EXPORTS > $output_objdir/$soname.def;
+	      cat $export_symbols >> $output_objdir/$soname.def;
+	    fi~
+	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
+
+      gnu*)
+        ;;
+
+      haiku*)
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        ;;
+
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
+
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
+
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+	      '"$_LT_TAGVAR(old_archive_cmds, $1)"
+	    _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+	      '"$_LT_TAGVAR(reload_cmds, $1)"
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
+
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+    _LT_TAGVAR(GCC, $1)="$GXX"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case ${prev}${p} in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test "$pre_test_object_deps_done" = no; then
+	 case ${prev} in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC* | sunCC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$G77"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+  CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+
+  _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([	 ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+    case ${1} in
+      */*) func_dirname_result="${1%/*}${2}" ;;
+      *  ) func_dirname_result="${3}" ;;
+    esac
+    func_basename_result="${1##*/}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+    # positional parameters, so assign one to ordinary parameter first.
+    func_stripname_result=${3}
+    func_stripname_result=${func_stripname_result#"${1}"}
+    func_stripname_result=${func_stripname_result%"${2}"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+    func_split_long_opt_name=${1%%=*}
+    func_split_long_opt_arg=${1#*=}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+    func_split_short_opt_arg=${1#??}
+    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+  _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+    case ${1} in
+      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+      *)    func_lo2o_result=${1} ;;
+    esac])
+
+  _LT_PROG_FUNCTION_REPLACE([func_xform], [    func_xform_result=${1%.*}.lo])
+
+  _LT_PROG_FUNCTION_REPLACE([func_arith], [    func_arith_result=$(( $[*] ))])
+
+  _LT_PROG_FUNCTION_REPLACE([func_len], [    func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  _LT_PROG_FUNCTION_REPLACE([func_append], [    eval "${1}+=\\${2}"])
+
+  _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+    func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+    eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path).  These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+         [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+         [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/libltdl/m4/ltdl.m4 b/libltdl/m4/ltdl.m4
new file mode 100644
index 0000000..ea76f4d
--- /dev/null
+++ b/libltdl/m4/ltdl.m4
@@ -0,0 +1,817 @@
+# ltdl.m4 - Configure ltdl for the target system. -*-Autoconf-*-
+#
+#   Copyright (C) 1999-2006, 2007, 2008, 2011 Free Software Foundation, Inc.
+#   Written by Thomas Tanner, 1999
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 18 LTDL_INIT
+
+# LT_CONFIG_LTDL_DIR(DIRECTORY, [LTDL-MODE])
+# ------------------------------------------
+# DIRECTORY contains the libltdl sources.  It is okay to call this
+# function multiple times, as long as the same DIRECTORY is always given.
+AC_DEFUN([LT_CONFIG_LTDL_DIR],
+[AC_BEFORE([$0], [LTDL_INIT])
+_$0($*)
+])# LT_CONFIG_LTDL_DIR
+
+# We break this out into a separate macro, so that we can call it safely
+# internally without being caught accidentally by the sed scan in libtoolize.
+m4_defun([_LT_CONFIG_LTDL_DIR],
+[dnl remove trailing slashes
+m4_pushdef([_ARG_DIR], m4_bpatsubst([$1], [/*$]))
+m4_case(_LTDL_DIR,
+	[], [dnl only set lt_ltdl_dir if _ARG_DIR is not simply `.'
+	     m4_if(_ARG_DIR, [.],
+	             [],
+		 [m4_define([_LTDL_DIR], _ARG_DIR)
+	          _LT_SHELL_INIT([lt_ltdl_dir=']_ARG_DIR['])])],
+    [m4_if(_ARG_DIR, _LTDL_DIR,
+	    [],
+	[m4_fatal([multiple libltdl directories: `]_LTDL_DIR[', `]_ARG_DIR['])])])
+m4_popdef([_ARG_DIR])
+])# _LT_CONFIG_LTDL_DIR
+
+# Initialise:
+m4_define([_LTDL_DIR], [])
+
+
+# _LT_BUILD_PREFIX
+# ----------------
+# If Autoconf is new enough, expand to `${top_build_prefix}', otherwise
+# to `${top_builddir}/'.
+m4_define([_LT_BUILD_PREFIX],
+[m4_ifdef([AC_AUTOCONF_VERSION],
+   [m4_if(m4_version_compare(m4_defn([AC_AUTOCONF_VERSION]), [2.62]),
+	  [-1], [m4_ifdef([_AC_HAVE_TOP_BUILD_PREFIX],
+			  [${top_build_prefix}],
+			  [${top_builddir}/])],
+	  [${top_build_prefix}])],
+   [${top_builddir}/])[]dnl
+])
+
+
+# LTDL_CONVENIENCE
+# ----------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called here.  LIBLTDL will be prefixed with
+# '${top_build_prefix}' if available, otherwise with '${top_builddir}/',
+# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
+# quotes!).  If your package is not flat and you're not using automake,
+# define top_build_prefix, top_builddir, and top_srcdir appropriately
+# in your Makefiles.
+AC_DEFUN([LTDL_CONVENIENCE],
+[AC_BEFORE([$0], [LTDL_INIT])dnl
+dnl Although the argument is deprecated and no longer documented,
+dnl LTDL_CONVENIENCE used to take a DIRECTORY orgument, if we have one
+dnl here make sure it is the same as any other declaration of libltdl's
+dnl location!  This also ensures lt_ltdl_dir is set when configure.ac is
+dnl not yet using an explicit LT_CONFIG_LTDL_DIR.
+m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl
+_$0()
+])# LTDL_CONVENIENCE
+
+# AC_LIBLTDL_CONVENIENCE accepted a directory argument in older libtools,
+# now we have LT_CONFIG_LTDL_DIR:
+AU_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])])
+_LTDL_CONVENIENCE])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [])
+
+
+# _LTDL_CONVENIENCE
+# -----------------
+# Code shared by LTDL_CONVENIENCE and LTDL_INIT([convenience]).
+m4_defun([_LTDL_CONVENIENCE],
+[case $enable_ltdl_convenience in
+  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+esac
+LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdlc.la"
+LTDLDEPS=$LIBLTDL
+LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}"
+
+AC_SUBST([LIBLTDL])
+AC_SUBST([LTDLDEPS])
+AC_SUBST([LTDLINCL])
+
+# For backwards non-gettext consistent compatibility...
+INCLTDL="$LTDLINCL"
+AC_SUBST([INCLTDL])
+])# _LTDL_CONVENIENCE
+
+
+# LTDL_INSTALLABLE
+# ----------------
+# sets LIBLTDL to the link flags for the libltdl installable library
+# and LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments.  Note that
+# AC_CONFIG_SUBDIRS is not called from here.  If an installed libltdl
+# is not found, LIBLTDL will be prefixed with '${top_build_prefix}' if
+# available, otherwise with '${top_builddir}/', and LTDLINCL will be
+# prefixed with '${top_srcdir}/' (note the single quotes!).  If your
+# package is not flat and you're not using automake, define top_build_prefix,
+# top_builddir, and top_srcdir appropriately in your Makefiles.
+# In the future, this macro may have to be called after LT_INIT.
+AC_DEFUN([LTDL_INSTALLABLE],
+[AC_BEFORE([$0], [LTDL_INIT])dnl
+dnl Although the argument is deprecated and no longer documented,
+dnl LTDL_INSTALLABLE used to take a DIRECTORY orgument, if we have one
+dnl here make sure it is the same as any other declaration of libltdl's
+dnl location!  This also ensures lt_ltdl_dir is set when configure.ac is
+dnl not yet using an explicit LT_CONFIG_LTDL_DIR.
+m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl
+_$0()
+])# LTDL_INSTALLABLE
+
+# AC_LIBLTDL_INSTALLABLE accepted a directory argument in older libtools,
+# now we have LT_CONFIG_LTDL_DIR:
+AU_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])])
+_LTDL_INSTALLABLE])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [])
+
+
+# _LTDL_INSTALLABLE
+# -----------------
+# Code shared by LTDL_INSTALLABLE and LTDL_INIT([installable]).
+m4_defun([_LTDL_INSTALLABLE],
+[if test -f $prefix/lib/libltdl.la; then
+  lt_save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="-L$prefix/lib $LDFLAGS"
+  AC_CHECK_LIB([ltdl], [lt_dlinit], [lt_lib_ltdl=yes])
+  LDFLAGS="$lt_save_LDFLAGS"
+  if test x"${lt_lib_ltdl-no}" = xyes; then
+    if test x"$enable_ltdl_install" != xyes; then
+      # Don't overwrite $prefix/lib/libltdl.la without --enable-ltdl-install
+      AC_MSG_WARN([not overwriting libltdl at $prefix, force with `--enable-ltdl-install'])
+      enable_ltdl_install=no
+    fi
+  elif test x"$enable_ltdl_install" = xno; then
+    AC_MSG_WARN([libltdl not installed, but installation disabled])
+  fi
+fi
+
+# If configure.ac declared an installable ltdl, and the user didn't override
+# with --disable-ltdl-install, we will install the shipped libltdl.
+case $enable_ltdl_install in
+  no) ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+      LIBLTDL="-lltdl"
+      LTDLDEPS=
+      LTDLINCL=
+      ;;
+  *)  enable_ltdl_install=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-install"
+      LIBLTDL='_LT_BUILD_PREFIX'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdl.la"
+      LTDLDEPS=$LIBLTDL
+      LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}"
+      ;;
+esac
+
+AC_SUBST([LIBLTDL])
+AC_SUBST([LTDLDEPS])
+AC_SUBST([LTDLINCL])
+
+# For backwards non-gettext consistent compatibility...
+INCLTDL="$LTDLINCL"
+AC_SUBST([INCLTDL])
+])# LTDL_INSTALLABLE
+
+
+# _LTDL_MODE_DISPATCH
+# -------------------
+m4_define([_LTDL_MODE_DISPATCH],
+[dnl If _LTDL_DIR is `.', then we are configuring libltdl itself:
+m4_if(_LTDL_DIR, [],
+	[],
+    dnl if _LTDL_MODE was not set already, the default value is `subproject':
+    [m4_case(m4_default(_LTDL_MODE, [subproject]),
+	  [subproject], [AC_CONFIG_SUBDIRS(_LTDL_DIR)
+			  _LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"])],
+	  [nonrecursive], [_LT_SHELL_INIT([lt_dlopen_dir="$lt_ltdl_dir"; lt_libobj_prefix="$lt_ltdl_dir/"])],
+	  [recursive], [],
+	[m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])])dnl
+dnl Be careful not to expand twice:
+m4_define([$0], [])
+])# _LTDL_MODE_DISPATCH
+
+
+# _LT_LIBOBJ(MODULE_NAME)
+# -----------------------
+# Like AC_LIBOBJ, except that MODULE_NAME goes into _LT_LIBOBJS instead
+# of into LIBOBJS.
+AC_DEFUN([_LT_LIBOBJ], [
+  m4_pattern_allow([^_LT_LIBOBJS$])
+  _LT_LIBOBJS="$_LT_LIBOBJS $1.$ac_objext"
+])# _LT_LIBOBJS
+
+
+# LTDL_INIT([OPTIONS])
+# --------------------
+# Clients of libltdl can use this macro to allow the installer to
+# choose between a shipped copy of the ltdl sources or a preinstalled
+# version of the library.  If the shipped ltdl sources are not in a
+# subdirectory named libltdl, the directory name must be given by
+# LT_CONFIG_LTDL_DIR.
+AC_DEFUN([LTDL_INIT],
+[dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+dnl We need to keep our own list of libobjs separate from our parent project,
+dnl and the easiest way to do that is redefine the AC_LIBOBJs macro while
+dnl we look for our own LIBOBJs.
+m4_pushdef([AC_LIBOBJ], m4_defn([_LT_LIBOBJ]))
+m4_pushdef([AC_LIBSOURCES])
+
+dnl If not otherwise defined, default to the 1.5.x compatible subproject mode:
+m4_if(_LTDL_MODE, [],
+        [m4_define([_LTDL_MODE], m4_default([$2], [subproject]))
+        m4_if([-1], [m4_bregexp(_LTDL_MODE, [\(subproject\|\(non\)?recursive\)])],
+                [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])])
+
+AC_ARG_WITH([included_ltdl],
+    [AS_HELP_STRING([--with-included-ltdl],
+                    [use the GNU ltdl sources included here])])
+
+if test "x$with_included_ltdl" != xyes; then
+  # We are not being forced to use the included libltdl sources, so
+  # decide whether there is a useful installed version we can use.
+  AC_CHECK_HEADER([ltdl.h],
+      [AC_CHECK_DECL([lt_dlinterface_register],
+	   [AC_CHECK_LIB([ltdl], [lt_dladvise_preload],
+	       [with_included_ltdl=no],
+	       [with_included_ltdl=yes])],
+	   [with_included_ltdl=yes],
+	   [AC_INCLUDES_DEFAULT
+	    #include <ltdl.h>])],
+      [with_included_ltdl=yes],
+      [AC_INCLUDES_DEFAULT]
+  )
+fi
+
+dnl If neither LT_CONFIG_LTDL_DIR, LTDL_CONVENIENCE nor LTDL_INSTALLABLE
+dnl was called yet, then for old times' sake, we assume libltdl is in an
+dnl eponymous directory:
+AC_PROVIDE_IFELSE([LT_CONFIG_LTDL_DIR], [], [_LT_CONFIG_LTDL_DIR([libltdl])])
+
+AC_ARG_WITH([ltdl_include],
+    [AS_HELP_STRING([--with-ltdl-include=DIR],
+                    [use the ltdl headers installed in DIR])])
+
+if test -n "$with_ltdl_include"; then
+  if test -f "$with_ltdl_include/ltdl.h"; then :
+  else
+    AC_MSG_ERROR([invalid ltdl include directory: `$with_ltdl_include'])
+  fi
+else
+  with_ltdl_include=no
+fi
+
+AC_ARG_WITH([ltdl_lib],
+    [AS_HELP_STRING([--with-ltdl-lib=DIR],
+                    [use the libltdl.la installed in DIR])])
+
+if test -n "$with_ltdl_lib"; then
+  if test -f "$with_ltdl_lib/libltdl.la"; then :
+  else
+    AC_MSG_ERROR([invalid ltdl library directory: `$with_ltdl_lib'])
+  fi
+else
+  with_ltdl_lib=no
+fi
+
+case ,$with_included_ltdl,$with_ltdl_include,$with_ltdl_lib, in
+  ,yes,no,no,)
+	m4_case(m4_default(_LTDL_TYPE, [convenience]),
+	    [convenience], [_LTDL_CONVENIENCE],
+	    [installable], [_LTDL_INSTALLABLE],
+	  [m4_fatal([unknown libltdl build type: ]_LTDL_TYPE)])
+	;;
+  ,no,no,no,)
+	# If the included ltdl is not to be used, then use the
+	# preinstalled libltdl we found.
+	AC_DEFINE([HAVE_LTDL], [1],
+	  [Define this if a modern libltdl is already installed])
+	LIBLTDL=-lltdl
+	LTDLDEPS=
+	LTDLINCL=
+	;;
+  ,no*,no,*)
+	AC_MSG_ERROR([`--with-ltdl-include' and `--with-ltdl-lib' options must be used together])
+	;;
+  *)	with_included_ltdl=no
+	LIBLTDL="-L$with_ltdl_lib -lltdl"
+	LTDLDEPS=
+	LTDLINCL="-I$with_ltdl_include"
+	;;
+esac
+INCLTDL="$LTDLINCL"
+
+# Report our decision...
+AC_MSG_CHECKING([where to find libltdl headers])
+AC_MSG_RESULT([$LTDLINCL])
+AC_MSG_CHECKING([where to find libltdl library])
+AC_MSG_RESULT([$LIBLTDL])
+
+_LTDL_SETUP
+
+dnl restore autoconf definition.
+m4_popdef([AC_LIBOBJ])
+m4_popdef([AC_LIBSOURCES])
+
+AC_CONFIG_COMMANDS_PRE([
+    _ltdl_libobjs=
+    _ltdl_ltlibobjs=
+    if test -n "$_LT_LIBOBJS"; then
+      # Remove the extension.
+      _lt_sed_drop_objext='s/\.o$//;s/\.obj$//'
+      for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do
+        _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext"
+        _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo"
+      done
+    fi
+    AC_SUBST([ltdl_LIBOBJS], [$_ltdl_libobjs])
+    AC_SUBST([ltdl_LTLIBOBJS], [$_ltdl_ltlibobjs])
+])
+
+# Only expand once:
+m4_define([LTDL_INIT])
+])# LTDL_INIT
+
+# Old names:
+AU_DEFUN([AC_LIB_LTDL], [LTDL_INIT($@)])
+AU_DEFUN([AC_WITH_LTDL], [LTDL_INIT($@)])
+AU_DEFUN([LT_WITH_LTDL], [LTDL_INIT($@)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIB_LTDL], [])
+dnl AC_DEFUN([AC_WITH_LTDL], [])
+dnl AC_DEFUN([LT_WITH_LTDL], [])
+
+
+# _LTDL_SETUP
+# -----------
+# Perform all the checks necessary for compilation of the ltdl objects
+#  -- including compiler checks and header checks.  This is a public
+# interface  mainly for the benefit of libltdl's own configure.ac, most
+# other users should call LTDL_INIT instead.
+AC_DEFUN([_LTDL_SETUP],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_SYS_MODULE_EXT])dnl
+AC_REQUIRE([LT_SYS_MODULE_PATH])dnl
+AC_REQUIRE([LT_SYS_DLSEARCH_PATH])dnl
+AC_REQUIRE([LT_LIB_DLLOAD])dnl
+AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl
+AC_REQUIRE([LT_FUNC_DLSYM_USCORE])dnl
+AC_REQUIRE([LT_SYS_DLOPEN_DEPLIBS])dnl
+AC_REQUIRE([gl_FUNC_ARGZ])dnl
+
+m4_require([_LT_CHECK_OBJDIR])dnl
+m4_require([_LT_HEADER_DLFCN])dnl
+m4_require([_LT_CHECK_DLPREOPEN])dnl
+m4_require([_LT_DECL_SED])dnl
+
+dnl Don't require this, or it will be expanded earlier than the code
+dnl that sets the variables it relies on:
+_LT_ENABLE_INSTALL
+
+dnl _LTDL_MODE specific code must be called at least once:
+_LTDL_MODE_DISPATCH
+
+# In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS
+# the user used.  This is so that ltdl.h can pick up the parent projects
+# config.h file, The first file in AC_CONFIG_HEADERS must contain the
+# definitions required by ltdl.c.
+# FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility).
+AC_CONFIG_COMMANDS_PRE([dnl
+m4_pattern_allow([^LT_CONFIG_H$])dnl
+m4_ifset([AH_HEADER],
+    [LT_CONFIG_H=AH_HEADER],
+    [m4_ifset([AC_LIST_HEADERS],
+	    [LT_CONFIG_H=`echo "AC_LIST_HEADERS" | $SED 's,^[[      ]]*,,;s,[[ :]].*$,,'`],
+	[])])])
+AC_SUBST([LT_CONFIG_H])
+
+AC_CHECK_HEADERS([unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h],
+	[], [], [AC_INCLUDES_DEFAULT])
+
+AC_CHECK_FUNCS([closedir opendir readdir], [], [AC_LIBOBJ([lt__dirent])])
+AC_CHECK_FUNCS([strlcat strlcpy], [], [AC_LIBOBJ([lt__strl])])
+
+m4_pattern_allow([LT_LIBEXT])dnl
+AC_DEFINE_UNQUOTED([LT_LIBEXT],["$libext"],[The archive extension])
+
+name=
+eval "lt_libprefix=\"$libname_spec\""
+m4_pattern_allow([LT_LIBPREFIX])dnl
+AC_DEFINE_UNQUOTED([LT_LIBPREFIX],["$lt_libprefix"],[The archive prefix])
+
+name=ltdl
+eval "LTDLOPEN=\"$libname_spec\""
+AC_SUBST([LTDLOPEN])
+])# _LTDL_SETUP
+
+
+# _LT_ENABLE_INSTALL
+# ------------------
+m4_define([_LT_ENABLE_INSTALL],
+[AC_ARG_ENABLE([ltdl-install],
+    [AS_HELP_STRING([--enable-ltdl-install], [install libltdl])])
+
+case ,${enable_ltdl_install},${enable_ltdl_convenience} in
+  *yes*) ;;
+  *) enable_ltdl_convenience=yes ;;
+esac
+
+m4_ifdef([AM_CONDITIONAL],
+[AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno)
+ AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno)])
+])# _LT_ENABLE_INSTALL
+
+
+# LT_SYS_DLOPEN_DEPLIBS
+# ---------------------
+AC_DEFUN([LT_SYS_DLOPEN_DEPLIBS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_CACHE_CHECK([whether deplibs are loaded by dlopen],
+  [lt_cv_sys_dlopen_deplibs],
+  [# PORTME does your system automatically load deplibs for dlopen?
+  # or its logical equivalent (e.g. shl_load for HP-UX < 11)
+  # For now, we just catch OSes we know something about -- in the
+  # future, we'll try test this programmatically.
+  lt_cv_sys_dlopen_deplibs=unknown
+  case $host_os in
+  aix3*|aix4.1.*|aix4.2.*)
+    # Unknown whether this is true for these versions of AIX, but
+    # we want this `case' here to explicitly catch those versions.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  aix[[4-9]]*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  amigaos*)
+    case $host_cpu in
+    powerpc)
+      lt_cv_sys_dlopen_deplibs=no
+      ;;
+    esac
+    ;;
+  darwin*)
+    # Assuming the user has installed a libdl from somewhere, this is true
+    # If you are looking for one http://www.opendarwin.org/projects/dlcompat
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  freebsd* | dragonfly*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu)
+    # GNU and its variants, using gnu ld.so (Glibc)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  hpux10*|hpux11*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  interix*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  irix[[12345]]*|irix6.[[01]]*)
+    # Catch all versions of IRIX before 6.2, and indicate that we don't
+    # know how it worked for any of those versions.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  irix*)
+    # The case above catches anything before 6.2, and it's known that
+    # at 6.2 and later dlopen does load deplibs.
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  netbsd*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  openbsd*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  osf[[1234]]*)
+    # dlopen did load deplibs (at least at 4.x), but until the 5.x series,
+    # it did *not* use an RPATH in a shared library to find objects the
+    # library depends on, so we explicitly say `no'.
+    lt_cv_sys_dlopen_deplibs=no
+    ;;
+  osf5.0|osf5.0a|osf5.1)
+    # dlopen *does* load deplibs and with the right loader patch applied
+    # it even uses RPATH in a shared library to search for shared objects
+    # that the library depends on, but there's no easy way to know if that
+    # patch is installed.  Since this is the case, all we can really
+    # say is unknown -- it depends on the patch being installed.  If
+    # it is, this changes to `yes'.  Without it, it would be `no'.
+    lt_cv_sys_dlopen_deplibs=unknown
+    ;;
+  osf*)
+    # the two cases above should catch all versions of osf <= 5.1.  Read
+    # the comments above for what we know about them.
+    # At > 5.1, deplibs are loaded *and* any RPATH in a shared library
+    # is used to find them so we can finally say `yes'.
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  qnx*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  solaris*)
+    lt_cv_sys_dlopen_deplibs=yes
+    ;;
+  sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+    libltdl_cv_sys_dlopen_deplibs=yes
+    ;;
+  esac
+  ])
+if test "$lt_cv_sys_dlopen_deplibs" != yes; then
+ AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1],
+    [Define if the OS needs help to load dependent libraries for dlopen().])
+fi
+])# LT_SYS_DLOPEN_DEPLIBS
+
+# Old name:
+AU_ALIAS([AC_LTDL_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], [])
+
+
+# LT_SYS_MODULE_EXT
+# -----------------
+AC_DEFUN([LT_SYS_MODULE_EXT],
+[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl
+AC_CACHE_CHECK([which extension is used for runtime loadable modules],
+  [libltdl_cv_shlibext],
+[
+module=yes
+eval libltdl_cv_shlibext=$shrext_cmds
+module=no
+eval libltdl_cv_shrext=$shrext_cmds
+  ])
+if test -n "$libltdl_cv_shlibext"; then
+  m4_pattern_allow([LT_MODULE_EXT])dnl
+  AC_DEFINE_UNQUOTED([LT_MODULE_EXT], ["$libltdl_cv_shlibext"],
+    [Define to the extension used for runtime loadable modules, say, ".so".])
+fi
+if test "$libltdl_cv_shrext" != "$libltdl_cv_shlibext"; then
+  m4_pattern_allow([LT_SHARED_EXT])dnl
+  AC_DEFINE_UNQUOTED([LT_SHARED_EXT], ["$libltdl_cv_shrext"],
+    [Define to the shared library suffix, say, ".dylib".])
+fi
+])# LT_SYS_MODULE_EXT
+
+# Old name:
+AU_ALIAS([AC_LTDL_SHLIBEXT], [LT_SYS_MODULE_EXT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SHLIBEXT], [])
+
+
+# LT_SYS_MODULE_PATH
+# ------------------
+AC_DEFUN([LT_SYS_MODULE_PATH],
+[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl
+AC_CACHE_CHECK([which variable specifies run-time module search path],
+  [lt_cv_module_path_var], [lt_cv_module_path_var="$shlibpath_var"])
+if test -n "$lt_cv_module_path_var"; then
+  m4_pattern_allow([LT_MODULE_PATH_VAR])dnl
+  AC_DEFINE_UNQUOTED([LT_MODULE_PATH_VAR], ["$lt_cv_module_path_var"],
+    [Define to the name of the environment variable that determines the run-time module search path.])
+fi
+])# LT_SYS_MODULE_PATH
+
+# Old name:
+AU_ALIAS([AC_LTDL_SHLIBPATH], [LT_SYS_MODULE_PATH])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SHLIBPATH], [])
+
+
+# LT_SYS_DLSEARCH_PATH
+# --------------------
+AC_DEFUN([LT_SYS_DLSEARCH_PATH],
+[m4_require([_LT_SYS_DYNAMIC_LINKER])dnl
+AC_CACHE_CHECK([for the default library search path],
+  [lt_cv_sys_dlsearch_path],
+  [lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"])
+if test -n "$lt_cv_sys_dlsearch_path"; then
+  sys_dlsearch_path=
+  for dir in $lt_cv_sys_dlsearch_path; do
+    if test -z "$sys_dlsearch_path"; then
+      sys_dlsearch_path="$dir"
+    else
+      sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir"
+    fi
+  done
+  m4_pattern_allow([LT_DLSEARCH_PATH])dnl
+  AC_DEFINE_UNQUOTED([LT_DLSEARCH_PATH], ["$sys_dlsearch_path"],
+    [Define to the system default library search path.])
+fi
+])# LT_SYS_DLSEARCH_PATH
+
+# Old name:
+AU_ALIAS([AC_LTDL_SYSSEARCHPATH], [LT_SYS_DLSEARCH_PATH])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SYSSEARCHPATH], [])
+
+
+# _LT_CHECK_DLPREOPEN
+# -------------------
+m4_defun([_LT_CHECK_DLPREOPEN],
+[m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen],
+  [libltdl_cv_preloaded_symbols],
+  [if test -n "$lt_cv_sys_global_symbol_pipe"; then
+    libltdl_cv_preloaded_symbols=yes
+  else
+    libltdl_cv_preloaded_symbols=no
+  fi
+  ])
+if test x"$libltdl_cv_preloaded_symbols" = xyes; then
+  AC_DEFINE([HAVE_PRELOADED_SYMBOLS], [1],
+    [Define if libtool can extract symbol lists from object files.])
+fi
+])# _LT_CHECK_DLPREOPEN
+
+
+# LT_LIB_DLLOAD
+# -------------
+AC_DEFUN([LT_LIB_DLLOAD],
+[m4_pattern_allow([^LT_DLLOADERS$])
+LT_DLLOADERS=
+AC_SUBST([LT_DLLOADERS])
+
+AC_LANG_PUSH([C])
+
+LIBADD_DLOPEN=
+AC_SEARCH_LIBS([dlopen], [dl],
+	[AC_DEFINE([HAVE_LIBDL], [1],
+		   [Define if you have the libdl library or equivalent.])
+	if test "$ac_cv_search_dlopen" != "none required" ; then
+	  LIBADD_DLOPEN="-ldl"
+	fi
+	libltdl_cv_lib_dl_dlopen="yes"
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"],
+    [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#if HAVE_DLFCN_H
+#  include <dlfcn.h>
+#endif
+    ]], [[dlopen(0, 0);]])],
+	    [AC_DEFINE([HAVE_LIBDL], [1],
+		       [Define if you have the libdl library or equivalent.])
+	    libltdl_cv_func_dlopen="yes"
+	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"],
+	[AC_CHECK_LIB([svld], [dlopen],
+		[AC_DEFINE([HAVE_LIBDL], [1],
+			 [Define if you have the libdl library or equivalent.])
+	        LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes"
+		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"])])])
+if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes
+then
+  lt_save_LIBS="$LIBS"
+  LIBS="$LIBS $LIBADD_DLOPEN"
+  AC_CHECK_FUNCS([dlerror])
+  LIBS="$lt_save_LIBS"
+fi
+AC_SUBST([LIBADD_DLOPEN])
+
+LIBADD_SHL_LOAD=
+AC_CHECK_FUNC([shl_load],
+	[AC_DEFINE([HAVE_SHL_LOAD], [1],
+		   [Define if you have the shl_load function.])
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"],
+    [AC_CHECK_LIB([dld], [shl_load],
+	    [AC_DEFINE([HAVE_SHL_LOAD], [1],
+		       [Define if you have the shl_load function.])
+	    LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"
+	    LIBADD_SHL_LOAD="-ldld"])])
+AC_SUBST([LIBADD_SHL_LOAD])
+
+case $host_os in
+darwin[[1567]].*)
+# We only want this for pre-Mac OS X 10.4.
+  AC_CHECK_FUNC([_dyld_func_lookup],
+	[AC_DEFINE([HAVE_DYLD], [1],
+		   [Define if you have the _dyld_func_lookup function.])
+	LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"])
+  ;;
+beos*)
+  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la"
+  ;;
+cygwin* | mingw* | os2* | pw32*)
+  AC_CHECK_DECLS([cygwin_conv_path], [], [], [[#include <sys/cygwin.h>]])
+  LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la"
+  ;;
+esac
+
+AC_CHECK_LIB([dld], [dld_link],
+	[AC_DEFINE([HAVE_DLD], [1],
+		   [Define if you have the GNU dld library.])
+		LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"])
+AC_SUBST([LIBADD_DLD_LINK])
+
+m4_pattern_allow([^LT_DLPREOPEN$])
+LT_DLPREOPEN=
+if test -n "$LT_DLLOADERS"
+then
+  for lt_loader in $LT_DLLOADERS; do
+    LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader "
+  done
+  AC_DEFINE([HAVE_LIBDLLOADER], [1],
+            [Define if libdlloader will be built on this platform])
+fi
+AC_SUBST([LT_DLPREOPEN])
+
+dnl This isn't used anymore, but set it for backwards compatibility
+LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD"
+AC_SUBST([LIBADD_DL])
+
+AC_LANG_POP
+])# LT_LIB_DLLOAD
+
+# Old name:
+AU_ALIAS([AC_LTDL_DLLIB], [LT_LIB_DLLOAD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_DLLIB], [])
+
+
+# LT_SYS_SYMBOL_USCORE
+# --------------------
+# does the compiler prefix global symbols with an underscore?
+AC_DEFUN([LT_SYS_SYMBOL_USCORE],
+[m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+AC_CACHE_CHECK([for _ prefix in compiled symbols],
+  [lt_cv_sys_symbol_underscore],
+  [lt_cv_sys_symbol_underscore=no
+  cat > conftest.$ac_ext <<_LT_EOF
+void nm_test_func(){}
+int main(){nm_test_func;return 0;}
+_LT_EOF
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    ac_nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
+      # See whether the symbols have a leading underscore.
+      if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
+        lt_cv_sys_symbol_underscore=yes
+      else
+        if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
+	  :
+        else
+	  echo "configure: cannot find nm_test_func in $ac_nlist" >&AS_MESSAGE_LOG_FD
+        fi
+      fi
+    else
+      echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+    fi
+  else
+    echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.c >&AS_MESSAGE_LOG_FD
+  fi
+  rm -rf conftest*
+  ])
+  sys_symbol_underscore=$lt_cv_sys_symbol_underscore
+  AC_SUBST([sys_symbol_underscore])
+])# LT_SYS_SYMBOL_USCORE
+
+# Old name:
+AU_ALIAS([AC_LTDL_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_SYMBOL_USCORE], [])
+
+
+# LT_FUNC_DLSYM_USCORE
+# --------------------
+AC_DEFUN([LT_FUNC_DLSYM_USCORE],
+[AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl
+if test x"$lt_cv_sys_symbol_underscore" = xyes; then
+  if test x"$libltdl_cv_func_dlopen" = xyes ||
+     test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then
+	AC_CACHE_CHECK([whether we have to add an underscore for dlsym],
+	  [libltdl_cv_need_uscore],
+	  [libltdl_cv_need_uscore=unknown
+          save_LIBS="$LIBS"
+          LIBS="$LIBS $LIBADD_DLOPEN"
+	  _LT_TRY_DLOPEN_SELF(
+	    [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes],
+	    [],				 [libltdl_cv_need_uscore=cross])
+	  LIBS="$save_LIBS"
+	])
+  fi
+fi
+
+if test x"$libltdl_cv_need_uscore" = xyes; then
+  AC_DEFINE([NEED_USCORE], [1],
+    [Define if dlsym() requires a leading underscore in symbol names.])
+fi
+])# LT_FUNC_DLSYM_USCORE
+
+# Old name:
+AU_ALIAS([AC_LTDL_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LTDL_DLSYM_USCORE], [])
diff --git a/libltdl/m4/ltoptions.m4 b/libltdl/m4/ltoptions.m4
new file mode 100644
index 0000000..5d9acd8
--- /dev/null
+++ b/libltdl/m4/ltoptions.m4
@@ -0,0 +1,384 @@
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+#   Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+  		   [_LT_ENABLE_FAST_INSTALL])
+  ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac],
+    [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/libltdl/m4/ltsugar.m4 b/libltdl/m4/ltsugar.m4
new file mode 100644
index 0000000..9000a05
--- /dev/null
+++ b/libltdl/m4/ltsugar.m4
@@ -0,0 +1,123 @@
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
diff --git a/libltdl/m4/ltversion.in b/libltdl/m4/ltversion.in
new file mode 100644
index 0000000..9793b48
--- /dev/null
+++ b/libltdl/m4/ltversion.in
@@ -0,0 +1,23 @@
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial @MACRO_SERIAL@ ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [@MACRO_VERSION@])
+m4_define([LT_PACKAGE_REVISION], [@MACRO_REVISION@])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='@MACRO_VERSION@'
+macro_revision='@MACRO_REVISION@'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff --git a/libltdl/m4/ltversion.m4 b/libltdl/m4/ltversion.m4
new file mode 100644
index 0000000..07a8602
--- /dev/null
+++ b/libltdl/m4/ltversion.m4
@@ -0,0 +1,23 @@
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3337 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.2'
+macro_revision='1.3337'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff --git a/libltdl/m4/lt~obsolete.m4 b/libltdl/m4/lt~obsolete.m4
new file mode 100644
index 0000000..c573da9
--- /dev/null
+++ b/libltdl/m4/lt~obsolete.m4
@@ -0,0 +1,98 @@
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS],	[AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP],		[AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS],	[AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77],		[AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC],		[AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX],		[AC_DEFUN([_LT_PROG_CXX])])
diff --git a/libltdl/slist.c b/libltdl/slist.c
new file mode 100644
index 0000000..25906a4
--- /dev/null
+++ b/libltdl/slist.c
@@ -0,0 +1,379 @@
+/* slist.c -- generalised singly linked lists
+
+   Copyright (C) 2000, 2004, 2007, 2008, 2009 Free Software Foundation, Inc.
+   Written by Gary V. Vaughan, 2000
+
+   NOTE: The canonical source of this file is maintained with the
+   GNU Libtool package.  Report bugs to bug-libtool@gnu.org.
+
+GNU Libltdl is free software; you can redistribute it and/or
+modify it under the terms of the GNU Lesser General Public
+License as published by the Free Software Foundation; either
+version 2 of the License, or (at your option) any later version.
+
+As a special exception to the GNU Lesser General Public License,
+if you distribute this file as part of a program or library that
+is built using GNU Libtool, you may include this file under the
+same distribution terms that you use for the rest of that program.
+
+GNU Libltdl is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU Lesser General Public License for more details.
+
+You should have received a copy of the GNU Lesser General Public
+License along with GNU Libltdl; see the file COPYING.LIB.  If not, a
+copy can be downloaded from  http://www.gnu.org/licenses/lgpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include <assert.h>
+
+#include "slist.h"
+#include <stddef.h>
+#include <stdlib.h>
+
+static SList *	slist_sort_merge    (SList *left, SList *right,
+				     SListCompare *compare, void *userdata);
+
+
+/* Call DELETE repeatedly on each element of HEAD.
+
+   CAVEAT: If you call this when HEAD is the start of a list of boxed
+           items, you must remember that each item passed back to your
+	   DELETE function will be a boxed item that must be slist_unbox()ed
+	   before operating on its contents.
+
+   e.g. void boxed_delete (void *item) { item_free (slist_unbox (item)); }
+        ...
+	  slist = slist_delete (slist, boxed_delete);
+	...
+*/
+SList *
+slist_delete (SList *head, void (*delete_fct) (void *item))
+{
+  assert (delete_fct);
+
+  while (head)
+    {
+      SList *next = head->next;
+      (*delete_fct) (head);
+      head = next;
+    }
+
+  return 0;
+}
+
+/* Call FIND repeatedly with MATCHDATA and each item of *PHEAD, until
+   FIND returns non-NULL, or the list is exhausted.  If a match is found
+   the matching item is destructively removed from *PHEAD, and the value
+   returned by the matching call to FIND is returned.
+
+   CAVEAT: To avoid memory leaks, unless you already have the address of
+           the stale item, you should probably return that from FIND if
+	   it makes a successful match.  Don't forget to slist_unbox()
+	   every item in a boxed list before operating on its contents.   */
+SList *
+slist_remove (SList **phead, SListCallback *find, void *matchdata)
+{
+  SList *stale = 0;
+  void *result = 0;
+
+  assert (find);
+
+  if (!phead || !*phead)
+    return 0;
+
+  /* Does the head of the passed list match? */
+  result = (*find) (*phead, matchdata);
+  if (result)
+    {
+      stale = *phead;
+      *phead = stale->next;
+    }
+  /* what about the rest of the elements? */
+  else
+    {
+      SList *head;
+      for (head = *phead; head->next; head = head->next)
+	{
+	  result = (*find) (head->next, matchdata);
+	  if (result)
+	    {
+	      stale		= head->next;
+	      head->next	= stale->next;
+	      break;
+	    }
+	}
+    }
+
+  return (SList *) result;
+}
+
+/* Call FIND repeatedly with each element of SLIST and MATCHDATA, until
+   FIND returns non-NULL, or the list is exhausted.  If a match is found
+   the value returned by the matching call to FIND is returned. */
+void *
+slist_find (SList *slist, SListCallback *find, void *matchdata)
+{
+  void *result = 0;
+
+  assert (find);
+
+  for (; slist; slist = slist->next)
+    {
+      result = (*find) (slist, matchdata);
+      if (result)
+	break;
+    }
+
+  return result;
+}
+
+/* Return a single list, composed by destructively concatenating the
+   items in HEAD and TAIL.  The values of HEAD and TAIL are undefined
+   after calling this function.
+
+   CAVEAT: Don't mix boxed and unboxed items in a single list.
+
+   e.g.  slist1 = slist_concat (slist1, slist2);  */
+SList *
+slist_concat (SList *head, SList *tail)
+{
+  SList *last;
+
+  if (!head)
+    {
+      return tail;
+    }
+
+  last = head;
+  while (last->next)
+    last = last->next;
+
+  last->next = tail;
+
+  return head;
+}
+
+/* Return a single list, composed by destructively appending all of
+   the items in SLIST to ITEM.  The values of ITEM and SLIST are undefined
+   after calling this function.
+
+   CAVEAT:  Don't mix boxed and unboxed items in a single list.
+
+   e.g.  slist1 = slist_cons (slist_box (data), slist1);  */
+SList *
+slist_cons (SList *item, SList *slist)
+{
+  if (!item)
+    {
+      return slist;
+    }
+
+  assert (!item->next);
+
+  item->next = slist;
+  return item;
+}
+
+/* Return a list starting at the second item of SLIST.  */
+SList *
+slist_tail (SList *slist)
+{
+  return slist ? slist->next : NULL;
+}
+
+/* Return a list starting at the Nth item of SLIST.  If SLIST is less
+   than N items long, NULL is returned.  Just to be confusing, list items
+   are counted from 1, to get the 2nd element of slist:
+
+   e.g. shared_list = slist_nth (slist, 2);  */
+SList *
+slist_nth (SList *slist, size_t n)
+{
+  for (;n > 1 && slist; n--)
+    slist = slist->next;
+
+  return slist;
+}
+
+/* Return the number of items in SLIST.  We start counting from 1, so
+   the length of a list with no items is 0, and so on.  */
+size_t
+slist_length (SList *slist)
+{
+  size_t n;
+
+  for (n = 0; slist; ++n)
+    slist = slist->next;
+
+  return n;
+}
+
+/* Destructively reverse the order of items in SLIST.  The value of SLIST
+   is undefined after calling this function.
+
+  CAVEAT: You must store the result of this function, or you might not
+          be able to get all the items except the first one back again.
+
+  e.g.    slist = slist_reverse (slist);  */
+SList *
+slist_reverse (SList *slist)
+{
+  SList *result = 0;
+  SList *next;
+
+  while (slist)
+    {
+      next		= slist->next;
+      slist->next	= result;
+      result		= slist;
+      slist 		= next;
+    }
+
+  return result;
+}
+
+/* Call FOREACH once for each item in SLIST, passing both the item and
+   USERDATA on each call. */
+void *
+slist_foreach (SList *slist, SListCallback *foreach, void *userdata)
+{
+  void *result = 0;
+
+  assert (foreach);
+
+  while (slist)
+    {
+      SList *next = slist->next;
+      result = (*foreach) (slist, userdata);
+
+      if (result)
+	break;
+
+      slist = next;
+    }
+
+  return result;
+}
+
+/* Destructively merge the items of two ordered lists LEFT and RIGHT,
+   returning a single sorted list containing the items of both --  Part of
+   the quicksort algorithm.  The values of LEFT and RIGHT are undefined
+   after calling this function.
+
+   At each iteration, add another item to the merged list by taking the
+   lowest valued item from the head of either LEFT or RIGHT, determined
+   by passing those items and USERDATA to COMPARE.  COMPARE should return
+   less than 0 if the head of LEFT has the lower value, greater than 0 if
+   the head of RIGHT has the lower value, otherwise 0.  */
+static SList *
+slist_sort_merge (SList *left, SList *right, SListCompare *compare,
+		  void *userdata)
+{
+  SList merged, *insert;
+
+  insert = &merged;
+
+  while (left && right)
+    {
+      if ((*compare) (left, right, userdata) <= 0)
+	{
+	  insert = insert->next = left;
+	  left = left->next;
+	}
+      else
+	{
+	  insert = insert->next = right;
+	  right = right->next;
+	}
+    }
+
+  insert->next = left ? left : right;
+
+  return merged.next;
+}
+
+/* Perform a destructive quicksort on the items in SLIST, by repeatedly
+   calling COMPARE with a pair of items from SLIST along with USERDATA
+   at every iteration.  COMPARE is a function as defined above for
+   slist_sort_merge().  The value of SLIST is undefined after calling
+   this function.
+
+   e.g.  slist = slist_sort (slist, compare, 0);  */
+SList *
+slist_sort (SList *slist, SListCompare *compare, void *userdata)
+{
+  SList *left, *right;
+
+  if (!slist)
+    return slist;
+
+  /* Be sure that LEFT and RIGHT never contain the same item.  */
+  left = slist;
+  right = slist->next;
+
+  if (!right)
+    return left;
+
+  /* Skip two items with RIGHT and one with SLIST, until RIGHT falls off
+     the end.  SLIST must be about half way along.  */
+  while (right && (right = right->next))
+    {
+      if (!right || !(right = right->next))
+	break;
+      slist = slist->next;
+    }
+  right = slist->next;
+  slist->next = 0;
+
+  /* Sort LEFT and RIGHT, then merge the two.  */
+  return slist_sort_merge (slist_sort (left, compare, userdata),
+			   slist_sort (right, compare, userdata),
+			   compare, userdata);
+}
+
+
+/* Aside from using the functions above to manage chained structures of
+   any type that has a NEXT pointer as its first field, SLISTs can
+   be comprised of boxed items.  The boxes are chained together in
+   that case, so there is no need for a NEXT field in the item proper.
+   Some care must be taken to slist_box and slist_unbox each item in
+   a boxed list at the appropriate points to avoid leaking the memory
+   used for the boxes.  It us usually a very bad idea to mix boxed and
+   non-boxed items in a single list.  */
+
+/* Return a `boxed' freshly mallocated 1 element list containing
+   USERDATA.  */
+SList *
+slist_box (const void *userdata)
+{
+  SList *item = (SList *) malloc (sizeof *item);
+
+  if (item)
+    {
+      item->next     = 0;
+      item->userdata = userdata;
+    }
+
+  return item;
+}
+
+/* Return the contents of a `boxed' ITEM, recycling the box itself.  */
+void *
+slist_unbox (SList *item)
+{
+  void *userdata = 0;
+
+  if (item)
+    {
+      /* Strip the const, because responsibility for this memory
+	 passes to the caller on return.  */
+      userdata = (void *) item->userdata;
+      free (item);
+    }
+
+  return userdata;
+}
diff --git a/libltdl/stamp-mk b/libltdl/stamp-mk
new file mode 100644
index 0000000..859afb1
--- /dev/null
+++ b/libltdl/stamp-mk
@@ -0,0 +1 @@
+stamp
diff --git a/libtoolize.in b/libtoolize.in
new file mode 100644
index 0000000..2bce172
--- /dev/null
+++ b/libtoolize.in
@@ -0,0 +1,2555 @@
+#! /bin/sh
+# Generated from libtoolize.m4sh by GNU Autoconf 2.68.
+
+# libtoolize (GNU libtool) 2.4.2
+# Written by Gary V. Vaughan <gary@gnu.org>, 2003
+
+# Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
+# Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# Libtoolize is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Libtoolize is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with libtoolize; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]...
+#
+# Prepare a package to use libtool.
+#
+#   -c, --copy          copy files rather than symlinking them
+#       --debug         enable verbose shell tracing
+#   -n, --dry-run       print commands rather than running them
+#   -f, --force         replace existing files
+#   -i, --install       copy missing auxiliary files
+#       --ltdl[=DIR]    install libltdl sources [default: libltdl]
+#       --no-warn       don't display warning messages
+#       --nonrecursive  prepare ltdl for non-recursive make
+#   -q, --quiet         work silently
+#       --recursive     prepare ltdl for recursive make
+#       --subproject    prepare ltdl to configure and build independently
+#   -v, --verbose       verbosely report processing
+#       --version       print version information and exit
+#   -h, --help          print short or long help message
+#
+# The following space or comma delimited options can be passed to $progname
+# via the environment variable LIBTOOLIZE_OPTIONS, unknown environment
+# options are ignored:
+#
+#   --debug             enable verbose shell tracing
+#   --no-warn           don't display warning messages
+#   --quiet             work silently
+#   --verbose           verbosely report processing
+#
+# You must `cd' to the top directory of your package before you run
+# `$progname'.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#       host-triplet:	@host_triplet@
+#       $progname:	(GNU libtool) 2.4.2
+#       automake:		$automake_version
+#       autoconf:		$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+: ${TAR=tar}
+
+PROGRAM=libtoolize
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested=""
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   break 2
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${EGREP="@EGREP@"}
+: ${FGREP="@FGREP@"}
+: ${GREP="@GREP@"}
+: ${LN_S="@LN_S@"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="@SED@"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "$1" | $SED \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $opt_debug
+
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# / /
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    echo
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
+func_help ()
+{
+    $opt_debug
+
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+	:print
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
+	p
+	d
+     }
+     /^# .* home page:/b print
+     /^# General help using/b print
+     ' < "$progpath"
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    $opt_debug
+
+    func_error "missing argument for $1."
+    exit_cmd=exit
+}
+
+
+# func_split_short_opt shortopt
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+func_split_short_opt ()
+{
+    my_sed_short_opt='1s/^\(..\).*$/\1/;q'
+    my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+
+    func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
+    func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
+} # func_split_short_opt may be replaced by extended shell implementation
+
+
+# func_split_long_opt longopt
+# Set func_split_long_opt_name and func_split_long_opt_arg shell
+# variables after splitting LONGOPT at the `=' sign.
+func_split_long_opt ()
+{
+    my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
+    my_sed_long_arg='1s/^--[^=]*=//'
+
+    func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
+    func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
+} # func_split_long_opt may be replaced by extended shell implementation
+
+exit_cmd=:
+
+
+
+
+
+# ltdl can be installed to be self-contained (subproject, the default);
+# or to be configured by a parent project, either with a recursive or
+# nonrecursive automake driven make:
+ltdl_mode=
+
+# Locations for important files:
+ltdldir=
+
+# Parse environment options
+{
+  my_sed_env_opt='1s/^\([^,:; ]*\).*$/\1/;q'
+  my_sed_env_rest='1s/^[^,:; ]*[,:; ]*\(.*\)$/\1/;q'
+
+  while test -n "$LIBTOOLIZE_OPTIONS"; do
+    opt=`echo "$LIBTOOLIZE_OPTIONS" | sed "$my_sed_env_opt"`
+    LIBTOOLIZE_OPTIONS=`echo "$LIBTOOLIZE_OPTIONS" | sed "$my_sed_env_rest"`
+
+    case $opt in
+      --debug|--no-warn|--quiet|--verbose)
+		envopts="${envopts+$envopts }$opt"			  ;;
+      --*)	env_warning="${env_warning+$env_warning
+}unrecognized environment option \`$opt'" 				  ;;
+      *)	func_fatal_help "garbled LIBTOOLIZE_OPTIONS near \`$opt'" ;;
+    esac
+  done
+
+  test -n "$envopts" && {
+    func_quote_for_eval "$envopts"
+    eval set dummy "$func_quote_for_eval_result" ${1+"$@"}
+    shift
+  }
+}
+
+
+
+# Option defaults:
+opt_debug=:
+opt_copy=false
+opt_force=false
+opt_install=false
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+opt_nonrecursive=false
+opt_recursive=false
+opt_standalone=false
+opt_ltdl="false"
+
+
+# Parse options once, thoroughly.  This comes as soon as possible in the
+# script to make things like `--version' happen as quickly as we can.
+{
+  # this just eases exit handling
+  while test $# -gt 0; do
+    opt="$1"
+    shift
+    case $opt in
+      --debug|-x)	opt_debug='set -x'
+			func_echo "enabling shell trace mode"
+			$opt_debug
+			;;
+      --copy|-c)
+			opt_copy=:
+			;;
+      --force|-f)
+			opt_force=:
+			;;
+      --install|-i)
+			opt_install=:
+			;;
+      --dry-run|--dryrun|-n)
+			opt_dry_run=:
+CP="func_echo_all $CP"
+test -n "$LN_S" && LN_S="func_echo_all $LN_S"
+MKDIR="func_echo_all $MKDIR"
+RM="func_echo_all $RM"
+TAR="func_echo_all $TAR"
+			;;
+      --quiet|--automake|-q)
+			opt_quiet=:
+			;;
+      --verbose|-v)
+			opt_verbose=:
+			;;
+      --no-warning|--no-warn)
+			opt_warning=false
+			;;
+      --nonrecursive|--non-recursive)
+			opt_nonrecursive=:
+			;;
+      --recursive)
+			opt_recursive=:
+			;;
+      --standalone)
+			opt_standalone=:
+			;;
+      --ltdl)
+			optarg="$1"
+			if test $# -gt 0; then
+			    case $optarg in # ((
+			        -*) ;;
+			        *) opt_ltdl="$optarg"; shift ;;
+			    esac
+			fi
+# This is tricky, since we're overloading $opt_ltdl to be the
+# optarg for --ltdl during option processing, but then stashing
+# the (optional) optarg in $ltdldir and reusing $opt_ltdl to
+# indicate that --ltdl was seen during option processing.  Also,
+# be careful that --ltdl=foo --ltdl=bar results in ltdldir=bar:
+case $opt_ltdl in
+          false|:) ;;  # a bare '--ltdl' followed by another option
+  *)       ltdldir=`$ECHO "$optarg" | $SED 's,/*$,,'` ;;
+esac
+opt_ltdl=:
+			;;
+
+      -\?|-h)		func_usage				;;
+      --help)		func_help				;;
+      --version)	func_version				;;
+
+      # Separate optargs to long options:
+      --*=*)
+			func_split_long_opt "$opt"
+			set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      # Separate non-argument short options:
+      -\?*|-h*|-c*|-f*|-i*|-n*|-q*|-v*)
+			func_split_short_opt "$opt"
+			set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
+			shift
+			;;
+
+      --)		break					;;
+      -*)		func_fatal_help "unrecognized option \`$opt'" ;;
+      *)		set dummy "$opt" ${1+"$@"};	shift; break  ;;
+    esac
+  done
+
+  # Validate options:
+
+  # show any warnings saved by LIBTOOLIZE_OPTIONS parsing
+  test -n "$env_warning" &&
+    echo "$env_warning" |while read line; do func_warning "$line"; done
+
+  # validate $opt_nonrecursive, $opt_recursive and $opt_standalone
+  if $opt_nonrecursive; then
+    if $opt_recursive || $opt_standalone; then
+      func_error "you can have at most one of --non-recursive, --recursive and --standalone"
+    fi
+    ltdl_mode=nonrecursive
+  elif $opt_recursive; then
+    $opt_standalone &&
+      func_error "you can have at most one of --non-recursive, --recursive and --standalone"
+    ltdl_mode=recursive
+  elif $opt_standalone; then
+    ltdl_mode=standalone
+  fi
+
+  # any remaining arguments are an error
+  test $# -gt 0 &&
+    func_fatal_help "unknown additional arguments: \`${1+}'"
+
+
+  # Bail if the options were screwed
+  $exit_cmd $EXIT_FAILURE
+}
+
+
+
+
+# func_echo_once msg_var
+# Calls func_echo with the value of MSG_VAR, and then sets MSG_VAR="" so
+# that subsequent calls have no effect.
+func_echo_once ()
+{
+    $opt_debug
+    if test -n "$1"; then
+      eval my_msg=\$$1
+
+      if test -n "$my_msg"; then
+        func_echo "$my_msg"
+        eval $1=""
+      fi
+    fi
+}
+
+
+# func_copy srcfile destfile [msg_var]
+# A wrapper for func_copy_cb that accepts arguments in the same order
+# as the cp(1) shell command.
+func_copy ()
+{
+    $opt_debug
+
+    test -f "$1" || \
+      { func_error "\`$1' not copied:  not a regular file"; return 1; }
+
+    func_dirname_and_basename "$1"
+    my_f1=$func_basename_result
+
+    if test -d "$2"; then
+
+      func_copy_cb "$my_f1" \
+	`$ECHO "$1" | $SED "$dirname"` "$2" "$3"
+
+    else
+
+      # Supporting this would mean changing the timestamp:
+      func_dirname_and_basename "$2"
+      my_tname=$func_basename_result
+      test "X$my_f1" = "X$my_tname" \
+        || func_fatal_error "func_copy() cannot change filename on copy"
+
+      func_copy_cb "$my_f1" \
+        `$ECHO "$1" | $SED "$dirname"` \
+        `$ECHO "$2" | $SED "$dirname"` \
+	"$3"
+
+    fi
+
+    return $copy_return_status # set in func_copy_cb
+}
+
+
+# func_copy_cb filename srcdir destdir [msg_var]
+# If option `--copy' was specified, or soft-linking SRCFILE to DESTFILE fails,
+# then try to copy SRCFILE to DESTFILE (without changing the timestamp if
+# possible).
+func_copy_cb ()
+{
+    $opt_debug
+    my_file="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_msg_var="$4"
+    copy_return_status=1
+
+    # Libtool is probably misinstalled if this happens:
+    test -f "$my_srcdir/$my_file" ||
+        func_fatal_error "\`$my_file' not found in \`$my_srcdir'"
+
+    case $opt_verbose in
+      false) my_copy_msg="file \`$my_destdir/$my_file'"     ;;
+      *)     my_copy_msg="file from \`$my_srcdir/$my_file'" ;;
+    esac
+    func_mkdir_p `$ECHO "$my_destdir/$my_file" | $SED "$dirname"`
+
+    $RM "$my_destdir/$my_file"
+    if $opt_copy; then
+      if { ( cd "$my_srcdir" && $TAR chf - "$my_file" ) 2>/dev/null \
+           | ( umask 0 && cd "$my_destdir" && $TAR xf - ) >/dev/null 2>&1; } \
+	 && touch "$my_destdir/$my_file"; then
+	$opt_quiet || func_echo_once "$my_msg_var"
+	$opt_quiet || func_echo "copying $my_copy_msg"
+	copy_return_status=0
+      fi
+    else
+      if test "$my_file" = "aclocal.m4"; then
+	if { ( cd "$my_srcdir" && $TAR chf - "$my_file" ) 2>/dev/null \
+	     | ( umask 0 && cd "$my_destdir" && $TAR xf - ) >/dev/null 2>&1 ; }
+	then
+	  $opt_quiet || func_echo_once "$my_msg_var"
+	  $opt_quiet || func_echo "copying $my_copy_msg"
+	  copy_return_status=0
+	fi
+      else
+	if $LN_S "$my_srcdir/$my_file" "$my_destdir/$my_file"; then
+	  $opt_quiet || func_echo_once "$my_msg_var"
+	  $opt_quiet || func_echo "linking $my_copy_msg"
+	  copy_return_status=0
+	fi
+      fi
+    fi
+    if test "$copy_return_status" != 0; then
+      $opt_quiet || func_echo_once "$my_msg_var"
+      func_error "can not copy \`$my_srcdir/$my_file' to \`$my_destdir/'"
+      exit_status=$EXIT_FAILURE
+    fi
+}
+
+
+# func_copy_some_files srcfile_spec srcdir destdir [msg_var] [cb=func_copy_cb]
+# Call COPY_CB for each regular file in SRCDIR named by the ':' delimited
+# names in SRCFILE_SPEC.  The odd calling convention is needed to allow
+# spaces in file and directory names.
+func_copy_some_files ()
+{
+    $opt_debug
+    my_srcfile_spec="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_msg_var="$4"
+    my_copy_cb="${5-func_copy_cb}"
+
+    my_save_IFS="$IFS"
+    IFS=:
+    for my_filename in $my_srcfile_spec; do
+      IFS="$my_save_IFS"
+      if test -f "$my_srcdir/$my_filename"; then
+        if test "X$my_copy_cb" = Xfunc_copy_cb; then
+	  $opt_force || if test -f "$my_destdir/$my_filename"; then
+	    $opt_quiet || func_echo_once "$my_msg_var"
+	    $opt_quiet \
+	      || func_error "\`$my_destdir/$my_filename' exists: use \`--force' to overwrite"
+	    continue
+	  fi
+        fi
+      else
+	func_echo_once "$my_msg_var"
+	func_fatal_error "\`$my_filename' not found in \`$my_srcdir'"
+      fi
+
+      $my_copy_cb "$my_filename" "$my_srcdir" "$my_destdir" "$my_msg_var"
+    done
+    IFS="$my_save_IFS"
+}
+
+
+# func_fixup_Makefile srcfile srcdir destdir
+func_fixup_Makefile ()
+{
+    $opt_debug
+    my_filename="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_fixup_non_subpackage_script="\
+      s,(LIBOBJS),(ltdl_LIBOBJS),g
+      s,(LTLIBOBJS),(ltdl_LTLIBOBJS),g
+      s,libltdl/configure.ac,,
+      s,libltdl/configure,,
+      s,libltdl/aclocal.m4,,
+      s,libltdl/config-h.in,,
+      s,libltdl/Makefile.am,,
+      s,libltdl/Makefile.in,,
+      /^[	 ]*\\\\\$/d"
+    case $my_filename in
+      Makefile.am)
+	my_fixup_non_subpackage_script=`echo "$my_fixup_non_subpackage_script" | \
+		sed 's,libltdl/,,'`
+	my_fixup_inc_paths_script= ;;
+      Makefile.inc)
+	repl=$ltdldir
+	repl_uscore=`$ECHO "$repl" | $SED 's,[/.+-],_,g'`
+	my_fixup_inc_paths_script="\
+	  s,libltdl_,@repl_uscore@_,
+	  s,libltdl/,@repl@/,
+	  s,: libltdl/,: @repl@/,
+	  s, -Ilibltdl , -I@repl@ ,
+	  s,\\\$(libltdl_,\$(@repl_uscore@_,
+	  s,)/libltdl ,)/@repl@ ,
+	  s,@repl_uscore@,${repl_uscore},g
+	  s,@repl@,${repl},g"
+	;;
+    esac
+
+    $RM "$my_destdir/$my_filename" 2>/dev/null
+    $opt_quiet || func_echo "creating file \`$my_destdir/$my_filename'"
+    if $opt_dry_run; then :;
+    else
+      $SED "$my_fixup_non_subpackage_script
+	    $my_fixup_inc_paths_script" \
+	< "$my_srcdir/$my_filename" > "$my_destdir/$my_filename" ||
+	func_fatal_error "cannot create $my_destdir/$my_filename"
+    fi
+}
+
+# func_scan_files
+# Scan configure.(ac|in) and aclocal.m4 (if present) for use of libltdl
+# and libtool.  Possibly running some of these tools if necessary.
+# Libtoolize affects the contents of aclocal.m4, and should be run before
+# aclocal, so we can't use configure --trace which relies on a consistent
+# configure.(ac|in) and aclocal.m4.
+func_scan_files ()
+{
+    $opt_debug
+    # Prefer configure.ac to configure.in
+    test -f configure.ac && configure_ac=configure.ac
+    test -f "$configure_ac" || configure_ac=
+
+    # Set local variables to reflect contents of configure.ac
+    my_sed_scan_configure_ac='s,#.*$,,; s,^dnl .*$,,; s, dnl .*$,,;
+	/AC_INIT/ {
+	    s,^.*$,seen_autoconf=:,
+	    p
+	}
+	d'
+    test -z "$configure_ac" \
+        || eval `$SED "$my_sed_scan_configure_ac" "$configure_ac"`
+
+    $seen_autoconf || {
+	my_configure_ac=
+	test -n "$configure_ac" && my_configure_ac="$configure_ac: "
+        func_verbose "${my_configure_ac}not using Autoconf"
+
+	# Make sure ltdldir and ltdl_mode have sensible defaults
+        # since we return early here:
+	test -n "$ltdldir" || ltdldir=libltdl
+	test -n "$ltdl_mode" || ltdl_mode=subproject
+
+	return
+    }
+
+    # ---------------------------------------------------- #
+    # Probe macro usage in configure.ac and/or aclocal.m4. #
+    # ---------------------------------------------------- #
+
+    my_sed_traces='s,#.*$,,; s,^dnl .*$,,; s, dnl .*$,,
+        s,^.*AC_REQUIRE(.*$,,; s,^.*m4_require(.*$,,;
+	s,^.*m4_define(.*$,,
+	s,^.*A[CU]_DEFUN(.*$,,; s,^.*m4_defun(.*$,,
+	/AC_CONFIG_AUX_DIR(/ {
+	    s,^.*AC_CONFIG_AUX_DIR([[	 ]*\([^])]*\).*$,ac_auxdir=\1,
+	    p
+        }
+	/AC_CONFIG_MACRO_DIR(/ {
+	    s,^.*AC_CONFIG_MACRO_DIR([[	 ]*\([^])]*\).*$,ac_macrodir=\1,
+	    p
+        }
+	/_LT_CONFIG_LTDL_DIR(/d
+	/LT_CONFIG_LTDL_DIR(/ {
+	    s,^.*LT_CONFIG_LTDL_DIR([[	 ]*\([^])]*\).*$,ac_ltdldir=\1,
+	    p
+	}
+	/\[A[CM]_PROG_LIBTOOL/d
+	/A[CM]_PROG_LIBTOOL/ {
+	    s,^.*$,seen_libtool=:,
+	    p
+	}
+	/the.*option into.*LT_INIT.*parameter/d
+	/\[LT_INIT/d
+	/LT_INIT/		 {
+	    s,^.*$,seen_libtool=:,
+	    p
+	}
+	/\[LTDL_INIT/d
+	/LTDL_INIT/          {
+	    s,^.*LTDL_INIT([[	 ]*\([^])]*\).*$,ltdl_options="\1",
+	    s,^.*LTDL_INIT[	 ]*$,seen_ltdl=:,
+	    p
+	}
+	/LT_WITH_LTDL/       {
+	    s,^.*$,seen_ltdl=:,
+	    p
+	}
+	/AC_LIB_LTDL/        {
+	    s,^.*$,seen_ltdl=:,
+	    p
+	}
+	/AC_WITH_LTDL/       {
+	    s,^.*$,seen_ltdl=:,
+	    p
+	}
+	d'
+    eval `cat aclocal.m4 "$configure_ac" 2>/dev/null | $SED "$my_sed_traces"`
+
+
+    # ----------------- #
+    # Validate ltdldir. #
+    # ----------------- #
+
+    ac_ltdldir=`$ECHO "$ac_ltdldir" | $SED 's,/*$,,'`
+
+    # If $configure_ac contains AC_CONFIG_LTDL_DIR, check that its
+    # arguments were not given in terms of a shell variable!
+    case "$ac_ltdldir" in
+      *\$*)
+        func_fatal_error "can not handle variables in LT_CONFIG_LTDL_DIR"
+        ;;
+    esac
+
+    # If neither --ltdl nor LT_CONFIG_LTDL_DIR are specified, default to
+    # `libltdl'.  If both are specified, they must be the same.  Otherwise,
+    # take the one that is given! (If LT_CONFIG_LTDL_DIR is not specified
+    # we suggest adding it later in this code.)
+    case x$ac_ltdldir,x$ltdldir in
+      x,x)	ltdldir=libltdl		;;
+      x*,x)	ltdldir=$ac_ltdldir	;;
+      x,x*)	ltdldir=$ltdldir	;;
+      *)
+        test x"$ac_ltdldir" = x"$ltdldir" || \
+	    func_fatal_error "--ltdl='$ltdldir' does not match LT_CONFIG_LTDL_DIR($ac_ltdldir)"
+	;;
+    esac
+
+
+    # ------------------- #
+    # Validate ltdl_mode. #
+    # ------------------- #
+
+    test -n "$ltdl_options" && seen_ltdl=:
+
+    # If $configure_ac contains LTDL_INIT, check that its
+    # arguments were not given in terms of a shell variable!
+    case "$ltdl_options" in
+      *\$*)
+        func_fatal_error "can not handle variables in LTDL_INIT"
+        ;;
+    esac
+
+    # Extract mode name from ltdl_options
+    # FIXME: Diagnose multiple conflicting modes in ltdl_options
+    ac_ltdl_mode=
+    case " $ltdl_options " in
+      *" nonrecursive "*)  ac_ltdl_mode=nonrecursive	;;
+      *" recursive "*)     ac_ltdl_mode=recursive	;;
+      *" subproject "*)    ac_ltdl_mode=subproject	;;
+    esac
+
+    # If neither --ltdl nor an LTDL_INIT mode are specified, default to
+    # `subproject'.  If both are specified, they must be the same.  Otherwise,
+    # take the one that is given!
+    case x$ac_ltdl_mode,x$ltdl_mode in
+      x,x)	ltdl_mode=subproject	;;
+      x*,x)	ltdl_mode=$ac_ltdl_mode	;;
+      x,x*)	ltdl_mode=$ltdl_mode	;;
+      *)
+        test x"$ac_ltdl_mode" = x"$ltdl_mode" || \
+	    func_fatal_error "--$ltdl_mode does not match LTDL_INIT($ac_ltdl_mode)"
+	;;
+    esac
+
+    # ---------------- #
+    # Validate auxdir. #
+    # ---------------- #
+
+    if test -n "$ac_auxdir"; then
+      # If $configure_ac contains AC_CONFIG_AUX_DIR, check that it was
+      # not given in terms of a shell variable!
+      case "$ac_auxdir" in
+      *\$*)
+        func_fatal_error "can not handle variables in AC_CONFIG_AUX_DIR"
+        ;;
+      *)
+	auxdir=$ac_auxdir
+	;;
+      esac
+    else
+      # Try to discover auxdir the same way it is discovered by configure.
+      # Note that we default to the current directory.
+      for dir in . .. ../..; do
+        if test -f "$dir/install-sh"; then
+          auxdir=$dir
+          break
+        elif test -f "$dir/install.sh"; then
+          auxdir="$dir"
+          break
+        fi
+      done
+    fi
+
+    # Just use the current directory if all else fails.
+    test -n "$auxdir" || auxdir=.
+
+
+    # ------------------------------ #
+    # Find local m4 macro directory. #
+    # ------------------------------ #
+
+    # Hunt for ACLOCAL_AMFLAGS in `Makefile.am' for a `-I' argument.
+
+    my_sed_aclocal_flags='
+        /^[	 ]*ACLOCAL_[A-Z_]*FLAGS[	 ]*=[	 ]*/ {
+	    s,,,
+	    q
+	}
+	d'
+    if test -f Makefile.am; then
+      my_macrodir_is_next=false
+      for arg in `$SED "$my_sed_aclocal_flags" Makefile.am`; do
+        if $my_macrodir_is_next; then
+          am_macrodir="$arg"
+          break
+        else
+	  case $arg in
+	    -I) my_macrodir_is_next=: ;;
+	    -I*)
+	      am_macrodir=`$ECHO "$arg" | sed 's,^-I,,'`
+	      break
+	      ;;
+	    *) my_macrodir_is_next=false ;;
+	  esac
+        fi
+      done
+    fi
+
+    macrodir="$ac_macrodir"
+    test -z "$macrodir" && macrodir="$am_macrodir"
+
+    if test -n "$am_macrodir" && test -n "$ac_macrodir"; then
+      test "$am_macrodir" = "$ac_macrodir" \
+        || func_fatal_error "AC_CONFIG_MACRO_DIR([$ac_macrodir]) conflicts with ACLOCAL_AMFLAGS=-I $am_macrodir."
+    fi
+}
+
+# func_included_files searchfile
+# Output INCLUDEFILE if SEARCHFILE m4_includes it, else output SEARCHFILE.
+func_included_files ()
+{
+    $opt_debug
+    my_searchfile="$1"
+
+    my_include_regex=
+    my_sed_include='
+        /^m4_include(\[.*\])$/ {
+	    s,^m4_include(\[\(.*\)\])$,\1,
+	    p
+	}
+        d'
+
+    if test -f "$my_searchfile"; then
+      $ECHO "$my_searchfile"
+
+      # Only recurse when we don't care if all the variables we use get
+      # trashed, since they are in global scope.
+      for my_filename in `$SED "$my_sed_include" "$my_searchfile"`; do
+	func_included_files $my_filename
+      done
+    fi
+}
+
+
+# func_serial filename [macro_regex]
+# Output the value of the serial number comment in FILENAME, where the
+# comment line must also match MACRO_REGEX, if given.
+func_serial ()
+{
+    $opt_debug
+    my_filename="$1"
+    my_macro_regex="$2"
+    my_sed_serial='
+	/^# serial [1-9][0-9.]*[	 ]*'"$my_macro_regex"'[	 ]*$/ {
+	    s,^# serial \([1-9][0-9.]*\).*$,\1,
+	    q
+	}
+	d'
+
+    # Search FILENAME and all the files it m4_includes for a serial number
+    # in the file that AC_DEFUNs MACRO_REGEX.
+    my_serial=
+    func_dirname_and_basename "$my_filename"
+    my_filebase=$func_basename_result
+    for my_file in `func_included_files "$my_filename"`; do
+      if test -z "$my_macro_regex" ||
+         test "$my_filename" = aclocal.m4 ||
+         test "X$my_macro_regex" = "X$my_filebase" ||
+         func_grep '^AC_DEFUN(\['"$my_macro_regex" "$my_file"
+      then
+        my_serial=`$SED -e "$my_sed_serial" "$my_file"`
+	break
+      fi
+    done
+
+    # If the file has no serial number, we assume it's ancient.
+    test -n "$my_serial" || my_serial=0
+
+    $ECHO "$my_serial"
+}
+
+
+# func_serial_max serial1 serial2
+# Compare (possibly multi-part, '.' delimited) serial numbers, and
+# return the largest in $func_serial_max_result.  If they are the
+# same, func_serial_max_result will be empty.
+func_serial_max ()
+{
+    $opt_debug
+    my_serial1="$1"
+    my_serial2="$2"
+
+    my_sed_dot='s/\..*$//g'
+    my_sed_rest='s/^[0-9][1-9]*\.*//'
+    my_sed_digits='s/[^0-9.]//g'
+
+    # Incase they turn out to be the same, we'll set it to empty
+    func_serial_max_result=
+
+    test "X$1$2" = X`$ECHO "$1$2" | $SED "$my_sed_digits"` || {
+      func_error "serial numbers \`$1' or \`$2' contain non-digit chars"
+      return
+    }
+
+    while test -n "$my_serial1$my_serial2"; do
+      my_serial1_part=`$ECHO "$my_serial1" | $SED "$my_sed_dot"`
+      my_serial2_part=`$ECHO "$my_serial2" | $SED "$my_sed_dot"`
+
+      test -z "$my_serial1_part$my_serial2_part" \
+        && break
+
+      test -z "$my_serial1_part" \
+        && { func_serial_max_result="$2"; break; }
+
+      test -z "$my_serial2_part" \
+        && { func_serial_max_result="$1"; break; }
+
+      test "$my_serial1_part" -gt "$my_serial2_part" \
+        && { func_serial_max_result="$1"; break; }
+
+      test "$my_serial2_part" -gt "$my_serial1_part" \
+        && { func_serial_max_result="$2"; break; }
+
+      my_serial1=`$ECHO "$my_serial1" | $SED "$my_sed_rest"`
+      my_serial2=`$ECHO "$my_serial2" | $SED "$my_sed_rest"`
+    done
+}
+
+
+# func_serial_update_check srcfile src_serial destfile dest_serial
+# Unless SRC_SERIAL is newer than DEST_SERIAL set $func_serial_update_check
+# to 'false'.
+func_serial_update_check ()
+{
+    $opt_debug
+    my_srcfile="$1"
+    my_src_serial="$2"
+    my_destfile="$3"
+    my_dest_serial="$4"
+    my_update_p=:
+
+    if test -f "$my_destfile"; then
+      test "X$my_src_serial" = "X0" && {
+        func_warning "no serial number on \`$my_srcfile', not copying."
+	return
+      }
+
+      # Determine whether the destination has an older serial.
+      func_serial_max "$my_src_serial" "$my_dest_serial"
+      test "X$my_src_serial" = "X$func_serial_max_result" || my_update_p=false
+
+      test "X$my_src_serial" = "X$func_serial_max_result" \
+        && func_verbose "\`$my_srcfile' is serial $my_src_serial, greater than $my_dest_serial in \`$my_destfile'"
+
+      if test "X$my_dest_serial" = "X$func_serial_max_result"; then
+        func_verbose "\`$my_srcfile' is serial $my_src_serial, less than $my_dest_serial in \`$my_destfile'"
+	$opt_force || if test -n "$ac_macrodir$ac_ltdldir"; then
+           func_error "\`$my_destfile' is newer: use \`--force' to overwrite"
+        fi
+      fi
+    fi
+
+    func_serial_update_check_result="$my_update_p"
+}
+
+
+# func_aclocal_update_check filename
+# Unless serial number of FILENAME is newer than the matching serial number
+# in aclocal.m4, set $func_aclocal_update_check to 'false'.
+func_aclocal_update_check ()
+{
+    $opt_debug
+    my_srcfile="$aclocaldir/$1"
+    my_destfile="aclocal.m4"
+
+    case $need in
+      libtool.m4)
+	my_src_serial=`func_serial "$my_srcfile" LT_INIT`
+	my_dest_serial=`func_serial "$my_destfile" LT_INIT`
+
+	# Strictly, this libtoolize ought not to have to deal with ancient
+	# serial formats, but we accept them here to be complete:
+	test "X$my_src_serial" = "X0" &&
+	  my_src_serial=`func_serial "$my_srcfile" 'A[CM]_PROG_LIBTOOL'`
+	test "X$my_dest_serial" = "X0" &&
+	  my_dest_serial=`func_serial "$my_destfile" 'A[CM]_PROG_LIBTOOL'`
+	;;
+      ltdl.m4)
+	my_src_serial=`func_serial "$my_srcfile" LTDL_INIT`
+	my_dest_serial=`func_serial "$my_destfile" LTDL_INIT`
+	;;
+      *)
+	my_src_serial=`func_serial "$my_srcfile" "$need"`
+	my_dest_serial=`func_serial "$my_destfile" "$need"`
+	;;
+    esac
+
+    func_serial_update_check \
+      "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
+
+    func_aclocal_update_check_result="$func_serial_update_check_result"
+}
+
+
+# func_serial_update filename srcdir destdir [msg_var] [macro_re] [old_macro_re]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer serial number, or DESTFILE does not yet exist, or the user
+# specified `--force' at the command line.  If given, MACRO_REGEX or
+# OLD_MACRO_REGEX must match any text after "# serial N" in both files.
+func_serial_update ()
+{
+    $opt_debug
+    my_filename="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_msg_var="$4"
+    my_macro_regex="$5"
+    my_old_macro_regex="$6"
+
+    my_serial_update_p=:
+    my_return_status=1
+    my_srcfile="$my_srcdir/$my_filename"
+    my_destfile="$my_destdir/$my_filename"
+
+    test -f "$my_srcfile" || func_fatal_error "\`$my_srcfile' does not exist."
+
+    if test -f "$my_destfile"; then
+      my_src_serial=`func_serial "$my_srcfile" "$my_macro_regex"`
+      my_dest_serial=`func_serial "$my_destfile" "$my_macro_regex"`
+
+      # Strictly, this libtoolize ought not to have to deal with ancient
+      # serial formats, but we accept them here to be complete:
+      test "X$my_src_serial" = "X0" &&
+        my_src_serial=`func_serial "$my_srcfile" "$my_old_macro_regex"`
+
+      test "X$my_dest_serial" = "X0" &&
+        my_dest_serial=`func_serial "$my_destfile" "$my_old_macro_regex"`
+
+      func_serial_update_check \
+        "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
+      my_serial_update_p="$func_serial_update_check_result"
+    fi
+
+    if $my_serial_update_p || $opt_force; then
+      func_copy "$my_srcfile" "$my_destfile" "$my_msg_var"
+      my_return_status=$?
+    elif $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
+      $opt_quiet || func_echo_once "$my_msg_var"
+      $opt_quiet \
+        || func_echo "\`$my_destfile' is already up to date."
+    fi
+
+    # Do this after the copy for hand maintained `aclocal.m4', incase
+    # it has `m4_include([DESTFILE])', so the copy effectively already
+    # updated `aclocal.m4'.
+    my_included_files=`func_included_files aclocal.m4`
+    case `echo " $my_included_files " | $NL2SP` in
+
+      # Skip included files:
+      *" $my_destfile "*) ;;
+
+      # Otherwise compare to aclocal.m4 serial number (func_serial
+      # returns 0 for older macro serial numbers before we provided
+      # serial tags, so the update message will be correctly given
+      # if aclocal.m4 contains an untagged --i.e older-- macro file):
+      *)
+        if test -f aclocal.m4; then
+          func_serial_max \
+              "$my_src_serial" `func_serial aclocal.m4 "$my_macro_regex"`
+          if test "X$my_src_serial" = "X$func_serial_max_result"; then
+              func_echo_once "$my_msg_var"
+	      func_echo "You should add the contents of \`$my_destfile' to \`aclocal.m4'."
+          fi
+        fi
+        ;;
+    esac
+    return $my_return_status
+}
+
+
+# func_keyword_update filename srcdir destdir sed_script [msg_var]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer revision according to the serial number extracted by
+# SED_SCRIPT, or DESTFILE does not yet exist, or the user specified
+# `--force' at the command line.
+func_keyword_update ()
+{
+    $opt_debug
+    my_filename="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_sed_script="$4"
+    my_msg_var="$5"
+
+    my_srcfile="$my_srcdir/$my_filename"
+    my_destfile="$my_destdir/$my_filename"
+
+    my_keyword_update_p=:
+
+    test -f "$my_srcfile" || func_fatal_error "\`$my_srcfile' does not exist."
+
+    if test -f "$my_destfile"; then
+      my_src_serial=`$SED -e "$my_sed_script" "$my_srcfile"`
+      test -z "$my_src_serial" && {
+        func_warning "no serial number in \`$my_srcfile', not copying."
+	return
+      }
+
+      my_dest_serial=`$SED -e "$my_sed_script" "$my_destfile"`
+      test -n "$my_dest_serial" || my_dest_serial=0
+
+      func_serial_update_check \
+         "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
+      my_keyword_update_p="$func_serial_update_check_result"
+    fi
+
+    if $my_keyword_update_p || $opt_force; then
+      func_copy "$my_srcfile" "$my_destfile" "$my_msg_var"
+    elif $opt_verbose || $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
+      func_echo_once "$my_msg_var"
+      func_echo "\`$my_destfile' is already up to date."
+    fi
+}
+
+
+# func_ltmain_update filename srcdir destdir [msg_var]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer revision, or DESTFILE does not yet exist, or the user
+# specified `--force' at the command line.
+func_ltmain_update ()
+{
+    $opt_debug
+    my_sed_ltmain='
+	/^package_revision='\''*[0-9][1-9.]*'\''*/ {
+	    s,^package_revision='\''*\([0-9.]*\)'\''*[	 ]*$,\1,
+	    p
+	}
+	d'
+
+    func_keyword_update "$1" "$2" "$3" "$my_sed_ltmain" "$4"
+
+    return $my_return_status
+}
+
+
+# func_config_update filename srcdir destdir [msg_var]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer timestamp, or DESTFILE does not yet exist, or the user
+# specified `--force' at the command line.
+func_config_update ()
+{
+    $opt_debug
+    my_sed_config='
+	/^timestamp='\''*[0-9][1-9-]*'\''*/ {
+	    s,^timestamp='\''*\([0-9-]*\)'\''*,\1,
+	    s/-/./g
+	    p
+	}
+	d'
+
+    func_keyword_update "$1" "$2" "$3" "$my_sed_config" "$4"
+
+    return $my_return_status
+}
+
+
+# func_install_update filename srcdir destdir [msg_var]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer timestamp, or DESTFILE does not yet exist, or the user
+# specified `--force' at the command line.
+func_install_update ()
+{
+    $opt_debug
+    my_sed_install='
+	/^scriptversion='\''*[0-9][1-9.-]*'\''*/ {
+	    s,[#;].*,,
+	    s,^scriptversion='\''*\([0-9.-]*\)'\''*,\1,
+	    s/-/./g
+	    p
+	}
+	d'
+
+    func_keyword_update "$1" "$2" "$3" "$my_sed_install" "$4"
+
+    return $my_return_status
+}
+
+
+# func_massage_aclocal_DATA [glob_exclude]
+# @aclocal_DATA\@ is substituted as per its value in Makefile.am;
+# this function massages it into a suitable format for func_copy_some_files.
+func_massage_aclocal_DATA ()
+{
+    $opt_debug
+    pkgmacro_files=     # GLOBAL VAR
+
+    my_glob_exclude="$1"
+
+    # Massage a value for pkgmacro_files from the value used in Makefile.am.
+    for my_filename in @aclocal_DATA@; do
+      func_dirname_and_basename "$my_filename"
+      my_filename=$func_basename_result
+
+      # ignore excluded filenames
+      if test -n "$my_glob_exclude"; then
+	my_cont=false
+	eval 'case $my_filename in '$my_glob_exclude') my_cont=: ;; esac'
+	$my_cont && continue
+      fi
+
+      pkgmacro_files="$pkgmacro_files:$my_filename"
+    done
+
+    # strip spurious leading `:'
+    pkgmacro_files=`$ECHO "$pkgmacro_files" | $SED 's,^:*,,'`
+}
+
+
+# func_install_pkgmacro_subproject
+# Unless --quiet was passed, display a message. Then copy pkgmacro_files
+# from libtool installation tree to subproject libltdl tree.
+func_install_pkgmacro_subproject ()
+{
+    $opt_debug
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgmacro_files; do
+      test -f "$subproject_macrodir/$file" && func_verbose "rm -f '$subproject_macrodir/$file'"
+      rm -f "$subproject_macrodir/$file"
+    done
+
+    # Copy all the files from installed libltdl to this project, if the
+    # user specified a macrodir.
+    $opt_quiet || if test "x$macrodir" != "x$subproject_macrodir"; then
+      pkgmacro_header="putting macros in \`$subproject_macrodir'."
+    elif test -n "$subproject_macrodir"; then
+      pkgmacro_header="putting macros in AC_CONFIG_MACRO_DIR, \`$subproject_macrodir'."
+    fi
+
+    func_copy_some_files "argz.m4:libtool.m4:ltdl.m4:$pkgmacro_files" \
+      "$aclocaldir" "$subproject_macrodir" pkgmacro_header
+}
+
+
+# func_install_pkgmacro_parent
+# Unless --quiet was passed, or AC_CONFIG_MACRO_DIR was not seen, display
+# a message.  Then update appropriate macros if newer ones are available
+# from the libtool installation tree.
+func_install_pkgmacro_parent ()
+{
+    $opt_debug
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgmacro_files; do
+      test -f "$macrodir/$file" && func_verbose "rm -f '$macrodir/$file'"
+      rm -f "$macrodir/$file"
+    done
+
+    # Copy all the files from installed libltdl to this project, if the
+    # user specified a macrodir.
+    $opt_quiet || if test -n "$ac_macrodir"; then
+      my_pkgmacro_header="putting macros in AC_CONFIG_MACRO_DIR, \`$ac_macrodir'."
+    elif test -n "$macrodir"; then
+      my_pkgmacro_header="putting macros in \`$macrodir'."
+    fi
+
+    if $opt_ltdl; then
+      func_serial_update argz.m4 "$aclocaldir" "$macrodir" \
+        my_pkgmacro_header argz.m4
+    else
+      func_verbose "Not copying \`$macrodir/argz.m4', libltdl not used."
+    fi
+
+    func_serial_update  libtool.m4 "$aclocaldir" "$macrodir" \
+      my_pkgmacro_header LT_INIT 'A[CM]_PROG_LIBTOOL'
+
+    if $opt_ltdl; then
+      func_serial_update ltdl.m4 "$aclocaldir" "$macrodir" \
+        my_pkgmacro_header 'LTDL_INIT'
+    else
+      func_verbose "Not copying \`$macrodir/ltdl.m4', libltdl not used."
+    fi
+
+    my_save_IFS="$IFS"
+    IFS=:
+    for file in $pkgmacro_files; do
+      IFS="$my_save_IFS"
+      func_serial_update "$file" "$aclocaldir" "$macrodir" \
+        my_pkgmacro_header "$file"
+    done
+    IFS="$my_save_IFS"
+}
+
+
+# func_install_pkgmacro_files
+# Install copies of the libtool and libltdl m4 macros into this package.
+func_install_pkgmacro_files ()
+{
+    $opt_debug
+
+    # argz.m4, libtool.m4 and ltdl.m4 are handled specially:
+    func_massage_aclocal_DATA 'argz.m4|libtool.m4|ltdl.m4'
+
+  # 1. Parent has separate macrodir to subproject ltdl:
+    if $opt_ltdl && test "x$ltdl_mode" = "xsubproject" &&
+       test -n "$macrodir" && test "x$macrodir" != "x$subproject_macrodir"
+    then
+      func_install_pkgmacro_parent
+      func_install_pkgmacro_subproject
+
+  # 2. Parent shares macrodir with subproject ltdl:
+    elif $opt_ltdl && test "x$ltdl_mode" = "xsubproject"
+       # && test "x$macrodir" = "x$subproject_macrodir"
+    then
+      func_install_pkgmacro_subproject
+
+  # 3. Not a subproject, but macrodir was specified in parent:
+    elif test -n "$macrodir"; then
+      func_install_pkgmacro_parent
+
+  # 4. AC_CONFIG_MACRO_DIR was not specified:
+    else
+      func_verbose "AC_CONFIG_MACRO_DIR not defined, not copying libtool macros."
+    fi
+}
+
+
+# func_massage_pkgltdl_files [glob_exclude]
+# @pkgltdl_files\@ is substituted as per its value in Makefile.am; this
+# function massages it into a suitable format for func_copy_some_files.
+func_massage_pkgltdl_files ()
+{
+    $opt_debug
+    pkgltdl_files=	# GLOBAL VAR
+
+    my_glob_exclude="$1"
+
+    # Massage a value for pkgltdl_files from the value used in Makefile.am
+    for my_filename in @pkgltdl_files@; do
+
+      # Strip surplus leading 'libltdl/':
+      my_filename=`expr "X$my_filename" : 'Xlibltdl/\(.*\)'`
+
+      # ignore excluded filenames
+      if test -n "$my_glob_exclude"; then
+	my_cont=false
+	eval 'case $my_filename in '$my_glob_exclude') my_cont=: ;; esac'
+	$my_cont && continue
+      fi
+
+      # ignore duplicates
+      case :$pkgltdl_files: in
+        *:$my_filename:*) ;;
+	*) pkgltdl_files="$pkgltdl_files:$my_filename" ;;
+      esac
+    done
+
+    # strip spurious leading `:'
+    pkgltdl_files=`$ECHO "$pkgltdl_files" | $SED 's,^:*,,'`
+}
+
+
+# func_install_pkgltdl_files
+# Install copies of the libltdl files into this package.  Any auxiliary
+# or m4 macro files needed in the libltdl tree will also be copied by
+# func_install_pkgconfig_files and func_install_pkgmacro_files resp.
+func_install_pkgltdl_files ()
+{
+    $opt_debug
+    $opt_ltdl || return
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgltdl_files; do
+      test -f "$ltdldir/$file" && func_verbose "rm -f '$ltdldir/$file'"
+      rm -f "$ltdldir/$file"
+    done
+
+    # Copy all the files from installed libltdl to this project, if the
+    # user specified `--ltdl'.
+    $opt_quiet || if test -n "$ac_ltdldir"; then
+      pkgltdl_header="putting libltdl files in LT_CONFIG_LTDL_DIR, \`$ac_ltdldir'."
+    elif test -n "$ltdldir"; then
+      pkgltdl_header="putting libltdl files in \`$ltdldir'."
+    fi
+
+    # These files are handled specially, depending on ltdl_mode:
+    if test "x$ltdl_mode" = "xsubproject"; then
+      func_massage_pkgltdl_files 'Makefile.inc'
+    else
+      func_massage_pkgltdl_files 'Makefile.am|Makefile.in*|aclocal.m4|config*'
+    fi
+
+    func_copy_some_files "$pkgltdl_files" \
+      "$pkgltdldir/libltdl" "$ltdldir" pkgltdl_header
+
+    # For recursive ltdl modes, copy a suitable Makefile.{am,inc}:
+    case $ltdl_mode in
+      recursive)
+        func_fixup_Makefile "Makefile.am" "$pkgltdldir/libltdl" "$ltdldir"
+        ;;
+      nonrecursive)
+        func_fixup_Makefile "Makefile.inc" "$pkgltdldir/libltdl" "$ltdldir"
+        ;;
+    esac
+}
+
+
+# func_massage_pkgconfig_files [glob_exclude]
+# @pkgconfig_files\@ is substituted as per its value in Makefile.am; this
+# function massages it into a suitable format for func_copy_some_files.
+func_massage_pkgconfig_files ()
+{
+    $opt_debug
+    pkgconfig_files=	# GLOBAL VAR
+
+    my_glob_exclude="$1"
+
+    # Massage a value for pkgconfig_files from the value used in Makefile.am
+    for my_filename in @pkgconfig_files@; do
+
+      # ignore excluded filenames
+      if test -n "$my_glob_exclude"; then
+	my_cont=false
+	eval 'case $my_filename in '$my_glob_exclude') my_cont=: ;; esac'
+	$my_cont && continue
+      fi
+
+      # ignore duplicates
+      case :$pkgconfig_files: in
+        *:$my_filename:*) ;;
+	*) pkgconfig_files="$pkgconfig_files:$my_filename" ;;
+      esac
+    done
+
+    # strip spurious leading `:'
+    pkgconfig_files=`$ECHO "$pkgconfig_files" | $SED 's,^:*,,'`
+}
+
+
+# func_install_pkgconfig_subproject
+# Unless --quiet was passed, display a message. Then copy pkgconfig_files
+# from libtool installation tree to subproject libltdl tree.
+func_install_pkgconfig_subproject ()
+{
+    $opt_debug
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgconfig_files; do
+      test -f "$subproject_auxdir/$file" && func_verbose "rm -f '$subproject_auxdir/$file'"
+      rm -f "$subproject_auxdir/$file"
+    done
+
+    # Copy all the files from installed libltdl to this project, if the
+    # user specified an auxdir.
+    $opt_quiet || if test "x$ac_auxdir" = "x$subproject_auxdir"; then
+      pkgconfig_header="putting auxiliary files in AC_CONFIG_AUX_DIR, \`$subproject_auxdir'."
+    elif test -n "$auxdir"; then
+      pkgconfig_header="putting auxiliary files in \`$auxdir'."
+    fi
+
+    func_copy_some_files "$pkgconfig_files" \
+      "$pkgdatadir" "$ltdldir" pkgconfig_header
+}
+
+
+# func_install_pkgconfig_parent
+# Unless --quiet was passed, or AC_CONFIG_AUX_DIR was not seen, display a
+# message.  Then update appropriate auxiliary files if newer ones are
+# available from the libtool installation tree.
+func_install_pkgconfig_parent ()
+{
+    $opt_debug
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgconfig_files; do
+      test -f "$auxdir/$file" && func_verbose "rm -f '$auxdir/$file'"
+      rm -f "$auxdir/$file"
+    done
+
+    if test -n "$ac_auxdir"; then
+      pkgconfig_header="putting auxiliary files in AC_CONFIG_AUX_DIR, \`$ac_auxdir'."
+    elif test -n "$auxdir" || test "x$ltdldir" = "x."; then
+      pkgconfig_header="putting auxiliary files in \`$auxdir'."
+    fi
+
+    if $opt_install; then
+      func_config_update config.guess \
+        "$pkgdatadir/config" "$auxdir" pkgconfig_header
+      func_config_update config.sub \
+        "$pkgdatadir/config" "$auxdir" pkgconfig_header
+      func_install_update install-sh \
+        "$pkgdatadir/config" "$auxdir" pkgconfig_header
+    fi
+    func_ltmain_update ltmain.sh \
+      "$pkgdatadir/config" "$auxdir" pkgconfig_header
+}
+
+
+# func_install_pkgconfig_files
+# Install copies of the auxiliary files into this package according to
+# the whether libltdl is included as a subproject, and whether the parent
+# shares the AC_CONFIG_AUX_DIR setting.
+func_install_pkgconfig_files ()
+{
+    $opt_debug
+    func_massage_pkgconfig_files
+
+  # 1. Parent shares auxdir with subproject ltdl:
+    if $opt_ltdl && test "x$ltdl_mode" = "xsubproject" &&
+       test "x$ac_auxdir" = "x$subproject_auxdir"
+    then
+      func_install_pkgconfig_subproject
+
+  # 2. Parent has separate auxdir to subproject ltdl:
+    elif $opt_ltdl && test "x$ltdl_mode" = "xsubproject"
+       # && test "x$auxdir" != "x$subproject_auxdir" is implied
+    then
+      if $seen_autoconf; then
+	func_install_pkgconfig_parent
+      fi
+      func_install_pkgconfig_subproject
+
+  # 3. Not subproject, but AC_CONFIG_AUX_DIR was used in parent:
+    elif test -n "$ac_auxdir" || test "x$auxdir" = "x."; then
+      func_install_pkgconfig_parent
+
+  # 4. AC_CONFIG_AUX_DIR was not specified:
+    else
+      func_verbose "AC_CONFIG_AUX_DIR not defined, not copying libtool auxiliary files."
+    fi
+}
+
+
+# func_nonemptydir_p dirvar
+# DIRVAR is the name of a variable to evaluate.  Unless DIRVAR names
+# a directory that exists and is non-empty abort with a diagnostic.
+func_nonemptydir_p ()
+{
+    $opt_debug
+    my_dirvar="$1"
+    my_dir=`eval echo "\\\$$my_dirvar"`
+
+    # Is it a directory at all?
+    test -d "$my_dir" \
+      || func_fatal_error "\$$my_dirvar is not a directory: \`$my_dir'"
+
+    # check that the directories contents can be ls'ed
+    test -n "`{ cd $my_dir && ls; } 2>/dev/null`" \
+        || func_fatal_error "can not list files: \`$my_dir'"
+}
+
+
+# func_check_macros
+# Sanity check macros from aclocal.m4 against installed versions.
+func_check_macros ()
+{
+    $opt_debug
+    $opt_quiet && return
+    $seen_autoconf || return
+
+    ac_config_macro_dir_advised=false
+
+    if test -n "$ac_macrodir$ltdldir" && test -z "$macrodir"; then
+      my_ac_config_macro_srcdir="$aclocaldir"
+      if $opt_ltdl && test "$macrodir" != "$subproject_macrodir"; then
+	my_ac_config_macro_srcdir="$subproject_macrodir"
+      fi
+
+      my_needed="libtool.m4 ltoptions.m4 ltversion.m4 ltsugar.m4 lt~obsolete.m4"
+      $opt_ltdl && my_needed="$my_needed argz.m4 ltdl.m4"
+
+      if test -f "aclocal.m4"; then
+	for need in $my_needed; do
+	  func_aclocal_update_check $need
+	  $func_aclocal_update_check_result && my_missing="$my_missing $need"
+	done
+      else
+        my_missing="$my_needed"
+      fi
+
+      if test -n "$my_missing"; then
+        func_echo "You should add the contents of the following files to \`aclocal.m4':"
+        for need in $my_missing; do
+	  func_echo "  \`$my_ac_config_macro_srcdir/$need'"
+        done
+
+        if test "$my_ac_config_macro_srcdir" != "$aclocaldir"; then
+          func_echo "or else add \`AC_CONFIG_MACRO_DIR([$subproject_macrodir])' to $configure_ac."
+	  ac_config_macro_dir_advised=:
+        fi
+      fi
+    fi
+
+    ## ---------------------------------------------------------- ##
+    ## Since we return early here when --no-warn was given:       ##
+    ## DO NOT PUT ANYTHING BUT UPGRADE ADVICE MESSAGES BELOW HERE ##
+    ## ---------------------------------------------------------- ##
+
+    $opt_warning || return
+
+    $seen_libtool ||
+      func_echo "Remember to add \`LT_INIT' to $configure_ac."
+
+    # Suggest using LTDL_INIT if appropriate:
+    $opt_ltdl && if test x$seen_ltdl != x:; then
+      case $ltdl_mode in
+	subproject) ltdl_init_args=""               ;;
+	*)          ltdl_init_args="([$ltdl_mode])" ;;
+      esac
+      func_echo "Remember to add \`LTDL_INIT$ltdl_init_args' to $configure_ac."
+    fi
+
+    if $opt_ltdl; then
+      # Remind the user to call LT_CONFIG_LTDL_DIR:
+      test -n "$ac_ltdldir" ||
+        func_echo "Remember to add \`LT_CONFIG_LTDL_DIR([$ltdldir])' to \`$configure_ac'."
+
+      # For subproject mode, offer some suggestions for avoiding duplicate
+      # files in a project that uses libltdl:
+      if test "x$ltdl_mode" = "xsubproject"; then
+        test "$subproject_auxdir" = "$auxdir" ||
+          func_echo "Consider using \`AC_CONFIG_AUX_DIR([$subproject_auxdir])' in $configure_ac."
+        $ac_config_macro_dir_advised || test "$subproject_macrodir" = "$macrodir" ||
+          func_echo "Consider using \`AC_CONFIG_MACRO_DIR([$subproject_macrodir])' in $configure_ac."
+	ac_config_macro_dir_advised=:
+      fi
+    fi
+
+    # Suggest modern idioms for storing autoconf macros:
+    $ac_config_macro_dir_advised || if test -z "$ac_macrodir" || test x"$macrodir" = x.; then
+      func_echo "Consider adding \`AC_CONFIG_MACRO_DIR([m4])' to $configure_ac and"
+      func_echo "rerunning $progname, to keep the correct libtool macros in-tree."
+      ac_config_macro_dir_advised=:
+
+    elif test -z "$ac_macrodir$ltdldir"; then
+      func_echo "Consider adding \`AC_CONFIG_MACRO_DIR([$macrodir])' to $configure_ac,"
+      func_echo "and rerunning $progname and aclocal."
+      ac_config_macro_dir_advised=:
+    fi
+
+    if test -z "$am_macrodir$macrodir"; then
+      func_echo "Consider adding \`-I m4' to ACLOCAL_AMFLAGS in Makefile.am."
+
+    elif test -z "$am_macrodir"; then
+      if $opt_ltdl && test "x$ltdl_mode" = "xsubproject" && test "$subproject_macrodir" != "$macrodir"; then
+	func_echo "Consider adding \`-I $subproject_macrodir' to ACLOCAL_AMFLAGS in Makefile.am."
+      else
+        func_echo "Consider adding \`-I $macrodir' to ACLOCAL_AMFLAGS in Makefile.am."
+      fi
+    fi
+
+    # Don't trace for this, we're just checking the user didn't invoke it
+    # directly from configure.ac.
+    $SED 's,dnl .*$,,; s,# .*$,,' "$configure_ac" | grep AC_PROG_RANLIB >/dev/null &&
+      func_echo "\`AC_PROG_RANLIB' is rendered obsolete by \`LT_INIT'"
+
+    # FIXME: Ensure ltmain.sh, libtool.m4 and ltdl.m4 are from the same release
+}
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+{
+  # Lists of all files libtoolize has ever installed.  These are removed
+  # before installing the latest files when --force was passed to help
+  # ensure a clean upgrade.
+  # Do not remove config.guess nor config.sub, we don't install them
+  # without --install, and the project may not be using Automake.
+  all_pkgconfig_files="ltmain.sh"
+  all_pkgmacro_files="argz.m4 libtool.m4 ltdl.m4 ltoptions.m4 ltsugar.m4 ltversion.in ltversion.m4 lt~obsolete.m4"
+  all_pkgltdl_files="COPYING.LIB Makefile Makefile.in Makefile.inc Makefile.am README acinclude.m4 aclocal.m4 argz_.h argz.c config.h.in config-h.in configure configure.ac configure.in libltdl/lt__alloc.h libltdl/lt__dirent.h libltdl/lt__glibc.h libltdl/lt__private.h libltdl/lt__strl.h libltdl/lt_dlloader.h libltdl/lt_error.h libltdl/lt_system.h libltdl/slist.h loaders/dld_link.c loaders/dlopen.c loaders/dyld.c loaders/load_add_on.c loaders/loadlibrary.c loaders/preopen.c loaders/shl_load.c lt__alloc.c lt__dirent.c lt__strl.c lt_dlloader.c lt_error.c ltdl.c ltdl.h slist.c"
+
+  # Locations for important files:
+  prefix=@prefix@
+  datadir=@datadir@
+  pkgdatadir=@pkgdatadir@
+  pkgltdldir=@pkgdatadir@
+  aclocaldir=@aclocaldir@
+  auxdir=
+  macrodir=
+  configure_ac=configure.in
+
+  seen_autoconf=false
+  seen_libtool=false
+  seen_ltdl=false
+
+  # test EBCDIC or ASCII
+  case `echo X|tr X '\101'` in
+   A) # ASCII based system
+      # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+    SP2NL='tr \040 \012'
+    NL2SP='tr \015\012 \040\040'
+    ;;
+   *) # EBCDIC based system
+    SP2NL='tr \100 \n'
+    NL2SP='tr \r\n \100\100'
+    ;;
+  esac
+
+  # Allow the user to override the master libtoolize repository:
+  if test -n "$_lt_pkgdatadir"; then
+    pkgltdldir="$_lt_pkgdatadir"
+    pkgdatadir="$_lt_pkgdatadir/libltdl"
+    aclocaldir="$_lt_pkgdatadir/libltdl/m4"
+  fi
+  func_nonemptydir_p pkgltdldir
+  func_nonemptydir_p pkgdatadir
+  func_nonemptydir_p aclocaldir
+
+  func_scan_files
+
+  case $ltdldir in
+  .) ltdlprefix= ;;
+  *) ltdlprefix=$ltdldir/ ;;
+  esac
+  subproject_auxdir=${ltdlprefix}config
+  subproject_macrodir=${ltdlprefix}m4
+
+  # :::BE CAREFUL HERE:::
+  # func_check_macros needs to check whether --ltdl was specified when
+  # LTDL_INIT was not seen, so we can't just use one variable for both
+  # conditions, or that check will be impossible.   No need to clutter the
+  # rest of the code with '$opt_ltdl || $seen_ltdl' though, because we CAN
+  # safely set opt_ltdl to true if LTDL_INIT was seen:
+  $seen_ltdl && opt_ltdl=:
+
+  func_install_pkgconfig_files
+  func_install_pkgmacro_files
+  func_install_pkgltdl_files
+
+  func_check_macros
+}
+
+exit $exit_status
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+
diff --git a/libtoolize.m4sh b/libtoolize.m4sh
new file mode 100644
index 0000000..cd15c58
--- /dev/null
+++ b/libtoolize.m4sh
@@ -0,0 +1,1521 @@
+m4_pattern_allow([dnl])
+AS_INIT[]m4_divert_push([HEADER-COPYRIGHT])
+# libtoolize (GNU @PACKAGE@@TIMESTAMP@) @VERSION@
+# Written by Gary V. Vaughan <gary@gnu.org>, 2003
+
+# Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
+# Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# Libtoolize is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# Libtoolize is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with libtoolize; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]...
+#
+# Prepare a package to use libtool.
+#
+#   -c, --copy          copy files rather than symlinking them
+#       --debug         enable verbose shell tracing
+#   -n, --dry-run       print commands rather than running them
+#   -f, --force         replace existing files
+#   -i, --install       copy missing auxiliary files
+#       --ltdl[=DIR]    install libltdl sources [default: libltdl]
+#       --no-warn       don't display warning messages
+#       --nonrecursive  prepare ltdl for non-recursive make
+#   -q, --quiet         work silently
+#       --recursive     prepare ltdl for recursive make
+#       --subproject    prepare ltdl to configure and build independently
+#   -v, --verbose       verbosely report processing
+#       --version       print version information and exit
+#   -h, --help          print short or long help message
+#
+# The following space or comma delimited options can be passed to $progname
+# via the environment variable LIBTOOLIZE_OPTIONS, unknown environment
+# options are ignored:
+#
+#   --debug             enable verbose shell tracing
+#   --no-warn           don't display warning messages
+#   --quiet             work silently
+#   --verbose           verbosely report processing
+#
+# You must `cd' to the top directory of your package before you run
+# `$progname'.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#       host-triplet:	@host_triplet@
+#       $progname:	(GNU @PACKAGE@@TIMESTAMP@) @VERSION@
+#       automake:		$automake_version
+#       autoconf:		$autoconf_version
+#
+# Report bugs to <@PACKAGE_BUGREPORT@>.
+# GNU @PACKAGE@ home page: <@PACKAGE_URL@>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+: ${TAR=tar}
+
+PROGRAM=libtoolize
+
+m4_divert_pop
+m4_include([getopt.m4sh])
+
+M4SH_VERBATIM([[
+# ltdl can be installed to be self-contained (subproject, the default);
+# or to be configured by a parent project, either with a recursive or
+# nonrecursive automake driven make:
+ltdl_mode=
+
+# Locations for important files:
+ltdldir=
+
+# Parse environment options
+{
+  my_sed_env_opt='1s/^\([^,:; ]*\).*$/\1/;q'
+  my_sed_env_rest='1s/^[^,:; ]*[,:; ]*\(.*\)$/\1/;q'
+
+  while test -n "$LIBTOOLIZE_OPTIONS"; do
+    opt=`echo "$LIBTOOLIZE_OPTIONS" | sed "$my_sed_env_opt"`
+    LIBTOOLIZE_OPTIONS=`echo "$LIBTOOLIZE_OPTIONS" | sed "$my_sed_env_rest"`
+
+    case $opt in
+      --debug|--no-warn|--quiet|--verbose)
+		envopts="${envopts+$envopts }$opt"			  ;;
+      --*)	env_warning="${env_warning+$env_warning
+}unrecognized environment option \`$opt'" 				  ;;
+      *)	func_fatal_help "garbled LIBTOOLIZE_OPTIONS near \`$opt'" ;;
+    esac
+  done
+
+  test -n "$envopts" && {
+    func_quote_for_eval "$envopts"
+    eval set dummy "$func_quote_for_eval_result" ${1+"$@"}
+    shift
+  }
+}
+]])
+
+dnl SHORT	LONG			       DEFAULT		      INIT
+dnl ----------------------------------------------------------------------
+dnl   --automake, below, is for compatibility with automake 1.5
+M4SH_GETOPTS(
+  [c],		[--copy],			[],			[],
+  [f],		[--force],			[],			[],
+  [i],		[--install],			[],			[],
+  [n],		[--dry-run|--dryrun],		[],			[
+	CP="func_echo_all $CP"
+	test -n "$LN_S" && LN_S="func_echo_all $LN_S"
+	MKDIR="func_echo_all $MKDIR"
+	RM="func_echo_all $RM"
+	TAR="func_echo_all $TAR"],
+  [q],		[--quiet|--automake],		[],			[],
+  [v],		[--verbose],			[],			[],
+  [],		[--no-warning|--no-warn],	[],			[],
+  [],		[--nonrecursive|--non-recursive], [],			[],
+  [],		[--recursive],			[],			[],
+  [],		[--standalone],			[],			[],
+  [?],		[--ltdl],			[false],		[
+	# This is tricky, since we're overloading $opt_ltdl to be the
+	# optarg for --ltdl during option processing, but then stashing
+	# the (optional) optarg in $ltdldir and reusing $opt_ltdl to
+	# indicate that --ltdl was seen during option processing.  Also,
+	# be careful that --ltdl=foo --ltdl=bar results in ltdldir=bar:
+	case $opt_ltdl in
+          false|:) ;;  # a bare '--ltdl' followed by another option
+	  *)       ltdldir=`$ECHO "$optarg" | $SED 's,/*$,,'` ;;
+	esac
+	opt_ltdl=:],
+[
+  # show any warnings saved by LIBTOOLIZE_OPTIONS parsing
+  test -n "$env_warning" &&
+    echo "$env_warning" |while read line; do func_warning "$line"; done
+
+  # validate $opt_nonrecursive, $opt_recursive and $opt_standalone
+  if $opt_nonrecursive; then
+    if $opt_recursive || $opt_standalone; then
+      func_error "you can have at most one of --non-recursive, --recursive and --standalone"
+    fi
+    ltdl_mode=nonrecursive
+  elif $opt_recursive; then
+    $opt_standalone &&
+      func_error "you can have at most one of --non-recursive, --recursive and --standalone"
+    ltdl_mode=recursive
+  elif $opt_standalone; then
+    ltdl_mode=standalone
+  fi
+
+  # any remaining arguments are an error
+  test [$]# -gt 0 &&
+    func_fatal_help "unknown additional arguments: \`${1+$@}'"
+])
+
+
+M4SH_VERBATIM([[
+# func_echo_once msg_var
+# Calls func_echo with the value of MSG_VAR, and then sets MSG_VAR="" so
+# that subsequent calls have no effect.
+func_echo_once ()
+{
+    $opt_debug
+    if test -n "$1"; then
+      eval my_msg=\$$1
+
+      if test -n "$my_msg"; then
+        func_echo "$my_msg"
+        eval $1=""
+      fi
+    fi
+}
+
+
+# func_copy srcfile destfile [msg_var]
+# A wrapper for func_copy_cb that accepts arguments in the same order
+# as the cp(1) shell command.
+func_copy ()
+{
+    $opt_debug
+
+    test -f "$1" || \
+      { func_error "\`$1' not copied:  not a regular file"; return 1; }
+
+    func_dirname_and_basename "$1"
+    my_f1=$func_basename_result
+
+    if test -d "$2"; then
+
+      func_copy_cb "$my_f1" \
+	`$ECHO "$1" | $SED "$dirname"` "$2" "$3"
+
+    else
+
+      # Supporting this would mean changing the timestamp:
+      func_dirname_and_basename "$2"
+      my_tname=$func_basename_result
+      test "X$my_f1" = "X$my_tname" \
+        || func_fatal_error "func_copy() cannot change filename on copy"
+
+      func_copy_cb "$my_f1" \
+        `$ECHO "$1" | $SED "$dirname"` \
+        `$ECHO "$2" | $SED "$dirname"` \
+	"$3"
+
+    fi
+
+    return $copy_return_status # set in func_copy_cb
+}
+
+
+# func_copy_cb filename srcdir destdir [msg_var]
+# If option `--copy' was specified, or soft-linking SRCFILE to DESTFILE fails,
+# then try to copy SRCFILE to DESTFILE (without changing the timestamp if
+# possible).
+func_copy_cb ()
+{
+    $opt_debug
+    my_file="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_msg_var="$4"
+    copy_return_status=1
+
+    # Libtool is probably misinstalled if this happens:
+    test -f "$my_srcdir/$my_file" ||
+        func_fatal_error "\`$my_file' not found in \`$my_srcdir'"
+
+    case $opt_verbose in
+      false) my_copy_msg="file \`$my_destdir/$my_file'"     ;;
+      *)     my_copy_msg="file from \`$my_srcdir/$my_file'" ;;
+    esac
+    func_mkdir_p `$ECHO "$my_destdir/$my_file" | $SED "$dirname"`
+
+    $RM "$my_destdir/$my_file"
+    if $opt_copy; then
+      if { ( cd "$my_srcdir" && $TAR chf - "$my_file" ) 2>/dev/null \
+           | ( umask 0 && cd "$my_destdir" && $TAR xf - ) >/dev/null 2>&1; } \
+	 && touch "$my_destdir/$my_file"; then
+	$opt_quiet || func_echo_once "$my_msg_var"
+	$opt_quiet || func_echo "copying $my_copy_msg"
+	copy_return_status=0
+      fi
+    else
+      if test "$my_file" = "aclocal.m4"; then
+	if { ( cd "$my_srcdir" && $TAR chf - "$my_file" ) 2>/dev/null \
+	     | ( umask 0 && cd "$my_destdir" && $TAR xf - ) >/dev/null 2>&1 ; }
+	then
+	  $opt_quiet || func_echo_once "$my_msg_var"
+	  $opt_quiet || func_echo "copying $my_copy_msg"
+	  copy_return_status=0
+	fi
+      else
+	if $LN_S "$my_srcdir/$my_file" "$my_destdir/$my_file"; then
+	  $opt_quiet || func_echo_once "$my_msg_var"
+	  $opt_quiet || func_echo "linking $my_copy_msg"
+	  copy_return_status=0
+	fi
+      fi
+    fi
+    if test "$copy_return_status" != 0; then
+      $opt_quiet || func_echo_once "$my_msg_var"
+      func_error "can not copy \`$my_srcdir/$my_file' to \`$my_destdir/'"
+      exit_status=$EXIT_FAILURE
+    fi
+}
+
+
+# func_copy_some_files srcfile_spec srcdir destdir [msg_var] [cb=func_copy_cb]
+# Call COPY_CB for each regular file in SRCDIR named by the ':' delimited
+# names in SRCFILE_SPEC.  The odd calling convention is needed to allow
+# spaces in file and directory names.
+func_copy_some_files ()
+{
+    $opt_debug
+    my_srcfile_spec="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_msg_var="$4"
+    my_copy_cb="${5-func_copy_cb}"
+
+    my_save_IFS="$IFS"
+    IFS=:
+    for my_filename in $my_srcfile_spec; do
+      IFS="$my_save_IFS"
+      if test -f "$my_srcdir/$my_filename"; then
+        if test "X$my_copy_cb" = Xfunc_copy_cb; then
+	  $opt_force || if test -f "$my_destdir/$my_filename"; then
+	    $opt_quiet || func_echo_once "$my_msg_var"
+	    $opt_quiet \
+	      || func_error "\`$my_destdir/$my_filename' exists: use \`--force' to overwrite"
+	    continue
+	  fi
+        fi
+      else
+	func_echo_once "$my_msg_var"
+	func_fatal_error "\`$my_filename' not found in \`$my_srcdir'"
+      fi
+
+      $my_copy_cb "$my_filename" "$my_srcdir" "$my_destdir" "$my_msg_var"
+    done
+    IFS="$my_save_IFS"
+}
+
+
+# func_fixup_Makefile srcfile srcdir destdir
+func_fixup_Makefile ()
+{
+    $opt_debug
+    my_filename="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_fixup_non_subpackage_script="\
+      s,(LIBOBJS),(ltdl_LIBOBJS),g
+      s,(LTLIBOBJS),(ltdl_LTLIBOBJS),g
+      s,libltdl/configure.ac,,
+      s,libltdl/configure,,
+      s,libltdl/aclocal.m4,,
+      s,libltdl/config-h.in,,
+      s,libltdl/Makefile.am,,
+      s,libltdl/Makefile.in,,
+      /^[	 ]*\\\\\$/d"
+    case $my_filename in
+      Makefile.am)
+	my_fixup_non_subpackage_script=`echo "$my_fixup_non_subpackage_script" | \
+		sed 's,libltdl/,,'`
+	my_fixup_inc_paths_script= ;;
+      Makefile.inc)
+	repl=$ltdldir
+	repl_uscore=`$ECHO "$repl" | $SED 's,[/.+-],_,g'`
+	my_fixup_inc_paths_script="\
+	  s,libltdl_,@repl_uscore@_,
+	  s,libltdl/,@repl@/,
+	  s,: libltdl/,: @repl@/,
+	  s, -Ilibltdl , -I@repl@ ,
+	  s,\\\$(libltdl_,\$(@repl_uscore@_,
+	  s,)/libltdl ,)/@repl@ ,
+	  s,@repl_uscore@,${repl_uscore},g
+	  s,@repl@,${repl},g"
+	;;
+    esac
+
+    $RM "$my_destdir/$my_filename" 2>/dev/null
+    $opt_quiet || func_echo "creating file \`$my_destdir/$my_filename'"
+    if $opt_dry_run; then :;
+    else
+      $SED "$my_fixup_non_subpackage_script
+	    $my_fixup_inc_paths_script" \
+	< "$my_srcdir/$my_filename" > "$my_destdir/$my_filename" ||
+	func_fatal_error "cannot create $my_destdir/$my_filename"
+    fi
+}
+
+# func_scan_files
+# Scan configure.(ac|in) and aclocal.m4 (if present) for use of libltdl
+# and libtool.  Possibly running some of these tools if necessary.
+# Libtoolize affects the contents of aclocal.m4, and should be run before
+# aclocal, so we can't use configure --trace which relies on a consistent
+# configure.(ac|in) and aclocal.m4.
+func_scan_files ()
+{
+    $opt_debug
+    # Prefer configure.ac to configure.in
+    test -f configure.ac && configure_ac=configure.ac
+    test -f "$configure_ac" || configure_ac=
+
+    # Set local variables to reflect contents of configure.ac
+    my_sed_scan_configure_ac='s,#.*$,,; s,^dnl .*$,,; s, dnl .*$,,;
+	/AC_INIT/ {
+	    s,^.*$,seen_autoconf=:,
+	    p
+	}
+	d'
+    test -z "$configure_ac" \
+        || eval `$SED "$my_sed_scan_configure_ac" "$configure_ac"`
+
+    $seen_autoconf || {
+	my_configure_ac=
+	test -n "$configure_ac" && my_configure_ac="$configure_ac: "
+        func_verbose "${my_configure_ac}not using Autoconf"
+
+	# Make sure ltdldir and ltdl_mode have sensible defaults
+        # since we return early here:
+	test -n "$ltdldir" || ltdldir=libltdl
+	test -n "$ltdl_mode" || ltdl_mode=subproject
+
+	return
+    }
+
+    # ---------------------------------------------------- #
+    # Probe macro usage in configure.ac and/or aclocal.m4. #
+    # ---------------------------------------------------- #
+
+    my_sed_traces='s,#.*$,,; s,^dnl .*$,,; s, dnl .*$,,
+        s,^.*AC_REQUIRE(.*$,,; s,^.*m4@&t@_require(.*$,,;
+	s,^.*m4@&t@_define(.*$,,
+	s,^.*A[CU]_DEFUN(.*$,,; s,^.*m4@&t@_defun(.*$,,
+	/AC_CONFIG_AUX_DIR(/ {
+	    s,^.*AC_CONFIG_AUX_DIR([[	 ]*\([^])]*\).*$,ac_auxdir=\1,
+	    p
+        }
+	/AC_CONFIG_MACRO_DIR(/ {
+	    s,^.*AC_CONFIG_MACRO_DIR([[	 ]*\([^])]*\).*$,ac_macrodir=\1,
+	    p
+        }
+	/_LT_CONFIG_LTDL_DIR(/d
+	/LT_CONFIG_LTDL_DIR(/ {
+	    s,^.*LT_CONFIG_LTDL_DIR([[	 ]*\([^])]*\).*$,ac_ltdldir=\1,
+	    p
+	}
+	/\@<:@A[CM]_PROG_LIBTOOL/d
+	/A[CM]_PROG_LIBTOOL/ {
+	    s,^.*$,seen_libtool=:,
+	    p
+	}
+	/the.*option into.*LT_INIT.*parameter/d
+	/\@<:@LT_INIT/d
+	/LT_INIT/		 {
+	    s,^.*$,seen_libtool=:,
+	    p
+	}
+	/\@<:@LTDL_INIT/d
+	/LTDL_INIT/          {
+	    s,^.*LTDL_INIT([[	 ]*\([^])]*\).*$,ltdl_options="\1",
+	    s,^.*LTDL_INIT[	 ]*$,seen_ltdl=:,
+	    p
+	}
+	/LT_WITH_LTDL/       {
+	    s,^.*$,seen_ltdl=:,
+	    p
+	}
+	/AC_LIB_LTDL/        {
+	    s,^.*$,seen_ltdl=:,
+	    p
+	}
+	/AC_WITH_LTDL/       {
+	    s,^.*$,seen_ltdl=:,
+	    p
+	}
+	d'
+    eval `cat aclocal.m4 "$configure_ac" 2>/dev/null | $SED "$my_sed_traces"`
+
+
+    # ----------------- #
+    # Validate ltdldir. #
+    # ----------------- #
+
+    ac_ltdldir=`$ECHO "$ac_ltdldir" | $SED 's,/*$,,'`
+
+    # If $configure_ac contains AC_CONFIG_LTDL_DIR, check that its
+    # arguments were not given in terms of a shell variable!
+    case "$ac_ltdldir" in
+      *\$*)
+        func_fatal_error "can not handle variables in LT_CONFIG_LTDL_DIR"
+        ;;
+    esac
+
+    # If neither --ltdl nor LT_CONFIG_LTDL_DIR are specified, default to
+    # `libltdl'.  If both are specified, they must be the same.  Otherwise,
+    # take the one that is given! (If LT_CONFIG_LTDL_DIR is not specified
+    # we suggest adding it later in this code.)
+    case x$ac_ltdldir,x$ltdldir in
+      x,x)	ltdldir=libltdl		;;
+      x*,x)	ltdldir=$ac_ltdldir	;;
+      x,x*)	ltdldir=$ltdldir	;;
+      *)
+        test x"$ac_ltdldir" = x"$ltdldir" || \
+	    func_fatal_error "--ltdl='$ltdldir' does not match LT_CONFIG_LTDL_DIR($ac_ltdldir)"
+	;;
+    esac
+
+
+    # ------------------- #
+    # Validate ltdl_mode. #
+    # ------------------- #
+
+    test -n "$ltdl_options" && seen_ltdl=:
+
+    # If $configure_ac contains LTDL_INIT, check that its
+    # arguments were not given in terms of a shell variable!
+    case "$ltdl_options" in
+      *\$*)
+        func_fatal_error "can not handle variables in LTDL_INIT"
+        ;;
+    esac
+
+    # Extract mode name from ltdl_options
+    # FIXME: Diagnose multiple conflicting modes in ltdl_options
+    ac_ltdl_mode=
+    case " $ltdl_options " in
+      *" nonrecursive "*)  ac_ltdl_mode=nonrecursive	;;
+      *" recursive "*)     ac_ltdl_mode=recursive	;;
+      *" subproject "*)    ac_ltdl_mode=subproject	;;
+    esac
+
+    # If neither --ltdl nor an LTDL_INIT mode are specified, default to
+    # `subproject'.  If both are specified, they must be the same.  Otherwise,
+    # take the one that is given!
+    case x$ac_ltdl_mode,x$ltdl_mode in
+      x,x)	ltdl_mode=subproject	;;
+      x*,x)	ltdl_mode=$ac_ltdl_mode	;;
+      x,x*)	ltdl_mode=$ltdl_mode	;;
+      *)
+        test x"$ac_ltdl_mode" = x"$ltdl_mode" || \
+	    func_fatal_error "--$ltdl_mode does not match LTDL_INIT($ac_ltdl_mode)"
+	;;
+    esac
+
+    # ---------------- #
+    # Validate auxdir. #
+    # ---------------- #
+
+    if test -n "$ac_auxdir"; then
+      # If $configure_ac contains AC_CONFIG_AUX_DIR, check that it was
+      # not given in terms of a shell variable!
+      case "$ac_auxdir" in
+      *\$*)
+        func_fatal_error "can not handle variables in AC_CONFIG_AUX_DIR"
+        ;;
+      *)
+	auxdir=$ac_auxdir
+	;;
+      esac
+    else
+      # Try to discover auxdir the same way it is discovered by configure.
+      # Note that we default to the current directory.
+      for dir in . .. ../..; do
+        if test -f "$dir/install-sh"; then
+          auxdir=$dir
+          break
+        elif test -f "$dir/install.sh"; then
+          auxdir="$dir"
+          break
+        fi
+      done
+    fi
+
+    # Just use the current directory if all else fails.
+    test -n "$auxdir" || auxdir=.
+
+
+    # ------------------------------ #
+    # Find local m4 macro directory. #
+    # ------------------------------ #
+
+    # Hunt for ACLOCAL_AMFLAGS in `Makefile.am' for a `-I' argument.
+
+    my_sed_aclocal_flags='
+        /^[	 ]*ACLOCAL_[A-Z_]*FLAGS[	 ]*=[	 ]*/ {
+	    s,,,
+	    q
+	}
+	d'
+    if test -f Makefile.am; then
+      my_macrodir_is_next=false
+      for arg in `$SED "$my_sed_aclocal_flags" Makefile.am`; do
+        if $my_macrodir_is_next; then
+          am_macrodir="$arg"
+          break
+        else
+	  case $arg in
+	    -I) my_macrodir_is_next=: ;;
+	    -I*)
+	      am_macrodir=`$ECHO "$arg" | sed 's,^-I,,'`
+	      break
+	      ;;
+	    *) my_macrodir_is_next=false ;;
+	  esac
+        fi
+      done
+    fi
+
+    macrodir="$ac_macrodir"
+    test -z "$macrodir" && macrodir="$am_macrodir"
+
+    if test -n "$am_macrodir" && test -n "$ac_macrodir"; then
+      test "$am_macrodir" = "$ac_macrodir" \
+        || func_fatal_error "AC_CONFIG_MACRO_DIR([$ac_macrodir]) conflicts with ACLOCAL_AMFLAGS=-I $am_macrodir."
+    fi
+}
+
+# func_included_files searchfile
+# Output INCLUDEFILE if SEARCHFILE m4_includes it, else output SEARCHFILE.
+func_included_files ()
+{
+    $opt_debug
+    my_searchfile="$1"
+
+    my_include_regex=
+    my_sed_include='
+        /^m4@&t@_include(\[.*\])$/ {
+	    s,^m4@&t@_include(\[\(.*\)\])$,\1,
+	    p
+	}
+        d'
+
+    if test -f "$my_searchfile"; then
+      $ECHO "$my_searchfile"
+
+      # Only recurse when we don't care if all the variables we use get
+      # trashed, since they are in global scope.
+      for my_filename in `$SED "$my_sed_include" "$my_searchfile"`; do
+	func_included_files $my_filename
+      done
+    fi
+}
+
+
+# func_serial filename [macro_regex]
+# Output the value of the serial number comment in FILENAME, where the
+# comment line must also match MACRO_REGEX, if given.
+func_serial ()
+{
+    $opt_debug
+    my_filename="$1"
+    my_macro_regex="$2"
+    my_sed_serial='
+	/^# serial [1-9][0-9.]*[	 ]*'"$my_macro_regex"'[	 ]*$/ {
+	    s,^# serial \([1-9][0-9.]*\).*$,\1,
+	    q
+	}
+	d'
+
+    # Search FILENAME and all the files it m4_includes for a serial number
+    # in the file that AC_DEFUNs MACRO_REGEX.
+    my_serial=
+    func_dirname_and_basename "$my_filename"
+    my_filebase=$func_basename_result
+    for my_file in `func_included_files "$my_filename"`; do
+      if test -z "$my_macro_regex" ||
+         test "$my_filename" = aclocal.m4 ||
+         test "X$my_macro_regex" = "X$my_filebase" ||
+         func_grep '^AC_DEFUN(\@<:@'"$my_macro_regex" "$my_file"
+      then
+        my_serial=`$SED -e "$my_sed_serial" "$my_file"`
+	break
+      fi
+    done
+
+    # If the file has no serial number, we assume it's ancient.
+    test -n "$my_serial" || my_serial=0
+
+    $ECHO "$my_serial"
+}
+
+
+# func_serial_max serial1 serial2
+# Compare (possibly multi-part, '.' delimited) serial numbers, and
+# return the largest in $func_serial_max_result.  If they are the
+# same, func_serial_max_result will be empty.
+func_serial_max ()
+{
+    $opt_debug
+    my_serial1="$1"
+    my_serial2="$2"
+
+    my_sed_dot='s/\..*$//g'
+    my_sed_rest='s/^[0-9][1-9]*\.*//'
+    my_sed_digits='s/[^0-9.]//g'
+
+    # Incase they turn out to be the same, we'll set it to empty
+    func_serial_max_result=
+
+    test "X$1$2" = X`$ECHO "$1$2" | $SED "$my_sed_digits"` || {
+      func_error "serial numbers \`$1' or \`$2' contain non-digit chars"
+      return
+    }
+
+    while test -n "$my_serial1$my_serial2"; do
+      my_serial1_part=`$ECHO "$my_serial1" | $SED "$my_sed_dot"`
+      my_serial2_part=`$ECHO "$my_serial2" | $SED "$my_sed_dot"`
+
+      test -z "$my_serial1_part$my_serial2_part" \
+        && break
+
+      test -z "$my_serial1_part" \
+        && { func_serial_max_result="$2"; break; }
+
+      test -z "$my_serial2_part" \
+        && { func_serial_max_result="$1"; break; }
+
+      test "$my_serial1_part" -gt "$my_serial2_part" \
+        && { func_serial_max_result="$1"; break; }
+
+      test "$my_serial2_part" -gt "$my_serial1_part" \
+        && { func_serial_max_result="$2"; break; }
+
+      my_serial1=`$ECHO "$my_serial1" | $SED "$my_sed_rest"`
+      my_serial2=`$ECHO "$my_serial2" | $SED "$my_sed_rest"`
+    done
+}
+
+
+# func_serial_update_check srcfile src_serial destfile dest_serial
+# Unless SRC_SERIAL is newer than DEST_SERIAL set $func_serial_update_check
+# to 'false'.
+func_serial_update_check ()
+{
+    $opt_debug
+    my_srcfile="$1"
+    my_src_serial="$2"
+    my_destfile="$3"
+    my_dest_serial="$4"
+    my_update_p=:
+
+    if test -f "$my_destfile"; then
+      test "X$my_src_serial" = "X0" && {
+        func_warning "no serial number on \`$my_srcfile', not copying."
+	return
+      }
+
+      # Determine whether the destination has an older serial.
+      func_serial_max "$my_src_serial" "$my_dest_serial"
+      test "X$my_src_serial" = "X$func_serial_max_result" || my_update_p=false
+
+      test "X$my_src_serial" = "X$func_serial_max_result" \
+        && func_verbose "\`$my_srcfile' is serial $my_src_serial, greater than $my_dest_serial in \`$my_destfile'"
+
+      if test "X$my_dest_serial" = "X$func_serial_max_result"; then
+        func_verbose "\`$my_srcfile' is serial $my_src_serial, less than $my_dest_serial in \`$my_destfile'"
+	$opt_force || if test -n "$ac_macrodir$ac_ltdldir"; then
+           func_error "\`$my_destfile' is newer: use \`--force' to overwrite"
+        fi
+      fi
+    fi
+
+    func_serial_update_check_result="$my_update_p"
+}
+
+
+# func_aclocal_update_check filename
+# Unless serial number of FILENAME is newer than the matching serial number
+# in aclocal.m4, set $func_aclocal_update_check to 'false'.
+func_aclocal_update_check ()
+{
+    $opt_debug
+    my_srcfile="$aclocaldir/$1"
+    my_destfile="aclocal.m4"
+
+    case $need in
+      libtool.m4)
+	my_src_serial=`func_serial "$my_srcfile" LT_INIT`
+	my_dest_serial=`func_serial "$my_destfile" LT_INIT`
+
+	# Strictly, this libtoolize ought not to have to deal with ancient
+	# serial formats, but we accept them here to be complete:
+	test "X$my_src_serial" = "X0" &&
+	  my_src_serial=`func_serial "$my_srcfile" 'A[CM]_PROG_LIBTOOL'`
+	test "X$my_dest_serial" = "X0" &&
+	  my_dest_serial=`func_serial "$my_destfile" 'A[CM]_PROG_LIBTOOL'`
+	;;
+      ltdl.m4)
+	my_src_serial=`func_serial "$my_srcfile" LTDL_INIT`
+	my_dest_serial=`func_serial "$my_destfile" LTDL_INIT`
+	;;
+      *)
+	my_src_serial=`func_serial "$my_srcfile" "$need"`
+	my_dest_serial=`func_serial "$my_destfile" "$need"`
+	;;
+    esac
+
+    func_serial_update_check \
+      "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
+
+    func_aclocal_update_check_result="$func_serial_update_check_result"
+}
+
+
+# func_serial_update filename srcdir destdir [msg_var] [macro_re] [old_macro_re]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer serial number, or DESTFILE does not yet exist, or the user
+# specified `--force' at the command line.  If given, MACRO_REGEX or
+# OLD_MACRO_REGEX must match any text after "# serial N" in both files.
+func_serial_update ()
+{
+    $opt_debug
+    my_filename="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_msg_var="$4"
+    my_macro_regex="$5"
+    my_old_macro_regex="$6"
+
+    my_serial_update_p=:
+    my_return_status=1
+    my_srcfile="$my_srcdir/$my_filename"
+    my_destfile="$my_destdir/$my_filename"
+
+    test -f "$my_srcfile" || func_fatal_error "\`$my_srcfile' does not exist."
+
+    if test -f "$my_destfile"; then
+      my_src_serial=`func_serial "$my_srcfile" "$my_macro_regex"`
+      my_dest_serial=`func_serial "$my_destfile" "$my_macro_regex"`
+
+      # Strictly, this libtoolize ought not to have to deal with ancient
+      # serial formats, but we accept them here to be complete:
+      test "X$my_src_serial" = "X0" &&
+        my_src_serial=`func_serial "$my_srcfile" "$my_old_macro_regex"`
+
+      test "X$my_dest_serial" = "X0" &&
+        my_dest_serial=`func_serial "$my_destfile" "$my_old_macro_regex"`
+
+      func_serial_update_check \
+        "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
+      my_serial_update_p="$func_serial_update_check_result"
+    fi
+
+    if $my_serial_update_p || $opt_force; then
+      func_copy "$my_srcfile" "$my_destfile" "$my_msg_var"
+      my_return_status=$?
+    elif $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
+      $opt_quiet || func_echo_once "$my_msg_var"
+      $opt_quiet \
+        || func_echo "\`$my_destfile' is already up to date."
+    fi
+
+    # Do this after the copy for hand maintained `aclocal.m4', incase
+    # it has `m4_include([DESTFILE])', so the copy effectively already
+    # updated `aclocal.m4'.
+    my_included_files=`func_included_files aclocal.m4`
+    case `echo " $my_included_files " | $NL2SP` in
+
+      # Skip included files:
+      *" $my_destfile "*) ;;
+
+      # Otherwise compare to aclocal.m4 serial number (func_serial
+      # returns 0 for older macro serial numbers before we provided
+      # serial tags, so the update message will be correctly given
+      # if aclocal.m4 contains an untagged --i.e older-- macro file):
+      *)
+        if test -f aclocal.m4; then
+          func_serial_max \
+              "$my_src_serial" `func_serial aclocal.m4 "$my_macro_regex"`
+          if test "X$my_src_serial" = "X$func_serial_max_result"; then
+              func_echo_once "$my_msg_var"
+	      func_echo "You should add the contents of \`$my_destfile' to \`aclocal.m4'."
+          fi
+        fi
+        ;;
+    esac
+    return $my_return_status
+}
+
+
+# func_keyword_update filename srcdir destdir sed_script [msg_var]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer revision according to the serial number extracted by
+# SED_SCRIPT, or DESTFILE does not yet exist, or the user specified
+# `--force' at the command line.
+func_keyword_update ()
+{
+    $opt_debug
+    my_filename="$1"
+    my_srcdir="$2"
+    my_destdir="$3"
+    my_sed_script="$4"
+    my_msg_var="$5"
+
+    my_srcfile="$my_srcdir/$my_filename"
+    my_destfile="$my_destdir/$my_filename"
+
+    my_keyword_update_p=:
+
+    test -f "$my_srcfile" || func_fatal_error "\`$my_srcfile' does not exist."
+
+    if test -f "$my_destfile"; then
+      my_src_serial=`$SED -e "$my_sed_script" "$my_srcfile"`
+      test -z "$my_src_serial" && {
+        func_warning "no serial number in \`$my_srcfile', not copying."
+	return
+      }
+
+      my_dest_serial=`$SED -e "$my_sed_script" "$my_destfile"`
+      test -n "$my_dest_serial" || my_dest_serial=0
+
+      func_serial_update_check \
+         "$my_srcfile" "$my_src_serial" "$my_destfile" "$my_dest_serial"
+      my_keyword_update_p="$func_serial_update_check_result"
+    fi
+
+    if $my_keyword_update_p || $opt_force; then
+      func_copy "$my_srcfile" "$my_destfile" "$my_msg_var"
+    elif $opt_verbose || $opt_force && test "X$my_dest_serial" = "X$my_src_serial"; then
+      func_echo_once "$my_msg_var"
+      func_echo "\`$my_destfile' is already up to date."
+    fi
+}
+
+
+# func_ltmain_update filename srcdir destdir [msg_var]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer revision, or DESTFILE does not yet exist, or the user
+# specified `--force' at the command line.
+func_ltmain_update ()
+{
+    $opt_debug
+    my_sed_ltmain='
+	/^package_revision='\''*[0-9][1-9.]*'\''*/ {
+	    s,^package_revision='\''*\([0-9.]*\)'\''*[	 ]*$,\1,
+	    p
+	}
+	d'
+
+    func_keyword_update "$1" "$2" "$3" "$my_sed_ltmain" "$4"
+
+    return $my_return_status
+}
+
+
+# func_config_update filename srcdir destdir [msg_var]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer timestamp, or DESTFILE does not yet exist, or the user
+# specified `--force' at the command line.
+func_config_update ()
+{
+    $opt_debug
+    my_sed_config='
+	/^timestamp='\''*[0-9][1-9-]*'\''*/ {
+	    s,^timestamp='\''*\([0-9-]*\)'\''*,\1,
+	    s/-/./g
+	    p
+	}
+	d'
+
+    func_keyword_update "$1" "$2" "$3" "$my_sed_config" "$4"
+
+    return $my_return_status
+}
+
+
+# func_install_update filename srcdir destdir [msg_var]
+# Copy the FILENAME from a SRCDIR to DESTDIR provided that either FILENAME
+# has a newer timestamp, or DESTFILE does not yet exist, or the user
+# specified `--force' at the command line.
+func_install_update ()
+{
+    $opt_debug
+    my_sed_install='
+	/^scriptversion='\''*[0-9][1-9.-]*'\''*/ {
+	    s,[#;].*,,
+	    s,^scriptversion='\''*\([0-9.-]*\)'\''*,\1,
+	    s/-/./g
+	    p
+	}
+	d'
+
+    func_keyword_update "$1" "$2" "$3" "$my_sed_install" "$4"
+
+    return $my_return_status
+}
+
+
+# func_massage_aclocal_DATA [glob_exclude]
+# @aclocal_DATA\@ is substituted as per its value in Makefile.am;
+# this function massages it into a suitable format for func_copy_some_files.
+func_massage_aclocal_DATA ()
+{
+    $opt_debug
+    pkgmacro_files=     # GLOBAL VAR
+
+    my_glob_exclude="$1"
+
+    # Massage a value for pkgmacro_files from the value used in Makefile.am.
+    for my_filename in @aclocal_DATA@; do
+      func_dirname_and_basename "$my_filename"
+      my_filename=$func_basename_result
+
+      # ignore excluded filenames
+      if test -n "$my_glob_exclude"; then
+	my_cont=false
+	eval 'case $my_filename in '$my_glob_exclude') my_cont=: ;; esac'
+	$my_cont && continue
+      fi
+
+      pkgmacro_files="$pkgmacro_files:$my_filename"
+    done
+
+    # strip spurious leading `:'
+    pkgmacro_files=`$ECHO "$pkgmacro_files" | $SED 's,^:*,,'`
+}
+
+
+# func_install_pkgmacro_subproject
+# Unless --quiet was passed, display a message. Then copy pkgmacro_files
+# from libtool installation tree to subproject libltdl tree.
+func_install_pkgmacro_subproject ()
+{
+    $opt_debug
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgmacro_files; do
+      test -f "$subproject_macrodir/$file" && func_verbose "rm -f '$subproject_macrodir/$file'"
+      rm -f "$subproject_macrodir/$file"
+    done
+
+    # Copy all the files from installed libltdl to this project, if the
+    # user specified a macrodir.
+    $opt_quiet || if test "x$macrodir" != "x$subproject_macrodir"; then
+      pkgmacro_header="putting macros in \`$subproject_macrodir'."
+    elif test -n "$subproject_macrodir"; then
+      pkgmacro_header="putting macros in AC_CONFIG_MACRO_DIR, \`$subproject_macrodir'."
+    fi
+
+    func_copy_some_files "argz.m4:libtool.m4:ltdl.m4:$pkgmacro_files" \
+      "$aclocaldir" "$subproject_macrodir" pkgmacro_header
+}
+
+
+# func_install_pkgmacro_parent
+# Unless --quiet was passed, or AC_CONFIG_MACRO_DIR was not seen, display
+# a message.  Then update appropriate macros if newer ones are available
+# from the libtool installation tree.
+func_install_pkgmacro_parent ()
+{
+    $opt_debug
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgmacro_files; do
+      test -f "$macrodir/$file" && func_verbose "rm -f '$macrodir/$file'"
+      rm -f "$macrodir/$file"
+    done
+
+    # Copy all the files from installed libltdl to this project, if the
+    # user specified a macrodir.
+    $opt_quiet || if test -n "$ac_macrodir"; then
+      my_pkgmacro_header="putting macros in AC_CONFIG_MACRO_DIR, \`$ac_macrodir'."
+    elif test -n "$macrodir"; then
+      my_pkgmacro_header="putting macros in \`$macrodir'."
+    fi
+
+    if $opt_ltdl; then
+      func_serial_update argz.m4 "$aclocaldir" "$macrodir" \
+        my_pkgmacro_header argz.m4
+    else
+      func_verbose "Not copying \`$macrodir/argz.m4', libltdl not used."
+    fi
+
+    func_serial_update  libtool.m4 "$aclocaldir" "$macrodir" \
+      my_pkgmacro_header LT_INIT 'A[CM]_PROG_LIBTOOL'
+
+    if $opt_ltdl; then
+      func_serial_update ltdl.m4 "$aclocaldir" "$macrodir" \
+        my_pkgmacro_header 'LTDL_INIT'
+    else
+      func_verbose "Not copying \`$macrodir/ltdl.m4', libltdl not used."
+    fi
+
+    my_save_IFS="$IFS"
+    IFS=:
+    for file in $pkgmacro_files; do
+      IFS="$my_save_IFS"
+      func_serial_update "$file" "$aclocaldir" "$macrodir" \
+        my_pkgmacro_header "$file"
+    done
+    IFS="$my_save_IFS"
+}
+
+
+# func_install_pkgmacro_files
+# Install copies of the libtool and libltdl m4 macros into this package.
+func_install_pkgmacro_files ()
+{
+    $opt_debug
+
+    # argz.m4, libtool.m4 and ltdl.m4 are handled specially:
+    func_massage_aclocal_DATA 'argz.m4|libtool.m4|ltdl.m4'
+
+  # 1. Parent has separate macrodir to subproject ltdl:
+    if $opt_ltdl && test "x$ltdl_mode" = "xsubproject" &&
+       test -n "$macrodir" && test "x$macrodir" != "x$subproject_macrodir"
+    then
+      func_install_pkgmacro_parent
+      func_install_pkgmacro_subproject
+
+  # 2. Parent shares macrodir with subproject ltdl:
+    elif $opt_ltdl && test "x$ltdl_mode" = "xsubproject"
+       # && test "x$macrodir" = "x$subproject_macrodir"
+    then
+      func_install_pkgmacro_subproject
+
+  # 3. Not a subproject, but macrodir was specified in parent:
+    elif test -n "$macrodir"; then
+      func_install_pkgmacro_parent
+
+  # 4. AC_CONFIG_MACRO_DIR was not specified:
+    else
+      func_verbose "AC_CONFIG_MACRO_DIR not defined, not copying libtool macros."
+    fi
+}
+
+
+# func_massage_pkgltdl_files [glob_exclude]
+# @pkgltdl_files\@ is substituted as per its value in Makefile.am; this
+# function massages it into a suitable format for func_copy_some_files.
+func_massage_pkgltdl_files ()
+{
+    $opt_debug
+    pkgltdl_files=	# GLOBAL VAR
+
+    my_glob_exclude="$1"
+
+    # Massage a value for pkgltdl_files from the value used in Makefile.am
+    for my_filename in @pkgltdl_files@; do
+
+      # Strip surplus leading 'libltdl/':
+      my_filename=`expr "X$my_filename" : 'Xlibltdl/\(.*\)'`
+
+      # ignore excluded filenames
+      if test -n "$my_glob_exclude"; then
+	my_cont=false
+	eval 'case $my_filename in '$my_glob_exclude') my_cont=: ;; esac'
+	$my_cont && continue
+      fi
+
+      # ignore duplicates
+      case :$pkgltdl_files: in
+        *:$my_filename:*) ;;
+	*) pkgltdl_files="$pkgltdl_files:$my_filename" ;;
+      esac
+    done
+
+    # strip spurious leading `:'
+    pkgltdl_files=`$ECHO "$pkgltdl_files" | $SED 's,^:*,,'`
+}
+
+
+# func_install_pkgltdl_files
+# Install copies of the libltdl files into this package.  Any auxiliary
+# or m4 macro files needed in the libltdl tree will also be copied by
+# func_install_pkgconfig_files and func_install_pkgmacro_files resp.
+func_install_pkgltdl_files ()
+{
+    $opt_debug
+    $opt_ltdl || return
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgltdl_files; do
+      test -f "$ltdldir/$file" && func_verbose "rm -f '$ltdldir/$file'"
+      rm -f "$ltdldir/$file"
+    done
+
+    # Copy all the files from installed libltdl to this project, if the
+    # user specified `--ltdl'.
+    $opt_quiet || if test -n "$ac_ltdldir"; then
+      pkgltdl_header="putting libltdl files in LT_CONFIG_LTDL_DIR, \`$ac_ltdldir'."
+    elif test -n "$ltdldir"; then
+      pkgltdl_header="putting libltdl files in \`$ltdldir'."
+    fi
+
+    # These files are handled specially, depending on ltdl_mode:
+    if test "x$ltdl_mode" = "xsubproject"; then
+      func_massage_pkgltdl_files 'Makefile.inc'
+    else
+      func_massage_pkgltdl_files 'Makefile.am|Makefile.in*|aclocal.m4|config*'
+    fi
+
+    func_copy_some_files "$pkgltdl_files" \
+      "$pkgltdldir/libltdl" "$ltdldir" pkgltdl_header
+
+    # For recursive ltdl modes, copy a suitable Makefile.{am,inc}:
+    case $ltdl_mode in
+      recursive)
+        func_fixup_Makefile "Makefile.am" "$pkgltdldir/libltdl" "$ltdldir"
+        ;;
+      nonrecursive)
+        func_fixup_Makefile "Makefile.inc" "$pkgltdldir/libltdl" "$ltdldir"
+        ;;
+    esac
+}
+
+
+# func_massage_pkgconfig_files [glob_exclude]
+# @pkgconfig_files\@ is substituted as per its value in Makefile.am; this
+# function massages it into a suitable format for func_copy_some_files.
+func_massage_pkgconfig_files ()
+{
+    $opt_debug
+    pkgconfig_files=	# GLOBAL VAR
+
+    my_glob_exclude="$1"
+
+    # Massage a value for pkgconfig_files from the value used in Makefile.am
+    for my_filename in @pkgconfig_files@; do
+
+      # ignore excluded filenames
+      if test -n "$my_glob_exclude"; then
+	my_cont=false
+	eval 'case $my_filename in '$my_glob_exclude') my_cont=: ;; esac'
+	$my_cont && continue
+      fi
+
+      # ignore duplicates
+      case :$pkgconfig_files: in
+        *:$my_filename:*) ;;
+	*) pkgconfig_files="$pkgconfig_files:$my_filename" ;;
+      esac
+    done
+
+    # strip spurious leading `:'
+    pkgconfig_files=`$ECHO "$pkgconfig_files" | $SED 's,^:*,,'`
+}
+
+
+# func_install_pkgconfig_subproject
+# Unless --quiet was passed, display a message. Then copy pkgconfig_files
+# from libtool installation tree to subproject libltdl tree.
+func_install_pkgconfig_subproject ()
+{
+    $opt_debug
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgconfig_files; do
+      test -f "$subproject_auxdir/$file" && func_verbose "rm -f '$subproject_auxdir/$file'"
+      rm -f "$subproject_auxdir/$file"
+    done
+
+    # Copy all the files from installed libltdl to this project, if the
+    # user specified an auxdir.
+    $opt_quiet || if test "x$ac_auxdir" = "x$subproject_auxdir"; then
+      pkgconfig_header="putting auxiliary files in AC_CONFIG_AUX_DIR, \`$subproject_auxdir'."
+    elif test -n "$auxdir"; then
+      pkgconfig_header="putting auxiliary files in \`$auxdir'."
+    fi
+
+    func_copy_some_files "$pkgconfig_files" \
+      "$pkgdatadir" "$ltdldir" pkgconfig_header
+}
+
+
+# func_install_pkgconfig_parent
+# Unless --quiet was passed, or AC_CONFIG_AUX_DIR was not seen, display a
+# message.  Then update appropriate auxiliary files if newer ones are
+# available from the libtool installation tree.
+func_install_pkgconfig_parent ()
+{
+    $opt_debug
+
+    # Remove any lingering files that my have been installed by some
+    # previous libtoolize release:
+    $opt_force && for file in $all_pkgconfig_files; do
+      test -f "$auxdir/$file" && func_verbose "rm -f '$auxdir/$file'"
+      rm -f "$auxdir/$file"
+    done
+
+    if test -n "$ac_auxdir"; then
+      pkgconfig_header="putting auxiliary files in AC_CONFIG_AUX_DIR, \`$ac_auxdir'."
+    elif test -n "$auxdir" || test "x$ltdldir" = "x."; then
+      pkgconfig_header="putting auxiliary files in \`$auxdir'."
+    fi
+
+    if $opt_install; then
+      func_config_update config.guess \
+        "$pkgdatadir/config" "$auxdir" pkgconfig_header
+      func_config_update config.sub \
+        "$pkgdatadir/config" "$auxdir" pkgconfig_header
+      func_install_update install-sh \
+        "$pkgdatadir/config" "$auxdir" pkgconfig_header
+    fi
+    func_ltmain_update ltmain.sh \
+      "$pkgdatadir/config" "$auxdir" pkgconfig_header
+}
+
+
+# func_install_pkgconfig_files
+# Install copies of the auxiliary files into this package according to
+# the whether libltdl is included as a subproject, and whether the parent
+# shares the AC_CONFIG_AUX_DIR setting.
+func_install_pkgconfig_files ()
+{
+    $opt_debug
+    func_massage_pkgconfig_files
+
+  # 1. Parent shares auxdir with subproject ltdl:
+    if $opt_ltdl && test "x$ltdl_mode" = "xsubproject" &&
+       test "x$ac_auxdir" = "x$subproject_auxdir"
+    then
+      func_install_pkgconfig_subproject
+
+  # 2. Parent has separate auxdir to subproject ltdl:
+    elif $opt_ltdl && test "x$ltdl_mode" = "xsubproject"
+       # && test "x$auxdir" != "x$subproject_auxdir" is implied
+    then
+      if $seen_autoconf; then
+	func_install_pkgconfig_parent
+      fi
+      func_install_pkgconfig_subproject
+
+  # 3. Not subproject, but AC_CONFIG_AUX_DIR was used in parent:
+    elif test -n "$ac_auxdir" || test "x$auxdir" = "x."; then
+      func_install_pkgconfig_parent
+
+  # 4. AC_CONFIG_AUX_DIR was not specified:
+    else
+      func_verbose "AC_CONFIG_AUX_DIR not defined, not copying libtool auxiliary files."
+    fi
+}
+
+
+# func_nonemptydir_p dirvar
+# DIRVAR is the name of a variable to evaluate.  Unless DIRVAR names
+# a directory that exists and is non-empty abort with a diagnostic.
+func_nonemptydir_p ()
+{
+    $opt_debug
+    my_dirvar="$1"
+    my_dir=`eval echo "\\\$$my_dirvar"`
+
+    # Is it a directory at all?
+    test -d "$my_dir" \
+      || func_fatal_error "\$$my_dirvar is not a directory: \`$my_dir'"
+
+    # check that the directories contents can be ls'ed
+    test -n "`{ cd $my_dir && ls; } 2>/dev/null`" \
+        || func_fatal_error "can not list files: \`$my_dir'"
+}
+
+
+# func_check_macros
+# Sanity check macros from aclocal.m4 against installed versions.
+func_check_macros ()
+{
+    $opt_debug
+    $opt_quiet && return
+    $seen_autoconf || return
+
+    ac_config_macro_dir_advised=false
+
+    if test -n "$ac_macrodir$ltdldir" && test -z "$macrodir"; then
+      my_ac_config_macro_srcdir="$aclocaldir"
+      if $opt_ltdl && test "$macrodir" != "$subproject_macrodir"; then
+	my_ac_config_macro_srcdir="$subproject_macrodir"
+      fi
+
+      my_needed="libtool.m4 ltoptions.m4 ltversion.m4 ltsugar.m4 lt~obsolete.m4"
+      $opt_ltdl && my_needed="$my_needed argz.m4 ltdl.m4"
+
+      if test -f "aclocal.m4"; then
+	for need in $my_needed; do
+	  func_aclocal_update_check $need
+	  $func_aclocal_update_check_result && my_missing="$my_missing $need"
+	done
+      else
+        my_missing="$my_needed"
+      fi
+
+      if test -n "$my_missing"; then
+        func_echo "You should add the contents of the following files to \`aclocal.m4':"
+        for need in $my_missing; do
+	  func_echo "  \`$my_ac_config_macro_srcdir/$need'"
+        done
+
+        if test "$my_ac_config_macro_srcdir" != "$aclocaldir"; then
+          func_echo "or else add \`AC_CONFIG_MACRO_DIR([$subproject_macrodir])' to $configure_ac."
+	  ac_config_macro_dir_advised=:
+        fi
+      fi
+    fi
+
+    ## ---------------------------------------------------------- ##
+    ## Since we return early here when --no-warn was given:       ##
+    ## DO NOT PUT ANYTHING BUT UPGRADE ADVICE MESSAGES BELOW HERE ##
+    ## ---------------------------------------------------------- ##
+
+    $opt_warning || return
+
+    $seen_libtool ||
+      func_echo "Remember to add \`LT_INIT' to $configure_ac."
+
+    # Suggest using LTDL_INIT if appropriate:
+    $opt_ltdl && if test x$seen_ltdl != x:; then
+      case $ltdl_mode in
+	subproject) ltdl_init_args=""               ;;
+	*)          ltdl_init_args="([$ltdl_mode])" ;;
+      esac
+      func_echo "Remember to add \`LTDL_INIT$ltdl_init_args' to $configure_ac."
+    fi
+
+    if $opt_ltdl; then
+      # Remind the user to call LT_CONFIG_LTDL_DIR:
+      test -n "$ac_ltdldir" ||
+        func_echo "Remember to add \`LT_CONFIG_LTDL_DIR([$ltdldir])' to \`$configure_ac'."
+
+      # For subproject mode, offer some suggestions for avoiding duplicate
+      # files in a project that uses libltdl:
+      if test "x$ltdl_mode" = "xsubproject"; then
+        test "$subproject_auxdir" = "$auxdir" ||
+          func_echo "Consider using \`AC_CONFIG_AUX_DIR([$subproject_auxdir])' in $configure_ac."
+        $ac_config_macro_dir_advised || test "$subproject_macrodir" = "$macrodir" ||
+          func_echo "Consider using \`AC_CONFIG_MACRO_DIR([$subproject_macrodir])' in $configure_ac."
+	ac_config_macro_dir_advised=:
+      fi
+    fi
+
+    # Suggest modern idioms for storing autoconf macros:
+    $ac_config_macro_dir_advised || if test -z "$ac_macrodir" || test x"$macrodir" = x.; then
+      func_echo "Consider adding \`AC_CONFIG_MACRO_DIR([m4])' to $configure_ac and"
+      func_echo "rerunning $progname, to keep the correct libtool macros in-tree."
+      ac_config_macro_dir_advised=:
+
+    elif test -z "$ac_macrodir$ltdldir"; then
+      func_echo "Consider adding \`AC_CONFIG_MACRO_DIR([$macrodir])' to $configure_ac,"
+      func_echo "and rerunning $progname and aclocal."
+      ac_config_macro_dir_advised=:
+    fi
+
+    if test -z "$am_macrodir$macrodir"; then
+      func_echo "Consider adding \`-I m4' to ACLOCAL_AMFLAGS in Makefile.am."
+
+    elif test -z "$am_macrodir"; then
+      if $opt_ltdl && test "x$ltdl_mode" = "xsubproject" && test "$subproject_macrodir" != "$macrodir"; then
+	func_echo "Consider adding \`-I $subproject_macrodir' to ACLOCAL_AMFLAGS in Makefile.am."
+      else
+        func_echo "Consider adding \`-I $macrodir' to ACLOCAL_AMFLAGS in Makefile.am."
+      fi
+    fi
+
+    # Don't trace for this, we're just checking the user didn't invoke it
+    # directly from configure.ac.
+    $SED 's,dnl .*$,,; s,# .*$,,' "$configure_ac" | grep AC_PROG_RANLIB >/dev/null &&
+      func_echo "\`AC_PROG_RANLIB' is rendered obsolete by \`LT_INIT'"
+
+    # FIXME: Ensure ltmain.sh, libtool.m4 and ltdl.m4 are from the same release
+}
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+{
+  # Lists of all files libtoolize has ever installed.  These are removed
+  # before installing the latest files when --force was passed to help
+  # ensure a clean upgrade.
+  # Do not remove config.guess nor config.sub, we don't install them
+  # without --install, and the project may not be using Automake.
+  all_pkgconfig_files="ltmain.sh"
+  all_pkgmacro_files="argz.m4 libtool.m4 ltdl.m4 ltoptions.m4 ltsugar.m4 ltversion.in ltversion.m4 lt~obsolete.m4"
+  all_pkgltdl_files="COPYING.LIB Makefile Makefile.in Makefile.inc Makefile.am README acinclude.m4 aclocal.m4 argz_.h argz.c config.h.in config-h.in configure configure.ac configure.in libltdl/lt__alloc.h libltdl/lt__dirent.h libltdl/lt__glibc.h libltdl/lt__private.h libltdl/lt__strl.h libltdl/lt_dlloader.h libltdl/lt_error.h libltdl/lt_system.h libltdl/slist.h loaders/dld_link.c loaders/dlopen.c loaders/dyld.c loaders/load_add_on.c loaders/loadlibrary.c loaders/preopen.c loaders/shl_load.c lt__alloc.c lt__dirent.c lt__strl.c lt_dlloader.c lt_error.c ltdl.c ltdl.h slist.c"
+
+  # Locations for important files:
+  prefix=@prefix@
+  datadir=@datadir@
+  pkgdatadir=@pkgdatadir@
+  pkgltdldir=@pkgdatadir@
+  aclocaldir=@aclocaldir@
+  auxdir=
+  macrodir=
+  configure_ac=configure.in
+
+  seen_autoconf=false
+  seen_libtool=false
+  seen_ltdl=false
+
+  # test EBCDIC or ASCII
+  case `echo X|tr X '\101'` in
+   A) # ASCII based system
+      # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+    SP2NL='tr \040 \012'
+    NL2SP='tr \015\012 \040\040'
+    ;;
+   *) # EBCDIC based system
+    SP2NL='tr \100 \n'
+    NL2SP='tr \r\n \100\100'
+    ;;
+  esac
+
+  # Allow the user to override the master libtoolize repository:
+  if test -n "$_lt_pkgdatadir"; then
+    pkgltdldir="$_lt_pkgdatadir"
+    pkgdatadir="$_lt_pkgdatadir/libltdl"
+    aclocaldir="$_lt_pkgdatadir/libltdl/m4"
+  fi
+  func_nonemptydir_p pkgltdldir
+  func_nonemptydir_p pkgdatadir
+  func_nonemptydir_p aclocaldir
+
+  func_scan_files
+
+  case $ltdldir in
+  .) ltdlprefix= ;;
+  *) ltdlprefix=$ltdldir/ ;;
+  esac
+  subproject_auxdir=${ltdlprefix}config
+  subproject_macrodir=${ltdlprefix}m4
+
+  # :::BE CAREFUL HERE:::
+  # func_check_macros needs to check whether --ltdl was specified when
+  # LTDL_INIT was not seen, so we can't just use one variable for both
+  # conditions, or that check will be impossible.   No need to clutter the
+  # rest of the code with '$opt_ltdl || $seen_ltdl' though, because we CAN
+  # safely set opt_ltdl to true if LTDL_INIT was seen:
+  $seen_ltdl && opt_ltdl=:
+
+  func_install_pkgconfig_files
+  func_install_pkgmacro_files
+  func_install_pkgltdl_files
+
+  func_check_macros
+}
+
+exit $exit_status
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+]])
diff --git a/tests/am-subdir.at b/tests/am-subdir.at
new file mode 100644
index 0000000..6455b1e
--- /dev/null
+++ b/tests/am-subdir.at
@@ -0,0 +1,150 @@
+# am-subdir.at -- libtool subdir-objects support              -*- Autotest -*-
+
+#   Copyright (C) 2004, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AT_BANNER([Libtool subdir-objects support.])
+
+
+## ----------- ##
+## C Language. ##
+## ----------- ##
+
+AT_SETUP([C subdir-objects])
+
+AT_DATA([[configure.ac]],
+[[AC_INIT([subdir-demo], ]]AT_PACKAGE_VERSION[[, ]]AT_PACKAGE_BUGREPORT[[)
+AM_INIT_AUTOMAKE
+LT_INIT([win32-dll])
+AC_PROG_CC
+AM_PROG_CC_C_O
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([[Makefile.am]],
+[[ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = subdir-objects foreign 1.6
+AM_CPPFLAGS	= -I$(top_srcdir)/../..
+
+lib_LTLIBRARIES		= subdir/libsub.la
+subdir_libsub_la_SOURCES= subdir/sub.c
+
+bin_PROGRAMS		= subdir/subdemo
+subdir_subdemo_SOURCES	= subdir/main.c
+subdir_subdemo_LDADD	= subdir/libsub.la
+]])
+
+test -d subdir || { rm -f subdir && mkdir subdir; }
+
+AT_DATA([[subdir/main.c]],
+[[#include <stdio.h>
+
+extern void sub (void);
+
+int main (void)
+{
+  printf ("Welcome to GNU Libtool subdir-objects test!\n");
+  sub();
+  return 0;
+}
+]])
+
+AT_DATA([[subdir/sub.c]],
+[[#include <stdio.h>
+void sub (void) { printf ("** This is libsub **\n"); }
+]])
+
+LT_AT_BOOTSTRAP([--copy], [-I m4], [ignore], [--add-missing])
+
+LT_AT_EXEC_CHECK([subdir/subdemo], 0, stdout)
+AT_CHECK([grep 'Welcome to GNU Libtool subdir-objects test' stdout],
+	 [], [ignore])
+AT_CHECK([grep 'This is libsub' stdout],
+	 [], [ignore])
+
+AT_CLEANUP
+
+
+## ------------- ##
+## C++ Language. ##
+## ------------- ##
+
+AT_SETUP([C++ subdir-objects])
+LT_AT_TAG([CXX])
+
+AT_DATA([[configure.ac]],
+[[AC_INIT([subdir-demo], ]]AT_PACKAGE_VERSION[[, ]]AT_PACKAGE_BUGREPORT[[)
+AM_INIT_AUTOMAKE
+AC_PROG_CC
+AM_PROG_CC_C_O
+AC_PROG_CXX
+AC_PROG_CXXCPP
+
+AC_LANG([C++])
+LT_INIT([win32-dll])
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([[Makefile.am]],
+[[ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = subdir-objects foreign 1.6
+AM_CPPFLAGS	= -I$(top_srcdir)/../..
+
+lib_LTLIBRARIES		= subdir/libsub.la
+subdir_libsub_la_SOURCES= subdir/sub.cxx subdir/sub.hxx
+
+bin_PROGRAMS		= subdir/subdemo
+subdir_subdemo_SOURCES	= subdir/main.cxx
+subdir_subdemo_LDADD	= subdir/libsub.la
+]])
+
+test -d subdir || { rm -f subdir && mkdir subdir; }
+
+AT_DATA([[subdir/sub.hxx]],
+[[class libsub { public: int sub (void); };
+]])
+
+AT_DATA([[subdir/main.cxx]],
+[[#include "sub.hxx"
+
+int main (void)
+{
+  libsub SUB;
+  return SUB.sub() != 27;
+}
+]])
+
+AT_DATA([[subdir/sub.cxx]],
+[[#include "sub.hxx"
+
+int libsub::sub (void) { return 27; }
+]])
+
+LT_AT_BOOTSTRAP([--copy], [-I m4], [ignore], [--add-missing])
+
+LT_AT_EXEC_CHECK([subdir/subdemo], 0)
+
+AT_CLEANUP
diff --git a/tests/archive-in-archive.at b/tests/archive-in-archive.at
new file mode 100644
index 0000000..fd67c7d
--- /dev/null
+++ b/tests/archive-in-archive.at
@@ -0,0 +1,59 @@
+# dmacks.at --  test for dmacks bug  -*- Autotest -*-
+#
+#   Copyright (C) 2007, 2008, 2010 Free Software Foundation, Inc.
+#   Written by Peter O'Gorman, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AT_SETUP([static library contains static library])
+AT_KEYWORDS([libtool])
+
+# This test passes with MS lib.
+AT_XFAIL_IF([case $AR in ar-lib\ * | *[[/\\]]ar-lib\ *) false;; *) :;; esac])
+
+AT_DATA([foo.c],
+[
+int foo() { return 1;}
+])
+
+AT_DATA([bar.c],
+[
+int bar() { return 1;}
+])
+
+thisdir=`cd . && pwd`
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o foo.lo foo.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o bar.lo bar.c
+$LIBTOOL --mode=link --tag=CC --tag=disable-shared $CC $CFLAGS $LDFLAGS \
+-o libfoo.la foo.lo -version-info 1:0:0 -rpath $thisdir
+$LIBTOOL --mode=install cp libfoo.la $thisdir 
+eval `$EGREP '^(old_library)=' < libfoo.la`
+libfoo=$old_library
+AT_CHECK([$LIBTOOL --mode=link --tag=CC --tag=disable-shared $CC $CFLAGS $LDFLAGS \
+	 -o libbar.la bar.lo $libfoo -version-info 1:0:0 -rpath $thisdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp libbar.la $thisdir], [], [ignore], [ignore])
+eval `$EGREP '^(old_library)=' < libbar.la`
+libbar=$old_library
+AT_CHECK([$AR -t $libbar | grep $libfoo],[1],[ignore],[ignore])
+AT_CHECK([$AR -t $libbar | grep foo.$OBJEXT],[],[ignore],[ignore])
+AT_CHECK([$AR -t $libbar | grep bar.$OBJEXT],[],[ignore],[ignore])
+AT_CLEANUP
diff --git a/tests/bindir.at b/tests/bindir.at
new file mode 100644
index 0000000..4e2fecc
--- /dev/null
+++ b/tests/bindir.at
@@ -0,0 +1,365 @@
+# bindir.at -  Test the -bindir option
+#
+#   Copyright (C) 2009, 2010 Free Software Foundation, Inc.
+#   Written by Dave Korn, 2009
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+####
+#  In this testcase, and in the chunk of code that makes use
+# of $bindir in ltmain.m4sh, we would very much have liked to
+# automatically decide which systems require dynamically-loaded
+# libraries to be installed to a directory in $PATH according
+# to the libtool properties that tell us that "the system provides
+# no way to hard-code library paths into executables, and also
+# has no $shlibpath_var independent of the PATH variable", in
+# Ralf's words.  But it turns out this is not possible, as:-
+#
+#> * Dave Korn wrote on Fri, Aug 14, 2009 at 04:30:27AM CEST:
+#>>> Ralf Wildenhues wrote:
+#>>>
+#>>>>> But in this particular case, I would argue that either you look at
+#>>>>> the libtool variables shlibpath_var and hardcode_action for "PATH"
+#>>>>> and "unsupported".
+#>>>
+#>>> On Cygwin, $hardcode_action = "immediate" in the generated libtool
+#>>> script. Did you perhaps mean $hardcode_shlibpath_var, which is indeed
+#>>> "unsupported"?
+#>
+#> Oh brother, yes, I forgot about those bogus hardcode_libdir_flag_spec
+#> settings.  They fool _LT_LINKER_HARDCODE_LIBPATH.  I don't remember whether
+#> they were needed in order to not break some semantics in ltmain (they
+#> probably were).
+#>
+#> Anyway, $hardcode_action = "immediate" is definitely wrong, but fixing that
+#> now is also way out of scope of this patch.  So I guess we need to stick to
+#> host matching in the code, and work out a separate fix for the setting of
+#> $hardcode_libdir_flag_spec.
+#
+# So alas we punt for now, and just hardcode the relevant OSs that require
+# this functionality.  That's Cygwin, MinGW and CeGCC for now; see the case
+# statement in libtool.m4sh around where the 'tdlname' variable is set.
+
+####
+# First a simple test that we can build and run an executable with a couple of
+# tiny libraries.
+
+AT_SETUP([bindir basic lib test])
+
+bindirneeded=:
+case "$host_os" in
+  cygwin*|mingw*|cegcc*)
+    ;;
+  *)
+    bindirneeded=false
+    ;;
+esac
+
+####
+# These routines save the PATH before a test and restore it after,
+# prepending a chosen directory to the path on the platforms where
+# -bindir is needed after saving.
+#
+
+func_save_and_prepend_path ()
+{
+  save_PATH=$PATH
+  if $bindirneeded ; then
+    PATH=$1:$PATH
+  fi
+  export PATH
+}
+
+func_restore_path ()
+{
+  PATH=$save_PATH
+  export PATH
+}
+
+AT_DATA([foo.c],[[
+int x=11;
+]])
+
+AT_DATA([baz.c],[[
+extern int x;
+int baz (void);
+int baz (void) { return x;}
+]])
+
+AT_DATA([bar.c],[[
+extern int baz (void);
+int y=3;
+int bar (void);
+int bar (void) { return y + baz ();}
+]])
+
+AT_DATA([main.c],[[
+#include <stdlib.h>
+extern int baz (void);
+extern int bar (void);
+int main() {
+if (baz () + bar () - 25) abort ();
+return 0;
+}
+]])
+
+
+curdir=`pwd`
+eval "`$LIBTOOL --config | grep '^objdir='`"
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o foo.lo $CPPFLAGS $CFLAGS foo.c],[0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o baz.lo $CPPFLAGS $CFLAGS baz.c],[0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC -no-undefined -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS foo.lo baz.lo -rpath $curdir/$objdir],[0],[ignore],[ignore])
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o bar.lo $CPPFLAGS $CFLAGS bar.c],[0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC -no-undefined -o libbar.la $CPPFLAGS $CFLAGS $LDFLAGS bar.lo libfoo.la -rpath $curdir/$objdir],[0],[ignore],[ignore])
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o main.lo $CPPFLAGS $CFLAGS main.c],[0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS main.lo libbar.la libfoo.la],[0],[ignore],[ignore])
+
+# Check both static and shared versions run.  We don't install them
+# here, that will be covered by the later tests; we've rpath'd things
+# so that they can all be run in situ.
+
+LT_AT_NOINST_EXEC_CHECK([./main])
+
+# Ensure libraries can be found on PATH, if we are on one
+# of the affected platforms, before testing the shared version.
+
+func_save_and_prepend_path $curdir/$objdir
+$bindirneeded && {
+  LT_AT_NOINST_EXEC_CHECK([$objdir/main])
+}
+
+#  In fact, prepending the PATH as above is superfluous on the windows
+# platforms that this feature is primarily aimed at, as the DLL search
+# path always includes the directory from which the app was launched.
+# To make sure it still works even when not side-by-side, we'll install
+# the main executable and execute it from there while the PATH still
+# points to the shared libs in the .libs subdir.  On other platforms,
+# the rpaths we set at link time will guarantee it runs from the bindir.
+
+mkdir $curdir/bin
+AT_CHECK([$LIBTOOL --mode=install $lt_INSTALL main$EXEEXT $curdir/bin/main$EXEEXT], [], [ignore], [ignore])
+LT_AT_EXEC_CHECK([$curdir/bin/main$EXEEXT], [0], [ignore], [ignore], [])
+func_restore_path
+
+AT_CLEANUP
+
+####
+# This is the main testcase.  For a variety of bindir and libdir
+# settings, it verifies that all the files get installed exactly
+# where we want them to go, and that they can be executed once
+# installed.
+#
+
+AT_SETUP([bindir install tests])
+
+bindirneeded=:
+case "$host_os" in
+  cygwin*|mingw*|cegcc*)
+    ;;
+  *)
+    bindirneeded=false
+    ;;
+esac
+
+eval "`$LIBTOOL --config | grep '^build_libtool_libs='`"
+AT_CHECK([test "$build_libtool_libs" = yes || exit 77])
+
+####
+# These routines save the PATH before a test and restore it after,
+# prepending a chosen directory to the path on the platforms where
+# -bindir is needed after saving.
+#
+
+func_save_and_prepend_path ()
+{
+  save_PATH=$PATH
+  if $bindirneeded ; then
+    PATH=$1:$PATH
+  fi
+  export PATH
+}
+
+func_restore_path ()
+{
+  PATH=$save_PATH
+  export PATH
+}
+
+AT_DATA([foo.c],[[
+int x=11;
+]])
+
+AT_DATA([baz.c],[[
+extern int x;
+int baz (void);
+int baz (void) { return x;}
+]])
+
+AT_DATA([bar.c],[[
+extern int baz (void);
+int y=3;
+int bar (void);
+int bar (void) { return y + baz ();}
+]])
+
+AT_DATA([main.c],[[
+#include <stdlib.h>
+extern int baz (void);
+extern int bar (void);
+int main() {
+if (baz () + bar () - 25) abort ();
+return 0;
+}
+]])
+
+# We only need to compile once, but we'll need to relink for each different value
+# of libdir in order to set the rpath, and we'll install for each combination of
+# libdir and bindir.
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o foo.lo $CPPFLAGS $CFLAGS foo.c],[0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o baz.lo $CPPFLAGS $CFLAGS baz.c],[0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o bar.lo $CPPFLAGS $CFLAGS bar.c],[0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o main.lo $CPPFLAGS $CFLAGS main.c],[0],[ignore],[ignore])
+
+# Now try installing the libs.  There are the following cases:
+# No -bindir
+# -bindir below lib install dir
+# -bindir is lib install dir
+# -bindir beside lib install dir
+# -bindir above lib dir
+# -bindir above and beside lib dir
+# -bindir in entirely unrelated prefix.
+
+curdir=`pwd`
+for libdir in \
+	$curdir/usr/lib/gcc/i686-pc-cygwin/4.5.0 \
+	$curdir/usr/lib/gcc/../gcc/.//i686-pc-cygwin/4.5.0/../../././//. \
+	$curdir/usr/lib/ \
+	$curdir/usr/lib \
+	$curdir/baz \
+	$curdir/baz/lib/ ;
+do
+
+  # Do a basic install with no -bindir option for reference.  We use the sbin/
+  # dir for the main exe to avoid the potential "this only works because it's
+  # side-by-side with the libs" default DLL search path problem mentioned above.
+  rm -rf $libdir $curdir/bin $curdir/sbin $curdir/baz $curdir/usr
+  AS_MKDIR_P($libdir)
+  AS_MKDIR_P($curdir/sbin)
+  AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC -no-undefined -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS foo.lo bar.lo baz.lo -rpath $libdir],[0],[ignore],[ignore])
+  AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS main.lo libfoo.la -rpath $libdir],[0],[ignore],[ignore])
+  AT_CHECK([$LIBTOOL --mode=install $lt_INSTALL libfoo.la $libdir], [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=install $lt_INSTALL main$EXEEXT $curdir/sbin/main$EXEEXT], [], [ignore], [ignore])
+
+  # And ensure it went where we expect.  Could be looking for any of
+  # 'cygfoo-0.dll', 'libfoo-0.dll', 'foo-0.dll', or 'libfoo.so.0'.  We'll
+  # simplify this check by taking advantage of the fact that if it's a DLL,
+  # it has to go in bindir, so we'll not check for both forms in libdir.
+  if $bindirneeded; then
+    AT_CHECK([test -f $libdir/../bin/???foo-0.dll || ls $libdir/../bin/*foo*0*], [], [ignore], [ignore])
+  else
+    AT_CHECK([ls $libdir/*foo*], [], [ignore], [ignore])
+  fi
+
+  # And that it can be executed.
+  extrapath=
+  $bindirneeded && extrapath=$libdir/../bin
+  func_save_and_prepend_path $extrapath
+  LT_AT_EXEC_CHECK([$curdir/sbin/main$EXEEXT], [0], [ignore], [ignore], [])
+  func_restore_path
+
+  for bindir in \
+	$curdir/usr/lib/gcc/i686-pc-cygwin/4.5.0/bin/ \
+	$curdir/usr/lib/gcc/i686-pc-cygwin/4.5.0/bin \
+	$curdir/usr/lib/gcc/i686-pc-cygwin/bin \
+	$curdir/usr/lib/bin \
+	$curdir/usr/bin/ \
+	$curdir/usr/bin \
+	/tmp/foo/bar ;
+  do
+
+    # Clear any old stuff out before we install.  Because bindir
+    # may be in /tmp, we have to take care to create it securely
+    # and not to delete and recreate it if we do.
+    rm -rf $libdir $curdir/bin $curdir/sbin $curdir/baz $curdir/usr
+
+    tmp=
+    case $bindir in
+      /tmp*)
+        # Create a temporary directory $tmp in $TMPDIR (default /tmp).
+        # Use mktemp if possible; otherwise fall back on mkdir,
+        # with $RANDOM to make collisions less likely.
+        : ${TMPDIR=/tmp}
+        {
+          tmp=`
+            (umask 077 && mktemp -d "$TMPDIR/fooXXXXXX") 2>/dev/null
+          ` &&
+          test -n "$tmp" && test -d "$tmp"
+        } || {
+          tmp=$TMPDIR/foo$$-$RANDOM
+          (umask 077 && mkdir "$tmp")
+        } || AT_CHECK([exit 77])
+        bindir=$tmp/bar
+      ;;
+      *)
+        # Clear any old stuff out before we install.
+        rm -rf $bindir
+        AS_MKDIR_P($bindir)
+      ;;
+    esac
+
+    # Relink with new rpaths.
+    AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC -no-undefined -bindir $bindir -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS foo.lo bar.lo baz.lo -rpath $libdir],[0],[ignore],[ignore])
+    AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS main.lo libfoo.la],[0],[ignore],[ignore])
+
+    # Recreate directories (bindir already done) and install.
+    AS_MKDIR_P($libdir)
+    AS_MKDIR_P($curdir/sbin)
+    AT_CHECK([$LIBTOOL --mode=install $lt_INSTALL libfoo.la $libdir], [], [ignore], [ignore])
+    AT_CHECK([$LIBTOOL --mode=install $lt_INSTALL main$EXEEXT $curdir/sbin/main$EXEEXT], [], [ignore], [ignore])
+
+    # Ensure it went to bindir rather than default dir this time.
+    if $bindirneeded; then
+      AT_CHECK([test -f $bindir/???foo-0.dll || ls $bindir/*foo*0*], [], [ignore], [ignore])
+    else
+      AT_CHECK([ls $libdir/*foo*], [], [ignore], [ignore])
+    fi
+
+    # And that it can be executed.
+    extrapath=
+    $bindirneeded && extrapath=$bindir
+    func_save_and_prepend_path $extrapath
+    LT_AT_EXEC_CHECK([$curdir/sbin/main$EXEEXT], [0], [ignore], [ignore], [])
+    func_restore_path
+
+    # Clean up if we made a temp dir.  Subdirs under our testdir get rm'd
+    # and recreated at the top of the loop.  Securely created subdirs under
+    # /tmp get created precisely once and rm'd when we're done with them.
+    if test ! -z "$tmp" ; then
+      rm -rf "$tmp"
+    fi
+
+  done
+done
+
+AT_CLEANUP
diff --git a/tests/cdemo-conf.test b/tests/cdemo-conf.test
new file mode 100755
index 0000000..4869730
--- /dev/null
+++ b/tests/cdemo-conf.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# cdemo-conf.test - try configuring the cdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/cdemo"
+func_make_distclean
+func_configure
+func_check_static_shared "yes" "yes"
+
+exit 0
diff --git a/tests/cdemo-exec.test b/tests/cdemo-exec.test
new file mode 100755
index 0000000..dce62f2
--- /dev/null
+++ b/tests/cdemo-exec.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# cdemo-exec.test - check that programs in the cdemo subdirectory are viable
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "cdemo-make" "tests/cdemo/cdemo$EXEEXT"
+
+func_rmprefixdir
+func_exec_init "uninstalled"
+func_exec "tests/cdemo/cdemo$EXEEXT"
+
+exit $exec_status
diff --git a/tests/cdemo-make.test b/tests/cdemo-make.test
new file mode 100755
index 0000000..08e70a5
--- /dev/null
+++ b/tests/cdemo-make.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# cdemo-make.test - try building in the cdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "cdemo-conf" "tests/cdemo/Makefile"
+
+func_rmprefixdir
+func_cd "tests/cdemo"
+func_make
+
+exit 0
diff --git a/tests/cdemo-shared-exec.test b/tests/cdemo-shared-exec.test
new file mode 100755
index 0000000..6de58fd
--- /dev/null
+++ b/tests/cdemo-shared-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/cdemo-exec.test
diff --git a/tests/cdemo-shared-make.test b/tests/cdemo-shared-make.test
new file mode 100755
index 0000000..cb3792c
--- /dev/null
+++ b/tests/cdemo-shared-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/cdemo-make.test
diff --git a/tests/cdemo-shared.test b/tests/cdemo-shared.test
new file mode 100755
index 0000000..2d58bd3
--- /dev/null
+++ b/tests/cdemo-shared.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# cdemo-shared.test - try configuring the cdemo subdirectory for shared libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/cdemo"
+func_make_distclean
+func_configure "--disable-static"
+func_check_static_shared "no" "yes"
+
+exit 0
diff --git a/tests/cdemo-static-exec.test b/tests/cdemo-static-exec.test
new file mode 100755
index 0000000..6de58fd
--- /dev/null
+++ b/tests/cdemo-static-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/cdemo-exec.test
diff --git a/tests/cdemo-static-make.test b/tests/cdemo-static-make.test
new file mode 100755
index 0000000..cb3792c
--- /dev/null
+++ b/tests/cdemo-static-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/cdemo-make.test
diff --git a/tests/cdemo-static.test b/tests/cdemo-static.test
new file mode 100755
index 0000000..36ac2c5
--- /dev/null
+++ b/tests/cdemo-static.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# cdemo-static.test - try configuring the cdemo subdirectory for static libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/cdemo"
+func_make_distclean
+func_configure "--disable-shared"
+func_check_static_shared "yes" "no"
+
+exit 0
diff --git a/tests/cdemo-undef-exec.test b/tests/cdemo-undef-exec.test
new file mode 100755
index 0000000..6de58fd
--- /dev/null
+++ b/tests/cdemo-undef-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/cdemo-exec.test
diff --git a/tests/cdemo-undef-make.test b/tests/cdemo-undef-make.test
new file mode 100755
index 0000000..cb3792c
--- /dev/null
+++ b/tests/cdemo-undef-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/cdemo-make.test
diff --git a/tests/cdemo-undef.test b/tests/cdemo-undef.test
new file mode 100755
index 0000000..7d5cd9b
--- /dev/null
+++ b/tests/cdemo-undef.test
@@ -0,0 +1,49 @@
+#! /bin/sh
+# cdemo-undef - test generating shared libraries with undefined symbols
+#
+#   Copyright (C) 2003, 2004, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/cdemo"
+func_make_distclean
+func_configure "--disable-static"
+
+grep '^allow_undefined_flag=.\{0,1\}unsupported.\{0,1\}$' ./libtool >/dev/null 2>&1 \
+    && func_skip "$host doesn't support undefined symbols in shared libs"
+
+if test -f ./libtool; then
+  $SED 's,allow_undefined=no,allow_undefined=yes,g' ./libtool > ltnew
+else
+  exit 1
+fi
+
+if test -f ./ltnew; then
+  rm -f libtool
+  mv ltnew libtool
+else
+  exit 1
+fi
+
+exit 0
diff --git a/tests/cdemo/Makefile.am b/tests/cdemo/Makefile.am
new file mode 100644
index 0000000..ba58fea
--- /dev/null
+++ b/tests/cdemo/Makefile.am
@@ -0,0 +1,53 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS  = -I ../../libltdl/m4
+AM_CPPFLAGS	 = -I$(top_srcdir)/../..
+
+noinst_LTLIBRARIES = libfoo.la
+
+libfoo_la_SOURCES = foo.c
+libfoo_la_LIBADD = $(LIBM)
+libfoo_la_LDFLAGS = -no-undefined
+
+noinst_HEADERS = foo.h
+
+bin_PROGRAMS = cdemo
+
+cdemo_SOURCES = main.c
+cdemo_LDADD = libfoo.la
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
diff --git a/tests/cdemo/Makefile.in b/tests/cdemo/Makefile.in
new file mode 100644
index 0000000..24247bf
--- /dev/null
+++ b/tests/cdemo/Makefile.in
@@ -0,0 +1,693 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = cdemo$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \
+	$(srcdir)/../../libltdl/config/config.guess \
+	$(srcdir)/../../libltdl/config/config.sub \
+	$(srcdir)/../../libltdl/config/install-sh \
+	$(srcdir)/../../libltdl/config/ltmain.sh \
+	$(srcdir)/../../libltdl/config/missing $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	../../libltdl/config/compile ../../libltdl/config/config.guess \
+	../../libltdl/config/config.sub ../../libltdl/config/depcomp \
+	../../libltdl/config/install-sh ../../libltdl/config/ltmain.sh \
+	../../libltdl/config/mdate-sh ../../libltdl/config/missing \
+	../../libltdl/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+LTLIBRARIES = $(noinst_LTLIBRARIES)
+am__DEPENDENCIES_1 =
+libfoo_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_libfoo_la_OBJECTS = foo.lo
+libfoo_la_OBJECTS = $(am_libfoo_la_OBJECTS)
+libfoo_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libfoo_la_LDFLAGS) $(LDFLAGS) -o $@
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_cdemo_OBJECTS = main.$(OBJEXT)
+cdemo_OBJECTS = $(am_cdemo_OBJECTS)
+cdemo_DEPENDENCIES = libfoo.la
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libfoo_la_SOURCES) $(cdemo_SOURCES)
+DIST_SOURCES = $(libfoo_la_SOURCES) $(cdemo_SOURCES)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS = -I ../../libltdl/m4
+AM_CPPFLAGS = -I$(top_srcdir)/../..
+noinst_LTLIBRARIES = libfoo.la
+libfoo_la_SOURCES = foo.c
+libfoo_la_LIBADD = $(LIBM)
+libfoo_la_LDFLAGS = -no-undefined
+noinst_HEADERS = foo.h
+cdemo_SOURCES = main.c
+cdemo_LDADD = libfoo.la
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libfoo.la: $(libfoo_la_OBJECTS) $(libfoo_la_DEPENDENCIES) 
+	$(libfoo_la_LINK)  $(libfoo_la_OBJECTS) $(libfoo_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+cdemo$(EXEEXT): $(cdemo_OBJECTS) $(cdemo_DEPENDENCIES) 
+	@rm -f cdemo$(EXEEXT)
+	$(LINK) $(cdemo_OBJECTS) $(cdemo_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool \
+	clean-noinstLTLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libtool \
+	clean-noinstLTLIBRARIES ctags dist dist-all dist-bzip2 \
+	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+	distcheck distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-binPROGRAMS
+
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/cdemo/README b/tests/cdemo/README
new file mode 100644
index 0000000..fd3e418
--- /dev/null
+++ b/tests/cdemo/README
@@ -0,0 +1,4 @@
+This is cdemo, an example package that uses GNU libtool with an
+Automake-generated environment to build two simple libraries and programs.
+
+It demonstrates how to build convenience libraries
diff --git a/tests/cdemo/aclocal.m4 b/tests/cdemo/aclocal.m4
new file mode 100644
index 0000000..d479ce3
--- /dev/null
+++ b/tests/cdemo/aclocal.m4
@@ -0,0 +1,956 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../libltdl/m4/libtool.m4])
+m4_include([../../libltdl/m4/ltoptions.m4])
+m4_include([../../libltdl/m4/ltsugar.m4])
+m4_include([../../libltdl/m4/ltversion.m4])
+m4_include([../../libltdl/m4/lt~obsolete.m4])
diff --git a/tests/cdemo/configure b/tests/cdemo/configure
new file mode 100755
index 0000000..2472bcf
--- /dev/null
+++ b/tests/cdemo/configure
@@ -0,0 +1,13533 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for cdemo 1.0.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='cdemo'
+PACKAGE_TARNAME='cdemo'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='cdemo 1.0'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="main.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+LIBM
+LIBTOOL_DEPS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures cdemo 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/cdemo]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of cdemo 1.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+cdemo configure 1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by cdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in ../../libltdl/config "$srcdir"/../../libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../libltdl/config \"$srcdir\"/../../libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='cdemo'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+
+
+
+        enable_dlopen=no
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+
+## ---------------------------- ##
+## Libraries required by cdemo. ##
+## ---------------------------- ##
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _mwvalidcheckl in -lmw" >&5
+$as_echo_n "checking for _mwvalidcheckl in -lmw... " >&6; }
+if ${ac_cv_lib_mw__mwvalidcheckl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmw  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char _mwvalidcheckl ();
+int
+main ()
+{
+return _mwvalidcheckl ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_mw__mwvalidcheckl=yes
+else
+  ac_cv_lib_mw__mwvalidcheckl=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mw__mwvalidcheckl" >&5
+$as_echo "$ac_cv_lib_mw__mwvalidcheckl" >&6; }
+if test "x$ac_cv_lib_mw__mwvalidcheckl" = xyes; then :
+  LIBM="-lmw"
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="$LIBM -lm"
+fi
+
+  ;;
+*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="-lm"
+fi
+
+  ;;
+esac
+
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by cdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+cdemo config.status 1.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/tests/cdemo/configure.ac b/tests/cdemo/configure.ac
new file mode 100644
index 0000000..727a2eb
--- /dev/null
+++ b/tests/cdemo/configure.ac
@@ -0,0 +1,63 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#   Copyright (C) 2001, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AC_PREREQ(2.54)
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([cdemo], [1.0], [bug-libtool@gnu.org])
+AC_CONFIG_SRCDIR([main.c])
+AC_CONFIG_AUX_DIR([../../libltdl/config])
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+AC_PROG_CC
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LT_INIT
+AC_SUBST([LIBTOOL_DEPS])
+
+
+## ---------------------------- ##
+## Libraries required by cdemo. ##
+## ---------------------------- ##
+LT_LIB_M
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/tests/cdemo/foo.c b/tests/cdemo/foo.c
new file mode 100644
index 0000000..b522fec
--- /dev/null
+++ b/tests/cdemo/foo.c
@@ -0,0 +1,42 @@
+/* foo.c -- trivial test library
+
+   Copyright (C) 1998-1999, 2007 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+  This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+
+#include <math.h>
+
+int
+foo()
+{
+  printf ("cos (0.0) = %g\n", (double) cos ((double) 0.0));
+  return FOO_RET;
+}
+
+int
+hello()
+{
+  printf ("** This is libfoo **\n");
+  return HELLO_RET;
+}
diff --git a/tests/cdemo/foo.h b/tests/cdemo/foo.h
new file mode 100644
index 0000000..ae66563
--- /dev/null
+++ b/tests/cdemo/foo.h
@@ -0,0 +1,37 @@
+/* foo.h -- interface to the libfoo* libraries
+
+   Copyright (C) 1998-1999 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#ifndef _FOO_H_
+#define _FOO_H_ 1
+
+/* Silly constants that the functions return. */
+#define HELLO_RET 0xe110
+#define FOO_RET 0xf00
+
+extern int foo();
+
+extern int hello();
+
+#endif /* !_FOO_H_ */
diff --git a/tests/cdemo/main.c b/tests/cdemo/main.c
new file mode 100644
index 0000000..aef8bf0
--- /dev/null
+++ b/tests/cdemo/main.c
@@ -0,0 +1,45 @@
+/* main.c -- cdemo test program
+
+   Copyright (C) 1998-1999, 2006 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+
+
+int
+main ()
+{
+  int value;
+
+  printf ("Welcome to GNU libtool cdemo!\n");
+
+  value = hello();
+  printf ("hello returned: %i\n", value);
+  if (value == HELLO_RET)
+    printf("hello is ok!\n");
+
+  if (foo () == FOO_RET)
+    printf("foo is ok!\n");
+
+  return 0;
+}
diff --git a/tests/cmdline_wrap.at b/tests/cmdline_wrap.at
new file mode 100644
index 0000000..13edabc
--- /dev/null
+++ b/tests/cmdline_wrap.at
@@ -0,0 +1,46 @@
+# cmdline_wrap.at -- run tests with low max_cmd_len           -*- Autotest -*-
+
+#   Copyright (C) 2007, 2009 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Make sure libtool works when it needs to wrap command lines.
+# We simulate this by setting max_cmd_len very low.
+
+AT_SETUP([Run tests with low max_cmd_len])
+AT_KEYWORDS([recursive])
+m4_ifdef([AT_CAPTURE_FILE],
+[AT_CAPTURE_FILE([testsuite.log])])
+
+sed 's,max_cmd_len=.*,max_cmd_len="24",' < $LIBTOOL > libtool
+chmod +x libtool
+LIBTOOL=`pwd`/libtool
+export LIBTOOL
+# run the suite in a subdirectory, otherwise the two suites will compete
+# for the output file `testsuite.log'.
+mkdir tests
+cd tests
+INNER_TESTSUITEFLAGS="$INNER_TESTSUITEFLAGS abs_top_srcdir=$abs_top_srcdir \
+  abs_builddir=$abs_builddir"
+AT_CHECK([$CONFIG_SHELL $abs_srcdir/testsuite -k libtool$INNER_TESTSUITEFLAGS],
+	 [], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/configure-iface.at b/tests/configure-iface.at
new file mode 100644
index 0000000..2071646
--- /dev/null
+++ b/tests/configure-iface.at
@@ -0,0 +1,328 @@
+# configure-iface.at -- test ltdl configure interface         -*- Autotest -*-
+#
+#   Copyright (C) 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([configure interface to libltdl.])
+
+# _LT_AT_LTDL_SETUP
+# -----------------
+m4_pushdef([_LT_AT_LTDL_SETUP],
+[AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+
+typedef int funcp (void);
+
+static int errors = 0;
+
+int
+main (void)
+{
+  lt_dlhandle handle;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (lt_dlinit () != 0)
+    {
+      fprintf (stderr, "error during initialization: %s\n", lt_dlerror ());
+      return 1;
+    }
+
+  handle = lt_dlopenext ("libmodule");
+  if (!handle)
+    {
+      fprintf (stderr, "can't open libmodule: %s\n", lt_dlerror ());
+      ++errors;
+    }
+
+  {
+    funcp *f = (funcp *) lt_dlsym (handle, "f");
+
+    if (f)
+      {
+        printf ("%d\n", f ());
+      }
+    else
+      {
+        fprintf (stderr, "function `f' not found: %s\n", lt_dlerror ());
+        ++errors;
+      }
+  }
+
+  if (lt_dlexit () != 0)
+    {
+      fprintf (stderr, "error during exit: %s\n", lt_dlerror ());
+      ++errors;
+    }
+
+  return (errors != 0);
+}
+]])
+
+AT_DATA([libmodule.c],
+[[#ifdef __cplusplus
+extern "C" {
+#endif
+int f (void) { return 5150; }
+#ifdef __cplusplus
+}
+#endif
+]])
+
+LT_AT_HOST_DATA([expout],
+[[5150
+]])
+])# _LT_AT_LTDL_SETUP
+
+
+## -------------------- ##
+## Installable libltdl. ##
+## -------------------- ##
+
+AT_SETUP([installable libltdl])
+AT_KEYWORDS([libltdl])
+
+_LT_AT_LTDL_SETUP
+
+AT_DATA([configure.ac],
+[[AC_INIT([installable-ltdl-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+AC_CONFIG_AUX_DIR([libltdl/config])
+AC_CONFIG_MACRO_DIR([libltdl/m4])
+AC_CONFIG_HEADERS([config.h:config.hin])
+LT_CONFIG_LTDL_DIR([libltdl])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT([dlopen])
+LTDL_INIT([installable])
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],
+[[AUTOMAKE_OPTIONS	= 1.7
+
+SUBDIRS			= libltdl
+
+AM_CPPFLAGS		= $(LTDLINCL)
+
+lib_LTLIBRARIES		= libmodule.la
+# Automake < 1.8 will use libmodule.la.c as default source,
+# while newer will choose libmodule.c; so specify it here.
+libmodule_la_SOURCES	= libmodule.c
+libmodule_la_LDFLAGS	= -module
+
+bin_PROGRAMS		= main
+main_LDFLAGS		= -dlopen libmodule.la
+main_LDADD		= $(LIBLTDL)
+main_DEPENDENCIES	= $(LTDLDEPS) libmodule.la
+]])
+
+# Install everything!
+prefix=`pwd`/_inst
+
+LT_AT_BOOTSTRAP([--ltdl], [-I libltdl/m4], [], [--add-missing], [],
+        [--with-included-ltdl --prefix=$prefix], [all install])
+
+# TODO: Check that the installed program `main' is linked against our libltdl
+AT_CHECK([test -f $prefix/lib/libltdl.la])
+AT_CHECK([test -f $prefix/include/ltdl.h])
+
+# Check that main is rebuilt if libltdl.la is newer
+rm -f libltdl/libltdl.la
+AT_CHECK([$MAKE -q main$EXEEXT || exit 1], [1], [ignore], [ignore])
+
+AT_CLEANUP
+
+
+## ------------------------------- ##
+## Link against installed libltdl. ##
+## ------------------------------- ##
+
+AT_SETUP([--with-ltdl-include/lib])
+AT_KEYWORDS([libltdl])
+
+# Install libltdl
+prefix=`pwd`/_inst
+
+LT_AT_LIBTOOLIZE([--copy --ltdl=ltdl])
+
+(cd ltdl
+LT_AT_CONFIGURE([--enable-ltdl-install --prefix=$prefix])
+LT_AT_MAKE([all install])
+)
+
+# Remove build files
+rm -rf ltdl/
+
+AT_CHECK([test -f $prefix/lib/libltdl.la])
+AT_CHECK([test -f $prefix/include/ltdl.h])
+
+_LT_AT_LTDL_SETUP
+
+AT_DATA([configure.ac],
+[[AC_INIT([configure-iface-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+AC_CONFIG_MACRO_DIR([_inst/aclocal])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT([dlopen])
+LTDL_INIT
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],
+[[AUTOMAKE_OPTIONS	= 1.7
+
+AM_CPPFLAGS		= $(LTDLINCL)
+
+lib_LTLIBRARIES		= libmodule.la
+# Automake < 1.8 will use libmodule.la.c as default source,
+# while newer will choose libmodule.c; so specify it here.
+libmodule_la_SOURCES	= libmodule.c
+libmodule_la_LDFLAGS	= -module
+
+bin_PROGRAMS		= main
+main_LDFLAGS		= -dlopen libmodule.la
+main_LDADD		= $(LIBLTDL)
+main_DEPENDENCIES	= $(LTDLDEPS) libmodule.la
+]])
+
+## Try to avoid linking against a previously installed libltdl found
+## with an explicit -L/path.
+save_LDFLAGS=$LDFLAGS
+LDFLAGS=
+for l in $save_LDFLAGS
+do
+  case $l in
+  -L*) ;;
+  *) LDFLAGS="$LDFLAGS $l" ;;
+  esac
+done
+
+# We don't use 'libtoolize --ltdl', so that we get an error if the test
+# tries to build and link against its own ltdl sources:
+LT_AT_BOOTSTRAP([], [-I _inst/aclocal], [], [--add-missing], [],
+	[--with-ltdl-lib=$prefix/lib --with-ltdl-include=$prefix/include],
+	[all])
+
+## TODO: portable ldd check for correct libltdl
+## Currently, this test doesn't fail if `main' ends up linking against a
+## previously installed system libltdl.
+LT_AT_NOINST_EXEC_CHECK([./main], [-dlopen libmodule.la], [], [expout], [])
+
+AT_CLEANUP
+
+
+## ------------------------------------- ##
+## Link against shipped libltdl sources. ##
+## ------------------------------------- ##
+
+AT_SETUP([--with-included-ltdl])
+AT_KEYWORDS([libltdl])
+
+_LT_AT_LTDL_SETUP
+
+AT_DATA([configure.ac],
+[[AC_INIT([configure-iface-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+AC_CONFIG_AUX_DIR([libltdl/config])
+AC_CONFIG_MACRO_DIR([libltdl/m4])
+AC_CONFIG_HEADERS([config.h:config.hin])
+LT_CONFIG_LTDL_DIR([libltdl])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT([dlopen])
+LTDL_INIT
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],
+[[AUTOMAKE_OPTIONS	= 1.7
+
+SUBDIRS			= libltdl
+
+AM_CPPFLAGS		= $(LTDLINCL)
+
+lib_LTLIBRARIES		= libmodule.la
+# Automake < 1.8 will use libmodule.la.c as default source,
+# while newer will choose libmodule.c; so specify it here.
+libmodule_la_SOURCES	= libmodule.c
+libmodule_la_LDFLAGS	= -module
+
+bin_PROGRAMS		= main
+main_LDFLAGS		= -dlopen libmodule.la
+main_LDADD		= $(LIBLTDL)
+main_DEPENDENCIES	= $(LTDLDEPS) libmodule.la
+]])
+
+LT_AT_BOOTSTRAP([--ltdl], [-I libltdl/m4], [], [--add-missing], [],
+        [--with-included-ltdl], [all])
+
+# --with-included-ltdl should build a convenience lib by default
+AT_CHECK([test -f libltdl/libltdlc.la])
+
+## TODO: portable ldd check for correct libltdl
+## Currently, this test doesn't fail if `main' ends up linking against a
+## previously installed system libltdl.
+LT_AT_NOINST_EXEC_CHECK([./main], [-dlopen libmodule.la], [], [expout], [])
+
+# Check that main is rebuilt if libltdlc.la is newer
+rm -f libltdl/libltdlc.la
+AT_CHECK([$MAKE -q main$EXEEXT || exit 1], [1], [ignore], [ignore])
+
+AT_CLEANUP
+
+
+## -------------------- ##
+## Convenience libltdl. ##
+## -------------------- ##
+
+AT_SETUP([convenience libltdl])
+
+AT_DATA([configure.ac],
+[[AC_INIT
+AC_CONFIG_AUX_DIR([libltdl/config])
+AC_LIBLTDL_CONVENIENCE
+AC_LIBTOOL_DLOPEN
+AC_PROG_LIBTOOL
+AC_CONFIG_FILES(Makefile)
+AC_OUTPUT
+]])
+AT_DATA([Makefile.in],
+[[LIBLTDL = @LIBLTDL@
+print-ltdl:
+	echo $(LIBLTDL)
+]])
+
+LT_AT_BOOTSTRAP([--ltdl], [-I libltdl/m4], [ignore], [ignore], [], [], [ignore])
+AT_CHECK([$MAKE print-ltdl], [], [stdout], [ignore])
+AT_CHECK([grep libltdl/libltdlc.la stdout], [], [ignore])
+
+AT_CLEANUP
+
+dnl Be careful not to let the definition leak into other tests
+m4_popdef([_LT_AT_LTDL_SETUP])
diff --git a/tests/convenience.at b/tests/convenience.at
new file mode 100644
index 0000000..f076e61
--- /dev/null
+++ b/tests/convenience.at
@@ -0,0 +1,282 @@
+# convenience.at -- testing C convenience archives            -*- Autotest -*-
+
+#   Copyright (C) 2005, 2007, 2008, 2009, 2010 Free Software Foundation,
+#   Inc.
+#   Written by Ralf Wildenhues, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Test that convenience archives work.
+# for each TAG, test:
+# - adding one or multiple convenience archives
+# - with or without additional objects on the cmdline
+
+AT_SETUP([C convenience archives])
+AT_KEYWORDS([libtool])
+
+cat >main1.c <<EOF
+extern int a1(void);
+int main(void) { return a1() != 1; }
+EOF
+cat >main2.c <<EOF
+extern int a1(void), a2(void);
+int main(void) { return a1() + a2() != 3; }
+EOF
+cat >main3.c <<EOF
+extern int a1(void), a2(void), a3(void);
+int main(void) { return a1() + a2() + a3() != 6; }
+EOF
+for i in 1 2 3; do 
+  echo "int a$i(void) { return $i; }" > a$i.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c main$i.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a$i.c
+  $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la a$i.lo
+done
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  LT_AT_EXEC_CHECK([./main_static])
+  LT_AT_EXEC_CHECK([./main])
+done
+AT_CLEANUP
+
+
+AT_SETUP([C++ convenience archives])
+LT_AT_TAG([CXX])
+AT_KEYWORDS([libtool])
+
+cat >main1.cpp <<EOF
+extern int a1(void);
+int main(void) { return a1() != 1; }
+EOF
+cat >main2.cpp <<EOF
+extern int a1(void), a2(void);
+int main(void) { return a1() + a2() != 3; }
+EOF
+cat >main3.cpp <<EOF
+extern int a1(void), a2(void), a3(void);
+int main(void) { return a1() + a2() + a3() != 6; }
+EOF
+for i in 1 2 3; do 
+  echo "int a$i(void) { return $i; }" > a$i.cpp
+  $LIBTOOL --tag=CXX --mode=compile $CXX $CXXFLAGS -c main$i.cpp
+  $LIBTOOL --tag=CXX --mode=compile $CXX $CXXFLAGS -c a$i.cpp
+  $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o liba$i.la a$i.lo
+done
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  LT_AT_EXEC_CHECK([./main_static])
+  LT_AT_EXEC_CHECK([./main])
+done
+AT_CLEANUP
+
+
+AT_SETUP([F77 convenience archives])
+LT_AT_TAG([F77])
+AT_KEYWORDS([libtool])
+
+cat >main1.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      end
+EOF
+cat >main2.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      call a2(res)
+      end
+EOF
+cat >main3.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      call a2(res)
+      call a3(res)
+      end
+EOF
+
+for i in 1 2 3; do 
+  cat >a$i.f <<EOF
+      subroutine a$i(res)
+      implicit none
+      integer*4 res
+      res=$i
+      return
+      end
+EOF
+  $LIBTOOL --tag=F77 --mode=compile $F77 $FFLAGS -c main$i.f
+  $LIBTOOL --tag=F77 --mode=compile $F77 $FFLAGS -c a$i.f
+  $LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o liba$i.la a$i.lo
+done
+AT_CHECK([$LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  AT_CHECK([$LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  AT_CHECK([$LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  LT_AT_EXEC_CHECK([./main_static])
+  LT_AT_EXEC_CHECK([./main])
+done
+AT_CLEANUP
+
+
+AT_SETUP([FC convenience archives])
+LT_AT_TAG([FC])
+AT_KEYWORDS([libtool])
+
+cat >main1.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      end
+EOF
+cat >main2.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      call a2(res)
+      end
+EOF
+cat >main3.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      call a2(res)
+      call a3(res)
+      end
+EOF
+
+for i in 1 2 3; do 
+  cat >a$i.f <<EOF
+      subroutine a$i(res)
+      implicit none
+      integer*4 res
+      res=$i
+      return
+      end
+EOF
+  $LIBTOOL --tag=FC --mode=compile $FC $FCFLAGS -c main$i.f
+  $LIBTOOL --tag=FC --mode=compile $FC $FCFLAGS -c a$i.f
+  $LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o liba$i.la a$i.lo
+done
+AT_CHECK([$LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  AT_CHECK([$LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  AT_CHECK([$LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  LT_AT_EXEC_CHECK([./main_static])
+  LT_AT_EXEC_CHECK([./main])
+done
+AT_CLEANUP
+
+
+AT_SETUP([Java convenience archives])
+LT_AT_EXEC_TAG([GCJ])
+AT_KEYWORDS([libtool])
+
+cat >foo1.java <<EOF
+public class foo1 {
+  public static void main(String[[]] argv) {
+    A1 a1 = new A1();
+  }
+}
+EOF
+cat >foo2.java <<EOF
+public class foo2 {
+  public static void main(String[[]] argv) {
+    A1 a1 = new A1(); A2 a2 = new A2();
+  }
+}
+EOF
+cat >foo3.java <<EOF
+public class foo3 {
+  public static void main(String[[]] argv) {
+    A1 a1 = new A1(); A2 a2 = new A2(); A3 a3 = new A3();
+  }
+}
+EOF
+for i in 1 2 3; do
+  cat >A$i.java <<EOF
+public class A$i {
+  private int a;
+  public A$i () { a = 0; }
+};
+EOF
+
+  $LIBTOOL --tag=GCJ --mode=compile $GCJ $GCJFLAGS -c foo$i.java
+  $LIBTOOL --tag=GCJ --mode=compile $GCJ $GCJFLAGS -c A$i.java
+  $LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -o liba$i.la A$i.lo
+done
+AT_CHECK([$LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -o liba123.la A3.lo liba1.la liba2.la -rpath /notexist],
+	 [0],[ignore],[ignore])
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  AT_CHECK([$LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -static --main=foo$i -o main_static$EXEEXT foo$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  AT_CHECK([$LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS --main=foo$i -o main$EXEEXT foo$i.lo liba$conv.la],
+	   [0],[ignore],[ignore])
+  LT_AT_EXEC_CHECK([./main_static])
+  LT_AT_EXEC_CHECK([./main])
+done
+AT_CLEANUP
diff --git a/tests/ctor.at b/tests/ctor.at
new file mode 100644
index 0000000..29ec39a
--- /dev/null
+++ b/tests/ctor.at
@@ -0,0 +1,67 @@
+# ctor.at -- Test constructors via C++                        -*- Autotest -*-
+#
+#   Copyright (C) 2007, 2008 Free Software Foundation, Inc.
+#   Written by Noah Misch, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Constructors.])
+
+AT_SETUP([C++ static constructors])
+LT_AT_TAG([CXX])
+AT_KEYWORDS([libtool])
+
+AT_DATA(class.h,
+[[#define magic 0xaabbccdd
+class Foo {
+public:
+	Foo() { bar = magic; }
+	unsigned bar;
+};
+
+extern Foo instance;
+]])
+
+AT_DATA(libctor.cpp,
+[[#include "class.h"
+Foo instance;
+]])
+
+AT_DATA(main.cpp,
+[[#include "class.h"
+
+int main(void)
+{
+  return instance.bar != magic;
+}
+]])
+
+AT_CHECK([$LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS \
+	  -c libctor.cpp -o libctor.lo], [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS \
+	  -c main.cpp -o main.lo], [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS \
+	  libctor.lo -o libctor.la -rpath /none], [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS \
+	  main.lo libctor.la -o main$EXEEXT], [0], [ignore], [ignore])
+
+LT_AT_EXEC_CHECK([./main], [0])
+
+AT_CLEANUP
diff --git a/tests/cwrapper.at b/tests/cwrapper.at
new file mode 100644
index 0000000..0e5ecb7
--- /dev/null
+++ b/tests/cwrapper.at
@@ -0,0 +1,263 @@
+# cwrapper.at -- test cwrapper compliance with standards -*- Autotest -*-
+
+#   Copyright (C) 2009, 2010 Free Software Foundation, Inc.
+#   Written by Charles Wilson, 2009
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([cwrapper for uninstalled executables])
+AT_KEYWORDS([libtool])
+
+# make sure existing libtool is configured for shared libraries
+AT_CHECK([$LIBTOOL --features | grep 'disable shared libraries' && exit 77],
+	 [1], [ignore])
+
+AT_DATA([trivial.c],
+[[
+int main (void)
+{
+  return 0;
+}
+]])
+AT_DATA([liba.c],
+[[int liba_func1 (int arg)
+{
+  return arg + 1;
+}
+]])
+AT_DATA([usea.c],
+[[extern int liba_func1 (int arg);
+int main (void)
+{
+  int a = 2;
+  int b = liba_func1 (a);
+  if (b == 3) return 0;
+  return 1;
+}
+]])
+
+orig_CFLAGS=$CFLAGS
+orig_LIBTOOL=$LIBTOOL
+for restrictive_flags in '-Wall -Werror' '-std=c89 -Wall -Werror' '-std=c99 -Wall -Werror'; do
+  CFLAGS="$orig_CFLAGS $restrictive_flags"
+  sed "s/LTCFLAGS=.*/&' $restrictive_flags'/" < "$orig_LIBTOOL" > ./libtool
+  chmod +x libtool
+  LIBTOOL=./libtool
+
+  # Make sure $restrictive_flags do not cause a failure
+  # themselves (e.g. because a non-gcc compiler doesn't
+  # understand them).  Tru64 cc only fails when linking.
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS trivial.c || continue
+
+  AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c],
+           [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -version-info=0.0.0 -no-undefined -o liba.la -rpath /foo liba.lo],
+           [], [ignore], [ignore])
+  AT_CHECK([test -f liba.la])
+
+  AT_CHECK([$CC $CPPFLAGS $CFLAGS -c usea.c],
+           [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o usea$EXEEXT usea.$OBJEXT liba.la],
+           [], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([./usea], [0], [ignore], [ignore], [])
+done
+
+
+# Test run-time activation of wrapper debugging.
+# This is not part of the loop above, because we
+# need to check, not ignore, the output.
+CFLAGS="$orig_CFLAGS"
+LIBTOOL=$orig_LIBTOOL
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c],
+         [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-undefined -o liba.la -rpath /foo liba.lo],
+         [], [ignore], [ignore])
+AT_CHECK([test -f liba.la])
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c usea.c],
+         [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o usea$EXEEXT usea.$OBJEXT liba.la],
+         [], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./usea], [0], [ignore], [stderr], [--lt-debug])
+LT_AT_UNIFY_NL([stderr])
+AT_CHECK([grep 'libtool wrapper' stderr], [0], [ignore], [ignore])
+
+
+# Test compile-time activation of wrapper debugging.
+# We structure this test as a loop, so that we can 'break' out of it
+# if necessary -- even though the loop by design executes only once.
+for debugwrapper_flags in '-DLT_DEBUGWRAPPER'; do
+  CFLAGS="$orig_CFLAGS $debugwrapper_flags"
+  sed -e "s/LTCFLAGS=.*/&' $debugwrapper_flags'/" \
+      -e "s/^lt_option_debug=/lt_option_debug=1/" \
+    < "$orig_LIBTOOL" > ./libtool
+  LIBTOOL=./libtool
+
+  # Make sure $debugwrapper_flags do not cause a failure
+  # themselves (e.g. because a non-gcc compiler doesn't
+  # understand them).  Tru64 cc only fails when linking.
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS trivial.c || continue
+
+  AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c],
+           [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-undefined -o liba.la -rpath /foo liba.lo],
+           [], [ignore], [ignore])
+  AT_CHECK([test -f liba.la])
+
+  AT_CHECK([$CC $CPPFLAGS $CFLAGS -c usea.c],
+           [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o usea$EXEEXT usea.$OBJEXT liba.la],
+           [], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([./usea], [0], [ignore], [stderr], [])
+  LT_AT_UNIFY_NL([stderr])
+  AT_CHECK([grep 'libtool wrapper' stderr], [0], [ignore], [ignore])
+done
+
+
+AT_CLEANUP
+
+
+AT_SETUP([cwrapper string length])
+
+eval "`$LIBTOOL --config | $EGREP '^(objdir)='`"
+
+AT_DATA([liba.c],
+[[int liba_func1 (int arg)
+{
+  return arg + 1;
+}
+]])
+AT_DATA([usea.c],
+[[extern int liba_func1 (int arg);
+int main (void)
+{
+  int a = 2;
+  int b = liba_func1 (a);
+  if (b == 3) return 0;
+  return 1;
+}
+]])
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-undefined ]dnl
+	 [-o liba.la -rpath /foo liba.lo],
+	 [], [ignore], [ignore])
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c usea.c],
+	 [], [ignore], [ignore])
+
+
+# Make sure PATH is at least 250 chars, which should force line breaks
+# in lt-usea.c.
+
+dirpath=
+save_IFS=$IFS
+IFS=$PATH_SEPARATOR
+for dirpath in $PATH; do
+  IFS=$save_IFS
+  break
+done
+IFS=$save_IFS
+
+until $ECHO "PATH=$PATH" | grep 'PATH=.\{250\}'; do
+  PATH="$PATH$PATH_SEPARATOR$dirpath"
+done
+export PATH
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-fast-install ]dnl
+	 [-o usea$EXEEXT usea.$OBJEXT liba.la],
+	 [], [ignore], [ignore])
+
+# Skip if no cwrapper is generated.
+AT_CHECK([test -f $objdir/lt-usea.c || exit 77])
+
+# Try to make sure the test is relevant.
+AT_CHECK([grep ' *fputs' $objdir/lt-usea.c > /dev/null])
+# Check for no overly long fputs.
+AT_CHECK([grep ' *fputs.\{250\}' $objdir/lt-usea.c], [1])
+
+
+AT_CLEANUP
+
+
+AT_SETUP([cwrapper and installed shared libraries])
+AT_KEYWORDS([libtool])
+
+# make sure existing libtool is configured for shared libraries
+AT_CHECK([$LIBTOOL --features | grep 'enable shared libraries' || exit 77],
+	 [], [ignore])
+
+LDFLAGS="$LDFLAGS -no-undefined"
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+mkdir $inst $libdir $bindir
+
+# Build the library in a separate directory to avoid the special case
+# of loading from the current directory.
+
+mkdir foo
+cd foo
+# build and install "old" library version
+AT_DATA([a.c], [[
+int liba_ver (void) { return 1; }
+]])
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a.c],
+         [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -version-info=0.0.0 -o liba.la -rpath $libdir a.lo],
+         [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install $lt_INSTALL liba.la $libdir],
+         [], [ignore], [ignore])
+
+# build a new library version
+AT_DATA([a.c], [[
+int liba_ver (void) { return 2; }
+]])
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a.c],
+         [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -version-info=0.0.0 -o liba.la -rpath $libdir a.lo],
+         [], [ignore], [ignore])
+
+cd ..
+
+# build and run test application
+AT_DATA([m.c], [[
+extern int liba_ver (void);
+int main (void)
+{
+  int r = (liba_ver () == 2) ? 0 : 1;
+  return r;
+}
+]])
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c m.c], [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m1$EXEEXT m.$OBJEXT foo/liba.la],
+         [], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./m1], [0], [ignore], [ignore], [])
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m2$EXEEXT m.$OBJEXT foo/liba.la -L$inst/lib],
+         [], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./m2], [0], [ignore], [ignore], [])
+
+
+AT_CLEANUP
diff --git a/tests/darwin.at b/tests/darwin.at
new file mode 100644
index 0000000..b255abe
--- /dev/null
+++ b/tests/darwin.at
@@ -0,0 +1,446 @@
+# darwin.at - tests specific to Mac OS X
+#
+#   Copyright (C) 2008, 2009, 2011 Free Software Foundation, Inc.
+#   Written by Peter O'Gorman, 2008
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Mac OS X tests])
+AT_SETUP([darwin fat compile])
+noskip=:
+case "$host_os" in
+darwin*) ;;
+*) noskip=false ;;
+esac
+
+AT_DATA([simple.c] ,[[
+int main() { return 0;}
+]])
+
+$noskip && {
+$CC $CPPFLAGS $CFLAGS -arch ppc -arch i386 -o simple simple.c 2>&1 > /dev/null || noskip=false
+rm -f simple 
+}
+
+AT_CHECK([$noskip || (exit 77)])
+
+AT_DATA([foo.c],[[
+int x=0;
+]])
+
+AT_DATA([baz.c],[[
+int y=0;
+]])
+
+AT_DATA([bar.c],[[
+extern int x;
+int bar(void);
+int bar() { return x;}
+]])
+
+AT_DATA([main.c],[[
+extern int x;
+extern int y;
+
+int main() {
+return x+y;
+}
+]])
+
+mkdir bin
+AT_DATA([bin/basename],[[
+#! /bin/sh
+
+usage="usage: $0 argument"
+if test $# != 1; then
+                  echo $usage >&2
+                  exit 1
+fi
+
+echo $1 | sed "s,^.*/,,"
+]])
+
+chmod +x bin/basename
+save_PATH=$PATH
+PATH=`pwd`/bin:$PATH
+export PATH
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o foo.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 foo.c],[0],[ignore],[ignore])
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o baz.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 baz.c],[0],[ignore],[ignore])
+
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS -arch ppc -arch i386 foo.lo baz.lo],[0],[ignore],[ignore])
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o bar.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 bar.c],[0],[ignore],[ignore])
+
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC  -o libbar.la $CPPFLAGS $CFLAGS $LDFLAGS -arch ppc -arch i386 bar.lo libfoo.la -rpath /nonexistent],[0],[ignore],[ignore])
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC $CC -c -o main.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 main.c],[0],[ignore],[ignore])
+
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC  -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS -arch ppc -arch i386 main.lo libbar.la],[0],[ignore],[ignore])
+
+PATH=$save_PATH
+AT_CLEANUP
+
+
+AT_SETUP([darwin concurrent library extraction])
+
+AT_DATA([foo.c], [[
+int foo (void) { return 0; }
+]])
+
+AT_DATA([bar.c], [[
+extern int foo1 (void);
+int bar (void) { return foo1 (); }
+]])
+cp bar.c baz.c
+
+objects=
+for obj in 1 2 3 4 5 6 7 8; do
+  sed "s/foo/foo$obj/" < foo.c > foo$obj.c
+  AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c foo$obj.c],
+	   [], [ignore], [ignore])
+  objects="$objects foo$obj.lo"
+done
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c bar.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c baz.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libfoo.la $objects],
+	 [], [ignore], [ignore])
+
+# Hypothesis: concurrent convenience archive extraction works.
+for i in 1 2 3 4 5; do
+  rm -f libbar.la libbaz.la
+  AT_CHECK([($LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS ]dnl
+	   [  -o libbar.la bar.lo -rpath /foo libfoo.la) & ]dnl
+	   [($LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS ]dnl
+	   [  -o libbaz.la baz.lo -rpath /foo libfoo.la) & ]dnl
+	   [wait; test -f libbar.la && test -f libbaz.la],
+	   [], [ignore], [ignore])
+done
+
+# Hypothesis: the lock is not used in dry run mode.
+eval "`$LIBTOOL --config | $EGREP '^(objdir)='`"
+# Next line is internal detail.
+lockfile=$objdir/libfoo.a.lock
+echo stamp > $lockfile
+AT_CHECK([$LIBTOOL --dry-run --mode=link $CC $CFLAGS $LDFLAGS ]dnl
+	 [ -o libbar.la bar.lo -rpath /foo libfoo.la],
+	 [], [ignore], [ignore])
+AT_CHECK([grep stamp $lockfile], [], [ignore])
+
+AT_CLEANUP
+
+AT_SETUP([darwin gdb debug information])
+
+AT_CHECK([gdb --version || (exit 77)],[ignore],[ignore],[ignore])
+
+AT_DATA([foo.c], [[
+int foo (void) { return 0; }
+]])
+
+AT_DATA([bar.c], [[
+extern int foo (void);
+int bar (void) { return foo (); }
+]])
+
+AT_DATA([main.c], [[
+extern int bar(void);
+
+int main() { return bar();}
+]])
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c bar.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c foo.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c main.c],
+	 [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libfoo.la foo.lo],
+	 [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS ]dnl
+	 [  -o libbar.la bar.lo -rpath /foo libfoo.la ],
+	 [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS ]dnl
+	 [  -o main main.lo libbar.la],[], [ignore], [ignore])
+AT_CHECK([echo quit | $LIBTOOL --mode=execute gdb main],
+	 [ignore], [ignore], [stderr])
+
+AT_CHECK([grep 'Could not find object file' stderr],[1],[ignore],[ignore])
+
+AT_XFAIL_IF([
+eval "`$LIBTOOL --config | $EGREP '^(whole_archive_flag_spec)='`"
+case $whole_archive_flag_spec:$host_os in
+:darwin*) : ;;
+*) false ;;
+esac ])
+
+# Remove any dSYM bundle
+rm -rf .libs/*.dSYM
+
+AT_CHECK([echo quit | $LIBTOOL --mode=execute gdb main],
+	 [ignore], [ignore], [stderr])
+AT_CHECK([grep 'Could not find object file' stderr],[1],[ignore],[ignore])
+
+AT_CLEANUP
+
+AT_SETUP([darwin ld warnings changing configure results])
+
+AT_DATA([configure.ac],
+[[AC_INIT([ld-stderr], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+AC_CONFIG_MACRO_DIR([m4])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+LT_INIT
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],[
+ACLOCAL_AMFLAGS = -I m4
+])
+LT_AT_LIBTOOLIZE([--copy --force])
+LT_AT_AUTORECONF([--force --install])
+LT_AT_CONFIGURE
+AT_CHECK([./libtool --config],[ignore],[stdout],[ignore])
+mv stdout expout
+LT_AT_CONFIGURE([LDFLAGS=-L/there/is/no/dir/here])
+AT_CHECK([./libtool --config],[ignore],[expout],[ignore])
+AT_CLEANUP
+
+AT_SETUP([darwin can lt_dlopen .dylib and .so files])
+
+AT_KEYWORDS([libltdl dylib])
+
+# This test requires shared library support.
+AT_CHECK([$LIBTOOL --features | grep 'enable shared libraries' || exit 77],
+	 [], [ignore])
+
+eval `$LIBTOOL --config | $EGREP '^shrext_cmds='`
+
+module=no
+eval shared_ext=\"$shrext_cmds\"
+module=yes
+eval module_ext=\"$shrext_cmds\"
+
+# Only bother with this test if module extension is different from
+# shared extension
+AT_CHECK([test "$shared_ext" != "$module_ext" || exit 77])
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+prefix=`pwd`/inst
+libdir=$prefix/lib
+bindir=$prefix/bin
+mkdir $prefix $libdir $bindir
+
+# This code is copied from the Autobook:
+# <http://sources.redhat.com/autobook/autobook/autobook_169.html>
+# so if it needs changes, be sure to notify the Autobook authors
+# about them.
+
+AT_DATA([simple-module.c],
+[[
+#include <stdio.h>
+
+#ifdef __cplusplus
+extern "C"
+#endif
+int
+run (const char *argument)
+{
+  printf ("Hello, %s!\n", argument);
+  return 0;
+}
+]])
+
+AT_DATA([ltdl-loader.c],
+[[
+#include <stdio.h>
+#include <stdlib.h>
+#ifndef EXIT_FAILURE
+#  define EXIT_FAILURE        1
+#  define EXIT_SUCCESS        0
+#endif
+
+#include <limits.h>
+#ifndef PATH_MAX
+#  define PATH_MAX 255
+#endif
+
+#include <string.h>
+#include <ltdl.h>
+
+#ifndef MODULE_PATH_ENV
+#  define MODULE_PATH_ENV        "MODULE_PATH"
+#endif
+
+typedef int entrypoint (const char *argument);
+
+/* Save and return a copy of the dlerror() error  message,
+   since the next API call may overwrite the original. */
+static char *dlerrordup (char *errormsg);
+
+int
+main (int argc, const char *argv[])
+{
+  char *errormsg = NULL;
+  lt_dlhandle module = NULL;
+  entrypoint *run = NULL;
+  int errors = 0;
+
+  if (argc != 3)
+    {
+      fprintf (stderr, "USAGE: main MODULENAME ARGUMENT\n");
+      exit (EXIT_FAILURE);
+    }
+
+  /* Initialise libltdl. */
+  errors = lt_dlinit ();
+
+  /* Set the module search path. */
+  if (!errors)
+    {
+      const char *path = getenv (MODULE_PATH_ENV);
+
+      if (path != NULL)
+        errors = lt_dlsetsearchpath (path);
+    }
+
+  /* Load the module. */
+  if (!errors)
+    module = lt_dlopenext (argv[1]);
+
+  /* Find the entry point. */
+  if (module)
+    {
+      run = (entrypoint *) lt_dlsym (module, "run");
+
+      /* In principle, run might legitimately be NULL, so
+         I don't use run == NULL as an error indicator
+         in general. */
+      errormsg = dlerrordup (errormsg);
+      if (errormsg != NULL)
+        {
+          errors = lt_dlclose (module);
+          module = NULL;
+        }
+    }
+  else
+    errors = 1;
+
+  /* Call the entry point function. */
+  if (!errors)
+    {
+      int result = (*run) (argv[2]);
+      if (result < 0)
+        errormsg = strdup ("module entry point execution failed");
+      else
+        printf ("\t=> %d\n", result);
+    }
+
+  /* Unload the module, now that we are done with it. */
+  if (!errors)
+    errors = lt_dlclose (module);
+
+  if (errors)
+    {
+      /* Diagnose the encountered error. */
+      errormsg = dlerrordup (errormsg);
+
+      if (!errormsg)
+        {
+          fprintf (stderr, "%s: dlerror() failed.\n", argv[0]);
+          return EXIT_FAILURE;
+        }
+    }
+
+  /* Finished with ltdl now. */
+  if (!errors)
+    if (lt_dlexit () != 0)
+      errormsg = dlerrordup (errormsg);
+
+  if (errormsg)
+    {
+      fprintf (stderr, "%s: %s.\n", argv[0], errormsg);
+      free (errormsg);
+      exit (EXIT_FAILURE);
+    }
+
+  return EXIT_SUCCESS;
+}
+
+/* Be careful to save a copy of the error message,
+   since the  next API call may overwrite the original. */
+static char *
+dlerrordup (char *errormsg)
+{
+  char *error = (char *) lt_dlerror ();
+  if (error && !errormsg)
+    errormsg = strdup (error);
+  return errormsg;
+}
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c simple-module.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o simple-module.la ]dnl
+	 [simple-module.lo -rpath $libdir -module -avoid-version],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libsimple-dylib.la ]dnl
+	 [simple-module.lo -rpath $libdir -avoid-version],
+	 [], [ignore], [ignore])
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c ltdl-loader.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o ltdl-loader$EXEEXT ]dnl
+	 [ltdl-loader.$OBJEXT -dlopen self $LIBLTDL],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp simple-module.la $libdir/simple-module.la], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp libsimple-dylib.la $libdir/libsimple-dylib.la], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=clean rm -f simple-module.la], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=clean rm -f libsimple-dylib.la], [], [ignore], [ignore])
+
+rm $libdir/simple-module.la
+rm $libdir/libsimple-dylib.la
+
+for dir in inst/lib "$libdir"; do
+  LT_AT_EXEC_CHECK([./ltdl-loader], [], [stdout], [ignore],
+	    [$dir/simple-module World])
+  AT_CHECK([grep "Hello, World" stdout], [], [ignore])
+  LT_AT_EXEC_CHECK([./ltdl-loader], [], [stdout], [ignore],
+	    [$dir/libsimple-dylib World])
+  AT_CHECK([grep "Hello, World" stdout], [], [ignore])
+done
+
+AT_CLEANUP
diff --git a/tests/defs.in b/tests/defs.in
new file mode 100644
index 0000000..d86bc66
--- /dev/null
+++ b/tests/defs.in
@@ -0,0 +1,1208 @@
+#! /bin/sh
+# Generated from tests/defs.m4sh by GNU Autoconf 2.68.
+
+# defs -- Defines for Libtool testing environment.
+#
+#   Copyright (C) 2003, 2004, 2005, 2007, 2008, 2009, 2010 Free Software
+#   Foundation, Inc.
+#   Written by Gord Matzigkeit, 1996
+#   Rewritten by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested=""
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   break 2
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${EGREP="@EGREP@"}
+: ${FGREP="@FGREP@"}
+: ${GREP="@GREP@"}
+: ${LN_S="@LN_S@"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="@SED@"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+    func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+    func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+    # Extract subdirectory from the argument.
+    func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
+    if test "X$func_dirname_result" = "X${1}"; then
+      func_dirname_result="${3}"
+    else
+      func_dirname_result="$func_dirname_result${2}"
+    fi
+    func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
+} # func_dirname_and_basename may be replaced by extended shell implementation
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+    case ${2} in
+      .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+      *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+    esac
+} # func_stripname may be replaced by extended shell implementation
+
+
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
+
+# The name of this program:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=${PATH_SEPARATOR-:}
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
+
+# Sed substitution that converts a w32 file name or path
+# which contains forward slashes, into one that contains
+# (escaped) backslashes.  A very naive implementation.
+lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$opt_dry_run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+    fi
+
+    $ECHO "$my_tmpdir"
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+    esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "$1" | $SED \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+      *)
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
+    fi
+}
+
+# func_tr_sh
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result.  All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+  case $1 in
+  [0-9]* | *[!a-zA-Z0-9_]*)
+    func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
+    ;;
+  * )
+    func_tr_sh_result=$1
+    ;;
+  esac
+}
+
+
+
+
+: ${AUTOCONF="autoconf"}
+: ${AUTORECONF="autoreconf"}
+: ${LIBTOOL="./libtool"}
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# Disable usage of config.site for autoconf, unless DJGPP is present.
+# The DJGPP port of autoconf requires config.site, to work correctly.
+if test -z "$DJGPP"; then
+    CONFIG_SITE=/nonexistent
+fi
+
+# How verbose should we be?  Default is test output in log file.
+# Setting VERBOSE=debug puts the shell in debug mode.
+opt_debug=:
+case "$VERBOSE" in
+DEBUG | debug )
+  opt_debug='set -x'
+  $opt_debug
+  ;;
+esac
+
+if test -z "$srcdir"; then
+  srcdir=`$ECHO "$0" | $SED "$dirname; s,/tests\$,,"`
+  test "$srcdir" = "$0" && srcdir=.
+fi
+
+# func_msg arg...
+# Echo message with prefix.
+func_msg ()
+{
+    func_echo "=== " ${1+"$@"}
+}
+
+# func_skip arg...
+# Echo message to standard error, and skip the rest of this test.
+func_skip ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_SKIP
+}
+
+# func_fail arg...
+# Echo message to standard error, and fail this test.
+func_fail ()
+{
+    func_fatal_error ${1+"$@"}
+}
+
+# func_get_config varname_list src [failp] [regex]
+func_get_config ()
+{
+  $opt_debug
+  my_varname_list="$1"
+  my_src="$2"
+  my_failp="false";  test -z "$3" || my_failp=:
+  my_regex="$4"
+
+  my_exitp=false
+  if test -z "$my_regex"; then
+    my_regex="^("
+    my_build_regex=:
+  else
+    my_build_regex=false
+  fi
+  my_first=:
+
+  for my_varname in $my_varname_list; do
+    if $my_build_regex; then
+      $my_first || my_regex="$my_regex|"
+      my_first=false
+      my_regex="$my_regex$my_varname"
+    fi
+    eval $my_varname=NONE
+  done
+  $my_build_regex && my_regex="$my_regex)="
+  eval `eval "$my_src" | eval "$EGREP \"$my_regex\""`
+
+  for my_varname in $my_varname_list; do
+    if eval test x\"\$$my_varname\" = xNONE; then
+      func_error "$my_varname not set in \`$my_src'"
+      $my_failp && my_exitp=:
+    fi
+  done
+
+  $my_exitp && exit $EXIT_FAILURE
+}
+
+
+# Extract some variables from the libtool configuration.
+func_get_config "objext
+objdir
+CC
+host
+host_os
+host_alias
+build
+build_alias" "$LIBTOOL --config" ": fatal"
+
+
+# func_mkprefixdir
+func_mkprefixdir ()
+{
+    $opt_debug
+    # An absolute path to a test installation directory.
+    func_mkdir_p "$prefix"
+    prefix=`cd $prefix && pwd`
+}
+
+# func_rmprefixdir
+func_rmprefixdir ()
+{
+    $opt_debug
+    test -d $prefix && rm -rf $prefix
+    prefix=NONE
+}
+
+# func_cd dir
+# Make sure a directory exists, and then change to it.
+func_cd ()
+{
+    $opt_debug
+    my_dir="$1"
+
+    # Maybe we have a VPATH build, in which case, create a new subdir.
+    func_mkdir_p "$my_dir"
+
+    # Change to our build directory.
+    cd "$my_dir" || func_fatal_error "couldn't cd to \`$my_dir'"
+}
+
+
+# func_require prereq file [...]
+# If FILE does not exist, give a fatal error regarding running PREREQ first.
+func_require ()
+{
+    $opt_debug
+    my_prereq="$1"; shift
+    my_files=${1+"$@"}
+
+    for my_file in $my_files; do
+      test -f "$my_file" \
+        || func_skip "You must run ${my_prereq}.test before running $0"
+    done
+}
+
+# func_configure_nofail [args ...]
+# Configure the demonstration.
+func_configure_nofail ()
+{
+    $opt_debug
+    my_args=${1+"$@"}
+    func_dirname_and_basename "`pwd`"
+    my_dir=$func_basename_result
+    my_testdir="$srcdir/tests/$my_dir"
+    conf_status=$EXIT_FAILURE
+
+    test -n "$my_args" && my_args=" $my_args"
+    my_args="--srcdir="\""$my_testdir"\"" --prefix="\""$prefix"\""$my_args"
+    test -n "$host_alias" && my_args="$my_args --host=\"$host_alias\""
+    test -n "$build_alias" && my_args="$my_args --build=\"$build_alias\""
+
+    func_msg "Configuring in $my_dir"
+
+    test -f "$my_testdir/configure" || ${AUTORECONF} --force --install $my_testdir
+    if test -f "$my_testdir/configure"; then
+
+      eval func_msg $SHELL "$my_testdir/configure" $my_args
+      if eval $SHELL "$my_testdir/configure" $my_args; then
+	conf_status=$EXIT_SUCCESS
+      else
+	func_msg "FAILED: Configuring in $my_testdir"
+	ls -ltr $my_testdir
+      fi
+    fi
+}
+
+# func_configure [args ...]
+# Configure the demonstration, fail on error.
+func_configure ()
+{
+    func_configure_nofail ${1+"$@"}
+    if test "$conf_status" -eq "$EXIT_FAILURE"; then
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_check_static_shared staticp sharedp
+# Determine whether the generated libtool script is configured properly
+# for the expected STATICP and SHAREDP library building
+func_check_static_shared ()
+{
+    $opt_debug
+    my_staticp="$1"
+    my_sharedp="$2"
+
+    if func_grep "^build_old_libs=$staticp" libtool &&
+       func_grep "^build_libtool_libs=$sharedp" libtool; then :
+    else
+      rm -f Makefile
+      exit $EXIT_FAIL
+    fi
+}
+
+
+# func_make [args ...]
+# Do the actual build.
+func_make ()
+{
+    $opt_debug
+    my_args=${1+"$@"}
+    func_dirname_and_basename "`pwd`"
+    func_msg "Running \`$MAKE $my_args' in $func_basename_result"
+
+    eval $MAKE $my_args || exit $EXIT_FAIL
+}
+
+
+# func_distclean
+# Possibly clean up the distribution.
+func_make_distclean ()
+{
+    $opt_debug
+    if test -f Makefile; then
+      func_make distclean
+    fi
+    rm -rf autom4te.cache config.cache
+}
+
+
+# func_make_uninstall
+# See that there were no files leftover in $prefix.
+# Ignore dotfiles, so that .nfsXXX files don't screw up the test.
+func_make_uninstall ()
+{
+    $opt_debug
+    func_make uninstall
+
+    leftovers=`find $prefix ! -type d ! -name '.*' -print`
+    if test -n "$leftovers"; then
+      func_msg "Leftover after make uninstall:"
+      ls -l $leftovers
+      exit 1
+    fi
+}
+
+
+# func_exec_init mode
+func_exec_init ()
+{
+    $opt_debug
+    func_dirname_and_basename "`pwd`"
+    func_msg "Executing $1 programs in $func_basename_result"
+
+    # Windows hosts search for dlls in the command path
+    PATH=$prefix/lib:$PATH
+
+    exec_status=$EXIT_SUCCESS
+}
+
+# func_exec_check program [msg ...]
+# Check to see if PROGRAM was built. If not display MSG.
+func_exec_check ()
+{
+    $opt_debug
+    my_program="$1"
+
+    if test -f "$my_program"; then :
+    else
+      shift
+      func_error "$0: $my_program did not build ${1+$@}"
+      exec_status=$EXIT_FAILURE
+    fi
+}
+
+# func_exec program [exp_output] [msg ...]
+# Check to see if PROGRAM really runs, and produces EXP_OUTPUT if given.
+# If not display MSG.
+func_exec ()
+{
+    $opt_debug
+    my_program="$1"
+    my_exp_output="$2"
+    func_dirname_and_basename "`pwd`"
+    my_dir=$func_basename_result
+
+    test -n "$my_exp_output" \
+      && my_exp_output="| $EGREP -e "\""$my_exp_output"\"
+
+    if eval $my_program $my_exp_output; then :
+    else
+      shift
+      test "x$1" = x || shift
+      func_error "$0: cannot execute $my_program ${1+$@}"
+
+      if test "$build" != "$host"; then
+        func_msg "This may be ok since you seem to be cross-compiling."
+	exec_status=$EXIT_SKIP
+      else
+	# Simple check to see if they are superuser.
+	if test $exec_status = $EXIT_FAILURE || test -w /; then :
+	else
+	  func_msg "You may need to run $0 as the superuser."
+	fi
+	exec_status=$EXIT_FAILURE
+      fi
+    fi
+}
+
+# Shared global variables for test scripts
+prefix=./_inst-`echo "$0" | sed 's,.*/,,; s,-.*,,'`
+srcdir=`cd $srcdir && pwd`
+m4dir=$srcdir/libltdl/m4
+auxdir=$srcdir/libltdl/config
+scripts="$auxdir/ltmain.m4sh $srcdir/libtoolize.m4sh"
+
+# Unset some MAKE... variables that may cause $MAKE to act like a
+# recursively invoked sub-make.  Any $MAKE invocation in a test is
+# conceptually an independent invocation.
+unset MFLAGS MAKEFLAGS MAKELEVEL __MKLVL__ MAKE_JOBS_FIFO
+
+# On AIX, shared libraries remain loaded in memory after use if they
+# are world-readable, until root issues slibclean.  On NFS, this causes
+# a testsuite rerun to fail to clean up test group directories.  Avoid
+# this with a suitable umask.  Do not do this on other systems, for
+# example HP-UX suffers unless shared libraries are mode 555.
+case $host_os in
+aix*) umask o-rwx ;;
+esac
+
+func_msg "Running $progname"
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+
diff --git a/tests/defs.m4sh b/tests/defs.m4sh
new file mode 100644
index 0000000..b56426f
--- /dev/null
+++ b/tests/defs.m4sh
@@ -0,0 +1,369 @@
+AS_INIT[]m4_divert_push([HEADER-COPYRIGHT])
+# defs -- Defines for Libtool testing environment.
+#
+#   Copyright (C) 2003, 2004, 2005, 2007, 2008, 2009, 2010 Free Software
+#   Foundation, Inc.
+#   Written by Gord Matzigkeit, 1996
+#   Rewritten by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+m4_divert_pop
+m4_include([general.m4sh])
+
+M4SH_VERBATIM([[
+: ${AUTOCONF="autoconf"}
+: ${AUTORECONF="autoreconf"}
+: ${LIBTOOL="./libtool"}
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e 1s/^X//"
+
+# Disable usage of config.site for autoconf, unless DJGPP is present.
+# The DJGPP port of autoconf requires config.site, to work correctly.
+if test -z "$DJGPP"; then
+    CONFIG_SITE=/nonexistent
+fi
+
+# How verbose should we be?  Default is test output in log file.
+# Setting VERBOSE=debug puts the shell in debug mode.
+opt_debug=:
+case "$VERBOSE" in
+DEBUG | debug )
+  opt_debug='set -x'
+  $opt_debug
+  ;;
+esac
+
+if test -z "$srcdir"; then
+  srcdir=`$ECHO "$0" | $SED "$dirname; s,/tests\$,,"`
+  test "$srcdir" = "$0" && srcdir=.
+fi
+
+# func_msg arg...
+# Echo message with prefix.
+func_msg ()
+{
+    func_echo "=== " ${1+"$@"}
+}
+
+# func_skip arg...
+# Echo message to standard error, and skip the rest of this test.
+func_skip ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_SKIP
+}
+
+# func_fail arg...
+# Echo message to standard error, and fail this test.
+func_fail ()
+{
+    func_fatal_error ${1+"$@"}
+}
+
+# func_get_config varname_list src [failp] [regex]
+func_get_config ()
+{
+  $opt_debug
+  my_varname_list="$1"
+  my_src="$2"
+  my_failp="false";  test -z "$3" || my_failp=:
+  my_regex="$4"
+
+  my_exitp=false
+  if test -z "$my_regex"; then
+    my_regex="^("
+    my_build_regex=:
+  else
+    my_build_regex=false
+  fi
+  my_first=:
+
+  for my_varname in $my_varname_list; do
+    if $my_build_regex; then
+      $my_first || my_regex="$my_regex|"
+      my_first=false
+      my_regex="$my_regex$my_varname"
+    fi
+    eval $my_varname=NONE
+  done
+  $my_build_regex && my_regex="$my_regex)="
+  eval `eval "$my_src" | eval "$EGREP \"$my_regex\""`
+
+  for my_varname in $my_varname_list; do
+    if eval test x\"\$$my_varname\" = xNONE; then
+      func_error "$my_varname not set in \`$my_src'"
+      $my_failp && my_exitp=:
+    fi
+  done
+
+  $my_exitp && exit $EXIT_FAILURE
+}
+
+
+# Extract some variables from the libtool configuration.
+func_get_config "objext
+objdir
+CC
+host
+host_os
+host_alias
+build
+build_alias" "$LIBTOOL --config" ": fatal"
+
+
+# func_mkprefixdir
+func_mkprefixdir ()
+{
+    $opt_debug
+    # An absolute path to a test installation directory.
+    func_mkdir_p "$prefix"
+    prefix=`cd $prefix && pwd`
+}
+
+# func_rmprefixdir
+func_rmprefixdir ()
+{
+    $opt_debug
+    test -d $prefix && rm -rf $prefix
+    prefix=NONE
+}
+
+# func_cd dir
+# Make sure a directory exists, and then change to it.
+func_cd ()
+{
+    $opt_debug
+    my_dir="$1"
+
+    # Maybe we have a VPATH build, in which case, create a new subdir.
+    func_mkdir_p "$my_dir"
+
+    # Change to our build directory.
+    cd "$my_dir" || func_fatal_error "couldn't cd to \`$my_dir'"
+}
+
+
+# func_require prereq file [...]
+# If FILE does not exist, give a fatal error regarding running PREREQ first.
+func_require ()
+{
+    $opt_debug
+    my_prereq="$1"; shift
+    my_files=${1+"$@"}
+
+    for my_file in $my_files; do
+      test -f "$my_file" \
+        || func_skip "You must run ${my_prereq}.test before running $0"
+    done
+}
+
+# func_configure_nofail [args ...]
+# Configure the demonstration.
+func_configure_nofail ()
+{
+    $opt_debug
+    my_args=${1+"$@"}
+    func_dirname_and_basename "`pwd`"
+    my_dir=$func_basename_result
+    my_testdir="$srcdir/tests/$my_dir"
+    conf_status=$EXIT_FAILURE
+
+    test -n "$my_args" && my_args=" $my_args"
+    my_args="--srcdir="\""$my_testdir"\"" --prefix="\""$prefix"\""$my_args"
+    test -n "$host_alias" && my_args="$my_args --host=\"$host_alias\""
+    test -n "$build_alias" && my_args="$my_args --build=\"$build_alias\""
+
+    func_msg "Configuring in $my_dir"
+
+    test -f "$my_testdir/configure" || ${AUTORECONF} --force --install $my_testdir
+    if test -f "$my_testdir/configure"; then
+
+      eval func_msg $SHELL "$my_testdir/configure" $my_args
+      if eval $SHELL "$my_testdir/configure" $my_args; then
+	conf_status=$EXIT_SUCCESS
+      else
+	func_msg "FAILED: Configuring in $my_testdir"
+	ls -ltr $my_testdir
+      fi
+    fi
+}
+
+# func_configure [args ...]
+# Configure the demonstration, fail on error.
+func_configure ()
+{
+    func_configure_nofail ${1+"$@"}
+    if test "$conf_status" -eq "$EXIT_FAILURE"; then
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_check_static_shared staticp sharedp
+# Determine whether the generated libtool script is configured properly
+# for the expected STATICP and SHAREDP library building
+func_check_static_shared ()
+{
+    $opt_debug
+    my_staticp="$1"
+    my_sharedp="$2"
+
+    if func_grep "^build_old_libs=$staticp" libtool &&
+       func_grep "^build_libtool_libs=$sharedp" libtool; then :
+    else
+      rm -f Makefile
+      exit $EXIT_FAIL
+    fi
+}
+
+
+# func_make [args ...]
+# Do the actual build.
+func_make ()
+{
+    $opt_debug
+    my_args=${1+"$@"}
+    func_dirname_and_basename "`pwd`"
+    func_msg "Running \`$MAKE $my_args' in $func_basename_result"
+
+    eval $MAKE $my_args || exit $EXIT_FAIL
+}
+
+
+# func_distclean
+# Possibly clean up the distribution.
+func_make_distclean ()
+{
+    $opt_debug
+    if test -f Makefile; then
+      func_make distclean
+    fi
+    rm -rf autom4te.cache config.cache
+}
+
+
+# func_make_uninstall
+# See that there were no files leftover in $prefix.
+# Ignore dotfiles, so that .nfsXXX files don't screw up the test.
+func_make_uninstall ()
+{
+    $opt_debug
+    func_make uninstall
+
+    leftovers=`find $prefix ! -type d ! -name '.*' -print`
+    if test -n "$leftovers"; then
+      func_msg "Leftover after make uninstall:"
+      ls -l $leftovers
+      exit 1
+    fi
+}
+
+
+# func_exec_init mode
+func_exec_init ()
+{
+    $opt_debug
+    func_dirname_and_basename "`pwd`"
+    func_msg "Executing $1 programs in $func_basename_result"
+
+    # Windows hosts search for dlls in the command path
+    PATH=$prefix/lib:$PATH
+
+    exec_status=$EXIT_SUCCESS
+}
+
+# func_exec_check program [msg ...]
+# Check to see if PROGRAM was built. If not display MSG.
+func_exec_check ()
+{
+    $opt_debug
+    my_program="$1"
+
+    if test -f "$my_program"; then :
+    else
+      shift
+      func_error "$0: $my_program did not build ${1+$@}"
+      exec_status=$EXIT_FAILURE
+    fi
+}
+
+# func_exec program [exp_output] [msg ...]
+# Check to see if PROGRAM really runs, and produces EXP_OUTPUT if given.
+# If not display MSG.
+func_exec ()
+{
+    $opt_debug
+    my_program="$1"
+    my_exp_output="$2"
+    func_dirname_and_basename "`pwd`"
+    my_dir=$func_basename_result
+
+    test -n "$my_exp_output" \
+      && my_exp_output="| $EGREP -e "\""$my_exp_output"\"
+
+    if eval $my_program $my_exp_output; then :
+    else
+      shift
+      test "x$1" = x || shift
+      func_error "$0: cannot execute $my_program ${1+$@}"
+
+      if test "$build" != "$host"; then
+        func_msg "This may be ok since you seem to be cross-compiling."
+	exec_status=$EXIT_SKIP
+      else
+	# Simple check to see if they are superuser.
+	if test $exec_status = $EXIT_FAILURE || test -w /; then :
+	else
+	  func_msg "You may need to run $0 as the superuser."
+	fi
+	exec_status=$EXIT_FAILURE
+      fi
+    fi
+}
+
+# Shared global variables for test scripts
+prefix=./_inst-`echo "$0" | sed 's,.*/,,; s,-.*,,'`
+srcdir=`cd $srcdir && pwd`
+m4dir=$srcdir/libltdl/m4
+auxdir=$srcdir/libltdl/config
+scripts="$auxdir/ltmain.m4sh $srcdir/libtoolize.m4sh"
+
+# Unset some MAKE... variables that may cause $MAKE to act like a
+# recursively invoked sub-make.  Any $MAKE invocation in a test is
+# conceptually an independent invocation.
+unset MFLAGS MAKEFLAGS MAKELEVEL __MKLVL__ MAKE_JOBS_FIFO
+
+# On AIX, shared libraries remain loaded in memory after use if they
+# are world-readable, until root issues slibclean.  On NFS, this causes
+# a testsuite rerun to fail to clean up test group directories.  Avoid
+# this with a suitable umask.  Do not do this on other systems, for
+# example HP-UX suffers unless shared libraries are mode 555.
+case $host_os in
+aix*) umask o-rwx ;;
+esac
+
+func_msg "Running $progname"
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+]])
diff --git a/tests/demo-conf.test b/tests/demo-conf.test
new file mode 100755
index 0000000..1ef9fa2
--- /dev/null
+++ b/tests/demo-conf.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# demo-conf.test - try configuring the demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/demo"
+func_make_distclean
+func_configure
+func_check_static_shared "yes" "yes"
+
+exit 0
diff --git a/tests/demo-deplibs.test b/tests/demo-deplibs.test
new file mode 100755
index 0000000..2e4c99f
--- /dev/null
+++ b/tests/demo-deplibs.test
@@ -0,0 +1,38 @@
+#! /bin/sh
+# demo-deplibs.test - check whether the shared library check method is OK
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "demo-conf" "tests/demo/libhello.la"
+
+func_mkprefixdir
+func_cd "tests/demo"
+echo "linking a shared library against a static library"
+func_make "deplibs-check"
+func_exec_init "uninstalled"
+func_exec_check "hell0$EXEEXT" "check your deplibs_check_method"
+func_exec "./hell0$EXEEXT" "" "check your deplibs_check_method"
+
+exit $exec_status
diff --git a/tests/demo-exec.test b/tests/demo-exec.test
new file mode 100755
index 0000000..b586e94
--- /dev/null
+++ b/tests/demo-exec.test
@@ -0,0 +1,36 @@
+#! /bin/sh
+# demo-exec.test - check that programs in the ../demo subdirectory are viable
+#
+#   Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "demo-make" "tests/demo/hell$EXEEXT"
+
+func_rmprefixdir
+func_exec_init "uninstalled"
+func_exec "tests/demo/hell_static$EXEEXT" 'Welcome to GNU Hell'
+func_exec "tests/demo/hell$EXEEXT" 'Welcome to GNU Hell'
+func_exec "tests/demo/helldl$EXEEXT" '(Welcome to .*GNU Hell|unsupported)'
+
+exit $exec_status
diff --git a/tests/demo-hardcode.test b/tests/demo-hardcode.test
new file mode 100755
index 0000000..31b2e1d
--- /dev/null
+++ b/tests/demo-hardcode.test
@@ -0,0 +1,129 @@
+#! /bin/sh
+# demo-hardcode.test - check to see what the system linker hardcodes
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "demo-inst" "$prefix/lib/libhello.la"
+
+func_mkprefixdir
+func_cd "tests/demo"
+
+# Check to make sure we have a dynamic library.
+func_get_config "library_names" "cat ./libhello.la"
+test -z "$library_names" \
+  && func_skip "Exiting: demo/libhello.la is not a shared library"
+
+func_make "hardcode"
+
+# Extra tools we might need
+: ${DUMPSTABS=dumpstabs}
+
+# Suck in all the hardcode_* variable settings.
+func_msg "Finding libtool.m4's guesses at hardcoding values"
+func_get_config 'hardcode_direct
+hardcode_minus_L
+hardcode_shlibpath_var
+hardcode_libdir_flag_spec' "./libtool --config" ": fatal"
+
+echo "= Searching for hardcoded library directories in each program"
+for file in hc-*; do
+  case "$file" in
+  hc-direct)  expected="$hardcode_direct" ;;
+  hc-libpath) expected="$hardcode_shlibpath_var" ;;
+  hc-minusL)  expected="$hardcode_minus_L" ;;
+
+  hc-libflag)
+    if test -n "$hardcode_libdir_flag_spec"; then
+      expected=yes
+    else
+      expected=unsupported
+    fi
+    ;;
+
+  *)
+    continue
+    ;;
+  esac
+
+  # Discover whether the objdir really was hardcoded.
+  hardcoded=no
+
+  # Solaris cc may store the command line in a debugging section,
+  # which leads to false positives.  Unfortunately, Solaris strip
+  # is not capable to remove the section (unlike GNU binutils strip).
+  # So we use dumpstabs if it seems to work.
+  if { $DUMPSTABS -d $file; } >/dev/null 2>&1; then
+    if $DUMPSTABS -d $file 2>/dev/null | $FGREP "$objdir" >/dev/null 2>&1; then
+      hardcoded=yes
+    else
+      hardcoded=no
+    fi
+  # At least AIX fgrep doesn't work for binary files, and AIX also
+  # doesn't have strings(1), so we need this strange conversion
+  # (which only works on ASCII).
+  # AIX fgrep also has a limited line length, so we turn unprintable
+  # characters into newlines.
+  elif cat $file | (tr '\000-\037\200-\377' '\n' || cat) 2>/dev/null \
+	         | $FGREP "$objdir" > /dev/null 2>&1; then
+    hardcoded=yes
+  elif $FGREP "$objdir" $file > /dev/null 2>&1; then
+    # We retry fgrep without tr, in case the above lead to a false negative.
+    hardcoded=yes
+  elif (sed -e '1!d' $file | grep 'unsupported') >/dev/null 2>&1; then
+    hardcoded=unsupported
+  fi
+
+  # Check the result.
+  case "$hardcoded" in
+  yes)
+    if test $expected = yes; then
+      echo "$objdir was hardcoded in \`$file', as libtool expected"
+    else
+      echo "$objdir was hardcoded in \`$file', which fooled libtool" 1>&2
+      exit_status=1
+    fi
+    ;;
+
+  no)
+    if test $expected = no; then
+      echo "$objdir was not hardcoded in \`$file', as libtool expected"
+    else
+      echo "$objdir was not hardcoded in \`$file', which fooled libtool" 1>&2
+      exit_status=1
+    fi
+    ;;
+
+  unsupported)
+    if test $expected = unsupported; then
+      echo "\`$file' was not linked properly, as libtool expected"
+    else
+      echo "\`$file' was not linked properly, which fooled libtool" 1>&2
+      exit_status=1
+    fi
+    ;;
+  esac
+done
+
+exit $exit_status
diff --git a/tests/demo-inst.test b/tests/demo-inst.test
new file mode 100755
index 0000000..3bd5ea6
--- /dev/null
+++ b/tests/demo-inst.test
@@ -0,0 +1,38 @@
+#! /bin/sh
+# demo-inst.test - try installing from the demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "demo-make" "tests/demo/hell$EXEEXT"
+
+func_mkprefixdir
+func_cd "tests/demo"
+func_make "install"
+func_exec_init "installed"
+func_exec "$prefix/bin/hell_static$EXEEXT" 'Welcome to GNU Hell'
+func_exec "$prefix/bin/hell$EXEEXT" 'Welcome to GNU Hell'
+func_exec "$prefix/bin/helldl$EXEEXT" '(Welcome to .*GNU Hell|unsupported)'
+
+exit $status
diff --git a/tests/demo-make.test b/tests/demo-make.test
new file mode 100755
index 0000000..a1f9bfd
--- /dev/null
+++ b/tests/demo-make.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# demo-make.test - try building in the demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "demo-conf" "tests/demo/Makefile"
+
+func_rmprefixdir
+func_cd "tests/demo"
+func_make
+
+exit 0
diff --git a/tests/demo-nofast-exec.test b/tests/demo-nofast-exec.test
new file mode 100755
index 0000000..82e272d
--- /dev/null
+++ b/tests/demo-nofast-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-exec.test
diff --git a/tests/demo-nofast-inst.test b/tests/demo-nofast-inst.test
new file mode 100755
index 0000000..02e87c1
--- /dev/null
+++ b/tests/demo-nofast-inst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-inst.test
diff --git a/tests/demo-nofast-make.test b/tests/demo-nofast-make.test
new file mode 100755
index 0000000..c902d85
--- /dev/null
+++ b/tests/demo-nofast-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-make.test
diff --git a/tests/demo-nofast-unst.test b/tests/demo-nofast-unst.test
new file mode 100755
index 0000000..789a487
--- /dev/null
+++ b/tests/demo-nofast-unst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-unst.test
diff --git a/tests/demo-nofast.test b/tests/demo-nofast.test
new file mode 100755
index 0000000..6b50f4a
--- /dev/null
+++ b/tests/demo-nofast.test
@@ -0,0 +1,38 @@
+#! /bin/sh
+# demo-nofast.test - try configuring the ../demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/demo"
+func_make_distclean
+func_configure "--enable-fast-install=no"
+
+if func_grep '^hardcode_action=relink' libtool; then
+  rm -f Makefile
+  exit 77
+fi
+
+exit 0
diff --git a/tests/demo-noinst-link.test b/tests/demo-noinst-link.test
new file mode 100755
index 0000000..5e658b0
--- /dev/null
+++ b/tests/demo-noinst-link.test
@@ -0,0 +1,60 @@
+#! /bin/sh
+# demo-noinst-link.test - make sure we do not link with an installed
+#                         library when an uninstalled one is to be used
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_restore_files ()
+{
+    mv -f "$objdir"/temp/libs/* "$objdir"
+    mv -f "$objdir/temp/libhello.la" "$objdir/temp/hell$EXEEXT" .
+    rm -rf "$objdir/temp"
+}
+
+func_save_files ()
+{
+    func_mkdir_p "$objdir/temp/libs"
+    cp -f libhello.la "hell$EXEEXT" "$objdir/temp"
+    cp -f "$objdir"/* "$objdir"/temp/libs
+    trap "func_restore_files" 0 1 2 13 15
+}
+
+func_require "demo-inst" "$prefix/lib/libhello.la"
+
+func_mkprefixdir
+func_cd "tests/demo"
+func_save_files
+
+func_msg "removing \`libhello.la' and \`hell' from demo"
+rm -f libhello.la "hell$EXEEXT"
+
+status=$EXIT_SUCCESS
+func_msg "linking \`hell' with a broken \`demo/libhello.la'"
+if $MAKE "hell$EXEEXT" libhello_la_OBJECTS=hello.lo; then
+  func_msg "Succeeded: this means the installed library was used, which is wrong"
+  status=$EXIT_FAILURE
+fi
+
+exit $status
diff --git a/tests/demo-nopic-exec.test b/tests/demo-nopic-exec.test
new file mode 100755
index 0000000..82e272d
--- /dev/null
+++ b/tests/demo-nopic-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-exec.test
diff --git a/tests/demo-nopic-make.test b/tests/demo-nopic-make.test
new file mode 100755
index 0000000..c902d85
--- /dev/null
+++ b/tests/demo-nopic-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-make.test
diff --git a/tests/demo-nopic.test b/tests/demo-nopic.test
new file mode 100755
index 0000000..acceca6
--- /dev/null
+++ b/tests/demo-nopic.test
@@ -0,0 +1,56 @@
+#! /bin/sh
+# demo-nopic.test - try configuring the ../demo subdirectory
+#
+#   Copyright (C) 2003, 2004, 2010 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+case "$host" in
+hppa*|x86_64*|s390*)
+	func_skip "$host doesn't like non-PIC shared libs"
+	;;
+*-solaris*|*-sunos*)
+	func_skip "libtool does not build non-PIC shared libs on $host"
+	;;
+esac
+
+if test "$build" = "$host" && test -d "/etc/selinux"; then
+	_selinux=`getenforce 2>/dev/null || echo "Disabled"`
+	case "${_selinux}" in
+	*Enforcing)
+		_sebool_allow_execmod=`getsebool allow_execmod 2>/dev/null`
+		case "${_sebool_allow_execmod}" in
+			*off)
+				func_skip "SELinux policy disallows"
+				;;
+		esac
+		;;
+	esac
+fi
+
+func_rmprefixdir
+func_cd "tests/demo"
+func_make_distclean
+func_configure "--with-pic=no"
+
+exit 0
diff --git a/tests/demo-pic-exec.test b/tests/demo-pic-exec.test
new file mode 100755
index 0000000..82e272d
--- /dev/null
+++ b/tests/demo-pic-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-exec.test
diff --git a/tests/demo-pic-make.test b/tests/demo-pic-make.test
new file mode 100755
index 0000000..c902d85
--- /dev/null
+++ b/tests/demo-pic-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-make.test
diff --git a/tests/demo-pic.test b/tests/demo-pic.test
new file mode 100755
index 0000000..cce0184
--- /dev/null
+++ b/tests/demo-pic.test
@@ -0,0 +1,33 @@
+#! /bin/sh
+# demo-pic.test - try configuring the ../demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_rmprefixdir
+func_cd "tests/demo"
+func_make_distclean
+func_configure "--with-pic=yes"
+
+exit 0
diff --git a/tests/demo-relink.test b/tests/demo-relink.test
new file mode 100755
index 0000000..8310e46
--- /dev/null
+++ b/tests/demo-relink.test
@@ -0,0 +1,105 @@
+#! /bin/sh
+# demo-relink.test - check to see whether shlibpath overrides runpath
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_restore_files ()
+{
+    mv -f "$objdir"/temp/libs/* "$objdir"
+    mv -f "$objdir/temp/libhello.la" .
+    rm -rf "$objdir/temp"
+}
+
+func_save_files ()
+{
+    func_mkdir_p "$objdir/temp/libs"
+    cp -f libhello.la "$objdir/temp"
+    cp -f "$objdir"/libhello.* "$objdir/lt-hell$EXEEXT" "$objdir/temp/libs"
+    trap "func_restore_files" 0 1 2 13 15
+}
+
+func_require "demo-inst" "$prefix/lib/libhello.la"  "tests/demo/libhello.la"
+
+func_mkprefixdir
+func_cd "tests/demo"
+
+# Check to make sure we have a dynamic library.
+func_get_config "library_names" "cat libhello.la"
+test -z "$library_names" \
+  && func_skip "Exiting: demo/libhello.la is not a shared library"
+
+func_save_files
+
+func_get_config 'shlibpath_overrides_runpath
+hardcode_action
+hardcode_direct
+hardcode_into_libs' "./libtool --config" ": fatal"
+
+./hell$EXEEXT # so that it links on-demand if needed
+
+func_msg "removing libhello.la from demo"
+rm -f libhello.la "$objdir"/libhello.*
+
+func_msg "running demo/hell"
+if ./hell$EXEEXT; then
+  :
+elif test "x,$hardcode_action,$hardcode_direct" = x,relink,yes; then
+  func_msg "Ok, uninstalled programs fail after uninstalled libraries are removed."
+  func_msg "This works in other configurations, but not in this particular one."
+else
+  func_fail "Exiting: demo/hell does not run, maybe libhello was not installed"
+fi
+
+func_msg "linking a broken demo/libhello.la"
+func_make libhello.la libhello_la_OBJECTS=hello.lo \
+  || func_fail "Exiting: cannot link broken libhello.la"
+rm -f libhello.la
+
+func_msg "running demo/hell with broken libhello.la"
+if (./hell) 2>&1; then
+  func_msg "Exiting: demo/hell runs even though libhello.la is incomplete"
+  func_fail "shlibpath_overrides_runpath should be set to no"
+else
+  func_msg "Failed, as expected"
+fi
+
+if test "x$hardcode_action" = xrelink; then
+  func_msg "Exiting: install-time relinking is required"
+  exit $EXIT_SUCCESS
+fi
+
+if test "$shlibpath_overrides_runpath" != yes; then
+  rm -f $objdir/lt-hell$EXEEXT || exit $EXIT_FAILURE
+  cp $objdir/hell$EXEEXT $objdir/lt-hell$EXEEXT || exit $EXIT_FAILURE
+  func_msg "running demo/hell with installed libhello.la"
+  if ./hell; then
+    func_msg "Worked, as expected"
+  else
+    func_msg "shlibpath_overrides_runpath should be set to yes"
+    status=$EXIT_FAILURE
+  fi
+fi
+
+exit $status
diff --git a/tests/demo-shared-exec.test b/tests/demo-shared-exec.test
new file mode 100755
index 0000000..82e272d
--- /dev/null
+++ b/tests/demo-shared-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-exec.test
diff --git a/tests/demo-shared-inst.test b/tests/demo-shared-inst.test
new file mode 100755
index 0000000..02e87c1
--- /dev/null
+++ b/tests/demo-shared-inst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-inst.test
diff --git a/tests/demo-shared-make.test b/tests/demo-shared-make.test
new file mode 100755
index 0000000..c902d85
--- /dev/null
+++ b/tests/demo-shared-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-make.test
diff --git a/tests/demo-shared-unst.test b/tests/demo-shared-unst.test
new file mode 100755
index 0000000..789a487
--- /dev/null
+++ b/tests/demo-shared-unst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-unst.test
diff --git a/tests/demo-shared.test b/tests/demo-shared.test
new file mode 100755
index 0000000..422307b
--- /dev/null
+++ b/tests/demo-shared.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# demo-shared.test - try configuring the demo subdirectory for shared libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/demo"
+func_make_distclean
+func_configure "--disable-static"
+func_check_static_shared "no" "yes"
+
+exit 0
diff --git a/tests/demo-static-exec.test b/tests/demo-static-exec.test
new file mode 100755
index 0000000..82e272d
--- /dev/null
+++ b/tests/demo-static-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-exec.test
diff --git a/tests/demo-static-inst.test b/tests/demo-static-inst.test
new file mode 100755
index 0000000..02e87c1
--- /dev/null
+++ b/tests/demo-static-inst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-inst.test
diff --git a/tests/demo-static-make.test b/tests/demo-static-make.test
new file mode 100755
index 0000000..c902d85
--- /dev/null
+++ b/tests/demo-static-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-make.test
diff --git a/tests/demo-static-unst.test b/tests/demo-static-unst.test
new file mode 100755
index 0000000..789a487
--- /dev/null
+++ b/tests/demo-static-unst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/demo-unst.test
diff --git a/tests/demo-static.test b/tests/demo-static.test
new file mode 100755
index 0000000..59eb493
--- /dev/null
+++ b/tests/demo-static.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# demo-static.test - try configuring the demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/demo"
+func_make_distclean
+func_configure "--disable-shared"
+func_check_static_shared "yes" "no"
+
+exit 0
diff --git a/tests/demo-unst.test b/tests/demo-unst.test
new file mode 100755
index 0000000..9820879
--- /dev/null
+++ b/tests/demo-unst.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# demo-unst.test - try uninstalling in the demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "demo-inst" "$prefix/bin/hell$EXEEXT" "tests/demo/Makefile"
+
+func_mkprefixdir
+func_cd "tests/demo"
+func_make_uninstall
+
+exit 0
diff --git a/tests/demo/Makefile.am b/tests/demo/Makefile.am
new file mode 100644
index 0000000..a3c6144
--- /dev/null
+++ b/tests/demo/Makefile.am
@@ -0,0 +1,178 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005, 2010 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS  = -I ../../libltdl/m4
+AM_CPPFLAGS	 = -I$(top_srcdir)/../..
+
+# Build a libtool library, libhello.la for installation in libdir.
+lib_LTLIBRARIES = libhello.la
+libhello_la_SOURCES = hello.c foo.c
+libhello_la_LIBADD = $(LIBM)
+libhello_la_LDFLAGS = -no-undefined -version-info 3:12:1
+libhello_la_AM_CPPFLAGS = $(AM_CPPFLAGS) -DBUILDING_LIBHELLO
+
+include_HEADERS = foo.h
+
+if BINARY_HELLDL
+BUILD_helldl = helldl
+else
+BUILD_helldl =
+endif
+
+bin_PROGRAMS = hell hell_static $(BUILD_helldl)
+
+# Build hell from main.c and libhello.la
+hell_SOURCES = main.c
+hell_LDADD = libhello.la
+
+# Create a statically linked version of hell.
+hell_static_SOURCES = main.c
+hell_static_LDADD = libhello.la
+hell_static_LDFLAGS = $(STATIC)
+
+if BINARY_HELLDL
+
+# Create a version of hell that does a preloaded dlopen.
+helldl_SOURCES = dlmain.c
+helldl_LDFLAGS = -export-dynamic -dlpreopen libhello.la
+helldl_DEPENDENCIES = libhello.la
+
+else
+
+bin_SCRIPTS = helldl
+# create a script that says that -dlopen is not supported
+helldl helldl$(EXEEXT):
+	rm -f $@
+	echo '#! /bin/sh' > $@
+	echo '-dlopen is unsupported' >> $@
+	chmod +x $@
+endif
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+#----------------------------------------------------------------------
+# The following declarations are only used in the testsuite:
+#----------------------------------------------------------------------
+
+hardcode_tests = hc-direct hc-libflag hc-libpath hc-minusL
+CLEANFILES = $(hardcode_tests)
+
+# Unfortunately, in order to test libtool thoroughly, we need access
+# to its private directory.
+objdir = `$(LIBTOOL) --config | sed -n -e 's/^objdir=\(.*\)$$/\1/p'`
+
+# The following rules are only for the libtool demo and tests.
+# Regenerate our acinclude.m4 only if it doesn't exist.
+$(srcdir)/acinclude.m4:
+	rm -f $(srcdir)/acinclude.m4
+	cd $(srcdir) && $(LN_S) ../libtool.m4 acinclude.m4
+
+
+# Test programs to see what gets hardcoded.
+.PHONY: hardcode
+hardcode: $(hardcode_tests)
+SET_HARDCODE_FLAGS = \
+  eval `$(LIBTOOL) --config | sed -n -e '/^hardcode_.*=/p; /^wl=/p'`
+hc-direct: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@rm -f hc-direct
+	@echo "You may ignore any linking errors from the following command:"
+	@shlib=./$(objdir)/libhello.a; \
+	  eval "`grep '^library_names' libhello.la`"; \
+	  for lib in $$library_names; do \
+	    shlib="./$(objdir)/$$lib"; \
+	  done; \
+	  $(SET_HARDCODE_FLAGS); \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$shlib $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$shlib $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+hc-libflag: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@$(SET_HARDCODE_FLAGS); \
+	  libdir=`pwd`/$(objdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  if test -z "$$flag"; then \
+	    echo "echo unsupported > $@"; \
+	    echo unsupported > $@ || status="$$?"; \
+	  else \
+	    echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$flag -L$(libdir) -lhello $(LIBS) $(LIBM)"; \
+	    $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$flag -L$(libdir) -lhello $(LIBS) $(LIBM) || status="$$?"; \
+	  fi; \
+	  exit $$status
+
+hc-libpath: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@rm -f hc-libpath
+	@echo "You may ignore any linking errors from the following command:"
+	@$(SET_HARDCODE_FLAGS); \
+	  eval `$(LIBTOOL) --config | grep '^shlibpath_var='`; \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$$shlibpath_var=./$(objdir) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$$shlibpath_var=./$(objdir) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+hc-minusL: $(hell_OBJECTS) $(hell_DEPENDENCIES)
+	@rm -f hc-minusL
+	@$(SET_HARDCODE_FLAGS); \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -L./$(objdir) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -L./$(objdir) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+# This is one of the essential tests for deplibs_check_method=pass_all.
+# If this one passes with pass_all, it is likely that pass_all works
+EXTRA_LIBRARIES = libhell0.a
+libhell0_a_SOURCES =
+libhell0_a_LIBADD = hello.$(OBJEXT) foo.$(OBJEXT)
+EXTRA_LTLIBRARIES = libhell1.la libhell2.la
+libhell1_la_SOURCES = hell1.c
+libhell1_la_LIBADD = -L. -lhell0
+libhell1_la_LDFLAGS = -no-undefined -rpath $(libdir)
+libhell1_la_DEPENDENCIES = libhell0.a
+libhell2_la_SOURCES = hell2.c
+libhell2_la_LIBADD = -L. -lhell0
+libhell2_la_LDFLAGS = -no-undefined -rpath $(libdir)
+libhell2_la_DEPENDENCIES = libhell0.a
+EXTRA_PROGRAMS = hell0
+hell0_SOURCES = main.c
+hell0_LDADD = libhell1.la libhell2.la $(LIBM)
+
+# 'hell0' in EXTRA_PROGRAMS gets translated to 'hell0.exe'; but we
+# must explicitly list the wrapper script 'hell0'.  (bin_PROGRAMS
+# are handled seamlessly by automake rules; the extra step is only
+# necessary for EXTRA_PROGRAMS)
+CLEANFILES += $(EXTRA_LIBRARIES) $(EXTRA_LTLIBRARIES) $(EXTRA_PROGRAMS) hell0
+
+deplibs-check: hell0$(EXEEXT)
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
diff --git a/tests/demo/Makefile.in b/tests/demo/Makefile.in
new file mode 100644
index 0000000..075a4fa
--- /dev/null
+++ b/tests/demo/Makefile.in
@@ -0,0 +1,974 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = hell$(EXEEXT) hell_static$(EXEEXT) $(am__EXEEXT_1)
+EXTRA_PROGRAMS = hell0$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
+	$(srcdir)/../../libltdl/config/config.guess \
+	$(srcdir)/../../libltdl/config/config.sub \
+	$(srcdir)/../../libltdl/config/install-sh \
+	$(srcdir)/../../libltdl/config/ltmain.sh \
+	$(srcdir)/../../libltdl/config/missing $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	../../libltdl/config/compile ../../libltdl/config/config.guess \
+	../../libltdl/config/config.sub ../../libltdl/config/depcomp \
+	../../libltdl/config/install-sh ../../libltdl/config/ltmain.sh \
+	../../libltdl/config/mdate-sh ../../libltdl/config/missing \
+	../../libltdl/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+ARFLAGS = cru
+libhell0_a_AR = $(AR) $(ARFLAGS)
+libhell0_a_DEPENDENCIES = hello.$(OBJEXT) foo.$(OBJEXT)
+am_libhell0_a_OBJECTS =
+libhell0_a_OBJECTS = $(am_libhell0_a_OBJECTS)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+	"$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+am_libhell1_la_OBJECTS = hell1.lo
+libhell1_la_OBJECTS = $(am_libhell1_la_OBJECTS)
+libhell1_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libhell1_la_LDFLAGS) $(LDFLAGS) -o $@
+am_libhell2_la_OBJECTS = hell2.lo
+libhell2_la_OBJECTS = $(am_libhell2_la_OBJECTS)
+libhell2_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libhell2_la_LDFLAGS) $(LDFLAGS) -o $@
+am__DEPENDENCIES_1 =
+libhello_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_libhello_la_OBJECTS = hello.lo foo.lo
+libhello_la_OBJECTS = $(am_libhello_la_OBJECTS)
+libhello_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libhello_la_LDFLAGS) $(LDFLAGS) -o $@
+@BINARY_HELLDL_TRUE@am__EXEEXT_1 = helldl$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+am_hell_OBJECTS = main.$(OBJEXT)
+hell_OBJECTS = $(am_hell_OBJECTS)
+hell_DEPENDENCIES = libhello.la
+am_hell0_OBJECTS = main.$(OBJEXT)
+hell0_OBJECTS = $(am_hell0_OBJECTS)
+hell0_DEPENDENCIES = libhell1.la libhell2.la $(am__DEPENDENCIES_1)
+am_hell_static_OBJECTS = main.$(OBJEXT)
+hell_static_OBJECTS = $(am_hell_static_OBJECTS)
+hell_static_DEPENDENCIES = libhello.la
+hell_static_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(hell_static_LDFLAGS) $(LDFLAGS) -o $@
+am__helldl_SOURCES_DIST = dlmain.c
+@BINARY_HELLDL_TRUE@am_helldl_OBJECTS = dlmain.$(OBJEXT)
+helldl_OBJECTS = $(am_helldl_OBJECTS)
+helldl_LDADD = $(LDADD)
+helldl_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(helldl_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SCRIPTS = $(bin_SCRIPTS)
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libhell0_a_SOURCES) $(libhell1_la_SOURCES) \
+	$(libhell2_la_SOURCES) $(libhello_la_SOURCES) $(hell_SOURCES) \
+	$(hell0_SOURCES) $(hell_static_SOURCES) $(helldl_SOURCES)
+DIST_SOURCES = $(libhell0_a_SOURCES) $(libhell1_la_SOURCES) \
+	$(libhell2_la_SOURCES) $(libhello_la_SOURCES) $(hell_SOURCES) \
+	$(hell0_SOURCES) $(hell_static_SOURCES) \
+	$(am__helldl_SOURCES_DIST)
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC = @STATIC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS = -I ../../libltdl/m4
+AM_CPPFLAGS = -I$(top_srcdir)/../..
+
+# Build a libtool library, libhello.la for installation in libdir.
+lib_LTLIBRARIES = libhello.la
+libhello_la_SOURCES = hello.c foo.c
+libhello_la_LIBADD = $(LIBM)
+libhello_la_LDFLAGS = -no-undefined -version-info 3:12:1
+libhello_la_AM_CPPFLAGS = $(AM_CPPFLAGS) -DBUILDING_LIBHELLO
+include_HEADERS = foo.h
+@BINARY_HELLDL_FALSE@BUILD_helldl = 
+@BINARY_HELLDL_TRUE@BUILD_helldl = helldl
+
+# Build hell from main.c and libhello.la
+hell_SOURCES = main.c
+hell_LDADD = libhello.la
+
+# Create a statically linked version of hell.
+hell_static_SOURCES = main.c
+hell_static_LDADD = libhello.la
+hell_static_LDFLAGS = $(STATIC)
+
+# Create a version of hell that does a preloaded dlopen.
+@BINARY_HELLDL_TRUE@helldl_SOURCES = dlmain.c
+@BINARY_HELLDL_TRUE@helldl_LDFLAGS = -export-dynamic -dlpreopen libhello.la
+@BINARY_HELLDL_TRUE@helldl_DEPENDENCIES = libhello.la
+@BINARY_HELLDL_FALSE@bin_SCRIPTS = helldl
+
+#----------------------------------------------------------------------
+# The following declarations are only used in the testsuite:
+#----------------------------------------------------------------------
+hardcode_tests = hc-direct hc-libflag hc-libpath hc-minusL
+
+# 'hell0' in EXTRA_PROGRAMS gets translated to 'hell0.exe'; but we
+# must explicitly list the wrapper script 'hell0'.  (bin_PROGRAMS
+# are handled seamlessly by automake rules; the extra step is only
+# necessary for EXTRA_PROGRAMS)
+CLEANFILES = $(hardcode_tests) $(EXTRA_LIBRARIES) $(EXTRA_LTLIBRARIES) \
+	$(EXTRA_PROGRAMS) hell0
+
+# Unfortunately, in order to test libtool thoroughly, we need access
+# to its private directory.
+objdir = `$(LIBTOOL) --config | sed -n -e 's/^objdir=\(.*\)$$/\1/p'`
+SET_HARDCODE_FLAGS = \
+  eval `$(LIBTOOL) --config | sed -n -e '/^hardcode_.*=/p; /^wl=/p'`
+
+
+# This is one of the essential tests for deplibs_check_method=pass_all.
+# If this one passes with pass_all, it is likely that pass_all works
+EXTRA_LIBRARIES = libhell0.a
+libhell0_a_SOURCES = 
+libhell0_a_LIBADD = hello.$(OBJEXT) foo.$(OBJEXT)
+EXTRA_LTLIBRARIES = libhell1.la libhell2.la
+libhell1_la_SOURCES = hell1.c
+libhell1_la_LIBADD = -L. -lhell0
+libhell1_la_LDFLAGS = -no-undefined -rpath $(libdir)
+libhell1_la_DEPENDENCIES = libhell0.a
+libhell2_la_SOURCES = hell2.c
+libhell2_la_LIBADD = -L. -lhell0
+libhell2_la_LDFLAGS = -no-undefined -rpath $(libdir)
+libhell2_la_DEPENDENCIES = libhell0.a
+hell0_SOURCES = main.c
+hell0_LDADD = libhell1.la libhell2.la $(LIBM)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+libhell0.a: $(libhell0_a_OBJECTS) $(libhell0_a_DEPENDENCIES) 
+	-rm -f libhell0.a
+	$(libhell0_a_AR) libhell0.a $(libhell0_a_OBJECTS) $(libhell0_a_LIBADD)
+	$(RANLIB) libhell0.a
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libhell1.la: $(libhell1_la_OBJECTS) $(libhell1_la_DEPENDENCIES) 
+	$(libhell1_la_LINK)  $(libhell1_la_OBJECTS) $(libhell1_la_LIBADD) $(LIBS)
+libhell2.la: $(libhell2_la_OBJECTS) $(libhell2_la_DEPENDENCIES) 
+	$(libhell2_la_LINK)  $(libhell2_la_OBJECTS) $(libhell2_la_LIBADD) $(LIBS)
+libhello.la: $(libhello_la_OBJECTS) $(libhello_la_DEPENDENCIES) 
+	$(libhello_la_LINK) -rpath $(libdir) $(libhello_la_OBJECTS) $(libhello_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+hell$(EXEEXT): $(hell_OBJECTS) $(hell_DEPENDENCIES) 
+	@rm -f hell$(EXEEXT)
+	$(LINK) $(hell_OBJECTS) $(hell_LDADD) $(LIBS)
+hell0$(EXEEXT): $(hell0_OBJECTS) $(hell0_DEPENDENCIES) 
+	@rm -f hell0$(EXEEXT)
+	$(LINK) $(hell0_OBJECTS) $(hell0_LDADD) $(LIBS)
+hell_static$(EXEEXT): $(hell_static_OBJECTS) $(hell_static_DEPENDENCIES) 
+	@rm -f hell_static$(EXEEXT)
+	$(hell_static_LINK) $(hell_static_OBJECTS) $(hell_static_LDADD) $(LIBS)
+helldl$(EXEEXT): $(helldl_OBJECTS) $(helldl_DEPENDENCIES) 
+	@rm -f helldl$(EXEEXT)
+	$(helldl_LINK) $(helldl_OBJECTS) $(helldl_LDADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(includedir)" && rm -f $$files
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(HEADERS)
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-binSCRIPTS \
+	install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+	uninstall-includeHEADERS uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
+	dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-binSCRIPTS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-includeHEADERS install-info \
+	install-info-am install-libLTLIBRARIES install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-binSCRIPTS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES
+
+# create a script that says that -dlopen is not supported
+@BINARY_HELLDL_FALSE@helldl helldl$(EXEEXT):
+@BINARY_HELLDL_FALSE@	rm -f $@
+@BINARY_HELLDL_FALSE@	echo '#! /bin/sh' > $@
+@BINARY_HELLDL_FALSE@	echo '-dlopen is unsupported' >> $@
+@BINARY_HELLDL_FALSE@	chmod +x $@
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# The following rules are only for the libtool demo and tests.
+# Regenerate our acinclude.m4 only if it doesn't exist.
+$(srcdir)/acinclude.m4:
+	rm -f $(srcdir)/acinclude.m4
+	cd $(srcdir) && $(LN_S) ../libtool.m4 acinclude.m4
+
+# Test programs to see what gets hardcoded.
+.PHONY: hardcode
+hardcode: $(hardcode_tests)
+hc-direct: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@rm -f hc-direct
+	@echo "You may ignore any linking errors from the following command:"
+	@shlib=./$(objdir)/libhello.a; \
+	  eval "`grep '^library_names' libhello.la`"; \
+	  for lib in $$library_names; do \
+	    shlib="./$(objdir)/$$lib"; \
+	  done; \
+	  $(SET_HARDCODE_FLAGS); \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$shlib $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$shlib $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+hc-libflag: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@$(SET_HARDCODE_FLAGS); \
+	  libdir=`pwd`/$(objdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  if test -z "$$flag"; then \
+	    echo "echo unsupported > $@"; \
+	    echo unsupported > $@ || status="$$?"; \
+	  else \
+	    echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$flag -L$(libdir) -lhello $(LIBS) $(LIBM)"; \
+	    $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$flag -L$(libdir) -lhello $(LIBS) $(LIBM) || status="$$?"; \
+	  fi; \
+	  exit $$status
+
+hc-libpath: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@rm -f hc-libpath
+	@echo "You may ignore any linking errors from the following command:"
+	@$(SET_HARDCODE_FLAGS); \
+	  eval `$(LIBTOOL) --config | grep '^shlibpath_var='`; \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$$shlibpath_var=./$(objdir) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$$shlibpath_var=./$(objdir) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+hc-minusL: $(hell_OBJECTS) $(hell_DEPENDENCIES)
+	@rm -f hc-minusL
+	@$(SET_HARDCODE_FLAGS); \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -L./$(objdir) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -L./$(objdir) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+deplibs-check: hell0$(EXEEXT)
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/demo/README b/tests/demo/README
new file mode 100644
index 0000000..511fd83
--- /dev/null
+++ b/tests/demo/README
@@ -0,0 +1,9 @@
+This is GNU hell, an example package that uses GNU libtool with an
+Automake-generated environment to build a simple library and program.
+
+Admittedly, it would be better if this was a more realistic example,
+say, a program that actually did something useful, but we can't have
+everything.
+
+Send bug reports and comments about GNU hell to the libtool mailing
+list <bug-libtool@gnu.org>.
diff --git a/tests/demo/aclocal.m4 b/tests/demo/aclocal.m4
new file mode 100644
index 0000000..d479ce3
--- /dev/null
+++ b/tests/demo/aclocal.m4
@@ -0,0 +1,956 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../libltdl/m4/libtool.m4])
+m4_include([../../libltdl/m4/ltoptions.m4])
+m4_include([../../libltdl/m4/ltsugar.m4])
+m4_include([../../libltdl/m4/ltversion.m4])
+m4_include([../../libltdl/m4/lt~obsolete.m4])
diff --git a/tests/demo/configure b/tests/demo/configure
new file mode 100755
index 0000000..094838a
--- /dev/null
+++ b/tests/demo/configure
@@ -0,0 +1,13853 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for demo 1.0.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='demo'
+PACKAGE_TARNAME='demo'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='demo 1.0'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="hello.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+LIBM
+BINARY_HELLDL_FALSE
+BINARY_HELLDL_TRUE
+STATIC
+LIBTOOL_DEPS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures demo 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/demo]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of demo 1.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+demo configure 1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by demo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in ../../libltdl/config "$srcdir"/../../libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../libltdl/config \"$srcdir\"/../../libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='demo'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ---------------- ##
+## compiler checks. ##
+## ---------------- ##
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+enable_dlopen=yes
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+  ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+STATIC=
+test "X$enable_static" = Xyes && STATIC=-static
+
+
+case $lt_cv_sys_global_symbol_pipe in
+  ?*) binary_helldl=yes ;;
+esac
+ if test "X$binary_helldl" = Xyes; then
+  BINARY_HELLDL_TRUE=
+  BINARY_HELLDL_FALSE='#'
+else
+  BINARY_HELLDL_TRUE='#'
+  BINARY_HELLDL_FALSE=
+fi
+
+
+
+## --------------------------- ##
+## Libraries required by demo. ##
+## --------------------------- ##
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _mwvalidcheckl in -lmw" >&5
+$as_echo_n "checking for _mwvalidcheckl in -lmw... " >&6; }
+if ${ac_cv_lib_mw__mwvalidcheckl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmw  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char _mwvalidcheckl ();
+int
+main ()
+{
+return _mwvalidcheckl ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_mw__mwvalidcheckl=yes
+else
+  ac_cv_lib_mw__mwvalidcheckl=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mw__mwvalidcheckl" >&5
+$as_echo "$ac_cv_lib_mw__mwvalidcheckl" >&6; }
+if test "x$ac_cv_lib_mw__mwvalidcheckl" = xyes; then :
+  LIBM="-lmw"
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="$LIBM -lm"
+fi
+
+  ;;
+*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="-lm"
+fi
+
+  ;;
+esac
+
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${BINARY_HELLDL_TRUE}" && test -z "${BINARY_HELLDL_FALSE}"; then
+  as_fn_error $? "conditional \"BINARY_HELLDL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by demo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+demo config.status 1.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in AS \
+DLLTOOL \
+OBJDUMP \
+SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Assembler program.
+AS=$lt_AS
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$lt_OBJDUMP
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/tests/demo/configure.ac b/tests/demo/configure.ac
new file mode 100644
index 0000000..ccfc6fb
--- /dev/null
+++ b/tests/demo/configure.ac
@@ -0,0 +1,73 @@
+## Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#   Copyright (C) 2001, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AC_PREREQ(2.54)
+
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([demo], [1.0], [bug-libtool@gnu.org])
+AC_CONFIG_SRCDIR([hello.c])
+AC_CONFIG_AUX_DIR([../../libltdl/config])
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE
+
+
+## ---------------- ##
+## compiler checks. ##
+## ---------------- ##
+AC_PROG_CC
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LT_INIT([dlopen win32-dll])
+AC_SUBST([LIBTOOL_DEPS])
+
+STATIC=
+test "X$enable_static" = Xyes && STATIC=-static
+AC_SUBST([STATIC])
+
+case $lt_cv_sys_global_symbol_pipe in
+  ?*) binary_helldl=yes ;;
+esac
+AM_CONDITIONAL([BINARY_HELLDL], [test "X$binary_helldl" = Xyes])
+
+
+## --------------------------- ##
+## Libraries required by demo. ##
+## --------------------------- ##
+LT_LIB_M
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/tests/demo/dlmain.c b/tests/demo/dlmain.c
new file mode 100644
index 0000000..8c8be09
--- /dev/null
+++ b/tests/demo/dlmain.c
@@ -0,0 +1,97 @@
+/* dlmain.c -- hello test program that uses simulated dynamic linking
+
+   Copyright (C) 1996-1999, 2004, 2006, 2007, 2010 Free Software
+   Foundation, Inc.
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+#include <string.h>
+
+#define lt_preloaded_symbols lt__PROGRAM__LTX_preloaded_symbols
+
+typedef struct
+{
+  const char *name;
+  lt_ptr_t address;
+} lt_dlsymlist;
+
+extern LT_DLSYM_CONST lt_dlsymlist lt_preloaded_symbols[];
+
+int
+main ()
+{
+  const lt_dlsymlist *s;
+  int (*pfoo)() = 0;
+  int (*phello)() = 0;
+  int *pnothing = 0;
+
+  printf ("Welcome to *modular* GNU Hell!\n");
+
+  /* Look up the symbols we require for this demonstration. */
+  s = lt_preloaded_symbols;
+  while (s->name)
+    {
+      if (s->address) {
+        const char *name = s->name;
+        printf ("found symbol: %s\n", name);
+        if (!strcmp ("hello", name))
+ 	  phello = (int(*)())s->address;
+        else if (!strcmp ("foo", name))
+  	  pfoo = (int(*)())s->address;
+        else if (!strcmp ("nothing", name))
+#ifndef _WIN32
+	  /* In an ideal world we could do this... */
+  	  pnothing = (int*)s->address;
+#else /* !_WIN32 */
+	  /* In an ideal world a shared lib would be able to export data */
+	  pnothing = (int*)&nothing;
+#endif
+      } else
+        printf ("found file: %s\n", s->name);
+      s ++;
+    }
+
+  /* Try assigning to the nothing variable. */
+  if (pnothing)
+    *pnothing = 1;
+  else
+    fprintf (stderr, "did not find the `nothing' variable\n");
+
+  /* Just call the functions and check return values. */
+  if (pfoo)
+    {
+      if ((*pfoo) () != FOO_RET)
+	return 1;
+    }
+  else
+    fprintf (stderr, "did not find the `foo' function\n");
+
+  if (phello)
+    {
+      if ((*phello) () != HELLO_RET)
+	return 3;
+    }
+  else
+    fprintf (stderr, "did not find the `hello' function\n");
+
+  return 0;
+}
diff --git a/tests/demo/foo.c b/tests/demo/foo.c
new file mode 100644
index 0000000..4f32f3c
--- /dev/null
+++ b/tests/demo/foo.c
@@ -0,0 +1,38 @@
+/* foo.c -- trivial test function for libfoo
+
+   Copyright (C) 1996-1999, 2007 Free Software Foundation, Inc.
+   Written by Gordon Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+
+#include <stdio.h>
+#include <math.h>
+
+/* Give a global variable definition. */
+int nothing = FOO_RET;
+
+int
+foo ()
+{
+  printf ("cos (0.0) = %g\n", (double) cos ((double) 0.0));
+  return FOO_RET;
+}
diff --git a/tests/demo/foo.h b/tests/demo/foo.h
new file mode 100644
index 0000000..e8a2c87
--- /dev/null
+++ b/tests/demo/foo.h
@@ -0,0 +1,102 @@
+/* foo.h -- interface to the libfoo library
+
+   Copyright (C) 1996-1999, 2010 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#ifndef _FOO_H_
+#define _FOO_H_ 1
+
+/* At some point, cygwin will stop defining __CYGWIN32__, but b19 and
+ * earlier do not define __CYGWIN__.  This snippit allows us to check
+ * for __CYGWIN__ reliably for both current, old, and (probable) future
+ * releases.
+ */
+#ifdef __CYGWIN32__
+#  ifndef __CYGWIN__
+#    define __CYGWIN__
+#  endif
+#endif
+
+#if (defined _WIN32 || defined _WIN32_WCE) && !defined __GNUC__
+# ifdef BUILDING_LIBHELLO
+#  ifdef DLL_EXPORT
+#   define LIBHELLO_SCOPE extern __declspec (dllexport)
+#  endif
+# else
+#  define LIBHELLO_SCOPE extern __declspec (dllimport)
+# endif
+#endif
+#ifndef LIBHELLO_SCOPE
+# define LIBHELLO_SCOPE extern
+#endif
+
+/* __BEGIN_DECLS should be used at the beginning of your declarations,
+   so that C++ compilers don't mangle their names.  Use __END_DECLS at
+   the end of C declarations. */
+#undef __BEGIN_DECLS
+#undef __END_DECLS
+#ifdef __cplusplus
+# define __BEGIN_DECLS extern "C" {
+# define __END_DECLS }
+#else
+# define __BEGIN_DECLS /* empty */
+# define __END_DECLS /* empty */
+#endif
+
+/* LTDL_PARAMS is a macro used to wrap function prototypes, so that compilers
+   that don't understand ANSI C prototypes still work, and ANSI C
+   compilers can issue warnings about type mismatches. */
+#undef LTDL_PARAMS
+#if defined (__STDC__) || defined (_AIX) || (defined (__mips) && defined (_SYSTYPE_SVR4)) || defined(__CYGWIN__) || defined(__cplusplus)
+# define LT_PARAMS(protos) protos
+# define lt_ptr_t     void*
+#else
+# define LT_PARAMS(protos) ()
+# define lt_ptr_t     char*
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+/* Silly constants that the functions return. */
+#define HELLO_RET 0xe110
+#define FOO_RET 0xf00
+
+
+/* Declarations.  Note the wonderful use of the above macros. */
+__BEGIN_DECLS
+int foo LT_PARAMS((void));
+int hello LT_PARAMS((void));
+LIBHELLO_SCOPE int nothing;
+__END_DECLS
+
+#endif /* !_FOO_H_ */
diff --git a/tests/demo/hell1.c b/tests/demo/hell1.c
new file mode 100644
index 0000000..3e65617
--- /dev/null
+++ b/tests/demo/hell1.c
@@ -0,0 +1,25 @@
+/* hell1.c -- hello test program that uses simulated dynamic linking
+
+   Copyright (C) 1996 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+int hell1() { return 1; }
diff --git a/tests/demo/hell2.c b/tests/demo/hell2.c
new file mode 100644
index 0000000..91a7548
--- /dev/null
+++ b/tests/demo/hell2.c
@@ -0,0 +1,25 @@
+/* hell2.c -- hello test program that uses simulated dynamic linking
+
+   Copyright (C) 1996 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+int hell2() { return 2; }
diff --git a/tests/demo/hello.c b/tests/demo/hello.c
new file mode 100644
index 0000000..fc08c1a
--- /dev/null
+++ b/tests/demo/hello.c
@@ -0,0 +1,34 @@
+/* hello.c -- trivial test function for libfoo
+
+   Copyright (C) 1996-1999 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+
+#include <stdio.h>
+
+int
+hello ()
+{
+  printf ("** This is not GNU Hello.  There is no built-in mail reader. **\n");
+  return HELLO_RET;
+}
diff --git a/tests/demo/main.c b/tests/demo/main.c
new file mode 100644
index 0000000..eaa0c60
--- /dev/null
+++ b/tests/demo/main.c
@@ -0,0 +1,44 @@
+/* main.c -- trivial hello test program
+
+   Copyright (C) 1996-1999, 2006 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+
+int
+main ()
+{
+  printf ("Welcome to GNU Hell!\n");
+
+  /* Try assigning to the nothing variable */
+  nothing = 1;
+
+  /* Just call the functions and check return values. */
+  if (foo () != FOO_RET)
+    return 1;
+
+  if (hello () != HELLO_RET)
+    return 2;
+
+  return 0;
+}
diff --git a/tests/depdemo-conf.test b/tests/depdemo-conf.test
new file mode 100755
index 0000000..3a29734
--- /dev/null
+++ b/tests/depdemo-conf.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# depdemo-conf.test - try configuring the depdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/depdemo"
+func_make_distclean
+func_configure
+func_check_static_shared "yes" "yes"
+
+exit 0
diff --git a/tests/depdemo-exec.test b/tests/depdemo-exec.test
new file mode 100755
index 0000000..6a6d270
--- /dev/null
+++ b/tests/depdemo-exec.test
@@ -0,0 +1,35 @@
+#! /bin/sh
+# depdemo-exec.test - check that programs in the depdemo subdirectory are viable
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "depdemo-make" "tests/depdemo/depdemo$EXEEXT"
+
+func_rmprefixdir
+func_exec_init "uninstalled"
+func_exec "tests/depdemo/depdemo_static$EXEEXT"
+func_exec "tests/depdemo/depdemo$EXEEXT"
+
+exit $exec_status
diff --git a/tests/depdemo-inst.test b/tests/depdemo-inst.test
new file mode 100755
index 0000000..a90b01d
--- /dev/null
+++ b/tests/depdemo-inst.test
@@ -0,0 +1,37 @@
+#! /bin/sh
+# depdemo-inst.test - try installing from the depdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "depdemo-make" "tests/depdemo/depdemo$EXEEXT"
+
+func_mkprefixdir
+func_cd "tests/depdemo"
+func_make "install"
+func_exec_init "installed"
+func_exec "$prefix/bin/depdemo_static$EXEEXT"
+func_exec "$prefix/bin/depdemo$EXEEXT"
+
+exit $status
diff --git a/tests/depdemo-make.test b/tests/depdemo-make.test
new file mode 100755
index 0000000..d011401
--- /dev/null
+++ b/tests/depdemo-make.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# depdemo-make.test - try building in the depdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "depdemo-conf" "tests/depdemo/Makefile"
+
+func_rmprefixdir
+func_cd "tests/depdemo"
+func_make
+
+exit 0
diff --git a/tests/depdemo-nofast-exec.test b/tests/depdemo-nofast-exec.test
new file mode 100755
index 0000000..5b14104
--- /dev/null
+++ b/tests/depdemo-nofast-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-exec.test
diff --git a/tests/depdemo-nofast-inst.test b/tests/depdemo-nofast-inst.test
new file mode 100755
index 0000000..b22013e
--- /dev/null
+++ b/tests/depdemo-nofast-inst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-inst.test
diff --git a/tests/depdemo-nofast-make.test b/tests/depdemo-nofast-make.test
new file mode 100755
index 0000000..e8cb467
--- /dev/null
+++ b/tests/depdemo-nofast-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-make.test
diff --git a/tests/depdemo-nofast-unst.test b/tests/depdemo-nofast-unst.test
new file mode 100755
index 0000000..f3ccf3f
--- /dev/null
+++ b/tests/depdemo-nofast-unst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-unst.test
diff --git a/tests/depdemo-nofast.test b/tests/depdemo-nofast.test
new file mode 100755
index 0000000..2f4246f
--- /dev/null
+++ b/tests/depdemo-nofast.test
@@ -0,0 +1,38 @@
+#! /bin/sh
+# depdemo-nofast.test - try configuring the ./depdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/depdemo"
+func_make_distclean
+func_configure "--enable-fast-install=no"
+
+if func_grep '^hardcode_action=relink' libtool; then
+  rm -f Makefile
+  exit 77
+fi
+
+exit 0
diff --git a/tests/depdemo-relink.test b/tests/depdemo-relink.test
new file mode 100755
index 0000000..cf5c695
--- /dev/null
+++ b/tests/depdemo-relink.test
@@ -0,0 +1,127 @@
+#! /bin/sh
+# depdemo-relink.test - check to see whether shlibpath overrides runpath
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_restore_files ()
+{
+    func_mkdir_p "$objdir"
+    test "`echo _fnord/temp/libs/*`" = "_fnord/temp/libs/*" \
+      || mv -f _fnord/temp/libs/* "l3/$objdir"
+    mv -f "_fnord/temp/libl3.la" "l3"
+    test -f "_fnord/temp/lt-depdemo$EXEEXT" \
+      && mv -f "_fnord/temp/lt-depdemo$EXEEXT" "$objdir"
+    test -f "_fnord/temp/depdemo$EXEEXT" \
+      && mv -f "_fnord/temp/depdemo$EXEEXT" "$objdir"
+    rm -rf "_fnord"
+}
+
+func_save_files ()
+{
+    func_mkdir_p "_fnord/temp/libs"
+    test -f "$objdir/lt-depdemo$EXEEXT" \
+      && cp -f "$objdir/lt-depdemo$EXEEXT" "_fnord/temp"
+    test -f "$objdir/depdemo$EXEEXT" \
+      && cp -f "$objdir/depdemo$EXEEXT" "_fnord/temp"
+    cp -f l3/libl3.la "_fnord/temp"
+    cp -f l3/"$objdir"/* "_fnord/temp/libs"
+    trap "func_restore_files" 0 1 2 13 15
+}
+
+func_require "depdemo-inst" "$prefix/lib/libl3.la"  "tests/depdemo/l3/libl3.la"
+
+func_mkprefixdir
+func_cd "tests/depdemo"
+
+# Check to make sure we have a dynamic library.
+func_get_config "library_names" "cat l3/libl3.la"
+test -z "$library_names" \
+  && func_skip "Exiting: depdemo/l3/libl3.la is not a shared library"
+
+func_save_files
+
+func_get_config 'shlibpath_overrides_runpath
+hardcode_action
+hardcode_direct
+hardcode_into_libs' "./libtool --config" ": fatal"
+
+./depdemo$EXEEXT # so that it links on-demand if needed
+
+func_msg "removing libl3.la from depdemo/l3"
+rm -rf l3/libl3.la l3/$objdir
+
+func_msg "running depdemo/depdemo"
+if ./depdemo$EXEEXT ||
+   # On AIX 4.1, when the installed copy of libl3 is loaded, it brings
+   # with it the installed copies of libl1 and libl2, with disjoint
+   # counters var_l1 and var_l2.  This is arguably acceptable behavior,
+   # but it's definitely not enough of a reason for the test to fail.
+   ./depdemo$EXEEXT -alt; then
+  :
+elif test "x,$hardcode_action,$hardcode_direct" = x,relink,yes; then
+  func_msg "Ok, uninstalled programs fail after uninstalled libraries are removed"
+  func_msg "This works in other configurations, but not in this particular one"
+elif test "$build" != "$host"; then
+  func_msg "depdemo/depdemo does not run.  Since you seem to be"
+  func_msg "cross-compiling, this might be ok."
+else
+  func_fail "Exiting: depdemo/depdemo does not run, maybe libl3 was not installed"
+fi
+
+func_msg "linking a broken depdemo/l3/libl3.la"
+(cd l3 && $MAKE libl3.la libl3_la_OBJECTS=../l2/l2.lo) \
+  || func_fail "Exiting: cannot link broken libl3.la"
+rm -f l3/libl3.la
+
+func_msg "running depdemo/depdemo with broken libl3.la"
+if (./depdemo$EXEEXT) 2>&1; then
+  func_msg "Exiting: depdemo/depdemo runs even though libl3.la is incomplete"
+  func_fail "shlibpath_overrides_runpath should be set to no"
+elif test "$build" != "$host"; then
+  func_msg "Failed, as expected.  But since you seem to be"
+  func_msg "cross-compiling, this is not reliable."
+  status=$EXIT_SKIP
+else
+  func_msg "Failed, as expected"
+fi
+
+if test "x$hardcode_action" = xrelink; then
+  func_msg "Exiting: install-time relinking is required"
+  exit $EXIT_SUCCESS
+fi
+
+if test "$shlibpath_overrides_runpath" != yes; then
+  rm -f $objdir/lt-depdemo || exit $EXIT_FAILURE
+  cp $objdir/depdemo $objdir/lt-depdemo || exit $EXIT_FAILURE
+  func_msg "running depdemo/depdemo with installed libl3.la"
+  if ./depdemo; then
+    func_msg "Worked, as expected"
+  else
+    func_msg "shlibpath_overrides_runpath should be set to yes"
+    status=$EXIT_FAILURE
+  fi
+fi
+
+exit $status
diff --git a/tests/depdemo-shared-exec.test b/tests/depdemo-shared-exec.test
new file mode 100755
index 0000000..5b14104
--- /dev/null
+++ b/tests/depdemo-shared-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-exec.test
diff --git a/tests/depdemo-shared-inst.test b/tests/depdemo-shared-inst.test
new file mode 100755
index 0000000..b22013e
--- /dev/null
+++ b/tests/depdemo-shared-inst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-inst.test
diff --git a/tests/depdemo-shared-make.test b/tests/depdemo-shared-make.test
new file mode 100755
index 0000000..e8cb467
--- /dev/null
+++ b/tests/depdemo-shared-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-make.test
diff --git a/tests/depdemo-shared-unst.test b/tests/depdemo-shared-unst.test
new file mode 100755
index 0000000..f3ccf3f
--- /dev/null
+++ b/tests/depdemo-shared-unst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-unst.test
diff --git a/tests/depdemo-shared.test b/tests/depdemo-shared.test
new file mode 100755
index 0000000..8b334d6
--- /dev/null
+++ b/tests/depdemo-shared.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# depdemo-shared.test - try configuring the depdemo subdirectory for shared libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/depdemo"
+func_make_distclean
+func_configure "--disable-static"
+func_check_static_shared "no" "yes"
+
+exit 0
diff --git a/tests/depdemo-static-exec.test b/tests/depdemo-static-exec.test
new file mode 100755
index 0000000..5b14104
--- /dev/null
+++ b/tests/depdemo-static-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-exec.test
diff --git a/tests/depdemo-static-inst.test b/tests/depdemo-static-inst.test
new file mode 100755
index 0000000..b22013e
--- /dev/null
+++ b/tests/depdemo-static-inst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-inst.test
diff --git a/tests/depdemo-static-make.test b/tests/depdemo-static-make.test
new file mode 100755
index 0000000..e8cb467
--- /dev/null
+++ b/tests/depdemo-static-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-make.test
diff --git a/tests/depdemo-static-unst.test b/tests/depdemo-static-unst.test
new file mode 100755
index 0000000..f3ccf3f
--- /dev/null
+++ b/tests/depdemo-static-unst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/depdemo-unst.test
diff --git a/tests/depdemo-static.test b/tests/depdemo-static.test
new file mode 100755
index 0000000..39de6b8
--- /dev/null
+++ b/tests/depdemo-static.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# depdemo-static.test - try configuring the depdemo subdirectory for static libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/depdemo"
+func_make_distclean
+func_configure "--disable-shared"
+func_check_static_shared "yes" "no"
+
+exit 0
diff --git a/tests/depdemo-unst.test b/tests/depdemo-unst.test
new file mode 100755
index 0000000..6096e6d
--- /dev/null
+++ b/tests/depdemo-unst.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# depdemo-unst.test - try uninstalling in the depdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "depdemo-inst" "$prefix/bin/depdemo$EXEEXT" "tests/depdemo/Makefile"
+
+func_mkprefixdir
+func_cd "tests/depdemo"
+func_make_uninstall
+
+exit 0
diff --git a/tests/depdemo/Makefile.am b/tests/depdemo/Makefile.am
new file mode 100644
index 0000000..ef6b060
--- /dev/null
+++ b/tests/depdemo/Makefile.am
@@ -0,0 +1,57 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS  = -I ../../libltdl/m4
+AM_CPPFLAGS	 = -I$(top_srcdir)/../..
+
+SUBDIRS = l1 l2 l3 l4
+
+EXTRA_DIST = sysdep.h
+
+bin_PROGRAMS = depdemo depdemo_static
+
+depdemo_SOURCES = main.c
+depdemo_LDADD = $(top_builddir)/l1/libl1.la $(top_builddir)/l2/libl2.la \
+		$(top_builddir)/l4/libl4.la
+depdemo_DEPENDENCIES = $(top_builddir)/l1/libl1.la \
+		$(top_builddir)/l2/libl2.la $(top_builddir)/l4/libl4.la
+
+depdemo_static_SOURCES = $(depdemo_SOURCES)
+depdemo_static_LDADD = $(depdemo_LDADD)
+depdemo_static_DEPENDENCIES = $(depdemo_DEPENDENCIES)
+depdemo_static_LDFLAGS = $(STATIC)
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
diff --git a/tests/depdemo/Makefile.in b/tests/depdemo/Makefile.in
new file mode 100644
index 0000000..c2643fa
--- /dev/null
+++ b/tests/depdemo/Makefile.in
@@ -0,0 +1,838 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = depdemo$(EXEEXT) depdemo_static$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) \
+	$(srcdir)/../../libltdl/config/config.guess \
+	$(srcdir)/../../libltdl/config/config.sub \
+	$(srcdir)/../../libltdl/config/install-sh \
+	$(srcdir)/../../libltdl/config/ltmain.sh \
+	$(srcdir)/../../libltdl/config/missing $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	../../libltdl/config/compile ../../libltdl/config/config.guess \
+	../../libltdl/config/config.sub ../../libltdl/config/depcomp \
+	../../libltdl/config/install-sh ../../libltdl/config/ltmain.sh \
+	../../libltdl/config/mdate-sh ../../libltdl/config/missing \
+	../../libltdl/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_depdemo_OBJECTS = main.$(OBJEXT)
+depdemo_OBJECTS = $(am_depdemo_OBJECTS)
+am__objects_1 = main.$(OBJEXT)
+am_depdemo_static_OBJECTS = $(am__objects_1)
+depdemo_static_OBJECTS = $(am_depdemo_static_OBJECTS)
+depdemo_static_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(depdemo_static_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(depdemo_SOURCES) $(depdemo_static_SOURCES)
+DIST_SOURCES = $(depdemo_SOURCES) $(depdemo_static_SOURCES)
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir dist dist-all distcheck
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC = @STATIC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS = -I ../../libltdl/m4
+AM_CPPFLAGS = -I$(top_srcdir)/../..
+SUBDIRS = l1 l2 l3 l4
+EXTRA_DIST = sysdep.h
+depdemo_SOURCES = main.c
+depdemo_LDADD = $(top_builddir)/l1/libl1.la $(top_builddir)/l2/libl2.la \
+		$(top_builddir)/l4/libl4.la
+
+depdemo_DEPENDENCIES = $(top_builddir)/l1/libl1.la \
+		$(top_builddir)/l2/libl2.la $(top_builddir)/l4/libl4.la
+
+depdemo_static_SOURCES = $(depdemo_SOURCES)
+depdemo_static_LDADD = $(depdemo_LDADD)
+depdemo_static_DEPENDENCIES = $(depdemo_DEPENDENCIES)
+depdemo_static_LDFLAGS = $(STATIC)
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+depdemo$(EXEEXT): $(depdemo_OBJECTS) $(depdemo_DEPENDENCIES) 
+	@rm -f depdemo$(EXEEXT)
+	$(LINK) $(depdemo_OBJECTS) $(depdemo_LDADD) $(LIBS)
+depdemo_static$(EXEEXT): $(depdemo_static_OBJECTS) $(depdemo_static_DEPENDENCIES) 
+	@rm -f depdemo_static$(EXEEXT)
+	$(depdemo_static_LINK) $(depdemo_static_OBJECTS) $(depdemo_static_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(PROGRAMS)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-binPROGRAMS \
+	clean-generic clean-libtool ctags ctags-recursive dist \
+	dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-local \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-binPROGRAMS
+
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/depdemo/README b/tests/depdemo/README
new file mode 100644
index 0000000..30d7166
--- /dev/null
+++ b/tests/depdemo/README
@@ -0,0 +1,11 @@
+This is depdemo, an example package that uses GNU libtool with an
+Automake-generated environment to build many interdependent libraries
+and a test program.
+
+There are four libraries: l1, l2, l3 and l4.
+l1 depends on nothing.
+l2 depends on l1.
+l3 depends on l1 and l2.
+l4 depends on l3 and libm.
+
+The test program uses l1, l2 and l4.
diff --git a/tests/depdemo/aclocal.m4 b/tests/depdemo/aclocal.m4
new file mode 100644
index 0000000..d479ce3
--- /dev/null
+++ b/tests/depdemo/aclocal.m4
@@ -0,0 +1,956 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../libltdl/m4/libtool.m4])
+m4_include([../../libltdl/m4/ltoptions.m4])
+m4_include([../../libltdl/m4/ltsugar.m4])
+m4_include([../../libltdl/m4/ltversion.m4])
+m4_include([../../libltdl/m4/lt~obsolete.m4])
diff --git a/tests/depdemo/configure b/tests/depdemo/configure
new file mode 100755
index 0000000..0cecb43
--- /dev/null
+++ b/tests/depdemo/configure
@@ -0,0 +1,13840 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for depdemo 1.0.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='depdemo'
+PACKAGE_TARNAME='depdemo'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='depdemo 1.0'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="main.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+LIBM
+STATIC
+LIBTOOL_DEPS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures depdemo 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/depdemo]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of depdemo 1.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+depdemo configure 1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by depdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in ../../libltdl/config "$srcdir"/../../libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../libltdl/config \"$srcdir\"/../../libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='depdemo'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ---------------- ##
+## compiler checks. ##
+## ---------------- ##
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+  ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+        enable_dlopen=no
+
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+## ------------------------------- ##
+## depdemo specific configuration. ##
+## ------------------------------- ##
+STATIC="\`${CONFIG_SHELL} ./libtool --features | ${SED} -n -e '/enable static/s/^.*\$\$/-static/p'\`"
+
+
+## ------------------------------ ##
+## Libraries required by depdemo. ##
+## ------------------------------ ##
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _mwvalidcheckl in -lmw" >&5
+$as_echo_n "checking for _mwvalidcheckl in -lmw... " >&6; }
+if ${ac_cv_lib_mw__mwvalidcheckl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmw  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char _mwvalidcheckl ();
+int
+main ()
+{
+return _mwvalidcheckl ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_mw__mwvalidcheckl=yes
+else
+  ac_cv_lib_mw__mwvalidcheckl=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mw__mwvalidcheckl" >&5
+$as_echo "$ac_cv_lib_mw__mwvalidcheckl" >&6; }
+if test "x$ac_cv_lib_mw__mwvalidcheckl" = xyes; then :
+  LIBM="-lmw"
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="$LIBM -lm"
+fi
+
+  ;;
+*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="-lm"
+fi
+
+  ;;
+esac
+
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile l1/Makefile l2/Makefile l3/Makefile l4/Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by depdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+depdemo config.status 1.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in AS \
+DLLTOOL \
+OBJDUMP \
+SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "l1/Makefile") CONFIG_FILES="$CONFIG_FILES l1/Makefile" ;;
+    "l2/Makefile") CONFIG_FILES="$CONFIG_FILES l2/Makefile" ;;
+    "l3/Makefile") CONFIG_FILES="$CONFIG_FILES l3/Makefile" ;;
+    "l4/Makefile") CONFIG_FILES="$CONFIG_FILES l4/Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Assembler program.
+AS=$lt_AS
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$lt_OBJDUMP
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/tests/depdemo/configure.ac b/tests/depdemo/configure.ac
new file mode 100644
index 0000000..31231f3
--- /dev/null
+++ b/tests/depdemo/configure.ac
@@ -0,0 +1,68 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#   Copyright (C) 2001, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AC_PREREQ(2.54)
+
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([depdemo], [1.0], [bug-libtool@gnu.org])
+AC_CONFIG_SRCDIR([main.c])
+AC_CONFIG_AUX_DIR([../../libltdl/config])
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE
+
+
+## ---------------- ##
+## compiler checks. ##
+## ---------------- ##
+AC_PROG_CC
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LT_INIT([win32-dll])
+AC_SUBST([LIBTOOL_DEPS])
+
+## ------------------------------- ##
+## depdemo specific configuration. ##
+## ------------------------------- ##
+STATIC="\`${CONFIG_SHELL} ./libtool --features | ${SED} -n -e '/enable static/s/^.*\$\$/-static/p'\`"
+AC_SUBST([STATIC])
+
+## ------------------------------ ##
+## Libraries required by depdemo. ##
+## ------------------------------ ##
+LT_LIB_M
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile l1/Makefile l2/Makefile l3/Makefile l4/Makefile])
+AC_OUTPUT
diff --git a/tests/depdemo/l1/Makefile.am b/tests/depdemo/l1/Makefile.am
new file mode 100644
index 0000000..b2e7cb8
--- /dev/null
+++ b/tests/depdemo/l1/Makefile.am
@@ -0,0 +1,33 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2010 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+top_distdir = ../..
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+
+AM_CPPFLAGS = -I$(top_srcdir) -DBUILDING_LIBL1
+
+lib_LTLIBRARIES = libl1.la
+libl1_la_SOURCES = l1.c l1.h
+libl1_la_LDFLAGS = -no-undefined
diff --git a/tests/depdemo/l1/Makefile.in b/tests/depdemo/l1/Makefile.in
new file mode 100644
index 0000000..4233d89
--- /dev/null
+++ b/tests/depdemo/l1/Makefile.in
@@ -0,0 +1,513 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = l1
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libl1_la_LIBADD =
+am_libl1_la_OBJECTS = l1.lo
+libl1_la_OBJECTS = $(am_libl1_la_OBJECTS)
+libl1_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libl1_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libl1_la_SOURCES)
+DIST_SOURCES = $(libl1_la_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC = @STATIC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+top_distdir = ../..
+AUTOMAKE_OPTIONS = no-dependencies foreign
+AM_CPPFLAGS = -I$(top_srcdir) -DBUILDING_LIBL1
+lib_LTLIBRARIES = libl1.la
+libl1_la_SOURCES = l1.c l1.h
+libl1_la_LDFLAGS = -no-undefined
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign l1/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign l1/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libl1.la: $(libl1_la_OBJECTS) $(libl1_la_DEPENDENCIES) 
+	$(libl1_la_LINK) -rpath $(libdir) $(libl1_la_OBJECTS) $(libl1_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libLTLIBRARIES clean-libtool ctags distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-libLTLIBRARIES
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/depdemo/l1/l1.c b/tests/depdemo/l1/l1.c
new file mode 100644
index 0000000..d7c6c1e
--- /dev/null
+++ b/tests/depdemo/l1/l1.c
@@ -0,0 +1,41 @@
+/* l1.c -- trivial test library
+
+   Copyright (C) 1998-1999 Thomas Tanner
+   Copyright (C) 2006 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "l1/l1.h"
+#include <stdio.h>
+
+int	var_l1 = 0;
+
+int
+func_l1 (int indent)
+{
+  int i;
+
+  for (i = 0; i < indent; i++)
+    putchar(' ');
+  printf("l1 (%i)\n", var_l1);
+  var_l1++;
+  return 0; 
+}
diff --git a/tests/depdemo/l1/l1.h b/tests/depdemo/l1/l1.h
new file mode 100644
index 0000000..d357d80
--- /dev/null
+++ b/tests/depdemo/l1/l1.h
@@ -0,0 +1,50 @@
+/* l1.h -- interface to a trivial library
+
+   Copyright (C) 1998-1999 Thomas Tanner
+   Copyright (C) 2006, 2010 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#ifndef _L1_H_
+#define _L1_H_ 1
+
+#include "sysdep.h"
+
+#if (defined _WIN32 || defined _WIN32_WCE) && !defined __GNUC__
+# ifdef BUILDING_LIBL1
+#  ifdef DLL_EXPORT
+#   define LIBL1_SCOPE extern __declspec (dllexport)
+#  endif
+# else
+#  define LIBL1_SCOPE extern __declspec (dllimport)
+# endif
+#endif
+#ifndef LIBL1_SCOPE
+# define LIBL1_SCOPE extern
+#endif
+
+__BEGIN_DECLS
+LIBL1_SCOPE int var_l1;
+int	func_l1 __P((int));
+__END_DECLS
+
+#endif /* !_L1_H_ */
diff --git a/tests/depdemo/l2/Makefile.am b/tests/depdemo/l2/Makefile.am
new file mode 100644
index 0000000..2cb86c5
--- /dev/null
+++ b/tests/depdemo/l2/Makefile.am
@@ -0,0 +1,34 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2010 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+top_distdir = ../..
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+
+AM_CPPFLAGS = -I$(top_srcdir) -DBUILDING_LIBL2
+
+lib_LTLIBRARIES = libl2.la
+libl2_la_SOURCES = l2.c l2.h
+libl2_la_LDFLAGS = -no-undefined
+libl2_la_LIBADD = $(top_builddir)/l1/libl1.la
diff --git a/tests/depdemo/l2/Makefile.in b/tests/depdemo/l2/Makefile.in
new file mode 100644
index 0000000..f5228ee
--- /dev/null
+++ b/tests/depdemo/l2/Makefile.in
@@ -0,0 +1,514 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = l2
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libl2_la_DEPENDENCIES = $(top_builddir)/l1/libl1.la
+am_libl2_la_OBJECTS = l2.lo
+libl2_la_OBJECTS = $(am_libl2_la_OBJECTS)
+libl2_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libl2_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libl2_la_SOURCES)
+DIST_SOURCES = $(libl2_la_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC = @STATIC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+top_distdir = ../..
+AUTOMAKE_OPTIONS = no-dependencies foreign
+AM_CPPFLAGS = -I$(top_srcdir) -DBUILDING_LIBL2
+lib_LTLIBRARIES = libl2.la
+libl2_la_SOURCES = l2.c l2.h
+libl2_la_LDFLAGS = -no-undefined
+libl2_la_LIBADD = $(top_builddir)/l1/libl1.la
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign l2/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign l2/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libl2.la: $(libl2_la_OBJECTS) $(libl2_la_DEPENDENCIES) 
+	$(libl2_la_LINK) -rpath $(libdir) $(libl2_la_OBJECTS) $(libl2_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libLTLIBRARIES clean-libtool ctags distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-libLTLIBRARIES
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/depdemo/l2/l2.c b/tests/depdemo/l2/l2.c
new file mode 100644
index 0000000..b545332
--- /dev/null
+++ b/tests/depdemo/l2/l2.c
@@ -0,0 +1,44 @@
+/* l2.c -- trivial test library
+
+   Copyright (C) 1998-1999 Thomas Tanner
+   Copyright (C) 2006 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "l2/l2.h"
+
+#include "l1/l1.h"
+#include <stdio.h>
+
+int	var_l2 = 0;
+
+int
+func_l2 (int indent)
+{
+  int i;
+
+  for (i = 0; i < indent; i++)
+    putchar(' ');
+  printf("l2 (%i)\n", var_l2);
+  func_l1(indent+1);
+  var_l2 += var_l1;
+  return 0; 
+}
diff --git a/tests/depdemo/l2/l2.h b/tests/depdemo/l2/l2.h
new file mode 100644
index 0000000..0f6b3b9
--- /dev/null
+++ b/tests/depdemo/l2/l2.h
@@ -0,0 +1,50 @@
+/* l2.h -- interface to a trivial library
+
+   Copyright (C) 1998-1999 Thomas Tanner
+   Copyright (C) 2006, 2010 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#ifndef _L2_H_
+#define _L2_H_ 1
+
+#include "sysdep.h"
+
+#if (defined _WIN32 || defined _WIN32_WCE) && !defined __GNUC__
+# ifdef BUILDING_LIBL2
+#  ifdef DLL_EXPORT
+#   define LIBL2_SCOPE extern __declspec (dllexport)
+#  endif
+# else
+#  define LIBL2_SCOPE extern __declspec (dllimport)
+# endif
+#endif
+#ifndef LIBL2_SCOPE
+# define LIBL2_SCOPE extern
+#endif
+
+__BEGIN_DECLS
+LIBL2_SCOPE int var_l2;
+int	func_l2 __P((int));
+__END_DECLS
+
+#endif /* !_L2_H_ */
diff --git a/tests/depdemo/l3/Makefile.am b/tests/depdemo/l3/Makefile.am
new file mode 100644
index 0000000..341932f
--- /dev/null
+++ b/tests/depdemo/l3/Makefile.am
@@ -0,0 +1,35 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2010 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+top_distdir = ../..
+extradir    = $(libdir)/extra
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+
+AM_CPPFLAGS = -I$(top_srcdir) -DBUILDING_LIBL3
+
+lib_LTLIBRARIES = libl3.la
+libl3_la_SOURCES = l3.c l3.h
+libl3_la_LDFLAGS = -no-undefined
+libl3_la_LIBADD = $(top_builddir)/l1/libl1.la $(top_builddir)/l2/libl2.la
diff --git a/tests/depdemo/l3/Makefile.in b/tests/depdemo/l3/Makefile.in
new file mode 100644
index 0000000..4ed6ffb
--- /dev/null
+++ b/tests/depdemo/l3/Makefile.in
@@ -0,0 +1,516 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = l3
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libl3_la_DEPENDENCIES = $(top_builddir)/l1/libl1.la \
+	$(top_builddir)/l2/libl2.la
+am_libl3_la_OBJECTS = l3.lo
+libl3_la_OBJECTS = $(am_libl3_la_OBJECTS)
+libl3_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libl3_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libl3_la_SOURCES)
+DIST_SOURCES = $(libl3_la_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC = @STATIC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+top_distdir = ../..
+extradir = $(libdir)/extra
+AUTOMAKE_OPTIONS = no-dependencies foreign
+AM_CPPFLAGS = -I$(top_srcdir) -DBUILDING_LIBL3
+lib_LTLIBRARIES = libl3.la
+libl3_la_SOURCES = l3.c l3.h
+libl3_la_LDFLAGS = -no-undefined
+libl3_la_LIBADD = $(top_builddir)/l1/libl1.la $(top_builddir)/l2/libl2.la
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign l3/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign l3/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libl3.la: $(libl3_la_OBJECTS) $(libl3_la_DEPENDENCIES) 
+	$(libl3_la_LINK) -rpath $(libdir) $(libl3_la_OBJECTS) $(libl3_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libLTLIBRARIES clean-libtool ctags distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-libLTLIBRARIES
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/depdemo/l3/l3.c b/tests/depdemo/l3/l3.c
new file mode 100644
index 0000000..6056907
--- /dev/null
+++ b/tests/depdemo/l3/l3.c
@@ -0,0 +1,46 @@
+/* l3.c -- trivial test library
+
+   Copyright (C) 1998-1999 Thomas Tanner
+   Copyright (C) 2006 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "l3/l3.h"
+
+#include "l1/l1.h"
+#include "l2/l2.h"
+#include <stdio.h>
+
+int	var_l3 = 0;
+
+int
+func_l3 (int indent)
+{
+  int i;
+
+  for (i = 0; i < indent; i++)
+    putchar(' ');
+  printf("l3 (%i)\n", var_l3);
+  func_l1(indent+1);
+  func_l2(indent+1);
+  var_l3 += var_l1 + var_l2;
+  return 0; 
+}
diff --git a/tests/depdemo/l3/l3.h b/tests/depdemo/l3/l3.h
new file mode 100644
index 0000000..60fcbd5
--- /dev/null
+++ b/tests/depdemo/l3/l3.h
@@ -0,0 +1,50 @@
+/* l3.h -- interface to a trivial library
+
+   Copyright (C) 1998-1999 Thomas Tanner
+   Copyright (C) 2006, 2010 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#ifndef _L3_H_
+#define _L3_H_ 1
+
+#include "sysdep.h"
+
+#if (defined _WIN32 || defined _WIN32_WCE) && !defined __GNUC__
+# ifdef BUILDING_LIBL3
+#  ifdef DLL_EXPORT
+#   define LIBL3_SCOPE extern __declspec (dllexport)
+#  endif
+# else
+#  define LIBL3_SCOPE extern __declspec (dllimport)
+# endif
+#endif
+#ifndef LIBL3_SCOPE
+# define LIBL3_SCOPE extern
+#endif
+
+__BEGIN_DECLS
+LIBL3_SCOPE int var_l3;
+int	func_l3 __P((int));
+__END_DECLS
+
+#endif /* !_L3_H_ */
diff --git a/tests/depdemo/l4/Makefile.am b/tests/depdemo/l4/Makefile.am
new file mode 100644
index 0000000..fa0d4b2
--- /dev/null
+++ b/tests/depdemo/l4/Makefile.am
@@ -0,0 +1,34 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2010 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+top_distdir = ../..
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+
+AM_CPPFLAGS = -I$(top_srcdir) -DBUILDING_LIBL4
+
+lib_LTLIBRARIES = libl4.la
+libl4_la_SOURCES = l4.c l4.h
+libl4_la_LDFLAGS = -no-undefined
+libl4_la_LIBADD = $(top_builddir)/l3/libl3.la $(LIBM)
diff --git a/tests/depdemo/l4/Makefile.in b/tests/depdemo/l4/Makefile.in
new file mode 100644
index 0000000..19f2008
--- /dev/null
+++ b/tests/depdemo/l4/Makefile.in
@@ -0,0 +1,516 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = l4
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+am__DEPENDENCIES_1 =
+libl4_la_DEPENDENCIES = $(top_builddir)/l3/libl3.la \
+	$(am__DEPENDENCIES_1)
+am_libl4_la_OBJECTS = l4.lo
+libl4_la_OBJECTS = $(am_libl4_la_OBJECTS)
+libl4_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(libl4_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libl4_la_SOURCES)
+DIST_SOURCES = $(libl4_la_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC = @STATIC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+top_distdir = ../..
+AUTOMAKE_OPTIONS = no-dependencies foreign
+AM_CPPFLAGS = -I$(top_srcdir) -DBUILDING_LIBL4
+lib_LTLIBRARIES = libl4.la
+libl4_la_SOURCES = l4.c l4.h
+libl4_la_LDFLAGS = -no-undefined
+libl4_la_LIBADD = $(top_builddir)/l3/libl3.la $(LIBM)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign l4/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign l4/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libl4.la: $(libl4_la_OBJECTS) $(libl4_la_DEPENDENCIES) 
+	$(libl4_la_LINK) -rpath $(libdir) $(libl4_la_OBJECTS) $(libl4_la_LIBADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES)
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \
+	mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
+	clean-libLTLIBRARIES clean-libtool ctags distclean \
+	distclean-compile distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-libLTLIBRARIES
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/depdemo/l4/l4.c b/tests/depdemo/l4/l4.c
new file mode 100644
index 0000000..068a0d9
--- /dev/null
+++ b/tests/depdemo/l4/l4.c
@@ -0,0 +1,48 @@
+/* l4.c -- trivial test library
+
+   Copyright (C) 1998-1999 Thomas Tanner
+   Copyright (C) 2006, 2007 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "l4/l4.h"
+
+#include "l3/l3.h"
+#include <stdio.h>
+#include <math.h>
+
+int	var_l4 = 0;
+
+int
+func_l4 (int indent)
+{
+  int i;
+
+  for (i = 0; i < indent; i++)
+    putchar(' ');
+  printf("l4 (%i)\n", var_l4);
+  func_l3(indent+1);
+  for (i = 0; i <= indent; i++)
+    putchar(' ');
+  printf("libm [sin(1.5) = %f]\n", sin(1.5));
+  var_l4 += var_l3;
+  return 0; 
+}
diff --git a/tests/depdemo/l4/l4.h b/tests/depdemo/l4/l4.h
new file mode 100644
index 0000000..703743f
--- /dev/null
+++ b/tests/depdemo/l4/l4.h
@@ -0,0 +1,50 @@
+/* l4.h -- interface to a trivial library
+
+   Copyright (C) 1998-1999 Thomas Tanner
+   Copyright (C) 2006, 2010 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#ifndef _L4_H_
+#define _L4_H_ 1
+
+#include "sysdep.h"
+
+#if (defined _WIN32 || defined _WIN32_WCE) && !defined __GNUC__
+# ifdef BUILDING_LIBL4
+#  ifdef DLL_EXPORT
+#   define LIBL4_SCOPE extern __declspec (dllexport)
+#  endif
+# else
+#  define LIBL4_SCOPE extern __declspec (dllimport)
+# endif
+#endif
+#ifndef LIBL4_SCOPE
+# define LIBL4_SCOPE extern
+#endif
+
+__BEGIN_DECLS
+LIBL4_SCOPE int var_l4;
+int	func_l4 __P((int));
+__END_DECLS
+
+#endif /* !_L4_H_ */
diff --git a/tests/depdemo/main.c b/tests/depdemo/main.c
new file mode 100644
index 0000000..c4569b3
--- /dev/null
+++ b/tests/depdemo/main.c
@@ -0,0 +1,48 @@
+/* main.c -- inter-library dependency test program
+
+   Copyright (C) 1998, 1999, 2000, 2006 Free Software Foundation
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "l1/l1.h"
+#include "l2/l2.h"
+#include "l4/l4.h"
+#include <stdio.h>
+#include <string.h>
+
+int
+main (int argc, char **argv)
+{
+  printf("dependencies:\n");
+  func_l1(0);
+  func_l2(0);
+  func_l4(0);
+  if (argc == 2 && strcmp (argv[1], "-alt") == 0
+      && var_l1 + var_l2 + var_l4 == 8)
+	return 0;
+  printf("var_l1(%d) + var_l2(%d) + var_l4(%d) == %d\n",var_l1,var_l2,var_l4, var_l1 + var_l2 + var_l4);
+  if (var_l1 + var_l2 + var_l4 != 20)
+	{
+	printf("var_l1(%d) + var_l2(%d) + var_l4(%d) != 20\n",var_l1,var_l2,var_l4);
+  	return 1;
+	}
+  return 0;
+}
diff --git a/tests/depdemo/sysdep.h b/tests/depdemo/sysdep.h
new file mode 100644
index 0000000..4430b61
--- /dev/null
+++ b/tests/depdemo/sysdep.h
@@ -0,0 +1,53 @@
+/* sysdep.h -- system dependent declarations
+
+   Copyright (C) 1998-1999 Thomas Tanner
+   Copyright (C) 2006 Free Software Foundation, Inc.
+   Written by Thomas Tanner 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#ifndef _SYSDEP_H_
+#define _SYSDEP_H_ 1
+
+/* __BEGIN_DECLS should be used at the beginning of your declarations,
+   so that C++ compilers don't mangle their names.  Use __END_DECLS at
+   the end of C declarations. */
+#undef __BEGIN_DECLS
+#undef __END_DECLS
+#ifdef __cplusplus
+# define __BEGIN_DECLS extern "C" {
+# define __END_DECLS }
+#else
+# define __BEGIN_DECLS /* empty */
+# define __END_DECLS /* empty */
+#endif
+
+/* __P is a macro used to wrap function prototypes, so that compilers
+   that don't understand ANSI C prototypes still work, and ANSI C
+   compilers can issue warnings about type mismatches. */
+#undef __P
+#if defined (__STDC__) || defined (_AIX) || (defined (__mips) && defined (_SYSTYPE_SVR4)) || defined(WIN32) || defined(__cplusplus)
+# define __P(protos) protos
+#else
+# define __P(protos) ()
+#endif
+
+#endif /* !_SYSDEP_H_ */
diff --git a/tests/deplib-in-subdir.at b/tests/deplib-in-subdir.at
new file mode 100644
index 0000000..048512a
--- /dev/null
+++ b/tests/deplib-in-subdir.at
@@ -0,0 +1,157 @@
+# deplib-in-subdir.at --                         -*- Autotest -*-
+
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# It should be possible to use a nontrivial relative path to the output
+# file name when creating libraries and programs.  The deplibs of these
+# might have relative paths as well.  When executing uninstalled programs,
+# the paths relative to $PWD at build time needs to be translated to a
+# path valid at execution time.
+#
+# Also test installing these libraries and programs; however,
+# use consistent relative paths between `libtool --mode=link' and
+# `libtool --mode=install' in this test.
+
+AT_SETUP([deplib in subdir])
+AT_KEYWORDS([libtool])
+
+AT_DATA([a1.c],
+[[int a1 () { return 0; }
+]])
+AT_DATA([a2.c],
+[[int a2 () { return 0; }
+]])
+AT_DATA([a3.c],
+[[int a3 () { return 0; }
+]])
+AT_DATA([b1.c],
+[[extern int a1 ();
+int b1 () { return a1 (); }
+]])
+AT_DATA([b2.c],
+[[extern int a2 ();
+int b2 () { return a2 (); }
+]])
+AT_DATA([b3.c],
+[[extern int a3 ();
+int b3 () { return a3 (); }
+]])
+AT_DATA([m.c],
+[[extern int b1 ();
+extern int b2 ();
+extern int b3 ();
+int main () { return b1 () + b2 () + b3 (); }
+]])
+
+cwd=`pwd`
+instdir=$cwd/inst
+lib1dir=$instdir/lib1
+lib2dir=$instdir/lib2
+bindir=$instdir/bin
+addrunpath=$cwd/foobar
+LDFLAGS="$LDFLAGS -no-undefined"
+
+flags='-export-symbols-regex ".*"'
+
+mkdir -p sub1 sub2/subsub sub3/subsub $instdir $lib1dir $lib2dir $bindir
+
+for file in a1.c a2.c a3.c b1.c b2.c b3.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+$CC $CPPFLAGS $CFLAGS -c m.c
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub1/liba1.la a1.lo -rpath $lib1dir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub1/liba2.la a2.lo -rpath $lib1dir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub1/liba3.la a3.lo -rpath $lib1dir],
+	 [], [ignore], [ignore])
+
+AT_CHECK([eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub2/subsub/libb1.la b1.lo ]dnl
+	 [-rpath $lib2dir sub1/liba1.la' "$flags"],
+	 [], [ignore], [ignore])
+cd sub2
+AT_CHECK([eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o subsub/libb2.la ../b2.lo ]dnl
+	 [-rpath $lib2dir ../sub1/liba2.la' "$flags"],
+	 [], [ignore], [ignore])
+cd subsub
+AT_CHECK([eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb3.la ../../b3.lo ]dnl
+	 [-rpath $lib2dir ../../sub1/liba3.la' "$flags"],
+	 [], [ignore], [ignore])
+cd ../..
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub3/subsub/m1$EXEEXT m.$OBJEXT ]dnl
+	 [sub2/subsub/libb1.la sub2/subsub/libb2.la sub2/subsub/libb3.la],
+	 [], [ignore], [ignore])
+cd sub3
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o subsub/m2$EXEEXT ../m.$OBJEXT ]dnl
+	 [../sub2/subsub/libb1.la ../sub2/subsub/libb2.la ../sub2/subsub/libb3.la],
+	 [], [ignore], [ignore])
+cd subsub
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m3$EXEEXT ../../m.$OBJEXT ]dnl
+	 [../../sub2/subsub/libb1.la ../../sub2/subsub/libb2.la ../../sub2/subsub/libb3.la],
+	 [], [ignore], [ignore])
+cd ../..
+
+for i in 1 2 3; do
+  LT_AT_EXEC_CHECK([./sub3/subsub/m$i])
+  cd sub3
+  LT_AT_EXEC_CHECK([./subsub/m$i])
+  cd subsub
+  LT_AT_EXEC_CHECK([./m$i])
+  cd ../..
+done
+
+for i in 1 2 3; do
+  AT_CHECK([$LIBTOOL --mode=install cp sub1/liba$i.la $lib1dir/liba.la], [], [ignore], [ignore])
+done
+
+AT_CHECK([$LIBTOOL --mode=install cp sub2/subsub/libb1.la $lib2dir/libb1.la], [], [ignore], [ignore])
+cd sub2
+AT_CHECK([$LIBTOOL --mode=install cp subsub/libb2.la $lib2dir/libb2.la], [], [ignore], [ignore])
+cd subsub
+AT_CHECK([$LIBTOOL --mode=install cp libb3.la $lib2dir/libb3.la], [], [ignore], [ignore])
+cd ../..
+
+AT_CHECK([$LIBTOOL --mode=install cp sub3/subsub/m1$EXEEXT $bindir/m1$EXEEXT], [], [ignore], [ignore])
+cd sub3
+AT_CHECK([$LIBTOOL --mode=install cp subsub/m2$EXEEXT $bindir/m2$EXEEXT], [], [ignore], [ignore])
+cd subsub
+AT_CHECK([$LIBTOOL --mode=install cp m3$EXEEXT $bindir/m3$EXEEXT], [], [ignore], [ignore])
+cd ../..
+
+AT_CHECK([$LIBTOOL --mode=clean rm -f sub1/liba1.la sub1/liba2.la sub1/liba3.la ]dnl
+	 [sub2/subsub/libb1.la sub2/subsub/libb2.la sub2/subsub/libb3.la ]dnl
+	 [sub3/subsub/m1$EXEEXT sub3/subsub/m2$EXEEXT sub3/subsub/m3$EXEEXT],
+	 [], [ignore], [ignore])
+
+for i in 1 2 3; do
+  LT_AT_EXEC_CHECK([$bindir/m$i$EXEEXT])
+  cd $bindir
+  LT_AT_EXEC_CHECK([./m$i$EXEEXT])
+  cd $cwd
+done
+
+PATH=$bindir${PATH_SEPARATOR-:}$PATH
+for i in 1 2 3; do
+  LT_AT_EXEC_CHECK([m$i$EXEEXT])
+done
+
+AT_CLEANUP
diff --git a/tests/deplibs-ident.at b/tests/deplibs-ident.at
new file mode 100644
index 0000000..5758311
--- /dev/null
+++ b/tests/deplibs-ident.at
@@ -0,0 +1,76 @@
+# deplibs-ident.at -- detecting identical deplibs              -*- Autotest -*-
+
+#   Copyright (C) 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Detecting identical deplibs.])
+
+
+## ----------------------------------------------- ##
+## Different relative paths within the build tree. ##
+## ----------------------------------------------- ##
+
+AT_SETUP([build tree relpaths])
+AT_KEYWORDS([libtool])
+
+mkdir a a/b c
+echo 'int c() { return 0; }' > c/libcee.c
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c c/libcee.c -o c/libcee.lo],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o c/libcee.la c/libcee.lo -rpath /nowhere],
+	 [0],[ignore],[ignore])
+
+depl_1=../c/libcee.la
+depl_2=`pwd`/c/libcee.la
+depl_3="-L../c -lcee"
+
+(
+  cd a
+  for i in 1 2 3; do
+    eval depend_on_c=\"\$depl_$i\"
+    echo "extern int c(void); int a$i() { return c(); }" > liba$i.c
+    AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba$i.c],
+	     [0],[ignore],[ignore])
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la liba$i.lo $depend_on_c -rpath /nowhere],
+	   [0],[ignore],[ignore])
+  done
+)
+
+AT_DATA([a/b/b.c],
+[[extern int a1(void), a2(void), a3(void), c(void);
+int main() { return a1() + a2() + a3() + c(); }
+]])
+
+(
+  cd a/b
+  AT_CHECK([$CC $CFLAGS -c b.c],[0],[ignore],[ignore])
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o b$EXEEXT b.$OBJEXT ../liba1.la ../liba2.la ../liba3.la ../../c/libcee.la -rpath /nowhere],
+	   [0],[stdout],[ignore])
+  AT_CHECK([$EGREP 'cee.*cee' stdout], 1, [ignore], [ignore])
+  AT_XFAIL_IF([case $host in
+                 *-*-aix*|hppa*-*-hpux*|*-*-interix*|*-*-openbsd*) false;;
+                 *):;;
+               esac])
+  dnl This is currently broken in libtool
+)
+
+AT_CLEANUP
diff --git a/tests/deplibs-mingw.at b/tests/deplibs-mingw.at
new file mode 100644
index 0000000..45aa032
--- /dev/null
+++ b/tests/deplibs-mingw.at
@@ -0,0 +1,94 @@
+# deplibs-mingw.at --                         -*- Autotest -*-
+
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Check that deplibs are detected correctly even if there is no `file'
+# command installed.
+
+AT_SETUP([deplibs without file command])
+AT_KEYWORDS([libtool])
+
+cwd=`pwd`
+instdir=$cwd/inst
+libdir=$instdir/lib
+bindir=$instdir/bin
+LDFLAGS="$LDFLAGS -no-undefined"
+
+mkdir inst inst/bin inst/lib
+
+AT_DATA([a.c],
+[[int a () { return 0; }
+]])
+AT_DATA([b.c],
+[[extern int a ();
+int b () { return a (); }
+]])
+
+for file in a.c b.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([library_names= && . ./liba.la && if test -z "$library_names"; then exit 77; fi ],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp liba.la $libdir], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=clean rm -f liba.la], [], [ignore], [ignore])
+rm -f $libdir/liba.la
+
+# check once with `file' (if present) and once without, if on MinGW.
+for try in with-file without-file; do
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la b.lo -rpath $libdir ]dnl
+	   [-L$libdir -la],
+	   [], [ignore], [ignore])
+  AT_CHECK([library_names= && . ./libb.la && if test -z "$library_names"; then exit 99; fi ],
+	   [], [ignore], [ignore])
+
+  case $host_os in
+  mingw*)
+    if file /; then
+      mkdir bin new-libtool
+
+      cat >bin/file <<\EOF
+#! /bin/sh
+exit 1
+EOF
+      chmod +x bin/file
+      PATH=`pwd`/bin${PATH_SEPARATOR-:}$PATH
+      cd new-libtool
+      # configure might fail due to in-tree build of toplevel, or
+      # missing configure flags and other reasons.
+      LT_AT_CONFIGURE([|| exit 77], ["$abs_top_srcdir"/configure])
+      cd ..
+      LIBTOOL=new-libtool/libtool
+      export LIBTOOL
+      # Check whether the generated script is usable; otherwise, skip.
+      AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libunrelated.la a.lo -rpath $libdir] dnl
+	       [|| exit 77], [], [ignore], [ignore])
+    else
+      break;
+    fi;;
+  *)
+    break;;
+  esac
+done
+
+AT_CLEANUP
diff --git a/tests/destdir.at b/tests/destdir.at
new file mode 100644
index 0000000..386c728
--- /dev/null
+++ b/tests/destdir.at
@@ -0,0 +1,142 @@
+# destdir.at -- test various DESTDIR issues                   -*- Autotest -*-
+
+#   Copyright (C) 2006, 2007 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2006
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([DESTDIR tests])
+
+# Common setup for the next few tests.
+m4_pushdef([_LT_DIRSETUP],
+[# DESTDIR installs do not work with relink at install time.
+AT_XFAIL_IF([eval `$LIBTOOL --config | grep '^fast_install='`
+           case $fast_install in no) :;; *) false;; esac])
+LDFLAGS="$LDFLAGS -no-undefined"
+if test -n "$we_are_on_a_safe_system"; then # let's read shorter cmdlines.
+  DESTDIR=/tmp/dest
+  prefix=/tmp/inst
+  rm -rf $DESTDIR $prefix
+else
+  DESTDIR=`pwd`/dest
+  prefix=`pwd`/inst
+fi
+libdir=$prefix/lib
+bindir=$prefix/bin
+$mkdir_p src $prefix $DESTDIR $DESTDIR$prefix
+eval `$LIBTOOL --config | $EGREP '^(FGREP|OBJDUMP)='`
+])
+
+
+AT_SETUP([Simple DESTDIR install])
+AT_KEYWORDS([libtool])
+
+# A program that depends upon a library, both in the same package.
+_LT_DIRSETUP
+cd src
+echo 'int a() { return 0; }' > a.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir
+echo 'extern int a(); int main() { return a(); }' > m.c
+$CC $CPPFLAGS $CFLAGS -c m.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT m.$OBJEXT liba.la
+mkdir $DESTDIR$libdir $DESTDIR$bindir
+AT_CHECK([$LIBTOOL --mode=install cp liba.la $DESTDIR$libdir/liba.la],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp m$EXEEXT $DESTDIR$bindir/m$EXEEXT],
+	 [], [ignore], [ignore])
+$LIBTOOL --mode=clean rm -f liba.la m
+LT_AT_MVDIR(["$DESTDIR$libdir"], ["$libdir"])
+LT_AT_MVDIR(["$DESTDIR$bindir"], ["$bindir"])
+# We ignore failure on purpose here: we may not be root.
+AT_CHECK([$LIBTOOL --mode=finish $libdir], [ignore], [ignore], [ignore])
+LT_AT_EXEC_CHECK([$bindir/m$EXEEXT])
+
+AT_CLEANUP
+
+
+AT_SETUP([DESTDIR with in-package deplibs])
+AT_KEYWORDS([libtool])
+
+# A program that depends upon a library that depends upon another
+# library, all in the same package.  Use two deplibs, one in $libdir
+# and one in another directory.
+_LT_DIRSETUP
+cd src
+echo 'int a1dep() { return 0; }' > a1dep.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a1dep.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba1dep.la a1dep.lo -rpath $libdir
+echo 'int a2dep() { return 0; }' > a2dep.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a2dep.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba2dep.la a2dep.lo -rpath ${libdir}2
+echo 'extern int a1dep(), a2dep(); int a() { return a1dep() + a2dep(); }' > a.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir liba1dep.la liba2dep.la
+echo 'extern int a(); int main() { return a(); }' > m.c
+$CC $CPPFLAGS $CFLAGS -c m.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT m.$OBJEXT liba.la
+mkdir $DESTDIR$libdir $DESTDIR${libdir}2 $DESTDIR$bindir
+AT_CHECK([$LIBTOOL --mode=install cp liba1dep.la $DESTDIR$libdir/liba1dep.la],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp liba2dep.la $DESTDIR${libdir}2/liba2dep.la],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp liba.la $DESTDIR$libdir/liba.la],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp m$EXEEXT $DESTDIR$bindir/m$EXEEXT],
+	 [], [ignore], [ignore])
+$LIBTOOL --mode=clean rm -f liba1dep.la liba2dep.la liba.la m
+LT_AT_MVDIR(["$DESTDIR$libdir"], ["$libdir"])
+LT_AT_MVDIR(["$DESTDIR${libdir}2"], ["${libdir}2"])
+LT_AT_MVDIR(["$DESTDIR$bindir"], ["$bindir"])
+# We ignore failure on purpose here: we may not be root.
+AT_CHECK([$LIBTOOL --mode=finish $libdir ${libdir}2], [ignore], [ignore], [ignore])
+
+# put false libraries in the DESTDIR paths: if the installed program
+# refers to them, that is a bug.
+mkdir $DESTDIR$libdir $DESTDIR${libdir}2 $DESTDIR$bindir
+for lib in a1dep a2dep a; do
+  case $lib in
+  a2dep) ldir=${libdir}2;;
+  *)     ldir=$libdir;;
+  esac
+  echo "int this_should_not_be_linked_against () { return 0; }" > $lib.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $lib.c
+  # Note the rpath argument includes $DESTDIR: the installed false libs
+  # should be functional (i.e., not need `libtool --mode=finish').
+  $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o lib$lib.la $lib.lo -rpath $DESTDIR$ldir
+  $LIBTOOL --mode=install cp lib$lib.la $DESTDIR$ldir/lib$lib.la
+done
+
+LT_AT_EXEC_CHECK([$bindir/m$EXEEXT])
+
+# TODO: make this more portable:
+if test "$OBJDUMP" != false && ($OBJDUMP -p $bindir/m$EXEEXT) >/dev/null 2>&1; then
+  AT_CHECK([$OBJDUMP -p $bindir/m$EXEEXT | $EGREP -i "R(UN)?PATH.*$DESTDIR"], [1])
+  . $libdir/liba.la
+  set x $library_names
+  lname=$2
+  if test -n "$lname"; then
+    AT_CHECK([$OBJDUMP -p $libdir/$lname | $EGREP -i "R(UN)?PATH.*$DESTDIR"], [1])
+  fi
+fi
+
+AT_CLEANUP
+
+m4_popdef([_LT_DIRSETUP])
diff --git a/tests/dlloader-api.at b/tests/dlloader-api.at
new file mode 100644
index 0000000..5eeafba
--- /dev/null
+++ b/tests/dlloader-api.at
@@ -0,0 +1,441 @@
+# dlloader.at -- test dlloader functionality                -*- Autotest -*-
+#
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([dlloader API])
+AT_KEYWORDS([libltdl])
+
+AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+static int
+first_init (lt_user_data data)
+{
+  const char *ctx = (const char *) data;
+
+  printf ("first_init: %s\n", ctx);
+
+  return 0;
+}
+
+static lt_module
+first_open (lt_user_data data, const char *filename, lt_dladvise advise)
+{
+  static const char *first_module = "first";
+  const char *ctx = (const char *) data;
+
+  /* Use a magic string to avoid possible interactions with filesystem
+   * objects.  Prepend '/' to short-circuit libltdl's search of
+   * $shlibpath_var (e.g. PATH, LD_LIBRARY_PATH, or similar).
+   */
+  if (!filename || strcmp (filename, "/libltdl_dlloader_api_test_first"))
+    {
+      printf ("first_open denies a request\n");
+      lt_dlseterror (LT_ERROR_FILE_NOT_FOUND);
+      return NULL;
+    }
+
+  printf ("first_open (\"%s\"): %s\n", filename, ctx);
+
+  return (lt_module) first_module;
+}
+
+static const char *
+first_symbol (void)
+{
+  return "first_symbol";
+}
+
+static void *
+first_sym (lt_user_data data, lt_module module, const char *symbolname)
+{
+  const char *ctx = (const char *) data;
+  const char *filename = (const char *) module;
+
+  printf ("first_sym (%s): %s\n", filename, ctx);
+
+  return (void *) first_symbol;
+}
+
+static int
+first_close (lt_user_data data, lt_module module)
+{
+  const char *ctx = (const char *) data;
+  const char *filename = (const char *) module;
+
+  printf ("first_close (%s): %s\n", filename, ctx);
+
+  return 0;
+}
+
+static int
+first_exit (lt_user_data data)
+{
+  const char *ctx = (const char *) data;
+
+  printf ("first_exit: %s\n", ctx);
+
+  return 0;
+}
+
+static int
+last_init (lt_user_data data)
+{
+  const char *ctx = (const char *) data;
+
+  printf ("last_init: %s\n", ctx);
+
+  return 0;
+}
+
+static lt_module
+last_open (lt_user_data data, const char *filename, lt_dladvise advise)
+{
+  static const char *last_module = "last";
+  const char *ctx = (const char *) data;
+
+  /* Use a magic string to avoid possible interactions with filesystem
+   * objects.  Prepend '/' to short-circuit libltdl's search of
+   * $shlibpath_var (e.g. PATH, LD_LIBRARY_PATH, or similar).
+   */
+  if (!filename || strcmp (filename, "/libltdl_dlloader_api_test_last"))
+    {
+      printf ("last_open denies a request\n");
+      lt_dlseterror (LT_ERROR_FILE_NOT_FOUND);
+      return NULL;
+    }
+
+  printf ("last_open (\"%s\"): %s\n", filename, ctx);
+
+  return (lt_module) last_module;
+}
+
+static const char *
+last_symbol (void)
+{
+  return "last_symbol";
+}
+
+static void *
+last_sym (lt_user_data data, lt_module module, const char *symbolname)
+{
+  const char *ctx = (const char *) data;
+  const char *filename = (const char *) module;
+
+  printf ("last_sym (%s): %s\n", filename, ctx);
+
+  return (void *) last_symbol;
+}
+
+static int
+last_close (lt_user_data data, lt_module module)
+{
+  const char *ctx = (const char *) data;
+  const char *filename = (const char *) module;
+
+  printf ("last_close (%s): %s\n", filename, ctx);
+
+  return 0;
+}
+
+static int
+last_exit (lt_user_data data)
+{
+  const char *ctx = (const char *) data;
+
+  printf ("last_exit: %s\n", ctx);
+
+  return 0;
+}
+
+typedef const char *module_func (void);
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlvtable *first;
+  lt_dlvtable *last;
+  lt_dlhandle module = NULL;
+  module_func *symbol;
+  const char *first_ctx = "first_ctx";
+  const char *last_ctx = "last_ctx";
+  const lt_dlvtable *finder;
+
+  LTDL_SET_PRELOADED_SYMBOLS ();
+
+  if (lt_dlinit ())
+    {
+      printf ("lt_dlinit failed\n");
+      return 1;
+    }
+
+  first = (lt_dlvtable *) malloc (sizeof (*first));
+  if (!first)
+    {
+      printf ("malloc failed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  first->name = "first";
+  first->sym_prefix = NULL;
+  first->module_open = first_open;
+  first->module_close = first_close;
+  first->find_sym = first_sym;
+  first->dlloader_init = first_init; /* test that it isn't called twice */
+  first->dlloader_exit = first_exit;
+  first->dlloader_data = (lt_user_data) first_ctx;
+  first->priority = LT_DLLOADER_PREPEND;
+
+  if (first_init (first->dlloader_data))
+    {
+      printf ("first_init failed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  if (lt_dlloader_add (first))
+    {
+      printf ("lt_dlloader_add failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  finder = lt_dlloader_find ("first");
+
+  if (!finder)
+    {
+      printf ("lt_dlloader_find failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("Found loader \"%s\"\n", finder->name);
+
+  last = (lt_dlvtable *) malloc (sizeof (*last));
+  if (!last)
+    {
+      printf ("malloc failed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  last->name = "last";
+  last->sym_prefix = NULL;
+  last->module_open = last_open;
+  last->module_close = last_close;
+  last->find_sym = last_sym;
+  last->dlloader_init = last_init; /* test that it isn't called twice */
+  last->dlloader_exit = last_exit;
+  last->dlloader_data = (lt_user_data) last_ctx;
+  last->priority = LT_DLLOADER_APPEND;
+
+  if (last_init (last->dlloader_data))
+    {
+      printf ("last_init failed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  if (lt_dlloader_add (last))
+    {
+      printf ("lt_dlloader_add failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  finder = lt_dlloader_find ("last");
+
+  if (!finder)
+    {
+      printf ("lt_dlloader_find failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("Found loader \"%s\"\n", finder->name);
+
+  /* Use a magic string to avoid possible interactions with filesystem
+   * objects.  Prepend '/' to short-circuit libltdl's search of
+   * $shlibpath_var (e.g. PATH, LD_LIBRARY_PATH, or similar).
+   */
+  module = lt_dlopen ("/libltdl_dlloader_api_test_first");
+
+  if (!module)
+    {
+      printf ("lt_dlopen failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  symbol = (module_func *) lt_dlsym (module, "symbol");
+
+  if (!symbol)
+    {
+      printf ("lt_dlsym failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("result: %s\n", symbol ());
+
+  lt_dlclose (module);
+  module = lt_dlopen ("./module.la");
+
+  if (!module)
+    {
+      printf ("lt_dlopen failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  symbol = (module_func *) lt_dlsym (module, "symbol");
+
+  if (!symbol)
+    {
+      printf ("lt_dlsym failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("result: %s\n", symbol ());
+
+  lt_dlclose (module);
+
+  /* Use a magic string to avoid possible interactions with filesystem
+   * objects.  Prepend '/' to short-circuit libltdl's search of
+   * $shlibpath_var (e.g. PATH, LD_LIBRARY_PATH, or similar).
+   */
+  module = lt_dlopen ("/libltdl_dlloader_api_test_last");
+
+  if (!module)
+    {
+      printf ("lt_dlopen failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  symbol = (module_func *) lt_dlsym (module, "symbol");
+
+  if (!symbol)
+    {
+      printf ("lt_dlsym failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("result: %s\n", symbol ());
+
+  if (lt_dlopen ("no-module"))
+    {
+      printf ("lt_dlopen unexpectedly opened \"no-module\"\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  if (lt_dlloader_remove ("first") != first)
+    {
+      printf ("vtable of first loader has changed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  free (first);
+
+cleanup:
+  if (module)
+    {
+      lt_dlclose (module);
+    }
+  lt_dlexit ();
+  return err;
+}
+]])
+
+AT_DATA([module.c],
+[[
+#ifdef __cplusplus
+extern "C"
+#endif
+const char *symbol (void);
+const char *
+symbol (void)
+{
+  return "module_symbol";
+}
+]])
+
+LT_AT_HOST_DATA(expout,
+[[first_init: first_ctx
+Found loader "first"
+last_init: last_ctx
+Found loader "last"
+first_open ("/libltdl_dlloader_api_test_first"): first_ctx
+first_sym (first): first_ctx
+result: first_symbol
+first_close (first): first_ctx
+first_open denies a request
+result: module_symbol
+first_open denies a request
+last_open ("/libltdl_dlloader_api_test_last"): last_ctx
+last_sym (last): last_ctx
+result: last_symbol
+first_open denies a request
+last_open denies a request
+first_exit: first_ctx
+last_close (last): last_ctx
+last_exit: last_ctx
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c module.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o module.la ]dnl
+	 [-rpath /nowhere -module -avoid-version -no-undefined ]dnl
+	 [module.lo],
+	 [], [ignore], [ignore])
+
+dnl Not possible to override the preopen loader, so skip if not shared.
+. ./module.la
+AT_CHECK([test -n "$dlname" || (exit 77)])
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c main.c], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT ]dnl
+	 [main.$OBJEXT -dlopen module.la $LIBLTDL],
+	 [], [ignore], [ignore])
+
+LT_AT_EXEC_CHECK([./main], [], [expout], [ignore], [])
+
+AT_CLEANUP
diff --git a/tests/dumpbin-symbols.at b/tests/dumpbin-symbols.at
new file mode 100644
index 0000000..19e61ba
--- /dev/null
+++ b/tests/dumpbin-symbols.at
@@ -0,0 +1,111 @@
+# dumpbin-symbols.at -- libtool "dumpbin -symbols" support    -*- Autotest -*-
+
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Windows tests.])
+AT_SETUP([dumpbin -symbols section hiding])
+
+# I don't know of a stable way to create a pair of objects that
+# exhibits the potential problem, so this test fakes it by
+# testing with output from a case that do have the potential
+# problem.
+
+# First check if the global_symbol_pipe can handle the below
+# test case at all, and skip if $NM is not MS dumpbin.
+
+AT_DATA([variable.c],
+[[
+int some_variable = 0;
+]])
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c variable.c], [], [ignore], [ignore])
+AT_CHECK([$NM variable.$OBJEXT], [], [stdout], [ignore])
+AT_CHECK([grep 'External.*some_variable' stdout || exit 77], [], [ignore])
+
+eval `$LIBTOOL --config | $EGREP '^(global_symbol_pipe)='`
+
+AT_DATA([dumpbin-output],
+[[
+Dump of file foo.obj
+
+File Type: COFF OBJECT
+
+COFF SYMBOL TABLE
+000 00AB766F ABS    notype       Static       | @comp.id
+001 00000001 ABS    notype       Static       | @feat.00
+002 00000000 SECT1  notype       Static       | .drectve
+    Section length   8F, #relocs    0, #linenums    0, checksum        0
+004 00000000 SECT2  notype       Static       | .debug$S
+    Section length 44B4, #relocs   1C, #linenums    0, checksum        0
+006 00000000 SECT3  notype       Static       | .rdata
+    Section length    1, #relocs    0, #linenums    0, checksum        0, selection    2 (pick any)
+008 00000000 SECT3  notype       External     | ?value@?$integral_constant@_N$0A@@tr1@std@@2_NB (public: static bool const std::tr1::integral_constant<bool,0>::value)
+009 00000000 SECT4  notype       Static       | .rdata
+    Section length    1, #relocs    0, #linenums    0, checksum 77073096, selection    2 (pick any)
+*snip lots of uninteresting crap*
+12A 00000000 SECT5B notype       Static       | .text
+    Section length   4B, #relocs    2, #linenums    0, checksum 22AE8362, selection    2 (pick any)
+12C 00000000 SECT5C notype       Static       | .debug$S
+    Section length  150, #relocs    B, #linenums    0, checksum        0, selection    5 (pick associative Section 0x5B)
+12F 00000000 SECT5D notype       Static       | .debug$T
+    Section length   5C, #relocs    0, #linenums    0, checksum        0
+
+String Table Size = 0x15EF bytes
+
+
+Dump of file conv.lib
+
+File Type: LIBRARY
+
+COFF SYMBOL TABLE
+000 00AB766F ABS    notype       Static       | @comp.id
+001 00000001 ABS    notype       Static       | @feat.00
+002 00000000 SECT1  notype       Static       | .drectve
+    Section length   2F, #relocs    0, #linenums    0, checksum        0
+004 00000000 SECT2  notype       Static       | .debug$S
+    Section length  70C, #relocs    5, #linenums    0, checksum        0
+006 00000000 SECT3  notype       Static       | .text
+    Section length    A, #relocs    0, #linenums    0, checksum BAFC81C1
+008 00000000 SECT3  notype ()    External     | _convenience
+009 00000000 SECT4  notype       Static       | .debug$T
+    Section length   5C, #relocs    0, #linenums    0, checksum        0
+
+String Table Size = 0x11 bytes
+
+  Summary
+
+        5B3C .debug$S
+          B8 .debug$T
+          BE .drectve
+         129 .rdata
+           C .sxdata
+         613 .text
+          6C .text$x
+          B8 .xdata$x
+]])
+
+# Check if the _convenience symbol from section SECT3 in conv.lib is
+# present even if section SECT3 in foo.obj is hidden.
+AT_CHECK([< dumpbin-output eval "$global_symbol_pipe"], [], [stdout])
+AT_CHECK([grep convenience stdout], [], [ignore])
+
+AT_CLEANUP
diff --git a/tests/duplicate_conv.at b/tests/duplicate_conv.at
new file mode 100644
index 0000000..77496d0
--- /dev/null
+++ b/tests/duplicate_conv.at
@@ -0,0 +1,91 @@
+# duplicate_conv.at -- duplicate convenience archive names   -*- Autotest -*-
+
+#   Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2006
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([duplicate convenience archive names])
+AT_KEYWORDS([libtool])
+
+eval `$LIBTOOL --config | sed -n '/^reload_cmds=/,/^$/p'`
+
+# We create two convenience archives with the same name, and _also_
+# containing an object with the same name.  This is necessary to detect
+# the failure with both 1.5.22 and HEAD, since the latter does not (did
+# not?) remove the temporary output directory, thus masking the failure
+# when all objects have distinct names.
+
+mkdir a b c
+
+echo 'int a () { return 0; }' > a/a.c
+echo 'int a2() { return 0; }' > b/a.c
+echo 'int b () { return 0; }' > b/b.c
+echo 'extern int a(), a2(), b(); int c() { return a() + a2() + b(); }' > c.c
+echo 'extern int c(); int main() { return c(); }' > main.c
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a/a.c -o a/a.lo
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c b/a.c -o b/a.lo
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c b/b.c -o b/b.lo
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c c.c
+$CC $CPPFLAGS $CFLAGS -c main.c
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o a/liba.la a/a.lo
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o b/liba.la b/a.lo b/b.lo
+
+# Fold into convenience archive.
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libcee.la c.lo a/liba.la b/liba.la],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la],
+	 [0], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./main],[0],[ignore],[ignore])
+$LIBTOOL --mode=clean rm -f libcee.la
+
+
+# FIXME: For this test, we may want to zero out whole_archive_flag_spec;
+#        OTOH, we'd like to test the other situation, too.
+
+# Fold into static library.
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -rpath /foo -static -o libcee.la c.lo a/liba.la b/liba.la],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la],
+	 [0], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./main],[0],[ignore],[ignore])
+$LIBTOOL --mode=clean rm -f libcee.la
+
+# Fold into library.
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -rpath /foo -o libcee.la c.lo a/liba.la b/liba.la],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la],
+	 [0], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./main],[0],[ignore],[ignore])
+$LIBTOOL --mode=clean rm -f libcee.la
+
+AT_CHECK([test "x$reload_cmds" = xfalse && exit 77], [1])
+
+# Test whether this works with reloadable objects as well.
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o cee.$OBJEXT c.lo a/liba.la b/liba.la],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT cee.$OBJEXT],
+	 [0], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./main],[0],[ignore],[ignore])
+
+# TODO: test dlpreloading of duplicates (when it is implemented)
+
+AT_CLEANUP
diff --git a/tests/duplicate_deps.at b/tests/duplicate_deps.at
new file mode 100644
index 0000000..2178440
--- /dev/null
+++ b/tests/duplicate_deps.at
@@ -0,0 +1,76 @@
+# duplicate_deps.at -- preserve duplicate convenience deps    -*- Autotest -*-
+
+#   Copyright (C) 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2006
+$
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([preserve duplicate convenience deps])
+AT_KEYWORDS([libtool])
+
+# --preserve-dup-deps should work for convenience archives.
+
+# Create a circular dependency of liba and libb:
+# a1 pulls in b1, that pulls in a2.
+cat >a1.c <<\EOF
+extern int b1 ();
+int a1 () { return b1 (); }
+EOF
+cat >a2.c <<\EOF
+int a2 () { return 0; }
+EOF
+cat >b1.c <<\EOF
+extern int a2 ();
+int b1 () { return a2 (); }
+EOF
+cat >main.c <<\EOF
+extern int a1 ();
+int main () { return a1 (); }
+EOF
+
+for file in a1.c a2.c b1.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+$CC $CPPFLAGS $CFLAGS -c main.c
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o liba.la a1.lo a2.lo
+
+# This could be worked around by adding liba.la to libb.la
+# (in that case all objects from liba would be merged into
+# libb.a as well, possibly renamed.)
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libb.la b1.lo liba.la
+AT_CHECK([$LIBTOOL --mode=link --tag=CC \
+	  $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la libb.la],
+	  [0], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./main])
+
+# Forgo the workaround and create a true circular dependency.
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libb.la b1.lo
+# Some systems find all symbols anyway; skip this test on such systems.
+AT_CHECK([$LIBTOOL --mode=link --tag=CC \
+	  $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la libb.la liba.la \
+	  && exit 77],
+	  [1], [ignore], [ignore])
+# Other systems need special treatment, which currently fails.
+AT_XFAIL_IF([:])
+AT_CHECK([$LIBTOOL --mode=link --preserve-dup-deps --tag=CC \
+	  $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la libb.la liba.la],
+	  [0], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/duplicate_members.at b/tests/duplicate_members.at
new file mode 100755
index 0000000..4f054f7
--- /dev/null
+++ b/tests/duplicate_members.at
@@ -0,0 +1,77 @@
+# duplicate_members.at -- duplicate members in archive tests  -*- Autotest -*-
+
+#   Copyright (C) 2005, 2007, 2008, 2009 Free Software Foundation, Inc.
+#   Written by Alexandre Oliva & Peter O'Gorman, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([duplicate members in archive tests])
+AT_KEYWORDS([libtool])
+
+# we don't want to use whole_archive_flag_spec, even if available
+sed -e 's|^whole_archive_flag_spec=.*|whole_archive_flag_spec=|g' < $LIBTOOL > libtool
+
+chmod +x ./libtool
+LIBTOOL=./libtool
+
+AT_DATA(bar.c,
+[[extern int foo1 (), foo2 (), foo3 (), foo4 (), foo5 (), foo6 ();
+int bar() {
+    int result = foo1 () + foo2 () + foo3 () + foo4 () + foo5 () + foo6 ();
+    return result;
+}
+]])
+
+AT_DATA(main.c,
+[[int bar();
+int main()
+{
+if (bar() == 21) return 0;
+return 1;
+}
+]])
+
+
+for a in 1 2 3 4 5 6
+do
+  mkdir $a
+  echo "int foo$a() {return $a;}" > $a/a.c
+done
+
+
+for a in 1 2 3 4 5 6
+do
+  $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o $a/a.lo $a/a.c
+done
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libc0.la 6/a.lo
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libconv.la ]dnl
+	 [1/a.lo 2/a.lo 3/a.lo 4/a.lo 5/a.lo libc0.la], [], [ignore], [ignore])
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o bar.lo bar.c
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbar.la ]dnl
+	 [ bar.lo libconv.la -rpath /notexist], [], [ignore], [ignore])
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o main.lo main.c
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o main$EXEEXT ]dnl
+	 [main.lo ./libbar.la], [], [ignore], [ignore])
+
+LT_AT_EXEC_CHECK([./main],[0],[ignore],[ignore])
+
+AT_CLEANUP
diff --git a/tests/early-libtool.at b/tests/early-libtool.at
new file mode 100644
index 0000000..7cc40b9
--- /dev/null
+++ b/tests/early-libtool.at
@@ -0,0 +1,229 @@
+# early-libtool.at -- early libtool script generation         -*- Autotest -*-
+
+#   Copyright (C) 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([libtool script generation.])
+
+
+## --------------------------------------------- ##
+## Building libtool normally from config.status. ##
+## --------------------------------------------- ##
+
+AT_SETUP([config.status])
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtool-demo], ]]AT_PACKAGE_VERSION[[, ]]AT_PACKAGE_BUGREPORT[[)
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.in],
+[[prefix = @prefix@
+libdir = @libdir@
+top_builddir = .
+SHELL = @SHELL@
+DEFAULT_INCLUDES = -I. -I@srcdir@
+EXEEXT = @EXEEXT@
+LIBTOOL = @LIBTOOL@
+OBJEXT = @OBJEXT@
+
+CPPFLAGS = @CPPFLAGS@
+CFLAGS = @CFLAGS@
+LDFLAGS = @LDFLAGS@
+
+COMPILE = $(CC) $(CPPFLAGS) $(CFLAGS) $(DEFAULT_INCLUDES)
+LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(CPPFLAGS) $(CFLAGS) $(DEFAULT_INCLUDES)
+LINK = $(LIBTOOL) --mode=link --tag=CC $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+
+all: hell$(EXEEXT)
+
+libhello.la: hello.lo
+	$(LINK) -rpath $(libdir) hello.lo
+hell$(EXEEXT): main.$(OBJEXT) libhello.la
+	$(LINK) main.$(OBJEXT) libhello.la
+
+.SUFFIXES:
+.SUFFIXES: .c .$(OBJEXT) .lo
+
+.c.$(OBJEXT):
+	$(COMPILE) -c $<
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+]])
+
+AT_DATA([hello.c],
+[[#include <stdio.h>
+
+void
+hello (void)
+{
+  printf ("** This is not GNU Hello.  There is no built-in mail reader. **\n");
+}
+]])
+
+AT_DATA([main.c],
+[[#include <stdio.h>
+
+extern void hello (void);
+
+int
+main (void)
+{
+  printf ("Welcome to GNU Hell!\n");
+
+  hello ();
+
+  return 0;
+}
+]])
+
+cat > missing <<_EOF
+#! /bin/sh
+exit 0
+_EOF
+chmod a+x missing
+
+LT_AT_LIBTOOLIZE([--copy --verbose --install])
+LT_AT_ACLOCAL([-I m4])
+LT_AT_AUTOCONF([--force])
+LT_AT_CONFIGURE
+LT_AT_MAKE
+
+LT_AT_EXEC_CHECK([./hell], [0], [stdout])
+AT_CHECK([grep 'Welcome to GNU Hell' stdout], [], [ignore])
+AT_CHECK([grep 'This is not GNU Hello.' stdout],
+	 [], [ignore])
+
+AT_CLEANUP
+
+
+## ------------------------------------------ ##
+## Building and using libtool from config.lt. ##
+## ------------------------------------------ ##
+
+AT_SETUP([config.lt])
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtool-demo], ]]AT_PACKAGE_VERSION[[, ]]AT_PACKAGE_BUGREPORT[[)
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+LT_OUTPUT
+
+cat >hello.c <<\_EOF
+#include <stdio.h>
+
+void
+hello (void)
+{
+  printf ("** This is not GNU Hello.  There is no built-in mail reader. **\n");
+}
+_EOF
+
+# Prove that we can run libtool from inside configure:
+$SHELL ./libtool --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS \
+    -I. -I$srcdir -c -o hello.lo hello.c  || exit 1
+$SHELL ./libtool --mode=link --tag=CC $CC $CFLAGS $LDFLAGS \
+    -o libhello.la -rpath /notexist hello.lo || exit 1
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.in],
+[[prefix = @prefix@
+libdir = @libdir@
+top_builddir = .
+SHELL = @SHELL@
+DEFAULT_INCLUDES = -I. -I@srcdir@
+EXEEXT = @EXEEXT@
+LIBTOOL = @LIBTOOL@
+OBJEXT = @OBJEXT@
+
+CPPFLAGS = @CPPFLAGS@
+CFLAGS = @CFLAGS@
+LDFLAGS = @LDFLAGS@
+
+COMPILE = $(CC) $(CPPFLAGS) $(CFLAGS) $(DEFAULT_INCLUDES)
+LINK = $(LIBTOOL) --mode=link --tag=CC $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+
+all: hell$(EXEEXT)
+
+hell$(EXEEXT): main.$(OBJEXT) libhello.la
+	$(LINK) main.$(OBJEXT) libhello.la
+
+.SUFFIXES:
+.SUFFIXES: .c .$(OBJEXT)
+
+.c.$(OBJEXT):
+	$(COMPILE) -c $<
+]])
+
+AT_DATA([hello.c],
+[[#include <stdio.h>
+
+void
+hello (void)
+{
+  printf ("** This is not GNU Hello.  There is no built-in mail reader. **\n");
+}
+]])
+
+AT_DATA([main.c],
+[[#include <stdio.h>
+
+extern void hello (void);
+
+int
+main (int argc, char *argv[])
+{
+  printf ("Welcome to GNU Hell!\n");
+
+  hello ();
+
+  return 0;
+}
+]])
+
+cat > missing <<_EOF
+#! /bin/sh
+exit 0
+_EOF
+chmod a+x missing
+
+LT_AT_LIBTOOLIZE([--copy --verbose --install])
+LT_AT_ACLOCAL([-I m4])
+LT_AT_AUTOCONF([--force])
+LT_AT_CONFIGURE
+LT_AT_MAKE
+
+LT_AT_EXEC_CHECK([./hell], [0], [stdout])
+AT_CHECK([grep 'Welcome to GNU Hell' stdout], [], [ignore])
+AT_CHECK([grep 'This is not GNU Hello.' stdout], [], [ignore])
+
+# Make sure config.status --recheck updates the libtool script
+rm libtool
+AT_CHECK([$SHELL ./config.status --recheck],[0],[ignore],[ignore])
+
+AT_CLEANUP
diff --git a/tests/exceptions.at b/tests/exceptions.at
new file mode 100644
index 0000000..286b2ac
--- /dev/null
+++ b/tests/exceptions.at
@@ -0,0 +1,401 @@
+# exception.at -- test C++ exception handling with libtool  -*- Autotest -*-
+#
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([C++ exception handling])
+AT_KEYWORDS([libtool])
+AT_KEYWORDS([libltdl])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+
+# Win32 (and cygwin) notes
+# ------------------------
+# When using C++ and Win32 DLLs, data types used in the DLL's interface
+# which are other-than-POD, must have vtables, typeinfo, and other
+# elements resolved when the client is linked.  This includes exception
+# classes.  Therefore, the exception class "modexc" thrown by the
+# dynamically-loaded module must be defined in a separate DLL, to which
+# both that module and main must be directly linked; hence, the 'common'
+# library. Not using a 'common' library in this manner represents an
+# ODR violation, unless the platform's runtime loader is capable of
+# rationalizing vague linkage items such as vtables, typeinfo, and
+# typename elements) at runtime.  The Win32 loader is not capable of
+# this, but some ELF loaders appear to be.
+#
+# Similar treatment is not necessary for liba (e.g. the libexc
+# exception class), because that library is not dynamically loaded. As a
+# consequence, vague linkage items for the class libexc are resolved at
+# link time using the vague linkage rules, for both Win32 and other
+# (e.g. ELF) platforms.
+#
+# Also, when linking a C++ DLL with another C++ DLL, some versions of
+# the GNU toolchain on Win32 (or cygwin) mistakenly re-export symbols
+# that were imported from the other DLL, when the client DLL is linked
+# using -export-all-symbols.  Similar issues MAY also arise with those
+# versions of the GNU toolchain if using the libtool link flags
+# -export-symbols LIST or -export-symbols-regex REGEX, if any symbols
+# from the dependency, rather than client, library are listed (or match
+# the regex).  However, in this test, none of these situations apply,
+# so we don't directly address it.  Otherwise, the correct mechanism
+# would be to avoid all of those flags, and instead explicitly decorate
+# all symbols with appropriate __declspec (dllexport) or
+# __declspec (dllimport) flags when building the DLLs and the clients.
+#
+# For more information, see these two threads:
+#   http://lists.gnu.org/archive/html/bug-libtool/2010-06/msg00069.html
+#   http://cygwin.com/ml/cygwin/2010-06/msg00392.html
+# To sum up: C++ is complicated.
+AT_DATA([common.h],
+[[#ifndef LIBTOOL_TEST_COMMON_HEADER
+#define LIBTOOL_TEST_COMMON_HEADER
+
+#include <exception>
+#include <string>
+
+#if defined(__CYGWIN__) || defined(_WIN32)
+# if defined(DLL_EXPORT) || defined(USING_COMMON_DLL)
+#  if defined(LIBTOOL_TEST_IN_COMMON)
+#   define COMMON_IMPEXP __declspec (dllexport)
+#  else
+#   define COMMON_IMPEXP __declspec (dllimport)
+#  endif
+# else
+#  define COMMON_IMPEXP
+# endif
+#else
+# define COMMON_IMPEXP
+#endif
+
+class COMMON_IMPEXP modexc : public std::exception {
+public:
+  modexc (std::string str) : message (str) { }
+  ~modexc () throw () { }
+  virtual const char *what () const throw ()
+  {
+    return message.c_str ();
+  }
+private:
+  std::string message;
+};
+
+extern "C" int COMMON_IMPEXP common_dummy (void);
+#endif
+]])
+
+AT_DATA([common.cpp],
+[[#define LIBTOOL_TEST_IN_COMMON
+#include "common.h"
+
+extern "C"
+int common_dummy (void)
+{
+  return 0;
+}
+]])
+
+AT_DATA([module.h],
+[[#include "common.h"
+
+#if defined(__CYGWIN__) || defined(_WIN32)
+# if defined(DLL_EXPORT) || defined(USING_MODULE_DLL)
+#  if defined(LIBTOOL_TEST_IN_MODULE)
+#   define MODULE_IMPEXP __declspec (dllexport)
+#  else
+#   define MODULE_IMPEXP __declspec (dllimport)
+#  endif
+# else
+#  define MODULE_IMPEXP
+# endif
+#else
+# define MODULE_IMPEXP
+#endif
+
+extern "C" int MODULE_IMPEXP modfoo () throw (modexc);
+]])
+
+AT_DATA([module.cpp],
+[[#include <iostream>
+#define LIBTOOL_TEST_IN_MODULE
+#include "module.h"
+
+int modbar (void) throw (modexc)
+{
+  throw modexc ("exception in module");
+}
+
+extern "C"
+int modfoo (void) throw (modexc)
+{
+  try {
+    modbar ();
+  }
+  catch (modexc e) {
+    std::cerr << "caught inside module: " << e.what () << '\n';
+    throw modexc ("exception from module");
+  }
+  return 0;
+}
+]])
+
+AT_DATA([lib.h],
+[[#include <exception>
+#include <string>
+
+
+#if defined(__CYGWIN__) || defined(_WIN32)
+# if defined(DLL_EXPORT) || defined(USING_LIB_DLL)
+#  if defined(LIBTOOL_TEST_IN_LIB)
+#   define LIB_IMPEXP __declspec (dllexport)
+#  else
+#   define LIB_IMPEXP __declspec (dllimport)
+#  endif
+# else
+#  define LIB_IMPEXP
+# endif
+#else
+# define LIB_IMPEXP
+#endif
+
+class LIB_IMPEXP libexc : public std::exception {
+public:
+  libexc (std::string str) : message (str) { }
+  ~libexc () throw () { }
+  virtual const char *what () const throw ()
+  {
+    return message.c_str ();
+  }
+private:
+  std::string message;
+};
+int LIB_IMPEXP libfoo () throw (libexc);
+]])
+
+AT_DATA([lib.cpp],
+[[#include <iostream>
+#define LIBTOOL_TEST_IN_LIB
+#include "lib.h"
+
+int libbar (void) throw (libexc)
+{
+  throw libexc ("exception in library");
+}
+
+int libfoo (void) throw (libexc)
+{
+  try {
+    libbar ();
+  }
+  catch (libexc e) {
+    std::cerr << "caught inside lib: " << e.what () << '\n';
+    throw libexc ("exception from library");
+  }
+  return 0;
+}
+]])
+
+AT_DATA([main.cpp],
+[[#include <ltdl.h>
+#include <cstdlib>
+#include <iostream>
+#include <exception>
+#include <string>
+#include "common.h"
+#include "lib.h"
+#include "module.h"
+
+class exc : public std::exception {
+public:
+  exc (std::string str) : message (str) { }
+  ~exc () throw () { }
+  virtual const char *what () const throw ()
+  {
+    return message.c_str ();
+  }
+private:
+  std::string message;
+};
+
+int foo (void) throw (exc)
+{
+  throw exc ("exception in program");
+  return 0;
+}
+
+int exceptions_in_prog (void)
+{
+  std::cerr << "exceptions_in_prog\n";
+  try {
+    foo ();
+  }
+  catch (exc e) {
+     std::cerr << "caught: " << e.what () << '\n';
+    return 0;
+  }
+  return 1;
+}
+
+int exceptions_in_lib (void)
+{
+  std::cerr << "exceptions_in_lib\n";
+  try {
+    libfoo ();
+  }
+  catch (libexc e) {
+     std::cerr << "caught: " << e.what () << '\n';
+    return 0;
+  }
+  return 1;
+}
+
+int exceptions_in_module (void)
+{
+  std::cerr << "exceptions_in_module\n";
+
+  if (lt_dlinit ())
+    {
+      std::cerr << "init error: " << lt_dlerror () << '\n';
+      return 1;
+    }
+
+  // Some systems need RTLD_GLOBAL for exceptions to work in modules.
+  lt_dladvise advise;
+  if (lt_dladvise_init (&advise) || lt_dladvise_global (&advise))
+    {
+      std::cerr << "error setting advise global\n";
+      return 1;
+    }
+
+  lt_dlhandle handle = lt_dlopenadvise ("module.la", advise);
+  if (handle == NULL)
+    {
+      std::cerr << "dlopen failed: " << lt_dlerror () << '\n';
+      return 1;
+    }
+  lt_dladvise_destroy (&advise);
+
+  typedef int (*pfun) (void);
+  pfun pf = (pfun) lt_dlsym (handle, "modfoo");
+  if (pf == NULL)
+    {
+      std::cerr << "dlsym failed: " << lt_dlerror () << '\n';
+      return 1;
+    }
+
+  bool exception_caught = false;
+  try {
+    (*pf) ();
+  }
+  catch (modexc e) {
+    std::cerr << "caught: " << e.what () << '\n';
+    exception_caught = true;
+  }
+
+  /* Only close the module after all of its objects have gone out of scope. */
+  if (exception_caught)
+  {
+    if (lt_dlclose (handle))
+      {
+        std::cerr << "dlclose failed: " << lt_dlerror () << '\n';
+	return 1;
+      }
+    if (lt_dlexit ())
+      {
+        std::cerr << "lt_dlexit failed: " << lt_dlerror () << '\n';
+	return 1;
+      }
+    return 0;
+  }
+  return 1;
+}
+
+int main (void)
+{
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (exceptions_in_prog ())
+    return 1;
+  if (exceptions_in_lib ())
+    return 1;
+  if (exceptions_in_module ())
+    return 1;
+  return 0;
+}
+]])
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+moddir=$inst/mod
+mkdir l m $inst $libdir $bindir $moddir
+
+# If the C++ compiler isn't capable, don't bother.
+AT_CHECK([$CXX $CPPFLAGS $CXXFLAGS -DUSING_COMMON_DLL -DUSING_MODULE_DLL -DUSING_LIB_DLL -c main.cpp || exit 77], [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CXX $CXX $CPPFLAGS $CXXFLAGS -c common.cpp],
+	   [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=compile --tag=CXX $CXX $CPPFLAGS $CXXFLAGS -c lib.cpp],
+	   [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=compile --tag=CXX $CXX $CPPFLAGS $CXXFLAGS -DUSING_COMMON_DLL -c module.cpp],
+	   [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o l/libcommon.la ]dnl
+	 [common.lo -no-undefined -version-info 1:0:0 -rpath $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o l/liba.la ]dnl
+	 [lib.lo -no-undefined -version-info 1:0:0 -rpath $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o m/module.la ]dnl
+	 [module.lo l/libcommon.la -module -avoid-version -no-undefined -rpath $moddir],
+	 [], [ignore], [ignore])
+
+# We need -export-dynamic for the exception handling in modules to work.
+AT_CHECK([$LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o main$EXEEXT ]dnl
+	 [main.$OBJEXT l/liba.la l/libcommon.la -dlopen m/module.la $LIBLTDL -export-dynamic],
+	 [], [ignore], [ignore])
+
+LT_AT_NOINST_EXEC_CHECK([./main], [-dlopen m/module.la], [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=install cp l/libcommon.la $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp l/liba.la $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp m/module.la $moddir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp main$EXEEXT $bindir],
+	 [], [ignore], [ignore])
+rm -rf l m main$EXEEXT
+
+LTDL_LIBRARY_PATH=$moddir
+export LTDL_LIBRARY_PATH
+LT_AT_EXEC_CHECK([$bindir/main], [], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/execute-mode.at b/tests/execute-mode.at
new file mode 100644
index 0000000..55f776c
--- /dev/null
+++ b/tests/execute-mode.at
@@ -0,0 +1,221 @@
+# execute-mode.at -- libtool --mode=execute             -*- Autotest -*-
+#
+#   Copyright (C) 2008, 2009, 2010 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2008
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([execute mode])
+AT_KEYWORDS([libtool])
+
+eval `$LIBTOOL --config | $EGREP '^(FGREP)='`
+
+AT_DATA([foo],
+[[#! /bin/sh
+if test $# -gt 0; then
+  for arg
+  do
+    printf %s\\n "$arg"
+  done
+else
+  :
+fi
+]])
+
+AT_DATA([lt-wrapper],
+[[#! /bin/sh
+# Generated by GNU libtool.
+# fake wrapper script.
+program=lt-real
+progdir=.
+if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+  # Run the actual program with our arguments.
+  exec "$progdir/$program" ${1+"$@"}
+  echo "$0: cannot exec $program $*" >&2
+  exit 1
+fi
+]])
+
+AT_DATA([lt-real],
+[[#! /bin/sh
+for arg
+do
+  printf %s\\n "$arg"
+done
+cat
+]])
+
+AT_DATA([libfakelib.la],
+[[# libfakelib.la - a libtool library file
+# Generated by ltmain.sh (GNU libtool 1.2605 2008/03/04 22:31:32) 2.3a
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+dlname=''
+library_names=''
+old_library='libfakelib.a'
+inherited_linker_flags=''
+dependency_libs=''
+weak_library_names=''
+current=
+age=
+revision=
+installed=no
+shouldnotlink=yes
+dlopen=''
+dlpreopen=''
+libdir=''
+]])
+
+mkdir sub
+cp foo sub/foo
+chmod +x foo sub/foo lt-wrapper lt-real
+
+AT_DATA([liba.c],
+[[int a () { return 0; }
+]])
+
+AT_DATA([main.c],
+[[#include <stdio.h>
+extern int a ();
+int main (int argc, char **argv)
+{
+  int i;
+  for (i=1; i<argc; ++i)
+    {
+      if (i != 1)
+	fputc ('\n', stdout);
+      fputs (argv[i], stdout);
+    }
+  fputc ('\n', stdout);
+  return a ();
+}
+]])
+
+LDFLAGS="$LDFLAGS -no-undefined"
+instdir=`pwd`/inst
+libdir=$instdir/lib
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la -rpath $libdir liba.lo],
+	 [], [ignore], [ignore])
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c main.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la],
+	 [], [ignore], [ignore])
+
+# end of preparatory blurb.
+# Now, when doing the tests, we both try the fake wrappers plus the real one
+# (only the latter exposes the C wrappers used for w32 systems).
+# With the latter, however, we need to ignore additional output; esp. wine
+# may be rather noisy.
+
+AT_CHECK([$LIBTOOL --mode=execute ./foo])
+AT_CHECK([$LIBTOOL --mode=execute sub/foo])
+AT_CHECK([$LIBTOOL --mode=execute ./foo foo], [], [foo
+])
+AT_CHECK([$LIBTOOL --mode=execute ./lt-wrapper foo </dev/null], [], [foo
+])
+AT_CHECK([cd sub && $LIBTOOL --mode=execute ./foo ../foo], [], [../foo
+])
+# suppose that ./foo is gdb, and lt-wrapper is the wrapper script.
+AT_CHECK([$LIBTOOL --mode=execute ./foo lt-wrapper bar baz </dev/null], [],
+	 [./lt-real
+bar
+baz
+])
+
+# check that stdin works even with -dlopen.
+AT_CHECK([echo bar | $LIBTOOL --mode=execute -dlopen libfakelib.la ./lt-wrapper foo],
+	 [], [foo
+bar
+])
+
+# Check that a missing real program causes an error.
+# The error message and code are likely to be 126,
+# "No such file or directory" but system-dependent.
+mv -f lt-real lt-backup
+AT_CHECK([$LIBTOOL --mode=execute ./lt-wrapper foo </dev/null || exit 1],
+	 [1], [ignore], [ignore])
+mv -f lt-backup lt-real
+
+# Now use arguments that require decent quoting.
+AT_CHECK([$LIBTOOL --mode=execute ./foo "arg  with special chars: \$!&*\`'()"],
+	 [], [arg  with special chars: $!&*`'()
+])
+AT_CHECK([$LIBTOOL --mode=execute ./lt-wrapper "arg  with special chars: \$!&*\`'()" </dev/null],
+	 [], [arg  with special chars: $!&*`'()
+])
+AT_CHECK([$LIBTOOL --mode=execute ./foo lt-wrapper "arg  with special chars: \$!&*\`'()"],
+	 [], [./lt-real
+arg  with special chars: $!&*`'()
+])
+LT_AT_NOINST_EXEC_CHECK([./main], [], [], [stdout], [ignore],
+			["arg  with special chars: \$!&*\`'()"])
+AT_CHECK([$FGREP 'arg  with special chars: $!&*`'\''()' stdout], [], [ignore])
+
+# We always pair two args.  The first one is never the empty string.
+arg1=
+for arg2 in \
+   'def ghi' '' \
+   'd"e' 'f"g' \
+   'd\"e' 'f\"g' \
+   'd\\"e' 'f\\"g' \
+   'd\\\"e' 'f\\\"g' \
+   'd\' '' \
+   'd\\' '' \
+   'd\\\' '' \
+   'd\\\\' '' \
+   '<' '>' \
+   '<def>' ''
+do
+  if test -z "$arg1"; then
+    arg1=$arg2; continue
+  fi
+  AT_CHECK([$LIBTOOL --mode=execute ./foo abc "$arg1" "$arg2" xyz], [], [stdout], [ignore])
+  AT_CHECK([$FGREP "$arg1" stdout], [], [ignore])
+  AT_CHECK([test -z "$arg2" || $FGREP "$arg2" stdout], [], [ignore])
+  AT_CHECK([test `sed -n '/^abc$/,/^xyz$/p' stdout | wc -l` -eq 4])
+  AT_CHECK([$LIBTOOL --mode=execute ./lt-wrapper abc "$arg1" "$arg2" xyz </dev/null], [], [stdout])
+  AT_CHECK([$FGREP "$arg1" stdout], [], [ignore])
+  AT_CHECK([test -z "$arg2" || $FGREP "$arg2" stdout], [], [ignore])
+  AT_CHECK([test `sed -n '/^abc$/,/^xyz$/p' stdout | wc -l` -eq 4])
+  AT_CHECK([$LIBTOOL --mode=execute ./foo lt-wrapper abc "$arg1" "$arg2" xyz], [], [stdout])
+  AT_CHECK([$FGREP "$arg1" stdout], [], [ignore])
+  AT_CHECK([test -z "$arg2" || $FGREP "$arg2" stdout], [], [ignore])
+  AT_CHECK([test `sed -n '/^abc$/,/^xyz$/p' stdout | wc -l` -eq 4])
+  AT_CHECK([$LIBTOOL --mode=execute ./main$EXEEXT abc "$arg1" "$arg2" xyz], [], [stdout])
+  AT_CHECK([$FGREP "$arg1" stdout], [], [ignore])
+  AT_CHECK([test -z "$arg2" || $FGREP "$arg2" stdout], [], [ignore])
+  # Do not match EOL here, cross setups may have an extra \r here.
+  AT_CHECK([test `sed -n '/^abc/,/^xyz/p' stdout | wc -l` -eq 4])
+  arg1=
+done
+
+# Check that .la files are not transformed by the wrapper searching loop.
+AT_CHECK([$LIBTOOL --mode=execute echo ./main$EXEEXT liba.lo libfakelib.la], [], [stdout])
+# This could be .libs/lt-main or similar (or just plain `main').
+AT_CHECK([grep main stdout], [], [ignore])
+AT_CHECK([grep liba.lo stdout], [], [ignore])
+AT_CHECK([grep libfakelib.la stdout], [], [ignore])
+
+AT_CLEANUP
diff --git a/tests/exeext.at b/tests/exeext.at
new file mode 100644
index 0000000..ee5d755
--- /dev/null
+++ b/tests/exeext.at
@@ -0,0 +1,53 @@
+# exeext.at -- ensure that exeext handling works  -*- Autotest -*-
+#
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#   Written by Peter Rosin
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AT_SETUP([both of -o prog and -o prog$EXEEXT work])
+AT_KEYWORDS([libtool])
+
+AT_CHECK([test -n "$EXEEXT" || exit 77])
+
+bin=`pwd`/bin
+binext=`pwd`/binext
+mkdir src $bin srcext $binext
+
+AT_DATA(src/prog.c,
+[[
+int main(void) { return 0; }
+]])
+
+$CC $CPPFLAGS $CFLAGS -c src/prog.c -o src/prog.$OBJEXT
+
+AT_CHECK($LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/prog src/prog.$OBJEXT,
+	 [0], [ignore], [ignore])
+AT_CHECK($LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o srcext/prog$EXEEXT src/prog.$OBJEXT,
+	 [0], [ignore], [ignore])
+
+$LIBTOOL --mode=install cp src/prog $bin/prog
+$LIBTOOL --mode=install cp srcext/prog$EXEEXT $binext/prog$EXEEXT
+
+LT_AT_EXEC_CHECK([$bin/prog])
+LT_AT_EXEC_CHECK([$binext/prog$EXEEXT])
+
+AT_CLEANUP
diff --git a/tests/export.at b/tests/export.at
new file mode 100644
index 0000000..39adfbc
--- /dev/null
+++ b/tests/export.at
@@ -0,0 +1,197 @@
+# export.at -- test symbol exports                           -*- Autotest -*-
+
+#   Copyright (C) 2007, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([Export test])
+AT_KEYWORDS([libtool])
+
+AT_CHECK([$LIBTOOL --features | grep 'disable shared libraries' && (exit 77)],
+	 [1], [ignore])
+AT_CHECK([eval `$LIBTOOL --config | sed -n '/^archive_expsym_cmds=/,/^$/p'`
+	  test -n "$archive_expsym_cmds" || echo false >can-hide
+	  case $archive_expsym_cmds in
+	  *-retain-symbols-file*) echo false >can-hide ;;
+	  esac])
+can_hide=:
+test -s can-hide && can_hide=false
+
+LDFLAGS="$LDFLAGS -no-undefined"
+libdir=`pwd`/inst/lib
+mkdir inst inst/lib
+
+AT_DATA(a.c,
+[[/* all kinds of data items */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+int v1;
+static int v2;
+int v3 = 0;
+int v4 = 1;
+extern const int v5, v6;
+extern const char *v7;
+extern const char v8[];
+extern int (*const v12) (void);
+const int v5 = 0;
+const int v6 = 1;
+const char* v7 = "\01foo";
+const char v8[] = "\01bar";
+int v9(void) { return v2 + 1; }
+int (*v10) (void);
+int (*v11) (void) = v9;
+int (*const v12) (void) = v9;
+
+typedef struct { int arr[1000]; } large;
+large v13;
+large v14 = { { 0 } };
+large v15 = { { 1 } };
+
+int w1 (void) { return 0; }
+
+#ifdef __cplusplus
+}
+#endif
+]])
+
+AT_DATA(asyms,
+[[v1
+v3
+v4
+v5
+v6
+v7
+v8
+v9
+v10
+v11
+v12
+v13
+v14
+v15
+]])
+
+AT_DATA(main.c,
+[[
+/* w32 fun.  With GCC, you can have auto-import, which will work for
+ * functions and non-const variables.  With MSVC, you have to explicitly
+ * import all variables.  Depending on the amount of portability, you
+ * need these annotations: LIBA_SCOPE for GCC, and also LIBA_SCOPE_VAR
+ * for MSVC.  Of course you can merge both to one, this test only avoids
+ * that in order to expose the auto-import feature on Cygwin.
+ *
+ * For users, it's best to realize that they should not provide any
+ * non-function API at all.
+ */
+#if defined(LIBA_DLL_IMPORT)
+#  if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__)
+#    define LIBA_SCOPE extern __declspec(dllimport)
+#    if defined(_MSC_VER)
+#      define LIBA_SCOPE_VAR LIBA_SCOPE
+#    endif
+#  endif
+#endif
+#if !defined(LIBA_SCOPE)
+#  define LIBA_SCOPE extern
+#endif
+#if !defined(LIBA_SCOPE_VAR)
+#  define LIBA_SCOPE_VAR extern
+#endif
+#ifdef __cplusplus
+extern "C" {
+#endif
+LIBA_SCOPE_VAR int v1;
+LIBA_SCOPE_VAR int v3, v4;
+LIBA_SCOPE const int v5, v6;
+LIBA_SCOPE_VAR const char* v7;
+LIBA_SCOPE_VAR const char v8[];
+extern int v9(void);
+LIBA_SCOPE_VAR int (*v10) (void);
+LIBA_SCOPE_VAR int (*v11) (void);
+LIBA_SCOPE int (*const v12) (void);
+#ifdef __cplusplus
+}
+#endif
+
+typedef struct { int arr[1000]; } large;
+LIBA_SCOPE_VAR large v13, v14, v15;
+
+int main (void)
+{
+  char s = v7[0] + v8[0];
+  return s + v1 + v3 + v4 + v5 + v6 + v9() + v11() + v12()
+	   + v13.arr[0] + v14.arr[0] + v15.arr[0]
+           - 8;
+}
+]])
+
+AT_DATA([broken.c],
+[[
+/* these symbols should not be exported */
+#ifdef __cplusplus
+extern "C" {
+#endif
+extern int w1 (void);
+#ifdef __cplusplus
+}
+#endif
+int main (void)
+{
+  return w1 ();
+}
+]])
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c],[0],[ignore],[ignore])
+AT_CHECK([$CC $CPPFLAGS -DLIBA_DLL_IMPORT $CFLAGS -c main.c],[0],[ignore],[ignore])
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c broken.c],[0],[ignore],[ignore])
+
+for exportsyms in '' '-export-symbols-regex "v.*"' '-export-symbols asyms'
+do
+  # case 1: shared library built from object.
+  LT_AT_CHECK([eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo \
+	       -rpath $libdir' $exportsyms], [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la],
+	   [], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([./main])
+  if test -n "$exportsyms" && $can_hide; then
+    AT_CHECK([if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o broken$EXEEXT broken.$OBJEXT liba.la
+	      then (exit 1); else :; fi], [], [ignore], [ignore])
+  fi
+
+  # case 2: shared library built from convenience archive.
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libconv.la a.lo],
+	   [], [ignore], [ignore])
+  LT_AT_CHECK([eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la libconv.la \
+	       -rpath $libdir' $exportsyms], [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la],
+	   [], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([./main])
+  if test -n "$exportsyms" && $can_hide; then
+    AT_CHECK([if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o broken$EXEEXT broken.$OBJEXT liba.la
+	      then (exit 1); else :; fi], [], [ignore], [ignore])
+  fi
+done
+
+AT_CHECK([$can_hide || (exit 77)])
+
+AT_CLEANUP
diff --git a/tests/f77demo-conf.test b/tests/f77demo-conf.test
new file mode 100755
index 0000000..feb3a85
--- /dev/null
+++ b/tests/f77demo-conf.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# f77demo-conf.test - try configuring the f77demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/f77demo"
+func_make_distclean
+func_configure
+func_check_static_shared "yes" "yes"
+
+exit 0
diff --git a/tests/f77demo-exec.test b/tests/f77demo-exec.test
new file mode 100755
index 0000000..40539fd
--- /dev/null
+++ b/tests/f77demo-exec.test
@@ -0,0 +1,35 @@
+#! /bin/sh
+# f77demo-exec.test - check that programs in the f77demo subdirectory are viable
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "f77demo-make" "tests/f77demo/fprogram$EXEEXT" "tests/f77demo/cprogram$EXEEXT"
+
+func_rmprefixdir
+func_exec_init "uninstalled"
+func_exec "tests/f77demo/fprogram$EXEEXT"
+func_exec "tests/f77demo/cprogram$EXEEXT"
+
+exit $exec_status
diff --git a/tests/f77demo-make.test b/tests/f77demo-make.test
new file mode 100755
index 0000000..19a153d
--- /dev/null
+++ b/tests/f77demo-make.test
@@ -0,0 +1,36 @@
+#! /bin/sh
+# f77demo-make.test - try building in the f77demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "f77demo-conf" "tests/f77demo/Makefile"
+
+func_rmprefixdir
+func_cd "tests/f77demo"
+# May fail make on some platforms, simply "skip" in that case
+#func_make
+eval $MAKE || func_skip "The improved fortran tests catch a known failure mode"
+
+exit 0
diff --git a/tests/f77demo-shared-exec.test b/tests/f77demo-shared-exec.test
new file mode 100755
index 0000000..b88eb16
--- /dev/null
+++ b/tests/f77demo-shared-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/f77demo-exec.test
diff --git a/tests/f77demo-shared-make.test b/tests/f77demo-shared-make.test
new file mode 100755
index 0000000..e68f6de
--- /dev/null
+++ b/tests/f77demo-shared-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/f77demo-make.test
diff --git a/tests/f77demo-shared.test b/tests/f77demo-shared.test
new file mode 100755
index 0000000..26cca0b
--- /dev/null
+++ b/tests/f77demo-shared.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# f77demo-shared.test - try configuring the f77demo subdirectory for shared libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/f77demo"
+func_make_distclean
+func_configure "--disable-static"
+func_check_static_shared "no" "yes"
+
+exit 0
diff --git a/tests/f77demo-static-exec.test b/tests/f77demo-static-exec.test
new file mode 100755
index 0000000..b88eb16
--- /dev/null
+++ b/tests/f77demo-static-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/f77demo-exec.test
diff --git a/tests/f77demo-static-make.test b/tests/f77demo-static-make.test
new file mode 100755
index 0000000..e68f6de
--- /dev/null
+++ b/tests/f77demo-static-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/f77demo-make.test
diff --git a/tests/f77demo-static.test b/tests/f77demo-static.test
new file mode 100755
index 0000000..395b63d
--- /dev/null
+++ b/tests/f77demo-static.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# f77demo-static.test - try configuring the f77demo subdirectory for static libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/f77demo"
+func_make_distclean
+func_configure "--disable-shared"
+func_check_static_shared "yes" "no"
+
+exit 0
diff --git a/tests/f77demo/Makefile.am b/tests/f77demo/Makefile.am
new file mode 100644
index 0000000..d38156e
--- /dev/null
+++ b/tests/f77demo/Makefile.am
@@ -0,0 +1,65 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS  = -I ../../libltdl/m4
+AM_CPPFLAGS	 = -I$(top_srcdir)/../..
+
+lib_LTLIBRARIES = libfoo.la libmix.la libfoo2.la libfoo3.la
+
+libfoo_la_SOURCES = foof.f
+libfoo_la_LDFLAGS = -no-undefined
+libfoo_la_LIBADD = libfoo2.la
+
+libfoo2_la_SOURCES = foof2.f
+libfoo2_la_LDFLAGS = -no-undefined
+
+libfoo3_la_SOURCES = foof3.f
+libfoo3_la_LDFLAGS = -no-undefined
+
+libmix_la_SOURCES = foof.f foof2.f fooc.c
+libmix_la_LDFLAGS = -no-undefined
+
+noinst_HEADERS = foo.h
+
+bin_PROGRAMS = fprogram cprogram
+
+fprogram_SOURCES = fprogram.f
+fprogram_LDADD = libfoo.la libfoo3.la
+
+cprogram_SOURCES = cprogram.c
+cprogram_LDADD = libmix.la $(FLIBS)
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
diff --git a/tests/f77demo/Makefile.in b/tests/f77demo/Makefile.in
new file mode 100644
index 0000000..a080ec0
--- /dev/null
+++ b/tests/f77demo/Makefile.in
@@ -0,0 +1,820 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = fprogram$(EXEEXT) cprogram$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \
+	$(srcdir)/../../libltdl/config/config.guess \
+	$(srcdir)/../../libltdl/config/config.sub \
+	$(srcdir)/../../libltdl/config/install-sh \
+	$(srcdir)/../../libltdl/config/ltmain.sh \
+	$(srcdir)/../../libltdl/config/missing $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/config-h.in \
+	$(top_srcdir)/configure ../../libltdl/config/compile \
+	../../libltdl/config/config.guess \
+	../../libltdl/config/config.sub ../../libltdl/config/depcomp \
+	../../libltdl/config/install-sh ../../libltdl/config/ltmain.sh \
+	../../libltdl/config/mdate-sh ../../libltdl/config/missing \
+	../../libltdl/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libfoo_la_DEPENDENCIES = libfoo2.la
+am_libfoo_la_OBJECTS = foof.lo
+libfoo_la_OBJECTS = $(am_libfoo_la_OBJECTS)
+libfoo_la_LINK = $(LIBTOOL) --tag=F77 $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(F77LD) $(AM_FFLAGS) $(FFLAGS) \
+	$(libfoo_la_LDFLAGS) $(LDFLAGS) -o $@
+libfoo2_la_LIBADD =
+am_libfoo2_la_OBJECTS = foof2.lo
+libfoo2_la_OBJECTS = $(am_libfoo2_la_OBJECTS)
+libfoo2_la_LINK = $(LIBTOOL) --tag=F77 $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(F77LD) $(AM_FFLAGS) $(FFLAGS) \
+	$(libfoo2_la_LDFLAGS) $(LDFLAGS) -o $@
+libfoo3_la_LIBADD =
+am_libfoo3_la_OBJECTS = foof3.lo
+libfoo3_la_OBJECTS = $(am_libfoo3_la_OBJECTS)
+libfoo3_la_LINK = $(LIBTOOL) --tag=F77 $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(F77LD) $(AM_FFLAGS) $(FFLAGS) \
+	$(libfoo3_la_LDFLAGS) $(LDFLAGS) -o $@
+libmix_la_LIBADD =
+am_libmix_la_OBJECTS = foof.lo foof2.lo fooc.lo
+libmix_la_OBJECTS = $(am_libmix_la_OBJECTS)
+libmix_la_LINK = $(LIBTOOL) --tag=F77 $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(F77LD) $(AM_FFLAGS) $(FFLAGS) \
+	$(libmix_la_LDFLAGS) $(LDFLAGS) -o $@
+PROGRAMS = $(bin_PROGRAMS)
+am_cprogram_OBJECTS = cprogram.$(OBJEXT)
+cprogram_OBJECTS = $(am_cprogram_OBJECTS)
+am__DEPENDENCIES_1 =
+cprogram_DEPENDENCIES = libmix.la $(am__DEPENDENCIES_1)
+am_fprogram_OBJECTS = fprogram.$(OBJEXT)
+fprogram_OBJECTS = $(am_fprogram_OBJECTS)
+fprogram_DEPENDENCIES = libfoo.la libfoo3.la
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+F77COMPILE = $(F77) $(AM_FFLAGS) $(FFLAGS)
+LTF77COMPILE = $(LIBTOOL) --tag=F77 $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(F77) $(AM_FFLAGS) $(FFLAGS)
+F77LD = $(F77)
+F77LINK = $(LIBTOOL) --tag=F77 $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(F77LD) $(AM_FFLAGS) $(FFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libfoo_la_SOURCES) $(libfoo2_la_SOURCES) \
+	$(libfoo3_la_SOURCES) $(libmix_la_SOURCES) $(cprogram_SOURCES) \
+	$(fprogram_SOURCES)
+DIST_SOURCES = $(libfoo_la_SOURCES) $(libfoo2_la_SOURCES) \
+	$(libfoo3_la_SOURCES) $(libmix_la_SOURCES) $(cprogram_SOURCES) \
+	$(fprogram_SOURCES)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+FGREP = @FGREP@
+FLIBS = @FLIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS = -I ../../libltdl/m4
+AM_CPPFLAGS = -I$(top_srcdir)/../..
+lib_LTLIBRARIES = libfoo.la libmix.la libfoo2.la libfoo3.la
+libfoo_la_SOURCES = foof.f
+libfoo_la_LDFLAGS = -no-undefined
+libfoo_la_LIBADD = libfoo2.la
+libfoo2_la_SOURCES = foof2.f
+libfoo2_la_LDFLAGS = -no-undefined
+libfoo3_la_SOURCES = foof3.f
+libfoo3_la_LDFLAGS = -no-undefined
+libmix_la_SOURCES = foof.f foof2.f fooc.c
+libmix_la_LDFLAGS = -no-undefined
+noinst_HEADERS = foo.h
+fprogram_SOURCES = fprogram.f
+fprogram_LDADD = libfoo.la libfoo3.la
+cprogram_SOURCES = cprogram.c
+cprogram_LDADD = libmix.la $(FLIBS)
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .f .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config-h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config-h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libfoo.la: $(libfoo_la_OBJECTS) $(libfoo_la_DEPENDENCIES) 
+	$(libfoo_la_LINK) -rpath $(libdir) $(libfoo_la_OBJECTS) $(libfoo_la_LIBADD) $(LIBS)
+libfoo2.la: $(libfoo2_la_OBJECTS) $(libfoo2_la_DEPENDENCIES) 
+	$(libfoo2_la_LINK) -rpath $(libdir) $(libfoo2_la_OBJECTS) $(libfoo2_la_LIBADD) $(LIBS)
+libfoo3.la: $(libfoo3_la_OBJECTS) $(libfoo3_la_DEPENDENCIES) 
+	$(libfoo3_la_LINK) -rpath $(libdir) $(libfoo3_la_OBJECTS) $(libfoo3_la_LIBADD) $(LIBS)
+libmix.la: $(libmix_la_OBJECTS) $(libmix_la_DEPENDENCIES) 
+	$(libmix_la_LINK) -rpath $(libdir) $(libmix_la_OBJECTS) $(libmix_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+cprogram$(EXEEXT): $(cprogram_OBJECTS) $(cprogram_DEPENDENCIES) 
+	@rm -f cprogram$(EXEEXT)
+	$(LINK) $(cprogram_OBJECTS) $(cprogram_LDADD) $(LIBS)
+fprogram$(EXEEXT): $(fprogram_OBJECTS) $(fprogram_DEPENDENCIES) 
+	@rm -f fprogram$(EXEEXT)
+	$(F77LINK) $(fprogram_OBJECTS) $(fprogram_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+.f.o:
+	$(F77COMPILE) -c -o $@ $<
+
+.f.obj:
+	$(F77COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.f.lo:
+	$(LTF77COMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES) config-h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config-h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) config-h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS) config-h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS) config.h
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-libLTLIBRARIES
+
+.MAKE: all install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
+	dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-local distclean-tags \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-libLTLIBRARIES \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-binPROGRAMS uninstall-libLTLIBRARIES
+
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/f77demo/README b/tests/f77demo/README
new file mode 100644
index 0000000..11df06c
--- /dev/null
+++ b/tests/f77demo/README
@@ -0,0 +1,16 @@
+This is a short demo of the fortran support in libtool.
+
+fprogram is a pure-fortran program which is linked 
+against the fortran-only library libfoo.la
+
+cprogram is a C program, which is linked against the
+mixed C and fortran library libmix.la. The program
+calls a C function, which in turn calls a fortran 
+function.
+
+This demo requires GNU autoconf, automake, 
+libtool with the F77 tag and quite obvious Fortran 77.
+
+
+
+
diff --git a/tests/f77demo/aclocal.m4 b/tests/f77demo/aclocal.m4
new file mode 100644
index 0000000..d479ce3
--- /dev/null
+++ b/tests/f77demo/aclocal.m4
@@ -0,0 +1,956 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../libltdl/m4/libtool.m4])
+m4_include([../../libltdl/m4/ltoptions.m4])
+m4_include([../../libltdl/m4/ltsugar.m4])
+m4_include([../../libltdl/m4/ltversion.m4])
+m4_include([../../libltdl/m4/lt~obsolete.m4])
diff --git a/tests/f77demo/config-h.in b/tests/f77demo/config-h.in
new file mode 100644
index 0000000..40b8124
--- /dev/null
+++ b/tests/f77demo/config-h.in
@@ -0,0 +1,76 @@
+/* config-h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to dummy `main' function (if any) required to link to the Fortran
+   libraries. */
+#undef F77_DUMMY_MAIN
+
+/* Define to a macro mangling the given C identifier (in lower and upper
+   case), which must not contain underscores, for linking with Fortran. */
+#undef F77_FUNC
+
+/* As F77_FUNC, but for C identifiers containing underscores. */
+#undef F77_FUNC_
+
+/* Define if F77 and FC dummy `main' functions are identical. */
+#undef FC_DUMMY_MAIN_EQ_F77
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
diff --git a/tests/f77demo/configure b/tests/f77demo/configure
new file mode 100755
index 0000000..0c9a995
--- /dev/null
+++ b/tests/f77demo/configure
@@ -0,0 +1,17544 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for f77demo 1.0.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='f77demo'
+PACKAGE_TARNAME='f77demo'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='f77demo 1.0'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="foof.f"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+LIBTOOL_DEPS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+FLIBS
+ac_ct_F77
+FFLAGS
+F77
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+with_dist
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+F77
+FFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures f77demo 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/f77demo]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of f77demo 1.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-dist             ignore errors not affecting `make dist'
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  F77         Fortran 77 compiler command
+  FFLAGS      Fortran 77 compiler flags
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+f77demo configure 1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_f77_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_f77_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_f77_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_f77_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_f77_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_f77_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_f77_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_f77_try_link
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by f77demo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_config_headers="$ac_config_headers config.h:config-h.in"
+
+
+ac_aux_dir=
+for ac_dir in ../../libltdl/config "$srcdir"/../../libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../libltdl/config \"$srcdir\"/../../libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+# Check whether --with-dist was given.
+if test "${with_dist+set}" = set; then :
+  withval=$with_dist;
+fi
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='f77demo'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+## ------------------------ ##
+## Fortran compiler checks. ##
+## ------------------------ ##
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$F77"; then
+  ac_cv_prog_F77="$F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+F77=$ac_cv_prog_F77
+if test -n "$F77"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $F77" >&5
+$as_echo "$F77" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$F77" && break
+  done
+fi
+if test -z "$F77"; then
+  ac_ct_F77=$F77
+  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_F77"; then
+  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_F77="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_F77=$ac_cv_prog_ac_ct_F77
+if test -n "$ac_ct_F77"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_F77" >&5
+$as_echo "$ac_ct_F77" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_F77" && break
+done
+
+  if test "x$ac_ct_F77" = x; then
+    F77=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    F77=$ac_ct_F77
+  fi
+fi
+
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran 77 compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file.  (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran 77 compiler" >&5
+$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; }
+if ${ac_cv_f77_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+#ifndef __GNUC__
+       choke me
+#endif
+
+      end
+_ACEOF
+if ac_fn_f77_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_f77_compiler_gnu" >&5
+$as_echo "$ac_cv_f77_compiler_gnu" >&6; }
+ac_ext=$ac_save_ext
+ac_test_FFLAGS=${FFLAGS+set}
+ac_save_FFLAGS=$FFLAGS
+FFLAGS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $F77 accepts -g" >&5
+$as_echo_n "checking whether $F77 accepts -g... " >&6; }
+if ${ac_cv_prog_f77_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  FFLAGS=-g
+cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_f77_try_compile "$LINENO"; then :
+  ac_cv_prog_f77_g=yes
+else
+  ac_cv_prog_f77_g=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_f77_g" >&5
+$as_echo "$ac_cv_prog_f77_g" >&6; }
+if test "$ac_test_FFLAGS" = set; then
+  FFLAGS=$ac_save_FFLAGS
+elif test $ac_cv_prog_f77_g = yes; then
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-g -O2"
+  else
+    FFLAGS="-g"
+  fi
+else
+  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+    FFLAGS="-O2"
+  else
+    FFLAGS=
+  fi
+fi
+
+if test $ac_compiler_gnu = yes; then
+  G77=yes
+else
+  G77=
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+if test -z "$with_dist"; then
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to get verbose linking output from $F77" >&5
+$as_echo_n "checking how to get verbose linking output from $F77... " >&6; }
+if ${ac_cv_prog_f77_v+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_f77_try_compile "$LINENO"; then :
+  ac_cv_prog_f77_v=
+# Try some options frequently used verbose output
+for ac_verb in -v -verbose --verbose -V -\#\#\#; do
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+
+# Compile and link our simple test program by passing a flag (argument
+# 1 to this macro) to the Fortran compiler in order to get
+# "verbose" output that we can then parse for the Fortran linker
+# flags.
+ac_save_FFLAGS=$FFLAGS
+FFLAGS="$FFLAGS $ac_verb"
+eval "set x $ac_link"
+shift
+$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5
+# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH,
+# LIBRARY_PATH; skip all such settings.
+ac_f77_v_output=`eval $ac_link 5>&1 2>&1 |
+  sed '/^Driving:/d; /^Configured with:/d;
+      '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"`
+$as_echo "$ac_f77_v_output" >&5
+FFLAGS=$ac_save_FFLAGS
+
+rm -rf conftest*
+
+# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where
+# /foo, /bar, and /baz are search directories for the Fortran linker.
+# Here, we change these into -L/foo -L/bar -L/baz (and put it first):
+ac_f77_v_output="`echo $ac_f77_v_output |
+	grep 'LPATH is:' |
+	sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_f77_v_output"
+
+# FIXME: we keep getting bitten by quoted arguments; a more general fix
+#        that detects unbalanced quotes in FLIBS should be implemented
+#        and (ugh) tested at some point.
+case $ac_f77_v_output in
+  # If we are using xlf then replace all the commas with spaces.
+  *xlfentry*)
+    ac_f77_v_output=`echo $ac_f77_v_output | sed 's/,/ /g'` ;;
+
+  # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted
+  # $LIBS confuse us, and the libraries appear later in the output anyway).
+  *mGLOB_options_string*)
+    ac_f77_v_output=`echo $ac_f77_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;;
+
+  # Portland Group compiler has singly- or doubly-quoted -cmdline argument
+  # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4.
+  # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2".
+  *-cmdline\ * | *-ignore\ * | *-def\ *)
+    ac_f77_v_output=`echo $ac_f77_v_output | sed "\
+	s/-cmdline  *'[^']*'/ /g; s/-cmdline  *\"[^\"]*\"/ /g
+	s/-ignore  *'[^']*'/ /g; s/-ignore  *\"[^\"]*\"/ /g
+	s/-def  *'[^']*'/ /g; s/-def  *\"[^\"]*\"/ /g"` ;;
+
+  # If we are using Cray Fortran then delete quotes.
+  *cft90*)
+    ac_f77_v_output=`echo $ac_f77_v_output | sed 's/"//g'` ;;
+esac
+
+
+  # look for -l* and *.a constructs in the output
+  for ac_arg in $ac_f77_v_output; do
+     case $ac_arg in
+	[\\/]*.a | ?:[\\/]*.a | -[lLRu]*)
+	  ac_cv_prog_f77_v=$ac_verb
+	  break 2 ;;
+     esac
+  done
+done
+if test -z "$ac_cv_prog_f77_v"; then
+   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot determine how to obtain linking information from $F77" >&5
+$as_echo "$as_me: WARNING: cannot determine how to obtain linking information from $F77" >&2;}
+fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: compilation failed" >&5
+$as_echo "$as_me: WARNING: compilation failed" >&2;}
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_f77_v" >&5
+$as_echo "$ac_cv_prog_f77_v" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran 77 libraries of $F77" >&5
+$as_echo_n "checking for Fortran 77 libraries of $F77... " >&6; }
+if ${ac_cv_f77_libs+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$FLIBS" != "x"; then
+  ac_cv_f77_libs="$FLIBS" # Let the user override the test.
+else
+
+cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+
+# Compile and link our simple test program by passing a flag (argument
+# 1 to this macro) to the Fortran compiler in order to get
+# "verbose" output that we can then parse for the Fortran linker
+# flags.
+ac_save_FFLAGS=$FFLAGS
+FFLAGS="$FFLAGS $ac_cv_prog_f77_v"
+eval "set x $ac_link"
+shift
+$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5
+# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH,
+# LIBRARY_PATH; skip all such settings.
+ac_f77_v_output=`eval $ac_link 5>&1 2>&1 |
+  sed '/^Driving:/d; /^Configured with:/d;
+      '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"`
+$as_echo "$ac_f77_v_output" >&5
+FFLAGS=$ac_save_FFLAGS
+
+rm -rf conftest*
+
+# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where
+# /foo, /bar, and /baz are search directories for the Fortran linker.
+# Here, we change these into -L/foo -L/bar -L/baz (and put it first):
+ac_f77_v_output="`echo $ac_f77_v_output |
+	grep 'LPATH is:' |
+	sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_f77_v_output"
+
+# FIXME: we keep getting bitten by quoted arguments; a more general fix
+#        that detects unbalanced quotes in FLIBS should be implemented
+#        and (ugh) tested at some point.
+case $ac_f77_v_output in
+  # If we are using xlf then replace all the commas with spaces.
+  *xlfentry*)
+    ac_f77_v_output=`echo $ac_f77_v_output | sed 's/,/ /g'` ;;
+
+  # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted
+  # $LIBS confuse us, and the libraries appear later in the output anyway).
+  *mGLOB_options_string*)
+    ac_f77_v_output=`echo $ac_f77_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;;
+
+  # Portland Group compiler has singly- or doubly-quoted -cmdline argument
+  # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4.
+  # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2".
+  *-cmdline\ * | *-ignore\ * | *-def\ *)
+    ac_f77_v_output=`echo $ac_f77_v_output | sed "\
+	s/-cmdline  *'[^']*'/ /g; s/-cmdline  *\"[^\"]*\"/ /g
+	s/-ignore  *'[^']*'/ /g; s/-ignore  *\"[^\"]*\"/ /g
+	s/-def  *'[^']*'/ /g; s/-def  *\"[^\"]*\"/ /g"` ;;
+
+  # If we are using Cray Fortran then delete quotes.
+  *cft90*)
+    ac_f77_v_output=`echo $ac_f77_v_output | sed 's/"//g'` ;;
+esac
+
+
+
+ac_cv_f77_libs=
+
+# Save positional arguments (if any)
+ac_save_positional="$@"
+
+set X $ac_f77_v_output
+while test $# != 1; do
+  shift
+  ac_arg=$1
+  case $ac_arg in
+	[\\/]*.a | ?:[\\/]*.a)
+	    ac_exists=false
+  for ac_i in $ac_cv_f77_libs; do
+    if test x"$ac_arg" = x"$ac_i"; then
+      ac_exists=true
+      break
+    fi
+  done
+
+  if test x"$ac_exists" = xtrue; then :
+
+else
+  ac_cv_f77_libs="$ac_cv_f77_libs $ac_arg"
+fi
+	  ;;
+	-bI:*)
+	    ac_exists=false
+  for ac_i in $ac_cv_f77_libs; do
+    if test x"$ac_arg" = x"$ac_i"; then
+      ac_exists=true
+      break
+    fi
+  done
+
+  if test x"$ac_exists" = xtrue; then :
+
+else
+  if test "$ac_compiler_gnu" = yes; then
+  for ac_link_opt in $ac_arg; do
+    ac_cv_f77_libs="$ac_cv_f77_libs -Xlinker $ac_link_opt"
+  done
+else
+  ac_cv_f77_libs="$ac_cv_f77_libs $ac_arg"
+fi
+fi
+	  ;;
+	  # Ignore these flags.
+	-lang* | -lcrt*.o | -lc | -lgcc* | -lSystem | -libmil | -little \
+	  |-LANG:=* | -LIST:* | -LNO:* | -link)
+	  ;;
+	-lkernel32)
+	  test x"$CYGWIN" != xyes && ac_cv_f77_libs="$ac_cv_f77_libs $ac_arg"
+	  ;;
+	-[LRuYz])
+	  # These flags, when seen by themselves, take an argument.
+	  # We remove the space between option and argument and re-iterate
+	  # unless we find an empty arg or a new option (starting with -)
+	  case $2 in
+	     "" | -*);;
+	     *)
+		ac_arg="$ac_arg$2"
+		shift; shift
+		set X $ac_arg "$@"
+		;;
+	  esac
+	  ;;
+	-YP,*)
+	  for ac_j in `$as_echo "$ac_arg" | sed -e 's/-YP,/-L/;s/:/ -L/g'`; do
+	      ac_exists=false
+  for ac_i in $ac_cv_f77_libs; do
+    if test x"$ac_j" = x"$ac_i"; then
+      ac_exists=true
+      break
+    fi
+  done
+
+  if test x"$ac_exists" = xtrue; then :
+
+else
+  ac_arg="$ac_arg $ac_j"
+			       ac_cv_f77_libs="$ac_cv_f77_libs $ac_j"
+fi
+	  done
+	  ;;
+	-[lLR]*)
+	    ac_exists=false
+  for ac_i in $ac_cv_f77_libs; do
+    if test x"$ac_arg" = x"$ac_i"; then
+      ac_exists=true
+      break
+    fi
+  done
+
+  if test x"$ac_exists" = xtrue; then :
+
+else
+  ac_cv_f77_libs="$ac_cv_f77_libs $ac_arg"
+fi
+	  ;;
+	-zallextract*| -zdefaultextract)
+	  ac_cv_f77_libs="$ac_cv_f77_libs $ac_arg"
+	  ;;
+	  # Ignore everything else.
+  esac
+done
+# restore positional arguments
+set X $ac_save_positional; shift
+
+# We only consider "LD_RUN_PATH" on Solaris systems.  If this is seen,
+# then we insist that the "run path" must be an absolute path (i.e. it
+# must begin with a "/").
+case `(uname -sr) 2>/dev/null` in
+   "SunOS 5"*)
+      ac_ld_run_path=`$as_echo "$ac_f77_v_output" |
+			sed -n 's,^.*LD_RUN_PATH *= *\(/[^ ]*\).*$,-R\1,p'`
+      test "x$ac_ld_run_path" != x &&
+	if test "$ac_compiler_gnu" = yes; then
+  for ac_link_opt in $ac_ld_run_path; do
+    ac_cv_f77_libs="$ac_cv_f77_libs -Xlinker $ac_link_opt"
+  done
+else
+  ac_cv_f77_libs="$ac_cv_f77_libs $ac_ld_run_path"
+fi
+      ;;
+esac
+fi # test "x$[]_AC_LANG_PREFIX[]LIBS" = "x"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_f77_libs" >&5
+$as_echo "$ac_cv_f77_libs" >&6; }
+FLIBS="$ac_cv_f77_libs"
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dummy main to link with Fortran 77 libraries" >&5
+$as_echo_n "checking for dummy main to link with Fortran 77 libraries... " >&6; }
+if ${ac_cv_f77_dummy_main+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_f77_dm_save_LIBS=$LIBS
+ LIBS="$LIBS $FLIBS"
+ ac_fortran_dm_var=F77_DUMMY_MAIN
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ # First, try linking without a dummy main:
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_fortran_dummy_main=none
+else
+  ac_cv_fortran_dummy_main=unknown
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+ if test $ac_cv_fortran_dummy_main = unknown; then
+   for ac_func in MAIN__ MAIN_ __main MAIN _MAIN __MAIN main_ main__ _main; do
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define $ac_fortran_dm_var $ac_func
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_fortran_dummy_main=$ac_func; break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+   done
+ fi
+ ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+ ac_cv_f77_dummy_main=$ac_cv_fortran_dummy_main
+ rm -rf conftest*
+ LIBS=$ac_f77_dm_save_LIBS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_f77_dummy_main" >&5
+$as_echo "$ac_cv_f77_dummy_main" >&6; }
+F77_DUMMY_MAIN=$ac_cv_f77_dummy_main
+if test "$F77_DUMMY_MAIN" != unknown; then :
+  if test $F77_DUMMY_MAIN != none; then
+
+cat >>confdefs.h <<_ACEOF
+#define F77_DUMMY_MAIN $F77_DUMMY_MAIN
+_ACEOF
+
+  if test "x$ac_cv_fc_dummy_main" = "x$ac_cv_f77_dummy_main"; then
+
+$as_echo "#define FC_DUMMY_MAIN_EQ_F77 1" >>confdefs.h
+
+  fi
+fi
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "linking to Fortran libraries from C fails
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran 77 name-mangling scheme" >&5
+$as_echo_n "checking for Fortran 77 name-mangling scheme... " >&6; }
+if ${ac_cv_f77_mangling+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      subroutine foobar()
+      return
+      end
+      subroutine foo_bar()
+      return
+      end
+_ACEOF
+if ac_fn_f77_try_compile "$LINENO"; then :
+  mv conftest.$ac_objext cfortran_test.$ac_objext
+
+  ac_save_LIBS=$LIBS
+  LIBS="cfortran_test.$ac_objext $LIBS $FLIBS"
+
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+  ac_success=no
+  for ac_foobar in foobar FOOBAR; do
+    for ac_underscore in "" "_"; do
+      ac_func="$ac_foobar$ac_underscore"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $ac_func ();
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+return $ac_func ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_success=yes; break 2
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    done
+  done
+  ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+  if test "$ac_success" = "yes"; then
+     case $ac_foobar in
+	foobar)
+	   ac_case=lower
+	   ac_foo_bar=foo_bar
+	   ;;
+	FOOBAR)
+	   ac_case=upper
+	   ac_foo_bar=FOO_BAR
+	   ;;
+     esac
+
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+     ac_success_extra=no
+     for ac_extra in "" "_"; do
+	ac_func="$ac_foo_bar$ac_underscore$ac_extra"
+	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $ac_func ();
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+return $ac_func ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_success_extra=yes; break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     done
+     ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+     if test "$ac_success_extra" = "yes"; then
+	ac_cv_f77_mangling="$ac_case case"
+	if test -z "$ac_underscore"; then
+	   ac_cv_f77_mangling="$ac_cv_f77_mangling, no underscore"
+	else
+	   ac_cv_f77_mangling="$ac_cv_f77_mangling, underscore"
+	fi
+	if test -z "$ac_extra"; then
+	   ac_cv_f77_mangling="$ac_cv_f77_mangling, no extra underscore"
+	else
+	   ac_cv_f77_mangling="$ac_cv_f77_mangling, extra underscore"
+	fi
+      else
+	ac_cv_f77_mangling="unknown"
+      fi
+  else
+     ac_cv_f77_mangling="unknown"
+  fi
+
+  LIBS=$ac_save_LIBS
+  rm -rf conftest*
+  rm -f cfortran_test*
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compile a simple Fortran program
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_f77_mangling" >&5
+$as_echo "$ac_cv_f77_mangling" >&6; }
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+case $ac_cv_f77_mangling in
+  "lower case, no underscore, no extra underscore")
+	  $as_echo "#define F77_FUNC(name,NAME) name" >>confdefs.h
+
+	  $as_echo "#define F77_FUNC_(name,NAME) name" >>confdefs.h
+ ;;
+  "lower case, no underscore, extra underscore")
+	  $as_echo "#define F77_FUNC(name,NAME) name" >>confdefs.h
+
+	  $as_echo "#define F77_FUNC_(name,NAME) name ## _" >>confdefs.h
+ ;;
+  "lower case, underscore, no extra underscore")
+	  $as_echo "#define F77_FUNC(name,NAME) name ## _" >>confdefs.h
+
+	  $as_echo "#define F77_FUNC_(name,NAME) name ## _" >>confdefs.h
+ ;;
+  "lower case, underscore, extra underscore")
+	  $as_echo "#define F77_FUNC(name,NAME) name ## _" >>confdefs.h
+
+	  $as_echo "#define F77_FUNC_(name,NAME) name ## __" >>confdefs.h
+ ;;
+  "upper case, no underscore, no extra underscore")
+	  $as_echo "#define F77_FUNC(name,NAME) NAME" >>confdefs.h
+
+	  $as_echo "#define F77_FUNC_(name,NAME) NAME" >>confdefs.h
+ ;;
+  "upper case, no underscore, extra underscore")
+	  $as_echo "#define F77_FUNC(name,NAME) NAME" >>confdefs.h
+
+	  $as_echo "#define F77_FUNC_(name,NAME) NAME ## _" >>confdefs.h
+ ;;
+  "upper case, underscore, no extra underscore")
+	  $as_echo "#define F77_FUNC(name,NAME) NAME ## _" >>confdefs.h
+
+	  $as_echo "#define F77_FUNC_(name,NAME) NAME ## _" >>confdefs.h
+ ;;
+  "upper case, underscore, extra underscore")
+	  $as_echo "#define F77_FUNC(name,NAME) NAME ## _" >>confdefs.h
+
+	  $as_echo "#define F77_FUNC_(name,NAME) NAME ## __" >>confdefs.h
+ ;;
+  *)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unknown Fortran name-mangling scheme" >&5
+$as_echo "$as_me: WARNING: unknown Fortran name-mangling scheme" >&2;}
+	  ;;
+esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+
+
+
+        enable_dlopen=no
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+#ifdef F77_DUMMY_MAIN
+
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int F77_DUMMY_MAIN() { return 1; }
+
+#endif
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+      ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+
+archive_cmds_need_lc_F77=no
+allow_undefined_flag_F77=
+always_export_symbols_F77=no
+archive_expsym_cmds_F77=
+export_dynamic_flag_spec_F77=
+hardcode_direct_F77=no
+hardcode_direct_absolute_F77=no
+hardcode_libdir_flag_spec_F77=
+hardcode_libdir_separator_F77=
+hardcode_minus_L_F77=no
+hardcode_automatic_F77=no
+inherit_rpath_F77=no
+module_cmds_F77=
+module_expsym_cmds_F77=
+link_all_deplibs_F77=unknown
+old_archive_cmds_F77=$old_archive_cmds
+reload_flag_F77=$reload_flag
+reload_cmds_F77=$reload_cmds
+no_undefined_flag_F77=
+whole_archive_flag_spec_F77=
+enable_shared_with_static_runtimes_F77=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+objext_F77=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${F77-"f77"}
+  CFLAGS=$FFLAGS
+  compiler=$CC
+  compiler_F77=$CC
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+  GCC=$G77
+  if test -n "$compiler"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[4-9]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+    GCC_F77="$G77"
+    LD_F77="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    lt_prog_compiler_wl_F77=
+lt_prog_compiler_pic_F77=
+lt_prog_compiler_static_F77=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_F77='-Wl,'
+    lt_prog_compiler_static_F77='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_F77='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_F77='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_F77=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_F77=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_F77='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_F77=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic_F77='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl_F77='-Xlinker '
+      if test -n "$lt_prog_compiler_pic_F77"; then
+        lt_prog_compiler_pic_F77="-Xcompiler $lt_prog_compiler_pic_F77"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_F77='-Bstatic'
+      else
+	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_F77='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-KPIC'
+	lt_prog_compiler_static_F77='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fPIC'
+	lt_prog_compiler_static_F77='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='--shared'
+	lt_prog_compiler_static_F77='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl_F77='-Wl,-Wl,,'
+	lt_prog_compiler_pic_F77='-PIC'
+	lt_prog_compiler_static_F77='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-fpic'
+	lt_prog_compiler_static_F77='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_F77='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_F77='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl_F77='-Wl,'
+	lt_prog_compiler_pic_F77='-qpic'
+	lt_prog_compiler_static_F77='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_F77='-KPIC'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  lt_prog_compiler_wl_F77='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl_F77='-Wl,'
+	  lt_prog_compiler_pic_F77='-fPIC'
+	  lt_prog_compiler_static_F77='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl_F77='-Wl,'
+	  lt_prog_compiler_pic_F77='-fpic'
+	  lt_prog_compiler_static_F77='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_F77='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static_F77='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl_F77='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_F77='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_F77='-Qoption ld '
+      lt_prog_compiler_pic_F77='-PIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_F77='-Kconform_pic'
+	lt_prog_compiler_static_F77='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_pic_F77='-KPIC'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_F77='-Wl,'
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_F77='-pic'
+      lt_prog_compiler_static_F77='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_F77=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_F77=
+    ;;
+  *)
+    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_F77=$lt_prog_compiler_pic_F77
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_F77" >&5
+$as_echo "$lt_cv_prog_compiler_pic_F77" >&6; }
+lt_prog_compiler_pic_F77=$lt_cv_prog_compiler_pic_F77
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_F77"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_F77=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_F77"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_F77=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_F77" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
+    case $lt_prog_compiler_pic_F77 in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
+     esac
+else
+    lt_prog_compiler_pic_F77=
+     lt_prog_compiler_can_build_shared_F77=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_F77=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_F77=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_F77=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_F77" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
+    :
+else
+    lt_prog_compiler_static_F77=
+fi
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_F77=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_F77=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_F77" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_F77=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_F77=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_F77" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag_F77=
+  always_export_symbols_F77=no
+  archive_cmds_F77=
+  archive_expsym_cmds_F77=
+  compiler_needs_object_F77=no
+  enable_shared_with_static_runtimes_F77=no
+  export_dynamic_flag_spec_F77=
+  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic_F77=no
+  hardcode_direct_F77=no
+  hardcode_direct_absolute_F77=no
+  hardcode_libdir_flag_spec_F77=
+  hardcode_libdir_separator_F77=
+  hardcode_minus_L_F77=no
+  hardcode_shlibpath_var_F77=unsupported
+  inherit_rpath_F77=no
+  link_all_deplibs_F77=unknown
+  module_cmds_F77=
+  module_expsym_cmds_F77=
+  old_archive_from_new_cmds_F77=
+  old_archive_from_expsyms_cmds_F77=
+  thread_safe_flag_spec_F77=
+  whole_archive_flag_spec_F77=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_F77=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_F77=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_F77=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_F77=''
+        ;;
+      m68k)
+            archive_cmds_F77='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_F77='-L$libdir'
+            hardcode_minus_L_F77=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_F77=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      export_dynamic_flag_spec_F77='${wl}--export-all-symbols'
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=no
+      enable_shared_with_static_runtimes_F77=yes
+      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_F77='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs_F77=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_F77='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec_F77=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_F77=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_F77=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds_F77='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec_F77='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+	  archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds_F77='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs_F77=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_F77=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs_F77=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_F77" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_F77=
+      export_dynamic_flag_spec_F77=
+      whole_archive_flag_spec_F77=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_F77=unsupported
+      always_export_symbols_F77=yes
+      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_F77=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_F77=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_F77=''
+      hardcode_direct_F77=yes
+      hardcode_direct_absolute_F77=yes
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+      file_list_spec_F77='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct_F77=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L_F77=yes
+	  hardcode_libdir_flag_spec_F77='-L$libdir'
+	  hardcode_libdir_separator_F77=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec_F77='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_F77=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_F77='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__F77=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__F77"; then
+    lt_cv_aix_libpath__F77=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__F77"; then
+    lt_cv_aix_libpath__F77="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__F77
+fi
+
+        hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds_F77='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_F77="-z nodefs"
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__F77=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__F77"; then
+    lt_cv_aix_libpath__F77=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__F77"; then
+    lt_cv_aix_libpath__F77="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__F77
+fi
+
+	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_F77=' ${wl}-bernotok'
+	  allow_undefined_flag_F77=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec_F77='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec_F77='$convenience'
+	  fi
+	  archive_cmds_need_lc_F77=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_F77=''
+        ;;
+      m68k)
+            archive_cmds_F77='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_F77='-L$libdir'
+            hardcode_minus_L_F77=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_F77=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec_F77=' '
+	allow_undefined_flag_F77=unsupported
+	always_export_symbols_F77=yes
+	file_list_spec_F77='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_F77='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, F77)='true'
+	enable_shared_with_static_runtimes_F77=yes
+	exclude_expsyms_F77='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds_F77='chmod 644 $oldlib'
+	postlink_cmds_F77='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec_F77=' '
+	allow_undefined_flag_F77=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds_F77='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes_F77=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_F77=no
+  hardcode_direct_F77=no
+  hardcode_automatic_F77=yes
+  hardcode_shlibpath_var_F77=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec_F77='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    compiler_needs_object_F77=yes
+  else
+    whole_archive_flag_spec_F77=''
+  fi
+  link_all_deplibs_F77=yes
+  allow_undefined_flag_F77="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs_F77=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_F77='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_direct_F77=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds_F77='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+	hardcode_direct_F77=yes
+	hardcode_direct_absolute_F77=yes
+	export_dynamic_flag_spec_F77='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_F77=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_F77='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_F77=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct_F77=no
+	  hardcode_shlibpath_var_F77=no
+	  ;;
+	*)
+	  hardcode_direct_F77=yes
+	  hardcode_direct_absolute_F77=yes
+	  export_dynamic_flag_spec_F77='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_F77=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat > conftest.$ac_ext <<_ACEOF
+
+      subroutine foo
+      end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc_F77='no'
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      inherit_rpath_F77=yes
+      link_all_deplibs_F77=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_direct_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    newsos6)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_F77=yes
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_F77=yes
+	hardcode_shlibpath_var_F77=no
+	hardcode_direct_absolute_F77=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_F77='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_F77='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs_F77=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_minus_L_F77=yes
+      allow_undefined_flag_F77=unsupported
+      archive_cmds_F77='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc_F77='no'
+      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_F77=' -expect_unresolved \*'
+	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_F77='-rpath $libdir'
+      fi
+      archive_cmds_need_lc_F77='no'
+      hardcode_libdir_separator_F77=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_F77=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_F77='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds_F77='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds_F77='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_F77='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec_F77='-R$libdir'
+      hardcode_shlibpath_var_F77=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs_F77=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_direct_F77=yes
+      hardcode_minus_L_F77=yes
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_F77='$CC -r -o $output$reload_objs'
+	  hardcode_direct_F77=no
+        ;;
+	motorola)
+	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_F77=no
+      export_dynamic_flag_spec_F77='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_F77=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_F77=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_F77='${wl}-z,text'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_F77='${wl}-z,text'
+      allow_undefined_flag_F77='${wl}-z,nodefs'
+      archive_cmds_need_lc_F77=no
+      hardcode_shlibpath_var_F77=no
+      hardcode_libdir_flag_spec_F77='${wl}-R,$libdir'
+      hardcode_libdir_separator_F77=':'
+      link_all_deplibs_F77=yes
+      export_dynamic_flag_spec_F77='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_F77='-L$libdir'
+      hardcode_shlibpath_var_F77=no
+      ;;
+
+    *)
+      ld_shlibs_F77=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec_F77='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_F77" >&5
+$as_echo "$ld_shlibs_F77" >&6; }
+test "$ld_shlibs_F77" = no && can_build_shared=no
+
+with_gnu_ld_F77=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_F77" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_F77=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_F77 in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_F77+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_F77
+	  pic_flag=$lt_prog_compiler_pic_F77
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_F77
+	  allow_undefined_flag_F77=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_F77 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_F77 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_F77=no
+	  else
+	    lt_cv_archive_cmds_need_lc_F77=yes
+	  fi
+	  allow_undefined_flag_F77=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_F77" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_F77" >&6; }
+      archive_cmds_need_lc_F77=$lt_cv_archive_cmds_need_lc_F77
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_F77\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_F77\""
+    cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_f77_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_F77=
+if test -n "$hardcode_libdir_flag_spec_F77" ||
+   test -n "$runpath_var_F77" ||
+   test "X$hardcode_automatic_F77" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_F77" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
+     test "$hardcode_minus_L_F77" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_F77=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_F77=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_F77=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_F77" >&5
+$as_echo "$hardcode_action_F77" >&6; }
+
+if test "$hardcode_action_F77" = relink ||
+   test "$inherit_rpath_F77" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+  CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by f77demo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+f77demo config.status 1.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+LD_F77='`$ECHO "$LD_F77" | $SED "$delay_single_quote_subst"`'
+reload_flag_F77='`$ECHO "$reload_flag_F77" | $SED "$delay_single_quote_subst"`'
+reload_cmds_F77='`$ECHO "$reload_cmds_F77" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_F77='`$ECHO "$old_archive_cmds_F77" | $SED "$delay_single_quote_subst"`'
+compiler_F77='`$ECHO "$compiler_F77" | $SED "$delay_single_quote_subst"`'
+GCC_F77='`$ECHO "$GCC_F77" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_F77='`$ECHO "$lt_prog_compiler_no_builtin_flag_F77" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_F77='`$ECHO "$lt_prog_compiler_pic_F77" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_F77='`$ECHO "$lt_prog_compiler_wl_F77" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_F77='`$ECHO "$lt_prog_compiler_static_F77" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_F77='`$ECHO "$lt_cv_prog_compiler_c_o_F77" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_F77='`$ECHO "$archive_cmds_need_lc_F77" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_F77='`$ECHO "$enable_shared_with_static_runtimes_F77" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_F77='`$ECHO "$export_dynamic_flag_spec_F77" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_F77='`$ECHO "$whole_archive_flag_spec_F77" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_F77='`$ECHO "$compiler_needs_object_F77" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_F77='`$ECHO "$old_archive_from_new_cmds_F77" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_F77='`$ECHO "$old_archive_from_expsyms_cmds_F77" | $SED "$delay_single_quote_subst"`'
+archive_cmds_F77='`$ECHO "$archive_cmds_F77" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_F77='`$ECHO "$archive_expsym_cmds_F77" | $SED "$delay_single_quote_subst"`'
+module_cmds_F77='`$ECHO "$module_cmds_F77" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_F77='`$ECHO "$module_expsym_cmds_F77" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_F77='`$ECHO "$with_gnu_ld_F77" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_F77='`$ECHO "$allow_undefined_flag_F77" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_F77='`$ECHO "$no_undefined_flag_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_F77='`$ECHO "$hardcode_libdir_flag_spec_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_F77='`$ECHO "$hardcode_libdir_separator_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_F77='`$ECHO "$hardcode_direct_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_F77='`$ECHO "$hardcode_direct_absolute_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_F77='`$ECHO "$hardcode_minus_L_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_F77='`$ECHO "$hardcode_shlibpath_var_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_F77='`$ECHO "$hardcode_automatic_F77" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_F77='`$ECHO "$inherit_rpath_F77" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_F77='`$ECHO "$link_all_deplibs_F77" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_F77='`$ECHO "$always_export_symbols_F77" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_F77='`$ECHO "$export_symbols_cmds_F77" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_F77='`$ECHO "$exclude_expsyms_F77" | $SED "$delay_single_quote_subst"`'
+include_expsyms_F77='`$ECHO "$include_expsyms_F77" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_F77='`$ECHO "$prelink_cmds_F77" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_F77='`$ECHO "$postlink_cmds_F77" | $SED "$delay_single_quote_subst"`'
+file_list_spec_F77='`$ECHO "$file_list_spec_F77" | $SED "$delay_single_quote_subst"`'
+hardcode_action_F77='`$ECHO "$hardcode_action_F77" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+LD_F77 \
+reload_flag_F77 \
+compiler_F77 \
+lt_prog_compiler_no_builtin_flag_F77 \
+lt_prog_compiler_pic_F77 \
+lt_prog_compiler_wl_F77 \
+lt_prog_compiler_static_F77 \
+lt_cv_prog_compiler_c_o_F77 \
+export_dynamic_flag_spec_F77 \
+whole_archive_flag_spec_F77 \
+compiler_needs_object_F77 \
+with_gnu_ld_F77 \
+allow_undefined_flag_F77 \
+no_undefined_flag_F77 \
+hardcode_libdir_flag_spec_F77 \
+hardcode_libdir_separator_F77 \
+exclude_expsyms_F77 \
+include_expsyms_F77 \
+file_list_spec_F77; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+reload_cmds_F77 \
+old_archive_cmds_F77 \
+old_archive_from_new_cmds_F77 \
+old_archive_from_expsyms_cmds_F77 \
+archive_cmds_F77 \
+archive_expsym_cmds_F77 \
+module_cmds_F77 \
+module_expsym_cmds_F77 \
+export_symbols_cmds_F77 \
+prelink_cmds_F77 \
+postlink_cmds_F77; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h:config-h.in" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="F77 "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: F77
+
+# The linker used to build libraries.
+LD=$lt_LD_F77
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_F77
+reload_cmds=$lt_reload_cmds_F77
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_F77
+
+# A language specific compiler.
+CC=$lt_compiler_F77
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_F77
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_F77
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_F77
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_F77
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_F77
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_F77
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_F77
+archive_expsym_cmds=$lt_archive_expsym_cmds_F77
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_F77
+module_expsym_cmds=$lt_module_expsym_cmds_F77
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_F77
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_F77
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_F77
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_F77
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_F77
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_F77
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_F77
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_F77
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_F77
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_F77
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_F77
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_F77
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_F77
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_F77
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_F77
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_F77
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_F77
+
+# ### END LIBTOOL TAG CONFIG: F77
+_LT_EOF
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/tests/f77demo/configure.ac b/tests/f77demo/configure.ac
new file mode 100644
index 0000000..041fa06
--- /dev/null
+++ b/tests/f77demo/configure.ac
@@ -0,0 +1,71 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#   Copyright (C) 2001, 2003, 2005, 2007 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AC_PREREQ(2.54)
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([f77demo], [1.0], [bug-libtool@gnu.org])
+AC_CONFIG_HEADERS([config.h:config-h.in])
+AC_CONFIG_SRCDIR([foof.f])
+AC_CONFIG_AUX_DIR([../../libltdl/config])
+
+AC_ARG_WITH([dist], AS_HELP_STRING([--with-dist],
+				   [ignore errors not affecting `make dist']))
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+AC_PROG_CC
+
+## ------------------------ ##
+## Fortran compiler checks. ##
+## ------------------------ ##
+AC_PROG_F77
+dnl When configuring for `make dist' purposes, skip checks that may yield fatal
+dnl errors when there is no working F77 compiler.
+if test -z "$with_dist"; then
+  dnl Check the flags needed to link f77 programs with ld (i.e. cc)
+  AC_F77_LIBRARY_LDFLAGS
+  dnl Check for underscoring of external names
+  AC_F77_WRAPPERS
+fi
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LT_INIT
+AC_SUBST([LIBTOOL_DEPS])
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/tests/f77demo/cprogram.c b/tests/f77demo/cprogram.c
new file mode 100644
index 0000000..8495524
--- /dev/null
+++ b/tests/f77demo/cprogram.c
@@ -0,0 +1,54 @@
+/* cprogram.c
+
+   Copyright (C) 2002, 2005, 2006 Free Software Foundation, Inc.
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+
+int
+main ()
+{
+  int arg,cres,fres;
+  
+  printf ("Welcome to GNU libtool mixed C/Fortran demo!\n");
+  
+  arg=2;
+  
+  cres=csub(arg);
+  
+  printf ("The C subroutine returned, claiming that 2*%d = %d\n",arg,cres);
+  
+  if(cres==2*arg)
+    printf ("The C subroutine is ok!\n");
+  
+  printf("\nCalling the C wrapper routine...\n");
+  fres=fwrapper(arg);
+  
+  printf ("The C wrapper to the fortran subroutine returned,\n"
+	  "claiming that 2*%d = %d\n",arg,fres);
+  
+  if(fres==2*arg)
+    printf ("The Fortran 77 subroutine is ok!\n");
+  
+  return 0;
+}
+
diff --git a/tests/f77demo/foo.h b/tests/f77demo/foo.h
new file mode 100644
index 0000000..35d32f9
--- /dev/null
+++ b/tests/f77demo/foo.h
@@ -0,0 +1,55 @@
+/* foo.h -- interface to fortran and C libraries
+
+   Copyright (C) 1998-1999, 2006 Free Software Foundation, Inc.
+   Written by Eric Lindahl, 2002
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#ifndef _FOO_H_
+#define _FOO_H_ 1
+
+/* config.h is necessary for the fortran name mangling */
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+/* csub is an extremely useful subroutine that
+ * returns the argument multiplied by two :-)
+ */
+extern int csub(int);
+
+/* This routine performs the same action, but
+ * calls the fortran subroutine fsub to do the
+ * real work.
+ */
+extern int fwrapper(int);
+
+/* fsub does the same thing as csub, i.e. res=arg*2.
+ * Use autoconf macro for fortran function names.
+ * Note that fortran passes args by reference, so
+ * you need to provide pointers to your ints.
+ */
+extern
+#ifdef __cplusplus
+"C"
+#endif
+void F77_FUNC(fsub,FSUB)(int *arg, int *res);
+
+#endif
diff --git a/tests/f77demo/fooc.c b/tests/f77demo/fooc.c
new file mode 100644
index 0000000..3dca0ed
--- /dev/null
+++ b/tests/f77demo/fooc.c
@@ -0,0 +1,41 @@
+/* fooc.c
+
+   Copyright (C) 2002, 2005, 2006 Free Software Foundation, Inc.
+   Written by Eric Lindahl, 2002
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+
+int csub(int arg)
+{
+  return (2*arg);
+}
+
+
+int fwrapper(int arg)
+{
+  int res;
+  printf("Calling the Fortran 77 subroutine from the C wrapper...\n");
+  F77_FUNC(fsub,FSUB)(&arg,&res);
+  printf("Returned from the Fortran 77 subroutine...\n");
+  return res;
+}
diff --git a/tests/f77demo/foof.f b/tests/f77demo/foof.f
new file mode 100644
index 0000000..f899c49
--- /dev/null
+++ b/tests/f77demo/foof.f
@@ -0,0 +1,12 @@
+C 
+C This program is free software; you can redistribute it and/or
+C modify it under the terms of the GNU General Public License
+C as published by the Free Software Foundation; either version 2
+C of the License, or (at your option) any later version.
+C 
+
+      subroutine fsub(arg,res)
+      write(*,*) 'fsub called'
+      call fsubf(arg,res)
+      return
+      end
diff --git a/tests/f77demo/foof2.f b/tests/f77demo/foof2.f
new file mode 100644
index 0000000..e1f1550
--- /dev/null
+++ b/tests/f77demo/foof2.f
@@ -0,0 +1,14 @@
+C 
+C This program is free software; you can redistribute it and/or
+C modify it under the terms of the GNU General Public License
+C as published by the Free Software Foundation; either version 2
+C of the License, or (at your option) any later version.
+C 
+
+      subroutine fsubf(arg,res)
+      implicit none
+      integer*4 arg,res
+      write(*,*) 'fsubf called'
+      res=arg*2
+      return
+      end
diff --git a/tests/f77demo/foof3.f b/tests/f77demo/foof3.f
new file mode 100644
index 0000000..6d88204
--- /dev/null
+++ b/tests/f77demo/foof3.f
@@ -0,0 +1,14 @@
+C 
+C This program is free software; you can redistribute it and/or
+C modify it under the terms of the GNU General Public License
+C as published by the Free Software Foundation; either version 2
+C of the License, or (at your option) any later version.
+C 
+
+      subroutine fsub3(arg,res)
+      implicit none
+      integer*4 arg,res
+      write(*,*) 'fsub3 called'
+      res=arg*4
+      return
+      end
diff --git a/tests/f77demo/fprogram.f b/tests/f77demo/fprogram.f
new file mode 100644
index 0000000..f4b4ccd
--- /dev/null
+++ b/tests/f77demo/fprogram.f
@@ -0,0 +1,34 @@
+C 
+C This program is free software; you can redistribute it and/or
+C modify it under the terms of the GNU General Public License
+C as published by the Free Software Foundation; either version 2
+C of the License, or (at your option) any later version.
+C 
+
+      program fprogram
+      implicit none
+      integer*4 arg,res
+
+      write(*,*) 'Welcome to GNU libtool Fortran demo!'
+      write(*,*) 'Real programmers write in FORTRAN.'
+      arg=2
+
+      call fsub(arg,res)
+
+      write(*,*) 'fsub returned, saying that 2 *',arg,' =',res
+
+      if (res.eq.4) then
+         write(*,*) 'fsub is ok!'
+      endif
+
+      call fsub3(arg,res)
+
+      write(*,*) 'fsub3 returned, saying that 4 *',arg,' =',res
+
+      if (res.eq.8) then
+         write(*,*) 'fsub3 is ok!'
+      endif
+
+      stop
+      end
+
diff --git a/tests/fail.at b/tests/fail.at
new file mode 100644
index 0000000..cec954b
--- /dev/null
+++ b/tests/fail.at
@@ -0,0 +1,122 @@
+# fail.at -- test that libtool really fail when it should     -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2008, 2009 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# TODO: many possible failure cases missing.  (But how to simulate a full disk?)
+
+AT_SETUP([Failure tests])
+AT_KEYWORDS([libtool])
+eval `$LIBTOOL --config | $EGREP '^(pic_mode|pic_flag|build_old_libs|build_libtool_libs)='`
+LDFLAGS="$LDFLAGS -no-undefined"
+
+m4_pushdef([FAIL_CHECK],
+[AT_CHECK([if $1; then (exit 1); else :; fi], [0], [ignore], [ignore])
+])
+
+AT_DATA([script],
+[[#! /bin/sh
+exit 0
+]])
+chmod +x script
+if test -x script >/dev/null 2>&1; then
+  test_x="test -x"
+else
+  test_x=:
+fi
+
+# compile failure
+echo 'choke me' > a.c
+FAIL_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c])
+AT_CHECK([test -f a.lo], [1])
+
+# non-PIC compile failure
+case $pic_mode in default | no)
+  case " $CFLAGS " in
+   *\ -prefer-pic\ *) ;;
+   *)
+    case $build_old_libs,$pic_flag in yes,*-DPIC*)
+      AT_DATA([a.c], [[
+#ifndef PIC
+  choke me
+#endif
+]])
+      FAIL_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -no-suppress -c a.c])
+      AT_CHECK([test -f a.lo], [1])
+      ;;
+    esac
+    ;;
+  esac
+  ;;
+esac
+
+# program creation failure.
+# We can't rely on `main' not being present: the QNX linker
+# won't error out in that case, although the resulting binary won't work.
+# So we provoke a link failure due to an unresolved symbol, and require
+# libtool to fail only if the link without libtool would have failed, too.
+cat > a.c <<'EOF'
+extern int nonexistent_function (void);
+int main (void)
+{
+  return nonexistent_function ();
+}
+EOF
+$CC $CPPFLAGS $CFLAGS -c a.c
+if $CC $CFLAGS $LDFLAGS -o a$EXEEXT a.$OBJEXT; then :; else
+  rm -f a a$EXEEXT
+  FAIL_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o a$EXEEXT a.$OBJEXT])
+  AT_CHECK([{ test -f a && $test_x a; } || { test -f a$EXEEXT && $test_x a$EXEEXT; }], [1])
+  FAIL_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o a$EXEEXT a.$OBJEXT -static])
+  AT_CHECK([{ test -f a && $test_x a; } || { test -f a$EXEEXT && $test_x a$EXEEXT; }], [1])
+fi
+
+# shared library creation failure
+case $build_libtool_libs in yes)
+  echo 'int duplicate_name(void) { return 0; }' > a.c
+  echo 'double duplicate_name(double x) { return 2.*x; }' > b.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c b.c
+  # Unfortunately, this may actually succeed on AIX and IRIX  :(
+  # So, also add a bogus object file to provoke more failure.
+  echo 'int whatever(void) { return 0;}' > c.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c c.c
+  (
+    . ./c.lo
+    test "$pic_object" != none && echo choke me >"$pic_object"
+    test "$non_pic_object" != none && echo choke me >"$non_pic_object"
+  )
+  FAIL_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo b.lo c.lo -rpath /foo])
+  AT_CHECK([test -f liba.la], [1])
+  ;;
+esac
+
+# Ensure we diagnose '-L path'.
+echo 'int main () { return 0; }' > d.c
+echo 'int foo () { return 0; }' > space-after-L.c
+$CC $CPPFLAGS $CFLAGS -c d.c
+$CC $CPPFLAGS $CFLAGS -c space-after-L.c
+FAIL_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -L space-after-L.$OBJEXT -o d$EXEEXT d.$OBJEXT])
+FAIL_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o d$EXEEXT d.$OBJEXT -L])
+
+m4_popdef([FAIL_CHECK])
+AT_CLEANUP
diff --git a/tests/fcdemo-conf.test b/tests/fcdemo-conf.test
new file mode 100755
index 0000000..b7e08a6
--- /dev/null
+++ b/tests/fcdemo-conf.test
@@ -0,0 +1,42 @@
+#! /bin/sh
+# fcdemo-conf.test - try configuring the fcdemo subdirectory
+#
+#   Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/fcdemo"
+func_make_distclean
+# We do not want to fail if all we got was a Fortran 77 compiler.
+func_configure_nofail
+if test "$conf_status" -eq "$EXIT_FAILURE"; then
+  case `echo $FC | $SED $basename` in
+    g77* | f77* | xlf | xlf[_-]* | frt* | pgf77* | cf77* | fort77* | fl32* | af77*)
+       func_skip "The FC fortran tests do not work with Fortran 77 compilers" ;;
+    *) exit $EXIT_FAILURE
+  esac
+fi
+func_check_static_shared "yes" "yes"
+
+exit 0
diff --git a/tests/fcdemo-exec.test b/tests/fcdemo-exec.test
new file mode 100755
index 0000000..3ee57a8
--- /dev/null
+++ b/tests/fcdemo-exec.test
@@ -0,0 +1,35 @@
+#! /bin/sh
+# fcdemo-exec.test - check that programs in the fcdemo subdirectory are viable
+#
+#   Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "fcdemo-make" "tests/fcdemo/fprogram$EXEEXT" "tests/fcdemo/cprogram$EXEEXT"
+
+func_rmprefixdir
+func_exec_init "uninstalled"
+func_exec "tests/fcdemo/fprogram$EXEEXT"
+func_exec "tests/fcdemo/cprogram$EXEEXT"
+
+exit $exec_status
diff --git a/tests/fcdemo-make.test b/tests/fcdemo-make.test
new file mode 100755
index 0000000..3de3a58
--- /dev/null
+++ b/tests/fcdemo-make.test
@@ -0,0 +1,36 @@
+#! /bin/sh
+# fcdemo-make.test - try building in the fcdemo subdirectory
+#
+#   Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "fcdemo-conf" "tests/fcdemo/Makefile"
+
+func_rmprefixdir
+func_cd "tests/fcdemo"
+# May fail make on some platforms, simply "skip" in that case
+#func_make
+eval $MAKE || func_skip "The improved fortran tests catch a known failure mode"
+
+exit 0
diff --git a/tests/fcdemo-shared-exec.test b/tests/fcdemo-shared-exec.test
new file mode 100755
index 0000000..46ea71f
--- /dev/null
+++ b/tests/fcdemo-shared-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/fcdemo-exec.test
diff --git a/tests/fcdemo-shared-make.test b/tests/fcdemo-shared-make.test
new file mode 100755
index 0000000..5fc2c37
--- /dev/null
+++ b/tests/fcdemo-shared-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/fcdemo-make.test
diff --git a/tests/fcdemo-shared.test b/tests/fcdemo-shared.test
new file mode 100755
index 0000000..f20cb5d
--- /dev/null
+++ b/tests/fcdemo-shared.test
@@ -0,0 +1,42 @@
+#! /bin/sh
+# fcdemo-shared.test - try configuring the fcdemo subdirectory for shared libs
+#
+#   Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/fcdemo"
+func_make_distclean
+# We do not want to fail if all we got was a Fortran 77 compiler.
+func_configure_nofail "--disable-static"
+if test "$conf_status" -eq "$EXIT_FAILURE"; then
+  case `echo $FC | $SED $basename` in
+    g77* | f77* | xlf | xlf[_-]* | frt* | pgf77* | cf77* | fort77* | fl32* | af77*)
+       func_skip "The FC fortran tests do not work with Fortran 77 compilers" ;;
+    *) exit $EXIT_FAILURE
+  esac
+fi
+func_check_static_shared "no" "yes"
+
+exit 0
diff --git a/tests/fcdemo-static-exec.test b/tests/fcdemo-static-exec.test
new file mode 100755
index 0000000..46ea71f
--- /dev/null
+++ b/tests/fcdemo-static-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/fcdemo-exec.test
diff --git a/tests/fcdemo-static-make.test b/tests/fcdemo-static-make.test
new file mode 100755
index 0000000..5fc2c37
--- /dev/null
+++ b/tests/fcdemo-static-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/fcdemo-make.test
diff --git a/tests/fcdemo-static.test b/tests/fcdemo-static.test
new file mode 100755
index 0000000..0f8dede
--- /dev/null
+++ b/tests/fcdemo-static.test
@@ -0,0 +1,42 @@
+#! /bin/sh
+# fcdemo-static.test - try configuring the fcdemo subdirectory for static libs
+#
+#   Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/fcdemo"
+func_make_distclean
+# We do not want to fail if all we got was a Fortran 77 compiler.
+func_configure_nofail "--disable-shared"
+if test "$conf_status" -eq "$EXIT_FAILURE"; then
+  case `echo $FC | $SED $basename` in
+    g77* | f77* | xlf | xlf[_-]* | frt* | pgf77* | cf77* | fort77* | fl32* | af77*)
+       func_skip "The FC fortran tests do not work with Fortran 77 compilers" ;;
+    *) exit $EXIT_FAILURE
+  esac
+fi
+func_check_static_shared "yes" "no"
+
+exit 0
diff --git a/tests/fcdemo/Makefile.am b/tests/fcdemo/Makefile.am
new file mode 100644
index 0000000..299286e
--- /dev/null
+++ b/tests/fcdemo/Makefile.am
@@ -0,0 +1,75 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS  = -I ../../libltdl/m4
+AM_CPPFLAGS	 = -I$(top_srcdir)/../..
+
+lib_LTLIBRARIES = libfoo.la libmix.la libfoo2.la libfoo3.la
+
+libfoo_la_SOURCES = foof.f90
+libfoo_la_LDFLAGS = -no-undefined
+libfoo_la_LIBADD = libfoo2.la
+
+libfoo2_la_SOURCES = foof2.f90
+libfoo2_la_LDFLAGS = -no-undefined
+
+libfoo3_la_SOURCES = foof3.f90
+libfoo3_la_LDFLAGS = -no-undefined
+
+libmix_la_SOURCES = foof.f90 foof2.f90 fooc.c
+libmix_la_LDFLAGS = -no-undefined
+
+noinst_HEADERS = foo.h
+
+bin_PROGRAMS = fprogram cprogram
+
+fprogram_SOURCES = fprogram.f90
+fprogram_LDADD = libfoo.la libfoo3.la
+
+cprogram_SOURCES = cprogram.c
+cprogram_LDADD = libmix.la $(FCLIBS)
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# work around Automake bug not providing FCFLAGS_f90:
+.f90.o:
+	$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) $<
+
+.f90.obj:
+	$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) `$(CYGPATH_W) '$<'`
+
+.f90.lo:
+	$(LTFCCOMPILE) -c -o $@ $(FCFLAGS_f90) $<
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
diff --git a/tests/fcdemo/Makefile.in b/tests/fcdemo/Makefile.in
new file mode 100644
index 0000000..65d5fab
--- /dev/null
+++ b/tests/fcdemo/Makefile.in
@@ -0,0 +1,822 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = fprogram$(EXEEXT) cprogram$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \
+	$(srcdir)/../../libltdl/config/config.guess \
+	$(srcdir)/../../libltdl/config/config.sub \
+	$(srcdir)/../../libltdl/config/install-sh \
+	$(srcdir)/../../libltdl/config/ltmain.sh \
+	$(srcdir)/../../libltdl/config/missing $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/config-h.in \
+	$(top_srcdir)/configure ../../libltdl/config/compile \
+	../../libltdl/config/config.guess \
+	../../libltdl/config/config.sub ../../libltdl/config/depcomp \
+	../../libltdl/config/install-sh ../../libltdl/config/ltmain.sh \
+	../../libltdl/config/mdate-sh ../../libltdl/config/missing \
+	../../libltdl/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libfoo_la_DEPENDENCIES = libfoo2.la
+am_libfoo_la_OBJECTS = foof.lo
+libfoo_la_OBJECTS = $(am_libfoo_la_OBJECTS)
+libfoo_la_LINK = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
+	$(libfoo_la_LDFLAGS) $(LDFLAGS) -o $@
+libfoo2_la_LIBADD =
+am_libfoo2_la_OBJECTS = foof2.lo
+libfoo2_la_OBJECTS = $(am_libfoo2_la_OBJECTS)
+libfoo2_la_LINK = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
+	$(libfoo2_la_LDFLAGS) $(LDFLAGS) -o $@
+libfoo3_la_LIBADD =
+am_libfoo3_la_OBJECTS = foof3.lo
+libfoo3_la_OBJECTS = $(am_libfoo3_la_OBJECTS)
+libfoo3_la_LINK = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
+	$(libfoo3_la_LDFLAGS) $(LDFLAGS) -o $@
+libmix_la_LIBADD =
+am_libmix_la_OBJECTS = foof.lo foof2.lo fooc.lo
+libmix_la_OBJECTS = $(am_libmix_la_OBJECTS)
+libmix_la_LINK = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) \
+	$(libmix_la_LDFLAGS) $(LDFLAGS) -o $@
+PROGRAMS = $(bin_PROGRAMS)
+am_cprogram_OBJECTS = cprogram.$(OBJEXT)
+cprogram_OBJECTS = $(am_cprogram_OBJECTS)
+am__DEPENDENCIES_1 =
+cprogram_DEPENDENCIES = libmix.la $(am__DEPENDENCIES_1)
+am_fprogram_OBJECTS = fprogram.$(OBJEXT)
+fprogram_OBJECTS = $(am_fprogram_OBJECTS)
+fprogram_DEPENDENCIES = libfoo.la libfoo3.la
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+FCCOMPILE = $(FC) $(AM_FCFLAGS) $(FCFLAGS)
+LTFCCOMPILE = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(FC) $(AM_FCFLAGS) $(FCFLAGS)
+FCLD = $(FC)
+FCLINK = $(LIBTOOL) --tag=FC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(FCLD) $(AM_FCFLAGS) $(FCFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libfoo_la_SOURCES) $(libfoo2_la_SOURCES) \
+	$(libfoo3_la_SOURCES) $(libmix_la_SOURCES) $(cprogram_SOURCES) \
+	$(fprogram_SOURCES)
+DIST_SOURCES = $(libfoo_la_SOURCES) $(libfoo2_la_SOURCES) \
+	$(libfoo3_la_SOURCES) $(libmix_la_SOURCES) $(cprogram_SOURCES) \
+	$(fprogram_SOURCES)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FC = @FC@
+FCFLAGS = @FCFLAGS@
+FCFLAGS_f90 = @FCFLAGS_f90@
+FCLIBS = @FCLIBS@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+ac_ct_FC = @ac_ct_FC@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS = -I ../../libltdl/m4
+AM_CPPFLAGS = -I$(top_srcdir)/../..
+lib_LTLIBRARIES = libfoo.la libmix.la libfoo2.la libfoo3.la
+libfoo_la_SOURCES = foof.f90
+libfoo_la_LDFLAGS = -no-undefined
+libfoo_la_LIBADD = libfoo2.la
+libfoo2_la_SOURCES = foof2.f90
+libfoo2_la_LDFLAGS = -no-undefined
+libfoo3_la_SOURCES = foof3.f90
+libfoo3_la_LDFLAGS = -no-undefined
+libmix_la_SOURCES = foof.f90 foof2.f90 fooc.c
+libmix_la_LDFLAGS = -no-undefined
+noinst_HEADERS = foo.h
+fprogram_SOURCES = fprogram.f90
+fprogram_LDADD = libfoo.la libfoo3.la
+cprogram_SOURCES = cprogram.c
+cprogram_LDADD = libmix.la $(FCLIBS)
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .f90 .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config-h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config-h.in:  $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libfoo.la: $(libfoo_la_OBJECTS) $(libfoo_la_DEPENDENCIES) 
+	$(libfoo_la_LINK) -rpath $(libdir) $(libfoo_la_OBJECTS) $(libfoo_la_LIBADD) $(LIBS)
+libfoo2.la: $(libfoo2_la_OBJECTS) $(libfoo2_la_DEPENDENCIES) 
+	$(libfoo2_la_LINK) -rpath $(libdir) $(libfoo2_la_OBJECTS) $(libfoo2_la_LIBADD) $(LIBS)
+libfoo3.la: $(libfoo3_la_OBJECTS) $(libfoo3_la_DEPENDENCIES) 
+	$(libfoo3_la_LINK) -rpath $(libdir) $(libfoo3_la_OBJECTS) $(libfoo3_la_LIBADD) $(LIBS)
+libmix.la: $(libmix_la_OBJECTS) $(libmix_la_DEPENDENCIES) 
+	$(libmix_la_LINK) -rpath $(libdir) $(libmix_la_OBJECTS) $(libmix_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+cprogram$(EXEEXT): $(cprogram_OBJECTS) $(cprogram_DEPENDENCIES) 
+	@rm -f cprogram$(EXEEXT)
+	$(LINK) $(cprogram_OBJECTS) $(cprogram_LDADD) $(LIBS)
+fprogram$(EXEEXT): $(fprogram_OBJECTS) $(fprogram_DEPENDENCIES) 
+	@rm -f fprogram$(EXEEXT)
+	$(FCLINK) $(fprogram_OBJECTS) $(fprogram_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES) config-h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config-h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES) config-h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS) config-h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS) config.h
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-hdr distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-libLTLIBRARIES
+
+.MAKE: all install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
+	dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-compile distclean-generic distclean-hdr \
+	distclean-libtool distclean-local distclean-tags \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-libLTLIBRARIES \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-binPROGRAMS uninstall-libLTLIBRARIES
+
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# work around Automake bug not providing FCFLAGS_f90:
+.f90.o:
+	$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) $<
+
+.f90.obj:
+	$(FCCOMPILE) -c -o $@ $(FCFLAGS_f90) `$(CYGPATH_W) '$<'`
+
+.f90.lo:
+	$(LTFCCOMPILE) -c -o $@ $(FCFLAGS_f90) $<
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/fcdemo/README b/tests/fcdemo/README
new file mode 100644
index 0000000..50cee2b
--- /dev/null
+++ b/tests/fcdemo/README
@@ -0,0 +1,16 @@
+This is a short demo of the fortran support in libtool.
+
+fprogram is a pure-fortran program which is linked 
+against the fortran-only library libfoo.la
+
+cprogram is a C program, which is linked against the
+mixed C and fortran library libmix.la. The program
+calls a C function, which in turn calls a fortran 
+function.
+
+This demo requires GNU autoconf, automake, 
+libtool with the FC tag and quite obvious Fortran.
+
+
+
+
diff --git a/tests/fcdemo/aclocal.m4 b/tests/fcdemo/aclocal.m4
new file mode 100644
index 0000000..d479ce3
--- /dev/null
+++ b/tests/fcdemo/aclocal.m4
@@ -0,0 +1,956 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../libltdl/m4/libtool.m4])
+m4_include([../../libltdl/m4/ltoptions.m4])
+m4_include([../../libltdl/m4/ltsugar.m4])
+m4_include([../../libltdl/m4/ltversion.m4])
+m4_include([../../libltdl/m4/lt~obsolete.m4])
diff --git a/tests/fcdemo/config-h.in b/tests/fcdemo/config-h.in
new file mode 100644
index 0000000..0f9615c
--- /dev/null
+++ b/tests/fcdemo/config-h.in
@@ -0,0 +1,76 @@
+/* config-h.in.  Generated from configure.ac by autoheader.  */
+
+/* Define to dummy `main' function (if any) required to link to the Fortran
+   libraries. */
+#undef FC_DUMMY_MAIN
+
+/* Define if F77 and FC dummy `main' functions are identical. */
+#undef FC_DUMMY_MAIN_EQ_F77
+
+/* Define to a macro mangling the given C identifier (in lower and upper
+   case), which must not contain underscores, for linking with Fortran. */
+#undef FC_FUNC
+
+/* As FC_FUNC, but for C identifiers containing underscores. */
+#undef FC_FUNC_
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Version number of package */
+#undef VERSION
diff --git a/tests/fcdemo/configure b/tests/fcdemo/configure
new file mode 100755
index 0000000..2812a0d
--- /dev/null
+++ b/tests/fcdemo/configure
@@ -0,0 +1,17871 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for fcdemo 1.0.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='fcdemo'
+PACKAGE_TARNAME='fcdemo'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='fcdemo 1.0'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="foof.f90"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+LIBTOOL_DEPS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+FCFLAGS_f90
+FCLIBS
+ac_ct_FC
+FCFLAGS
+FC
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+with_dist
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+FC
+FCFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures fcdemo 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/fcdemo]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of fcdemo 1.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-dist             ignore errors not affecting `make dist'
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  FC          Fortran compiler command
+  FCFLAGS     Fortran compiler flags
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+fcdemo configure 1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_fc_try_compile LINENO
+# ---------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_fc_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_fc_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_fc_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_fc_try_link LINENO
+# ------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_fc_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_fc_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_fc_try_link
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by fcdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_config_headers="$ac_config_headers config.h:config-h.in"
+
+
+ac_aux_dir=
+for ac_dir in ../../libltdl/config "$srcdir"/../../libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../libltdl/config \"$srcdir\"/../../libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+# Check whether --with-dist was given.
+if test "${with_dist+set}" = set; then :
+  withval=$with_dist;
+fi
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='fcdemo'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+## ------------------------ ##
+## Fortran compiler checks. ##
+## ------------------------ ##
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$FC"; then
+  ac_cv_prog_FC="$FC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_FC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+FC=$ac_cv_prog_FC
+if test -n "$FC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $FC" >&5
+$as_echo "$FC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$FC" && break
+  done
+fi
+if test -z "$FC"; then
+  ac_ct_FC=$FC
+  for ac_prog in gfortran g95 xlf95 f95 fort ifort ifc efc pgfortran pgf95 lf95 ftn xlf90 f90 pgf90 pghpf epcf90 g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_FC"; then
+  ac_cv_prog_ac_ct_FC="$ac_ct_FC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_FC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_FC=$ac_cv_prog_ac_ct_FC
+if test -n "$ac_ct_FC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_FC" >&5
+$as_echo "$ac_ct_FC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_FC" && break
+done
+
+  if test "x$ac_ct_FC" = x; then
+    FC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    FC=$ac_ct_FC
+  fi
+fi
+
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file.  (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU Fortran compiler" >&5
+$as_echo_n "checking whether we are using the GNU Fortran compiler... " >&6; }
+if ${ac_cv_fc_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+#ifndef __GNUC__
+       choke me
+#endif
+
+      end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_fc_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_compiler_gnu" >&5
+$as_echo "$ac_cv_fc_compiler_gnu" >&6; }
+ac_ext=$ac_save_ext
+ac_test_FCFLAGS=${FCFLAGS+set}
+ac_save_FCFLAGS=$FCFLAGS
+FCFLAGS=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $FC accepts -g" >&5
+$as_echo_n "checking whether $FC accepts -g... " >&6; }
+if ${ac_cv_prog_fc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  FCFLAGS=-g
+cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+  ac_cv_prog_fc_g=yes
+else
+  ac_cv_prog_fc_g=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_g" >&5
+$as_echo "$ac_cv_prog_fc_g" >&6; }
+if test "$ac_test_FCFLAGS" = set; then
+  FCFLAGS=$ac_save_FCFLAGS
+elif test $ac_cv_prog_fc_g = yes; then
+  if test "x$ac_cv_fc_compiler_gnu" = xyes; then
+    FCFLAGS="-g -O2"
+  else
+    FCFLAGS="-g"
+  fi
+else
+  if test "x$ac_cv_fc_compiler_gnu" = xyes; then
+    FCFLAGS="-O2"
+  else
+    FCFLAGS=
+  fi
+fi
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+if test -z "$with_dist"; then
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to get verbose linking output from $FC" >&5
+$as_echo_n "checking how to get verbose linking output from $FC... " >&6; }
+if ${ac_cv_prog_fc_v+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+  ac_cv_prog_fc_v=
+# Try some options frequently used verbose output
+for ac_verb in -v -verbose --verbose -V -\#\#\#; do
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+
+# Compile and link our simple test program by passing a flag (argument
+# 1 to this macro) to the Fortran compiler in order to get
+# "verbose" output that we can then parse for the Fortran linker
+# flags.
+ac_save_FCFLAGS=$FCFLAGS
+FCFLAGS="$FCFLAGS $ac_verb"
+eval "set x $ac_link"
+shift
+$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5
+# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH,
+# LIBRARY_PATH; skip all such settings.
+ac_fc_v_output=`eval $ac_link 5>&1 2>&1 |
+  sed '/^Driving:/d; /^Configured with:/d;
+      '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"`
+$as_echo "$ac_fc_v_output" >&5
+FCFLAGS=$ac_save_FCFLAGS
+
+rm -rf conftest*
+
+# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where
+# /foo, /bar, and /baz are search directories for the Fortran linker.
+# Here, we change these into -L/foo -L/bar -L/baz (and put it first):
+ac_fc_v_output="`echo $ac_fc_v_output |
+	grep 'LPATH is:' |
+	sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_fc_v_output"
+
+# FIXME: we keep getting bitten by quoted arguments; a more general fix
+#        that detects unbalanced quotes in FLIBS should be implemented
+#        and (ugh) tested at some point.
+case $ac_fc_v_output in
+  # If we are using xlf then replace all the commas with spaces.
+  *xlfentry*)
+    ac_fc_v_output=`echo $ac_fc_v_output | sed 's/,/ /g'` ;;
+
+  # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted
+  # $LIBS confuse us, and the libraries appear later in the output anyway).
+  *mGLOB_options_string*)
+    ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;;
+
+  # Portland Group compiler has singly- or doubly-quoted -cmdline argument
+  # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4.
+  # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2".
+  *-cmdline\ * | *-ignore\ * | *-def\ *)
+    ac_fc_v_output=`echo $ac_fc_v_output | sed "\
+	s/-cmdline  *'[^']*'/ /g; s/-cmdline  *\"[^\"]*\"/ /g
+	s/-ignore  *'[^']*'/ /g; s/-ignore  *\"[^\"]*\"/ /g
+	s/-def  *'[^']*'/ /g; s/-def  *\"[^\"]*\"/ /g"` ;;
+
+  # If we are using Cray Fortran then delete quotes.
+  *cft90*)
+    ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"//g'` ;;
+esac
+
+
+  # look for -l* and *.a constructs in the output
+  for ac_arg in $ac_fc_v_output; do
+     case $ac_arg in
+	[\\/]*.a | ?:[\\/]*.a | -[lLRu]*)
+	  ac_cv_prog_fc_v=$ac_verb
+	  break 2 ;;
+     esac
+  done
+done
+if test -z "$ac_cv_prog_fc_v"; then
+   { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot determine how to obtain linking information from $FC" >&5
+$as_echo "$as_me: WARNING: cannot determine how to obtain linking information from $FC" >&2;}
+fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: compilation failed" >&5
+$as_echo "$as_me: WARNING: compilation failed" >&2;}
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_fc_v" >&5
+$as_echo "$ac_cv_prog_fc_v" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran libraries of $FC" >&5
+$as_echo_n "checking for Fortran libraries of $FC... " >&6; }
+if ${ac_cv_fc_libs+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$FCLIBS" != "x"; then
+  ac_cv_fc_libs="$FCLIBS" # Let the user override the test.
+else
+
+cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+
+# Compile and link our simple test program by passing a flag (argument
+# 1 to this macro) to the Fortran compiler in order to get
+# "verbose" output that we can then parse for the Fortran linker
+# flags.
+ac_save_FCFLAGS=$FCFLAGS
+FCFLAGS="$FCFLAGS $ac_cv_prog_fc_v"
+eval "set x $ac_link"
+shift
+$as_echo "$as_me:${as_lineno-$LINENO}: $*" >&5
+# gfortran 4.3 outputs lines setting COLLECT_GCC_OPTIONS, COMPILER_PATH,
+# LIBRARY_PATH; skip all such settings.
+ac_fc_v_output=`eval $ac_link 5>&1 2>&1 |
+  sed '/^Driving:/d; /^Configured with:/d;
+      '"/^[_$as_cr_Letters][_$as_cr_alnum]*=/d"`
+$as_echo "$ac_fc_v_output" >&5
+FCFLAGS=$ac_save_FCFLAGS
+
+rm -rf conftest*
+
+# On HP/UX there is a line like: "LPATH is: /foo:/bar:/baz" where
+# /foo, /bar, and /baz are search directories for the Fortran linker.
+# Here, we change these into -L/foo -L/bar -L/baz (and put it first):
+ac_fc_v_output="`echo $ac_fc_v_output |
+	grep 'LPATH is:' |
+	sed 's|.*LPATH is\(: *[^ ]*\).*|\1|;s|: */| -L/|g'` $ac_fc_v_output"
+
+# FIXME: we keep getting bitten by quoted arguments; a more general fix
+#        that detects unbalanced quotes in FLIBS should be implemented
+#        and (ugh) tested at some point.
+case $ac_fc_v_output in
+  # If we are using xlf then replace all the commas with spaces.
+  *xlfentry*)
+    ac_fc_v_output=`echo $ac_fc_v_output | sed 's/,/ /g'` ;;
+
+  # With Intel ifc, ignore the quoted -mGLOB_options_string stuff (quoted
+  # $LIBS confuse us, and the libraries appear later in the output anyway).
+  *mGLOB_options_string*)
+    ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"-mGLOB[^"]*"/ /g'` ;;
+
+  # Portland Group compiler has singly- or doubly-quoted -cmdline argument
+  # Singly-quoted arguments were reported for versions 5.2-4 and 6.0-4.
+  # Doubly-quoted arguments were reported for "PGF90/x86 Linux/x86 5.0-2".
+  *-cmdline\ * | *-ignore\ * | *-def\ *)
+    ac_fc_v_output=`echo $ac_fc_v_output | sed "\
+	s/-cmdline  *'[^']*'/ /g; s/-cmdline  *\"[^\"]*\"/ /g
+	s/-ignore  *'[^']*'/ /g; s/-ignore  *\"[^\"]*\"/ /g
+	s/-def  *'[^']*'/ /g; s/-def  *\"[^\"]*\"/ /g"` ;;
+
+  # If we are using Cray Fortran then delete quotes.
+  *cft90*)
+    ac_fc_v_output=`echo $ac_fc_v_output | sed 's/"//g'` ;;
+esac
+
+
+
+ac_cv_fc_libs=
+
+# Save positional arguments (if any)
+ac_save_positional="$@"
+
+set X $ac_fc_v_output
+while test $# != 1; do
+  shift
+  ac_arg=$1
+  case $ac_arg in
+	[\\/]*.a | ?:[\\/]*.a)
+	    ac_exists=false
+  for ac_i in $ac_cv_fc_libs; do
+    if test x"$ac_arg" = x"$ac_i"; then
+      ac_exists=true
+      break
+    fi
+  done
+
+  if test x"$ac_exists" = xtrue; then :
+
+else
+  ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+fi
+	  ;;
+	-bI:*)
+	    ac_exists=false
+  for ac_i in $ac_cv_fc_libs; do
+    if test x"$ac_arg" = x"$ac_i"; then
+      ac_exists=true
+      break
+    fi
+  done
+
+  if test x"$ac_exists" = xtrue; then :
+
+else
+  if test "$ac_compiler_gnu" = yes; then
+  for ac_link_opt in $ac_arg; do
+    ac_cv_fc_libs="$ac_cv_fc_libs -Xlinker $ac_link_opt"
+  done
+else
+  ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+fi
+fi
+	  ;;
+	  # Ignore these flags.
+	-lang* | -lcrt*.o | -lc | -lgcc* | -lSystem | -libmil | -little \
+	  |-LANG:=* | -LIST:* | -LNO:* | -link)
+	  ;;
+	-lkernel32)
+	  test x"$CYGWIN" != xyes && ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+	  ;;
+	-[LRuYz])
+	  # These flags, when seen by themselves, take an argument.
+	  # We remove the space between option and argument and re-iterate
+	  # unless we find an empty arg or a new option (starting with -)
+	  case $2 in
+	     "" | -*);;
+	     *)
+		ac_arg="$ac_arg$2"
+		shift; shift
+		set X $ac_arg "$@"
+		;;
+	  esac
+	  ;;
+	-YP,*)
+	  for ac_j in `$as_echo "$ac_arg" | sed -e 's/-YP,/-L/;s/:/ -L/g'`; do
+	      ac_exists=false
+  for ac_i in $ac_cv_fc_libs; do
+    if test x"$ac_j" = x"$ac_i"; then
+      ac_exists=true
+      break
+    fi
+  done
+
+  if test x"$ac_exists" = xtrue; then :
+
+else
+  ac_arg="$ac_arg $ac_j"
+			       ac_cv_fc_libs="$ac_cv_fc_libs $ac_j"
+fi
+	  done
+	  ;;
+	-[lLR]*)
+	    ac_exists=false
+  for ac_i in $ac_cv_fc_libs; do
+    if test x"$ac_arg" = x"$ac_i"; then
+      ac_exists=true
+      break
+    fi
+  done
+
+  if test x"$ac_exists" = xtrue; then :
+
+else
+  ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+fi
+	  ;;
+	-zallextract*| -zdefaultextract)
+	  ac_cv_fc_libs="$ac_cv_fc_libs $ac_arg"
+	  ;;
+	  # Ignore everything else.
+  esac
+done
+# restore positional arguments
+set X $ac_save_positional; shift
+
+# We only consider "LD_RUN_PATH" on Solaris systems.  If this is seen,
+# then we insist that the "run path" must be an absolute path (i.e. it
+# must begin with a "/").
+case `(uname -sr) 2>/dev/null` in
+   "SunOS 5"*)
+      ac_ld_run_path=`$as_echo "$ac_fc_v_output" |
+			sed -n 's,^.*LD_RUN_PATH *= *\(/[^ ]*\).*$,-R\1,p'`
+      test "x$ac_ld_run_path" != x &&
+	if test "$ac_compiler_gnu" = yes; then
+  for ac_link_opt in $ac_ld_run_path; do
+    ac_cv_fc_libs="$ac_cv_fc_libs -Xlinker $ac_link_opt"
+  done
+else
+  ac_cv_fc_libs="$ac_cv_fc_libs $ac_ld_run_path"
+fi
+      ;;
+esac
+fi # test "x$[]_AC_LANG_PREFIX[]LIBS" = "x"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_libs" >&5
+$as_echo "$ac_cv_fc_libs" >&6; }
+FCLIBS="$ac_cv_fc_libs"
+
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dummy main to link with Fortran libraries" >&5
+$as_echo_n "checking for dummy main to link with Fortran libraries... " >&6; }
+if ${ac_cv_fc_dummy_main+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_fc_dm_save_LIBS=$LIBS
+ LIBS="$LIBS $FCLIBS"
+ ac_fortran_dm_var=FC_DUMMY_MAIN
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ # First, try linking without a dummy main:
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_fortran_dummy_main=none
+else
+  ac_cv_fortran_dummy_main=unknown
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+
+ if test $ac_cv_fortran_dummy_main = unknown; then
+   for ac_func in MAIN__ MAIN_ __main MAIN _MAIN __MAIN main_ main__ _main; do
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#define $ac_fortran_dm_var $ac_func
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_fortran_dummy_main=$ac_func; break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+   done
+ fi
+ ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+ ac_cv_fc_dummy_main=$ac_cv_fortran_dummy_main
+ rm -rf conftest*
+ LIBS=$ac_fc_dm_save_LIBS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_dummy_main" >&5
+$as_echo "$ac_cv_fc_dummy_main" >&6; }
+FC_DUMMY_MAIN=$ac_cv_fc_dummy_main
+if test "$FC_DUMMY_MAIN" != unknown; then :
+  if test $FC_DUMMY_MAIN != none; then
+
+cat >>confdefs.h <<_ACEOF
+#define FC_DUMMY_MAIN $FC_DUMMY_MAIN
+_ACEOF
+
+  if test "x$ac_cv_fc_dummy_main" = "x$ac_cv_f77_dummy_main"; then
+
+$as_echo "#define FC_DUMMY_MAIN_EQ_F77 1" >>confdefs.h
+
+  fi
+fi
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "linking to Fortran libraries from C fails
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran name-mangling scheme" >&5
+$as_echo_n "checking for Fortran name-mangling scheme... " >&6; }
+if ${ac_cv_fc_mangling+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      subroutine foobar()
+      return
+      end
+      subroutine foo_bar()
+      return
+      end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+  mv conftest.$ac_objext cfortran_test.$ac_objext
+
+  ac_save_LIBS=$LIBS
+  LIBS="cfortran_test.$ac_objext $LIBS $FCLIBS"
+
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+  ac_success=no
+  for ac_foobar in foobar FOOBAR; do
+    for ac_underscore in "" "_"; do
+      ac_func="$ac_foobar$ac_underscore"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $ac_func ();
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+return $ac_func ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_success=yes; break 2
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    done
+  done
+  ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+  if test "$ac_success" = "yes"; then
+     case $ac_foobar in
+	foobar)
+	   ac_case=lower
+	   ac_foo_bar=foo_bar
+	   ;;
+	FOOBAR)
+	   ac_case=upper
+	   ac_foo_bar=FOO_BAR
+	   ;;
+     esac
+
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+     ac_success_extra=no
+     for ac_extra in "" "_"; do
+	ac_func="$ac_foo_bar$ac_underscore$ac_extra"
+	cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $ac_func ();
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+return $ac_func ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_success_extra=yes; break
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     done
+     ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+     if test "$ac_success_extra" = "yes"; then
+	ac_cv_fc_mangling="$ac_case case"
+	if test -z "$ac_underscore"; then
+	   ac_cv_fc_mangling="$ac_cv_fc_mangling, no underscore"
+	else
+	   ac_cv_fc_mangling="$ac_cv_fc_mangling, underscore"
+	fi
+	if test -z "$ac_extra"; then
+	   ac_cv_fc_mangling="$ac_cv_fc_mangling, no extra underscore"
+	else
+	   ac_cv_fc_mangling="$ac_cv_fc_mangling, extra underscore"
+	fi
+      else
+	ac_cv_fc_mangling="unknown"
+      fi
+  else
+     ac_cv_fc_mangling="unknown"
+  fi
+
+  LIBS=$ac_save_LIBS
+  rm -rf conftest*
+  rm -f cfortran_test*
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compile a simple Fortran program
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_mangling" >&5
+$as_echo "$ac_cv_fc_mangling" >&6; }
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+case $ac_cv_fc_mangling in
+  "lower case, no underscore, no extra underscore")
+	  $as_echo "#define FC_FUNC(name,NAME) name" >>confdefs.h
+
+	  $as_echo "#define FC_FUNC_(name,NAME) name" >>confdefs.h
+ ;;
+  "lower case, no underscore, extra underscore")
+	  $as_echo "#define FC_FUNC(name,NAME) name" >>confdefs.h
+
+	  $as_echo "#define FC_FUNC_(name,NAME) name ## _" >>confdefs.h
+ ;;
+  "lower case, underscore, no extra underscore")
+	  $as_echo "#define FC_FUNC(name,NAME) name ## _" >>confdefs.h
+
+	  $as_echo "#define FC_FUNC_(name,NAME) name ## _" >>confdefs.h
+ ;;
+  "lower case, underscore, extra underscore")
+	  $as_echo "#define FC_FUNC(name,NAME) name ## _" >>confdefs.h
+
+	  $as_echo "#define FC_FUNC_(name,NAME) name ## __" >>confdefs.h
+ ;;
+  "upper case, no underscore, no extra underscore")
+	  $as_echo "#define FC_FUNC(name,NAME) NAME" >>confdefs.h
+
+	  $as_echo "#define FC_FUNC_(name,NAME) NAME" >>confdefs.h
+ ;;
+  "upper case, no underscore, extra underscore")
+	  $as_echo "#define FC_FUNC(name,NAME) NAME" >>confdefs.h
+
+	  $as_echo "#define FC_FUNC_(name,NAME) NAME ## _" >>confdefs.h
+ ;;
+  "upper case, underscore, no extra underscore")
+	  $as_echo "#define FC_FUNC(name,NAME) NAME ## _" >>confdefs.h
+
+	  $as_echo "#define FC_FUNC_(name,NAME) NAME ## _" >>confdefs.h
+ ;;
+  "upper case, underscore, extra underscore")
+	  $as_echo "#define FC_FUNC(name,NAME) NAME ## _" >>confdefs.h
+
+	  $as_echo "#define FC_FUNC_(name,NAME) NAME ## __" >>confdefs.h
+ ;;
+  *)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unknown Fortran name-mangling scheme" >&5
+$as_echo "$as_me: WARNING: unknown Fortran name-mangling scheme" >&2;}
+	  ;;
+esac
+
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+      ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran flag to compile .f90 files" >&5
+$as_echo_n "checking for Fortran flag to compile .f90 files... " >&6; }
+if ${ac_cv_fc_srcext_f90+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=f90
+ac_fcflags_srcext_save=$ac_fcflags_srcext
+ac_fcflags_srcext=
+ac_cv_fc_srcext_f90=unknown
+for ac_flag in none -qsuffix=f=f90 -Tf; do
+  test "x$ac_flag" != xnone && ac_fcflags_srcext="$ac_flag"
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+  ac_cv_fc_srcext_f90=$ac_flag; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest.$ac_objext conftest.f90
+ac_fcflags_srcext=$ac_fcflags_srcext_save
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_srcext_f90" >&5
+$as_echo "$ac_cv_fc_srcext_f90" >&6; }
+if test "x$ac_cv_fc_srcext_f90" = xunknown; then
+  as_fn_error $? "Fortran could not compile .f90 files" "$LINENO" 5
+else
+  ac_fc_srcext=f90
+  if test "x$ac_cv_fc_srcext_f90" = xnone; then
+    ac_fcflags_srcext=""
+    FCFLAGS_f90=""
+  else
+    ac_fcflags_srcext=$ac_cv_fc_srcext_f90
+    FCFLAGS_f90=$ac_cv_fc_srcext_f90
+  fi
+
+
+fi
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+    ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Fortran flag needed to accept free-form source" >&5
+$as_echo_n "checking for Fortran flag needed to accept free-form source... " >&6; }
+if ${ac_cv_fc_freeform+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_fc_freeform=unknown
+ac_fc_freeform_FCFLAGS_save=$FCFLAGS
+for ac_flag in none -ffree-form -FR -free -qfree -Mfree -Mfreeform \
+	       -freeform "-f free" +source=free -nfix
+do
+  test "x$ac_flag" != xnone && FCFLAGS="$ac_fc_freeform_FCFLAGS_save $ac_flag"
+  cat > conftest.$ac_ext <<_ACEOF
+
+  program freeform
+       ! FIXME: how to best confuse non-freeform compilers?
+       print *, 'Hello ', &
+          'world.'
+       end
+_ACEOF
+if ac_fn_fc_try_compile "$LINENO"; then :
+  ac_cv_fc_freeform=$ac_flag; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+FCFLAGS=$ac_fc_freeform_FCFLAGS_save
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_fc_freeform" >&5
+$as_echo "$ac_cv_fc_freeform" >&6; }
+if test "x$ac_cv_fc_freeform" = xunknown; then
+  as_fn_error 77 "Fortran does not accept free-form source" "$LINENO" 5
+else
+  if test "x$ac_cv_fc_freeform" != xnone; then
+    FCFLAGS="$FCFLAGS $ac_cv_fc_freeform"
+  fi
+
+fi
+ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+func_stripname_cnf ()
+{
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
+
+
+
+
+
+# Set options
+
+
+
+        enable_dlopen=no
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+#ifdef FC_DUMMY_MAIN
+#ifndef FC_DUMMY_MAIN_EQ_F77
+#  ifdef __cplusplus
+     extern "C"
+#  endif
+   int FC_DUMMY_MAIN() { return 1; }
+#endif
+#endif
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+      ac_ext=${ac_fc_srcext-f}
+ac_compile='$FC -c $FCFLAGS $ac_fcflags_srcext conftest.$ac_ext >&5'
+ac_link='$FC -o conftest$ac_exeext $FCFLAGS $LDFLAGS $ac_fcflags_srcext conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_fc_compiler_gnu
+
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+
+archive_cmds_need_lc_FC=no
+allow_undefined_flag_FC=
+always_export_symbols_FC=no
+archive_expsym_cmds_FC=
+export_dynamic_flag_spec_FC=
+hardcode_direct_FC=no
+hardcode_direct_absolute_FC=no
+hardcode_libdir_flag_spec_FC=
+hardcode_libdir_separator_FC=
+hardcode_minus_L_FC=no
+hardcode_automatic_FC=no
+inherit_rpath_FC=no
+module_cmds_FC=
+module_expsym_cmds_FC=
+link_all_deplibs_FC=unknown
+old_archive_cmds_FC=$old_archive_cmds
+reload_flag_FC=$reload_flag
+reload_cmds_FC=$reload_cmds
+no_undefined_flag_FC=
+whole_archive_flag_spec_FC=
+enable_shared_with_static_runtimes_FC=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+objext_FC=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  lt_save_CFLAGS=$CFLAGS
+  CC=${FC-"f95"}
+  CFLAGS=$FCFLAGS
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  compiler_FC=$CC
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+  if test -n "$compiler"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[4-9]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+    GCC_FC="$ac_cv_fc_compiler_gnu"
+    LD_FC="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    # Dependencies to place before and after the object being linked:
+predep_objects_FC=
+postdep_objects_FC=
+predeps_FC=
+postdeps_FC=
+compiler_lib_search_path_FC=
+
+cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case ${prev}${p} in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test "$pre_test_object_deps_done" = no; then
+	 case ${prev} in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_FC"; then
+	     compiler_lib_search_path_FC="${prev}${p}"
+	   else
+	     compiler_lib_search_path_FC="${compiler_lib_search_path_FC} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_FC"; then
+	   postdeps_FC="${prev}${p}"
+	 else
+	   postdeps_FC="${postdeps_FC} ${prev}${p}"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_FC"; then
+	   predep_objects_FC="$p"
+	 else
+	   predep_objects_FC="$predep_objects_FC $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_FC"; then
+	   postdep_objects_FC="$p"
+	 else
+	   postdep_objects_FC="$postdep_objects_FC $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling FC test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+
+
+case " $postdeps_FC " in
+*" -lc "*) archive_cmds_need_lc_FC=no ;;
+esac
+ compiler_lib_search_dirs_FC=
+if test -n "${compiler_lib_search_path_FC}"; then
+ compiler_lib_search_dirs_FC=`echo " ${compiler_lib_search_path_FC}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    lt_prog_compiler_wl_FC=
+lt_prog_compiler_pic_FC=
+lt_prog_compiler_static_FC=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl_FC='-Wl,'
+    lt_prog_compiler_static_FC='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_FC='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_FC='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_FC='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_FC='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_FC='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_FC=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_FC='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared_FC=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_FC='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_FC=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic_FC='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl_FC='-Xlinker '
+      if test -n "$lt_prog_compiler_pic_FC"; then
+        lt_prog_compiler_pic_FC="-Xcompiler $lt_prog_compiler_pic_FC"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_FC='-Bstatic'
+      else
+	lt_prog_compiler_static_FC='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic_FC='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic_FC='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static_FC='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static_FC='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='-KPIC'
+	lt_prog_compiler_static_FC='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='-fPIC'
+	lt_prog_compiler_static_FC='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='--shared'
+	lt_prog_compiler_static_FC='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl_FC='-Wl,-Wl,,'
+	lt_prog_compiler_pic_FC='-PIC'
+	lt_prog_compiler_static_FC='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='-fpic'
+	lt_prog_compiler_static_FC='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl_FC='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static_FC='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl_FC='-Wl,'
+	lt_prog_compiler_pic_FC='-qpic'
+	lt_prog_compiler_static_FC='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic_FC='-KPIC'
+	  lt_prog_compiler_static_FC='-Bstatic'
+	  lt_prog_compiler_wl_FC=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic_FC='-KPIC'
+	  lt_prog_compiler_static_FC='-Bstatic'
+	  lt_prog_compiler_wl_FC='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic_FC='-KPIC'
+	  lt_prog_compiler_static_FC='-Bstatic'
+	  lt_prog_compiler_wl_FC='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl_FC='-Wl,'
+	  lt_prog_compiler_pic_FC='-fPIC'
+	  lt_prog_compiler_static_FC='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl_FC='-Wl,'
+	  lt_prog_compiler_pic_FC='-fpic'
+	  lt_prog_compiler_static_FC='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic_FC='-KPIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_FC='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static_FC='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static_FC='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic_FC='-KPIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl_FC='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl_FC='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl_FC='-Qoption ld '
+      lt_prog_compiler_pic_FC='-PIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      lt_prog_compiler_pic_FC='-KPIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic_FC='-Kconform_pic'
+	lt_prog_compiler_static_FC='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      lt_prog_compiler_pic_FC='-KPIC'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl_FC='-Wl,'
+      lt_prog_compiler_can_build_shared_FC=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic_FC='-pic'
+      lt_prog_compiler_static_FC='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared_FC=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_FC=
+    ;;
+  *)
+    lt_prog_compiler_pic_FC="$lt_prog_compiler_pic_FC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_FC=$lt_prog_compiler_pic_FC
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_FC" >&5
+$as_echo "$lt_cv_prog_compiler_pic_FC" >&6; }
+lt_prog_compiler_pic_FC=$lt_cv_prog_compiler_pic_FC
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_FC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_FC works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_FC works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_FC=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_FC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_FC=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_FC" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_FC" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_FC" = xyes; then
+    case $lt_prog_compiler_pic_FC in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_FC=" $lt_prog_compiler_pic_FC" ;;
+     esac
+else
+    lt_prog_compiler_pic_FC=
+     lt_prog_compiler_can_build_shared_FC=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_FC eval lt_tmp_static_flag=\"$lt_prog_compiler_static_FC\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_FC=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_FC=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_FC=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_FC" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_FC" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_FC" = xyes; then
+    :
+else
+    lt_prog_compiler_static_FC=
+fi
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_FC=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_FC=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; }
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_FC=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_FC=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_FC" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_FC" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_FC" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag_FC=
+  always_export_symbols_FC=no
+  archive_cmds_FC=
+  archive_expsym_cmds_FC=
+  compiler_needs_object_FC=no
+  enable_shared_with_static_runtimes_FC=no
+  export_dynamic_flag_spec_FC=
+  export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic_FC=no
+  hardcode_direct_FC=no
+  hardcode_direct_absolute_FC=no
+  hardcode_libdir_flag_spec_FC=
+  hardcode_libdir_separator_FC=
+  hardcode_minus_L_FC=no
+  hardcode_shlibpath_var_FC=unsupported
+  inherit_rpath_FC=no
+  link_all_deplibs_FC=unknown
+  module_cmds_FC=
+  module_expsym_cmds_FC=
+  old_archive_from_new_cmds_FC=
+  old_archive_from_expsyms_cmds_FC=
+  thread_safe_flag_spec_FC=
+  whole_archive_flag_spec_FC=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms_FC=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms_FC='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs_FC=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec_FC='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec_FC="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec_FC=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs_FC=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_FC=''
+        ;;
+      m68k)
+            archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_FC='-L$libdir'
+            hardcode_minus_L_FC=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag_FC=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds_FC='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, FC) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      export_dynamic_flag_spec_FC='${wl}--export-all-symbols'
+      allow_undefined_flag_FC=unsupported
+      always_export_symbols_FC=no
+      enable_shared_with_static_runtimes_FC=yes
+      export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_FC='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs_FC=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct_FC=no
+      hardcode_shlibpath_var_FC=no
+      hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec_FC='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds_FC='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec_FC=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec_FC='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_FC=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec_FC='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object_FC=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds_FC='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec_FC='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+	  archive_cmds_FC='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds_FC='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs_FC=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_FC='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs_FC=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs_FC=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+	    archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs_FC=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds_FC='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs_FC" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec_FC=
+      export_dynamic_flag_spec_FC=
+      whole_archive_flag_spec_FC=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag_FC=unsupported
+      always_export_symbols_FC=yes
+      archive_expsym_cmds_FC='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L_FC=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct_FC=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds_FC='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds_FC='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds_FC=''
+      hardcode_direct_FC=yes
+      hardcode_direct_absolute_FC=yes
+      hardcode_libdir_separator_FC=':'
+      link_all_deplibs_FC=yes
+      file_list_spec_FC='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct_FC=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L_FC=yes
+	  hardcode_libdir_flag_spec_FC='-L$libdir'
+	  hardcode_libdir_separator_FC=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec_FC='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols_FC=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag_FC='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__FC"; then
+    lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__FC"; then
+    lt_cv_aix_libpath__FC="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__FC
+fi
+
+        hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds_FC='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec_FC='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag_FC="-z nodefs"
+	  archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__FC=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__FC"; then
+    lt_cv_aix_libpath__FC=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__FC"; then
+    lt_cv_aix_libpath__FC="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__FC
+fi
+
+	 hardcode_libdir_flag_spec_FC='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag_FC=' ${wl}-bernotok'
+	  allow_undefined_flag_FC=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec_FC='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec_FC='$convenience'
+	  fi
+	  archive_cmds_need_lc_FC=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds_FC="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds_FC=''
+        ;;
+      m68k)
+            archive_cmds_FC='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec_FC='-L$libdir'
+            hardcode_minus_L_FC=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec_FC=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec_FC=' '
+	allow_undefined_flag_FC=unsupported
+	always_export_symbols_FC=yes
+	file_list_spec_FC='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_FC='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds_FC='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, FC)='true'
+	enable_shared_with_static_runtimes_FC=yes
+	exclude_expsyms_FC='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds_FC='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds_FC='chmod 644 $oldlib'
+	postlink_cmds_FC='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec_FC=' '
+	allow_undefined_flag_FC=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds_FC='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds_FC='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds_FC='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes_FC=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_FC=no
+  hardcode_direct_FC=no
+  hardcode_automatic_FC=yes
+  hardcode_shlibpath_var_FC=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec_FC='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+    compiler_needs_object_FC=yes
+  else
+    whole_archive_flag_spec_FC=''
+  fi
+  link_all_deplibs_FC=yes
+  allow_undefined_flag_FC="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_FC="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_FC="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_FC="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_FC="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs_FC=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec_FC='-R$libdir'
+      hardcode_direct_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_FC=yes
+      hardcode_minus_L_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec_FC='-R$libdir'
+      hardcode_direct_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds_FC='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds_FC='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator_FC=:
+      hardcode_direct_FC=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L_FC=yes
+      export_dynamic_flag_spec_FC='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_FC='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_FC=:
+	hardcode_direct_FC=yes
+	hardcode_direct_absolute_FC=yes
+	export_dynamic_flag_spec_FC='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L_FC=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_FC='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_FC='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	archive_cmds_FC='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec_FC='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator_FC=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct_FC=no
+	  hardcode_shlibpath_var_FC=no
+	  ;;
+	*)
+	  hardcode_direct_FC=yes
+	  hardcode_direct_absolute_FC=yes
+	  export_dynamic_flag_spec_FC='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L_FC=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat > conftest.$ac_ext <<_ACEOF
+
+      subroutine foo
+      end
+_ACEOF
+if ac_fn_fc_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds_FC='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_FC='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc_FC='no'
+      hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_FC=:
+      inherit_rpath_FC=yes
+      link_all_deplibs_FC=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds_FC='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec_FC='-R$libdir'
+      hardcode_direct_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    newsos6)
+      archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct_FC=yes
+      hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_FC=:
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_FC=yes
+	hardcode_shlibpath_var_FC=no
+	hardcode_direct_absolute_FC=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_FC='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_FC='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_FC='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_FC='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_FC='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs_FC=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      hardcode_minus_L_FC=yes
+      allow_undefined_flag_FC=unsupported
+      archive_cmds_FC='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds_FC='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag_FC=' -expect_unresolved \*'
+	archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc_FC='no'
+      hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator_FC=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag_FC=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds_FC='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec_FC='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag_FC=' -expect_unresolved \*'
+	archive_cmds_FC='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds_FC='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec_FC='-rpath $libdir'
+      fi
+      archive_cmds_need_lc_FC='no'
+      hardcode_libdir_separator_FC=:
+      ;;
+
+    solaris*)
+      no_undefined_flag_FC=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds_FC='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds_FC='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds_FC='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_FC='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec_FC='-R$libdir'
+      hardcode_shlibpath_var_FC=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec_FC='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec_FC='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs_FC=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds_FC='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_FC='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      hardcode_direct_FC=yes
+      hardcode_minus_L_FC=yes
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_FC=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds_FC='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds_FC='$CC -r -o $output$reload_objs'
+	  hardcode_direct_FC=no
+        ;;
+	motorola)
+	  archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct_FC=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var_FC=no
+      export_dynamic_flag_spec_FC='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var_FC=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs_FC=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_FC='${wl}-z,text'
+      archive_cmds_need_lc_FC=no
+      hardcode_shlibpath_var_FC=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag_FC='${wl}-z,text'
+      allow_undefined_flag_FC='${wl}-z,nodefs'
+      archive_cmds_need_lc_FC=no
+      hardcode_shlibpath_var_FC=no
+      hardcode_libdir_flag_spec_FC='${wl}-R,$libdir'
+      hardcode_libdir_separator_FC=':'
+      link_all_deplibs_FC=yes
+      export_dynamic_flag_spec_FC='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds_FC='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds_FC='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds_FC='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds_FC='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec_FC='-L$libdir'
+      hardcode_shlibpath_var_FC=no
+      ;;
+
+    *)
+      ld_shlibs_FC=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec_FC='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_FC" >&5
+$as_echo "$ld_shlibs_FC" >&6; }
+test "$ld_shlibs_FC" = no && can_build_shared=no
+
+with_gnu_ld_FC=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_FC" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_FC=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_FC in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_FC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_FC
+	  pic_flag=$lt_prog_compiler_pic_FC
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_FC
+	  allow_undefined_flag_FC=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_FC 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_FC=no
+	  else
+	    lt_cv_archive_cmds_need_lc_FC=yes
+	  fi
+	  allow_undefined_flag_FC=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_FC" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_FC" >&6; }
+      archive_cmds_need_lc_FC=$lt_cv_archive_cmds_need_lc_FC
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_FC\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_FC\""
+    cat > conftest.$ac_ext <<_ACEOF
+      program main
+
+      end
+_ACEOF
+if ac_fn_fc_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_FC=
+if test -n "$hardcode_libdir_flag_spec_FC" ||
+   test -n "$runpath_var_FC" ||
+   test "X$hardcode_automatic_FC" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_FC" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, FC)" != no &&
+     test "$hardcode_minus_L_FC" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_FC=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_FC=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_FC=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_FC" >&5
+$as_echo "$hardcode_action_FC" >&6; }
+
+if test "$hardcode_action_FC" = relink ||
+   test "$inherit_rpath_FC" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by fcdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+fcdemo config.status 1.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_FC='`$ECHO "$LD_FC" | $SED "$delay_single_quote_subst"`'
+reload_flag_FC='`$ECHO "$reload_flag_FC" | $SED "$delay_single_quote_subst"`'
+reload_cmds_FC='`$ECHO "$reload_cmds_FC" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_FC='`$ECHO "$old_archive_cmds_FC" | $SED "$delay_single_quote_subst"`'
+compiler_FC='`$ECHO "$compiler_FC" | $SED "$delay_single_quote_subst"`'
+GCC_FC='`$ECHO "$GCC_FC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_FC='`$ECHO "$lt_prog_compiler_no_builtin_flag_FC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_FC='`$ECHO "$lt_prog_compiler_pic_FC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_FC='`$ECHO "$lt_prog_compiler_wl_FC" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_FC='`$ECHO "$lt_prog_compiler_static_FC" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_FC='`$ECHO "$lt_cv_prog_compiler_c_o_FC" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_FC='`$ECHO "$archive_cmds_need_lc_FC" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_FC='`$ECHO "$enable_shared_with_static_runtimes_FC" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_FC='`$ECHO "$export_dynamic_flag_spec_FC" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_FC='`$ECHO "$whole_archive_flag_spec_FC" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_FC='`$ECHO "$compiler_needs_object_FC" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_FC='`$ECHO "$old_archive_from_new_cmds_FC" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_FC='`$ECHO "$old_archive_from_expsyms_cmds_FC" | $SED "$delay_single_quote_subst"`'
+archive_cmds_FC='`$ECHO "$archive_cmds_FC" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_FC='`$ECHO "$archive_expsym_cmds_FC" | $SED "$delay_single_quote_subst"`'
+module_cmds_FC='`$ECHO "$module_cmds_FC" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_FC='`$ECHO "$module_expsym_cmds_FC" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_FC='`$ECHO "$with_gnu_ld_FC" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_FC='`$ECHO "$allow_undefined_flag_FC" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_FC='`$ECHO "$no_undefined_flag_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_FC='`$ECHO "$hardcode_libdir_flag_spec_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_FC='`$ECHO "$hardcode_libdir_separator_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_FC='`$ECHO "$hardcode_direct_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_FC='`$ECHO "$hardcode_direct_absolute_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_FC='`$ECHO "$hardcode_minus_L_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_FC='`$ECHO "$hardcode_shlibpath_var_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_FC='`$ECHO "$hardcode_automatic_FC" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_FC='`$ECHO "$inherit_rpath_FC" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_FC='`$ECHO "$link_all_deplibs_FC" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_FC='`$ECHO "$always_export_symbols_FC" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_FC='`$ECHO "$export_symbols_cmds_FC" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_FC='`$ECHO "$exclude_expsyms_FC" | $SED "$delay_single_quote_subst"`'
+include_expsyms_FC='`$ECHO "$include_expsyms_FC" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_FC='`$ECHO "$prelink_cmds_FC" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_FC='`$ECHO "$postlink_cmds_FC" | $SED "$delay_single_quote_subst"`'
+file_list_spec_FC='`$ECHO "$file_list_spec_FC" | $SED "$delay_single_quote_subst"`'
+hardcode_action_FC='`$ECHO "$hardcode_action_FC" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_FC='`$ECHO "$compiler_lib_search_dirs_FC" | $SED "$delay_single_quote_subst"`'
+predep_objects_FC='`$ECHO "$predep_objects_FC" | $SED "$delay_single_quote_subst"`'
+postdep_objects_FC='`$ECHO "$postdep_objects_FC" | $SED "$delay_single_quote_subst"`'
+predeps_FC='`$ECHO "$predeps_FC" | $SED "$delay_single_quote_subst"`'
+postdeps_FC='`$ECHO "$postdeps_FC" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_FC='`$ECHO "$compiler_lib_search_path_FC" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_FC \
+reload_flag_FC \
+compiler_FC \
+lt_prog_compiler_no_builtin_flag_FC \
+lt_prog_compiler_pic_FC \
+lt_prog_compiler_wl_FC \
+lt_prog_compiler_static_FC \
+lt_cv_prog_compiler_c_o_FC \
+export_dynamic_flag_spec_FC \
+whole_archive_flag_spec_FC \
+compiler_needs_object_FC \
+with_gnu_ld_FC \
+allow_undefined_flag_FC \
+no_undefined_flag_FC \
+hardcode_libdir_flag_spec_FC \
+hardcode_libdir_separator_FC \
+exclude_expsyms_FC \
+include_expsyms_FC \
+file_list_spec_FC \
+compiler_lib_search_dirs_FC \
+predep_objects_FC \
+postdep_objects_FC \
+predeps_FC \
+postdeps_FC \
+compiler_lib_search_path_FC; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+reload_cmds_FC \
+old_archive_cmds_FC \
+old_archive_from_new_cmds_FC \
+old_archive_from_expsyms_cmds_FC \
+archive_cmds_FC \
+archive_expsym_cmds_FC \
+module_cmds_FC \
+module_expsym_cmds_FC \
+export_symbols_cmds_FC \
+prelink_cmds_FC \
+postlink_cmds_FC; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h:config-h.in" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_tt"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+    } >"$ac_tmp/config.h" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$ac_tmp/config.h" "$ac_file" \
+	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error $? "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="FC "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: FC
+
+# The linker used to build libraries.
+LD=$lt_LD_FC
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_FC
+reload_cmds=$lt_reload_cmds_FC
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_FC
+
+# A language specific compiler.
+CC=$lt_compiler_FC
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_FC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_FC
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_FC
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_FC
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_FC
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_FC
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_FC
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_FC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_FC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_FC
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_FC
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_FC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_FC
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_FC
+archive_expsym_cmds=$lt_archive_expsym_cmds_FC
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_FC
+module_expsym_cmds=$lt_module_expsym_cmds_FC
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_FC
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_FC
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_FC
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_FC
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_FC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_FC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_FC
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_FC
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_FC
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_FC
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_FC
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_FC
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_FC
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_FC
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_FC
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_FC
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_FC
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_FC
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_FC
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_FC
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_FC
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_FC
+postdep_objects=$lt_postdep_objects_FC
+predeps=$lt_predeps_FC
+postdeps=$lt_postdeps_FC
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_FC
+
+# ### END LIBTOOL TAG CONFIG: FC
+_LT_EOF
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/tests/fcdemo/configure.ac b/tests/fcdemo/configure.ac
new file mode 100644
index 0000000..d718953
--- /dev/null
+++ b/tests/fcdemo/configure.ac
@@ -0,0 +1,78 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#   Copyright (C) 2001, 2003, 2005, 2007 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AC_PREREQ(2.54)
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([fcdemo], [1.0], [bug-libtool@gnu.org])
+AC_CONFIG_HEADERS([config.h:config-h.in])
+AC_CONFIG_SRCDIR([foof.f90])
+AC_CONFIG_AUX_DIR([../../libltdl/config])
+
+AC_ARG_WITH([dist], AS_HELP_STRING([--with-dist],
+				   [ignore errors not affecting `make dist']))
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+AC_PROG_CC
+
+## ------------------------ ##
+## Fortran compiler checks. ##
+## ------------------------ ##
+AC_LANG_PUSH([Fortran])
+AC_PROG_FC
+dnl When configuring for `make dist' purposes, skip checks that may yield fatal
+dnl errors when there is no working F90 compiler.
+if test -z "$with_dist"; then
+  dnl Check the flags needed to link fc programs with ld (i.e. cc)
+  AC_FC_LIBRARY_LDFLAGS
+  dnl Check for underscoring of external names
+  AC_FC_WRAPPERS
+  dnl We need to use .f90 and not .f to enable Automake FC support
+  dnl Some Intel ifc/ifort do not understand .f95.  :-/
+  AC_FC_SRCEXT([f90])
+  dnl Yes, we want free form Fortran!
+  AC_FC_FREEFORM
+fi
+AC_LANG_POP
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LT_INIT
+AC_SUBST([LIBTOOL_DEPS])
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/tests/fcdemo/cprogram.c b/tests/fcdemo/cprogram.c
new file mode 100644
index 0000000..39fa395
--- /dev/null
+++ b/tests/fcdemo/cprogram.c
@@ -0,0 +1,55 @@
+/* cprogram.c
+
+   Copyright (C) 2002, 2005, 2006 Free Software Foundation, Inc.
+   Written by Ralf Wildenhues, 2002
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+
+int
+main ()
+{
+  int arg,cres,fres;
+  
+  printf ("Welcome to GNU libtool mixed C/Fortran demo!\n");
+  
+  arg = 2;
+  
+  cres = csub (arg);
+  
+  printf ("The C subroutine returned, claiming that 2*%d = %d\n",arg,cres);
+  
+  if (cres == 2*arg)
+    printf ("The C subroutine is ok!\n");
+  
+  printf ("\nCalling the C wrapper routine...\n");
+  fres = fwrapper (arg);
+  
+  printf ("The C wrapper to the fortran subroutine returned,\n"
+	  "claiming that 2*%d = %d\n",arg,fres);
+  
+  if (fres == 2*arg)
+    printf ("The Fortran subroutine is ok!\n");
+  
+  return 0;
+}
+
diff --git a/tests/fcdemo/foo.h b/tests/fcdemo/foo.h
new file mode 100644
index 0000000..cf91d5a
--- /dev/null
+++ b/tests/fcdemo/foo.h
@@ -0,0 +1,56 @@
+/* foo.h -- interface to fortran and C libraries
+
+   Copyright (C) 1998-1999, 2005 Free Software Foundation, Inc.
+   Written by Eric Lindahl, 2002
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#ifndef _FOO_H_
+#define _FOO_H_ 1
+
+/* config.h is necessary for the fortran name mangling */
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+/* csub is an extremely useful subroutine that
+ * returns the argument multiplied by two :-)
+ */
+extern int csub(int);
+
+/* This routine performs the same action, but
+ * calls the fortran subroutine fsub to do the
+ * real work.
+ */
+extern int fwrapper(int);
+
+/* fsub does the same thing as csub, i.e. res=arg*2.
+ * Use autoconf macro for fortran function names.
+ * Note that fortran passes args by reference, so
+ * you need to provide pointers to your ints.
+ */
+extern
+#ifdef __cplusplus
+"C"
+#endif
+void FC_FUNC(fsub,FSUB)(int *arg, int *res);
+
+
+#endif
diff --git a/tests/fcdemo/fooc.c b/tests/fcdemo/fooc.c
new file mode 100644
index 0000000..68968ea
--- /dev/null
+++ b/tests/fcdemo/fooc.c
@@ -0,0 +1,41 @@
+/* fooc.c
+
+   Copyright (C) 2005, 2006, 2007 Free Software Foundation, Inc.
+   Written by Ralf Wildenhues, 2005
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+
+int csub (int arg)
+{
+  return 2*arg;
+}
+
+
+int fwrapper (int arg)
+{
+  int res;
+  printf("Calling the Fortran subroutine from the C wrapper...\n");
+  FC_FUNC(fsub,FSUB)(&arg,&res);
+  printf("Returned from the Fortran subroutine...\n");
+  return res;
+}
diff --git a/tests/fcdemo/foof.f90 b/tests/fcdemo/foof.f90
new file mode 100644
index 0000000..794dde9
--- /dev/null
+++ b/tests/fcdemo/foof.f90
@@ -0,0 +1,11 @@
+! 
+! This program is free software; you can redistribute it and/or
+! modify it under the terms of the GNU General Public License
+! as published by the Free Software Foundation; either version 2
+! of the License, or (at your option) any later version.
+! 
+subroutine fsub(arg,res)
+  write(*,*) 'fsub called'
+  call fsubf(arg,res)
+  return
+end
diff --git a/tests/fcdemo/foof2.f90 b/tests/fcdemo/foof2.f90
new file mode 100644
index 0000000..913868b
--- /dev/null
+++ b/tests/fcdemo/foof2.f90
@@ -0,0 +1,13 @@
+! 
+! This program is free software; you can redistribute it and/or
+! modify it under the terms of the GNU General Public License
+! as published by the Free Software Foundation; either version 2
+! of the License, or (at your option) any later version.
+! 
+subroutine fsubf(arg,res)
+  implicit none
+  integer arg,res
+  write(*,*) 'fsubf called'
+  res=arg*2
+  return
+end
diff --git a/tests/fcdemo/foof3.f90 b/tests/fcdemo/foof3.f90
new file mode 100644
index 0000000..922751b
--- /dev/null
+++ b/tests/fcdemo/foof3.f90
@@ -0,0 +1,13 @@
+! 
+! This program is free software; you can redistribute it and/or
+! modify it under the terms of the GNU General Public License
+! as published by the Free Software Foundation; either version 2
+! of the License, or (at your option) any later version.
+! 
+subroutine fsub3(arg,res)
+  implicit none
+  integer arg,res
+  write(*,*) 'fsub3 called'
+  res=arg*4
+  return
+end
diff --git a/tests/fcdemo/fprogram.f90 b/tests/fcdemo/fprogram.f90
new file mode 100644
index 0000000..dca35b8
--- /dev/null
+++ b/tests/fcdemo/fprogram.f90
@@ -0,0 +1,32 @@
+! 
+! This program is free software; you can redistribute it and/or
+! modify it under the terms of the GNU General Public License
+! as published by the Free Software Foundation; either version 2
+! of the License, or (at your option) any later version.
+! 
+program fprogram
+  implicit none
+  integer arg,res
+
+  write(*,*) 'Welcome to GNU libtool Fortran demo!'
+  write(*,*) 'Real programmers write in FORTRAN.'
+  arg=2
+
+  call fsub(arg,res)
+
+  write(*,*) 'fsub returned, saying that 2 *',arg,' =',res
+
+  if (res.eq.4) then
+     write(*,*) 'fsub is ok!'
+  endif
+
+  call fsub3(arg,res)
+
+  write(*,*) 'fsub3 returned, saying that 4 *',arg,' =',res
+
+  if (res.eq.8) then
+     write(*,*) 'fsub3 is ok!'
+  endif
+
+  stop
+end
diff --git a/tests/flags.at b/tests/flags.at
new file mode 100644
index 0000000..f865757
--- /dev/null
+++ b/tests/flags.at
@@ -0,0 +1,116 @@
+# flags.at -- libtool passing of flags             -*- Autotest -*-
+#
+#   Copyright (C) 2009, 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+m4_foreach([lt_tag], [CC, CXX, F77, FC, GCJ],
+[AT_SETUP([passing lt_tag flags through libtool])
+AT_KEYWORDS([libtool])
+LT_AT_TAG(m4_defn([lt_tag]))
+
+LDFLAGS="$LDFLAGS -no-undefined"
+eval "`$LIBTOOL --config | $EGREP '^(FGREP)='`"
+
+m4_case(lt_tag,
+[CC], [AT_DATA([a.c],
+[[int main () { return 0; }
+]])
+compile="$CC $CPPFLAGS $CFLAGS" link="$CC $CFLAGS $LDFLAGS" source=a.c
+],
+[CXX], [AT_DATA([a.cpp],
+[[int main () { return 0; }
+]])
+compile="$CXX $CPPFLAGS $CXXFLAGS" link="$CXX $CXXFLAGS $LDFLAGS" source=a.cpp
+],
+[F77], [AT_DATA([a.f],
+[[      program main
+      end
+]])
+compile="$F77 $FFLAGS" link="$F77 $FFLAGS $LDFLAGS" source=a.f
+],
+[FC], [AT_DATA([a.f90],
+[[      program main
+      end
+]])
+compile="$FC $FCFLAGS" link="$FC $FCFLAGS $LDFLAGS" source=a.f90
+],
+[GCJ], [AT_DATA([a.java],
+[[class a {}
+]])
+compile="$GCJ $GCJFLAGS" link="$GCJ $GCJFLAGS $LDFLAGS" source=a.java
+])
+
+# Linker flags are not passed to the archiver, so don't test static libraries.
+if $LIBTOOL --features | grep 'enable shared libraries'; then
+  library_and_module='library.la "module.la -module -avoid-version"'
+else
+  library_and_module=
+fi
+
+eval "`$LIBTOOL --tag=lt_tag --config | $EGREP '^(wl|archive_cmds)='`"
+
+AT_CHECK([$LIBTOOL --tag=lt_tag --mode=compile $compile -c $source],
+	 [], [ignore], [ignore])
+
+# Linker flags are prefixed with ${wl} iff they are passed to the
+# compiler driver, instead of directly to the linker.
+case $archive_cmds in
+*\$LD*\$linker_flags*) maybe_wl= compiler_flags_in_liblink=false ;;
+*) maybe_wl=$wl compiler_flags_in_liblink=: ;;
+esac
+
+for flag in -Wc, -Wl, '-Xcompiler ' '-Xlinker '; do
+  case $flag in
+  -Wc, | -Xcompiler\ )
+    AT_CHECK([$LIBTOOL -n --tag=lt_tag --mode=compile $compile ]dnl
+	     [$flag-foo -c $source], [], [stdout], [ignore])
+    AT_CHECK([$FGREP " -foo" stdout], [], [ignore])
+    flag_prefix_prog=
+    flag_prefix_lib=
+    flags_in_liblink=$compiler_flags_in_liblink
+    ;;
+  -Wl, | -Xlinker\ )
+    flag_prefix_prog=$wl
+    flag_prefix_lib=$maybe_wl
+    flags_in_liblink=:
+    ;;
+  esac
+
+  AT_CHECK([$LIBTOOL -n --tag=lt_tag --mode=link $link ]dnl
+	   [-o program$EXEEXT a.lo $flag-foo], [], [stdout], [ignore])
+  AT_CHECK([$FGREP " $flag_prefix_prog-foo" stdout], [], [ignore])
+
+  eval set x "$library_and_module"
+  for output
+  do
+    test x = "$output" && continue
+    AT_CHECK([$LIBTOOL -n --tag=lt_tag --mode=link $link ]dnl
+	     [-o $output a.lo -rpath /nowhere $flag-foo], [], [stdout], [ignore])
+    if $flags_in_liblink; then
+      AT_CHECK([$FGREP " $flag_prefix_lib-foo" stdout], [], [ignore])
+    else
+      AT_CHECK([$FGREP " $flag_prefix_lib-foo" stdout], [1])
+    fi
+  done
+done
+
+AT_CLEANUP
+])dnl m4_foreach(tag)
diff --git a/tests/getopt-m4sh.at b/tests/getopt-m4sh.at
new file mode 100644
index 0000000..75a7bf6
--- /dev/null
+++ b/tests/getopt-m4sh.at
@@ -0,0 +1,186 @@
+# getopts-m4sh.at -- test getopts.m4sh option parsers       -*- Autotest -*-
+#
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2010
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Shell option parser generator.])
+
+auxdir="$abs_top_srcdir/libltdl/config"
+
+
+# _LT_AT_GETOPT_M4SH_SETUP
+# ------------------------
+m4_define([_LT_AT_GETOPT_M4SH_SETUP],
+[m4_pattern_allow([AS_INIT])
+m4_pattern_allow([m4_include])
+AT_DATA([options.m4sh],
+[[AS_INIT[]m4_include([getopt.m4sh])
+nl='
+'
+list=
+opts=
+M4SH_GETOPTS(
+  [a!],	[--append],	[],	[func_append list "$optarg$nl"],
+  [f],	[--force],	[],	[opts="$opts force"],
+  [i],	[--install],	[],	[opts="$opts install"],
+  [v],	[--verbose],	[],	[opts="$opts verbose"],
+  [!],	[--ltdl],	[false],[opts="$opts ltdl=$optarg"],
+[echo "$list" $opts])
+]])
+m4_pattern_forbid([m4_include])
+m4_pattern_forbid([AS_INIT])
+AT_CHECK([$M4SH --version || exit 77], [], [ignore], [ignore])
+AT_CHECK([$M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options],
+	 [], [], [], [AT_CHECK([test $at_status -eq 63 && exit 77])])
+$SED "s,@LN_S\@,$LN_S,g;s,@SED\@,$SED,g" t-options > options
+])# _LT_AT_GETOPT_M4SH_SETUP
+
+
+# _LT_AT_FALLBACK_FUNC_EXTRACT(FUNC-NAME)
+# ---------------------------------------
+# Extract the fallback function FUNC-NAME from ltmain.m4sh
+m4_define([_LT_AT_FALLBACK_FUNC_EXTRACT],
+[dnl {{
+$SED '/^# func_dirname /q' options > options.tmp
+echo '# func_append var value' >> options.tmp
+$SED -n '/^$1 ()/,/^} # $1 /p' $abs_top_srcdir/libltdl/config/ltmain.m4sh >> options.tmp
+$SED '1,/^# func_dirname/d' options >> options.tmp
+rm -f options && mv options.tmp options])
+
+
+# _LT_AT_EXTENDED_SHELL_FUNC_EXTRACT(FUNC-NAME)
+# ---------------------------------------------
+# Extract the 'Extended-shell'-decorated function FUNC-NAME from libtool
+m4_define([_LT_AT_XSI_FUNC_EXTRACT],
+[dnl {{
+$SED '/^# $1/q' options > options.tmp
+$SED -n '/^$1 ()/,/^} # Extended-shell $1 /p' $abs_top_builddir/libtool >> options.tmp
+$SED '1,/^} # $1 /d' options >> options.tmp
+rm -f options && mv options.tmp options])
+
+
+## ----------------------- ##
+## Short option splitting. ##
+## ----------------------- ##
+
+AT_SETUP([short option splitting])
+
+AT_DATA(expout,
+[[ force verbose install
+]])
+
+_LT_AT_GETOPT_M4SH_SETUP
+
+AT_CHECK([$SHELL ./options -fvi], 0, [expout])
+
+AT_CLEANUP
+
+
+AT_SETUP([enhanced shell short option splitting])
+
+# Don't bother with additional XSI checks unless functions were substituted
+AT_CHECK([fgrep '@%:@ Extended-shell func_split_short_opt' $abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)])
+
+AT_DATA(expout,
+[[ force verbose install
+]])
+
+_LT_AT_GETOPT_M4SH_SETUP
+_LT_AT_XSI_FUNC_EXTRACT(func_split_short_opt)
+
+AT_CHECK([$SHELL ./options -fvi], 0, [expout])
+
+AT_CLEANUP
+
+
+## ---------------------- ##
+## Long option splitting. ##
+## ---------------------- ##
+
+AT_SETUP([long option splitting])
+
+AT_DATA(expout,
+[[ ltdl=long
+]])
+
+_LT_AT_GETOPT_M4SH_SETUP
+
+AT_CHECK([$SHELL ./options --ltdl=long], 0, [expout])
+
+AT_CLEANUP
+
+
+AT_SETUP([XSI long option splitting])
+
+# Don't bother with additional XSI checks unless functions were substituted
+AT_CHECK([fgrep '@%:@ Extended-shell func_split_long_opt' $abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)])
+
+AT_DATA(expout,
+[[ ltdl=long
+]])
+
+_LT_AT_GETOPT_M4SH_SETUP
+_LT_AT_XSI_FUNC_EXTRACT(func_split_long_opt)
+
+AT_CHECK([$SHELL ./options --ltdl=long], 0, [expout])
+
+AT_CLEANUP
+
+
+## ----------------- ##
+## Option appending. ##
+## ----------------- ##
+
+AT_SETUP([option appending])
+
+AT_DATA(expout,
+[[first   --append second
+third
+
+]])
+
+_LT_AT_GETOPT_M4SH_SETUP
+_LT_AT_FALLBACK_FUNC_EXTRACT(func_append)
+
+AT_CHECK([$SHELL ./options -a "first   --append second" -athird], 0, [expout])
+
+AT_CLEANUP
+
+
+AT_SETUP([enhanced shell option appending])
+
+# Don't bother with additional += check unless functions were substituted
+AT_CHECK([fgrep '@%:@ Extended-shell func_append ' $abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)])
+
+AT_DATA(expout,
+[[first   --append second
+third
+
+]])
+
+_LT_AT_GETOPT_M4SH_SETUP
+_LT_AT_FALLBACK_FUNC_EXTRACT(func_append)
+_LT_AT_XSI_FUNC_EXTRACT(func_append)
+
+AT_CHECK([$SHELL ./options -a "first   --append second" -athird], 0, [expout])
+
+AT_CLEANUP
diff --git a/tests/help.at b/tests/help.at
new file mode 100644
index 0000000..0b60a0d
--- /dev/null
+++ b/tests/help.at
@@ -0,0 +1,191 @@
+# help.at -- standard command line options          -*- Autotest -*-
+#
+#   Copyright (C) 2009, 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Testing libtool functions.])
+
+AT_SETUP([standard command line options])
+AT_KEYWORDS([libtool])
+AT_KEYWORDS([libtoolize])
+
+AT_CHECK([$LIBTOOLIZE --help], [], [ignore])
+AT_CHECK([$LIBTOOLIZE --version], [], [stdout])
+AT_CHECK([grep 'Copyright.*Free Software Foundation' stdout], [], [ignore])
+AT_CHECK([$LIBTOOL --help], [], [ignore])
+AT_CHECK([$LIBTOOL --help-all], [], [ignore])
+AT_CHECK([$LIBTOOL --version], [], [stdout])
+AT_CHECK([grep 'Copyright.*Free Software Foundation' stdout], [], [ignore])
+
+AT_CHECK([$LIBTOOL], [1], [ignore], [stderr])
+AT_CHECK([grep 'specify a MODE' stderr], [], [ignore])
+AT_CHECK([grep ' --help' stderr], [], [ignore])
+
+AT_CLEANUP
+
+
+AT_SETUP([mode short-hands])
+
+AT_DATA([a.c],
+[[int a () { return 0; }
+]])
+
+AT_DATA([main.c],
+[[extern int a ();
+int main () { return a (); }
+]])
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+mkdir $inst $libdir $bindir
+
+AT_CHECK([$LIBTOOL compile $CC $CPPFLAGS $CFLAGS -c a.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL co $CC $CPPFLAGS $CFLAGS -c main.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL co $CC $CPPFLAGS $CFLAGS -c main.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL link $CC $CFLAGS $LDFLAGS -o liba.la a.lo ]dnl
+	 [-no-undefined -rpath $libdir], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL l $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.lo ]dnl
+	 [liba.la], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL execute --dry-run ./main$EXEEXT],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL exe --dry-run ./main$EXEEXT],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL e --dry-run ./main$EXEEXT],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL install cp liba.la $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL i cp main$EXEEXT $bindir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL finish $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL f $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL uninstall rm -f $libdir/liba.la],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL u rm -f $bindir/main$EXEEXT],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL clean rm -f main$EXEEXT],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL cl liba.la],
+	 [], [ignore], [ignore])
+
+AT_CLEANUP
+
+
+AT_SETUP([debug tracing])
+
+AT_DATA([a.c],
+[[int a () { return 0; }
+]])
+
+AT_DATA([b.c],
+[[extern int a ();
+int b () { return a (); }
+]])
+
+AT_DATA([main.c],
+[[extern int b ();
+int main () { return b (); }
+]])
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+mkdir $inst $libdir $bindir
+
+# This test will not work correctly if --debug is passed.
+AT_CHECK([case "$LIBTOOL $CC $CPPFLAGS $CFLAGS $LDFLAGS " in ]dnl
+	 [  *\ --debug\ *) exit 77;; *) :;; esac])
+
+check_trace ()
+{
+  if test "X$trace" = X--debug; then
+    AT_CHECK([grep 'enabling shell trace mode' stdout stderr], [0], [ignore])
+    AT_CHECK([grep ' --mode' stderr], [0], [ignore])
+  else
+    AT_CHECK([grep 'enabling shell trace mode' stdout stderr], [1])
+    AT_CHECK([grep ' --mode' stderr], [1])
+  fi
+}
+
+orig_LIBTOOL=$LIBTOOL
+for trace in '' --debug; do
+  LIBTOOL="$orig_LIBTOOL $trace"
+
+  # Hypothesis: debug output should happen if (and only if) --debug is
+  # passed, for compile, link, install, uninstall, and clean modes.
+  AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c],
+	   [], [stdout], [stderr])
+  check_trace
+  AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c b.c],
+	   [], [stdout], [stderr])
+  check_trace
+  AT_CHECK([$CC $CPPFLAGS $CFLAGS -c main.c], [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo ]dnl
+	   [ -no-undefined -rpath $libdir], [], [stdout], [stderr])
+  check_trace
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la b.lo ]dnl
+	   [ -no-undefined -rpath $libdir liba.la], [], [stdout], [stderr])
+  check_trace
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ]dnl
+	   [libb.la], [], [stdout], [stderr])
+  check_trace
+  LT_AT_NOINST_EXEC_CHECK([./main], [], [], [stdout], [stderr])
+  check_trace
+
+  AT_CHECK([$LIBTOOL --mode=install cp liba.la libb.la $libdir],
+	   [], [stdout], [stderr])
+  check_trace
+
+  # Hypothesis: --debug should be passed to relink mode if (and only if)
+  # it was passed at link mode.
+  AT_CHECK([$orig_LIBTOOL --mode=install $lt_INSTALL liba.la libb.la $libdir],
+	   [], [stdout], [stderr])
+  if grep ': relinking ' stdout stderr; then
+    if test "X$trace" = X--debug; then
+      AT_CHECK([grep ' --mode=relink' stdout stderr | grep ' --debug '],
+	       [0], [ignore])
+    else
+      AT_CHECK([grep ' --mode=relink' stdout stderr | grep ' --debug '],
+	       [1])
+    fi
+  fi
+
+  AT_CHECK([$LIBTOOL --mode=install cp main$EXEEXT $bindir],
+	   [], [stdout], [stderr])
+  check_trace
+  AT_CHECK([$LIBTOOL --mode=finish $bindir], [], [stdout], [stderr])
+  check_trace
+
+  AT_CHECK([$LIBTOOL --mode=uninstall rm -f $bindir/main$EXEEXT ]dnl
+	   [$libdir/libb.la $libdir/liba.la], [], [stdout], [stderr])
+  check_trace
+  AT_CHECK([$LIBTOOL --mode=clean rm -f $bindir/main$EXEEXT ]dnl
+	   [$libdir/libb.la $libdir/liba.la], [], [stdout], [stderr])
+  check_trace
+
+done
+
+AT_CLEANUP
diff --git a/tests/indirect_deps.at b/tests/indirect_deps.at
new file mode 100644
index 0000000..7665dc5
--- /dev/null
+++ b/tests/indirect_deps.at
@@ -0,0 +1,117 @@
+# indirect_deps.at -- support for link_all_deplibs=no   -*- Autotest -*-
+
+#   Copyright (C) 2007, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2007.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([indirect convenience])
+AT_KEYWORDS([libtool])
+
+AT_DATA([a.c], [[
+#include <math.h>
+int a () { return 0; }
+double ad (double x) { return sin (x); }
+]])
+AT_DATA([b.c], [[
+extern int a ();
+extern double ad (double);
+int b () { return a () + (int) ad (0.0); }
+]])
+AT_DATA([c.c], [[
+extern int b ();
+int c () { return b (); }
+]])
+AT_DATA([m.c], [[
+extern int c ();
+int main () { return c (); }
+]])
+
+LDFLAGS="$LDFLAGS -no-undefined"
+for file in a.c b.c c.c; do
+  $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c $file
+done
+$CC $CPPFLAGS $CFLAGS -c m.c
+
+# liba is an indirect dependency of libd and of libconv.
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath /nowhere -lm
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libb.la b.lo liba.la -rpath /nowhere
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libconv.la c.lo libb.la
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libd.la libconv.la -rpath /nowhere
+
+for st in '' -static; do
+  AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m1$EXEEXT m.$OBJEXT libd.la],
+	   [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m2$EXEEXT m.$OBJEXT libconv.la],
+	   [], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([./m1])
+  LT_AT_EXEC_CHECK([./m2])
+done
+
+AT_CLEANUP
+
+
+AT_SETUP([indirect uninstalled])
+AT_KEYWORDS([libtool])
+
+AT_DATA([a.c], [[
+int a () { return 0; }
+]])
+AT_DATA([b.c], [[
+extern int a ();
+int b () { return a (); }
+]])
+AT_DATA([c.c], [[
+extern int b ();
+int c () { return b (); }
+]])
+
+AT_DATA([m1.c], [[
+extern int b ();
+int main () { return b (); }
+]])
+AT_DATA([m2.c], [[
+extern int c ();
+int main () { return c (); }
+]])
+
+mkdir a b c
+LDFLAGS="$LDFLAGS -no-undefined"
+for file in a.c b.c c.c; do
+  $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c $file
+done
+for file in m1.c m2.c; do
+  $CC $CPPFLAGS $CFLAGS -c $file
+done
+
+for st in '' -static; do
+  $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o a/liba.la a.lo -rpath /nowherea
+  $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o b/libb.la b.lo a/liba.la -rpath /nowhereb
+  $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o c/libcee.la c.lo b/libb.la -rpath /nowherec
+
+  AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m1$EXEEXT m1.$OBJEXT b/libb.la],
+	   [], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m2$EXEEXT m2.$OBJEXT c/libcee.la],
+	   [], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([./m1])
+  LT_AT_EXEC_CHECK([./m2])
+done
+
+AT_CLEANUP
diff --git a/tests/infer-tag.at b/tests/infer-tag.at
new file mode 100644
index 0000000..57dd728
--- /dev/null
+++ b/tests/infer-tag.at
@@ -0,0 +1,97 @@
+# infer-tag.at -- libtool without --tag             -*- Autotest -*-
+#
+#   Copyright (C) 2008, 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Check that func_infer_tag works.
+
+# We add one test per tag, so that only those tests are skipped
+# for which the tags are disabled (otherwise we only ever test
+# on systems where all tags are enabled).
+
+AT_SETUP([inferred tag])
+AT_KEYWORDS([libtool])
+
+AT_DATA([a.c],
+[[int a (void) { return 0; }
+]])
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c],
+	 [], [ignore], [ignore])
+
+AT_CLEANUP
+
+AT_SETUP([CXX inferred tag])
+LT_AT_TAG([CXX])
+AT_KEYWORDS([libtool])
+
+AT_DATA([a.cpp],
+[[int a (void) { return 0; }
+]])
+
+AT_CHECK([$LIBTOOL --mode=compile $CXX $CPPFLAGS $CXXFLAGS -c a.cpp],
+	 [], [ignore], [ignore])
+
+AT_CLEANUP
+
+AT_SETUP([F77 inferred tag])
+LT_AT_TAG([F77])
+AT_KEYWORDS([libtool])
+
+AT_DATA([a.f],
+[[      program main
+      end
+]])
+
+AT_CHECK([$LIBTOOL --mode=compile $F77 $FFLAGS -c a.f],
+	 [], [ignore], [ignore])
+
+AT_CLEANUP
+
+AT_SETUP([FC inferred tag])
+LT_AT_TAG([FC])
+AT_KEYWORDS([libtool])
+
+AT_DATA([a.f],
+[[      program main
+      end
+]])
+
+AT_CHECK([$LIBTOOL --mode=compile $FC $FCFLAGS -c a.f],
+	 [], [ignore], [ignore])
+
+AT_CLEANUP
+
+AT_SETUP([GCJ inferred tag])
+LT_AT_TAG([GCJ])
+AT_KEYWORDS([libtool])
+
+AT_DATA([A.java],
+[[public class A {
+  private int a;
+  public A () { a = 0; }
+};
+]])
+
+AT_CHECK([$LIBTOOL --mode=compile $GCJ $GCJCFLAGS -c A.java],
+	 [], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/inherited_flags.at b/tests/inherited_flags.at
new file mode 100644
index 0000000..65c0c3e
--- /dev/null
+++ b/tests/inherited_flags.at
@@ -0,0 +1,113 @@
+# inherited_flags.at -- test inherited_linker_flags          -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Peter O'Garman, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AT_SETUP([inherited_linker_flags])
+AT_KEYWORDS([libtool])
+
+AT_DATA([foo.c],
+[
+int foo() { return 1;}
+])
+
+AT_DATA([bar.c],
+[
+int bar() { return 1;}
+])
+
+AT_DATA([baz.c],
+[
+int baz() { return 1;}
+])
+
+AT_DATA([both.c],
+[
+int both() { return 1;}
+])
+
+AT_DATA([main.c],
+[
+int main() { return 0;}
+])
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o foo.lo foo.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o bar.lo bar.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o baz.lo baz.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o both.lo both.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o main.lo main.c
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libfoo.la foo.lo -rpath /nonexistent -no-undefined
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbar.la bar.lo -rpath /nonexistent -no-undefined
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libboth.la both.lo -rpath /nonexistent -no-undefined
+
+
+mv libfoo.la libfoo.la.bak
+sed -e 's/^inherited_linker_flags.*/inherited_linker_flags=-llt_inlikely_existing_lib/g' < libfoo.la.bak > libfoo.la
+rm libfoo.la.bak
+
+mv libbar.la libbar.la.bak
+sed -e 's/^inherited_linker_flags.*/inherited_linker_flags=-llt_unlikely_existing_lib/g' < libbar.la.bak > libbar.la
+rm libbar.la.bak
+
+mv libboth.la libboth.la.bak
+sed -e "s/^inherited_linker_flags.*/inherited_linker_flags='-llt_inlikely_existing_lib -llt_unlikely_existing_lib'/g" < libboth.la.bak > libboth.la
+rm libboth.la.bak
+
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbaz.la baz.lo -no-undefined -rpath /nonexistent ./libfoo.la ./libbar.la],
+	 [ignore],[stdout],[ignore])
+# We used to grep for
+# 'llt_[[ui]]nlikely_existing_lib.*llt_[[ui]]nlikely_existing_lib'
+# here.  This fails on win32/MSVC because the generated command lines have a
+# different syntax.  So drop the first `l'.
+AT_CHECK([$LIBTOOL --features | grep 'disable shared libraries' && (exit 77)], [1], [ignore])
+AT_CHECK([grep 'lt_[[ui]]nlikely_existing_lib.*lt_[[ui]]nlikely_existing_lib' stdout],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.lo -no-undefined -rpath /nonexistent  ./libfoo.la ./libbar.la],
+	[ignore],[stdout],[ignore])
+AT_CHECK([grep 'lt_[[ui]]nlikely_existing_lib.*lt_[[ui]]nlikely_existing_lib' stdout],
+	 [0],[ignore],[ignore])
+
+# now check for duplicates
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbaz.la baz.lo -no-undefined -rpath /nonexistent ./libfoo.la ./libbar.la ./libboth.la],
+	 [ignore],[stdout],[ignore])
+AT_CHECK([grep 'lt_inlikely_existing_lib.*lt_inlikely_existing_lib' stdout],
+	 [1],[ignore],[ignore])
+AT_CHECK([grep 'lt_unlikely_existing_lib.*lt_unlikely_existing_lib' stdout],
+	 [1],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.lo -no-undefined -rpath /nonexistent  ./libfoo.la ./libbar.la ./libboth.la],
+	[ignore],[stdout],[ignore])
+AT_CHECK([grep 'lt_inlikely_existing_lib.*lt_inlikely_existing_lib' stdout],
+	 [1],[ignore],[ignore])
+AT_CHECK([grep 'lt_unlikely_existing_lib.*lt_unlikely_existing_lib' stdout],
+	 [1],[ignore],[ignore])
+
+mv libboth.la libboth.la.bak
+sed "s/^inherited_linker_flags.*/inherited_linker_flags='-framework Cocoa -framework ApplicationServices'/" < libboth.la.bak > libboth.la
+rm libboth.la.bak
+
+AT_CHECK([$LIBTOOL -n --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -framework Cocoa -framework ApplicationServices -o libbaz.la baz.lo libboth.la -no-undefined -rpath /nonexistent],
+	 [], [stdout], [ignore])
+AT_CHECK([grep Cocoa.ltframework stdout], [1], [], [])
+AT_CHECK([grep ' -framework Cocoa' stdout], [0], [ignore], [])
+
+AT_CLEANUP
diff --git a/tests/install.at b/tests/install.at
new file mode 100644
index 0000000..5e15555
--- /dev/null
+++ b/tests/install.at
@@ -0,0 +1,52 @@
+# install.at -- install mode tests             -*- Autotest -*-
+#
+#   Copyright (C) 2008, 2009 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2008
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([Install tests])
+AT_KEYWORDS([libtool])
+
+# Ensure that install_override_mode overrides the mode of the shared
+# library (and only the shared library).
+
+AT_CHECK([$LIBTOOL --features | grep 'enable shared libraries' || exit 77],
+	 [], [ignore])
+sed 's,^\(install_override_mode\)=.*,\1=755,' < $LIBTOOL > ./libtool
+LIBTOOL=./libtool
+chmod a+rx $LIBTOOL
+
+inst=`pwd`/inst
+mkdir inst
+
+echo 'int a () { return 0; }' > a.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo ]dnl
+	 [-rpath $inst -no-undefined], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install $lt_INSTALL liba.la $inst],
+	 [], [stdout], [ignore])
+AT_CHECK([grep ' -m 755' stdout], [], [ignore])
+AT_CHECK([$LIBTOOL --mode=install $lt_INSTALL -m 644 liba.la $inst],
+	 [], [stdout], [ignore])
+AT_CHECK([grep ' -m 755' stdout], [], [ignore])
+AT_CHECK([grep ' -m 644.*liba.la' stdout], [], [ignore])
+
+AT_CLEANUP
diff --git a/tests/lalib-syntax.at b/tests/lalib-syntax.at
new file mode 100644
index 0000000..0f78ca8
--- /dev/null
+++ b/tests/lalib-syntax.at
@@ -0,0 +1,137 @@
+# lalib-syntax.at -- parsing .la files robustly  -*- Autotest -*-
+#
+#   Copyright (C) 2009, 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([syntax of .la files])
+AT_KEYWORDS([libtool])
+AT_KEYWORDS([libltdl])
+
+AT_XFAIL_IF([:]) dnl libltdl does not consistently return non-NULL lt_dlerror
+
+AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+#include <assert.h>
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle plugin_handle;
+
+  if (argc < 2)
+    {
+      fprintf (stderr, "usage: %s plugin\n", argv[0]);
+      return 1;
+    }
+
+  lt_dlinit ();
+  plugin_handle = lt_dlopenext (argv[1]);
+  if (NULL != plugin_handle)
+    {
+      printf ("plugin opened successfully!\n");
+      lt_dlclose (plugin_handle);
+    }
+  else
+    {
+      const char *error = lt_dlerror ();
+      assert (error != NULL);
+      printf ("plugin failed to open: %s\n", error);
+      err = 1;
+    }
+  lt_dlexit ();
+  return err;
+}
+]])
+
+AT_DATA([module.c],
+[[int foo (void) { return 0; }
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+CPPFLAGS="$CPPFLAGS $LTDLINCL"
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c main.c], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c module.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o module.la module.lo ]dnl
+	 [-module -avoid-version -rpath /somewhere], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main main.$OBJEXT $LIBLTDL],
+	 [], [ignore], [ignore])
+
+
+# Several bogus test cases.
+
+AT_DATA([missing-closing-quote.la],
+[[# missing-closing-quote.la - a libtool library file
+# Generated by libtool
+dlname='module.so
+library_names='module.so module.so module.so'
+old_library='module.a'
+installed=no
+shouldnotlink=yes
+libdir='/somewhere'
+]])
+
+AT_DATA([wrong-quotes.la],
+[[# wrong-quotes.la - a libtool library file
+# Generated by libtool
+dlname="module.so"
+library_names='module.so module.so module.so'
+old_library='module.a'
+installed=no
+shouldnotlink=yes
+libdir='/somewhere'
+]])
+
+AT_DATA([no-dlname.la],
+[[# no-dlname.la - a libtool library file
+# Generated by libtool
+installed=no
+shouldnotlink=yes
+libdir='/somewhere'
+]])
+
+AT_DATA([nonexistent-dlname.la],
+[[# nonexistent-dlname.la - a libtool library file
+# Generated by libtool
+dlname='does-not-exist.so'
+installed=no
+shouldnotlink=yes
+libdir='/somewhere'
+]])
+
+for file in ./missing-closing-quote.la ./wrong-quotes.la \
+	    ./no-dlname.la ./nonexistent-dlname.la; do
+  LT_AT_EXEC_CHECK([./main], [1], [stdout], [ignore], [$file])
+  AT_CHECK([grep 'plugin failed to open' stdout], [], [ignore])
+done
+
+AT_CLEANUP
diff --git a/tests/libtoolize.at b/tests/libtoolize.at
new file mode 100644
index 0000000..541753b
--- /dev/null
+++ b/tests/libtoolize.at
@@ -0,0 +1,1017 @@
+# libtoolize.at -- test libtoolize operation                  -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AT_BANNER([Libtoolize operation.])
+
+# _LT_CONFIGURE_AC
+# ----------------
+m4_define([_LT_CONFIGURE_AC],
+[AT_DATA([configure.ac],
+[[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_OUTPUT
+]])
+])# _LT_CONFIGURE_AC
+
+# _LT_LIBTOOLIZE_SETUP
+# --------------------
+m4_define([_LT_LIBTOOLIZE_SETUP],
+[_LT_CONFIGURE_AC
+
+test -d m4 || { rm -f m4 && mkdir m4; }
+
+rm -f m4/libtool.m4 m4/ltoptions.m4 build-aux/ltmain.sh
+
+AT_DATA([Makefile.am],
+[[ACLOCAL_AMFLAGS = -I m4
+]])
+
+# This file should be upgraded.
+AT_DATA([m4/libtool.m4], [[
+# serial 25 LT_INIT
+]])
+
+# This file has a very high serial number, and should be left unchanged
+# until --force is passed.
+AT_DATA([m4/ltoptions.m4], [[
+# serial 99999 ltoptions.m4
+]])
+
+test -d build-aux || { rm -f build-aux && mkdir build-aux; }
+
+# This file has a very high serial number, and needs --force to be updated.
+AT_DATA([build-aux/ltmain.sh], [[
+package_revision=9999.9999
+]])
+
+# This file has a very old serial number, but should be left unchanged
+# unless the --install flag is invoked.
+AT_DATA([build-aux/config.guess], [[
+timestamp='1970-01-01'
+]])
+])# LT_LIBTOOLIZE_SETUP
+
+
+## ------------------- ##
+## Macro installation. ##
+## ------------------- ##
+
+AT_SETUP([libtoolize macro installation])
+
+_LT_CONFIGURE_AC
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout)
+
+AT_CLEANUP
+
+
+## ------------------------- ##
+## ACLOCAL_AMFLAGS mismatch. ##
+## ------------------------- ##
+
+AT_SETUP([libtoolize macro directory mismatch error])
+
+_LT_CONFIGURE_AC
+
+AT_DATA([Makefile.am],
+[[ACLOCAL_AMFLAGS = -I me2
+]])
+
+AT_DATA(experr,
+[[libtoolize: AC_CONFIG_MACRO_DIR([m4]) conflicts with ACLOCAL_AMFLAGS=-I me2.
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 1, [ignore], experr)
+
+AT_CLEANUP
+
+## -------------- ##
+## Serial update. ##
+## -------------- ##
+
+AT_SETUP([libtoolize macro serial update])
+
+_LT_LIBTOOLIZE_SETUP
+
+
+
+## -------------------------------------------------------------------- ##
+## First we try to update with some newer files in the destination dir. ##
+## -------------------------------------------------------------------- ##
+
+AT_DATA(expout,
+[[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+]])
+
+AT_DATA(experr,
+[[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite
+libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout, experr)
+
+
+## ---------------------------------------------------------- ##
+## Next, a second update attempt with everything now updated. ##
+## ---------------------------------------------------------- ##
+
+: >expout
+
+AT_DATA(experr,
+[[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite
+libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout, experr)
+
+
+## ----------------------------------------------------------- ##
+## Now, a forced update to downgrade files with newer serials. ##
+## ----------------------------------------------------------- ##
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --force], 0, expout)
+
+
+## ---------------------------------------------------------------- ##
+## A final update attempt with everything previously force updated. ##
+## ---------------------------------------------------------------- ##
+
+: >expout
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout)
+
+AT_CLEANUP
+
+
+## --------------- ##
+## --install flag. ##
+## --------------- ##
+
+AT_SETUP([libtoolize config files serial update])
+
+_LT_LIBTOOLIZE_SETUP
+
+
+
+## -------------------------------------------------------------------- ##
+## First we try to update with some newer files in the destination dir. ##
+## -------------------------------------------------------------------- ##
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+]])
+
+AT_DATA(experr,
+[[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite
+libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout, experr)
+
+
+## ---------------------------------------------------------- ##
+## Next, a second update attempt with everything now updated. ##
+## ---------------------------------------------------------- ##
+
+: >expout
+
+AT_DATA(experr,
+[[libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite
+libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout, experr)
+
+
+## ----------------------------------------------------------- ##
+## Now, a forced update to downgrade files with newer serials. ##
+## ----------------------------------------------------------- ##
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --force --install], 0, expout)
+
+
+## ---------------------------------------------------------------- ##
+## A final update attempt with everything previously force updated. ##
+## ---------------------------------------------------------------- ##
+
+: >expout
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout)
+
+AT_CLEANUP
+
+
+## ----------------------------------------------------------------- ##
+## Ensure libtoolize works when LT_CONFIG_LTDL_DIR is not specified. ##
+## ----------------------------------------------------------------- ##
+
+AT_SETUP([diagnose missing LT_CONFIG_LTDL_DIR])
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/argz.m4'
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltdl.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in `ltdl'.
+libtoolize: copying file `ltdl/COPYING.LIB'
+libtoolize: copying file `ltdl/README'
+libtoolize: copying file `ltdl/argz_.h'
+libtoolize: copying file `ltdl/argz.c'
+libtoolize: copying file `ltdl/loaders/dld_link.c'
+libtoolize: copying file `ltdl/loaders/dlopen.c'
+libtoolize: copying file `ltdl/loaders/dyld.c'
+libtoolize: copying file `ltdl/loaders/load_add_on.c'
+libtoolize: copying file `ltdl/loaders/loadlibrary.c'
+libtoolize: copying file `ltdl/loaders/shl_load.c'
+libtoolize: copying file `ltdl/lt__dirent.c'
+libtoolize: copying file `ltdl/lt__strl.c'
+libtoolize: copying file `ltdl/libltdl/lt__alloc.h'
+libtoolize: copying file `ltdl/libltdl/lt__dirent.h'
+libtoolize: copying file `ltdl/libltdl/lt__glibc.h'
+libtoolize: copying file `ltdl/libltdl/lt__private.h'
+libtoolize: copying file `ltdl/libltdl/lt__strl.h'
+libtoolize: copying file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: copying file `ltdl/libltdl/lt_error.h'
+libtoolize: copying file `ltdl/libltdl/lt_system.h'
+libtoolize: copying file `ltdl/libltdl/slist.h'
+libtoolize: copying file `ltdl/loaders/preopen.c'
+libtoolize: copying file `ltdl/lt__alloc.c'
+libtoolize: copying file `ltdl/lt_dlloader.c'
+libtoolize: copying file `ltdl/lt_error.c'
+libtoolize: copying file `ltdl/ltdl.c'
+libtoolize: copying file `ltdl/ltdl.h'
+libtoolize: copying file `ltdl/slist.c'
+libtoolize: creating file `ltdl/Makefile.inc'
+libtoolize: Remember to add `LT_CONFIG_LTDL_DIR([ltdl])' to `configure.ac'.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+]])
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+LTDL_INIT([nonrecursive])
+AC_OUTPUT
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --install --ltdl=ltdl], 0, expout)
+
+AT_CLEANUP
+
+
+## ---------------------------- ##
+## Make sure ltdl.m4 is copied. ##
+## ---------------------------- ##
+
+# _LT_AT_LTDL_SETUP
+# -----------------
+# Macro to generate data files common to several tests.
+m4_pushdef([_LT_AT_LTDL_SETUP],
+[AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `ltdl/config'.
+libtoolize: linking file `ltdl/config/compile'
+libtoolize: linking file `ltdl/config/config.guess'
+libtoolize: linking file `ltdl/config/config.sub'
+libtoolize: linking file `ltdl/config/depcomp'
+libtoolize: linking file `ltdl/config/install-sh'
+libtoolize: linking file `ltdl/config/missing'
+libtoolize: linking file `ltdl/config/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'.
+libtoolize: linking file `ltdl/m4/argz.m4'
+libtoolize: linking file `ltdl/m4/libtool.m4'
+libtoolize: linking file `ltdl/m4/ltdl.m4'
+libtoolize: linking file `ltdl/m4/ltoptions.m4'
+libtoolize: linking file `ltdl/m4/ltsugar.m4'
+libtoolize: linking file `ltdl/m4/ltversion.m4'
+libtoolize: linking file `ltdl/m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'.
+libtoolize: linking file `ltdl/COPYING.LIB'
+libtoolize: linking file `ltdl/README'
+libtoolize: linking file `ltdl/Makefile.am'
+libtoolize: linking file `ltdl/configure.ac'
+libtoolize: copying file `ltdl/aclocal.m4'
+libtoolize: linking file `ltdl/Makefile.in'
+libtoolize: linking file `ltdl/config-h.in'
+libtoolize: linking file `ltdl/configure'
+libtoolize: linking file `ltdl/argz_.h'
+libtoolize: linking file `ltdl/argz.c'
+libtoolize: linking file `ltdl/loaders/dld_link.c'
+libtoolize: linking file `ltdl/loaders/dlopen.c'
+libtoolize: linking file `ltdl/loaders/dyld.c'
+libtoolize: linking file `ltdl/loaders/load_add_on.c'
+libtoolize: linking file `ltdl/loaders/loadlibrary.c'
+libtoolize: linking file `ltdl/loaders/shl_load.c'
+libtoolize: linking file `ltdl/lt__dirent.c'
+libtoolize: linking file `ltdl/lt__strl.c'
+libtoolize: linking file `ltdl/libltdl/lt__alloc.h'
+libtoolize: linking file `ltdl/libltdl/lt__dirent.h'
+libtoolize: linking file `ltdl/libltdl/lt__glibc.h'
+libtoolize: linking file `ltdl/libltdl/lt__private.h'
+libtoolize: linking file `ltdl/libltdl/lt__strl.h'
+libtoolize: linking file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: linking file `ltdl/libltdl/lt_error.h'
+libtoolize: linking file `ltdl/libltdl/lt_system.h'
+libtoolize: linking file `ltdl/libltdl/slist.h'
+libtoolize: linking file `ltdl/loaders/preopen.c'
+libtoolize: linking file `ltdl/lt__alloc.c'
+libtoolize: linking file `ltdl/lt_dlloader.c'
+libtoolize: linking file `ltdl/lt_error.c'
+libtoolize: linking file `ltdl/ltdl.c'
+libtoolize: linking file `ltdl/ltdl.h'
+libtoolize: linking file `ltdl/slist.c'
+]])
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+LT_INIT
+LTDL_INIT
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],
+[[ACLOCAL_AMFLAGS = -I ltdl/m4
+]])
+])# _LT_AT_LTDL_SETUP
+
+## ------------------------------------------------ ##
+## First we make sure libtoolize --ltdl is working. ##
+## ------------------------------------------------ ##
+
+AT_SETUP([copy ltdl.m4 with shared macro directory])
+
+_LT_AT_LTDL_SETUP
+
+LT_AT_CHECK_LIBTOOLIZE([--ltdl], 0, expout)
+
+AT_CLEANUP
+
+## ----------------------------------------------------- ##
+## And also that libtoolize is taking note of LTDL_INIT. ##
+## ----------------------------------------------------- ##
+
+AT_SETUP([correctly parse LTDL_INIT from configure.ac])
+
+_LT_AT_LTDL_SETUP
+
+LT_AT_CHECK_LIBTOOLIZE([], 0, expout)
+
+AT_CLEANUP
+
+## ----------------------------------------------------------- ##
+## And finally, that libtoolize diagnoses a missing LTDL_INIT. ##
+## ----------------------------------------------------------- ##
+
+AT_SETUP([diagnose missing LTDL_INIT invocation])
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `ltdl/config'.
+libtoolize: copying file `ltdl/config/compile'
+libtoolize: copying file `ltdl/config/config.guess'
+libtoolize: copying file `ltdl/config/config.sub'
+libtoolize: copying file `ltdl/config/depcomp'
+libtoolize: copying file `ltdl/config/install-sh'
+libtoolize: copying file `ltdl/config/missing'
+libtoolize: copying file `ltdl/config/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'.
+libtoolize: copying file `ltdl/m4/argz.m4'
+libtoolize: copying file `ltdl/m4/libtool.m4'
+libtoolize: copying file `ltdl/m4/ltdl.m4'
+libtoolize: copying file `ltdl/m4/ltoptions.m4'
+libtoolize: copying file `ltdl/m4/ltsugar.m4'
+libtoolize: copying file `ltdl/m4/ltversion.m4'
+libtoolize: copying file `ltdl/m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'.
+libtoolize: copying file `ltdl/COPYING.LIB'
+libtoolize: copying file `ltdl/README'
+libtoolize: copying file `ltdl/Makefile.am'
+libtoolize: copying file `ltdl/configure.ac'
+libtoolize: copying file `ltdl/aclocal.m4'
+libtoolize: copying file `ltdl/Makefile.in'
+libtoolize: copying file `ltdl/config-h.in'
+libtoolize: copying file `ltdl/configure'
+libtoolize: copying file `ltdl/argz_.h'
+libtoolize: copying file `ltdl/argz.c'
+libtoolize: copying file `ltdl/loaders/dld_link.c'
+libtoolize: copying file `ltdl/loaders/dlopen.c'
+libtoolize: copying file `ltdl/loaders/dyld.c'
+libtoolize: copying file `ltdl/loaders/load_add_on.c'
+libtoolize: copying file `ltdl/loaders/loadlibrary.c'
+libtoolize: copying file `ltdl/loaders/shl_load.c'
+libtoolize: copying file `ltdl/lt__dirent.c'
+libtoolize: copying file `ltdl/lt__strl.c'
+libtoolize: copying file `ltdl/libltdl/lt__alloc.h'
+libtoolize: copying file `ltdl/libltdl/lt__dirent.h'
+libtoolize: copying file `ltdl/libltdl/lt__glibc.h'
+libtoolize: copying file `ltdl/libltdl/lt__private.h'
+libtoolize: copying file `ltdl/libltdl/lt__strl.h'
+libtoolize: copying file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: copying file `ltdl/libltdl/lt_error.h'
+libtoolize: copying file `ltdl/libltdl/lt_system.h'
+libtoolize: copying file `ltdl/libltdl/slist.h'
+libtoolize: copying file `ltdl/loaders/preopen.c'
+libtoolize: copying file `ltdl/lt__alloc.c'
+libtoolize: copying file `ltdl/lt_dlloader.c'
+libtoolize: copying file `ltdl/lt_error.c'
+libtoolize: copying file `ltdl/ltdl.c'
+libtoolize: copying file `ltdl/ltdl.h'
+libtoolize: copying file `ltdl/slist.c'
+libtoolize: Remember to add `LTDL_INIT' to configure.ac.
+libtoolize: Consider adding `-I ltdl/m4' to ACLOCAL_AMFLAGS in Makefile.am.
+]])
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+LT_INIT
+AC_OUTPUT
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--ltdl --copy], 0, expout)
+
+AT_CLEANUP
+
+m4_popdef([_LT_AT_LTDL_SETUP])
+
+## ------------------------------------------------------ ##
+## Creating an aclocal.m4 without in-tree libtool macros. ##
+## ------------------------------------------------------ ##
+
+AT_SETUP([upgrading verbatim style aclocal.m4])
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+AC_CONFIG_AUX_DIR([build-aux])
+LT_INIT
+AC_OUTPUT
+]])
+
+AT_DATA([expout],
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: You should add the contents of the following files to `aclocal.m4':
+libtoolize:   `/usr/local/share/aclocal/libtool.m4'
+libtoolize:   `/usr/local/share/aclocal/ltoptions.m4'
+libtoolize:   `/usr/local/share/aclocal/ltversion.m4'
+libtoolize:   `/usr/local/share/aclocal/ltsugar.m4'
+libtoolize:   `/usr/local/share/aclocal/lt~obsolete.m4'
+libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
+libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout)
+
+
+## --------------------------------------- ##
+## Upgrading a hand maintained aclocal.m4. ##
+## --------------------------------------- ##
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],
+[[ACLOCAL_AMFLAGS = -I m4
+]])
+
+AT_DATA([aclocal.m4],
+[[# This should need upgrading:
+# serial 25 LT_INIT
+AC_DEFUN([LT_INIT],
+[blah])
+
+# This is newer than the upgrade version:
+# serial 99999 ltoptions.m4
+
+# This is older than the upgrade version:
+# serial 1 ltversion.m4
+]])
+
+AT_DATA([expout],
+[[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: You should add the contents of `m4/ltsugar.m4' to `aclocal.m4'.
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: You should add the contents of `m4/ltversion.m4' to `aclocal.m4'.
+libtoolize: copying file `m4/lt~obsolete.m4'
+libtoolize: You should add the contents of `m4/lt~obsolete.m4' to `aclocal.m4'.
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout)
+
+
+## ------------------------------------------- ##
+## Upgrading an aclocal maintained aclocal.m4. ##
+## ------------------------------------------- ##
+
+LT_AT_ACLOCAL([-I m4])
+
+rm -f m4/libtool.m4 m4/ltoptions.m4
+
+# This file should be upgraded.
+AT_DATA([m4/libtool.m4], [[
+# serial 25 LT_INIT
+AC_DEFUN([LT_INIT])
+]])
+
+# This file has a very high serial number, and should be left unchanged.
+AT_DATA([m4/ltoptions.m4], [[
+# serial 99999 ltoptions.m4
+]])
+
+AT_DATA([expout],
+[[libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+]])
+
+AT_DATA([experr],
+[[libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout, experr)
+
+## ----------------------------------------------------------- ##
+## Now, a forced update to downgrade files with newer serials. ##
+## ----------------------------------------------------------- ##
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --force], 0, expout)
+
+AT_CLEANUP
+
+
+## ------------------------------------------------------------------ ##
+## Ensure libtoolize works when AC_CONFIG_MACRO_DIR is not specified. ##
+## ------------------------------------------------------------------ ##
+
+AT_SETUP([verbatim aclocal.m4 w/o AC_CONFIG_MACRO_DIR])
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+LT_INIT
+AC_OUTPUT
+]])
+
+AT_DATA([aclocal.m4],
+[[# This should need upgrading:
+# serial 25 LT_INIT
+AC_DEFUN([LT_INIT],
+[blah])
+
+# This is newer than the upgrade version:
+# serial 99999 ltoptions.m4
+
+# This is older than the upgrade version:
+# serial 1 ltversion.m4
+]])
+
+AT_DATA([expout],
+[[libtoolize: putting auxiliary files in `.'.
+libtoolize: copying file `./ltmain.sh'
+libtoolize: You should add the contents of the following files to `aclocal.m4':
+libtoolize:   `/usr/local/share/aclocal/libtool.m4'
+libtoolize:   `/usr/local/share/aclocal/ltversion.m4'
+libtoolize:   `/usr/local/share/aclocal/ltsugar.m4'
+libtoolize:   `/usr/local/share/aclocal/lt~obsolete.m4'
+libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
+libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout)
+
+
+## ----------------------------------------------------------------------- ##
+## Upgrading an aclocal maintained aclocal.m4 without AC_CONFIG_MACRO_DIR. ##
+## ----------------------------------------------------------------------- ##
+
+LT_AT_ACLOCAL([-I $abs_top_srcdir/libltdl/m4])
+
+## The following code is adapted (and simplified) from libtoolize.m4sh
+####
+: ${GREP="grep"}
+: ${SED="sed"}
+
+basename="s,^.*/,,"
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+# func_serial filename [macro_regex]
+# Output the value of the serial number comment in FILENAME, where the
+# comment line must also match MACRO_REGEX, if given.
+func_serial ()
+{
+    my_filename="$1"
+    my_macro_regex="$2"
+    my_sed_serial='
+	/^# serial [1-9][0-9.]*[ 	]*'"$my_macro_regex"'[ 	]*$/ {
+	    s,^# serial \([1-9][0-9.]*\).*$,\1,
+	    q
+	}
+	d'
+
+    # Search FILENAME and all the files it m4_includes for a serial number
+    # in the file that AC_DEFUNs MACRO_REGEX.
+    my_serial=
+    if test -z "$my_macro_regex" ||
+       test "$my_filename" = aclocal.m4 ||
+       test "$my_macro_regex" = `echo "$my_filename" | $SED "$basename"` ||
+       func_grep '^AC_DEFUN(\@<:@'"$my_macro_regex" "$my_filename"
+    then
+      my_serial=`$SED -e "$my_sed_serial" "$my_filename"`
+    fi
+
+    # If the file has no serial number, something is badly wrong!
+    test -n "$my_serial" || exit 1
+
+    echo $my_serial
+}
+
+# Make the serial number in aclocal.m4 higher than installed ltoptions.m4,
+# and the others match the macro files that libtoolize will compare against.
+libtool_serial=`func_serial "$tst_aclocaldir/libtool.m4" LT_INIT`
+ltversion_serial=`func_serial "$tst_aclocaldir/ltversion.m4" ltversion.m4`
+ltsugar_serial=`func_serial "$tst_aclocaldir/ltsugar.m4" ltsugar.m4`
+lt_obsolete_serial=`func_serial "$tst_aclocaldir/lt~obsolete.m4" lt~obsolete.m4`
+$SED -e 's,^#.*serial.*ltoptions.m4$,# serial 99999 ltoptions.m4,' \
+  -e "s,^#.*serial.*libtool.m4\$,# serial $libtool_serial libtool.m4," \
+  -e "s,^#.*serial.*ltversion.m4\$,# serial $ltversion_serial ltversion.m4," \
+  -e "s,^#.*serial.*ltsugar.m4\$,# serial $ltsugar_serial ltsugar.m4," \
+  -e "s,^#.*serial.*lt~obsolete.m4\$,# serial $lt_obsolete_serial lt~obsolete.m4," \
+ < aclocal.m4 > aclocal.m4t
+mv -f aclocal.m4t aclocal.m4
+
+AT_DATA([expout],
+[[libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
+libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, expout)
+
+
+## --------------------- ##
+## Now, a forced update. ##
+## --------------------- ##
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in `.'.
+libtoolize: copying file `./ltmain.sh'
+libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
+libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --force], 0, expout)
+
+AT_CLEANUP
+
+
+## ------------------------------------------------------------- ##
+## Check nonrecursive ltdl puts m4 files in AC_CONFIG_MACRO_DIR. ##
+## ------------------------------------------------------------- ##
+
+AT_SETUP([nonrecursive ltdl with AC_CONFIG_MACRO_DIR])
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/argz.m4'
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltdl.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'.
+libtoolize: copying file `ltdl/COPYING.LIB'
+libtoolize: copying file `ltdl/README'
+libtoolize: copying file `ltdl/argz_.h'
+libtoolize: copying file `ltdl/argz.c'
+libtoolize: copying file `ltdl/loaders/dld_link.c'
+libtoolize: copying file `ltdl/loaders/dlopen.c'
+libtoolize: copying file `ltdl/loaders/dyld.c'
+libtoolize: copying file `ltdl/loaders/load_add_on.c'
+libtoolize: copying file `ltdl/loaders/loadlibrary.c'
+libtoolize: copying file `ltdl/loaders/shl_load.c'
+libtoolize: copying file `ltdl/lt__dirent.c'
+libtoolize: copying file `ltdl/lt__strl.c'
+libtoolize: copying file `ltdl/libltdl/lt__alloc.h'
+libtoolize: copying file `ltdl/libltdl/lt__dirent.h'
+libtoolize: copying file `ltdl/libltdl/lt__glibc.h'
+libtoolize: copying file `ltdl/libltdl/lt__private.h'
+libtoolize: copying file `ltdl/libltdl/lt__strl.h'
+libtoolize: copying file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: copying file `ltdl/libltdl/lt_error.h'
+libtoolize: copying file `ltdl/libltdl/lt_system.h'
+libtoolize: copying file `ltdl/libltdl/slist.h'
+libtoolize: copying file `ltdl/loaders/preopen.c'
+libtoolize: copying file `ltdl/lt__alloc.c'
+libtoolize: copying file `ltdl/lt_dlloader.c'
+libtoolize: copying file `ltdl/lt_error.c'
+libtoolize: copying file `ltdl/ltdl.c'
+libtoolize: copying file `ltdl/ltdl.h'
+libtoolize: copying file `ltdl/slist.c'
+libtoolize: creating file `ltdl/Makefile.inc'
+]])
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+LTDL_INIT([nonrecursive])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],
+[[ACLOCAL_AMFLAGS = -I m4
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --install --ltdl=ltdl], 0, expout)
+
+AT_CLEANUP
+
+
+## -------------------------------------------------------- ##
+## Check subproject ltdl with non-shared AC_CONFIG_.*_DIRs. ##
+## -------------------------------------------------------- ##
+
+AT_SETUP([subproject ltdl with non-shared directories])
+
+AT_DATA(expout,
+[[libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting auxiliary files in `build-aux'.
+libtoolize: copying file `ltdl/config/compile'
+libtoolize: copying file `ltdl/config/config.guess'
+libtoolize: copying file `ltdl/config/config.sub'
+libtoolize: copying file `ltdl/config/depcomp'
+libtoolize: copying file `ltdl/config/install-sh'
+libtoolize: copying file `ltdl/config/missing'
+libtoolize: copying file `ltdl/config/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `acm4'.
+libtoolize: copying file `acm4/argz.m4'
+libtoolize: copying file `acm4/libtool.m4'
+libtoolize: copying file `acm4/ltdl.m4'
+libtoolize: copying file `acm4/ltoptions.m4'
+libtoolize: copying file `acm4/ltsugar.m4'
+libtoolize: copying file `acm4/ltversion.m4'
+libtoolize: copying file `acm4/lt~obsolete.m4'
+libtoolize: putting macros in `ltdl/m4'.
+libtoolize: copying file `ltdl/m4/argz.m4'
+libtoolize: copying file `ltdl/m4/libtool.m4'
+libtoolize: copying file `ltdl/m4/ltdl.m4'
+libtoolize: copying file `ltdl/m4/ltoptions.m4'
+libtoolize: copying file `ltdl/m4/ltsugar.m4'
+libtoolize: copying file `ltdl/m4/ltversion.m4'
+libtoolize: copying file `ltdl/m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'.
+libtoolize: copying file `ltdl/COPYING.LIB'
+libtoolize: copying file `ltdl/README'
+libtoolize: copying file `ltdl/Makefile.am'
+libtoolize: copying file `ltdl/configure.ac'
+libtoolize: copying file `ltdl/aclocal.m4'
+libtoolize: copying file `ltdl/Makefile.in'
+libtoolize: copying file `ltdl/config-h.in'
+libtoolize: copying file `ltdl/configure'
+libtoolize: copying file `ltdl/argz_.h'
+libtoolize: copying file `ltdl/argz.c'
+libtoolize: copying file `ltdl/loaders/dld_link.c'
+libtoolize: copying file `ltdl/loaders/dlopen.c'
+libtoolize: copying file `ltdl/loaders/dyld.c'
+libtoolize: copying file `ltdl/loaders/load_add_on.c'
+libtoolize: copying file `ltdl/loaders/loadlibrary.c'
+libtoolize: copying file `ltdl/loaders/shl_load.c'
+libtoolize: copying file `ltdl/lt__dirent.c'
+libtoolize: copying file `ltdl/lt__strl.c'
+libtoolize: copying file `ltdl/libltdl/lt__alloc.h'
+libtoolize: copying file `ltdl/libltdl/lt__dirent.h'
+libtoolize: copying file `ltdl/libltdl/lt__glibc.h'
+libtoolize: copying file `ltdl/libltdl/lt__private.h'
+libtoolize: copying file `ltdl/libltdl/lt__strl.h'
+libtoolize: copying file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: copying file `ltdl/libltdl/lt_error.h'
+libtoolize: copying file `ltdl/libltdl/lt_system.h'
+libtoolize: copying file `ltdl/libltdl/slist.h'
+libtoolize: copying file `ltdl/loaders/preopen.c'
+libtoolize: copying file `ltdl/lt__alloc.c'
+libtoolize: copying file `ltdl/lt_dlloader.c'
+libtoolize: copying file `ltdl/lt_error.c'
+libtoolize: copying file `ltdl/ltdl.c'
+libtoolize: copying file `ltdl/ltdl.h'
+libtoolize: copying file `ltdl/slist.c'
+libtoolize: Consider using `AC_CONFIG_AUX_DIR([ltdl/config])' in configure.ac.
+libtoolize: Consider using `AC_CONFIG_MACRO_DIR([ltdl/m4])' in configure.ac.
+libtoolize: Consider adding `-I ltdl/m4' to ACLOCAL_AMFLAGS in Makefile.am.
+]])
+
+AT_DATA([configure.ac],
+[[AC_INIT([libtoolize-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([acm4])
+LT_INIT
+LTDL_INIT([subproject])
+AC_OUTPUT
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --install], 0, expout)
+
+AT_CLEANUP
+
+
+## --------------------------- ##
+## Garbled LIBTOOLIZE_OPTIONS. ##
+## --------------------------- ##
+
+AT_SETUP([LIBTOOLIZE_OPTIONS])
+
+_LT_CONFIGURE_AC
+
+LIBTOOLIZE_OPTIONS="narf"
+export LIBTOOLIZE_OPTIONS
+
+AT_DATA(experr,
+[[libtoolize: garbled LIBTOOLIZE_OPTIONS near `narf'
+libtoolize: Try `libtoolize --help' for more information.
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 1, [ignore], experr)
+
+
+## --------------------------- ##
+## Unknown LIBTOOLIZE_OPTIONS. ##
+## --------------------------- ##
+
+LIBTOOLIZE_OPTIONS=--no-such-option
+export LIBTOOLIZE_OPTIONS
+
+AT_DATA(experr,
+[[libtoolize: warning: unrecognized environment option `--no-such-option'
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, [ignore], experr)
+
+
+## ----------------------------- ##
+## --no-warn environment option. ##
+## ----------------------------- ##
+
+LIBTOOLIZE_OPTIONS=--no-warn,--no-such-option
+export LIBTOOLIZE_OPTIONS
+
+: >experr
+
+LT_AT_CHECK_LIBTOOLIZE([--copy], 0, [ignore], experr)
+
+AT_CLEANUP
+
+
+## ------------------------------------------------------ ##
+## Remove file droppings from old libtoolize invocations. ##
+## ------------------------------------------------------ ##
+
+AT_SETUP([cleanup old installation])
+
+_LT_CONFIGURE_AC
+
+AT_DATA([Makefile.am],
+[[ACLOCAL_AMFLAGS = -I m4
+]])
+
+AT_DATA([acinclude.m4],
+[[AC_DEFUN([LT_INIT],
+[: keep me, I might be hand maintained!]) # LT_INIT
+]])
+
+AT_DATA([libltdl/acinclude.m4],
+[[AC_DEFUN([LT_INIT],
+[: delete me, I was left here by on old libltdl build]) # LT_INIT
+]])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --force --ltdl], 0, [ignore])
+
+# check files are left as expected
+AT_CHECK([grep 'keep me' acinclude.m4], 0, [ignore])
+AT_CHECK([test -f libltdl/acinclude.m4], 1, [ignore], [ignore])
+
+AT_CLEANUP
+
diff --git a/tests/link-2.test b/tests/link-2.test
new file mode 100755
index 0000000..6c0f519
--- /dev/null
+++ b/tests/link-2.test
@@ -0,0 +1,50 @@
+#! /bin/sh
+# link-2.test - check that .lo files aren't made into programs.
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+rm -f hell.lo
+cat > hell.lo <<EOF
+# Generated by libtool
+pic_object=none
+non_pic_object=hell.o
+EOF
+
+# Try a sample link command.
+linkresult=`$LIBTOOL -n --mode=link $CC -o something foo.o hell.lo`
+res=$?
+
+rm -f hell.lo
+
+test $res -eq 0 || exit $EXIT_FAILURE
+
+echo "$linkresult"
+case "$linkresult" in
+*".lo "*)
+  func_fail "$progname: .lo files should not be linked into programs"
+  ;;
+esac
+
+exit $EXIT_SUCCESS
diff --git a/tests/link-order.at b/tests/link-order.at
new file mode 100644
index 0000000..05ce776
--- /dev/null
+++ b/tests/link-order.at
@@ -0,0 +1,126 @@
+# link-order.at -- ensure that library linking order matches  -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Alexandre Oliva & Ralf Wildenhues, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AT_SETUP([Link order test])
+AT_KEYWORDS([libtool])
+eval `$LIBTOOL --config | $EGREP '^(hardcode_direct|hardcode_direct_absolute|shrext_cmds)='`
+LDFLAGS="$LDFLAGS -no-undefined"
+
+module=no
+eval shared_ext=\"$shrext_cmds\"
+
+prefix_old=`pwd`/old
+prefix_new=`pwd`/new
+mkdir src $prefix_old $prefix_new $prefix_old/lib $prefix_new/lib
+
+AT_DATA(src/c.c,
+[[int c = 1;
+]])
+
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c src/c.c -o src/c.lo
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/libcee.la src/c.lo -rpath $prefix_old/lib
+$LIBTOOL --mode=install cp src/libcee.la $prefix_old/lib/libcee.la
+
+for i in old new; do
+  rm -rf src
+  mkdir src
+
+  cat >src/a_$i.c <<EOF
+/* w32 fun, MSVC needs to dllimport when using a shared library, so use
+ * DLL_EXPORT to discriminate as that happens to coinside in this case.
+ * gnu has auto import.
+ */
+#if defined _MSC_VER && defined DLL_EXPORT
+#  define LIBCEE_SCOPE __declspec(dllimport)
+#else
+#  define LIBCEE_SCOPE extern
+#endif
+LIBCEE_SCOPE int c;
+extern int b_$i();
+int a_$i() { return c + b_$i(); }
+EOF
+
+  cat >src/b_$i.c <<EOF
+/* w32 fun, MSVC needs to dllimport when using a shared library, so use
+ * DLL_EXPORT to discriminate as that happens to coinside in this case.
+ * gnu has auto import.
+ */
+#if defined _MSC_VER && defined DLL_EXPORT
+#  define LIBCEE_SCOPE __declspec(dllimport)
+#else
+#  define LIBCEE_SCOPE extern
+#endif
+LIBCEE_SCOPE int c;
+int b_$i() { return 1 + c; }
+EOF
+
+  prefix=`eval echo \\$prefix_$i`
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c src/a_$i.c -o src/a.lo
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c src/b_$i.c -o src/b.lo
+  $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/libb.la src/b.lo \
+      -L$prefix_old/lib -lcee -rpath $prefix/lib
+  $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/liba.la src/a.lo \
+      src/libb.la -L$prefix_old/lib -lcee -rpath $prefix/lib
+  $LIBTOOL --mode=install cp src/libb.la $prefix/lib/libb.la
+  AT_CHECK([$LIBTOOL --mode=install cp src/liba.la $prefix/lib/liba.la],
+	[0], [stdout], [stderr])
+done
+
+$LIBTOOL --mode=clean rm -f src/libb.la
+$LIBTOOL --mode=clean rm -f src/liba.la
+
+case $host_os in
+aix* | interix*) ;;  # These systems have different path syntax
+*)
+  # Do not error if we do not relink (e.g. static-only systems)
+  case $hardcode_direct$hardcode_direct_absolute in
+  yesno)
+    AT_CHECK([if $EGREP relinking stderr; then
+         $EGREP " .*\/new\/lib/libb$shared_ext .*\/old\/lib/libcee$shared_ext" stdout
+       else :; fi], [0], [ignore], [], [echo "wrong link order"])
+    ;;
+  *)
+    AT_CHECK([if $EGREP relinking stderr; then
+         $EGREP " -L.*\/new\/lib -lb -L.*\/old\/lib -lcee" stdout
+       else :; fi], [0], [ignore], [], [echo "wrong link order"])
+    ;;
+  esac
+  ;;
+esac
+
+for i in old new; do
+  cat >src/main_$i.c <<EOF
+extern int a_$i();
+int main(void) { return a_$i() != 3; }
+EOF
+
+  prefix=`eval echo \\$prefix_$i`
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c src/main_$i.c -o src/main_$i.lo
+  AT_CHECK($LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/main_$i$EXEEXT src/main_$i.lo -L$prefix/lib -la,
+	   [0], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([src/main_$i])
+done
+
+AT_CLEANUP
diff --git a/tests/link-order2.at b/tests/link-order2.at
new file mode 100644
index 0000000..a6eea0e
--- /dev/null
+++ b/tests/link-order2.at
@@ -0,0 +1,150 @@
+# link-order2.at -- test link order of deplibs                -*- Autotest -*-
+#
+#   Copyright (C) 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2006
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# link-order2.test: make sure that depdepls are added right after
+# the libs that pull them in: necessary at least for static linking
+# and on systems where libraries do not link against other libraries.
+#
+# We test by overriding one symbol from a depdepl library.
+# Test both a libtool library and a non-libtool library (simulated
+# by removing the .la file, and setting $shlibpath_var so it is
+# found at runtime).  In order to ensure that the depdepl is
+# actually loaded in each case, we also use an unrelated symbol
+# from it directly in the main program.  We test for failure by
+# reversing the link order.
+# We test both static and shared: it should work in both cases.
+# But for the static case to work, the two symbols in the depdepl
+# need to be in separate object files, otherwise duplicate symbol
+# definitions can happen.
+
+# The shared case fails on AIX without runtimelinking and on Darwin.
+# On Darwin, using shared libs this only works without -no-undefined
+# and only with MACOS_DEPLOYMENT_TARGET 10.2 and earlier
+# (in that case $allow_undefined_flag contains -flat_namespace).
+
+AT_SETUP([Link order of deplibs])
+AT_KEYWORDS([libtool])
+AT_KEYWORDS([interactive])dnl running 'wrong' may cause a popup window.
+
+eval `$LIBTOOL --config | $EGREP '^(shlibpath_var|allow_undefined_flag)='`
+
+undefined_setting=-no-undefined
+shared_fails=no
+case $host_os,$LDFLAGS,$allow_undefined_flag in
+aix*,*-brtl*,*) ;;
+aix*) shared_fails=yes ;;
+darwin*,*,*-flat_namespace*) undefined_setting= ;;
+darwin*,*,*) shared_fails=yes ;;
+esac
+
+deflibdir=`pwd`/lib
+defbindir=`pwd`/lib
+libdir=`pwd`/inst/lib
+bindir=`pwd`/inst/bin
+mkdir bin lib inst inst/bin inst/lib
+LDFLAGS="$LDFLAGS $undefined_setting -L$deflibdir"
+
+cat >a0.c <<\EOF
+int a (void) { return 1; }
+EOF
+
+cat >a1.c <<\EOF
+int a (void) { return 0; }
+EOF
+
+cat >b.c <<\EOF
+int a (void);
+int b (void) { return a (); }
+EOF
+
+cat >main.c <<\EOF
+#include <stdlib.h>
+extern int a (void);
+extern int b (void);
+int main (void)
+{
+  return !(a () + b () == 0);
+}
+EOF
+
+for file in a0 a1 b; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file.c
+done
+$CC $CPPFLAGS $CFLAGS -c main.c
+
+# Build an old, installed library.
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o liba0.la a0.lo -rpath $deflibdir
+$LIBTOOL --mode=install cp liba0.la $deflibdir/liba0.la
+$LIBTOOL --mode=clean rm -f liba0.la
+
+for type_of_depdepl in libtool non-libtool; do
+  echo "type of depdepl: $type_of_depdepl"
+  if test $type_of_depdepl = non-libtool; then
+    # Simulate a non-Libtool system library.
+    rm $deflibdir/liba1.la
+    addpath=$deflibdir
+    if test "$shlibpath_var" = PATH; then
+      addpath=$defbindir
+    fi
+    sep=
+    eval test -n \"\$$shlibpath_var\" && sep=:
+    eval $shlibpath_var='$addpath$sep$'$shlibpath_var
+    export $shlibpath_var
+  fi
+  for static in '' -static-libtool-libs; do
+    case `$LIBTOOL --features` in
+    *disable\ static\ libraries*) test "$static" = '' || continue;;
+    esac
+    test "$type_of_depdepl,$static" = "non-libtool,-static-libtool-libs" &&
+       static=-all-static
+    $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o liba1.la a1.lo -rpath $libdir
+    $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o libb.la b.lo liba1.la -rpath $libdir
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o main$EXEEXT main.$OBJEXT libb.la -la0],
+	     [], [ignore], [ignore])
+    LT_AT_EXEC_CHECK([./main])
+    # Now test that if we reverse the link order, the program fails.
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o wrong$EXEEXT main.$OBJEXT -la0 libb.la],
+	     [], [ignore], [ignore])
+    if test $shared_fails,$static != yes,; then
+      LT_AT_EXEC_CHECK([./wrong], [1], [], [ignore], [|| (exit 1)])
+    fi
+
+    $LIBTOOL --mode=install cp liba1.la $libdir/liba1.la
+    $LIBTOOL --mode=install cp libb.la $libdir/libb.la
+    $LIBTOOL --mode=install cp main$EXEEXT $bindir/main$EXEEXT
+    $LIBTOOL --mode=install cp wrong$EXEEXT $bindir/wrong$EXEEXT
+    $LIBTOOL --mode=clean rm -f liba1.la libb.la
+    LT_AT_EXEC_CHECK([$bindir/main])
+    if test $shared_fails,$static != yes,; then
+      LT_AT_EXEC_CHECK([$bindir/wrong], [1], [], [ignore], [|| (exit 1)])
+    fi
+  done
+done
+
+AT_CHECK([test $shared_fails = no || (exit 77)])
+
+# Now the converse: if both the program and the library need libm, then
+# it needs to be sorted last.  (TODO)
+
+AT_CLEANUP
diff --git a/tests/link.test b/tests/link.test
new file mode 100755
index 0000000..00b2068
--- /dev/null
+++ b/tests/link.test
@@ -0,0 +1,37 @@
+#! /bin/sh
+# link.test - make sure that linking against libraries is legal.
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+# Try a sample link command.
+linkresult=`$LIBTOOL -n --mode=link $CC -o gettext ../lib/libnlsut.a`
+test $? -eq 0 || exit $EXIT_FAILURE
+
+echo "$linkresult"
+echo "$linkresult" | ${EGREP} "../lib/libnlsut.a" >/dev/null 2>&1 || {
+  func_fail "$progname: ../lib/libnlsut.a was not used as expected in linking"
+}
+
+exit $EXIT_SUCCESS
diff --git a/tests/loadlibrary.at b/tests/loadlibrary.at
new file mode 100644
index 0000000..e87cb90
--- /dev/null
+++ b/tests/loadlibrary.at
@@ -0,0 +1,269 @@
+# loadlibrary.at -- test loadlibrary functionality          -*- Autotest -*-
+#
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([loadlibrary error messages])
+AT_KEYWORDS([libltdl])
+
+eval "`$LIBTOOL --config | $EGREP '^(objdir)='`"
+
+AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+
+static int
+standard_error_message(const char *error)
+{
+  int error_number;
+
+  for (error_number = 0; error_number < LT_ERROR_MAX; ++error_number)
+    {
+      lt_dlseterror (error_number);
+      if (error == lt_dlerror ())
+	{
+	  return 1;
+	}
+    }
+
+  lt_dlseterror (LT_ERROR_UNKNOWN);
+  return 0;
+}
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle module = NULL;
+  const lt_dlvtable *loadlibrary;
+  const lt_dlvtable *preopen;
+  lt_dlloader loader = NULL;
+  lt_dlloader next;
+  const lt_dlvtable *vtable;
+  void *symbol;
+  const char *error;
+
+  if (argc < 2)
+    {
+      fprintf (stderr, "usage: %s plugin [symbol]\n", argv[0]);
+      return 1;
+    }
+
+  lt_dlinit ();
+
+  loadlibrary = lt_dlloader_find ("lt_loadlibrary");
+  if (!loadlibrary)
+    {
+      /* Skip if the loadlibrary loader isn't supported */
+      printf ("loadlibrary loader not found\n");
+      err = 77;
+      goto cleanup;
+    }
+
+  preopen = lt_dlloader_find ("lt_preopen");
+  if (!loadlibrary)
+    {
+      printf ("preopen loader not found\n");
+      err = 2;
+      goto cleanup;
+    }
+
+  /* Remove all loaders except the preopen and loadlibrary loaders. */
+  while (next = lt_dlloader_next (loader))
+    {
+      if (lt_dlloader_get (next) == loadlibrary)
+	{
+	  loader = next;
+	  continue;
+	}
+
+      if (lt_dlloader_get (next) == preopen)
+	{
+	  loader = next;
+	  continue;
+	}
+
+      lt_dlloader_remove (lt_dlloader_get (next)->name);
+    }
+
+  module = lt_dlopen (argv[1]);
+  error = lt_dlerror ();
+
+  if (module)
+    {
+      printf ("lt_dlopen: success!\n");
+
+      if (argc == 2)
+	{
+	  /* But failure was the desired result... */
+	  printf ("expected failure\n");
+	  err = 2;
+	  goto cleanup;
+	}
+    }
+  else if (argc > 2)
+    {
+      /* Didn't expect failure... */
+      printf ("lt_dlopen: failure: %s\n", error);
+      err = 2;
+      goto cleanup;
+    }
+  else if (standard_error_message (error))
+    {
+      /* Expected custom error message... */
+      printf ("lt_dlopen: standard error (bad): %s\n", error);
+      err = 1;
+      goto cleanup;
+    }
+  else
+    {
+      printf ("lt_dlopen: custom error (good): %s\n", error);
+      goto cleanup;
+    }
+
+  symbol = lt_dlsym (module, argv[2]);
+  error = lt_dlerror ();
+
+  if (symbol)
+    {
+      printf ("lt_dlsym: success!\n");
+    }
+  else if (standard_error_message (error))
+    {
+      /* Expected custom failure message... */
+      printf ("lt_dlsym: standard error (bad): %s\n", error);
+      err = 1;
+    }
+  else
+    {
+      printf ("lt_dlsym: custom error (good): %s\n", error);
+    }
+
+cleanup:
+  if (module)
+    {
+      lt_dlclose (module);
+    }
+  lt_dlexit ();
+  return err;
+}
+]])
+
+AT_DATA([foomod.c],
+[[
+#ifdef __cplusplus
+extern "C"
+#endif
+int foosym (void);
+int
+foosym (void)
+{
+  return 0;
+}
+]])
+
+AT_DATA([bardep.c],
+[[
+#ifdef __cplusplus
+extern "C"
+#endif
+int bardep (void);
+int
+bardep (void)
+{
+  return 0;
+}
+]])
+
+AT_DATA([barmod.c],
+[[
+#ifdef __cplusplus
+extern "C" {
+#endif
+int bardep (void);
+int barsym (void);
+#ifdef __cplusplus
+}
+#endif
+int
+barsym (void)
+{
+  return bardep ();
+}
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+inst=`pwd`/inst
+libdir=$inst/lib
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c main.c], [], [ignore], [ignore])
+for file in foomod.c bardep.c barmod.c; do
+  AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file],
+	   [], [ignore], [ignore])
+done
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o foomod.la ]dnl
+	 [-rpath $libdir -module -avoid-version -no-undefined ]dnl
+	 [foomod.lo],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libbardep.la ]dnl
+	 [-rpath $libdir -avoid-version -no-undefined ]dnl
+	 [bardep.lo],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o barmod.la ]dnl
+	 [-rpath $libdir -module -avoid-version -no-undefined ]dnl
+	 [barmod.lo ./libbardep.la],
+	 [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT ]dnl
+	 [main.$OBJEXT $LIBLTDL],
+	 [], [ignore], [ignore])
+
+. ./foomod.la
+AT_CHECK([test -n "$dlname" || (exit 77)])
+
+LT_AT_EXEC_CHECK([./main], [], [ignore], [ignore], [./foomod.la no_symbol])
+
+#   chmod -x doesn't appear to work in MSYS, and Wine can load no-exec dlls.
+dnl chmod -x $objdir/$dlname
+dnl LT_AT_EXEC_CHECK([./main], [], [ignore], [ignore], [./foomod.la])
+
+rm -f $objdir/$dlname
+LT_AT_EXEC_CHECK([./main], [], [ignore], [ignore], [./foomod.la])
+
+LT_AT_EXEC_CHECK([./main], [], [ignore], [ignore], [./barmod.la no_symbol])
+
+. ./libbardep.la
+#   chmod -x doesn't appear to work in MSYS, and Wine can load no-exec dlls.
+dnl chmod -x $objdir/$dlname
+dnl LT_AT_EXEC_CHECK([./main], [], [ignore], [ignore], [./barmod.la])
+
+rm -f $objdir/$dlname
+LT_AT_EXEC_CHECK([./main], [], [ignore], [ignore], [./barmod.la])
+
+AT_CLEANUP
diff --git a/tests/localization.at b/tests/localization.at
new file mode 100644
index 0000000..392511e
--- /dev/null
+++ b/tests/localization.at
@@ -0,0 +1,73 @@
+# localization.at -- libtool and locales                -*- Autotest -*-
+#
+#   Copyright (C) 2008, 2009, 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([localized compiler messages])
+AT_KEYWORDS([libtool])
+
+# Let's try German locale.  :-)
+m4_pushdef([lt_localize],
+[LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE])
+
+AT_DATA([a.c],
+[[int x[-1];
+]])
+AT_DATA([b.c],
+[[int y;
+]])
+
+# First see if setting a locale is accepted at all.
+AT_CHECK([(lt_localize $CC $CPPFLAGS $CFLAGS -c b.c) || exit 77],
+	 [], [stdout], [stderr])
+
+# Find out about expected output.
+AT_CHECK([(lt_localize $CC $CPPFLAGS $CFLAGS -c a.c) || exit 1],
+	 [1], [stdout], [stderr])
+LT_AT_NORMALIZE_COMPILER_OUTPUT([stdout], [expected-stdout])
+LT_AT_NORMALIZE_COMPILER_OUTPUT([stderr], [expected-stderr])
+AT_CHECK([(lt_localize $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a.c) || exit 1],
+	 [1], [stdout], [stderr])
+LT_AT_NORMALIZE_COMPILER_OUTPUT([stdout], [libtool-stdout])
+LT_AT_NORMALIZE_COMPILER_OUTPUT([stderr], [libtool-stderr])
+# Avoid these errors:
+# GNU/Linux:
+#   /bin/sh: warning: setlocale: LC_ALL: cannot change locale (de_DE)
+# HP-UX:
+#   Warning! One or more of your selected locales are not available.
+#   Please invoke the commands "locale" and "locale -a" to verify your
+#   selections and the available locales.
+#
+#   Continuing processing using the "C" locale.
+AT_CHECK([grep locale stdout stderr && exit 77], [1])
+AT_CHECK([diff expected-stderr libtool-stderr])
+AT_CHECK([diff expected-stdout libtool-stdout])
+
+# check that we get our quoting right.
+m4_define([lt_localize],
+[[LANGUAGE='a; nosuchprogram " '\''  & $x /#+*(){}|,:`\ !%']])
+AT_CHECK([(lt_localize $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c b.c)],
+	 [0], [stdout], [stderr])
+AT_CHECK([grep nosuchprogram stdout stderr], [1])
+
+m4_popdef([lt_localize])
+
+AT_CLEANUP
diff --git a/tests/lt_dladvise.at b/tests/lt_dladvise.at
new file mode 100644
index 0000000..18c2104
--- /dev/null
+++ b/tests/lt_dladvise.at
@@ -0,0 +1,389 @@
+# lt_dladvise.at -- test libltdl functionality                -*- Autotest -*-
+#
+#   Copyright (C) 2007, 2008, 2009 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Try to keep the new interfaces of HEAD separate from those of
+# branch-1-5 to facilitate testing of older releases.
+
+AT_SETUP([lt_dlopenadvise library loading])
+AT_KEYWORDS([libltdl])
+
+AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+
+typedef int funcp (int);
+
+static int errors = 0;
+
+static void
+complain (const char *msg)
+{
+  const char *errmsg = lt_dlerror ();
+  fprintf (stderr, "%s", msg);
+  if (errmsg)
+    fprintf (stderr, ": %s\n", errmsg);
+  else
+    fprintf (stderr, ".\n");
+  ++errors;
+}
+
+static lt_dlhandle
+moduleopen (const char *filename, lt_dladvise advise)
+{
+  lt_dlhandle handle;
+
+  handle = lt_dlopenadvise (filename, advise);
+  if (!handle)
+    {
+      fprintf (stderr, "can't open the module %s!\n", filename);
+      complain ("error was");
+    }
+
+  return handle;
+}
+
+static int
+moduletest (lt_dlhandle handle, const char *fname, const char *vname)
+{
+  funcp *f = (funcp *) lt_dlsym (handle, fname);
+  int   *v = (int *)   lt_dlsym (handle, vname);
+
+  if (!f)
+    {
+      fprintf (stderr, "function `%s' not found\n", fname);
+      ++errors;
+      return -1;
+    }
+  if (!v)
+    {
+      fprintf (stderr, "variable `%s' not found\n", vname);
+      ++errors;
+      return -1;
+    }
+  return f (*v);
+}
+
+void
+hint_ext (void)
+{
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_ext (&advise))
+    complain ("error setting advise ext");
+
+  handle = moduleopen ("libdepend", advise);
+
+  if (handle)
+    printf ("depend: %d\n", moduletest (handle, "g", "j"));
+
+  lt_dladvise_destroy (&advise);
+}
+
+void
+hint_resident (void)
+{
+  const lt_dlinfo *info;
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_resident (&advise))
+    complain ("error setting advise resident");
+
+  handle = moduleopen ("libresident.la", advise);
+
+  if (handle)
+    {
+      info = lt_dlgetinfo (handle);
+      if (!info->is_resident)
+	complain ("error taking advise resident");
+
+      /* cannot close resident modules */
+      if (lt_dlclose (handle) == 0)
+	complain ("successfully unloaded resident module");
+
+      printf ("resident: %d\n", moduletest (handle, "func", "numb"));
+    }
+
+  lt_dladvise_destroy (&advise);
+}
+
+void
+hint_local (void)
+{
+  const lt_dlinfo *info;
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_local (&advise))
+    complain ("error setting advise local");
+
+  handle = moduleopen ("liblocal.la", advise);
+
+  if (handle)
+    {
+      info = lt_dlgetinfo (handle);
+      printf ("local: %d\n", moduletest (handle, "f", "i"));
+
+      /* If the symlocal hint was taken, don't unload this module
+         and test that our local symbolnames won't clash with modglobal.  */
+      if (!info->is_symlocal && lt_dlclose (handle))
+	complain ("error unloading modlocal");
+    }
+
+  lt_dladvise_destroy (&advise);
+}
+
+void
+hint_global (void)
+{
+  const lt_dlinfo *info;
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_global (&advise))
+    complain ("error setting advise global");
+
+  handle = moduleopen ("libglobal.la", advise);
+
+  if (handle)
+    {
+      info = lt_dlgetinfo (handle);
+      printf ("global: %d\n", moduletest (handle, "f", "i"));
+
+      /* Don't attempt to load moddepend unless modglobal was successfully
+         loaded and the symglobal hint was taken, and the system allows to
+ 	 to have undefined symbols.  */
+      if (info && info->is_symglobal && HAVE_UNDEFINED_SYMBOLS)
+        {
+          hint_ext ();
+        }
+      else
+        {
+          /* Fake the output so the test won't fail when using a dlloader
+             unable to take symglobal hints.  */
+          printf ("depend: 5\n");
+        }
+    }
+
+  lt_dladvise_destroy (&advise);
+}
+
+void
+hint_preload (void)
+{
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_preload (&advise))
+    complain ("error setting advise preload");
+
+  handle = moduleopen ("libpreload.la", advise);
+
+  if (handle)
+    {
+      printf("preload: %d\n", moduletest (handle, "h", "k"));
+    }
+
+  lt_dladvise_destroy (&advise);
+}
+
+int
+main (void)
+{
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (lt_dlinit() != 0)
+    {
+      fprintf (stderr, "error during initialization: %s\n", lt_dlerror());
+      return 1;
+    }
+
+  hint_resident ();
+  hint_local ();
+#ifdef HAVE_SHARED
+  hint_global ();
+#else
+  /* This ugly hack is because we have symbols with the same name in both the
+     global module and the local one, we can't lt_dlopen the local module
+     locally and then later load the global module globally because of this.
+     Instead of skipping the test entirely, we test what we can and
+     have this hack. */
+  printf ("global: 4\n");
+  printf ("depend: 5\n");
+#endif
+  hint_preload ();
+
+  if (lt_dlexit () != 0)
+    complain ("error during exit");
+
+  return (errors != 0);
+}
+]])
+
+AT_DATA([modresident.c],
+[[#ifdef __cplusplus
+extern "C" {
+#endif
+int func (int x) { return x / 3; }
+int numb = 7;
+#ifdef __cplusplus
+}
+#endif
+]])
+
+AT_DATA([modlocal.c],
+[[#ifdef __cplusplus
+extern "C" {
+#endif
+int f (int x) { return (x * x) / 10; }
+int i = 6;
+#ifdef __cplusplus
+}
+#endif
+]])
+
+AT_DATA([modglobal.c],
+[[#ifdef __cplusplus
+extern "C" {
+#endif
+int f (int x) { return x - 1; }
+int i = 5;
+#ifdef __cplusplus
+}
+#endif
+]])
+
+AT_DATA([moddepend.c],
+[[#ifdef __cplusplus
+extern "C" {
+#endif
+extern int f (int), i;
+int g (int x) { return f (i) + x - 3; }
+int j = 4;
+#ifdef __cplusplus
+}
+#endif
+]])
+
+AT_DATA([modpreload.c],
+[[#ifdef __cplusplus
+extern "C" {
+#endif
+int h (int x) { return 2 * x; }
+int k = 3;
+#ifdef __cplusplus
+}
+#endif
+]])
+
+LT_AT_HOST_DATA([expout],
+[[resident: 2
+local: 3
+global: 4
+depend: 5
+preload: 6
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+
+dlopenable='resident local global'
+dlpreloadable='preload'
+
+# ------------------------------------------------------------------------- #
+# The depend test makes no sense unless compiled without -no-undefined. By  #
+# not building the depend module in that case, when this test passes we can #
+# be sure that hint_global() above, is being correctly informed those hosts #
+# are reporting not able to accept the global hint to lt_dlopenadvise().    #
+# ------------------------------------------------------------------------- #
+
+have_shared=false
+$LIBTOOL --features | grep 'enable shared libraries' >/dev/null && have_shared=:
+
+case $host_os,$have_shared in
+cygwin* | mingw* | cegcc* | *,false)
+  # These hosts do not support linking without -no-undefined
+  CPPFLAGS="$CPPFLAGS -DHAVE_UNDEFINED_SYMBOLS=0"
+  ;;
+*)
+  CPPFLAGS="$CPPFLAGS -DHAVE_UNDEFINED_SYMBOLS=1"
+  dlopenable="$dlopen depend"
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c moddepend.c
+  AT_CHECK([$LIBTOOL --mode=link $CC -module $CFLAGS $LDFLAGS -o libdepend.la ]dnl
+           [moddepend.lo -rpath /foo -avoid-version], [], [ignore], [ignore])
+  ;;
+esac
+
+$have_shared && CPPFLAGS="$CPPFLAGS -DHAVE_SHARED"
+
+# ------------------------------------------------------------------------- #
+# Other modules can be tested correctly even when built with -no-undefined. #
+# ------------------------------------------------------------------------- #
+
+LDFLAGS="$LDFLAGS -no-undefined"
+
+$CC $CPPFLAGS $CFLAGS -c main.c
+for name in resident local global preload; do
+  # FIXME: adding -static to libpreload shouldn't be necessary.
+  #        Fix this properly in ltmain, then remove this workaround.
+  if test $name = preload; then
+    st=-static
+  else
+    st=
+  fi
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c mod$name.c
+  AT_CHECK([$LIBTOOL --mode=link $CC -module $CFLAGS $LDFLAGS -o lib$name.la ]dnl
+           [mod$name.lo $st -rpath /foo -avoid-version], [], [ignore], [ignore])
+done
+
+preloaded=
+for module in $dlpreloadable; do
+  preloaded="${preloaded+$preloaded }-dlpreopen lib$module.la"
+done
+
+modules=
+for module in $dlopenable; do
+  modules="${modules+$modules }-dlopen lib$module.la"
+done
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT $preloaded $modules $LIBLTDL],
+	 [], [ignore], [ignore])
+
+# Remove loadable libpreload module, so we know it is the preloaded module
+# that is being executed by a successful test invocation:
+AT_CHECK([$LIBTOOL --mode=clean rm -f libpreload.la], [], [ignore], [ignore])
+
+LT_AT_NOINST_EXEC_CHECK([./main], [$modules], [], [expout], [])
+
+AT_CLEANUP
diff --git a/tests/lt_dlexit.at b/tests/lt_dlexit.at
new file mode 100644
index 0000000..9441f8a
--- /dev/null
+++ b/tests/lt_dlexit.at
@@ -0,0 +1,164 @@
+# lt_dlexit.at -- test libltdl functionality                  -*- Autotest -*-
+#
+#   Copyright (C) 2007, 2008, 2010 Free Software Foundation, Inc.
+#   Written by Dave Brolley & Ralf Wildenhues, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Try to keep the new interfaces of HEAD separate from those of
+# branch-1-5 to facilitate testing of older releases.
+
+AT_BANNER([Libltdl functionality.])
+
+AT_SETUP([lt_dlexit unloading libs])
+AT_KEYWORDS([libltdl])
+
+# Test for
+# http://lists.gnu.org/archive/html/bug-libtool/2007-01/msg00014.html
+# http://lists.gnu.org/archive/html/bug-libtool/2008-03/msg00013.html
+
+AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+#include <string.h>
+
+typedef int (*pfun_T) (int);
+typedef int *pvar_T;
+
+/* lt_dlopen wrapper */
+static lt_dlhandle
+xdlopen (const char *filename)
+{
+  lt_dlhandle handle = lt_dlopen (filename);
+  if (!handle) {
+    fprintf (stderr, "can't open the module %s!\n", filename);
+    fprintf (stderr, "error was: %s\n", lt_dlerror());
+  }
+  return handle;
+}
+
+/* lt_dlsym wrapper: try one function and one variable */
+static int
+xdlsymtest (lt_dlhandle handle, const char *func, const char *var)
+{
+  pfun_T pf = (pfun_T) lt_dlsym (handle, func);
+  pvar_T pv = (pvar_T) lt_dlsym (handle, var);
+  if (pf == NULL) {
+    fprintf (stderr, "function `%s' not found\n", func);
+    return 1;
+  }
+  if (pv == NULL) {
+    fprintf (stderr, "variable `%s' not found\n", var);
+    return 1;
+  }
+  return (*pf) (*pv);
+}
+
+int
+main (void)
+{
+  lt_dlhandle b1;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during initialization: %s\n", lt_dlerror());
+    return 1;
+  }
+  if (lt_dlexit() != 0) {
+    fprintf (stderr, "error during first lt_dlexit: %s\n", lt_dlerror());
+    return 1;
+  }
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during second initialization: %s\n", lt_dlerror());
+    return 1;
+  }
+  if (!(b1 = xdlopen ("modb1.la"))) return 1;
+  if (xdlsymtest (b1, "fb1", "vb1")) return 1;
+  /* do not lt_dlclose here on purpose.  */
+
+  if (lt_dlexit() != 0) {
+    fprintf (stderr, "error during exit: %s\n", lt_dlerror());
+    return 1;
+  }
+  return 0;
+}
+]])
+
+
+AT_DATA([a1.c],
+[[#ifdef __cplusplus
+extern "C" {
+#endif
+int f1 (int x) { return x - 1; }
+int v1 = 1;
+#ifdef __cplusplus
+}
+#endif
+]])
+
+AT_DATA([b1.c],
+[[#ifdef __cplusplus
+extern "C" {
+#endif
+#if defined DLL_EXPORT && defined _WIN32 && defined _MSC_VER
+#  define LIBA1_SCOPE extern __declspec (dllimport)
+#endif
+#if !defined LIBA1_SCOPE
+#  define LIBA1_SCOPE extern
+#endif
+LIBA1_SCOPE int f1 (int);
+LIBA1_SCOPE int v1;
+int fb1 (int x) { return f1 (v1) + x - 3; }
+int vb1 = 3;
+#ifdef __cplusplus
+}
+#endif
+]])
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+
+for file in a1 b1; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file.c
+done
+$CC $CPPFLAGS $CFLAGS -c main.c
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba1.la a1.lo \
+          -rpath /foo -avoid-version], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o modb1.la b1.lo \
+          -rpath /foo -module -avoid-version liba1.la], [], [ignore], [ignore])
+
+# TODO: test -dlpreopen
+for dlopen in -dlopen; do
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT \
+           $dlopen modb1.la $LIBLTDL], [], [ignore], [ignore])
+  LT_AT_NOINST_EXEC_CHECK([./main], [-dlopen modb1.la])
+done
+
+AT_CLEANUP
diff --git a/tests/lt_dlopen.at b/tests/lt_dlopen.at
new file mode 100644
index 0000000..0aae2f8
--- /dev/null
+++ b/tests/lt_dlopen.at
@@ -0,0 +1,103 @@
+# lt_dlopen.at -- test libltdl functionality                -*- Autotest -*-
+#
+#   Copyright (C) 2009 Free Software Foundation, Inc.
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([lt_dlopen error messages])
+AT_KEYWORDS([libltdl])
+
+# The bug is not fixed:
+AT_XFAIL_IF([:])
+
+# This test only works if the system allows undefined symbols.
+eval `$LIBTOOL --config | grep '^allow_undefined_flag='`
+AT_CHECK([test unsupported != "$allow_undefined_flag" || exit 77])
+
+AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle plugin_handle;
+
+  if (argc < 2)
+    {
+      fprintf (stderr, "usage: %s plugin\n", argv[0]);
+      return 1;
+    }
+
+  lt_dlinit ();
+  plugin_handle = lt_dlopenext (argv[1]);
+  if (NULL != plugin_handle)
+    {
+      printf ("plugin opened successfully!\n");
+      lt_dlclose (plugin_handle);
+    }
+  else
+    {
+      printf ("plugin failed to open: %s\n", lt_dlerror());
+      err = 1;
+    }
+  lt_dlexit ();
+  return err;
+}
+]])
+
+AT_DATA([good-plugin.c],
+[[int foo;
+int *i = &foo;
+]])
+
+AT_DATA([missing-symbol-plugin.c],
+[[/* On systems that allow undefined symbols, this will compile,
+     but the symbol "foo" won't be found at runtime */
+extern int foo;
+int *i = &foo;
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+inst=`pwd`/inst
+libdir=$inst/lib
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c main.c], [], [ignore], [ignore])
+for file in good-plugin.c missing-symbol-plugin.c; do
+  AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file],
+	   [], [ignore], [ignore])
+done
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o good-plugin.la -rpath $libdir ]dnl
+	 [-module -avoid-version good-plugin.lo], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o missing-symbol-plugin.la -rpath $libdir]dnl
+	 [-module -avoid-version missing-symbol-plugin.lo], [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ]dnl
+	 [-dlopen good-plugin.la -dlopen missing-symbol-plugin.la $LIBLTDL],
+	 [], [ignore], [ignore])
+
+LT_AT_EXEC_CHECK([./main], [], [ignore], [ignore], [./good-plugin.la])
+LT_AT_EXEC_CHECK([./main], [1], [ignore], [stderr], [./missing-symbol-plugin.la])
+AT_CHECK([grep 'missing symbol' stderr], [], [ignore])
+
+AT_CLEANUP
diff --git a/tests/lt_dlopen_a.at b/tests/lt_dlopen_a.at
new file mode 100644
index 0000000..4844d06
--- /dev/null
+++ b/tests/lt_dlopen_a.at
@@ -0,0 +1,97 @@
+# lt_dlopen_a.at -- test libltdl functionality                -*- Autotest -*-
+#
+#   Copyright (C) 2009 Free Software Foundation, Inc.
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([lt_dlopen archive])
+AT_KEYWORDS([libltdl lt_dlopen_a])
+
+AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+
+/* This dlopen() in the main executable should override any dlopen()s in
+   shared libraries etc.
+
+   If that is not the case (or the platform does not use dlopen()) then this
+   test should exit 77, causing the test to SKIP.
+*/
+static int retcde = 77;
+
+void * dlopen(const char *path, int mode) {
+  if (!(strcmp(path,"plugin.a") && strcmp(path,"plugin.lib")))
+    {
+      fprintf(stderr,"Tried to open archive %s\n",path);
+      retcde = 1;
+    }
+  else
+    {
+      fprintf(stderr,"Opening ... %s\n", path);
+      if (retcde == 77) retcde = 0;
+    }
+  return NULL;
+}
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle plugin_handle;
+
+  lt_dlinit ();
+  plugin_handle = lt_dlopenext (argv[1]);
+  lt_dlexit ();
+  return retcde;
+}
+]])
+
+AT_DATA([plugin.c],
+[[
+int i = 1;
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c main.c || exit 77],[],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c plugin.c || exit 77],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o plugin.la -rpath ]dnl
+	 [$libdir -module -no-undefined -avoid-version plugin.lo || exit 77],
+	 [], [ignore], [ignore])
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT ]dnl
+	 [main.$OBJEXT -dlopen plugin.la $LIBLTDL || exit 77],
+	 [], [ignore], [ignore])
+
+mkdir -p $libdir
+mkdir -p $bindir
+
+AT_CHECK([$LIBTOOL --mode=install cp plugin.la $libdir],[], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp main$EXEEXT $bindir],[], [ignore], [ignore])
+AT_CHECK([test -f $libdir/plugin.a || exit 77])
+LT_AT_EXEC_CHECK([$bindir/main], [], [ignore], [ignore],[$libdir/plugin.la])
+
+AT_CLEANUP
diff --git a/tests/lt_dlopenext.at b/tests/lt_dlopenext.at
new file mode 100644
index 0000000..6631124
--- /dev/null
+++ b/tests/lt_dlopenext.at
@@ -0,0 +1,251 @@
+# lt_dlopenext.at -- test libltdl functionality             -*- Autotest -*-
+#
+#   Copyright (C) 2009, 2010 Free Software Foundation, Inc.
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([lt_dlopenext error messages])
+AT_KEYWORDS([libltdl])
+
+# This test requires shared library support.
+AT_CHECK([$LIBTOOL --features | grep 'enable shared libraries' || exit 77],
+	 [], [ignore])
+
+prefix=`pwd`/inst
+libdir=$prefix/lib
+bindir=$prefix/bin
+mkdir $prefix $libdir $bindir
+
+# This code is copied from the Autobook:
+# <http://sources.redhat.com/autobook/autobook/autobook_169.html>
+# so if it needs changes, be sure to notify the Autobook authors
+# about them.
+
+AT_DATA([simple-module.c],
+[[
+#include <stdio.h>
+
+#ifdef __cplusplus
+extern "C"
+#endif
+int
+run (const char *argument)
+{
+  printf ("Hello, %s!\n", argument);
+  return 0;
+}
+]])
+
+AT_DATA([ltdl-loader.c],
+[[
+#include <stdio.h>
+#include <stdlib.h>
+#ifndef EXIT_FAILURE
+#  define EXIT_FAILURE        1
+#  define EXIT_SUCCESS        0
+#endif
+
+#include <limits.h>
+#ifndef PATH_MAX
+#  define PATH_MAX 255
+#endif
+
+#include <string.h>
+#include <ltdl.h>
+
+#ifndef MODULE_PATH_ENV
+#  define MODULE_PATH_ENV        "MODULE_PATH"
+#endif
+
+typedef int entrypoint (const char *argument);
+
+/* Save and return a copy of the dlerror() error  message,
+   since the next API call may overwrite the original. */
+static char *dlerrordup (char *errormsg);
+
+int
+main (int argc, const char *argv[])
+{
+  char *errormsg = NULL;
+  lt_dlhandle module = NULL;
+  entrypoint *run = NULL;
+  int errors = 0;
+
+  if (argc != 3)
+    {
+      fprintf (stderr, "USAGE: main MODULENAME ARGUMENT\n");
+      exit (EXIT_FAILURE);
+    }
+
+  /* Initialise libltdl. */
+  errors = lt_dlinit ();
+
+  /* Set the module search path. */
+  if (!errors)
+    {
+      const char *path = getenv (MODULE_PATH_ENV);
+
+      if (path != NULL)
+        errors = lt_dlsetsearchpath (path);
+    }
+
+  /* Load the module. */
+  if (!errors)
+    module = lt_dlopenext (argv[1]);
+
+  /* Find the entry point. */
+  if (module)
+    {
+      run = (entrypoint *) lt_dlsym (module, "run");
+
+      /* In principle, run might legitimately be NULL, so
+         I don't use run == NULL as an error indicator
+         in general. */
+      errormsg = dlerrordup (errormsg);
+      if (errormsg != NULL)
+        {
+          errors = lt_dlclose (module);
+          module = NULL;
+        }
+    }
+  else
+    errors = 1;
+
+  /* Call the entry point function. */
+  if (!errors)
+    {
+      int result = (*run) (argv[2]);
+      if (result < 0)
+        errormsg = strdup ("module entry point execution failed");
+      else
+        printf ("\t=> %d\n", result);
+    }
+
+  /* Unload the module, now that we are done with it. */
+  if (!errors)
+    errors = lt_dlclose (module);
+
+  if (errors)
+    {
+      /* Diagnose the encountered error. */
+      errormsg = dlerrordup (errormsg);
+
+      if (!errormsg)
+        {
+          fprintf (stderr, "%s: dlerror() failed.\n", argv[0]);
+          return EXIT_FAILURE;
+        }
+    }
+
+  /* Finished with ltdl now. */
+  if (!errors)
+    if (lt_dlexit () != 0)
+      errormsg = dlerrordup (errormsg);
+
+  if (errormsg)
+    {
+      fprintf (stderr, "%s: %s.\n", argv[0], errormsg);
+      free (errormsg);
+      exit (EXIT_FAILURE);
+    }
+
+  return EXIT_SUCCESS;
+}
+
+/* Be careful to save a copy of the error message,
+   since the  next API call may overwrite the original. */
+static char *
+dlerrordup (char *errormsg)
+{
+  char *error = (char *) lt_dlerror ();
+  if (error && !errormsg)
+    errormsg = strdup (error);
+  return errormsg;
+}
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c simple-module.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o simple-module.la ]dnl
+	 [simple-module.lo -rpath $libdir -module -avoid-version],
+	 [], [ignore], [ignore])
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c ltdl-loader.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o ltdl-loader$EXEEXT ]dnl
+	 [ltdl-loader.$OBJEXT -dlopen self $LIBLTDL],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp simple-module.la $libdir/simple-module.la], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=clean rm -f simple-module.la], [], [ignore], [ignore])
+
+# Try finding the module with and without the .la file, with absolute
+# path, relative path, or one of the path variables.  Do not override
+# $PATH for w32, see shlibpath.at for the hacks this requires.
+#
+# Finding the module without the .la file will not work if MODULE_EXT
+# aka. shared_ext is empty.
+
+eval `$LIBTOOL --config | $EGREP '^(shlibpath_var|shrext_cmds)='`
+
+module=no
+eval shared_ext=\"$shrext_cmds\"
+if test -n "$shared_ext"; then
+  have_lafile="with without"
+else
+  have="with"
+fi
+
+if test "$shlibpath_var" = PATH; then
+  $unset shlibpath_var || shlibpath_var=
+fi
+
+for lafile in $have_lafile; do
+  if test $lafile = without; then
+    rm $libdir/simple-module.la
+  fi
+
+  for dir in inst/lib "$libdir"; do
+    LT_AT_EXEC_CHECK([./ltdl-loader], [], [stdout], [ignore],
+		     [$dir/simple-module World])
+    AT_CHECK([grep "Hello, World" stdout], [], [ignore])
+
+    for var in MODULE_PATH LTDL_LIBRARY_PATH $shlibpath_var
+    do
+      eval $var=\$dir
+      export $var
+      LT_AT_EXEC_CHECK([./ltdl-loader], [], [stdout], [ignore],
+		       [simple-module World])
+      AT_CHECK([grep "Hello, World" stdout], [], [ignore])
+      $unset $var || eval $var=
+    done
+  done
+done
+
+AT_CLEANUP
diff --git a/tests/ltdl-api.at b/tests/ltdl-api.at
new file mode 100644
index 0000000..465a513
--- /dev/null
+++ b/tests/ltdl-api.at
@@ -0,0 +1,39 @@
+# ltdl-api.at -- test libltdl API                -*- Autotest -*-
+#
+#   Copyright (C) 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2008.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([ltdl API])
+AT_KEYWORDS([libltdl])
+
+# Ensure that no symbols from argz are unrenamed.
+eval `$LIBTOOL --config | $EGREP '^(NM|global_symbol_pipe|objext)='`
+argz_o=$abs_top_builddir/libltdl/argz.$objext
+AT_CHECK([test -f "$argz_o" || exit 77])
+AT_CHECK([eval "$NM \"\$argz_o\" | $global_symbol_pipe"],
+	 [], [stdout], [ignore])
+# Check for global symbols beginning with "argz_"
+AT_CHECK([grep "^T argz_" stdout], [1])
+# and also for the _ prefixed version "_argz_"
+AT_CHECK([grep "^T _argz_" stdout], [1])
+
+AT_CLEANUP
diff --git a/tests/ltdl-libdir.at b/tests/ltdl-libdir.at
new file mode 100644
index 0000000..01c9e70
--- /dev/null
+++ b/tests/ltdl-libdir.at
@@ -0,0 +1,124 @@
+# ltdl-libdir.at -- test libltdl functionality             -*- Autotest -*-
+#
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([libdir of installed modules])
+AT_KEYWORDS([libltdl])
+
+# This test requires shared library support.
+AT_CHECK([$LIBTOOL --features | grep 'enable shared libraries' || exit 77],
+	 [], [ignore])
+
+# With MinGW, try Windows-style paths only.
+if pwd -W >/dev/null 2>&1; then
+  prefix=`pwd -W`/inst
+else
+  prefix=`pwd`/inst
+fi
+libdir=$prefix/lib
+bindir=$prefix/bin
+mkdir $prefix $libdir $bindir
+
+AT_DATA([a.c],
+[[#ifdef __cplusplus
+extern "C"
+#endif
+int f (void)
+{
+  return 42;
+}
+]])
+
+AT_DATA([m.c],
+[[
+#include <stdio.h>
+#include <ltdl.h>
+
+typedef int func_f(void);
+
+int
+main (int argc, const char *argv[])
+{
+  lt_dlhandle module = NULL;
+  func_f *f = NULL;
+
+  if (lt_dlinit()) {
+    fprintf(stderr, "lt_dlinit failed '%s'\n", lt_dlerror());
+    return 1;
+  }
+
+  module = lt_dlopen("./a.la");
+
+  if (!module) {
+    fprintf(stderr, "lt_dlopen failed '%s'\n", lt_dlerror());
+    return 1;
+  }
+
+  f = (func_f *)lt_dlsym(module, "f");
+
+  if (!f) {
+    fprintf(stderr, "lt_dlsym failed '%s'\n", lt_dlerror());
+    return 1;
+  }
+
+  if (f() != 42) {
+    fprintf(stderr, "f did not return 42\n");
+    return 1;
+  }
+
+  lt_dlclose(module);
+  lt_dlexit();
+  return 0;
+}
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip installcheck if --disable-ltdl-install was used.
+AT_CHECK([test -f "$LIBLTDL" || exit 77])
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o a.la ]dnl
+	 [a.lo -rpath $libdir -module -shared -avoid-version],
+	 [], [ignore], [ignore])
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c m.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT ]dnl
+	 [m.$OBJEXT $LIBLTDL],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp a.la $libdir/a.la],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp m$EXEEXT $bindir/m$EXEEXT],
+	 [], [ignore], [ignore])
+
+# Try finding the module via the libdir entry in a misplaced .la file.
+
+mv $libdir/a.la $bindir/a.la
+cd $bindir
+LT_AT_EXEC_CHECK([./m],
+		 [], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/mdemo-conf.test b/tests/mdemo-conf.test
new file mode 100755
index 0000000..5742af0
--- /dev/null
+++ b/tests/mdemo-conf.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# mdemo-conf.test - try configuring the mdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/mdemo"
+func_make_distclean
+func_configure
+func_check_static_shared "yes" "yes"
+
+exit 0
diff --git a/tests/mdemo-dryrun.test b/tests/mdemo-dryrun.test
new file mode 100755
index 0000000..678891d
--- /dev/null
+++ b/tests/mdemo-dryrun.test
@@ -0,0 +1,116 @@
+#! /bin/sh
+# mdemo-dryrun.test - check whether the --dry-run mode works properly
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "mdemo-conf" "tests/mdemo/Makefile"
+
+func_mkprefixdir
+func_cd "tests/mdemo"
+func_make "clean"
+
+# create `before' and `after' in a directory deep within objdir,
+# so that their creation and removal does not modify even a timestamp
+# in the output of `ls -l . $objdir'
+func_mkdir_p "$objdir/temp/temp"
+before=$objdir/temp/temp/before
+after=$objdir/temp/temp/after
+
+# Create a new libtool script that will enter dry run if the environment
+# variable force_dry_run is set
+rm -f $objdir/libtool.new
+sed 's/^opt_dry_run=.*$/opt_dry_run=${force_dry_run-false}/' < libtool > $objdir/libtool.new
+chmod +x $objdir/libtool.new
+mv libtool $objdir/libtool
+mv $objdir/libtool.new libtool
+
+# main.o is not compiled with libtool, but it depends on it, so make
+# sure it is up-to-date.  libfoo2.la is linked with libsub.la, so make
+# sure it exists, otherwise libtool will complain.
+func_make main.$objext
+
+func_msg "Making object files in mdemo (dry run)"
+# ls -l in MSYS sometimes shows year, not time, for really fresh files.
+sleep 1
+ls -l . $objdir | grep -v total > $before
+force_dry_run=: $MAKE foo1.lo foo2.lo sub.lo || exit $?
+ls -l . $objdir | grep -v total > $after
+cmp $before $after > /dev/null || exit 1
+# Now really make them
+func_make foo1.lo foo2.lo libsub.la
+
+func_msg "Making libraries in mdemo (dry run)"
+# ls -l in MSYS sometimes shows year, not time, for really fresh files.
+sleep 1
+ls -l . $objdir | grep -v total > $before
+force_dry_run=: $MAKE foo1.la libfoo2.la || exit $?
+ls -l . $objdir | grep -v total > $after
+cmp $before $after > /dev/null || exit 1
+# Now really make them
+func_make foo1.la libfoo2.la
+
+func_msg "Making programs in ../mdemo (dry run)"
+# ls -l in MSYS sometimes shows year, not time, for really fresh files.
+sleep 1
+ls -l . $objdir | grep -v total > $before
+force_dry_run=: $MAKE mdemo$EXEEXT mdemo_static$EXEEXT 1>&2 || exit $?
+ls -l . $objdir | grep -v total > $after
+cmp $before $after > /dev/null || exit 1
+# Now really make them
+func_make mdemo$EXEEXT mdemo_static$EXEEXT
+
+func_msg "Running $MAKE install in ../mdemo (dry run)"
+# Libtool does not create these directories
+func_mkdir_p "$prefix/bin"
+func_mkdir_p "$prefix/lib"
+# ls -l in MSYS sometimes shows year, not time, for really fresh files.
+sleep 1
+ls -l . $objdir | grep -v total > $before
+ls -lR $prefix | grep -v total >> $before
+force_dry_run=: $MAKE install 1>&2 || exit 1
+ls -l . $objdir | grep -v total > $after
+ls -lR $prefix | grep -v total >> $after
+cmp $before $after > /dev/null || exit 1
+# Now really run it
+func_make install
+
+func_msg "Running $MAKE uninstall in ../mdemo (dry run)"
+# Libtool does not uninstall the programs, remove them first
+rm -f "$prefix/bin/mdemo$EXEEXT" "$prefix/bin/mdemo_static$EXEEXT"
+# ls -l in MSYS sometimes shows year, not time, for really fresh files.
+sleep 1
+ls -l . $objdir | grep -v total > $before
+ls -lR $prefix | grep -v total >> $before
+force_dry_run=: $MAKE uninstall 1>&2 || exit $?
+ls -l . $objdir | grep -v total > $after
+ls -lR $prefix | grep -v total >> $after
+cmp $before $after > /dev/null || exit 1
+# Now really run it
+func_make uninstall
+
+rm -f $before $after libtool
+mv $objdir/libtool libtool
+
+exit 0
diff --git a/tests/mdemo-exec.test b/tests/mdemo-exec.test
new file mode 100755
index 0000000..ee3014e
--- /dev/null
+++ b/tests/mdemo-exec.test
@@ -0,0 +1,39 @@
+#! /bin/sh
+# mdemo-exec.test - check that programs in the mdemo subdirectory are viable
+#
+#   Copyright (C) 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "mdemo-make" "tests/mdemo/mdemo$EXEEXT"
+
+func_rmprefixdir
+func_exec_init "uninstalled"
+func_exec "tests/mdemo/mdemo_static$EXEEXT tests/mdemo/foo1.la tests/mdemo/libfoo2.la" \
+	  "try_iterate: .*libfoo2"
+func_exec "tests/mdemo/mdemo$EXEEXT tests/mdemo/foo1.la tests/mdemo/libfoo2.la" \
+	  "try_iterate: .*libfoo2"
+func_exec "tests/mdemo/mdemo_static$EXEEXT `pwd`/tests/mdemo/foo1.la `pwd`/tests/mdemo/libfoo2.la"
+func_exec "tests/mdemo/mdemo$EXEEXT `pwd`/tests/mdemo/foo1.la `pwd`/tests/mdemo/libfoo2.la"
+
+exit $exec_status
diff --git a/tests/mdemo-inst.test b/tests/mdemo-inst.test
new file mode 100755
index 0000000..d611836
--- /dev/null
+++ b/tests/mdemo-inst.test
@@ -0,0 +1,37 @@
+#! /bin/sh
+# mdemo-inst.test - try installing from the mdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "mdemo-make" "tests/mdemo/mdemo$EXEEXT"
+
+func_mkprefixdir
+func_cd "tests/mdemo"
+func_make "install"
+func_exec_init "installed"
+func_exec "$prefix/bin/mdemo_static$EXEEXT $prefix/lib/foo1.la $prefix/lib/libfoo2.la"
+func_exec "$prefix/bin/mdemo$EXEEXT $prefix/lib/foo1.la $prefix/lib/libfoo2.la"
+
+exit $status
diff --git a/tests/mdemo-make.test b/tests/mdemo-make.test
new file mode 100755
index 0000000..29c4cd4
--- /dev/null
+++ b/tests/mdemo-make.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# mdemo-make.test - try building in the mdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "mdemo-conf" "tests/mdemo/Makefile"
+
+func_rmprefixdir
+func_cd "tests/mdemo"
+func_make
+
+exit 0
diff --git a/tests/mdemo-shared-exec.test b/tests/mdemo-shared-exec.test
new file mode 100755
index 0000000..d20ae64
--- /dev/null
+++ b/tests/mdemo-shared-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/mdemo-exec.test
diff --git a/tests/mdemo-shared-inst.test b/tests/mdemo-shared-inst.test
new file mode 100755
index 0000000..81e7b60
--- /dev/null
+++ b/tests/mdemo-shared-inst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/mdemo-inst.test
diff --git a/tests/mdemo-shared-make.test b/tests/mdemo-shared-make.test
new file mode 100755
index 0000000..490230e
--- /dev/null
+++ b/tests/mdemo-shared-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/mdemo-make.test
diff --git a/tests/mdemo-shared-unst.test b/tests/mdemo-shared-unst.test
new file mode 100755
index 0000000..6f1cbae
--- /dev/null
+++ b/tests/mdemo-shared-unst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/mdemo-unst.test
diff --git a/tests/mdemo-shared.test b/tests/mdemo-shared.test
new file mode 100755
index 0000000..fb32764
--- /dev/null
+++ b/tests/mdemo-shared.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# mdemo-shared.test - try configuring the mdemo subdirectory for shared libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/mdemo"
+func_make_distclean
+func_configure "--disable-static"
+func_check_static_shared "no" "yes"
+
+exit 0
diff --git a/tests/mdemo-static-exec.test b/tests/mdemo-static-exec.test
new file mode 100755
index 0000000..d20ae64
--- /dev/null
+++ b/tests/mdemo-static-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/mdemo-exec.test
diff --git a/tests/mdemo-static-inst.test b/tests/mdemo-static-inst.test
new file mode 100755
index 0000000..81e7b60
--- /dev/null
+++ b/tests/mdemo-static-inst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/mdemo-inst.test
diff --git a/tests/mdemo-static-make.test b/tests/mdemo-static-make.test
new file mode 100755
index 0000000..490230e
--- /dev/null
+++ b/tests/mdemo-static-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/mdemo-make.test
diff --git a/tests/mdemo-static-unst.test b/tests/mdemo-static-unst.test
new file mode 100755
index 0000000..6f1cbae
--- /dev/null
+++ b/tests/mdemo-static-unst.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/mdemo-unst.test
diff --git a/tests/mdemo-static.test b/tests/mdemo-static.test
new file mode 100755
index 0000000..5df535d
--- /dev/null
+++ b/tests/mdemo-static.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# mdemo-static.test - try configuring the mdemo subdirectory for static libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/mdemo"
+func_make_distclean
+func_configure "--disable-shared"
+func_check_static_shared "yes" "no"
+
+exit 0
diff --git a/tests/mdemo-unst.test b/tests/mdemo-unst.test
new file mode 100755
index 0000000..e808e31
--- /dev/null
+++ b/tests/mdemo-unst.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# mdemo-unst.test - try uninstalling in the mdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "mdemo-inst" "$prefix/bin/mdemo$EXEEXT" "tests/mdemo/Makefile"
+
+func_mkprefixdir
+func_cd "tests/mdemo"
+func_make_uninstall
+
+exit 0
diff --git a/tests/mdemo/Makefile.am b/tests/mdemo/Makefile.am
new file mode 100644
index 0000000..f73fc9b
--- /dev/null
+++ b/tests/mdemo/Makefile.am
@@ -0,0 +1,89 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005, 2007, 2008 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS  = -I ../../libltdl/m4
+AM_CPPFLAGS	 = -I$(top_srcdir)/../.. $(INCLTDL)
+
+lib_LTLIBRARIES = libsub.la foo1.la libfoo2.la libmlib.la
+
+foo1_la_SOURCES = foo1.c
+foo1_la_LIBADD = $(LIBM) libsub.la
+foo1_la_LDFLAGS = -no-undefined -module -avoid-version
+
+libfoo2_la_SOURCES = foo2.c
+libfoo2_la_LIBADD = $(LIBM) libsub.la
+libfoo2_la_LDFLAGS = -no-undefined -module -export-symbols-regex "libfoo2.*"
+
+libsub_la_SOURCES = sub.c
+libsub_la_LDFLAGS = -no-undefined
+
+## Use -export-symbols-regex here explicitly because libltdl marks
+## its exported symbols, and we use libltdl as a convenience archive.
+## Thus, on w32, auto-exporting is turned off.
+libmlib_la_SOURCES = mlib.c
+libmlib_la_LIBADD = @LIBLTDL@ "-dlopen" foo1.la "-dlopen" libfoo2.la
+libmlib_la_LDFLAGS = -no-undefined -export-symbols-regex ".*"
+libmlib_la_DEPENDENCIES = @LIBLTDL@ libsub.la foo1.la libfoo2.la
+
+noinst_HEADERS = foo.h
+
+bin_PROGRAMS = mdemo mdemo_static
+
+## use @LIBLTDL@ because some broken makes do not accept macros in targets
+## we can only do this because our LIBLTDL does not contain ${top_builddir}
+top_distdir = ../..
+@LIBLTDL@: $(top_distdir)/libtool \
+    $(top_distdir)/config.h $(srcdir)/$(top_distdir)/libltdl/ltdl.c \
+    $(srcdir)/$(top_distdir)/libltdl/ltdl.h
+	(cd $(top_distdir); $(MAKE) `echo $(LIBLTDL) | sed 's,.*\.\./libltdl/,libltdl/,g'`)
+# Do not error out if toplevel config.h does not exist:
+$(top_distdir)/config.h:
+
+# Create a version of mdemo that does dlopen.
+mdemo_SOURCES = main.c
+mdemo_LDFLAGS = -export-dynamic
+## The quotes around -dlopen below fool automake into accepting it
+mdemo_LDADD = @LIBLTDL@ libsub.la "-dlopen" self \
+		"-dlopen" foo1.la "-dlopen" libfoo2.la
+mdemo_DEPENDENCIES = @LIBLTDL@ libsub.la foo1.la libfoo2.la
+
+# Create a statically linked version of mdemo.
+mdemo_static_SOURCES = $(mdemo_SOURCES)
+mdemo_static_LDFLAGS = $(STATIC) $(mdemo_LDFLAGS)
+mdemo_static_LDADD = $(mdemo_LDADD)
+mdemo_static_DEPENDENCIES = $(mdemo_DEPENDENCIES)
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
diff --git a/tests/mdemo/Makefile.in b/tests/mdemo/Makefile.in
new file mode 100644
index 0000000..eedeb18
--- /dev/null
+++ b/tests/mdemo/Makefile.in
@@ -0,0 +1,813 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = mdemo$(EXEEXT) mdemo_static$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \
+	$(srcdir)/../../libltdl/config/config.guess \
+	$(srcdir)/../../libltdl/config/config.sub \
+	$(srcdir)/../../libltdl/config/install-sh \
+	$(srcdir)/../../libltdl/config/ltmain.sh \
+	$(srcdir)/../../libltdl/config/missing $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	../../libltdl/config/compile ../../libltdl/config/config.guess \
+	../../libltdl/config/config.sub ../../libltdl/config/depcomp \
+	../../libltdl/config/install-sh ../../libltdl/config/ltmain.sh \
+	../../libltdl/config/mdate-sh ../../libltdl/config/missing \
+	../../libltdl/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltdl.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+am__DEPENDENCIES_1 =
+foo1_la_DEPENDENCIES = $(am__DEPENDENCIES_1) libsub.la
+am_foo1_la_OBJECTS = foo1.lo
+foo1_la_OBJECTS = $(am_foo1_la_OBJECTS)
+foo1_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(foo1_la_LDFLAGS) \
+	$(LDFLAGS) -o $@
+libfoo2_la_DEPENDENCIES = $(am__DEPENDENCIES_1) libsub.la
+am_libfoo2_la_OBJECTS = foo2.lo
+libfoo2_la_OBJECTS = $(am_libfoo2_la_OBJECTS)
+libfoo2_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libfoo2_la_LDFLAGS) $(LDFLAGS) -o $@
+am_libmlib_la_OBJECTS = mlib.lo
+libmlib_la_OBJECTS = $(am_libmlib_la_OBJECTS)
+libmlib_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libmlib_la_LDFLAGS) $(LDFLAGS) -o $@
+libsub_la_LIBADD =
+am_libsub_la_OBJECTS = sub.lo
+libsub_la_OBJECTS = $(am_libsub_la_OBJECTS)
+libsub_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libsub_la_LDFLAGS) $(LDFLAGS) -o $@
+PROGRAMS = $(bin_PROGRAMS)
+am_mdemo_OBJECTS = main.$(OBJEXT)
+mdemo_OBJECTS = $(am_mdemo_OBJECTS)
+mdemo_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(mdemo_LDFLAGS) \
+	$(LDFLAGS) -o $@
+am__objects_1 = main.$(OBJEXT)
+am_mdemo_static_OBJECTS = $(am__objects_1)
+mdemo_static_OBJECTS = $(am_mdemo_static_OBJECTS)
+am__DEPENDENCIES_2 = libsub.la "-dlopen" self "-dlopen" foo1.la \
+	"-dlopen" libfoo2.la
+mdemo_static_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(mdemo_static_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(foo1_la_SOURCES) $(libfoo2_la_SOURCES) \
+	$(libmlib_la_SOURCES) $(libsub_la_SOURCES) $(mdemo_SOURCES) \
+	$(mdemo_static_SOURCES)
+DIST_SOURCES = $(foo1_la_SOURCES) $(libfoo2_la_SOURCES) \
+	$(libmlib_la_SOURCES) $(libsub_la_SOURCES) $(mdemo_SOURCES) \
+	$(mdemo_static_SOURCES)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INCLTDL = @INCLTDL@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBLTDL = @LIBLTDL@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTDLDEPS = @LTDLDEPS@
+LTDLINCL = @LTDLINCL@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC = @STATIC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS = -I ../../libltdl/m4
+AM_CPPFLAGS = -I$(top_srcdir)/../.. $(INCLTDL)
+lib_LTLIBRARIES = libsub.la foo1.la libfoo2.la libmlib.la
+foo1_la_SOURCES = foo1.c
+foo1_la_LIBADD = $(LIBM) libsub.la
+foo1_la_LDFLAGS = -no-undefined -module -avoid-version
+libfoo2_la_SOURCES = foo2.c
+libfoo2_la_LIBADD = $(LIBM) libsub.la
+libfoo2_la_LDFLAGS = -no-undefined -module -export-symbols-regex "libfoo2.*"
+libsub_la_SOURCES = sub.c
+libsub_la_LDFLAGS = -no-undefined
+libmlib_la_SOURCES = mlib.c
+libmlib_la_LIBADD = @LIBLTDL@ "-dlopen" foo1.la "-dlopen" libfoo2.la
+libmlib_la_LDFLAGS = -no-undefined -export-symbols-regex ".*"
+libmlib_la_DEPENDENCIES = @LIBLTDL@ libsub.la foo1.la libfoo2.la
+noinst_HEADERS = foo.h
+top_distdir = ../..
+
+# Create a version of mdemo that does dlopen.
+mdemo_SOURCES = main.c
+mdemo_LDFLAGS = -export-dynamic
+mdemo_LDADD = @LIBLTDL@ libsub.la "-dlopen" self \
+		"-dlopen" foo1.la "-dlopen" libfoo2.la
+
+mdemo_DEPENDENCIES = @LIBLTDL@ libsub.la foo1.la libfoo2.la
+
+# Create a statically linked version of mdemo.
+mdemo_static_SOURCES = $(mdemo_SOURCES)
+mdemo_static_LDFLAGS = $(STATIC) $(mdemo_LDFLAGS)
+mdemo_static_LDADD = $(mdemo_LDADD)
+mdemo_static_DEPENDENCIES = $(mdemo_DEPENDENCIES)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+foo1.la: $(foo1_la_OBJECTS) $(foo1_la_DEPENDENCIES) 
+	$(foo1_la_LINK) -rpath $(libdir) $(foo1_la_OBJECTS) $(foo1_la_LIBADD) $(LIBS)
+libfoo2.la: $(libfoo2_la_OBJECTS) $(libfoo2_la_DEPENDENCIES) 
+	$(libfoo2_la_LINK) -rpath $(libdir) $(libfoo2_la_OBJECTS) $(libfoo2_la_LIBADD) $(LIBS)
+libmlib.la: $(libmlib_la_OBJECTS) $(libmlib_la_DEPENDENCIES) 
+	$(libmlib_la_LINK) -rpath $(libdir) $(libmlib_la_OBJECTS) $(libmlib_la_LIBADD) $(LIBS)
+libsub.la: $(libsub_la_OBJECTS) $(libsub_la_DEPENDENCIES) 
+	$(libsub_la_LINK) -rpath $(libdir) $(libsub_la_OBJECTS) $(libsub_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+mdemo$(EXEEXT): $(mdemo_OBJECTS) $(mdemo_DEPENDENCIES) 
+	@rm -f mdemo$(EXEEXT)
+	$(mdemo_LINK) $(mdemo_OBJECTS) $(mdemo_LDADD) $(LIBS)
+mdemo_static$(EXEEXT): $(mdemo_static_OBJECTS) $(mdemo_static_DEPENDENCIES) 
+	@rm -f mdemo_static$(EXEEXT)
+	$(mdemo_static_LINK) $(mdemo_static_OBJECTS) $(mdemo_static_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS)
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
+	dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-libLTLIBRARIES \
+	install-man install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
+	uninstall-am uninstall-binPROGRAMS uninstall-libLTLIBRARIES
+
+@LIBLTDL@: $(top_distdir)/libtool \
+    $(top_distdir)/config.h $(srcdir)/$(top_distdir)/libltdl/ltdl.c \
+    $(srcdir)/$(top_distdir)/libltdl/ltdl.h
+	(cd $(top_distdir); $(MAKE) `echo $(LIBLTDL) | sed 's,.*\.\./libltdl/,libltdl/,g'`)
+# Do not error out if toplevel config.h does not exist:
+$(top_distdir)/config.h:
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/mdemo/README b/tests/mdemo/README
new file mode 100644
index 0000000..936396a
--- /dev/null
+++ b/tests/mdemo/README
@@ -0,0 +1,17 @@
+This is mdemo, an example package that uses GNU libtool with an
+Automake-generated environment to build two simple modules and 
+a program.
+
+It demonstrates how to build both dynamic and static libraries
+that can be dlopened. mdemo uses libtool's portable dlopen
+wrapper called "libltdl". 
+All exported symbols are prefixed with "libname_LTX_" to avoid
+symbols conflicts, especially when linking statically.
+libltdl will automatically cut the prefix off to get the real name.
+
+Note that on Windows, for the purposes of illustrating ltdl, the
+libraries *are* built as dll's, but do not have the __declspec
+machinery to make them suitable for loading at link time.  This is
+only for clarity inside this example, look at the example in ../demo
+to see how the __declspec macros should be set up.
+
diff --git a/tests/mdemo/aclocal.m4 b/tests/mdemo/aclocal.m4
new file mode 100644
index 0000000..799599c
--- /dev/null
+++ b/tests/mdemo/aclocal.m4
@@ -0,0 +1,957 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../libltdl/m4/libtool.m4])
+m4_include([../../libltdl/m4/ltdl.m4])
+m4_include([../../libltdl/m4/ltoptions.m4])
+m4_include([../../libltdl/m4/ltsugar.m4])
+m4_include([../../libltdl/m4/ltversion.m4])
+m4_include([../../libltdl/m4/lt~obsolete.m4])
diff --git a/tests/mdemo/configure b/tests/mdemo/configure
new file mode 100755
index 0000000..7eca124
--- /dev/null
+++ b/tests/mdemo/configure
@@ -0,0 +1,13866 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for mdemo 1.0.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+lt_ltdl_dir='../../libltdl'
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='mdemo'
+PACKAGE_TARNAME='mdemo'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='mdemo 1.0'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="main.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+LIBM
+STATIC
+LIBTOOL_DEPS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+INCLTDL
+LTDLINCL
+LTDLDEPS
+LIBLTDL
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures mdemo 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/mdemo]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of mdemo 1.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+mdemo configure 1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by mdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in ../../libltdl/config "$srcdir"/../../libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../libltdl/config \"$srcdir\"/../../libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='mdemo'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+
+
+
+
+case $enable_ltdl_convenience in
+  no) as_fn_error $? "this package needs a convenience libltdl" "$LINENO" 5 ;;
+  "") enable_ltdl_convenience=yes
+      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+esac
+LIBLTDL='${top_build_prefix}'"${lt_ltdl_dir+$lt_ltdl_dir/}libltdlc.la"
+LTDLDEPS=$LIBLTDL
+LTDLINCL='-I${top_srcdir}'"${lt_ltdl_dir+/$lt_ltdl_dir}"
+
+
+
+
+
+# For backwards non-gettext consistent compatibility...
+INCLTDL="$LTDLINCL"
+
+
+
+
+
+
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+enable_dlopen=yes
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AS+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+  ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+STATIC=""
+test "X$enable_static" = Xyes && STATIC="-static"
+
+
+
+## ---------------------------- ##
+## Libraries required by mdemo. ##
+## ---------------------------- ##
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _mwvalidcheckl in -lmw" >&5
+$as_echo_n "checking for _mwvalidcheckl in -lmw... " >&6; }
+if ${ac_cv_lib_mw__mwvalidcheckl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmw  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char _mwvalidcheckl ();
+int
+main ()
+{
+return _mwvalidcheckl ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_mw__mwvalidcheckl=yes
+else
+  ac_cv_lib_mw__mwvalidcheckl=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mw__mwvalidcheckl" >&5
+$as_echo "$ac_cv_lib_mw__mwvalidcheckl" >&6; }
+if test "x$ac_cv_lib_mw__mwvalidcheckl" = xyes; then :
+  LIBM="-lmw"
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="$LIBM -lm"
+fi
+
+  ;;
+*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="-lm"
+fi
+
+  ;;
+esac
+
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by mdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+mdemo config.status 1.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in AS \
+DLLTOOL \
+OBJDUMP \
+SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Assembler program.
+AS=$lt_AS
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$lt_OBJDUMP
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/tests/mdemo/configure.ac b/tests/mdemo/configure.ac
new file mode 100644
index 0000000..c1a88f2
--- /dev/null
+++ b/tests/mdemo/configure.ac
@@ -0,0 +1,72 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#   Copyright (C) 2001, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AC_PREREQ(2.54)
+
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([mdemo], [1.0], [bug-libtool@gnu.org])
+AC_CONFIG_SRCDIR([main.c])
+AC_CONFIG_AUX_DIR([../../libltdl/config])
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+AC_PROG_CC
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LTDL_CONVENIENCE([../../libltdl])
+AC_SUBST([INCLTDL])
+AC_SUBST([LIBLTDL])
+
+LT_INIT([dlopen win32-dll])
+AC_SUBST(LIBTOOL_DEPS)
+
+STATIC=""
+test "X$enable_static" = Xyes && STATIC="-static"
+AC_SUBST([STATIC])
+
+
+## ---------------------------- ##
+## Libraries required by mdemo. ##
+## ---------------------------- ##
+LT_LIB_M
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/tests/mdemo/foo.h b/tests/mdemo/foo.h
new file mode 100644
index 0000000..8820813
--- /dev/null
+++ b/tests/mdemo/foo.h
@@ -0,0 +1,48 @@
+/* foo.h -- interface to the libfoo* libraries
+
+   Copyright (C) 1998-1999, 2006 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#ifndef _FOO_H_
+#define _FOO_H_ 1
+
+/* __BEGIN_DECLS should be used at the beginning of your declarations,
+   so that C++ compilers don't mangle their names.  Use __END_DECLS at
+   the end of C declarations. */
+#undef __BEGIN_DECLS
+#undef __END_DECLS
+#ifdef __cplusplus
+# define __BEGIN_DECLS extern "C" {
+# define __END_DECLS }
+#else
+# define __BEGIN_DECLS /* empty */
+# define __END_DECLS /* empty */
+#endif
+
+/* Silly constants that the functions return. */
+#define HELLO_RET 0xe110
+#define FOO_RET 0xf00
+
+extern void sub();
+
+#endif /* !_FOO_H_ */
diff --git a/tests/mdemo/foo1.c b/tests/mdemo/foo1.c
new file mode 100644
index 0000000..452ee59
--- /dev/null
+++ b/tests/mdemo/foo1.c
@@ -0,0 +1,61 @@
+/* foo1.c -- trivial test library
+
+   Copyright (C) 1998-1999, 2007 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+#include <math.h>
+
+#define nothing foo1_LTX_nothing
+#define foo1	foo1_LTX_foo1
+#define hello	foo1_LTX_hello
+
+/* Give a global variable definition. */
+int nothing;
+
+/* private function */
+int
+_foo1_helper()
+{
+  sub();
+  return FOO_RET;
+}
+
+/* exported functions */
+__BEGIN_DECLS
+
+int
+foo1()
+{
+  printf ("cos (0.0) = %g\n", (double) cos ((double) 0.0));
+  return _foo1_helper();
+}
+
+int
+hello()
+{
+  printf ("** This is foolib 1 **\n");
+  return HELLO_RET;
+}
+
+__END_DECLS
diff --git a/tests/mdemo/foo2.c b/tests/mdemo/foo2.c
new file mode 100644
index 0000000..e263285
--- /dev/null
+++ b/tests/mdemo/foo2.c
@@ -0,0 +1,61 @@
+/* foo2.c -- trivial test library
+
+   Copyright (C) 1998-1999, 2007 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+#include <math.h>
+
+#define nothing libfoo2_LTX_nothing
+#define foo2	libfoo2_LTX_foo2
+#define hello	libfoo2_LTX_hello
+
+/* Give a global variable definition. */
+int nothing;
+
+/* private function */
+int
+_foo2_helper()
+{
+  sub();
+  return FOO_RET;
+}
+
+/* exported functions */
+__BEGIN_DECLS
+
+int
+foo2()
+{
+  printf ("sin (0.0) = %g\n", (double) sin ((double) 0.0));
+  return _foo2_helper();
+}
+
+int
+hello()
+{
+  printf ("** This is foolib 2 **\n");
+  return HELLO_RET;
+}
+
+__END_DECLS
diff --git a/tests/mdemo/main.c b/tests/mdemo/main.c
new file mode 100644
index 0000000..3a95664
--- /dev/null
+++ b/tests/mdemo/main.c
@@ -0,0 +1,254 @@
+/* main.c -- mdemo test program
+
+   Copyright (C) 1998-2000, 2006, 2007 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include "ltdl.h"
+#include <stdio.h>
+#include <string.h>
+
+LT_BEGIN_C_DECLS
+extern int myfunc (void);
+LT_END_C_DECLS
+
+int
+test_dl (char *filename, int test_ext)
+{
+  lt_dlhandle handle;	
+  const lt_dlinfo *info;
+  int (*pfoo1)() = 0;
+  int (*pfoo2)() = 0;
+  int (*phello)() = 0;
+  int *pnothing = 0;
+  int ret = 0;
+
+  if (test_ext)
+    handle = lt_dlopenext (filename);
+  else
+    handle = lt_dlopen (filename);
+
+  if (!handle) {
+    fprintf (stderr, "can't open the module %s!\n", filename);
+    fprintf (stderr, "error was: %s\n", lt_dlerror());
+    return 1;
+  }
+
+  info = lt_dlgetinfo(handle);
+  if (!info) {
+    fprintf (stderr, "can't get module info: %s\n", lt_dlerror());
+    return 1;
+  }
+  if (info->name) {
+    printf ("module name: %s\n", info->name);
+  } else {
+    printf ("module is not a libtool module\n");
+  }
+  printf ("module filename: %s\n", info->filename);
+  printf ("module reference count: %i\n", info->ref_count);
+  
+  phello = (int(*)())lt_dlsym(handle, "hello");  
+  if (phello)
+    {
+      int value = (*phello) ();
+      
+      printf ("hello returned: %i\n", value);
+      if (value == HELLO_RET)
+        printf("hello is ok!\n");
+    }
+  else
+    {
+      fprintf (stderr, "did not find the `hello' function\n");
+      fprintf (stderr, "error was: %s\n", lt_dlerror());
+      ret = 1;
+    }
+
+  pnothing = (int*)lt_dlsym(handle, "nothing");  
+  /* Try assigning to the nothing variable. */
+  if (pnothing)
+    *pnothing = 1;
+  else
+    {
+      fprintf (stderr, "did not find the `nothing' variable\n");
+      fprintf (stderr, "error was: %s\n", lt_dlerror());
+      ret = 1;
+    }
+
+  pfoo1 = (int(*)())lt_dlsym(handle, "foo1");  
+  /* Just call the functions and check return values. */
+  if (pfoo1)
+    {
+      if ((*pfoo1) () == FOO_RET)
+        printf("foo1 is ok!\n");
+      else
+	ret = 1;
+    }
+  else {
+    pfoo2 = (int(*)())lt_dlsym(handle, "foo2");  
+    if (pfoo2)
+      {
+        if ((*pfoo2) () == FOO_RET)
+          printf("foo2 is ok!\n");
+        else ret = 1;
+      }
+    else
+      {
+        fprintf (stderr, "did not find any of the `foo' functions\n");
+        fprintf (stderr, "error was: %s\n", lt_dlerror());
+        ret = 1;
+      }
+  }
+  lt_dlclose(handle);
+  return ret;
+}
+
+int
+myfunc ()
+{
+  return HELLO_RET;
+}
+
+int myvar;
+
+int
+test_dlself ()
+{
+  lt_dlhandle handle;	
+  int (*pmyfunc)() = 0;
+  int *pmyvar = 0;
+  int ret = 0;
+
+  handle = lt_dlopen(0);
+  if (!handle) {
+    fprintf (stderr, "can't dlopen the program!\n");
+    fprintf (stderr, "error was: %s\n", lt_dlerror());
+    return 1;
+  }
+
+  pmyfunc = (int(*)())lt_dlsym(handle, "myfunc");
+  if (pmyfunc)
+    {
+      int value = (*pmyfunc) ();
+      
+      printf ("myfunc returned: %i\n", value);
+      if (value == HELLO_RET)
+        printf("myfunc is ok!\n");
+    }
+  else
+    {
+      fprintf (stderr, "did not find the `myfunc' function\n");
+      fprintf (stderr, "error was: %s\n", lt_dlerror());
+      ret = 1;
+    }
+
+  pmyvar = (int*)lt_dlsym(handle, "myvar");  
+  /* Try assigning to the variable. */
+  if (pmyvar)
+    *pmyvar = 1;
+  else
+    {
+      fprintf (stderr, "did not find the `myvar' variable\n");
+      fprintf (stderr, "error was: %s\n", lt_dlerror());
+      ret = 1;
+    }
+
+  lt_dlclose(handle);
+  return ret;
+}
+
+static int
+callback (const char *filename, void *data)
+{
+  printf ("%s: %s\n", (char *)data, filename);
+  return 0;
+}
+
+static int
+try_iterate (const char *search_path)
+{
+  char *s = "try_iterate";
+  return lt_dlforeachfile (search_path, callback, s);
+}
+
+/* cheap dirname clone.  We require a '/' separator, nonempty and large
+   enough input, not ending with '/', and we will overwrite the input. */
+static char *
+my_dirname (char *path)
+{
+  char *p = strrchr (path, '/');
+  if (p)
+    *p = '\0';
+  else
+    {
+      path[0] = '.';
+      path[1] = '\0';
+    }
+  return path;
+}
+
+int
+main (int argc, char **argv)
+{
+  int i;
+  int ret = 0;
+  char *p;
+
+  printf ("Welcome to GNU libtool mdemo!\n");
+
+  if (argc < 2) {
+    fprintf (stderr, "usage: %s module [module...]\n", argv[0]);
+  }
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during initialization: %s\n", lt_dlerror());
+    return 1;
+  }
+
+  for (i = 1; i < argc; i++)
+  {
+    if (test_dl(argv[i], 0))
+       ret = 1;
+    p = strrchr(argv[i], '.');
+    if (p)
+      {
+	*p = '\0';
+	if (test_dl(argv[i], 1))
+	  ret = 1;
+	*p = '.';
+      }
+  }
+
+  if (test_dlself())
+    ret = 1;
+
+  for (i = 1; i < argc; i++)
+    if (argv[i][0] != '\0')
+      {
+	my_dirname (argv[i]);
+	if (try_iterate (argv[i]))
+	  ret = 1;
+      }
+
+  lt_dlexit();
+  return ret;
+}
diff --git a/tests/mdemo/mlib.c b/tests/mdemo/mlib.c
new file mode 100644
index 0000000..c16c35c
--- /dev/null
+++ b/tests/mdemo/mlib.c
@@ -0,0 +1,136 @@
+/* mlib.c -- mlib library
+
+   Copyright (C) 2002, 2006 Free Software Foundation, Inc.
+   Written by Greg Eisenhauer, 2002
+   Extracted from mdemo.c
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include "ltdl.h"
+#include <stdio.h>
+
+int
+test_dl (char *filename)
+{
+  lt_dlhandle handle;	
+  const lt_dlinfo *info;
+  int (*pfoo1)() = 0;
+  int (*pfoo2)() = 0;
+  int (*phello)() = 0;
+  int *pnothing = 0;
+  int ret = 0;
+
+  handle = lt_dlopen(filename);
+  if (!handle) {
+    fprintf (stderr, "can't open the module %s!\n", filename);
+    fprintf (stderr, "error was: %s\n", lt_dlerror());
+    return 1;
+  }
+
+  info = lt_dlgetinfo(handle);
+  if (!info) {
+    fprintf (stderr, "can't get module info: %s\n", lt_dlerror());
+    return 1;
+  }
+  if (info->name) {
+    printf ("module name: %s\n", info->name);
+  } else {
+    printf ("module is not a libtool module\n");
+  }
+  printf ("module filename: %s\n", info->filename);
+  printf ("module reference count: %i\n", info->ref_count);
+  
+  phello = (int(*)())lt_dlsym(handle, "hello");  
+  if (phello)
+    {
+      int value = (*phello) ();
+      
+      printf ("hello returned: %i\n", value);
+      if (value == HELLO_RET)
+        printf("hello is ok!\n");
+    }
+  else
+    {
+      fprintf (stderr, "did not find the `hello' function\n");
+      fprintf (stderr, "error was: %s\n", lt_dlerror());
+      ret = 1;
+    }
+
+  pnothing = (int*)lt_dlsym(handle, "nothing");  
+  /* Try assigning to the nothing variable. */
+  if (pnothing)
+    *pnothing = 1;
+  else
+    {
+      fprintf (stderr, "did not find the `nothing' variable\n");
+      fprintf (stderr, "error was: %s\n", lt_dlerror());
+      ret = 1;
+    }
+
+  pfoo1 = (int(*)())lt_dlsym(handle, "foo1");  
+  /* Just call the functions and check return values. */
+  if (pfoo1)
+    {
+      if ((*pfoo1) () == FOO_RET)
+        printf("foo1 is ok!\n");
+      else
+	ret = 1;
+    }
+  else {
+    pfoo2 = (int(*)())lt_dlsym(handle, "foo2");  
+    if (pfoo2)
+      {
+        if ((*pfoo2) () == FOO_RET)
+          printf("foo2 is ok!\n");
+        else ret = 1;
+      }
+    else
+      {
+        fprintf (stderr, "did not find any of the `foo' functions\n");
+        fprintf (stderr, "error was: %s\n", lt_dlerror());
+        ret = 1;
+      }
+  }
+  lt_dlclose(handle);
+  return ret;
+}
+
+int 
+mlib_func (int argc, char **argv)
+{
+  int ret = 0;
+  int i;
+  /*
+   * Would be nice if this somehow worked for libraries, not just executables.
+   * LTDL_SET_PRELOADED_SYMBOLS();
+   */
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during initialization: %s\n", lt_dlerror());
+    return 1;
+  }
+
+  for (i = 1; i < argc; i++)
+    if (test_dl(argv[i]))
+       ret = 1;
+
+  lt_dlexit();
+  return ret;
+}
diff --git a/tests/mdemo/sub.c b/tests/mdemo/sub.c
new file mode 100644
index 0000000..eed001f
--- /dev/null
+++ b/tests/mdemo/sub.c
@@ -0,0 +1,31 @@
+/* sub.c -- trivial test library
+
+   Copyright (C) 1998-1999, 2006 Free Software Foundation, Inc.
+   Written by Thomas Tanner, 1998
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include <stdio.h>
+
+void
+sub ()
+{
+  printf ("sub() called\n");
+}
diff --git a/tests/mdemo2-conf.test b/tests/mdemo2-conf.test
new file mode 100755
index 0000000..e399997
--- /dev/null
+++ b/tests/mdemo2-conf.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# mdemo2-conf.test - try configuring the mdemo2 subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/mdemo2"
+func_make_distclean
+func_configure
+func_check_static_shared "yes" "yes"
+
+exit 0
diff --git a/tests/mdemo2-exec.test b/tests/mdemo2-exec.test
new file mode 100755
index 0000000..672df93
--- /dev/null
+++ b/tests/mdemo2-exec.test
@@ -0,0 +1,35 @@
+#! /bin/sh
+# mdemo2-exec.test - check that programs in the mdemo2 subdirectory are viable
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "mdemo2-make" "tests/mdemo2/mdemo2$EXEEXT"
+
+func_rmprefixdir
+func_exec_init "uninstalled"
+func_exec "tests/mdemo2/mdemo2_static$EXEEXT tests/mdemo/foo1.la tests/mdemo/libfoo2.la"
+func_exec "tests/mdemo2/mdemo2$EXEEXT tests/mdemo/foo1.la tests/mdemo/libfoo2.la"
+
+exit $exec_status
diff --git a/tests/mdemo2-make.test b/tests/mdemo2-make.test
new file mode 100755
index 0000000..8f5e4dc
--- /dev/null
+++ b/tests/mdemo2-make.test
@@ -0,0 +1,35 @@
+#! /bin/sh
+# mdemo2-make.test - try building in the mdemo2 subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "mdemo2-conf" "tests/mdemo2/Makefile"
+func_require "mdemo-make" "tests/mdemo/libmlib.la"
+
+func_rmprefixdir
+func_cd "tests/mdemo2"
+func_make
+
+exit 0
diff --git a/tests/mdemo2/Makefile.am b/tests/mdemo2/Makefile.am
new file mode 100644
index 0000000..e215650
--- /dev/null
+++ b/tests/mdemo2/Makefile.am
@@ -0,0 +1,53 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS  = -I ../../libltdl/m4
+AM_CPPFLAGS	 = -I$(top_srcdir)/../.. -I$(top_srcdir)/../../libltdl
+
+bin_PROGRAMS = mdemo2 mdemo2_static
+
+# Create a version of mdemo2 that links a library that does dlopen.
+mdemo2_SOURCES = main.c
+mdemo2_LDFLAGS = -export-dynamic "-dlopen" force
+mdemo2_LDADD = ../mdemo/libmlib.la
+
+# Create a statically linked version of mdemo.
+mdemo2_static_SOURCES = $(mdemo2_SOURCES)
+mdemo2_static_LDFLAGS = $(STATIC) $(mdemo2_LDFLAGS)
+mdemo2_static_LDADD = $(mdemo2_LDADD)
+mdemo2_static_DEPENDENCIES = $(mdemo2_DEPENDENCIES)
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
diff --git a/tests/mdemo2/Makefile.in b/tests/mdemo2/Makefile.in
new file mode 100644
index 0000000..fdec723
--- /dev/null
+++ b/tests/mdemo2/Makefile.in
@@ -0,0 +1,686 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = mdemo2$(EXEEXT) mdemo2_static$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) \
+	$(srcdir)/../../libltdl/config/config.guess \
+	$(srcdir)/../../libltdl/config/config.sub \
+	$(srcdir)/../../libltdl/config/install-sh \
+	$(srcdir)/../../libltdl/config/ltmain.sh \
+	$(srcdir)/../../libltdl/config/missing $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	../../libltdl/config/compile ../../libltdl/config/config.guess \
+	../../libltdl/config/config.sub ../../libltdl/config/depcomp \
+	../../libltdl/config/install-sh ../../libltdl/config/ltmain.sh \
+	../../libltdl/config/mdate-sh ../../libltdl/config/missing \
+	../../libltdl/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_mdemo2_OBJECTS = main.$(OBJEXT)
+mdemo2_OBJECTS = $(am_mdemo2_OBJECTS)
+mdemo2_DEPENDENCIES = ../mdemo/libmlib.la
+mdemo2_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(mdemo2_LDFLAGS) \
+	$(LDFLAGS) -o $@
+am__objects_1 = main.$(OBJEXT)
+am_mdemo2_static_OBJECTS = $(am__objects_1)
+mdemo2_static_OBJECTS = $(am_mdemo2_static_OBJECTS)
+mdemo2_static_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(mdemo2_static_LDFLAGS) $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(mdemo2_SOURCES) $(mdemo2_static_SOURCES)
+DIST_SOURCES = $(mdemo2_SOURCES) $(mdemo2_static_SOURCES)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC = @STATIC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS = -I ../../libltdl/m4
+AM_CPPFLAGS = -I$(top_srcdir)/../.. -I$(top_srcdir)/../../libltdl
+
+# Create a version of mdemo2 that links a library that does dlopen.
+mdemo2_SOURCES = main.c
+mdemo2_LDFLAGS = -export-dynamic "-dlopen" force
+mdemo2_LDADD = ../mdemo/libmlib.la
+
+# Create a statically linked version of mdemo.
+mdemo2_static_SOURCES = $(mdemo2_SOURCES)
+mdemo2_static_LDFLAGS = $(STATIC) $(mdemo2_LDFLAGS)
+mdemo2_static_LDADD = $(mdemo2_LDADD)
+mdemo2_static_DEPENDENCIES = $(mdemo2_DEPENDENCIES)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+mdemo2$(EXEEXT): $(mdemo2_OBJECTS) $(mdemo2_DEPENDENCIES) 
+	@rm -f mdemo2$(EXEEXT)
+	$(mdemo2_LINK) $(mdemo2_OBJECTS) $(mdemo2_LDADD) $(LIBS)
+mdemo2_static$(EXEEXT): $(mdemo2_static_OBJECTS) $(mdemo2_static_DEPENDENCIES) 
+	@rm -f mdemo2_static$(EXEEXT)
+	$(mdemo2_static_LINK) $(mdemo2_static_OBJECTS) $(mdemo2_static_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libtool ctags dist \
+	dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \
+	dist-xz dist-zip distcheck distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-local \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-binPROGRAMS
+
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/mdemo2/README b/tests/mdemo2/README
new file mode 100644
index 0000000..8a1e18b
--- /dev/null
+++ b/tests/mdemo2/README
@@ -0,0 +1,5 @@
+This is mdemo2, an example package that attempts to use GNU libtool to
+link with a library that itself does dlopening of libtool modules.
+
+This demo depends upon the libraries generated in ../mdemo.
+
diff --git a/tests/mdemo2/aclocal.m4 b/tests/mdemo2/aclocal.m4
new file mode 100644
index 0000000..d479ce3
--- /dev/null
+++ b/tests/mdemo2/aclocal.m4
@@ -0,0 +1,956 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../libltdl/m4/libtool.m4])
+m4_include([../../libltdl/m4/ltoptions.m4])
+m4_include([../../libltdl/m4/ltsugar.m4])
+m4_include([../../libltdl/m4/ltversion.m4])
+m4_include([../../libltdl/m4/lt~obsolete.m4])
diff --git a/tests/mdemo2/configure b/tests/mdemo2/configure
new file mode 100755
index 0000000..49989ba
--- /dev/null
+++ b/tests/mdemo2/configure
@@ -0,0 +1,13399 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for mdemo2 1.0.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='mdemo2'
+PACKAGE_TARNAME='mdemo2'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='mdemo2 1.0'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="main.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+STATIC
+LIBTOOL_DEPS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures mdemo2 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/mdemo2]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of mdemo2 1.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+mdemo2 configure 1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by mdemo2 $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in ../../libltdl/config "$srcdir"/../../libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../libltdl/config \"$srcdir\"/../../libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='mdemo2'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+enable_dlopen=yes
+
+
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+STATIC=""
+test "X$enable_static" = Xyes && STATIC="-static"
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by mdemo2 $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+mdemo2 config.status 1.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/tests/mdemo2/configure.ac b/tests/mdemo2/configure.ac
new file mode 100644
index 0000000..c73ae5f
--- /dev/null
+++ b/tests/mdemo2/configure.ac
@@ -0,0 +1,62 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#   Copyright (C) 2001, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AC_PREREQ(2.54)
+
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([mdemo2], [1.0], [bug-libtool@gnu.org])
+AC_CONFIG_SRCDIR([main.c])
+AC_CONFIG_AUX_DIR([../../libltdl/config])
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+AC_PROG_CC
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LT_INIT([dlopen])
+AC_SUBST(LIBTOOL_DEPS)
+
+STATIC=""
+test "X$enable_static" = Xyes && STATIC="-static"
+AC_SUBST([STATIC])
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/tests/mdemo2/main.c b/tests/mdemo2/main.c
new file mode 100644
index 0000000..a08d968
--- /dev/null
+++ b/tests/mdemo2/main.c
@@ -0,0 +1,46 @@
+/* main.c -- mdemo2 test program
+
+   Copyright (C) 2003, 2006 Free Software Foundation, Inc.
+   Written by Greg Eisenhauer, 2003
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include <stdio.h>
+#include "ltdl.h"
+
+extern int mlib_func (int, char **);
+
+int
+main (int argc, char **argv)
+{
+  int ret = 0;
+
+  printf ("Welcome to GNU libtool mdemo2!\n");
+  if (argc < 2) {
+    fprintf (stderr, "usage: %s module [module...]\n", argv[0]);
+  }
+
+/* This must be called in the program to get the preloaded symbols */
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  ret = mlib_func(argc, argv);
+
+  return ret;
+}
diff --git a/tests/need_lib_prefix.at b/tests/need_lib_prefix.at
new file mode 100644
index 0000000..ea36da3
--- /dev/null
+++ b/tests/need_lib_prefix.at
@@ -0,0 +1,197 @@
+# need-lib-prefix.at -- test libltdl functionality            -*- Autotest -*-
+#
+#   Copyright (C) 2007, 2008, 2010 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([enforced lib prefix])
+AT_KEYWORDS([libltdl libtool])
+
+# Originally written to simulate a failure visible on systems
+# which need a library prefix like 'lib', such as BeOS.  Currently
+# the prefix is hardcoded as 'lib', so systems that require a
+# different prefix skips the test.
+
+AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+
+typedef int fun (int);
+
+static int errors = 0;
+
+static void
+complain (const char *msg)
+{
+  const char *errmsg = lt_dlerror ();
+  fprintf (stderr, "%s", msg);
+  if (errmsg)
+    fprintf (stderr, ": %s\n", errmsg);
+  else
+    fprintf (stderr, ".\n");
+  ++errors;
+}
+
+static lt_dlhandle
+moduleopen (const char *filename)
+{
+  lt_dlhandle handle;
+
+  handle = lt_dlopen (filename);
+  if (!handle)
+    {
+      fprintf (stderr, "can't open the module %s!\n", filename);
+      complain ("error was");
+    }
+
+  return handle;
+}
+
+static int
+moduletest (lt_dlhandle handle)
+{
+  const lt_dlinfo *info = lt_dlgetinfo (handle);
+  fun *f = (fun *) lt_dlsym (handle, "f");
+  int *v = (int *) lt_dlsym (handle, "i");
+
+  if (!f)
+    {
+      complain ("function `f' not found");
+      return 1;
+    }
+  if (!v)
+    {
+      complain ("variable `i' not found");
+      return 1;
+    }
+  printf ("%s: %d\n", info->name, f (*v));
+
+  return 0;
+}
+
+int
+main (int argc, char **argv)
+{
+  lt_dlhandle handle;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (lt_dlinit() != 0)
+    {
+      fprintf (stderr, "error during initialization: %s\n", lt_dlerror());
+      return 1;
+    }
+
+  if (lt_dlpreload_open (0, moduletest) != 0)
+    complain ("error during preloading");
+
+  if (lt_dlexit () != 0)
+    complain ("error during exit");
+
+  return (errors != 0);
+}
+]])
+
+AT_DATA([foo1.c],
+[[#define f foo1_LTX_f
+#define i foo1_LTX_i
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f (int x) { return x / 3; }
+int i = 7;
+#ifdef __cplusplus
+}
+#endif
+]])
+
+AT_DATA([foo2.c],
+[[#define f libfoo2_LTX_f
+#define i libfoo2_LTX_i
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f (int x) { return (x * x) / 10; }
+int i = 6;
+#ifdef __cplusplus
+}
+#endif
+]])
+
+LT_AT_HOST_DATA([expout],
+[[libfoo1: 2
+libfoo2: 3
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS"
+
+# Skip this test when libraries are not normally prefixed with lib.
+# E.g., for MSVC and OS/2.
+eval "`$LIBTOOL --config | $EGREP '^(libname_spec)='`"
+name=
+eval libname=\"$libname_spec\"
+AT_CHECK([test "$libname" = lib || exit 77])
+
+# Create our own libtool, forcing need_lib_prefix setting
+sed 's,^\(need_lib_prefix\)=.*$,\1=unknown,' $LIBTOOL > ./libtool
+LIBTOOL="$SHELL ./libtool"
+
+# Installation directory:
+instdir=`pwd`/_inst
+
+$CC $CPPFLAGS $CFLAGS -c main.c
+for file in foo1 foo2; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file.c
+done
+
+AT_CHECK([$LIBTOOL --mode=link $CC -module -avoid-version $CFLAGS $LDFLAGS -o foo1.la foo1.lo -rpath $instdir/lib],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC -module -avoid-version $CFLAGS $LDFLAGS -o libfoo2.la foo2.lo -rpath $instdir/lib],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -dlpreopen foo1.la -dlpreopen libfoo2.la $LIBLTDL],
+          [], [ignore], [ignore])
+
+LT_AT_NOINST_EXEC_CHECK([./main], [-dlopen foo1.la -dlopen libfoo2.la],
+	      [], [expout], [])
+
+# Install the libraries.
+mkdir $instdir
+mkdir $instdir/lib
+$LIBTOOL --mode=install cp foo1.la $instdir/lib/foo1.la
+$LIBTOOL --mode=install cp libfoo2.la $instdir/lib/libfoo2.la
+
+# Install the binary
+mkdir $instdir/bin
+$LIBTOOL --mode=install cp main$EXEEXT $instdir/bin/main$EXEEXT
+
+LT_AT_EXEC_CHECK([$instdir/bin/main], [], [expout], [])
+
+AT_CLEANUP
diff --git a/tests/no-executables.at b/tests/no-executables.at
new file mode 100644
index 0000000..bcc9cf2
--- /dev/null
+++ b/tests/no-executables.at
@@ -0,0 +1,79 @@
+# no-executables.at -- Libtool usage in GCC        -*- Autotest -*-
+
+#   Copyright (C) 2008, 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Libtool usage in GCC])
+AT_SETUP([AC_NO_EXECUTABLES])
+
+mkdir m4
+
+AT_DATA([configure.ac],
+[[AC_INIT([no-exec], [1])
+AC_CONFIG_MACRO_DIR([m4])
+
+# We punt a bit here, to get the results of AC_PROG_CC
+# (and allow it to do link tests) but still error out on
+# link tests within Libtool macros.
+LDFLAGS=-lnosuchlibrary
+AC_NO_EXECUTABLES
+AC_PROG_CC
+AC_PROG_CXX
+AC_PROG_F77
+AC_PROG_FC
+AM_PROG_GCJ
+
+# Consequently, we have to set cache variables for each link
+# test we may need.  For the purposes of this test, it shouldn't
+# matter much whether these values are actually wrong, the point
+# is that the linker should never be invoked.
+
+lt_cv_shlibpath_overrides_runpath=no
+lt_cv_archive_cmds_need_lc=no
+lt_cv_cc_needs_belf=no
+lt_cv_ld_exported_symbols_list=no
+lt_cv_prog_compiler_static_works=no
+lt_cv_aix_libpath="/usr/lib:/lib"
+lt_cv_irix_exported_symbol=yes
+
+# Deal with AC_LIBTOOL_DLOPEN in one of two possible ways:
+# - do not execute it at all in the ac_no_link case
+# - preset the individual Autoconf test variables
+
+if ${test_ac_libtool_dlopen-false}; then
+    ac_cv_func_shl_load=no
+    ac_cv_lib_dld_shl_load=no
+    ac_cv_func_dlopen=no
+    ac_cv_lib_dl_dlopen=no
+    ac_cv_lib_svld_dlopen=no
+    ac_cv_lib_dld_dld_link=no
+  AC_LIBTOOL_DLOPEN
+fi
+AC_PROG_LIBTOOL
+
+AC_OUTPUT
+]])
+
+LT_AT_BOOTSTRAP([--install], [-I m4], [ignore], [ignore], [], [ignore], [ignore])
+LT_AT_CONFIGURE([])
+LT_AT_CONFIGURE([test_ac_libtool_dlopen=:])
+
+AT_CLEANUP
diff --git a/tests/nocase.at b/tests/nocase.at
new file mode 100644
index 0000000..faacc0d
--- /dev/null
+++ b/tests/nocase.at
@@ -0,0 +1,85 @@
+# nocase.at --  test for nocase lib search  -*- Autotest -*-
+#
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#   Written by Peter Rosin, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AT_SETUP([nocase library search])
+AT_KEYWORDS([libtool])
+
+eval `$LIBTOOL --config | $EGREP '^(want_nocaseglob|file_magic_glob)='`
+
+AT_CHECK([test "$want_nocaseglob" != yes && ]dnl
+         [test -z "$file_magic_glob" && exit 77],
+	  [1], [ignore], [ignore])
+
+mkdir foo
+AT_DATA([foo/Foo.c],
+[
+int Foo (void) { return 1; }
+])
+
+mkdir bar
+AT_DATA([bar/bar.c],
+[
+extern int Foo (void);
+int bar (void) { return Foo (); }
+])
+
+AT_DATA([main.c],
+[
+extern int bar (void);
+int main (void) { return bar (); }
+])
+
+libdir=`pwd`/inst/lib
+mkdir inst inst/bin inst/lib
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o foo/Foo.lo foo/Foo.c
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o foo/libFoo.la foo/Foo.lo ]dnl
+	 [-no-undefined -version-info 1:0:0 -rpath $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp foo/libFoo.la $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=clean rm -f foo/libFoo.la],
+	 [], [ignore], [ignore])
+
+rm -f $libdir/libFoo.la
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o bar/bar.lo bar/bar.c
+AT_CHECK([$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o bar/libbar.la bar/bar.lo ]dnl
+	 [-L$libdir -lfoo -no-undefined -version-info 1:0:0 -rpath $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp bar/libbar.la $libdir],
+	 [], [ignore], [ignore])
+
+str=`$EGREP '^(old_library)=' < $libdir/libbar.la`
+eval "$str"
+libbar=$old_library
+rm -f $libdir/$libbar
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o main.$OBJEXT main.c
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -L$libdir -lbar],
+	 [], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/nomode.test b/tests/nomode.test
new file mode 100755
index 0000000..779b03d
--- /dev/null
+++ b/tests/nomode.test
@@ -0,0 +1,48 @@
+#! /bin/sh
+# nomode.test - check that we can actually get help
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+status=$EXIT_SUCCESS
+if $LIBTOOL --help 2>&1 | grep '^Usage:' >/dev/null; then :
+else
+  echo "cannot get top-level help"
+  status=$EXIT_FAILURE
+fi
+
+if $LIBTOOL --mode=link --help 2>&1 | grep '^Usage:' >/dev/null; then :
+else
+  echo "cannot get --mode=link help"
+  status=$EXIT_FAILURE
+fi
+
+# The emoticon below works around a nasty bug in Ultrix /bin/sh
+if ($LIBTOOL 2>&1; :) | grep 'you must specify a MODE' >/dev/null; then :
+else
+  echo "invalid error when no mode is specified"
+  status=$EXIT_FAILURE
+fi
+
+exit $status
diff --git a/tests/nonrecursive.at b/tests/nonrecursive.at
new file mode 100644
index 0000000..d37ec05
--- /dev/null
+++ b/tests/nonrecursive.at
@@ -0,0 +1,149 @@
+# nonrecursive.at -- test nonrecursive Automake Libltdl       -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2008, 2009 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AT_BANNER([Nonrecursive Automake Libltdl.])
+
+# _LT_AT_LTDL_SETUP
+# -----------------
+m4_pushdef([_LT_AT_LTDL_SETUP],
+[AT_DATA([configure.ac],
+[[AC_INIT([subdirectory-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+AC_CONFIG_LIBOBJ_DIR([ltdl])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign subdir-objects])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT
+LTDL_INIT([nonrecursive])
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],
+[[ACLOCAL_AMFLAGS = -I ltdl/m4
+AUTOMAKE_OPTIONS	= 1.9.6
+BUILT_SOURCES		=
+
+AM_CPPFLAGS		=
+AM_LDFLAGS		=
+
+include_HEADERS		=
+noinst_LTLIBRARIES	=
+lib_LTLIBRARIES		= foo.la
+EXTRA_LTLIBRARIES	=
+
+EXTRA_DIST		=
+
+CLEANFILES		=
+MOSTLYCLEANFILES	=
+
+include ltdl/Makefile.inc
+
+foo_la_LDFLAGS		= -module -avoid-version -no-undefined
+foo_la_SOURCES		= foo.c
+]])
+
+echo 'int dummy = 0;' > foo.c
+])# _LT_AT_LTDL_SETUP
+
+## ------------------------ ##
+## Softlinked libltdl tree. ##
+## ------------------------ ##
+
+AT_SETUP([compiling softlinked libltdl])
+
+_LT_AT_LTDL_SETUP
+
+LT_AT_LIBTOOLIZE([--ltdl])
+AT_CHECK([if test -f ltdl/configure.ac; then false; fi])
+
+# Support vanilla autoconf-2.59 & automake-1.9.6
+for file in argz.c lt__dirent.c lt__strl.c; do
+  cp ltdl/$file $file
+done
+
+LT_AT_BOOTSTRAP([ignore], [-I ltdl/m4], [], [--add-missing --copy],
+	[], [], [all $tst_dist])
+
+AT_CHECK([test -f ltdl/libltdlc.la])
+
+AT_CLEANUP
+
+
+## -------------------- ##
+## Copied libltdl tree. ##
+## -------------------- ##
+
+AT_SETUP([compiling copied libltdl])
+
+_LT_AT_LTDL_SETUP
+
+LT_AT_LIBTOOLIZE([--copy --ltdl])
+AT_CHECK([if test -f ltdl/configure.ac; then false; fi])
+
+# Support vanilla autoconf-2.59 & automake-1.9.6
+for file in argz.c lt__dirent.c lt__strl.c; do
+  cp ltdl/$file $file
+done
+
+LT_AT_BOOTSTRAP([ignore], [-I ltdl/m4], [], [--add-missing --copy],
+	[], [], [all $tst_dist])
+
+AT_CHECK([test -f ltdl/libltdlc.la])
+
+AT_CLEANUP
+
+
+## ------------------------- ##
+## Installable libltdl tree. ##
+## ------------------------- ##
+
+AT_SETUP([installable libltdl])
+
+_LT_AT_LTDL_SETUP
+
+prefix=`pwd`/_inst
+
+LT_AT_LIBTOOLIZE([--copy --ltdl])
+AT_CHECK([if test -f ltdl/configure.ac; then false; fi])
+
+# Support vanilla autoconf-2.59 & automake-1.9.6
+for file in argz.c lt__dirent.c lt__strl.c; do
+  cp ltdl/$file $file
+done
+
+LT_AT_BOOTSTRAP([ignore], [-I ltdl/m4], [], [--add-missing --copy],
+	[], [--enable-ltdl-install --prefix=$prefix], [all install $tst_dist])
+
+AT_CHECK([test -f $prefix/lib/libltdl.la])
+AT_CHECK([test -f $prefix/include/ltdl.h])
+
+AT_CLEANUP
+
+dnl Be careful not to let the definition leak into other tests
+m4_popdef([_LT_AT_LTDL_SETUP])
diff --git a/tests/objectlist.test b/tests/objectlist.test
new file mode 100755
index 0000000..0506340
--- /dev/null
+++ b/tests/objectlist.test
@@ -0,0 +1,48 @@
+#! /bin/sh
+# objectlist.test - make sure that a nonexisting objectlist file is properly
+#                   mentioned and that the argument may contain spaces.
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+# Try a sample link command.
+linkresult=`$LIBTOOL -n --mode=link $CC -objectlist nonexistant 2>&1`
+test $? -eq 0 && exit $EXIT_FAILURE
+
+echo "$linkresult" | ${EGREP} "nonexistant" >/dev/null 2>&1 && {
+  func_msg "$progname: error message contains -objectlist argument as expected"
+}  || exit $EXIT_FAILURE
+
+
+objlist="object list with spaces"
+: > "$objlist"
+linkresult=`$LIBTOOL -n --mode=link $CC -o a.out -objectlist "$objlist" 2>&1`
+rm -f "$objlist"
+
+echo "$linkresult" | ${EGREP} "spaces" >/dev/null 2>&1 && {
+  func_msg "$progname: -objectlist with spaces in filename not recognized."
+  exit $EXIT_FAILURE
+} 
+
+exit $EXIT_SUCCESS
diff --git a/tests/old-m4-iface.at b/tests/old-m4-iface.at
new file mode 100644
index 0000000..cb823a2
--- /dev/null
+++ b/tests/old-m4-iface.at
@@ -0,0 +1,165 @@
+# old-m4-iface.at -- exercise old m4 interface to libtool     -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2008, 2009 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+
+AT_BANNER([Support for older m4 interface.])
+
+########################################################################
+##
+## TODO:
+##   test all the interfaces currently supported by AU_DEFUN/AU_ALIAS
+##   test autoupdate on all of those tests' configure.in
+##
+########################################################################
+
+## -------------------------------------------------------- ##
+## An overtly simple old-school AM_PROG_LIBTOOL invocation. ##
+## -------------------------------------------------------- ##
+
+AT_SETUP([AM_PROG_LIBTOOL])
+
+AT_DATA([configure.in],
+[[AC_INIT(old.c)
+AM_PROG_LIBTOOL
+AC_SUBST([LIBTOOL_DEPS])
+AC_OUTPUT(Makefile)
+]])
+
+AT_DATA([Makefile.in],
+[[COMPILE = @CC@ @CPPFLAGS@ @CFLAGS@
+LINK      = @CC@ @CFLAGS@ @LDFLAGS@ -o $@
+SHELL     = @SHELL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+
+all: libtool old@EXEEXT@
+
+old@EXEEXT@: old.@OBJEXT@
+	$(LINK) old.@OBJEXT@
+
+.SUFFIXES:
+.SUFFIXES: .c .@OBJEXT@
+
+.c.@OBJEXT@:
+	$(COMPILE) -c $<
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+]])
+
+
+AT_DATA([old.c],
+[[#include <stdio.h>
+
+int main (void)
+{
+  printf ("Hello, World!");
+  return 0;
+}
+]])
+
+LT_AT_LIBTOOLIZE([--install])
+
+# This is slightly bogus, since only libtool.m4 was required in aclocal.m4
+# with libtool-1.5x...
+AT_CHECK([test -f aclocal.m4 ||
+  cat "$tst_aclocaldir/libtool.m4" "$tst_aclocaldir/ltoptions.m4" \
+    "$tst_aclocaldir/ltsugar.m4" "$tst_aclocaldir/ltversion.m4" \
+    "$tst_aclocaldir/lt~obsolete.m4" > aclocal.m4])
+
+LT_AT_BOOTSTRAP([ignore], [ignore], [ignore], [ignore], [--force])
+
+LT_AT_EXEC_CHECK([./old], 0, [Hello, World!])
+
+# Now, test that libtoolize doesn't mistakenly think the user called
+# any libtool macros if in fact she didn't.
+sed '/AM_PROG_LIBTOOL/d' configure.in >configure.int
+mv -f configure.int configure.in
+AT_CHECK([$LIBTOOLIZE -n], [0], [stdout], [stderr])
+# ensure no shell errors:
+AT_CHECK([grep -v "^libtoolize: " stderr], [1])
+AT_CHECK([grep "Remember to add.*LT_INIT.*to configure.in" stdout], [0], [ignore])
+AT_CHECK([grep "Consider adding.*LT_WITH_LTDL" stdout], [1])
+AT_CHECK([grep "Remember to add.*LT_CONFIG_LTDL_DIR" stdout], [1])
+
+AT_CLEANUP
+
+
+## --------------------------- ##
+## An old style libltdl build. ##
+## --------------------------- ##
+
+AT_SETUP([AC_WITH_LTDL])
+
+_LTDL_PROJECT_FILES
+
+AT_DATA([configure.in],
+[[AC_PREREQ(2.50)
+AC_INIT([main.c])
+AC_PROG_MAKE_SET
+AC_LIBTOOL_DLOPEN
+AM_PROG_LIBTOOL
+AC_WITH_LTDL
+AC_OUTPUT(Makefile)
+]])
+
+AT_DATA([Makefile.in],
+[[top_srcdir	= .
+top_builddir	= .
+COMPILE		= @CC@ @INCLTDL@  @CPPFLAGS@ @CFLAGS@
+LTCOMPILE	= @LIBTOOL@ --mode=compile $(COMPILE)
+LTLINK		= @LIBTOOL@ --mode=link @CC@ -no-undefined @CFLAGS@ @LDFLAGS@ -o $@
+SHELL		= @SHELL@
+@SET_MAKE@
+
+TARGETS    = libltdl/libltdlc.la module.la ltdldemo@EXEEXT@
+
+all: $(TARGETS)
+
+libltdl/libltdlc.la:
+	cd libltdl && $(MAKE)
+
+module.la: module.lo
+	$(LTLINK) module.lo -module -avoid-version -rpath /dev/null
+
+ltdldemo@EXEEXT@: main.@OBJEXT@ module.la libltdl/libltdlc.la
+	$(LTLINK) main.@OBJEXT@ -dlopen module.la @LIBLTDL@ @LIBS@
+
+.SUFFIXES:
+.SUFFIXES: .c .@OBJEXT@ .lo
+
+.c.@OBJEXT@:
+	$(COMPILE) -c $<
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+]])
+
+# Be sure to use the in-tree libltdl, somebody might have removed
+# an installed libltdl.la file.
+LT_AT_BOOTSTRAP([--ltdl --install], [-I libltdl/m4], [ignore], [ignore],
+	[--force], [--with-included-ltdl])
+
+LT_AT_EXEC_CHECK([./ltdldemo], 0, [ignore])
+
+AT_CLEANUP
diff --git a/tests/package.m4 b/tests/package.m4
new file mode 100644
index 0000000..63fa0ab
--- /dev/null
+++ b/tests/package.m4
@@ -0,0 +1,7 @@
+# Signature of the current package.
+m4_define([AT_PACKAGE_NAME],      [GNU Libtool])
+m4_define([AT_PACKAGE_TARNAME],   [libtool])
+m4_define([AT_PACKAGE_VERSION],   [2.4.2])
+m4_define([AT_PACKAGE_STRING],    [GNU Libtool 2.4.2])
+m4_define([AT_PACKAGE_BUGREPORT], [bug-libtool@gnu.org])
+m4_define([AT_PACKAGE_URL],       [http://www.gnu.org/software/libtool/])
diff --git a/tests/pdemo-conf.test b/tests/pdemo-conf.test
new file mode 100755
index 0000000..9298ccd
--- /dev/null
+++ b/tests/pdemo-conf.test
@@ -0,0 +1,47 @@
+#! /bin/sh
+# pdemo-conf.test - try configuring the pdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/pdemo"
+func_make_distclean
+func_configure
+func_check_static_shared "yes" "yes"
+
+if test -f ./libtool ; then
+  sed 's/^max_cmd_len=*/max_cmd_len=24 # /g' ./libtool > ltnew
+else
+  exit 1
+fi
+
+if test -f ./ltnew ; then
+  rm -f libtool
+  mv ltnew libtool
+else
+  exit 1
+fi
+
+exit 0
diff --git a/tests/pdemo-exec.test b/tests/pdemo-exec.test
new file mode 100755
index 0000000..d051ff9
--- /dev/null
+++ b/tests/pdemo-exec.test
@@ -0,0 +1,36 @@
+#! /bin/sh
+# pdemo-exec.test - check that programs in the pdemo subdirectory are viable
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "pdemo-make" "tests/pdemo/hell$EXEEXT"
+
+func_rmprefixdir
+func_exec_init "uninstalled"
+func_exec "tests/pdemo/hell_static$EXEEXT" 'Welcome to GNU Hell'
+func_exec "tests/pdemo/hell$EXEEXT" 'Welcome to GNU Hell'
+func_exec "tests/pdemo/helldl$EXEEXT" '(Welcome to .*GNU Hell|unsupported)'
+
+exit $exec_status
diff --git a/tests/pdemo-inst.test b/tests/pdemo-inst.test
new file mode 100755
index 0000000..8188b00
--- /dev/null
+++ b/tests/pdemo-inst.test
@@ -0,0 +1,39 @@
+#! /bin/sh
+# demo-inst.test - try installing from the demo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "pdemo-make" "tests/pdemo/hell$EXEEXT"
+
+func_mkprefixdir
+func_cd "tests/pdemo"
+func_make "install"
+func_exec_init "installed"
+func_exec "$prefix/bin/hell_static$EXEEXT" 'Welcome to GNU Hell'
+func_exec "$prefix/bin/hell$EXEEXT" 'Welcome to GNU Hell'
+func_exec "$prefix/bin/helldl$EXEEXT" '(Welcome to .*GNU Hell|unsupported)'
+
+exit $status
+
diff --git a/tests/pdemo-make.test b/tests/pdemo-make.test
new file mode 100755
index 0000000..867f6aa
--- /dev/null
+++ b/tests/pdemo-make.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# pdemo-make.test - try building in the pdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "pdemo-conf" "tests/pdemo/Makefile"
+
+func_rmprefixdir
+func_cd "tests/pdemo"
+func_make
+
+exit 0
diff --git a/tests/pdemo/Makefile.am b/tests/pdemo/Makefile.am
new file mode 100644
index 0000000..91fe1e2
--- /dev/null
+++ b/tests/pdemo/Makefile.am
@@ -0,0 +1,171 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005, 2010 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS  = -I ../../libltdl/m4
+AM_CPPFLAGS	 = -I$(top_srcdir)/../..
+
+# Build a libtool library, libhello.la for installation in libdir.
+lib_LTLIBRARIES = libhello.la
+libhello_la_SOURCES = longer_file_name_hello.c longer_file_name_foo.c longer_file_name_foo2.c
+libhello_la_LIBADD = $(LIBM)
+libhello_la_LDFLAGS = -no-undefined -version-info 3:12:1
+libhello_la_AM_CPPFLAGS = $(AM_CPPFLAGS) -DBUILDING_LIBHELLO
+
+include_HEADERS = foo.h
+
+if BINARY_HELLDL
+BUILD_helldl = helldl
+else
+BUILD_helldl =
+endif
+
+bin_PROGRAMS = hell hell_static $(BUILD_helldl)
+
+# Build hell from longer_file_name_main.c and libhello.la
+hell_SOURCES = longer_file_name_main.c
+hell_LDADD = libhello.la
+
+# Create a statically linked version of hell.
+hell_static_SOURCES = longer_file_name_main.c
+hell_static_LDADD = libhello.la
+hell_static_LDFLAGS = $(STATIC)
+
+if BINARY_HELLDL
+
+# Create a version of hell that does a preloaded dlopen.
+helldl_SOURCES = longer_file_name_dlmain.c
+helldl_LDFLAGS = -export-dynamic -dlpreopen libhello.la
+helldl_DEPENDENCIES = libhello.la
+
+else
+
+bin_SCRIPTS = helldl
+# create a script that says that -dlopen is not supported
+helldl helldl$(EXEEXT):
+	rm -f $@
+	echo '#! /bin/sh' > $@
+	echo '-dlopen is unsupported' >> $@
+	chmod +x $@
+endif
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+#----------------------------------------------------------------------
+# The following declarations are only used in the testsuite:
+#----------------------------------------------------------------------
+
+hardcode_tests = hc-direct hc-libflag hc-libpath hc-minusL
+CLEANFILES = $(hardcode_tests)
+
+# Unfortunately, in order to test libtool thoroughly, we need access
+# to its private directory.
+objdir = `$(LIBTOOL) --config | sed -n -e 's/^objdir=\(.*\)$$/\1/p'`
+
+# Test programs to see what gets hardcoded.
+.PHONY: hardcode
+hardcode: $(hardcode_tests)
+SET_HARDCODE_FLAGS = \
+  eval `$(LIBTOOL) --config | sed -n -e '/^hardcode_.*=/p; /^wl=/p'`
+hc-direct: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@rm -f hc-direct
+	@echo "You may ignore any linking errors from the following command:"
+	@shlib=./$(objdir)/libhello.a; \
+	  eval "`grep '^library_names' libhello.la`"; \
+	  for lib in $$library_names; do \
+	    shlib="./$(objdir)/$$lib"; \
+	  done; \
+	  $(SET_HARDCODE_FLAGS); \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$shlib $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$shlib $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+hc-libflag: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@$(SET_HARDCODE_FLAGS); \
+	  libdir=`pwd`/$(objdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  if test -z "$$flag"; then \
+	    echo "echo unsupported > $@"; \
+	    echo unsupported > $@ || status="$$?"; \
+	  else \
+	    echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$flag -L$(libdir) -lhello $(LIBS) $(LIBM)"; \
+	    $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$flag -L$(libdir) -lhello $(LIBS) $(LIBM) || status="$$?"; \
+	  fi; \
+	  exit $$status
+
+hc-libpath: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@rm -f hc-libpath
+	@echo "You may ignore any linking errors from the following command:"
+	@$(SET_HARDCODE_FLAGS); \
+	  eval `$(LIBTOOL) --config | grep '^shlibpath_var='`; \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$$shlibpath_var=./$(objdir) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$$shlibpath_var=./$(objdir) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+hc-minusL: $(hell_OBJECTS) $(hell_DEPENDENCIES)
+	@rm -f hc-minusL
+	@$(SET_HARDCODE_FLAGS); \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -L./$(objdir) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -L./$(objdir) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+# This is one of the essential tests for deplibs_check_method=pass_all.
+# If this one passes with pass_all, it is likely that pass_all works
+EXTRA_LIBRARIES = libhell0.a
+libhell0_a_SOURCES =
+libhell0_a_LIBADD = longer_file_name_hello.$(OBJEXT) longer_file_name_foo.$(OBJEXT)
+EXTRA_LTLIBRARIES = libhell1.la libhell2.la
+libhell1_la_SOURCES = longer_file_name_hell1.c
+libhell1_la_LIBADD = -L. -lhell0
+libhell1_la_LDFLAGS = -no-undefined -rpath $(libdir)
+libhell1_la_DEPENDENCIES = libhell0.a
+libhell2_la_SOURCES = longer_file_name_hell2.c
+libhell2_la_LIBADD = -L. -lhell0
+libhell2_la_LDFLAGS = -no-undefined -rpath $(libdir)
+libhell2_la_DEPENDENCIES = libhell0.a
+EXTRA_PROGRAMS = hell0
+hell0_SOURCES = longer_file_name_main.c
+hell0_LDADD = libhell1.la libhell2.la $(LIBM)
+
+# 'hell0' in EXTRA_PROGRAMS gets translated to 'hell0.exe'; but we
+# must explicitly list the wrapper script 'hell0'.  (bin_PROGRAMS
+# are handled seamlessly by automake rules; the extra step is only
+# necessary for EXTRA_PROGRAMS)
+CLEANFILES += $(EXTRA_LIBRARIES) $(EXTRA_LTLIBRARIES) $(EXTRA_PROGRAMS) hell0
+
+deplibs-check: hell0
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
diff --git a/tests/pdemo/Makefile.in b/tests/pdemo/Makefile.in
new file mode 100644
index 0000000..83c382e
--- /dev/null
+++ b/tests/pdemo/Makefile.in
@@ -0,0 +1,970 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = hell$(EXEEXT) hell_static$(EXEEXT) $(am__EXEEXT_1)
+EXTRA_PROGRAMS = hell0$(EXEEXT)
+subdir = .
+DIST_COMMON = $(am__configure_deps) $(include_HEADERS) \
+	$(srcdir)/../../libltdl/config/config.guess \
+	$(srcdir)/../../libltdl/config/config.sub \
+	$(srcdir)/../../libltdl/config/install-sh \
+	$(srcdir)/../../libltdl/config/ltmain.sh \
+	$(srcdir)/../../libltdl/config/missing $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	../../libltdl/config/compile ../../libltdl/config/config.guess \
+	../../libltdl/config/config.sub ../../libltdl/config/depcomp \
+	../../libltdl/config/install-sh ../../libltdl/config/ltmain.sh \
+	../../libltdl/config/mdate-sh ../../libltdl/config/missing \
+	../../libltdl/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+ARFLAGS = cru
+libhell0_a_AR = $(AR) $(ARFLAGS)
+libhell0_a_DEPENDENCIES = longer_file_name_hello.$(OBJEXT) \
+	longer_file_name_foo.$(OBJEXT)
+am_libhell0_a_OBJECTS =
+libhell0_a_OBJECTS = $(am_libhell0_a_OBJECTS)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+	"$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+am_libhell1_la_OBJECTS = longer_file_name_hell1.lo
+libhell1_la_OBJECTS = $(am_libhell1_la_OBJECTS)
+libhell1_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libhell1_la_LDFLAGS) $(LDFLAGS) -o $@
+am_libhell2_la_OBJECTS = longer_file_name_hell2.lo
+libhell2_la_OBJECTS = $(am_libhell2_la_OBJECTS)
+libhell2_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libhell2_la_LDFLAGS) $(LDFLAGS) -o $@
+am__DEPENDENCIES_1 =
+libhello_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am_libhello_la_OBJECTS = longer_file_name_hello.lo \
+	longer_file_name_foo.lo longer_file_name_foo2.lo
+libhello_la_OBJECTS = $(am_libhello_la_OBJECTS)
+libhello_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libhello_la_LDFLAGS) $(LDFLAGS) -o $@
+@BINARY_HELLDL_TRUE@am__EXEEXT_1 = helldl$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+am_hell_OBJECTS = longer_file_name_main.$(OBJEXT)
+hell_OBJECTS = $(am_hell_OBJECTS)
+hell_DEPENDENCIES = libhello.la
+am_hell0_OBJECTS = longer_file_name_main.$(OBJEXT)
+hell0_OBJECTS = $(am_hell0_OBJECTS)
+hell0_DEPENDENCIES = libhell1.la libhell2.la $(am__DEPENDENCIES_1)
+am_hell_static_OBJECTS = longer_file_name_main.$(OBJEXT)
+hell_static_OBJECTS = $(am_hell_static_OBJECTS)
+hell_static_DEPENDENCIES = libhello.la
+hell_static_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(hell_static_LDFLAGS) $(LDFLAGS) -o $@
+am__helldl_SOURCES_DIST = longer_file_name_dlmain.c
+@BINARY_HELLDL_TRUE@am_helldl_OBJECTS =  \
+@BINARY_HELLDL_TRUE@	longer_file_name_dlmain.$(OBJEXT)
+helldl_OBJECTS = $(am_helldl_OBJECTS)
+helldl_LDADD = $(LDADD)
+helldl_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(helldl_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SCRIPTS = $(bin_SCRIPTS)
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libhell0_a_SOURCES) $(libhell1_la_SOURCES) \
+	$(libhell2_la_SOURCES) $(libhello_la_SOURCES) $(hell_SOURCES) \
+	$(hell0_SOURCES) $(hell_static_SOURCES) $(helldl_SOURCES)
+DIST_SOURCES = $(libhell0_a_SOURCES) $(libhell1_la_SOURCES) \
+	$(libhell2_la_SOURCES) $(libhello_la_SOURCES) $(hell_SOURCES) \
+	$(hell0_SOURCES) $(hell_static_SOURCES) \
+	$(am__helldl_SOURCES_DIST)
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STATIC = @STATIC@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS = -I ../../libltdl/m4
+AM_CPPFLAGS = -I$(top_srcdir)/../..
+
+# Build a libtool library, libhello.la for installation in libdir.
+lib_LTLIBRARIES = libhello.la
+libhello_la_SOURCES = longer_file_name_hello.c longer_file_name_foo.c longer_file_name_foo2.c
+libhello_la_LIBADD = $(LIBM)
+libhello_la_LDFLAGS = -no-undefined -version-info 3:12:1
+libhello_la_AM_CPPFLAGS = $(AM_CPPFLAGS) -DBUILDING_LIBHELLO
+include_HEADERS = foo.h
+@BINARY_HELLDL_FALSE@BUILD_helldl = 
+@BINARY_HELLDL_TRUE@BUILD_helldl = helldl
+
+# Build hell from longer_file_name_main.c and libhello.la
+hell_SOURCES = longer_file_name_main.c
+hell_LDADD = libhello.la
+
+# Create a statically linked version of hell.
+hell_static_SOURCES = longer_file_name_main.c
+hell_static_LDADD = libhello.la
+hell_static_LDFLAGS = $(STATIC)
+
+# Create a version of hell that does a preloaded dlopen.
+@BINARY_HELLDL_TRUE@helldl_SOURCES = longer_file_name_dlmain.c
+@BINARY_HELLDL_TRUE@helldl_LDFLAGS = -export-dynamic -dlpreopen libhello.la
+@BINARY_HELLDL_TRUE@helldl_DEPENDENCIES = libhello.la
+@BINARY_HELLDL_FALSE@bin_SCRIPTS = helldl
+
+#----------------------------------------------------------------------
+# The following declarations are only used in the testsuite:
+#----------------------------------------------------------------------
+hardcode_tests = hc-direct hc-libflag hc-libpath hc-minusL
+
+# 'hell0' in EXTRA_PROGRAMS gets translated to 'hell0.exe'; but we
+# must explicitly list the wrapper script 'hell0'.  (bin_PROGRAMS
+# are handled seamlessly by automake rules; the extra step is only
+# necessary for EXTRA_PROGRAMS)
+CLEANFILES = $(hardcode_tests) $(EXTRA_LIBRARIES) $(EXTRA_LTLIBRARIES) \
+	$(EXTRA_PROGRAMS) hell0
+
+# Unfortunately, in order to test libtool thoroughly, we need access
+# to its private directory.
+objdir = `$(LIBTOOL) --config | sed -n -e 's/^objdir=\(.*\)$$/\1/p'`
+SET_HARDCODE_FLAGS = \
+  eval `$(LIBTOOL) --config | sed -n -e '/^hardcode_.*=/p; /^wl=/p'`
+
+
+# This is one of the essential tests for deplibs_check_method=pass_all.
+# If this one passes with pass_all, it is likely that pass_all works
+EXTRA_LIBRARIES = libhell0.a
+libhell0_a_SOURCES = 
+libhell0_a_LIBADD = longer_file_name_hello.$(OBJEXT) longer_file_name_foo.$(OBJEXT)
+EXTRA_LTLIBRARIES = libhell1.la libhell2.la
+libhell1_la_SOURCES = longer_file_name_hell1.c
+libhell1_la_LIBADD = -L. -lhell0
+libhell1_la_LDFLAGS = -no-undefined -rpath $(libdir)
+libhell1_la_DEPENDENCIES = libhell0.a
+libhell2_la_SOURCES = longer_file_name_hell2.c
+libhell2_la_LIBADD = -L. -lhell0
+libhell2_la_LDFLAGS = -no-undefined -rpath $(libdir)
+libhell2_la_DEPENDENCIES = libhell0.a
+hell0_SOURCES = longer_file_name_main.c
+hell0_LDADD = libhell1.la libhell2.la $(LIBM)
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+libhell0.a: $(libhell0_a_OBJECTS) $(libhell0_a_DEPENDENCIES) 
+	-rm -f libhell0.a
+	$(libhell0_a_AR) libhell0.a $(libhell0_a_OBJECTS) $(libhell0_a_LIBADD)
+	$(RANLIB) libhell0.a
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libhell1.la: $(libhell1_la_OBJECTS) $(libhell1_la_DEPENDENCIES) 
+	$(libhell1_la_LINK)  $(libhell1_la_OBJECTS) $(libhell1_la_LIBADD) $(LIBS)
+libhell2.la: $(libhell2_la_OBJECTS) $(libhell2_la_DEPENDENCIES) 
+	$(libhell2_la_LINK)  $(libhell2_la_OBJECTS) $(libhell2_la_LIBADD) $(LIBS)
+libhello.la: $(libhello_la_OBJECTS) $(libhello_la_DEPENDENCIES) 
+	$(libhello_la_LINK) -rpath $(libdir) $(libhello_la_OBJECTS) $(libhello_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+hell$(EXEEXT): $(hell_OBJECTS) $(hell_DEPENDENCIES) 
+	@rm -f hell$(EXEEXT)
+	$(LINK) $(hell_OBJECTS) $(hell_LDADD) $(LIBS)
+hell0$(EXEEXT): $(hell0_OBJECTS) $(hell0_DEPENDENCIES) 
+	@rm -f hell0$(EXEEXT)
+	$(LINK) $(hell0_OBJECTS) $(hell0_LDADD) $(LIBS)
+hell_static$(EXEEXT): $(hell_static_OBJECTS) $(hell_static_DEPENDENCIES) 
+	@rm -f hell_static$(EXEEXT)
+	$(hell_static_LINK) $(hell_static_OBJECTS) $(hell_static_LDADD) $(LIBS)
+helldl$(EXEEXT): $(helldl_OBJECTS) $(helldl_DEPENDENCIES) 
+	@rm -f helldl$(EXEEXT)
+	$(helldl_LINK) $(helldl_OBJECTS) $(helldl_LDADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.c.o:
+	$(COMPILE) -c $<
+
+.c.obj:
+	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(includedir)" && rm -f $$files
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(HEADERS)
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-binSCRIPTS \
+	install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+	uninstall-includeHEADERS uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
+	dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags \
+	distcleancheck distdir distuninstallcheck dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-binSCRIPTS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-includeHEADERS install-info \
+	install-info-am install-libLTLIBRARIES install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-binSCRIPTS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES
+
+# create a script that says that -dlopen is not supported
+@BINARY_HELLDL_FALSE@helldl helldl$(EXEEXT):
+@BINARY_HELLDL_FALSE@	rm -f $@
+@BINARY_HELLDL_FALSE@	echo '#! /bin/sh' > $@
+@BINARY_HELLDL_FALSE@	echo '-dlopen is unsupported' >> $@
+@BINARY_HELLDL_FALSE@	chmod +x $@
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Test programs to see what gets hardcoded.
+.PHONY: hardcode
+hardcode: $(hardcode_tests)
+hc-direct: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@rm -f hc-direct
+	@echo "You may ignore any linking errors from the following command:"
+	@shlib=./$(objdir)/libhello.a; \
+	  eval "`grep '^library_names' libhello.la`"; \
+	  for lib in $$library_names; do \
+	    shlib="./$(objdir)/$$lib"; \
+	  done; \
+	  $(SET_HARDCODE_FLAGS); \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$shlib $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$shlib $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+hc-libflag: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@$(SET_HARDCODE_FLAGS); \
+	  libdir=`pwd`/$(objdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  if test -z "$$flag"; then \
+	    echo "echo unsupported > $@"; \
+	    echo unsupported > $@ || status="$$?"; \
+	  else \
+	    echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$flag -L$(libdir) -lhello $(LIBS) $(LIBM)"; \
+	    $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) $$flag -L$(libdir) -lhello $(LIBS) $(LIBM) || status="$$?"; \
+	  fi; \
+	  exit $$status
+
+hc-libpath: $(hell_OBJECTS) $(hell_DEPENDENCIES) $(libdir)/libhello.la
+	@rm -f hc-libpath
+	@echo "You may ignore any linking errors from the following command:"
+	@$(SET_HARDCODE_FLAGS); \
+	  eval `$(LIBTOOL) --config | grep '^shlibpath_var='`; \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$$shlibpath_var=./$(objdir) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$$shlibpath_var=./$(objdir) $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+hc-minusL: $(hell_OBJECTS) $(hell_DEPENDENCIES)
+	@rm -f hc-minusL
+	@$(SET_HARDCODE_FLAGS); \
+	  libdir=$(libdir); \
+	  flag=`eval echo \"$$hardcode_libdir_flag_spec\"`; \
+	  echo "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -L./$(objdir) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"; \
+	  eval "$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(hell_OBJECTS) -L./$(objdir) -lhello $(LIBS) $(LIBM) $$flag || echo unsupported > $@"
+
+deplibs-check: hell0
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/pdemo/aclocal.m4 b/tests/pdemo/aclocal.m4
new file mode 100644
index 0000000..d479ce3
--- /dev/null
+++ b/tests/pdemo/aclocal.m4
@@ -0,0 +1,956 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../libltdl/m4/libtool.m4])
+m4_include([../../libltdl/m4/ltoptions.m4])
+m4_include([../../libltdl/m4/ltsugar.m4])
+m4_include([../../libltdl/m4/ltversion.m4])
+m4_include([../../libltdl/m4/lt~obsolete.m4])
diff --git a/tests/pdemo/configure b/tests/pdemo/configure
new file mode 100755
index 0000000..c38d30e
--- /dev/null
+++ b/tests/pdemo/configure
@@ -0,0 +1,13555 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for pdemo 1.0.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='pdemo'
+PACKAGE_TARNAME='pdemo'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='pdemo 1.0'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="longer_file_name_hello.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+LIBM
+BINARY_HELLDL_FALSE
+BINARY_HELLDL_TRUE
+STATIC
+LIBTOOL_DEPS
+CPP
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+LIBTOOL
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures pdemo 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/pdemo]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of pdemo 1.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+pdemo configure 1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by pdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in ../../libltdl/config "$srcdir"/../../libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../libltdl/config \"$srcdir\"/../../libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='pdemo'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+enable_dlopen=yes
+
+
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+STATIC=
+test "X$enable_static" = Xyes && STATIC=-static
+
+
+case $lt_cv_sys_global_symbol_pipe in
+  ?*) binary_helldl=yes ;;
+esac
+ if test "X$binary_helldl" = Xyes; then
+  BINARY_HELLDL_TRUE=
+  BINARY_HELLDL_FALSE='#'
+else
+  BINARY_HELLDL_TRUE='#'
+  BINARY_HELLDL_FALSE=
+fi
+
+
+
+## ---------------------------- ##
+## Libraries required by pdemo. ##
+## ---------------------------- ##
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _mwvalidcheckl in -lmw" >&5
+$as_echo_n "checking for _mwvalidcheckl in -lmw... " >&6; }
+if ${ac_cv_lib_mw__mwvalidcheckl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmw  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char _mwvalidcheckl ();
+int
+main ()
+{
+return _mwvalidcheckl ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_mw__mwvalidcheckl=yes
+else
+  ac_cv_lib_mw__mwvalidcheckl=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mw__mwvalidcheckl" >&5
+$as_echo "$ac_cv_lib_mw__mwvalidcheckl" >&6; }
+if test "x$ac_cv_lib_mw__mwvalidcheckl" = xyes; then :
+  LIBM="-lmw"
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="$LIBM -lm"
+fi
+
+  ;;
+*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="-lm"
+fi
+
+  ;;
+esac
+
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${BINARY_HELLDL_TRUE}" && test -z "${BINARY_HELLDL_FALSE}"; then
+  as_fn_error $? "conditional \"BINARY_HELLDL\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by pdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+pdemo config.status 1.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=""
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/tests/pdemo/configure.ac b/tests/pdemo/configure.ac
new file mode 100644
index 0000000..83cb5d4
--- /dev/null
+++ b/tests/pdemo/configure.ac
@@ -0,0 +1,73 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#   Copyright (C) 2001, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AC_PREREQ(2.54)
+
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([pdemo], [1.0], [bug-libtool@gnu.org])
+AC_CONFIG_SRCDIR([longer_file_name_hello.c])
+AC_CONFIG_AUX_DIR([../../libltdl/config])
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE
+
+
+## ------------------ ##
+## C compiler checks. ##
+## ------------------ ##
+AC_PROG_CC
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+LT_INIT([dlopen])
+AC_SUBST([LIBTOOL_DEPS])
+
+STATIC=
+test "X$enable_static" = Xyes && STATIC=-static
+AC_SUBST([STATIC])
+
+case $lt_cv_sys_global_symbol_pipe in
+  ?*) binary_helldl=yes ;;
+esac
+AM_CONDITIONAL([BINARY_HELLDL], [test "X$binary_helldl" = Xyes])
+
+
+## ---------------------------- ##
+## Libraries required by pdemo. ##
+## ---------------------------- ##
+LT_LIB_M
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/tests/pdemo/foo.h b/tests/pdemo/foo.h
new file mode 100644
index 0000000..d08303b
--- /dev/null
+++ b/tests/pdemo/foo.h
@@ -0,0 +1,102 @@
+/* foo.h -- interface to the libfoo library
+
+   Copyright (C) 1996-1999, 2010 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+/* Only include this header file once. */
+#ifndef _FOO_H_
+#define _FOO_H_ 1
+
+/* At some point, cygwin will stop defining __CYGWIN32__, but b19 and
+ * earlier do not define __CYGWIN__.  This snippit allows us to check
+ * for __CYGWIN32__ reliably for both old and (probable) future releases.
+ */
+#ifdef __CYGWIN__
+#  ifndef __CYGWIN32__
+#    define __CYGWIN32__
+#  endif
+#endif
+
+/* __BEGIN_DECLS should be used at the beginning of your declarations,
+   so that C++ compilers don't mangle their names.  Use __END_DECLS at
+   the end of C declarations. */
+#undef __BEGIN_DECLS
+#undef __END_DECLS
+#ifdef __cplusplus
+# define __BEGIN_DECLS extern "C" {
+# define __END_DECLS }
+#else
+# define __BEGIN_DECLS /* empty */
+# define __END_DECLS /* empty */
+#endif
+
+/* LTDL_PARAMS is a macro used to wrap function prototypes, so that compilers
+   that don't understand ANSI C prototypes still work, and ANSI C
+   compilers can issue warnings about type mismatches. */
+#undef LTDL_PARAMS
+#if defined (__STDC__) || defined (_AIX) || (defined (__mips) && defined (_SYSTYPE_SVR4)) || defined(__CYGWIN32__) || defined(__cplusplus)
+# define LT_PARAMS(protos) protos
+# define lt_ptr_t     void*
+#else
+# define LT_PARAMS(protos) ()
+# define lt_ptr_t     char*
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#if (defined _WIN32 || defined _WIN32_WCE) && !defined __GNUC__
+# ifdef BUILDING_LIBHELLO
+#  ifdef DLL_EXPORT
+#   define LIBHELLO_SCOPE extern __declspec (dllexport)
+#  endif
+# else
+#  define LIBHELLO_SCOPE extern __declspec (dllimport)
+# endif
+#endif
+#ifndef LIBHELLO_SCOPE
+# define LIBHELLO_SCOPE extern
+#endif
+
+/* Silly constants that the functions return. */
+#define HELLO_RET 0xe110
+#define FOO_RET 0xf00
+
+
+/* Declarations.  Note the wonderful use of the above macros. */
+__BEGIN_DECLS
+int foo LT_PARAMS((void));
+int foo2 LT_PARAMS((void));
+int hello LT_PARAMS((void));
+LIBHELLO_SCOPE int nothing;
+__END_DECLS
+
+#endif /* !_FOO_H_ */
diff --git a/tests/pdemo/longer_file_name_dlmain.c b/tests/pdemo/longer_file_name_dlmain.c
new file mode 100644
index 0000000..ad223dc
--- /dev/null
+++ b/tests/pdemo/longer_file_name_dlmain.c
@@ -0,0 +1,97 @@
+/* dlmain.c -- hello test program that uses simulated dynamic linking
+
+   Copyright (C) 1996-1999, 2004, 2006, 2007, 2010 Free Software
+   Foundation, Inc.
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+#include <string.h>
+
+#define lt_preloaded_symbols lt__PROGRAM__LTX_preloaded_symbols
+
+typedef struct
+{
+  const char *name;
+  lt_ptr_t address;
+} lt_dlsymlist;
+
+extern LT_DLSYM_CONST lt_dlsymlist lt_preloaded_symbols[];
+
+int
+main (int argc, char **argv)
+{
+  const lt_dlsymlist *s;
+  int (*pfoo)() = 0;
+  int (*phello)() = 0;
+  int *pnothing = 0;
+
+  printf ("Welcome to *modular* GNU Hell!\n");
+
+  /* Look up the symbols we require for this demonstration. */
+  s = lt_preloaded_symbols;
+  while (s->name)
+    {
+      if (s->address) {
+        const char *name = s->name;
+        printf ("found symbol: %s\n", name);
+        if (!strcmp ("hello", name))
+ 	  phello = (int(*)())s->address;
+        else if (!strcmp ("foo", name))
+  	  pfoo = (int(*)())s->address;
+        else if (!strcmp ("nothing", name))
+#ifndef _WIN32
+	  /* In an ideal world we could do this... */
+  	  pnothing = (int*)s->address;
+#else /* !_WIN32 */
+	  /* In an ideal world a shared lib would be able to export data */
+	  pnothing = (int*)&nothing;
+#endif
+      } else
+        printf ("found file: %s\n", s->name);
+      s ++;
+    }
+
+  /* Try assigning to the nothing variable. */
+  if (pnothing)
+    *pnothing = 1;
+  else
+    fprintf (stderr, "did not find the `nothing' variable\n");
+
+  /* Just call the functions and check return values. */
+  if (pfoo)
+    {
+      if ((*pfoo) () != FOO_RET)
+	return 1;
+    }
+  else
+    fprintf (stderr, "did not find the `foo' function\n");
+
+  if (phello)
+    {
+      if ((*phello) () != HELLO_RET)
+	return 3;
+    }
+  else
+    fprintf (stderr, "did not find the `hello' function\n");
+
+  return 0;
+}
diff --git a/tests/pdemo/longer_file_name_foo.c b/tests/pdemo/longer_file_name_foo.c
new file mode 100644
index 0000000..9d92304
--- /dev/null
+++ b/tests/pdemo/longer_file_name_foo.c
@@ -0,0 +1,38 @@
+/* foo.c -- trivial test function for libfoo
+
+   Copyright (C) 1996-1999, 2007, 2010 Free Software Foundation, Inc.
+   Written by Gordon Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+
+#include <stdio.h>
+#include <math.h>
+
+/* Give a global variable definition. */
+int nothing = FOO_RET;
+
+int
+foo ()
+{
+  printf ("cos (0.0) = %g\n", (double) cos ((double) 0.0));
+  return FOO_RET;
+}
diff --git a/tests/pdemo/longer_file_name_foo2.c b/tests/pdemo/longer_file_name_foo2.c
new file mode 100644
index 0000000..65d3bba
--- /dev/null
+++ b/tests/pdemo/longer_file_name_foo2.c
@@ -0,0 +1,35 @@
+/* foo.c -- trivial test function for libfoo
+
+   Copyright (C) 1996-1999, 2007, 2010 Free Software Foundation, Inc.
+   Written by Gordon Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+
+#include <stdio.h>
+#include <math.h>
+
+int
+foo2()
+{
+  printf ("foo2 cos (0.0) = %g\n", (double) cos ((double) 0.0));
+  return FOO_RET;
+}
diff --git a/tests/pdemo/longer_file_name_hell1.c b/tests/pdemo/longer_file_name_hell1.c
new file mode 100644
index 0000000..98025e8
--- /dev/null
+++ b/tests/pdemo/longer_file_name_hell1.c
@@ -0,0 +1,25 @@
+/* longer_file_name_hell1.c -- trivial test function for libfoo
+
+   Copyright (C) 1996 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+  This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+int hell1() { return 1; }
diff --git a/tests/pdemo/longer_file_name_hell2.c b/tests/pdemo/longer_file_name_hell2.c
new file mode 100644
index 0000000..d3468ca
--- /dev/null
+++ b/tests/pdemo/longer_file_name_hell2.c
@@ -0,0 +1,24 @@
+/* longer_file_name_hell2.c -- trivial test function for libfoo
+   Copyright (C) 1996 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+  This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+int hell2() { return 2; }
diff --git a/tests/pdemo/longer_file_name_hello.c b/tests/pdemo/longer_file_name_hello.c
new file mode 100644
index 0000000..a7847fa
--- /dev/null
+++ b/tests/pdemo/longer_file_name_hello.c
@@ -0,0 +1,36 @@
+/* hello.c -- trivial test function for libfoo
+
+   Copyright (C) 1996-1999 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+  This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#define _LIBFOO_COMPILATION
+#include "foo.h"
+#undef _LIBFOO_COMPILATION
+
+#include <stdio.h>
+
+int
+hello ()
+{
+  printf ("** This is not GNU Hello.  There is no built-in mail reader. **\n");
+  return HELLO_RET;
+}
diff --git a/tests/pdemo/longer_file_name_main.c b/tests/pdemo/longer_file_name_main.c
new file mode 100644
index 0000000..572ca4b
--- /dev/null
+++ b/tests/pdemo/longer_file_name_main.c
@@ -0,0 +1,47 @@
+/* main.c -- trivial hello test program
+
+   Copyright (C) 1996-1999, 2006 Free Software Foundation, Inc.
+   Written by Gord Matzigkeit, 1996
+
+   This file is part of GNU Libtool.
+
+GNU Libtool is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation; either version 2 of
+the License, or (at your option) any later version.
+
+GNU Libtool is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Libtool; see the file COPYING.  If not, a copy
+can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+or obtained by writing to the Free Software Foundation, Inc.,
+51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+*/
+
+#include "foo.h"
+#include <stdio.h>
+
+int
+main ()
+{
+  printf ("Welcome to GNU Hell!\n");
+
+  /* Try assigning to the nothing variable */
+  nothing = 1;
+
+  /* Just call the functions and check return values. */
+  if (foo () != FOO_RET)
+    return 1;
+
+   if (foo2() != FOO_RET)
+    return 1;
+
+ if (hello () != HELLO_RET)
+    return 2;
+
+  return 0;
+}
diff --git a/tests/pic_flag.at b/tests/pic_flag.at
new file mode 100644
index 0000000..fb39f7f
--- /dev/null
+++ b/tests/pic_flag.at
@@ -0,0 +1,56 @@
+# pic_flag.at -- override the pic_flag at configure time   -*- Autotest -*-
+
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([override pic_flag at configure time])
+
+# Just try to configure the Libtool package with -fpic if we can compile
+# with it, for C and C++.
+
+AT_DATA([foo.c],
+[[int data = 42;
+int func(void) { return data; }
+]])
+
+cp foo.c foo.cpp
+C_pic_flag='-fpic -DPIC'
+AT_CHECK([$CC $CPPFLAGS $CFLAGS $C_pic_flag -c foo.c || exit 77],
+	 [], [stdout], [stderr])
+# The configure test for the PIC flag also checks for warnings.
+AT_CHECK([grep fpic stdout stderr && exit 77], [1])
+AT_CHECK([[grep '[uU]nknown.*option' stdout stderr && exit 77]], [1])
+
+CXX_pic_flag='-fpic -DPIC'
+if $CXX $CPPFLAGS $CXXFLAGS $CXX_pic_flag -c foo.cpp; then :; else
+  CXX_pic_flag=
+fi
+
+AT_CHECK([test "$at_srcdir" != . || exit 77])
+LT_AT_CONFIGURE([lt_cv_prog_compiler_pic="$C_pic_flag" ]dnl
+		[lt_cv_prog_compiler_pic_CXX="$CXX_pic_flag"],
+		["$abs_top_srcdir"/configure])
+: ${MAKE=make}
+AT_CHECK([$MAKE], [], [stdout], [ignore])
+AT_CHECK([if ./libtool --features | grep 'enable shared libraries'; then ]dnl
+	 [  grep ' -fpic' stdout; else exit 77; fi], [], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/quote.test b/tests/quote.test
new file mode 100755
index 0000000..6a62dac
--- /dev/null
+++ b/tests/quote.test
@@ -0,0 +1,135 @@
+#! /bin/sh
+# quote.test - make sure that shell metacharacters do not blow up libtool
+#
+#   Copyright (C) 2003, 2004, 2005, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+# Do the torture test.
+status=$EXIT_SUCCESS
+
+case $1 in
+  --no-reexec)
+    ;;
+  *)
+    func_get_config "SHELL" "$LIBTOOL --config"
+    exec $SHELL "$0" --no-reexec ${1+"$@"}
+    ;;
+esac
+
+func_get_config "ECHO wl" "$LIBTOOL --config"
+
+for mode in compile link install; do
+  echo "== $mode mode"
+
+  # Unfortunately, without an array data type, it is nearly impossible
+  # to protect libtool from metacharacters in filenames.  So, we just
+  # try metacharacters in the options it needs to pass to other programs.
+
+  # preargs and postargs need to go through libtool unmodified.
+  case "$mode" in
+  compile)
+    preargs="$CC -c"
+    preflag=
+    match_preflag=
+    flag="-DVAR="
+    postargs="foo.c"
+    ;;
+
+  link)
+    preargs="$CC -o hell -g -O"
+    preflag=-Wl,
+    match_preflag="$wl"
+    flag="-someflag="
+    postargs="foo.o"
+    ;;
+
+  install)
+    preargs="install -c"
+    preflag=
+    match_preflag=
+    flag="--something="
+    postargs="hell /usr/local/bin/hell"
+    ;;
+  esac
+
+  # Trivial.
+  echo "= trying: no quoting"
+  result=`$LIBTOOL -n --mode=$mode $preargs ${preflag}"${flag}test" $postargs` || status=$EXIT_FAILURE
+  # We used to have the contents of $match in the case statement,
+  # without an intermediate variable, but it would fail on at least
+  # Solaris' and HP-UX's /bin/sh.  Ugh!
+  # We must not attempt to match $preargs in the output, because libtool
+  # may modify them.  For example, on Cygwin, ``libtool --mode=link gcc -o
+  # foo foo.o''  becomes ``gcc -o foo.exe foo.o''.
+  match="${match_preflag}${flag}test "
+  case "$result" in
+  *"$match"*)
+    $ECHO "= passed: $result"
+    ;;
+  *)
+    $ECHO "= failed: $result"
+    status=$EXIT_FAILURE
+    ;;
+  esac
+
+  # Metacharacters that should be backslashified.
+  for mchar in \\ \" \` \$; do
+    $ECHO "= trying: \\$mchar quoting"
+    result=`$LIBTOOL -n --mode=$mode $preargs ${preflag}"${flag}${mchar}test${mchar}" $postargs` || status=$EXIT_FAILURE
+    match="${match_preflag}${flag}\\${mchar}test\\${mchar} "
+    alt_match="${match_preflag}\"${flag}\\${mchar}test\\${mchar}\" "
+    case "$result" in
+    *"$match"*)
+      $ECHO "= passed: $result"
+      ;;
+    *"$alt_match"*)
+      $ECHO "= passed (harmless ksh bug): $result"
+      ;;
+    *)
+      $ECHO "= failed: $result"
+      status=$EXIT_FAILURE
+      ;;
+    esac
+  done
+
+  # Metacharacters that should be double quoted.
+  for mchar in "[" "]" "~" "#" "^" "&" "*" "(" ")" "{" "}" "|" ";" "<" ">" "?" \
+      "'" " " "	"; do
+
+    $ECHO "= trying: \"$mchar\" quoting"
+    result=`$LIBTOOL -n --mode=$mode $preargs ${preflag}"${flag}${mchar}test${mchar}" $postargs` || status=$EXIT_FAILURE
+    match="${match_preflag}\"${flag}${mchar}test${mchar}\" "
+    case "$result" in
+    *"$match"*)
+      $ECHO "= passed: $result"
+      ;;
+    *)
+      $ECHO "= failed: $result"
+      status=$EXIT_FAILURE
+      ;;
+    esac
+  done
+done
+
+exit $status
diff --git a/tests/recursive.at b/tests/recursive.at
new file mode 100644
index 0000000..f279398
--- /dev/null
+++ b/tests/recursive.at
@@ -0,0 +1,119 @@
+# recursive.at -- test recursive Automake libltdl build       -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Recursive Automake Libltdl.])
+
+# _LT_AT_LTDL_SETUP
+# -----------------
+m4_pushdef([_LT_AT_LTDL_SETUP],
+[AT_DATA([configure.ac],
+[[AC_INIT([subdirectory-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+AC_CONFIG_LIBOBJ_DIR([ltdl])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+LTDL_INIT([recursive])
+AC_CONFIG_FILES([Makefile ltdl/Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],
+[[ACLOCAL_AMFLAGS = -I ltdl/m4
+AUTOMAKE_OPTIONS = 1.7
+SUBDIRS = ltdl
+lib_LTLIBRARIES = foo.la
+foo_la_LDFLAGS = -module -avoid-version -no-undefined
+foo_la_SOURCES = foo.c
+]])
+
+echo 'int dummy = 0;' > foo.c
+])# _LT_AT_LTDL_SETUP
+
+## ------------------------ ##
+## Softlinked libltdl tree. ##
+## ------------------------ ##
+
+AT_SETUP([compiling softlinked libltdl])
+
+_LT_AT_LTDL_SETUP
+
+LT_AT_LIBTOOLIZE([--ltdl])
+AT_CHECK([if test -f ltdl/configure.ac; then false; fi])
+
+LT_AT_AUTORECONF([--force --verbose --install])
+LT_AT_CONFIGURE
+LT_AT_MAKE([all $tst_dist])
+
+AT_CHECK([test -f ltdl/libltdlc.la])
+
+AT_CLEANUP
+
+
+## -------------------- ##
+## Copied libltdl tree. ##
+## -------------------- ##
+
+AT_SETUP([compiling copied libltdl])
+
+_LT_AT_LTDL_SETUP
+
+LT_AT_LIBTOOLIZE([--copy --ltdl])
+AT_CHECK([if test -f ltdl/configure.ac; then false; fi])
+
+LT_AT_AUTORECONF([--force --verbose --install])
+LT_AT_CONFIGURE
+LT_AT_MAKE([all $tst_dist])
+
+AT_CHECK([test -f ltdl/libltdlc.la])
+
+AT_CLEANUP
+
+
+## ------------------------- ##
+## Installable libltdl tree. ##
+## ------------------------- ##
+
+AT_SETUP([installable libltdl])
+
+_LT_AT_LTDL_SETUP
+
+prefix=`pwd`/_inst
+
+LT_AT_LIBTOOLIZE([--copy --ltdl])
+AT_CHECK([if test -f ltdl/configure.ac; then false; fi])
+
+LT_AT_AUTORECONF([--force --verbose --install])
+LT_AT_CONFIGURE([--enable-ltdl-install --prefix=$prefix])
+LT_AT_MAKE([all install $tst_dist])
+
+AT_CHECK([test -f $prefix/lib/libltdl.la])
+AT_CHECK([test -f $prefix/include/ltdl.h])
+
+AT_CLEANUP
+
+dnl Be careful not to let the definition leak into other tests
+m4_popdef([_LT_AT_LTDL_SETUP])
diff --git a/tests/resident.at b/tests/resident.at
new file mode 100644
index 0000000..cf00688
--- /dev/null
+++ b/tests/resident.at
@@ -0,0 +1,148 @@
+# resident.at -- test resident modules              -*- Autotest -*-
+
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Ensure resident modules are not unloaded at program exit:
+# they need to be able to invoke atexit handlers.
+
+AT_SETUP([resident modules])
+AT_KEYWORDS([libltdl])
+
+AT_DATA([main.c],
+[[#include <ltdl.h>
+#include <stdio.h>
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle plugin_handle;
+  lt_dladvise advise;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (argc < 2)
+    {
+      fprintf (stderr, "usage: %s plugin\n", argv[0]);
+      return 1;
+    }
+
+  lt_dlinit ();
+  if (lt_dladvise_init (&advise) != 0
+      || lt_dladvise_ext (&advise) != 0
+      || lt_dladvise_resident (&advise) != 0)
+    {
+      printf ("advise failure: %s\n", lt_dlerror ());
+      err = 1;
+    }
+  else
+    {
+      plugin_handle = lt_dlopenadvise (argv[1], advise);
+      if (NULL != plugin_handle)
+	{
+	  int (*pf) (void);
+	  printf ("plugin opened successfully!\n");
+	  pf = (int (*) (void)) lt_dlsym (plugin_handle, "setup_plugin");
+	  if (pf)
+	    pf ();
+	  else
+	    {
+	      printf ("dlsym failure: %s\n", lt_dlerror ());
+	      err = 1;
+	    }
+	  if (!lt_dlisresident (plugin_handle))
+	    {
+	      printf ("module wrongly not marked resident\n");
+	      err = 1;
+	    }
+	  if (lt_dlclose (plugin_handle) != 0)
+	    {
+	      printf ("close failure (expected): %s\n", lt_dlerror ());
+	    }
+	  else
+	    {
+	      printf ("wrongly closed resident module\n");
+	      err = 1;
+	    }
+	}
+      else
+	{
+	  printf ("plugin failed to open: %s\n", lt_dlerror ());
+	  err = 1;
+	}
+      if (lt_dladvise_destroy (&advise) != 0)
+	{
+	  printf ("advise destroy failure: %s\n", lt_dlerror ());
+	  err = 1;
+	}
+    }
+  lt_dlexit ();
+  return err;
+}
+]])
+
+AT_DATA([plugin.c],
+[[#include <stdlib.h>
+#include <stdio.h>
+
+void
+bye (void)
+{
+  puts ("called from atexit handler");
+}
+
+#ifdef __cplusplus
+extern "C"
+#endif
+int
+setup_plugin (void)
+{
+  atexit (bye);
+}
+]])
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+AT_CHECK([case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac], [], [ignore])
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+inst=`pwd`/inst
+libdir=$inst/lib
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c main.c], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c plugin.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o plugin.la -rpath $libdir ]dnl
+	 [-module -avoid-version plugin.lo], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ]dnl
+	 [-dlopen plugin.la $LIBLTDL],
+	 [], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./main], [], [stdout], [ignore], [./plugin.la])
+AT_CHECK([grep 'called from atexit handler' stdout], [], [ignore])
+
+AT_CLEANUP
diff --git a/tests/runpath-in-lalib.at b/tests/runpath-in-lalib.at
new file mode 100644
index 0000000..f7667f2
--- /dev/null
+++ b/tests/runpath-in-lalib.at
@@ -0,0 +1,66 @@
+# runpath-in-lalib.at --                         -*- Autotest -*-
+
+#   Copyright (C) 2007, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2007
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([Runpath in libtool library files])
+AT_KEYWORDS([libtool])
+
+AT_DATA([a.c],
+[[int a () { return 0; }
+]])
+AT_DATA([b.c],
+[[extern int a ();
+int b () { return a (); }
+]])
+AT_DATA([m.c],
+[[extern int b ();
+int main () { return b (); }
+]])
+
+instdir=`pwd`/inst
+libdir=$instdir/lib
+bindir=$instdir/bin
+addrunpath=`pwd`/foobar
+
+mkdir $instdir $libdir $bindir
+
+for file in a.c b.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+$CC $CPPFLAGS $CFLAGS -c m.c
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir -R$addrunpath],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la b.lo -rpath $libdir liba.la],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT m.$OBJEXT libb.la],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp liba.la $libdir/liba.la], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp libb.la $libdir/libb.la], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp m$EXEEXT $bindir/m$EXEEXT], [], [ignore], [ignore])
+
+AT_CHECK([grep /foobar $libdir/liba.la], [], [ignore])
+AT_CHECK([grep /foobar $libdir/libb.la], [], [ignore])
+
+# TODO: check that m gets -R, too.
+
+AT_CLEANUP
diff --git a/tests/search-path.at b/tests/search-path.at
new file mode 100644
index 0000000..28df443
--- /dev/null
+++ b/tests/search-path.at
@@ -0,0 +1,97 @@
+# search-path.at -- test sys_lib_search_path_spec             -*- Autotest -*-
+#
+#   Copyright (C) 2006, 2008, 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([sys_lib_search_path])
+AT_KEYWORDS([libtool])
+LDFLAGS="$LDFLAGS -no-undefined"
+
+AT_DATA([main.c],
+[[extern
+#ifdef __cplusplus
+"C"
+#endif
+int inflate ();
+int main()
+{
+  return inflate ();
+}
+]])
+
+$CC $CPPFLAGS $CFLAGS -c main.c
+eval `$LIBTOOL --config | $EGREP '^(sys_lib_search_path_spec)='`
+eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+no_libz=:
+for path in $sys_lib_search_path; do
+  if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -L$path -lz
+  then
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -lz],
+             [], [ignore], [ignore])
+    no_libz=false
+    break
+  fi
+done
+
+# If -lz doesn't exist (hello, cross compiler!), we need a dummy test.
+if $no_libz; then
+  AT_CHECK([exit 77])
+fi
+
+AT_CLEANUP
+
+
+AT_SETUP([sys_lib_search_path on w32])
+AT_KEYWORDS([libtool])
+
+# Check if libtool knows the path to system libraries.  Using
+# a w32 system library since the test is designed to check if
+# the libtool handling of the sys_lib_search_path variable is
+# correct for MSVC.
+
+LDFLAGS="$LDFLAGS -no-undefined"
+
+AT_DATA([gc.c],
+[[#include <windows.h>
+HCURSOR get_cursor (void)
+{
+  return GetCursor ();
+}
+]])
+
+eval "`$LIBTOOL --config | grep '^build_libtool_libs='`"
+AT_CHECK([test "$build_libtool_libs" = yes || exit 77])
+
+AT_CHECK([$LIBTOOL --mode=compile --tag=CC \
+	  $CC $CPPFLAGS $CFLAGS -o gc.lo -c gc.c || exit 77],
+	 [], [ignore], [ignore])
+
+# Ok, compile was fine, then it should be possible to link too.
+
+AT_CHECK([$LIBTOOL --mode=link --tag=CC --tag=disable-static \
+	  $CC $CFLAGS $LDFLAGS -o libgc.la gc.lo -rpath /nowhere -luser32],
+	 [], [ignore], [ignore])
+
+# If -luser32 was found, then libtool will build a shared library,
+# otherwise libtool will fall back to creating a static library.
+AT_CHECK([grep old_library=\'\' libgc.la], [], [ignore])
+
+AT_CLEANUP
diff --git a/tests/sh.test b/tests/sh.test
new file mode 100755
index 0000000..5324b31
--- /dev/null
+++ b/tests/sh.test
@@ -0,0 +1,134 @@
+#! /bin/sh
+# sh.test - check for some nonportable or dubious or undesired shell
+#           constructs in shell scripts.
+#
+#   Copyright (C) 2003, 2004, 2005, 2006, 2007, 2008, 2010 Free
+#   Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+# Check all the "portable" shell scripts.
+status=$EXIT_SUCCESS
+
+# Check for bad binary operators.
+if $EGREP -n -e 'if[ 	]+["'\'']?\$[^ 	]+[ 	]+(=|-[lg][te]|-eq|-ne)' $scripts; then
+  echo "use \`if test \$something =' instead of \`if \$something ='"
+  status=$EXIT_FAILURE
+fi
+
+# Check for bad unary operators.
+if $EGREP -n -e 'if[ 	]+-' $scripts; then
+  echo "use \`if test -X' instead of \`if -X'"
+  status=$EXIT_FAILURE
+fi
+
+# Check for using `[' instead of `test'.
+if $EGREP -n -e 'if[ 	]+\[' $scripts; then
+  echo "use \`if test' instead of \`if ['"
+  status=$EXIT_FAILURE
+fi
+
+# Check for using test X... instead of test "X...
+if $EGREP -n -e 'test[ 	]+(![ 	])?(-.[ 	]+)?X' $scripts; then
+  echo "use \`test \"X...\"' instead of \`test X'"
+  status=$EXIT_FAILURE
+fi
+
+# Check for using test $... instead of test "$...
+if $EGREP -n -e 'test[ 	]+(![ 	])?(-.[ 	]+)?X?\$' $scripts; then
+  echo "use \`test \"\$...\"' instead of \`test \$'"
+  status=$EXIT_FAILURE
+fi
+
+# Never use test -e.
+if $EGREP -n -e 'test[ 	]+(![ 	])?-e' $scripts; then
+  echo "use \`test -f' instead of \`test -e'"
+  status=$EXIT_FAILURE
+fi
+
+# Check for uses of Xsed without corresponding echo "X
+if $EGREP -n -e '\$Xsed' $scripts | $EGREP -v -n -e '\$ECHO \\*"X'; then
+  echo "occurrences of \`\$Xsed\' without \`echo \"X\' on the same line"
+  status=$EXIT_FAILURE
+fi
+
+# Check for quotes within backquotes within quotes "`"bar"`"
+if $EGREP -n -e '"[^`"]*`[^"`]*"[^"`]*".*`[^`"]*"' $scripts | \
+   $EGREP -v "### testsuite: skip nested quoting test$"; then
+  echo "nested quotes are dangerous"
+  status=$EXIT_FAILURE
+fi
+
+# Check for using set -- instead of set dummy
+if $EGREP -n -e 'set[ 	]+--[ 	]+' $scripts; then
+  echo "use \`set dummy ...' instead of \`set -- ...'"
+  status=$EXIT_FAILURE
+fi
+
+# Check for using shift after set dummy (same or following line).
+for s in $scripts
+do
+  if $SED -n '
+      /set[ 	][ 	]*dummy/{
+	  /set.*dummy.*;.*shift/d
+	  N
+	  /\n.*shift/D
+	  p
+      }' "$s" | $EGREP .; then
+    echo "use \`shift' after \`set dummy' in $s"
+    status=$EXIT_FAILURE
+  fi
+done
+
+# Check for opening brace on next line in shell function definition.
+# redirect stderr so we also barf when sed issues diagnostics.
+for s in $scripts
+do
+  if $SED -n '
+      /^func_.*(/{
+	  N
+	  /^func_[^ 	]* ()\n{$/d
+	  p
+      }' "$s" 2>&1 | $EGREP .; then
+    echo "Function definitions should look like this in $s:
+func_foo ()
+{
+  # ...
+}"
+    status=$EXIT_FAILURE
+  fi
+done
+
+# Check for correct usage of $cc_basename.
+# redirect stderr so we also barf when sed issues diagnostics.
+for s in "$m4dir/libtool.m4"
+do
+  if $SED -n '/case \$cc_basename in/,/esac/ {
+	      /^[ 	]*[a-zA-Z][a-zA-Z0-9+]*[^*][ 	]*)/p
+  	      }'  $s 2>&1 | $EGREP .; then
+    echo "\$cc_basename matches should include a trailing \`*' in $s."
+    status=$EXIT_FAILURE
+  fi
+done
+
+exit $status
diff --git a/tests/shlibpath.at b/tests/shlibpath.at
new file mode 100644
index 0000000..eea059b
--- /dev/null
+++ b/tests/shlibpath.at
@@ -0,0 +1,73 @@
+# shlibpath.at -- Test shlibpath settings                     -*- Autotest -*-
+#
+#   Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2006
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([shlibpath_overrides_runpath])
+AT_KEYWORDS([libtool])
+
+mkdir sub sub/lib sub/bin
+echo 'int a () { return 0; }' > a.c
+echo 'extern int a (); int main () { return a(); }' > m.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath `pwd`/sub/lib
+$LIBTOOL --mode=install cp liba.la `pwd`/sub/lib/liba.la
+$LIBTOOL --mode=clean rm -f liba.la
+rm -f sub/lib/liba.la
+
+$CC $CPPFLAGS $CFLAGS -c m.c
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT m.$OBJEXT -Lsub/lib -la -R`pwd`/sub/lib],
+         [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m2$EXEEXT m.$OBJEXT -Lsub/lib -la],
+         [], [ignore], [ignore])
+
+LT_AT_MVDIR([sub], [moved])
+mkdir sub sub/lib sub/bin
+echo 'int wrong_lib () { return 0; }' > a.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath `pwd`/sub/lib
+$LIBTOOL --mode=install cp liba.la `pwd`/sub/lib/liba.la
+$LIBTOOL --mode=clean rm -f liba.la
+
+eval `$LIBTOOL --config | $EGREP '^(shlibpath_var|shlibpath_overrides_runpath)='`
+
+# No point checking a system with static libraries:
+LT_AT_EXEC_CHECK([./m], [1], [ignore], [ignore], [|| exit 1 && exit 77])
+
+if test "$shlibpath_var" = PATH; then
+  addpath=`pwd`/moved/bin
+else
+  addpath=`pwd`/moved/lib
+fi
+sep=
+eval test -n \"\$$shlibpath_var\" && sep=:
+eval $shlibpath_var='$addpath$sep$'$shlibpath_var
+export $shlibpath_var
+if test "$shlibpath_overrides_runpath" != no; then
+  LT_AT_EXEC_CHECK([./m], [0], [ignore], [ignore])
+else
+  LT_AT_EXEC_CHECK([./m], [1], [ignore], [ignore], [|| exit 1])
+fi
+# Test that shlibpath_var is effective in adding paths at all:
+LT_AT_EXEC_CHECK([./m2], [0], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/slist.at b/tests/slist.at
new file mode 100644
index 0000000..741410c
--- /dev/null
+++ b/tests/slist.at
@@ -0,0 +1,168 @@
+# slist.at -- test slist.c                   -*- Autotest -*-
+#
+#   Copyright (C) 2009 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([SList functionality])
+
+AT_DATA([test-slist.c], [[
+#include <config.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include <stdio.h>
+#include "slist.h"
+
+void *find_string (SList *item, void *data)
+{
+  if (data != NULL && !strcmp ((const char *) item->userdata, (const char *)data))
+    return item;
+  else
+    return NULL;
+}
+
+void boxed_delete (void *item)
+{
+  free (slist_unbox ((SList *) item));
+}
+
+void *print_item (SList *item, void *userdata)
+{
+  userdata = userdata; /* unused */
+  printf ("%s\n", (const char*)item->userdata);
+  return NULL;
+}
+
+int list_compare (const SList *item1, const SList *item2, void *userdata)
+{
+  userdata = userdata;
+  return strcmp ((const char *) item1->userdata, (const char *)item2->userdata);
+}
+
+int main ()
+{
+  int i;
+  SList *empty_list = NULL, *list = NULL, *item, *list_save;
+  char *data = NULL;
+
+  /* slist_cons */
+  list = slist_cons (NULL, NULL);
+
+  for (i=0; i < 10; ++i) {
+    data = (char *) malloc (42);
+    assert (data);
+    sprintf (data, "foo%d", i);
+    list = slist_cons (slist_box (data), list);
+  }
+  list_save = list;
+  list = slist_cons (NULL, list);
+  assert (list == list_save);
+
+
+  /* slist_find */
+  assert (slist_find (NULL, find_string, (void *) "whatever") == NULL);
+  assert (slist_find (empty_list, find_string, (void *) "whatever") == NULL);
+  assert (slist_find (list, find_string, (void *) "foo10") == NULL);
+  item = (SList *) slist_find (list, find_string, (void *) "foo1");
+  assert (item != NULL);
+  assert (!strcmp ((const char *) item->userdata, "foo1"));
+
+  item = slist_nth (list, 10);
+  assert (item != NULL && !strcmp ((const char *) item->userdata, "foo0"));
+
+  puts ("list as inserted:");
+  slist_foreach (list, print_item, NULL);
+  puts ("reversed list:");
+  list = slist_reverse (list);
+  slist_foreach (list, print_item, NULL);
+
+  item = slist_nth (list, 1);
+  assert (item != NULL && !strcmp ((const char *) item->userdata, "foo0"));
+
+  assert (10 == slist_length (list));
+
+  /* slist_tail is the second item, not the last one */
+  item = slist_tail (list);
+  assert (item != NULL && !strcmp ((const char *) item->userdata, "foo1"));
+
+  assert (slist_tail (slist_nth (list, 10)) == NULL);
+
+  /* slist_sort and implicitly, slist_sort_merge */
+  assert (slist_sort (NULL, list_compare, NULL) == NULL);
+  list = slist_sort (list, list_compare, NULL);
+  puts ("list after no-op sort:");
+  slist_foreach (list, print_item, NULL);
+
+  list = slist_reverse (list);
+  puts ("reversed list:");
+  slist_foreach (list, print_item, NULL);
+  puts ("sorting reversed list:");
+  list = slist_sort (list, list_compare, NULL);
+  slist_foreach (list, print_item, NULL);
+
+  /* slist_remove */
+  assert (slist_remove (NULL, find_string, NULL) == NULL);
+  assert (slist_remove (&empty_list, find_string, NULL) == NULL);
+
+  list_save = list;
+  assert (slist_remove (&list, find_string, NULL) == NULL);
+  assert (list_save == list);
+
+  /* remove entries: middle, last, first, not present */
+  /* slist_reverse above has left us with increasing order */
+  list_save = list;
+  item = slist_remove (&list, find_string, (void *) "foo5");
+  assert (list_save == list);
+  assert (item != NULL && !strcmp (data = (char *) slist_unbox (item), "foo5"));
+  free (data);
+
+  list_save = list;
+  item = slist_remove (&list, find_string, (void *) "foo9");
+  assert (list_save == list);
+  assert (item != NULL && !strcmp (data = (char *) slist_unbox (item), "foo9"));
+  free (data);
+
+  list_save = list;
+  item = slist_remove (&list, find_string, (void *) "foo0");
+  assert (list_save != list);
+  assert (item != NULL && !strcmp (data = (char *) slist_unbox (item), "foo0"));
+  free (data);
+
+  list_save = list;
+  item = slist_remove (&list, find_string, (void *) "foo5");
+  assert (list_save == list);
+  assert (item == NULL);
+
+  assert (slist_delete (list, boxed_delete) == NULL);
+  return 0;
+}
+]])
+
+CPPFLAGS="-I$top_srcdir/libltdl -I$top_srcdir/libltdl/libltdl -I$abs_top_builddir"
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c test-slist.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c $top_srcdir/libltdl/slist.c],
+	 [], [ignore], [ignore])
+AT_CHECK([$CC $CFLAGS $LDFLAGS -o test-slist test-slist.$OBJEXT slist.$OBJEXT],
+	 [], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./test-slist], [], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/standalone.at b/tests/standalone.at
new file mode 100644
index 0000000..39b77c4
--- /dev/null
+++ b/tests/standalone.at
@@ -0,0 +1,89 @@
+# standalone.at -- test standalone libltdl builds             -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2006
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Standalone Libltdl.])
+
+## ------------------------ ##
+## Softlinked libltdl tree. ##
+## ------------------------ ##
+
+AT_SETUP([compiling softlinked libltdl])
+
+LT_AT_CHECK_LIBTOOLIZE([--ltdl=.], [], [ignore])
+LT_AT_CONFIGURE
+LT_AT_MAKE([all $tst_dist])
+
+AT_CHECK([test -f libltdlc.la])
+
+AT_CLEANUP
+
+
+## -------------------- ##
+## Copied libltdl tree. ##
+## -------------------- ##
+
+AT_SETUP([compiling copied libltdl])
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --ltdl=.], [], [ignore])
+LT_AT_CONFIGURE
+LT_AT_MAKE([all $tst_dist])
+
+AT_CHECK([test -f libltdlc.la])
+
+AT_CLEANUP
+
+
+## ------------------------- ##
+## Installable libltdl tree. ##
+## ------------------------- ##
+
+AT_SETUP([installable libltdl])
+
+prefix=`pwd`/_inst
+
+LT_AT_CHECK_LIBTOOLIZE([--copy --ltdl=.], [], [ignore])
+LT_AT_CONFIGURE([--enable-ltdl-install --prefix=$prefix])
+LT_AT_MAKE([all install $tst_dist])
+
+AT_CHECK([test -f $prefix/lib/libltdl.la])
+AT_CHECK([test -f $prefix/include/ltdl.h])
+
+AT_CLEANUP
+
+
+## ----------------------------------------------- ##
+## libltdl is usable without Autoconf or Automake. ##
+## ----------------------------------------------- ##
+
+AT_SETUP([linking libltdl without autotools])
+
+_LTDL_PROJECT_FILES([libltdl])
+LT_AT_CHECK_LIBTOOLIZE([--copy --ltdl], [], [ignore])
+LT_AT_MAKE([], [CC="$CC" LIBTOOLFLAGS="$LIBTOOLFLAGS" CPPFLAGS="$CPPFLAGS" ]dnl
+        [CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS" ]dnl
+	[CONFIGURE_OPTIONS="$configure_options"])
+
+LT_AT_EXEC_CHECK([./ltdldemo], 0, [ignore])
+
+AT_CLEANUP
diff --git a/tests/static.at b/tests/static.at
new file mode 100644
index 0000000..dfa4c42
--- /dev/null
+++ b/tests/static.at
@@ -0,0 +1,378 @@
+# static.at -- test flags for static/dynamic linking          -*- Autotest -*-
+#
+#   Copyright (C) 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2006
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+##### NOTES #####
+#
+# - How do we test whether a library was linked statically?
+#   We could
+#   - try $NM on the program to see whether it includes the symbol definitions.
+#     disadvantage: for uninstalled programs, we may need to find out the name
+#     of the _real_ linked-against-uninstalled executable
+#     (.libs/prog vs .libs/lt-prog etc).
+#   - simply remove the libraries before execution.  If the program still works,
+#     then the library was linked statically.
+#     -Does this work on all systems?
+#     -No, it will fail on AIX with non-rtl-created libraries: plain `-static'
+#     will only cause the linker not to consider `*.so' libraries, but only
+#     `*.a'.  The latter, however, may still be shared images.  :-/
+#     `-all-static' still works, however.
+#   
+#     It will not work with dlpreloading until we fix its related bug.
+#   
+#   Let's try the latter until we know better.
+
+# - Test -Bstatic/-Bdynamic.  It should work with all of:
+#   - (un)installed libtool libraries
+#   - non-libtool libraries
+#   - direct or pulled-in libraries
+#   - libraries of which there are only one kind available (TODO)
+#     (in the static case, should having only the shared one provoke failure?)
+
+# - Check no extraneous run paths have been added.
+
+# - make sure -Bstatic/-Bdynamic cannot be mixed with -all-static (TODO)
+
+# - should -Bstatic/-Bdynamic be mixable with -static or -static-libtool-libs?
+#   Semantics could be as follows:
+#   - `-static'/`-static-libtool-libs' set the default which is the initial
+#     value, then `-Bstatic'/`-Bdynamic' override that
+#   - `-Bdefault' resets to the default value given by the other switches.
+
+# - TODO: test exposure for dlopened and dlpreopened modules,
+#   without and with diverse static flag combinations.
+
+# - TODO: test other tags: C++ etc.
+#   (most likely the Sun compiler suite will be the only problem child).
+
+AT_SETUP([static linking flags for programs])
+AT_KEYWORDS([libtool])
+AT_KEYWORDS([interactive])dnl Some of the exec_fail test cause popups with MinGW.
+
+LDFLAGS="$LDFLAGS -no-undefined"
+prefix=`pwd`/inst
+bindir=$prefix/bin
+prefix1=`pwd`/inst1
+prefix2=`pwd`/inst2
+prefix3=`pwd`/inst3
+libdir1=$prefix1/lib
+libdir2=$prefix2/lib
+libdir3=$prefix3/lib
+srcdir_broken=`pwd`/broken-src
+prefix_broken=`pwd`/broken
+libdir_broken=$prefix_broken/lib
+bindir_broken=$prefix_broken/bin
+
+have_static=false
+have_shared=false
+per_deplib=false
+$LIBTOOL --features | grep 'enable static libraries' >/dev/null && have_static=:
+$LIBTOOL --features | grep 'enable shared libraries' >/dev/null && have_shared=:
+eval `$LIBTOOL --config |
+        $EGREP '^(per_deplib_(static|dynamic)_flag|shlibpath_var|link_static_flag)='`
+if test -n "$per_deplib_static_flag" && test -n "$per_deplib_dynamic_flag"; then
+  per_deplib=:
+fi
+# On GNU/Linux with --disable-static, m-all-static fails to link.
+# What we'd like to state here is: if the user actively passed
+# --disable-static (as opposed to: the libtool.m4 macros set
+# enable_static=no), then they cannot expect -all-static to work.
+# So we punt, knowing that we mangle enable_static on AIX only.
+can_link_all_static=-all-static
+case $host_os,$have_static,$link_static_flag in
+  aix*) ;;
+  *,false,?*) can_link_all_static= ;;
+esac
+
+# Create broken libraries.  They will later be moved to those
+# directories where the respective libraries should be linked
+# statically from.  This detects both failure to link statically
+# and failure to omit extraneous run paths.
+mkdir $srcdir_broken $prefix_broken $libdir_broken
+(
+  cd $srcdir_broken
+  echo 'int this_should_not_be_linked_against() { return 0; }' > a.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+  for i in 1 1dep 2 2dep 3 3dep; do
+    $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la a.lo -rpath $libdir_broken
+    $LIBTOOL --mode=install cp liba$i.la $libdir_broken/liba$i.la
+  done
+)
+
+func_fix_path ()
+{
+  # For w32, hardcoding cannot work, but $libdir/../bin is where binaries
+  # usually are installed.  Since we use several prefixes for testing
+  # convenience -- it allows us to replace the good libraries easily with
+  # broken ones and vice versa -- we have to set PATH to find them.
+  # Since OTOH we put broken libs of all names in the "moved" prefixes,
+  # we have to ensure that this prefix comes last: otherwise we may link
+  # against a broken library but the good one would come later in the PATH.
+  # So we let the caller of this function set the order: the "other" two
+  # come first.
+  if test "$shlibpath_var" = PATH; then
+    save_PATH=$PATH
+    sep=
+    test -z "$PATH" || sep=:
+    PATH=${2}/bin:${3}/bin:${1}/bin$sep$PATH
+  fi
+
+}
+
+func_restore_path ()
+{
+  if test "$shlibpath_var" = PATH; then
+    PATH=$save_PATH
+  fi
+}
+
+# func_move_libs srcdir_to_move prefix_to_move other_prefix other_prefix
+func_move_libs ()
+{
+  LT_AT_MVDIR(["${1}"], ["${1}-moved"])
+  LT_AT_MVDIR(["${2}"], ["${2}-moved"])
+  LT_AT_MVDIR(["$srcdir_broken"], ["${1}"])
+  LT_AT_MVDIR(["$prefix_broken"], ["${2}"])
+  func_fix_path ${2} ${3} ${4}
+}
+
+# func_restore_libs srcdir_to_restore prefix_to_restore
+func_restore_libs ()
+{
+  func_restore_path
+  LT_AT_MVDIR(["${2}"], ["$prefix_broken"])
+  LT_AT_MVDIR(["${1}"], ["$srcdir_broken"])
+  LT_AT_MVDIR(["${2}-moved"], ["${2}"])
+  LT_AT_MVDIR(["${1}-moved"], ["${1}"])
+}
+
+# make sure the program can be run.
+func_test_exec ()
+{
+  # On AIX without runtimelinking, this does not make sense.
+  if $have_static; then
+    echo "## The following should succeed:"
+    for st
+    do
+      echo "# m$st"
+      LT_AT_EXEC_CHECK([./m$st])
+      # For some per-deplib flag combinations there may be no installed program,
+      # because liba2 is not yet installed.
+      if test -f "$bindir/m${st}$EXEEXT"; then
+	LT_AT_EXEC_CHECK([$bindir/m$st])
+      fi
+    done
+  fi
+}
+
+# make sure the program cannot be run.
+func_test_exec_fail ()
+{
+  # No point in testing if we're linking statically anyway.
+  # TODO: Maybe in the `else' case we could test for success?
+  if $have_shared; then
+    echo "## The following should fail:"
+    for st
+    do
+      echo "# m$st"
+      LT_AT_EXEC_CHECK([./m$st], [1], [], [ignore], [|| (exit 1)])
+      # For some per-deplib flag combinations there may be no installed program,
+      # because liba2 is not yet installed.
+      if test -f "$bindir/m${st}$EXEEXT"; then
+	LT_AT_EXEC_CHECK([$bindir/m$st], [1], [], [ignore], [|| (exit 1)])
+      fi
+    done
+  fi
+}
+
+
+# Try three independent libraries,
+#   one installed libtool library,
+#   one uninstalled libtool library,
+#   one non-libtool library,
+# the libtool libraries each having a dependency, or not.
+# Try both an uninstalled and the corresponding installed program.
+
+for withdep in no yes; do
+  echo
+  echo "### libraries with dependencies: $withdep"
+  rm -rf src $prefix $prefix1 $prefix2 $prefix3
+  mkdir src $prefix $bindir $prefix1 $prefix2 $prefix3
+  cd src
+
+  ### build the libraries.
+  for i in 1 2 3; do
+    eval ldir=\$libdir$i
+    mkdir a$i $ldir
+    cd a$i
+    case $withdep,$i in
+    no,* | yes,3)
+      echo "int a$i() { return 0; }" > a$i.c
+      $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a$i.c
+      $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la a$i.lo -rpath $ldir
+      ;;
+    *)
+      echo "int a${i}dep() { return 0; }" > a${i}dep.c
+      $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a${i}dep.c
+      $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba${i}dep.la a${i}dep.lo -rpath $ldir
+      echo "extern int a${i}dep(); int a$i() { return a${i}dep(); }" > a$i.c
+      $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a$i.c
+      $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la a$i.lo -rpath $ldir ./liba${i}dep.la
+      ;;
+    esac
+    cd ..
+  done
+
+  ### install the libraries.
+  test "$withdep" = yes && $LIBTOOL --mode=install cp a1/liba1dep.la $libdir1/liba1dep.la
+  $LIBTOOL --mode=install cp a1/liba1.la $libdir1/liba1.la
+  $LIBTOOL --mode=install cp a3/liba3.la $libdir3/liba3.la
+  $LIBTOOL --mode=clean rm -f a1/liba1.la a3/liba3.la
+  test "$withdep" = yes && $LIBTOOL --mode=clean rm -f a1/liba1dep.la 
+  # simulate a non-libtool lib:
+  rm -f $libdir3/liba3.la
+
+
+  ### build the programs.
+  echo 'extern int a1(), a2(), a3();
+  int main() { return a1() + a2() + a3(); }' > m.c
+  $CC $CPPFLAGS $CFLAGS -c m.c
+
+  # global static flags.
+  for st in -static -static-libtool-libs $can_link_all_static; do
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o m${st}$EXEEXT m.$OBJEXT \
+	-L$libdir1 -la1 a2/liba2.la -L$libdir3 -R$libdir3 -la3],
+       [0], [ignore], [ignore])
+  done
+
+  # per-deplib static/shared flags.
+  # also try a bit redundant flags, and shuffled order (for run paths check).
+  if $per_deplib; then
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m1$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 -Bdynamic a2/liba2.la -L$libdir3 -R$libdir3 -la3],
+	     [0], [ignore], [ignore])
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m2$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -la1 -Bstatic a2/liba2.la -Bdynamic -L$libdir3 -R$libdir3 -la3],
+	     [0], [ignore], [ignore])
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m3$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -la1 a2/liba2.la -L$libdir3 -Bstatic -la3 -Bdynamic],
+	     [0], [ignore], [ignore])
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m12$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 a2/liba2.la -Bdynamic -L$libdir3 -R$libdir3 -la3],
+	      [0], [ignore], [ignore])
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m13$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 -Bdynamic a2/liba2.la \
+	      -L$libdir3 -Bstatic -la3 -Bdynamic],
+	      [0], [ignore], [ignore])
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m31$EXEEXT m.$OBJEXT \
+	      -L$libdir3 -Bstatic -la3 -Bdynamic a2/liba2.la \
+	      -L$libdir1 -Bstatic -la1 -Bdynamic],
+	      [0], [ignore], [ignore])
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m23$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -la1 -Bstatic a2/liba2.la -Bdynamic \
+	      -L$libdir3 -Bstatic -la3 -Bdynamic],
+	      [0], [ignore], [ignore])
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m123$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 a2/liba2.la -L$libdir3 -la3 -Bdynamic],
+	      [0], [ignore], [ignore])
+    AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m123a$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 -Bdynamic -Bstatic a2/liba2.la -Bdynamic \
+	      -Bstatic -L$libdir3 -la3 -Bdynamic],
+	      [0], [ignore], [ignore])
+    dnl # This usually fails.  So don't do it.
+    dnl AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m123b$EXEEXT m.$OBJEXT \
+    dnl 	 -L$libdir1 -Bstatic -la1 a2/liba2.la -L$libdir3 -la3],
+    dnl 	 [0], [ignore], [ignore])
+  fi
+
+  ### install the programs.
+  # We can't install any program that links dynamically against liba2.
+  for st in -static -static-libtool-libs $can_link_all_static `$per_deplib && echo 2 12 23 123 123a`; do 
+    echo "# m$st"
+    AT_CHECK([$LIBTOOL --mode=install cp m${st}$EXEEXT $bindir/m${st}$EXEEXT], [0], [ignore], [stderr])
+    if $have_static; then
+      AT_CHECK([$EGREP 'relinking|has not been installed' stderr], [1], [], [])
+    fi
+  done
+  dnl AT_CHECK([$LIBTOOL --mode=install cp m123b$EXEEXT $bindir/m123b$EXEEXT], [0], [ignore], [ignore])
+
+
+  ### Run each program once so that relinking has happened.
+  
+  func_fix_path $prefix1 $prefix2 $prefix3
+  func_test_exec -static -static-libtool-libs -all-static `$per_deplib && echo 1 2 3 12 13 23 31 123 123a`
+  func_restore_path
+
+  # For each library:
+  # - remove the library images to catch failure to link statically/dynamically,
+  # - add false other deplibs in the paths to catch (some) wrongly added run paths.
+
+  # if -all-static does not work, do not exercise it any more.
+  all_static=-all-static
+  test -z "$link_static_flag" && all_static=
+
+  echo "### test whether installed libtool library liba2 was linked statically"
+  func_move_libs a2 $prefix2 $prefix3 $prefix1
+  func_test_exec -static -static-libtool-libs $all_static `$per_deplib && echo 2 12 23 123 123a`
+  $per_deplib && func_test_exec_fail 1 3 13 31
+  func_restore_libs a2 $prefix2
+
+  echo "### test whether uninstalled libtool library liba1 was linked statically"
+  func_move_libs a1 $prefix1 $prefix2 $prefix3
+  func_test_exec -static-libtool-libs $all_static `$per_deplib && echo 1 12 13 31 123 123a`
+  $per_deplib && func_test_exec_fail -static 2 3 23
+  func_restore_libs a1 $prefix1
+
+  echo "### test whether non-libtool library liba3 was linked statically"
+  func_move_libs a3 $prefix3 $prefix1 $prefix2
+  func_test_exec $all_static `$per_deplib && echo 3 13 23 31 123 123a`
+  func_test_exec_fail -static -static-libtool-libs `$per_deplib && echo 1 2 12`
+  func_restore_libs a3 $prefix3
+
+  cd ..
+done
+
+AT_CLEANUP
+
+
+AT_SETUP([ccache -all-static])
+
+AT_DATA([ccache],
+[[#! /bin/sh
+# poor man's ccache clone
+case $1 in
+-*) echo "bogus argument: $1" >&2; exit 1 ;;
+esac
+exec "$@"
+]])
+chmod +x ./ccache
+
+AT_DATA([a.c],
+[[int main(void) { return 0; }
+]])
+
+AT_CHECK([$CC $CPPFLAGS $CFLAGS -c a.c], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link --tag=CC ./ccache $CC $CFLAGS $LDFLAGS -all-static a.$OBJEXT -o a$EXEEXT],
+	 [], [ignore], [ignore])
+
+AT_CLEANUP
diff --git a/tests/stresstest.at b/tests/stresstest.at
new file mode 100644
index 0000000..e71d492
--- /dev/null
+++ b/tests/stresstest.at
@@ -0,0 +1,290 @@
+# stresstest.at -- Libtool stress test                       -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Ralf Wildenhues, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Test various flag and option combinations.
+# Test linkage against objects in various sections.
+
+# Note: This test is experimental, and might be too strict for some systems.
+
+AT_BANNER([Libtool stress test.])
+AT_SETUP([Link option thorough search test])
+AT_KEYWORDS([libtool])
+eval `$LIBTOOL --config | $EGREP '^(CC|objdir|allow_undefined_flag)='`
+
+mkdir sub sub2 sub3 2>/dev/null
+
+AT_DATA(a.c,
+[[/* all kinds of data items */
+#ifdef __cplusplus
+extern "C" {
+#endif
+int v1;
+static int v2;
+int v3 = 0;
+int v4 = 1;
+extern const int v5, v6;
+extern const char *v7;
+extern const char v8[];
+extern int (*const v12) (void);
+const int v5 = 0;
+const int v6 = 1;
+const char* v7 = "\01foo";
+const char v8[] = "\01bar";
+int v9(void) { return v2 + 1; }
+int (*v10) (void);
+int (*v11) (void) = v9;
+int (*const v12) (void) = v9;
+
+typedef struct { int arr[1000]; } large;
+large v13;
+large v14 = { { 0 } };
+large v15 = { { 1 } };
+#ifdef __cplusplus
+}
+#endif
+]])
+
+AT_DATA(asyms,
+[[v1
+v3
+v4
+v5
+v6
+v7
+v8
+v9
+v10
+v11
+v12
+v13
+v14
+v15
+]])
+
+AT_DATA(b.c,
+[[int b = 42;
+int b3 = 1;
+int ab = 1;
+]])
+
+AT_DATA(main.c,
+[[
+#if defined(LIBA_DLL_IMPORT)
+#  if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__)
+#    define LIBA_SCOPE extern __declspec(dllimport)
+#    if defined(_MSC_VER)
+#      define LIBA_SCOPE_VAR LIBA_SCOPE
+#    endif
+#  endif
+#endif
+#if !defined(LIBA_SCOPE)
+#  define LIBA_SCOPE extern
+#endif
+#if !defined(LIBA_SCOPE_VAR)
+#  define LIBA_SCOPE_VAR extern
+#endif
+#ifdef __cplusplus
+extern "C" {
+#endif
+LIBA_SCOPE_VAR int v1;
+LIBA_SCOPE_VAR int v3, v4;
+LIBA_SCOPE const int v5, v6;
+LIBA_SCOPE_VAR const char* v7;
+LIBA_SCOPE_VAR const char v8[];
+extern int v9(void);
+LIBA_SCOPE_VAR int (*v10) (void);
+LIBA_SCOPE_VAR int (*v11) (void);
+LIBA_SCOPE int (*const v12) (void);
+#ifdef __cplusplus
+}
+#endif
+
+typedef struct { int arr[1000]; } large;
+LIBA_SCOPE_VAR large v13, v14, v15;
+
+int main(void)
+{
+  char s = v7[0] + v8[0];
+  return s + v1 + v3 + v4 + v5 + v6 + v9() + v11() + v12()
+	   + v13.arr[0] + v14.arr[0] + v15.arr[0]
+           - 8;
+}
+]])
+
+AT_DATA(dlself.c,
+[[
+#if defined(LIBA_DLL_IMPORT)
+#  if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__)
+#    define LIBA_SCOPE extern __declspec(dllimport)
+#    if defined(_MSC_VER)
+#      define LIBA_SCOPE_VAR LIBA_SCOPE
+#    endif
+#  endif
+#endif
+#if !defined(LIBA_SCOPE)
+#  define LIBA_SCOPE extern
+#endif
+#if !defined(LIBA_SCOPE_VAR)
+#  define LIBA_SCOPE_VAR extern
+#endif
+#ifdef __cplusplus
+extern "C" {
+#endif
+LIBA_SCOPE_VAR int v1;
+LIBA_SCOPE_VAR int v3, v4;
+LIBA_SCOPE const int v5, v6;
+LIBA_SCOPE_VAR const char* v7;
+LIBA_SCOPE_VAR const char v8[];
+extern int v9(void);
+LIBA_SCOPE_VAR int (*v10) (void);
+LIBA_SCOPE_VAR int (*v11) (void);
+LIBA_SCOPE int (*const v12) (void);
+
+typedef struct { int arr[1000]; } large;
+LIBA_SCOPE_VAR large v13, v14, v15;
+
+extern int w1;
+extern int w3, w4;
+extern const int w5, w6;
+extern const char* w7;
+extern const char w8[];
+extern int w9(void);
+extern int (*w10) (void);
+extern int (*w11) (void);
+extern int (*const w12) (void);
+extern large w13, w14, w15;
+#ifdef __cplusplus
+}
+#endif
+
+int main(void)
+{
+  char s = v7[0] + v8[0] + w7[0] + w8[0];
+  return s + v1 + v3 + v4 + v5 + v6 + v9() + v11() + v12()
+	   + v13.arr[0] + v14.arr[0] + v15.arr[0]
+	   + w1 + w3 + w4 + w5 + w6 + w9() + w11() + w12()
+	   + w13.arr[0] + w14.arr[0] + w15.arr[0]
+           - 16;
+}
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+int w1;
+static int w2;
+int w3 = 0;
+int w4 = 1;
+const int w5 = 0;
+const int w6 = 1;
+const char* w7 = "\01foo";
+const char w8[] = "\01bar";
+int w9(void) { return w2 + 1; }
+int (*w10) (void);
+int (*w11) (void) = w9;
+int (*const w12) (void) = w9;
+large w13;
+large w14 = { { 0 } };
+large w15 = { { 1 } };
+#ifdef __cplusplus
+}
+#endif
+]])
+
+AT_DATA(dlselfsyms,
+[[w1
+w3
+w4
+w5
+w6
+w7
+w8
+w9
+w10
+w11
+w12
+w13
+w14
+w15
+]])
+
+
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c -o sub/a.lo],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c b.c -o sub/b.lo],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS -DLIBA_DLL_IMPORT $CFLAGS -c main.c],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c main.c -o main-static.lo],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS -DLIBA_DLL_IMPORT $CFLAGS -c dlself.c -o sub3/dlself.lo],
+	 [0],[ignore],[ignore])
+AT_CHECK([$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c dlself.c -o sub3/dlself-static.lo],
+	 [0],[ignore],[ignore])
+
+case $allow_undefined_flag in
+  unsupported) undef_opts=-no-undefined ;;
+  *)           undef_opts='"" -no-undefined' ;;
+esac
+
+# expose problems with the regex:
+touch vfoo v.bar
+
+for l1 in $undef_opts
+do
+  for l2 in '' '-export-symbols-regex "v.*"' '-export-symbols asyms'
+  do
+    for l3 in '' '-rpath /nonexistent'
+    do
+      linkargs="$l1 $l2 $l3"
+      for rel in '' ./ `pwd`/
+      do
+	LT_AT_CHECK([eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o "$rel"sub2/liba.la "$rel"sub/a.lo' $linkargs],
+	         [0],[ignore],[ignore])
+	for st in '' '-static' '-no-install'
+	do
+	  # if -static is not passed, and the library is shared, then we have
+	  # to use -DLIBA_DLL_IMPORT, thus main.lo (and not main-static.lo).
+	  case $st,$l3 in
+	  -static,*) mst=-static ;;
+	  *,-rpath*) mst= ;;
+	  *) mst=-static ;;
+	  esac
+
+	  LT_AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o "$rel"main$EXEEXT "$rel"main$mst.lo "$rel"sub2/liba.la],
+	  	   [0],[ignore],[ignore])
+	  LT_AT_EXEC_CHECK([./main],[0])
+	  for l10 in '' '-export-symbols dlselfsyms'
+	  do
+	    LT_AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o "$rel"sub3/dlself$EXEEXT "$rel"sub3/dlself$mst.lo "$rel"sub2/liba.la sub/b.lo -dlopen self $l10],
+	    	     [0],[ignore],[ignore])
+	    LT_AT_EXEC_CHECK([./sub3/dlself],[0])
+	  done
+	done
+      done
+    done
+  done
+done
+
+AT_CLEANUP
diff --git a/tests/subproject.at b/tests/subproject.at
new file mode 100644
index 0000000..0e003a3
--- /dev/null
+++ b/tests/subproject.at
@@ -0,0 +1,122 @@
+# subproject.at -- test subproject Libltdl builds             -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([Subproject Libltdl.])
+
+# _LT_AT_LTDL_SETUP
+# -----------------
+m4_pushdef([_LT_AT_LTDL_SETUP],
+[AT_DATA([configure.ac],
+[[AC_INIT([subproject-demo], ]AT_PACKAGE_VERSION[, ]AT_PACKAGE_BUGREPORT[)
+LT_CONFIG_LTDL_DIR([sub/ltdl])
+AC_CONFIG_AUX_DIR([sub/ltdl/config])
+AC_CONFIG_MACRO_DIR([sub/ltdl/m4])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+LT_WITH_LTDL
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+]])
+
+AT_DATA([Makefile.am],
+[[ACLOCAL_AMFLAGS = -I sub/ltdl/m4
+AUTOMAKE_OPTIONS = 1.9
+SUBDIRS = sub/ltdl
+lib_LTLIBRARIES = foo.la
+foo_la_LDFLAGS = -module -avoid-version -no-undefined
+]])
+
+echo 'int dummy = 0;' > foo.c
+])# _LT_AT_LTDL_SETUP
+
+## ------------------------ ##
+## Softlinked libltdl tree. ##
+## ------------------------ ##
+
+AT_SETUP([compiling softlinked libltdl])
+
+_LT_AT_LTDL_SETUP
+
+LT_AT_BOOTSTRAP([--ltdl], [-I sub/ltdl/m4], [ignore], [--add-missing --copy],
+	[], [], [all $tst_dist])
+
+AT_CHECK([test -f sub/ltdl/libltdlc.la])
+
+AT_CLEANUP
+
+
+## -------------------- ##
+## Copied libltdl tree. ##
+## -------------------- ##
+
+AT_SETUP([compiling copied libltdl])
+
+_LT_AT_LTDL_SETUP
+
+LT_AT_BOOTSTRAP([--copy --ltdl], [-I sub/ltdl/m4], [ignore],
+	[--add-missing --copy], [], [], [all $tst_dist])
+
+AT_CHECK([test -f sub/ltdl/libltdlc.la])
+
+AT_CLEANUP
+
+
+## ------------------------- ##
+## Installable libltdl tree. ##
+## ------------------------- ##
+
+AT_SETUP([installable libltdl])
+
+prefix=`pwd`/_inst
+
+_LT_AT_LTDL_SETUP
+
+LT_AT_BOOTSTRAP([--copy --ltdl], [-I sub/ltdl/m4], [ignore],
+	[--add-missing --copy], [], [--enable-ltdl-install --prefix=$prefix],
+	[all install $tst_dist])
+
+AT_CHECK([test -f $prefix/lib/libltdl.la])
+AT_CHECK([test -f $prefix/include/ltdl.h])
+
+AT_CLEANUP
+
+
+## ----------------------------------------------- ##
+## libltdl is usable without Autoconf or Automake. ##
+## ----------------------------------------------- ##
+
+AT_SETUP([linking libltdl without autotools])
+
+_LTDL_PROJECT_FILES([sub/ltdl])
+LT_AT_LIBTOOLIZE([--copy --ltdl=sub/ltdl])
+LT_AT_MAKE([], [CC="$CC" LIBTOOLFLAGS="$LIBTOOLFLAGS" CPPFLAGS="$CPPFLAGS" ]dnl
+     [CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS" SHELL="$SHELL" MAKE="${MAKE-make}" ]dnl
+     [CONFIGURE_OPTIONS="$configure_options"])
+
+LT_AT_EXEC_CHECK([./ltdldemo], 0, [ignore])
+
+AT_CLEANUP
+
+dnl Be careful not to let the definition leak into other tests
+m4_popdef([_LT_AT_LTDL_SETUP])
diff --git a/tests/suffix.test b/tests/suffix.test
new file mode 100755
index 0000000..b5c2a88
--- /dev/null
+++ b/tests/suffix.test
@@ -0,0 +1,52 @@
+#! /bin/sh
+# suffix.test - check that libtool knows how to transform source suffices.
+#
+#   Copyright (C) 2003, 2004, 2007, 2008  Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+# Extensions taken from the ones that Automake recognizes, plus Objective C,
+# and GNU Ada.  Also test that multiple dots are handled correctly.
+extensions="C F S ada adb ads asm c c++ cc cpp cxx f f90 F90 f95 F95 f03 F03 for go m s sx ada.ada"
+bad_names="foo."
+
+. tests/defs || exit 1
+
+status=$EXIT_SUCCESS
+for ext in $extensions; do
+  # Try a sample compile command.
+  if ($LIBTOOL -n --mode=compile compiler -c foo.$ext 2>&1; exit 0) | grep 'cannot'; then
+    status=$EXIT_FAILURE
+  else
+    echo "recognized foo.$ext as a valid source file"
+  fi
+done
+
+# Make sure that invalid suffixes are not recognized.
+for name in $bad_names; do
+  if ($LIBTOOL -n --mode=compile compiler -c $name 2>&1; exit 0) | grep 'cannot'; then :
+  else
+    echo "incorrectly recognized $name as a valid source file"
+    status=$EXIT_FAILURE
+  fi
+done
+
+exit $status
diff --git a/tests/sysroot.at b/tests/sysroot.at
new file mode 100644
index 0000000..2a27134
--- /dev/null
+++ b/tests/sysroot.at
@@ -0,0 +1,208 @@
+# static.at -- test flags for sysrooting          -*- Autotest -*-
+#
+#   Copyright (C) 2009 Free Software Foundation, Inc.
+#   Written by Paolo Bonzini, 2009
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+m4_define([SYSROOT_TEST], [
+AT_SETUP([$1])
+AT_KEYWORDS([libtool sysroot])
+
+gcc_sysroot=`$CC --print-sysroot 2> /dev/null`
+if test $? != 0; then
+  gcc_sysroot=
+fi
+AT_CHECK([test -n "$gcc_sysroot" || exit 77])
+
+# Detect installation prefix for the compiler
+prefix=
+for i in crt0.o crt1.o crt2.o crti.o; do
+  j=`$CC --print-file-name $i 2> /dev/null`
+  test $? = 0 || continue
+  case "$j" in
+    $gcc_sysroot*/lib/$i)
+      prefix=`echo "$j" | sed "s,^$gcc_sysroot\\(.*\\)/lib/$i\$,\\1,"`
+      break ;;
+  esac
+done
+AT_CHECK([test -n "$prefix" || exit 77])
+
+sysroot=`pwd`/sys-root
+
+# difficult to use AS_DIRNAME inside the AT_CHECK macro, so
+# encapsulate as a shell function.
+local_dirname() {
+  AS_DIRNAME(["$[]1"])
+}
+
+AT_CHECK([
+(cd "$gcc_sysroot" && find ".$prefix/bin" ".$prefix/include" ".$prefix/lib" \! -type d) | \
+while read file; do
+  dir=`local_dirname "$sysroot/$file"`
+  test -d "$dir" || mkdir -p "$dir"
+  rm -f "$sysroot/$file"
+  ln -s "$gcc_sysroot/$file" "$sysroot/$file" || \
+    cp "$gcc_sysroot/$file" "$sysroot/$file"
+done])
+
+LDFLAGS="$LDFLAGS --sysroot=$sysroot -no-undefined"
+configure_options="$configure_options --with-sysroot=$sysroot --prefix=$prefix"
+
+#???
+if test "$shlibpath_var" = PATH; then
+  configure_options="$configure_options --libdir=/$prefix/bin"
+fi
+
+AT_CHECK([mkdir lib1 lib2 prog])
+
+# Build and install package 1.
+AT_DATA([lib1/configure.ac],
+[[AC_INIT([lib1], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([lib1.c])
+LT_INIT
+AC_OUTPUT(Makefile)
+]])
+
+AT_DATA([lib1/Makefile.am],
+[[lib_LTLIBRARIES = lib1.la
+lib1_la_SOURCES = lib1.c
+lib1_la_LDFLAGS = -rpath $(libdir)
+]])
+
+AT_DATA([lib1/lib1.c],
+[[#include <string.h>
+#include <stdlib.h>
+char *f(const char *s)
+{
+  return strdup (s);
+}
+]])
+
+cd lib1
+LT_AT_BOOTSTRAP([], [-I $abs_top_srcdir/libltdl/m4], [ignore],
+	        [--add-missing], [], [], [all])
+
+AT_CHECK([$MAKE install DESTDIR=$sysroot], [0], [ignore], [ignore])
+AT_CHECK([test -f "$sysroot/$prefix/lib/lib1.la"])
+AT_CHECK([grep -F "$sysroot" "$sysroot/$prefix/lib/lib1.la"], [1])
+cd ..
+
+# Build and install package 2.
+AT_DATA([lib2/configure.ac],
+[[AC_INIT([lib2], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([lib2.c])
+LT_INIT
+sysroot=$with_sysroot
+AC_SUBST([sysroot])
+AC_OUTPUT(Makefile)
+]])
+
+AT_DATA([lib2/Makefile.am],
+[[lib_LTLIBRARIES = lib2.la
+lib2_la_SOURCES = lib2.c
+lib2_la_LDFLAGS = -rpath $(libdir)
+lib2_la_LIBADD = $2]1[$3
+]])
+
+AT_DATA([lib2/lib2.c],
+[[#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+extern char *f(const char *s);
+char *g(const char *s)
+{
+  char *q = f(s);
+  puts (q);
+  return q;
+}
+]])
+
+cd lib2
+LT_AT_BOOTSTRAP([], [-I $abs_top_srcdir/libltdl/m4], [ignore],
+	        [--add-missing], [], [], [all])
+
+AT_CHECK([$MAKE install DESTDIR=$sysroot], [0], [ignore], [ignore])
+AT_CHECK([test -f $sysroot/$prefix/lib/lib2.la])
+AT_CHECK([grep -F "$sysroot" "$sysroot/$prefix/lib/lib2.la"], [1])
+cd ..
+
+# Build and install a program.
+AT_DATA([prog/configure.ac],
+[[AC_INIT([prog], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([prog.c])
+LT_INIT
+sysroot=$with_sysroot
+AC_SUBST([sysroot])
+AC_OUTPUT(Makefile)
+]])
+
+AT_DATA([prog/Makefile.am],
+[[bin_PROGRAMS = prog
+prog_SOURCES = prog.c
+prog_LDADD = $2]2[$3
+]])
+
+AT_DATA([prog/prog.c],
+[[#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+extern char *g(const char *s);
+int main()
+{
+  char *q = g("hello world");
+  free (q);
+  return 0;
+}
+]])
+
+cd prog
+LT_AT_BOOTSTRAP([], [-I $abs_top_srcdir/libltdl/m4], [ignore],
+	        [--add-missing], [], [], [all])
+
+AT_CHECK([$MAKE install DESTDIR=$sysroot], [0], [ignore], [ignore])
+AT_CHECK([test -f $sysroot/$prefix/bin/prog$EXEEXT])
+AT_CHECK([grep -F "$sysroot" "$sysroot/$prefix/bin/prog$EXEEXT"], [1])
+AT_CHECK([grep "'.*=" $sysroot/$prefix/lib/lib2.la], [0], [ignore])
+AT_CHECK([./libtool --mode=finish $sysroot/$prefix/lib/lib@<:@12@:>@.la], [0], [ignore])
+AT_CHECK([grep "'.*=" $sysroot/$prefix/lib/lib@<:@12@:>@.la], [1])
+
+# missing tests
+# 1) pass absolute .la files
+# 2) pass absolute -L
+# 2) pass relative .la files
+
+cd ..
+AT_CLEANUP
+])
+
+AT_BANNER([sysroot tests])
+SYSROOT_TEST([-L=.../lib -l],	      [-L=$(libdir) -l], [])
+SYSROOT_TEST([-L SYSROOT/.../lib -l], [-L$(sysroot)$(libdir) -l], [])
+SYSROOT_TEST([SYSROOT/.../*.la],      [$(sysroot)$(libdir)/lib], [.la])
+
+dnl This one does not make sense.
+dnl SYSROOT_TEST([=.../*.la],	      [=$(libdir)/lib], [.la])
diff --git a/tests/tagdemo-conf.test b/tests/tagdemo-conf.test
new file mode 100755
index 0000000..96dfc3a
--- /dev/null
+++ b/tests/tagdemo-conf.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# tagdemo-conf.test - try configuring the tagdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/tagdemo"
+func_make_distclean
+func_configure
+func_check_static_shared "yes" "yes"
+
+exit 0
diff --git a/tests/tagdemo-exec.test b/tests/tagdemo-exec.test
new file mode 100755
index 0000000..6f90109
--- /dev/null
+++ b/tests/tagdemo-exec.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# tagdemo-exec.test - check that programs in the tagdemo subdirectory are viable
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "tagdemo-make" "tests/tagdemo/tagdemo$EXEEXT"
+
+func_rmprefixdir
+func_exec_init "uninstalled"
+func_exec "tests/tagdemo/tagdemo$EXEEXT"
+
+exit $exec_status
diff --git a/tests/tagdemo-make.test b/tests/tagdemo-make.test
new file mode 100755
index 0000000..235dc7f
--- /dev/null
+++ b/tests/tagdemo-make.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# tagdemo-make.test - try building in the tagdemo subdirectory
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_require "tagdemo-conf" "tests/tagdemo/Makefile"
+
+func_rmprefixdir
+func_cd "tests/tagdemo"
+func_make
+
+exit 0
diff --git a/tests/tagdemo-shared-exec.test b/tests/tagdemo-shared-exec.test
new file mode 100755
index 0000000..ecf553a
--- /dev/null
+++ b/tests/tagdemo-shared-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/tagdemo-exec.test
diff --git a/tests/tagdemo-shared-make.test b/tests/tagdemo-shared-make.test
new file mode 100755
index 0000000..9ffbd49
--- /dev/null
+++ b/tests/tagdemo-shared-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/tagdemo-make.test
diff --git a/tests/tagdemo-shared.test b/tests/tagdemo-shared.test
new file mode 100755
index 0000000..6fe671f
--- /dev/null
+++ b/tests/tagdemo-shared.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# tagdemo-shared.test - try configuring the tagdemo subdirectory for shared libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/tagdemo"
+func_make_distclean
+func_configure "--disable-static"
+func_check_static_shared "no" "yes"
+
+exit 0
diff --git a/tests/tagdemo-static-exec.test b/tests/tagdemo-static-exec.test
new file mode 100755
index 0000000..ecf553a
--- /dev/null
+++ b/tests/tagdemo-static-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/tagdemo-exec.test
diff --git a/tests/tagdemo-static-make.test b/tests/tagdemo-static-make.test
new file mode 100755
index 0000000..9ffbd49
--- /dev/null
+++ b/tests/tagdemo-static-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/tagdemo-make.test
diff --git a/tests/tagdemo-static.test b/tests/tagdemo-static.test
new file mode 100755
index 0000000..6c5785f
--- /dev/null
+++ b/tests/tagdemo-static.test
@@ -0,0 +1,34 @@
+#! /bin/sh
+# tagdemo-static.test - try configuring tagdemo subdirectory for static libs
+#
+#   Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+func_mkprefixdir
+func_cd "tests/tagdemo"
+func_make_distclean
+func_configure "--disable-shared"
+func_check_static_shared "yes" "no"
+
+exit 0
diff --git a/tests/tagdemo-undef-exec.test b/tests/tagdemo-undef-exec.test
new file mode 100755
index 0000000..ecf553a
--- /dev/null
+++ b/tests/tagdemo-undef-exec.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/tagdemo-exec.test
diff --git a/tests/tagdemo-undef-make.test b/tests/tagdemo-undef-make.test
new file mode 100755
index 0000000..9ffbd49
--- /dev/null
+++ b/tests/tagdemo-undef-make.test
@@ -0,0 +1,3 @@
+#! /bin/sh
+. tests/defs || exit 1
+. $srcdir/tests/tagdemo-make.test
diff --git a/tests/tagdemo-undef.test b/tests/tagdemo-undef.test
new file mode 100755
index 0000000..e1f966d
--- /dev/null
+++ b/tests/tagdemo-undef.test
@@ -0,0 +1,50 @@
+#! /bin/sh
+# tagdemo-undef - test generating shared libraries with undefined symbols
+#
+#   Copyright (C) 2003, 2004, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2003
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+
+func_mkprefixdir
+func_cd "tests/tagdemo"
+func_make_distclean
+func_configure "--disable-static"
+
+grep '^allow_undefined_flag=.\{0,1\}unsupported.\{0,1\}$' ./libtool >/dev/null 2>&1 \
+    && func_skip "$host doesn't support undefined symbols in shared libs"
+
+if test -f ./libtool; then
+  $SED 's,allow_undefined=no,allow_undefined=yes,g' ./libtool > ltnew
+else
+  exit 1
+fi
+
+if test -f ./ltnew; then
+  rm -f libtool
+  mv ltnew libtool
+else
+  exit 1
+fi
+
+exit 0
diff --git a/tests/tagdemo/Makefile.am b/tests/tagdemo/Makefile.am
new file mode 100644
index 0000000..295e7b6
--- /dev/null
+++ b/tests/tagdemo/Makefile.am
@@ -0,0 +1,63 @@
+## Makefile.am -- Process this file with automake to produce Makefile.in
+##
+##   Copyright (C) 2003, 2004, 2005, 2011 Free Software Foundation
+##   Written by Gary V. Vaughan, 2003
+##
+##   This file is part of GNU Libtool.
+##
+## GNU Libtool is free software; you can redistribute it and/or
+## modify it under the terms of the GNU General Public License as
+## published by the Free Software Foundation; either version 2 of
+## the License, or (at your option) any later version.
+##
+## GNU Libtool is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with GNU Libtool; see the file COPYING.  If not, a copy
+## can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+## or obtained by writing to the Free Software Foundation, Inc.,
+## 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#####
+
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS  = -I ../../libltdl/m4
+AM_CPPFLAGS	 = -I$(top_srcdir)/../..
+
+noinst_LTLIBRARIES = libconv.la
+lib_LTLIBRARIES = libfoo.la libbaz.la
+
+libfoo_la_SOURCES = foo.cpp
+libfoo_la_LDFLAGS = -no-undefined
+libfoo_la_LIBADD = libconv.la $(LIBM)
+
+# Test some of the ILD support when using tagged configurations.
+libbaz_la_SOURCES = baz.cpp
+libbaz_la_LDFLAGS = -no-undefined
+libbaz_la_LIBADD = libfoo.la
+
+# Test convenience libraries.
+libconv_la_SOURCES = conv.cpp
+libconv_la_LDFLAGS = -no-undefined
+
+noinst_HEADERS = foo.h baz.h conv.h
+
+bin_PROGRAMS = tagdemo
+
+tagdemo_SOURCES = main.cpp
+tagdemo_LDADD = libbaz.la libfoo.la
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
diff --git a/tests/tagdemo/Makefile.in b/tests/tagdemo/Makefile.in
new file mode 100644
index 0000000..68e1df8
--- /dev/null
+++ b/tests/tagdemo/Makefile.in
@@ -0,0 +1,786 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#####
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+target_triplet = @target@
+bin_PROGRAMS = tagdemo$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(noinst_HEADERS) \
+	$(srcdir)/../../libltdl/config/config.guess \
+	$(srcdir)/../../libltdl/config/config.sub \
+	$(srcdir)/../../libltdl/config/install-sh \
+	$(srcdir)/../../libltdl/config/ltmain.sh \
+	$(srcdir)/../../libltdl/config/missing $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(top_srcdir)/configure \
+	../../libltdl/config/compile ../../libltdl/config/config.guess \
+	../../libltdl/config/config.sub ../../libltdl/config/depcomp \
+	../../libltdl/config/install-sh ../../libltdl/config/ltmain.sh \
+	../../libltdl/config/mdate-sh ../../libltdl/config/missing \
+	../../libltdl/config/texinfo.tex
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../../libltdl/m4/libtool.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltoptions.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltsugar.m4 \
+	$(top_srcdir)/../../libltdl/m4/ltversion.m4 \
+	$(top_srcdir)/../../libltdl/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"
+LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
+libbaz_la_DEPENDENCIES = libfoo.la
+am_libbaz_la_OBJECTS = baz.lo
+libbaz_la_OBJECTS = $(am_libbaz_la_OBJECTS)
+libbaz_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(libbaz_la_LDFLAGS) $(LDFLAGS) -o $@
+libconv_la_LIBADD =
+am_libconv_la_OBJECTS = conv.lo
+libconv_la_OBJECTS = $(am_libconv_la_OBJECTS)
+libconv_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(libconv_la_LDFLAGS) $(LDFLAGS) -o $@
+am__DEPENDENCIES_1 =
+libfoo_la_DEPENDENCIES = libconv.la $(am__DEPENDENCIES_1)
+am_libfoo_la_OBJECTS = foo.lo
+libfoo_la_OBJECTS = $(am_libfoo_la_OBJECTS)
+libfoo_la_LINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CXXLD) $(AM_CXXFLAGS) \
+	$(CXXFLAGS) $(libfoo_la_LDFLAGS) $(LDFLAGS) -o $@
+PROGRAMS = $(bin_PROGRAMS)
+am_tagdemo_OBJECTS = main.$(OBJEXT)
+tagdemo_OBJECTS = $(am_tagdemo_OBJECTS)
+tagdemo_DEPENDENCIES = libbaz.la libfoo.la
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp =
+am__depfiles_maybe =
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libbaz_la_SOURCES) $(libconv_la_SOURCES) \
+	$(libfoo_la_SOURCES) $(tagdemo_SOURCES)
+DIST_SOURCES = $(libbaz_la_SOURCES) $(libconv_la_SOURCES) \
+	$(libfoo_la_SOURCES) $(tagdemo_SOURCES)
+HEADERS = $(noinst_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBM = @LIBM@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target = @target@
+target_alias = @target_alias@
+target_cpu = @target_cpu@
+target_os = @target_os@
+target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = no-dependencies foreign
+ACLOCAL_AMFLAGS = -I ../../libltdl/m4
+AM_CPPFLAGS = -I$(top_srcdir)/../..
+noinst_LTLIBRARIES = libconv.la
+lib_LTLIBRARIES = libfoo.la libbaz.la
+libfoo_la_SOURCES = foo.cpp
+libfoo_la_LDFLAGS = -no-undefined
+libfoo_la_LIBADD = libconv.la $(LIBM)
+
+# Test some of the ILD support when using tagged configurations.
+libbaz_la_SOURCES = baz.cpp
+libbaz_la_LDFLAGS = -no-undefined
+libbaz_la_LIBADD = libfoo.la
+
+# Test convenience libraries.
+libconv_la_SOURCES = conv.cpp
+libconv_la_LDFLAGS = -no-undefined
+noinst_HEADERS = foo.h baz.h conv.h
+tagdemo_SOURCES = main.cpp
+tagdemo_LDADD = libbaz.la libfoo.la
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .cpp .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+
+clean-noinstLTLIBRARIES:
+	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
+	@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libbaz.la: $(libbaz_la_OBJECTS) $(libbaz_la_DEPENDENCIES) 
+	$(libbaz_la_LINK) -rpath $(libdir) $(libbaz_la_OBJECTS) $(libbaz_la_LIBADD) $(LIBS)
+libconv.la: $(libconv_la_OBJECTS) $(libconv_la_DEPENDENCIES) 
+	$(libconv_la_LINK)  $(libconv_la_OBJECTS) $(libconv_la_LIBADD) $(LIBS)
+libfoo.la: $(libfoo_la_OBJECTS) $(libfoo_la_DEPENDENCIES) 
+	$(libfoo_la_LINK) -rpath $(libdir) $(libfoo_la_OBJECTS) $(libfoo_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+tagdemo$(EXEEXT): $(tagdemo_OBJECTS) $(tagdemo_DEPENDENCIES) 
+	@rm -f tagdemo$(EXEEXT)
+	$(CXXLINK) $(tagdemo_OBJECTS) $(tagdemo_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+.cpp.o:
+	$(CXXCOMPILE) -c -o $@ $<
+
+.cpp.obj:
+	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.cpp.lo:
+	$(LTCXXCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS)
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool clean-noinstLTLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-local distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-libLTLIBRARIES
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool clean-noinstLTLIBRARIES ctags dist dist-all \
+	dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \
+	dist-zip distcheck distclean distclean-compile \
+	distclean-generic distclean-libtool distclean-local \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binPROGRAMS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-binPROGRAMS \
+	uninstall-libLTLIBRARIES
+
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+
+# Workaround a bug in Autoconf-2.61 and earlier that don't clean up
+# file droppings left by many compilers:
+distclean-local:
+	ac_files="a.out.* a.exe.* a_out.exe.* b.out.* conftest.*"; \
+	for ac_file in $$ac_files; do \
+	  case $$ac_file in \
+	    *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) rm -rf $$ac_file ;; \
+	  esac; \
+	done
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/tests/tagdemo/README b/tests/tagdemo/README
new file mode 100644
index 0000000..33690e3
--- /dev/null
+++ b/tests/tagdemo/README
@@ -0,0 +1,8 @@
+# $Id$
+
+This directory contains a sample package that demonstrates the use of
+GNU Libtool's multi-language support through the use of configuration
+tags.  It requires GNU autoconf, automake and of course libtool.
+
+The demonstration generates a library from C++ sources, which is then
+linked to a C++ program.
diff --git a/tests/tagdemo/aclocal.m4 b/tests/tagdemo/aclocal.m4
new file mode 100644
index 0000000..d479ce3
--- /dev/null
+++ b/tests/tagdemo/aclocal.m4
@@ -0,0 +1,956 @@
+# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
+[m4_warning([this file was generated for autoconf 2.68.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version.  Point them to the right macro.
+m4_if([$1], [1.11.1], [],
+      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too.  Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL                                            -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+  $1_TRUE=
+  $1_FALSE='#'
+else
+  $1_TRUE='#'
+  $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+  AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
+       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+                   [depcc="$$1"   am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+               [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_$1_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+  fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_$1_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking.              -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake.                             -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much.  Some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes.	            -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+  [[\\/$]]* | ?:[[\\/]]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling.                     -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane.    -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$[*]" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$[*]" != "X $srcdir/configure conftest.file" \
+      && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+   fi
+
+   test "$[2]" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+  AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball.                            -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+     [m4_case([$1], [ustar],, [pax],,
+              [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+  case $_am_tool in
+  gnutar)
+    for _am_tar in tar gnutar gtar;
+    do
+      AM_RUN_LOG([$_am_tar --version]) && break
+    done
+    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+    am__untar="$_am_tar -xf -"
+    ;;
+  plaintar)
+    # Must skip GNU tar: if it does not support --format= it doesn't create
+    # ustar tarball either.
+    (tar --version) >/dev/null 2>&1 && continue
+    am__tar='tar chf - "$$tardir"'
+    am__tar_='tar chf - "$tardir"'
+    am__untar='tar xf -'
+    ;;
+  pax)
+    am__tar='pax -L -x $1 -w "$$tardir"'
+    am__tar_='pax -L -x $1 -w "$tardir"'
+    am__untar='pax -r'
+    ;;
+  cpio)
+    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+    am__untar='cpio -i -H $1 -d'
+    ;;
+  none)
+    am__tar=false
+    am__tar_=false
+    am__untar=false
+    ;;
+  esac
+
+  # If the value was cached, stop now.  We just wanted to have am__tar
+  # and am__untar set.
+  test -n "${am_cv_prog_tar_$1}" && break
+
+  # tar/untar a dummy directory, and stop if the command works
+  rm -rf conftest.dir
+  mkdir conftest.dir
+  echo GrepMe > conftest.dir/file
+  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+  rm -rf conftest.dir
+  if test -s conftest.tar; then
+    AM_RUN_LOG([$am__untar <conftest.tar])
+    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+  fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../../libltdl/m4/libtool.m4])
+m4_include([../../libltdl/m4/ltoptions.m4])
+m4_include([../../libltdl/m4/ltsugar.m4])
+m4_include([../../libltdl/m4/ltversion.m4])
+m4_include([../../libltdl/m4/lt~obsolete.m4])
diff --git a/tests/tagdemo/baz.cpp b/tests/tagdemo/baz.cpp
new file mode 100644
index 0000000..2e47e3e
--- /dev/null
+++ b/tests/tagdemo/baz.cpp
@@ -0,0 +1,38 @@
+// -*- C++ -*-
+//    baz.cpp -- a slightly more complicated test library
+//
+//    Copyright (C) 1998-2000 Free Software Foundation, Inc.
+//    Written by Thomas Tanner, 1998
+//
+//    This file is part of GNU Libtool.
+//
+// GNU Libtool is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License as
+// published by the Free Software Foundation; either version 2 of
+// the License, or (at your option) any later version.
+//
+// GNU Libtool is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with GNU Libtool; see the file COPYING.  If not, a copy
+// can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+// or obtained by writing to the Free Software Foundation, Inc.,
+// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+#include "foo.h"
+#include "baz.h"
+
+// --------------------------------------------------------------------
+// Our C++ derived class methods.
+
+
+int
+barbaz_derived::baz(void)
+{
+  foobar_derived FB;
+
+  return FB.foo();
+}
diff --git a/tests/tagdemo/baz.h b/tests/tagdemo/baz.h
new file mode 100644
index 0000000..2737a2c
--- /dev/null
+++ b/tests/tagdemo/baz.h
@@ -0,0 +1,46 @@
+// -*- C++ -*-
+//    baz.h -- interface to the libfoo* libraries
+//
+//    Copyright (C) 1998-1999 Free Software Foundation, Inc.
+//    Written by Thomas Tanner, 1998
+//
+//    This file is part of GNU Libtool.
+//
+// GNU Libtool is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License as
+// published by the Free Software Foundation; either version 2 of
+// the License, or (at your option) any later version.
+//
+// GNU Libtool is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with GNU Libtool; see the file COPYING.  If not, a copy
+// can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+// or obtained by writing to the Free Software Foundation, Inc.,
+// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+// Only include this header file once.
+#ifndef _BAZ_H_
+#define _BAZ_H_ 1
+
+// Our test C++ base class.
+class barbaz
+{
+public:
+  virtual int baz(void) = 0;
+  // Some dummy pure virtual functions.
+};
+
+
+// Our test C++ derived class.
+class barbaz_derived : public barbaz
+{
+public:
+  virtual int baz(void);
+  // Override the base class' pure virtual functions.
+};
+
+#endif /* !_FOO_H_ */
diff --git a/tests/tagdemo/configure b/tests/tagdemo/configure
new file mode 100755
index 0000000..c77f572
--- /dev/null
+++ b/tests/tagdemo/configure
@@ -0,0 +1,17882 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.68 for tagdemo 1.0.
+#
+# Report bugs to <bug-libtool@gnu.org>.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+
+  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+    PATH=/empty FPATH=/empty; export PATH FPATH
+    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-libtool@gnu.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='tagdemo'
+PACKAGE_TARNAME='tagdemo'
+PACKAGE_VERSION='1.0'
+PACKAGE_STRING='tagdemo 1.0'
+PACKAGE_BUGREPORT='bug-libtool@gnu.org'
+PACKAGE_URL=''
+
+ac_unique_file="foo.cpp"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+#  include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+#  include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+LIBOBJS
+LIBM
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+DLLTOOL
+OBJDUMP
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+EGREP
+GREP
+SED
+LIBTOOL
+CXXCPP
+am__fastdepCXX_FALSE
+am__fastdepCXX_TRUE
+CXXDEPMODE
+ac_ct_CXX
+CXXFLAGS
+CXX
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_dependency_tracking
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_gnu_ld
+with_sysroot
+enable_libtool_lock
+'
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+CXX
+CXXFLAGS
+CCC
+CXXCPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$ac_prev"; then
+    eval $ac_prev=\$ac_option
+    ac_prev=
+    continue
+  fi
+
+  case $ac_option in
+  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *=)   ac_optarg= ;;
+  *)    ac_optarg=yes ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
+
+  -bindir | --bindir | --bindi | --bind | --bin | --bi)
+    ac_prev=bindir ;;
+  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+    bindir=$ac_optarg ;;
+
+  -build | --build | --buil | --bui | --bu)
+    ac_prev=build_alias ;;
+  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+    build_alias=$ac_optarg ;;
+
+  -cache-file | --cache-file | --cache-fil | --cache-fi \
+  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+    ac_prev=cache_file ;;
+  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+    cache_file=$ac_optarg ;;
+
+  --config-cache | -C)
+    cache_file=config.cache ;;
+
+  -datadir | --datadir | --datadi | --datad)
+    ac_prev=datadir ;;
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
+    datadir=$ac_optarg ;;
+
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
+  -disable-* | --disable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
+
+  -enable-* | --enable-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid feature name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"enable_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval enable_$ac_useropt=\$ac_optarg ;;
+
+  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+  | --exec | --exe | --ex)
+    ac_prev=exec_prefix ;;
+  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+  | --exec=* | --exe=* | --ex=*)
+    exec_prefix=$ac_optarg ;;
+
+  -gas | --gas | --ga | --g)
+    # Obsolete; use --with-gas.
+    with_gas=yes ;;
+
+  -help | --help | --hel | --he | -h)
+    ac_init_help=long ;;
+  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+    ac_init_help=recursive ;;
+  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+    ac_init_help=short ;;
+
+  -host | --host | --hos | --ho)
+    ac_prev=host_alias ;;
+  -host=* | --host=* | --hos=* | --ho=*)
+    host_alias=$ac_optarg ;;
+
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
+  -includedir | --includedir | --includedi | --included | --include \
+  | --includ | --inclu | --incl | --inc)
+    ac_prev=includedir ;;
+  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+  | --includ=* | --inclu=* | --incl=* | --inc=*)
+    includedir=$ac_optarg ;;
+
+  -infodir | --infodir | --infodi | --infod | --info | --inf)
+    ac_prev=infodir ;;
+  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+    infodir=$ac_optarg ;;
+
+  -libdir | --libdir | --libdi | --libd)
+    ac_prev=libdir ;;
+  -libdir=* | --libdir=* | --libdi=* | --libd=*)
+    libdir=$ac_optarg ;;
+
+  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+  | --libexe | --libex | --libe)
+    ac_prev=libexecdir ;;
+  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+  | --libexe=* | --libex=* | --libe=*)
+    libexecdir=$ac_optarg ;;
+
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
+  -localstatedir | --localstatedir | --localstatedi | --localstated \
+  | --localstate | --localstat | --localsta | --localst | --locals)
+    ac_prev=localstatedir ;;
+  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+    localstatedir=$ac_optarg ;;
+
+  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+    ac_prev=mandir ;;
+  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+    mandir=$ac_optarg ;;
+
+  -nfp | --nfp | --nf)
+    # Obsolete; use --without-fp.
+    with_fp=no ;;
+
+  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+  | --no-cr | --no-c | -n)
+    no_create=yes ;;
+
+  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+    no_recursion=yes ;;
+
+  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+  | --oldin | --oldi | --old | --ol | --o)
+    ac_prev=oldincludedir ;;
+  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+    oldincludedir=$ac_optarg ;;
+
+  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+    ac_prev=prefix ;;
+  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+    prefix=$ac_optarg ;;
+
+  -program-prefix | --program-prefix | --program-prefi | --program-pref \
+  | --program-pre | --program-pr | --program-p)
+    ac_prev=program_prefix ;;
+  -program-prefix=* | --program-prefix=* | --program-prefi=* \
+  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+    program_prefix=$ac_optarg ;;
+
+  -program-suffix | --program-suffix | --program-suffi | --program-suff \
+  | --program-suf | --program-su | --program-s)
+    ac_prev=program_suffix ;;
+  -program-suffix=* | --program-suffix=* | --program-suffi=* \
+  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+    program_suffix=$ac_optarg ;;
+
+  -program-transform-name | --program-transform-name \
+  | --program-transform-nam | --program-transform-na \
+  | --program-transform-n | --program-transform- \
+  | --program-transform | --program-transfor \
+  | --program-transfo | --program-transf \
+  | --program-trans | --program-tran \
+  | --progr-tra | --program-tr | --program-t)
+    ac_prev=program_transform_name ;;
+  -program-transform-name=* | --program-transform-name=* \
+  | --program-transform-nam=* | --program-transform-na=* \
+  | --program-transform-n=* | --program-transform-=* \
+  | --program-transform=* | --program-transfor=* \
+  | --program-transfo=* | --program-transf=* \
+  | --program-trans=* | --program-tran=* \
+  | --progr-tra=* | --program-tr=* | --program-t=*)
+    program_transform_name=$ac_optarg ;;
+
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil)
+    silent=yes ;;
+
+  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+    ac_prev=sbindir ;;
+  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+  | --sbi=* | --sb=*)
+    sbindir=$ac_optarg ;;
+
+  -sharedstatedir | --sharedstatedir | --sharedstatedi \
+  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+  | --sharedst | --shareds | --shared | --share | --shar \
+  | --sha | --sh)
+    ac_prev=sharedstatedir ;;
+  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+  | --sha=* | --sh=*)
+    sharedstatedir=$ac_optarg ;;
+
+  -site | --site | --sit)
+    ac_prev=site ;;
+  -site=* | --site=* | --sit=*)
+    site=$ac_optarg ;;
+
+  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+    ac_prev=srcdir ;;
+  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+    srcdir=$ac_optarg ;;
+
+  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+  | --syscon | --sysco | --sysc | --sys | --sy)
+    ac_prev=sysconfdir ;;
+  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+    sysconfdir=$ac_optarg ;;
+
+  -target | --target | --targe | --targ | --tar | --ta | --t)
+    ac_prev=target_alias ;;
+  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+    target_alias=$ac_optarg ;;
+
+  -v | -verbose | --verbose | --verbos | --verbo | --verb)
+    verbose=yes ;;
+
+  -version | --version | --versio | --versi | --vers | -V)
+    ac_init_version=: ;;
+
+  -with-* | --with-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=\$ac_optarg ;;
+
+  -without-* | --without-*)
+    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+    # Reject names that are not valid shell variable names.
+    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+      as_fn_error $? "invalid package name: $ac_useropt"
+    ac_useropt_orig=$ac_useropt
+    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+    case $ac_user_opts in
+      *"
+"with_$ac_useropt"
+"*) ;;
+      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+	 ac_unrecognized_sep=', ';;
+    esac
+    eval with_$ac_useropt=no ;;
+
+  --x)
+    # Obsolete; use --with-x.
+    with_x=yes ;;
+
+  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+  | --x-incl | --x-inc | --x-in | --x-i)
+    ac_prev=x_includes ;;
+  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+    x_includes=$ac_optarg ;;
+
+  -x-libraries | --x-libraries | --x-librarie | --x-librari \
+  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+    ac_prev=x_libraries ;;
+  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+    x_libraries=$ac_optarg ;;
+
+  -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+    ;;
+
+  *=*)
+    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+    # Reject names that are not valid shell variable names.
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+    esac
+    eval $ac_envvar=\$ac_optarg
+    export $ac_envvar ;;
+
+  *)
+    # FIXME: should be removed in autoconf 3.0.
+    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+    ;;
+
+  esac
+done
+
+if test -n "$ac_prev"; then
+  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+  as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+  case $enable_option_checking in
+    no) ;;
+    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+  esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
+do
+  eval ac_val=\$$ac_var
+  # Remove trailing slashes.
+  case $ac_val in
+    */ )
+      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+      eval $ac_var=\$ac_val;;
+  esac
+  # Be sure to have absolute directory names.
+  case $ac_val in
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+  esac
+  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+  if test "x$build_alias" = x; then
+    cross_compiling=maybe
+    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+    If a cross compiler is detected then cross compile mode will be used" >&2
+  elif test "x$build_alias" != "x$host_alias"; then
+    cross_compiling=yes
+  fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+  ac_srcdir_defaulted=yes
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_myself" : 'X\(//\)[^/]' \| \
+	 X"$as_myself" : 'X\(//\)$' \| \
+	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  srcdir=$ac_confdir
+  if test ! -r "$srcdir/$ac_unique_file"; then
+    srcdir=..
+  fi
+else
+  ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+  # Omit some internal or obsolete options to make the list less imposing.
+  # This message is too long to be a string in the A/UX 3.1 sh.
+  cat <<_ACEOF
+\`configure' configures tagdemo 1.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE.  See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+  -h, --help              display this help and exit
+      --help=short        display options specific to this package
+      --help=recursive    display the short help of all the included packages
+  -V, --version           display version information and exit
+  -q, --quiet, --silent   do not print \`checking ...' messages
+      --cache-file=FILE   cache test results in FILE [disabled]
+  -C, --config-cache      alias for \`--cache-file=config.cache'
+  -n, --no-create         do not create output files
+      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+  --prefix=PREFIX         install architecture-independent files in PREFIX
+                          [$ac_default_prefix]
+  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
+                          [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+  --bindir=DIR            user executables [EPREFIX/bin]
+  --sbindir=DIR           system admin executables [EPREFIX/sbin]
+  --libexecdir=DIR        program executables [EPREFIX/libexec]
+  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
+  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
+  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --libdir=DIR            object code libraries [EPREFIX/lib]
+  --includedir=DIR        C header files [PREFIX/include]
+  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
+  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR           info documentation [DATAROOTDIR/info]
+  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR            man documentation [DATAROOTDIR/man]
+  --docdir=DIR            documentation root [DATAROOTDIR/doc/tagdemo]
+  --htmldir=DIR           html documentation [DOCDIR]
+  --dvidir=DIR            dvi documentation [DOCDIR]
+  --pdfdir=DIR            pdf documentation [DOCDIR]
+  --psdir=DIR             ps documentation [DOCDIR]
+_ACEOF
+
+  cat <<\_ACEOF
+
+Program names:
+  --program-prefix=PREFIX            prepend PREFIX to installed program names
+  --program-suffix=SUFFIX            append SUFFIX to installed program names
+  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
+
+System types:
+  --build=BUILD     configure for building on BUILD [guessed]
+  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
+  --target=TARGET   configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+  case $ac_init_help in
+     short | recursive ) echo "Configuration of tagdemo 1.0:";;
+   esac
+  cat <<\_ACEOF
+
+Optional Features:
+  --disable-option-checking  ignore unrecognized --enable/--with options
+  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
+  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
+  --disable-dependency-tracking  speeds up one-time build
+  --enable-dependency-tracking   do not reject slow dependency extractors
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=yes]
+  --enable-fast-install[=PKGS]
+                          optimize for fast installation [default=yes]
+  --disable-libtool-lock  avoid locking (might break parallel builds)
+
+Optional Packages:
+  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
+  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
+  --with-pic[=PKGS]       try to use only PIC/non-PIC objects [default=use
+                          both]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
+  --with-sysroot=DIR Search for dependent libraries within DIR
+                        (or the compiler's sysroot if not specified).
+
+Some influential environment variables:
+  CC          C compiler command
+  CFLAGS      C compiler flags
+  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
+              nonstandard directory <lib dir>
+  LIBS        libraries to pass to the linker, e.g. -l<library>
+  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
+  CPP         C preprocessor
+  CXX         C++ compiler command
+  CXXFLAGS    C++ compiler flags
+  CXXCPP      C++ preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-libtool@gnu.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+  # If there are subdirs, report their specific --help.
+  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+    test -d "$ac_dir" ||
+      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+      continue
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
+    else
+      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
+  done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+  cat <<\_ACEOF
+tagdemo configure 1.0
+generated by GNU Autoconf 2.68
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+  exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_compile
+
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } > conftest.i && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+    ac_retval=1
+fi
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_cpp
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+  as_fn_set_status $ac_retval
+
+} # ac_fn_cxx_try_link
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by tagdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
+
+    $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
+
+    $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  # We do not want a PATH search for config.site.
+  case $CONFIG_SITE in #((
+    -*)  ac_site_file1=./$CONFIG_SITE;;
+    */*) ac_site_file1=$CONFIG_SITE;;
+    *)   ac_site_file1=./$CONFIG_SITE;;
+  esac
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file" \
+      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special files
+  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
+  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in ../../libltdl/config "$srcdir"/../../libltdl/config; do
+  if test -f "$ac_dir/install-sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f "$ac_dir/install.sh"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  elif test -f "$ac_dir/shtool"; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/shtool install -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error $? "cannot find install-sh, install.sh, or shtool in ../../libltdl/config \"$srcdir\"/../../libltdl/config" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if ${ac_cv_target+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "x$target_alias" = x; then
+  ac_cv_target=$ac_cv_host
+else
+  ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+am__api_version='1.11'
+
+# Find a good install program.  We prefer a C program (faster),
+# so one script is as good as another.  But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
+  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+  /usr/ucb/* ) ;;
+  *)
+    # OSF1 and SCO ODT 3.0 have their own names for install.
+    # Don't use installbsd from OSF since it installs stuff as root
+    # by default.
+    for ac_prog in ginstall scoinst install; do
+      for ac_exec_ext in '' $ac_executable_extensions; do
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+	  if test $ac_prog = install &&
+	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # AIX install.  It has an incompatible calling convention.
+	    :
+	  elif test $ac_prog = install &&
+	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+	    # program-specific install script used by HP pwplus--don't use.
+	    :
+	  else
+	    rm -rf conftest.one conftest.two conftest.dir
+	    echo one > conftest.one
+	    echo two > conftest.two
+	    mkdir conftest.dir
+	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+	      test -s conftest.one && test -s conftest.two &&
+	      test -s conftest.dir/conftest.one &&
+	      test -s conftest.dir/conftest.two
+	    then
+	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+	      break 3
+	    fi
+	  fi
+	fi
+      done
+    done
+    ;;
+esac
+
+  done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+  if test "${ac_cv_path_install+set}" = set; then
+    INSTALL=$ac_cv_path_install
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    INSTALL=$ac_install_sh
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+   if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+   fi
+   rm -f conftest.file
+   if test "$*" != "X $srcdir/configure conftest.file" \
+      && test "$*" != "X conftest.file $srcdir/configure"; then
+
+      # If neither matched, then we have a broken ls.  This can happen
+      # if, for instance, CONFIG_SHELL is bash and it inherits a
+      # broken ls alias from the environment.  This has actually
+      # happened.  Such a system could not be considered "sane".
+      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+   fi
+
+   test "$2" = conftest.file
+   )
+then
+   # Ok.
+   :
+else
+   as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+  am_missing_run="$MISSING --run "
+else
+  am_missing_run=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+  if ${ac_cv_path_mkdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in mkdir gmkdir; do
+	 for ac_exec_ext in '' $ac_executable_extensions; do
+	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+	     'mkdir (GNU coreutils) '* | \
+	     'mkdir (coreutils) '* | \
+	     'mkdir (fileutils) '4.1*)
+	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+	       break 3;;
+	   esac
+	 done
+       done
+  done
+IFS=$as_save_IFS
+
+fi
+
+  test -d ./--version && rmdir ./--version
+  if test "${ac_cv_path_mkdir+set}" = set; then
+    MKDIR_P="$ac_cv_path_mkdir -p"
+  else
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for MKDIR_P within a source directory, because that will
+    # break other packages using the cache if that directory is
+    # removed, or if the value is a relative name.
+    MKDIR_P="$ac_install_sh -d"
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+  [\\/$]* | ?:[\\/]*) ;;
+  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AWK"; then
+  ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AWK="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+  SET_MAKE=
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+  SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+  am__leading_dot=.
+else
+  am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+  # is not polluted with repeated "-I."
+  am__isrc=' -I$(srcdir)'
+  # test to see if srcdir already configured
+  if test -f $srcdir/config.status; then
+    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+  fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+  if (cygpath --version) >/dev/null 2>/dev/null; then
+    CYGPATH_W='cygpath -w'
+  else
+    CYGPATH_W=echo
+  fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='tagdemo'
+ VERSION='1.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+
+## ---------------- ##
+## Compiler checks. ##
+## ---------------- ##
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+  ac_ct_CC=$CC
+  # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="gcc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+else
+  CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="${ac_tool_prefix}cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  fi
+fi
+if test -z "$CC"; then
+  # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+  ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+       ac_prog_rejected=yes
+       continue
+     fi
+    ac_cv_prog_CC="cc"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+  # We found a bogon in the path, so make sure we never use it.
+  set dummy $ac_cv_prog_CC
+  shift
+  if test $# != 0; then
+    # We chose a different compiler from the bogus one.
+    # However, it has the same basename, so the bogon will be chosen
+    # first if we set CC to just the basename; use the full file name.
+    shift
+    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+  fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+  if test -n "$ac_tool_prefix"; then
+  for ac_prog in cl.exe
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CC"; then
+  ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CC" && break
+  done
+fi
+if test -z "$CC"; then
+  ac_ct_CC=$CC
+  for ac_prog in cl.exe
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CC"; then
+  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CC="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CC" && break
+done
+
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link_default") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+	;;
+    [ab].out )
+	# We found the default executable, but exeext='' is most
+	# certainly right.
+	break;;
+    *.* )
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
+	break;;
+    * )
+	break;;
+  esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+  ac_file=''
+fi
+if test -z "$ac_file"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+  test -f "$ac_file" || continue
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	  break;;
+    * ) break;;
+  esac
+done
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+  ;
+  return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run.  If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+  { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+  if { ac_try='./conftest$ac_cv_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+    cross_compiling=no
+  else
+    if test "$cross_compiling" = maybe; then
+	cross_compiling=yes
+    else
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+    fi
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+       break;;
+  esac
+done
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GCC=yes
+else
+  GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+else
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+  CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+  if test "$GCC" = yes; then
+    CFLAGS="-g -O2"
+  else
+    CFLAGS="-g"
+  fi
+else
+  if test "$GCC" = yes; then
+    CFLAGS="-O2"
+  else
+    CFLAGS=
+  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+     char **p;
+     int i;
+{
+  return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+  char *s;
+  va_list v;
+  va_start (v,p);
+  s = g (p, va_arg (v,int));
+  va_end (v);
+  return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
+   function prototypes and stuff, but not '\xHH' hex character constants.
+   These don't provoke an error unfortunately, instead are silently treated
+   as 'x'.  The following induces an error, until -std is added to get
+   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
+   array size at least.  It's necessary to write '\x00'==0 to get something
+   that's true only with -std.  */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
+  ;
+  return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+  CC="$ac_save_CC $ac_arg"
+  if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+  xno)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+  *)
+    CC="$CC $ac_cv_prog_cc_c89"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+   echo '.include "confinc"' > confmf
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+  enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+  am_depcomp="$ac_aux_dir/depcomp"
+  AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+  AMDEP_TRUE=
+  AMDEP_FALSE='#'
+else
+  AMDEP_TRUE='#'
+  AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC"   am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CC_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CC_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+  am__fastdepCC_TRUE=
+  am__fastdepCC_FALSE='#'
+else
+  am__fastdepCC_TRUE='#'
+  am__fastdepCC_FALSE=
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+  CPP=
+fi
+if test -z "$CPP"; then
+  if ${ac_cv_prog_CPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CPP needs to be expanded
+    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CPP=$CPP
+
+fi
+  CPP=$ac_cv_prog_CPP
+else
+  ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+if test "x$CC" != xcc; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
+$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
+$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
+fi
+set dummy $CC; ac_cc=`$as_echo "$2" |
+		      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+rm -f conftest2.*
+if { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } &&
+   test -f conftest2.$ac_objext && { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; };
+then
+  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+  if test "x$CC" != xcc; then
+    # Test first that cc exists at all.
+    if { ac_try='cc -c conftest.$ac_ext >&5'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
+      ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+      rm -f conftest2.*
+      if { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } &&
+	 test -f conftest2.$ac_objext && { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; };
+      then
+	# cc works too.
+	:
+      else
+	# cc exists but doesn't like -o.
+	eval ac_cv_prog_cc_${ac_cc}_c_o=no
+      fi
+    fi
+  fi
+else
+  eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f core conftest*
+
+fi
+if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
+
+fi
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+  if test -n "$CCC"; then
+    CXX=$CCC
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_CXX" && break
+done
+
+  if test "x$ac_ct_CXX" = x; then
+    CXX="g++"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CXX=$ac_ct_CXX
+  fi
+fi
+
+  fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+  fi
+  rm -f conftest.er1 conftest.err
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if ${ac_cv_cxx_compiler_gnu+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GXX=yes
+else
+  GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if ${ac_cv_prog_cxx_g+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+else
+  CXXFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+
+else
+  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CXX"  am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CXX_dependencies_compiler_type+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
+
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CXX_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
+
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
+
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if ${ac_cv_prog_CXXCPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Check for namespace support and new-style headers
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler implements namespaces" >&5
+$as_echo_n "checking whether the compiler implements namespaces... " >&6; }
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+namespace A { namespace B { int i = 0; }}
+int
+main ()
+{
+using namespace A::B; return i;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define HAVE_NAMESPACES 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the compiler has ISO C++ iostream" >&5
+$as_echo_n "checking whether the compiler has ISO C++ iostream... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <iostream>
+#ifdef HAVE_NAMESPACES
+using namespace std;
+#endif
+int
+main ()
+{
+cout << "bingo\n"; return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define HAVE_IOSTREAM 1" >>confdefs.h
+
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+
+# Set the test language to C++.
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.2'
+macro_revision='1.3337'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+  ECHO='printf %s\n'
+else
+  # Use this function as a fallback that always works.
+  func_fallback_echo ()
+  {
+    eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+  }
+  ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO ""
+}
+
+case "$ECHO" in
+  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
+
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  if test -n "$DUMPBIN"; then :
+    # Let the user override the test.
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in dumpbin "link -dump"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$DUMPBIN" && break
+  done
+fi
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in dumpbin "link -dump"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DUMPBIN=$ac_ct_DUMPBIN
+  fi
+fi
+
+    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+    *COFF*)
+      DUMPBIN="$DUMPBIN -symbols"
+      ;;
+    *)
+      DUMPBIN=:
+      ;;
+    esac
+  fi
+
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
+
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  mint*)
+    # On MiNT this can take a long time and run out of memory.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  os2*)
+    # The test takes a long time on OS/2.
+    lt_cv_sys_max_cmd_len=8192
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,b/c, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+        ;;
+    esac
+    ;;
+  *-*-cygwin* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+        ;;
+      *-*-cygwin* )
+        lt_cv_to_host_file_cmd=func_convert_file_noop
+        ;;
+      * ) # otherwise, assume *nix
+        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+        ;;
+    esac
+    ;;
+  * ) # unhandled hosts (and "normal" native builds)
+    lt_cv_to_host_file_cmd=func_convert_file_noop
+    ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+  *-*-mingw* )
+    case $build in
+      *-*-mingw* ) # actually msys
+        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+        ;;
+    esac
+    ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    if test "$GCC" != yes; then
+      reload_cmds=false
+    fi
+    ;;
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
+  else
+    # Keep this pattern in sync with the one in func_win32_libid.
+    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
+  fi
+  ;;
+
+cegcc*)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+haiku*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+    ;;
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+    ;;
+  *)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
+    ;;
+  esac
+  ;;
+
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
+  ;;
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
+  ;;
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
+  ;;
+
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+  case $host_os in
+  mingw* | pw32*)
+    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+      want_nocaseglob=yes
+    else
+      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+    fi
+    ;;
+  esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+  # two different shell functions defined in ltmain.sh
+  # decide which to use based on capabilities of $DLLTOOL
+  case `$DLLTOOL --help 2>&1` in
+  *--identify-strict*)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+    ;;
+  *)
+    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+    ;;
+  esac
+  ;;
+*)
+  # fallback: assume linklib IS sharedlib
+  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+  ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  for ac_prog in ar
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$AR"; then
+  ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+    test -n "$AR" && break
+  done
+fi
+if test -z "$AR"; then
+  ac_ct_AR=$AR
+  for ac_prog in ar
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AR"; then
+  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AR="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  test -n "$ac_ct_AR" && break
+done
+
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ar_at_file=no
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  echo conftest.$ac_objext > conftest.lst
+      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+      if test "$ac_status" -eq 0; then
+	# Ensure the archiver fails upon bogus file names.
+	rm -f conftest.$ac_objext libconftest.a
+	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+  (eval $lt_ar_try) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	if test "$ac_status" -ne 0; then
+          lt_cv_ar_at_file=@
+        fi
+      fi
+      rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test "x$lt_cv_ar_at_file" = xno; then
+  archiver_list_spec=
+else
+  archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
+else
+  RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+  darwin*)
+    lock_old_archive_extraction=yes ;;
+  *)
+    lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
+  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+  # Check to see that the pipe works correctly.
+  pipe_works=no
+
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
+
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+   relocations are performed -- see ld's documentation on pseudo-relocs.  */
+# define LT_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data.  */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+	  cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols.  */
+LT_DLSYM_CONST struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_globsym_save_LIBS=$LIBS
+	  lt_globsym_save_CFLAGS=$CFLAGS
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS=$lt_globsym_save_LIBS
+	  CFLAGS=$lt_globsym_save_CFLAGS
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+  nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+  nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+  withval=$with_sysroot;
+else
+  with_sysroot=no
+fi
+
+
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+   if test "$GCC" = yes; then
+     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+   fi
+   ;; #(
+ /*)
+   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+   ;; #(
+ no|'')
+   ;; #(
+ *)
+   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
+$as_echo "${with_sysroot}" >&6; }
+   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+   ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
+  fi
+  rm -rf conftest*
+  ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*)
+        case $host in
+        i?86-*-solaris*)
+          LD="${LD-ld} -m elf_x86_64"
+          ;;
+        sparc*-*-solaris*)
+          LD="${LD-ld} -m elf64_sparc"
+          ;;
+        esac
+        # GNU ld 2.21 introduced _sol2 emulations.  Use them if available.
+        if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+          LD="${LD-ld}_sol2"
+        fi
+        ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
+      ;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$MANIFEST_TOOL"; then
+  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+  # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_MANIFEST_TOOL"; then
+  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_MANIFEST_TOOL" = x; then
+    MANIFEST_TOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+  fi
+else
+  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_path_mainfest_tool=no
+  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+  cat conftest.err >&5
+  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+    lt_cv_path_mainfest_tool=yes
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+  MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	# If there is a non-empty error log, and "single_module"
+	# appears in it, assume the flag caused a linker warning
+        if test -s conftest.err && $GREP single_module conftest.err; then
+	  cat conftest.err >&5
+	# Otherwise, if the output was created with a 0 exit code from
+	# the compiler, it worked.
+	elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
+else
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_force_load=no
+      cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+      echo "$AR cru libconftest.a conftest.o" >&5
+      $AR cru libconftest.a conftest.o 2>&5
+      echo "$RANLIB libconftest.a" >&5
+      $RANLIB libconftest.a 2>&5
+      cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+      _lt_result=$?
+      if test -s conftest.err && $GREP force_load conftest.err; then
+	cat conftest.err >&5
+      elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+	lt_cv_ld_force_load=yes
+      else
+	cat conftest.err >&5
+      fi
+        rm -f conftest.err libconftest.a conftest conftest.c
+        rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+func_stripname_cnf ()
+{
+  case ${2} in
+  .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+  *)  func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+  esac
+} # func_stripname_cnf
+
+
+
+
+
+# Set options
+
+
+
+        enable_dlopen=no
+
+
+  enable_win32_dll=no
+
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; lt_p=${PACKAGE-default}
+    case $withval in
+    yes|no) pic_mode=$withval ;;
+    *)
+      pic_mode=default
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for lt_pkg in $withval; do
+	IFS="$lt_save_ifs"
+	if test "X$lt_pkg" = "X$lt_p"; then
+	  pic_mode=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+  else
+    MAGIC_CMD=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+  case $cc_basename in
+  nvcc*)
+    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+  *)
+    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+  esac
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
+
+fi
+
+
+
+
+
+
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
+
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
+
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static=
+      ;;
+
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
+
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
+
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+
+    case $cc_basename in
+    nvcc*) # Cuda Compiler Driver 2.2
+      lt_prog_compiler_wl='-Xlinker '
+      if test -n "$lt_prog_compiler_pic"; then
+        lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+      fi
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
+
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
+
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    linux* | k*bsd*-gnu | kopensolaris*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      nagfor*)
+	# NAG Fortran compiler
+	lt_prog_compiler_wl='-Wl,-Wl,,'
+	lt_prog_compiler_pic='-PIC'
+	lt_prog_compiler_static='-Bstatic'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl* | bgxl* | bgf* | mpixl*)
+	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	*Sun\ F* | *Sun*Fortran*)
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Qoption ld '
+	  ;;
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+        *Intel*\ [CF]*Compiler*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fPIC'
+	  lt_prog_compiler_static='-static'
+	  ;;
+	*Portland\ Group*)
+	  lt_prog_compiler_wl='-Wl,'
+	  lt_prog_compiler_pic='-fpic'
+	  lt_prog_compiler_static='-Bstatic'
+	  ;;
+	esac
+	;;
+      esac
+      ;;
+
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
+
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
+
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
+
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
+
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
+
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
+
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  esac
+
+  ld_shlibs=yes
+
+  # On some targets, GNU ld is compatible enough with the native linker
+  # that we're better off using the native interface for both.
+  lt_use_gnu_ld_interface=no
+  if test "$with_gnu_ld" = yes; then
+    case $host_os in
+      aix*)
+	# The AIX port of GNU ld has always aspired to compatibility
+	# with the native linker.  However, as the warning in the GNU ld
+	# block says, versions before 2.19.5* couldn't really create working
+	# shared libraries, regardless of the interface used.
+	case `$LD -v 2>&1` in
+	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+	  *)
+	    lt_use_gnu_ld_interface=yes
+	    ;;
+	esac
+	;;
+      *)
+	lt_use_gnu_ld_interface=yes
+	;;
+    esac
+  fi
+
+  if test "$lt_use_gnu_ld_interface" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
+
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *GNU\ gold*) supports_anon_versioning=yes ;;
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
+
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      export_dynamic_flag_spec='${wl}--export-all-symbols'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    haiku*)
+      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      link_all_deplibs=yes
+      ;;
+
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
+
+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=' $pic_flag'
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95* | pgfortran*)
+					# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	nvcc*)	# Cuda Compiler Driver 2.2
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf* | bgf* | bgxlf* | mpixlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	# Also, AIX nm treats weak defined symbols like other global
+	# defined symbols, whereas GNU nm marks them as "W".
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath_+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath_"; then
+    lt_cv_aix_libpath_="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath_
+fi
+
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  if test "$with_gnu_ld" = yes; then
+	    # We only use this code for GNU lds that support --whole-archive.
+	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	  else
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec='$convenience'
+	  fi
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
+
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      case $cc_basename in
+      cl*)
+	# Native MSVC
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	always_export_symbols=yes
+	file_list_spec='@'
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	  else
+	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	  fi~
+	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	  linknames='
+	# The linker will not automatically build a static lib if we build a DLL.
+	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+	enable_shared_with_static_runtimes=yes
+	exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	# Don't use ranlib
+	old_postinstall_cmds='chmod 644 $oldlib'
+	postlink_cmds='lt_outputfile="@OUTPUT@"~
+	  lt_tool_outputfile="@TOOL_OUTPUT@"~
+	  case $lt_outputfile in
+	    *.exe|*.EXE) ;;
+	    *)
+	      lt_outputfile="$lt_outputfile.exe"
+	      lt_tool_outputfile="$lt_tool_outputfile.exe"
+	      ;;
+	  esac~
+	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	    $RM "$lt_outputfile.manifest";
+	  fi'
+	;;
+      *)
+	# Assume MSVC wrapper
+	hardcode_libdir_flag_spec=' '
+	allow_undefined_flag=unsupported
+	# Tell ltmain to make .lib files, not .a files.
+	libext=lib
+	# Tell ltmain to make .dll files, not .so files.
+	shrext_cmds=".dll"
+	# FIXME: Setting linknames here is a bad hack.
+	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+	# The linker will automatically build a .lib file if we build a DLL.
+	old_archive_from_new_cmds='true'
+	# FIXME: Should let the user specify the lib program.
+	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+	enable_shared_with_static_runtimes=yes
+	;;
+      esac
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec=''
+  fi
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
+
+      ;;
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2.*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
+
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
+
+    hpux10*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
+
+    hpux11*)
+      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+
+	  # Older versions of the 11.00 compiler do not understand -b yet
+	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler__b=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS -b"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler__b=yes
+       fi
+     else
+       lt_cv_prog_compiler__b=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test x"$lt_cv_prog_compiler__b" = xyes; then
+    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
+
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
+
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
+
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+	# This should be the same for all languages, so no per-tag cache variable.
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  save_LDFLAGS="$LDFLAGS"
+	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_irix_exported_symbol=yes
+else
+  lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+           LDFLAGS="$save_LDFLAGS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+	if test "$lt_cv_irix_exported_symbol" = yes; then
+          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+	fi
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
+
+    netbsd*)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
+
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
+    esac
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl
+	  pic_flag=$lt_prog_compiler_pic
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag
+	  allow_undefined_flag=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc=no
+	  else
+	    lt_cv_archive_cmds_need_lc=yes
+	  fi
+	  allow_undefined_flag=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  case $host_os in
+    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
+    *) lt_sed_strip_eq="s,=/,/,g" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+  case $lt_search_path_spec in
+  *\;*)
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+    ;;
+  *)
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+    ;;
+  esac
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  # AWK program above erroneously prepends '/' to C:/dos/paths
+  # for these hosts.
+  case $host_os in
+    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+  esac
+  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
+
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
+
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
+
+    ;;
+
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+    ;;
+  esac
+
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
+
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+   correspondingly for the symbols needed.  */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else
+        {
+	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
+          else puts (dlerror ());
+	}
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
+
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
+
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
+
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
+
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+CC="$lt_save_CC"
+
+      if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if ${ac_cv_prog_CXXCPP+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
+
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+else
+  _lt_caught_CXX_error=yes
+fi
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+reload_flag_CXX=$reload_flag
+reload_cmds_CXX=$reload_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_CFLAGS=$CFLAGS
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  CFLAGS=$CXXFLAGS
+  compiler=$CC
+  compiler_CXX=$CC
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+
+
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+    else
+      lt_prog_compiler_no_builtin_flag_CXX=
+    fi
+
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        archive_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          whole_archive_flag_spec_CXX=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
+
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
+
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
+
+    # PORTME: fill in a description of your system's C++ link characteristics
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+    ld_shlibs_CXX=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+      aix[4-9]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
+
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
+
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
+
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        archive_cmds_CXX=''
+        hardcode_direct_CXX=yes
+        hardcode_direct_absolute_CXX=yes
+        hardcode_libdir_separator_CXX=':'
+        link_all_deplibs_CXX=yes
+        file_list_spec_CXX='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[012]|aix4.[012].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    hardcode_direct_CXX=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    hardcode_minus_L_CXX=yes
+	    hardcode_libdir_flag_spec_CXX='-L$libdir'
+	    hardcode_libdir_separator_CXX=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
+
+        export_dynamic_flag_spec_CXX='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        always_export_symbols_CXX=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          allow_undefined_flag_CXX='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+          hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+	    allow_undefined_flag_CXX="-z nodefs"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    if test "${lt_cv_aix_libpath+set}" = set; then
+  aix_libpath=$lt_cv_aix_libpath
+else
+  if ${lt_cv_aix_libpath__CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+
+  lt_aix_libpath_sed='
+      /Import File Strings/,/^$/ {
+	  /^0/ {
+	      s/^0  *\([^ ]*\) *$/\1/
+	      p
+	  }
+      }'
+  lt_cv_aix_libpath__CXX=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  # Check for a 64-bit object if we didn't find anything.
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+  fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  if test -z "$lt_cv_aix_libpath__CXX"; then
+    lt_cv_aix_libpath__CXX="/usr/lib:/lib"
+  fi
+
+fi
+
+  aix_libpath=$lt_cv_aix_libpath__CXX
+fi
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    no_undefined_flag_CXX=' ${wl}-bernotok'
+	    allow_undefined_flag_CXX=' ${wl}-berok'
+	    if test "$with_gnu_ld" = yes; then
+	      # We only use this code for GNU lds that support --whole-archive.
+	      whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    else
+	      # Exported symbols can be pulled into shared objects from archives
+	      whole_archive_flag_spec_CXX='$convenience'
+	    fi
+	    archive_cmds_need_lc_CXX=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
+
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  allow_undefined_flag_CXX=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	  ;;
+        esac
+        ;;
+
+      cygwin* | mingw* | pw32* | cegcc*)
+	case $GXX,$cc_basename in
+	,cl* | no,cl*)
+	  # Native MSVC
+	  # hardcode_libdir_flag_spec is actually meaningless, as there is
+	  # no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX=' '
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=yes
+	  file_list_spec_CXX='@'
+	  # Tell ltmain to make .lib files, not .a files.
+	  libext=lib
+	  # Tell ltmain to make .dll files, not .so files.
+	  shrext_cmds=".dll"
+	  # FIXME: Setting linknames here is a bad hack.
+	  archive_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+	  archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+	    else
+	      $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+	    fi~
+	    $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+	    linknames='
+	  # The linker will not automatically build a static lib if we build a DLL.
+	  # _LT_TAGVAR(old_archive_from_new_cmds, CXX)='true'
+	  enable_shared_with_static_runtimes_CXX=yes
+	  # Don't use ranlib
+	  old_postinstall_cmds_CXX='chmod 644 $oldlib'
+	  postlink_cmds_CXX='lt_outputfile="@OUTPUT@"~
+	    lt_tool_outputfile="@TOOL_OUTPUT@"~
+	    case $lt_outputfile in
+	      *.exe|*.EXE) ;;
+	      *)
+		lt_outputfile="$lt_outputfile.exe"
+		lt_tool_outputfile="$lt_tool_outputfile.exe"
+		;;
+	    esac~
+	    func_to_tool_file "$lt_outputfile"~
+	    if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+	      $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+	      $RM "$lt_outputfile.manifest";
+	    fi'
+	  ;;
+	*)
+	  # g++
+	  # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+	  # as there is no search path for DLLs.
+	  hardcode_libdir_flag_spec_CXX='-L$libdir'
+	  export_dynamic_flag_spec_CXX='${wl}--export-all-symbols'
+	  allow_undefined_flag_CXX=unsupported
+	  always_export_symbols_CXX=no
+	  enable_shared_with_static_runtimes_CXX=yes
+
+	  if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	    # If the export-symbols file already is a .def file (1st line
+	    # is EXPORTS), use it as is; otherwise, prepend...
+	    archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	      cp $export_symbols $output_objdir/$soname.def;
+	    else
+	      echo EXPORTS > $output_objdir/$soname.def;
+	      cat $export_symbols >> $output_objdir/$soname.def;
+	    fi~
+	    $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	  else
+	    ld_shlibs_CXX=no
+	  fi
+	  ;;
+	esac
+	;;
+      darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc_CXX=no
+  hardcode_direct_CXX=no
+  hardcode_automatic_CXX=yes
+  hardcode_shlibpath_var_CXX=unsupported
+  if test "$lt_cv_ld_force_load" = "yes"; then
+    whole_archive_flag_spec_CXX='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+  else
+    whole_archive_flag_spec_CXX=''
+  fi
+  link_all_deplibs_CXX=yes
+  allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=func_echo_all
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+       if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+
+  else
+  ld_shlibs_CXX=no
+  fi
+
+	;;
+
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      freebsd2.*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        ld_shlibs_CXX=no
+        ;;
+
+      freebsd-elf*)
+        archive_cmds_need_lc_CXX=no
+        ;;
+
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        ld_shlibs_CXX=yes
+        ;;
+
+      gnu*)
+        ;;
+
+      haiku*)
+        archive_cmds_CXX='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        link_all_deplibs_CXX=yes
+        ;;
+
+      hpux9*)
+        hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator_CXX=:
+        export_dynamic_flag_spec_CXX='${wl}-E'
+        hardcode_direct_CXX=yes
+        hardcode_minus_L_CXX=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            ld_shlibs_CXX=no
+            ;;
+          aCC*)
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              ld_shlibs_CXX=no
+            fi
+            ;;
+        esac
+        ;;
+
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      export_dynamic_flag_spec_CXX='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct_CXX=no
+            hardcode_shlibpath_var_CXX=no
+            ;;
+          *)
+            hardcode_direct_CXX=yes
+            hardcode_direct_absolute_CXX=yes
+            hardcode_minus_L_CXX=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            archive_cmds_CXX='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      interix[3-9]*)
+	hardcode_direct_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+	      fi
+	    fi
+	    link_all_deplibs_CXX=yes
+	    ;;
+        esac
+        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        hardcode_libdir_separator_CXX=:
+        inherit_rpath_CXX=yes
+        ;;
+
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    archive_cmds_need_lc_CXX=no
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [1-5].* | *pgcpp\ [1-5].*)
+	      prelink_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+	      old_archive_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+		$RANLIB $oldlib'
+	      archive_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      archive_expsym_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 and above use weak symbols
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
+
+	    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+	    runpath_var=LD_RUN_PATH
+	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+	    ;;
+	  xl* | mpixl* | bgxl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      no_undefined_flag_CXX=' -zdefs'
+	      archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      hardcode_libdir_flag_spec_CXX='-R$libdir'
+	      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+	      compiler_needs_object_CXX=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='func_echo_all'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
+
+      m88k*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+	;;
+
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	esac
+	;;
+
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
+
+      *nto* | *qnx*)
+        ld_shlibs_CXX=yes
+	;;
+
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	ld_shlibs_CXX=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	  hardcode_direct_absolute_CXX=yes
+	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='${wl}-E'
+	    whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=func_echo_all
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
+
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        allow_undefined_flag_CXX=' -expect_unresolved \*'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+		;;
+	    esac
+
+	    hardcode_libdir_separator_CXX=:
+
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          archive_cmds_CXX='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	      hardcode_libdir_separator_CXX=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
+
+      psos*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      solaris*)
+        case $cc_basename in
+          CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            archive_cmds_need_lc_CXX=yes
+	    no_undefined_flag_CXX=' -zdefs'
+	    archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    hardcode_libdir_flag_spec_CXX='-R$libdir'
+	    hardcode_shlibpath_var_CXX=no
+	    case $host_os in
+	      solaris2.[0-5] | solaris2.[0-5].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    link_all_deplibs_CXX=yes
+
+	    output_verbose_link_cmd='func_echo_all'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+	    # The C++ compiler must be used to create the archive.
+	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        archive_cmds_CXX='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+	      fi
+
+	      hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[0-5] | solaris2.[0-5].*) ;;
+		*)
+		  whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_CXX='${wl}-z,text'
+      archive_cmds_need_lc_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      runpath_var='LD_RUN_PATH'
+
+      case $cc_basename in
+        CC*)
+	  archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
+
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	no_undefined_flag_CXX='${wl}-z,text'
+	allow_undefined_flag_CXX='${wl}-z,nodefs'
+	archive_cmds_need_lc_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+	hardcode_libdir_separator_CXX=':'
+	link_all_deplibs_CXX=yes
+	export_dynamic_flag_spec_CXX='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
+
+	case $cc_basename in
+          CC*)
+	    archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    old_archive_cmds_CXX='$CC -Tprelink_objects $oldobjs~
+	      '"$old_archive_cmds_CXX"
+	    reload_cmds_CXX='$CC -Tprelink_objects $reload_objs~
+	      '"$reload_cmds_CXX"
+	    ;;
+	  *)
+	    archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
+
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
+
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+    esac
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+    test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+    GCC_CXX="$GXX"
+    LD_CXX="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
+
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case ${prev}${p} in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       fi
+
+       # Expand the sysroot to ease extracting the directories later.
+       if test -z "$prev"; then
+         case $p in
+         -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+         -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+         -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+         esac
+       fi
+       case $p in
+       =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+       esac
+       if test "$pre_test_object_deps_done" = no; then
+	 case ${prev} in
+	 -L | -R)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX="${prev}${p}"
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX="${prev}${p}"
+	 else
+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	 fi
+       fi
+       prev=
+       ;;
+
+    *.lto.$objext) ;; # Ignore GCC LTO objects
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX="$p"
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX="$p"
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC* | sunCC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+
+
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
+      fi
+      ;;
+
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_CXX='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
+
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    haiku*)
+      # PIC is the default for Haiku.
+      # The "-static" flag exists, but is broken.
+      lt_prog_compiler_static_CXX=
+      ;;
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_CXX='-fPIC -shared'
+      ;;
+    *)
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[4-9]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      mingw* | cygwin* | os2* | pw32* | cegcc*)
+	# This hack is so that the source file can tell whether it is being
+	# built for inclusion in a dll (and should export symbols for example).
+	lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu | kopensolaris*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  xlc* | xlC* | bgxl[cC]* | mpixl[cC]*)
+	    # IBM XL 8.0, 9.0 on PPC and BlueGene
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-qpic'
+	    lt_prog_compiler_static_CXX='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      lt_prog_compiler_pic_CXX='-KPIC'
+	      lt_prog_compiler_static_CXX='-Bstatic'
+	      lt_prog_compiler_wl_CXX='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd*)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        lt_prog_compiler_pic_CXX='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC* | sunCC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
+	;;
+    esac
+  fi
+
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_CXX=$lt_prog_compiler_pic_CXX
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_CXX" >&6; }
+lt_prog_compiler_pic_CXX=$lt_cv_prog_compiler_pic_CXX
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works_CXX=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
+
+fi
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_CXX=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:$LINENO: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  case $host_os in
+  aix[4-9]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    # Also, AIX nm treats weak defined symbols like other global defined
+    # symbols, whereas GNU nm marks them as "W".
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX="$ltdll_cmds"
+    ;;
+  cygwin* | mingw* | cegcc*)
+    case $cc_basename in
+    cl*)
+      exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+      ;;
+    *)
+      export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+      exclude_expsyms_CXX='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+      ;;
+    esac
+    ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+    ;;
+  esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
+
+with_gnu_ld_CXX=$with_gnu_ld
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc_CXX+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  $RM conftest*
+	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+	  soname=conftest
+	  lib=conftest
+	  libobjs=conftest.$ac_objext
+	  deplibs=
+	  wl=$lt_prog_compiler_wl_CXX
+	  pic_flag=$lt_prog_compiler_pic_CXX
+	  compiler_flags=-v
+	  linker_flags=-v
+	  verstring=
+	  output_objdir=.
+	  libname=conftest
+	  lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+	  allow_undefined_flag_CXX=
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+	  then
+	    lt_cv_archive_cmds_need_lc_CXX=no
+	  else
+	    lt_cv_archive_cmds_need_lc_CXX=yes
+	  fi
+	  allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+	else
+	  cat conftest.err 1>&5
+	fi
+	$RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc_CXX" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc_CXX" >&6; }
+      archive_cmds_need_lc_CXX=$lt_cv_archive_cmds_need_lc_CXX
+      ;;
+    esac
+  fi
+  ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
+
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
+
+aix[4-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
+
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
+
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
+
+bsdi[45]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
+
+  case $GCC,$cc_basename in
+  yes,*)
+    # gcc
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    dynamic_linker='Win32 ld.exe'
+    ;;
+
+  *,cl*)
+    # Native MSVC
+    libname_spec='$name'
+    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    library_names_spec='${libname}.dll.lib'
+
+    case $build_os in
+    mingw*)
+      sys_lib_search_path_spec=
+      lt_save_ifs=$IFS
+      IFS=';'
+      for lt_path in $LIB
+      do
+        IFS=$lt_save_ifs
+        # Let DOS variable expansion print the short 8.3 style file name.
+        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+      done
+      IFS=$lt_save_ifs
+      # Convert to MSYS style.
+      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+      ;;
+    cygwin*)
+      # Convert to unix form, then to dos form, then back to unix form
+      # but this time dos style (no spaces!) so that the unix form looks
+      # like /cygdrive/c/PROGRA~1:/cygdr...
+      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      ;;
+    *)
+      sys_lib_search_path_spec="$LIB"
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      # FIXME: find the short name or the path components, as spaces are
+      # common. (e.g. "Program Files" -> "PROGRA~1")
+      ;;
+    esac
+
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
+    dynamic_linker='Win32 link.exe'
+    ;;
+
+  *)
+    # Assume MSVC wrapper
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    dynamic_linker='Win32 ld.exe'
+    ;;
+  esac
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
+
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
+
+dgux*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[23].*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2.*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
+
+gnu*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+haiku*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  dynamic_linker="$host_os runtime_loader"
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+  hardcode_into_libs=yes
+  ;;
+
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+  postinstall_cmds='chmod 555 $lib'
+  # or fails outright, so override atomically:
+  install_override_mode=555
+  ;;
+
+interix[3-9]*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux # correct to gnu/linux during the next big refactor
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+
+  # Some binutils ld are patched to set DT_RUNPATH
+  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_shlibpath_overrides_runpath=no
+    save_LDFLAGS=$LDFLAGS
+    save_libdir=$libdir
+    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+    LDFLAGS=$save_LDFLAGS
+    libdir=$save_libdir
+
+fi
+
+  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
+
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
+
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
+
+newsos6)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
+
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
+
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
+
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
+
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
+
+rdos*)
+  dynamic_linker=no
+  ;;
+
+solaris*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
+
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
+
+sysv4 | sysv4.3*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
+
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux # correct to gnu/linux during the next big refactor
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
+
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux # correct to gnu/linux during the next big refactor
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
+  version_type=linux # correct to gnu/linux during the next big refactor
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
+
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+   test -n "$runpath_var_CXX" ||
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_CXX" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+     test "$hardcode_minus_L_CXX" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
+
+if test "$hardcode_action_CXX" = relink ||
+   test "$inherit_rpath_CXX" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  CFLAGS=$lt_save_CFLAGS
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+        ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+## ------------------------------ ##
+## Libraries required by tagdemo. ##
+## ------------------------------ ##
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+  # These system don't have libm, or don't need it
+  ;;
+*-ncr-sysv4.3*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _mwvalidcheckl in -lmw" >&5
+$as_echo_n "checking for _mwvalidcheckl in -lmw... " >&6; }
+if ${ac_cv_lib_mw__mwvalidcheckl+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmw  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char _mwvalidcheckl ();
+int
+main ()
+{
+return _mwvalidcheckl ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  ac_cv_lib_mw__mwvalidcheckl=yes
+else
+  ac_cv_lib_mw__mwvalidcheckl=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mw__mwvalidcheckl" >&5
+$as_echo "$ac_cv_lib_mw__mwvalidcheckl" >&6; }
+if test "x$ac_cv_lib_mw__mwvalidcheckl" = xyes; then :
+  LIBM="-lmw"
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="$LIBM -lm"
+fi
+
+  ;;
+*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  ac_cv_lib_m_cos=yes
+else
+  ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+  LIBM="-lm"
+fi
+
+  ;;
+esac
+
+
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+ac_config_files="$ac_config_files Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    if test "x$cache_file" != "x/dev/null"; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+      if test ! -f "$cache_file" || test -h "$cache_file"; then
+	cat confcache >"$cache_file"
+      else
+        case $cache_file in #(
+        */* | ?:*)
+	  mv -f confcache "$cache_file"$$ &&
+	  mv -f "$cache_file"$$ "$cache_file" ;; #(
+        *)
+	  mv -f confcache "$cache_file" ;;
+	esac
+      fi
+    fi
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
+}
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
+}
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
+
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
+else
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
+fi
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  as_fn_error $? "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by tagdemo $as_me 1.0, which was
+generated by GNU Autoconf 2.68.  Invocation command line was
+
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+      --config     print configuration, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-libtool@gnu.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+tagdemo config.status 1.0
+configured by $0, generated by GNU Autoconf 2.68,
+  with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=?*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  --*=)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --config | --confi | --conf | --con | --co | --c )
+    $as_echo "$ac_cs_config"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    '') as_fn_error $? "missing file argument" ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
+
+  esac
+  shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "$compiler_lib_search_dirs" | $SED "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "$predep_objects" | $SED "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "$postdep_objects" | $SED "$delay_single_quote_subst"`'
+predeps='`$ECHO "$predeps" | $SED "$delay_single_quote_subst"`'
+postdeps='`$ECHO "$postdeps" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "$compiler_lib_search_path" | $SED "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "$LD_CXX" | $SED "$delay_single_quote_subst"`'
+reload_flag_CXX='`$ECHO "$reload_flag_CXX" | $SED "$delay_single_quote_subst"`'
+reload_cmds_CXX='`$ECHO "$reload_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "$old_archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "$compiler_CXX" | $SED "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "$GCC_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "$lt_prog_compiler_no_builtin_flag_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "$lt_prog_compiler_pic_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "$lt_prog_compiler_wl_CXX" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "$lt_prog_compiler_static_CXX" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "$lt_cv_prog_compiler_c_o_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "$archive_cmds_need_lc_CXX" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "$enable_shared_with_static_runtimes_CXX" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "$export_dynamic_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "$whole_archive_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "$compiler_needs_object_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "$old_archive_from_new_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "$old_archive_from_expsyms_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "$archive_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "$archive_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "$module_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "$module_expsym_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "$with_gnu_ld_CXX" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "$allow_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "$no_undefined_flag_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "$hardcode_libdir_flag_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "$hardcode_libdir_separator_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "$hardcode_direct_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "$hardcode_direct_absolute_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "$hardcode_minus_L_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "$hardcode_shlibpath_var_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "$hardcode_automatic_CXX" | $SED "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "$inherit_rpath_CXX" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "$link_all_deplibs_CXX" | $SED "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "$always_export_symbols_CXX" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "$export_symbols_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "$exclude_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "$include_expsyms_CXX" | $SED "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "$prelink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+postlink_cmds_CXX='`$ECHO "$postlink_cmds_CXX" | $SED "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "$file_list_spec_CXX" | $SED "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "$hardcode_action_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "$compiler_lib_search_dirs_CXX" | $SED "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "$predep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "$postdep_objects_CXX" | $SED "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "$predeps_CXX" | $SED "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "$postdeps_CXX" | $SED "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "$compiler_lib_search_path_CXX" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SHELL \
+ECHO \
+PATH_SEPARATOR \
+SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+OBJDUMP \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+DLLTOOL \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+nm_file_list_spec \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+reload_flag_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_separator_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+reload_cmds_CXX \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX \
+postlink_cmds_CXX; do
+    case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+
+
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
+
+
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+
+  *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp= ac_tmp=
+  trap 'exit_status=$?
+  : "${ac_tmp:=$tmp}"
+  { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\\r'
+else
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
+
+}
+{
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+  cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+  || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=[	 ]*/{
+h
+s///
+s/^/:/
+s/[	 ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[	 ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$ac_tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$ac_tmp/stdin" \
+      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
+
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
+
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
+      "$ac_tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined" >&2;}
+
+  rm -f "$ac_tmp/stdin"
+  case $ac_file in
+  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+
+
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
+
+
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
+
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+#                 Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="CXX "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# An object symbol dumper.
+OBJDUMP=$lt_OBJDUMP
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and in which our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '$q' "$ltmain" >> "$cfgfile" \
+     || (rm -f "$cfgfile"; exit 1)
+
+  if test x"$xsi_shell" = xyes; then
+  sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
+func_dirname ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_basename ()$/,/^} # func_basename /c\
+func_basename ()\
+{\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
+func_dirname_and_basename ()\
+{\
+\    case ${1} in\
+\      */*) func_dirname_result="${1%/*}${2}" ;;\
+\      *  ) func_dirname_result="${3}" ;;\
+\    esac\
+\    func_basename_result="${1##*/}"\
+} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
+func_stripname ()\
+{\
+\    # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
+\    # positional parameters, so assign one to ordinary parameter first.\
+\    func_stripname_result=${3}\
+\    func_stripname_result=${func_stripname_result#"${1}"}\
+\    func_stripname_result=${func_stripname_result%"${2}"}\
+} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
+func_split_long_opt ()\
+{\
+\    func_split_long_opt_name=${1%%=*}\
+\    func_split_long_opt_arg=${1#*=}\
+} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
+func_split_short_opt ()\
+{\
+\    func_split_short_opt_arg=${1#??}\
+\    func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
+} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
+func_lo2o ()\
+{\
+\    case ${1} in\
+\      *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
+\      *)    func_lo2o_result=${1} ;;\
+\    esac\
+} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_xform ()$/,/^} # func_xform /c\
+func_xform ()\
+{\
+    func_xform_result=${1%.*}.lo\
+} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_arith ()$/,/^} # func_arith /c\
+func_arith ()\
+{\
+    func_arith_result=$(( $* ))\
+} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_len ()$/,/^} # func_len /c\
+func_len ()\
+{\
+    func_len_result=${#1}\
+} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+fi
+
+if test x"$lt_shell_append" = xyes; then
+  sed -e '/^func_append ()$/,/^} # func_append /c\
+func_append ()\
+{\
+    eval "${1}+=\\${2}"\
+} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
+func_append_quoted ()\
+{\
+\    func_quote_for_eval "${2}"\
+\    eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
+} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
+  && mv -f "$cfgfile.tmp" "$cfgfile" \
+    || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+
+
+  # Save a `func_append' function call where possible by direct use of '+='
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+else
+  # Save a `func_append' function call even when '+=' is not available
+  sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+    && mv -f "$cfgfile.tmp" "$cfgfile" \
+      || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+  test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
+$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
+fi
+
+
+   mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag_CXX
+reload_cmds=$lt_reload_cmds_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
+
+ ;;
+
+  esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded.  So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status.  When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+  ac_cs_success=:
+  ac_config_status_args=
+  test "$silent" = yes &&
+    ac_config_status_args="$ac_config_status_args --quiet"
+  exec 5>/dev/null
+  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+  exec 5>>config.log
+  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+  # would make configure fail if this is the last instruction.
+  $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/tests/tagdemo/configure.ac b/tests/tagdemo/configure.ac
new file mode 100644
index 0000000..d97a6de
--- /dev/null
+++ b/tests/tagdemo/configure.ac
@@ -0,0 +1,96 @@
+# Process this file with autoconf to create configure. -*- autoconf -*-
+#
+#   Copyright (C) 2001, 2003, 2004, 2005, 2007 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AC_PREREQ(2.54)
+
+
+## ------------------------ ##
+## Autoconf initialisation. ##
+## ------------------------ ##
+AC_INIT([tagdemo], [1.0], [bug-libtool@gnu.org])
+AC_CONFIG_SRCDIR([foo.cpp])
+AC_CONFIG_AUX_DIR([../../libltdl/config])
+
+AC_CANONICAL_TARGET
+
+
+## ------------------------ ##
+## Automake Initialisation. ##
+## ------------------------ ##
+AM_INIT_AUTOMAKE
+
+
+## ---------------- ##
+## Compiler checks. ##
+## ---------------- ##
+AC_PROG_CC
+AC_PROG_CPP
+AC_PROG_CC_C_O
+
+AC_PROG_CXX
+AC_PROG_CXXCPP
+
+# Check for namespace support and new-style headers
+AC_LANG_PUSH([C++])
+AC_MSG_CHECKING([whether the compiler implements namespaces])
+AC_COMPILE_IFELSE(
+    [AC_LANG_PROGRAM([[namespace A { namespace B { int i = 0; }}]],
+		     [[using namespace A::B; return i;]])],
+    [AC_MSG_RESULT([yes])
+     AC_DEFINE([HAVE_NAMESPACES],[1],
+	       [define if the compiler implements namespaces])],
+    [AC_MSG_RESULT([no])])
+
+AC_MSG_CHECKING([whether the compiler has ISO C++ iostream])
+AC_COMPILE_IFELSE(
+    [AC_LANG_PROGRAM([[#include <iostream>
+#ifdef HAVE_NAMESPACES
+using namespace std;
+#endif ]], [[cout << "bingo\n"; return 0;]])],
+    [AC_MSG_RESULT([yes])
+     AC_DEFINE([HAVE_IOSTREAM],[1],
+	       [define if the compiler has ISO C++ iostream])],
+    [AC_MSG_RESULT([no])])
+AC_LANG_POP([C++])
+
+
+## ----------------------- ##
+## Libtool initialisation. ##
+## ----------------------- ##
+
+# Set the test language to C++.
+AC_LANG([C++])
+LT_INIT
+
+
+## ------------------------------ ##
+## Libraries required by tagdemo. ##
+## ------------------------------ ##
+LT_LIB_M
+
+
+## -------- ##
+## Outputs. ##
+## -------- ##
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
diff --git a/tests/tagdemo/conv.cpp b/tests/tagdemo/conv.cpp
new file mode 100644
index 0000000..44f7000
--- /dev/null
+++ b/tests/tagdemo/conv.cpp
@@ -0,0 +1,32 @@
+// -*- C++ -*-
+//    conv.cpp -- trivial convenience test library
+//
+//    Copyright (C) 1998-2000 Free Software Foundation, Inc.
+//    Written by Thomas Tanner, 1998
+//
+//    This file is part of GNU Libtool.
+//
+// GNU Libtool is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License as
+// published by the Free Software Foundation; either version 2 of
+// the License, or (at your option) any later version.
+//
+// GNU Libtool is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with GNU Libtool; see the file COPYING.  If not, a copy
+// can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+// or obtained by writing to the Free Software Foundation, Inc.,
+// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+#include "conv.h"
+
+// Our C functions.
+int
+convenience(void)
+{
+  return 1;
+}
diff --git a/tests/tagdemo/conv.h b/tests/tagdemo/conv.h
new file mode 100644
index 0000000..56ff71b
--- /dev/null
+++ b/tests/tagdemo/conv.h
@@ -0,0 +1,35 @@
+// -*- C++ -*-
+//    conv.h -- part of the interface to the libfoo* libraries
+//
+//    Copyright (C) 1998-1999 Free Software Foundation, Inc.
+//    Written by Thomas Tanner, 1998
+//
+//    This file is part of GNU Libtool.
+//
+// GNU Libtool is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License as
+// published by the Free Software Foundation; either version 2 of
+// the License, or (at your option) any later version.
+//
+// GNU Libtool is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with GNU Libtool; see the file COPYING.  If not, a copy
+// can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+// or obtained by writing to the Free Software Foundation, Inc.,
+// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+// Only include this header file once.
+#ifndef _CONV_H_
+#define _CONV_H_ 1
+
+// Our C test functions.
+extern "C"
+{
+  int convenience(void);
+}
+
+#endif /* !_CONV_H_ */
diff --git a/tests/tagdemo/foo.cpp b/tests/tagdemo/foo.cpp
new file mode 100644
index 0000000..2572619
--- /dev/null
+++ b/tests/tagdemo/foo.cpp
@@ -0,0 +1,68 @@
+// -*- C++ -*-
+//    foo.cpp -- trivial test library
+//
+//    Copyright (C) 1998-2000, 2007 Free Software Foundation, Inc.
+//    Written by Thomas Tanner, 1998
+//
+//    This file is part of GNU Libtool.
+//
+// GNU Libtool is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License as
+// published by the Free Software Foundation; either version 2 of
+// the License, or (at your option) any later version.
+//
+// GNU Libtool is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with GNU Libtool; see the file COPYING.  If not, a copy
+// can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+// or obtained by writing to the Free Software Foundation, Inc.,
+// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+#include "foo.h"
+#ifdef HAVE_IOSTREAM
+# include <iostream>
+#else
+# include <iostream.h>
+#endif
+#ifdef HAVE_NAMESPACES
+namespace std { }
+using namespace std;
+#endif
+
+#include <math.h>
+
+// Our C functions.
+int
+foo(void)
+{
+  cout << "cos (0.0) = " << (double) cos ((double) 0.0) << endl;
+  return FOO_RET;
+}
+
+int
+hello(void)
+{
+  cout << "** This is libfoo (tagdemo) **" << endl;
+  return HELLO_RET;
+}
+
+
+// --------------------------------------------------------------------
+// Our C++ derived class methods.
+
+
+int
+foobar_derived::foo(void)
+{
+  return ::foo();
+}
+
+int
+foobar_derived::hello(void)
+{
+  return ::hello();
+}
diff --git a/tests/tagdemo/foo.h b/tests/tagdemo/foo.h
new file mode 100644
index 0000000..e7d6746
--- /dev/null
+++ b/tests/tagdemo/foo.h
@@ -0,0 +1,59 @@
+// -*- C++ -*-
+//    foo.h -- interface to the libfoo* libraries
+//
+//    Copyright (C) 1998-1999 Free Software Foundation, Inc.
+//    Written by Thomas Tanner, 1998
+//
+//    This file is part of GNU Libtool.
+//
+// GNU Libtool is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License as
+// published by the Free Software Foundation; either version 2 of
+// the License, or (at your option) any later version.
+//
+// GNU Libtool is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with GNU Libtool; see the file COPYING.  If not, a copy
+// can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+// or obtained by writing to the Free Software Foundation, Inc.,
+// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+// Only include this header file once.
+#ifndef _FOO_H_
+#define _FOO_H_ 1
+
+// Silly constants that the functions return.
+#define HELLO_RET 0xe110
+#define FOO_RET 0xf00
+
+// Our C test functions.
+extern "C"
+{
+  int foo(void);
+  int hello(void);
+}
+
+// Our test C++ base class.
+class foobar
+{
+public:
+  virtual int foo(void) = 0;
+  virtual int hello(void) = 0;
+  // Some dummy pure virtual functions.
+};
+
+
+// Our test C++ derived class.
+class foobar_derived : public foobar
+{
+public:
+  virtual int foo(void);
+  virtual int hello(void);
+  // Override the base class' pure virtual functions.
+};
+
+#endif /* !_FOO_H_ */
diff --git a/tests/tagdemo/main.cpp b/tests/tagdemo/main.cpp
new file mode 100644
index 0000000..ea642c3
--- /dev/null
+++ b/tests/tagdemo/main.cpp
@@ -0,0 +1,79 @@
+// -*- C++ -*-
+//    main.cpp -- tagdemo test program
+//
+//    Copyright (C) 1998-2000 Free Software Foundation, Inc.
+//    Written by Thomas Tanner, 1998
+//
+//    This file is part of GNU Libtool.
+//
+// GNU Libtool is free software; you can redistribute it and/or
+// modify it under the terms of the GNU General Public License as
+// published by the Free Software Foundation; either version 2 of
+// the License, or (at your option) any later version.
+//
+// GNU Libtool is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with GNU Libtool; see the file COPYING.  If not, a copy
+// can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+// or obtained by writing to the Free Software Foundation, Inc.,
+// 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+#include "foo.h"
+#include "baz.h"
+#include "conv.h"
+#ifdef HAVE_IOSTREAM
+# include <iostream>
+#else
+# include <iostream.h>
+#endif
+#ifdef HAVE_NAMESPACES
+namespace std { }
+using namespace std;
+#endif
+
+
+int
+main (int, char *[])
+{
+  cout << "Welcome to GNU libtool tagdemo C++!" << endl;
+
+  foobar_derived FB;
+  // Instantiate the derived class.
+
+  foobar *fb = &FB;
+  // Have some fun with polymorphism.
+
+  int value = fb->hello();
+
+  cout << "foobar::hello returned: " << value << endl;
+  if (value == HELLO_RET)
+    cout << "foobar::hello is ok!" << endl;
+
+  if (fb->foo() == FOO_RET)
+    cout << "foobar::foo is ok!" << endl;
+
+  // --------------
+
+  barbaz_derived BB;
+  // Instantiate the derived class.
+
+  barbaz *bb = &BB;
+  // Have some fun with polymorphism.
+
+
+  // barbaz_derived::baz() should return FOO_RET since it calls
+  // foobar_derived::foo(), which in turn calls ::foo().
+  if (bb->baz() == FOO_RET)
+    cout << "barbaz::baz is ok!" << endl;
+
+  // --------------
+
+  if (convenience())
+    cout << "convenience is ok!" << endl;
+
+  return 0;
+}
diff --git a/tests/tagtrace.test b/tests/tagtrace.test
new file mode 100755
index 0000000..4799747
--- /dev/null
+++ b/tests/tagtrace.test
@@ -0,0 +1,71 @@
+#! /bin/sh
+# tagtrace.test - check the LT_SUPPORTED_TAGS interface
+#
+#   Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+. tests/defs || exit 1
+
+: ${fnord=$srcdir/fnord$$}
+
+$AUTOCONF --version > /dev/null 2>&1 || func_skip "This test requires GNU Autoconf"
+if touch $fnord; then
+  rm $fnord
+else
+  func_skip "This test requires write access to the source tree"
+fi
+
+( cd "$srcdir" && $AUTOCONF --trace 'LT_SUPPORTED_TAG:$1' ) >/dev/null
+ret=$?
+if test $ret -eq 63 || test $ret -eq 1; then
+  func_error "This test requires the same Autoconf version"
+  func_skip  "as the one that was used to bootstrap Libtool"
+elif test $ret -ne 0; then
+  func_fatal_error "\`$AUTOCONF --trace' exited $ret"
+fi
+
+# Abort as soon as something fails.
+set -e
+
+# Retrieve the list of tags supported by our main libtool script.
+traced_tags=`cd "$srcdir" && $AUTOCONF --trace 'LT_SUPPORTED_TAG:$1'`
+
+test -n "$traced_tags"
+
+# Ensure each of them is accepted by --tag.
+# (We do some useless operation like erasing an empty file, because
+# we are just interested in whether --tag accepts the tag or not.)
+for tag in $traced_tags; do
+  $LIBTOOL -n --mode=link --tag=$tag compiler -o liba.la foo.lo >output 2>&1
+  cat output
+  if grep 'ignoring unknown tag' output; then
+    exit $EXIT_FAILURE
+  else
+    :
+  fi
+done
+
+# Ensure the above command would have failed for unknown tags
+$LIBTOOL -n --mode=link --tag=UnKnOwN compiler -o liba.la foo.lo >output 2>&1
+cat output
+grep 'ignoring unknown tag' output
+
+rm -f output
diff --git a/tests/template.at b/tests/template.at
new file mode 100644
index 0000000..1729778
--- /dev/null
+++ b/tests/template.at
@@ -0,0 +1,318 @@
+# template.at -- test C++ templates with libtool              -*- Autotest -*-
+#
+#   Copyright (C) 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Markus Christen, 2005
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_BANNER([C++ template tests.])
+
+AT_SETUP([simple template test])
+LT_AT_TAG([CXX])
+AT_KEYWORDS([libtool])
+
+AT_DATA(aclib.h,
+[[int cf(int);
+]])
+
+AT_DATA(aclib.cpp,
+[[#include "aclib.h"
+template<typename T>
+
+T cq(T b)
+{
+  return b * 3;
+}
+
+int cf(int i)
+{
+  return cq(i);
+}
+]])
+
+AT_DATA(alib.h,
+[[int f(int);
+]])
+
+AT_DATA(alib.cpp,
+[[#include "alib.h"
+
+template<typename T>
+T q(T b)
+{
+  return b * 2;
+}
+
+int f(int i)
+{
+  return q(i);
+}
+]])
+
+AT_DATA(prog.cpp,
+[[#include "alib.h"
+#include "aclib.h"
+
+int main()
+{
+  return f(3) + 3 - cf(3) != 0;
+}
+]])
+
+AT_CHECK([$LIBTOOL --tag=CXX --mode=compile $CXX -I. $CPPFLAGS $CXXFLAGS -c -o alib.lo alib.cpp],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=compile $CXX -I. $CPPFLAGS $CXXFLAGS -c -o aclib.lo aclib.cpp],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CPPFLAGS $CXXFLAGS $LDFLAGS -o libaclib.la aclib.lo],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CPPFLAGS $CXXFLAGS $LDFLAGS -o libalib.la -rpath /nonexistent alib.lo libaclib.la],
+	 [0], [ignore], [ignore])
+AT_CHECK([$CXX -I. $CPPFLAGS $CXXFLAGS -c prog.cpp],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CPPFLAGS $CXXFLAGS $LDFLAGS -o prog$EXEEXT prog.$OBJEXT libalib.la],
+	 [0], [ignore], [ignore])
+
+LT_AT_EXEC_CHECK([./prog], [0], [ignore], [ignore])
+
+
+dnl with autoreconf, use:
+
+dnl AT_DATA(configure.ac,
+dnl [[AC_INIT([template_1], ]]AT_PACKAGE_VERSION[[, ]]AT_PACKAGE_BUGREPORT[[)
+dnl AC_CONFIG_HEADERS([config.h:config-h.in])
+dnl AC_CONFIG_MACRO_DIR([m4])
+dnl AC_CONFIG_AUX_DIR([config])
+dnl AM_INIT_AUTOMAKE([foreign])
+dnl AC_LANG([C++])
+dnl AC_PROG_CXX
+dnl AC_PROG_LIBTOOL
+dnl AC_CONFIG_FILES([Makefile])
+dnl AC_OUTPUT
+dnl ]])
+
+dnl AT_DATA(Makefile.am,
+dnl [[ACLOCAL_AMFLAGS = -I m4
+dnl noinst_LTLIBRARIES = libaclib.la
+dnl libaclib_la_SOURCES = aclib.cpp aclib.h
+dnl lib_LTLIBRARIES = libalib.la
+dnl include_HEADERS = alib.h
+dnl libalib_la_SOURCES = alib.cpp
+dnl libalib_la_LIBADD = libaclib.la
+dnl bin_PROGRAMS = prog
+dnl prog_SOURCES = prog.cpp
+dnl LDADD = libalib.la
+dnl ]])
+
+AT_CLEANUP
+
+
+AT_SETUP([template test with subdirs])
+LT_AT_TAG([CXX])
+AT_KEYWORDS([libtool])
+
+noskip=:
+# Mac OS X.
+# The linker has issues with this test. 
+case $host in
+*-darwin*) noskip=false ;;
+esac
+
+
+CPPFLAGS="$CPPFLAGS -I../src/lib -I../src/lib2"
+
+mkdir src obj
+( cd src; mkdir lib lib2 sub )
+( cd obj; mkdir lib lib2 sub )
+
+AT_DATA(src/lib/a.hh,
+[[template <class T>
+unsigned int a(const T&);
+
+template <class T>
+unsigned int a(const T& t)
+{
+  return sizeof t;
+}
+
+extern int a2(char t);
+
+inline int a3(const double* t)
+{
+  return a(t);
+}
+]])
+
+AT_DATA(src/lib/a.cpp,
+[[#include "a.hh"
+
+int a2(char t)
+{
+  return a(t);
+}
+]])
+
+AT_DATA(src/lib2/b.hh,
+[[#include "a.hh"
+
+template <class T>
+unsigned int b(T& t)
+{
+  return a(t);
+}
+extern int b2(char* t);
+struct bs { int bi; };
+extern int b3(bs t);
+]])
+
+AT_DATA(src/lib2/b.cpp,
+[[#include "b.hh"
+
+int b2(char* t)
+{
+  return a2(t[0]);
+}
+
+int b3(bs t)
+{
+  return b(t);
+}
+]])
+
+AT_DATA(src/sub/main.cpp,
+[[#include "b.hh"
+
+int main()
+{
+  double foo;
+  const char s = ' ';
+  char d;
+  char *t = &d;
+  return b(foo) + a3(&foo) + b2(t) - a(s)
+         - (sizeof(double) + sizeof(double*));
+}
+]])
+
+cd obj
+
+# If the compiler supports -c -o, we want to use it:
+# it may make a difference for templates
+eval `$LIBTOOL --tag=CXX --config | grep ^compiler_c_o=`
+case $compiler_c_o in
+yes)
+  main_o=sub/main.$OBJEXT
+  AT_CHECK([$CXX $CPPFLAGS $CXXFLAGS -c -o $main_o ../src/sub/main.cpp],
+  	   [0], [ignore], [ignore])
+  ;;
+*)
+  main_o=main.$OBJEXT
+  AT_CHECK([$CXX $CPPFLAGS $CXXFLAGS -c ../src/sub/main.cpp],
+  	   [0], [ignore], [ignore])
+  ;;
+esac
+
+AT_CHECK([$LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS -c -o lib/a.lo ../src/lib/a.cpp],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS -c -o lib2/b.lo ../src/lib2/b.cpp],
+	 [0], [ignore], [ignore])
+AT_CHECK([$CXX $CPPFLAGS $CXXFLAGS -c ../src/sub/main.cpp],
+	 [0], [ignore], [ignore])
+# both convenience
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib/liba.la lib/a.lo],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la lib/liba.la],
+	 [0], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./sub/main], [ignore])
+# lib convenience
+if $noskip; then
+  AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo -rpath /foo],
+	   [0], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la lib/liba.la],
+	   [0], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([./sub/main])
+fi
+
+# both installed
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib/liba.la lib/a.lo -rpath /foo],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo -rpath /bar],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la lib/liba.la],
+	 [0], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./sub/main])
+# both convenience, libb depending on liba
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib/liba.la lib/a.lo],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la],
+	 [0], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la],
+	 [0], [ignore], [ignore])
+LT_AT_EXEC_CHECK([./sub/main])
+# lib convenience
+if $noskip; then
+
+  AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la -rpath /foo],
+  	 [0], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la],
+  	 [0], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([./sub/main])
+fi
+# both installed
+if $noskip; then
+  AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la -rpath /bar],
+  	 [0], [ignore], [ignore])
+  AT_CHECK([$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la],
+  	 [0], [ignore], [ignore])
+  LT_AT_EXEC_CHECK([./sub/main])
+fi
+
+cd ..
+
+AT_CHECK([$noskip || (exit 77)])
+
+dnl with autoreconf use:
+dnl
+dnl AT_DATA(src/configure.ac,
+dnl [[AC_INIT([template_2], ]]AT_PACKAGE_VERSION[[, ]]AT_PACKAGE_BUGREPORT[[)
+dnl AC_CONFIG_HEADERS([config.h:config-h.in])
+dnl AC_CONFIG_MACRO_DIR([m4])
+dnl AC_CONFIG_AUX_DIR([config])
+dnl AM_INIT_AUTOMAKE([foreign subdir-objects])
+dnl AC_LANG([C++])
+dnl AC_PROG_CXX
+dnl AC_PROG_LIBTOOL
+dnl AC_CONFIG_FILES([Makefile])
+dnl AC_OUTPUT
+dnl ]])
+dnl
+dnl AT_DATA(src/Makefile.am,
+dnl [[ACLOCAL_AMFLAGS = -I m4
+dnl INCLUDES = -I$(srcdir)/lib -I$(srcdir)/lib2
+dnl bin_PROGRAMS = sub/main
+dnl noinst_LTLIBRARIES = lib/liba.la lib2/libb.la
+dnl lib_liba_la_SOURCES = lib/a.cpp lib/a.hh
+dnl lib2_libb_la_SOURCES = lib2/b.cpp lib2/b.hh
+dnl #lib2_libb_la_LIBADD = lib/liba.la
+dnl sub_main_SOURCES = sub/main.cpp
+dnl sub_main_LDADD = lib2/libb.la lib/liba.la
+dnl ]])
+
+AT_CLEANUP
diff --git a/tests/testsuite b/tests/testsuite
new file mode 100755
index 0000000..64b95ae
--- /dev/null
+++ b/tests/testsuite
@@ -0,0 +1,28703 @@
+#! /bin/sh
+# Generated from testsuite.at by GNU Autoconf 2.68.
+#
+# Copyright (C) 2009, 2010 Free Software Foundation, Inc.
+#
+# This test suite is free software; the Free Software Foundation gives
+# unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
+fi
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
+else
+  as_have_required=no
+fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  as_found=:
+  case $as_dir in #(
+	 /*)
+	   for as_base in sh bash ksh sh5; do
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
+	   done;;
+       esac
+  as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	# Preserve -v and -x to the replacement shell.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+	export CONFIG_SHELL
+	case $- in # ((((
+	  *v*x* | *x*v* ) as_opts=-vx ;;
+	  *v* ) as_opts=-v ;;
+	  *x* ) as_opts=-x ;;
+	  * ) as_opts= ;;
+	esac
+	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+fi
+
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
+else
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$1; test $as_status -eq 0 && as_status=1
+  if test "$4"; then
+    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+  fi
+  $as_echo "$as_me: error: $2" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
+    sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
+      N
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+      t loop
+      s/-\n.*//
+    ' >$as_me.lineno &&
+  chmod +x "$as_me.lineno" ||
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+  # Don't try to exec as it changes $[0], causing all sort of problems
+  # (the dirname of $[0] is not the place where we might find the
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
+  # Exit status is that of the last command.
+  exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# How were we run?
+at_cli_args="$@"
+
+
+# Not all shells have the 'times' builtin; the subshell is needed to make
+# sure we discard the 'times: not found' message from the shell.
+at_times_p=false
+(times) >/dev/null 2>&1 && at_times_p=:
+
+# CLI Arguments to pass to the debugging scripts.
+at_debug_args=
+# -e sets to true
+at_errexit_p=false
+# Shall we be verbose?  ':' means no, empty means yes.
+at_verbose=:
+at_quiet=
+# Running several jobs in parallel, 0 means as many as test groups.
+at_jobs=1
+at_traceon=:
+at_trace_echo=:
+at_check_filter_trace=:
+
+# Shall we keep the debug scripts?  Must be `:' when the suite is
+# run by a debug script, so that the script doesn't remove itself.
+at_debug_p=false
+# Display help message?
+at_help_p=false
+# Display the version message?
+at_version_p=false
+# List test groups?
+at_list_p=false
+# --clean
+at_clean=false
+# Test groups to run
+at_groups=
+# Whether to rerun failed tests.
+at_recheck=
+# Whether a write failure occurred
+at_write_fail=0
+
+# The directory we run the suite in.  Default to . if no -C option.
+at_dir=`pwd`
+# An absolute reference to this testsuite script.
+case $as_myself in
+  [\\/]* | ?:[\\/]* ) at_myself=$as_myself ;;
+  * ) at_myself=$at_dir/$as_myself ;;
+esac
+# Whether -C is in effect.
+at_change_dir=false
+
+# Whether to enable colored test results.
+at_color=auto
+# List of the tested programs.
+at_tested=''
+# As many question marks as there are digits in the last test group number.
+# Used to normalize the test group numbers so that `ls' lists them in
+# numerical order.
+at_format='???'
+# Description of all the test groups.
+at_help_all="1;getopt-m4sh.at:85;short option splitting;;
+2;getopt-m4sh.at:98;enhanced shell short option splitting;;
+3;getopt-m4sh.at:119;long option splitting;;
+4;getopt-m4sh.at:132;XSI long option splitting;;
+5;getopt-m4sh.at:153;option appending;;
+6;getopt-m4sh.at:169;enhanced shell option appending;;
+7;libtoolize.at:83;libtoolize macro installation;libtoolize;
+8;libtoolize.at:108;libtoolize macro directory mismatch error;libtoolize;
+9;libtoolize.at:128;libtoolize macro serial update;libtoolize;
+10;libtoolize.at:201;libtoolize config files serial update;libtoolize;
+11;libtoolize.at:281;diagnose missing LT_CONFIG_LTDL_DIR;libtoolize;
+12;libtoolize.at:426;copy ltdl.m4 with shared macro directory;libtoolize;
+13;libtoolize.at:438;correctly parse LTDL_INIT from configure.ac;libtoolize;
+14;libtoolize.at:450;diagnose missing LTDL_INIT invocation;libtoolize;
+15;libtoolize.at:527;upgrading verbatim style aclocal.m4;libtoolize automake;
+16;libtoolize.at:651;verbatim aclocal.m4 w/o AC_CONFIG_MACRO_DIR;libtoolize automake;
+17;libtoolize.at:783;nonrecursive ltdl with AC_CONFIG_MACRO_DIR;libtoolize;
+18;libtoolize.at:854;subproject ltdl with non-shared directories;libtoolize;
+19;libtoolize.at:945;LIBTOOLIZE_OPTIONS;libtoolize;
+20;libtoolize.at:992;cleanup old installation;libtoolize;
+21;help.at:26;standard command line options;libtool libtoolize;
+22;help.at:45;mode short-hands;;
+23;help.at:97;debug tracing;;
+24;duplicate_members.at:25;duplicate members in archive tests;libtool;
+25;duplicate_conv.at:25;duplicate convenience archive names;libtool;
+26;duplicate_deps.at:25;preserve duplicate convenience deps;libtool;
+27;flags.at:24;passing CC flags through libtool;libtool cc;
+28;flags.at:24;passing CXX flags through libtool;libtool cxx;
+29;flags.at:24;passing F77 flags through libtool;libtool f77;
+30;flags.at:24;passing FC flags through libtool;libtool fc;
+31;flags.at:24;passing GCJ flags through libtool;libtool gcj;
+32;inherited_flags.at:26;inherited_linker_flags;libtool;
+33;convenience.at:31;C convenience archives;libtool;
+34;convenience.at:70;C++ convenience archives;cxx libtool;
+35;convenience.at:110;F77 convenience archives;f77 libtool;
+36;convenience.at:170;FC convenience archives;fc libtool;
+37;convenience.at:230;Java convenience archives;gcj libtool;
+38;link-order.at:26;Link order test;libtool;
+39;link-order2.at:46;Link order of deplibs;libtool interactive;
+40;fail.at:27;Failure tests;libtool;
+41;shlibpath.at:25;shlibpath_overrides_runpath;libtool;
+42;runpath-in-lalib.at:25;Runpath in libtool library files;libtool;
+43;static.at:68;static linking flags for programs;libtool interactive;
+44;static.at:358;ccache -all-static;;
+45;export.at:25;Export test;libtool;
+46;search-path.at:24;sys_lib_search_path;libtool;
+47;search-path.at:62;sys_lib_search_path on w32;libtool;
+48;indirect_deps.at:25;indirect convenience;libtool;
+49;indirect_deps.at:71;indirect uninstalled;libtool;
+50;archive-in-archive.at:26;static library contains static library;libtool;
+51;exeext.at:26;both of -o prog and -o prog\$EXEEXT work;libtool;
+52;execute-mode.at:25;execute mode;libtool;
+53;bindir.at:64;bindir basic lib test;;
+54;bindir.at:173;bindir install tests;;
+55;cwrapper.at:25;cwrapper for uninstalled executables;libtool;
+56;cwrapper.at:138;cwrapper string length;;
+57;cwrapper.at:201;cwrapper and installed shared libraries;libtool;
+58;deplib-in-subdir.at:34;deplib in subdir;libtool;
+59;infer-tag.at:30;inferred tag;libtool;
+60;infer-tag.at:42;CXX inferred tag;cxx libtool;
+61;infer-tag.at:55;F77 inferred tag;f77 libtool;
+62;infer-tag.at:69;FC inferred tag;fc libtool;
+63;infer-tag.at:83;GCJ inferred tag;gcj libtool;
+64;localization.at:24;localized compiler messages;libtool;
+65;nocase.at:26;nocase library search;libtool;
+66;install.at:25;Install tests;libtool;
+67;versioning.at:24;versioning;libtool;
+68;destdir.at:48;Simple DESTDIR install;libtool;
+69;destdir.at:75;DESTDIR with in-package deplibs;libtool;
+70;old-m4-iface.at:40;AM_PROG_LIBTOOL;libtoolize autoconf;
+71;old-m4-iface.at:112;AC_WITH_LTDL;libtoolize automake autoconf;
+72;am-subdir.at:33;C subdir-objects;libtoolize automake autoconf;
+73;am-subdir.at:93;C++ subdir-objects;cxx libtoolize automake autoconf;
+74;lt_dlexit.at:30;lt_dlexit unloading libs;libltdl;
+75;lt_dladvise.at:28;lt_dlopenadvise library loading;libltdl;
+76;lt_dlopen.at:23;lt_dlopen error messages;libltdl;
+77;lt_dlopen_a.at:23;lt_dlopen archive;libltdl lt_dlopen_a;
+78;lt_dlopenext.at:23;lt_dlopenext error messages;libltdl;
+79;ltdl-libdir.at:23;libdir of installed modules;libltdl;
+80;ltdl-api.at:25;ltdl API;libltdl;
+81;dlloader-api.at:23;dlloader API;libltdl;
+82;loadlibrary.at:23;loadlibrary error messages;libltdl;
+83;lalib-syntax.at:24;syntax of .la files;libtool libltdl;
+84;resident.at:27;resident modules;libltdl;
+85;slist.at:24;SList functionality;;
+86;need_lib_prefix.at:25;enforced lib prefix;libltdl libtool;
+87;standalone.at:31;compiling softlinked libltdl;libtoolize;
+88;standalone.at:46;compiling copied libltdl;libtoolize;
+89;standalone.at:61;installable libltdl;libtoolize;
+90;standalone.at:79;linking libltdl without autotools;libtoolize;
+91;subproject.at:57;compiling softlinked libltdl;libtoolize automake autoconf;
+92;subproject.at:73;compiling copied libltdl;libtoolize automake autoconf;
+93;subproject.at:89;installable libltdl;libtoolize automake autoconf;
+94;subproject.at:109;linking libltdl without autotools;libtoolize;
+95;nonrecursive.at:78;compiling softlinked libltdl;libtoolize automake autoconf;
+96;nonrecursive.at:102;compiling copied libltdl;libtoolize automake autoconf;
+97;nonrecursive.at:126;installable libltdl;libtoolize automake autoconf;
+98;recursive.at:60;compiling softlinked libltdl;libtoolize autoconf automake;
+99;recursive.at:80;compiling copied libltdl;libtoolize autoconf automake;
+100;recursive.at:100;installable libltdl;libtoolize autoconf automake;
+101;template.at:27;simple template test;cxx libtool;
+102;template.at:126;template test with subdirs;cxx libtool;
+103;ctor.at:27;C++ static constructors;cxx libtool;
+104;exceptions.at:24;C++ exception handling;libtool libltdl;
+105;early-libtool.at:32;config.status;libtoolize automake autoconf;
+106;early-libtool.at:126;config.lt;libtoolize automake autoconf;
+107;with-pic.at:24;test --with-pic;;
+108;no-executables.at:25;AC_NO_EXECUTABLES;libtoolize automake autoconf;
+109;deplibs-ident.at:32;build tree relpaths;libtool;
+110;configure-iface.at:102;installable libltdl;libltdl libtoolize automake autoconf;
+111;configure-iface.at:162;--with-ltdl-include/lib;libltdl libtoolize automake autoconf;
+112;configure-iface.at:243;--with-included-ltdl;libltdl libtoolize automake autoconf;
+113;configure-iface.at:304;convenience libltdl;libtoolize automake autoconf;
+114;stresstest.at:31;Link option thorough search test;libtool;
+115;cmdline_wrap.at:28;Run tests with low max_cmd_len;recursive;
+116;pic_flag.at:24;override pic_flag at configure time;;
+117;darwin.at:26;darwin fat compile;;
+118;darwin.at:103;darwin concurrent library extraction;;
+119;darwin.at:152;darwin gdb debug information;;
+120;darwin.at:208;darwin ld warnings changing configure results;libtoolize autoconf automake;
+121;darwin.at:232;darwin can lt_dlopen .dylib and .so files;libltdl dylib;
+122;dumpbin-symbols.at:25;dumpbin -symbols section hiding;;
+123;deplibs-mingw.at:27;deplibs without file command;libtool;
+124;sysroot.at:203;-L=.../lib -l;libtool sysroot libtoolize automake autoconf;
+125;sysroot.at:204;-L SYSROOT/.../lib -l;libtool sysroot libtoolize automake autoconf;
+126;sysroot.at:205;SYSROOT/.../*.la;libtool sysroot libtoolize automake autoconf;
+"
+# List of the all the test groups.
+at_groups_all=`$as_echo "$at_help_all" | sed 's/;.*//'`
+
+# at_fn_validate_ranges NAME...
+# -----------------------------
+# Validate and normalize the test group number contained in each variable
+# NAME. Leading zeroes are treated as decimal.
+at_fn_validate_ranges ()
+{
+  for at_grp
+  do
+    eval at_value=\$$at_grp
+    if test $at_value -lt 1 || test $at_value -gt 126; then
+      $as_echo "invalid test group: $at_value" >&2
+      exit 1
+    fi
+    case $at_value in
+      0*) # We want to treat leading 0 as decimal, like expr and test, but
+	  # AS_VAR_ARITH treats it as octal if it uses $(( )).
+	  # With XSI shells, ${at_value#${at_value%%[1-9]*}} avoids the
+	  # expr fork, but it is not worth the effort to determine if the
+	  # shell supports XSI when the user can just avoid leading 0.
+	  eval $at_grp='`expr $at_value + 0`' ;;
+    esac
+  done
+}
+
+at_prev=
+for at_option
+do
+  # If the previous option needs an argument, assign it.
+  if test -n "$at_prev"; then
+    at_option=$at_prev=$at_option
+    at_prev=
+  fi
+
+  case $at_option in
+  *=?*) at_optarg=`expr "X$at_option" : '[^=]*=\(.*\)'` ;;
+  *)    at_optarg= ;;
+  esac
+
+  # Accept the important Cygnus configure options, so we can diagnose typos.
+
+  case $at_option in
+    --help | -h )
+	at_help_p=:
+	;;
+
+    --list | -l )
+	at_list_p=:
+	;;
+
+    --version | -V )
+	at_version_p=:
+	;;
+
+    --clean | -c )
+	at_clean=:
+	;;
+
+    --color )
+	at_color=always
+	;;
+    --color=* )
+	case $at_optarg in
+	no | never | none) at_color=never ;;
+	auto | tty | if-tty) at_color=auto ;;
+	always | yes | force) at_color=always ;;
+	*) at_optname=`echo " $at_option" | sed 's/^ //; s/=.*//'`
+	   as_fn_error $? "unrecognized argument to $at_optname: $at_optarg" ;;
+	esac
+	;;
+
+    --debug | -d )
+	at_debug_p=:
+	;;
+
+    --errexit | -e )
+	at_debug_p=:
+	at_errexit_p=:
+	;;
+
+    --verbose | -v )
+	at_verbose=; at_quiet=:
+	;;
+
+    --trace | -x )
+	at_traceon='set -x'
+	at_trace_echo=echo
+	at_check_filter_trace=at_fn_filter_trace
+	;;
+
+    [0-9] | [0-9][0-9] | [0-9][0-9][0-9] | [0-9][0-9][0-9][0-9])
+	at_fn_validate_ranges at_option
+	as_fn_append at_groups "$at_option$as_nl"
+	;;
+
+    # Ranges
+    [0-9]- | [0-9][0-9]- | [0-9][0-9][0-9]- | [0-9][0-9][0-9][0-9]-)
+	at_range_start=`echo $at_option |tr -d X-`
+	at_fn_validate_ranges at_range_start
+	at_range=`$as_echo "$at_groups_all" | \
+	  sed -ne '/^'$at_range_start'$/,$p'`
+	as_fn_append at_groups "$at_range$as_nl"
+	;;
+
+    -[0-9] | -[0-9][0-9] | -[0-9][0-9][0-9] | -[0-9][0-9][0-9][0-9])
+	at_range_end=`echo $at_option |tr -d X-`
+	at_fn_validate_ranges at_range_end
+	at_range=`$as_echo "$at_groups_all" | \
+	  sed -ne '1,/^'$at_range_end'$/p'`
+	as_fn_append at_groups "$at_range$as_nl"
+	;;
+
+    [0-9]-[0-9] | [0-9]-[0-9][0-9] | [0-9]-[0-9][0-9][0-9] | \
+    [0-9]-[0-9][0-9][0-9][0-9] | [0-9][0-9]-[0-9][0-9] | \
+    [0-9][0-9]-[0-9][0-9][0-9] | [0-9][0-9]-[0-9][0-9][0-9][0-9] | \
+    [0-9][0-9][0-9]-[0-9][0-9][0-9] | \
+    [0-9][0-9][0-9]-[0-9][0-9][0-9][0-9] | \
+    [0-9][0-9][0-9][0-9]-[0-9][0-9][0-9][0-9] )
+	at_range_start=`expr $at_option : '\(.*\)-'`
+	at_range_end=`expr $at_option : '.*-\(.*\)'`
+	if test $at_range_start -gt $at_range_end; then
+	  at_tmp=$at_range_end
+	  at_range_end=$at_range_start
+	  at_range_start=$at_tmp
+	fi
+	at_fn_validate_ranges at_range_start at_range_end
+	at_range=`$as_echo "$at_groups_all" | \
+	  sed -ne '/^'$at_range_start'$/,/^'$at_range_end'$/p'`
+	as_fn_append at_groups "$at_range$as_nl"
+	;;
+
+    # Directory selection.
+    --directory | -C )
+	at_prev=--directory
+	;;
+    --directory=* )
+	at_change_dir=:
+	at_dir=$at_optarg
+	if test x- = "x$at_dir" ; then
+	  at_dir=./-
+	fi
+	;;
+
+    # Parallel execution.
+    --jobs | -j )
+	at_jobs=0
+	;;
+    --jobs=* | -j[0-9]* )
+	if test -n "$at_optarg"; then
+	  at_jobs=$at_optarg
+	else
+	  at_jobs=`expr X$at_option : 'X-j\(.*\)'`
+	fi
+	case $at_jobs in *[!0-9]*)
+	  at_optname=`echo " $at_option" | sed 's/^ //; s/[0-9=].*//'`
+	  as_fn_error $? "non-numeric argument to $at_optname: $at_jobs" ;;
+	esac
+	;;
+
+    # Keywords.
+    --keywords | -k )
+	at_prev=--keywords
+	;;
+    --keywords=* )
+	at_groups_selected=$at_help_all
+	at_save_IFS=$IFS
+	IFS=,
+	set X $at_optarg
+	shift
+	IFS=$at_save_IFS
+	for at_keyword
+	do
+	  at_invert=
+	  case $at_keyword in
+	  '!'*)
+	    at_invert="-v"
+	    at_keyword=`expr "X$at_keyword" : 'X!\(.*\)'`
+	    ;;
+	  esac
+	  # It is on purpose that we match the test group titles too.
+	  at_groups_selected=`$as_echo "$at_groups_selected" |
+	      grep -i $at_invert "^[1-9][^;]*;.*[; ]$at_keyword[ ;]"`
+	done
+	# Smash the keywords.
+	at_groups_selected=`$as_echo "$at_groups_selected" | sed 's/;.*//'`
+	as_fn_append at_groups "$at_groups_selected$as_nl"
+	;;
+    --recheck)
+	at_recheck=:
+	;;
+
+    *=*)
+	at_envvar=`expr "x$at_option" : 'x\([^=]*\)='`
+	# Reject names that are not valid shell variable names.
+	case $at_envvar in
+	  '' | [0-9]* | *[!_$as_cr_alnum]* )
+	    as_fn_error $? "invalid variable name: \`$at_envvar'" ;;
+	esac
+	at_value=`$as_echo "$at_optarg" | sed "s/'/'\\\\\\\\''/g"`
+	# Export now, but save eval for later and for debug scripts.
+	export $at_envvar
+	as_fn_append at_debug_args " $at_envvar='$at_value'"
+	;;
+
+     *) $as_echo "$as_me: invalid option: $at_option" >&2
+	$as_echo "Try \`$0 --help' for more information." >&2
+	exit 1
+	;;
+  esac
+done
+
+# Verify our last option didn't require an argument
+if test -n "$at_prev"; then :
+  as_fn_error $? "\`$at_prev' requires an argument"
+fi
+
+# The file containing the suite.
+at_suite_log=$at_dir/$as_me.log
+
+# Selected test groups.
+if test -z "$at_groups$at_recheck"; then
+  at_groups=$at_groups_all
+else
+  if test -n "$at_recheck" && test -r "$at_suite_log"; then
+    at_oldfails=`sed -n '
+      /^Failed tests:$/,/^Skipped tests:$/{
+	s/^[ ]*\([1-9][0-9]*\):.*/\1/p
+      }
+      /^Unexpected passes:$/,/^## Detailed failed tests/{
+	s/^[ ]*\([1-9][0-9]*\):.*/\1/p
+      }
+      /^## Detailed failed tests/q
+      ' "$at_suite_log"`
+    as_fn_append at_groups "$at_oldfails$as_nl"
+  fi
+  # Sort the tests, removing duplicates.
+  at_groups=`$as_echo "$at_groups" | sort -nu | sed '/^$/d'`
+fi
+
+if test x"$at_color" = xalways \
+   || { test x"$at_color" = xauto && test -t 1; }; then
+  at_red=`printf '\033[0;31m'`
+  at_grn=`printf '\033[0;32m'`
+  at_lgn=`printf '\033[1;32m'`
+  at_blu=`printf '\033[1;34m'`
+  at_std=`printf '\033[m'`
+else
+  at_red= at_grn= at_lgn= at_blu= at_std=
+fi
+
+# Help message.
+if $at_help_p; then
+  cat <<_ATEOF || at_write_fail=1
+Usage: $0 [OPTION]... [VARIABLE=VALUE]... [TESTS]
+
+Run all the tests, or the selected TESTS, given by numeric ranges, and
+save a detailed log file.  Upon failure, create debugging scripts.
+
+Do not change environment variables directly.  Instead, set them via
+command line arguments.  Set \`AUTOTEST_PATH' to select the executables
+to exercise.  Each relative directory is expanded as build and source
+directories relative to the top level of this distribution.
+E.g., from within the build directory /tmp/foo-1.0, invoking this:
+
+  $ $0 AUTOTEST_PATH=bin
+
+is equivalent to the following, assuming the source directory is /src/foo-1.0:
+
+  PATH=/tmp/foo-1.0/bin:/src/foo-1.0/bin:\$PATH $0
+_ATEOF
+cat <<_ATEOF || at_write_fail=1
+
+Operation modes:
+  -h, --help     print the help message, then exit
+  -V, --version  print version number, then exit
+  -c, --clean    remove all the files this test suite might create and exit
+  -l, --list     describes all the tests, or the selected TESTS
+_ATEOF
+cat <<_ATEOF || at_write_fail=1
+
+Execution tuning:
+  -C, --directory=DIR
+                 change to directory DIR before starting
+      --color[=never|auto|always]
+                 disable colored test results, or enable even without terminal
+  -j, --jobs[=N]
+                 Allow N jobs at once; infinite jobs with no arg (default 1)
+  -k, --keywords=KEYWORDS
+                 select the tests matching all the comma-separated KEYWORDS
+                 multiple \`-k' accumulate; prefixed \`!' negates a KEYWORD
+      --recheck  select all tests that failed or passed unexpectedly last time
+  -e, --errexit  abort as soon as a test fails; implies --debug
+  -v, --verbose  force more detailed output
+                 default for debugging scripts
+  -d, --debug    inhibit clean up and top-level logging
+                 default for debugging scripts
+  -x, --trace    enable tests shell tracing
+_ATEOF
+cat <<_ATEOF || at_write_fail=1
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU Libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>.
+_ATEOF
+  exit $at_write_fail
+fi
+
+# List of tests.
+if $at_list_p; then
+  cat <<_ATEOF || at_write_fail=1
+GNU Libtool 2.4.2 test suite test groups:
+
+ NUM: FILE-NAME:LINE     TEST-GROUP-NAME
+      KEYWORDS
+
+_ATEOF
+  # Pass an empty line as separator between selected groups and help.
+  $as_echo "$at_groups$as_nl$as_nl$at_help_all" |
+    awk 'NF == 1 && FS != ";" {
+	   selected[$ 1] = 1
+	   next
+	 }
+	 /^$/ { FS = ";" }
+	 NF > 0 {
+	   if (selected[$ 1]) {
+	     printf " %3d: %-18s %s\n", $ 1, $ 2, $ 3
+	     if ($ 4) {
+	       lmax = 79
+	       indent = "     "
+	       line = indent
+	       len = length (line)
+	       n = split ($ 4, a, " ")
+	       for (i = 1; i <= n; i++) {
+		 l = length (a[i]) + 1
+		 if (i > 1 && len + l > lmax) {
+		   print line
+		   line = indent " " a[i]
+		   len = length (line)
+		 } else {
+		   line = line " " a[i]
+		   len += l
+		 }
+	       }
+	       if (n)
+		 print line
+	     }
+	   }
+	 }' || at_write_fail=1
+  exit $at_write_fail
+fi
+if $at_version_p; then
+  $as_echo "$as_me (GNU Libtool 2.4.2)" &&
+  cat <<\_ATEOF || at_write_fail=1
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This test suite is free software; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+_ATEOF
+  exit $at_write_fail
+fi
+
+# Should we print banners?  Yes if more than one test is run.
+case $at_groups in #(
+  *$as_nl* )
+      at_print_banners=: ;; #(
+  * ) at_print_banners=false ;;
+esac
+# Text for banner N, set to a single space once printed.
+# Banner 1. getopt-m4sh.at:25
+# Category starts at test group 1.
+at_banner_text_1="Shell option parser generator."
+# Banner 2. libtoolize.at:26
+# Category starts at test group 7.
+at_banner_text_2="Libtoolize operation."
+# Banner 3. help.at:24
+# Category starts at test group 21.
+at_banner_text_3="Testing libtool functions."
+# Banner 4. destdir.at:25
+# Category starts at test group 68.
+at_banner_text_4="DESTDIR tests"
+# Banner 5. old-m4-iface.at:26
+# Category starts at test group 70.
+at_banner_text_5="Support for older m4 interface."
+# Banner 6. am-subdir.at:26
+# Category starts at test group 72.
+at_banner_text_6="Libtool subdir-objects support."
+# Banner 7. lt_dlexit.at:28
+# Category starts at test group 74.
+at_banner_text_7="Libltdl functionality."
+# Banner 8. standalone.at:25
+# Category starts at test group 87.
+at_banner_text_8="Standalone Libltdl."
+# Banner 9. subproject.at:25
+# Category starts at test group 91.
+at_banner_text_9="Subproject Libltdl."
+# Banner 10. nonrecursive.at:26
+# Category starts at test group 95.
+at_banner_text_10="Nonrecursive Automake Libltdl."
+# Banner 11. recursive.at:25
+# Category starts at test group 98.
+at_banner_text_11="Recursive Automake Libltdl."
+# Banner 12. template.at:25
+# Category starts at test group 101.
+at_banner_text_12="C++ template tests."
+# Banner 13. ctor.at:25
+# Category starts at test group 103.
+at_banner_text_13="Constructors."
+# Banner 14. early-libtool.at:25
+# Category starts at test group 105.
+at_banner_text_14="libtool script generation."
+# Banner 15. no-executables.at:24
+# Category starts at test group 108.
+at_banner_text_15="Libtool usage in GCC"
+# Banner 16. deplibs-ident.at:25
+# Category starts at test group 109.
+at_banner_text_16="Detecting identical deplibs."
+# Banner 17. configure-iface.at:25
+# Category starts at test group 110.
+at_banner_text_17="configure interface to libltdl."
+# Banner 18. stresstest.at:30
+# Category starts at test group 114.
+at_banner_text_18="Libtool stress test."
+# Banner 19. darwin.at:25
+# Category starts at test group 117.
+at_banner_text_19="Mac OS X tests"
+# Banner 20. dumpbin-symbols.at:24
+# Category starts at test group 122.
+at_banner_text_20="Windows tests."
+# Banner 21. sysroot.at:202
+# Category starts at test group 124.
+at_banner_text_21="sysroot tests"
+
+# Take any -C into account.
+if $at_change_dir ; then
+  test x != "x$at_dir" && cd "$at_dir" \
+    || as_fn_error $? "unable to change directory"
+  at_dir=`pwd`
+fi
+
+# Load the config files for any default variable assignments.
+for at_file in atconfig atlocal
+do
+  test -r $at_file || continue
+  . ./$at_file || as_fn_error $? "invalid content: $at_file"
+done
+
+# Autoconf <=2.59b set at_top_builddir instead of at_top_build_prefix:
+: "${at_top_build_prefix=$at_top_builddir}"
+
+# Perform any assignments requested during argument parsing.
+eval "$at_debug_args"
+
+# atconfig delivers names relative to the directory the test suite is
+# in, but the groups themselves are run in testsuite-dir/group-dir.
+if test -n "$at_top_srcdir"; then
+  builddir=../..
+  for at_dir_var in srcdir top_srcdir top_build_prefix
+  do
+    eval at_val=\$at_$at_dir_var
+    case $at_val in
+      [\\/$]* | ?:[\\/]* ) at_prefix= ;;
+      *) at_prefix=../../ ;;
+    esac
+    eval "$at_dir_var=\$at_prefix\$at_val"
+  done
+fi
+
+## -------------------- ##
+## Directory structure. ##
+## -------------------- ##
+
+# This is the set of directories and files used by this script
+# (non-literals are capitalized):
+#
+# TESTSUITE         - the testsuite
+# TESTSUITE.log     - summarizes the complete testsuite run
+# TESTSUITE.dir/    - created during a run, remains after -d or failed test
+# + at-groups/      - during a run: status of all groups in run
+# | + NNN/          - during a run: meta-data about test group NNN
+# | | + check-line  - location (source file and line) of current AT_CHECK
+# | | + status      - exit status of current AT_CHECK
+# | | + stdout      - stdout of current AT_CHECK
+# | | + stder1      - stderr, including trace
+# | | + stderr      - stderr, with trace filtered out
+# | | + test-source - portion of testsuite that defines group
+# | | + times       - timestamps for computing duration
+# | | + pass        - created if group passed
+# | | + xpass       - created if group xpassed
+# | | + fail        - created if group failed
+# | | + xfail       - created if group xfailed
+# | | + skip        - created if group skipped
+# + at-stop         - during a run: end the run if this file exists
+# + at-source-lines - during a run: cache of TESTSUITE line numbers for extraction
+# + 0..NNN/         - created for each group NNN, remains after -d or failed test
+# | + TESTSUITE.log - summarizes the group results
+# | + ...           - files created during the group
+
+# The directory the whole suite works in.
+# Should be absolute to let the user `cd' at will.
+at_suite_dir=$at_dir/$as_me.dir
+# The file containing the suite ($at_dir might have changed since earlier).
+at_suite_log=$at_dir/$as_me.log
+# The directory containing helper files per test group.
+at_helper_dir=$at_suite_dir/at-groups
+# Stop file: if it exists, do not start new jobs.
+at_stop_file=$at_suite_dir/at-stop
+# The fifo used for the job dispatcher.
+at_job_fifo=$at_suite_dir/at-job-fifo
+
+if $at_clean; then
+  test -d "$at_suite_dir" &&
+    find "$at_suite_dir" -type d ! -perm -700 -exec chmod u+rwx \{\} \;
+  rm -f -r "$at_suite_dir" "$at_suite_log"
+  exit $?
+fi
+
+# Don't take risks: use only absolute directories in PATH.
+#
+# For stand-alone test suites (ie. atconfig was not found),
+# AUTOTEST_PATH is relative to `.'.
+#
+# For embedded test suites, AUTOTEST_PATH is relative to the top level
+# of the package.  Then expand it into build/src parts, since users
+# may create executables in both places.
+AUTOTEST_PATH=`$as_echo "$AUTOTEST_PATH" | sed "s|:|$PATH_SEPARATOR|g"`
+at_path=
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $AUTOTEST_PATH $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -n "$at_path" && as_fn_append at_path $PATH_SEPARATOR
+case $as_dir in
+  [\\/]* | ?:[\\/]* )
+    as_fn_append at_path "$as_dir"
+    ;;
+  * )
+    if test -z "$at_top_build_prefix"; then
+      # Stand-alone test suite.
+      as_fn_append at_path "$as_dir"
+    else
+      # Embedded test suite.
+      as_fn_append at_path "$at_top_build_prefix$as_dir$PATH_SEPARATOR"
+      as_fn_append at_path "$at_top_srcdir/$as_dir"
+    fi
+    ;;
+esac
+  done
+IFS=$as_save_IFS
+
+
+# Now build and simplify PATH.
+#
+# There might be directories that don't exist, but don't redirect
+# builtins' (eg., cd) stderr directly: Ultrix's sh hates that.
+at_new_path=
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $at_path
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -d "$as_dir" || continue
+case $as_dir in
+  [\\/]* | ?:[\\/]* ) ;;
+  * ) as_dir=`(cd "$as_dir" && pwd) 2>/dev/null` ;;
+esac
+case $PATH_SEPARATOR$at_new_path$PATH_SEPARATOR in
+  *$PATH_SEPARATOR$as_dir$PATH_SEPARATOR*) ;;
+  $PATH_SEPARATOR$PATH_SEPARATOR) at_new_path=$as_dir ;;
+  *) as_fn_append at_new_path "$PATH_SEPARATOR$as_dir" ;;
+esac
+  done
+IFS=$as_save_IFS
+
+PATH=$at_new_path
+export PATH
+
+# Setting up the FDs.
+
+
+
+# 5 is the log file.  Not to be overwritten if `-d'.
+if $at_debug_p; then
+  at_suite_log=/dev/null
+else
+  : >"$at_suite_log"
+fi
+exec 5>>"$at_suite_log"
+
+# Banners and logs.
+$as_echo "## ----------------------------- ##
+## GNU Libtool 2.4.2 test suite. ##
+## ----------------------------- ##"
+{
+  $as_echo "## ----------------------------- ##
+## GNU Libtool 2.4.2 test suite. ##
+## ----------------------------- ##"
+  echo
+
+  $as_echo "$as_me: command line was:"
+  $as_echo "  \$ $0 $at_cli_args"
+  echo
+
+  # If ChangeLog exists, list a few lines in case it might help determining
+  # the exact version.
+  if test -n "$at_top_srcdir" && test -f "$at_top_srcdir/ChangeLog"; then
+    $as_echo "## ---------- ##
+## ChangeLog. ##
+## ---------- ##"
+    echo
+    sed 's/^/| /;10q' "$at_top_srcdir/ChangeLog"
+    echo
+  fi
+
+  {
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
+
+}
+  echo
+
+  # Contents of the config files.
+  for at_file in atconfig atlocal
+  do
+    test -r $at_file || continue
+    $as_echo "$as_me: $at_file:"
+    sed 's/^/| /' $at_file
+    echo
+  done
+} >&5
+
+: ${tst_dist=dist}
+: ${ACLOCAL=aclocal}
+: ${AUTOHEADER=autoheader}
+: ${AUTOCONF=autoconf}
+: ${AUTOMAKE=automake}
+: ${AUTORECONF=autoreconf}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO=$as_echo}
+for tool in ACLOCAL AUTOHEADER AUTOCONF AUTOMAKE AUTORECONF; do
+  if eval \$$tool --version >/dev/null 2>&1; then :; else eval $tool=no; fi
+done
+export ACLOCAL AUTOHEADER AUTOCONF AUTOMAKE AUTORECONF
+eval `$LIBTOOL --config | grep '^EGREP='`
+eval `$LIBTOOL --config | $EGREP '^(host|host_os|host_alias|build|build_alias|to_host_file_cmd|to_tool_file_cmd)='`
+configure_options=--prefix=/nonexistent
+if test -n "$host_alias"; then
+  configure_options="$configure_options --host $host_alias"
+fi
+if test -n "$build_alias"; then
+  configure_options="$configure_options --build $build_alias"
+fi
+if test -n "$to_host_file_cmd"; then
+  configure_options="$configure_options lt_cv_to_host_file_cmd=$to_host_file_cmd"
+fi
+if test -n "$to_tool_file_cmd"; then
+  configure_options="$configure_options lt_cv_to_tool_file_cmd=$to_tool_file_cmd"
+fi
+if (FOO=bar; unset FOO) >/dev/null 2>&1; then
+  unset=unset
+else
+  unset=false
+fi
+: ${mkdir_p="$abs_top_srcdir/libltdl/config/install-sh -d"}
+# Fix relative paths in $lt_INSTALL
+case $lt_INSTALL in
+  *libltdl/config/install-sh*)
+    lt_INSTALL=$abs_top_srcdir/libltdl/config/install-sh
+    ;;
+esac
+
+# Unset some MAKE... variables that may cause $MAKE to act like a
+# recursively invoked sub-make.  Any $MAKE invocation in a test is
+# conceptually an independent invocation.
+unset MFLAGS MAKEFLAGS MAKELEVEL __MKLVL__ MAKE_JOBS_FIFO
+
+# On AIX, shared libraries remain loaded in memory after use if they
+# are world-readable, until root issues slibclean.  On NFS, this causes
+# a testsuite rerun to fail to clean up test group directories.  Avoid
+# this with a suitable umask.  Do not do this on other systems, for
+# example HP-UX suffers unless shared libraries are mode 555.
+case $host_os in
+aix*) umask o-rwx ;;
+esac
+
+## ------------------------- ##
+## Autotest shell functions. ##
+## ------------------------- ##
+
+# at_fn_banner NUMBER
+# -------------------
+# Output banner NUMBER, provided the testsuite is running multiple groups and
+# this particular banner has not yet been printed.
+at_fn_banner ()
+{
+  $at_print_banners || return 0
+  eval at_banner_text=\$at_banner_text_$1
+  test "x$at_banner_text" = "x " && return 0
+  eval "at_banner_text_$1=\" \""
+  if test -z "$at_banner_text"; then
+    $at_first || echo
+  else
+    $as_echo "$as_nl$at_banner_text$as_nl"
+  fi
+} # at_fn_banner
+
+# at_fn_check_prepare_notrace REASON LINE
+# ---------------------------------------
+# Perform AT_CHECK preparations for the command at LINE for an untraceable
+# command; REASON is the reason for disabling tracing.
+at_fn_check_prepare_notrace ()
+{
+  $at_trace_echo "Not enabling shell tracing (command contains $1)"
+  $as_echo "$2" >"$at_check_line_file"
+  at_check_trace=: at_check_filter=:
+  : >"$at_stdout"; : >"$at_stderr"
+}
+
+# at_fn_check_prepare_trace LINE
+# ------------------------------
+# Perform AT_CHECK preparations for the command at LINE for a traceable
+# command.
+at_fn_check_prepare_trace ()
+{
+  $as_echo "$1" >"$at_check_line_file"
+  at_check_trace=$at_traceon at_check_filter=$at_check_filter_trace
+  : >"$at_stdout"; : >"$at_stderr"
+}
+
+# at_fn_check_prepare_dynamic COMMAND LINE
+# ----------------------------------------
+# Decide if COMMAND at LINE is traceable at runtime, and call the appropriate
+# preparation function.
+at_fn_check_prepare_dynamic ()
+{
+  case $1 in
+    *$as_nl*)
+      at_fn_check_prepare_notrace 'an embedded newline' "$2" ;;
+    *)
+      at_fn_check_prepare_trace "$2" ;;
+  esac
+}
+
+# at_fn_filter_trace
+# ------------------
+# Remove the lines in the file "$at_stderr" generated by "set -x" and print
+# them to stderr.
+at_fn_filter_trace ()
+{
+  mv "$at_stderr" "$at_stder1"
+  grep '^ *+' "$at_stder1" >&2
+  grep -v '^ *+' "$at_stder1" >"$at_stderr"
+}
+
+# at_fn_log_failure FILE-LIST
+# ---------------------------
+# Copy the files in the list on stdout with a "> " prefix, and exit the shell
+# with a failure exit code.
+at_fn_log_failure ()
+{
+  for file
+    do $as_echo "$file:"; sed 's/^/> /' "$file"; done
+  echo 1 > "$at_status_file"
+  exit 1
+}
+
+# at_fn_check_skip EXIT-CODE LINE
+# -------------------------------
+# Check whether EXIT-CODE is a special exit code (77 or 99), and if so exit
+# the test group subshell with that same exit code. Use LINE in any report
+# about test failure.
+at_fn_check_skip ()
+{
+  case $1 in
+    99) echo 99 > "$at_status_file"; at_failed=:
+	$as_echo "$2: hard failure"; exit 99;;
+    77) echo 77 > "$at_status_file"; exit 77;;
+  esac
+}
+
+# at_fn_check_status EXPECTED EXIT-CODE LINE
+# ------------------------------------------
+# Check whether EXIT-CODE is the EXPECTED exit code, and if so do nothing.
+# Otherwise, if it is 77 or 99, exit the test group subshell with that same
+# exit code; if it is anything else print an error message referring to LINE,
+# and fail the test.
+at_fn_check_status ()
+{
+  case $2 in
+    $1 ) ;;
+    77) echo 77 > "$at_status_file"; exit 77;;
+    99) echo 99 > "$at_status_file"; at_failed=:
+	$as_echo "$3: hard failure"; exit 99;;
+    *) $as_echo "$3: exit code was $2, expected $1"
+      at_failed=:;;
+  esac
+}
+
+# at_fn_diff_devnull FILE
+# -----------------------
+# Emit a diff between /dev/null and FILE. Uses "test -s" to avoid useless diff
+# invocations.
+at_fn_diff_devnull ()
+{
+  test -s "$1" || return 0
+  $at_diff "$at_devnull" "$1"
+}
+
+# at_fn_test NUMBER
+# -----------------
+# Parse out test NUMBER from the tail of this file.
+at_fn_test ()
+{
+  eval at_sed=\$at_sed$1
+  sed "$at_sed" "$at_myself" > "$at_test_source"
+}
+
+# at_fn_create_debugging_script
+# -----------------------------
+# Create the debugging script $at_group_dir/run which will reproduce the
+# current test group.
+at_fn_create_debugging_script ()
+{
+  {
+    echo "#! /bin/sh" &&
+    echo 'test "${ZSH_VERSION+set}" = set && alias -g '\''${1+"$@"}'\''='\''"$@"'\''' &&
+    $as_echo "cd '$at_dir'" &&
+    $as_echo "exec \${CONFIG_SHELL-$SHELL} \"$at_myself\" -v -d $at_debug_args $at_group \${1+\"\$@\"}" &&
+    echo 'exit 1'
+  } >"$at_group_dir/run" &&
+  chmod +x "$at_group_dir/run"
+}
+
+## -------------------------------- ##
+## End of autotest shell functions. ##
+## -------------------------------- ##
+{
+  $as_echo "## ---------------- ##
+## Tested programs. ##
+## ---------------- ##"
+  echo
+} >&5
+
+# Report what programs are being tested.
+for at_program in : $at_tested
+do
+  test "$at_program" = : && continue
+  case $at_program in
+    [\\/]* | ?:[\\/]* ) $at_program_=$at_program ;;
+    * )
+    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -f "$as_dir/$at_program" && break
+  done
+IFS=$as_save_IFS
+
+    at_program_=$as_dir/$at_program ;;
+  esac
+  if test -f "$at_program_"; then
+    {
+      $as_echo "$at_srcdir/testsuite.at:461: $at_program_ --version"
+      "$at_program_" --version </dev/null
+      echo
+    } >&5 2>&1
+  else
+    as_fn_error $? "cannot find $at_program" "$LINENO" 5
+  fi
+done
+
+{
+  $as_echo "## ------------------ ##
+## Running the tests. ##
+## ------------------ ##"
+} >&5
+
+at_start_date=`date`
+at_start_time=`date +%s 2>/dev/null`
+$as_echo "$as_me: starting at: $at_start_date" >&5
+
+# Create the master directory if it doesn't already exist.
+as_dir="$at_suite_dir"; as_fn_mkdir_p ||
+  as_fn_error $? "cannot create \`$at_suite_dir'" "$LINENO" 5
+
+# Can we diff with `/dev/null'?  DU 5.0 refuses.
+if diff /dev/null /dev/null >/dev/null 2>&1; then
+  at_devnull=/dev/null
+else
+  at_devnull=$at_suite_dir/devnull
+  >"$at_devnull"
+fi
+
+# Use `diff -u' when possible.
+if at_diff=`diff -u "$at_devnull" "$at_devnull" 2>&1` && test -z "$at_diff"
+then
+  at_diff='diff -u'
+else
+  at_diff=diff
+fi
+
+# Get the last needed group.
+for at_group in : $at_groups; do :; done
+
+# Extract the start and end lines of each test group at the tail
+# of this file
+awk '
+BEGIN { FS="" }
+/^#AT_START_/ {
+  start = NR
+}
+/^#AT_STOP_/ {
+  test = substr ($ 0, 10)
+  print "at_sed" test "=\"1," start "d;" (NR-1) "q\""
+  if (test == "'"$at_group"'") exit
+}' "$at_myself" > "$at_suite_dir/at-source-lines" &&
+. "$at_suite_dir/at-source-lines" ||
+  as_fn_error $? "cannot create test line number cache" "$LINENO" 5
+rm -f "$at_suite_dir/at-source-lines"
+
+# Set number of jobs for `-j'; avoid more jobs than test groups.
+set X $at_groups; shift; at_max_jobs=$#
+if test $at_max_jobs -eq 0; then
+  at_jobs=1
+fi
+if test $at_jobs -ne 1 &&
+   { test $at_jobs -eq 0 || test $at_jobs -gt $at_max_jobs; }; then
+  at_jobs=$at_max_jobs
+fi
+
+# If parallel mode, don't output banners, don't split summary lines.
+if test $at_jobs -ne 1; then
+  at_print_banners=false
+  at_quiet=:
+fi
+
+# Set up helper dirs.
+rm -rf "$at_helper_dir" &&
+mkdir "$at_helper_dir" &&
+cd "$at_helper_dir" &&
+{ test -z "$at_groups" || mkdir $at_groups; } ||
+as_fn_error $? "testsuite directory setup failed" "$LINENO" 5
+
+# Functions for running a test group.  We leave the actual
+# test group execution outside of a shell function in order
+# to avoid hitting zsh 4.x exit status bugs.
+
+# at_fn_group_prepare
+# -------------------
+# Prepare for running a test group.
+at_fn_group_prepare ()
+{
+  # The directory for additional per-group helper files.
+  at_job_dir=$at_helper_dir/$at_group
+  # The file containing the location of the last AT_CHECK.
+  at_check_line_file=$at_job_dir/check-line
+  # The file containing the exit status of the last command.
+  at_status_file=$at_job_dir/status
+  # The files containing the output of the tested commands.
+  at_stdout=$at_job_dir/stdout
+  at_stder1=$at_job_dir/stder1
+  at_stderr=$at_job_dir/stderr
+  # The file containing the code for a test group.
+  at_test_source=$at_job_dir/test-source
+  # The file containing dates.
+  at_times_file=$at_job_dir/times
+
+  # Be sure to come back to the top test directory.
+  cd "$at_suite_dir"
+
+  # Clearly separate the test groups when verbose.
+  $at_first || $at_verbose echo
+
+  at_group_normalized=$at_group
+
+  eval 'while :; do
+    case $at_group_normalized in #(
+    '"$at_format"'*) break;;
+    esac
+    at_group_normalized=0$at_group_normalized
+  done'
+
+
+  # Create a fresh directory for the next test group, and enter.
+  # If one already exists, the user may have invoked ./run from
+  # within that directory; we remove the contents, but not the
+  # directory itself, so that we aren't pulling the rug out from
+  # under the shell's notion of the current directory.
+  at_group_dir=$at_suite_dir/$at_group_normalized
+  at_group_log=$at_group_dir/$as_me.log
+  if test -d "$at_group_dir"; then
+  find "$at_group_dir" -type d ! -perm -700 -exec chmod u+rwx {} \;
+  rm -fr "$at_group_dir"/* "$at_group_dir"/.[!.] "$at_group_dir"/.??*
+fi ||
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: test directory for $at_group_normalized could not be cleaned" >&5
+$as_echo "$as_me: WARNING: test directory for $at_group_normalized could not be cleaned" >&2;}
+  # Be tolerant if the above `rm' was not able to remove the directory.
+  as_dir="$at_group_dir"; as_fn_mkdir_p
+
+  echo 0 > "$at_status_file"
+
+  # In verbose mode, append to the log file *and* show on
+  # the standard output; in quiet mode only write to the log.
+  if test -z "$at_verbose"; then
+    at_tee_pipe='tee -a "$at_group_log"'
+  else
+    at_tee_pipe='cat >> "$at_group_log"'
+  fi
+}
+
+# at_fn_group_banner ORDINAL LINE DESC PAD [BANNER]
+# -------------------------------------------------
+# Declare the test group ORDINAL, located at LINE with group description DESC,
+# and residing under BANNER. Use PAD to align the status column.
+at_fn_group_banner ()
+{
+  at_setup_line="$2"
+  test -n "$5" && at_fn_banner $5
+  at_desc="$3"
+  case $1 in
+    [0-9])      at_desc_line="  $1: ";;
+    [0-9][0-9]) at_desc_line=" $1: " ;;
+    *)          at_desc_line="$1: "  ;;
+  esac
+  as_fn_append at_desc_line "$3$4"
+  $at_quiet $as_echo_n "$at_desc_line"
+  echo "#                             -*- compilation -*-" >> "$at_group_log"
+}
+
+# at_fn_group_postprocess
+# -----------------------
+# Perform cleanup after running a test group.
+at_fn_group_postprocess ()
+{
+  # Be sure to come back to the suite directory, in particular
+  # since below we might `rm' the group directory we are in currently.
+  cd "$at_suite_dir"
+
+  if test ! -f "$at_check_line_file"; then
+    sed "s/^ */$as_me: WARNING: /" <<_ATEOF
+      A failure happened in a test group before any test could be
+      run. This means that test suite is improperly designed.  Please
+      report this failure to <bug-libtool@gnu.org>.
+_ATEOF
+    $as_echo "$at_setup_line" >"$at_check_line_file"
+    at_status=99
+  fi
+  $at_verbose $as_echo_n "$at_group. $at_setup_line: "
+  $as_echo_n "$at_group. $at_setup_line: " >> "$at_group_log"
+  case $at_xfail:$at_status in
+    yes:0)
+	at_msg="UNEXPECTED PASS"
+	at_res=xpass
+	at_errexit=$at_errexit_p
+	at_color=$at_red
+	;;
+    no:0)
+	at_msg="ok"
+	at_res=pass
+	at_errexit=false
+	at_color=$at_grn
+	;;
+    *:77)
+	at_msg='skipped ('`cat "$at_check_line_file"`')'
+	at_res=skip
+	at_errexit=false
+	at_color=$at_blu
+	;;
+    no:* | *:99)
+	at_msg='FAILED ('`cat "$at_check_line_file"`')'
+	at_res=fail
+	at_errexit=$at_errexit_p
+	at_color=$at_red
+	;;
+    yes:*)
+	at_msg='expected failure ('`cat "$at_check_line_file"`')'
+	at_res=xfail
+	at_errexit=false
+	at_color=$at_lgn
+	;;
+  esac
+  echo "$at_res" > "$at_job_dir/$at_res"
+  # In parallel mode, output the summary line only afterwards.
+  if test $at_jobs -ne 1 && test -n "$at_verbose"; then
+    $as_echo "$at_desc_line $at_color$at_msg$at_std"
+  else
+    # Make sure there is a separator even with long titles.
+    $as_echo " $at_color$at_msg$at_std"
+  fi
+  at_log_msg="$at_group. $at_desc ($at_setup_line): $at_msg"
+  case $at_status in
+    0|77)
+      # $at_times_file is only available if the group succeeded.
+      # We're not including the group log, so the success message
+      # is written in the global log separately.  But we also
+      # write to the group log in case they're using -d.
+      if test -f "$at_times_file"; then
+	at_log_msg="$at_log_msg     ("`sed 1d "$at_times_file"`')'
+	rm -f "$at_times_file"
+      fi
+      $as_echo "$at_log_msg" >> "$at_group_log"
+      $as_echo "$at_log_msg" >&5
+
+      # Cleanup the group directory, unless the user wants the files
+      # or the success was unexpected.
+      if $at_debug_p || test $at_res = xpass; then
+	at_fn_create_debugging_script
+	if test $at_res = xpass && $at_errexit; then
+	  echo stop > "$at_stop_file"
+	fi
+      else
+	if test -d "$at_group_dir"; then
+	  find "$at_group_dir" -type d ! -perm -700 -exec chmod u+rwx \{\} \;
+	  rm -fr "$at_group_dir"
+	fi
+	rm -f "$at_test_source"
+      fi
+      ;;
+    *)
+      # Upon failure, include the log into the testsuite's global
+      # log.  The failure message is written in the group log.  It
+      # is later included in the global log.
+      $as_echo "$at_log_msg" >> "$at_group_log"
+
+      # Upon failure, keep the group directory for autopsy, and create
+      # the debugging script.  With -e, do not start any further tests.
+      at_fn_create_debugging_script
+      if $at_errexit; then
+	echo stop > "$at_stop_file"
+      fi
+      ;;
+  esac
+}
+
+
+## ------------ ##
+## Driver loop. ##
+## ------------ ##
+
+
+if (set -m && set +m && set +b) >/dev/null 2>&1; then
+  set +b
+  at_job_control_on='set -m' at_job_control_off='set +m' at_job_group=-
+else
+  at_job_control_on=: at_job_control_off=: at_job_group=
+fi
+
+for at_signal in 1 2 15; do
+  trap 'set +x; set +e
+	$at_job_control_off
+	at_signal='"$at_signal"'
+	echo stop > "$at_stop_file"
+	trap "" $at_signal
+	at_pgids=
+	for at_pgid in `jobs -p 2>/dev/null`; do
+	  at_pgids="$at_pgids $at_job_group$at_pgid"
+	done
+	test -z "$at_pgids" || kill -$at_signal $at_pgids 2>/dev/null
+	wait
+	if test "$at_jobs" -eq 1 || test -z "$at_verbose"; then
+	  echo >&2
+	fi
+	at_signame=`kill -l $at_signal 2>&1 || echo $at_signal`
+	set x $at_signame
+	test 0 -gt 2 && at_signame=$at_signal
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: caught signal $at_signame, bailing out" >&5
+$as_echo "$as_me: WARNING: caught signal $at_signame, bailing out" >&2;}
+	as_fn_arith 128 + $at_signal && exit_status=$as_val
+	as_fn_exit $exit_status' $at_signal
+done
+
+rm -f "$at_stop_file"
+at_first=:
+
+if test $at_jobs -ne 1 &&
+     rm -f "$at_job_fifo" &&
+     test -n "$at_job_group" &&
+     ( mkfifo "$at_job_fifo" && trap 'exit 1' PIPE STOP TSTP ) 2>/dev/null
+then
+  # FIFO job dispatcher.
+
+  trap 'at_pids=
+	for at_pid in `jobs -p`; do
+	  at_pids="$at_pids $at_job_group$at_pid"
+	done
+	if test -n "$at_pids"; then
+	  at_sig=TSTP
+	  test "${TMOUT+set}" = set && at_sig=STOP
+	  kill -$at_sig $at_pids 2>/dev/null
+	fi
+	kill -STOP $$
+	test -z "$at_pids" || kill -CONT $at_pids 2>/dev/null' TSTP
+
+  echo
+  # Turn jobs into a list of numbers, starting from 1.
+  at_joblist=`$as_echo "$at_groups" | sed -n 1,${at_jobs}p`
+
+  set X $at_joblist
+  shift
+  for at_group in $at_groups; do
+    $at_job_control_on 2>/dev/null
+    (
+      # Start one test group.
+      $at_job_control_off
+      if $at_first; then
+	exec 7>"$at_job_fifo"
+      else
+	exec 6<&-
+      fi
+      trap 'set +x; set +e
+	    trap "" PIPE
+	    echo stop > "$at_stop_file"
+	    echo >&7
+	    as_fn_exit 141' PIPE
+      at_fn_group_prepare
+      if cd "$at_group_dir" &&
+	 at_fn_test $at_group &&
+	 . "$at_test_source"
+      then :; else
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unable to parse test group: $at_group" >&5
+$as_echo "$as_me: WARNING: unable to parse test group: $at_group" >&2;}
+	at_failed=:
+      fi
+      at_fn_group_postprocess
+      echo >&7
+    ) &
+    $at_job_control_off
+    if $at_first; then
+      at_first=false
+      exec 6<"$at_job_fifo" 7>"$at_job_fifo"
+    fi
+    shift # Consume one token.
+    if test $# -gt 0; then :; else
+      read at_token <&6 || break
+      set x $*
+    fi
+    test -f "$at_stop_file" && break
+  done
+  exec 7>&-
+  # Read back the remaining ($at_jobs - 1) tokens.
+  set X $at_joblist
+  shift
+  if test $# -gt 0; then
+    shift
+    for at_job
+    do
+      read at_token
+    done <&6
+  fi
+  exec 6<&-
+  wait
+else
+  # Run serially, avoid forks and other potential surprises.
+  for at_group in $at_groups; do
+    at_fn_group_prepare
+    if cd "$at_group_dir" &&
+       at_fn_test $at_group &&
+       . "$at_test_source"; then :; else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unable to parse test group: $at_group" >&5
+$as_echo "$as_me: WARNING: unable to parse test group: $at_group" >&2;}
+      at_failed=:
+    fi
+    at_fn_group_postprocess
+    test -f "$at_stop_file" && break
+    at_first=false
+  done
+fi
+
+# Wrap up the test suite with summary statistics.
+cd "$at_helper_dir"
+
+# Use ?..???? when the list must remain sorted, the faster * otherwise.
+at_pass_list=`for f in */pass; do echo $f; done | sed '/\*/d; s,/pass,,'`
+at_skip_list=`for f in */skip; do echo $f; done | sed '/\*/d; s,/skip,,'`
+at_xfail_list=`for f in */xfail; do echo $f; done | sed '/\*/d; s,/xfail,,'`
+at_xpass_list=`for f in ?/xpass ??/xpass ???/xpass ????/xpass; do
+		 echo $f; done | sed '/?/d; s,/xpass,,'`
+at_fail_list=`for f in ?/fail ??/fail ???/fail ????/fail; do
+		echo $f; done | sed '/?/d; s,/fail,,'`
+
+set X $at_pass_list $at_xpass_list $at_xfail_list $at_fail_list $at_skip_list
+shift; at_group_count=$#
+set X $at_xpass_list; shift; at_xpass_count=$#; at_xpass_list=$*
+set X $at_xfail_list; shift; at_xfail_count=$#
+set X $at_fail_list; shift; at_fail_count=$#; at_fail_list=$*
+set X $at_skip_list; shift; at_skip_count=$#
+
+as_fn_arith $at_group_count - $at_skip_count && at_run_count=$as_val
+as_fn_arith $at_xpass_count + $at_fail_count && at_unexpected_count=$as_val
+as_fn_arith $at_xfail_count + $at_fail_count && at_total_fail_count=$as_val
+
+# Back to the top directory.
+cd "$at_dir"
+rm -rf "$at_helper_dir"
+
+# Compute the duration of the suite.
+at_stop_date=`date`
+at_stop_time=`date +%s 2>/dev/null`
+$as_echo "$as_me: ending at: $at_stop_date" >&5
+case $at_start_time,$at_stop_time in
+  [0-9]*,[0-9]*)
+    as_fn_arith $at_stop_time - $at_start_time && at_duration_s=$as_val
+    as_fn_arith $at_duration_s / 60 && at_duration_m=$as_val
+    as_fn_arith $at_duration_m / 60 && at_duration_h=$as_val
+    as_fn_arith $at_duration_s % 60 && at_duration_s=$as_val
+    as_fn_arith $at_duration_m % 60 && at_duration_m=$as_val
+    at_duration="${at_duration_h}h ${at_duration_m}m ${at_duration_s}s"
+    $as_echo "$as_me: test suite duration: $at_duration" >&5
+    ;;
+esac
+
+echo
+$as_echo "## ------------- ##
+## Test results. ##
+## ------------- ##"
+echo
+{
+  echo
+  $as_echo "## ------------- ##
+## Test results. ##
+## ------------- ##"
+  echo
+} >&5
+
+if test $at_run_count = 1; then
+  at_result="1 test"
+  at_were=was
+else
+  at_result="$at_run_count tests"
+  at_were=were
+fi
+if $at_errexit_p && test $at_unexpected_count != 0; then
+  if test $at_xpass_count = 1; then
+    at_result="$at_result $at_were run, one passed"
+  else
+    at_result="$at_result $at_were run, one failed"
+  fi
+  at_result="$at_result unexpectedly and inhibited subsequent tests."
+  at_color=$at_red
+else
+  # Don't you just love exponential explosion of the number of cases?
+  at_color=$at_red
+  case $at_xpass_count:$at_fail_count:$at_xfail_count in
+    # So far, so good.
+    0:0:0) at_result="$at_result $at_were successful." at_color=$at_grn ;;
+    0:0:*) at_result="$at_result behaved as expected." at_color=$at_lgn ;;
+
+    # Some unexpected failures
+    0:*:0) at_result="$at_result $at_were run,
+$at_fail_count failed unexpectedly." ;;
+
+    # Some failures, both expected and unexpected
+    0:*:1) at_result="$at_result $at_were run,
+$at_total_fail_count failed ($at_xfail_count expected failure)." ;;
+    0:*:*) at_result="$at_result $at_were run,
+$at_total_fail_count failed ($at_xfail_count expected failures)." ;;
+
+    # No unexpected failures, but some xpasses
+    *:0:*) at_result="$at_result $at_were run,
+$at_xpass_count passed unexpectedly." ;;
+
+    # No expected failures, but failures and xpasses
+    *:1:0) at_result="$at_result $at_were run,
+$at_unexpected_count did not behave as expected ($at_fail_count unexpected failure)." ;;
+    *:*:0) at_result="$at_result $at_were run,
+$at_unexpected_count did not behave as expected ($at_fail_count unexpected failures)." ;;
+
+    # All of them.
+    *:*:1) at_result="$at_result $at_were run,
+$at_xpass_count passed unexpectedly,
+$at_total_fail_count failed ($at_xfail_count expected failure)." ;;
+    *:*:*) at_result="$at_result $at_were run,
+$at_xpass_count passed unexpectedly,
+$at_total_fail_count failed ($at_xfail_count expected failures)." ;;
+  esac
+
+  if test $at_skip_count = 0 && test $at_run_count -gt 1; then
+    at_result="All $at_result"
+  fi
+fi
+
+# Now put skips in the mix.
+case $at_skip_count in
+  0) ;;
+  1) at_result="$at_result
+1 test was skipped." ;;
+  *) at_result="$at_result
+$at_skip_count tests were skipped." ;;
+esac
+
+if test $at_unexpected_count = 0; then
+  echo "$at_color$at_result$at_std"
+  echo "$at_result" >&5
+else
+  echo "${at_color}ERROR: $at_result$at_std" >&2
+  echo "ERROR: $at_result" >&5
+  {
+    echo
+    $as_echo "## ------------------------ ##
+## Summary of the failures. ##
+## ------------------------ ##"
+
+    # Summary of failed and skipped tests.
+    if test $at_fail_count != 0; then
+      echo "Failed tests:"
+      $SHELL "$at_myself" $at_fail_list --list
+      echo
+    fi
+    if test $at_skip_count != 0; then
+      echo "Skipped tests:"
+      $SHELL "$at_myself" $at_skip_list --list
+      echo
+    fi
+    if test $at_xpass_count != 0; then
+      echo "Unexpected passes:"
+      $SHELL "$at_myself" $at_xpass_list --list
+      echo
+    fi
+    if test $at_fail_count != 0; then
+      $as_echo "## ---------------------- ##
+## Detailed failed tests. ##
+## ---------------------- ##"
+      echo
+      for at_group in $at_fail_list
+      do
+	at_group_normalized=$at_group
+
+  eval 'while :; do
+    case $at_group_normalized in #(
+    '"$at_format"'*) break;;
+    esac
+    at_group_normalized=0$at_group_normalized
+  done'
+
+	cat "$at_suite_dir/$at_group_normalized/$as_me.log"
+	echo
+      done
+      echo
+    fi
+    if test -n "$at_top_srcdir"; then
+      sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## ${at_top_build_prefix}config.log ##
+_ASBOX
+      sed 's/^/| /' ${at_top_build_prefix}config.log
+      echo
+    fi
+  } >&5
+
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## $as_me.log was created. ##
+_ASBOX
+
+  echo
+  if $at_debug_p; then
+    at_msg='per-test log files'
+  else
+    at_msg="\`${at_testdir+${at_testdir}/}$as_me.log'"
+  fi
+  $as_echo "Please send $at_msg and all information you think might help:
+
+   To: <bug-libtool@gnu.org>
+   Subject: [GNU Libtool 2.4.2] $as_me: $at_fail_list${at_fail_list:+ failed${at_xpass_list:+, }}$at_xpass_list${at_xpass_list:+ passed unexpectedly}
+
+You may investigate any problem if you feel able to do so, in which
+case the test suite provides a good starting point.  Its output may
+be found below \`${at_testdir+${at_testdir}/}$as_me.dir'.
+"
+  exit 1
+fi
+
+exit 0
+
+## ------------- ##
+## Actual tests. ##
+## ------------- ##
+#AT_START_1
+at_fn_group_banner 1 'getopt-m4sh.at:85' \
+  "short option splitting" "                         " 1
+at_xfail=no
+(
+  $as_echo "1. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >expout <<'_ATEOF'
+ force verbose install
+_ATEOF
+
+
+
+
+cat >options.m4sh <<'_ATEOF'
+AS_INIT[]m4_include([getopt.m4sh])
+nl='
+'
+list=
+opts=
+M4SH_GETOPTS(
+  [a!],	[--append],	[],	[func_append list "$optarg$nl"],
+  [f],	[--force],	[],	[opts="$opts force"],
+  [i],	[--install],	[],	[opts="$opts install"],
+  [v],	[--verbose],	[],	[opts="$opts verbose"],
+  [!],	[--ltdl],	[false],[opts="$opts ltdl=$optarg"],
+[echo "$list" $opts])
+_ATEOF
+
+
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:91: \$M4SH --version || exit 77"
+at_fn_check_prepare_dynamic "$M4SH --version || exit 77" "getopt-m4sh.at:91"
+( $at_check_trace; $M4SH --version || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:91"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:91: \$M4SH -B \$abs_top_srcdir/libltdl/config options.m4sh > t-options"
+at_fn_check_prepare_dynamic "$M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options" "getopt-m4sh.at:91"
+( $at_check_trace; $M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:91"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:91: test \$at_status -eq 63 && exit 77"
+at_fn_check_prepare_dynamic "test $at_status -eq 63 && exit 77" "getopt-m4sh.at:91"
+( $at_check_trace; test $at_status -eq 63 && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:91"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$SED "s,@LN_S\@,$LN_S,g;s,@SED\@,$SED,g" t-options > options
+
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:93: \$SHELL ./options -fvi"
+at_fn_check_prepare_dynamic "$SHELL ./options -fvi" "getopt-m4sh.at:93"
+( $at_check_trace; $SHELL ./options -fvi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:93"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_1
+#AT_START_2
+at_fn_group_banner 2 'getopt-m4sh.at:98' \
+  "enhanced shell short option splitting" "          " 1
+at_xfail=no
+(
+  $as_echo "2. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+# Don't bother with additional XSI checks unless functions were substituted
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:101: fgrep '# Extended-shell func_split_short_opt' \$abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)"
+at_fn_check_prepare_dynamic "fgrep '# Extended-shell func_split_short_opt' $abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)" "getopt-m4sh.at:101"
+( $at_check_trace; fgrep '# Extended-shell func_split_short_opt' $abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:101"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+cat >expout <<'_ATEOF'
+ force verbose install
+_ATEOF
+
+
+
+
+cat >options.m4sh <<'_ATEOF'
+AS_INIT[]m4_include([getopt.m4sh])
+nl='
+'
+list=
+opts=
+M4SH_GETOPTS(
+  [a!],	[--append],	[],	[func_append list "$optarg$nl"],
+  [f],	[--force],	[],	[opts="$opts force"],
+  [i],	[--install],	[],	[opts="$opts install"],
+  [v],	[--verbose],	[],	[opts="$opts verbose"],
+  [!],	[--ltdl],	[false],[opts="$opts ltdl=$optarg"],
+[echo "$list" $opts])
+_ATEOF
+
+
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:107: \$M4SH --version || exit 77"
+at_fn_check_prepare_dynamic "$M4SH --version || exit 77" "getopt-m4sh.at:107"
+( $at_check_trace; $M4SH --version || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:107"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:107: \$M4SH -B \$abs_top_srcdir/libltdl/config options.m4sh > t-options"
+at_fn_check_prepare_dynamic "$M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options" "getopt-m4sh.at:107"
+( $at_check_trace; $M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:107"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:107: test \$at_status -eq 63 && exit 77"
+at_fn_check_prepare_dynamic "test $at_status -eq 63 && exit 77" "getopt-m4sh.at:107"
+( $at_check_trace; test $at_status -eq 63 && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:107"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$SED "s,@LN_S\@,$LN_S,g;s,@SED\@,$SED,g" t-options > options
+
+$SED '/^# func_split_short_opt/q' options > options.tmp
+$SED -n '/^func_split_short_opt ()/,/^} # Extended-shell func_split_short_opt /p' $abs_top_builddir/libtool >> options.tmp
+$SED '1,/^} # func_split_short_opt /d' options >> options.tmp
+rm -f options && mv options.tmp options
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:110: \$SHELL ./options -fvi"
+at_fn_check_prepare_dynamic "$SHELL ./options -fvi" "getopt-m4sh.at:110"
+( $at_check_trace; $SHELL ./options -fvi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:110"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_2
+#AT_START_3
+at_fn_group_banner 3 'getopt-m4sh.at:119' \
+  "long option splitting" "                          " 1
+at_xfail=no
+(
+  $as_echo "3. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >expout <<'_ATEOF'
+ ltdl=long
+_ATEOF
+
+
+
+
+cat >options.m4sh <<'_ATEOF'
+AS_INIT[]m4_include([getopt.m4sh])
+nl='
+'
+list=
+opts=
+M4SH_GETOPTS(
+  [a!],	[--append],	[],	[func_append list "$optarg$nl"],
+  [f],	[--force],	[],	[opts="$opts force"],
+  [i],	[--install],	[],	[opts="$opts install"],
+  [v],	[--verbose],	[],	[opts="$opts verbose"],
+  [!],	[--ltdl],	[false],[opts="$opts ltdl=$optarg"],
+[echo "$list" $opts])
+_ATEOF
+
+
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:125: \$M4SH --version || exit 77"
+at_fn_check_prepare_dynamic "$M4SH --version || exit 77" "getopt-m4sh.at:125"
+( $at_check_trace; $M4SH --version || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:125"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:125: \$M4SH -B \$abs_top_srcdir/libltdl/config options.m4sh > t-options"
+at_fn_check_prepare_dynamic "$M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options" "getopt-m4sh.at:125"
+( $at_check_trace; $M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:125"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:125: test \$at_status -eq 63 && exit 77"
+at_fn_check_prepare_dynamic "test $at_status -eq 63 && exit 77" "getopt-m4sh.at:125"
+( $at_check_trace; test $at_status -eq 63 && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:125"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$SED "s,@LN_S\@,$LN_S,g;s,@SED\@,$SED,g" t-options > options
+
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:127: \$SHELL ./options --ltdl=long"
+at_fn_check_prepare_dynamic "$SHELL ./options --ltdl=long" "getopt-m4sh.at:127"
+( $at_check_trace; $SHELL ./options --ltdl=long
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:127"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_3
+#AT_START_4
+at_fn_group_banner 4 'getopt-m4sh.at:132' \
+  "XSI long option splitting" "                      " 1
+at_xfail=no
+(
+  $as_echo "4. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+# Don't bother with additional XSI checks unless functions were substituted
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:135: fgrep '# Extended-shell func_split_long_opt' \$abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)"
+at_fn_check_prepare_dynamic "fgrep '# Extended-shell func_split_long_opt' $abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)" "getopt-m4sh.at:135"
+( $at_check_trace; fgrep '# Extended-shell func_split_long_opt' $abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:135"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+cat >expout <<'_ATEOF'
+ ltdl=long
+_ATEOF
+
+
+
+
+cat >options.m4sh <<'_ATEOF'
+AS_INIT[]m4_include([getopt.m4sh])
+nl='
+'
+list=
+opts=
+M4SH_GETOPTS(
+  [a!],	[--append],	[],	[func_append list "$optarg$nl"],
+  [f],	[--force],	[],	[opts="$opts force"],
+  [i],	[--install],	[],	[opts="$opts install"],
+  [v],	[--verbose],	[],	[opts="$opts verbose"],
+  [!],	[--ltdl],	[false],[opts="$opts ltdl=$optarg"],
+[echo "$list" $opts])
+_ATEOF
+
+
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:141: \$M4SH --version || exit 77"
+at_fn_check_prepare_dynamic "$M4SH --version || exit 77" "getopt-m4sh.at:141"
+( $at_check_trace; $M4SH --version || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:141"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:141: \$M4SH -B \$abs_top_srcdir/libltdl/config options.m4sh > t-options"
+at_fn_check_prepare_dynamic "$M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options" "getopt-m4sh.at:141"
+( $at_check_trace; $M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:141"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:141: test \$at_status -eq 63 && exit 77"
+at_fn_check_prepare_dynamic "test $at_status -eq 63 && exit 77" "getopt-m4sh.at:141"
+( $at_check_trace; test $at_status -eq 63 && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:141"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$SED "s,@LN_S\@,$LN_S,g;s,@SED\@,$SED,g" t-options > options
+
+$SED '/^# func_split_long_opt/q' options > options.tmp
+$SED -n '/^func_split_long_opt ()/,/^} # Extended-shell func_split_long_opt /p' $abs_top_builddir/libtool >> options.tmp
+$SED '1,/^} # func_split_long_opt /d' options >> options.tmp
+rm -f options && mv options.tmp options
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:144: \$SHELL ./options --ltdl=long"
+at_fn_check_prepare_dynamic "$SHELL ./options --ltdl=long" "getopt-m4sh.at:144"
+( $at_check_trace; $SHELL ./options --ltdl=long
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:144"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_4
+#AT_START_5
+at_fn_group_banner 5 'getopt-m4sh.at:153' \
+  "option appending" "                               " 1
+at_xfail=no
+(
+  $as_echo "5. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >expout <<'_ATEOF'
+first   --append second
+third
+
+_ATEOF
+
+
+
+
+cat >options.m4sh <<'_ATEOF'
+AS_INIT[]m4_include([getopt.m4sh])
+nl='
+'
+list=
+opts=
+M4SH_GETOPTS(
+  [a!],	[--append],	[],	[func_append list "$optarg$nl"],
+  [f],	[--force],	[],	[opts="$opts force"],
+  [i],	[--install],	[],	[opts="$opts install"],
+  [v],	[--verbose],	[],	[opts="$opts verbose"],
+  [!],	[--ltdl],	[false],[opts="$opts ltdl=$optarg"],
+[echo "$list" $opts])
+_ATEOF
+
+
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:161: \$M4SH --version || exit 77"
+at_fn_check_prepare_dynamic "$M4SH --version || exit 77" "getopt-m4sh.at:161"
+( $at_check_trace; $M4SH --version || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:161"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:161: \$M4SH -B \$abs_top_srcdir/libltdl/config options.m4sh > t-options"
+at_fn_check_prepare_dynamic "$M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options" "getopt-m4sh.at:161"
+( $at_check_trace; $M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:161"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:161: test \$at_status -eq 63 && exit 77"
+at_fn_check_prepare_dynamic "test $at_status -eq 63 && exit 77" "getopt-m4sh.at:161"
+( $at_check_trace; test $at_status -eq 63 && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:161"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$SED "s,@LN_S\@,$LN_S,g;s,@SED\@,$SED,g" t-options > options
+
+$SED '/^# func_dirname /q' options > options.tmp
+echo '# func_append var value' >> options.tmp
+$SED -n '/^func_append ()/,/^} # func_append /p' $abs_top_srcdir/libltdl/config/ltmain.m4sh >> options.tmp
+$SED '1,/^# func_dirname/d' options >> options.tmp
+rm -f options && mv options.tmp options
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:164: \$SHELL ./options -a \"first   --append second\" -athird"
+at_fn_check_prepare_dynamic "$SHELL ./options -a \"first   --append second\" -athird" "getopt-m4sh.at:164"
+( $at_check_trace; $SHELL ./options -a "first   --append second" -athird
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:164"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_5
+#AT_START_6
+at_fn_group_banner 6 'getopt-m4sh.at:169' \
+  "enhanced shell option appending" "                " 1
+at_xfail=no
+(
+  $as_echo "6. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+# Don't bother with additional += check unless functions were substituted
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:172: fgrep '# Extended-shell func_append ' \$abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)"
+at_fn_check_prepare_dynamic "fgrep '# Extended-shell func_append ' $abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)" "getopt-m4sh.at:172"
+( $at_check_trace; fgrep '# Extended-shell func_append ' $abs_top_builddir/libtool >/dev/null 2>&1 || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:172"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+cat >expout <<'_ATEOF'
+first   --append second
+third
+
+_ATEOF
+
+
+
+
+cat >options.m4sh <<'_ATEOF'
+AS_INIT[]m4_include([getopt.m4sh])
+nl='
+'
+list=
+opts=
+M4SH_GETOPTS(
+  [a!],	[--append],	[],	[func_append list "$optarg$nl"],
+  [f],	[--force],	[],	[opts="$opts force"],
+  [i],	[--install],	[],	[opts="$opts install"],
+  [v],	[--verbose],	[],	[opts="$opts verbose"],
+  [!],	[--ltdl],	[false],[opts="$opts ltdl=$optarg"],
+[echo "$list" $opts])
+_ATEOF
+
+
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:180: \$M4SH --version || exit 77"
+at_fn_check_prepare_dynamic "$M4SH --version || exit 77" "getopt-m4sh.at:180"
+( $at_check_trace; $M4SH --version || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:180"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:180: \$M4SH -B \$abs_top_srcdir/libltdl/config options.m4sh > t-options"
+at_fn_check_prepare_dynamic "$M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options" "getopt-m4sh.at:180"
+( $at_check_trace; $M4SH -B $abs_top_srcdir/libltdl/config options.m4sh > t-options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:180"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:180: test \$at_status -eq 63 && exit 77"
+at_fn_check_prepare_dynamic "test $at_status -eq 63 && exit 77" "getopt-m4sh.at:180"
+( $at_check_trace; test $at_status -eq 63 && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:180"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$SED "s,@LN_S\@,$LN_S,g;s,@SED\@,$SED,g" t-options > options
+
+$SED '/^# func_dirname /q' options > options.tmp
+echo '# func_append var value' >> options.tmp
+$SED -n '/^func_append ()/,/^} # func_append /p' $abs_top_srcdir/libltdl/config/ltmain.m4sh >> options.tmp
+$SED '1,/^# func_dirname/d' options >> options.tmp
+rm -f options && mv options.tmp options
+$SED '/^# func_append/q' options > options.tmp
+$SED -n '/^func_append ()/,/^} # Extended-shell func_append /p' $abs_top_builddir/libtool >> options.tmp
+$SED '1,/^} # func_append /d' options >> options.tmp
+rm -f options && mv options.tmp options
+
+{ set +x
+$as_echo "$at_srcdir/getopt-m4sh.at:184: \$SHELL ./options -a \"first   --append second\" -athird"
+at_fn_check_prepare_dynamic "$SHELL ./options -a \"first   --append second\" -athird" "getopt-m4sh.at:184"
+( $at_check_trace; $SHELL ./options -a "first   --append second" -athird
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/getopt-m4sh.at:184"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_6
+#AT_START_7
+at_fn_group_banner 7 'libtoolize.at:83' \
+  "libtoolize macro installation" "                  " 2
+at_xfail=no
+(
+  $as_echo "7. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:99: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:99"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:99"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_7
+#AT_START_8
+at_fn_group_banner 8 'libtoolize.at:108' \
+  "libtoolize macro directory mismatch error" "      " 2
+at_xfail=no
+(
+  $as_echo "8. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I me2
+_ATEOF
+
+
+cat >experr <<'_ATEOF'
+libtoolize: AC_CONFIG_MACRO_DIR([m4]) conflicts with ACLOCAL_AMFLAGS=-I me2.
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < experr > experr.t
+mv -f experr.t experr
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:120: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:120"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+$at_diff experr "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/libtoolize.at:120"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_8
+#AT_START_9
+at_fn_group_banner 9 'libtoolize.at:128' \
+  "libtoolize macro serial update" "                 " 2
+at_xfail=no
+(
+  $as_echo "9. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+
+test -d m4 || { rm -f m4 && mkdir m4; }
+
+rm -f m4/libtool.m4 m4/ltoptions.m4 build-aux/ltmain.sh
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I m4
+_ATEOF
+
+
+# This file should be upgraded.
+cat >m4/libtool.m4 <<'_ATEOF'
+
+# serial 25 LT_INIT
+_ATEOF
+
+
+# This file has a very high serial number, and should be left unchanged
+# until --force is passed.
+cat >m4/ltoptions.m4 <<'_ATEOF'
+
+# serial 99999 ltoptions.m4
+_ATEOF
+
+
+test -d build-aux || { rm -f build-aux && mkdir build-aux; }
+
+# This file has a very high serial number, and needs --force to be updated.
+cat >build-aux/ltmain.sh <<'_ATEOF'
+
+package_revision=9999.9999
+_ATEOF
+
+
+# This file has a very old serial number, but should be left unchanged
+# unless the --install flag is invoked.
+cat >build-aux/config.guess <<'_ATEOF'
+
+timestamp='1970-01-01'
+_ATEOF
+
+
+
+
+
+## -------------------------------------------------------------------- ##
+## First we try to update with some newer files in the destination dir. ##
+## -------------------------------------------------------------------- ##
+
+cat >expout <<'_ATEOF'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+_ATEOF
+
+
+cat >experr <<'_ATEOF'
+libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite
+libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < experr > experr.t
+mv -f experr.t experr
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:151: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:151"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+$at_diff experr "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:151"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## ---------------------------------------------------------- ##
+## Next, a second update attempt with everything now updated. ##
+## ---------------------------------------------------------- ##
+
+: >expout
+
+cat >experr <<'_ATEOF'
+libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite
+libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < experr > experr.t
+mv -f experr.t experr
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:165: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:165"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+$at_diff experr "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:165"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## ----------------------------------------------------------- ##
+## Now, a forced update to downgrade files with newer serials. ##
+## ----------------------------------------------------------- ##
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:183: \$LIBTOOLIZE --copy --force
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:183"
+( $at_check_trace; $LIBTOOLIZE --copy --force
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:183"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## ---------------------------------------------------------------- ##
+## A final update attempt with everything previously force updated. ##
+## ---------------------------------------------------------------- ##
+
+: >expout
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:192: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:192"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:192"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_9
+#AT_START_10
+at_fn_group_banner 10 'libtoolize.at:201' \
+  "libtoolize config files serial update" "          " 2
+at_xfail=no
+(
+  $as_echo "10. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+
+test -d m4 || { rm -f m4 && mkdir m4; }
+
+rm -f m4/libtool.m4 m4/ltoptions.m4 build-aux/ltmain.sh
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I m4
+_ATEOF
+
+
+# This file should be upgraded.
+cat >m4/libtool.m4 <<'_ATEOF'
+
+# serial 25 LT_INIT
+_ATEOF
+
+
+# This file has a very high serial number, and should be left unchanged
+# until --force is passed.
+cat >m4/ltoptions.m4 <<'_ATEOF'
+
+# serial 99999 ltoptions.m4
+_ATEOF
+
+
+test -d build-aux || { rm -f build-aux && mkdir build-aux; }
+
+# This file has a very high serial number, and needs --force to be updated.
+cat >build-aux/ltmain.sh <<'_ATEOF'
+
+package_revision=9999.9999
+_ATEOF
+
+
+# This file has a very old serial number, but should be left unchanged
+# unless the --install flag is invoked.
+cat >build-aux/config.guess <<'_ATEOF'
+
+timestamp='1970-01-01'
+_ATEOF
+
+
+
+
+
+## -------------------------------------------------------------------- ##
+## First we try to update with some newer files in the destination dir. ##
+## -------------------------------------------------------------------- ##
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+_ATEOF
+
+
+cat >experr <<'_ATEOF'
+libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite
+libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < experr > experr.t
+mv -f experr.t experr
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:228: \$LIBTOOLIZE --copy --install
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:228"
+( $at_check_trace; $LIBTOOLIZE --copy --install
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+$at_diff experr "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:228"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## ---------------------------------------------------------- ##
+## Next, a second update attempt with everything now updated. ##
+## ---------------------------------------------------------- ##
+
+: >expout
+
+cat >experr <<'_ATEOF'
+libtoolize: `build-aux/ltmain.sh' is newer: use `--force' to overwrite
+libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < experr > experr.t
+mv -f experr.t experr
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:242: \$LIBTOOLIZE --copy --install
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:242"
+( $at_check_trace; $LIBTOOLIZE --copy --install
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+$at_diff experr "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:242"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## ----------------------------------------------------------- ##
+## Now, a forced update to downgrade files with newer serials. ##
+## ----------------------------------------------------------- ##
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:263: \$LIBTOOLIZE --copy --force --install
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:263"
+( $at_check_trace; $LIBTOOLIZE --copy --force --install
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:263"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## ---------------------------------------------------------------- ##
+## A final update attempt with everything previously force updated. ##
+## ---------------------------------------------------------------- ##
+
+: >expout
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:272: \$LIBTOOLIZE --copy --install
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:272"
+( $at_check_trace; $LIBTOOLIZE --copy --install
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:272"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_10
+#AT_START_11
+at_fn_group_banner 11 'libtoolize.at:281' \
+  "diagnose missing LT_CONFIG_LTDL_DIR" "            " 2
+at_xfail=no
+(
+  $as_echo "11. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/argz.m4'
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltdl.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in `ltdl'.
+libtoolize: copying file `ltdl/COPYING.LIB'
+libtoolize: copying file `ltdl/README'
+libtoolize: copying file `ltdl/argz_.h'
+libtoolize: copying file `ltdl/argz.c'
+libtoolize: copying file `ltdl/loaders/dld_link.c'
+libtoolize: copying file `ltdl/loaders/dlopen.c'
+libtoolize: copying file `ltdl/loaders/dyld.c'
+libtoolize: copying file `ltdl/loaders/load_add_on.c'
+libtoolize: copying file `ltdl/loaders/loadlibrary.c'
+libtoolize: copying file `ltdl/loaders/shl_load.c'
+libtoolize: copying file `ltdl/lt__dirent.c'
+libtoolize: copying file `ltdl/lt__strl.c'
+libtoolize: copying file `ltdl/libltdl/lt__alloc.h'
+libtoolize: copying file `ltdl/libltdl/lt__dirent.h'
+libtoolize: copying file `ltdl/libltdl/lt__glibc.h'
+libtoolize: copying file `ltdl/libltdl/lt__private.h'
+libtoolize: copying file `ltdl/libltdl/lt__strl.h'
+libtoolize: copying file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: copying file `ltdl/libltdl/lt_error.h'
+libtoolize: copying file `ltdl/libltdl/lt_system.h'
+libtoolize: copying file `ltdl/libltdl/slist.h'
+libtoolize: copying file `ltdl/loaders/preopen.c'
+libtoolize: copying file `ltdl/lt__alloc.c'
+libtoolize: copying file `ltdl/lt_dlloader.c'
+libtoolize: copying file `ltdl/lt_error.c'
+libtoolize: copying file `ltdl/ltdl.c'
+libtoolize: copying file `ltdl/ltdl.h'
+libtoolize: copying file `ltdl/slist.c'
+libtoolize: creating file `ltdl/Makefile.inc'
+libtoolize: Remember to add `LT_CONFIG_LTDL_DIR([ltdl])' to `configure.ac'.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+_ATEOF
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+LTDL_INIT([nonrecursive])
+AC_OUTPUT
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:340: \$LIBTOOLIZE --copy --install --ltdl=ltdl
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:340"
+( $at_check_trace; $LIBTOOLIZE --copy --install --ltdl=ltdl
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:340"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_11
+#AT_START_12
+at_fn_group_banner 12 'libtoolize.at:426' \
+  "copy ltdl.m4 with shared macro directory" "       " 2
+at_xfail=no
+(
+  $as_echo "12. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `ltdl/config'.
+libtoolize: linking file `ltdl/config/compile'
+libtoolize: linking file `ltdl/config/config.guess'
+libtoolize: linking file `ltdl/config/config.sub'
+libtoolize: linking file `ltdl/config/depcomp'
+libtoolize: linking file `ltdl/config/install-sh'
+libtoolize: linking file `ltdl/config/missing'
+libtoolize: linking file `ltdl/config/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'.
+libtoolize: linking file `ltdl/m4/argz.m4'
+libtoolize: linking file `ltdl/m4/libtool.m4'
+libtoolize: linking file `ltdl/m4/ltdl.m4'
+libtoolize: linking file `ltdl/m4/ltoptions.m4'
+libtoolize: linking file `ltdl/m4/ltsugar.m4'
+libtoolize: linking file `ltdl/m4/ltversion.m4'
+libtoolize: linking file `ltdl/m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'.
+libtoolize: linking file `ltdl/COPYING.LIB'
+libtoolize: linking file `ltdl/README'
+libtoolize: linking file `ltdl/Makefile.am'
+libtoolize: linking file `ltdl/configure.ac'
+libtoolize: copying file `ltdl/aclocal.m4'
+libtoolize: linking file `ltdl/Makefile.in'
+libtoolize: linking file `ltdl/config-h.in'
+libtoolize: linking file `ltdl/configure'
+libtoolize: linking file `ltdl/argz_.h'
+libtoolize: linking file `ltdl/argz.c'
+libtoolize: linking file `ltdl/loaders/dld_link.c'
+libtoolize: linking file `ltdl/loaders/dlopen.c'
+libtoolize: linking file `ltdl/loaders/dyld.c'
+libtoolize: linking file `ltdl/loaders/load_add_on.c'
+libtoolize: linking file `ltdl/loaders/loadlibrary.c'
+libtoolize: linking file `ltdl/loaders/shl_load.c'
+libtoolize: linking file `ltdl/lt__dirent.c'
+libtoolize: linking file `ltdl/lt__strl.c'
+libtoolize: linking file `ltdl/libltdl/lt__alloc.h'
+libtoolize: linking file `ltdl/libltdl/lt__dirent.h'
+libtoolize: linking file `ltdl/libltdl/lt__glibc.h'
+libtoolize: linking file `ltdl/libltdl/lt__private.h'
+libtoolize: linking file `ltdl/libltdl/lt__strl.h'
+libtoolize: linking file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: linking file `ltdl/libltdl/lt_error.h'
+libtoolize: linking file `ltdl/libltdl/lt_system.h'
+libtoolize: linking file `ltdl/libltdl/slist.h'
+libtoolize: linking file `ltdl/loaders/preopen.c'
+libtoolize: linking file `ltdl/lt__alloc.c'
+libtoolize: linking file `ltdl/lt_dlloader.c'
+libtoolize: linking file `ltdl/lt_error.c'
+libtoolize: linking file `ltdl/ltdl.c'
+libtoolize: linking file `ltdl/ltdl.h'
+libtoolize: linking file `ltdl/slist.c'
+_ATEOF
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+LT_INIT
+LTDL_INIT
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I ltdl/m4
+_ATEOF
+
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:430: \$LIBTOOLIZE --ltdl
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:430"
+( $at_check_trace; $LIBTOOLIZE --ltdl
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:430"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_12
+#AT_START_13
+at_fn_group_banner 13 'libtoolize.at:438' \
+  "correctly parse LTDL_INIT from configure.ac" "    " 2
+at_xfail=no
+(
+  $as_echo "13. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `ltdl/config'.
+libtoolize: linking file `ltdl/config/compile'
+libtoolize: linking file `ltdl/config/config.guess'
+libtoolize: linking file `ltdl/config/config.sub'
+libtoolize: linking file `ltdl/config/depcomp'
+libtoolize: linking file `ltdl/config/install-sh'
+libtoolize: linking file `ltdl/config/missing'
+libtoolize: linking file `ltdl/config/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'.
+libtoolize: linking file `ltdl/m4/argz.m4'
+libtoolize: linking file `ltdl/m4/libtool.m4'
+libtoolize: linking file `ltdl/m4/ltdl.m4'
+libtoolize: linking file `ltdl/m4/ltoptions.m4'
+libtoolize: linking file `ltdl/m4/ltsugar.m4'
+libtoolize: linking file `ltdl/m4/ltversion.m4'
+libtoolize: linking file `ltdl/m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'.
+libtoolize: linking file `ltdl/COPYING.LIB'
+libtoolize: linking file `ltdl/README'
+libtoolize: linking file `ltdl/Makefile.am'
+libtoolize: linking file `ltdl/configure.ac'
+libtoolize: copying file `ltdl/aclocal.m4'
+libtoolize: linking file `ltdl/Makefile.in'
+libtoolize: linking file `ltdl/config-h.in'
+libtoolize: linking file `ltdl/configure'
+libtoolize: linking file `ltdl/argz_.h'
+libtoolize: linking file `ltdl/argz.c'
+libtoolize: linking file `ltdl/loaders/dld_link.c'
+libtoolize: linking file `ltdl/loaders/dlopen.c'
+libtoolize: linking file `ltdl/loaders/dyld.c'
+libtoolize: linking file `ltdl/loaders/load_add_on.c'
+libtoolize: linking file `ltdl/loaders/loadlibrary.c'
+libtoolize: linking file `ltdl/loaders/shl_load.c'
+libtoolize: linking file `ltdl/lt__dirent.c'
+libtoolize: linking file `ltdl/lt__strl.c'
+libtoolize: linking file `ltdl/libltdl/lt__alloc.h'
+libtoolize: linking file `ltdl/libltdl/lt__dirent.h'
+libtoolize: linking file `ltdl/libltdl/lt__glibc.h'
+libtoolize: linking file `ltdl/libltdl/lt__private.h'
+libtoolize: linking file `ltdl/libltdl/lt__strl.h'
+libtoolize: linking file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: linking file `ltdl/libltdl/lt_error.h'
+libtoolize: linking file `ltdl/libltdl/lt_system.h'
+libtoolize: linking file `ltdl/libltdl/slist.h'
+libtoolize: linking file `ltdl/loaders/preopen.c'
+libtoolize: linking file `ltdl/lt__alloc.c'
+libtoolize: linking file `ltdl/lt_dlloader.c'
+libtoolize: linking file `ltdl/lt_error.c'
+libtoolize: linking file `ltdl/ltdl.c'
+libtoolize: linking file `ltdl/ltdl.h'
+libtoolize: linking file `ltdl/slist.c'
+_ATEOF
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+LT_INIT
+LTDL_INIT
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I ltdl/m4
+_ATEOF
+
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:442: \$LIBTOOLIZE
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:442"
+( $at_check_trace; $LIBTOOLIZE
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:442"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_13
+#AT_START_14
+at_fn_group_banner 14 'libtoolize.at:450' \
+  "diagnose missing LTDL_INIT invocation" "          " 2
+at_xfail=no
+(
+  $as_echo "14. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `ltdl/config'.
+libtoolize: copying file `ltdl/config/compile'
+libtoolize: copying file `ltdl/config/config.guess'
+libtoolize: copying file `ltdl/config/config.sub'
+libtoolize: copying file `ltdl/config/depcomp'
+libtoolize: copying file `ltdl/config/install-sh'
+libtoolize: copying file `ltdl/config/missing'
+libtoolize: copying file `ltdl/config/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `ltdl/m4'.
+libtoolize: copying file `ltdl/m4/argz.m4'
+libtoolize: copying file `ltdl/m4/libtool.m4'
+libtoolize: copying file `ltdl/m4/ltdl.m4'
+libtoolize: copying file `ltdl/m4/ltoptions.m4'
+libtoolize: copying file `ltdl/m4/ltsugar.m4'
+libtoolize: copying file `ltdl/m4/ltversion.m4'
+libtoolize: copying file `ltdl/m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'.
+libtoolize: copying file `ltdl/COPYING.LIB'
+libtoolize: copying file `ltdl/README'
+libtoolize: copying file `ltdl/Makefile.am'
+libtoolize: copying file `ltdl/configure.ac'
+libtoolize: copying file `ltdl/aclocal.m4'
+libtoolize: copying file `ltdl/Makefile.in'
+libtoolize: copying file `ltdl/config-h.in'
+libtoolize: copying file `ltdl/configure'
+libtoolize: copying file `ltdl/argz_.h'
+libtoolize: copying file `ltdl/argz.c'
+libtoolize: copying file `ltdl/loaders/dld_link.c'
+libtoolize: copying file `ltdl/loaders/dlopen.c'
+libtoolize: copying file `ltdl/loaders/dyld.c'
+libtoolize: copying file `ltdl/loaders/load_add_on.c'
+libtoolize: copying file `ltdl/loaders/loadlibrary.c'
+libtoolize: copying file `ltdl/loaders/shl_load.c'
+libtoolize: copying file `ltdl/lt__dirent.c'
+libtoolize: copying file `ltdl/lt__strl.c'
+libtoolize: copying file `ltdl/libltdl/lt__alloc.h'
+libtoolize: copying file `ltdl/libltdl/lt__dirent.h'
+libtoolize: copying file `ltdl/libltdl/lt__glibc.h'
+libtoolize: copying file `ltdl/libltdl/lt__private.h'
+libtoolize: copying file `ltdl/libltdl/lt__strl.h'
+libtoolize: copying file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: copying file `ltdl/libltdl/lt_error.h'
+libtoolize: copying file `ltdl/libltdl/lt_system.h'
+libtoolize: copying file `ltdl/libltdl/slist.h'
+libtoolize: copying file `ltdl/loaders/preopen.c'
+libtoolize: copying file `ltdl/lt__alloc.c'
+libtoolize: copying file `ltdl/lt_dlloader.c'
+libtoolize: copying file `ltdl/lt_error.c'
+libtoolize: copying file `ltdl/ltdl.c'
+libtoolize: copying file `ltdl/ltdl.h'
+libtoolize: copying file `ltdl/slist.c'
+libtoolize: Remember to add `LTDL_INIT' to configure.ac.
+libtoolize: Consider adding `-I ltdl/m4' to ACLOCAL_AMFLAGS in Makefile.am.
+_ATEOF
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:517: \$LIBTOOLIZE --ltdl --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:517"
+( $at_check_trace; $LIBTOOLIZE --ltdl --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:517"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_14
+#AT_START_15
+at_fn_group_banner 15 'libtoolize.at:527' \
+  "upgrading verbatim style aclocal.m4" "            " 2
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+(
+  $as_echo "15. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([build-aux])
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: You should add the contents of the following files to `aclocal.m4':
+libtoolize:   `/usr/local/share/aclocal/libtool.m4'
+libtoolize:   `/usr/local/share/aclocal/ltoptions.m4'
+libtoolize:   `/usr/local/share/aclocal/ltversion.m4'
+libtoolize:   `/usr/local/share/aclocal/ltsugar.m4'
+libtoolize:   `/usr/local/share/aclocal/lt~obsolete.m4'
+libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
+libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:550: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:550"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:550"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## --------------------------------------- ##
+## Upgrading a hand maintained aclocal.m4. ##
+## --------------------------------------- ##
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I m4
+_ATEOF
+
+
+cat >aclocal.m4 <<'_ATEOF'
+# This should need upgrading:
+# serial 25 LT_INIT
+AC_DEFUN([LT_INIT],
+[blah])
+
+# This is newer than the upgrade version:
+# serial 99999 ltoptions.m4
+
+# This is older than the upgrade version:
+# serial 1 ltversion.m4
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: You should add the contents of `m4/ltsugar.m4' to `aclocal.m4'.
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: You should add the contents of `m4/ltversion.m4' to `aclocal.m4'.
+libtoolize: copying file `m4/lt~obsolete.m4'
+libtoolize: You should add the contents of `m4/lt~obsolete.m4' to `aclocal.m4'.
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:594: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:594"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:594"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## ------------------------------------------- ##
+## Upgrading an aclocal maintained aclocal.m4. ##
+## ------------------------------------------- ##
+
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:601: \$ACLOCAL -I m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I m4" "libtoolize.at:601"
+( $at_check_trace; $ACLOCAL -I m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:601"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+rm -f m4/libtool.m4 m4/ltoptions.m4
+
+# This file should be upgraded.
+cat >m4/libtool.m4 <<'_ATEOF'
+
+# serial 25 LT_INIT
+AC_DEFUN([LT_INIT])
+_ATEOF
+
+
+# This file has a very high serial number, and should be left unchanged.
+cat >m4/ltoptions.m4 <<'_ATEOF'
+
+# serial 99999 ltoptions.m4
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+_ATEOF
+
+
+cat >experr <<'_ATEOF'
+libtoolize: `m4/ltoptions.m4' is newer: use `--force' to overwrite
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < experr > experr.t
+mv -f experr.t experr
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:625: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:625"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+$at_diff experr "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:625"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+## ----------------------------------------------------------- ##
+## Now, a forced update to downgrade files with newer serials. ##
+## ----------------------------------------------------------- ##
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:642: \$LIBTOOLIZE --copy --force
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:642"
+( $at_check_trace; $LIBTOOLIZE --copy --force
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:642"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_15
+#AT_START_16
+at_fn_group_banner 16 'libtoolize.at:651' \
+  "verbatim aclocal.m4 w/o AC_CONFIG_MACRO_DIR" "    " 2
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+(
+  $as_echo "16. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+cat >aclocal.m4 <<'_ATEOF'
+# This should need upgrading:
+# serial 25 LT_INIT
+AC_DEFUN([LT_INIT],
+[blah])
+
+# This is newer than the upgrade version:
+# serial 99999 ltoptions.m4
+
+# This is older than the upgrade version:
+# serial 1 ltversion.m4
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in `.'.
+libtoolize: copying file `./ltmain.sh'
+libtoolize: You should add the contents of the following files to `aclocal.m4':
+libtoolize:   `/usr/local/share/aclocal/libtool.m4'
+libtoolize:   `/usr/local/share/aclocal/ltversion.m4'
+libtoolize:   `/usr/local/share/aclocal/ltsugar.m4'
+libtoolize:   `/usr/local/share/aclocal/lt~obsolete.m4'
+libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
+libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:685: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:685"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:685"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## ----------------------------------------------------------------------- ##
+## Upgrading an aclocal maintained aclocal.m4 without AC_CONFIG_MACRO_DIR. ##
+## ----------------------------------------------------------------------- ##
+
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:692: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "libtoolize.at:692"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:692"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+## The following code is adapted (and simplified) from libtoolize.m4sh
+####
+: ${GREP="grep"}
+: ${SED="sed"}
+
+basename="s,^.*/,,"
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+# func_serial filename [macro_regex]
+# Output the value of the serial number comment in FILENAME, where the
+# comment line must also match MACRO_REGEX, if given.
+func_serial ()
+{
+    my_filename="$1"
+    my_macro_regex="$2"
+    my_sed_serial='
+	/^# serial [1-9][0-9.]*[ 	]*'"$my_macro_regex"'[ 	]*$/ {
+	    s,^# serial \([1-9][0-9.]*\).*$,\1,
+	    q
+	}
+	d'
+
+    # Search FILENAME and all the files it m4_includes for a serial number
+    # in the file that AC_DEFUNs MACRO_REGEX.
+    my_serial=
+    if test -z "$my_macro_regex" ||
+       test "$my_filename" = aclocal.m4 ||
+       test "$my_macro_regex" = `echo "$my_filename" | $SED "$basename"` ||
+       func_grep '^AC_DEFUN(\['"$my_macro_regex" "$my_filename"
+    then
+      my_serial=`$SED -e "$my_sed_serial" "$my_filename"`
+    fi
+
+    # If the file has no serial number, something is badly wrong!
+    test -n "$my_serial" || exit 1
+
+    echo $my_serial
+}
+
+# Make the serial number in aclocal.m4 higher than installed ltoptions.m4,
+# and the others match the macro files that libtoolize will compare against.
+libtool_serial=`func_serial "$tst_aclocaldir/libtool.m4" LT_INIT`
+ltversion_serial=`func_serial "$tst_aclocaldir/ltversion.m4" ltversion.m4`
+ltsugar_serial=`func_serial "$tst_aclocaldir/ltsugar.m4" ltsugar.m4`
+lt_obsolete_serial=`func_serial "$tst_aclocaldir/lt~obsolete.m4" lt~obsolete.m4`
+$SED -e 's,^#.*serial.*ltoptions.m4$,# serial 99999 ltoptions.m4,' \
+  -e "s,^#.*serial.*libtool.m4\$,# serial $libtool_serial libtool.m4," \
+  -e "s,^#.*serial.*ltversion.m4\$,# serial $ltversion_serial ltversion.m4," \
+  -e "s,^#.*serial.*ltsugar.m4\$,# serial $ltsugar_serial ltsugar.m4," \
+  -e "s,^#.*serial.*lt~obsolete.m4\$,# serial $lt_obsolete_serial lt~obsolete.m4," \
+ < aclocal.m4 > aclocal.m4t
+mv -f aclocal.m4t aclocal.m4
+
+cat >expout <<'_ATEOF'
+libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
+libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:759: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:759"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:759"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## --------------------- ##
+## Now, a forced update. ##
+## --------------------- ##
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in `.'.
+libtoolize: copying file `./ltmain.sh'
+libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
+libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
+libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:774: \$LIBTOOLIZE --copy --force
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:774"
+( $at_check_trace; $LIBTOOLIZE --copy --force
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:774"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_16
+#AT_START_17
+at_fn_group_banner 17 'libtoolize.at:783' \
+  "nonrecursive ltdl with AC_CONFIG_MACRO_DIR" "     " 2
+at_xfail=no
+(
+  $as_echo "17. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `m4'.
+libtoolize: copying file `m4/argz.m4'
+libtoolize: copying file `m4/libtool.m4'
+libtoolize: copying file `m4/ltdl.m4'
+libtoolize: copying file `m4/ltoptions.m4'
+libtoolize: copying file `m4/ltsugar.m4'
+libtoolize: copying file `m4/ltversion.m4'
+libtoolize: copying file `m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'.
+libtoolize: copying file `ltdl/COPYING.LIB'
+libtoolize: copying file `ltdl/README'
+libtoolize: copying file `ltdl/argz_.h'
+libtoolize: copying file `ltdl/argz.c'
+libtoolize: copying file `ltdl/loaders/dld_link.c'
+libtoolize: copying file `ltdl/loaders/dlopen.c'
+libtoolize: copying file `ltdl/loaders/dyld.c'
+libtoolize: copying file `ltdl/loaders/load_add_on.c'
+libtoolize: copying file `ltdl/loaders/loadlibrary.c'
+libtoolize: copying file `ltdl/loaders/shl_load.c'
+libtoolize: copying file `ltdl/lt__dirent.c'
+libtoolize: copying file `ltdl/lt__strl.c'
+libtoolize: copying file `ltdl/libltdl/lt__alloc.h'
+libtoolize: copying file `ltdl/libltdl/lt__dirent.h'
+libtoolize: copying file `ltdl/libltdl/lt__glibc.h'
+libtoolize: copying file `ltdl/libltdl/lt__private.h'
+libtoolize: copying file `ltdl/libltdl/lt__strl.h'
+libtoolize: copying file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: copying file `ltdl/libltdl/lt_error.h'
+libtoolize: copying file `ltdl/libltdl/lt_system.h'
+libtoolize: copying file `ltdl/libltdl/slist.h'
+libtoolize: copying file `ltdl/loaders/preopen.c'
+libtoolize: copying file `ltdl/lt__alloc.c'
+libtoolize: copying file `ltdl/lt_dlloader.c'
+libtoolize: copying file `ltdl/lt_error.c'
+libtoolize: copying file `ltdl/ltdl.c'
+libtoolize: copying file `ltdl/ltdl.h'
+libtoolize: copying file `ltdl/slist.c'
+libtoolize: creating file `ltdl/Makefile.inc'
+_ATEOF
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+LTDL_INIT([nonrecursive])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I m4
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:845: \$LIBTOOLIZE --copy --install --ltdl=ltdl
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:845"
+( $at_check_trace; $LIBTOOLIZE --copy --install --ltdl=ltdl
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:845"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_17
+#AT_START_18
+at_fn_group_banner 18 'libtoolize.at:854' \
+  "subproject ltdl with non-shared directories" "    " 2
+at_xfail=no
+(
+  $as_echo "18. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >expout <<'_ATEOF'
+libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `build-aux'.
+libtoolize: copying file `build-aux/config.guess'
+libtoolize: copying file `build-aux/config.sub'
+libtoolize: copying file `build-aux/install-sh'
+libtoolize: copying file `build-aux/ltmain.sh'
+libtoolize: putting auxiliary files in `build-aux'.
+libtoolize: copying file `ltdl/config/compile'
+libtoolize: copying file `ltdl/config/config.guess'
+libtoolize: copying file `ltdl/config/config.sub'
+libtoolize: copying file `ltdl/config/depcomp'
+libtoolize: copying file `ltdl/config/install-sh'
+libtoolize: copying file `ltdl/config/missing'
+libtoolize: copying file `ltdl/config/ltmain.sh'
+libtoolize: putting macros in AC_CONFIG_MACRO_DIR, `acm4'.
+libtoolize: copying file `acm4/argz.m4'
+libtoolize: copying file `acm4/libtool.m4'
+libtoolize: copying file `acm4/ltdl.m4'
+libtoolize: copying file `acm4/ltoptions.m4'
+libtoolize: copying file `acm4/ltsugar.m4'
+libtoolize: copying file `acm4/ltversion.m4'
+libtoolize: copying file `acm4/lt~obsolete.m4'
+libtoolize: putting macros in `ltdl/m4'.
+libtoolize: copying file `ltdl/m4/argz.m4'
+libtoolize: copying file `ltdl/m4/libtool.m4'
+libtoolize: copying file `ltdl/m4/ltdl.m4'
+libtoolize: copying file `ltdl/m4/ltoptions.m4'
+libtoolize: copying file `ltdl/m4/ltsugar.m4'
+libtoolize: copying file `ltdl/m4/ltversion.m4'
+libtoolize: copying file `ltdl/m4/lt~obsolete.m4'
+libtoolize: putting libltdl files in LT_CONFIG_LTDL_DIR, `ltdl'.
+libtoolize: copying file `ltdl/COPYING.LIB'
+libtoolize: copying file `ltdl/README'
+libtoolize: copying file `ltdl/Makefile.am'
+libtoolize: copying file `ltdl/configure.ac'
+libtoolize: copying file `ltdl/aclocal.m4'
+libtoolize: copying file `ltdl/Makefile.in'
+libtoolize: copying file `ltdl/config-h.in'
+libtoolize: copying file `ltdl/configure'
+libtoolize: copying file `ltdl/argz_.h'
+libtoolize: copying file `ltdl/argz.c'
+libtoolize: copying file `ltdl/loaders/dld_link.c'
+libtoolize: copying file `ltdl/loaders/dlopen.c'
+libtoolize: copying file `ltdl/loaders/dyld.c'
+libtoolize: copying file `ltdl/loaders/load_add_on.c'
+libtoolize: copying file `ltdl/loaders/loadlibrary.c'
+libtoolize: copying file `ltdl/loaders/shl_load.c'
+libtoolize: copying file `ltdl/lt__dirent.c'
+libtoolize: copying file `ltdl/lt__strl.c'
+libtoolize: copying file `ltdl/libltdl/lt__alloc.h'
+libtoolize: copying file `ltdl/libltdl/lt__dirent.h'
+libtoolize: copying file `ltdl/libltdl/lt__glibc.h'
+libtoolize: copying file `ltdl/libltdl/lt__private.h'
+libtoolize: copying file `ltdl/libltdl/lt__strl.h'
+libtoolize: copying file `ltdl/libltdl/lt_dlloader.h'
+libtoolize: copying file `ltdl/libltdl/lt_error.h'
+libtoolize: copying file `ltdl/libltdl/lt_system.h'
+libtoolize: copying file `ltdl/libltdl/slist.h'
+libtoolize: copying file `ltdl/loaders/preopen.c'
+libtoolize: copying file `ltdl/lt__alloc.c'
+libtoolize: copying file `ltdl/lt_dlloader.c'
+libtoolize: copying file `ltdl/lt_error.c'
+libtoolize: copying file `ltdl/ltdl.c'
+libtoolize: copying file `ltdl/ltdl.h'
+libtoolize: copying file `ltdl/slist.c'
+libtoolize: Consider using `AC_CONFIG_AUX_DIR([ltdl/config])' in configure.ac.
+libtoolize: Consider using `AC_CONFIG_MACRO_DIR([ltdl/m4])' in configure.ac.
+libtoolize: Consider adding `-I ltdl/m4' to ACLOCAL_AMFLAGS in Makefile.am.
+_ATEOF
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([acm4])
+LT_INIT
+LTDL_INIT([subproject])
+AC_OUTPUT
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < expout > expout.t
+mv -f expout.t expout
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:936: \$LIBTOOLIZE --copy --install
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:936"
+( $at_check_trace; $LIBTOOLIZE --copy --install
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:936"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_18
+#AT_START_19
+at_fn_group_banner 19 'libtoolize.at:945' \
+  "LIBTOOLIZE_OPTIONS" "                             " 2
+at_xfail=no
+(
+  $as_echo "19. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+
+LIBTOOLIZE_OPTIONS="narf"
+export LIBTOOLIZE_OPTIONS
+
+cat >experr <<'_ATEOF'
+libtoolize: garbled LIBTOOLIZE_OPTIONS near `narf'
+libtoolize: Try `libtoolize --help' for more information.
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < experr > experr.t
+mv -f experr.t experr
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:957: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:957"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+$at_diff experr "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/libtoolize.at:957"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## --------------------------- ##
+## Unknown LIBTOOLIZE_OPTIONS. ##
+## --------------------------- ##
+
+LIBTOOLIZE_OPTIONS=--no-such-option
+export LIBTOOLIZE_OPTIONS
+
+cat >experr <<'_ATEOF'
+libtoolize: warning: unrecognized environment option `--no-such-option'
+_ATEOF
+
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < experr > experr.t
+mv -f experr.t experr
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:971: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:971"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+$at_diff experr "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:971"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+## ----------------------------- ##
+## --no-warn environment option. ##
+## ----------------------------- ##
+
+LIBTOOLIZE_OPTIONS=--no-warn,--no-such-option
+export LIBTOOLIZE_OPTIONS
+
+: >experr
+
+lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < experr > experr.t
+mv -f experr.t experr
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:983: \$LIBTOOLIZE --copy
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:983"
+( $at_check_trace; $LIBTOOLIZE --copy
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+$at_diff experr "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:983"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_19
+#AT_START_20
+at_fn_group_banner 20 'libtoolize.at:992' \
+  "cleanup old installation" "                       " 2
+at_xfail=no
+(
+  $as_echo "20. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtoolize-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([build-aux])
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_OUTPUT
+_ATEOF
+
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I m4
+_ATEOF
+
+
+cat >acinclude.m4 <<'_ATEOF'
+AC_DEFUN([LT_INIT],
+[: keep me, I might be hand maintained!]) # LT_INIT
+_ATEOF
+
+
+cat >libltdl/acinclude.m4 <<'_ATEOF'
+AC_DEFUN([LT_INIT],
+[: delete me, I was left here by on old libltdl build]) # LT_INIT
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:1010: \$LIBTOOLIZE --copy --force --ltdl
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "libtoolize.at:1010"
+( $at_check_trace; $LIBTOOLIZE --copy --force --ltdl
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:1010"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# check files are left as expected
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:1013: grep 'keep me' acinclude.m4"
+at_fn_check_prepare_trace "libtoolize.at:1013"
+( $at_check_trace; grep 'keep me' acinclude.m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/libtoolize.at:1013"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/libtoolize.at:1014: test -f libltdl/acinclude.m4"
+at_fn_check_prepare_trace "libtoolize.at:1014"
+( $at_check_trace; test -f libltdl/acinclude.m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/libtoolize.at:1014"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_20
+#AT_START_21
+at_fn_group_banner 21 'help.at:26' \
+  "standard command line options" "                  " 3
+at_xfail=no
+(
+  $as_echo "21. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/help.at:30: \$LIBTOOLIZE --help"
+at_fn_check_prepare_dynamic "$LIBTOOLIZE --help" "help.at:30"
+( $at_check_trace; $LIBTOOLIZE --help
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:30"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:31: \$LIBTOOLIZE --version"
+at_fn_check_prepare_dynamic "$LIBTOOLIZE --version" "help.at:31"
+( $at_check_trace; $LIBTOOLIZE --version
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:31"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:32: grep 'Copyright.*Free Software Foundation' stdout"
+at_fn_check_prepare_trace "help.at:32"
+( $at_check_trace; grep 'Copyright.*Free Software Foundation' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:32"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:33: \$LIBTOOL --help"
+at_fn_check_prepare_dynamic "$LIBTOOL --help" "help.at:33"
+( $at_check_trace; $LIBTOOL --help
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:33"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:34: \$LIBTOOL --help-all"
+at_fn_check_prepare_dynamic "$LIBTOOL --help-all" "help.at:34"
+( $at_check_trace; $LIBTOOL --help-all
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:34"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:35: \$LIBTOOL --version"
+at_fn_check_prepare_dynamic "$LIBTOOL --version" "help.at:35"
+( $at_check_trace; $LIBTOOL --version
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:35"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:36: grep 'Copyright.*Free Software Foundation' stdout"
+at_fn_check_prepare_trace "help.at:36"
+( $at_check_trace; grep 'Copyright.*Free Software Foundation' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:36"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/help.at:38: \$LIBTOOL"
+at_fn_check_prepare_dynamic "$LIBTOOL" "help.at:38"
+( $at_check_trace; $LIBTOOL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/help.at:38"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:39: grep 'specify a MODE' stderr"
+at_fn_check_prepare_trace "help.at:39"
+( $at_check_trace; grep 'specify a MODE' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:39"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:40: grep ' --help' stderr"
+at_fn_check_prepare_trace "help.at:40"
+( $at_check_trace; grep ' --help' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:40"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_21
+#AT_START_22
+at_fn_group_banner 22 'help.at:45' \
+  "mode short-hands" "                               " 3
+at_xfail=no
+(
+  $as_echo "22. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >a.c <<'_ATEOF'
+int a () { return 0; }
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+extern int a ();
+int main () { return a (); }
+_ATEOF
+
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+mkdir $inst $libdir $bindir
+
+{ set +x
+$as_echo "$at_srcdir/help.at:61: \$LIBTOOL compile \$CC \$CPPFLAGS \$CFLAGS -c a.c"
+at_fn_check_prepare_dynamic "$LIBTOOL compile $CC $CPPFLAGS $CFLAGS -c a.c" "help.at:61"
+( $at_check_trace; $LIBTOOL compile $CC $CPPFLAGS $CFLAGS -c a.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:63: \$LIBTOOL co \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$LIBTOOL co $CC $CPPFLAGS $CFLAGS -c main.c" "help.at:63"
+( $at_check_trace; $LIBTOOL co $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:63"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:65: \$LIBTOOL co \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$LIBTOOL co $CC $CPPFLAGS $CFLAGS -c main.c" "help.at:65"
+( $at_check_trace; $LIBTOOL co $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:65"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:67: \$LIBTOOL link \$CC \$CFLAGS \$LDFLAGS -o liba.la a.lo 	 -no-undefined -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL link $CC $CFLAGS $LDFLAGS -o liba.la a.lo 	 -no-undefined -rpath $libdir" "help.at:67"
+( $at_check_trace; $LIBTOOL link $CC $CFLAGS $LDFLAGS -o liba.la a.lo 	 -no-undefined -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:67"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:69: \$LIBTOOL l \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.lo 	 liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL l $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.lo 	 liba.la" "help.at:69"
+( $at_check_trace; $LIBTOOL l $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.lo 	 liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:69"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:71: \$LIBTOOL execute --dry-run ./main\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL execute --dry-run ./main$EXEEXT" "help.at:71"
+( $at_check_trace; $LIBTOOL execute --dry-run ./main$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:71"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:73: \$LIBTOOL exe --dry-run ./main\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL exe --dry-run ./main$EXEEXT" "help.at:73"
+( $at_check_trace; $LIBTOOL exe --dry-run ./main$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:73"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:75: \$LIBTOOL e --dry-run ./main\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL e --dry-run ./main$EXEEXT" "help.at:75"
+( $at_check_trace; $LIBTOOL e --dry-run ./main$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:75"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:77: \$LIBTOOL install cp liba.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL install cp liba.la $libdir" "help.at:77"
+( $at_check_trace; $LIBTOOL install cp liba.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:77"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:79: \$LIBTOOL i cp main\$EXEEXT \$bindir"
+at_fn_check_prepare_dynamic "$LIBTOOL i cp main$EXEEXT $bindir" "help.at:79"
+( $at_check_trace; $LIBTOOL i cp main$EXEEXT $bindir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:79"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:81: \$LIBTOOL finish \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL finish $libdir" "help.at:81"
+( $at_check_trace; $LIBTOOL finish $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:81"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:83: \$LIBTOOL f \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL f $libdir" "help.at:83"
+( $at_check_trace; $LIBTOOL f $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:83"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:85: \$LIBTOOL uninstall rm -f \$libdir/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL uninstall rm -f $libdir/liba.la" "help.at:85"
+( $at_check_trace; $LIBTOOL uninstall rm -f $libdir/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:87: \$LIBTOOL u rm -f \$bindir/main\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL u rm -f $bindir/main$EXEEXT" "help.at:87"
+( $at_check_trace; $LIBTOOL u rm -f $bindir/main$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:89: \$LIBTOOL clean rm -f main\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL clean rm -f main$EXEEXT" "help.at:89"
+( $at_check_trace; $LIBTOOL clean rm -f main$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:89"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/help.at:91: \$LIBTOOL cl liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL cl liba.la" "help.at:91"
+( $at_check_trace; $LIBTOOL cl liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:91"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_22
+#AT_START_23
+at_fn_group_banner 23 'help.at:97' \
+  "debug tracing" "                                  " 3
+at_xfail=no
+(
+  $as_echo "23. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >a.c <<'_ATEOF'
+int a () { return 0; }
+_ATEOF
+
+
+cat >b.c <<'_ATEOF'
+extern int a ();
+int b () { return a (); }
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+extern int b ();
+int main () { return b (); }
+_ATEOF
+
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+mkdir $inst $libdir $bindir
+
+# This test will not work correctly if --debug is passed.
+{ set +x
+$as_echo "$at_srcdir/help.at:119: case \"\$LIBTOOL \$CC \$CPPFLAGS \$CFLAGS \$LDFLAGS \" in 	   *\\ --debug\\ *) exit 77;; *) :;; esac"
+at_fn_check_prepare_dynamic "case \"$LIBTOOL $CC $CPPFLAGS $CFLAGS $LDFLAGS \" in 	   *\\ --debug\\ *) exit 77;; *) :;; esac" "help.at:119"
+( $at_check_trace; case "$LIBTOOL $CC $CPPFLAGS $CFLAGS $LDFLAGS " in 	   *\ --debug\ *) exit 77;; *) :;; esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:119"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+check_trace ()
+{
+  if test "X$trace" = X--debug; then
+    { set +x
+$as_echo "$at_srcdir/help.at:125: grep 'enabling shell trace mode' stdout stderr"
+at_fn_check_prepare_trace "help.at:125"
+( $at_check_trace; grep 'enabling shell trace mode' stdout stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:125"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/help.at:126: grep ' --mode' stderr"
+at_fn_check_prepare_trace "help.at:126"
+( $at_check_trace; grep ' --mode' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:126"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  else
+    { set +x
+$as_echo "$at_srcdir/help.at:128: grep 'enabling shell trace mode' stdout stderr"
+at_fn_check_prepare_trace "help.at:128"
+( $at_check_trace; grep 'enabling shell trace mode' stdout stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/help.at:128"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/help.at:129: grep ' --mode' stderr"
+at_fn_check_prepare_trace "help.at:129"
+( $at_check_trace; grep ' --mode' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/help.at:129"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  fi
+}
+
+orig_LIBTOOL=$LIBTOOL
+for trace in '' --debug; do
+  LIBTOOL="$orig_LIBTOOL $trace"
+
+  # Hypothesis: debug output should happen if (and only if) --debug is
+  # passed, for compile, link, install, uninstall, and clean modes.
+  { set +x
+$as_echo "$at_srcdir/help.at:139: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c a.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c" "help.at:139"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:139"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+  { set +x
+$as_echo "$at_srcdir/help.at:142: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c b.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c b.c" "help.at:142"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c b.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:142"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+  { set +x
+$as_echo "$at_srcdir/help.at:145: \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c main.c" "help.at:145"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:145"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/help.at:146: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la a.lo 	    -no-undefined -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo 	    -no-undefined -rpath $libdir" "help.at:146"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo 	    -no-undefined -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:146"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+  { set +x
+$as_echo "$at_srcdir/help.at:149: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libb.la b.lo 	    -no-undefined -rpath \$libdir liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la b.lo 	    -no-undefined -rpath $libdir liba.la" "help.at:149"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la b.lo 	    -no-undefined -rpath $libdir liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:149"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+  { set +x
+$as_echo "$at_srcdir/help.at:152: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT 	   libb.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT 	   libb.la" "help.at:152"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT 	   libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:152"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/help.at:155: if \$LIBTOOL --mode=execute  \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=execute  \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "help.at:155"
+( $at_check_trace; if $LIBTOOL --mode=execute  "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:155"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  check_trace
+
+  { set +x
+$as_echo "$at_srcdir/help.at:158: \$LIBTOOL --mode=install cp liba.la libb.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba.la libb.la $libdir" "help.at:158"
+( $at_check_trace; $LIBTOOL --mode=install cp liba.la libb.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:158"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+
+  # Hypothesis: --debug should be passed to relink mode if (and only if)
+  # it was passed at link mode.
+  { set +x
+$as_echo "$at_srcdir/help.at:164: \$orig_LIBTOOL --mode=install \$lt_INSTALL liba.la libb.la \$libdir"
+at_fn_check_prepare_dynamic "$orig_LIBTOOL --mode=install $lt_INSTALL liba.la libb.la $libdir" "help.at:164"
+( $at_check_trace; $orig_LIBTOOL --mode=install $lt_INSTALL liba.la libb.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:164"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  if grep ': relinking ' stdout stderr; then
+    if test "X$trace" = X--debug; then
+      { set +x
+$as_echo "$at_srcdir/help.at:168: grep ' --mode=relink' stdout stderr | grep ' --debug '"
+at_fn_check_prepare_notrace 'a shell pipeline' "help.at:168"
+( $at_check_trace; grep ' --mode=relink' stdout stderr | grep ' --debug '
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:168"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    else
+      { set +x
+$as_echo "$at_srcdir/help.at:171: grep ' --mode=relink' stdout stderr | grep ' --debug '"
+at_fn_check_prepare_notrace 'a shell pipeline' "help.at:171"
+( $at_check_trace; grep ' --mode=relink' stdout stderr | grep ' --debug '
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/help.at:171"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    fi
+  fi
+
+  { set +x
+$as_echo "$at_srcdir/help.at:176: \$LIBTOOL --mode=install cp main\$EXEEXT \$bindir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp main$EXEEXT $bindir" "help.at:176"
+( $at_check_trace; $LIBTOOL --mode=install cp main$EXEEXT $bindir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:176"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+  { set +x
+$as_echo "$at_srcdir/help.at:179: \$LIBTOOL --mode=finish \$bindir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=finish $bindir" "help.at:179"
+( $at_check_trace; $LIBTOOL --mode=finish $bindir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:179"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+
+  { set +x
+$as_echo "$at_srcdir/help.at:182: \$LIBTOOL --mode=uninstall rm -f \$bindir/main\$EXEEXT 	   \$libdir/libb.la \$libdir/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=uninstall rm -f $bindir/main$EXEEXT 	   $libdir/libb.la $libdir/liba.la" "help.at:182"
+( $at_check_trace; $LIBTOOL --mode=uninstall rm -f $bindir/main$EXEEXT 	   $libdir/libb.la $libdir/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:182"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+  { set +x
+$as_echo "$at_srcdir/help.at:185: \$LIBTOOL --mode=clean rm -f \$bindir/main\$EXEEXT 	   \$libdir/libb.la \$libdir/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f $bindir/main$EXEEXT 	   $libdir/libb.la $libdir/liba.la" "help.at:185"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f $bindir/main$EXEEXT 	   $libdir/libb.la $libdir/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/help.at:185"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  check_trace
+
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_23
+#AT_START_24
+at_fn_group_banner 24 'duplicate_members.at:25' \
+  "duplicate members in archive tests" "             " 3
+at_xfail=no
+(
+  $as_echo "24. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# we don't want to use whole_archive_flag_spec, even if available
+sed -e 's|^whole_archive_flag_spec=.*|whole_archive_flag_spec=|g' < $LIBTOOL > libtool
+
+chmod +x ./libtool
+LIBTOOL=./libtool
+
+cat >bar.c <<'_ATEOF'
+extern int foo1 (), foo2 (), foo3 (), foo4 (), foo5 (), foo6 ();
+int bar() {
+    int result = foo1 () + foo2 () + foo3 () + foo4 () + foo5 () + foo6 ();
+    return result;
+}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+int bar();
+int main()
+{
+if (bar() == 21) return 0;
+return 1;
+}
+_ATEOF
+
+
+
+for a in 1 2 3 4 5 6
+do
+  mkdir $a
+  echo "int foo$a() {return $a;}" > $a/a.c
+done
+
+
+for a in 1 2 3 4 5 6
+do
+  $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o $a/a.lo $a/a.c
+done
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libc0.la 6/a.lo
+{ set +x
+$as_echo "$at_srcdir/duplicate_members.at:64: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o libconv.la 	 1/a.lo 2/a.lo 3/a.lo 4/a.lo 5/a.lo libc0.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libconv.la 	 1/a.lo 2/a.lo 3/a.lo 4/a.lo 5/a.lo libc0.la" "duplicate_members.at:64"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libconv.la 	 1/a.lo 2/a.lo 3/a.lo 4/a.lo 5/a.lo libc0.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_members.at:64"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o bar.lo bar.c
+{ set +x
+$as_echo "$at_srcdir/duplicate_members.at:68: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o libbar.la 	  bar.lo libconv.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbar.la 	  bar.lo libconv.la -rpath /notexist" "duplicate_members.at:68"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbar.la 	  bar.lo libconv.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_members.at:68"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o main.lo main.c
+{ set +x
+$as_echo "$at_srcdir/duplicate_members.at:72: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT 	 main.lo ./libbar.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o main$EXEEXT 	 main.lo ./libbar.la" "duplicate_members.at:72"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o main$EXEEXT 	 main.lo ./libbar.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_members.at:72"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/duplicate_members.at:75: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "duplicate_members.at:75"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_members.at:75"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_24
+#AT_START_25
+at_fn_group_banner 25 'duplicate_conv.at:25' \
+  "duplicate convenience archive names" "            " 3
+at_xfail=no
+(
+  $as_echo "25. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+eval `$LIBTOOL --config | sed -n '/^reload_cmds=/,/^$/p'`
+
+# We create two convenience archives with the same name, and _also_
+# containing an object with the same name.  This is necessary to detect
+# the failure with both 1.5.22 and HEAD, since the latter does not (did
+# not?) remove the temporary output directory, thus masking the failure
+# when all objects have distinct names.
+
+mkdir a b c
+
+echo 'int a () { return 0; }' > a/a.c
+echo 'int a2() { return 0; }' > b/a.c
+echo 'int b () { return 0; }' > b/b.c
+echo 'extern int a(), a2(), b(); int c() { return a() + a2() + b(); }' > c.c
+echo 'extern int c(); int main() { return c(); }' > main.c
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a/a.c -o a/a.lo
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c b/a.c -o b/a.lo
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c b/b.c -o b/b.lo
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c c.c
+$CC $CPPFLAGS $CFLAGS -c main.c
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o a/liba.la a/a.lo
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o b/liba.la b/a.lo b/b.lo
+
+# Fold into convenience archive.
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:53: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o libcee.la c.lo a/liba.la b/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libcee.la c.lo a/liba.la b/liba.la" "duplicate_conv.at:53"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libcee.la c.lo a/liba.la b/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:53"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:55: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT ./libcee.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la" "duplicate_conv.at:55"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:55"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:57: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "duplicate_conv.at:57"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:57"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+$LIBTOOL --mode=clean rm -f libcee.la
+
+
+# FIXME: For this test, we may want to zero out whole_archive_flag_spec;
+#        OTOH, we'd like to test the other situation, too.
+
+# Fold into static library.
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:65: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -rpath /foo -static -o libcee.la c.lo a/liba.la b/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -rpath /foo -static -o libcee.la c.lo a/liba.la b/liba.la" "duplicate_conv.at:65"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -rpath /foo -static -o libcee.la c.lo a/liba.la b/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:65"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:67: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT ./libcee.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la" "duplicate_conv.at:67"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:67"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:69: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "duplicate_conv.at:69"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:69"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+$LIBTOOL --mode=clean rm -f libcee.la
+
+# Fold into library.
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:73: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -rpath /foo -o libcee.la c.lo a/liba.la b/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -rpath /foo -o libcee.la c.lo a/liba.la b/liba.la" "duplicate_conv.at:73"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -rpath /foo -o libcee.la c.lo a/liba.la b/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:73"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:75: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT ./libcee.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la" "duplicate_conv.at:75"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT ./libcee.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:75"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:77: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "duplicate_conv.at:77"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:77"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+$LIBTOOL --mode=clean rm -f libcee.la
+
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:80: test \"x\$reload_cmds\" = xfalse && exit 77"
+at_fn_check_prepare_dynamic "test \"x$reload_cmds\" = xfalse && exit 77" "duplicate_conv.at:80"
+( $at_check_trace; test "x$reload_cmds" = xfalse && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/duplicate_conv.at:80"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Test whether this works with reloadable objects as well.
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:83: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o cee.\$OBJEXT c.lo a/liba.la b/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o cee.$OBJEXT c.lo a/liba.la b/liba.la" "duplicate_conv.at:83"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o cee.$OBJEXT c.lo a/liba.la b/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:83"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:85: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT cee.\$OBJEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT cee.$OBJEXT" "duplicate_conv.at:85"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT cee.$OBJEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/duplicate_conv.at:87: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "duplicate_conv.at:87"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_conv.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# TODO: test dlpreloading of duplicates (when it is implemented)
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_25
+#AT_START_26
+at_fn_group_banner 26 'duplicate_deps.at:25' \
+  "preserve duplicate convenience deps" "            " 3
+at_xfail=yes
+(
+  $as_echo "26. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# --preserve-dup-deps should work for convenience archives.
+
+# Create a circular dependency of liba and libb:
+# a1 pulls in b1, that pulls in a2.
+cat >a1.c <<\EOF
+extern int b1 ();
+int a1 () { return b1 (); }
+EOF
+cat >a2.c <<\EOF
+int a2 () { return 0; }
+EOF
+cat >b1.c <<\EOF
+extern int a2 ();
+int b1 () { return a2 (); }
+EOF
+cat >main.c <<\EOF
+extern int a1 ();
+int main () { return a1 (); }
+EOF
+
+for file in a1.c a2.c b1.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+$CC $CPPFLAGS $CFLAGS -c main.c
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o liba.la a1.lo a2.lo
+
+# This could be worked around by adding liba.la to libb.la
+# (in that case all objects from liba would be merged into
+# libb.a as well, possibly renamed.)
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libb.la b1.lo liba.la
+{ set +x
+$as_echo "$at_srcdir/duplicate_deps.at:58: \$LIBTOOL --mode=link --tag=CC \\
+	  \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT liba.la libb.la"
+at_fn_check_prepare_notrace 'an embedded newline' "duplicate_deps.at:58"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC \
+	  $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_deps.at:58"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/duplicate_deps.at:61: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "duplicate_deps.at:61"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_deps.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# Forgo the workaround and create a true circular dependency.
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libb.la b1.lo
+# Some systems find all symbols anyway; skip this test on such systems.
+{ set +x
+$as_echo "$at_srcdir/duplicate_deps.at:66: \$LIBTOOL --mode=link --tag=CC \\
+	  \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT liba.la libb.la liba.la \\
+	  && exit 77"
+at_fn_check_prepare_notrace 'an embedded newline' "duplicate_deps.at:66"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC \
+	  $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la libb.la liba.la \
+	  && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/duplicate_deps.at:66"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# Other systems need special treatment, which currently fails.
+
+{ set +x
+$as_echo "$at_srcdir/duplicate_deps.at:72: \$LIBTOOL --mode=link --preserve-dup-deps --tag=CC \\
+	  \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT liba.la libb.la liba.la"
+at_fn_check_prepare_notrace 'an embedded newline' "duplicate_deps.at:72"
+( $at_check_trace; $LIBTOOL --mode=link --preserve-dup-deps --tag=CC \
+	  $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la libb.la liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/duplicate_deps.at:72"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_26
+#AT_START_27
+at_fn_group_banner 27 'flags.at:24' \
+  "passing CC flags through libtool" "               " 3
+at_xfail=no
+(
+  $as_echo "27. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: { test -n \"\$CC\" && test \"X\$CC\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$CC\" && test \"X$CC\" != Xno; } || (exit 77)" "flags.at:24"
+( $at_check_trace; { test -n "$CC" && test "X$CC" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+eval "`$LIBTOOL --config | $EGREP '^(FGREP)='`"
+
+cat >a.c <<'_ATEOF'
+int main () { return 0; }
+_ATEOF
+
+compile="$CC $CPPFLAGS $CFLAGS" link="$CC $CFLAGS $LDFLAGS" source=a.c
+
+
+# Linker flags are not passed to the archiver, so don't test static libraries.
+if $LIBTOOL --features | grep 'enable shared libraries'; then
+  library_and_module='library.la "module.la -module -avoid-version"'
+else
+  library_and_module=
+fi
+
+eval "`$LIBTOOL --tag=CC --config | $EGREP '^(wl|archive_cmds)='`"
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL --tag=CC --mode=compile \$compile -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CC --mode=compile $compile -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL --tag=CC --mode=compile $compile -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Linker flags are prefixed with ${wl} iff they are passed to the
+# compiler driver, instead of directly to the linker.
+case $archive_cmds in
+*\$LD*\$linker_flags*) maybe_wl= compiler_flags_in_liblink=false ;;
+*) maybe_wl=$wl compiler_flags_in_liblink=: ;;
+esac
+
+for flag in -Wc, -Wl, '-Xcompiler ' '-Xlinker '; do
+  case $flag in
+  -Wc, | -Xcompiler\ )
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=CC --mode=compile \$compile 	     \$flag-foo -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=CC --mode=compile $compile 	     $flag-foo -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=CC --mode=compile $compile 	     $flag-foo -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" -foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" -foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " -foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    flag_prefix_prog=
+    flag_prefix_lib=
+    flags_in_liblink=$compiler_flags_in_liblink
+    ;;
+  -Wl, | -Xlinker\ )
+    flag_prefix_prog=$wl
+    flag_prefix_lib=$maybe_wl
+    flags_in_liblink=:
+    ;;
+  esac
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=CC --mode=link \$link 	   -o program\$EXEEXT a.lo \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=CC --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=CC --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_prog-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_prog-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_prog-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  eval set x "$library_and_module"
+  for output
+  do
+    test x = "$output" && continue
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=CC --mode=link \$link 	     -o \$output a.lo -rpath /nowhere \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=CC --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=CC --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    if $flags_in_liblink; then
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    else
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    fi
+  done
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_27
+#AT_START_28
+at_fn_group_banner 28 'flags.at:24' \
+  "passing CXX flags through libtool" "              " 3
+at_xfail=no
+(
+  $as_echo "28. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: { test -n \"\$CXX\" && test \"X\$CXX\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$CXX\" && test \"X$CXX\" != Xno; } || (exit 77)" "flags.at:24"
+( $at_check_trace; { test -n "$CXX" && test "X$CXX" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: test \"X\$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)"
+at_fn_check_prepare_dynamic "test \"X$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)" "flags.at:24"
+( $at_check_trace; test "X$CXX" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+eval "`$LIBTOOL --config | $EGREP '^(FGREP)='`"
+
+cat >a.cpp <<'_ATEOF'
+int main () { return 0; }
+_ATEOF
+
+compile="$CXX $CPPFLAGS $CXXFLAGS" link="$CXX $CXXFLAGS $LDFLAGS" source=a.cpp
+
+
+# Linker flags are not passed to the archiver, so don't test static libraries.
+if $LIBTOOL --features | grep 'enable shared libraries'; then
+  library_and_module='library.la "module.la -module -avoid-version"'
+else
+  library_and_module=
+fi
+
+eval "`$LIBTOOL --tag=CXX --config | $EGREP '^(wl|archive_cmds)='`"
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL --tag=CXX --mode=compile \$compile -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=compile $compile -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=compile $compile -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Linker flags are prefixed with ${wl} iff they are passed to the
+# compiler driver, instead of directly to the linker.
+case $archive_cmds in
+*\$LD*\$linker_flags*) maybe_wl= compiler_flags_in_liblink=false ;;
+*) maybe_wl=$wl compiler_flags_in_liblink=: ;;
+esac
+
+for flag in -Wc, -Wl, '-Xcompiler ' '-Xlinker '; do
+  case $flag in
+  -Wc, | -Xcompiler\ )
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=CXX --mode=compile \$compile 	     \$flag-foo -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=CXX --mode=compile $compile 	     $flag-foo -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=CXX --mode=compile $compile 	     $flag-foo -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" -foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" -foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " -foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    flag_prefix_prog=
+    flag_prefix_lib=
+    flags_in_liblink=$compiler_flags_in_liblink
+    ;;
+  -Wl, | -Xlinker\ )
+    flag_prefix_prog=$wl
+    flag_prefix_lib=$maybe_wl
+    flags_in_liblink=:
+    ;;
+  esac
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=CXX --mode=link \$link 	   -o program\$EXEEXT a.lo \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=CXX --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=CXX --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_prog-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_prog-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_prog-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  eval set x "$library_and_module"
+  for output
+  do
+    test x = "$output" && continue
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=CXX --mode=link \$link 	     -o \$output a.lo -rpath /nowhere \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=CXX --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=CXX --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    if $flags_in_liblink; then
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    else
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    fi
+  done
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_28
+#AT_START_29
+at_fn_group_banner 29 'flags.at:24' \
+  "passing F77 flags through libtool" "              " 3
+at_xfail=no
+(
+  $as_echo "29. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: { test -n \"\$F77\" && test \"X\$F77\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$F77\" && test \"X$F77\" != Xno; } || (exit 77)" "flags.at:24"
+( $at_check_trace; { test -n "$F77" && test "X$F77" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+eval "`$LIBTOOL --config | $EGREP '^(FGREP)='`"
+
+cat >a.f <<'_ATEOF'
+      program main
+      end
+_ATEOF
+
+compile="$F77 $FFLAGS" link="$F77 $FFLAGS $LDFLAGS" source=a.f
+
+
+# Linker flags are not passed to the archiver, so don't test static libraries.
+if $LIBTOOL --features | grep 'enable shared libraries'; then
+  library_and_module='library.la "module.la -module -avoid-version"'
+else
+  library_and_module=
+fi
+
+eval "`$LIBTOOL --tag=F77 --config | $EGREP '^(wl|archive_cmds)='`"
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL --tag=F77 --mode=compile \$compile -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=F77 --mode=compile $compile -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL --tag=F77 --mode=compile $compile -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Linker flags are prefixed with ${wl} iff they are passed to the
+# compiler driver, instead of directly to the linker.
+case $archive_cmds in
+*\$LD*\$linker_flags*) maybe_wl= compiler_flags_in_liblink=false ;;
+*) maybe_wl=$wl compiler_flags_in_liblink=: ;;
+esac
+
+for flag in -Wc, -Wl, '-Xcompiler ' '-Xlinker '; do
+  case $flag in
+  -Wc, | -Xcompiler\ )
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=F77 --mode=compile \$compile 	     \$flag-foo -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=F77 --mode=compile $compile 	     $flag-foo -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=F77 --mode=compile $compile 	     $flag-foo -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" -foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" -foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " -foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    flag_prefix_prog=
+    flag_prefix_lib=
+    flags_in_liblink=$compiler_flags_in_liblink
+    ;;
+  -Wl, | -Xlinker\ )
+    flag_prefix_prog=$wl
+    flag_prefix_lib=$maybe_wl
+    flags_in_liblink=:
+    ;;
+  esac
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=F77 --mode=link \$link 	   -o program\$EXEEXT a.lo \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=F77 --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=F77 --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_prog-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_prog-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_prog-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  eval set x "$library_and_module"
+  for output
+  do
+    test x = "$output" && continue
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=F77 --mode=link \$link 	     -o \$output a.lo -rpath /nowhere \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=F77 --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=F77 --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    if $flags_in_liblink; then
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    else
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    fi
+  done
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_29
+#AT_START_30
+at_fn_group_banner 30 'flags.at:24' \
+  "passing FC flags through libtool" "               " 3
+at_xfail=no
+(
+  $as_echo "30. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: { test -n \"\$FC\" && test \"X\$FC\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$FC\" && test \"X$FC\" != Xno; } || (exit 77)" "flags.at:24"
+( $at_check_trace; { test -n "$FC" && test "X$FC" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+eval "`$LIBTOOL --config | $EGREP '^(FGREP)='`"
+
+cat >a.f90 <<'_ATEOF'
+      program main
+      end
+_ATEOF
+
+compile="$FC $FCFLAGS" link="$FC $FCFLAGS $LDFLAGS" source=a.f90
+
+
+# Linker flags are not passed to the archiver, so don't test static libraries.
+if $LIBTOOL --features | grep 'enable shared libraries'; then
+  library_and_module='library.la "module.la -module -avoid-version"'
+else
+  library_and_module=
+fi
+
+eval "`$LIBTOOL --tag=FC --config | $EGREP '^(wl|archive_cmds)='`"
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL --tag=FC --mode=compile \$compile -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=FC --mode=compile $compile -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL --tag=FC --mode=compile $compile -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Linker flags are prefixed with ${wl} iff they are passed to the
+# compiler driver, instead of directly to the linker.
+case $archive_cmds in
+*\$LD*\$linker_flags*) maybe_wl= compiler_flags_in_liblink=false ;;
+*) maybe_wl=$wl compiler_flags_in_liblink=: ;;
+esac
+
+for flag in -Wc, -Wl, '-Xcompiler ' '-Xlinker '; do
+  case $flag in
+  -Wc, | -Xcompiler\ )
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=FC --mode=compile \$compile 	     \$flag-foo -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=FC --mode=compile $compile 	     $flag-foo -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=FC --mode=compile $compile 	     $flag-foo -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" -foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" -foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " -foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    flag_prefix_prog=
+    flag_prefix_lib=
+    flags_in_liblink=$compiler_flags_in_liblink
+    ;;
+  -Wl, | -Xlinker\ )
+    flag_prefix_prog=$wl
+    flag_prefix_lib=$maybe_wl
+    flags_in_liblink=:
+    ;;
+  esac
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=FC --mode=link \$link 	   -o program\$EXEEXT a.lo \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=FC --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=FC --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_prog-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_prog-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_prog-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  eval set x "$library_and_module"
+  for output
+  do
+    test x = "$output" && continue
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=FC --mode=link \$link 	     -o \$output a.lo -rpath /nowhere \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=FC --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=FC --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    if $flags_in_liblink; then
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    else
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    fi
+  done
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_30
+#AT_START_31
+at_fn_group_banner 31 'flags.at:24' \
+  "passing GCJ flags through libtool" "              " 3
+at_xfail=no
+(
+  $as_echo "31. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: { test -n \"\$GCJ\" && test \"X\$GCJ\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$GCJ\" && test \"X$GCJ\" != Xno; } || (exit 77)" "flags.at:24"
+( $at_check_trace; { test -n "$GCJ" && test "X$GCJ" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# There are just too many broken gcj installations out there, either missing
+   # libgcj.spec or unable to find it.  Skip the test for them.
+   cat >gcj_test.java <<'_ATEOF'
+public class gcj_test {
+    public static void main(String[] argv) { }
+  }
+_ATEOF
+
+   { set +x
+$as_echo "$at_srcdir/flags.at:24: \$GCJ \$GCJFLAGS -c gcj_test.java || exit 77"
+at_fn_check_prepare_dynamic "$GCJ $GCJFLAGS -c gcj_test.java || exit 77" "flags.at:24"
+( $at_check_trace; $GCJ $GCJFLAGS -c gcj_test.java || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+eval "`$LIBTOOL --config | $EGREP '^(FGREP)='`"
+
+cat >a.java <<'_ATEOF'
+class a {}
+_ATEOF
+
+compile="$GCJ $GCJFLAGS" link="$GCJ $GCJFLAGS $LDFLAGS" source=a.java
+
+
+# Linker flags are not passed to the archiver, so don't test static libraries.
+if $LIBTOOL --features | grep 'enable shared libraries'; then
+  library_and_module='library.la "module.la -module -avoid-version"'
+else
+  library_and_module=
+fi
+
+eval "`$LIBTOOL --tag=GCJ --config | $EGREP '^(wl|archive_cmds)='`"
+
+{ set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL --tag=GCJ --mode=compile \$compile -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=GCJ --mode=compile $compile -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL --tag=GCJ --mode=compile $compile -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Linker flags are prefixed with ${wl} iff they are passed to the
+# compiler driver, instead of directly to the linker.
+case $archive_cmds in
+*\$LD*\$linker_flags*) maybe_wl= compiler_flags_in_liblink=false ;;
+*) maybe_wl=$wl compiler_flags_in_liblink=: ;;
+esac
+
+for flag in -Wc, -Wl, '-Xcompiler ' '-Xlinker '; do
+  case $flag in
+  -Wc, | -Xcompiler\ )
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=GCJ --mode=compile \$compile 	     \$flag-foo -c \$source"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=GCJ --mode=compile $compile 	     $flag-foo -c $source" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=GCJ --mode=compile $compile 	     $flag-foo -c $source
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" -foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" -foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " -foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    flag_prefix_prog=
+    flag_prefix_lib=
+    flags_in_liblink=$compiler_flags_in_liblink
+    ;;
+  -Wl, | -Xlinker\ )
+    flag_prefix_prog=$wl
+    flag_prefix_lib=$maybe_wl
+    flags_in_liblink=:
+    ;;
+  esac
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=GCJ --mode=link \$link 	   -o program\$EXEEXT a.lo \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=GCJ --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=GCJ --mode=link $link 	   -o program$EXEEXT a.lo $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_prog-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_prog-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_prog-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  eval set x "$library_and_module"
+  for output
+  do
+    test x = "$output" && continue
+    { set +x
+$as_echo "$at_srcdir/flags.at:24: \$LIBTOOL -n --tag=GCJ --mode=link \$link 	     -o \$output a.lo -rpath /nowhere \$flag-foo"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --tag=GCJ --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo" "flags.at:24"
+( $at_check_trace; $LIBTOOL -n --tag=GCJ --mode=link $link 	     -o $output a.lo -rpath /nowhere $flag-foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    if $flags_in_liblink; then
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    else
+      { set +x
+$as_echo "$at_srcdir/flags.at:24: \$FGREP \" \$flag_prefix_lib-foo\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \" $flag_prefix_lib-foo\" stdout" "flags.at:24"
+( $at_check_trace; $FGREP " $flag_prefix_lib-foo" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/flags.at:24"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    fi
+  done
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_31
+#AT_START_32
+at_fn_group_banner 32 'inherited_flags.at:26' \
+  "inherited_linker_flags" "                         " 3
+at_xfail=no
+(
+  $as_echo "32. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >foo.c <<'_ATEOF'
+
+int foo() { return 1;}
+_ATEOF
+
+
+cat >bar.c <<'_ATEOF'
+
+int bar() { return 1;}
+_ATEOF
+
+
+cat >baz.c <<'_ATEOF'
+
+int baz() { return 1;}
+_ATEOF
+
+
+cat >both.c <<'_ATEOF'
+
+int both() { return 1;}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+
+int main() { return 0;}
+_ATEOF
+
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o foo.lo foo.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o bar.lo bar.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o baz.lo baz.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o both.lo both.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o main.lo main.c
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libfoo.la foo.lo -rpath /nonexistent -no-undefined
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbar.la bar.lo -rpath /nonexistent -no-undefined
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libboth.la both.lo -rpath /nonexistent -no-undefined
+
+
+mv libfoo.la libfoo.la.bak
+sed -e 's/^inherited_linker_flags.*/inherited_linker_flags=-llt_inlikely_existing_lib/g' < libfoo.la.bak > libfoo.la
+rm libfoo.la.bak
+
+mv libbar.la libbar.la.bak
+sed -e 's/^inherited_linker_flags.*/inherited_linker_flags=-llt_unlikely_existing_lib/g' < libbar.la.bak > libbar.la
+rm libbar.la.bak
+
+mv libboth.la libboth.la.bak
+sed -e "s/^inherited_linker_flags.*/inherited_linker_flags='-llt_inlikely_existing_lib -llt_unlikely_existing_lib'/g" < libboth.la.bak > libboth.la
+rm libboth.la.bak
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:76: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o libbaz.la baz.lo -no-undefined -rpath /nonexistent ./libfoo.la ./libbar.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbaz.la baz.lo -no-undefined -rpath /nonexistent ./libfoo.la ./libbar.la" "inherited_flags.at:76"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbaz.la baz.lo -no-undefined -rpath /nonexistent ./libfoo.la ./libbar.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/inherited_flags.at:76"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# We used to grep for
+# 'llt_[[ui]]nlikely_existing_lib.*llt_[[ui]]nlikely_existing_lib'
+# here.  This fails on win32/MSVC because the generated command lines have a
+# different syntax.  So drop the first `l'.
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:82: \$LIBTOOL --features | grep 'disable shared libraries' && (exit 77)"
+at_fn_check_prepare_notrace 'a shell pipeline' "inherited_flags.at:82"
+( $at_check_trace; $LIBTOOL --features | grep 'disable shared libraries' && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/inherited_flags.at:82"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:83: grep 'lt_[ui]nlikely_existing_lib.*lt_[ui]nlikely_existing_lib' stdout"
+at_fn_check_prepare_trace "inherited_flags.at:83"
+( $at_check_trace; grep 'lt_[ui]nlikely_existing_lib.*lt_[ui]nlikely_existing_lib' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/inherited_flags.at:83"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:85: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.lo -no-undefined -rpath /nonexistent  ./libfoo.la ./libbar.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.lo -no-undefined -rpath /nonexistent  ./libfoo.la ./libbar.la" "inherited_flags.at:85"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.lo -no-undefined -rpath /nonexistent  ./libfoo.la ./libbar.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/inherited_flags.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:87: grep 'lt_[ui]nlikely_existing_lib.*lt_[ui]nlikely_existing_lib' stdout"
+at_fn_check_prepare_trace "inherited_flags.at:87"
+( $at_check_trace; grep 'lt_[ui]nlikely_existing_lib.*lt_[ui]nlikely_existing_lib' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/inherited_flags.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# now check for duplicates
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:91: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o libbaz.la baz.lo -no-undefined -rpath /nonexistent ./libfoo.la ./libbar.la ./libboth.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbaz.la baz.lo -no-undefined -rpath /nonexistent ./libfoo.la ./libbar.la ./libboth.la" "inherited_flags.at:91"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libbaz.la baz.lo -no-undefined -rpath /nonexistent ./libfoo.la ./libbar.la ./libboth.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/inherited_flags.at:91"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:93: grep 'lt_inlikely_existing_lib.*lt_inlikely_existing_lib' stdout"
+at_fn_check_prepare_trace "inherited_flags.at:93"
+( $at_check_trace; grep 'lt_inlikely_existing_lib.*lt_inlikely_existing_lib' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/inherited_flags.at:93"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:95: grep 'lt_unlikely_existing_lib.*lt_unlikely_existing_lib' stdout"
+at_fn_check_prepare_trace "inherited_flags.at:95"
+( $at_check_trace; grep 'lt_unlikely_existing_lib.*lt_unlikely_existing_lib' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/inherited_flags.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:97: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.lo -no-undefined -rpath /nonexistent  ./libfoo.la ./libbar.la ./libboth.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.lo -no-undefined -rpath /nonexistent  ./libfoo.la ./libbar.la ./libboth.la" "inherited_flags.at:97"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.lo -no-undefined -rpath /nonexistent  ./libfoo.la ./libbar.la ./libboth.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/inherited_flags.at:97"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:99: grep 'lt_inlikely_existing_lib.*lt_inlikely_existing_lib' stdout"
+at_fn_check_prepare_trace "inherited_flags.at:99"
+( $at_check_trace; grep 'lt_inlikely_existing_lib.*lt_inlikely_existing_lib' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/inherited_flags.at:99"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:101: grep 'lt_unlikely_existing_lib.*lt_unlikely_existing_lib' stdout"
+at_fn_check_prepare_trace "inherited_flags.at:101"
+( $at_check_trace; grep 'lt_unlikely_existing_lib.*lt_unlikely_existing_lib' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/inherited_flags.at:101"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+mv libboth.la libboth.la.bak
+sed "s/^inherited_linker_flags.*/inherited_linker_flags='-framework Cocoa -framework ApplicationServices'/" < libboth.la.bak > libboth.la
+rm libboth.la.bak
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:108: \$LIBTOOL -n --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -framework Cocoa -framework ApplicationServices -o libbaz.la baz.lo libboth.la -no-undefined -rpath /nonexistent"
+at_fn_check_prepare_dynamic "$LIBTOOL -n --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -framework Cocoa -framework ApplicationServices -o libbaz.la baz.lo libboth.la -no-undefined -rpath /nonexistent" "inherited_flags.at:108"
+( $at_check_trace; $LIBTOOL -n --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -framework Cocoa -framework ApplicationServices -o libbaz.la baz.lo libboth.la -no-undefined -rpath /nonexistent
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/inherited_flags.at:108"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:110: grep Cocoa.ltframework stdout"
+at_fn_check_prepare_trace "inherited_flags.at:110"
+( $at_check_trace; grep Cocoa.ltframework stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/inherited_flags.at:110"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/inherited_flags.at:111: grep ' -framework Cocoa' stdout"
+at_fn_check_prepare_trace "inherited_flags.at:111"
+( $at_check_trace; grep ' -framework Cocoa' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/inherited_flags.at:111"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_32
+#AT_START_33
+at_fn_group_banner 33 'convenience.at:31' \
+  "C convenience archives" "                         " 3
+at_xfail=no
+(
+  $as_echo "33. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >main1.c <<EOF
+extern int a1(void);
+int main(void) { return a1() != 1; }
+EOF
+cat >main2.c <<EOF
+extern int a1(void), a2(void);
+int main(void) { return a1() + a2() != 3; }
+EOF
+cat >main3.c <<EOF
+extern int a1(void), a2(void), a3(void);
+int main(void) { return a1() + a2() + a3() != 6; }
+EOF
+for i in 1 2 3; do
+  echo "int a$i(void) { return $i; }" > a$i.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c main$i.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a$i.c
+  $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la a$i.lo
+done
+{ set +x
+$as_echo "$at_srcdir/convenience.at:52: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist" "convenience.at:52"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:52"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:54: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist" "convenience.at:54"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:54"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  { set +x
+$as_echo "$at_srcdir/convenience.at:60: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -static -o main_static\$EXEEXT main\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la" "convenience.at:60"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:60"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/convenience.at:62: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la" "convenience.at:62"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:62"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./main_static; if test -f "./main_static$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:64: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:64"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:64"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:65: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:65"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:65"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_33
+#AT_START_34
+at_fn_group_banner 34 'convenience.at:70' \
+  "C++ convenience archives" "                       " 3
+at_xfail=no
+(
+  $as_echo "34. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:71: { test -n \"\$CXX\" && test \"X\$CXX\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$CXX\" && test \"X$CXX\" != Xno; } || (exit 77)" "convenience.at:71"
+( $at_check_trace; { test -n "$CXX" && test "X$CXX" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:71"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:71: test \"X\$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)"
+at_fn_check_prepare_dynamic "test \"X$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)" "convenience.at:71"
+( $at_check_trace; test "X$CXX" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:71"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+cat >main1.cpp <<EOF
+extern int a1(void);
+int main(void) { return a1() != 1; }
+EOF
+cat >main2.cpp <<EOF
+extern int a1(void), a2(void);
+int main(void) { return a1() + a2() != 3; }
+EOF
+cat >main3.cpp <<EOF
+extern int a1(void), a2(void), a3(void);
+int main(void) { return a1() + a2() + a3() != 6; }
+EOF
+for i in 1 2 3; do
+  echo "int a$i(void) { return $i; }" > a$i.cpp
+  $LIBTOOL --tag=CXX --mode=compile $CXX $CXXFLAGS -c main$i.cpp
+  $LIBTOOL --tag=CXX --mode=compile $CXX $CXXFLAGS -c a$i.cpp
+  $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o liba$i.la a$i.lo
+done
+{ set +x
+$as_echo "$at_srcdir/convenience.at:92: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist" "convenience.at:92"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:92"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:94: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist" "convenience.at:94"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:94"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  { set +x
+$as_echo "$at_srcdir/convenience.at:100: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -static -o main_static\$EXEEXT main\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la" "convenience.at:100"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:100"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/convenience.at:102: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o main\$EXEEXT main\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la" "convenience.at:102"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:102"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./main_static; if test -f "./main_static$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:104: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:104"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:104"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:105: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:105"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:105"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_34
+#AT_START_35
+at_fn_group_banner 35 'convenience.at:110' \
+  "F77 convenience archives" "                       " 3
+at_xfail=no
+(
+  $as_echo "35. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:111: { test -n \"\$F77\" && test \"X\$F77\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$F77\" && test \"X$F77\" != Xno; } || (exit 77)" "convenience.at:111"
+( $at_check_trace; { test -n "$F77" && test "X$F77" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:111"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+cat >main1.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      end
+EOF
+cat >main2.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      call a2(res)
+      end
+EOF
+cat >main3.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      call a2(res)
+      call a3(res)
+      end
+EOF
+
+for i in 1 2 3; do
+  cat >a$i.f <<EOF
+      subroutine a$i(res)
+      implicit none
+      integer*4 res
+      res=$i
+      return
+      end
+EOF
+  $LIBTOOL --tag=F77 --mode=compile $F77 $FFLAGS -c main$i.f
+  $LIBTOOL --tag=F77 --mode=compile $F77 $FFLAGS -c a$i.f
+  $LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o liba$i.la a$i.lo
+done
+{ set +x
+$as_echo "$at_srcdir/convenience.at:152: \$LIBTOOL --tag=F77 --mode=link \$F77 \$FFLAGS \$LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist" "convenience.at:152"
+( $at_check_trace; $LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:152"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:154: \$LIBTOOL --tag=F77 --mode=link \$F77 \$FFLAGS \$LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist" "convenience.at:154"
+( $at_check_trace; $LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:154"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  { set +x
+$as_echo "$at_srcdir/convenience.at:160: \$LIBTOOL --tag=F77 --mode=link \$F77 \$FFLAGS \$LDFLAGS -static -o main_static\$EXEEXT main\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la" "convenience.at:160"
+( $at_check_trace; $LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:160"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/convenience.at:162: \$LIBTOOL --tag=F77 --mode=link \$F77 \$FFLAGS \$LDFLAGS -o main\$EXEEXT main\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la" "convenience.at:162"
+( $at_check_trace; $LIBTOOL --tag=F77 --mode=link $F77 $FFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:162"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./main_static; if test -f "./main_static$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:164: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:164"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:164"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:165: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:165"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:165"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_35
+#AT_START_36
+at_fn_group_banner 36 'convenience.at:170' \
+  "FC convenience archives" "                        " 3
+at_xfail=no
+(
+  $as_echo "36. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:171: { test -n \"\$FC\" && test \"X\$FC\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$FC\" && test \"X$FC\" != Xno; } || (exit 77)" "convenience.at:171"
+( $at_check_trace; { test -n "$FC" && test "X$FC" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:171"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+cat >main1.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      end
+EOF
+cat >main2.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      call a2(res)
+      end
+EOF
+cat >main3.f <<EOF
+      program main
+      implicit none
+      integer*4 res
+      call a1(res)
+      call a2(res)
+      call a3(res)
+      end
+EOF
+
+for i in 1 2 3; do
+  cat >a$i.f <<EOF
+      subroutine a$i(res)
+      implicit none
+      integer*4 res
+      res=$i
+      return
+      end
+EOF
+  $LIBTOOL --tag=FC --mode=compile $FC $FCFLAGS -c main$i.f
+  $LIBTOOL --tag=FC --mode=compile $FC $FCFLAGS -c a$i.f
+  $LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o liba$i.la a$i.lo
+done
+{ set +x
+$as_echo "$at_srcdir/convenience.at:212: \$LIBTOOL --tag=FC --mode=link \$FC \$FCFLAGS \$LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist" "convenience.at:212"
+( $at_check_trace; $LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:212"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:214: \$LIBTOOL --tag=FC --mode=link \$FC \$FCFLAGS \$LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist" "convenience.at:214"
+( $at_check_trace; $LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o liba123.la a3.lo liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:214"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  { set +x
+$as_echo "$at_srcdir/convenience.at:220: \$LIBTOOL --tag=FC --mode=link \$FC \$FCFLAGS \$LDFLAGS -static -o main_static\$EXEEXT main\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la" "convenience.at:220"
+( $at_check_trace; $LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -static -o main_static$EXEEXT main$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:220"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/convenience.at:222: \$LIBTOOL --tag=FC --mode=link \$FC \$FCFLAGS \$LDFLAGS -o main\$EXEEXT main\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la" "convenience.at:222"
+( $at_check_trace; $LIBTOOL --tag=FC --mode=link $FC $FCFLAGS $LDFLAGS -o main$EXEEXT main$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:222"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./main_static; if test -f "./main_static$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:224: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:224"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:224"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:225: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:225"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:225"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_36
+#AT_START_37
+at_fn_group_banner 37 'convenience.at:230' \
+  "Java convenience archives" "                      " 3
+at_xfail=no
+(
+  $as_echo "37. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:231: { test -n \"\$GCJ\" && test \"X\$GCJ\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$GCJ\" && test \"X$GCJ\" != Xno; } || (exit 77)" "convenience.at:231"
+( $at_check_trace; { test -n "$GCJ" && test "X$GCJ" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:231"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# There are just too many broken gcj installations out there, either missing
+   # libgcj.spec or unable to find it.  Skip the test for them.
+   cat >gcj_test.java <<'_ATEOF'
+public class gcj_test {
+    public static void main(String[] argv) { }
+  }
+_ATEOF
+
+   { set +x
+$as_echo "$at_srcdir/convenience.at:231: \$GCJ \$GCJFLAGS -c gcj_test.java || exit 77"
+at_fn_check_prepare_dynamic "$GCJ $GCJFLAGS -c gcj_test.java || exit 77" "convenience.at:231"
+( $at_check_trace; $GCJ $GCJFLAGS -c gcj_test.java || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:231"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:231: \$GCJ \$GCJFLAGS --main=gcj_test -o gcj_test\$EXEEXT gcj_test.java 	    || exit 77"
+at_fn_check_prepare_dynamic "$GCJ $GCJFLAGS --main=gcj_test -o gcj_test$EXEEXT gcj_test.java 	    || exit 77" "convenience.at:231"
+( $at_check_trace; $GCJ $GCJFLAGS --main=gcj_test -o gcj_test$EXEEXT gcj_test.java 	    || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:231"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+   { set +x
+$as_echo "$at_srcdir/convenience.at:231: ./gcj_test\$EXEEXT || exit 77"
+at_fn_check_prepare_dynamic "./gcj_test$EXEEXT || exit 77" "convenience.at:231"
+( $at_check_trace; ./gcj_test$EXEEXT || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:231"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+cat >foo1.java <<EOF
+public class foo1 {
+  public static void main(String[] argv) {
+    A1 a1 = new A1();
+  }
+}
+EOF
+cat >foo2.java <<EOF
+public class foo2 {
+  public static void main(String[] argv) {
+    A1 a1 = new A1(); A2 a2 = new A2();
+  }
+}
+EOF
+cat >foo3.java <<EOF
+public class foo3 {
+  public static void main(String[] argv) {
+    A1 a1 = new A1(); A2 a2 = new A2(); A3 a3 = new A3();
+  }
+}
+EOF
+for i in 1 2 3; do
+  cat >A$i.java <<EOF
+public class A$i {
+  private int a;
+  public A$i () { a = 0; }
+};
+EOF
+
+  $LIBTOOL --tag=GCJ --mode=compile $GCJ $GCJFLAGS -c foo$i.java
+  $LIBTOOL --tag=GCJ --mode=compile $GCJ $GCJFLAGS -c A$i.java
+  $LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -o liba$i.la A$i.lo
+done
+{ set +x
+$as_echo "$at_srcdir/convenience.at:267: \$LIBTOOL --tag=GCJ --mode=link \$GCJ \$GCJFLAGS \$LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist" "convenience.at:267"
+( $at_check_trace; $LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -o liba12.la liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:267"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/convenience.at:269: \$LIBTOOL --tag=GCJ --mode=link \$GCJ \$GCJFLAGS \$LDFLAGS -o liba123.la A3.lo liba1.la liba2.la -rpath /notexist"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -o liba123.la A3.lo liba1.la liba2.la -rpath /notexist" "convenience.at:269"
+( $at_check_trace; $LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -o liba123.la A3.lo liba1.la liba2.la -rpath /notexist
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:269"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+conv=
+for i in 1 2 3; do
+  conv=$conv$i
+  { set +x
+$as_echo "$at_srcdir/convenience.at:275: \$LIBTOOL --tag=GCJ --mode=link \$GCJ \$GCJFLAGS \$LDFLAGS -static --main=foo\$i -o main_static\$EXEEXT foo\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -static --main=foo$i -o main_static$EXEEXT foo$i.lo liba$conv.la" "convenience.at:275"
+( $at_check_trace; $LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS -static --main=foo$i -o main_static$EXEEXT foo$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:275"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/convenience.at:277: \$LIBTOOL --tag=GCJ --mode=link \$GCJ \$GCJFLAGS \$LDFLAGS --main=foo\$i -o main\$EXEEXT foo\$i.lo liba\$conv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS --main=foo$i -o main$EXEEXT foo$i.lo liba$conv.la" "convenience.at:277"
+( $at_check_trace; $LIBTOOL --tag=GCJ --mode=link $GCJ $GCJFLAGS $LDFLAGS --main=foo$i -o main$EXEEXT foo$i.lo liba$conv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:277"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./main_static; if test -f "./main_static$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:279: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:279"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:279"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/convenience.at:280: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "convenience.at:280"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/convenience.at:280"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_37
+#AT_START_38
+at_fn_group_banner 38 'link-order.at:26' \
+  "Link order test" "                                " 3
+at_xfail=no
+(
+  $as_echo "38. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+eval `$LIBTOOL --config | $EGREP '^(hardcode_direct|hardcode_direct_absolute|shrext_cmds)='`
+LDFLAGS="$LDFLAGS -no-undefined"
+
+module=no
+eval shared_ext=\"$shrext_cmds\"
+
+prefix_old=`pwd`/old
+prefix_new=`pwd`/new
+mkdir src $prefix_old $prefix_new $prefix_old/lib $prefix_new/lib
+
+cat >src/c.c <<'_ATEOF'
+int c = 1;
+_ATEOF
+
+
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c src/c.c -o src/c.lo
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/libcee.la src/c.lo -rpath $prefix_old/lib
+$LIBTOOL --mode=install cp src/libcee.la $prefix_old/lib/libcee.la
+
+for i in old new; do
+  rm -rf src
+  mkdir src
+
+  cat >src/a_$i.c <<EOF
+/* w32 fun, MSVC needs to dllimport when using a shared library, so use
+ * DLL_EXPORT to discriminate as that happens to coinside in this case.
+ * gnu has auto import.
+ */
+#if defined _MSC_VER && defined DLL_EXPORT
+#  define LIBCEE_SCOPE __declspec(dllimport)
+#else
+#  define LIBCEE_SCOPE extern
+#endif
+LIBCEE_SCOPE int c;
+extern int b_$i();
+int a_$i() { return c + b_$i(); }
+EOF
+
+  cat >src/b_$i.c <<EOF
+/* w32 fun, MSVC needs to dllimport when using a shared library, so use
+ * DLL_EXPORT to discriminate as that happens to coinside in this case.
+ * gnu has auto import.
+ */
+#if defined _MSC_VER && defined DLL_EXPORT
+#  define LIBCEE_SCOPE __declspec(dllimport)
+#else
+#  define LIBCEE_SCOPE extern
+#endif
+LIBCEE_SCOPE int c;
+int b_$i() { return 1 + c; }
+EOF
+
+  prefix=`eval echo \\$prefix_$i`
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c src/a_$i.c -o src/a.lo
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c src/b_$i.c -o src/b.lo
+  $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/libb.la src/b.lo \
+      -L$prefix_old/lib -lcee -rpath $prefix/lib
+  $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/liba.la src/a.lo \
+      src/libb.la -L$prefix_old/lib -lcee -rpath $prefix/lib
+  $LIBTOOL --mode=install cp src/libb.la $prefix/lib/libb.la
+  { set +x
+$as_echo "$at_srcdir/link-order.at:87: \$LIBTOOL --mode=install cp src/liba.la \$prefix/lib/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp src/liba.la $prefix/lib/liba.la" "link-order.at:87"
+( $at_check_trace; $LIBTOOL --mode=install cp src/liba.la $prefix/lib/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/link-order.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+$LIBTOOL --mode=clean rm -f src/libb.la
+$LIBTOOL --mode=clean rm -f src/liba.la
+
+case $host_os in
+aix* | interix*) ;;  # These systems have different path syntax
+*)
+  # Do not error if we do not relink (e.g. static-only systems)
+  case $hardcode_direct$hardcode_direct_absolute in
+  yesno)
+    { set +x
+$as_echo "$at_srcdir/link-order.at:100: if \$EGREP relinking stderr; then
+         \$EGREP \" .*\\/new\\/lib/libb\$shared_ext .*\\/old\\/lib/libcee\$shared_ext\" stdout
+       else :; fi"
+at_fn_check_prepare_notrace 'an embedded newline' "link-order.at:100"
+( $at_check_trace; if $EGREP relinking stderr; then
+         $EGREP " .*\/new\/lib/libb$shared_ext .*\/old\/lib/libcee$shared_ext" stdout
+       else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/link-order.at:100"
+if $at_failed; then :
+  echo "wrong link order"
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    ;;
+  *)
+    { set +x
+$as_echo "$at_srcdir/link-order.at:105: if \$EGREP relinking stderr; then
+         \$EGREP \" -L.*\\/new\\/lib -lb -L.*\\/old\\/lib -lcee\" stdout
+       else :; fi"
+at_fn_check_prepare_notrace 'an embedded newline' "link-order.at:105"
+( $at_check_trace; if $EGREP relinking stderr; then
+         $EGREP " -L.*\/new\/lib -lb -L.*\/old\/lib -lcee" stdout
+       else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/link-order.at:105"
+if $at_failed; then :
+  echo "wrong link order"
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    ;;
+  esac
+  ;;
+esac
+
+for i in old new; do
+  cat >src/main_$i.c <<EOF
+extern int a_$i();
+int main(void) { return a_$i() != 3; }
+EOF
+
+  prefix=`eval echo \\$prefix_$i`
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c src/main_$i.c -o src/main_$i.lo
+  { set +x
+$as_echo "$at_srcdir/link-order.at:121: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o src/main_\$i\$EXEEXT src/main_\$i.lo -L\$prefix/lib -la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/main_$i$EXEEXT src/main_$i.lo -L$prefix/lib -la" "link-order.at:121"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/main_$i$EXEEXT src/main_$i.lo -L$prefix/lib -la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/link-order.at:121"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=src/main_$i; if test -f "src/main_$i$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/link-order.at:123: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "link-order.at:123"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/link-order.at:123"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_38
+#AT_START_39
+at_fn_group_banner 39 'link-order2.at:46' \
+  "Link order of deplibs" "                          " 3
+at_xfail=no
+(
+  $as_echo "39. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+eval `$LIBTOOL --config | $EGREP '^(shlibpath_var|allow_undefined_flag)='`
+
+undefined_setting=-no-undefined
+shared_fails=no
+case $host_os,$LDFLAGS,$allow_undefined_flag in
+aix*,*-brtl*,*) ;;
+aix*) shared_fails=yes ;;
+darwin*,*,*-flat_namespace*) undefined_setting= ;;
+darwin*,*,*) shared_fails=yes ;;
+esac
+
+deflibdir=`pwd`/lib
+defbindir=`pwd`/lib
+libdir=`pwd`/inst/lib
+bindir=`pwd`/inst/bin
+mkdir bin lib inst inst/bin inst/lib
+LDFLAGS="$LDFLAGS $undefined_setting -L$deflibdir"
+
+cat >a0.c <<\EOF
+int a (void) { return 1; }
+EOF
+
+cat >a1.c <<\EOF
+int a (void) { return 0; }
+EOF
+
+cat >b.c <<\EOF
+int a (void);
+int b (void) { return a (); }
+EOF
+
+cat >main.c <<\EOF
+#include <stdlib.h>
+extern int a (void);
+extern int b (void);
+int main (void)
+{
+  return !(a () + b () == 0);
+}
+EOF
+
+for file in a0 a1 b; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file.c
+done
+$CC $CPPFLAGS $CFLAGS -c main.c
+
+# Build an old, installed library.
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o liba0.la a0.lo -rpath $deflibdir
+$LIBTOOL --mode=install cp liba0.la $deflibdir/liba0.la
+$LIBTOOL --mode=clean rm -f liba0.la
+
+for type_of_depdepl in libtool non-libtool; do
+  echo "type of depdepl: $type_of_depdepl"
+  if test $type_of_depdepl = non-libtool; then
+    # Simulate a non-Libtool system library.
+    rm $deflibdir/liba1.la
+    addpath=$deflibdir
+    if test "$shlibpath_var" = PATH; then
+      addpath=$defbindir
+    fi
+    sep=
+    eval test -n \"\$$shlibpath_var\" && sep=:
+    eval $shlibpath_var='$addpath$sep$'$shlibpath_var
+    export $shlibpath_var
+  fi
+  for static in '' -static-libtool-libs; do
+    case `$LIBTOOL --features` in
+    *disable\ static\ libraries*) test "$static" = '' || continue;;
+    esac
+    test "$type_of_depdepl,$static" = "non-libtool,-static-libtool-libs" &&
+       static=-all-static
+    $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o liba1.la a1.lo -rpath $libdir
+    $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o libb.la b.lo liba1.la -rpath $libdir
+    { set +x
+$as_echo "$at_srcdir/link-order2.at:123: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS \$static -o main\$EXEEXT main.\$OBJEXT libb.la -la0"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o main$EXEEXT main.$OBJEXT libb.la -la0" "link-order2.at:123"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o main$EXEEXT main.$OBJEXT libb.la -la0
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/link-order2.at:123"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/link-order2.at:125: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "link-order2.at:125"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/link-order2.at:125"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+    # Now test that if we reverse the link order, the program fails.
+    { set +x
+$as_echo "$at_srcdir/link-order2.at:127: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS \$static -o wrong\$EXEEXT main.\$OBJEXT -la0 libb.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o wrong$EXEEXT main.$OBJEXT -la0 libb.la" "link-order2.at:127"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $static -o wrong$EXEEXT main.$OBJEXT -la0 libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/link-order2.at:127"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    if test $shared_fails,$static != yes,; then
+      lt_exe=./wrong; if test -f "./wrong$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/link-order2.at:130: if \"\$lt_exe\" || (exit 1); then :; else lt_status=\$?; 	   test \$lt_status != 1 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" || (exit 1); then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "link-order2.at:130"
+( $at_check_trace; if "$lt_exe" || (exit 1); then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/link-order2.at:130"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+    fi
+
+    $LIBTOOL --mode=install cp liba1.la $libdir/liba1.la
+    $LIBTOOL --mode=install cp libb.la $libdir/libb.la
+    $LIBTOOL --mode=install cp main$EXEEXT $bindir/main$EXEEXT
+    $LIBTOOL --mode=install cp wrong$EXEEXT $bindir/wrong$EXEEXT
+    $LIBTOOL --mode=clean rm -f liba1.la libb.la
+    lt_exe=$bindir/main; if test -f "$bindir/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/link-order2.at:138: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "link-order2.at:138"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/link-order2.at:138"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+    if test $shared_fails,$static != yes,; then
+      lt_exe=$bindir/wrong; if test -f "$bindir/wrong$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/link-order2.at:140: if \"\$lt_exe\" || (exit 1); then :; else lt_status=\$?; 	   test \$lt_status != 1 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" || (exit 1); then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "link-order2.at:140"
+( $at_check_trace; if "$lt_exe" || (exit 1); then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/link-order2.at:140"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+    fi
+  done
+done
+
+{ set +x
+$as_echo "$at_srcdir/link-order2.at:145: test \$shared_fails = no || (exit 77)"
+at_fn_check_prepare_dynamic "test $shared_fails = no || (exit 77)" "link-order2.at:145"
+( $at_check_trace; test $shared_fails = no || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/link-order2.at:145"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Now the converse: if both the program and the library need libm, then
+# it needs to be sorted last.  (TODO)
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_39
+#AT_START_40
+at_fn_group_banner 40 'fail.at:27' \
+  "Failure tests" "                                  " 3
+at_xfail=no
+(
+  $as_echo "40. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+eval `$LIBTOOL --config | $EGREP '^(pic_mode|pic_flag|build_old_libs|build_libtool_libs)='`
+LDFLAGS="$LDFLAGS -no-undefined"
+
+
+
+cat >script <<'_ATEOF'
+#! /bin/sh
+exit 0
+_ATEOF
+
+chmod +x script
+if test -x script >/dev/null 2>&1; then
+  test_x="test -x"
+else
+  test_x=:
+fi
+
+# compile failure
+echo 'choke me' > a.c
+{ set +x
+$as_echo "$at_srcdir/fail.at:49: if \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c a.c; then (exit 1); else :; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c; then (exit 1); else :; fi" "fail.at:49"
+( $at_check_trace; if $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c; then (exit 1); else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/fail.at:49"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/fail.at:50: test -f a.lo"
+at_fn_check_prepare_trace "fail.at:50"
+( $at_check_trace; test -f a.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/fail.at:50"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# non-PIC compile failure
+case $pic_mode in default | no)
+  case " $CFLAGS " in
+   *\ -prefer-pic\ *) ;;
+   *)
+    case $build_old_libs,$pic_flag in yes,*-DPIC*)
+      cat >a.c <<'_ATEOF'
+
+#ifndef PIC
+  choke me
+#endif
+_ATEOF
+
+      { set +x
+$as_echo "$at_srcdir/fail.at:63: if \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -no-suppress -c a.c; then (exit 1); else :; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -no-suppress -c a.c; then (exit 1); else :; fi" "fail.at:63"
+( $at_check_trace; if $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -no-suppress -c a.c; then (exit 1); else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/fail.at:63"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+      { set +x
+$as_echo "$at_srcdir/fail.at:64: test -f a.lo"
+at_fn_check_prepare_trace "fail.at:64"
+( $at_check_trace; test -f a.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/fail.at:64"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+      ;;
+    esac
+    ;;
+  esac
+  ;;
+esac
+
+# program creation failure.
+# We can't rely on `main' not being present: the QNX linker
+# won't error out in that case, although the resulting binary won't work.
+# So we provoke a link failure due to an unresolved symbol, and require
+# libtool to fail only if the link without libtool would have failed, too.
+cat > a.c <<'EOF'
+extern int nonexistent_function (void);
+int main (void)
+{
+  return nonexistent_function ();
+}
+EOF
+$CC $CPPFLAGS $CFLAGS -c a.c
+if $CC $CFLAGS $LDFLAGS -o a$EXEEXT a.$OBJEXT; then :; else
+  rm -f a a$EXEEXT
+  { set +x
+$as_echo "$at_srcdir/fail.at:87: if \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o a\$EXEEXT a.\$OBJEXT; then (exit 1); else :; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o a$EXEEXT a.$OBJEXT; then (exit 1); else :; fi" "fail.at:87"
+( $at_check_trace; if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o a$EXEEXT a.$OBJEXT; then (exit 1); else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/fail.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  { set +x
+$as_echo "$at_srcdir/fail.at:88: { test -f a && \$test_x a; } || { test -f a\$EXEEXT && \$test_x a\$EXEEXT; }"
+at_fn_check_prepare_dynamic "{ test -f a && $test_x a; } || { test -f a$EXEEXT && $test_x a$EXEEXT; }" "fail.at:88"
+( $at_check_trace; { test -f a && $test_x a; } || { test -f a$EXEEXT && $test_x a$EXEEXT; }
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/fail.at:88"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/fail.at:89: if \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o a\$EXEEXT a.\$OBJEXT -static; then (exit 1); else :; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o a$EXEEXT a.$OBJEXT -static; then (exit 1); else :; fi" "fail.at:89"
+( $at_check_trace; if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o a$EXEEXT a.$OBJEXT -static; then (exit 1); else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/fail.at:89"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  { set +x
+$as_echo "$at_srcdir/fail.at:90: { test -f a && \$test_x a; } || { test -f a\$EXEEXT && \$test_x a\$EXEEXT; }"
+at_fn_check_prepare_dynamic "{ test -f a && $test_x a; } || { test -f a$EXEEXT && $test_x a$EXEEXT; }" "fail.at:90"
+( $at_check_trace; { test -f a && $test_x a; } || { test -f a$EXEEXT && $test_x a$EXEEXT; }
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/fail.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+
+# shared library creation failure
+case $build_libtool_libs in yes)
+  echo 'int duplicate_name(void) { return 0; }' > a.c
+  echo 'double duplicate_name(double x) { return 2.*x; }' > b.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c b.c
+  # Unfortunately, this may actually succeed on AIX and IRIX  :(
+  # So, also add a bogus object file to provoke more failure.
+  echo 'int whatever(void) { return 0;}' > c.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c c.c
+  (
+    . ./c.lo
+    test "$pic_object" != none && echo choke me >"$pic_object"
+    test "$non_pic_object" != none && echo choke me >"$non_pic_object"
+  )
+  { set +x
+$as_echo "$at_srcdir/fail.at:108: if \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la a.lo b.lo c.lo -rpath /foo; then (exit 1); else :; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo b.lo c.lo -rpath /foo; then (exit 1); else :; fi" "fail.at:108"
+( $at_check_trace; if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo b.lo c.lo -rpath /foo; then (exit 1); else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/fail.at:108"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  { set +x
+$as_echo "$at_srcdir/fail.at:109: test -f liba.la"
+at_fn_check_prepare_trace "fail.at:109"
+( $at_check_trace; test -f liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/fail.at:109"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  ;;
+esac
+
+# Ensure we diagnose '-L path'.
+echo 'int main () { return 0; }' > d.c
+echo 'int foo () { return 0; }' > space-after-L.c
+$CC $CPPFLAGS $CFLAGS -c d.c
+$CC $CPPFLAGS $CFLAGS -c space-after-L.c
+{ set +x
+$as_echo "$at_srcdir/fail.at:118: if \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -L space-after-L.\$OBJEXT -o d\$EXEEXT d.\$OBJEXT; then (exit 1); else :; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -L space-after-L.$OBJEXT -o d$EXEEXT d.$OBJEXT; then (exit 1); else :; fi" "fail.at:118"
+( $at_check_trace; if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -L space-after-L.$OBJEXT -o d$EXEEXT d.$OBJEXT; then (exit 1); else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/fail.at:118"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/fail.at:119: if \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o d\$EXEEXT d.\$OBJEXT -L; then (exit 1); else :; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o d$EXEEXT d.$OBJEXT -L; then (exit 1); else :; fi" "fail.at:119"
+( $at_check_trace; if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o d$EXEEXT d.$OBJEXT -L; then (exit 1); else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/fail.at:119"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_40
+#AT_START_41
+at_fn_group_banner 41 'shlibpath.at:25' \
+  "shlibpath_overrides_runpath" "                    " 3
+at_xfail=no
+(
+  $as_echo "41. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+mkdir sub sub/lib sub/bin
+echo 'int a () { return 0; }' > a.c
+echo 'extern int a (); int main () { return a(); }' > m.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath `pwd`/sub/lib
+$LIBTOOL --mode=install cp liba.la `pwd`/sub/lib/liba.la
+$LIBTOOL --mode=clean rm -f liba.la
+rm -f sub/lib/liba.la
+
+$CC $CPPFLAGS $CFLAGS -c m.c
+{ set +x
+$as_echo "$at_srcdir/shlibpath.at:38: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m\$EXEEXT m.\$OBJEXT -Lsub/lib -la -R\`pwd\`/sub/lib"
+at_fn_check_prepare_notrace 'a `...` command substitution' "shlibpath.at:38"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT m.$OBJEXT -Lsub/lib -la -R`pwd`/sub/lib
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/shlibpath.at:38"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/shlibpath.at:40: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m2\$EXEEXT m.\$OBJEXT -Lsub/lib -la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m2$EXEEXT m.$OBJEXT -Lsub/lib -la" "shlibpath.at:40"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m2$EXEEXT m.$OBJEXT -Lsub/lib -la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/shlibpath.at:40"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+$mkdir_p moved
+(cd sub && find . -type d) | (cd moved && xargs $mkdir_p)
+for file in `cd sub && find . -type f -print -o -type l -print`
+do
+  mv sub/$file moved/$file
+done
+rm -rf sub
+
+mkdir sub sub/lib sub/bin
+echo 'int wrong_lib () { return 0; }' > a.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath `pwd`/sub/lib
+$LIBTOOL --mode=install cp liba.la `pwd`/sub/lib/liba.la
+$LIBTOOL --mode=clean rm -f liba.la
+
+eval `$LIBTOOL --config | $EGREP '^(shlibpath_var|shlibpath_overrides_runpath)='`
+
+# No point checking a system with static libraries:
+lt_exe=./m; if test -f "./m$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/shlibpath.at:54: if \"\$lt_exe\" || exit 1 && exit 77; then :; else lt_status=\$?; 	   test \$lt_status != 1 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" || exit 1 && exit 77; then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "shlibpath.at:54"
+( $at_check_trace; if "$lt_exe" || exit 1 && exit 77; then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/shlibpath.at:54"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+if test "$shlibpath_var" = PATH; then
+  addpath=`pwd`/moved/bin
+else
+  addpath=`pwd`/moved/lib
+fi
+sep=
+eval test -n \"\$$shlibpath_var\" && sep=:
+eval $shlibpath_var='$addpath$sep$'$shlibpath_var
+export $shlibpath_var
+if test "$shlibpath_overrides_runpath" != no; then
+  lt_exe=./m; if test -f "./m$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/shlibpath.at:66: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "shlibpath.at:66"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/shlibpath.at:66"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+else
+  lt_exe=./m; if test -f "./m$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/shlibpath.at:68: if \"\$lt_exe\" || exit 1; then :; else lt_status=\$?; 	   test \$lt_status != 1 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" || exit 1; then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "shlibpath.at:68"
+( $at_check_trace; if "$lt_exe" || exit 1; then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/shlibpath.at:68"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+fi
+# Test that shlibpath_var is effective in adding paths at all:
+lt_exe=./m2; if test -f "./m2$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/shlibpath.at:71: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "shlibpath.at:71"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/shlibpath.at:71"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_41
+#AT_START_42
+at_fn_group_banner 42 'runpath-in-lalib.at:25' \
+  "Runpath in libtool library files" "               " 3
+at_xfail=no
+(
+  $as_echo "42. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >a.c <<'_ATEOF'
+int a () { return 0; }
+_ATEOF
+
+cat >b.c <<'_ATEOF'
+extern int a ();
+int b () { return a (); }
+_ATEOF
+
+cat >m.c <<'_ATEOF'
+extern int b ();
+int main () { return b (); }
+_ATEOF
+
+
+instdir=`pwd`/inst
+libdir=$instdir/lib
+bindir=$instdir/bin
+addrunpath=`pwd`/foobar
+
+mkdir $instdir $libdir $bindir
+
+for file in a.c b.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+$CC $CPPFLAGS $CFLAGS -c m.c
+{ set +x
+$as_echo "$at_srcdir/runpath-in-lalib.at:51: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la a.lo -rpath \$libdir -R\$addrunpath"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir -R$addrunpath" "runpath-in-lalib.at:51"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir -R$addrunpath
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/runpath-in-lalib.at:51"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/runpath-in-lalib.at:53: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libb.la b.lo -rpath \$libdir liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la b.lo -rpath $libdir liba.la" "runpath-in-lalib.at:53"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la b.lo -rpath $libdir liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/runpath-in-lalib.at:53"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/runpath-in-lalib.at:55: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m\$EXEEXT m.\$OBJEXT libb.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT m.$OBJEXT libb.la" "runpath-in-lalib.at:55"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT m.$OBJEXT libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/runpath-in-lalib.at:55"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/runpath-in-lalib.at:57: \$LIBTOOL --mode=install cp liba.la \$libdir/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba.la $libdir/liba.la" "runpath-in-lalib.at:57"
+( $at_check_trace; $LIBTOOL --mode=install cp liba.la $libdir/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/runpath-in-lalib.at:57"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/runpath-in-lalib.at:58: \$LIBTOOL --mode=install cp libb.la \$libdir/libb.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp libb.la $libdir/libb.la" "runpath-in-lalib.at:58"
+( $at_check_trace; $LIBTOOL --mode=install cp libb.la $libdir/libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/runpath-in-lalib.at:58"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/runpath-in-lalib.at:59: \$LIBTOOL --mode=install cp m\$EXEEXT \$bindir/m\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp m$EXEEXT $bindir/m$EXEEXT" "runpath-in-lalib.at:59"
+( $at_check_trace; $LIBTOOL --mode=install cp m$EXEEXT $bindir/m$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/runpath-in-lalib.at:59"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/runpath-in-lalib.at:61: grep /foobar \$libdir/liba.la"
+at_fn_check_prepare_dynamic "grep /foobar $libdir/liba.la" "runpath-in-lalib.at:61"
+( $at_check_trace; grep /foobar $libdir/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/runpath-in-lalib.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/runpath-in-lalib.at:62: grep /foobar \$libdir/libb.la"
+at_fn_check_prepare_dynamic "grep /foobar $libdir/libb.la" "runpath-in-lalib.at:62"
+( $at_check_trace; grep /foobar $libdir/libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/runpath-in-lalib.at:62"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# TODO: check that m gets -R, too.
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_42
+#AT_START_43
+at_fn_group_banner 43 'static.at:68' \
+  "static linking flags for programs" "              " 3
+at_xfail=no
+(
+  $as_echo "43. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+prefix=`pwd`/inst
+bindir=$prefix/bin
+prefix1=`pwd`/inst1
+prefix2=`pwd`/inst2
+prefix3=`pwd`/inst3
+libdir1=$prefix1/lib
+libdir2=$prefix2/lib
+libdir3=$prefix3/lib
+srcdir_broken=`pwd`/broken-src
+prefix_broken=`pwd`/broken
+libdir_broken=$prefix_broken/lib
+bindir_broken=$prefix_broken/bin
+
+have_static=false
+have_shared=false
+per_deplib=false
+$LIBTOOL --features | grep 'enable static libraries' >/dev/null && have_static=:
+$LIBTOOL --features | grep 'enable shared libraries' >/dev/null && have_shared=:
+eval `$LIBTOOL --config |
+        $EGREP '^(per_deplib_(static|dynamic)_flag|shlibpath_var|link_static_flag)='`
+if test -n "$per_deplib_static_flag" && test -n "$per_deplib_dynamic_flag"; then
+  per_deplib=:
+fi
+# On GNU/Linux with --disable-static, m-all-static fails to link.
+# What we'd like to state here is: if the user actively passed
+# --disable-static (as opposed to: the libtool.m4 macros set
+# enable_static=no), then they cannot expect -all-static to work.
+# So we punt, knowing that we mangle enable_static on AIX only.
+can_link_all_static=-all-static
+case $host_os,$have_static,$link_static_flag in
+  aix*) ;;
+  *,false,?*) can_link_all_static= ;;
+esac
+
+# Create broken libraries.  They will later be moved to those
+# directories where the respective libraries should be linked
+# statically from.  This detects both failure to link statically
+# and failure to omit extraneous run paths.
+mkdir $srcdir_broken $prefix_broken $libdir_broken
+(
+  cd $srcdir_broken
+  echo 'int this_should_not_be_linked_against() { return 0; }' > a.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+  for i in 1 1dep 2 2dep 3 3dep; do
+    $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la a.lo -rpath $libdir_broken
+    $LIBTOOL --mode=install cp liba$i.la $libdir_broken/liba$i.la
+  done
+)
+
+func_fix_path ()
+{
+  # For w32, hardcoding cannot work, but $libdir/../bin is where binaries
+  # usually are installed.  Since we use several prefixes for testing
+  # convenience -- it allows us to replace the good libraries easily with
+  # broken ones and vice versa -- we have to set PATH to find them.
+  # Since OTOH we put broken libs of all names in the "moved" prefixes,
+  # we have to ensure that this prefix comes last: otherwise we may link
+  # against a broken library but the good one would come later in the PATH.
+  # So we let the caller of this function set the order: the "other" two
+  # come first.
+  if test "$shlibpath_var" = PATH; then
+    save_PATH=$PATH
+    sep=
+    test -z "$PATH" || sep=:
+    PATH=${2}/bin:${3}/bin:${1}/bin$sep$PATH
+  fi
+
+}
+
+func_restore_path ()
+{
+  if test "$shlibpath_var" = PATH; then
+    PATH=$save_PATH
+  fi
+}
+
+# func_move_libs srcdir_to_move prefix_to_move other_prefix other_prefix
+func_move_libs ()
+{
+  $mkdir_p "${1}-moved"
+(cd "${1}" && find . -type d) | (cd "${1}-moved" && xargs $mkdir_p)
+for file in `cd "${1}" && find . -type f -print -o -type l -print`
+do
+  mv "${1}"/$file "${1}-moved"/$file
+done
+rm -rf "${1}"
+
+  $mkdir_p "${2}-moved"
+(cd "${2}" && find . -type d) | (cd "${2}-moved" && xargs $mkdir_p)
+for file in `cd "${2}" && find . -type f -print -o -type l -print`
+do
+  mv "${2}"/$file "${2}-moved"/$file
+done
+rm -rf "${2}"
+
+  $mkdir_p "${1}"
+(cd "$srcdir_broken" && find . -type d) | (cd "${1}" && xargs $mkdir_p)
+for file in `cd "$srcdir_broken" && find . -type f -print -o -type l -print`
+do
+  mv "$srcdir_broken"/$file "${1}"/$file
+done
+rm -rf "$srcdir_broken"
+
+  $mkdir_p "${2}"
+(cd "$prefix_broken" && find . -type d) | (cd "${2}" && xargs $mkdir_p)
+for file in `cd "$prefix_broken" && find . -type f -print -o -type l -print`
+do
+  mv "$prefix_broken"/$file "${2}"/$file
+done
+rm -rf "$prefix_broken"
+
+  func_fix_path ${2} ${3} ${4}
+}
+
+# func_restore_libs srcdir_to_restore prefix_to_restore
+func_restore_libs ()
+{
+  func_restore_path
+  $mkdir_p "$prefix_broken"
+(cd "${2}" && find . -type d) | (cd "$prefix_broken" && xargs $mkdir_p)
+for file in `cd "${2}" && find . -type f -print -o -type l -print`
+do
+  mv "${2}"/$file "$prefix_broken"/$file
+done
+rm -rf "${2}"
+
+  $mkdir_p "$srcdir_broken"
+(cd "${1}" && find . -type d) | (cd "$srcdir_broken" && xargs $mkdir_p)
+for file in `cd "${1}" && find . -type f -print -o -type l -print`
+do
+  mv "${1}"/$file "$srcdir_broken"/$file
+done
+rm -rf "${1}"
+
+  $mkdir_p "${2}"
+(cd "${2}-moved" && find . -type d) | (cd "${2}" && xargs $mkdir_p)
+for file in `cd "${2}-moved" && find . -type f -print -o -type l -print`
+do
+  mv "${2}-moved"/$file "${2}"/$file
+done
+rm -rf "${2}-moved"
+
+  $mkdir_p "${1}"
+(cd "${1}-moved" && find . -type d) | (cd "${1}" && xargs $mkdir_p)
+for file in `cd "${1}-moved" && find . -type f -print -o -type l -print`
+do
+  mv "${1}-moved"/$file "${1}"/$file
+done
+rm -rf "${1}-moved"
+
+}
+
+# make sure the program can be run.
+func_test_exec ()
+{
+  # On AIX without runtimelinking, this does not make sense.
+  if $have_static; then
+    echo "## The following should succeed:"
+    for st
+    do
+      echo "# m$st"
+      lt_exe=./m$st; if test -f "./m$st$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/static.at:178: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "static.at:178"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:178"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+      # For some per-deplib flag combinations there may be no installed program,
+      # because liba2 is not yet installed.
+      if test -f "$bindir/m${st}$EXEEXT"; then
+	lt_exe=$bindir/m$st; if test -f "$bindir/m$st$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/static.at:182: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "static.at:182"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:182"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+      fi
+    done
+  fi
+}
+
+# make sure the program cannot be run.
+func_test_exec_fail ()
+{
+  # No point in testing if we're linking statically anyway.
+  # TODO: Maybe in the `else' case we could test for success?
+  if $have_shared; then
+    echo "## The following should fail:"
+    for st
+    do
+      echo "# m$st"
+      lt_exe=./m$st; if test -f "./m$st$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/static.at:198: if \"\$lt_exe\" || (exit 1); then :; else lt_status=\$?; 	   test \$lt_status != 1 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" || (exit 1); then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "static.at:198"
+( $at_check_trace; if "$lt_exe" || (exit 1); then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/static.at:198"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+      # For some per-deplib flag combinations there may be no installed program,
+      # because liba2 is not yet installed.
+      if test -f "$bindir/m${st}$EXEEXT"; then
+	lt_exe=$bindir/m$st; if test -f "$bindir/m$st$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/static.at:202: if \"\$lt_exe\" || (exit 1); then :; else lt_status=\$?; 	   test \$lt_status != 1 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" || (exit 1); then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "static.at:202"
+( $at_check_trace; if "$lt_exe" || (exit 1); then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/static.at:202"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+      fi
+    done
+  fi
+}
+
+
+# Try three independent libraries,
+#   one installed libtool library,
+#   one uninstalled libtool library,
+#   one non-libtool library,
+# the libtool libraries each having a dependency, or not.
+# Try both an uninstalled and the corresponding installed program.
+
+for withdep in no yes; do
+  echo
+  echo "### libraries with dependencies: $withdep"
+  rm -rf src $prefix $prefix1 $prefix2 $prefix3
+  mkdir src $prefix $bindir $prefix1 $prefix2 $prefix3
+  cd src
+
+  ### build the libraries.
+  for i in 1 2 3; do
+    eval ldir=\$libdir$i
+    mkdir a$i $ldir
+    cd a$i
+    case $withdep,$i in
+    no,* | yes,3)
+      echo "int a$i() { return 0; }" > a$i.c
+      $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a$i.c
+      $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la a$i.lo -rpath $ldir
+      ;;
+    *)
+      echo "int a${i}dep() { return 0; }" > a${i}dep.c
+      $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a${i}dep.c
+      $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba${i}dep.la a${i}dep.lo -rpath $ldir
+      echo "extern int a${i}dep(); int a$i() { return a${i}dep(); }" > a$i.c
+      $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a$i.c
+      $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la a$i.lo -rpath $ldir ./liba${i}dep.la
+      ;;
+    esac
+    cd ..
+  done
+
+  ### install the libraries.
+  test "$withdep" = yes && $LIBTOOL --mode=install cp a1/liba1dep.la $libdir1/liba1dep.la
+  $LIBTOOL --mode=install cp a1/liba1.la $libdir1/liba1.la
+  $LIBTOOL --mode=install cp a3/liba3.la $libdir3/liba3.la
+  $LIBTOOL --mode=clean rm -f a1/liba1.la a3/liba3.la
+  test "$withdep" = yes && $LIBTOOL --mode=clean rm -f a1/liba1dep.la
+  # simulate a non-libtool lib:
+  rm -f $libdir3/liba3.la
+
+
+  ### build the programs.
+  echo 'extern int a1(), a2(), a3();
+  int main() { return a1() + a2() + a3(); }' > m.c
+  $CC $CPPFLAGS $CFLAGS -c m.c
+
+  # global static flags.
+  for st in -static -static-libtool-libs $can_link_all_static; do
+    { set +x
+$as_echo "$at_srcdir/static.at:263: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS \$st -o m\${st}\$EXEEXT m.\$OBJEXT \\
+	-L\$libdir1 -la1 a2/liba2.la -L\$libdir3 -R\$libdir3 -la3"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "static.at:263"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o m${st}$EXEEXT m.$OBJEXT \
+	-L$libdir1 -la1 a2/liba2.la -L$libdir3 -R$libdir3 -la3
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:263"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  done
+
+  # per-deplib static/shared flags.
+  # also try a bit redundant flags, and shuffled order (for run paths check).
+  if $per_deplib; then
+    { set +x
+$as_echo "$at_srcdir/static.at:271: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m1\$EXEEXT m.\$OBJEXT \\
+	      -L\$libdir1 -Bstatic -la1 -Bdynamic a2/liba2.la -L\$libdir3 -R\$libdir3 -la3"
+at_fn_check_prepare_notrace 'an embedded newline' "static.at:271"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m1$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 -Bdynamic a2/liba2.la -L$libdir3 -R$libdir3 -la3
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:271"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/static.at:274: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m2\$EXEEXT m.\$OBJEXT \\
+	      -L\$libdir1 -la1 -Bstatic a2/liba2.la -Bdynamic -L\$libdir3 -R\$libdir3 -la3"
+at_fn_check_prepare_notrace 'an embedded newline' "static.at:274"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m2$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -la1 -Bstatic a2/liba2.la -Bdynamic -L$libdir3 -R$libdir3 -la3
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:274"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/static.at:277: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m3\$EXEEXT m.\$OBJEXT \\
+	      -L\$libdir1 -la1 a2/liba2.la -L\$libdir3 -Bstatic -la3 -Bdynamic"
+at_fn_check_prepare_notrace 'an embedded newline' "static.at:277"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m3$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -la1 a2/liba2.la -L$libdir3 -Bstatic -la3 -Bdynamic
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:277"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/static.at:280: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m12\$EXEEXT m.\$OBJEXT \\
+	      -L\$libdir1 -Bstatic -la1 a2/liba2.la -Bdynamic -L\$libdir3 -R\$libdir3 -la3"
+at_fn_check_prepare_notrace 'an embedded newline' "static.at:280"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m12$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 a2/liba2.la -Bdynamic -L$libdir3 -R$libdir3 -la3
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:280"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/static.at:283: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m13\$EXEEXT m.\$OBJEXT \\
+	      -L\$libdir1 -Bstatic -la1 -Bdynamic a2/liba2.la \\
+	      -L\$libdir3 -Bstatic -la3 -Bdynamic"
+at_fn_check_prepare_notrace 'an embedded newline' "static.at:283"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m13$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 -Bdynamic a2/liba2.la \
+	      -L$libdir3 -Bstatic -la3 -Bdynamic
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:283"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/static.at:287: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m31\$EXEEXT m.\$OBJEXT \\
+	      -L\$libdir3 -Bstatic -la3 -Bdynamic a2/liba2.la \\
+	      -L\$libdir1 -Bstatic -la1 -Bdynamic"
+at_fn_check_prepare_notrace 'an embedded newline' "static.at:287"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m31$EXEEXT m.$OBJEXT \
+	      -L$libdir3 -Bstatic -la3 -Bdynamic a2/liba2.la \
+	      -L$libdir1 -Bstatic -la1 -Bdynamic
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:287"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/static.at:291: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m23\$EXEEXT m.\$OBJEXT \\
+	      -L\$libdir1 -la1 -Bstatic a2/liba2.la -Bdynamic \\
+	      -L\$libdir3 -Bstatic -la3 -Bdynamic"
+at_fn_check_prepare_notrace 'an embedded newline' "static.at:291"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m23$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -la1 -Bstatic a2/liba2.la -Bdynamic \
+	      -L$libdir3 -Bstatic -la3 -Bdynamic
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:291"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/static.at:295: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m123\$EXEEXT m.\$OBJEXT \\
+	      -L\$libdir1 -Bstatic -la1 a2/liba2.la -L\$libdir3 -la3 -Bdynamic"
+at_fn_check_prepare_notrace 'an embedded newline' "static.at:295"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m123$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 a2/liba2.la -L$libdir3 -la3 -Bdynamic
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:295"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/static.at:298: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m123a\$EXEEXT m.\$OBJEXT \\
+	      -L\$libdir1 -Bstatic -la1 -Bdynamic -Bstatic a2/liba2.la -Bdynamic \\
+	      -Bstatic -L\$libdir3 -la3 -Bdynamic"
+at_fn_check_prepare_notrace 'an embedded newline' "static.at:298"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m123a$EXEEXT m.$OBJEXT \
+	      -L$libdir1 -Bstatic -la1 -Bdynamic -Bstatic a2/liba2.la -Bdynamic \
+	      -Bstatic -L$libdir3 -la3 -Bdynamic
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:298"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+                  fi
+
+  ### install the programs.
+  # We can't install any program that links dynamically against liba2.
+  for st in -static -static-libtool-libs $can_link_all_static `$per_deplib && echo 2 12 23 123 123a`; do
+    echo "# m$st"
+    { set +x
+$as_echo "$at_srcdir/static.at:312: \$LIBTOOL --mode=install cp m\${st}\$EXEEXT \$bindir/m\${st}\$EXEEXT"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "static.at:312"
+( $at_check_trace; $LIBTOOL --mode=install cp m${st}$EXEEXT $bindir/m${st}$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:312"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    if $have_static; then
+      { set +x
+$as_echo "$at_srcdir/static.at:314: \$EGREP 'relinking|has not been installed' stderr"
+at_fn_check_prepare_notrace 'a shell pipeline' "static.at:314"
+( $at_check_trace; $EGREP 'relinking|has not been installed' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/static.at:314"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    fi
+  done
+
+
+  ### Run each program once so that relinking has happened.
+
+  func_fix_path $prefix1 $prefix2 $prefix3
+  func_test_exec -static -static-libtool-libs -all-static `$per_deplib && echo 1 2 3 12 13 23 31 123 123a`
+  func_restore_path
+
+  # For each library:
+  # - remove the library images to catch failure to link statically/dynamically,
+  # - add false other deplibs in the paths to catch (some) wrongly added run paths.
+
+  # if -all-static does not work, do not exercise it any more.
+  all_static=-all-static
+  test -z "$link_static_flag" && all_static=
+
+  echo "### test whether installed libtool library liba2 was linked statically"
+  func_move_libs a2 $prefix2 $prefix3 $prefix1
+  func_test_exec -static -static-libtool-libs $all_static `$per_deplib && echo 2 12 23 123 123a`
+  $per_deplib && func_test_exec_fail 1 3 13 31
+  func_restore_libs a2 $prefix2
+
+  echo "### test whether uninstalled libtool library liba1 was linked statically"
+  func_move_libs a1 $prefix1 $prefix2 $prefix3
+  func_test_exec -static-libtool-libs $all_static `$per_deplib && echo 1 12 13 31 123 123a`
+  $per_deplib && func_test_exec_fail -static 2 3 23
+  func_restore_libs a1 $prefix1
+
+  echo "### test whether non-libtool library liba3 was linked statically"
+  func_move_libs a3 $prefix3 $prefix1 $prefix2
+  func_test_exec $all_static `$per_deplib && echo 3 13 23 31 123 123a`
+  func_test_exec_fail -static -static-libtool-libs `$per_deplib && echo 1 2 12`
+  func_restore_libs a3 $prefix3
+
+  cd ..
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_43
+#AT_START_44
+at_fn_group_banner 44 'static.at:358' \
+  "ccache -all-static" "                             " 3
+at_xfail=no
+(
+  $as_echo "44. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >ccache <<'_ATEOF'
+#! /bin/sh
+# poor man's ccache clone
+case $1 in
+-*) echo "bogus argument: $1" >&2; exit 1 ;;
+esac
+exec "$@"
+_ATEOF
+
+chmod +x ./ccache
+
+cat >a.c <<'_ATEOF'
+int main(void) { return 0; }
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/static.at:374: \$CC \$CPPFLAGS \$CFLAGS -c a.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c a.c" "static.at:374"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c a.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:374"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/static.at:375: \$LIBTOOL --mode=link --tag=CC ./ccache \$CC \$CFLAGS \$LDFLAGS -all-static a.\$OBJEXT -o a\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC ./ccache $CC $CFLAGS $LDFLAGS -all-static a.$OBJEXT -o a$EXEEXT" "static.at:375"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC ./ccache $CC $CFLAGS $LDFLAGS -all-static a.$OBJEXT -o a$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/static.at:375"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_44
+#AT_START_45
+at_fn_group_banner 45 'export.at:25' \
+  "Export test" "                                    " 3
+at_xfail=no
+(
+  $as_echo "45. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+{ set +x
+$as_echo "$at_srcdir/export.at:28: \$LIBTOOL --features | grep 'disable shared libraries' && (exit 77)"
+at_fn_check_prepare_notrace 'a shell pipeline' "export.at:28"
+( $at_check_trace; $LIBTOOL --features | grep 'disable shared libraries' && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/export.at:28"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/export.at:30: eval \`\$LIBTOOL --config | sed -n '/^archive_expsym_cmds=/,/^\$/p'\`
+	  test -n \"\$archive_expsym_cmds\" || echo false >can-hide
+	  case \$archive_expsym_cmds in
+	  *-retain-symbols-file*) echo false >can-hide ;;
+	  esac"
+at_fn_check_prepare_notrace 'a `...` command substitution' "export.at:30"
+( $at_check_trace; eval `$LIBTOOL --config | sed -n '/^archive_expsym_cmds=/,/^$/p'`
+	  test -n "$archive_expsym_cmds" || echo false >can-hide
+	  case $archive_expsym_cmds in
+	  *-retain-symbols-file*) echo false >can-hide ;;
+	  esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:30"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+can_hide=:
+test -s can-hide && can_hide=false
+
+LDFLAGS="$LDFLAGS -no-undefined"
+libdir=`pwd`/inst/lib
+mkdir inst inst/lib
+
+cat >a.c <<'_ATEOF'
+/* all kinds of data items */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+int v1;
+static int v2;
+int v3 = 0;
+int v4 = 1;
+extern const int v5, v6;
+extern const char *v7;
+extern const char v8[];
+extern int (*const v12) (void);
+const int v5 = 0;
+const int v6 = 1;
+const char* v7 = "\01foo";
+const char v8[] = "\01bar";
+int v9(void) { return v2 + 1; }
+int (*v10) (void);
+int (*v11) (void) = v9;
+int (*const v12) (void) = v9;
+
+typedef struct { int arr[1000]; } large;
+large v13;
+large v14 = { { 0 } };
+large v15 = { { 1 } };
+
+int w1 (void) { return 0; }
+
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >asyms <<'_ATEOF'
+v1
+v3
+v4
+v5
+v6
+v7
+v8
+v9
+v10
+v11
+v12
+v13
+v14
+v15
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+
+/* w32 fun.  With GCC, you can have auto-import, which will work for
+ * functions and non-const variables.  With MSVC, you have to explicitly
+ * import all variables.  Depending on the amount of portability, you
+ * need these annotations: LIBA_SCOPE for GCC, and also LIBA_SCOPE_VAR
+ * for MSVC.  Of course you can merge both to one, this test only avoids
+ * that in order to expose the auto-import feature on Cygwin.
+ *
+ * For users, it's best to realize that they should not provide any
+ * non-function API at all.
+ */
+#if defined(LIBA_DLL_IMPORT)
+#  if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__)
+#    define LIBA_SCOPE extern __declspec(dllimport)
+#    if defined(_MSC_VER)
+#      define LIBA_SCOPE_VAR LIBA_SCOPE
+#    endif
+#  endif
+#endif
+#if !defined(LIBA_SCOPE)
+#  define LIBA_SCOPE extern
+#endif
+#if !defined(LIBA_SCOPE_VAR)
+#  define LIBA_SCOPE_VAR extern
+#endif
+#ifdef __cplusplus
+extern "C" {
+#endif
+LIBA_SCOPE_VAR int v1;
+LIBA_SCOPE_VAR int v3, v4;
+LIBA_SCOPE const int v5, v6;
+LIBA_SCOPE_VAR const char* v7;
+LIBA_SCOPE_VAR const char v8[];
+extern int v9(void);
+LIBA_SCOPE_VAR int (*v10) (void);
+LIBA_SCOPE_VAR int (*v11) (void);
+LIBA_SCOPE int (*const v12) (void);
+#ifdef __cplusplus
+}
+#endif
+
+typedef struct { int arr[1000]; } large;
+LIBA_SCOPE_VAR large v13, v14, v15;
+
+int main (void)
+{
+  char s = v7[0] + v8[0];
+  return s + v1 + v3 + v4 + v5 + v6 + v9() + v11() + v12()
+	   + v13.arr[0] + v14.arr[0] + v15.arr[0]
+           - 8;
+}
+_ATEOF
+
+
+cat >broken.c <<'_ATEOF'
+
+/* these symbols should not be exported */
+#ifdef __cplusplus
+extern "C" {
+#endif
+extern int w1 (void);
+#ifdef __cplusplus
+}
+#endif
+int main (void)
+{
+  return w1 ();
+}
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/export.at:164: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c a.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c" "export.at:164"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:164"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/export.at:165: \$CC \$CPPFLAGS -DLIBA_DLL_IMPORT \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS -DLIBA_DLL_IMPORT $CFLAGS -c main.c" "export.at:165"
+( $at_check_trace; $CC $CPPFLAGS -DLIBA_DLL_IMPORT $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:165"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/export.at:166: \$CC \$CPPFLAGS \$CFLAGS -c broken.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c broken.c" "export.at:166"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c broken.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:166"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for exportsyms in '' '-export-symbols-regex "v.*"' '-export-symbols asyms'
+do
+  # case 1: shared library built from object.
+  echo "eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo \\
+	       -rpath $libdir' $exportsyms"; { set +x
+$as_echo "$at_srcdir/export.at:171: eval '\$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la a.lo \\
+	       -rpath \$libdir' \$exportsyms"
+at_fn_check_prepare_notrace 'an embedded newline' "export.at:171"
+( $at_check_trace; eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo \
+	       -rpath $libdir' $exportsyms
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:171"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/export.at:173: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la" "export.at:173"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:173"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/export.at:175: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "export.at:175"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:175"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  if test -n "$exportsyms" && $can_hide; then
+    { set +x
+$as_echo "$at_srcdir/export.at:177: if \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o broken\$EXEEXT broken.\$OBJEXT liba.la
+	      then (exit 1); else :; fi"
+at_fn_check_prepare_notrace 'an embedded newline' "export.at:177"
+( $at_check_trace; if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o broken$EXEEXT broken.$OBJEXT liba.la
+	      then (exit 1); else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:177"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  fi
+
+  # case 2: shared library built from convenience archive.
+  { set +x
+$as_echo "$at_srcdir/export.at:182: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libconv.la a.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libconv.la a.lo" "export.at:182"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libconv.la a.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:182"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  echo "eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la libconv.la \\
+	       -rpath $libdir' $exportsyms"; { set +x
+$as_echo "$at_srcdir/export.at:184: eval '\$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la libconv.la \\
+	       -rpath \$libdir' \$exportsyms"
+at_fn_check_prepare_notrace 'an embedded newline' "export.at:184"
+( $at_check_trace; eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la libconv.la \
+	       -rpath $libdir' $exportsyms
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:184"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/export.at:186: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la" "export.at:186"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:186"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/export.at:188: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "export.at:188"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:188"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  if test -n "$exportsyms" && $can_hide; then
+    { set +x
+$as_echo "$at_srcdir/export.at:190: if \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o broken\$EXEEXT broken.\$OBJEXT liba.la
+	      then (exit 1); else :; fi"
+at_fn_check_prepare_notrace 'an embedded newline' "export.at:190"
+( $at_check_trace; if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o broken$EXEEXT broken.$OBJEXT liba.la
+	      then (exit 1); else :; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:190"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  fi
+done
+
+{ set +x
+$as_echo "$at_srcdir/export.at:195: \$can_hide || (exit 77)"
+at_fn_check_prepare_dynamic "$can_hide || (exit 77)" "export.at:195"
+( $at_check_trace; $can_hide || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/export.at:195"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_45
+#AT_START_46
+at_fn_group_banner 46 'search-path.at:24' \
+  "sys_lib_search_path" "                            " 3
+at_xfail=no
+(
+  $as_echo "46. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+
+cat >main.c <<'_ATEOF'
+extern
+#ifdef __cplusplus
+"C"
+#endif
+int inflate ();
+int main()
+{
+  return inflate ();
+}
+_ATEOF
+
+
+$CC $CPPFLAGS $CFLAGS -c main.c
+eval `$LIBTOOL --config | $EGREP '^(sys_lib_search_path_spec)='`
+eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+no_libz=:
+for path in $sys_lib_search_path; do
+  if $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -L$path -lz
+  then
+    { set +x
+$as_echo "$at_srcdir/search-path.at:47: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT -lz"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -lz" "search-path.at:47"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -lz
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/search-path.at:47"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    no_libz=false
+    break
+  fi
+done
+
+# If -lz doesn't exist (hello, cross compiler!), we need a dummy test.
+if $no_libz; then
+  { set +x
+$as_echo "$at_srcdir/search-path.at:56: exit 77"
+at_fn_check_prepare_trace "search-path.at:56"
+( $at_check_trace; exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/search-path.at:56"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_46
+#AT_START_47
+at_fn_group_banner 47 'search-path.at:62' \
+  "sys_lib_search_path on w32" "                     " 3
+at_xfail=no
+(
+  $as_echo "47. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# Check if libtool knows the path to system libraries.  Using
+# a w32 system library since the test is designed to check if
+# the libtool handling of the sys_lib_search_path variable is
+# correct for MSVC.
+
+LDFLAGS="$LDFLAGS -no-undefined"
+
+cat >gc.c <<'_ATEOF'
+#include <windows.h>
+HCURSOR get_cursor (void)
+{
+  return GetCursor ();
+}
+_ATEOF
+
+
+eval "`$LIBTOOL --config | grep '^build_libtool_libs='`"
+{ set +x
+$as_echo "$at_srcdir/search-path.at:81: test \"\$build_libtool_libs\" = yes || exit 77"
+at_fn_check_prepare_dynamic "test \"$build_libtool_libs\" = yes || exit 77" "search-path.at:81"
+( $at_check_trace; test "$build_libtool_libs" = yes || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/search-path.at:81"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/search-path.at:83: \$LIBTOOL --mode=compile --tag=CC \\
+	  \$CC \$CPPFLAGS \$CFLAGS -o gc.lo -c gc.c || exit 77"
+at_fn_check_prepare_notrace 'an embedded newline' "search-path.at:83"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC \
+	  $CC $CPPFLAGS $CFLAGS -o gc.lo -c gc.c || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/search-path.at:83"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Ok, compile was fine, then it should be possible to link too.
+
+{ set +x
+$as_echo "$at_srcdir/search-path.at:89: \$LIBTOOL --mode=link --tag=CC --tag=disable-static \\
+	  \$CC \$CFLAGS \$LDFLAGS -o libgc.la gc.lo -rpath /nowhere -luser32"
+at_fn_check_prepare_notrace 'an embedded newline' "search-path.at:89"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC --tag=disable-static \
+	  $CC $CFLAGS $LDFLAGS -o libgc.la gc.lo -rpath /nowhere -luser32
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/search-path.at:89"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# If -luser32 was found, then libtool will build a shared library,
+# otherwise libtool will fall back to creating a static library.
+{ set +x
+$as_echo "$at_srcdir/search-path.at:95: grep old_library=\\'\\' libgc.la"
+at_fn_check_prepare_trace "search-path.at:95"
+( $at_check_trace; grep old_library=\'\' libgc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/search-path.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_47
+#AT_START_48
+at_fn_group_banner 48 'indirect_deps.at:25' \
+  "indirect convenience" "                           " 3
+at_xfail=no
+(
+  $as_echo "48. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >a.c <<'_ATEOF'
+
+#include <math.h>
+int a () { return 0; }
+double ad (double x) { return sin (x); }
+_ATEOF
+
+cat >b.c <<'_ATEOF'
+
+extern int a ();
+extern double ad (double);
+int b () { return a () + (int) ad (0.0); }
+_ATEOF
+
+cat >c.c <<'_ATEOF'
+
+extern int b ();
+int c () { return b (); }
+_ATEOF
+
+cat >m.c <<'_ATEOF'
+
+extern int c ();
+int main () { return c (); }
+_ATEOF
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+for file in a.c b.c c.c; do
+  $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c $file
+done
+$CC $CPPFLAGS $CFLAGS -c m.c
+
+# liba is an indirect dependency of libd and of libconv.
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath /nowhere -lm
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libb.la b.lo liba.la -rpath /nowhere
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libconv.la c.lo libb.la
+$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o libd.la libconv.la -rpath /nowhere
+
+for st in '' -static; do
+  { set +x
+$as_echo "$at_srcdir/indirect_deps.at:60: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS \$st -o m1\$EXEEXT m.\$OBJEXT libd.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m1$EXEEXT m.$OBJEXT libd.la" "indirect_deps.at:60"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m1$EXEEXT m.$OBJEXT libd.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/indirect_deps.at:60"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/indirect_deps.at:62: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS \$st -o m2\$EXEEXT m.\$OBJEXT libconv.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m2$EXEEXT m.$OBJEXT libconv.la" "indirect_deps.at:62"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m2$EXEEXT m.$OBJEXT libconv.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/indirect_deps.at:62"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./m1; if test -f "./m1$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/indirect_deps.at:64: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "indirect_deps.at:64"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/indirect_deps.at:64"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  lt_exe=./m2; if test -f "./m2$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/indirect_deps.at:65: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "indirect_deps.at:65"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/indirect_deps.at:65"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_48
+#AT_START_49
+at_fn_group_banner 49 'indirect_deps.at:71' \
+  "indirect uninstalled" "                           " 3
+at_xfail=no
+(
+  $as_echo "49. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >a.c <<'_ATEOF'
+
+int a () { return 0; }
+_ATEOF
+
+cat >b.c <<'_ATEOF'
+
+extern int a ();
+int b () { return a (); }
+_ATEOF
+
+cat >c.c <<'_ATEOF'
+
+extern int b ();
+int c () { return b (); }
+_ATEOF
+
+
+cat >m1.c <<'_ATEOF'
+
+extern int b ();
+int main () { return b (); }
+_ATEOF
+
+cat >m2.c <<'_ATEOF'
+
+extern int c ();
+int main () { return c (); }
+_ATEOF
+
+
+mkdir a b c
+LDFLAGS="$LDFLAGS -no-undefined"
+for file in a.c b.c c.c; do
+  $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c $file
+done
+for file in m1.c m2.c; do
+  $CC $CPPFLAGS $CFLAGS -c $file
+done
+
+for st in '' -static; do
+  $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o a/liba.la a.lo -rpath /nowherea
+  $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o b/libb.la b.lo a/liba.la -rpath /nowhereb
+  $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o c/libcee.la c.lo b/libb.la -rpath /nowherec
+
+  { set +x
+$as_echo "$at_srcdir/indirect_deps.at:109: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS \$st -o m1\$EXEEXT m1.\$OBJEXT b/libb.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m1$EXEEXT m1.$OBJEXT b/libb.la" "indirect_deps.at:109"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m1$EXEEXT m1.$OBJEXT b/libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/indirect_deps.at:109"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/indirect_deps.at:111: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS \$st -o m2\$EXEEXT m2.\$OBJEXT c/libcee.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m2$EXEEXT m2.$OBJEXT c/libcee.la" "indirect_deps.at:111"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS $st -o m2$EXEEXT m2.$OBJEXT c/libcee.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/indirect_deps.at:111"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./m1; if test -f "./m1$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/indirect_deps.at:113: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "indirect_deps.at:113"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/indirect_deps.at:113"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  lt_exe=./m2; if test -f "./m2$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/indirect_deps.at:114: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "indirect_deps.at:114"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/indirect_deps.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_49
+#AT_START_50
+at_fn_group_banner 50 'archive-in-archive.at:26' \
+  "static library contains static library" "         " 3
+at_xfail=no
+      case $AR in ar-lib\ * | *[/\\]ar-lib\ *) false;; *) :;; esac && at_xfail=yes
+(
+  $as_echo "50. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# This test passes with MS lib.
+
+
+cat >foo.c <<'_ATEOF'
+
+int foo() { return 1;}
+_ATEOF
+
+
+cat >bar.c <<'_ATEOF'
+
+int bar() { return 1;}
+_ATEOF
+
+
+thisdir=`cd . && pwd`
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o foo.lo foo.c
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o bar.lo bar.c
+$LIBTOOL --mode=link --tag=CC --tag=disable-shared $CC $CFLAGS $LDFLAGS \
+-o libfoo.la foo.lo -version-info 1:0:0 -rpath $thisdir
+$LIBTOOL --mode=install cp libfoo.la $thisdir
+eval `$EGREP '^(old_library)=' < libfoo.la`
+libfoo=$old_library
+{ set +x
+$as_echo "$at_srcdir/archive-in-archive.at:50: \$LIBTOOL --mode=link --tag=CC --tag=disable-shared \$CC \$CFLAGS \$LDFLAGS \\
+	 -o libbar.la bar.lo \$libfoo -version-info 1:0:0 -rpath \$thisdir"
+at_fn_check_prepare_notrace 'an embedded newline' "archive-in-archive.at:50"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC --tag=disable-shared $CC $CFLAGS $LDFLAGS \
+	 -o libbar.la bar.lo $libfoo -version-info 1:0:0 -rpath $thisdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/archive-in-archive.at:50"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/archive-in-archive.at:53: \$LIBTOOL --mode=install cp libbar.la \$thisdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp libbar.la $thisdir" "archive-in-archive.at:53"
+( $at_check_trace; $LIBTOOL --mode=install cp libbar.la $thisdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/archive-in-archive.at:53"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+eval `$EGREP '^(old_library)=' < libbar.la`
+libbar=$old_library
+{ set +x
+$as_echo "$at_srcdir/archive-in-archive.at:56: \$AR -t \$libbar | grep \$libfoo"
+at_fn_check_prepare_notrace 'a shell pipeline' "archive-in-archive.at:56"
+( $at_check_trace; $AR -t $libbar | grep $libfoo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/archive-in-archive.at:56"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/archive-in-archive.at:57: \$AR -t \$libbar | grep foo.\$OBJEXT"
+at_fn_check_prepare_notrace 'a shell pipeline' "archive-in-archive.at:57"
+( $at_check_trace; $AR -t $libbar | grep foo.$OBJEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/archive-in-archive.at:57"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/archive-in-archive.at:58: \$AR -t \$libbar | grep bar.\$OBJEXT"
+at_fn_check_prepare_notrace 'a shell pipeline' "archive-in-archive.at:58"
+( $at_check_trace; $AR -t $libbar | grep bar.$OBJEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/archive-in-archive.at:58"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_50
+#AT_START_51
+at_fn_group_banner 51 'exeext.at:26' \
+  "both of -o prog and -o prog\$EXEEXT work" "        " 3
+at_xfail=no
+(
+  $as_echo "51. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+{ set +x
+$as_echo "$at_srcdir/exeext.at:29: test -n \"\$EXEEXT\" || exit 77"
+at_fn_check_prepare_dynamic "test -n \"$EXEEXT\" || exit 77" "exeext.at:29"
+( $at_check_trace; test -n "$EXEEXT" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/exeext.at:29"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+bin=`pwd`/bin
+binext=`pwd`/binext
+mkdir src $bin srcext $binext
+
+cat >src/prog.c <<'_ATEOF'
+
+int main(void) { return 0; }
+_ATEOF
+
+
+$CC $CPPFLAGS $CFLAGS -c src/prog.c -o src/prog.$OBJEXT
+
+{ set +x
+$as_echo "$at_srcdir/exeext.at:42: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o src/prog src/prog.\$OBJEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/prog src/prog.$OBJEXT" "exeext.at:42"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o src/prog src/prog.$OBJEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exeext.at:42"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/exeext.at:44: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o srcext/prog\$EXEEXT src/prog.\$OBJEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o srcext/prog$EXEEXT src/prog.$OBJEXT" "exeext.at:44"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o srcext/prog$EXEEXT src/prog.$OBJEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exeext.at:44"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+$LIBTOOL --mode=install cp src/prog $bin/prog
+$LIBTOOL --mode=install cp srcext/prog$EXEEXT $binext/prog$EXEEXT
+
+lt_exe=$bin/prog; if test -f "$bin/prog$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/exeext.at:50: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "exeext.at:50"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/exeext.at:50"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=$binext/prog$EXEEXT; if test -f "$binext/prog$EXEEXT$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/exeext.at:51: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "exeext.at:51"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/exeext.at:51"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_51
+#AT_START_52
+at_fn_group_banner 52 'execute-mode.at:25' \
+  "execute mode" "                                   " 3
+at_xfail=no
+(
+  $as_echo "52. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+eval `$LIBTOOL --config | $EGREP '^(FGREP)='`
+
+cat >foo <<'_ATEOF'
+#! /bin/sh
+if test $# -gt 0; then
+  for arg
+  do
+    printf %s\\n "$arg"
+  done
+else
+  :
+fi
+_ATEOF
+
+
+cat >lt-wrapper <<'_ATEOF'
+#! /bin/sh
+# Generated by GNU libtool.
+# fake wrapper script.
+program=lt-real
+progdir=.
+if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
+  # Run the actual program with our arguments.
+  exec "$progdir/$program" ${1+"$@"}
+  echo "$0: cannot exec $program $*" >&2
+  exit 1
+fi
+_ATEOF
+
+
+cat >lt-real <<'_ATEOF'
+#! /bin/sh
+for arg
+do
+  printf %s\\n "$arg"
+done
+cat
+_ATEOF
+
+
+cat >libfakelib.la <<'_ATEOF'
+# libfakelib.la - a libtool library file
+# Generated by ltmain.sh (GNU libtool 1.2605 2008/03/04 22:31:32) 2.3a
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+dlname=''
+library_names=''
+old_library='libfakelib.a'
+inherited_linker_flags=''
+dependency_libs=''
+weak_library_names=''
+current=
+age=
+revision=
+installed=no
+shouldnotlink=yes
+dlopen=''
+dlpreopen=''
+libdir=''
+_ATEOF
+
+
+mkdir sub
+cp foo sub/foo
+chmod +x foo sub/foo lt-wrapper lt-real
+
+cat >liba.c <<'_ATEOF'
+int a () { return 0; }
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+#include <stdio.h>
+extern int a ();
+int main (int argc, char **argv)
+{
+  int i;
+  for (i=1; i<argc; ++i)
+    {
+      if (i != 1)
+	fputc ('\n', stdout);
+      fputs (argv[i], stdout);
+    }
+  fputc ('\n', stdout);
+  return a ();
+}
+_ATEOF
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+instdir=`pwd`/inst
+libdir=$instdir/lib
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:117: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c liba.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c" "execute-mode.at:117"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:117"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:119: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la -rpath \$libdir liba.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la -rpath $libdir liba.lo" "execute-mode.at:119"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la -rpath $libdir liba.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:119"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:121: \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c main.c" "execute-mode.at:121"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:121"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:123: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la" "execute-mode.at:123"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:123"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# end of preparatory blurb.
+# Now, when doing the tests, we both try the fake wrappers plus the real one
+# (only the latter exposes the C wrappers used for w32 systems).
+# With the latter, however, we need to ignore additional output; esp. wine
+# may be rather noisy.
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:132: \$LIBTOOL --mode=execute ./foo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute ./foo" "execute-mode.at:132"
+( $at_check_trace; $LIBTOOL --mode=execute ./foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:132"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:133: \$LIBTOOL --mode=execute sub/foo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute sub/foo" "execute-mode.at:133"
+( $at_check_trace; $LIBTOOL --mode=execute sub/foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:133"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:134: \$LIBTOOL --mode=execute ./foo foo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute ./foo foo" "execute-mode.at:134"
+( $at_check_trace; $LIBTOOL --mode=execute ./foo foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo >>"$at_stdout"; $as_echo "foo
+" | \
+  $at_diff - "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:134"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:136: \$LIBTOOL --mode=execute ./lt-wrapper foo </dev/null"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute ./lt-wrapper foo </dev/null" "execute-mode.at:136"
+( $at_check_trace; $LIBTOOL --mode=execute ./lt-wrapper foo </dev/null
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo >>"$at_stdout"; $as_echo "foo
+" | \
+  $at_diff - "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:136"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:138: cd sub && \$LIBTOOL --mode=execute ./foo ../foo"
+at_fn_check_prepare_dynamic "cd sub && $LIBTOOL --mode=execute ./foo ../foo" "execute-mode.at:138"
+( $at_check_trace; cd sub && $LIBTOOL --mode=execute ./foo ../foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo >>"$at_stdout"; $as_echo "../foo
+" | \
+  $at_diff - "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:138"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# suppose that ./foo is gdb, and lt-wrapper is the wrapper script.
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:141: \$LIBTOOL --mode=execute ./foo lt-wrapper bar baz </dev/null"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute ./foo lt-wrapper bar baz </dev/null" "execute-mode.at:141"
+( $at_check_trace; $LIBTOOL --mode=execute ./foo lt-wrapper bar baz </dev/null
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo >>"$at_stdout"; $as_echo "./lt-real
+bar
+baz
+" | \
+  $at_diff - "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:141"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# check that stdin works even with -dlopen.
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:148: echo bar | \$LIBTOOL --mode=execute -dlopen libfakelib.la ./lt-wrapper foo"
+at_fn_check_prepare_notrace 'a shell pipeline' "execute-mode.at:148"
+( $at_check_trace; echo bar | $LIBTOOL --mode=execute -dlopen libfakelib.la ./lt-wrapper foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo >>"$at_stdout"; $as_echo "foo
+bar
+" | \
+  $at_diff - "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:148"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Check that a missing real program causes an error.
+# The error message and code are likely to be 126,
+# "No such file or directory" but system-dependent.
+mv -f lt-real lt-backup
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:157: \$LIBTOOL --mode=execute ./lt-wrapper foo </dev/null || exit 1"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute ./lt-wrapper foo </dev/null || exit 1" "execute-mode.at:157"
+( $at_check_trace; $LIBTOOL --mode=execute ./lt-wrapper foo </dev/null || exit 1
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/execute-mode.at:157"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+mv -f lt-backup lt-real
+
+# Now use arguments that require decent quoting.
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:162: \$LIBTOOL --mode=execute ./foo \"arg  with special chars: \\\$!&*\\\`'()\""
+at_fn_check_prepare_notrace 'a `...` command substitution' "execute-mode.at:162"
+( $at_check_trace; $LIBTOOL --mode=execute ./foo "arg  with special chars: \$!&*\`'()"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo >>"$at_stdout"; $as_echo "arg  with special chars: \$!&*\`'()
+" | \
+  $at_diff - "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:162"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:165: \$LIBTOOL --mode=execute ./lt-wrapper \"arg  with special chars: \\\$!&*\\\`'()\" </dev/null"
+at_fn_check_prepare_notrace 'a `...` command substitution' "execute-mode.at:165"
+( $at_check_trace; $LIBTOOL --mode=execute ./lt-wrapper "arg  with special chars: \$!&*\`'()" </dev/null
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo >>"$at_stdout"; $as_echo "arg  with special chars: \$!&*\`'()
+" | \
+  $at_diff - "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:165"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:168: \$LIBTOOL --mode=execute ./foo lt-wrapper \"arg  with special chars: \\\$!&*\\\`'()\""
+at_fn_check_prepare_notrace 'a `...` command substitution' "execute-mode.at:168"
+( $at_check_trace; $LIBTOOL --mode=execute ./foo lt-wrapper "arg  with special chars: \$!&*\`'()"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo >>"$at_stdout"; $as_echo "./lt-real
+arg  with special chars: \$!&*\`'()
+" | \
+  $at_diff - "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:168"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:172: if \$LIBTOOL --mode=execute  \"\$lt_exe\" \"arg  with special chars: \\\$!&*\\\`'()\"; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_notrace 'a `...` command substitution' "execute-mode.at:172"
+( $at_check_trace; if $LIBTOOL --mode=execute  "$lt_exe" "arg  with special chars: \$!&*\`'()"; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:172"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:174: \$FGREP 'arg  with special chars: \$!&*\`'\\''()' stdout"
+at_fn_check_prepare_notrace 'a `...` command substitution' "execute-mode.at:174"
+( $at_check_trace; $FGREP 'arg  with special chars: $!&*`'\''()' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:174"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# We always pair two args.  The first one is never the empty string.
+arg1=
+for arg2 in \
+   'def ghi' '' \
+   'd"e' 'f"g' \
+   'd\"e' 'f\"g' \
+   'd\\"e' 'f\\"g' \
+   'd\\\"e' 'f\\\"g' \
+   'd\' '' \
+   'd\\' '' \
+   'd\\\' '' \
+   'd\\\\' '' \
+   '<' '>' \
+   '<def>' ''
+do
+  if test -z "$arg1"; then
+    arg1=$arg2; continue
+  fi
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:194: \$LIBTOOL --mode=execute ./foo abc \"\$arg1\" \"\$arg2\" xyz"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute ./foo abc \"$arg1\" \"$arg2\" xyz" "execute-mode.at:194"
+( $at_check_trace; $LIBTOOL --mode=execute ./foo abc "$arg1" "$arg2" xyz
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:194"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:195: \$FGREP \"\$arg1\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \"$arg1\" stdout" "execute-mode.at:195"
+( $at_check_trace; $FGREP "$arg1" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:195"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:196: test -z \"\$arg2\" || \$FGREP \"\$arg2\" stdout"
+at_fn_check_prepare_dynamic "test -z \"$arg2\" || $FGREP \"$arg2\" stdout" "execute-mode.at:196"
+( $at_check_trace; test -z "$arg2" || $FGREP "$arg2" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:196"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:197: test \`sed -n '/^abc\$/,/^xyz\$/p' stdout | wc -l\` -eq 4"
+at_fn_check_prepare_notrace 'a `...` command substitution' "execute-mode.at:197"
+( $at_check_trace; test `sed -n '/^abc$/,/^xyz$/p' stdout | wc -l` -eq 4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:197"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:198: \$LIBTOOL --mode=execute ./lt-wrapper abc \"\$arg1\" \"\$arg2\" xyz </dev/null"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute ./lt-wrapper abc \"$arg1\" \"$arg2\" xyz </dev/null" "execute-mode.at:198"
+( $at_check_trace; $LIBTOOL --mode=execute ./lt-wrapper abc "$arg1" "$arg2" xyz </dev/null
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:198"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:199: \$FGREP \"\$arg1\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \"$arg1\" stdout" "execute-mode.at:199"
+( $at_check_trace; $FGREP "$arg1" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:199"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:200: test -z \"\$arg2\" || \$FGREP \"\$arg2\" stdout"
+at_fn_check_prepare_dynamic "test -z \"$arg2\" || $FGREP \"$arg2\" stdout" "execute-mode.at:200"
+( $at_check_trace; test -z "$arg2" || $FGREP "$arg2" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:200"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:201: test \`sed -n '/^abc\$/,/^xyz\$/p' stdout | wc -l\` -eq 4"
+at_fn_check_prepare_notrace 'a `...` command substitution' "execute-mode.at:201"
+( $at_check_trace; test `sed -n '/^abc$/,/^xyz$/p' stdout | wc -l` -eq 4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:201"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:202: \$LIBTOOL --mode=execute ./foo lt-wrapper abc \"\$arg1\" \"\$arg2\" xyz"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute ./foo lt-wrapper abc \"$arg1\" \"$arg2\" xyz" "execute-mode.at:202"
+( $at_check_trace; $LIBTOOL --mode=execute ./foo lt-wrapper abc "$arg1" "$arg2" xyz
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:202"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:203: \$FGREP \"\$arg1\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \"$arg1\" stdout" "execute-mode.at:203"
+( $at_check_trace; $FGREP "$arg1" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:204: test -z \"\$arg2\" || \$FGREP \"\$arg2\" stdout"
+at_fn_check_prepare_dynamic "test -z \"$arg2\" || $FGREP \"$arg2\" stdout" "execute-mode.at:204"
+( $at_check_trace; test -z "$arg2" || $FGREP "$arg2" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:205: test \`sed -n '/^abc\$/,/^xyz\$/p' stdout | wc -l\` -eq 4"
+at_fn_check_prepare_notrace 'a `...` command substitution' "execute-mode.at:205"
+( $at_check_trace; test `sed -n '/^abc$/,/^xyz$/p' stdout | wc -l` -eq 4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:206: \$LIBTOOL --mode=execute ./main\$EXEEXT abc \"\$arg1\" \"\$arg2\" xyz"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute ./main$EXEEXT abc \"$arg1\" \"$arg2\" xyz" "execute-mode.at:206"
+( $at_check_trace; $LIBTOOL --mode=execute ./main$EXEEXT abc "$arg1" "$arg2" xyz
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:206"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:207: \$FGREP \"\$arg1\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \"$arg1\" stdout" "execute-mode.at:207"
+( $at_check_trace; $FGREP "$arg1" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:207"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:208: test -z \"\$arg2\" || \$FGREP \"\$arg2\" stdout"
+at_fn_check_prepare_dynamic "test -z \"$arg2\" || $FGREP \"$arg2\" stdout" "execute-mode.at:208"
+( $at_check_trace; test -z "$arg2" || $FGREP "$arg2" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:208"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  # Do not match EOL here, cross setups may have an extra \r here.
+  { set +x
+$as_echo "$at_srcdir/execute-mode.at:210: test \`sed -n '/^abc/,/^xyz/p' stdout | wc -l\` -eq 4"
+at_fn_check_prepare_notrace 'a `...` command substitution' "execute-mode.at:210"
+( $at_check_trace; test `sed -n '/^abc/,/^xyz/p' stdout | wc -l` -eq 4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:210"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  arg1=
+done
+
+# Check that .la files are not transformed by the wrapper searching loop.
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:215: \$LIBTOOL --mode=execute echo ./main\$EXEEXT liba.lo libfakelib.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=execute echo ./main$EXEEXT liba.lo libfakelib.la" "execute-mode.at:215"
+( $at_check_trace; $LIBTOOL --mode=execute echo ./main$EXEEXT liba.lo libfakelib.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:215"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# This could be .libs/lt-main or similar (or just plain `main').
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:217: grep main stdout"
+at_fn_check_prepare_trace "execute-mode.at:217"
+( $at_check_trace; grep main stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:217"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:218: grep liba.lo stdout"
+at_fn_check_prepare_trace "execute-mode.at:218"
+( $at_check_trace; grep liba.lo stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:218"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/execute-mode.at:219: grep libfakelib.la stdout"
+at_fn_check_prepare_trace "execute-mode.at:219"
+( $at_check_trace; grep libfakelib.la stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/execute-mode.at:219"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_52
+#AT_START_53
+at_fn_group_banner 53 'bindir.at:64' \
+  "bindir basic lib test" "                          " 3
+at_xfail=no
+(
+  $as_echo "53. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+bindirneeded=:
+case "$host_os" in
+  cygwin*|mingw*|cegcc*)
+    ;;
+  *)
+    bindirneeded=false
+    ;;
+esac
+
+####
+# These routines save the PATH before a test and restore it after,
+# prepending a chosen directory to the path on the platforms where
+# -bindir is needed after saving.
+#
+
+func_save_and_prepend_path ()
+{
+  save_PATH=$PATH
+  if $bindirneeded ; then
+    PATH=$1:$PATH
+  fi
+  export PATH
+}
+
+func_restore_path ()
+{
+  PATH=$save_PATH
+  export PATH
+}
+
+cat >foo.c <<'_ATEOF'
+
+int x=11;
+_ATEOF
+
+
+cat >baz.c <<'_ATEOF'
+
+extern int x;
+int baz (void);
+int baz (void) { return x;}
+_ATEOF
+
+
+cat >bar.c <<'_ATEOF'
+
+extern int baz (void);
+int y=3;
+int bar (void);
+int bar (void) { return y + baz ();}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+
+#include <stdlib.h>
+extern int baz (void);
+extern int bar (void);
+int main() {
+if (baz () + bar () - 25) abort ();
+return 0;
+}
+_ATEOF
+
+
+
+curdir=`pwd`
+eval "`$LIBTOOL --config | grep '^objdir='`"
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:127: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o foo.lo \$CPPFLAGS \$CFLAGS foo.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o foo.lo $CPPFLAGS $CFLAGS foo.c" "bindir.at:127"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o foo.lo $CPPFLAGS $CFLAGS foo.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:127"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:128: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o baz.lo \$CPPFLAGS \$CFLAGS baz.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o baz.lo $CPPFLAGS $CFLAGS baz.c" "bindir.at:128"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o baz.lo $CPPFLAGS $CFLAGS baz.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:128"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:129: \$LIBTOOL --mode=link --tag=CC \$CC -no-undefined -o libfoo.la \$CPPFLAGS \$CFLAGS \$LDFLAGS foo.lo baz.lo -rpath \$curdir/\$objdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC -no-undefined -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS foo.lo baz.lo -rpath $curdir/$objdir" "bindir.at:129"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC -no-undefined -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS foo.lo baz.lo -rpath $curdir/$objdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:129"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:131: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o bar.lo \$CPPFLAGS \$CFLAGS bar.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o bar.lo $CPPFLAGS $CFLAGS bar.c" "bindir.at:131"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o bar.lo $CPPFLAGS $CFLAGS bar.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:131"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:132: \$LIBTOOL --mode=link --tag=CC \$CC -no-undefined -o libbar.la \$CPPFLAGS \$CFLAGS \$LDFLAGS bar.lo libfoo.la -rpath \$curdir/\$objdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC -no-undefined -o libbar.la $CPPFLAGS $CFLAGS $LDFLAGS bar.lo libfoo.la -rpath $curdir/$objdir" "bindir.at:132"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC -no-undefined -o libbar.la $CPPFLAGS $CFLAGS $LDFLAGS bar.lo libfoo.la -rpath $curdir/$objdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:132"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:134: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o main.lo \$CPPFLAGS \$CFLAGS main.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o main.lo $CPPFLAGS $CFLAGS main.c" "bindir.at:134"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o main.lo $CPPFLAGS $CFLAGS main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:134"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:135: \$LIBTOOL --mode=link --tag=CC \$CC -o main\$EXEEXT \$CPPFLAGS \$CFLAGS \$LDFLAGS main.lo libbar.la libfoo.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS main.lo libbar.la libfoo.la" "bindir.at:135"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS main.lo libbar.la libfoo.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:135"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Check both static and shared versions run.  We don't install them
+# here, that will be covered by the later tests; we've rpath'd things
+# so that they can all be run in situ.
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/bindir.at:141: if \$LIBTOOL --mode=execute  \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=execute  \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "bindir.at:141"
+( $at_check_trace; if $LIBTOOL --mode=execute  "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:141"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# Ensure libraries can be found on PATH, if we are on one
+# of the affected platforms, before testing the shared version.
+
+func_save_and_prepend_path $curdir/$objdir
+$bindirneeded && {
+  lt_exe=$objdir/main; if test -f "$objdir/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/bindir.at:148: if \$LIBTOOL --mode=execute  \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=execute  \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "bindir.at:148"
+( $at_check_trace; if $LIBTOOL --mode=execute  "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:148"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+}
+
+#  In fact, prepending the PATH as above is superfluous on the windows
+# platforms that this feature is primarily aimed at, as the DLL search
+# path always includes the directory from which the app was launched.
+# To make sure it still works even when not side-by-side, we'll install
+# the main executable and execute it from there while the PATH still
+# points to the shared libs in the .libs subdir.  On other platforms,
+# the rpaths we set at link time will guarantee it runs from the bindir.
+
+mkdir $curdir/bin
+{ set +x
+$as_echo "$at_srcdir/bindir.at:160: \$LIBTOOL --mode=install \$lt_INSTALL main\$EXEEXT \$curdir/bin/main\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install $lt_INSTALL main$EXEEXT $curdir/bin/main$EXEEXT" "bindir.at:160"
+( $at_check_trace; $LIBTOOL --mode=install $lt_INSTALL main$EXEEXT $curdir/bin/main$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:160"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=$curdir/bin/main$EXEEXT; if test -f "$curdir/bin/main$EXEEXT$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/bindir.at:161: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "bindir.at:161"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:161"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+func_restore_path
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_53
+#AT_START_54
+at_fn_group_banner 54 'bindir.at:173' \
+  "bindir install tests" "                           " 3
+at_xfail=no
+(
+  $as_echo "54. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+bindirneeded=:
+case "$host_os" in
+  cygwin*|mingw*|cegcc*)
+    ;;
+  *)
+    bindirneeded=false
+    ;;
+esac
+
+eval "`$LIBTOOL --config | grep '^build_libtool_libs='`"
+{ set +x
+$as_echo "$at_srcdir/bindir.at:185: test \"\$build_libtool_libs\" = yes || exit 77"
+at_fn_check_prepare_dynamic "test \"$build_libtool_libs\" = yes || exit 77" "bindir.at:185"
+( $at_check_trace; test "$build_libtool_libs" = yes || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:185"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+####
+# These routines save the PATH before a test and restore it after,
+# prepending a chosen directory to the path on the platforms where
+# -bindir is needed after saving.
+#
+
+func_save_and_prepend_path ()
+{
+  save_PATH=$PATH
+  if $bindirneeded ; then
+    PATH=$1:$PATH
+  fi
+  export PATH
+}
+
+func_restore_path ()
+{
+  PATH=$save_PATH
+  export PATH
+}
+
+cat >foo.c <<'_ATEOF'
+
+int x=11;
+_ATEOF
+
+
+cat >baz.c <<'_ATEOF'
+
+extern int x;
+int baz (void);
+int baz (void) { return x;}
+_ATEOF
+
+
+cat >bar.c <<'_ATEOF'
+
+extern int baz (void);
+int y=3;
+int bar (void);
+int bar (void) { return y + baz ();}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+
+#include <stdlib.h>
+extern int baz (void);
+extern int bar (void);
+int main() {
+if (baz () + bar () - 25) abort ();
+return 0;
+}
+_ATEOF
+
+
+# We only need to compile once, but we'll need to relink for each different value
+# of libdir in order to set the rpath, and we'll install for each combination of
+# libdir and bindir.
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:239: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o foo.lo \$CPPFLAGS \$CFLAGS foo.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o foo.lo $CPPFLAGS $CFLAGS foo.c" "bindir.at:239"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o foo.lo $CPPFLAGS $CFLAGS foo.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:239"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:240: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o baz.lo \$CPPFLAGS \$CFLAGS baz.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o baz.lo $CPPFLAGS $CFLAGS baz.c" "bindir.at:240"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o baz.lo $CPPFLAGS $CFLAGS baz.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:240"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:241: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o bar.lo \$CPPFLAGS \$CFLAGS bar.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o bar.lo $CPPFLAGS $CFLAGS bar.c" "bindir.at:241"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o bar.lo $CPPFLAGS $CFLAGS bar.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:241"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/bindir.at:242: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o main.lo \$CPPFLAGS \$CFLAGS main.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o main.lo $CPPFLAGS $CFLAGS main.c" "bindir.at:242"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o main.lo $CPPFLAGS $CFLAGS main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:242"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Now try installing the libs.  There are the following cases:
+# No -bindir
+# -bindir below lib install dir
+# -bindir is lib install dir
+# -bindir beside lib install dir
+# -bindir above lib dir
+# -bindir above and beside lib dir
+# -bindir in entirely unrelated prefix.
+
+curdir=`pwd`
+for libdir in \
+	$curdir/usr/lib/gcc/i686-pc-cygwin/4.5.0 \
+	$curdir/usr/lib/gcc/../gcc/.//i686-pc-cygwin/4.5.0/../../././//. \
+	$curdir/usr/lib/ \
+	$curdir/usr/lib \
+	$curdir/baz \
+	$curdir/baz/lib/ ;
+do
+
+  # Do a basic install with no -bindir option for reference.  We use the sbin/
+  # dir for the main exe to avoid the potential "this only works because it's
+  # side-by-side with the libs" default DLL search path problem mentioned above.
+  rm -rf $libdir $curdir/bin $curdir/sbin $curdir/baz $curdir/usr
+  as_dir=$libdir; as_fn_mkdir_p
+  as_dir=$curdir/sbin; as_fn_mkdir_p
+  { set +x
+$as_echo "$at_srcdir/bindir.at:269: \$LIBTOOL --mode=link --tag=CC \$CC -no-undefined -o libfoo.la \$CPPFLAGS \$CFLAGS \$LDFLAGS foo.lo bar.lo baz.lo -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC -no-undefined -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS foo.lo bar.lo baz.lo -rpath $libdir" "bindir.at:269"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC -no-undefined -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS foo.lo bar.lo baz.lo -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:269"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/bindir.at:270: \$LIBTOOL --mode=link --tag=CC \$CC -o main\$EXEEXT \$CPPFLAGS \$CFLAGS \$LDFLAGS main.lo libfoo.la -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS main.lo libfoo.la -rpath $libdir" "bindir.at:270"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS main.lo libfoo.la -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:270"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/bindir.at:271: \$LIBTOOL --mode=install \$lt_INSTALL libfoo.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install $lt_INSTALL libfoo.la $libdir" "bindir.at:271"
+( $at_check_trace; $LIBTOOL --mode=install $lt_INSTALL libfoo.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:271"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/bindir.at:272: \$LIBTOOL --mode=install \$lt_INSTALL main\$EXEEXT \$curdir/sbin/main\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install $lt_INSTALL main$EXEEXT $curdir/sbin/main$EXEEXT" "bindir.at:272"
+( $at_check_trace; $LIBTOOL --mode=install $lt_INSTALL main$EXEEXT $curdir/sbin/main$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:272"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  # And ensure it went where we expect.  Could be looking for any of
+  # 'cygfoo-0.dll', 'libfoo-0.dll', 'foo-0.dll', or 'libfoo.so.0'.  We'll
+  # simplify this check by taking advantage of the fact that if it's a DLL,
+  # it has to go in bindir, so we'll not check for both forms in libdir.
+  if $bindirneeded; then
+    { set +x
+$as_echo "$at_srcdir/bindir.at:279: test -f \$libdir/../bin/???foo-0.dll || ls \$libdir/../bin/*foo*0*"
+at_fn_check_prepare_dynamic "test -f $libdir/../bin/???foo-0.dll || ls $libdir/../bin/*foo*0*" "bindir.at:279"
+( $at_check_trace; test -f $libdir/../bin/???foo-0.dll || ls $libdir/../bin/*foo*0*
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:279"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  else
+    { set +x
+$as_echo "$at_srcdir/bindir.at:281: ls \$libdir/*foo*"
+at_fn_check_prepare_dynamic "ls $libdir/*foo*" "bindir.at:281"
+( $at_check_trace; ls $libdir/*foo*
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:281"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  fi
+
+  # And that it can be executed.
+  extrapath=
+  $bindirneeded && extrapath=$libdir/../bin
+  func_save_and_prepend_path $extrapath
+  lt_exe=$curdir/sbin/main$EXEEXT; if test -f "$curdir/sbin/main$EXEEXT$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/bindir.at:288: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "bindir.at:288"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:288"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  func_restore_path
+
+  for bindir in \
+	$curdir/usr/lib/gcc/i686-pc-cygwin/4.5.0/bin/ \
+	$curdir/usr/lib/gcc/i686-pc-cygwin/4.5.0/bin \
+	$curdir/usr/lib/gcc/i686-pc-cygwin/bin \
+	$curdir/usr/lib/bin \
+	$curdir/usr/bin/ \
+	$curdir/usr/bin \
+	/tmp/foo/bar ;
+  do
+
+    # Clear any old stuff out before we install.  Because bindir
+    # may be in /tmp, we have to take care to create it securely
+    # and not to delete and recreate it if we do.
+    rm -rf $libdir $curdir/bin $curdir/sbin $curdir/baz $curdir/usr
+
+    tmp=
+    case $bindir in
+      /tmp*)
+        # Create a temporary directory $tmp in $TMPDIR (default /tmp).
+        # Use mktemp if possible; otherwise fall back on mkdir,
+        # with $RANDOM to make collisions less likely.
+        : ${TMPDIR=/tmp}
+        {
+          tmp=`
+            (umask 077 && mktemp -d "$TMPDIR/fooXXXXXX") 2>/dev/null
+          ` &&
+          test -n "$tmp" && test -d "$tmp"
+        } || {
+          tmp=$TMPDIR/foo$$-$RANDOM
+          (umask 077 && mkdir "$tmp")
+        } || { set +x
+$as_echo "$at_srcdir/bindir.at:321: exit 77"
+at_fn_check_prepare_trace "bindir.at:321"
+( $at_check_trace; exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:321"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+        bindir=$tmp/bar
+      ;;
+      *)
+        # Clear any old stuff out before we install.
+        rm -rf $bindir
+        as_dir=$bindir; as_fn_mkdir_p
+      ;;
+    esac
+
+    # Relink with new rpaths.
+    { set +x
+$as_echo "$at_srcdir/bindir.at:332: \$LIBTOOL --mode=link --tag=CC \$CC -no-undefined -bindir \$bindir -o libfoo.la \$CPPFLAGS \$CFLAGS \$LDFLAGS foo.lo bar.lo baz.lo -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC -no-undefined -bindir $bindir -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS foo.lo bar.lo baz.lo -rpath $libdir" "bindir.at:332"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC -no-undefined -bindir $bindir -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS foo.lo bar.lo baz.lo -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:332"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/bindir.at:333: \$LIBTOOL --mode=link --tag=CC \$CC -o main\$EXEEXT \$CPPFLAGS \$CFLAGS \$LDFLAGS main.lo libfoo.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS main.lo libfoo.la" "bindir.at:333"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS main.lo libfoo.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:333"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+    # Recreate directories (bindir already done) and install.
+    as_dir=$libdir; as_fn_mkdir_p
+    as_dir=$curdir/sbin; as_fn_mkdir_p
+    { set +x
+$as_echo "$at_srcdir/bindir.at:338: \$LIBTOOL --mode=install \$lt_INSTALL libfoo.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install $lt_INSTALL libfoo.la $libdir" "bindir.at:338"
+( $at_check_trace; $LIBTOOL --mode=install $lt_INSTALL libfoo.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:338"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/bindir.at:339: \$LIBTOOL --mode=install \$lt_INSTALL main\$EXEEXT \$curdir/sbin/main\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install $lt_INSTALL main$EXEEXT $curdir/sbin/main$EXEEXT" "bindir.at:339"
+( $at_check_trace; $LIBTOOL --mode=install $lt_INSTALL main$EXEEXT $curdir/sbin/main$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:339"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+    # Ensure it went to bindir rather than default dir this time.
+    if $bindirneeded; then
+      { set +x
+$as_echo "$at_srcdir/bindir.at:343: test -f \$bindir/???foo-0.dll || ls \$bindir/*foo*0*"
+at_fn_check_prepare_dynamic "test -f $bindir/???foo-0.dll || ls $bindir/*foo*0*" "bindir.at:343"
+( $at_check_trace; test -f $bindir/???foo-0.dll || ls $bindir/*foo*0*
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:343"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    else
+      { set +x
+$as_echo "$at_srcdir/bindir.at:345: ls \$libdir/*foo*"
+at_fn_check_prepare_dynamic "ls $libdir/*foo*" "bindir.at:345"
+( $at_check_trace; ls $libdir/*foo*
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:345"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    fi
+
+    # And that it can be executed.
+    extrapath=
+    $bindirneeded && extrapath=$bindir
+    func_save_and_prepend_path $extrapath
+    lt_exe=$curdir/sbin/main$EXEEXT; if test -f "$curdir/sbin/main$EXEEXT$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/bindir.at:352: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "bindir.at:352"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/bindir.at:352"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+    func_restore_path
+
+    # Clean up if we made a temp dir.  Subdirs under our testdir get rm'd
+    # and recreated at the top of the loop.  Securely created subdirs under
+    # /tmp get created precisely once and rm'd when we're done with them.
+    if test ! -z "$tmp" ; then
+      rm -rf "$tmp"
+    fi
+
+  done
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_54
+#AT_START_55
+at_fn_group_banner 55 'cwrapper.at:25' \
+  "cwrapper for uninstalled executables" "           " 3
+at_xfail=no
+(
+  $as_echo "55. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# make sure existing libtool is configured for shared libraries
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:29: \$LIBTOOL --features | grep 'disable shared libraries' && exit 77"
+at_fn_check_prepare_notrace 'a shell pipeline' "cwrapper.at:29"
+( $at_check_trace; $LIBTOOL --features | grep 'disable shared libraries' && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/cwrapper.at:29"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+cat >trivial.c <<'_ATEOF'
+
+int main (void)
+{
+  return 0;
+}
+_ATEOF
+
+cat >liba.c <<'_ATEOF'
+int liba_func1 (int arg)
+{
+  return arg + 1;
+}
+_ATEOF
+
+cat >usea.c <<'_ATEOF'
+extern int liba_func1 (int arg);
+int main (void)
+{
+  int a = 2;
+  int b = liba_func1 (a);
+  if (b == 3) return 0;
+  return 1;
+}
+_ATEOF
+
+
+orig_CFLAGS=$CFLAGS
+orig_LIBTOOL=$LIBTOOL
+for restrictive_flags in '-Wall -Werror' '-std=c89 -Wall -Werror' '-std=c99 -Wall -Werror'; do
+  CFLAGS="$orig_CFLAGS $restrictive_flags"
+  sed "s/LTCFLAGS=.*/&' $restrictive_flags'/" < "$orig_LIBTOOL" > ./libtool
+  chmod +x libtool
+  LIBTOOL=./libtool
+
+  # Make sure $restrictive_flags do not cause a failure
+  # themselves (e.g. because a non-gcc compiler doesn't
+  # understand them).  Tru64 cc only fails when linking.
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS trivial.c || continue
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:69: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c liba.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c" "cwrapper.at:69"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:69"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:71: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -version-info=0.0.0 -no-undefined -o liba.la -rpath /foo liba.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -version-info=0.0.0 -no-undefined -o liba.la -rpath /foo liba.lo" "cwrapper.at:71"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -version-info=0.0.0 -no-undefined -o liba.la -rpath /foo liba.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:71"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:73: test -f liba.la"
+at_fn_check_prepare_trace "cwrapper.at:73"
+( $at_check_trace; test -f liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:73"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:75: \$CC \$CPPFLAGS \$CFLAGS -c usea.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c usea.c" "cwrapper.at:75"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c usea.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:75"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:77: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o usea\$EXEEXT usea.\$OBJEXT liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o usea$EXEEXT usea.$OBJEXT liba.la" "cwrapper.at:77"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o usea$EXEEXT usea.$OBJEXT liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:77"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./usea; if test -f "./usea$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:79: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "cwrapper.at:79"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:79"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+
+
+# Test run-time activation of wrapper debugging.
+# This is not part of the loop above, because we
+# need to check, not ignore, the output.
+CFLAGS="$orig_CFLAGS"
+LIBTOOL=$orig_LIBTOOL
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:89: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c liba.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c" "cwrapper.at:89"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:89"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:91: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -no-undefined -o liba.la -rpath /foo liba.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-undefined -o liba.la -rpath /foo liba.lo" "cwrapper.at:91"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-undefined -o liba.la -rpath /foo liba.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:91"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:93: test -f liba.la"
+at_fn_check_prepare_trace "cwrapper.at:93"
+( $at_check_trace; test -f liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:93"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:95: \$CC \$CPPFLAGS \$CFLAGS -c usea.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c usea.c" "cwrapper.at:95"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c usea.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:97: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o usea\$EXEEXT usea.\$OBJEXT liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o usea$EXEEXT usea.$OBJEXT liba.la" "cwrapper.at:97"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o usea$EXEEXT usea.$OBJEXT liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:97"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./usea; if test -f "./usea$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:99: if \"\$lt_exe\" --lt-debug; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" --lt-debug; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "cwrapper.at:99"
+( $at_check_trace; if "$lt_exe" --lt-debug; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:99"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+case $host_os in
+  mingw*)
+    tr -d '\015' < stderr > stderr.t
+    mv -f stderr.t stderr ;;
+esac
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:101: grep 'libtool wrapper' stderr"
+at_fn_check_prepare_trace "cwrapper.at:101"
+( $at_check_trace; grep 'libtool wrapper' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:101"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# Test compile-time activation of wrapper debugging.
+# We structure this test as a loop, so that we can 'break' out of it
+# if necessary -- even though the loop by design executes only once.
+for debugwrapper_flags in '-DLT_DEBUGWRAPPER'; do
+  CFLAGS="$orig_CFLAGS $debugwrapper_flags"
+  sed -e "s/LTCFLAGS=.*/&' $debugwrapper_flags'/" \
+      -e "s/^lt_option_debug=/lt_option_debug=1/" \
+    < "$orig_LIBTOOL" > ./libtool
+  LIBTOOL=./libtool
+
+  # Make sure $debugwrapper_flags do not cause a failure
+  # themselves (e.g. because a non-gcc compiler doesn't
+  # understand them).  Tru64 cc only fails when linking.
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS trivial.c || continue
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:119: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c liba.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c" "cwrapper.at:119"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:119"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:121: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -no-undefined -o liba.la -rpath /foo liba.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-undefined -o liba.la -rpath /foo liba.lo" "cwrapper.at:121"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-undefined -o liba.la -rpath /foo liba.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:121"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:123: test -f liba.la"
+at_fn_check_prepare_trace "cwrapper.at:123"
+( $at_check_trace; test -f liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:123"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:125: \$CC \$CPPFLAGS \$CFLAGS -c usea.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c usea.c" "cwrapper.at:125"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c usea.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:125"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:127: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o usea\$EXEEXT usea.\$OBJEXT liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o usea$EXEEXT usea.$OBJEXT liba.la" "cwrapper.at:127"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o usea$EXEEXT usea.$OBJEXT liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:127"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./usea; if test -f "./usea$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:129: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "cwrapper.at:129"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:129"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  case $host_os in
+  mingw*)
+    tr -d '\015' < stderr > stderr.t
+    mv -f stderr.t stderr ;;
+esac
+  { set +x
+$as_echo "$at_srcdir/cwrapper.at:131: grep 'libtool wrapper' stderr"
+at_fn_check_prepare_trace "cwrapper.at:131"
+( $at_check_trace; grep 'libtool wrapper' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:131"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_55
+#AT_START_56
+at_fn_group_banner 56 'cwrapper.at:138' \
+  "cwrapper string length" "                         " 3
+at_xfail=no
+(
+  $as_echo "56. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+eval "`$LIBTOOL --config | $EGREP '^(objdir)='`"
+
+cat >liba.c <<'_ATEOF'
+int liba_func1 (int arg)
+{
+  return arg + 1;
+}
+_ATEOF
+
+cat >usea.c <<'_ATEOF'
+extern int liba_func1 (int arg);
+int main (void)
+{
+  int a = 2;
+  int b = liba_func1 (a);
+  if (b == 3) return 0;
+  return 1;
+}
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:159: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c liba.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c" "cwrapper.at:159"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:159"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:161: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -no-undefined 	 -o liba.la -rpath /foo liba.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-undefined 	 -o liba.la -rpath /foo liba.lo" "cwrapper.at:161"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-undefined 	 -o liba.la -rpath /foo liba.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:161"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:164: \$CC \$CPPFLAGS \$CFLAGS -c usea.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c usea.c" "cwrapper.at:164"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c usea.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:164"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# Make sure PATH is at least 250 chars, which should force line breaks
+# in lt-usea.c.
+
+dirpath=
+save_IFS=$IFS
+IFS=$PATH_SEPARATOR
+for dirpath in $PATH; do
+  IFS=$save_IFS
+  break
+done
+IFS=$save_IFS
+
+until $ECHO "PATH=$PATH" | grep 'PATH=.\{250\}'; do
+  PATH="$PATH$PATH_SEPARATOR$dirpath"
+done
+export PATH
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:185: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -no-fast-install 	 -o usea\$EXEEXT usea.\$OBJEXT liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-fast-install 	 -o usea$EXEEXT usea.$OBJEXT liba.la" "cwrapper.at:185"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -no-fast-install 	 -o usea$EXEEXT usea.$OBJEXT liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:185"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Skip if no cwrapper is generated.
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:190: test -f \$objdir/lt-usea.c || exit 77"
+at_fn_check_prepare_dynamic "test -f $objdir/lt-usea.c || exit 77" "cwrapper.at:190"
+( $at_check_trace; test -f $objdir/lt-usea.c || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:190"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Try to make sure the test is relevant.
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:193: grep ' *fputs' \$objdir/lt-usea.c > /dev/null"
+at_fn_check_prepare_dynamic "grep ' *fputs' $objdir/lt-usea.c > /dev/null" "cwrapper.at:193"
+( $at_check_trace; grep ' *fputs' $objdir/lt-usea.c > /dev/null
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:193"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# Check for no overly long fputs.
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:195: grep ' *fputs.\\{250\\}' \$objdir/lt-usea.c"
+at_fn_check_prepare_dynamic "grep ' *fputs.\\{250\\}' $objdir/lt-usea.c" "cwrapper.at:195"
+( $at_check_trace; grep ' *fputs.\{250\}' $objdir/lt-usea.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/cwrapper.at:195"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_56
+#AT_START_57
+at_fn_group_banner 57 'cwrapper.at:201' \
+  "cwrapper and installed shared libraries" "        " 3
+at_xfail=no
+(
+  $as_echo "57. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# make sure existing libtool is configured for shared libraries
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:205: \$LIBTOOL --features | grep 'enable shared libraries' || exit 77"
+at_fn_check_prepare_notrace 'a shell pipeline' "cwrapper.at:205"
+( $at_check_trace; $LIBTOOL --features | grep 'enable shared libraries' || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+LDFLAGS="$LDFLAGS -no-undefined"
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+mkdir $inst $libdir $bindir
+
+# Build the library in a separate directory to avoid the special case
+# of loading from the current directory.
+
+mkdir foo
+cd foo
+# build and install "old" library version
+cat >a.c <<'_ATEOF'
+
+int liba_ver (void) { return 1; }
+_ATEOF
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:224: \$LIBTOOL --mode=compile --tag=CC \$CC \$CPPFLAGS \$CFLAGS -c a.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a.c" "cwrapper.at:224"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:224"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:226: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -version-info=0.0.0 -o liba.la -rpath \$libdir a.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -version-info=0.0.0 -o liba.la -rpath $libdir a.lo" "cwrapper.at:226"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -version-info=0.0.0 -o liba.la -rpath $libdir a.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:226"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:228: \$LIBTOOL --mode=install \$lt_INSTALL liba.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install $lt_INSTALL liba.la $libdir" "cwrapper.at:228"
+( $at_check_trace; $LIBTOOL --mode=install $lt_INSTALL liba.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:228"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# build a new library version
+cat >a.c <<'_ATEOF'
+
+int liba_ver (void) { return 2; }
+_ATEOF
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:235: \$LIBTOOL --mode=compile --tag=CC \$CC \$CPPFLAGS \$CFLAGS -c a.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a.c" "cwrapper.at:235"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:235"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:237: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -version-info=0.0.0 -o liba.la -rpath \$libdir a.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -version-info=0.0.0 -o liba.la -rpath $libdir a.lo" "cwrapper.at:237"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -version-info=0.0.0 -o liba.la -rpath $libdir a.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:237"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+cd ..
+
+# build and run test application
+cat >m.c <<'_ATEOF'
+
+extern int liba_ver (void);
+int main (void)
+{
+  int r = (liba_ver () == 2) ? 0 : 1;
+  return r;
+}
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:252: \$CC \$CPPFLAGS \$CFLAGS -c m.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c m.c" "cwrapper.at:252"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c m.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:252"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:254: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m1\$EXEEXT m.\$OBJEXT foo/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m1$EXEEXT m.$OBJEXT foo/liba.la" "cwrapper.at:254"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m1$EXEEXT m.$OBJEXT foo/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:254"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./m1; if test -f "./m1$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:256: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "cwrapper.at:256"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:256"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:258: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m2\$EXEEXT m.\$OBJEXT foo/liba.la -L\$inst/lib"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m2$EXEEXT m.$OBJEXT foo/liba.la -L$inst/lib" "cwrapper.at:258"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m2$EXEEXT m.$OBJEXT foo/liba.la -L$inst/lib
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:258"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./m2; if test -f "./m2$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/cwrapper.at:260: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "cwrapper.at:260"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cwrapper.at:260"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_57
+#AT_START_58
+at_fn_group_banner 58 'deplib-in-subdir.at:34' \
+  "deplib in subdir" "                               " 3
+at_xfail=no
+(
+  $as_echo "58. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >a1.c <<'_ATEOF'
+int a1 () { return 0; }
+_ATEOF
+
+cat >a2.c <<'_ATEOF'
+int a2 () { return 0; }
+_ATEOF
+
+cat >a3.c <<'_ATEOF'
+int a3 () { return 0; }
+_ATEOF
+
+cat >b1.c <<'_ATEOF'
+extern int a1 ();
+int b1 () { return a1 (); }
+_ATEOF
+
+cat >b2.c <<'_ATEOF'
+extern int a2 ();
+int b2 () { return a2 (); }
+_ATEOF
+
+cat >b3.c <<'_ATEOF'
+extern int a3 ();
+int b3 () { return a3 (); }
+_ATEOF
+
+cat >m.c <<'_ATEOF'
+extern int b1 ();
+extern int b2 ();
+extern int b3 ();
+int main () { return b1 () + b2 () + b3 (); }
+_ATEOF
+
+
+cwd=`pwd`
+instdir=$cwd/inst
+lib1dir=$instdir/lib1
+lib2dir=$instdir/lib2
+bindir=$instdir/bin
+addrunpath=$cwd/foobar
+LDFLAGS="$LDFLAGS -no-undefined"
+
+flags='-export-symbols-regex ".*"'
+
+mkdir -p sub1 sub2/subsub sub3/subsub $instdir $lib1dir $lib2dir $bindir
+
+for file in a1.c a2.c a3.c b1.c b2.c b3.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+$CC $CPPFLAGS $CFLAGS -c m.c
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:81: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o sub1/liba1.la a1.lo -rpath \$lib1dir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub1/liba1.la a1.lo -rpath $lib1dir" "deplib-in-subdir.at:81"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub1/liba1.la a1.lo -rpath $lib1dir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:81"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:83: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o sub1/liba2.la a2.lo -rpath \$lib1dir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub1/liba2.la a2.lo -rpath $lib1dir" "deplib-in-subdir.at:83"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub1/liba2.la a2.lo -rpath $lib1dir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:83"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:85: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o sub1/liba3.la a3.lo -rpath \$lib1dir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub1/liba3.la a3.lo -rpath $lib1dir" "deplib-in-subdir.at:85"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub1/liba3.la a3.lo -rpath $lib1dir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:88: eval '\$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o sub2/subsub/libb1.la b1.lo 	 -rpath \$lib2dir sub1/liba1.la' \"\$flags\""
+at_fn_check_prepare_dynamic "eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub2/subsub/libb1.la b1.lo 	 -rpath $lib2dir sub1/liba1.la' \"$flags\"" "deplib-in-subdir.at:88"
+( $at_check_trace; eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub2/subsub/libb1.la b1.lo 	 -rpath $lib2dir sub1/liba1.la' "$flags"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:88"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd sub2
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:92: eval '\$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o subsub/libb2.la ../b2.lo 	 -rpath \$lib2dir ../sub1/liba2.la' \"\$flags\""
+at_fn_check_prepare_dynamic "eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o subsub/libb2.la ../b2.lo 	 -rpath $lib2dir ../sub1/liba2.la' \"$flags\"" "deplib-in-subdir.at:92"
+( $at_check_trace; eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o subsub/libb2.la ../b2.lo 	 -rpath $lib2dir ../sub1/liba2.la' "$flags"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:92"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd subsub
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:96: eval '\$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libb3.la ../../b3.lo 	 -rpath \$lib2dir ../../sub1/liba3.la' \"\$flags\""
+at_fn_check_prepare_dynamic "eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb3.la ../../b3.lo 	 -rpath $lib2dir ../../sub1/liba3.la' \"$flags\"" "deplib-in-subdir.at:96"
+( $at_check_trace; eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb3.la ../../b3.lo 	 -rpath $lib2dir ../../sub1/liba3.la' "$flags"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:96"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ../..
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:100: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o sub3/subsub/m1\$EXEEXT m.\$OBJEXT 	 sub2/subsub/libb1.la sub2/subsub/libb2.la sub2/subsub/libb3.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub3/subsub/m1$EXEEXT m.$OBJEXT 	 sub2/subsub/libb1.la sub2/subsub/libb2.la sub2/subsub/libb3.la" "deplib-in-subdir.at:100"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o sub3/subsub/m1$EXEEXT m.$OBJEXT 	 sub2/subsub/libb1.la sub2/subsub/libb2.la sub2/subsub/libb3.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:100"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd sub3
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:104: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o subsub/m2\$EXEEXT ../m.\$OBJEXT 	 ../sub2/subsub/libb1.la ../sub2/subsub/libb2.la ../sub2/subsub/libb3.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o subsub/m2$EXEEXT ../m.$OBJEXT 	 ../sub2/subsub/libb1.la ../sub2/subsub/libb2.la ../sub2/subsub/libb3.la" "deplib-in-subdir.at:104"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o subsub/m2$EXEEXT ../m.$OBJEXT 	 ../sub2/subsub/libb1.la ../sub2/subsub/libb2.la ../sub2/subsub/libb3.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:104"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd subsub
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:108: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m3\$EXEEXT ../../m.\$OBJEXT 	 ../../sub2/subsub/libb1.la ../../sub2/subsub/libb2.la ../../sub2/subsub/libb3.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m3$EXEEXT ../../m.$OBJEXT 	 ../../sub2/subsub/libb1.la ../../sub2/subsub/libb2.la ../../sub2/subsub/libb3.la" "deplib-in-subdir.at:108"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m3$EXEEXT ../../m.$OBJEXT 	 ../../sub2/subsub/libb1.la ../../sub2/subsub/libb2.la ../../sub2/subsub/libb3.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:108"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ../..
+
+for i in 1 2 3; do
+  lt_exe=./sub3/subsub/m$i; if test -f "./sub3/subsub/m$i$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:114: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "deplib-in-subdir.at:114"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  cd sub3
+  lt_exe=./subsub/m$i; if test -f "./subsub/m$i$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:116: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "deplib-in-subdir.at:116"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:116"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  cd subsub
+  lt_exe=./m$i; if test -f "./m$i$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:118: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "deplib-in-subdir.at:118"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:118"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  cd ../..
+done
+
+for i in 1 2 3; do
+  { set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:123: \$LIBTOOL --mode=install cp sub1/liba\$i.la \$lib1dir/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp sub1/liba$i.la $lib1dir/liba.la" "deplib-in-subdir.at:123"
+( $at_check_trace; $LIBTOOL --mode=install cp sub1/liba$i.la $lib1dir/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:123"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:126: \$LIBTOOL --mode=install cp sub2/subsub/libb1.la \$lib2dir/libb1.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp sub2/subsub/libb1.la $lib2dir/libb1.la" "deplib-in-subdir.at:126"
+( $at_check_trace; $LIBTOOL --mode=install cp sub2/subsub/libb1.la $lib2dir/libb1.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:126"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd sub2
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:128: \$LIBTOOL --mode=install cp subsub/libb2.la \$lib2dir/libb2.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp subsub/libb2.la $lib2dir/libb2.la" "deplib-in-subdir.at:128"
+( $at_check_trace; $LIBTOOL --mode=install cp subsub/libb2.la $lib2dir/libb2.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:128"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd subsub
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:130: \$LIBTOOL --mode=install cp libb3.la \$lib2dir/libb3.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp libb3.la $lib2dir/libb3.la" "deplib-in-subdir.at:130"
+( $at_check_trace; $LIBTOOL --mode=install cp libb3.la $lib2dir/libb3.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:130"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ../..
+
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:133: \$LIBTOOL --mode=install cp sub3/subsub/m1\$EXEEXT \$bindir/m1\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp sub3/subsub/m1$EXEEXT $bindir/m1$EXEEXT" "deplib-in-subdir.at:133"
+( $at_check_trace; $LIBTOOL --mode=install cp sub3/subsub/m1$EXEEXT $bindir/m1$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:133"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd sub3
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:135: \$LIBTOOL --mode=install cp subsub/m2\$EXEEXT \$bindir/m2\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp subsub/m2$EXEEXT $bindir/m2$EXEEXT" "deplib-in-subdir.at:135"
+( $at_check_trace; $LIBTOOL --mode=install cp subsub/m2$EXEEXT $bindir/m2$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:135"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd subsub
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:137: \$LIBTOOL --mode=install cp m3\$EXEEXT \$bindir/m3\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp m3$EXEEXT $bindir/m3$EXEEXT" "deplib-in-subdir.at:137"
+( $at_check_trace; $LIBTOOL --mode=install cp m3$EXEEXT $bindir/m3$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:137"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ../..
+
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:140: \$LIBTOOL --mode=clean rm -f sub1/liba1.la sub1/liba2.la sub1/liba3.la 	 sub2/subsub/libb1.la sub2/subsub/libb2.la sub2/subsub/libb3.la 	 sub3/subsub/m1\$EXEEXT sub3/subsub/m2\$EXEEXT sub3/subsub/m3\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f sub1/liba1.la sub1/liba2.la sub1/liba3.la 	 sub2/subsub/libb1.la sub2/subsub/libb2.la sub2/subsub/libb3.la 	 sub3/subsub/m1$EXEEXT sub3/subsub/m2$EXEEXT sub3/subsub/m3$EXEEXT" "deplib-in-subdir.at:140"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f sub1/liba1.la sub1/liba2.la sub1/liba3.la 	 sub2/subsub/libb1.la sub2/subsub/libb2.la sub2/subsub/libb3.la 	 sub3/subsub/m1$EXEEXT sub3/subsub/m2$EXEEXT sub3/subsub/m3$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:140"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for i in 1 2 3; do
+  lt_exe=$bindir/m$i$EXEEXT; if test -f "$bindir/m$i$EXEEXT$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:146: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "deplib-in-subdir.at:146"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:146"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  cd $bindir
+  lt_exe=./m$i$EXEEXT; if test -f "./m$i$EXEEXT$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:148: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "deplib-in-subdir.at:148"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:148"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  cd $cwd
+done
+
+PATH=$bindir${PATH_SEPARATOR-:}$PATH
+for i in 1 2 3; do
+  lt_exe=m$i$EXEEXT; if test -f "m$i$EXEEXT$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/deplib-in-subdir.at:154: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "deplib-in-subdir.at:154"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/deplib-in-subdir.at:154"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_58
+#AT_START_59
+at_fn_group_banner 59 'infer-tag.at:30' \
+  "inferred tag" "                                   " 3
+at_xfail=no
+(
+  $as_echo "59. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >a.c <<'_ATEOF'
+int a (void) { return 0; }
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:37: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c a.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c" "infer-tag.at:37"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:37"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_59
+#AT_START_60
+at_fn_group_banner 60 'infer-tag.at:42' \
+  "CXX inferred tag" "                               " 3
+at_xfail=no
+(
+  $as_echo "60. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:43: { test -n \"\$CXX\" && test \"X\$CXX\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$CXX\" && test \"X$CXX\" != Xno; } || (exit 77)" "infer-tag.at:43"
+( $at_check_trace; { test -n "$CXX" && test "X$CXX" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:43"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:43: test \"X\$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)"
+at_fn_check_prepare_dynamic "test \"X$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)" "infer-tag.at:43"
+( $at_check_trace; test "X$CXX" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:43"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+cat >a.cpp <<'_ATEOF'
+int a (void) { return 0; }
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:50: \$LIBTOOL --mode=compile \$CXX \$CPPFLAGS \$CXXFLAGS -c a.cpp"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CXX $CPPFLAGS $CXXFLAGS -c a.cpp" "infer-tag.at:50"
+( $at_check_trace; $LIBTOOL --mode=compile $CXX $CPPFLAGS $CXXFLAGS -c a.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:50"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_60
+#AT_START_61
+at_fn_group_banner 61 'infer-tag.at:55' \
+  "F77 inferred tag" "                               " 3
+at_xfail=no
+(
+  $as_echo "61. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:56: { test -n \"\$F77\" && test \"X\$F77\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$F77\" && test \"X$F77\" != Xno; } || (exit 77)" "infer-tag.at:56"
+( $at_check_trace; { test -n "$F77" && test "X$F77" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:56"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+cat >a.f <<'_ATEOF'
+      program main
+      end
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:64: \$LIBTOOL --mode=compile \$F77 \$FFLAGS -c a.f"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $F77 $FFLAGS -c a.f" "infer-tag.at:64"
+( $at_check_trace; $LIBTOOL --mode=compile $F77 $FFLAGS -c a.f
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:64"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_61
+#AT_START_62
+at_fn_group_banner 62 'infer-tag.at:69' \
+  "FC inferred tag" "                                " 3
+at_xfail=no
+(
+  $as_echo "62. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:70: { test -n \"\$FC\" && test \"X\$FC\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$FC\" && test \"X$FC\" != Xno; } || (exit 77)" "infer-tag.at:70"
+( $at_check_trace; { test -n "$FC" && test "X$FC" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:70"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+cat >a.f <<'_ATEOF'
+      program main
+      end
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:78: \$LIBTOOL --mode=compile \$FC \$FCFLAGS -c a.f"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $FC $FCFLAGS -c a.f" "infer-tag.at:78"
+( $at_check_trace; $LIBTOOL --mode=compile $FC $FCFLAGS -c a.f
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:78"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_62
+#AT_START_63
+at_fn_group_banner 63 'infer-tag.at:83' \
+  "GCJ inferred tag" "                               " 3
+at_xfail=no
+(
+  $as_echo "63. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:84: { test -n \"\$GCJ\" && test \"X\$GCJ\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$GCJ\" && test \"X$GCJ\" != Xno; } || (exit 77)" "infer-tag.at:84"
+( $at_check_trace; { test -n "$GCJ" && test "X$GCJ" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:84"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# There are just too many broken gcj installations out there, either missing
+   # libgcj.spec or unable to find it.  Skip the test for them.
+   cat >gcj_test.java <<'_ATEOF'
+public class gcj_test {
+    public static void main(String[] argv) { }
+  }
+_ATEOF
+
+   { set +x
+$as_echo "$at_srcdir/infer-tag.at:84: \$GCJ \$GCJFLAGS -c gcj_test.java || exit 77"
+at_fn_check_prepare_dynamic "$GCJ $GCJFLAGS -c gcj_test.java || exit 77" "infer-tag.at:84"
+( $at_check_trace; $GCJ $GCJFLAGS -c gcj_test.java || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:84"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+cat >A.java <<'_ATEOF'
+public class A {
+  private int a;
+  public A () { a = 0; }
+};
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/infer-tag.at:94: \$LIBTOOL --mode=compile \$GCJ \$GCJCFLAGS -c A.java"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $GCJ $GCJCFLAGS -c A.java" "infer-tag.at:94"
+( $at_check_trace; $LIBTOOL --mode=compile $GCJ $GCJCFLAGS -c A.java
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/infer-tag.at:94"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_63
+#AT_START_64
+at_fn_group_banner 64 'localization.at:24' \
+  "localized compiler messages" "                    " 3
+at_xfail=no
+(
+  $as_echo "64. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# Let's try German locale.  :-)
+
+
+cat >a.c <<'_ATEOF'
+int x[-1];
+_ATEOF
+
+cat >b.c <<'_ATEOF'
+int y;
+_ATEOF
+
+
+# First see if setting a locale is accepted at all.
+{ set +x
+$as_echo "$at_srcdir/localization.at:39: (LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE \$CC \$CPPFLAGS \$CFLAGS -c b.c) || exit 77"
+at_fn_check_prepare_dynamic "(LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE $CC $CPPFLAGS $CFLAGS -c b.c) || exit 77" "localization.at:39"
+( $at_check_trace; (LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE $CC $CPPFLAGS $CFLAGS -c b.c) || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/localization.at:39"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Find out about expected output.
+{ set +x
+$as_echo "$at_srcdir/localization.at:43: (LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE \$CC \$CPPFLAGS \$CFLAGS -c a.c) || exit 1"
+at_fn_check_prepare_dynamic "(LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE $CC $CPPFLAGS $CFLAGS -c a.c) || exit 1" "localization.at:43"
+( $at_check_trace; (LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE $CC $CPPFLAGS $CFLAGS -c a.c) || exit 1
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/localization.at:43"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+_ltbase=`$ECHO "$LIBTOOL" | sed 's,^.*/,,'`
+sed "/^distcc\[[0-9]*\]/d
+      /^$_ltbase: compile/d
+      s/\(tmp\/\{1,\}cc\)\([a-zA-Z0-9_]\{1,\}\)/\1-normalized-tmpname/g" < stdout > stdout.t
+case $host_os in
+  mingw*)
+    tr -d '\015' < stdout.t > expected-stdout ;;
+  *)
+    cp stdout.t expected-stdout ;;
+esac
+_ltbase=`$ECHO "$LIBTOOL" | sed 's,^.*/,,'`
+sed "/^distcc\[[0-9]*\]/d
+      /^$_ltbase: compile/d
+      s/\(tmp\/\{1,\}cc\)\([a-zA-Z0-9_]\{1,\}\)/\1-normalized-tmpname/g" < stderr > stderr.t
+case $host_os in
+  mingw*)
+    tr -d '\015' < stderr.t > expected-stderr ;;
+  *)
+    cp stderr.t expected-stderr ;;
+esac
+{ set +x
+$as_echo "$at_srcdir/localization.at:47: (LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE \$LIBTOOL --mode=compile --tag=CC \$CC \$CPPFLAGS \$CFLAGS -c a.c) || exit 1"
+at_fn_check_prepare_dynamic "(LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a.c) || exit 1" "localization.at:47"
+( $at_check_trace; (LANG=de_DE LANGUAGE=de_DE LC_ALL=de_DE $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c a.c) || exit 1
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/localization.at:47"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+_ltbase=`$ECHO "$LIBTOOL" | sed 's,^.*/,,'`
+sed "/^distcc\[[0-9]*\]/d
+      /^$_ltbase: compile/d
+      s/\(tmp\/\{1,\}cc\)\([a-zA-Z0-9_]\{1,\}\)/\1-normalized-tmpname/g" < stdout > stdout.t
+case $host_os in
+  mingw*)
+    tr -d '\015' < stdout.t > libtool-stdout ;;
+  *)
+    cp stdout.t libtool-stdout ;;
+esac
+_ltbase=`$ECHO "$LIBTOOL" | sed 's,^.*/,,'`
+sed "/^distcc\[[0-9]*\]/d
+      /^$_ltbase: compile/d
+      s/\(tmp\/\{1,\}cc\)\([a-zA-Z0-9_]\{1,\}\)/\1-normalized-tmpname/g" < stderr > stderr.t
+case $host_os in
+  mingw*)
+    tr -d '\015' < stderr.t > libtool-stderr ;;
+  *)
+    cp stderr.t libtool-stderr ;;
+esac
+# Avoid these errors:
+# GNU/Linux:
+#   /bin/sh: warning: setlocale: LC_ALL: cannot change locale (de_DE)
+# HP-UX:
+#   Warning! One or more of your selected locales are not available.
+#   Please invoke the commands "locale" and "locale -a" to verify your
+#   selections and the available locales.
+#
+#   Continuing processing using the "C" locale.
+{ set +x
+$as_echo "$at_srcdir/localization.at:60: grep locale stdout stderr && exit 77"
+at_fn_check_prepare_trace "localization.at:60"
+( $at_check_trace; grep locale stdout stderr && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/localization.at:60"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/localization.at:61: diff expected-stderr libtool-stderr"
+at_fn_check_prepare_trace "localization.at:61"
+( $at_check_trace; diff expected-stderr libtool-stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/localization.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/localization.at:62: diff expected-stdout libtool-stdout"
+at_fn_check_prepare_trace "localization.at:62"
+( $at_check_trace; diff expected-stdout libtool-stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/localization.at:62"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# check that we get our quoting right.
+
+{ set +x
+$as_echo "$at_srcdir/localization.at:67: (LANGUAGE='a; nosuchprogram \" '\\''  & \$x /#+*(){}|,:\`\\ !%' \$LIBTOOL --mode=compile --tag=CC \$CC \$CPPFLAGS \$CFLAGS -c b.c)"
+at_fn_check_prepare_notrace 'a `...` command substitution' "localization.at:67"
+( $at_check_trace; (LANGUAGE='a; nosuchprogram " '\''  & $x /#+*(){}|,:`\ !%' $LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c b.c)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/localization.at:67"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/localization.at:69: grep nosuchprogram stdout stderr"
+at_fn_check_prepare_trace "localization.at:69"
+( $at_check_trace; grep nosuchprogram stdout stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/localization.at:69"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_64
+#AT_START_65
+at_fn_group_banner 65 'nocase.at:26' \
+  "nocase library search" "                          " 3
+at_xfail=no
+(
+  $as_echo "65. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+eval `$LIBTOOL --config | $EGREP '^(want_nocaseglob|file_magic_glob)='`
+
+{ set +x
+$as_echo "$at_srcdir/nocase.at:31: test \"\$want_nocaseglob\" != yes &&          test -z \"\$file_magic_glob\" && exit 77"
+at_fn_check_prepare_dynamic "test \"$want_nocaseglob\" != yes &&          test -z \"$file_magic_glob\" && exit 77" "nocase.at:31"
+( $at_check_trace; test "$want_nocaseglob" != yes &&          test -z "$file_magic_glob" && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/nocase.at:31"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+mkdir foo
+cat >foo/Foo.c <<'_ATEOF'
+
+int Foo (void) { return 1; }
+_ATEOF
+
+
+mkdir bar
+cat >bar/bar.c <<'_ATEOF'
+
+extern int Foo (void);
+int bar (void) { return Foo (); }
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+
+extern int bar (void);
+int main (void) { return bar (); }
+_ATEOF
+
+
+libdir=`pwd`/inst/lib
+mkdir inst inst/bin inst/lib
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o foo/Foo.lo foo/Foo.c
+{ set +x
+$as_echo "$at_srcdir/nocase.at:58: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o foo/libFoo.la foo/Foo.lo 	 -no-undefined -version-info 1:0:0 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o foo/libFoo.la foo/Foo.lo 	 -no-undefined -version-info 1:0:0 -rpath $libdir" "nocase.at:58"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o foo/libFoo.la foo/Foo.lo 	 -no-undefined -version-info 1:0:0 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nocase.at:58"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/nocase.at:61: \$LIBTOOL --mode=install cp foo/libFoo.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp foo/libFoo.la $libdir" "nocase.at:61"
+( $at_check_trace; $LIBTOOL --mode=install cp foo/libFoo.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nocase.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/nocase.at:63: \$LIBTOOL --mode=clean rm -f foo/libFoo.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f foo/libFoo.la" "nocase.at:63"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f foo/libFoo.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nocase.at:63"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+rm -f $libdir/libFoo.la
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o bar/bar.lo bar/bar.c
+{ set +x
+$as_echo "$at_srcdir/nocase.at:69: \$LIBTOOL --mode=link --tag=CC \$CC \$CFLAGS \$LDFLAGS -o bar/libbar.la bar/bar.lo 	 -L\$libdir -lfoo -no-undefined -version-info 1:0:0 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o bar/libbar.la bar/bar.lo 	 -L$libdir -lfoo -no-undefined -version-info 1:0:0 -rpath $libdir" "nocase.at:69"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC $CFLAGS $LDFLAGS -o bar/libbar.la bar/bar.lo 	 -L$libdir -lfoo -no-undefined -version-info 1:0:0 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nocase.at:69"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/nocase.at:72: \$LIBTOOL --mode=install cp bar/libbar.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp bar/libbar.la $libdir" "nocase.at:72"
+( $at_check_trace; $LIBTOOL --mode=install cp bar/libbar.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nocase.at:72"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+str=`$EGREP '^(old_library)=' < $libdir/libbar.la`
+eval "$str"
+libbar=$old_library
+rm -f $libdir/$libbar
+
+$LIBTOOL --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS -c -o main.$OBJEXT main.c
+
+{ set +x
+$as_echo "$at_srcdir/nocase.at:82: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT -L\$libdir -lbar"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -L$libdir -lbar" "nocase.at:82"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -L$libdir -lbar
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nocase.at:82"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_65
+#AT_START_66
+at_fn_group_banner 66 'install.at:25' \
+  "Install tests" "                                  " 3
+at_xfail=no
+(
+  $as_echo "66. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# Ensure that install_override_mode overrides the mode of the shared
+# library (and only the shared library).
+
+{ set +x
+$as_echo "$at_srcdir/install.at:31: \$LIBTOOL --features | grep 'enable shared libraries' || exit 77"
+at_fn_check_prepare_notrace 'a shell pipeline' "install.at:31"
+( $at_check_trace; $LIBTOOL --features | grep 'enable shared libraries' || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/install.at:31"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+sed 's,^\(install_override_mode\)=.*,\1=755,' < $LIBTOOL > ./libtool
+LIBTOOL=./libtool
+chmod a+rx $LIBTOOL
+
+inst=`pwd`/inst
+mkdir inst
+
+echo 'int a () { return 0; }' > a.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+{ set +x
+$as_echo "$at_srcdir/install.at:42: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la a.lo 	 -rpath \$inst -no-undefined"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo 	 -rpath $inst -no-undefined" "install.at:42"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo 	 -rpath $inst -no-undefined
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/install.at:42"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/install.at:44: \$LIBTOOL --mode=install \$lt_INSTALL liba.la \$inst"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install $lt_INSTALL liba.la $inst" "install.at:44"
+( $at_check_trace; $LIBTOOL --mode=install $lt_INSTALL liba.la $inst
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/install.at:44"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/install.at:46: grep ' -m 755' stdout"
+at_fn_check_prepare_trace "install.at:46"
+( $at_check_trace; grep ' -m 755' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/install.at:46"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/install.at:47: \$LIBTOOL --mode=install \$lt_INSTALL -m 644 liba.la \$inst"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install $lt_INSTALL -m 644 liba.la $inst" "install.at:47"
+( $at_check_trace; $LIBTOOL --mode=install $lt_INSTALL -m 644 liba.la $inst
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/install.at:47"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/install.at:49: grep ' -m 755' stdout"
+at_fn_check_prepare_trace "install.at:49"
+( $at_check_trace; grep ' -m 755' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/install.at:49"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/install.at:50: grep ' -m 644.*liba.la' stdout"
+at_fn_check_prepare_trace "install.at:50"
+( $at_check_trace; grep ' -m 644.*liba.la' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/install.at:50"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_66
+#AT_START_67
+at_fn_group_banner 67 'versioning.at:24' \
+  "versioning" "                                     " 3
+at_xfail=no
+(
+  $as_echo "67. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+eval "`$LIBTOOL --config | $EGREP '^(objdir|host_os)='`"
+
+# Setup some library and program sources:
+# a library (a1), a new revision (a2), a compatible update (a3),
+# an incompatible update (a4).
+# Another library (libb) using liba, and a couple of programs,
+# using liba directly and indirectly through libb.
+
+cat >liba1.c <<'_ATEOF'
+
+int a (void)
+{
+  return 0;
+}
+_ATEOF
+
+
+cat >liba2.c <<'_ATEOF'
+
+/* The internal detail should be static.  It isn't static in this test,
+   so we can later find out that it's this revision of the library. */
+int internal_detail = 42;
+int a (void)
+{
+  return internal_detail - 42;
+}
+_ATEOF
+
+
+cat >liba3.c <<'_ATEOF'
+
+int a (void)
+{
+  return 0;
+}
+int aa (void)
+{
+  return 0;
+}
+_ATEOF
+
+
+cat >liba4.c <<'_ATEOF'
+
+int aa (void)
+{
+  return 0;
+}
+_ATEOF
+
+
+cat >libb.c <<'_ATEOF'
+
+extern int a (void);
+int b (void)
+{
+  return a ();
+}
+_ATEOF
+
+
+cat >prog1.c <<'_ATEOF'
+
+extern int a (void);
+int main (void)
+{
+  return a ();
+}
+_ATEOF
+
+
+cat >prog2.c <<'_ATEOF'
+
+extern int b (void);
+int main (void)
+{
+  return b ();
+}
+_ATEOF
+
+
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+LDFLAGS="$LDFLAGS -no-undefined"
+mkdir $inst $libdir $bindir
+
+for file in liba1.c liba2.c liba3.c liba4.c libb.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+for file in prog1.c prog2.c; do
+  $CC $CPPFLAGS $CFLAGS -c $file
+done
+
+# Setup is finished here.
+
+# Hypothesis: -version-info is ignored for convenience archives.
+{ set +x
+$as_echo "$at_srcdir/versioning.at:111: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la liba1.lo 	 -version-info 0:0:0"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	 -version-info 0:0:0" "versioning.at:111"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	 -version-info 0:0:0
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:111"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:113: grep 'version-info.*ignored for convenience' stderr"
+at_fn_check_prepare_trace "versioning.at:113"
+( $at_check_trace; grep 'version-info.*ignored for convenience' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:113"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Hypothesis: the deprecated -version-number works.
+# Be sure not to use zero here, it's not portable.
+for version_number in 1 1:1 2:1 1:1:1 3:2:1; do
+  { set +x
+$as_echo "$at_srcdir/versioning.at:118: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la liba1.lo 	   -version-number \$version_number -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	   -version-number $version_number -rpath $libdir" "versioning.at:118"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	   -version-number $version_number -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:118"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+# Hypothesis: -version-info can be passed kinds of values, esp. zero ones
+# and large ones.
+# TODO: check something like 1001:2419:189 after fixing issues
+# for `version_type's of `irix', `nonstopux', or `osf'.
+for version_info in 1 1:2 0:0:0 1:1:1 13:241:7; do
+  { set +x
+$as_echo "$at_srcdir/versioning.at:127: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la liba1.lo 	   -version-info \$version_info -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	   -version-info $version_info -rpath $libdir" "versioning.at:127"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	   -version-info $version_info -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:127"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+# Hypothesis: we diagnose when AGE is higher than CURRENT.
+{ set +x
+$as_echo "$at_srcdir/versioning.at:132: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la liba1.lo 	 -version-info 1:3:2 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	 -version-info 1:3:2 -rpath $libdir" "versioning.at:132"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	 -version-info 1:3:2 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/versioning.at:132"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:134: grep 'AGE.*is greater than' stderr"
+at_fn_check_prepare_trace "versioning.at:134"
+( $at_check_trace; grep 'AGE.*is greater than' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:134"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Hypothesis: we diagnose invalid values.
+for version_info in 1:2:3:4 -1 0:-1 0:0:-1; do
+  { set +x
+$as_echo "$at_srcdir/versioning.at:138: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la liba1.lo 	   -version-info \$version_info -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	   -version-info $version_info -rpath $libdir" "versioning.at:138"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	   -version-info $version_info -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/versioning.at:138"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+# Now, create an original version of the library and associated users.
+# This setup will be reused for further hypotheses below, and these
+# functions will be used to test working programs.
+
+test_uninstalled ()
+{
+  # temporarily move installed libraries out of the way in order to avoid
+  # skewing test results:
+  mv $libdir temp-lib
+  mv $bindir temp-bin
+  lt_exe=./prog1; if test -f "./prog1$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/versioning.at:153: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "versioning.at:153"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:153"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  lt_exe=./prog2; if test -f "./prog2$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/versioning.at:154: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "versioning.at:154"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:154"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  mv temp-lib $libdir
+  mv temp-bin $bindir
+}
+
+test_installed ()
+{
+  # temporarily move uninstalled libraries out of the way in order to avoid
+  # skewing test results:
+  mv $objdir temp
+  lt_exe=$bindir/prog1; if test -f "$bindir/prog1$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/versioning.at:164: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "versioning.at:164"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:164"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  lt_exe=$bindir/prog2; if test -f "$bindir/prog2$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/versioning.at:165: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "versioning.at:165"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:165"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  mv temp $objdir
+}
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:169: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la liba1.lo 	 -version-info 0:0:0 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	 -version-info 0:0:0 -rpath $libdir" "versioning.at:169"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo 	 -version-info 0:0:0 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:169"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:171: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libb.la libb.lo liba.la 	 -version-info 0:0:0 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la libb.lo liba.la 	 -version-info 0:0:0 -rpath $libdir" "versioning.at:171"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la libb.lo liba.la 	 -version-info 0:0:0 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:171"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:173: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o prog1\$EXEEXT prog1.\$OBJEXT 	 liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o prog1$EXEEXT prog1.$OBJEXT 	 liba.la" "versioning.at:173"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o prog1$EXEEXT prog1.$OBJEXT 	 liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:173"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:175: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o prog2\$EXEEXT prog2.\$OBJEXT 	 libb.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o prog2$EXEEXT prog2.$OBJEXT 	 libb.la" "versioning.at:175"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o prog2$EXEEXT prog2.$OBJEXT 	 libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:175"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+test_uninstalled
+{ set +x
+$as_echo "$at_srcdir/versioning.at:178: \$LIBTOOL --mode=install cp liba.la libb.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba.la libb.la $libdir" "versioning.at:178"
+( $at_check_trace; $LIBTOOL --mode=install cp liba.la libb.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:178"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:180: \$LIBTOOL --mode=install cp prog1\$EXEEXT prog2\$EXEEXT \$bindir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp prog1$EXEEXT prog2$EXEEXT $bindir" "versioning.at:180"
+( $at_check_trace; $LIBTOOL --mode=install cp prog1$EXEEXT prog2$EXEEXT $bindir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:180"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:182: \$LIBTOOL --mode=clean rm -f liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f liba.la" "versioning.at:182"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:182"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+test_installed
+{ set +x
+$as_echo "$at_srcdir/versioning.at:184: \$LIBTOOL --mode=uninstall rm -f \$libdir/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=uninstall rm -f $libdir/liba.la" "versioning.at:184"
+( $at_check_trace; $LIBTOOL --mode=uninstall rm -f $libdir/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:184"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# Hypothesis: library revision updates do not require (uninstalled
+# nor installed) programs or libraries to be relinked.
+{ set +x
+$as_echo "$at_srcdir/versioning.at:189: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la liba2.lo 	 -version-info 0:1:0 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba2.lo 	 -version-info 0:1:0 -rpath $libdir" "versioning.at:189"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba2.lo 	 -version-info 0:1:0 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:189"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+test_uninstalled
+{ set +x
+$as_echo "$at_srcdir/versioning.at:192: \$LIBTOOL --mode=install cp liba.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba.la $libdir" "versioning.at:192"
+( $at_check_trace; $LIBTOOL --mode=install cp liba.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:192"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:193: \$LIBTOOL --mode=clean rm -f liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f liba.la" "versioning.at:193"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:193"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+test_installed
+# do not uninstall here: the library may be reused in the next test.
+
+# Hypothesis: backward compatible library updates do not require
+# (uninstalled nor installed) programs or libraries to be relinked.
+# This can have one of several reasons:
+# - the soname is the difference between $current and $age, thus
+#   unchanged; in this case, the newly installed library will be used,
+# - the soname is only $current, or we are linking statically, in which case
+#   the old installed library code will be used,
+# - the numbers are not encoded at all, in which case the newly installed
+#   library will be used.
+{ set +x
+$as_echo "$at_srcdir/versioning.at:206: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la liba3.lo 	 -version-info 1:0:1 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba3.lo 	 -version-info 1:0:1 -rpath $libdir" "versioning.at:206"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba3.lo 	 -version-info 1:0:1 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:206"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# Do not test the uninstalled program, it may be broken (in the second case).
+{ set +x
+$as_echo "$at_srcdir/versioning.at:209: \$LIBTOOL --mode=install cp liba.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba.la $libdir" "versioning.at:209"
+( $at_check_trace; $LIBTOOL --mode=install cp liba.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:209"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:210: \$LIBTOOL --mode=clean rm -f liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f liba.la" "versioning.at:210"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:210"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+test_installed
+# do not uninstall here: the library may be reused in the next test.
+
+
+# Hypothesis: with shared libraries, incompatible library updates
+# will not cause old installed programs or libraries (linked against the old
+# library version) to break.
+# This can have one of several reasons:
+# - the soname has changed, so the old installed library will still be
+#   available,
+# - we are linking statically, so the old library code will still be used.
+# In order to be sure we are still linking against the old library version,
+# we must ensure that libb is not relinked, so we must not reinstall libb here.
+{ set +x
+$as_echo "$at_srcdir/versioning.at:224: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la liba4.lo 	 -version-info 2:0:0 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba4.lo 	 -version-info 2:0:0 -rpath $libdir" "versioning.at:224"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba4.lo 	 -version-info 2:0:0 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:224"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# We do not guarantee that old versions of an uninstalled library are still
+# available, so test_uninstalled will not necessarily work here any more.
+{ set +x
+$as_echo "$at_srcdir/versioning.at:228: \$LIBTOOL --mode=install cp liba.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba.la $libdir" "versioning.at:228"
+( $at_check_trace; $LIBTOOL --mode=install cp liba.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:228"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/versioning.at:229: \$LIBTOOL --mode=clean rm -f liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f liba.la" "versioning.at:229"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:229"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# This test does not work on AIX, not even with runtimelinking, because
+# the linker always records the unversioned name as dependency.
+{ set +x
+$as_echo "$at_srcdir/versioning.at:233: :; case \$host_os in aix*) exit 77;; esac"
+at_fn_check_prepare_dynamic ":; case $host_os in aix*) exit 77;; esac" "versioning.at:233"
+( $at_check_trace; :; case $host_os in aix*) exit 77;; esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/versioning.at:233"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+test_installed
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_67
+#AT_START_68
+at_fn_group_banner 68 'destdir.at:48' \
+  "Simple DESTDIR install" "                         " 4
+at_xfail=no
+      eval `$LIBTOOL --config | grep '^fast_install='`
+           case $fast_install in no) :;; *) false;; esac && at_xfail=yes
+(
+  $as_echo "68. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# A program that depends upon a library, both in the same package.
+# DESTDIR installs do not work with relink at install time.
+
+LDFLAGS="$LDFLAGS -no-undefined"
+if test -n "$we_are_on_a_safe_system"; then # let's read shorter cmdlines.
+  DESTDIR=/tmp/dest
+  prefix=/tmp/inst
+  rm -rf $DESTDIR $prefix
+else
+  DESTDIR=`pwd`/dest
+  prefix=`pwd`/inst
+fi
+libdir=$prefix/lib
+bindir=$prefix/bin
+$mkdir_p src $prefix $DESTDIR $DESTDIR$prefix
+eval `$LIBTOOL --config | $EGREP '^(FGREP|OBJDUMP)='`
+
+cd src
+echo 'int a() { return 0; }' > a.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir
+echo 'extern int a(); int main() { return a(); }' > m.c
+$CC $CPPFLAGS $CFLAGS -c m.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT m.$OBJEXT liba.la
+mkdir $DESTDIR$libdir $DESTDIR$bindir
+{ set +x
+$as_echo "$at_srcdir/destdir.at:61: \$LIBTOOL --mode=install cp liba.la \$DESTDIR\$libdir/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba.la $DESTDIR$libdir/liba.la" "destdir.at:61"
+( $at_check_trace; $LIBTOOL --mode=install cp liba.la $DESTDIR$libdir/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/destdir.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/destdir.at:63: \$LIBTOOL --mode=install cp m\$EXEEXT \$DESTDIR\$bindir/m\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp m$EXEEXT $DESTDIR$bindir/m$EXEEXT" "destdir.at:63"
+( $at_check_trace; $LIBTOOL --mode=install cp m$EXEEXT $DESTDIR$bindir/m$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/destdir.at:63"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$LIBTOOL --mode=clean rm -f liba.la m
+$mkdir_p "$libdir"
+(cd "$DESTDIR$libdir" && find . -type d) | (cd "$libdir" && xargs $mkdir_p)
+for file in `cd "$DESTDIR$libdir" && find . -type f -print -o -type l -print`
+do
+  mv "$DESTDIR$libdir"/$file "$libdir"/$file
+done
+rm -rf "$DESTDIR$libdir"
+
+$mkdir_p "$bindir"
+(cd "$DESTDIR$bindir" && find . -type d) | (cd "$bindir" && xargs $mkdir_p)
+for file in `cd "$DESTDIR$bindir" && find . -type f -print -o -type l -print`
+do
+  mv "$DESTDIR$bindir"/$file "$bindir"/$file
+done
+rm -rf "$DESTDIR$bindir"
+
+# We ignore failure on purpose here: we may not be root.
+{ set +x
+$as_echo "$at_srcdir/destdir.at:69: \$LIBTOOL --mode=finish \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=finish $libdir" "destdir.at:69"
+( $at_check_trace; $LIBTOOL --mode=finish $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/destdir.at:69"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=$bindir/m$EXEEXT; if test -f "$bindir/m$EXEEXT$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/destdir.at:70: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "destdir.at:70"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/destdir.at:70"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_68
+#AT_START_69
+at_fn_group_banner 69 'destdir.at:75' \
+  "DESTDIR with in-package deplibs" "                " 4
+at_xfail=no
+      eval `$LIBTOOL --config | grep '^fast_install='`
+           case $fast_install in no) :;; *) false;; esac && at_xfail=yes
+(
+  $as_echo "69. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# A program that depends upon a library that depends upon another
+# library, all in the same package.  Use two deplibs, one in $libdir
+# and one in another directory.
+# DESTDIR installs do not work with relink at install time.
+
+LDFLAGS="$LDFLAGS -no-undefined"
+if test -n "$we_are_on_a_safe_system"; then # let's read shorter cmdlines.
+  DESTDIR=/tmp/dest
+  prefix=/tmp/inst
+  rm -rf $DESTDIR $prefix
+else
+  DESTDIR=`pwd`/dest
+  prefix=`pwd`/inst
+fi
+libdir=$prefix/lib
+bindir=$prefix/bin
+$mkdir_p src $prefix $DESTDIR $DESTDIR$prefix
+eval `$LIBTOOL --config | $EGREP '^(FGREP|OBJDUMP)='`
+
+cd src
+echo 'int a1dep() { return 0; }' > a1dep.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a1dep.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba1dep.la a1dep.lo -rpath $libdir
+echo 'int a2dep() { return 0; }' > a2dep.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a2dep.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba2dep.la a2dep.lo -rpath ${libdir}2
+echo 'extern int a1dep(), a2dep(); int a() { return a1dep() + a2dep(); }' > a.c
+$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir liba1dep.la liba2dep.la
+echo 'extern int a(); int main() { return a(); }' > m.c
+$CC $CPPFLAGS $CFLAGS -c m.c
+$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT m.$OBJEXT liba.la
+mkdir $DESTDIR$libdir $DESTDIR${libdir}2 $DESTDIR$bindir
+{ set +x
+$as_echo "$at_srcdir/destdir.at:96: \$LIBTOOL --mode=install cp liba1dep.la \$DESTDIR\$libdir/liba1dep.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba1dep.la $DESTDIR$libdir/liba1dep.la" "destdir.at:96"
+( $at_check_trace; $LIBTOOL --mode=install cp liba1dep.la $DESTDIR$libdir/liba1dep.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/destdir.at:96"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/destdir.at:98: \$LIBTOOL --mode=install cp liba2dep.la \$DESTDIR\${libdir}2/liba2dep.la"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "destdir.at:98"
+( $at_check_trace; $LIBTOOL --mode=install cp liba2dep.la $DESTDIR${libdir}2/liba2dep.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/destdir.at:98"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/destdir.at:100: \$LIBTOOL --mode=install cp liba.la \$DESTDIR\$libdir/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba.la $DESTDIR$libdir/liba.la" "destdir.at:100"
+( $at_check_trace; $LIBTOOL --mode=install cp liba.la $DESTDIR$libdir/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/destdir.at:100"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/destdir.at:102: \$LIBTOOL --mode=install cp m\$EXEEXT \$DESTDIR\$bindir/m\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp m$EXEEXT $DESTDIR$bindir/m$EXEEXT" "destdir.at:102"
+( $at_check_trace; $LIBTOOL --mode=install cp m$EXEEXT $DESTDIR$bindir/m$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/destdir.at:102"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$LIBTOOL --mode=clean rm -f liba1dep.la liba2dep.la liba.la m
+$mkdir_p "$libdir"
+(cd "$DESTDIR$libdir" && find . -type d) | (cd "$libdir" && xargs $mkdir_p)
+for file in `cd "$DESTDIR$libdir" && find . -type f -print -o -type l -print`
+do
+  mv "$DESTDIR$libdir"/$file "$libdir"/$file
+done
+rm -rf "$DESTDIR$libdir"
+
+$mkdir_p "${libdir}2"
+(cd "$DESTDIR${libdir}2" && find . -type d) | (cd "${libdir}2" && xargs $mkdir_p)
+for file in `cd "$DESTDIR${libdir}2" && find . -type f -print -o -type l -print`
+do
+  mv "$DESTDIR${libdir}2"/$file "${libdir}2"/$file
+done
+rm -rf "$DESTDIR${libdir}2"
+
+$mkdir_p "$bindir"
+(cd "$DESTDIR$bindir" && find . -type d) | (cd "$bindir" && xargs $mkdir_p)
+for file in `cd "$DESTDIR$bindir" && find . -type f -print -o -type l -print`
+do
+  mv "$DESTDIR$bindir"/$file "$bindir"/$file
+done
+rm -rf "$DESTDIR$bindir"
+
+# We ignore failure on purpose here: we may not be root.
+{ set +x
+$as_echo "$at_srcdir/destdir.at:109: \$LIBTOOL --mode=finish \$libdir \${libdir}2"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "destdir.at:109"
+( $at_check_trace; $LIBTOOL --mode=finish $libdir ${libdir}2
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/destdir.at:109"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# put false libraries in the DESTDIR paths: if the installed program
+# refers to them, that is a bug.
+mkdir $DESTDIR$libdir $DESTDIR${libdir}2 $DESTDIR$bindir
+for lib in a1dep a2dep a; do
+  case $lib in
+  a2dep) ldir=${libdir}2;;
+  *)     ldir=$libdir;;
+  esac
+  echo "int this_should_not_be_linked_against () { return 0; }" > $lib.c
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $lib.c
+  # Note the rpath argument includes $DESTDIR: the installed false libs
+  # should be functional (i.e., not need `libtool --mode=finish').
+  $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o lib$lib.la $lib.lo -rpath $DESTDIR$ldir
+  $LIBTOOL --mode=install cp lib$lib.la $DESTDIR$ldir/lib$lib.la
+done
+
+lt_exe=$bindir/m$EXEEXT; if test -f "$bindir/m$EXEEXT$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/destdir.at:127: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "destdir.at:127"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/destdir.at:127"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# TODO: make this more portable:
+if test "$OBJDUMP" != false && ($OBJDUMP -p $bindir/m$EXEEXT) >/dev/null 2>&1; then
+  { set +x
+$as_echo "$at_srcdir/destdir.at:131: \$OBJDUMP -p \$bindir/m\$EXEEXT | \$EGREP -i \"R(UN)?PATH.*\$DESTDIR\""
+at_fn_check_prepare_notrace 'a shell pipeline' "destdir.at:131"
+( $at_check_trace; $OBJDUMP -p $bindir/m$EXEEXT | $EGREP -i "R(UN)?PATH.*$DESTDIR"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/destdir.at:131"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  . $libdir/liba.la
+  set x $library_names
+  lname=$2
+  if test -n "$lname"; then
+    { set +x
+$as_echo "$at_srcdir/destdir.at:136: \$OBJDUMP -p \$libdir/\$lname | \$EGREP -i \"R(UN)?PATH.*\$DESTDIR\""
+at_fn_check_prepare_notrace 'a shell pipeline' "destdir.at:136"
+( $at_check_trace; $OBJDUMP -p $libdir/$lname | $EGREP -i "R(UN)?PATH.*$DESTDIR"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/destdir.at:136"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  fi
+fi
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_69
+#AT_START_70
+at_fn_group_banner 70 'old-m4-iface.at:40' \
+  "AM_PROG_LIBTOOL" "                                " 5
+at_xfail=no
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "70. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.in <<'_ATEOF'
+AC_INIT(old.c)
+AM_PROG_LIBTOOL
+AC_SUBST([LIBTOOL_DEPS])
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >Makefile.in <<'_ATEOF'
+COMPILE = @CC@ @CPPFLAGS@ @CFLAGS@
+LINK      = @CC@ @CFLAGS@ @LDFLAGS@ -o $@
+SHELL     = @SHELL@
+LIBTOOL_DEPS = @LIBTOOL_DEPS@
+
+all: libtool old@EXEEXT@
+
+old@EXEEXT@: old.@OBJEXT@
+	$(LINK) old.@OBJEXT@
+
+.SUFFIXES:
+.SUFFIXES: .c .@OBJEXT@
+
+.c.@OBJEXT@:
+	$(COMPILE) -c $<
+
+libtool: $(LIBTOOL_DEPS)
+	$(SHELL) ./config.status --recheck
+_ATEOF
+
+
+
+cat >old.c <<'_ATEOF'
+#include <stdio.h>
+
+int main (void)
+{
+  printf ("Hello, World!");
+  return 0;
+}
+_ATEOF
+
+
+$LIBTOOLIZE --install
+
+
+
+# This is slightly bogus, since only libtool.m4 was required in aclocal.m4
+# with libtool-1.5x...
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:85: test -f aclocal.m4 ||
+  cat \"\$tst_aclocaldir/libtool.m4\" \"\$tst_aclocaldir/ltoptions.m4\" \\
+    \"\$tst_aclocaldir/ltsugar.m4\" \"\$tst_aclocaldir/ltversion.m4\" \\
+    \"\$tst_aclocaldir/lt~obsolete.m4\" > aclocal.m4"
+at_fn_check_prepare_notrace 'an embedded newline' "old-m4-iface.at:85"
+( $at_check_trace; test -f aclocal.m4 ||
+  cat "$tst_aclocaldir/libtool.m4" "$tst_aclocaldir/ltoptions.m4" \
+    "$tst_aclocaldir/ltsugar.m4" "$tst_aclocaldir/ltversion.m4" \
+    "$tst_aclocaldir/lt~obsolete.m4" > aclocal.m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:90: \$AUTOCONF --force"
+at_fn_check_prepare_dynamic "$AUTOCONF --force" "old-m4-iface.at:90"
+( $at_check_trace; $AUTOCONF --force
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:90: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "old-m4-iface.at:90"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/old-m4-iface.at:90: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "old-m4-iface.at:90"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+lt_exe=./old; if test -f "./old$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:92: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "old-m4-iface.at:92"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo >>"$at_stdout"; $as_echo "Hello, World!" | \
+  $at_diff - "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:92"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# Now, test that libtoolize doesn't mistakenly think the user called
+# any libtool macros if in fact she didn't.
+sed '/AM_PROG_LIBTOOL/d' configure.in >configure.int
+mv -f configure.int configure.in
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:98: \$LIBTOOLIZE -n"
+at_fn_check_prepare_dynamic "$LIBTOOLIZE -n" "old-m4-iface.at:98"
+( $at_check_trace; $LIBTOOLIZE -n
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:98"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# ensure no shell errors:
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:100: grep -v \"^libtoolize: \" stderr"
+at_fn_check_prepare_trace "old-m4-iface.at:100"
+( $at_check_trace; grep -v "^libtoolize: " stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/old-m4-iface.at:100"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:101: grep \"Remember to add.*LT_INIT.*to configure.in\" stdout"
+at_fn_check_prepare_trace "old-m4-iface.at:101"
+( $at_check_trace; grep "Remember to add.*LT_INIT.*to configure.in" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:101"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:102: grep \"Consider adding.*LT_WITH_LTDL\" stdout"
+at_fn_check_prepare_trace "old-m4-iface.at:102"
+( $at_check_trace; grep "Consider adding.*LT_WITH_LTDL" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/old-m4-iface.at:102"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:103: grep \"Remember to add.*LT_CONFIG_LTDL_DIR\" stdout"
+at_fn_check_prepare_trace "old-m4-iface.at:103"
+( $at_check_trace; grep "Remember to add.*LT_CONFIG_LTDL_DIR" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/old-m4-iface.at:103"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_70
+#AT_START_71
+at_fn_group_banner 71 'old-m4-iface.at:112' \
+  "AC_WITH_LTDL" "                                   " 5
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "71. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >module.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C"
+#endif
+const char *
+hello (void)
+{
+  return "Hello!";
+}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+#include <stdio.h>
+#include "ltdl.h"
+
+int
+main ()
+{
+  lt_dlhandle module;
+  const char *(*func) (void) = 0;
+  int status = 1;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during initialisation: %s\n", lt_dlerror());
+    return 1;
+  }
+
+  module = lt_dlopen("./module.la");
+  if (!module) {
+    fprintf (stderr, "error dlopening ./module.la: %s\n", lt_dlerror());
+    goto finish;
+  }
+
+  func = (const char *(*)(void)) lt_dlsym (module, "hello");
+  if (!func) {
+    fprintf (stderr, "error fetching func: %s\n", lt_dlerror());
+    goto finish;
+  }
+
+  printf ("%s\n", (*func) ());
+  status = 0;
+
+finish:
+  if (lt_dlexit() != 0) {
+    fprintf (stderr, "error during finalisation: %s\n", lt_dlerror());
+    status = 1;
+  }
+
+  return status;
+}
+_ATEOF
+
+
+
+
+
+
+
+cat >configure.in <<'_ATEOF'
+AC_PREREQ(2.50)
+AC_INIT([main.c])
+AC_PROG_MAKE_SET
+AC_LIBTOOL_DLOPEN
+AM_PROG_LIBTOOL
+AC_WITH_LTDL
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >Makefile.in <<'_ATEOF'
+top_srcdir	= .
+top_builddir	= .
+COMPILE		= @CC@ @INCLTDL@  @CPPFLAGS@ @CFLAGS@
+LTCOMPILE	= @LIBTOOL@ --mode=compile $(COMPILE)
+LTLINK		= @LIBTOOL@ --mode=link @CC@ -no-undefined @CFLAGS@ @LDFLAGS@ -o $@
+SHELL		= @SHELL@
+@SET_MAKE@
+
+TARGETS    = libltdl/libltdlc.la module.la ltdldemo@EXEEXT@
+
+all: $(TARGETS)
+
+libltdl/libltdlc.la:
+	cd libltdl && $(MAKE)
+
+module.la: module.lo
+	$(LTLINK) module.lo -module -avoid-version -rpath /dev/null
+
+ltdldemo@EXEEXT@: main.@OBJEXT@ module.la libltdl/libltdlc.la
+	$(LTLINK) main.@OBJEXT@ -dlopen module.la @LIBLTDL@ @LIBS@
+
+.SUFFIXES:
+.SUFFIXES: .c .@OBJEXT@ .lo
+
+.c.@OBJEXT@:
+	$(COMPILE) -c $<
+
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+_ATEOF
+
+
+# Be sure to use the in-tree libltdl, somebody might have removed
+# an installed libltdl.la file.
+$LIBTOOLIZE --ltdl --install
+
+
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:160: \$ACLOCAL -I libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I libltdl/m4" "old-m4-iface.at:160"
+( $at_check_trace; $ACLOCAL -I libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:160"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:160: \$AUTOCONF --force"
+at_fn_check_prepare_dynamic "$AUTOCONF --force" "old-m4-iface.at:160"
+( $at_check_trace; $AUTOCONF --force
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:160"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:160: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options --with-included-ltdl"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "old-m4-iface.at:160"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options --with-included-ltdl
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:160"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/old-m4-iface.at:160: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "old-m4-iface.at:160"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:160"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+lt_exe=./ltdldemo; if test -f "./ltdldemo$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/old-m4-iface.at:163: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "old-m4-iface.at:163"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/old-m4-iface.at:163"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_71
+#AT_START_72
+at_fn_group_banner 72 'am-subdir.at:33' \
+  "C subdir-objects" "                               " 6
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "72. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subdir-demo], 2.4.2, bug-libtool@gnu.org)
+AM_INIT_AUTOMAKE
+LT_INIT([win32-dll])
+AC_PROG_CC
+AM_PROG_CC_C_O
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = subdir-objects foreign 1.6
+AM_CPPFLAGS	= -I$(top_srcdir)/../..
+
+lib_LTLIBRARIES		= subdir/libsub.la
+subdir_libsub_la_SOURCES= subdir/sub.c
+
+bin_PROGRAMS		= subdir/subdemo
+subdir_subdemo_SOURCES	= subdir/main.c
+subdir_subdemo_LDADD	= subdir/libsub.la
+_ATEOF
+
+
+test -d subdir || { rm -f subdir && mkdir subdir; }
+
+cat >subdir/main.c <<'_ATEOF'
+#include <stdio.h>
+
+extern void sub (void);
+
+int main (void)
+{
+  printf ("Welcome to GNU Libtool subdir-objects test!\n");
+  sub();
+  return 0;
+}
+_ATEOF
+
+
+cat >subdir/sub.c <<'_ATEOF'
+#include <stdio.h>
+void sub (void) { printf ("** This is libsub **\n"); }
+_ATEOF
+
+
+$LIBTOOLIZE --copy
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:78: \$ACLOCAL -I m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I m4" "am-subdir.at:78"
+( $at_check_trace; $ACLOCAL -I m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:78"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:78: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "am-subdir.at:78"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:78"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/am-subdir.at:78: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "am-subdir.at:78"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/am-subdir.at:78"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:78: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "am-subdir.at:78"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:78"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:78: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "am-subdir.at:78"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:78"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/am-subdir.at:78: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "am-subdir.at:78"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:78"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+lt_exe=subdir/subdemo; if test -f "subdir/subdemo$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:80: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "am-subdir.at:80"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:80"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:81: grep 'Welcome to GNU Libtool subdir-objects test' stdout"
+at_fn_check_prepare_trace "am-subdir.at:81"
+( $at_check_trace; grep 'Welcome to GNU Libtool subdir-objects test' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:81"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:83: grep 'This is libsub' stdout"
+at_fn_check_prepare_trace "am-subdir.at:83"
+( $at_check_trace; grep 'This is libsub' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:83"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_72
+#AT_START_73
+at_fn_group_banner 73 'am-subdir.at:93' \
+  "C++ subdir-objects" "                             " 6
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "73. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:94: { test -n \"\$CXX\" && test \"X\$CXX\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$CXX\" && test \"X$CXX\" != Xno; } || (exit 77)" "am-subdir.at:94"
+( $at_check_trace; { test -n "$CXX" && test "X$CXX" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:94"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:94: test \"X\$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)"
+at_fn_check_prepare_dynamic "test \"X$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)" "am-subdir.at:94"
+( $at_check_trace; test "X$CXX" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:94"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subdir-demo], 2.4.2, bug-libtool@gnu.org)
+AM_INIT_AUTOMAKE
+AC_PROG_CC
+AM_PROG_CC_C_O
+AC_PROG_CXX
+AC_PROG_CXXCPP
+
+AC_LANG([C++])
+LT_INIT([win32-dll])
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = subdir-objects foreign 1.6
+AM_CPPFLAGS	= -I$(top_srcdir)/../..
+
+lib_LTLIBRARIES		= subdir/libsub.la
+subdir_libsub_la_SOURCES= subdir/sub.cxx subdir/sub.hxx
+
+bin_PROGRAMS		= subdir/subdemo
+subdir_subdemo_SOURCES	= subdir/main.cxx
+subdir_subdemo_LDADD	= subdir/libsub.la
+_ATEOF
+
+
+test -d subdir || { rm -f subdir && mkdir subdir; }
+
+cat >subdir/sub.hxx <<'_ATEOF'
+class libsub { public: int sub (void); };
+_ATEOF
+
+
+cat >subdir/main.cxx <<'_ATEOF'
+#include "sub.hxx"
+
+int main (void)
+{
+  libsub SUB;
+  return SUB.sub() != 27;
+}
+_ATEOF
+
+
+cat >subdir/sub.cxx <<'_ATEOF'
+#include "sub.hxx"
+
+int libsub::sub (void) { return 27; }
+_ATEOF
+
+
+$LIBTOOLIZE --copy
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:146: \$ACLOCAL -I m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I m4" "am-subdir.at:146"
+( $at_check_trace; $ACLOCAL -I m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:146"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:146: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "am-subdir.at:146"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:146"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/am-subdir.at:146: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "am-subdir.at:146"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/am-subdir.at:146"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:146: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "am-subdir.at:146"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:146"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:146: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "am-subdir.at:146"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:146"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/am-subdir.at:146: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "am-subdir.at:146"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:146"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+lt_exe=subdir/subdemo; if test -f "subdir/subdemo$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/am-subdir.at:148: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "am-subdir.at:148"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/am-subdir.at:148"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_73
+#AT_START_74
+at_fn_group_banner 74 'lt_dlexit.at:30' \
+  "lt_dlexit unloading libs" "                       " 7
+at_xfail=no
+(
+  $as_echo "74. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# Test for
+# http://lists.gnu.org/archive/html/bug-libtool/2007-01/msg00014.html
+# http://lists.gnu.org/archive/html/bug-libtool/2008-03/msg00013.html
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+#include <string.h>
+
+typedef int (*pfun_T) (int);
+typedef int *pvar_T;
+
+/* lt_dlopen wrapper */
+static lt_dlhandle
+xdlopen (const char *filename)
+{
+  lt_dlhandle handle = lt_dlopen (filename);
+  if (!handle) {
+    fprintf (stderr, "can't open the module %s!\n", filename);
+    fprintf (stderr, "error was: %s\n", lt_dlerror());
+  }
+  return handle;
+}
+
+/* lt_dlsym wrapper: try one function and one variable */
+static int
+xdlsymtest (lt_dlhandle handle, const char *func, const char *var)
+{
+  pfun_T pf = (pfun_T) lt_dlsym (handle, func);
+  pvar_T pv = (pvar_T) lt_dlsym (handle, var);
+  if (pf == NULL) {
+    fprintf (stderr, "function `%s' not found\n", func);
+    return 1;
+  }
+  if (pv == NULL) {
+    fprintf (stderr, "variable `%s' not found\n", var);
+    return 1;
+  }
+  return (*pf) (*pv);
+}
+
+int
+main (void)
+{
+  lt_dlhandle b1;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during initialization: %s\n", lt_dlerror());
+    return 1;
+  }
+  if (lt_dlexit() != 0) {
+    fprintf (stderr, "error during first lt_dlexit: %s\n", lt_dlerror());
+    return 1;
+  }
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during second initialization: %s\n", lt_dlerror());
+    return 1;
+  }
+  if (!(b1 = xdlopen ("modb1.la"))) return 1;
+  if (xdlsymtest (b1, "fb1", "vb1")) return 1;
+  /* do not lt_dlclose here on purpose.  */
+
+  if (lt_dlexit() != 0) {
+    fprintf (stderr, "error during exit: %s\n", lt_dlerror());
+    return 1;
+  }
+  return 0;
+}
+_ATEOF
+
+
+
+cat >a1.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f1 (int x) { return x - 1; }
+int v1 = 1;
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >b1.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+#if defined DLL_EXPORT && defined _WIN32 && defined _MSC_VER
+#  define LIBA1_SCOPE extern __declspec (dllimport)
+#endif
+#if !defined LIBA1_SCOPE
+#  define LIBA1_SCOPE extern
+#endif
+LIBA1_SCOPE int f1 (int);
+LIBA1_SCOPE int v1;
+int fb1 (int x) { return f1 (v1) + x - 3; }
+int vb1 = 3;
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/lt_dlexit.at:141: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "lt_dlexit.at:141"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlexit.at:141"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+
+for file in a1 b1; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file.c
+done
+$CC $CPPFLAGS $CFLAGS -c main.c
+{ set +x
+$as_echo "$at_srcdir/lt_dlexit.at:152: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba1.la a1.lo \\
+          -rpath /foo -avoid-version"
+at_fn_check_prepare_notrace 'an embedded newline' "lt_dlexit.at:152"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba1.la a1.lo \
+          -rpath /foo -avoid-version
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlexit.at:152"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlexit.at:154: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o modb1.la b1.lo \\
+          -rpath /foo -module -avoid-version liba1.la"
+at_fn_check_prepare_notrace 'an embedded newline' "lt_dlexit.at:154"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o modb1.la b1.lo \
+          -rpath /foo -module -avoid-version liba1.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlexit.at:154"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# TODO: test -dlpreopen
+for dlopen in -dlopen; do
+  { set +x
+$as_echo "$at_srcdir/lt_dlexit.at:159: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT \\
+           \$dlopen modb1.la \$LIBLTDL"
+at_fn_check_prepare_notrace 'an embedded newline' "lt_dlexit.at:159"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT \
+           $dlopen modb1.la $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlexit.at:159"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/lt_dlexit.at:161: if \$LIBTOOL --mode=execute -dlopen modb1.la \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=execute -dlopen modb1.la \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "lt_dlexit.at:161"
+( $at_check_trace; if $LIBTOOL --mode=execute -dlopen modb1.la "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlexit.at:161"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_74
+#AT_START_75
+at_fn_group_banner 75 'lt_dladvise.at:28' \
+  "lt_dlopenadvise library loading" "                " 7
+at_xfail=no
+(
+  $as_echo "75. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+
+typedef int funcp (int);
+
+static int errors = 0;
+
+static void
+complain (const char *msg)
+{
+  const char *errmsg = lt_dlerror ();
+  fprintf (stderr, "%s", msg);
+  if (errmsg)
+    fprintf (stderr, ": %s\n", errmsg);
+  else
+    fprintf (stderr, ".\n");
+  ++errors;
+}
+
+static lt_dlhandle
+moduleopen (const char *filename, lt_dladvise advise)
+{
+  lt_dlhandle handle;
+
+  handle = lt_dlopenadvise (filename, advise);
+  if (!handle)
+    {
+      fprintf (stderr, "can't open the module %s!\n", filename);
+      complain ("error was");
+    }
+
+  return handle;
+}
+
+static int
+moduletest (lt_dlhandle handle, const char *fname, const char *vname)
+{
+  funcp *f = (funcp *) lt_dlsym (handle, fname);
+  int   *v = (int *)   lt_dlsym (handle, vname);
+
+  if (!f)
+    {
+      fprintf (stderr, "function `%s' not found\n", fname);
+      ++errors;
+      return -1;
+    }
+  if (!v)
+    {
+      fprintf (stderr, "variable `%s' not found\n", vname);
+      ++errors;
+      return -1;
+    }
+  return f (*v);
+}
+
+void
+hint_ext (void)
+{
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_ext (&advise))
+    complain ("error setting advise ext");
+
+  handle = moduleopen ("libdepend", advise);
+
+  if (handle)
+    printf ("depend: %d\n", moduletest (handle, "g", "j"));
+
+  lt_dladvise_destroy (&advise);
+}
+
+void
+hint_resident (void)
+{
+  const lt_dlinfo *info;
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_resident (&advise))
+    complain ("error setting advise resident");
+
+  handle = moduleopen ("libresident.la", advise);
+
+  if (handle)
+    {
+      info = lt_dlgetinfo (handle);
+      if (!info->is_resident)
+	complain ("error taking advise resident");
+
+      /* cannot close resident modules */
+      if (lt_dlclose (handle) == 0)
+	complain ("successfully unloaded resident module");
+
+      printf ("resident: %d\n", moduletest (handle, "func", "numb"));
+    }
+
+  lt_dladvise_destroy (&advise);
+}
+
+void
+hint_local (void)
+{
+  const lt_dlinfo *info;
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_local (&advise))
+    complain ("error setting advise local");
+
+  handle = moduleopen ("liblocal.la", advise);
+
+  if (handle)
+    {
+      info = lt_dlgetinfo (handle);
+      printf ("local: %d\n", moduletest (handle, "f", "i"));
+
+      /* If the symlocal hint was taken, don't unload this module
+         and test that our local symbolnames won't clash with modglobal.  */
+      if (!info->is_symlocal && lt_dlclose (handle))
+	complain ("error unloading modlocal");
+    }
+
+  lt_dladvise_destroy (&advise);
+}
+
+void
+hint_global (void)
+{
+  const lt_dlinfo *info;
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_global (&advise))
+    complain ("error setting advise global");
+
+  handle = moduleopen ("libglobal.la", advise);
+
+  if (handle)
+    {
+      info = lt_dlgetinfo (handle);
+      printf ("global: %d\n", moduletest (handle, "f", "i"));
+
+      /* Don't attempt to load moddepend unless modglobal was successfully
+         loaded and the symglobal hint was taken, and the system allows to
+ 	 to have undefined symbols.  */
+      if (info && info->is_symglobal && HAVE_UNDEFINED_SYMBOLS)
+        {
+          hint_ext ();
+        }
+      else
+        {
+          /* Fake the output so the test won't fail when using a dlloader
+             unable to take symglobal hints.  */
+          printf ("depend: 5\n");
+        }
+    }
+
+  lt_dladvise_destroy (&advise);
+}
+
+void
+hint_preload (void)
+{
+  lt_dlhandle handle;
+  lt_dladvise advise;
+
+  if (lt_dladvise_init (&advise) || lt_dladvise_preload (&advise))
+    complain ("error setting advise preload");
+
+  handle = moduleopen ("libpreload.la", advise);
+
+  if (handle)
+    {
+      printf("preload: %d\n", moduletest (handle, "h", "k"));
+    }
+
+  lt_dladvise_destroy (&advise);
+}
+
+int
+main (void)
+{
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (lt_dlinit() != 0)
+    {
+      fprintf (stderr, "error during initialization: %s\n", lt_dlerror());
+      return 1;
+    }
+
+  hint_resident ();
+  hint_local ();
+#ifdef HAVE_SHARED
+  hint_global ();
+#else
+  /* This ugly hack is because we have symbols with the same name in both the
+     global module and the local one, we can't lt_dlopen the local module
+     locally and then later load the global module globally because of this.
+     Instead of skipping the test entirely, we test what we can and
+     have this hack. */
+  printf ("global: 4\n");
+  printf ("depend: 5\n");
+#endif
+  hint_preload ();
+
+  if (lt_dlexit () != 0)
+    complain ("error during exit");
+
+  return (errors != 0);
+}
+_ATEOF
+
+
+cat >modresident.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+int func (int x) { return x / 3; }
+int numb = 7;
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >modlocal.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f (int x) { return (x * x) / 10; }
+int i = 6;
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >modglobal.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f (int x) { return x - 1; }
+int i = 5;
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >moddepend.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+extern int f (int), i;
+int g (int x) { return f (i) + x - 3; }
+int j = 4;
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >modpreload.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+int h (int x) { return 2 * x; }
+int k = 3;
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+resident: 2
+local: 3
+global: 4
+depend: 5
+preload: 6
+_ATEOF
+
+case $host_os in mingw*)
+  while read -r l; do printf "%s\r\n" "$l"; done < expout > expout.t
+  mv -f expout.t expout ;;
+esac
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/lt_dladvise.at:315: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "lt_dladvise.at:315"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dladvise.at:315"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+
+dlopenable='resident local global'
+dlpreloadable='preload'
+
+# ------------------------------------------------------------------------- #
+# The depend test makes no sense unless compiled without -no-undefined. By  #
+# not building the depend module in that case, when this test passes we can #
+# be sure that hint_global() above, is being correctly informed those hosts #
+# are reporting not able to accept the global hint to lt_dlopenadvise().    #
+# ------------------------------------------------------------------------- #
+
+have_shared=false
+$LIBTOOL --features | grep 'enable shared libraries' >/dev/null && have_shared=:
+
+case $host_os,$have_shared in
+cygwin* | mingw* | cegcc* | *,false)
+  # These hosts do not support linking without -no-undefined
+  CPPFLAGS="$CPPFLAGS -DHAVE_UNDEFINED_SYMBOLS=0"
+  ;;
+*)
+  CPPFLAGS="$CPPFLAGS -DHAVE_UNDEFINED_SYMBOLS=1"
+  dlopenable="$dlopen depend"
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c moddepend.c
+  { set +x
+$as_echo "$at_srcdir/lt_dladvise.at:343: \$LIBTOOL --mode=link \$CC -module \$CFLAGS \$LDFLAGS -o libdepend.la            moddepend.lo -rpath /foo -avoid-version"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC -module $CFLAGS $LDFLAGS -o libdepend.la            moddepend.lo -rpath /foo -avoid-version" "lt_dladvise.at:343"
+( $at_check_trace; $LIBTOOL --mode=link $CC -module $CFLAGS $LDFLAGS -o libdepend.la            moddepend.lo -rpath /foo -avoid-version
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dladvise.at:343"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  ;;
+esac
+
+$have_shared && CPPFLAGS="$CPPFLAGS -DHAVE_SHARED"
+
+# ------------------------------------------------------------------------- #
+# Other modules can be tested correctly even when built with -no-undefined. #
+# ------------------------------------------------------------------------- #
+
+LDFLAGS="$LDFLAGS -no-undefined"
+
+$CC $CPPFLAGS $CFLAGS -c main.c
+for name in resident local global preload; do
+  # FIXME: adding -static to libpreload shouldn't be necessary.
+  #        Fix this properly in ltmain, then remove this workaround.
+  if test $name = preload; then
+    st=-static
+  else
+    st=
+  fi
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c mod$name.c
+  { set +x
+$as_echo "$at_srcdir/lt_dladvise.at:366: \$LIBTOOL --mode=link \$CC -module \$CFLAGS \$LDFLAGS -o lib\$name.la            mod\$name.lo \$st -rpath /foo -avoid-version"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC -module $CFLAGS $LDFLAGS -o lib$name.la            mod$name.lo $st -rpath /foo -avoid-version" "lt_dladvise.at:366"
+( $at_check_trace; $LIBTOOL --mode=link $CC -module $CFLAGS $LDFLAGS -o lib$name.la            mod$name.lo $st -rpath /foo -avoid-version
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dladvise.at:366"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+preloaded=
+for module in $dlpreloadable; do
+  preloaded="${preloaded+$preloaded }-dlpreopen lib$module.la"
+done
+
+modules=
+for module in $dlopenable; do
+  modules="${modules+$modules }-dlopen lib$module.la"
+done
+
+{ set +x
+$as_echo "$at_srcdir/lt_dladvise.at:380: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT \$preloaded \$modules \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT $preloaded $modules $LIBLTDL" "lt_dladvise.at:380"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT $preloaded $modules $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dladvise.at:380"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Remove loadable libpreload module, so we know it is the preloaded module
+# that is being executed by a successful test invocation:
+{ set +x
+$as_echo "$at_srcdir/lt_dladvise.at:385: \$LIBTOOL --mode=clean rm -f libpreload.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f libpreload.la" "lt_dladvise.at:385"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f libpreload.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dladvise.at:385"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/lt_dladvise.at:387: if \$LIBTOOL --mode=execute \$modules \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=execute $modules \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "lt_dladvise.at:387"
+( $at_check_trace; if $LIBTOOL --mode=execute $modules "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dladvise.at:387"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_75
+#AT_START_76
+at_fn_group_banner 76 'lt_dlopen.at:23' \
+  "lt_dlopen error messages" "                       " 7
+at_xfail=yes
+(
+  $as_echo "76. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# The bug is not fixed:
+
+
+# This test only works if the system allows undefined symbols.
+eval `$LIBTOOL --config | grep '^allow_undefined_flag='`
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen.at:31: test unsupported != \"\$allow_undefined_flag\" || exit 77"
+at_fn_check_prepare_dynamic "test unsupported != \"$allow_undefined_flag\" || exit 77" "lt_dlopen.at:31"
+( $at_check_trace; test unsupported != "$allow_undefined_flag" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen.at:31"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle plugin_handle;
+
+  if (argc < 2)
+    {
+      fprintf (stderr, "usage: %s plugin\n", argv[0]);
+      return 1;
+    }
+
+  lt_dlinit ();
+  plugin_handle = lt_dlopenext (argv[1]);
+  if (NULL != plugin_handle)
+    {
+      printf ("plugin opened successfully!\n");
+      lt_dlclose (plugin_handle);
+    }
+  else
+    {
+      printf ("plugin failed to open: %s\n", lt_dlerror());
+      err = 1;
+    }
+  lt_dlexit ();
+  return err;
+}
+_ATEOF
+
+
+cat >good-plugin.c <<'_ATEOF'
+int foo;
+int *i = &foo;
+_ATEOF
+
+
+cat >missing-symbol-plugin.c <<'_ATEOF'
+/* On systems that allow undefined symbols, this will compile,
+     but the symbol "foo" won't be found at runtime */
+extern int foo;
+int *i = &foo;
+_ATEOF
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+inst=`pwd`/inst
+libdir=$inst/lib
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen.at:85: \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c main.c" "lt_dlopen.at:85"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+for file in good-plugin.c missing-symbol-plugin.c; do
+  { set +x
+$as_echo "$at_srcdir/lt_dlopen.at:87: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c \$file"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file" "lt_dlopen.at:87"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen.at:90: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o good-plugin.la -rpath \$libdir 	 -module -avoid-version good-plugin.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o good-plugin.la -rpath $libdir 	 -module -avoid-version good-plugin.lo" "lt_dlopen.at:90"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o good-plugin.la -rpath $libdir 	 -module -avoid-version good-plugin.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen.at:92: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o missing-symbol-plugin.la -rpath \$libdir	 -module -avoid-version missing-symbol-plugin.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o missing-symbol-plugin.la -rpath $libdir	 -module -avoid-version missing-symbol-plugin.lo" "lt_dlopen.at:92"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o missing-symbol-plugin.la -rpath $libdir	 -module -avoid-version missing-symbol-plugin.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen.at:92"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen.at:95: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT 	 -dlopen good-plugin.la -dlopen missing-symbol-plugin.la \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT 	 -dlopen good-plugin.la -dlopen missing-symbol-plugin.la $LIBLTDL" "lt_dlopen.at:95"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT 	 -dlopen good-plugin.la -dlopen missing-symbol-plugin.la $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen.at:99: if \"\$lt_exe\" ./good-plugin.la; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ./good-plugin.la; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "lt_dlopen.at:99"
+( $at_check_trace; if "$lt_exe" ./good-plugin.la; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen.at:99"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen.at:100: if \"\$lt_exe\" ./missing-symbol-plugin.la; then :; else lt_status=\$?; 	   test \$lt_status != 1 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ./missing-symbol-plugin.la; then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "lt_dlopen.at:100"
+( $at_check_trace; if "$lt_exe" ./missing-symbol-plugin.la; then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/lt_dlopen.at:100"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen.at:101: grep 'missing symbol' stderr"
+at_fn_check_prepare_trace "lt_dlopen.at:101"
+( $at_check_trace; grep 'missing symbol' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen.at:101"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_76
+#AT_START_77
+at_fn_group_banner 77 'lt_dlopen_a.at:23' \
+  "lt_dlopen archive" "                              " 7
+at_xfail=no
+(
+  $as_echo "77. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+
+/* This dlopen() in the main executable should override any dlopen()s in
+   shared libraries etc.
+
+   If that is not the case (or the platform does not use dlopen()) then this
+   test should exit 77, causing the test to SKIP.
+*/
+static int retcde = 77;
+
+void * dlopen(const char *path, int mode) {
+  if (!(strcmp(path,"plugin.a") && strcmp(path,"plugin.lib")))
+    {
+      fprintf(stderr,"Tried to open archive %s\n",path);
+      retcde = 1;
+    }
+  else
+    {
+      fprintf(stderr,"Opening ... %s\n", path);
+      if (retcde == 77) retcde = 0;
+    }
+  return NULL;
+}
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle plugin_handle;
+
+  lt_dlinit ();
+  plugin_handle = lt_dlopenext (argv[1]);
+  lt_dlexit ();
+  return retcde;
+}
+_ATEOF
+
+
+cat >plugin.c <<'_ATEOF'
+
+int i = 1;
+_ATEOF
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen_a.at:78: \$CC \$CPPFLAGS \$CFLAGS -c main.c || exit 77"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c main.c || exit 77" "lt_dlopen_a.at:78"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c main.c || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen_a.at:78"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen_a.at:79: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c plugin.c || exit 77"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c plugin.c || exit 77" "lt_dlopen_a.at:79"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c plugin.c || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen_a.at:79"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen_a.at:81: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o plugin.la -rpath 	 \$libdir -module -no-undefined -avoid-version plugin.lo || exit 77"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o plugin.la -rpath 	 $libdir -module -no-undefined -avoid-version plugin.lo || exit 77" "lt_dlopen_a.at:81"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o plugin.la -rpath 	 $libdir -module -no-undefined -avoid-version plugin.lo || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen_a.at:81"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen_a.at:85: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT 	 main.\$OBJEXT -dlopen plugin.la \$LIBLTDL || exit 77"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT 	 main.$OBJEXT -dlopen plugin.la $LIBLTDL || exit 77" "lt_dlopen_a.at:85"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT 	 main.$OBJEXT -dlopen plugin.la $LIBLTDL || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen_a.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+mkdir -p $libdir
+mkdir -p $bindir
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen_a.at:92: \$LIBTOOL --mode=install cp plugin.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp plugin.la $libdir" "lt_dlopen_a.at:92"
+( $at_check_trace; $LIBTOOL --mode=install cp plugin.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen_a.at:92"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen_a.at:93: \$LIBTOOL --mode=install cp main\$EXEEXT \$bindir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp main$EXEEXT $bindir" "lt_dlopen_a.at:93"
+( $at_check_trace; $LIBTOOL --mode=install cp main$EXEEXT $bindir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen_a.at:93"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen_a.at:94: test -f \$libdir/plugin.a || exit 77"
+at_fn_check_prepare_dynamic "test -f $libdir/plugin.a || exit 77" "lt_dlopen_a.at:94"
+( $at_check_trace; test -f $libdir/plugin.a || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen_a.at:94"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=$bindir/main; if test -f "$bindir/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/lt_dlopen_a.at:95: if \"\$lt_exe\" \$libdir/plugin.la; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" $libdir/plugin.la; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "lt_dlopen_a.at:95"
+( $at_check_trace; if "$lt_exe" $libdir/plugin.la; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopen_a.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_77
+#AT_START_78
+at_fn_group_banner 78 'lt_dlopenext.at:23' \
+  "lt_dlopenext error messages" "                    " 7
+at_xfail=no
+(
+  $as_echo "78. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# This test requires shared library support.
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:27: \$LIBTOOL --features | grep 'enable shared libraries' || exit 77"
+at_fn_check_prepare_notrace 'a shell pipeline' "lt_dlopenext.at:27"
+( $at_check_trace; $LIBTOOL --features | grep 'enable shared libraries' || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:27"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+prefix=`pwd`/inst
+libdir=$prefix/lib
+bindir=$prefix/bin
+mkdir $prefix $libdir $bindir
+
+# This code is copied from the Autobook:
+# <http://sources.redhat.com/autobook/autobook/autobook_169.html>
+# so if it needs changes, be sure to notify the Autobook authors
+# about them.
+
+cat >simple-module.c <<'_ATEOF'
+
+#include <stdio.h>
+
+#ifdef __cplusplus
+extern "C"
+#endif
+int
+run (const char *argument)
+{
+  printf ("Hello, %s!\n", argument);
+  return 0;
+}
+_ATEOF
+
+
+cat >ltdl-loader.c <<'_ATEOF'
+
+#include <stdio.h>
+#include <stdlib.h>
+#ifndef EXIT_FAILURE
+#  define EXIT_FAILURE        1
+#  define EXIT_SUCCESS        0
+#endif
+
+#include <limits.h>
+#ifndef PATH_MAX
+#  define PATH_MAX 255
+#endif
+
+#include <string.h>
+#include <ltdl.h>
+
+#ifndef MODULE_PATH_ENV
+#  define MODULE_PATH_ENV        "MODULE_PATH"
+#endif
+
+typedef int entrypoint (const char *argument);
+
+/* Save and return a copy of the dlerror() error  message,
+   since the next API call may overwrite the original. */
+static char *dlerrordup (char *errormsg);
+
+int
+main (int argc, const char *argv[])
+{
+  char *errormsg = NULL;
+  lt_dlhandle module = NULL;
+  entrypoint *run = NULL;
+  int errors = 0;
+
+  if (argc != 3)
+    {
+      fprintf (stderr, "USAGE: main MODULENAME ARGUMENT\n");
+      exit (EXIT_FAILURE);
+    }
+
+  /* Initialise libltdl. */
+  errors = lt_dlinit ();
+
+  /* Set the module search path. */
+  if (!errors)
+    {
+      const char *path = getenv (MODULE_PATH_ENV);
+
+      if (path != NULL)
+        errors = lt_dlsetsearchpath (path);
+    }
+
+  /* Load the module. */
+  if (!errors)
+    module = lt_dlopenext (argv[1]);
+
+  /* Find the entry point. */
+  if (module)
+    {
+      run = (entrypoint *) lt_dlsym (module, "run");
+
+      /* In principle, run might legitimately be NULL, so
+         I don't use run == NULL as an error indicator
+         in general. */
+      errormsg = dlerrordup (errormsg);
+      if (errormsg != NULL)
+        {
+          errors = lt_dlclose (module);
+          module = NULL;
+        }
+    }
+  else
+    errors = 1;
+
+  /* Call the entry point function. */
+  if (!errors)
+    {
+      int result = (*run) (argv[2]);
+      if (result < 0)
+        errormsg = strdup ("module entry point execution failed");
+      else
+        printf ("\t=> %d\n", result);
+    }
+
+  /* Unload the module, now that we are done with it. */
+  if (!errors)
+    errors = lt_dlclose (module);
+
+  if (errors)
+    {
+      /* Diagnose the encountered error. */
+      errormsg = dlerrordup (errormsg);
+
+      if (!errormsg)
+        {
+          fprintf (stderr, "%s: dlerror() failed.\n", argv[0]);
+          return EXIT_FAILURE;
+        }
+    }
+
+  /* Finished with ltdl now. */
+  if (!errors)
+    if (lt_dlexit () != 0)
+      errormsg = dlerrordup (errormsg);
+
+  if (errormsg)
+    {
+      fprintf (stderr, "%s: %s.\n", argv[0], errormsg);
+      free (errormsg);
+      exit (EXIT_FAILURE);
+    }
+
+  return EXIT_SUCCESS;
+}
+
+/* Be careful to save a copy of the error message,
+   since the  next API call may overwrite the original. */
+static char *
+dlerrordup (char *errormsg)
+{
+  char *error = (char *) lt_dlerror ();
+  if (error && !errormsg)
+    errormsg = strdup (error);
+  return errormsg;
+}
+_ATEOF
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:188: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "lt_dlopenext.at:188"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:188"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:195: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c simple-module.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c simple-module.c" "lt_dlopenext.at:195"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c simple-module.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:195"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:197: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o simple-module.la 	 simple-module.lo -rpath \$libdir -module -avoid-version"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o simple-module.la 	 simple-module.lo -rpath $libdir -module -avoid-version" "lt_dlopenext.at:197"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o simple-module.la 	 simple-module.lo -rpath $libdir -module -avoid-version
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:197"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:200: \$CC \$CPPFLAGS \$CFLAGS -c ltdl-loader.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c ltdl-loader.c" "lt_dlopenext.at:200"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c ltdl-loader.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:200"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:202: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o ltdl-loader\$EXEEXT 	 ltdl-loader.\$OBJEXT -dlopen self \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o ltdl-loader$EXEEXT 	 ltdl-loader.$OBJEXT -dlopen self $LIBLTDL" "lt_dlopenext.at:202"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o ltdl-loader$EXEEXT 	 ltdl-loader.$OBJEXT -dlopen self $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:202"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:205: \$LIBTOOL --mode=install cp simple-module.la \$libdir/simple-module.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp simple-module.la $libdir/simple-module.la" "lt_dlopenext.at:205"
+( $at_check_trace; $LIBTOOL --mode=install cp simple-module.la $libdir/simple-module.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:206: \$LIBTOOL --mode=clean rm -f simple-module.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f simple-module.la" "lt_dlopenext.at:206"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f simple-module.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:206"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Try finding the module with and without the .la file, with absolute
+# path, relative path, or one of the path variables.  Do not override
+# $PATH for w32, see shlibpath.at for the hacks this requires.
+#
+# Finding the module without the .la file will not work if MODULE_EXT
+# aka. shared_ext is empty.
+
+eval `$LIBTOOL --config | $EGREP '^(shlibpath_var|shrext_cmds)='`
+
+module=no
+eval shared_ext=\"$shrext_cmds\"
+if test -n "$shared_ext"; then
+  have_lafile="with without"
+else
+  have="with"
+fi
+
+if test "$shlibpath_var" = PATH; then
+  $unset shlibpath_var || shlibpath_var=
+fi
+
+for lafile in $have_lafile; do
+  if test $lafile = without; then
+    rm $libdir/simple-module.la
+  fi
+
+  for dir in inst/lib "$libdir"; do
+    lt_exe=./ltdl-loader; if test -f "./ltdl-loader$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:235: if \"\$lt_exe\" \$dir/simple-module World; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" $dir/simple-module World; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "lt_dlopenext.at:235"
+( $at_check_trace; if "$lt_exe" $dir/simple-module World; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:235"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+    { set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:237: grep \"Hello, World\" stdout"
+at_fn_check_prepare_trace "lt_dlopenext.at:237"
+( $at_check_trace; grep "Hello, World" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:237"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+    for var in MODULE_PATH LTDL_LIBRARY_PATH $shlibpath_var
+    do
+      eval $var=\$dir
+      export $var
+      lt_exe=./ltdl-loader; if test -f "./ltdl-loader$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:243: if \"\$lt_exe\" simple-module World; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" simple-module World; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "lt_dlopenext.at:243"
+( $at_check_trace; if "$lt_exe" simple-module World; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:243"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+      { set +x
+$as_echo "$at_srcdir/lt_dlopenext.at:245: grep \"Hello, World\" stdout"
+at_fn_check_prepare_trace "lt_dlopenext.at:245"
+( $at_check_trace; grep "Hello, World" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lt_dlopenext.at:245"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+      $unset $var || eval $var=
+    done
+  done
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_78
+#AT_START_79
+at_fn_group_banner 79 'ltdl-libdir.at:23' \
+  "libdir of installed modules" "                    " 7
+at_xfail=no
+(
+  $as_echo "79. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# This test requires shared library support.
+{ set +x
+$as_echo "$at_srcdir/ltdl-libdir.at:27: \$LIBTOOL --features | grep 'enable shared libraries' || exit 77"
+at_fn_check_prepare_notrace 'a shell pipeline' "ltdl-libdir.at:27"
+( $at_check_trace; $LIBTOOL --features | grep 'enable shared libraries' || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-libdir.at:27"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# With MinGW, try Windows-style paths only.
+if pwd -W >/dev/null 2>&1; then
+  prefix=`pwd -W`/inst
+else
+  prefix=`pwd`/inst
+fi
+libdir=$prefix/lib
+bindir=$prefix/bin
+mkdir $prefix $libdir $bindir
+
+cat >a.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C"
+#endif
+int f (void)
+{
+  return 42;
+}
+_ATEOF
+
+
+cat >m.c <<'_ATEOF'
+
+#include <stdio.h>
+#include <ltdl.h>
+
+typedef int func_f(void);
+
+int
+main (int argc, const char *argv[])
+{
+  lt_dlhandle module = NULL;
+  func_f *f = NULL;
+
+  if (lt_dlinit()) {
+    fprintf(stderr, "lt_dlinit failed '%s'\n", lt_dlerror());
+    return 1;
+  }
+
+  module = lt_dlopen("./a.la");
+
+  if (!module) {
+    fprintf(stderr, "lt_dlopen failed '%s'\n", lt_dlerror());
+    return 1;
+  }
+
+  f = (func_f *)lt_dlsym(module, "f");
+
+  if (!f) {
+    fprintf(stderr, "lt_dlsym failed '%s'\n", lt_dlerror());
+    return 1;
+  }
+
+  if (f() != 42) {
+    fprintf(stderr, "f did not return 42\n");
+    return 1;
+  }
+
+  lt_dlclose(module);
+  lt_dlexit();
+  return 0;
+}
+_ATEOF
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip installcheck if --disable-ltdl-install was used.
+{ set +x
+$as_echo "$at_srcdir/ltdl-libdir.at:97: test -f \"\$LIBLTDL\" || exit 77"
+at_fn_check_prepare_dynamic "test -f \"$LIBLTDL\" || exit 77" "ltdl-libdir.at:97"
+( $at_check_trace; test -f "$LIBLTDL" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-libdir.at:97"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+
+{ set +x
+$as_echo "$at_srcdir/ltdl-libdir.at:102: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c a.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c" "ltdl-libdir.at:102"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-libdir.at:102"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ltdl-libdir.at:104: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o a.la 	 a.lo -rpath \$libdir -module -shared -avoid-version"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o a.la 	 a.lo -rpath $libdir -module -shared -avoid-version" "ltdl-libdir.at:104"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o a.la 	 a.lo -rpath $libdir -module -shared -avoid-version
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-libdir.at:104"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ltdl-libdir.at:107: \$CC \$CPPFLAGS \$CFLAGS -c m.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c m.c" "ltdl-libdir.at:107"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c m.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-libdir.at:107"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ltdl-libdir.at:109: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o m\$EXEEXT 	 m.\$OBJEXT \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT 	 m.$OBJEXT $LIBLTDL" "ltdl-libdir.at:109"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o m$EXEEXT 	 m.$OBJEXT $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-libdir.at:109"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ltdl-libdir.at:112: \$LIBTOOL --mode=install cp a.la \$libdir/a.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp a.la $libdir/a.la" "ltdl-libdir.at:112"
+( $at_check_trace; $LIBTOOL --mode=install cp a.la $libdir/a.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-libdir.at:112"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ltdl-libdir.at:114: \$LIBTOOL --mode=install cp m\$EXEEXT \$bindir/m\$EXEEXT"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp m$EXEEXT $bindir/m$EXEEXT" "ltdl-libdir.at:114"
+( $at_check_trace; $LIBTOOL --mode=install cp m$EXEEXT $bindir/m$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-libdir.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Try finding the module via the libdir entry in a misplaced .la file.
+
+mv $libdir/a.la $bindir/a.la
+cd $bindir
+lt_exe=./m; if test -f "./m$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/ltdl-libdir.at:121: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "ltdl-libdir.at:121"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-libdir.at:121"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_79
+#AT_START_80
+at_fn_group_banner 80 'ltdl-api.at:25' \
+  "ltdl API" "                                       " 7
+at_xfail=no
+(
+  $as_echo "80. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# Ensure that no symbols from argz are unrenamed.
+eval `$LIBTOOL --config | $EGREP '^(NM|global_symbol_pipe|objext)='`
+argz_o=$abs_top_builddir/libltdl/argz.$objext
+{ set +x
+$as_echo "$at_srcdir/ltdl-api.at:31: test -f \"\$argz_o\" || exit 77"
+at_fn_check_prepare_dynamic "test -f \"$argz_o\" || exit 77" "ltdl-api.at:31"
+( $at_check_trace; test -f "$argz_o" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-api.at:31"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ltdl-api.at:32: eval \"\$NM \\\"\\\$argz_o\\\" | \$global_symbol_pipe\""
+at_fn_check_prepare_notrace 'a shell pipeline' "ltdl-api.at:32"
+( $at_check_trace; eval "$NM \"\$argz_o\" | $global_symbol_pipe"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ltdl-api.at:32"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# Check for global symbols beginning with "argz_"
+{ set +x
+$as_echo "$at_srcdir/ltdl-api.at:35: grep \"^T argz_\" stdout"
+at_fn_check_prepare_trace "ltdl-api.at:35"
+( $at_check_trace; grep "^T argz_" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/ltdl-api.at:35"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# and also for the _ prefixed version "_argz_"
+{ set +x
+$as_echo "$at_srcdir/ltdl-api.at:37: grep \"^T _argz_\" stdout"
+at_fn_check_prepare_trace "ltdl-api.at:37"
+( $at_check_trace; grep "^T _argz_" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/ltdl-api.at:37"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_80
+#AT_START_81
+at_fn_group_banner 81 'dlloader-api.at:23' \
+  "dlloader API" "                                   " 7
+at_xfail=no
+(
+  $as_echo "81. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+static int
+first_init (lt_user_data data)
+{
+  const char *ctx = (const char *) data;
+
+  printf ("first_init: %s\n", ctx);
+
+  return 0;
+}
+
+static lt_module
+first_open (lt_user_data data, const char *filename, lt_dladvise advise)
+{
+  static const char *first_module = "first";
+  const char *ctx = (const char *) data;
+
+  /* Use a magic string to avoid possible interactions with filesystem
+   * objects.  Prepend '/' to short-circuit libltdl's search of
+   * $shlibpath_var (e.g. PATH, LD_LIBRARY_PATH, or similar).
+   */
+  if (!filename || strcmp (filename, "/libltdl_dlloader_api_test_first"))
+    {
+      printf ("first_open denies a request\n");
+      lt_dlseterror (LT_ERROR_FILE_NOT_FOUND);
+      return NULL;
+    }
+
+  printf ("first_open (\"%s\"): %s\n", filename, ctx);
+
+  return (lt_module) first_module;
+}
+
+static const char *
+first_symbol (void)
+{
+  return "first_symbol";
+}
+
+static void *
+first_sym (lt_user_data data, lt_module module, const char *symbolname)
+{
+  const char *ctx = (const char *) data;
+  const char *filename = (const char *) module;
+
+  printf ("first_sym (%s): %s\n", filename, ctx);
+
+  return (void *) first_symbol;
+}
+
+static int
+first_close (lt_user_data data, lt_module module)
+{
+  const char *ctx = (const char *) data;
+  const char *filename = (const char *) module;
+
+  printf ("first_close (%s): %s\n", filename, ctx);
+
+  return 0;
+}
+
+static int
+first_exit (lt_user_data data)
+{
+  const char *ctx = (const char *) data;
+
+  printf ("first_exit: %s\n", ctx);
+
+  return 0;
+}
+
+static int
+last_init (lt_user_data data)
+{
+  const char *ctx = (const char *) data;
+
+  printf ("last_init: %s\n", ctx);
+
+  return 0;
+}
+
+static lt_module
+last_open (lt_user_data data, const char *filename, lt_dladvise advise)
+{
+  static const char *last_module = "last";
+  const char *ctx = (const char *) data;
+
+  /* Use a magic string to avoid possible interactions with filesystem
+   * objects.  Prepend '/' to short-circuit libltdl's search of
+   * $shlibpath_var (e.g. PATH, LD_LIBRARY_PATH, or similar).
+   */
+  if (!filename || strcmp (filename, "/libltdl_dlloader_api_test_last"))
+    {
+      printf ("last_open denies a request\n");
+      lt_dlseterror (LT_ERROR_FILE_NOT_FOUND);
+      return NULL;
+    }
+
+  printf ("last_open (\"%s\"): %s\n", filename, ctx);
+
+  return (lt_module) last_module;
+}
+
+static const char *
+last_symbol (void)
+{
+  return "last_symbol";
+}
+
+static void *
+last_sym (lt_user_data data, lt_module module, const char *symbolname)
+{
+  const char *ctx = (const char *) data;
+  const char *filename = (const char *) module;
+
+  printf ("last_sym (%s): %s\n", filename, ctx);
+
+  return (void *) last_symbol;
+}
+
+static int
+last_close (lt_user_data data, lt_module module)
+{
+  const char *ctx = (const char *) data;
+  const char *filename = (const char *) module;
+
+  printf ("last_close (%s): %s\n", filename, ctx);
+
+  return 0;
+}
+
+static int
+last_exit (lt_user_data data)
+{
+  const char *ctx = (const char *) data;
+
+  printf ("last_exit: %s\n", ctx);
+
+  return 0;
+}
+
+typedef const char *module_func (void);
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlvtable *first;
+  lt_dlvtable *last;
+  lt_dlhandle module = NULL;
+  module_func *symbol;
+  const char *first_ctx = "first_ctx";
+  const char *last_ctx = "last_ctx";
+  const lt_dlvtable *finder;
+
+  LTDL_SET_PRELOADED_SYMBOLS ();
+
+  if (lt_dlinit ())
+    {
+      printf ("lt_dlinit failed\n");
+      return 1;
+    }
+
+  first = (lt_dlvtable *) malloc (sizeof (*first));
+  if (!first)
+    {
+      printf ("malloc failed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  first->name = "first";
+  first->sym_prefix = NULL;
+  first->module_open = first_open;
+  first->module_close = first_close;
+  first->find_sym = first_sym;
+  first->dlloader_init = first_init; /* test that it isn't called twice */
+  first->dlloader_exit = first_exit;
+  first->dlloader_data = (lt_user_data) first_ctx;
+  first->priority = LT_DLLOADER_PREPEND;
+
+  if (first_init (first->dlloader_data))
+    {
+      printf ("first_init failed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  if (lt_dlloader_add (first))
+    {
+      printf ("lt_dlloader_add failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  finder = lt_dlloader_find ("first");
+
+  if (!finder)
+    {
+      printf ("lt_dlloader_find failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("Found loader \"%s\"\n", finder->name);
+
+  last = (lt_dlvtable *) malloc (sizeof (*last));
+  if (!last)
+    {
+      printf ("malloc failed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  last->name = "last";
+  last->sym_prefix = NULL;
+  last->module_open = last_open;
+  last->module_close = last_close;
+  last->find_sym = last_sym;
+  last->dlloader_init = last_init; /* test that it isn't called twice */
+  last->dlloader_exit = last_exit;
+  last->dlloader_data = (lt_user_data) last_ctx;
+  last->priority = LT_DLLOADER_APPEND;
+
+  if (last_init (last->dlloader_data))
+    {
+      printf ("last_init failed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  if (lt_dlloader_add (last))
+    {
+      printf ("lt_dlloader_add failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  finder = lt_dlloader_find ("last");
+
+  if (!finder)
+    {
+      printf ("lt_dlloader_find failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("Found loader \"%s\"\n", finder->name);
+
+  /* Use a magic string to avoid possible interactions with filesystem
+   * objects.  Prepend '/' to short-circuit libltdl's search of
+   * $shlibpath_var (e.g. PATH, LD_LIBRARY_PATH, or similar).
+   */
+  module = lt_dlopen ("/libltdl_dlloader_api_test_first");
+
+  if (!module)
+    {
+      printf ("lt_dlopen failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  symbol = (module_func *) lt_dlsym (module, "symbol");
+
+  if (!symbol)
+    {
+      printf ("lt_dlsym failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("result: %s\n", symbol ());
+
+  lt_dlclose (module);
+  module = lt_dlopen ("./module.la");
+
+  if (!module)
+    {
+      printf ("lt_dlopen failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  symbol = (module_func *) lt_dlsym (module, "symbol");
+
+  if (!symbol)
+    {
+      printf ("lt_dlsym failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("result: %s\n", symbol ());
+
+  lt_dlclose (module);
+
+  /* Use a magic string to avoid possible interactions with filesystem
+   * objects.  Prepend '/' to short-circuit libltdl's search of
+   * $shlibpath_var (e.g. PATH, LD_LIBRARY_PATH, or similar).
+   */
+  module = lt_dlopen ("/libltdl_dlloader_api_test_last");
+
+  if (!module)
+    {
+      printf ("lt_dlopen failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  symbol = (module_func *) lt_dlsym (module, "symbol");
+
+  if (!symbol)
+    {
+      printf ("lt_dlsym failed: %s\n", lt_dlerror ());
+      err = 1;
+      goto cleanup;
+    }
+
+  printf ("result: %s\n", symbol ());
+
+  if (lt_dlopen ("no-module"))
+    {
+      printf ("lt_dlopen unexpectedly opened \"no-module\"\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  if (lt_dlloader_remove ("first") != first)
+    {
+      printf ("vtable of first loader has changed\n");
+      err = 1;
+      goto cleanup;
+    }
+
+  free (first);
+
+cleanup:
+  if (module)
+    {
+      lt_dlclose (module);
+    }
+  lt_dlexit ();
+  return err;
+}
+_ATEOF
+
+
+cat >module.c <<'_ATEOF'
+
+#ifdef __cplusplus
+extern "C"
+#endif
+const char *symbol (void);
+const char *
+symbol (void)
+{
+  return "module_symbol";
+}
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+first_init: first_ctx
+Found loader "first"
+last_init: last_ctx
+Found loader "last"
+first_open ("/libltdl_dlloader_api_test_first"): first_ctx
+first_sym (first): first_ctx
+result: first_symbol
+first_close (first): first_ctx
+first_open denies a request
+result: module_symbol
+first_open denies a request
+last_open ("/libltdl_dlloader_api_test_last"): last_ctx
+last_sym (last): last_ctx
+result: last_symbol
+first_open denies a request
+last_open denies a request
+first_exit: first_ctx
+last_close (last): last_ctx
+last_exit: last_ctx
+_ATEOF
+
+case $host_os in mingw*)
+  while read -r l; do printf "%s\r\n" "$l"; done < expout > expout.t
+  mv -f expout.t expout ;;
+esac
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/dlloader-api.at:417: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "dlloader-api.at:417"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dlloader-api.at:417"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+
+{ set +x
+$as_echo "$at_srcdir/dlloader-api.at:423: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c module.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c module.c" "dlloader-api.at:423"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c module.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dlloader-api.at:423"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/dlloader-api.at:425: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o module.la 	 -rpath /nowhere -module -avoid-version -no-undefined 	 module.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o module.la 	 -rpath /nowhere -module -avoid-version -no-undefined 	 module.lo" "dlloader-api.at:425"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o module.la 	 -rpath /nowhere -module -avoid-version -no-undefined 	 module.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dlloader-api.at:425"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+. ./module.la
+{ set +x
+$as_echo "$at_srcdir/dlloader-api.at:432: test -n \"\$dlname\" || (exit 77)"
+at_fn_check_prepare_dynamic "test -n \"$dlname\" || (exit 77)" "dlloader-api.at:432"
+( $at_check_trace; test -n "$dlname" || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/dlloader-api.at:432"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/dlloader-api.at:434: \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c main.c" "dlloader-api.at:434"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dlloader-api.at:434"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/dlloader-api.at:435: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT 	 main.\$OBJEXT -dlopen module.la \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT 	 main.$OBJEXT -dlopen module.la $LIBLTDL" "dlloader-api.at:435"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT 	 main.$OBJEXT -dlopen module.la $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dlloader-api.at:435"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/dlloader-api.at:439: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "dlloader-api.at:439"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/dlloader-api.at:439"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_81
+#AT_START_82
+at_fn_group_banner 82 'loadlibrary.at:23' \
+  "loadlibrary error messages" "                     " 7
+at_xfail=no
+(
+  $as_echo "82. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+eval "`$LIBTOOL --config | $EGREP '^(objdir)='`"
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+
+static int
+standard_error_message(const char *error)
+{
+  int error_number;
+
+  for (error_number = 0; error_number < LT_ERROR_MAX; ++error_number)
+    {
+      lt_dlseterror (error_number);
+      if (error == lt_dlerror ())
+	{
+	  return 1;
+	}
+    }
+
+  lt_dlseterror (LT_ERROR_UNKNOWN);
+  return 0;
+}
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle module = NULL;
+  const lt_dlvtable *loadlibrary;
+  const lt_dlvtable *preopen;
+  lt_dlloader loader = NULL;
+  lt_dlloader next;
+  const lt_dlvtable *vtable;
+  void *symbol;
+  const char *error;
+
+  if (argc < 2)
+    {
+      fprintf (stderr, "usage: %s plugin [symbol]\n", argv[0]);
+      return 1;
+    }
+
+  lt_dlinit ();
+
+  loadlibrary = lt_dlloader_find ("lt_loadlibrary");
+  if (!loadlibrary)
+    {
+      /* Skip if the loadlibrary loader isn't supported */
+      printf ("loadlibrary loader not found\n");
+      err = 77;
+      goto cleanup;
+    }
+
+  preopen = lt_dlloader_find ("lt_preopen");
+  if (!loadlibrary)
+    {
+      printf ("preopen loader not found\n");
+      err = 2;
+      goto cleanup;
+    }
+
+  /* Remove all loaders except the preopen and loadlibrary loaders. */
+  while (next = lt_dlloader_next (loader))
+    {
+      if (lt_dlloader_get (next) == loadlibrary)
+	{
+	  loader = next;
+	  continue;
+	}
+
+      if (lt_dlloader_get (next) == preopen)
+	{
+	  loader = next;
+	  continue;
+	}
+
+      lt_dlloader_remove (lt_dlloader_get (next)->name);
+    }
+
+  module = lt_dlopen (argv[1]);
+  error = lt_dlerror ();
+
+  if (module)
+    {
+      printf ("lt_dlopen: success!\n");
+
+      if (argc == 2)
+	{
+	  /* But failure was the desired result... */
+	  printf ("expected failure\n");
+	  err = 2;
+	  goto cleanup;
+	}
+    }
+  else if (argc > 2)
+    {
+      /* Didn't expect failure... */
+      printf ("lt_dlopen: failure: %s\n", error);
+      err = 2;
+      goto cleanup;
+    }
+  else if (standard_error_message (error))
+    {
+      /* Expected custom error message... */
+      printf ("lt_dlopen: standard error (bad): %s\n", error);
+      err = 1;
+      goto cleanup;
+    }
+  else
+    {
+      printf ("lt_dlopen: custom error (good): %s\n", error);
+      goto cleanup;
+    }
+
+  symbol = lt_dlsym (module, argv[2]);
+  error = lt_dlerror ();
+
+  if (symbol)
+    {
+      printf ("lt_dlsym: success!\n");
+    }
+  else if (standard_error_message (error))
+    {
+      /* Expected custom failure message... */
+      printf ("lt_dlsym: standard error (bad): %s\n", error);
+      err = 1;
+    }
+  else
+    {
+      printf ("lt_dlsym: custom error (good): %s\n", error);
+    }
+
+cleanup:
+  if (module)
+    {
+      lt_dlclose (module);
+    }
+  lt_dlexit ();
+  return err;
+}
+_ATEOF
+
+
+cat >foomod.c <<'_ATEOF'
+
+#ifdef __cplusplus
+extern "C"
+#endif
+int foosym (void);
+int
+foosym (void)
+{
+  return 0;
+}
+_ATEOF
+
+
+cat >bardep.c <<'_ATEOF'
+
+#ifdef __cplusplus
+extern "C"
+#endif
+int bardep (void);
+int
+bardep (void)
+{
+  return 0;
+}
+_ATEOF
+
+
+cat >barmod.c <<'_ATEOF'
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+int bardep (void);
+int barsym (void);
+#ifdef __cplusplus
+}
+#endif
+int
+barsym (void)
+{
+  return bardep ();
+}
+_ATEOF
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:217: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "loadlibrary.at:217"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:217"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+inst=`pwd`/inst
+libdir=$inst/lib
+
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:225: \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c main.c" "loadlibrary.at:225"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:225"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+for file in foomod.c bardep.c barmod.c; do
+  { set +x
+$as_echo "$at_srcdir/loadlibrary.at:227: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c \$file"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file" "loadlibrary.at:227"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:227"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:230: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o foomod.la 	 -rpath \$libdir -module -avoid-version -no-undefined 	 foomod.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o foomod.la 	 -rpath $libdir -module -avoid-version -no-undefined 	 foomod.lo" "loadlibrary.at:230"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o foomod.la 	 -rpath $libdir -module -avoid-version -no-undefined 	 foomod.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:230"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:234: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libbardep.la 	 -rpath \$libdir -avoid-version -no-undefined 	 bardep.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libbardep.la 	 -rpath $libdir -avoid-version -no-undefined 	 bardep.lo" "loadlibrary.at:234"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libbardep.la 	 -rpath $libdir -avoid-version -no-undefined 	 bardep.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:234"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:238: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o barmod.la 	 -rpath \$libdir -module -avoid-version -no-undefined 	 barmod.lo ./libbardep.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o barmod.la 	 -rpath $libdir -module -avoid-version -no-undefined 	 barmod.lo ./libbardep.la" "loadlibrary.at:238"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o barmod.la 	 -rpath $libdir -module -avoid-version -no-undefined 	 barmod.lo ./libbardep.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:238"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:243: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT 	 main.\$OBJEXT \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT 	 main.$OBJEXT $LIBLTDL" "loadlibrary.at:243"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT 	 main.$OBJEXT $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:243"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+. ./foomod.la
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:248: test -n \"\$dlname\" || (exit 77)"
+at_fn_check_prepare_dynamic "test -n \"$dlname\" || (exit 77)" "loadlibrary.at:248"
+( $at_check_trace; test -n "$dlname" || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:248"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:250: if \"\$lt_exe\" ./foomod.la no_symbol; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ./foomod.la no_symbol; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "loadlibrary.at:250"
+( $at_check_trace; if "$lt_exe" ./foomod.la no_symbol; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:250"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+#   chmod -x doesn't appear to work in MSYS, and Wine can load no-exec dlls.
+
+rm -f $objdir/$dlname
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:257: if \"\$lt_exe\" ./foomod.la; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ./foomod.la; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "loadlibrary.at:257"
+( $at_check_trace; if "$lt_exe" ./foomod.la; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:257"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:259: if \"\$lt_exe\" ./barmod.la no_symbol; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ./barmod.la no_symbol; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "loadlibrary.at:259"
+( $at_check_trace; if "$lt_exe" ./barmod.la no_symbol; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:259"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+. ./libbardep.la
+#   chmod -x doesn't appear to work in MSYS, and Wine can load no-exec dlls.
+
+rm -f $objdir/$dlname
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/loadlibrary.at:267: if \"\$lt_exe\" ./barmod.la; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ./barmod.la; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "loadlibrary.at:267"
+( $at_check_trace; if "$lt_exe" ./barmod.la; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/loadlibrary.at:267"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_82
+#AT_START_83
+at_fn_group_banner 83 'lalib-syntax.at:24' \
+  "syntax of .la files" "                            " 7
+at_xfail=yes
+(
+  $as_echo "83. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+#include <assert.h>
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle plugin_handle;
+
+  if (argc < 2)
+    {
+      fprintf (stderr, "usage: %s plugin\n", argv[0]);
+      return 1;
+    }
+
+  lt_dlinit ();
+  plugin_handle = lt_dlopenext (argv[1]);
+  if (NULL != plugin_handle)
+    {
+      printf ("plugin opened successfully!\n");
+      lt_dlclose (plugin_handle);
+    }
+  else
+    {
+      const char *error = lt_dlerror ();
+      assert (error != NULL);
+      printf ("plugin failed to open: %s\n", error);
+      err = 1;
+    }
+  lt_dlexit ();
+  return err;
+}
+_ATEOF
+
+
+cat >module.c <<'_ATEOF'
+int foo (void) { return 0; }
+_ATEOF
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/lalib-syntax.at:75: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "lalib-syntax.at:75"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lalib-syntax.at:75"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$CPPFLAGS $LTDLINCL"
+
+{ set +x
+$as_echo "$at_srcdir/lalib-syntax.at:81: \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c main.c" "lalib-syntax.at:81"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lalib-syntax.at:81"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lalib-syntax.at:82: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c module.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c module.c" "lalib-syntax.at:82"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c module.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lalib-syntax.at:82"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lalib-syntax.at:84: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o module.la module.lo 	 -module -avoid-version -rpath /somewhere"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o module.la module.lo 	 -module -avoid-version -rpath /somewhere" "lalib-syntax.at:84"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o module.la module.lo 	 -module -avoid-version -rpath /somewhere
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lalib-syntax.at:84"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/lalib-syntax.at:86: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main main.\$OBJEXT \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main main.$OBJEXT $LIBLTDL" "lalib-syntax.at:86"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main main.$OBJEXT $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lalib-syntax.at:86"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# Several bogus test cases.
+
+cat >missing-closing-quote.la <<'_ATEOF'
+# missing-closing-quote.la - a libtool library file
+# Generated by libtool
+dlname='module.so
+library_names='module.so module.so module.so'
+old_library='module.a'
+installed=no
+shouldnotlink=yes
+libdir='/somewhere'
+_ATEOF
+
+
+cat >wrong-quotes.la <<'_ATEOF'
+# wrong-quotes.la - a libtool library file
+# Generated by libtool
+dlname="module.so"
+library_names='module.so module.so module.so'
+old_library='module.a'
+installed=no
+shouldnotlink=yes
+libdir='/somewhere'
+_ATEOF
+
+
+cat >no-dlname.la <<'_ATEOF'
+# no-dlname.la - a libtool library file
+# Generated by libtool
+installed=no
+shouldnotlink=yes
+libdir='/somewhere'
+_ATEOF
+
+
+cat >nonexistent-dlname.la <<'_ATEOF'
+# nonexistent-dlname.la - a libtool library file
+# Generated by libtool
+dlname='does-not-exist.so'
+installed=no
+shouldnotlink=yes
+libdir='/somewhere'
+_ATEOF
+
+
+for file in ./missing-closing-quote.la ./wrong-quotes.la \
+	    ./no-dlname.la ./nonexistent-dlname.la; do
+  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/lalib-syntax.at:133: if \"\$lt_exe\" \$file; then :; else lt_status=\$?; 	   test \$lt_status != 1 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" $file; then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "lalib-syntax.at:133"
+( $at_check_trace; if "$lt_exe" $file; then :; else lt_status=$?; 	   test $lt_status != 1 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/lalib-syntax.at:133"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  { set +x
+$as_echo "$at_srcdir/lalib-syntax.at:134: grep 'plugin failed to open' stdout"
+at_fn_check_prepare_trace "lalib-syntax.at:134"
+( $at_check_trace; grep 'plugin failed to open' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/lalib-syntax.at:134"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_83
+#AT_START_84
+at_fn_group_banner 84 'resident.at:27' \
+  "resident modules" "                               " 7
+at_xfail=no
+(
+  $as_echo "84. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+
+int
+main (int argc, char* argv[])
+{
+  int err = 0;
+  lt_dlhandle plugin_handle;
+  lt_dladvise advise;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (argc < 2)
+    {
+      fprintf (stderr, "usage: %s plugin\n", argv[0]);
+      return 1;
+    }
+
+  lt_dlinit ();
+  if (lt_dladvise_init (&advise) != 0
+      || lt_dladvise_ext (&advise) != 0
+      || lt_dladvise_resident (&advise) != 0)
+    {
+      printf ("advise failure: %s\n", lt_dlerror ());
+      err = 1;
+    }
+  else
+    {
+      plugin_handle = lt_dlopenadvise (argv[1], advise);
+      if (NULL != plugin_handle)
+	{
+	  int (*pf) (void);
+	  printf ("plugin opened successfully!\n");
+	  pf = (int (*) (void)) lt_dlsym (plugin_handle, "setup_plugin");
+	  if (pf)
+	    pf ();
+	  else
+	    {
+	      printf ("dlsym failure: %s\n", lt_dlerror ());
+	      err = 1;
+	    }
+	  if (!lt_dlisresident (plugin_handle))
+	    {
+	      printf ("module wrongly not marked resident\n");
+	      err = 1;
+	    }
+	  if (lt_dlclose (plugin_handle) != 0)
+	    {
+	      printf ("close failure (expected): %s\n", lt_dlerror ());
+	    }
+	  else
+	    {
+	      printf ("wrongly closed resident module\n");
+	      err = 1;
+	    }
+	}
+      else
+	{
+	  printf ("plugin failed to open: %s\n", lt_dlerror ());
+	  err = 1;
+	}
+      if (lt_dladvise_destroy (&advise) != 0)
+	{
+	  printf ("advise destroy failure: %s\n", lt_dlerror ());
+	  err = 1;
+	}
+    }
+  lt_dlexit ();
+  return err;
+}
+_ATEOF
+
+
+cat >plugin.c <<'_ATEOF'
+#include <stdlib.h>
+#include <stdio.h>
+
+void
+bye (void)
+{
+  puts ("called from atexit handler");
+}
+
+#ifdef __cplusplus
+extern "C"
+#endif
+int
+setup_plugin (void)
+{
+  atexit (bye);
+}
+_ATEOF
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/resident.at:128: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "resident.at:128"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/resident.at:128"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+inst=`pwd`/inst
+libdir=$inst/lib
+
+{ set +x
+$as_echo "$at_srcdir/resident.at:137: \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c main.c" "resident.at:137"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/resident.at:137"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/resident.at:138: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c plugin.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c plugin.c" "resident.at:138"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c plugin.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/resident.at:138"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/resident.at:140: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o plugin.la -rpath \$libdir 	 -module -avoid-version plugin.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o plugin.la -rpath $libdir 	 -module -avoid-version plugin.lo" "resident.at:140"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o plugin.la -rpath $libdir 	 -module -avoid-version plugin.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/resident.at:140"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/resident.at:142: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT 	 -dlopen plugin.la \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT 	 -dlopen plugin.la $LIBLTDL" "resident.at:142"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT 	 -dlopen plugin.la $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/resident.at:142"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/resident.at:145: if \"\$lt_exe\" ./plugin.la; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ./plugin.la; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "resident.at:145"
+( $at_check_trace; if "$lt_exe" ./plugin.la; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/resident.at:145"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/resident.at:146: grep 'called from atexit handler' stdout"
+at_fn_check_prepare_trace "resident.at:146"
+( $at_check_trace; grep 'called from atexit handler' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/resident.at:146"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_84
+#AT_START_85
+at_fn_group_banner 85 'slist.at:24' \
+  "SList functionality" "                            " 7
+at_xfail=no
+(
+  $as_echo "85. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >test-slist.c <<'_ATEOF'
+
+#include <config.h>
+#include <stdlib.h>
+#include <string.h>
+#include <assert.h>
+#include <stdio.h>
+#include "slist.h"
+
+void *find_string (SList *item, void *data)
+{
+  if (data != NULL && !strcmp ((const char *) item->userdata, (const char *)data))
+    return item;
+  else
+    return NULL;
+}
+
+void boxed_delete (void *item)
+{
+  free (slist_unbox ((SList *) item));
+}
+
+void *print_item (SList *item, void *userdata)
+{
+  userdata = userdata; /* unused */
+  printf ("%s\n", (const char*)item->userdata);
+  return NULL;
+}
+
+int list_compare (const SList *item1, const SList *item2, void *userdata)
+{
+  userdata = userdata;
+  return strcmp ((const char *) item1->userdata, (const char *)item2->userdata);
+}
+
+int main ()
+{
+  int i;
+  SList *empty_list = NULL, *list = NULL, *item, *list_save;
+  char *data = NULL;
+
+  /* slist_cons */
+  list = slist_cons (NULL, NULL);
+
+  for (i=0; i < 10; ++i) {
+    data = (char *) malloc (42);
+    assert (data);
+    sprintf (data, "foo%d", i);
+    list = slist_cons (slist_box (data), list);
+  }
+  list_save = list;
+  list = slist_cons (NULL, list);
+  assert (list == list_save);
+
+
+  /* slist_find */
+  assert (slist_find (NULL, find_string, (void *) "whatever") == NULL);
+  assert (slist_find (empty_list, find_string, (void *) "whatever") == NULL);
+  assert (slist_find (list, find_string, (void *) "foo10") == NULL);
+  item = (SList *) slist_find (list, find_string, (void *) "foo1");
+  assert (item != NULL);
+  assert (!strcmp ((const char *) item->userdata, "foo1"));
+
+  item = slist_nth (list, 10);
+  assert (item != NULL && !strcmp ((const char *) item->userdata, "foo0"));
+
+  puts ("list as inserted:");
+  slist_foreach (list, print_item, NULL);
+  puts ("reversed list:");
+  list = slist_reverse (list);
+  slist_foreach (list, print_item, NULL);
+
+  item = slist_nth (list, 1);
+  assert (item != NULL && !strcmp ((const char *) item->userdata, "foo0"));
+
+  assert (10 == slist_length (list));
+
+  /* slist_tail is the second item, not the last one */
+  item = slist_tail (list);
+  assert (item != NULL && !strcmp ((const char *) item->userdata, "foo1"));
+
+  assert (slist_tail (slist_nth (list, 10)) == NULL);
+
+  /* slist_sort and implicitly, slist_sort_merge */
+  assert (slist_sort (NULL, list_compare, NULL) == NULL);
+  list = slist_sort (list, list_compare, NULL);
+  puts ("list after no-op sort:");
+  slist_foreach (list, print_item, NULL);
+
+  list = slist_reverse (list);
+  puts ("reversed list:");
+  slist_foreach (list, print_item, NULL);
+  puts ("sorting reversed list:");
+  list = slist_sort (list, list_compare, NULL);
+  slist_foreach (list, print_item, NULL);
+
+  /* slist_remove */
+  assert (slist_remove (NULL, find_string, NULL) == NULL);
+  assert (slist_remove (&empty_list, find_string, NULL) == NULL);
+
+  list_save = list;
+  assert (slist_remove (&list, find_string, NULL) == NULL);
+  assert (list_save == list);
+
+  /* remove entries: middle, last, first, not present */
+  /* slist_reverse above has left us with increasing order */
+  list_save = list;
+  item = slist_remove (&list, find_string, (void *) "foo5");
+  assert (list_save == list);
+  assert (item != NULL && !strcmp (data = (char *) slist_unbox (item), "foo5"));
+  free (data);
+
+  list_save = list;
+  item = slist_remove (&list, find_string, (void *) "foo9");
+  assert (list_save == list);
+  assert (item != NULL && !strcmp (data = (char *) slist_unbox (item), "foo9"));
+  free (data);
+
+  list_save = list;
+  item = slist_remove (&list, find_string, (void *) "foo0");
+  assert (list_save != list);
+  assert (item != NULL && !strcmp (data = (char *) slist_unbox (item), "foo0"));
+  free (data);
+
+  list_save = list;
+  item = slist_remove (&list, find_string, (void *) "foo5");
+  assert (list_save == list);
+  assert (item == NULL);
+
+  assert (slist_delete (list, boxed_delete) == NULL);
+  return 0;
+}
+_ATEOF
+
+
+CPPFLAGS="-I$top_srcdir/libltdl -I$top_srcdir/libltdl/libltdl -I$abs_top_builddir"
+{ set +x
+$as_echo "$at_srcdir/slist.at:160: \$CC \$CPPFLAGS \$CFLAGS -c test-slist.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c test-slist.c" "slist.at:160"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c test-slist.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/slist.at:160"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/slist.at:162: \$CC \$CPPFLAGS \$CFLAGS -c \$top_srcdir/libltdl/slist.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c $top_srcdir/libltdl/slist.c" "slist.at:162"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c $top_srcdir/libltdl/slist.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/slist.at:162"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/slist.at:164: \$CC \$CFLAGS \$LDFLAGS -o test-slist test-slist.\$OBJEXT slist.\$OBJEXT"
+at_fn_check_prepare_dynamic "$CC $CFLAGS $LDFLAGS -o test-slist test-slist.$OBJEXT slist.$OBJEXT" "slist.at:164"
+( $at_check_trace; $CC $CFLAGS $LDFLAGS -o test-slist test-slist.$OBJEXT slist.$OBJEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/slist.at:164"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./test-slist; if test -f "./test-slist$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/slist.at:166: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "slist.at:166"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/slist.at:166"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_85
+#AT_START_86
+at_fn_group_banner 86 'need_lib_prefix.at:25' \
+  "enforced lib prefix" "                            " 7
+at_xfail=no
+(
+  $as_echo "86. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# Originally written to simulate a failure visible on systems
+# which need a library prefix like 'lib', such as BeOS.  Currently
+# the prefix is hardcoded as 'lib', so systems that require a
+# different prefix skips the test.
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+
+typedef int fun (int);
+
+static int errors = 0;
+
+static void
+complain (const char *msg)
+{
+  const char *errmsg = lt_dlerror ();
+  fprintf (stderr, "%s", msg);
+  if (errmsg)
+    fprintf (stderr, ": %s\n", errmsg);
+  else
+    fprintf (stderr, ".\n");
+  ++errors;
+}
+
+static lt_dlhandle
+moduleopen (const char *filename)
+{
+  lt_dlhandle handle;
+
+  handle = lt_dlopen (filename);
+  if (!handle)
+    {
+      fprintf (stderr, "can't open the module %s!\n", filename);
+      complain ("error was");
+    }
+
+  return handle;
+}
+
+static int
+moduletest (lt_dlhandle handle)
+{
+  const lt_dlinfo *info = lt_dlgetinfo (handle);
+  fun *f = (fun *) lt_dlsym (handle, "f");
+  int *v = (int *) lt_dlsym (handle, "i");
+
+  if (!f)
+    {
+      complain ("function `f' not found");
+      return 1;
+    }
+  if (!v)
+    {
+      complain ("variable `i' not found");
+      return 1;
+    }
+  printf ("%s: %d\n", info->name, f (*v));
+
+  return 0;
+}
+
+int
+main (int argc, char **argv)
+{
+  lt_dlhandle handle;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (lt_dlinit() != 0)
+    {
+      fprintf (stderr, "error during initialization: %s\n", lt_dlerror());
+      return 1;
+    }
+
+  if (lt_dlpreload_open (0, moduletest) != 0)
+    complain ("error during preloading");
+
+  if (lt_dlexit () != 0)
+    complain ("error during exit");
+
+  return (errors != 0);
+}
+_ATEOF
+
+
+cat >foo1.c <<'_ATEOF'
+#define f foo1_LTX_f
+#define i foo1_LTX_i
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f (int x) { return x / 3; }
+int i = 7;
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >foo2.c <<'_ATEOF'
+#define f libfoo2_LTX_f
+#define i libfoo2_LTX_i
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f (int x) { return (x * x) / 10; }
+int i = 6;
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+libfoo1: 2
+libfoo2: 3
+_ATEOF
+
+case $host_os in mingw*)
+  while read -r l; do printf "%s\r\n" "$l"; done < expout > expout.t
+  mv -f expout.t expout ;;
+esac
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/need_lib_prefix.at:149: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "need_lib_prefix.at:149"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/need_lib_prefix.at:149"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS"
+
+# Skip this test when libraries are not normally prefixed with lib.
+# E.g., for MSVC and OS/2.
+eval "`$LIBTOOL --config | $EGREP '^(libname_spec)='`"
+name=
+eval libname=\"$libname_spec\"
+{ set +x
+$as_echo "$at_srcdir/need_lib_prefix.at:161: test \"\$libname\" = lib || exit 77"
+at_fn_check_prepare_dynamic "test \"$libname\" = lib || exit 77" "need_lib_prefix.at:161"
+( $at_check_trace; test "$libname" = lib || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/need_lib_prefix.at:161"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Create our own libtool, forcing need_lib_prefix setting
+sed 's,^\(need_lib_prefix\)=.*$,\1=unknown,' $LIBTOOL > ./libtool
+LIBTOOL="$SHELL ./libtool"
+
+# Installation directory:
+instdir=`pwd`/_inst
+
+$CC $CPPFLAGS $CFLAGS -c main.c
+for file in foo1 foo2; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file.c
+done
+
+{ set +x
+$as_echo "$at_srcdir/need_lib_prefix.at:175: \$LIBTOOL --mode=link \$CC -module -avoid-version \$CFLAGS \$LDFLAGS -o foo1.la foo1.lo -rpath \$instdir/lib"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC -module -avoid-version $CFLAGS $LDFLAGS -o foo1.la foo1.lo -rpath $instdir/lib" "need_lib_prefix.at:175"
+( $at_check_trace; $LIBTOOL --mode=link $CC -module -avoid-version $CFLAGS $LDFLAGS -o foo1.la foo1.lo -rpath $instdir/lib
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/need_lib_prefix.at:175"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/need_lib_prefix.at:177: \$LIBTOOL --mode=link \$CC -module -avoid-version \$CFLAGS \$LDFLAGS -o libfoo2.la foo2.lo -rpath \$instdir/lib"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC -module -avoid-version $CFLAGS $LDFLAGS -o libfoo2.la foo2.lo -rpath $instdir/lib" "need_lib_prefix.at:177"
+( $at_check_trace; $LIBTOOL --mode=link $CC -module -avoid-version $CFLAGS $LDFLAGS -o libfoo2.la foo2.lo -rpath $instdir/lib
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/need_lib_prefix.at:177"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/need_lib_prefix.at:179: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o main\$EXEEXT main.\$OBJEXT -dlpreopen foo1.la -dlpreopen libfoo2.la \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -dlpreopen foo1.la -dlpreopen libfoo2.la $LIBLTDL" "need_lib_prefix.at:179"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o main$EXEEXT main.$OBJEXT -dlpreopen foo1.la -dlpreopen libfoo2.la $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/need_lib_prefix.at:179"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/need_lib_prefix.at:182: if \$LIBTOOL --mode=execute -dlopen foo1.la -dlopen libfoo2.la \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=execute -dlopen foo1.la -dlopen libfoo2.la \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "need_lib_prefix.at:182"
+( $at_check_trace; if $LIBTOOL --mode=execute -dlopen foo1.la -dlopen libfoo2.la "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/need_lib_prefix.at:182"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# Install the libraries.
+mkdir $instdir
+mkdir $instdir/lib
+$LIBTOOL --mode=install cp foo1.la $instdir/lib/foo1.la
+$LIBTOOL --mode=install cp libfoo2.la $instdir/lib/libfoo2.la
+
+# Install the binary
+mkdir $instdir/bin
+$LIBTOOL --mode=install cp main$EXEEXT $instdir/bin/main$EXEEXT
+
+lt_exe=$instdir/bin/main; if test -f "$instdir/bin/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/need_lib_prefix.at:195: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "need_lib_prefix.at:195"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/need_lib_prefix.at:195"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_86
+#AT_START_87
+at_fn_group_banner 87 'standalone.at:31' \
+  "compiling softlinked libltdl" "                   " 8
+at_xfail=no
+(
+  $as_echo "87. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:33: \$LIBTOOLIZE --ltdl=.
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "standalone.at:33"
+( $at_check_trace; $LIBTOOLIZE --ltdl=.
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:33"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:34: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "standalone.at:34"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:34"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/standalone.at:35: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "standalone.at:35"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:35"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:37: test -f libltdlc.la"
+at_fn_check_prepare_trace "standalone.at:37"
+( $at_check_trace; test -f libltdlc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:37"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_87
+#AT_START_88
+at_fn_group_banner 88 'standalone.at:46' \
+  "compiling copied libltdl" "                       " 8
+at_xfail=no
+(
+  $as_echo "88. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:48: \$LIBTOOLIZE --copy --ltdl=.
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "standalone.at:48"
+( $at_check_trace; $LIBTOOLIZE --copy --ltdl=.
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:48"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:49: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "standalone.at:49"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:49"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/standalone.at:50: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "standalone.at:50"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:50"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:52: test -f libltdlc.la"
+at_fn_check_prepare_trace "standalone.at:52"
+( $at_check_trace; test -f libltdlc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:52"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_88
+#AT_START_89
+at_fn_group_banner 89 'standalone.at:61' \
+  "installable libltdl" "                            " 8
+at_xfail=no
+(
+  $as_echo "89. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+prefix=`pwd`/_inst
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:65: \$LIBTOOLIZE --copy --ltdl=.
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "standalone.at:65"
+( $at_check_trace; $LIBTOOLIZE --copy --ltdl=.
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:65"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:66: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options --enable-ltdl-install --prefix=\$prefix"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "standalone.at:66"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options --enable-ltdl-install --prefix=$prefix
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:66"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all install $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/standalone.at:67: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "standalone.at:67"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:67"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:69: test -f \$prefix/lib/libltdl.la"
+at_fn_check_prepare_dynamic "test -f $prefix/lib/libltdl.la" "standalone.at:69"
+( $at_check_trace; test -f $prefix/lib/libltdl.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:69"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:70: test -f \$prefix/include/ltdl.h"
+at_fn_check_prepare_dynamic "test -f $prefix/include/ltdl.h" "standalone.at:70"
+( $at_check_trace; test -f $prefix/include/ltdl.h
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:70"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_89
+#AT_START_90
+at_fn_group_banner 90 'standalone.at:79' \
+  "linking libltdl without autotools" "              " 8
+at_xfail=no
+(
+  $as_echo "90. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >module.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C"
+#endif
+const char *
+hello (void)
+{
+  return "Hello!";
+}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+#include <stdio.h>
+#include "ltdl.h"
+
+int
+main ()
+{
+  lt_dlhandle module;
+  const char *(*func) (void) = 0;
+  int status = 1;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during initialisation: %s\n", lt_dlerror());
+    return 1;
+  }
+
+  module = lt_dlopen("./module.la");
+  if (!module) {
+    fprintf (stderr, "error dlopening ./module.la: %s\n", lt_dlerror());
+    goto finish;
+  }
+
+  func = (const char *(*)(void)) lt_dlsym (module, "hello");
+  if (!func) {
+    fprintf (stderr, "error fetching func: %s\n", lt_dlerror());
+    goto finish;
+  }
+
+  printf ("%s\n", (*func) ());
+  status = 0;
+
+finish:
+  if (lt_dlexit() != 0) {
+    fprintf (stderr, "error during finalisation: %s\n", lt_dlerror());
+    status = 1;
+  }
+
+  return status;
+}
+_ATEOF
+
+
+
+cat >Makefile <<'_ATEOF'
+top_builddir	= .
+LIBTOOL		= ./libltdl/libtool
+INCLUDES	= -I./libltdl
+MODFLAGS	= -module -avoid-version -no-undefined
+
+LTCOMPILE = $(LIBTOOL) --tag=CC $(LIBTOOLFLAGS) --mode=compile \
+        $(CC) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LTLINK    = $(LIBTOOL) --tag=CC $(LIBTOOLFLAGS) --mode=link \
+        $(CC) $(CFLAGS) $(LDFLAGS)
+
+TARGETS		= libltdl/libltdlc.la module.la ltdldemo$(EXEEXT)
+
+all: $(TARGETS)
+
+libltdl/libltdlc.la: $(LIBTOOL) libltdl/Makefile
+	MAKE='$(MAKE)'; test -n "$$MAKE" || MAKE=make; \
+	cd libltdl && $$MAKE CC="$(CC)" LIBTOOLFLAGS="$(LIBTOOLFLAGS)" \
+	  CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" \
+          CONFIGURE_OPTIONS="$(CONFIGURE_OPTIONS)"
+
+$(LIBTOOL): libltdl/Makefile
+
+libltdl/Makefile:
+	cd libltdl && CONFIG_SHELL="$(SHELL)" $(SHELL) ./configure $(CONFIGURE_OPTIONS)
+
+ltdldemo$(EXEEXT): $(LIBTOOL) module.la libltdl/libltdlc.la main.lo
+	$(LTLINK) -o ltdldemo$(EXEEXT) main.lo -dlopen module.la ./libltdl/libltdlc.la
+
+main.lo: $(LIBTOOL) main.c
+	$(LTCOMPILE) -c main.c
+
+module.la: $(LIBTOOL) module.lo
+	$(LTLINK) -o module.la module.lo $(MODFLAGS) -rpath /dev/null
+
+module.lo: $(LIBTOOL) module.c
+	$(LTCOMPILE) -c module.c
+_ATEOF
+
+cat >> Makefile <<EOF
+SHELL = $SHELL
+EOF
+
+
+
+{ set +x
+$as_echo "$at_srcdir/standalone.at:82: \$LIBTOOLIZE --copy --ltdl
+
+"
+at_fn_check_prepare_notrace 'an embedded newline' "standalone.at:82"
+( $at_check_trace; $LIBTOOLIZE --copy --ltdl
+
+
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:82"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/standalone.at:83: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target CC=\"\$CC\" LIBTOOLFLAGS=\"\$LIBTOOLFLAGS\" CPPFLAGS=\"\$CPPFLAGS\"         CFLAGS=\"\$CFLAGS\" LDFLAGS=\"\$LDFLAGS\" 	CONFIGURE_OPTIONS=\"\$configure_options\""
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target CC=\"$CC\" LIBTOOLFLAGS=\"$LIBTOOLFLAGS\" CPPFLAGS=\"$CPPFLAGS\"         CFLAGS=\"$CFLAGS\" LDFLAGS=\"$LDFLAGS\" 	CONFIGURE_OPTIONS=\"$configure_options\"" "standalone.at:83"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target CC="$CC" LIBTOOLFLAGS="$LIBTOOLFLAGS" CPPFLAGS="$CPPFLAGS"         CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS" 	CONFIGURE_OPTIONS="$configure_options"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:83"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+lt_exe=./ltdldemo; if test -f "./ltdldemo$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/standalone.at:87: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "standalone.at:87"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/standalone.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_90
+#AT_START_91
+at_fn_group_banner 91 'subproject.at:57' \
+  "compiling softlinked libltdl" "                   " 9
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "91. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subproject-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([sub/ltdl])
+AC_CONFIG_AUX_DIR([sub/ltdl/config])
+AC_CONFIG_MACRO_DIR([sub/ltdl/m4])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+LT_WITH_LTDL
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I sub/ltdl/m4
+AUTOMAKE_OPTIONS = 1.9
+SUBDIRS = sub/ltdl
+lib_LTLIBRARIES = foo.la
+foo_la_LDFLAGS = -module -avoid-version -no-undefined
+_ATEOF
+
+
+echo 'int dummy = 0;' > foo.c
+
+
+$LIBTOOLIZE --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:61: \$ACLOCAL -I sub/ltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I sub/ltdl/m4" "subproject.at:61"
+( $at_check_trace; $ACLOCAL -I sub/ltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:61: \$AUTOMAKE --add-missing --copy"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing --copy" "subproject.at:61"
+( $at_check_trace; $AUTOMAKE --add-missing --copy
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:61"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/subproject.at:61: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "subproject.at:61"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/subproject.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:61: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "subproject.at:61"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:61: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "subproject.at:61"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/subproject.at:61: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "subproject.at:61"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:61"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:64: test -f sub/ltdl/libltdlc.la"
+at_fn_check_prepare_trace "subproject.at:64"
+( $at_check_trace; test -f sub/ltdl/libltdlc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:64"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_91
+#AT_START_92
+at_fn_group_banner 92 'subproject.at:73' \
+  "compiling copied libltdl" "                       " 9
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "92. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subproject-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([sub/ltdl])
+AC_CONFIG_AUX_DIR([sub/ltdl/config])
+AC_CONFIG_MACRO_DIR([sub/ltdl/m4])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+LT_WITH_LTDL
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I sub/ltdl/m4
+AUTOMAKE_OPTIONS = 1.9
+SUBDIRS = sub/ltdl
+lib_LTLIBRARIES = foo.la
+foo_la_LDFLAGS = -module -avoid-version -no-undefined
+_ATEOF
+
+
+echo 'int dummy = 0;' > foo.c
+
+
+$LIBTOOLIZE --copy --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:77: \$ACLOCAL -I sub/ltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I sub/ltdl/m4" "subproject.at:77"
+( $at_check_trace; $ACLOCAL -I sub/ltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:77"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:77: \$AUTOMAKE --add-missing --copy"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing --copy" "subproject.at:77"
+( $at_check_trace; $AUTOMAKE --add-missing --copy
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:77"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/subproject.at:77: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "subproject.at:77"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/subproject.at:77"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:77: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "subproject.at:77"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:77"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:77: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "subproject.at:77"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:77"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/subproject.at:77: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "subproject.at:77"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:77"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:80: test -f sub/ltdl/libltdlc.la"
+at_fn_check_prepare_trace "subproject.at:80"
+( $at_check_trace; test -f sub/ltdl/libltdlc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:80"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_92
+#AT_START_93
+at_fn_group_banner 93 'subproject.at:89' \
+  "installable libltdl" "                            " 9
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "93. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+prefix=`pwd`/_inst
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subproject-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([sub/ltdl])
+AC_CONFIG_AUX_DIR([sub/ltdl/config])
+AC_CONFIG_MACRO_DIR([sub/ltdl/m4])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+LT_WITH_LTDL
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I sub/ltdl/m4
+AUTOMAKE_OPTIONS = 1.9
+SUBDIRS = sub/ltdl
+lib_LTLIBRARIES = foo.la
+foo_la_LDFLAGS = -module -avoid-version -no-undefined
+_ATEOF
+
+
+echo 'int dummy = 0;' > foo.c
+
+
+$LIBTOOLIZE --copy --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:95: \$ACLOCAL -I sub/ltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I sub/ltdl/m4" "subproject.at:95"
+( $at_check_trace; $ACLOCAL -I sub/ltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:95: \$AUTOMAKE --add-missing --copy"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing --copy" "subproject.at:95"
+( $at_check_trace; $AUTOMAKE --add-missing --copy
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:95"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/subproject.at:95: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "subproject.at:95"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/subproject.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:95: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "subproject.at:95"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:95: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options --enable-ltdl-install --prefix=\$prefix"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "subproject.at:95"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options --enable-ltdl-install --prefix=$prefix
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all install $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/subproject.at:95: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "subproject.at:95"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:99: test -f \$prefix/lib/libltdl.la"
+at_fn_check_prepare_dynamic "test -f $prefix/lib/libltdl.la" "subproject.at:99"
+( $at_check_trace; test -f $prefix/lib/libltdl.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:99"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/subproject.at:100: test -f \$prefix/include/ltdl.h"
+at_fn_check_prepare_dynamic "test -f $prefix/include/ltdl.h" "subproject.at:100"
+( $at_check_trace; test -f $prefix/include/ltdl.h
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:100"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_93
+#AT_START_94
+at_fn_group_banner 94 'subproject.at:109' \
+  "linking libltdl without autotools" "              " 9
+at_xfail=no
+(
+  $as_echo "94. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >module.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C"
+#endif
+const char *
+hello (void)
+{
+  return "Hello!";
+}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+#include <stdio.h>
+#include "ltdl.h"
+
+int
+main ()
+{
+  lt_dlhandle module;
+  const char *(*func) (void) = 0;
+  int status = 1;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during initialisation: %s\n", lt_dlerror());
+    return 1;
+  }
+
+  module = lt_dlopen("./module.la");
+  if (!module) {
+    fprintf (stderr, "error dlopening ./module.la: %s\n", lt_dlerror());
+    goto finish;
+  }
+
+  func = (const char *(*)(void)) lt_dlsym (module, "hello");
+  if (!func) {
+    fprintf (stderr, "error fetching func: %s\n", lt_dlerror());
+    goto finish;
+  }
+
+  printf ("%s\n", (*func) ());
+  status = 0;
+
+finish:
+  if (lt_dlexit() != 0) {
+    fprintf (stderr, "error during finalisation: %s\n", lt_dlerror());
+    status = 1;
+  }
+
+  return status;
+}
+_ATEOF
+
+
+
+cat >Makefile <<'_ATEOF'
+top_builddir	= .
+LIBTOOL		= ./sub/ltdl/libtool
+INCLUDES	= -I./sub/ltdl
+MODFLAGS	= -module -avoid-version -no-undefined
+
+LTCOMPILE = $(LIBTOOL) --tag=CC $(LIBTOOLFLAGS) --mode=compile \
+        $(CC) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LTLINK    = $(LIBTOOL) --tag=CC $(LIBTOOLFLAGS) --mode=link \
+        $(CC) $(CFLAGS) $(LDFLAGS)
+
+TARGETS		= sub/ltdl/libltdlc.la module.la ltdldemo$(EXEEXT)
+
+all: $(TARGETS)
+
+sub/ltdl/libltdlc.la: $(LIBTOOL) sub/ltdl/Makefile
+	MAKE='$(MAKE)'; test -n "$$MAKE" || MAKE=make; \
+	cd sub/ltdl && $$MAKE CC="$(CC)" LIBTOOLFLAGS="$(LIBTOOLFLAGS)" \
+	  CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" \
+          CONFIGURE_OPTIONS="$(CONFIGURE_OPTIONS)"
+
+$(LIBTOOL): sub/ltdl/Makefile
+
+sub/ltdl/Makefile:
+	cd sub/ltdl && CONFIG_SHELL="$(SHELL)" $(SHELL) ./configure $(CONFIGURE_OPTIONS)
+
+ltdldemo$(EXEEXT): $(LIBTOOL) module.la sub/ltdl/libltdlc.la main.lo
+	$(LTLINK) -o ltdldemo$(EXEEXT) main.lo -dlopen module.la ./sub/ltdl/libltdlc.la
+
+main.lo: $(LIBTOOL) main.c
+	$(LTCOMPILE) -c main.c
+
+module.la: $(LIBTOOL) module.lo
+	$(LTLINK) -o module.la module.lo $(MODFLAGS) -rpath /dev/null
+
+module.lo: $(LIBTOOL) module.c
+	$(LTCOMPILE) -c module.c
+_ATEOF
+
+cat >> Makefile <<EOF
+SHELL = $SHELL
+EOF
+
+
+
+$LIBTOOLIZE --copy --ltdl=sub/ltdl
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/subproject.at:113: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target CC=\"\$CC\" LIBTOOLFLAGS=\"\$LIBTOOLFLAGS\" CPPFLAGS=\"\$CPPFLAGS\"      CFLAGS=\"\$CFLAGS\" LDFLAGS=\"\$LDFLAGS\" SHELL=\"\$SHELL\" MAKE=\"\${MAKE-make}\"      CONFIGURE_OPTIONS=\"\$configure_options\""
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "subproject.at:113"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target CC="$CC" LIBTOOLFLAGS="$LIBTOOLFLAGS" CPPFLAGS="$CPPFLAGS"      CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS" SHELL="$SHELL" MAKE="${MAKE-make}"      CONFIGURE_OPTIONS="$configure_options"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:113"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+lt_exe=./ltdldemo; if test -f "./ltdldemo$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/subproject.at:117: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "subproject.at:117"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/subproject.at:117"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_94
+#AT_START_95
+at_fn_group_banner 95 'nonrecursive.at:78' \
+  "compiling softlinked libltdl" "                   " 10
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOHEADER" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "95. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subdirectory-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+AC_CONFIG_LIBOBJ_DIR([ltdl])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign subdir-objects])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT
+LTDL_INIT([nonrecursive])
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I ltdl/m4
+AUTOMAKE_OPTIONS	= 1.9.6
+BUILT_SOURCES		=
+
+AM_CPPFLAGS		=
+AM_LDFLAGS		=
+
+include_HEADERS		=
+noinst_LTLIBRARIES	=
+lib_LTLIBRARIES		= foo.la
+EXTRA_LTLIBRARIES	=
+
+EXTRA_DIST		=
+
+CLEANFILES		=
+MOSTLYCLEANFILES	=
+
+include ltdl/Makefile.inc
+
+foo_la_LDFLAGS		= -module -avoid-version -no-undefined
+foo_la_SOURCES		= foo.c
+_ATEOF
+
+
+echo 'int dummy = 0;' > foo.c
+
+
+$LIBTOOLIZE --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:83: if test -f ltdl/configure.ac; then false; fi"
+at_fn_check_prepare_trace "nonrecursive.at:83"
+( $at_check_trace; if test -f ltdl/configure.ac; then false; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:83"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Support vanilla autoconf-2.59 & automake-1.9.6
+for file in argz.c lt__dirent.c lt__strl.c; do
+  cp ltdl/$file $file
+done
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:90: \$ACLOCAL -I ltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I ltdl/m4" "nonrecursive.at:90"
+( $at_check_trace; $ACLOCAL -I ltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:90: \$AUTOHEADER "
+at_fn_check_prepare_dynamic "$AUTOHEADER " "nonrecursive.at:90"
+( $at_check_trace; $AUTOHEADER
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:90: \$AUTOMAKE --add-missing --copy"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing --copy" "nonrecursive.at:90"
+( $at_check_trace; $AUTOMAKE --add-missing --copy
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:90"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/nonrecursive.at:90: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "nonrecursive.at:90"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/nonrecursive.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:90: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "nonrecursive.at:90"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:90: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "nonrecursive.at:90"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/nonrecursive.at:90: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "nonrecursive.at:90"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:90"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:93: test -f ltdl/libltdlc.la"
+at_fn_check_prepare_trace "nonrecursive.at:93"
+( $at_check_trace; test -f ltdl/libltdlc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:93"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_95
+#AT_START_96
+at_fn_group_banner 96 'nonrecursive.at:102' \
+  "compiling copied libltdl" "                       " 10
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOHEADER" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "96. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subdirectory-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+AC_CONFIG_LIBOBJ_DIR([ltdl])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign subdir-objects])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT
+LTDL_INIT([nonrecursive])
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I ltdl/m4
+AUTOMAKE_OPTIONS	= 1.9.6
+BUILT_SOURCES		=
+
+AM_CPPFLAGS		=
+AM_LDFLAGS		=
+
+include_HEADERS		=
+noinst_LTLIBRARIES	=
+lib_LTLIBRARIES		= foo.la
+EXTRA_LTLIBRARIES	=
+
+EXTRA_DIST		=
+
+CLEANFILES		=
+MOSTLYCLEANFILES	=
+
+include ltdl/Makefile.inc
+
+foo_la_LDFLAGS		= -module -avoid-version -no-undefined
+foo_la_SOURCES		= foo.c
+_ATEOF
+
+
+echo 'int dummy = 0;' > foo.c
+
+
+$LIBTOOLIZE --copy --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:107: if test -f ltdl/configure.ac; then false; fi"
+at_fn_check_prepare_trace "nonrecursive.at:107"
+( $at_check_trace; if test -f ltdl/configure.ac; then false; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:107"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Support vanilla autoconf-2.59 & automake-1.9.6
+for file in argz.c lt__dirent.c lt__strl.c; do
+  cp ltdl/$file $file
+done
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:114: \$ACLOCAL -I ltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I ltdl/m4" "nonrecursive.at:114"
+( $at_check_trace; $ACLOCAL -I ltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:114: \$AUTOHEADER "
+at_fn_check_prepare_dynamic "$AUTOHEADER " "nonrecursive.at:114"
+( $at_check_trace; $AUTOHEADER
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:114: \$AUTOMAKE --add-missing --copy"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing --copy" "nonrecursive.at:114"
+( $at_check_trace; $AUTOMAKE --add-missing --copy
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:114"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/nonrecursive.at:114: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "nonrecursive.at:114"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/nonrecursive.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:114: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "nonrecursive.at:114"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:114: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "nonrecursive.at:114"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/nonrecursive.at:114: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "nonrecursive.at:114"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:117: test -f ltdl/libltdlc.la"
+at_fn_check_prepare_trace "nonrecursive.at:117"
+( $at_check_trace; test -f ltdl/libltdlc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:117"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_96
+#AT_START_97
+at_fn_group_banner 97 'nonrecursive.at:126' \
+  "installable libltdl" "                            " 10
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOHEADER" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "97. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subdirectory-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+AC_CONFIG_LIBOBJ_DIR([ltdl])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign subdir-objects])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT
+LTDL_INIT([nonrecursive])
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I ltdl/m4
+AUTOMAKE_OPTIONS	= 1.9.6
+BUILT_SOURCES		=
+
+AM_CPPFLAGS		=
+AM_LDFLAGS		=
+
+include_HEADERS		=
+noinst_LTLIBRARIES	=
+lib_LTLIBRARIES		= foo.la
+EXTRA_LTLIBRARIES	=
+
+EXTRA_DIST		=
+
+CLEANFILES		=
+MOSTLYCLEANFILES	=
+
+include ltdl/Makefile.inc
+
+foo_la_LDFLAGS		= -module -avoid-version -no-undefined
+foo_la_SOURCES		= foo.c
+_ATEOF
+
+
+echo 'int dummy = 0;' > foo.c
+
+
+prefix=`pwd`/_inst
+
+$LIBTOOLIZE --copy --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:133: if test -f ltdl/configure.ac; then false; fi"
+at_fn_check_prepare_trace "nonrecursive.at:133"
+( $at_check_trace; if test -f ltdl/configure.ac; then false; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:133"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Support vanilla autoconf-2.59 & automake-1.9.6
+for file in argz.c lt__dirent.c lt__strl.c; do
+  cp ltdl/$file $file
+done
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:140: \$ACLOCAL -I ltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I ltdl/m4" "nonrecursive.at:140"
+( $at_check_trace; $ACLOCAL -I ltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:140"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:140: \$AUTOHEADER "
+at_fn_check_prepare_dynamic "$AUTOHEADER " "nonrecursive.at:140"
+( $at_check_trace; $AUTOHEADER
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:140"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:140: \$AUTOMAKE --add-missing --copy"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing --copy" "nonrecursive.at:140"
+( $at_check_trace; $AUTOMAKE --add-missing --copy
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:140"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/nonrecursive.at:140: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "nonrecursive.at:140"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/nonrecursive.at:140"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:140: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "nonrecursive.at:140"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:140"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:140: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options --enable-ltdl-install --prefix=\$prefix"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "nonrecursive.at:140"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options --enable-ltdl-install --prefix=$prefix
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:140"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all install $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/nonrecursive.at:140: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "nonrecursive.at:140"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:140"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:143: test -f \$prefix/lib/libltdl.la"
+at_fn_check_prepare_dynamic "test -f $prefix/lib/libltdl.la" "nonrecursive.at:143"
+( $at_check_trace; test -f $prefix/lib/libltdl.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:143"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/nonrecursive.at:144: test -f \$prefix/include/ltdl.h"
+at_fn_check_prepare_dynamic "test -f $prefix/include/ltdl.h" "nonrecursive.at:144"
+( $at_check_trace; test -f $prefix/include/ltdl.h
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/nonrecursive.at:144"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_97
+#AT_START_98
+at_fn_group_banner 98 'recursive.at:60' \
+  "compiling softlinked libltdl" "                   " 11
+at_xfail=no
+      case ,$AUTORECONF,$AUTOCONF,$AUTOHEADER,$ACLOCAL,$AUTOMAKE, in *,no,*) :;; *) false;; esac && at_xfail=yes
+(
+  $as_echo "98. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subdirectory-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+AC_CONFIG_LIBOBJ_DIR([ltdl])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+LTDL_INIT([recursive])
+AC_CONFIG_FILES([Makefile ltdl/Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I ltdl/m4
+AUTOMAKE_OPTIONS = 1.7
+SUBDIRS = ltdl
+lib_LTLIBRARIES = foo.la
+foo_la_LDFLAGS = -module -avoid-version -no-undefined
+foo_la_SOURCES = foo.c
+_ATEOF
+
+
+echo 'int dummy = 0;' > foo.c
+
+
+$LIBTOOLIZE --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:65: if test -f ltdl/configure.ac; then false; fi"
+at_fn_check_prepare_trace "recursive.at:65"
+( $at_check_trace; if test -f ltdl/configure.ac; then false; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:65"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:67: \$AUTORECONF --force --verbose --install"
+at_fn_check_prepare_dynamic "$AUTORECONF --force --verbose --install" "recursive.at:67"
+( $at_check_trace; $AUTORECONF --force --verbose --install
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:67"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/recursive.at:67: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "recursive.at:67"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/recursive.at:67"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:68: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "recursive.at:68"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:68"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/recursive.at:69: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "recursive.at:69"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:69"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:71: test -f ltdl/libltdlc.la"
+at_fn_check_prepare_trace "recursive.at:71"
+( $at_check_trace; test -f ltdl/libltdlc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:71"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_98
+#AT_START_99
+at_fn_group_banner 99 'recursive.at:80' \
+  "compiling copied libltdl" "                       " 11
+at_xfail=no
+      case ,$AUTORECONF,$AUTOCONF,$AUTOHEADER,$ACLOCAL,$AUTOMAKE, in *,no,*) :;; *) false;; esac && at_xfail=yes
+(
+  $as_echo "99. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subdirectory-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+AC_CONFIG_LIBOBJ_DIR([ltdl])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+LTDL_INIT([recursive])
+AC_CONFIG_FILES([Makefile ltdl/Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I ltdl/m4
+AUTOMAKE_OPTIONS = 1.7
+SUBDIRS = ltdl
+lib_LTLIBRARIES = foo.la
+foo_la_LDFLAGS = -module -avoid-version -no-undefined
+foo_la_SOURCES = foo.c
+_ATEOF
+
+
+echo 'int dummy = 0;' > foo.c
+
+
+$LIBTOOLIZE --copy --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:85: if test -f ltdl/configure.ac; then false; fi"
+at_fn_check_prepare_trace "recursive.at:85"
+( $at_check_trace; if test -f ltdl/configure.ac; then false; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:87: \$AUTORECONF --force --verbose --install"
+at_fn_check_prepare_dynamic "$AUTORECONF --force --verbose --install" "recursive.at:87"
+( $at_check_trace; $AUTORECONF --force --verbose --install
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:87"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/recursive.at:87: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "recursive.at:87"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/recursive.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:88: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "recursive.at:88"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:88"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/recursive.at:89: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "recursive.at:89"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:89"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:91: test -f ltdl/libltdlc.la"
+at_fn_check_prepare_trace "recursive.at:91"
+( $at_check_trace; test -f ltdl/libltdlc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:91"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_99
+#AT_START_100
+at_fn_group_banner 100 'recursive.at:100' \
+  "installable libltdl" "                            " 11
+at_xfail=no
+      case ,$AUTORECONF,$AUTOCONF,$AUTOHEADER,$ACLOCAL,$AUTOMAKE, in *,no,*) :;; *) false;; esac && at_xfail=yes
+(
+  $as_echo "100. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([subdirectory-demo], 2.4.2, bug-libtool@gnu.org)
+LT_CONFIG_LTDL_DIR([ltdl])
+AC_CONFIG_AUX_DIR([ltdl/config])
+AC_CONFIG_MACRO_DIR([ltdl/m4])
+AC_CONFIG_LIBOBJ_DIR([ltdl])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign])
+LT_INIT
+LTDL_INIT([recursive])
+AC_CONFIG_FILES([Makefile ltdl/Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+ACLOCAL_AMFLAGS = -I ltdl/m4
+AUTOMAKE_OPTIONS = 1.7
+SUBDIRS = ltdl
+lib_LTLIBRARIES = foo.la
+foo_la_LDFLAGS = -module -avoid-version -no-undefined
+foo_la_SOURCES = foo.c
+_ATEOF
+
+
+echo 'int dummy = 0;' > foo.c
+
+
+prefix=`pwd`/_inst
+
+$LIBTOOLIZE --copy --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:107: if test -f ltdl/configure.ac; then false; fi"
+at_fn_check_prepare_trace "recursive.at:107"
+( $at_check_trace; if test -f ltdl/configure.ac; then false; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:107"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:109: \$AUTORECONF --force --verbose --install"
+at_fn_check_prepare_dynamic "$AUTORECONF --force --verbose --install" "recursive.at:109"
+( $at_check_trace; $AUTORECONF --force --verbose --install
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:109"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/recursive.at:109: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "recursive.at:109"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/recursive.at:109"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:110: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options --enable-ltdl-install --prefix=\$prefix"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "recursive.at:110"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options --enable-ltdl-install --prefix=$prefix
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:110"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all install $tst_dist
+do
+  { set +x
+$as_echo "$at_srcdir/recursive.at:111: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "recursive.at:111"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:111"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:113: test -f \$prefix/lib/libltdl.la"
+at_fn_check_prepare_dynamic "test -f $prefix/lib/libltdl.la" "recursive.at:113"
+( $at_check_trace; test -f $prefix/lib/libltdl.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:113"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/recursive.at:114: test -f \$prefix/include/ltdl.h"
+at_fn_check_prepare_dynamic "test -f $prefix/include/ltdl.h" "recursive.at:114"
+( $at_check_trace; test -f $prefix/include/ltdl.h
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/recursive.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_100
+#AT_START_101
+at_fn_group_banner 101 'template.at:27' \
+  "simple template test" "                           " 12
+at_xfail=no
+(
+  $as_echo "101. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/template.at:28: { test -n \"\$CXX\" && test \"X\$CXX\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$CXX\" && test \"X$CXX\" != Xno; } || (exit 77)" "template.at:28"
+( $at_check_trace; { test -n "$CXX" && test "X$CXX" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:28"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:28: test \"X\$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)"
+at_fn_check_prepare_dynamic "test \"X$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)" "template.at:28"
+( $at_check_trace; test "X$CXX" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:28"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+cat >aclib.h <<'_ATEOF'
+int cf(int);
+_ATEOF
+
+
+cat >aclib.cpp <<'_ATEOF'
+#include "aclib.h"
+template<typename T>
+
+T cq(T b)
+{
+  return b * 3;
+}
+
+int cf(int i)
+{
+  return cq(i);
+}
+_ATEOF
+
+
+cat >alib.h <<'_ATEOF'
+int f(int);
+_ATEOF
+
+
+cat >alib.cpp <<'_ATEOF'
+#include "alib.h"
+
+template<typename T>
+T q(T b)
+{
+  return b * 2;
+}
+
+int f(int i)
+{
+  return q(i);
+}
+_ATEOF
+
+
+cat >prog.cpp <<'_ATEOF'
+#include "alib.h"
+#include "aclib.h"
+
+int main()
+{
+  return f(3) + 3 - cf(3) != 0;
+}
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/template.at:79: \$LIBTOOL --tag=CXX --mode=compile \$CXX -I. \$CPPFLAGS \$CXXFLAGS -c -o alib.lo alib.cpp"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=compile $CXX -I. $CPPFLAGS $CXXFLAGS -c -o alib.lo alib.cpp" "template.at:79"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=compile $CXX -I. $CPPFLAGS $CXXFLAGS -c -o alib.lo alib.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:79"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:81: \$LIBTOOL --tag=CXX --mode=compile \$CXX -I. \$CPPFLAGS \$CXXFLAGS -c -o aclib.lo aclib.cpp"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=compile $CXX -I. $CPPFLAGS $CXXFLAGS -c -o aclib.lo aclib.cpp" "template.at:81"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=compile $CXX -I. $CPPFLAGS $CXXFLAGS -c -o aclib.lo aclib.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:81"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:83: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CPPFLAGS \$CXXFLAGS \$LDFLAGS -o libaclib.la aclib.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CPPFLAGS $CXXFLAGS $LDFLAGS -o libaclib.la aclib.lo" "template.at:83"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CPPFLAGS $CXXFLAGS $LDFLAGS -o libaclib.la aclib.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:83"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:85: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CPPFLAGS \$CXXFLAGS \$LDFLAGS -o libalib.la -rpath /nonexistent alib.lo libaclib.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CPPFLAGS $CXXFLAGS $LDFLAGS -o libalib.la -rpath /nonexistent alib.lo libaclib.la" "template.at:85"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CPPFLAGS $CXXFLAGS $LDFLAGS -o libalib.la -rpath /nonexistent alib.lo libaclib.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:87: \$CXX -I. \$CPPFLAGS \$CXXFLAGS -c prog.cpp"
+at_fn_check_prepare_dynamic "$CXX -I. $CPPFLAGS $CXXFLAGS -c prog.cpp" "template.at:87"
+( $at_check_trace; $CXX -I. $CPPFLAGS $CXXFLAGS -c prog.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:89: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CPPFLAGS \$CXXFLAGS \$LDFLAGS -o prog\$EXEEXT prog.\$OBJEXT libalib.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CPPFLAGS $CXXFLAGS $LDFLAGS -o prog$EXEEXT prog.$OBJEXT libalib.la" "template.at:89"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CPPFLAGS $CXXFLAGS $LDFLAGS -o prog$EXEEXT prog.$OBJEXT libalib.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:89"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./prog; if test -f "./prog$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/template.at:92: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "template.at:92"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:92"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_101
+#AT_START_102
+at_fn_group_banner 102 'template.at:126' \
+  "template test with subdirs" "                     " 12
+at_xfail=no
+(
+  $as_echo "102. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/template.at:127: { test -n \"\$CXX\" && test \"X\$CXX\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$CXX\" && test \"X$CXX\" != Xno; } || (exit 77)" "template.at:127"
+( $at_check_trace; { test -n "$CXX" && test "X$CXX" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:127"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:127: test \"X\$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)"
+at_fn_check_prepare_dynamic "test \"X$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)" "template.at:127"
+( $at_check_trace; test "X$CXX" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:127"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+noskip=:
+# Mac OS X.
+# The linker has issues with this test.
+case $host in
+*-darwin*) noskip=false ;;
+esac
+
+
+CPPFLAGS="$CPPFLAGS -I../src/lib -I../src/lib2"
+
+mkdir src obj
+( cd src; mkdir lib lib2 sub )
+( cd obj; mkdir lib lib2 sub )
+
+cat >src/lib/a.hh <<'_ATEOF'
+template <class T>
+unsigned int a(const T&);
+
+template <class T>
+unsigned int a(const T& t)
+{
+  return sizeof t;
+}
+
+extern int a2(char t);
+
+inline int a3(const double* t)
+{
+  return a(t);
+}
+_ATEOF
+
+
+cat >src/lib/a.cpp <<'_ATEOF'
+#include "a.hh"
+
+int a2(char t)
+{
+  return a(t);
+}
+_ATEOF
+
+
+cat >src/lib2/b.hh <<'_ATEOF'
+#include "a.hh"
+
+template <class T>
+unsigned int b(T& t)
+{
+  return a(t);
+}
+extern int b2(char* t);
+struct bs { int bi; };
+extern int b3(bs t);
+_ATEOF
+
+
+cat >src/lib2/b.cpp <<'_ATEOF'
+#include "b.hh"
+
+int b2(char* t)
+{
+  return a2(t[0]);
+}
+
+int b3(bs t)
+{
+  return b(t);
+}
+_ATEOF
+
+
+cat >src/sub/main.cpp <<'_ATEOF'
+#include "b.hh"
+
+int main()
+{
+  double foo;
+  const char s = ' ';
+  char d;
+  char *t = &d;
+  return b(foo) + a3(&foo) + b2(t) - a(s)
+         - (sizeof(double) + sizeof(double*));
+}
+_ATEOF
+
+
+cd obj
+
+# If the compiler supports -c -o, we want to use it:
+# it may make a difference for templates
+eval `$LIBTOOL --tag=CXX --config | grep ^compiler_c_o=`
+case $compiler_c_o in
+yes)
+  main_o=sub/main.$OBJEXT
+  { set +x
+$as_echo "$at_srcdir/template.at:220: \$CXX \$CPPFLAGS \$CXXFLAGS -c -o \$main_o ../src/sub/main.cpp"
+at_fn_check_prepare_dynamic "$CXX $CPPFLAGS $CXXFLAGS -c -o $main_o ../src/sub/main.cpp" "template.at:220"
+( $at_check_trace; $CXX $CPPFLAGS $CXXFLAGS -c -o $main_o ../src/sub/main.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:220"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  ;;
+*)
+  main_o=main.$OBJEXT
+  { set +x
+$as_echo "$at_srcdir/template.at:225: \$CXX \$CPPFLAGS \$CXXFLAGS -c ../src/sub/main.cpp"
+at_fn_check_prepare_dynamic "$CXX $CPPFLAGS $CXXFLAGS -c ../src/sub/main.cpp" "template.at:225"
+( $at_check_trace; $CXX $CPPFLAGS $CXXFLAGS -c ../src/sub/main.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:225"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  ;;
+esac
+
+{ set +x
+$as_echo "$at_srcdir/template.at:230: \$LIBTOOL --tag=CXX --mode=compile \$CXX \$CPPFLAGS \$CXXFLAGS -c -o lib/a.lo ../src/lib/a.cpp"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS -c -o lib/a.lo ../src/lib/a.cpp" "template.at:230"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS -c -o lib/a.lo ../src/lib/a.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:230"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:232: \$LIBTOOL --tag=CXX --mode=compile \$CXX \$CPPFLAGS \$CXXFLAGS -c -o lib2/b.lo ../src/lib2/b.cpp"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS -c -o lib2/b.lo ../src/lib2/b.cpp" "template.at:232"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS -c -o lib2/b.lo ../src/lib2/b.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:232"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:234: \$CXX \$CPPFLAGS \$CXXFLAGS -c ../src/sub/main.cpp"
+at_fn_check_prepare_dynamic "$CXX $CPPFLAGS $CXXFLAGS -c ../src/sub/main.cpp" "template.at:234"
+( $at_check_trace; $CXX $CPPFLAGS $CXXFLAGS -c ../src/sub/main.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:234"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# both convenience
+{ set +x
+$as_echo "$at_srcdir/template.at:237: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o lib/liba.la lib/a.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib/liba.la lib/a.lo" "template.at:237"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib/liba.la lib/a.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:237"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:239: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o lib2/libb.la lib2/b.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo" "template.at:239"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:239"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:241: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o sub/main\$EXEEXT \$main_o lib2/libb.la lib/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la lib/liba.la" "template.at:241"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la lib/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:241"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./sub/main; if test -f "./sub/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/template.at:243: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != ignore && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != ignore && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "template.at:243"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != ignore && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_skip $at_status "$at_srcdir/template.at:243"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# lib convenience
+if $noskip; then
+  { set +x
+$as_echo "$at_srcdir/template.at:246: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o lib2/libb.la lib2/b.lo -rpath /foo"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo -rpath /foo" "template.at:246"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo -rpath /foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:246"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/template.at:248: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o sub/main\$EXEEXT \$main_o lib2/libb.la lib/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la lib/liba.la" "template.at:248"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la lib/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:248"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./sub/main; if test -f "./sub/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/template.at:250: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "template.at:250"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:250"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+fi
+
+# both installed
+{ set +x
+$as_echo "$at_srcdir/template.at:254: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o lib/liba.la lib/a.lo -rpath /foo"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib/liba.la lib/a.lo -rpath /foo" "template.at:254"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib/liba.la lib/a.lo -rpath /foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:254"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:256: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o lib2/libb.la lib2/b.lo -rpath /bar"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo -rpath /bar" "template.at:256"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo -rpath /bar
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:256"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:258: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o sub/main\$EXEEXT \$main_o lib2/libb.la lib/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la lib/liba.la" "template.at:258"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la lib/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:258"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./sub/main; if test -f "./sub/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/template.at:260: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "template.at:260"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:260"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# both convenience, libb depending on liba
+{ set +x
+$as_echo "$at_srcdir/template.at:262: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o lib/liba.la lib/a.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib/liba.la lib/a.lo" "template.at:262"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib/liba.la lib/a.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:262"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:264: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la" "template.at:264"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:264"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/template.at:266: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o sub/main\$EXEEXT \$main_o lib2/libb.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la" "template.at:266"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:266"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+lt_exe=./sub/main; if test -f "./sub/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/template.at:268: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "template.at:268"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:268"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# lib convenience
+if $noskip; then
+
+  { set +x
+$as_echo "$at_srcdir/template.at:272: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la -rpath /foo"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la -rpath /foo" "template.at:272"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la -rpath /foo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:272"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/template.at:274: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o sub/main\$EXEEXT \$main_o lib2/libb.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la" "template.at:274"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:274"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./sub/main; if test -f "./sub/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/template.at:276: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "template.at:276"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:276"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+fi
+# both installed
+if $noskip; then
+  { set +x
+$as_echo "$at_srcdir/template.at:280: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la -rpath /bar"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la -rpath /bar" "template.at:280"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o lib2/libb.la lib2/b.lo lib/liba.la -rpath /bar
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:280"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/template.at:282: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS -o sub/main\$EXEEXT \$main_o lib2/libb.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la" "template.at:282"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS -o sub/main$EXEEXT $main_o lib2/libb.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:282"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./sub/main; if test -f "./sub/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/template.at:284: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "template.at:284"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:284"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+fi
+
+cd ..
+
+{ set +x
+$as_echo "$at_srcdir/template.at:289: \$noskip || (exit 77)"
+at_fn_check_prepare_dynamic "$noskip || (exit 77)" "template.at:289"
+( $at_check_trace; $noskip || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/template.at:289"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_102
+#AT_START_103
+at_fn_group_banner 103 'ctor.at:27' \
+  "C++ static constructors" "                        " 13
+at_xfail=no
+(
+  $as_echo "103. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/ctor.at:28: { test -n \"\$CXX\" && test \"X\$CXX\" != Xno; } || (exit 77)"
+at_fn_check_prepare_dynamic "{ test -n \"$CXX\" && test \"X$CXX\" != Xno; } || (exit 77)" "ctor.at:28"
+( $at_check_trace; { test -n "$CXX" && test "X$CXX" != Xno; } || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/ctor.at:28"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ctor.at:28: test \"X\$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)"
+at_fn_check_prepare_dynamic "test \"X$CXX\" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)" "ctor.at:28"
+( $at_check_trace; test "X$CXX" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/ctor.at:28"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+cat >class.h <<'_ATEOF'
+#define magic 0xaabbccdd
+class Foo {
+public:
+	Foo() { bar = magic; }
+	unsigned bar;
+};
+
+extern Foo instance;
+_ATEOF
+
+
+cat >libctor.cpp <<'_ATEOF'
+#include "class.h"
+Foo instance;
+_ATEOF
+
+
+cat >main.cpp <<'_ATEOF'
+#include "class.h"
+
+int main(void)
+{
+  return instance.bar != magic;
+}
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/ctor.at:56: \$LIBTOOL --tag=CXX --mode=compile \$CXX \$CPPFLAGS \$CXXFLAGS \\
+	  -c libctor.cpp -o libctor.lo"
+at_fn_check_prepare_notrace 'an embedded newline' "ctor.at:56"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS \
+	  -c libctor.cpp -o libctor.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ctor.at:56"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ctor.at:58: \$LIBTOOL --tag=CXX --mode=compile \$CXX \$CPPFLAGS \$CXXFLAGS \\
+	  -c main.cpp -o main.lo"
+at_fn_check_prepare_notrace 'an embedded newline' "ctor.at:58"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=compile $CXX $CPPFLAGS $CXXFLAGS \
+	  -c main.cpp -o main.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ctor.at:58"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ctor.at:60: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS \\
+	  libctor.lo -o libctor.la -rpath /none"
+at_fn_check_prepare_notrace 'an embedded newline' "ctor.at:60"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS \
+	  libctor.lo -o libctor.la -rpath /none
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ctor.at:60"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/ctor.at:62: \$LIBTOOL --tag=CXX --mode=link \$CXX \$CXXFLAGS \$LDFLAGS \\
+	  main.lo libctor.la -o main\$EXEEXT"
+at_fn_check_prepare_notrace 'an embedded newline' "ctor.at:62"
+( $at_check_trace; $LIBTOOL --tag=CXX --mode=link $CXX $CXXFLAGS $LDFLAGS \
+	  main.lo libctor.la -o main$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/ctor.at:62"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/ctor.at:65: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "ctor.at:65"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/ctor.at:65"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_103
+#AT_START_104
+at_fn_group_banner 104 'exceptions.at:24' \
+  "C++ exception handling" "                         " 13
+at_xfail=no
+(
+  $as_echo "104. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:33: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "exceptions.at:33"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:33"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+
+# Win32 (and cygwin) notes
+# ------------------------
+# When using C++ and Win32 DLLs, data types used in the DLL's interface
+# which are other-than-POD, must have vtables, typeinfo, and other
+# elements resolved when the client is linked.  This includes exception
+# classes.  Therefore, the exception class "modexc" thrown by the
+# dynamically-loaded module must be defined in a separate DLL, to which
+# both that module and main must be directly linked; hence, the 'common'
+# library. Not using a 'common' library in this manner represents an
+# ODR violation, unless the platform's runtime loader is capable of
+# rationalizing vague linkage items such as vtables, typeinfo, and
+# typename elements) at runtime.  The Win32 loader is not capable of
+# this, but some ELF loaders appear to be.
+#
+# Similar treatment is not necessary for liba (e.g. the libexc
+# exception class), because that library is not dynamically loaded. As a
+# consequence, vague linkage items for the class libexc are resolved at
+# link time using the vague linkage rules, for both Win32 and other
+# (e.g. ELF) platforms.
+#
+# Also, when linking a C++ DLL with another C++ DLL, some versions of
+# the GNU toolchain on Win32 (or cygwin) mistakenly re-export symbols
+# that were imported from the other DLL, when the client DLL is linked
+# using -export-all-symbols.  Similar issues MAY also arise with those
+# versions of the GNU toolchain if using the libtool link flags
+# -export-symbols LIST or -export-symbols-regex REGEX, if any symbols
+# from the dependency, rather than client, library are listed (or match
+# the regex).  However, in this test, none of these situations apply,
+# so we don't directly address it.  Otherwise, the correct mechanism
+# would be to avoid all of those flags, and instead explicitly decorate
+# all symbols with appropriate __declspec (dllexport) or
+# __declspec (dllimport) flags when building the DLLs and the clients.
+#
+# For more information, see these two threads:
+#   http://lists.gnu.org/archive/html/bug-libtool/2010-06/msg00069.html
+#   http://cygwin.com/ml/cygwin/2010-06/msg00392.html
+# To sum up: C++ is complicated.
+cat >common.h <<'_ATEOF'
+#ifndef LIBTOOL_TEST_COMMON_HEADER
+#define LIBTOOL_TEST_COMMON_HEADER
+
+#include <exception>
+#include <string>
+
+#if defined(__CYGWIN__) || defined(_WIN32)
+# if defined(DLL_EXPORT) || defined(USING_COMMON_DLL)
+#  if defined(LIBTOOL_TEST_IN_COMMON)
+#   define COMMON_IMPEXP __declspec (dllexport)
+#  else
+#   define COMMON_IMPEXP __declspec (dllimport)
+#  endif
+# else
+#  define COMMON_IMPEXP
+# endif
+#else
+# define COMMON_IMPEXP
+#endif
+
+class COMMON_IMPEXP modexc : public std::exception {
+public:
+  modexc (std::string str) : message (str) { }
+  ~modexc () throw () { }
+  virtual const char *what () const throw ()
+  {
+    return message.c_str ();
+  }
+private:
+  std::string message;
+};
+
+extern "C" int COMMON_IMPEXP common_dummy (void);
+#endif
+_ATEOF
+
+
+cat >common.cpp <<'_ATEOF'
+#define LIBTOOL_TEST_IN_COMMON
+#include "common.h"
+
+extern "C"
+int common_dummy (void)
+{
+  return 0;
+}
+_ATEOF
+
+
+cat >module.h <<'_ATEOF'
+#include "common.h"
+
+#if defined(__CYGWIN__) || defined(_WIN32)
+# if defined(DLL_EXPORT) || defined(USING_MODULE_DLL)
+#  if defined(LIBTOOL_TEST_IN_MODULE)
+#   define MODULE_IMPEXP __declspec (dllexport)
+#  else
+#   define MODULE_IMPEXP __declspec (dllimport)
+#  endif
+# else
+#  define MODULE_IMPEXP
+# endif
+#else
+# define MODULE_IMPEXP
+#endif
+
+extern "C" int MODULE_IMPEXP modfoo () throw (modexc);
+_ATEOF
+
+
+cat >module.cpp <<'_ATEOF'
+#include <iostream>
+#define LIBTOOL_TEST_IN_MODULE
+#include "module.h"
+
+int modbar (void) throw (modexc)
+{
+  throw modexc ("exception in module");
+}
+
+extern "C"
+int modfoo (void) throw (modexc)
+{
+  try {
+    modbar ();
+  }
+  catch (modexc e) {
+    std::cerr << "caught inside module: " << e.what () << '\n';
+    throw modexc ("exception from module");
+  }
+  return 0;
+}
+_ATEOF
+
+
+cat >lib.h <<'_ATEOF'
+#include <exception>
+#include <string>
+
+
+#if defined(__CYGWIN__) || defined(_WIN32)
+# if defined(DLL_EXPORT) || defined(USING_LIB_DLL)
+#  if defined(LIBTOOL_TEST_IN_LIB)
+#   define LIB_IMPEXP __declspec (dllexport)
+#  else
+#   define LIB_IMPEXP __declspec (dllimport)
+#  endif
+# else
+#  define LIB_IMPEXP
+# endif
+#else
+# define LIB_IMPEXP
+#endif
+
+class LIB_IMPEXP libexc : public std::exception {
+public:
+  libexc (std::string str) : message (str) { }
+  ~libexc () throw () { }
+  virtual const char *what () const throw ()
+  {
+    return message.c_str ();
+  }
+private:
+  std::string message;
+};
+int LIB_IMPEXP libfoo () throw (libexc);
+_ATEOF
+
+
+cat >lib.cpp <<'_ATEOF'
+#include <iostream>
+#define LIBTOOL_TEST_IN_LIB
+#include "lib.h"
+
+int libbar (void) throw (libexc)
+{
+  throw libexc ("exception in library");
+}
+
+int libfoo (void) throw (libexc)
+{
+  try {
+    libbar ();
+  }
+  catch (libexc e) {
+    std::cerr << "caught inside lib: " << e.what () << '\n';
+    throw libexc ("exception from library");
+  }
+  return 0;
+}
+_ATEOF
+
+
+cat >main.cpp <<'_ATEOF'
+#include <ltdl.h>
+#include <cstdlib>
+#include <iostream>
+#include <exception>
+#include <string>
+#include "common.h"
+#include "lib.h"
+#include "module.h"
+
+class exc : public std::exception {
+public:
+  exc (std::string str) : message (str) { }
+  ~exc () throw () { }
+  virtual const char *what () const throw ()
+  {
+    return message.c_str ();
+  }
+private:
+  std::string message;
+};
+
+int foo (void) throw (exc)
+{
+  throw exc ("exception in program");
+  return 0;
+}
+
+int exceptions_in_prog (void)
+{
+  std::cerr << "exceptions_in_prog\n";
+  try {
+    foo ();
+  }
+  catch (exc e) {
+     std::cerr << "caught: " << e.what () << '\n';
+    return 0;
+  }
+  return 1;
+}
+
+int exceptions_in_lib (void)
+{
+  std::cerr << "exceptions_in_lib\n";
+  try {
+    libfoo ();
+  }
+  catch (libexc e) {
+     std::cerr << "caught: " << e.what () << '\n';
+    return 0;
+  }
+  return 1;
+}
+
+int exceptions_in_module (void)
+{
+  std::cerr << "exceptions_in_module\n";
+
+  if (lt_dlinit ())
+    {
+      std::cerr << "init error: " << lt_dlerror () << '\n';
+      return 1;
+    }
+
+  // Some systems need RTLD_GLOBAL for exceptions to work in modules.
+  lt_dladvise advise;
+  if (lt_dladvise_init (&advise) || lt_dladvise_global (&advise))
+    {
+      std::cerr << "error setting advise global\n";
+      return 1;
+    }
+
+  lt_dlhandle handle = lt_dlopenadvise ("module.la", advise);
+  if (handle == NULL)
+    {
+      std::cerr << "dlopen failed: " << lt_dlerror () << '\n';
+      return 1;
+    }
+  lt_dladvise_destroy (&advise);
+
+  typedef int (*pfun) (void);
+  pfun pf = (pfun) lt_dlsym (handle, "modfoo");
+  if (pf == NULL)
+    {
+      std::cerr << "dlsym failed: " << lt_dlerror () << '\n';
+      return 1;
+    }
+
+  bool exception_caught = false;
+  try {
+    (*pf) ();
+  }
+  catch (modexc e) {
+    std::cerr << "caught: " << e.what () << '\n';
+    exception_caught = true;
+  }
+
+  /* Only close the module after all of its objects have gone out of scope. */
+  if (exception_caught)
+  {
+    if (lt_dlclose (handle))
+      {
+        std::cerr << "dlclose failed: " << lt_dlerror () << '\n';
+	return 1;
+      }
+    if (lt_dlexit ())
+      {
+        std::cerr << "lt_dlexit failed: " << lt_dlerror () << '\n';
+	return 1;
+      }
+    return 0;
+  }
+  return 1;
+}
+
+int main (void)
+{
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (exceptions_in_prog ())
+    return 1;
+  if (exceptions_in_lib ())
+    return 1;
+  if (exceptions_in_module ())
+    return 1;
+  return 0;
+}
+_ATEOF
+
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+moddir=$inst/mod
+mkdir l m $inst $libdir $bindir $moddir
+
+# If the C++ compiler isn't capable, don't bother.
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:361: \$CXX \$CPPFLAGS \$CXXFLAGS -DUSING_COMMON_DLL -DUSING_MODULE_DLL -DUSING_LIB_DLL -c main.cpp || exit 77"
+at_fn_check_prepare_dynamic "$CXX $CPPFLAGS $CXXFLAGS -DUSING_COMMON_DLL -DUSING_MODULE_DLL -DUSING_LIB_DLL -c main.cpp || exit 77" "exceptions.at:361"
+( $at_check_trace; $CXX $CPPFLAGS $CXXFLAGS -DUSING_COMMON_DLL -DUSING_MODULE_DLL -DUSING_LIB_DLL -c main.cpp || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:361"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:363: \$LIBTOOL --mode=compile --tag=CXX \$CXX \$CPPFLAGS \$CXXFLAGS -c common.cpp"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CXX $CXX $CPPFLAGS $CXXFLAGS -c common.cpp" "exceptions.at:363"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CXX $CXX $CPPFLAGS $CXXFLAGS -c common.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:363"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:365: \$LIBTOOL --mode=compile --tag=CXX \$CXX \$CPPFLAGS \$CXXFLAGS -c lib.cpp"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CXX $CXX $CPPFLAGS $CXXFLAGS -c lib.cpp" "exceptions.at:365"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CXX $CXX $CPPFLAGS $CXXFLAGS -c lib.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:365"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:367: \$LIBTOOL --mode=compile --tag=CXX \$CXX \$CPPFLAGS \$CXXFLAGS -DUSING_COMMON_DLL -c module.cpp"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CXX $CXX $CPPFLAGS $CXXFLAGS -DUSING_COMMON_DLL -c module.cpp" "exceptions.at:367"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CXX $CXX $CPPFLAGS $CXXFLAGS -DUSING_COMMON_DLL -c module.cpp
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:367"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:370: \$LIBTOOL --mode=link --tag=CXX \$CXX \$CXXFLAGS \$LDFLAGS -o l/libcommon.la 	 common.lo -no-undefined -version-info 1:0:0 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o l/libcommon.la 	 common.lo -no-undefined -version-info 1:0:0 -rpath $libdir" "exceptions.at:370"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o l/libcommon.la 	 common.lo -no-undefined -version-info 1:0:0 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:370"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:373: \$LIBTOOL --mode=link --tag=CXX \$CXX \$CXXFLAGS \$LDFLAGS -o l/liba.la 	 lib.lo -no-undefined -version-info 1:0:0 -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o l/liba.la 	 lib.lo -no-undefined -version-info 1:0:0 -rpath $libdir" "exceptions.at:373"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o l/liba.la 	 lib.lo -no-undefined -version-info 1:0:0 -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:373"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:376: \$LIBTOOL --mode=link --tag=CXX \$CXX \$CXXFLAGS \$LDFLAGS -o m/module.la 	 module.lo l/libcommon.la -module -avoid-version -no-undefined -rpath \$moddir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o m/module.la 	 module.lo l/libcommon.la -module -avoid-version -no-undefined -rpath $moddir" "exceptions.at:376"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o m/module.la 	 module.lo l/libcommon.la -module -avoid-version -no-undefined -rpath $moddir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:376"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# We need -export-dynamic for the exception handling in modules to work.
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:381: \$LIBTOOL --mode=link --tag=CXX \$CXX \$CXXFLAGS \$LDFLAGS -o main\$EXEEXT 	 main.\$OBJEXT l/liba.la l/libcommon.la -dlopen m/module.la \$LIBLTDL -export-dynamic"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o main$EXEEXT 	 main.$OBJEXT l/liba.la l/libcommon.la -dlopen m/module.la $LIBLTDL -export-dynamic" "exceptions.at:381"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CXX $CXX $CXXFLAGS $LDFLAGS -o main$EXEEXT 	 main.$OBJEXT l/liba.la l/libcommon.la -dlopen m/module.la $LIBLTDL -export-dynamic
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:381"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:385: if \$LIBTOOL --mode=execute -dlopen m/module.la \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=execute -dlopen m/module.la \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "exceptions.at:385"
+( $at_check_trace; if $LIBTOOL --mode=execute -dlopen m/module.la "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:385"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:387: \$LIBTOOL --mode=install cp l/libcommon.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp l/libcommon.la $libdir" "exceptions.at:387"
+( $at_check_trace; $LIBTOOL --mode=install cp l/libcommon.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:387"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:389: \$LIBTOOL --mode=install cp l/liba.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp l/liba.la $libdir" "exceptions.at:389"
+( $at_check_trace; $LIBTOOL --mode=install cp l/liba.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:389"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:391: \$LIBTOOL --mode=install cp m/module.la \$moddir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp m/module.la $moddir" "exceptions.at:391"
+( $at_check_trace; $LIBTOOL --mode=install cp m/module.la $moddir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:391"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:393: \$LIBTOOL --mode=install cp main\$EXEEXT \$bindir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp main$EXEEXT $bindir" "exceptions.at:393"
+( $at_check_trace; $LIBTOOL --mode=install cp main$EXEEXT $bindir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:393"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+rm -rf l m main$EXEEXT
+
+LTDL_LIBRARY_PATH=$moddir
+export LTDL_LIBRARY_PATH
+lt_exe=$bindir/main; if test -f "$bindir/main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/exceptions.at:399: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "exceptions.at:399"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/exceptions.at:399"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_104
+#AT_START_105
+at_fn_group_banner 105 'early-libtool.at:32' \
+  "config.status" "                                  " 14
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "105. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtool-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.in <<'_ATEOF'
+prefix = @prefix@
+libdir = @libdir@
+top_builddir = .
+SHELL = @SHELL@
+DEFAULT_INCLUDES = -I. -I@srcdir@
+EXEEXT = @EXEEXT@
+LIBTOOL = @LIBTOOL@
+OBJEXT = @OBJEXT@
+
+CPPFLAGS = @CPPFLAGS@
+CFLAGS = @CFLAGS@
+LDFLAGS = @LDFLAGS@
+
+COMPILE = $(CC) $(CPPFLAGS) $(CFLAGS) $(DEFAULT_INCLUDES)
+LTCOMPILE = $(LIBTOOL) --mode=compile --tag=CC $(CC) $(CPPFLAGS) $(CFLAGS) $(DEFAULT_INCLUDES)
+LINK = $(LIBTOOL) --mode=link --tag=CC $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+
+all: hell$(EXEEXT)
+
+libhello.la: hello.lo
+	$(LINK) -rpath $(libdir) hello.lo
+hell$(EXEEXT): main.$(OBJEXT) libhello.la
+	$(LINK) main.$(OBJEXT) libhello.la
+
+.SUFFIXES:
+.SUFFIXES: .c .$(OBJEXT) .lo
+
+.c.$(OBJEXT):
+	$(COMPILE) -c $<
+.c.lo:
+	$(LTCOMPILE) -c -o $@ $<
+_ATEOF
+
+
+cat >hello.c <<'_ATEOF'
+#include <stdio.h>
+
+void
+hello (void)
+{
+  printf ("** This is not GNU Hello.  There is no built-in mail reader. **\n");
+}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+#include <stdio.h>
+
+extern void hello (void);
+
+int
+main (void)
+{
+  printf ("Welcome to GNU Hell!\n");
+
+  hello ();
+
+  return 0;
+}
+_ATEOF
+
+
+cat > missing <<_EOF
+#! /bin/sh
+exit 0
+_EOF
+chmod a+x missing
+
+$LIBTOOLIZE --copy --verbose --install
+
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:109: \$ACLOCAL -I m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I m4" "early-libtool.at:109"
+( $at_check_trace; $ACLOCAL -I m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:109"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:110: \$AUTOCONF --force"
+at_fn_check_prepare_dynamic "$AUTOCONF --force" "early-libtool.at:110"
+( $at_check_trace; $AUTOCONF --force
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:110"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:111: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "early-libtool.at:111"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:111"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/early-libtool.at:112: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "early-libtool.at:112"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:112"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+lt_exe=./hell; if test -f "./hell$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:114: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "early-libtool.at:114"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:114"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:115: grep 'Welcome to GNU Hell' stdout"
+at_fn_check_prepare_trace "early-libtool.at:115"
+( $at_check_trace; grep 'Welcome to GNU Hell' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:115"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:116: grep 'This is not GNU Hello.' stdout"
+at_fn_check_prepare_trace "early-libtool.at:116"
+( $at_check_trace; grep 'This is not GNU Hello.' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:116"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_105
+#AT_START_106
+at_fn_group_banner 106 'early-libtool.at:126' \
+  "config.lt" "                                      " 14
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "106. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([libtool-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_MACRO_DIR([m4])
+LT_INIT
+LT_OUTPUT
+
+cat >hello.c <<\_EOF
+#include <stdio.h>
+
+void
+hello (void)
+{
+  printf ("** This is not GNU Hello.  There is no built-in mail reader. **\n");
+}
+_EOF
+
+# Prove that we can run libtool from inside configure:
+$SHELL ./libtool --mode=compile --tag=CC $CC $CPPFLAGS $CFLAGS \
+    -I. -I$srcdir -c -o hello.lo hello.c  || exit 1
+$SHELL ./libtool --mode=link --tag=CC $CC $CFLAGS $LDFLAGS \
+    -o libhello.la -rpath /notexist hello.lo || exit 1
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.in <<'_ATEOF'
+prefix = @prefix@
+libdir = @libdir@
+top_builddir = .
+SHELL = @SHELL@
+DEFAULT_INCLUDES = -I. -I@srcdir@
+EXEEXT = @EXEEXT@
+LIBTOOL = @LIBTOOL@
+OBJEXT = @OBJEXT@
+
+CPPFLAGS = @CPPFLAGS@
+CFLAGS = @CFLAGS@
+LDFLAGS = @LDFLAGS@
+
+COMPILE = $(CC) $(CPPFLAGS) $(CFLAGS) $(DEFAULT_INCLUDES)
+LINK = $(LIBTOOL) --mode=link --tag=CC $(CC) $(CFLAGS) $(LDFLAGS) -o $@
+
+all: hell$(EXEEXT)
+
+hell$(EXEEXT): main.$(OBJEXT) libhello.la
+	$(LINK) main.$(OBJEXT) libhello.la
+
+.SUFFIXES:
+.SUFFIXES: .c .$(OBJEXT)
+
+.c.$(OBJEXT):
+	$(COMPILE) -c $<
+_ATEOF
+
+
+cat >hello.c <<'_ATEOF'
+#include <stdio.h>
+
+void
+hello (void)
+{
+  printf ("** This is not GNU Hello.  There is no built-in mail reader. **\n");
+}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+#include <stdio.h>
+
+extern void hello (void);
+
+int
+main (int argc, char *argv[])
+{
+  printf ("Welcome to GNU Hell!\n");
+
+  hello ();
+
+  return 0;
+}
+_ATEOF
+
+
+cat > missing <<_EOF
+#! /bin/sh
+exit 0
+_EOF
+chmod a+x missing
+
+$LIBTOOLIZE --copy --verbose --install
+
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:216: \$ACLOCAL -I m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I m4" "early-libtool.at:216"
+( $at_check_trace; $ACLOCAL -I m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:216"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:217: \$AUTOCONF --force"
+at_fn_check_prepare_dynamic "$AUTOCONF --force" "early-libtool.at:217"
+( $at_check_trace; $AUTOCONF --force
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:217"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:218: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "early-libtool.at:218"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:218"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/early-libtool.at:219: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "early-libtool.at:219"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:219"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+lt_exe=./hell; if test -f "./hell$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:221: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "early-libtool.at:221"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:221"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:222: grep 'Welcome to GNU Hell' stdout"
+at_fn_check_prepare_trace "early-libtool.at:222"
+( $at_check_trace; grep 'Welcome to GNU Hell' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:222"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:223: grep 'This is not GNU Hello.' stdout"
+at_fn_check_prepare_trace "early-libtool.at:223"
+( $at_check_trace; grep 'This is not GNU Hello.' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:223"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Make sure config.status --recheck updates the libtool script
+rm libtool
+{ set +x
+$as_echo "$at_srcdir/early-libtool.at:227: \$SHELL ./config.status --recheck"
+at_fn_check_prepare_dynamic "$SHELL ./config.status --recheck" "early-libtool.at:227"
+( $at_check_trace; $SHELL ./config.status --recheck
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/early-libtool.at:227"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_106
+#AT_START_107
+at_fn_group_banner 107 'with-pic.at:24' \
+  "test --with-pic" "                                " 14
+at_xfail=no
+(
+  $as_echo "107. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+eval `$LIBTOOL --config | $EGREP '^(pic_flag|FGREP)='`
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:27: test \"z\$pic_flag\" != \"z\" || exit 77"
+at_fn_check_prepare_dynamic "test \"z$pic_flag\" != \"z\" || exit 77" "with-pic.at:27"
+( $at_check_trace; test "z$pic_flag" != "z" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:27"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:28: test \"\$at_srcdir\" != . || exit 77"
+at_fn_check_prepare_dynamic "test \"$at_srcdir\" != . || exit 77" "with-pic.at:28"
+( $at_check_trace; test "$at_srcdir" != . || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:28"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CONFIGURE=$abs_top_srcdir/tests/demo/configure
+: ${MAKE=make}
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:33: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL \$CONFIGURE \$configure_options --disable-shared --with-pic=no"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "with-pic.at:33"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL $CONFIGURE $configure_options --disable-shared --with-pic=no
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:33"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:34: \$MAKE"
+at_fn_check_prepare_dynamic "$MAKE" "with-pic.at:34"
+( $at_check_trace; $MAKE
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:34"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:35: \$FGREP -v \"\$pic_flag\" stdout"
+at_fn_check_prepare_dynamic "$FGREP -v \"$pic_flag\" stdout" "with-pic.at:35"
+( $at_check_trace; $FGREP -v "$pic_flag" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:35"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$MAKE clean
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:38: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL \$CONFIGURE \$configure_options --disable-shared --with-pic=yes"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "with-pic.at:38"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL $CONFIGURE $configure_options --disable-shared --with-pic=yes
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:38"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:39: \$MAKE"
+at_fn_check_prepare_dynamic "$MAKE" "with-pic.at:39"
+( $at_check_trace; $MAKE
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:39"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:40: \$FGREP \"\$pic_flag\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \"$pic_flag\" stdout" "with-pic.at:40"
+( $at_check_trace; $FGREP "$pic_flag" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:40"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$MAKE clean
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:43: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL \$CONFIGURE \$configure_options --disable-shared --with-pic=\"demo,foo,bar\""
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "with-pic.at:43"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL $CONFIGURE $configure_options --disable-shared --with-pic="demo,foo,bar"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:43"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:44: \$MAKE"
+at_fn_check_prepare_dynamic "$MAKE" "with-pic.at:44"
+( $at_check_trace; $MAKE
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:44"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:45: \$FGREP \"\$pic_flag\" stdout"
+at_fn_check_prepare_dynamic "$FGREP \"$pic_flag\" stdout" "with-pic.at:45"
+( $at_check_trace; $FGREP "$pic_flag" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:45"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$MAKE clean
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:48: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL \$CONFIGURE \$configure_options --disable-shared --with-pic=\"foo,bar\""
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "with-pic.at:48"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL $CONFIGURE $configure_options --disable-shared --with-pic="foo,bar"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:48"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:49: \$MAKE"
+at_fn_check_prepare_dynamic "$MAKE" "with-pic.at:49"
+( $at_check_trace; $MAKE
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:49"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/with-pic.at:50: \$FGREP -v \"\$pic_flag\" stdout"
+at_fn_check_prepare_dynamic "$FGREP -v \"$pic_flag\" stdout" "with-pic.at:50"
+( $at_check_trace; $FGREP -v "$pic_flag" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/with-pic.at:50"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+$MAKE clean
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_107
+#AT_START_108
+at_fn_group_banner 108 'no-executables.at:25' \
+  "AC_NO_EXECUTABLES" "                              " 15
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "108. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+mkdir m4
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([no-exec], [1])
+AC_CONFIG_MACRO_DIR([m4])
+
+# We punt a bit here, to get the results of AC_PROG_CC
+# (and allow it to do link tests) but still error out on
+# link tests within Libtool macros.
+LDFLAGS=-lnosuchlibrary
+AC_NO_EXECUTABLES
+AC_PROG_CC
+AC_PROG_CXX
+AC_PROG_F77
+AC_PROG_FC
+AM_PROG_GCJ
+
+# Consequently, we have to set cache variables for each link
+# test we may need.  For the purposes of this test, it shouldn't
+# matter much whether these values are actually wrong, the point
+# is that the linker should never be invoked.
+
+lt_cv_shlibpath_overrides_runpath=no
+lt_cv_archive_cmds_need_lc=no
+lt_cv_cc_needs_belf=no
+lt_cv_ld_exported_symbols_list=no
+lt_cv_prog_compiler_static_works=no
+lt_cv_aix_libpath="/usr/lib:/lib"
+lt_cv_irix_exported_symbol=yes
+
+# Deal with AC_LIBTOOL_DLOPEN in one of two possible ways:
+# - do not execute it at all in the ac_no_link case
+# - preset the individual Autoconf test variables
+
+if ${test_ac_libtool_dlopen-false}; then
+    ac_cv_func_shl_load=no
+    ac_cv_lib_dld_shl_load=no
+    ac_cv_func_dlopen=no
+    ac_cv_lib_dl_dlopen=no
+    ac_cv_lib_svld_dlopen=no
+    ac_cv_lib_dld_dld_link=no
+  AC_LIBTOOL_DLOPEN
+fi
+AC_PROG_LIBTOOL
+
+AC_OUTPUT
+_ATEOF
+
+
+$LIBTOOLIZE --install
+
+
+{ set +x
+$as_echo "$at_srcdir/no-executables.at:75: \$ACLOCAL -I m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I m4" "no-executables.at:75"
+( $at_check_trace; $ACLOCAL -I m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/no-executables.at:75"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/no-executables.at:75: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "no-executables.at:75"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/no-executables.at:75"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/no-executables.at:76: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "no-executables.at:76"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/no-executables.at:76"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/no-executables.at:77: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options test_ac_libtool_dlopen=:"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "no-executables.at:77"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options test_ac_libtool_dlopen=:
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/no-executables.at:77"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_108
+#AT_START_109
+at_fn_group_banner 109 'deplibs-ident.at:32' \
+  "build tree relpaths" "                            " 16
+at_xfail=no
+      case $host in
+                 *-*-aix*|hppa*-*-hpux*|*-*-interix*|*-*-openbsd*) false;;
+                 *):;;
+               esac && at_xfail=yes
+(
+  $as_echo "109. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+mkdir a a/b c
+echo 'int c() { return 0; }' > c/libcee.c
+{ set +x
+$as_echo "$at_srcdir/deplibs-ident.at:37: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c c/libcee.c -o c/libcee.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c c/libcee.c -o c/libcee.lo" "deplibs-ident.at:37"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c c/libcee.c -o c/libcee.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-ident.at:37"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/deplibs-ident.at:39: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o c/libcee.la c/libcee.lo -rpath /nowhere"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o c/libcee.la c/libcee.lo -rpath /nowhere" "deplibs-ident.at:39"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o c/libcee.la c/libcee.lo -rpath /nowhere
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-ident.at:39"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+depl_1=../c/libcee.la
+depl_2=`pwd`/c/libcee.la
+depl_3="-L../c -lcee"
+
+(
+  cd a
+  for i in 1 2 3; do
+    eval depend_on_c=\"\$depl_$i\"
+    echo "extern int c(void); int a$i() { return c(); }" > liba$i.c
+    { set +x
+$as_echo "$at_srcdir/deplibs-ident.at:51: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c liba\$i.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba$i.c" "deplibs-ident.at:51"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c liba$i.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-ident.at:51"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    { set +x
+$as_echo "$at_srcdir/deplibs-ident.at:53: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba\$i.la liba\$i.lo \$depend_on_c -rpath /nowhere"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la liba$i.lo $depend_on_c -rpath /nowhere" "deplibs-ident.at:53"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba$i.la liba$i.lo $depend_on_c -rpath /nowhere
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-ident.at:53"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  done
+)
+
+cat >a/b/b.c <<'_ATEOF'
+extern int a1(void), a2(void), a3(void), c(void);
+int main() { return a1() + a2() + a3() + c(); }
+_ATEOF
+
+
+(
+  cd a/b
+  { set +x
+$as_echo "$at_srcdir/deplibs-ident.at:65: \$CC \$CFLAGS -c b.c"
+at_fn_check_prepare_dynamic "$CC $CFLAGS -c b.c" "deplibs-ident.at:65"
+( $at_check_trace; $CC $CFLAGS -c b.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-ident.at:65"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/deplibs-ident.at:66: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o b\$EXEEXT b.\$OBJEXT ../liba1.la ../liba2.la ../liba3.la ../../c/libcee.la -rpath /nowhere"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o b$EXEEXT b.$OBJEXT ../liba1.la ../liba2.la ../liba3.la ../../c/libcee.la -rpath /nowhere" "deplibs-ident.at:66"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o b$EXEEXT b.$OBJEXT ../liba1.la ../liba2.la ../liba3.la ../../c/libcee.la -rpath /nowhere
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-ident.at:66"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/deplibs-ident.at:68: \$EGREP 'cee.*cee' stdout"
+at_fn_check_prepare_dynamic "$EGREP 'cee.*cee' stdout" "deplibs-ident.at:68"
+( $at_check_trace; $EGREP 'cee.*cee' stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/deplibs-ident.at:68"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  )
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_109
+#AT_START_110
+at_fn_group_banner 110 'configure-iface.at:102' \
+  "installable libltdl" "                            " 17
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOHEADER" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "110. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+
+typedef int funcp (void);
+
+static int errors = 0;
+
+int
+main (void)
+{
+  lt_dlhandle handle;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (lt_dlinit () != 0)
+    {
+      fprintf (stderr, "error during initialization: %s\n", lt_dlerror ());
+      return 1;
+    }
+
+  handle = lt_dlopenext ("libmodule");
+  if (!handle)
+    {
+      fprintf (stderr, "can't open libmodule: %s\n", lt_dlerror ());
+      ++errors;
+    }
+
+  {
+    funcp *f = (funcp *) lt_dlsym (handle, "f");
+
+    if (f)
+      {
+        printf ("%d\n", f ());
+      }
+    else
+      {
+        fprintf (stderr, "function `f' not found: %s\n", lt_dlerror ());
+        ++errors;
+      }
+  }
+
+  if (lt_dlexit () != 0)
+    {
+      fprintf (stderr, "error during exit: %s\n", lt_dlerror ());
+      ++errors;
+    }
+
+  return (errors != 0);
+}
+_ATEOF
+
+
+cat >libmodule.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f (void) { return 5150; }
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+5150
+_ATEOF
+
+case $host_os in mingw*)
+  while read -r l; do printf "%s\r\n" "$l"; done < expout > expout.t
+  mv -f expout.t expout ;;
+esac
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([installable-ltdl-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([libltdl/config])
+AC_CONFIG_MACRO_DIR([libltdl/m4])
+AC_CONFIG_HEADERS([config.h:config.hin])
+LT_CONFIG_LTDL_DIR([libltdl])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT([dlopen])
+LTDL_INIT([installable])
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+AUTOMAKE_OPTIONS	= 1.7
+
+SUBDIRS			= libltdl
+
+AM_CPPFLAGS		= $(LTDLINCL)
+
+lib_LTLIBRARIES		= libmodule.la
+# Automake < 1.8 will use libmodule.la.c as default source,
+# while newer will choose libmodule.c; so specify it here.
+libmodule_la_SOURCES	= libmodule.c
+libmodule_la_LDFLAGS	= -module
+
+bin_PROGRAMS		= main
+main_LDFLAGS		= -dlopen libmodule.la
+main_LDADD		= $(LIBLTDL)
+main_DEPENDENCIES	= $(LTDLDEPS) libmodule.la
+_ATEOF
+
+
+# Install everything!
+prefix=`pwd`/_inst
+
+$LIBTOOLIZE --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:144: \$ACLOCAL -I libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I libltdl/m4" "configure-iface.at:144"
+( $at_check_trace; $ACLOCAL -I libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:144"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:144: \$AUTOHEADER "
+at_fn_check_prepare_dynamic "$AUTOHEADER " "configure-iface.at:144"
+( $at_check_trace; $AUTOHEADER
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:144"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:144: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "configure-iface.at:144"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:144"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/configure-iface.at:144: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "configure-iface.at:144"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/configure-iface.at:144"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:144: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "configure-iface.at:144"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:144"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:144: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options --with-included-ltdl --prefix=\$prefix"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "configure-iface.at:144"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options --with-included-ltdl --prefix=$prefix
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:144"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all install
+do
+  { set +x
+$as_echo "$at_srcdir/configure-iface.at:144: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "configure-iface.at:144"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:144"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+# TODO: Check that the installed program `main' is linked against our libltdl
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:148: test -f \$prefix/lib/libltdl.la"
+at_fn_check_prepare_dynamic "test -f $prefix/lib/libltdl.la" "configure-iface.at:148"
+( $at_check_trace; test -f $prefix/lib/libltdl.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:148"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:149: test -f \$prefix/include/ltdl.h"
+at_fn_check_prepare_dynamic "test -f $prefix/include/ltdl.h" "configure-iface.at:149"
+( $at_check_trace; test -f $prefix/include/ltdl.h
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:149"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Check that main is rebuilt if libltdl.la is newer
+rm -f libltdl/libltdl.la
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:153: \$MAKE -q main\$EXEEXT || exit 1"
+at_fn_check_prepare_dynamic "$MAKE -q main$EXEEXT || exit 1" "configure-iface.at:153"
+( $at_check_trace; $MAKE -q main$EXEEXT || exit 1
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/configure-iface.at:153"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_110
+#AT_START_111
+at_fn_group_banner 111 'configure-iface.at:162' \
+  "--with-ltdl-include/lib" "                        " 17
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOHEADER" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "111. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+# Install libltdl
+prefix=`pwd`/_inst
+
+$LIBTOOLIZE --copy --ltdl=ltdl
+
+
+
+(cd ltdl
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:171: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options --enable-ltdl-install --prefix=\$prefix"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "configure-iface.at:171"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options --enable-ltdl-install --prefix=$prefix
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:171"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all install
+do
+  { set +x
+$as_echo "$at_srcdir/configure-iface.at:172: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "configure-iface.at:172"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:172"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+)
+
+# Remove build files
+rm -rf ltdl/
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:178: test -f \$prefix/lib/libltdl.la"
+at_fn_check_prepare_dynamic "test -f $prefix/lib/libltdl.la" "configure-iface.at:178"
+( $at_check_trace; test -f $prefix/lib/libltdl.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:178"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:179: test -f \$prefix/include/ltdl.h"
+at_fn_check_prepare_dynamic "test -f $prefix/include/ltdl.h" "configure-iface.at:179"
+( $at_check_trace; test -f $prefix/include/ltdl.h
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:179"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+
+typedef int funcp (void);
+
+static int errors = 0;
+
+int
+main (void)
+{
+  lt_dlhandle handle;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (lt_dlinit () != 0)
+    {
+      fprintf (stderr, "error during initialization: %s\n", lt_dlerror ());
+      return 1;
+    }
+
+  handle = lt_dlopenext ("libmodule");
+  if (!handle)
+    {
+      fprintf (stderr, "can't open libmodule: %s\n", lt_dlerror ());
+      ++errors;
+    }
+
+  {
+    funcp *f = (funcp *) lt_dlsym (handle, "f");
+
+    if (f)
+      {
+        printf ("%d\n", f ());
+      }
+    else
+      {
+        fprintf (stderr, "function `f' not found: %s\n", lt_dlerror ());
+        ++errors;
+      }
+  }
+
+  if (lt_dlexit () != 0)
+    {
+      fprintf (stderr, "error during exit: %s\n", lt_dlerror ());
+      ++errors;
+    }
+
+  return (errors != 0);
+}
+_ATEOF
+
+
+cat >libmodule.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f (void) { return 5150; }
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+5150
+_ATEOF
+
+case $host_os in mingw*)
+  while read -r l; do printf "%s\r\n" "$l"; done < expout > expout.t
+  mv -f expout.t expout ;;
+esac
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([configure-iface-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_MACRO_DIR([_inst/aclocal])
+AC_CONFIG_HEADERS([config.h:config.hin])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT([dlopen])
+LTDL_INIT
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+AUTOMAKE_OPTIONS	= 1.7
+
+AM_CPPFLAGS		= $(LTDLINCL)
+
+lib_LTLIBRARIES		= libmodule.la
+# Automake < 1.8 will use libmodule.la.c as default source,
+# while newer will choose libmodule.c; so specify it here.
+libmodule_la_SOURCES	= libmodule.c
+libmodule_la_LDFLAGS	= -module
+
+bin_PROGRAMS		= main
+main_LDFLAGS		= -dlopen libmodule.la
+main_LDADD		= $(LIBLTDL)
+main_DEPENDENCIES	= $(LTDLDEPS) libmodule.la
+_ATEOF
+
+
+## Try to avoid linking against a previously installed libltdl found
+## with an explicit -L/path.
+save_LDFLAGS=$LDFLAGS
+LDFLAGS=
+for l in $save_LDFLAGS
+do
+  case $l in
+  -L*) ;;
+  *) LDFLAGS="$LDFLAGS $l" ;;
+  esac
+done
+
+# We don't use 'libtoolize --ltdl', so that we get an error if the test
+# tries to build and link against its own ltdl sources:
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:227: \$ACLOCAL -I _inst/aclocal"
+at_fn_check_prepare_dynamic "$ACLOCAL -I _inst/aclocal" "configure-iface.at:227"
+( $at_check_trace; $ACLOCAL -I _inst/aclocal
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:227"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:227: \$AUTOHEADER "
+at_fn_check_prepare_dynamic "$AUTOHEADER " "configure-iface.at:227"
+( $at_check_trace; $AUTOHEADER
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:227"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:227: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "configure-iface.at:227"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:227"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/configure-iface.at:227: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "configure-iface.at:227"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/configure-iface.at:227"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:227: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "configure-iface.at:227"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:227"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:227: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options --with-ltdl-lib=\$prefix/lib --with-ltdl-include=\$prefix/include"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "configure-iface.at:227"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options --with-ltdl-lib=$prefix/lib --with-ltdl-include=$prefix/include
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:227"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/configure-iface.at:227: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "configure-iface.at:227"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:227"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+## TODO: portable ldd check for correct libltdl
+## Currently, this test doesn't fail if `main' ends up linking against a
+## previously installed system libltdl.
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:234: if \$LIBTOOL --mode=execute -dlopen libmodule.la \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=execute -dlopen libmodule.la \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "configure-iface.at:234"
+( $at_check_trace; if $LIBTOOL --mode=execute -dlopen libmodule.la "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:234"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_111
+#AT_START_112
+at_fn_group_banner 112 'configure-iface.at:243' \
+  "--with-included-ltdl" "                           " 17
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOHEADER" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "112. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cat >main.c <<'_ATEOF'
+#include <ltdl.h>
+#include <stdio.h>
+
+typedef int funcp (void);
+
+static int errors = 0;
+
+int
+main (void)
+{
+  lt_dlhandle handle;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+
+  if (lt_dlinit () != 0)
+    {
+      fprintf (stderr, "error during initialization: %s\n", lt_dlerror ());
+      return 1;
+    }
+
+  handle = lt_dlopenext ("libmodule");
+  if (!handle)
+    {
+      fprintf (stderr, "can't open libmodule: %s\n", lt_dlerror ());
+      ++errors;
+    }
+
+  {
+    funcp *f = (funcp *) lt_dlsym (handle, "f");
+
+    if (f)
+      {
+        printf ("%d\n", f ());
+      }
+    else
+      {
+        fprintf (stderr, "function `f' not found: %s\n", lt_dlerror ());
+        ++errors;
+      }
+  }
+
+  if (lt_dlexit () != 0)
+    {
+      fprintf (stderr, "error during exit: %s\n", lt_dlerror ());
+      ++errors;
+    }
+
+  return (errors != 0);
+}
+_ATEOF
+
+
+cat >libmodule.c <<'_ATEOF'
+#ifdef __cplusplus
+extern "C" {
+#endif
+int f (void) { return 5150; }
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >expout <<'_ATEOF'
+5150
+_ATEOF
+
+case $host_os in mingw*)
+  while read -r l; do printf "%s\r\n" "$l"; done < expout > expout.t
+  mv -f expout.t expout ;;
+esac
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([configure-iface-demo], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_AUX_DIR([libltdl/config])
+AC_CONFIG_MACRO_DIR([libltdl/m4])
+AC_CONFIG_HEADERS([config.h:config.hin])
+LT_CONFIG_LTDL_DIR([libltdl])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AM_PROG_CC_C_O
+LT_INIT([dlopen])
+LTDL_INIT
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+AUTOMAKE_OPTIONS	= 1.7
+
+SUBDIRS			= libltdl
+
+AM_CPPFLAGS		= $(LTDLINCL)
+
+lib_LTLIBRARIES		= libmodule.la
+# Automake < 1.8 will use libmodule.la.c as default source,
+# while newer will choose libmodule.c; so specify it here.
+libmodule_la_SOURCES	= libmodule.c
+libmodule_la_LDFLAGS	= -module
+
+bin_PROGRAMS		= main
+main_LDFLAGS		= -dlopen libmodule.la
+main_LDADD		= $(LIBLTDL)
+main_DEPENDENCIES	= $(LTDLDEPS) libmodule.la
+_ATEOF
+
+
+$LIBTOOLIZE --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:282: \$ACLOCAL -I libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I libltdl/m4" "configure-iface.at:282"
+( $at_check_trace; $ACLOCAL -I libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:282"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:282: \$AUTOHEADER "
+at_fn_check_prepare_dynamic "$AUTOHEADER " "configure-iface.at:282"
+( $at_check_trace; $AUTOHEADER
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:282"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:282: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "configure-iface.at:282"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:282"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/configure-iface.at:282: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "configure-iface.at:282"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/configure-iface.at:282"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:282: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "configure-iface.at:282"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:282"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:282: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options --with-included-ltdl"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "configure-iface.at:282"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options --with-included-ltdl
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:282"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/configure-iface.at:282: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "configure-iface.at:282"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:282"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+# --with-included-ltdl should build a convenience lib by default
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:286: test -f libltdl/libltdlc.la"
+at_fn_check_prepare_trace "configure-iface.at:286"
+( $at_check_trace; test -f libltdl/libltdlc.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:286"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+## TODO: portable ldd check for correct libltdl
+## Currently, this test doesn't fail if `main' ends up linking against a
+## previously installed system libltdl.
+lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:291: if \$LIBTOOL --mode=execute -dlopen libmodule.la \"\$lt_exe\" ; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if $LIBTOOL --mode=execute -dlopen libmodule.la \"$lt_exe\" ; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "configure-iface.at:291"
+( $at_check_trace; if $LIBTOOL --mode=execute -dlopen libmodule.la "$lt_exe" ; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:291"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+# Check that main is rebuilt if libltdlc.la is newer
+rm -f libltdl/libltdlc.la
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:295: \$MAKE -q main\$EXEEXT || exit 1"
+at_fn_check_prepare_dynamic "$MAKE -q main$EXEEXT || exit 1" "configure-iface.at:295"
+( $at_check_trace; $MAKE -q main$EXEEXT || exit 1
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/configure-iface.at:295"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_112
+#AT_START_113
+at_fn_group_banner 113 'configure-iface.at:304' \
+  "convenience libltdl" "                            " 17
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "113. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT
+AC_CONFIG_AUX_DIR([libltdl/config])
+AC_LIBLTDL_CONVENIENCE
+AC_LIBTOOL_DLOPEN
+AC_PROG_LIBTOOL
+AC_CONFIG_FILES(Makefile)
+AC_OUTPUT
+_ATEOF
+
+cat >Makefile.in <<'_ATEOF'
+LIBLTDL = @LIBLTDL@
+print-ltdl:
+	echo $(LIBLTDL)
+_ATEOF
+
+
+$LIBTOOLIZE --ltdl
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:321: \$ACLOCAL -I libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I libltdl/m4" "configure-iface.at:321"
+( $at_check_trace; $ACLOCAL -I libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:321"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:321: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "configure-iface.at:321"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:321"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:321: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "configure-iface.at:321"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:321"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:322: \$MAKE print-ltdl"
+at_fn_check_prepare_dynamic "$MAKE print-ltdl" "configure-iface.at:322"
+( $at_check_trace; $MAKE print-ltdl
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:322"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/configure-iface.at:323: grep libltdl/libltdlc.la stdout"
+at_fn_check_prepare_trace "configure-iface.at:323"
+( $at_check_trace; grep libltdl/libltdlc.la stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/configure-iface.at:323"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_113
+#AT_START_114
+at_fn_group_banner 114 'stresstest.at:31' \
+  "Link option thorough search test" "               " 18
+at_xfail=no
+(
+  $as_echo "114. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+eval `$LIBTOOL --config | $EGREP '^(CC|objdir|allow_undefined_flag)='`
+
+mkdir sub sub2 sub3 2>/dev/null
+
+cat >a.c <<'_ATEOF'
+/* all kinds of data items */
+#ifdef __cplusplus
+extern "C" {
+#endif
+int v1;
+static int v2;
+int v3 = 0;
+int v4 = 1;
+extern const int v5, v6;
+extern const char *v7;
+extern const char v8[];
+extern int (*const v12) (void);
+const int v5 = 0;
+const int v6 = 1;
+const char* v7 = "\01foo";
+const char v8[] = "\01bar";
+int v9(void) { return v2 + 1; }
+int (*v10) (void);
+int (*v11) (void) = v9;
+int (*const v12) (void) = v9;
+
+typedef struct { int arr[1000]; } large;
+large v13;
+large v14 = { { 0 } };
+large v15 = { { 1 } };
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >asyms <<'_ATEOF'
+v1
+v3
+v4
+v5
+v6
+v7
+v8
+v9
+v10
+v11
+v12
+v13
+v14
+v15
+_ATEOF
+
+
+cat >b.c <<'_ATEOF'
+int b = 42;
+int b3 = 1;
+int ab = 1;
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+
+#if defined(LIBA_DLL_IMPORT)
+#  if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__)
+#    define LIBA_SCOPE extern __declspec(dllimport)
+#    if defined(_MSC_VER)
+#      define LIBA_SCOPE_VAR LIBA_SCOPE
+#    endif
+#  endif
+#endif
+#if !defined(LIBA_SCOPE)
+#  define LIBA_SCOPE extern
+#endif
+#if !defined(LIBA_SCOPE_VAR)
+#  define LIBA_SCOPE_VAR extern
+#endif
+#ifdef __cplusplus
+extern "C" {
+#endif
+LIBA_SCOPE_VAR int v1;
+LIBA_SCOPE_VAR int v3, v4;
+LIBA_SCOPE const int v5, v6;
+LIBA_SCOPE_VAR const char* v7;
+LIBA_SCOPE_VAR const char v8[];
+extern int v9(void);
+LIBA_SCOPE_VAR int (*v10) (void);
+LIBA_SCOPE_VAR int (*v11) (void);
+LIBA_SCOPE int (*const v12) (void);
+#ifdef __cplusplus
+}
+#endif
+
+typedef struct { int arr[1000]; } large;
+LIBA_SCOPE_VAR large v13, v14, v15;
+
+int main(void)
+{
+  char s = v7[0] + v8[0];
+  return s + v1 + v3 + v4 + v5 + v6 + v9() + v11() + v12()
+	   + v13.arr[0] + v14.arr[0] + v15.arr[0]
+           - 8;
+}
+_ATEOF
+
+
+cat >dlself.c <<'_ATEOF'
+
+#if defined(LIBA_DLL_IMPORT)
+#  if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__)
+#    define LIBA_SCOPE extern __declspec(dllimport)
+#    if defined(_MSC_VER)
+#      define LIBA_SCOPE_VAR LIBA_SCOPE
+#    endif
+#  endif
+#endif
+#if !defined(LIBA_SCOPE)
+#  define LIBA_SCOPE extern
+#endif
+#if !defined(LIBA_SCOPE_VAR)
+#  define LIBA_SCOPE_VAR extern
+#endif
+#ifdef __cplusplus
+extern "C" {
+#endif
+LIBA_SCOPE_VAR int v1;
+LIBA_SCOPE_VAR int v3, v4;
+LIBA_SCOPE const int v5, v6;
+LIBA_SCOPE_VAR const char* v7;
+LIBA_SCOPE_VAR const char v8[];
+extern int v9(void);
+LIBA_SCOPE_VAR int (*v10) (void);
+LIBA_SCOPE_VAR int (*v11) (void);
+LIBA_SCOPE int (*const v12) (void);
+
+typedef struct { int arr[1000]; } large;
+LIBA_SCOPE_VAR large v13, v14, v15;
+
+extern int w1;
+extern int w3, w4;
+extern const int w5, w6;
+extern const char* w7;
+extern const char w8[];
+extern int w9(void);
+extern int (*w10) (void);
+extern int (*w11) (void);
+extern int (*const w12) (void);
+extern large w13, w14, w15;
+#ifdef __cplusplus
+}
+#endif
+
+int main(void)
+{
+  char s = v7[0] + v8[0] + w7[0] + w8[0];
+  return s + v1 + v3 + v4 + v5 + v6 + v9() + v11() + v12()
+	   + v13.arr[0] + v14.arr[0] + v15.arr[0]
+	   + w1 + w3 + w4 + w5 + w6 + w9() + w11() + w12()
+	   + w13.arr[0] + w14.arr[0] + w15.arr[0]
+           - 16;
+}
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+int w1;
+static int w2;
+int w3 = 0;
+int w4 = 1;
+const int w5 = 0;
+const int w6 = 1;
+const char* w7 = "\01foo";
+const char w8[] = "\01bar";
+int w9(void) { return w2 + 1; }
+int (*w10) (void);
+int (*w11) (void) = w9;
+int (*const w12) (void) = w9;
+large w13;
+large w14 = { { 0 } };
+large w15 = { { 1 } };
+#ifdef __cplusplus
+}
+#endif
+_ATEOF
+
+
+cat >dlselfsyms <<'_ATEOF'
+w1
+w3
+w4
+w5
+w6
+w7
+w8
+w9
+w10
+w11
+w12
+w13
+w14
+w15
+_ATEOF
+
+
+
+{ set +x
+$as_echo "$at_srcdir/stresstest.at:233: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c a.c -o sub/a.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c -o sub/a.lo" "stresstest.at:233"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c a.c -o sub/a.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:233"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/stresstest.at:235: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c b.c -o sub/b.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c b.c -o sub/b.lo" "stresstest.at:235"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c b.c -o sub/b.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:235"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/stresstest.at:237: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS -DLIBA_DLL_IMPORT \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS -DLIBA_DLL_IMPORT $CFLAGS -c main.c" "stresstest.at:237"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS -DLIBA_DLL_IMPORT $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:237"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/stresstest.at:239: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c main.c -o main-static.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c main.c -o main-static.lo" "stresstest.at:239"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c main.c -o main-static.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:239"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/stresstest.at:241: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS -DLIBA_DLL_IMPORT \$CFLAGS -c dlself.c -o sub3/dlself.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS -DLIBA_DLL_IMPORT $CFLAGS -c dlself.c -o sub3/dlself.lo" "stresstest.at:241"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS -DLIBA_DLL_IMPORT $CFLAGS -c dlself.c -o sub3/dlself.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:241"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/stresstest.at:243: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c dlself.c -o sub3/dlself-static.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c dlself.c -o sub3/dlself-static.lo" "stresstest.at:243"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c dlself.c -o sub3/dlself-static.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:243"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+case $allow_undefined_flag in
+  unsupported) undef_opts=-no-undefined ;;
+  *)           undef_opts='"" -no-undefined' ;;
+esac
+
+# expose problems with the regex:
+touch vfoo v.bar
+
+for l1 in $undef_opts
+do
+  for l2 in '' '-export-symbols-regex "v.*"' '-export-symbols asyms'
+  do
+    for l3 in '' '-rpath /nonexistent'
+    do
+      linkargs="$l1 $l2 $l3"
+      for rel in '' ./ `pwd`/
+      do
+	echo "eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o \"$rel\"sub2/liba.la \"$rel\"sub/a.lo' $linkargs"; { set +x
+$as_echo "$at_srcdir/stresstest.at:263: eval '\$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o \"\$rel\"sub2/liba.la \"\$rel\"sub/a.lo' \$linkargs"
+at_fn_check_prepare_dynamic "eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o \"$rel\"sub2/liba.la \"$rel\"sub/a.lo' $linkargs" "stresstest.at:263"
+( $at_check_trace; eval '$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o "$rel"sub2/liba.la "$rel"sub/a.lo' $linkargs
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:263"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+	for st in '' '-static' '-no-install'
+	do
+	  # if -static is not passed, and the library is shared, then we have
+	  # to use -DLIBA_DLL_IMPORT, thus main.lo (and not main-static.lo).
+	  case $st,$l3 in
+	  -static,*) mst=-static ;;
+	  *,-rpath*) mst= ;;
+	  *) mst=-static ;;
+	  esac
+
+	  echo "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o \"$rel\"main$EXEEXT \"$rel\"main$mst.lo \"$rel\"sub2/liba.la"; { set +x
+$as_echo "$at_srcdir/stresstest.at:275: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS \$st -o \"\$rel\"main\$EXEEXT \"\$rel\"main\$mst.lo \"\$rel\"sub2/liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o \"$rel\"main$EXEEXT \"$rel\"main$mst.lo \"$rel\"sub2/liba.la" "stresstest.at:275"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o "$rel"main$EXEEXT "$rel"main$mst.lo "$rel"sub2/liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:275"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+	  lt_exe=./main; if test -f "./main$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/stresstest.at:277: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "stresstest.at:277"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:277"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+	  for l10 in '' '-export-symbols dlselfsyms'
+	  do
+	    echo "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o \"$rel\"sub3/dlself$EXEEXT \"$rel\"sub3/dlself$mst.lo \"$rel\"sub2/liba.la sub/b.lo -dlopen self $l10"; { set +x
+$as_echo "$at_srcdir/stresstest.at:280: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS \$st -o \"\$rel\"sub3/dlself\$EXEEXT \"\$rel\"sub3/dlself\$mst.lo \"\$rel\"sub2/liba.la sub/b.lo -dlopen self \$l10"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o \"$rel\"sub3/dlself$EXEEXT \"$rel\"sub3/dlself$mst.lo \"$rel\"sub2/liba.la sub/b.lo -dlopen self $l10" "stresstest.at:280"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS $st -o "$rel"sub3/dlself$EXEEXT "$rel"sub3/dlself$mst.lo "$rel"sub2/liba.la sub/b.lo -dlopen self $l10
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:280"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+	    lt_exe=./sub3/dlself; if test -f "./sub3/dlself$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/stresstest.at:282: if \"\$lt_exe\" ; then :; else lt_status=\$?; 	   test \$lt_status != 0 && 	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "stresstest.at:282"
+( $at_check_trace; if "$lt_exe" ; then :; else lt_status=$?; 	   test $lt_status != 0 && 	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/stresstest.at:282"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+	  done
+	done
+      done
+    done
+  done
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_114
+#AT_START_115
+at_fn_group_banner 115 'cmdline_wrap.at:28' \
+  "Run tests with low max_cmd_len" "                 " 18
+at_xfail=no
+(
+  $as_echo "115. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+
+sed 's,max_cmd_len=.*,max_cmd_len="24",' < $LIBTOOL > libtool
+chmod +x libtool
+LIBTOOL=`pwd`/libtool
+export LIBTOOL
+# run the suite in a subdirectory, otherwise the two suites will compete
+# for the output file `testsuite.log'.
+mkdir tests
+cd tests
+INNER_TESTSUITEFLAGS="$INNER_TESTSUITEFLAGS abs_top_srcdir=$abs_top_srcdir \
+  abs_builddir=$abs_builddir"
+{ set +x
+$as_echo "$at_srcdir/cmdline_wrap.at:43: \$CONFIG_SHELL \$abs_srcdir/testsuite -k libtool\$INNER_TESTSUITEFLAGS"
+at_fn_check_prepare_dynamic "$CONFIG_SHELL $abs_srcdir/testsuite -k libtool$INNER_TESTSUITEFLAGS" "cmdline_wrap.at:43"
+( $at_check_trace; $CONFIG_SHELL $abs_srcdir/testsuite -k libtool$INNER_TESTSUITEFLAGS
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/cmdline_wrap.at:43"
+$at_failed && at_fn_log_failure  \
+"testsuite.log"
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_115
+#AT_START_116
+at_fn_group_banner 116 'pic_flag.at:24' \
+  "override pic_flag at configure time" "            " 18
+at_xfail=no
+(
+  $as_echo "116. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+# Just try to configure the Libtool package with -fpic if we can compile
+# with it, for C and C++.
+
+cat >foo.c <<'_ATEOF'
+int data = 42;
+int func(void) { return data; }
+_ATEOF
+
+
+cp foo.c foo.cpp
+C_pic_flag='-fpic -DPIC'
+{ set +x
+$as_echo "$at_srcdir/pic_flag.at:36: \$CC \$CPPFLAGS \$CFLAGS \$C_pic_flag -c foo.c || exit 77"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS $C_pic_flag -c foo.c || exit 77" "pic_flag.at:36"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS $C_pic_flag -c foo.c || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/pic_flag.at:36"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+# The configure test for the PIC flag also checks for warnings.
+{ set +x
+$as_echo "$at_srcdir/pic_flag.at:39: grep fpic stdout stderr && exit 77"
+at_fn_check_prepare_trace "pic_flag.at:39"
+( $at_check_trace; grep fpic stdout stderr && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/pic_flag.at:39"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/pic_flag.at:40: grep '[uU]nknown.*option' stdout stderr && exit 77"
+at_fn_check_prepare_trace "pic_flag.at:40"
+( $at_check_trace; grep '[uU]nknown.*option' stdout stderr && exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/pic_flag.at:40"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+CXX_pic_flag='-fpic -DPIC'
+if $CXX $CPPFLAGS $CXXFLAGS $CXX_pic_flag -c foo.cpp; then :; else
+  CXX_pic_flag=
+fi
+
+{ set +x
+$as_echo "$at_srcdir/pic_flag.at:47: test \"\$at_srcdir\" != . || exit 77"
+at_fn_check_prepare_dynamic "test \"$at_srcdir\" != . || exit 77" "pic_flag.at:47"
+( $at_check_trace; test "$at_srcdir" != . || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/pic_flag.at:47"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/pic_flag.at:48: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL \"\$abs_top_srcdir\"/configure \$configure_options lt_cv_prog_compiler_pic=\"\$C_pic_flag\" 		lt_cv_prog_compiler_pic_CXX=\"\$CXX_pic_flag\""
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "pic_flag.at:48"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL "$abs_top_srcdir"/configure $configure_options lt_cv_prog_compiler_pic="$C_pic_flag" 		lt_cv_prog_compiler_pic_CXX="$CXX_pic_flag"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/pic_flag.at:48"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+: ${MAKE=make}
+{ set +x
+$as_echo "$at_srcdir/pic_flag.at:52: \$MAKE"
+at_fn_check_prepare_dynamic "$MAKE" "pic_flag.at:52"
+( $at_check_trace; $MAKE
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/pic_flag.at:52"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/pic_flag.at:53: if ./libtool --features | grep 'enable shared libraries'; then 	   grep ' -fpic' stdout; else exit 77; fi"
+at_fn_check_prepare_notrace 'a shell pipeline' "pic_flag.at:53"
+( $at_check_trace; if ./libtool --features | grep 'enable shared libraries'; then 	   grep ' -fpic' stdout; else exit 77; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/pic_flag.at:53"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_116
+#AT_START_117
+at_fn_group_banner 117 'darwin.at:26' \
+  "darwin fat compile" "                             " 19
+at_xfail=no
+(
+  $as_echo "117. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+noskip=:
+case "$host_os" in
+darwin*) ;;
+*) noskip=false ;;
+esac
+
+cat >simple.c  <<'_ATEOF'
+
+int main() { return 0;}
+_ATEOF
+
+
+$noskip && {
+$CC $CPPFLAGS $CFLAGS -arch ppc -arch i386 -o simple simple.c 2>&1 > /dev/null || noskip=false
+rm -f simple
+}
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:42: \$noskip || (exit 77)"
+at_fn_check_prepare_dynamic "$noskip || (exit 77)" "darwin.at:42"
+( $at_check_trace; $noskip || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:42"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+cat >foo.c <<'_ATEOF'
+
+int x=0;
+_ATEOF
+
+
+cat >baz.c <<'_ATEOF'
+
+int y=0;
+_ATEOF
+
+
+cat >bar.c <<'_ATEOF'
+
+extern int x;
+int bar(void);
+int bar() { return x;}
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+
+extern int x;
+extern int y;
+
+int main() {
+return x+y;
+}
+_ATEOF
+
+
+mkdir bin
+cat >bin/basename <<'_ATEOF'
+
+#! /bin/sh
+
+usage="usage: $0 argument"
+if test $# != 1; then
+                  echo $usage >&2
+                  exit 1
+fi
+
+echo $1 | sed "s,^.*/,,"
+_ATEOF
+
+
+chmod +x bin/basename
+save_PATH=$PATH
+PATH=`pwd`/bin:$PATH
+export PATH
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:85: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o foo.lo \$CPPFLAGS \$CFLAGS -arch ppc -arch i386 foo.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o foo.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 foo.c" "darwin.at:85"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o foo.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 foo.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:85"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:87: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o baz.lo \$CPPFLAGS \$CFLAGS -arch ppc -arch i386 baz.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o baz.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 baz.c" "darwin.at:87"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o baz.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 baz.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:87"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:89: \$LIBTOOL --mode=link --tag=CC \$CC -o libfoo.la \$CPPFLAGS \$CFLAGS \$LDFLAGS -arch ppc -arch i386 foo.lo baz.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS -arch ppc -arch i386 foo.lo baz.lo" "darwin.at:89"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC -o libfoo.la $CPPFLAGS $CFLAGS $LDFLAGS -arch ppc -arch i386 foo.lo baz.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:89"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:91: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o bar.lo \$CPPFLAGS \$CFLAGS -arch ppc -arch i386 bar.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o bar.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 bar.c" "darwin.at:91"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o bar.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 bar.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:91"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:93: \$LIBTOOL --mode=link --tag=CC \$CC  -o libbar.la \$CPPFLAGS \$CFLAGS \$LDFLAGS -arch ppc -arch i386 bar.lo libfoo.la -rpath /nonexistent"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC  -o libbar.la $CPPFLAGS $CFLAGS $LDFLAGS -arch ppc -arch i386 bar.lo libfoo.la -rpath /nonexistent" "darwin.at:93"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC  -o libbar.la $CPPFLAGS $CFLAGS $LDFLAGS -arch ppc -arch i386 bar.lo libfoo.la -rpath /nonexistent
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:93"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:95: \$LIBTOOL --mode=compile --tag=CC \$CC -c -o main.lo \$CPPFLAGS \$CFLAGS -arch ppc -arch i386 main.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile --tag=CC $CC -c -o main.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 main.c" "darwin.at:95"
+( $at_check_trace; $LIBTOOL --mode=compile --tag=CC $CC -c -o main.lo $CPPFLAGS $CFLAGS -arch ppc -arch i386 main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:95"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:97: \$LIBTOOL --mode=link --tag=CC \$CC  -o main\$EXEEXT \$CPPFLAGS \$CFLAGS \$LDFLAGS -arch ppc -arch i386 main.lo libbar.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link --tag=CC $CC  -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS -arch ppc -arch i386 main.lo libbar.la" "darwin.at:97"
+( $at_check_trace; $LIBTOOL --mode=link --tag=CC $CC  -o main$EXEEXT $CPPFLAGS $CFLAGS $LDFLAGS -arch ppc -arch i386 main.lo libbar.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:97"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+PATH=$save_PATH
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_117
+#AT_START_118
+at_fn_group_banner 118 'darwin.at:103' \
+  "darwin concurrent library extraction" "           " 19
+at_xfail=no
+(
+  $as_echo "118. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >foo.c <<'_ATEOF'
+
+int foo (void) { return 0; }
+_ATEOF
+
+
+cat >bar.c <<'_ATEOF'
+
+extern int foo1 (void);
+int bar (void) { return foo1 (); }
+_ATEOF
+
+cp bar.c baz.c
+
+objects=
+for obj in 1 2 3 4 5 6 7 8; do
+  sed "s/foo/foo$obj/" < foo.c > foo$obj.c
+  { set +x
+$as_echo "$at_srcdir/darwin.at:118: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c foo\$obj.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c foo$obj.c" "darwin.at:118"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c foo$obj.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:118"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  objects="$objects foo$obj.lo"
+done
+{ set +x
+$as_echo "$at_srcdir/darwin.at:122: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c bar.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c bar.c" "darwin.at:122"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c bar.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:122"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:124: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c baz.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c baz.c" "darwin.at:124"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c baz.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:124"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:126: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libfoo.la \$objects"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libfoo.la $objects" "darwin.at:126"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libfoo.la $objects
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:126"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Hypothesis: concurrent convenience archive extraction works.
+for i in 1 2 3 4 5; do
+  rm -f libbar.la libbaz.la
+  { set +x
+$as_echo "$at_srcdir/darwin.at:132: (\$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS 	     -o libbar.la bar.lo -rpath /foo libfoo.la) & 	   (\$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS 	     -o libbaz.la baz.lo -rpath /foo libfoo.la) & 	   wait; test -f libbar.la && test -f libbaz.la"
+at_fn_check_prepare_dynamic "($LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS 	     -o libbar.la bar.lo -rpath /foo libfoo.la) & 	   ($LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS 	     -o libbaz.la baz.lo -rpath /foo libfoo.la) & 	   wait; test -f libbar.la && test -f libbaz.la" "darwin.at:132"
+( $at_check_trace; ($LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS 	     -o libbar.la bar.lo -rpath /foo libfoo.la) & 	   ($LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS 	     -o libbaz.la baz.lo -rpath /foo libfoo.la) & 	   wait; test -f libbar.la && test -f libbaz.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:132"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+# Hypothesis: the lock is not used in dry run mode.
+eval "`$LIBTOOL --config | $EGREP '^(objdir)='`"
+# Next line is internal detail.
+lockfile=$objdir/libfoo.a.lock
+echo stamp > $lockfile
+{ set +x
+$as_echo "$at_srcdir/darwin.at:145: \$LIBTOOL --dry-run --mode=link \$CC \$CFLAGS \$LDFLAGS 	  -o libbar.la bar.lo -rpath /foo libfoo.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --dry-run --mode=link $CC $CFLAGS $LDFLAGS 	  -o libbar.la bar.lo -rpath /foo libfoo.la" "darwin.at:145"
+( $at_check_trace; $LIBTOOL --dry-run --mode=link $CC $CFLAGS $LDFLAGS 	  -o libbar.la bar.lo -rpath /foo libfoo.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:145"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:148: grep stamp \$lockfile"
+at_fn_check_prepare_dynamic "grep stamp $lockfile" "darwin.at:148"
+( $at_check_trace; grep stamp $lockfile
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:148"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_118
+#AT_START_119
+at_fn_group_banner 119 'darwin.at:152' \
+  "darwin gdb debug information" "                   " 19
+at_xfail=no
+
+eval "`$LIBTOOL --config | $EGREP '^(whole_archive_flag_spec)='`"
+case $whole_archive_flag_spec:$host_os in
+:darwin*) : ;;
+*) false ;;
+esac  && at_xfail=yes
+(
+  $as_echo "119. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:154: gdb --version || (exit 77)"
+at_fn_check_prepare_trace "darwin.at:154"
+( $at_check_trace; gdb --version || (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/darwin.at:154"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+cat >foo.c <<'_ATEOF'
+
+int foo (void) { return 0; }
+_ATEOF
+
+
+cat >bar.c <<'_ATEOF'
+
+extern int foo (void);
+int bar (void) { return foo (); }
+_ATEOF
+
+
+cat >main.c <<'_ATEOF'
+
+extern int bar(void);
+
+int main() { return bar();}
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:171: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c bar.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c bar.c" "darwin.at:171"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c bar.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:171"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:173: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c foo.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c foo.c" "darwin.at:173"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c foo.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:173"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:175: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c main.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c main.c" "darwin.at:175"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c main.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:175"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:178: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libfoo.la foo.lo"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libfoo.la foo.lo" "darwin.at:178"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libfoo.la foo.lo
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:178"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:181: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS 	   -o libbar.la bar.lo -rpath /foo libfoo.la "
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS 	   -o libbar.la bar.lo -rpath /foo libfoo.la " "darwin.at:181"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS 	   -o libbar.la bar.lo -rpath /foo libfoo.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:181"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:185: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS 	   -o main main.lo libbar.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS 	   -o main main.lo libbar.la" "darwin.at:185"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS 	   -o main main.lo libbar.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:185"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:187: echo quit | \$LIBTOOL --mode=execute gdb main"
+at_fn_check_prepare_notrace 'a shell pipeline' "darwin.at:187"
+( $at_check_trace; echo quit | $LIBTOOL --mode=execute gdb main
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/darwin.at:187"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:190: grep 'Could not find object file' stderr"
+at_fn_check_prepare_trace "darwin.at:190"
+( $at_check_trace; grep 'Could not find object file' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/darwin.at:190"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+# Remove any dSYM bundle
+rm -rf .libs/*.dSYM
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:202: echo quit | \$LIBTOOL --mode=execute gdb main"
+at_fn_check_prepare_notrace 'a shell pipeline' "darwin.at:202"
+( $at_check_trace; echo quit | $LIBTOOL --mode=execute gdb main
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/darwin.at:202"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:204: grep 'Could not find object file' stderr"
+at_fn_check_prepare_trace "darwin.at:204"
+( $at_check_trace; grep 'Could not find object file' stderr
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 1 $at_status "$at_srcdir/darwin.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_119
+#AT_START_120
+at_fn_group_banner 120 'darwin.at:208' \
+  "darwin ld warnings changing configure results" "  " 19
+at_xfail=no
+      case ,$AUTORECONF,$AUTOCONF,$AUTOHEADER,$ACLOCAL,$AUTOMAKE, in *,no,*) :;; *) false;; esac && at_xfail=yes
+(
+  $as_echo "120. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+cat >configure.ac <<'_ATEOF'
+AC_INIT([ld-stderr], 2.4.2, bug-libtool@gnu.org)
+AC_CONFIG_MACRO_DIR([m4])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+LT_INIT
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
+_ATEOF
+
+
+cat >Makefile.am <<'_ATEOF'
+
+ACLOCAL_AMFLAGS = -I m4
+_ATEOF
+
+$LIBTOOLIZE --copy --force
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:224: \$AUTORECONF --force --install"
+at_fn_check_prepare_dynamic "$AUTORECONF --force --install" "darwin.at:224"
+( $at_check_trace; $AUTORECONF --force --install
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:224"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/darwin.at:224: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "darwin.at:224"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/darwin.at:224"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:225: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "darwin.at:225"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:225"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:226: ./libtool --config"
+at_fn_check_prepare_trace "darwin.at:226"
+( $at_check_trace; ./libtool --config
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_skip $at_status "$at_srcdir/darwin.at:226"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+mv stdout expout
+{ set +x
+$as_echo "$at_srcdir/darwin.at:228: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options LDFLAGS=-L/there/is/no/dir/here"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "darwin.at:228"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options LDFLAGS=-L/there/is/no/dir/here
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:228"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:229: ./libtool --config"
+at_fn_check_prepare_trace "darwin.at:229"
+( $at_check_trace; ./libtool --config
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+$at_diff expout "$at_stdout" || at_failed=:
+at_fn_check_skip $at_status "$at_srcdir/darwin.at:229"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_120
+#AT_START_121
+at_fn_group_banner 121 'darwin.at:232' \
+  "darwin can lt_dlopen .dylib and .so files" "      " 19
+at_xfail=no
+(
+  $as_echo "121. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+
+# This test requires shared library support.
+{ set +x
+$as_echo "$at_srcdir/darwin.at:237: \$LIBTOOL --features | grep 'enable shared libraries' || exit 77"
+at_fn_check_prepare_notrace 'a shell pipeline' "darwin.at:237"
+( $at_check_trace; $LIBTOOL --features | grep 'enable shared libraries' || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:237"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+eval `$LIBTOOL --config | $EGREP '^shrext_cmds='`
+
+module=no
+eval shared_ext=\"$shrext_cmds\"
+module=yes
+eval module_ext=\"$shrext_cmds\"
+
+# Only bother with this test if module extension is different from
+# shared extension
+{ set +x
+$as_echo "$at_srcdir/darwin.at:249: test \"\$shared_ext\" != \"\$module_ext\" || exit 77"
+at_fn_check_prepare_dynamic "test \"$shared_ext\" != \"$module_ext\" || exit 77" "darwin.at:249"
+( $at_check_trace; test "$shared_ext" != "$module_ext" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:249"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Skip this test when called from:
+#    make distcheck DISTCHECK_CONFIGURE_FLAGS=--disable-ltdl-install
+{ set +x
+$as_echo "$at_srcdir/darwin.at:253: case \$LIBLTDL in #(
+ */_inst/lib/*) test -f \$LIBLTDL || (exit 77) ;;
+esac"
+at_fn_check_prepare_notrace 'an embedded newline' "darwin.at:253"
+( $at_check_trace; case $LIBLTDL in #(
+ */_inst/lib/*) test -f $LIBLTDL || (exit 77) ;;
+esac
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:253"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+prefix=`pwd`/inst
+libdir=$prefix/lib
+bindir=$prefix/bin
+mkdir $prefix $libdir $bindir
+
+# This code is copied from the Autobook:
+# <http://sources.redhat.com/autobook/autobook/autobook_169.html>
+# so if it needs changes, be sure to notify the Autobook authors
+# about them.
+
+cat >simple-module.c <<'_ATEOF'
+
+#include <stdio.h>
+
+#ifdef __cplusplus
+extern "C"
+#endif
+int
+run (const char *argument)
+{
+  printf ("Hello, %s!\n", argument);
+  return 0;
+}
+_ATEOF
+
+
+cat >ltdl-loader.c <<'_ATEOF'
+
+#include <stdio.h>
+#include <stdlib.h>
+#ifndef EXIT_FAILURE
+#  define EXIT_FAILURE        1
+#  define EXIT_SUCCESS        0
+#endif
+
+#include <limits.h>
+#ifndef PATH_MAX
+#  define PATH_MAX 255
+#endif
+
+#include <string.h>
+#include <ltdl.h>
+
+#ifndef MODULE_PATH_ENV
+#  define MODULE_PATH_ENV        "MODULE_PATH"
+#endif
+
+typedef int entrypoint (const char *argument);
+
+/* Save and return a copy of the dlerror() error  message,
+   since the next API call may overwrite the original. */
+static char *dlerrordup (char *errormsg);
+
+int
+main (int argc, const char *argv[])
+{
+  char *errormsg = NULL;
+  lt_dlhandle module = NULL;
+  entrypoint *run = NULL;
+  int errors = 0;
+
+  if (argc != 3)
+    {
+      fprintf (stderr, "USAGE: main MODULENAME ARGUMENT\n");
+      exit (EXIT_FAILURE);
+    }
+
+  /* Initialise libltdl. */
+  errors = lt_dlinit ();
+
+  /* Set the module search path. */
+  if (!errors)
+    {
+      const char *path = getenv (MODULE_PATH_ENV);
+
+      if (path != NULL)
+        errors = lt_dlsetsearchpath (path);
+    }
+
+  /* Load the module. */
+  if (!errors)
+    module = lt_dlopenext (argv[1]);
+
+  /* Find the entry point. */
+  if (module)
+    {
+      run = (entrypoint *) lt_dlsym (module, "run");
+
+      /* In principle, run might legitimately be NULL, so
+         I don't use run == NULL as an error indicator
+         in general. */
+      errormsg = dlerrordup (errormsg);
+      if (errormsg != NULL)
+        {
+          errors = lt_dlclose (module);
+          module = NULL;
+        }
+    }
+  else
+    errors = 1;
+
+  /* Call the entry point function. */
+  if (!errors)
+    {
+      int result = (*run) (argv[2]);
+      if (result < 0)
+        errormsg = strdup ("module entry point execution failed");
+      else
+        printf ("\t=> %d\n", result);
+    }
+
+  /* Unload the module, now that we are done with it. */
+  if (!errors)
+    errors = lt_dlclose (module);
+
+  if (errors)
+    {
+      /* Diagnose the encountered error. */
+      errormsg = dlerrordup (errormsg);
+
+      if (!errormsg)
+        {
+          fprintf (stderr, "%s: dlerror() failed.\n", argv[0]);
+          return EXIT_FAILURE;
+        }
+    }
+
+  /* Finished with ltdl now. */
+  if (!errors)
+    if (lt_dlexit () != 0)
+      errormsg = dlerrordup (errormsg);
+
+  if (errormsg)
+    {
+      fprintf (stderr, "%s: %s.\n", argv[0], errormsg);
+      free (errormsg);
+      exit (EXIT_FAILURE);
+    }
+
+  return EXIT_SUCCESS;
+}
+
+/* Be careful to save a copy of the error message,
+   since the  next API call may overwrite the original. */
+static char *
+dlerrordup (char *errormsg)
+{
+  char *error = (char *) lt_dlerror ();
+  if (error && !errormsg)
+    errormsg = strdup (error);
+  return errormsg;
+}
+_ATEOF
+
+
+: ${LTDLINCL="-I$abs_top_srcdir/libltdl"}
+: ${LIBLTDL="$abs_builddir/../libltdl/libltdlc.la"}
+
+CPPFLAGS="$LTDLINCL $CPPFLAGS"
+LDFLAGS="$LDFLAGS -no-undefined"
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:416: \$LIBTOOL --mode=compile \$CC \$CPPFLAGS \$CFLAGS -c simple-module.c"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c simple-module.c" "darwin.at:416"
+( $at_check_trace; $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c simple-module.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:416"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:418: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o simple-module.la 	 simple-module.lo -rpath \$libdir -module -avoid-version"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o simple-module.la 	 simple-module.lo -rpath $libdir -module -avoid-version" "darwin.at:418"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o simple-module.la 	 simple-module.lo -rpath $libdir -module -avoid-version
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:418"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:421: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libsimple-dylib.la 	 simple-module.lo -rpath \$libdir -avoid-version"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libsimple-dylib.la 	 simple-module.lo -rpath $libdir -avoid-version" "darwin.at:421"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libsimple-dylib.la 	 simple-module.lo -rpath $libdir -avoid-version
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:421"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:424: \$CC \$CPPFLAGS \$CFLAGS -c ltdl-loader.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c ltdl-loader.c" "darwin.at:424"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c ltdl-loader.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:424"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:426: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o ltdl-loader\$EXEEXT 	 ltdl-loader.\$OBJEXT -dlopen self \$LIBLTDL"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o ltdl-loader$EXEEXT 	 ltdl-loader.$OBJEXT -dlopen self $LIBLTDL" "darwin.at:426"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o ltdl-loader$EXEEXT 	 ltdl-loader.$OBJEXT -dlopen self $LIBLTDL
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:426"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:429: \$LIBTOOL --mode=install cp simple-module.la \$libdir/simple-module.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp simple-module.la $libdir/simple-module.la" "darwin.at:429"
+( $at_check_trace; $LIBTOOL --mode=install cp simple-module.la $libdir/simple-module.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:429"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:430: \$LIBTOOL --mode=install cp libsimple-dylib.la \$libdir/libsimple-dylib.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp libsimple-dylib.la $libdir/libsimple-dylib.la" "darwin.at:430"
+( $at_check_trace; $LIBTOOL --mode=install cp libsimple-dylib.la $libdir/libsimple-dylib.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:430"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:431: \$LIBTOOL --mode=clean rm -f simple-module.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f simple-module.la" "darwin.at:431"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f simple-module.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:431"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/darwin.at:432: \$LIBTOOL --mode=clean rm -f libsimple-dylib.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f libsimple-dylib.la" "darwin.at:432"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f libsimple-dylib.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:432"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+rm $libdir/simple-module.la
+rm $libdir/libsimple-dylib.la
+
+for dir in inst/lib "$libdir"; do
+  lt_exe=./ltdl-loader; if test -f "./ltdl-loader$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/darwin.at:438: if \"\$lt_exe\" \$dir/simple-module World; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" $dir/simple-module World; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "darwin.at:438"
+( $at_check_trace; if "$lt_exe" $dir/simple-module World; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:438"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  { set +x
+$as_echo "$at_srcdir/darwin.at:440: grep \"Hello, World\" stdout"
+at_fn_check_prepare_trace "darwin.at:440"
+( $at_check_trace; grep "Hello, World" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:440"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  lt_exe=./ltdl-loader; if test -f "./ltdl-loader$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+{ set +x
+$as_echo "$at_srcdir/darwin.at:441: if \"\$lt_exe\" \$dir/libsimple-dylib World; then :; else lt_status=\$?; 	   	   test \"X\$host\" != \"X\$build\" && test -x \"\$lt_exe\" && exit 77; 	   exit \$lt_status; fi"
+at_fn_check_prepare_dynamic "if \"$lt_exe\" $dir/libsimple-dylib World; then :; else lt_status=$?; 	   	   test \"X$host\" != \"X$build\" && test -x \"$lt_exe\" && exit 77; 	   exit $lt_status; fi" "darwin.at:441"
+( $at_check_trace; if "$lt_exe" $dir/libsimple-dylib World; then :; else lt_status=$?; 	   	   test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; 	   exit $lt_status; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:441"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  { set +x
+$as_echo "$at_srcdir/darwin.at:443: grep \"Hello, World\" stdout"
+at_fn_check_prepare_trace "darwin.at:443"
+( $at_check_trace; grep "Hello, World" stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/darwin.at:443"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_121
+#AT_START_122
+at_fn_group_banner 122 'dumpbin-symbols.at:25' \
+  "dumpbin -symbols section hiding" "                " 20
+at_xfail=no
+(
+  $as_echo "122. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+# I don't know of a stable way to create a pair of objects that
+# exhibits the potential problem, so this test fakes it by
+# testing with output from a case that do have the potential
+# problem.
+
+# First check if the global_symbol_pipe can handle the below
+# test case at all, and skip if $NM is not MS dumpbin.
+
+cat >variable.c <<'_ATEOF'
+
+int some_variable = 0;
+_ATEOF
+
+
+{ set +x
+$as_echo "$at_srcdir/dumpbin-symbols.at:40: \$CC \$CPPFLAGS \$CFLAGS -c variable.c"
+at_fn_check_prepare_dynamic "$CC $CPPFLAGS $CFLAGS -c variable.c" "dumpbin-symbols.at:40"
+( $at_check_trace; $CC $CPPFLAGS $CFLAGS -c variable.c
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dumpbin-symbols.at:40"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/dumpbin-symbols.at:41: \$NM variable.\$OBJEXT"
+at_fn_check_prepare_dynamic "$NM variable.$OBJEXT" "dumpbin-symbols.at:41"
+( $at_check_trace; $NM variable.$OBJEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dumpbin-symbols.at:41"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/dumpbin-symbols.at:42: grep 'External.*some_variable' stdout || exit 77"
+at_fn_check_prepare_trace "dumpbin-symbols.at:42"
+( $at_check_trace; grep 'External.*some_variable' stdout || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dumpbin-symbols.at:42"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+eval `$LIBTOOL --config | $EGREP '^(global_symbol_pipe)='`
+
+cat >dumpbin-output <<'_ATEOF'
+
+Dump of file foo.obj
+
+File Type: COFF OBJECT
+
+COFF SYMBOL TABLE
+000 00AB766F ABS    notype       Static       | @comp.id
+001 00000001 ABS    notype       Static       | @feat.00
+002 00000000 SECT1  notype       Static       | .drectve
+    Section length   8F, #relocs    0, #linenums    0, checksum        0
+004 00000000 SECT2  notype       Static       | .debug$S
+    Section length 44B4, #relocs   1C, #linenums    0, checksum        0
+006 00000000 SECT3  notype       Static       | .rdata
+    Section length    1, #relocs    0, #linenums    0, checksum        0, selection    2 (pick any)
+008 00000000 SECT3  notype       External     | ?value@?$integral_constant@_N$0A@@tr1@std@@2_NB (public: static bool const std::tr1::integral_constant<bool,0>::value)
+009 00000000 SECT4  notype       Static       | .rdata
+    Section length    1, #relocs    0, #linenums    0, checksum 77073096, selection    2 (pick any)
+*snip lots of uninteresting crap*
+12A 00000000 SECT5B notype       Static       | .text
+    Section length   4B, #relocs    2, #linenums    0, checksum 22AE8362, selection    2 (pick any)
+12C 00000000 SECT5C notype       Static       | .debug$S
+    Section length  150, #relocs    B, #linenums    0, checksum        0, selection    5 (pick associative Section 0x5B)
+12F 00000000 SECT5D notype       Static       | .debug$T
+    Section length   5C, #relocs    0, #linenums    0, checksum        0
+
+String Table Size = 0x15EF bytes
+
+
+Dump of file conv.lib
+
+File Type: LIBRARY
+
+COFF SYMBOL TABLE
+000 00AB766F ABS    notype       Static       | @comp.id
+001 00000001 ABS    notype       Static       | @feat.00
+002 00000000 SECT1  notype       Static       | .drectve
+    Section length   2F, #relocs    0, #linenums    0, checksum        0
+004 00000000 SECT2  notype       Static       | .debug$S
+    Section length  70C, #relocs    5, #linenums    0, checksum        0
+006 00000000 SECT3  notype       Static       | .text
+    Section length    A, #relocs    0, #linenums    0, checksum BAFC81C1
+008 00000000 SECT3  notype ()    External     | _convenience
+009 00000000 SECT4  notype       Static       | .debug$T
+    Section length   5C, #relocs    0, #linenums    0, checksum        0
+
+String Table Size = 0x11 bytes
+
+  Summary
+
+        5B3C .debug$S
+          B8 .debug$T
+          BE .drectve
+         129 .rdata
+           C .sxdata
+         613 .text
+          6C .text$x
+          B8 .xdata$x
+_ATEOF
+
+
+# Check if the _convenience symbol from section SECT3 in conv.lib is
+# present even if section SECT3 in foo.obj is hidden.
+{ set +x
+$as_echo "$at_srcdir/dumpbin-symbols.at:108: < dumpbin-output eval \"\$global_symbol_pipe\""
+at_fn_check_prepare_dynamic "< dumpbin-output eval \"$global_symbol_pipe\"" "dumpbin-symbols.at:108"
+( $at_check_trace; < dumpbin-output eval "$global_symbol_pipe"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; tee stdout <"$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dumpbin-symbols.at:108"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/dumpbin-symbols.at:109: grep convenience stdout"
+at_fn_check_prepare_trace "dumpbin-symbols.at:109"
+( $at_check_trace; grep convenience stdout
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/dumpbin-symbols.at:109"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_122
+#AT_START_123
+at_fn_group_banner 123 'deplibs-mingw.at:27' \
+  "deplibs without file command" "                   " 20
+at_xfail=no
+(
+  $as_echo "123. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+cwd=`pwd`
+instdir=$cwd/inst
+libdir=$instdir/lib
+bindir=$instdir/bin
+LDFLAGS="$LDFLAGS -no-undefined"
+
+mkdir inst inst/bin inst/lib
+
+cat >a.c <<'_ATEOF'
+int a () { return 0; }
+_ATEOF
+
+cat >b.c <<'_ATEOF'
+extern int a ();
+int b () { return a (); }
+_ATEOF
+
+
+for file in a.c b.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+{ set +x
+$as_echo "$at_srcdir/deplibs-mingw.at:49: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o liba.la a.lo -rpath \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir" "deplibs-mingw.at:49"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la a.lo -rpath $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-mingw.at:49"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/deplibs-mingw.at:51: library_names= && . ./liba.la && if test -z \"\$library_names\"; then exit 77; fi "
+at_fn_check_prepare_dynamic "library_names= && . ./liba.la && if test -z \"$library_names\"; then exit 77; fi " "deplibs-mingw.at:51"
+( $at_check_trace; library_names= && . ./liba.la && if test -z "$library_names"; then exit 77; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-mingw.at:51"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/deplibs-mingw.at:53: \$LIBTOOL --mode=install cp liba.la \$libdir"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=install cp liba.la $libdir" "deplibs-mingw.at:53"
+( $at_check_trace; $LIBTOOL --mode=install cp liba.la $libdir
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-mingw.at:53"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/deplibs-mingw.at:54: \$LIBTOOL --mode=clean rm -f liba.la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=clean rm -f liba.la" "deplibs-mingw.at:54"
+( $at_check_trace; $LIBTOOL --mode=clean rm -f liba.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-mingw.at:54"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+rm -f $libdir/liba.la
+
+# check once with `file' (if present) and once without, if on MinGW.
+for try in with-file without-file; do
+  { set +x
+$as_echo "$at_srcdir/deplibs-mingw.at:59: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libb.la b.lo -rpath \$libdir 	   -L\$libdir -la"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la b.lo -rpath $libdir 	   -L$libdir -la" "deplibs-mingw.at:59"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la b.lo -rpath $libdir 	   -L$libdir -la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-mingw.at:59"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+  { set +x
+$as_echo "$at_srcdir/deplibs-mingw.at:62: library_names= && . ./libb.la && if test -z \"\$library_names\"; then exit 99; fi "
+at_fn_check_prepare_dynamic "library_names= && . ./libb.la && if test -z \"$library_names\"; then exit 99; fi " "deplibs-mingw.at:62"
+( $at_check_trace; library_names= && . ./libb.la && if test -z "$library_names"; then exit 99; fi
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-mingw.at:62"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+  case $host_os in
+  mingw*)
+    if file /; then
+      mkdir bin new-libtool
+
+      cat >bin/file <<\EOF
+#! /bin/sh
+exit 1
+EOF
+      chmod +x bin/file
+      PATH=`pwd`/bin${PATH_SEPARATOR-:}$PATH
+      cd new-libtool
+      # configure might fail due to in-tree build of toplevel, or
+      # missing configure flags and other reasons.
+      { set +x
+$as_echo "$at_srcdir/deplibs-mingw.at:79: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL \"\$abs_top_srcdir\"/configure \$configure_options || exit 77"
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "deplibs-mingw.at:79"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL "$abs_top_srcdir"/configure $configure_options || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-mingw.at:79"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+      cd ..
+      LIBTOOL=new-libtool/libtool
+      export LIBTOOL
+      # Check whether the generated script is usable; otherwise, skip.
+      { set +x
+$as_echo "$at_srcdir/deplibs-mingw.at:84: \$LIBTOOL --mode=link \$CC \$CFLAGS \$LDFLAGS -o libunrelated.la a.lo -rpath \$libdir 	       || exit 77"
+at_fn_check_prepare_dynamic "$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libunrelated.la a.lo -rpath $libdir 	       || exit 77" "deplibs-mingw.at:84"
+( $at_check_trace; $LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libunrelated.la a.lo -rpath $libdir 	       || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/deplibs-mingw.at:84"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+    else
+      break;
+    fi;;
+  *)
+    break;;
+  esac
+done
+
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_123
+#AT_START_124
+at_fn_group_banner 124 'sysroot.at:203' \
+  "-L=.../lib -l" "                                  " 21
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "124. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+gcc_sysroot=`$CC --print-sysroot 2> /dev/null`
+if test $? != 0; then
+  gcc_sysroot=
+fi
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: test -n \"\$gcc_sysroot\" || exit 77"
+at_fn_check_prepare_dynamic "test -n \"$gcc_sysroot\" || exit 77" "sysroot.at:203"
+( $at_check_trace; test -n "$gcc_sysroot" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Detect installation prefix for the compiler
+prefix=
+for i in crt0.o crt1.o crt2.o crti.o; do
+  j=`$CC --print-file-name $i 2> /dev/null`
+  test $? = 0 || continue
+  case "$j" in
+    $gcc_sysroot*/lib/$i)
+      prefix=`echo "$j" | sed "s,^$gcc_sysroot\\(.*\\)/lib/$i\$,\\1,"`
+      break ;;
+  esac
+done
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: test -n \"\$prefix\" || exit 77"
+at_fn_check_prepare_dynamic "test -n \"$prefix\" || exit 77" "sysroot.at:203"
+( $at_check_trace; test -n "$prefix" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+sysroot=`pwd`/sys-root
+
+# difficult to use AS_DIRNAME inside the AT_CHECK macro, so
+# encapsulate as a shell function.
+local_dirname() {
+  $as_dirname -- "$1" ||
+$as_expr X"$1" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$1" : 'X\(//\)[^/]' \| \
+	 X"$1" : 'X\(//\)$' \| \
+	 X"$1" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$1" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'
+}
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203:
+(cd \"\$gcc_sysroot\" && find \".\$prefix/bin\" \".\$prefix/include\" \".\$prefix/lib\" \\! -type d) | \\
+while read file; do
+  dir=\`local_dirname \"\$sysroot/\$file\"\`
+  test -d \"\$dir\" || mkdir -p \"\$dir\"
+  rm -f \"\$sysroot/\$file\"
+  ln -s \"\$gcc_sysroot/\$file\" \"\$sysroot/\$file\" || \\
+    cp \"\$gcc_sysroot/\$file\" \"\$sysroot/\$file\"
+done"
+at_fn_check_prepare_notrace 'a `...` command substitution' "sysroot.at:203"
+( $at_check_trace;
+(cd "$gcc_sysroot" && find ".$prefix/bin" ".$prefix/include" ".$prefix/lib" \! -type d) | \
+while read file; do
+  dir=`local_dirname "$sysroot/$file"`
+  test -d "$dir" || mkdir -p "$dir"
+  rm -f "$sysroot/$file"
+  ln -s "$gcc_sysroot/$file" "$sysroot/$file" || \
+    cp "$gcc_sysroot/$file" "$sysroot/$file"
+done
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+LDFLAGS="$LDFLAGS --sysroot=$sysroot -no-undefined"
+configure_options="$configure_options --with-sysroot=$sysroot --prefix=$prefix"
+
+#???
+if test "$shlibpath_var" = PATH; then
+  configure_options="$configure_options --libdir=/$prefix/bin"
+fi
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: mkdir lib1 lib2 prog"
+at_fn_check_prepare_trace "sysroot.at:203"
+( $at_check_trace; mkdir lib1 lib2 prog
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Build and install package 1.
+cat >lib1/configure.ac <<'_ATEOF'
+AC_INIT([lib1], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([lib1.c])
+LT_INIT
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >lib1/Makefile.am <<'_ATEOF'
+lib_LTLIBRARIES = lib1.la
+lib1_la_SOURCES = lib1.c
+lib1_la_LDFLAGS = -rpath $(libdir)
+_ATEOF
+
+
+cat >lib1/lib1.c <<'_ATEOF'
+#include <string.h>
+#include <stdlib.h>
+char *f(const char *s)
+{
+  return strdup (s);
+}
+_ATEOF
+
+
+cd lib1
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "sysroot.at:203"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "sysroot.at:203"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:203: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "sysroot.at:203"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "sysroot.at:203"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "sysroot.at:203"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "sysroot.at:203"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$MAKE install DESTDIR=\$sysroot"
+at_fn_check_prepare_dynamic "$MAKE install DESTDIR=$sysroot" "sysroot.at:203"
+( $at_check_trace; $MAKE install DESTDIR=$sysroot
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: test -f \"\$sysroot/\$prefix/lib/lib1.la\""
+at_fn_check_prepare_dynamic "test -f \"$sysroot/$prefix/lib/lib1.la\"" "sysroot.at:203"
+( $at_check_trace; test -f "$sysroot/$prefix/lib/lib1.la"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: grep -F \"\$sysroot\" \"\$sysroot/\$prefix/lib/lib1.la\""
+at_fn_check_prepare_dynamic "grep -F \"$sysroot\" \"$sysroot/$prefix/lib/lib1.la\"" "sysroot.at:203"
+( $at_check_trace; grep -F "$sysroot" "$sysroot/$prefix/lib/lib1.la"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ..
+
+# Build and install package 2.
+cat >lib2/configure.ac <<'_ATEOF'
+AC_INIT([lib2], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([lib2.c])
+LT_INIT
+sysroot=$with_sysroot
+AC_SUBST([sysroot])
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >lib2/Makefile.am <<'_ATEOF'
+lib_LTLIBRARIES = lib2.la
+lib2_la_SOURCES = lib2.c
+lib2_la_LDFLAGS = -rpath $(libdir)
+lib2_la_LIBADD = -L=$(libdir) -l1
+_ATEOF
+
+
+cat >lib2/lib2.c <<'_ATEOF'
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+extern char *f(const char *s);
+char *g(const char *s)
+{
+  char *q = f(s);
+  puts (q);
+  return q;
+}
+_ATEOF
+
+
+cd lib2
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "sysroot.at:203"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "sysroot.at:203"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:203: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "sysroot.at:203"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "sysroot.at:203"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "sysroot.at:203"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "sysroot.at:203"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$MAKE install DESTDIR=\$sysroot"
+at_fn_check_prepare_dynamic "$MAKE install DESTDIR=$sysroot" "sysroot.at:203"
+( $at_check_trace; $MAKE install DESTDIR=$sysroot
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: test -f \$sysroot/\$prefix/lib/lib2.la"
+at_fn_check_prepare_dynamic "test -f $sysroot/$prefix/lib/lib2.la" "sysroot.at:203"
+( $at_check_trace; test -f $sysroot/$prefix/lib/lib2.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: grep -F \"\$sysroot\" \"\$sysroot/\$prefix/lib/lib2.la\""
+at_fn_check_prepare_dynamic "grep -F \"$sysroot\" \"$sysroot/$prefix/lib/lib2.la\"" "sysroot.at:203"
+( $at_check_trace; grep -F "$sysroot" "$sysroot/$prefix/lib/lib2.la"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ..
+
+# Build and install a program.
+cat >prog/configure.ac <<'_ATEOF'
+AC_INIT([prog], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([prog.c])
+LT_INIT
+sysroot=$with_sysroot
+AC_SUBST([sysroot])
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >prog/Makefile.am <<'_ATEOF'
+bin_PROGRAMS = prog
+prog_SOURCES = prog.c
+prog_LDADD = -L=$(libdir) -l2
+_ATEOF
+
+
+cat >prog/prog.c <<'_ATEOF'
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+extern char *g(const char *s);
+int main()
+{
+  char *q = g("hello world");
+  free (q);
+  return 0;
+}
+_ATEOF
+
+
+cd prog
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "sysroot.at:203"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "sysroot.at:203"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:203: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "sysroot.at:203"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "sysroot.at:203"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "sysroot.at:203"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "sysroot.at:203"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: \$MAKE install DESTDIR=\$sysroot"
+at_fn_check_prepare_dynamic "$MAKE install DESTDIR=$sysroot" "sysroot.at:203"
+( $at_check_trace; $MAKE install DESTDIR=$sysroot
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: test -f \$sysroot/\$prefix/bin/prog\$EXEEXT"
+at_fn_check_prepare_dynamic "test -f $sysroot/$prefix/bin/prog$EXEEXT" "sysroot.at:203"
+( $at_check_trace; test -f $sysroot/$prefix/bin/prog$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: grep -F \"\$sysroot\" \"\$sysroot/\$prefix/bin/prog\$EXEEXT\""
+at_fn_check_prepare_dynamic "grep -F \"$sysroot\" \"$sysroot/$prefix/bin/prog$EXEEXT\"" "sysroot.at:203"
+( $at_check_trace; grep -F "$sysroot" "$sysroot/$prefix/bin/prog$EXEEXT"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: grep \"'.*=\" \$sysroot/\$prefix/lib/lib2.la"
+at_fn_check_prepare_dynamic "grep \"'.*=\" $sysroot/$prefix/lib/lib2.la" "sysroot.at:203"
+( $at_check_trace; grep "'.*=" $sysroot/$prefix/lib/lib2.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: ./libtool --mode=finish \$sysroot/\$prefix/lib/lib[12].la"
+at_fn_check_prepare_dynamic "./libtool --mode=finish $sysroot/$prefix/lib/lib[12].la" "sysroot.at:203"
+( $at_check_trace; ./libtool --mode=finish $sysroot/$prefix/lib/lib[12].la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:203: grep \"'.*=\" \$sysroot/\$prefix/lib/lib[12].la"
+at_fn_check_prepare_dynamic "grep \"'.*=\" $sysroot/$prefix/lib/lib[12].la" "sysroot.at:203"
+( $at_check_trace; grep "'.*=" $sysroot/$prefix/lib/lib[12].la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:203"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# missing tests
+# 1) pass absolute .la files
+# 2) pass absolute -L
+# 2) pass relative .la files
+
+cd ..
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_124
+#AT_START_125
+at_fn_group_banner 125 'sysroot.at:204' \
+  "-L SYSROOT/.../lib -l" "                          " 21
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "125. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+gcc_sysroot=`$CC --print-sysroot 2> /dev/null`
+if test $? != 0; then
+  gcc_sysroot=
+fi
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: test -n \"\$gcc_sysroot\" || exit 77"
+at_fn_check_prepare_dynamic "test -n \"$gcc_sysroot\" || exit 77" "sysroot.at:204"
+( $at_check_trace; test -n "$gcc_sysroot" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Detect installation prefix for the compiler
+prefix=
+for i in crt0.o crt1.o crt2.o crti.o; do
+  j=`$CC --print-file-name $i 2> /dev/null`
+  test $? = 0 || continue
+  case "$j" in
+    $gcc_sysroot*/lib/$i)
+      prefix=`echo "$j" | sed "s,^$gcc_sysroot\\(.*\\)/lib/$i\$,\\1,"`
+      break ;;
+  esac
+done
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: test -n \"\$prefix\" || exit 77"
+at_fn_check_prepare_dynamic "test -n \"$prefix\" || exit 77" "sysroot.at:204"
+( $at_check_trace; test -n "$prefix" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+sysroot=`pwd`/sys-root
+
+# difficult to use AS_DIRNAME inside the AT_CHECK macro, so
+# encapsulate as a shell function.
+local_dirname() {
+  $as_dirname -- "$1" ||
+$as_expr X"$1" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$1" : 'X\(//\)[^/]' \| \
+	 X"$1" : 'X\(//\)$' \| \
+	 X"$1" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$1" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'
+}
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204:
+(cd \"\$gcc_sysroot\" && find \".\$prefix/bin\" \".\$prefix/include\" \".\$prefix/lib\" \\! -type d) | \\
+while read file; do
+  dir=\`local_dirname \"\$sysroot/\$file\"\`
+  test -d \"\$dir\" || mkdir -p \"\$dir\"
+  rm -f \"\$sysroot/\$file\"
+  ln -s \"\$gcc_sysroot/\$file\" \"\$sysroot/\$file\" || \\
+    cp \"\$gcc_sysroot/\$file\" \"\$sysroot/\$file\"
+done"
+at_fn_check_prepare_notrace 'a `...` command substitution' "sysroot.at:204"
+( $at_check_trace;
+(cd "$gcc_sysroot" && find ".$prefix/bin" ".$prefix/include" ".$prefix/lib" \! -type d) | \
+while read file; do
+  dir=`local_dirname "$sysroot/$file"`
+  test -d "$dir" || mkdir -p "$dir"
+  rm -f "$sysroot/$file"
+  ln -s "$gcc_sysroot/$file" "$sysroot/$file" || \
+    cp "$gcc_sysroot/$file" "$sysroot/$file"
+done
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+LDFLAGS="$LDFLAGS --sysroot=$sysroot -no-undefined"
+configure_options="$configure_options --with-sysroot=$sysroot --prefix=$prefix"
+
+#???
+if test "$shlibpath_var" = PATH; then
+  configure_options="$configure_options --libdir=/$prefix/bin"
+fi
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: mkdir lib1 lib2 prog"
+at_fn_check_prepare_trace "sysroot.at:204"
+( $at_check_trace; mkdir lib1 lib2 prog
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Build and install package 1.
+cat >lib1/configure.ac <<'_ATEOF'
+AC_INIT([lib1], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([lib1.c])
+LT_INIT
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >lib1/Makefile.am <<'_ATEOF'
+lib_LTLIBRARIES = lib1.la
+lib1_la_SOURCES = lib1.c
+lib1_la_LDFLAGS = -rpath $(libdir)
+_ATEOF
+
+
+cat >lib1/lib1.c <<'_ATEOF'
+#include <string.h>
+#include <stdlib.h>
+char *f(const char *s)
+{
+  return strdup (s);
+}
+_ATEOF
+
+
+cd lib1
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "sysroot.at:204"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "sysroot.at:204"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:204: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "sysroot.at:204"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "sysroot.at:204"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "sysroot.at:204"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "sysroot.at:204"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$MAKE install DESTDIR=\$sysroot"
+at_fn_check_prepare_dynamic "$MAKE install DESTDIR=$sysroot" "sysroot.at:204"
+( $at_check_trace; $MAKE install DESTDIR=$sysroot
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: test -f \"\$sysroot/\$prefix/lib/lib1.la\""
+at_fn_check_prepare_dynamic "test -f \"$sysroot/$prefix/lib/lib1.la\"" "sysroot.at:204"
+( $at_check_trace; test -f "$sysroot/$prefix/lib/lib1.la"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: grep -F \"\$sysroot\" \"\$sysroot/\$prefix/lib/lib1.la\""
+at_fn_check_prepare_dynamic "grep -F \"$sysroot\" \"$sysroot/$prefix/lib/lib1.la\"" "sysroot.at:204"
+( $at_check_trace; grep -F "$sysroot" "$sysroot/$prefix/lib/lib1.la"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ..
+
+# Build and install package 2.
+cat >lib2/configure.ac <<'_ATEOF'
+AC_INIT([lib2], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([lib2.c])
+LT_INIT
+sysroot=$with_sysroot
+AC_SUBST([sysroot])
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >lib2/Makefile.am <<'_ATEOF'
+lib_LTLIBRARIES = lib2.la
+lib2_la_SOURCES = lib2.c
+lib2_la_LDFLAGS = -rpath $(libdir)
+lib2_la_LIBADD = -L$(sysroot)$(libdir) -l1
+_ATEOF
+
+
+cat >lib2/lib2.c <<'_ATEOF'
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+extern char *f(const char *s);
+char *g(const char *s)
+{
+  char *q = f(s);
+  puts (q);
+  return q;
+}
+_ATEOF
+
+
+cd lib2
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "sysroot.at:204"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "sysroot.at:204"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:204: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "sysroot.at:204"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "sysroot.at:204"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "sysroot.at:204"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "sysroot.at:204"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$MAKE install DESTDIR=\$sysroot"
+at_fn_check_prepare_dynamic "$MAKE install DESTDIR=$sysroot" "sysroot.at:204"
+( $at_check_trace; $MAKE install DESTDIR=$sysroot
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: test -f \$sysroot/\$prefix/lib/lib2.la"
+at_fn_check_prepare_dynamic "test -f $sysroot/$prefix/lib/lib2.la" "sysroot.at:204"
+( $at_check_trace; test -f $sysroot/$prefix/lib/lib2.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: grep -F \"\$sysroot\" \"\$sysroot/\$prefix/lib/lib2.la\""
+at_fn_check_prepare_dynamic "grep -F \"$sysroot\" \"$sysroot/$prefix/lib/lib2.la\"" "sysroot.at:204"
+( $at_check_trace; grep -F "$sysroot" "$sysroot/$prefix/lib/lib2.la"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ..
+
+# Build and install a program.
+cat >prog/configure.ac <<'_ATEOF'
+AC_INIT([prog], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([prog.c])
+LT_INIT
+sysroot=$with_sysroot
+AC_SUBST([sysroot])
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >prog/Makefile.am <<'_ATEOF'
+bin_PROGRAMS = prog
+prog_SOURCES = prog.c
+prog_LDADD = -L$(sysroot)$(libdir) -l2
+_ATEOF
+
+
+cat >prog/prog.c <<'_ATEOF'
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+extern char *g(const char *s);
+int main()
+{
+  char *q = g("hello world");
+  free (q);
+  return 0;
+}
+_ATEOF
+
+
+cd prog
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "sysroot.at:204"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "sysroot.at:204"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:204: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "sysroot.at:204"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "sysroot.at:204"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "sysroot.at:204"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "sysroot.at:204"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: \$MAKE install DESTDIR=\$sysroot"
+at_fn_check_prepare_dynamic "$MAKE install DESTDIR=$sysroot" "sysroot.at:204"
+( $at_check_trace; $MAKE install DESTDIR=$sysroot
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: test -f \$sysroot/\$prefix/bin/prog\$EXEEXT"
+at_fn_check_prepare_dynamic "test -f $sysroot/$prefix/bin/prog$EXEEXT" "sysroot.at:204"
+( $at_check_trace; test -f $sysroot/$prefix/bin/prog$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: grep -F \"\$sysroot\" \"\$sysroot/\$prefix/bin/prog\$EXEEXT\""
+at_fn_check_prepare_dynamic "grep -F \"$sysroot\" \"$sysroot/$prefix/bin/prog$EXEEXT\"" "sysroot.at:204"
+( $at_check_trace; grep -F "$sysroot" "$sysroot/$prefix/bin/prog$EXEEXT"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: grep \"'.*=\" \$sysroot/\$prefix/lib/lib2.la"
+at_fn_check_prepare_dynamic "grep \"'.*=\" $sysroot/$prefix/lib/lib2.la" "sysroot.at:204"
+( $at_check_trace; grep "'.*=" $sysroot/$prefix/lib/lib2.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: ./libtool --mode=finish \$sysroot/\$prefix/lib/lib[12].la"
+at_fn_check_prepare_dynamic "./libtool --mode=finish $sysroot/$prefix/lib/lib[12].la" "sysroot.at:204"
+( $at_check_trace; ./libtool --mode=finish $sysroot/$prefix/lib/lib[12].la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:204: grep \"'.*=\" \$sysroot/\$prefix/lib/lib[12].la"
+at_fn_check_prepare_dynamic "grep \"'.*=\" $sysroot/$prefix/lib/lib[12].la" "sysroot.at:204"
+( $at_check_trace; grep "'.*=" $sysroot/$prefix/lib/lib[12].la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:204"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# missing tests
+# 1) pass absolute .la files
+# 2) pass absolute -L
+# 2) pass relative .la files
+
+cd ..
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_125
+#AT_START_126
+at_fn_group_banner 126 'sysroot.at:205' \
+  "SYSROOT/.../*.la" "                               " 21
+at_xfail=no
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+      test "$ACLOCAL" = no && at_xfail=yes
+      test "$AUTOMAKE" = no && at_xfail=yes
+      test "$AUTOCONF" = no && at_xfail=yes
+(
+  $as_echo "126. $at_setup_line: testing $at_desc ..."
+  $at_traceon
+
+
+
+gcc_sysroot=`$CC --print-sysroot 2> /dev/null`
+if test $? != 0; then
+  gcc_sysroot=
+fi
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: test -n \"\$gcc_sysroot\" || exit 77"
+at_fn_check_prepare_dynamic "test -n \"$gcc_sysroot\" || exit 77" "sysroot.at:205"
+( $at_check_trace; test -n "$gcc_sysroot" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Detect installation prefix for the compiler
+prefix=
+for i in crt0.o crt1.o crt2.o crti.o; do
+  j=`$CC --print-file-name $i 2> /dev/null`
+  test $? = 0 || continue
+  case "$j" in
+    $gcc_sysroot*/lib/$i)
+      prefix=`echo "$j" | sed "s,^$gcc_sysroot\\(.*\\)/lib/$i\$,\\1,"`
+      break ;;
+  esac
+done
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: test -n \"\$prefix\" || exit 77"
+at_fn_check_prepare_dynamic "test -n \"$prefix\" || exit 77" "sysroot.at:205"
+( $at_check_trace; test -n "$prefix" || exit 77
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+sysroot=`pwd`/sys-root
+
+# difficult to use AS_DIRNAME inside the AT_CHECK macro, so
+# encapsulate as a shell function.
+local_dirname() {
+  $as_dirname -- "$1" ||
+$as_expr X"$1" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$1" : 'X\(//\)[^/]' \| \
+	 X"$1" : 'X\(//\)$' \| \
+	 X"$1" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$1" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'
+}
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205:
+(cd \"\$gcc_sysroot\" && find \".\$prefix/bin\" \".\$prefix/include\" \".\$prefix/lib\" \\! -type d) | \\
+while read file; do
+  dir=\`local_dirname \"\$sysroot/\$file\"\`
+  test -d \"\$dir\" || mkdir -p \"\$dir\"
+  rm -f \"\$sysroot/\$file\"
+  ln -s \"\$gcc_sysroot/\$file\" \"\$sysroot/\$file\" || \\
+    cp \"\$gcc_sysroot/\$file\" \"\$sysroot/\$file\"
+done"
+at_fn_check_prepare_notrace 'a `...` command substitution' "sysroot.at:205"
+( $at_check_trace;
+(cd "$gcc_sysroot" && find ".$prefix/bin" ".$prefix/include" ".$prefix/lib" \! -type d) | \
+while read file; do
+  dir=`local_dirname "$sysroot/$file"`
+  test -d "$dir" || mkdir -p "$dir"
+  rm -f "$sysroot/$file"
+  ln -s "$gcc_sysroot/$file" "$sysroot/$file" || \
+    cp "$gcc_sysroot/$file" "$sysroot/$file"
+done
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+LDFLAGS="$LDFLAGS --sysroot=$sysroot -no-undefined"
+configure_options="$configure_options --with-sysroot=$sysroot --prefix=$prefix"
+
+#???
+if test "$shlibpath_var" = PATH; then
+  configure_options="$configure_options --libdir=/$prefix/bin"
+fi
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: mkdir lib1 lib2 prog"
+at_fn_check_prepare_trace "sysroot.at:205"
+( $at_check_trace; mkdir lib1 lib2 prog
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# Build and install package 1.
+cat >lib1/configure.ac <<'_ATEOF'
+AC_INIT([lib1], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([lib1.c])
+LT_INIT
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >lib1/Makefile.am <<'_ATEOF'
+lib_LTLIBRARIES = lib1.la
+lib1_la_SOURCES = lib1.c
+lib1_la_LDFLAGS = -rpath $(libdir)
+_ATEOF
+
+
+cat >lib1/lib1.c <<'_ATEOF'
+#include <string.h>
+#include <stdlib.h>
+char *f(const char *s)
+{
+  return strdup (s);
+}
+_ATEOF
+
+
+cd lib1
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "sysroot.at:205"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "sysroot.at:205"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:205: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "sysroot.at:205"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "sysroot.at:205"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "sysroot.at:205"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "sysroot.at:205"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$MAKE install DESTDIR=\$sysroot"
+at_fn_check_prepare_dynamic "$MAKE install DESTDIR=$sysroot" "sysroot.at:205"
+( $at_check_trace; $MAKE install DESTDIR=$sysroot
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: test -f \"\$sysroot/\$prefix/lib/lib1.la\""
+at_fn_check_prepare_dynamic "test -f \"$sysroot/$prefix/lib/lib1.la\"" "sysroot.at:205"
+( $at_check_trace; test -f "$sysroot/$prefix/lib/lib1.la"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: grep -F \"\$sysroot\" \"\$sysroot/\$prefix/lib/lib1.la\""
+at_fn_check_prepare_dynamic "grep -F \"$sysroot\" \"$sysroot/$prefix/lib/lib1.la\"" "sysroot.at:205"
+( $at_check_trace; grep -F "$sysroot" "$sysroot/$prefix/lib/lib1.la"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ..
+
+# Build and install package 2.
+cat >lib2/configure.ac <<'_ATEOF'
+AC_INIT([lib2], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([lib2.c])
+LT_INIT
+sysroot=$with_sysroot
+AC_SUBST([sysroot])
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >lib2/Makefile.am <<'_ATEOF'
+lib_LTLIBRARIES = lib2.la
+lib2_la_SOURCES = lib2.c
+lib2_la_LDFLAGS = -rpath $(libdir)
+lib2_la_LIBADD = $(sysroot)$(libdir)/lib1.la
+_ATEOF
+
+
+cat >lib2/lib2.c <<'_ATEOF'
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+extern char *f(const char *s);
+char *g(const char *s)
+{
+  char *q = f(s);
+  puts (q);
+  return q;
+}
+_ATEOF
+
+
+cd lib2
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "sysroot.at:205"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "sysroot.at:205"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:205: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "sysroot.at:205"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "sysroot.at:205"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "sysroot.at:205"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "sysroot.at:205"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$MAKE install DESTDIR=\$sysroot"
+at_fn_check_prepare_dynamic "$MAKE install DESTDIR=$sysroot" "sysroot.at:205"
+( $at_check_trace; $MAKE install DESTDIR=$sysroot
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: test -f \$sysroot/\$prefix/lib/lib2.la"
+at_fn_check_prepare_dynamic "test -f $sysroot/$prefix/lib/lib2.la" "sysroot.at:205"
+( $at_check_trace; test -f $sysroot/$prefix/lib/lib2.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: grep -F \"\$sysroot\" \"\$sysroot/\$prefix/lib/lib2.la\""
+at_fn_check_prepare_dynamic "grep -F \"$sysroot\" \"$sysroot/$prefix/lib/lib2.la\"" "sysroot.at:205"
+( $at_check_trace; grep -F "$sysroot" "$sysroot/$prefix/lib/lib2.la"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+cd ..
+
+# Build and install a program.
+cat >prog/configure.ac <<'_ATEOF'
+AC_INIT([prog], [1.0])
+AM_INIT_AUTOMAKE([foreign])
+AC_PROG_CC
+AC_CONFIG_SRCDIR([prog.c])
+LT_INIT
+sysroot=$with_sysroot
+AC_SUBST([sysroot])
+AC_OUTPUT(Makefile)
+_ATEOF
+
+
+cat >prog/Makefile.am <<'_ATEOF'
+bin_PROGRAMS = prog
+prog_SOURCES = prog.c
+prog_LDADD = $(sysroot)$(libdir)/lib2.la
+_ATEOF
+
+
+cat >prog/prog.c <<'_ATEOF'
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+extern char *g(const char *s);
+int main()
+{
+  char *q = g("hello world");
+  free (q);
+  return 0;
+}
+_ATEOF
+
+
+cd prog
+$LIBTOOLIZE
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$ACLOCAL -I \$abs_top_srcdir/libltdl/m4"
+at_fn_check_prepare_dynamic "$ACLOCAL -I $abs_top_srcdir/libltdl/m4" "sysroot.at:205"
+( $at_check_trace; $ACLOCAL -I $abs_top_srcdir/libltdl/m4
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$AUTOMAKE --add-missing"
+at_fn_check_prepare_dynamic "$AUTOMAKE --add-missing" "sysroot.at:205"
+( $at_check_trace; $AUTOMAKE --add-missing
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; tee stderr <"$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+if $at_failed; then :
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:205: grep 'require .*but have' stderr && (exit 77)"
+at_fn_check_prepare_trace "sysroot.at:205"
+( $at_check_trace; grep 'require .*but have' stderr && (exit 77)
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+fi
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$AUTOCONF "
+at_fn_check_prepare_dynamic "$AUTOCONF " "sysroot.at:205"
+( $at_check_trace; $AUTOCONF
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: : \${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  \$CONFIG_SHELL ./configure \$configure_options "
+at_fn_check_prepare_notrace 'a ${...} parameter expansion' "sysroot.at:205"
+( $at_check_trace; : ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; 	  $CONFIG_SHELL ./configure $configure_options
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+for target in all
+do
+  { set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$unset LIBTOOL LIBTOOLIZE; \$MAKE \$target "
+at_fn_check_prepare_dynamic "$unset LIBTOOL LIBTOOLIZE; $MAKE $target " "sysroot.at:205"
+( $at_check_trace; $unset LIBTOOL LIBTOOLIZE; $MAKE $target
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+done
+
+
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: \$MAKE install DESTDIR=\$sysroot"
+at_fn_check_prepare_dynamic "$MAKE install DESTDIR=$sysroot" "sysroot.at:205"
+( $at_check_trace; $MAKE install DESTDIR=$sysroot
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+echo stderr:; cat "$at_stderr"
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: test -f \$sysroot/\$prefix/bin/prog\$EXEEXT"
+at_fn_check_prepare_dynamic "test -f $sysroot/$prefix/bin/prog$EXEEXT" "sysroot.at:205"
+( $at_check_trace; test -f $sysroot/$prefix/bin/prog$EXEEXT
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: grep -F \"\$sysroot\" \"\$sysroot/\$prefix/bin/prog\$EXEEXT\""
+at_fn_check_prepare_dynamic "grep -F \"$sysroot\" \"$sysroot/$prefix/bin/prog$EXEEXT\"" "sysroot.at:205"
+( $at_check_trace; grep -F "$sysroot" "$sysroot/$prefix/bin/prog$EXEEXT"
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: grep \"'.*=\" \$sysroot/\$prefix/lib/lib2.la"
+at_fn_check_prepare_dynamic "grep \"'.*=\" $sysroot/$prefix/lib/lib2.la" "sysroot.at:205"
+( $at_check_trace; grep "'.*=" $sysroot/$prefix/lib/lib2.la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: ./libtool --mode=finish \$sysroot/\$prefix/lib/lib[12].la"
+at_fn_check_prepare_dynamic "./libtool --mode=finish $sysroot/$prefix/lib/lib[12].la" "sysroot.at:205"
+( $at_check_trace; ./libtool --mode=finish $sysroot/$prefix/lib/lib[12].la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+echo stdout:; cat "$at_stdout"
+at_fn_check_status 0 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+{ set +x
+$as_echo "$at_srcdir/sysroot.at:205: grep \"'.*=\" \$sysroot/\$prefix/lib/lib[12].la"
+at_fn_check_prepare_dynamic "grep \"'.*=\" $sysroot/$prefix/lib/lib[12].la" "sysroot.at:205"
+( $at_check_trace; grep "'.*=" $sysroot/$prefix/lib/lib[12].la
+) >>"$at_stdout" 2>>"$at_stderr"
+at_status=$? at_failed=false
+$at_check_filter
+at_fn_diff_devnull "$at_stderr" || at_failed=:
+at_fn_diff_devnull "$at_stdout" || at_failed=:
+at_fn_check_status 1 $at_status "$at_srcdir/sysroot.at:205"
+$at_failed && at_fn_log_failure
+$at_traceon; }
+
+
+# missing tests
+# 1) pass absolute .la files
+# 2) pass absolute -L
+# 2) pass relative .la files
+
+cd ..
+  set +x
+  $at_times_p && times >"$at_times_file"
+) 5>&1 2>&1 7>&- | eval $at_tee_pipe
+read at_status <"$at_status_file"
+#AT_STOP_126
diff --git a/tests/testsuite.at b/tests/testsuite.at
new file mode 100644
index 0000000..c450e10
--- /dev/null
+++ b/tests/testsuite.at
@@ -0,0 +1,467 @@
+# Process with autom4te to create an -*- Autotest -*- test suite.
+#
+#   Copyright (C) 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+#   Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+m4_divert_push([PREPARE_TESTS])dnl
+: ${tst_dist=dist}
+: ${ACLOCAL=aclocal}
+: ${AUTOHEADER=autoheader}
+: ${AUTOCONF=autoconf}
+: ${AUTOMAKE=automake}
+: ${AUTORECONF=autoreconf}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${ECHO=$as_echo}
+for tool in ACLOCAL AUTOHEADER AUTOCONF AUTOMAKE AUTORECONF; do
+  if eval \$$tool --version >/dev/null 2>&1; then :; else eval $tool=no; fi
+done
+export ACLOCAL AUTOHEADER AUTOCONF AUTOMAKE AUTORECONF
+eval `$LIBTOOL --config | grep '^EGREP='`
+eval `$LIBTOOL --config | $EGREP '^(host|host_os|host_alias|build|build_alias|to_host_file_cmd|to_tool_file_cmd)='`
+configure_options=--prefix=/nonexistent
+if test -n "$host_alias"; then
+  configure_options="$configure_options --host $host_alias"
+fi
+if test -n "$build_alias"; then
+  configure_options="$configure_options --build $build_alias"
+fi
+if test -n "$to_host_file_cmd"; then
+  configure_options="$configure_options lt_cv_to_host_file_cmd=$to_host_file_cmd"
+fi
+if test -n "$to_tool_file_cmd"; then
+  configure_options="$configure_options lt_cv_to_tool_file_cmd=$to_tool_file_cmd"
+fi
+if (FOO=bar; unset FOO) >/dev/null 2>&1; then
+  unset=unset
+else
+  unset=false
+fi
+: ${mkdir_p="$abs_top_srcdir/libltdl/config/install-sh -d"}
+# Fix relative paths in $lt_INSTALL
+case $lt_INSTALL in
+  *libltdl/config/install-sh*)
+    lt_INSTALL=$abs_top_srcdir/libltdl/config/install-sh
+    ;;
+esac
+
+# Unset some MAKE... variables that may cause $MAKE to act like a
+# recursively invoked sub-make.  Any $MAKE invocation in a test is
+# conceptually an independent invocation.
+unset MFLAGS MAKEFLAGS MAKELEVEL __MKLVL__ MAKE_JOBS_FIFO
+
+# On AIX, shared libraries remain loaded in memory after use if they
+# are world-readable, until root issues slibclean.  On NFS, this causes
+# a testsuite rerun to fail to clean up test group directories.  Avoid
+# this with a suitable umask.  Do not do this on other systems, for
+# example HP-UX suffers unless shared libraries are mode 555.
+case $host_os in
+aix*) umask o-rwx ;;
+esac
+m4_divert_pop([PREPARE_TESTS])dnl
+
+
+# LT_AT_LIBTOOLIZE([ARGS])
+# ------------------------
+m4_define([LT_AT_LIBTOOLIZE],
+[$LIBTOOLIZE $1
+AT_KEYWORDS([libtoolize])
+])
+
+
+# _LIBTOOLIZE_TRANSFORM(FILE)
+# ---------------------------
+# Fix the expected output of installed libtoolize in presence of --program-*.
+m4_define([_LIBTOOLIZE_TRANSFORM],
+[lt_name=`$ECHO "$LIBTOOLIZE" | sed "s,^.*/,,"`
+sed "s/libtoolize/$lt_name/g
+s|/usr/local/share/aclocal/|${tst_aclocaldir-$abs_top_srcdir/libltdl/m4}/|" < $1 > $1.t
+mv -f $1.t $1
+])dnl
+
+
+# LT_AT_CHECK_LIBTOOLIZE(ARGS, [EXIT-STATUS = 0], [STDOUT = `'], [STDERR = `'])
+# -----------------------------------------------------------------------------
+m4_define([LT_AT_CHECK_LIBTOOLIZE],
+[m4_if([$3], [expout], [_LIBTOOLIZE_TRANSFORM([$3])])dnl
+m4_if([$4], [experr], [_LIBTOOLIZE_TRANSFORM([$4])])dnl
+AT_CHECK([LT_AT_LIBTOOLIZE([$1])],
+  [$2], [$3], [$4])
+])
+
+
+# LT_AT_ACLOCAL([OPTIONS])
+# --------------------------
+m4_define([LT_AT_ACLOCAL],
+[AT_CHECK([$ACLOCAL $1], [0], [ignore], [ignore])
+AT_XFAIL_IF([test "$ACLOCAL" = no])
+AT_KEYWORDS([automake])
+])
+
+
+# LT_AT_AUTOCONF([OPTIONS])
+# --------------------------
+m4_define([LT_AT_AUTOCONF],
+[AT_CHECK([$AUTOCONF $1], [0], [ignore], [ignore])
+AT_XFAIL_IF([test "$AUTOCONF" = no])
+AT_KEYWORDS([autoconf])
+])
+
+
+# LT_AT_AUTOMAKE([OPTIONS])
+# --------------------------
+m4_define([LT_AT_AUTOMAKE],
+[AT_CHECK([$AUTOMAKE $1], [0], [ignore], [stderr],
+  [AT_CHECK([grep 'require .*but have' stderr && (exit 77)], [1])])
+AT_XFAIL_IF([test "$AUTOMAKE" = no])
+AT_KEYWORDS([automake])
+])
+
+
+# LT_AT_AUTOHEADER([OPTIONS])
+# ---------------------------
+m4_define([LT_AT_AUTOHEADER],
+[AT_CHECK([$AUTOHEADER $1], [0], [ignore], [ignore])
+AT_XFAIL_IF([test "$AUTOHEADER" = no])
+AT_KEYWORDS([autoconf])
+])
+
+
+# LT_AT_AUTORECONF([OPTIONS])
+# --------------------------
+m4_define([LT_AT_AUTORECONF],
+[AT_CHECK([$AUTORECONF $1], [0], [ignore], [stderr],
+  [AT_CHECK([grep 'require .*but have' stderr && (exit 77)], [1])])
+AT_XFAIL_IF(
+  [case ,$AUTORECONF,$AUTOCONF,$AUTOHEADER,$ACLOCAL,$AUTOMAKE, in *,no,*) :;; *) false;; esac])
+AT_KEYWORDS([autoconf automake])
+])
+
+
+# LT_AT_CONFIGURE([OPTIONS], [CONFIGURE-SCRIPT])
+# ----------------------------------------------
+# Configure CONFIGURE-SCRIPT, defaulting to ./configure, with
+# additional OPTIONS.
+m4_define([LT_AT_CONFIGURE],
+[AT_CHECK([: ${CONFIG_SHELL=/bin/sh}; export CONFIG_SHELL; ]dnl
+	  [$CONFIG_SHELL m4_default([$2], [./configure]) $configure_options $1],
+	  [0], [ignore], [ignore])
+])
+
+
+# LT_AT_MAKE([TGTS], [VARS])
+# --------------------------
+m4_define([LT_AT_MAKE],
+[for target in m4_default([$1], [all])
+do
+  AT_CHECK([$unset LIBTOOL LIBTOOLIZE; $MAKE $target $2], [0], [ignore], [ignore])
+done
+])
+
+
+# LT_AT_BOOTSTRAP([LIBTOOLIZE-ARGS], [ACLOCAL-ARGS], [AUTOHEADER-ARGS],
+#	[AUTOMAKE-ARGS], [AUTOCONF-ARGS], [CONFIGURE-ARGS], [MAKE-ARGS])
+# ----------------------------------------------------------------------
+m4_define([LT_AT_BOOTSTRAP],
+[m4_if([$1], [ignore], [], [LT_AT_LIBTOOLIZE([$1])])
+m4_if([$2], [ignore], [], [LT_AT_ACLOCAL([$2])])
+m4_if([$3], [ignore], [], [LT_AT_AUTOHEADER([$3])])
+m4_if([$4], [ignore], [], [LT_AT_AUTOMAKE([$4])])
+m4_if([$5], [ignore], [], [LT_AT_AUTOCONF([$5])])
+m4_if([$6], [ignore], [], [LT_AT_CONFIGURE([$6])])
+m4_if([$7], [ignore], [], [LT_AT_MAKE([$7])])
+])
+
+
+# LT_ESCAPE(ARG)
+# --------------
+# Escape command for output (expand only parameters).
+m4_define([LT_ESCAPE],
+[m4_bpatsubst([$1],
+	     m4_dquote(m4_default([$2], [\"`])),
+	     [\\\&])])
+
+
+# LT_AT_CHECK
+# -----------
+# Wrapper around AT_CHECK that outputs the command first, with
+# parameters expanded.
+m4_define([LT_AT_CHECK],
+[echo "LT_ESCAPE([$1])"; AT_CHECK($@)])
+
+
+# LT_AT_HOST_DATA(FILE, CONTENTS)
+# -------------------------------
+# Ensure correct line ending for expected output of host executables.
+m4_define([LT_AT_HOST_DATA],
+[AT_DATA([$1], [$2])
+case $host_os in mingw*)
+  while read -r l; do printf "%s\r\n" "$l"; done < $1 > $1.t
+  mv -f $1.t $1 ;;
+esac])
+
+
+# LT_AT_UNIFY_NL(FILE, [RESULT-FILE])
+# -----------------------------------
+# Ensure (text) FILE has predictable line endings.
+# If RESULT-FILE is given, FILE is left untouched. If not, convert in-place.
+m4_define([LT_AT_UNIFY_NL],
+[case $host_os in
+  mingw*)
+    tr -d '\015' < $1 > m4_ifval([$2], [$2], [$1.t
+    mv -f $1.t $1]) ;; m4_ifval([$2], [
+  *)
+    cp $1 $2 ;;])
+esac])
+
+
+# LT_AT_NORMALIZE_COMPILER_OUTPUT(FILE, [RESULT-FILE])
+# ----------------------------------------------------
+# Normalize differences in compiler output stemming from, e.g.,
+# - distcc process numbers,
+# - ccache file location,
+# - newline encoding,
+# - location of the libtool script,
+# - error messages involving unstable temporary file names.
+m4_define([LT_AT_NORMALIZE_COMPILER_OUTPUT],
+[_ltbase=`$ECHO "$LIBTOOL" | sed 's,^.*/,,'`
+[sed "/^distcc\[[0-9]*\]/d
+      /^$_ltbase: compile/d
+      s/\(tmp\/\{1,\}cc\)\([a-zA-Z0-9_]\{1,\}\)/\1-normalized-tmpname/g" < $1 > $1.t]
+LT_AT_UNIFY_NL([$1.t], [m4_default([$2], [$1])])[]dnl
+])
+
+
+# LT_AT_EXEC_CHECK(EXECUTABLE, [STATUS = 0], [STDOUT], [STDERR],
+#		   [ARGS-OR-STATUS-ADJUST])
+# --------------------------------------------------------------
+# Run EXECUTABLE ARGS-OR-STATUS-ADJUST.  STATUS, STDOUT, and STDERR are
+# handled as in AT_CHECK.
+# However, if we are cross-compiling, then SKIP instead of FAIL.
+# ARGS-OR-STATUS-ADJUST can also contain code like `|| (exit 1)'
+# to unify different possible exit status values.
+m4_define([LT_AT_EXEC_CHECK],
+[lt_exe=$1; if test -f "$1$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+AT_CHECK([if "$lt_exe" $5; then :; else lt_status=$?; ]dnl
+	 [  m4_ifval([$2], [test $lt_status != $2 && ])]dnl
+	 [  test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; ]dnl
+	 [  exit $lt_status; fi],[$2],[$3],[$4])
+])
+
+
+# LT_AT_NOINST_EXEC_CHECK(EXECUTABLE, [NOINST-MODULES],
+#			  [STATUS = 0], [STDOUT], [STDERR],
+#			  [ARGS-OR-STATUS-ADJUST])
+# ---------------------------------------------------------
+# Run EXECUTABLE ARGS-OR-STATUS-ADJUST using `libtool --mode=execute'
+# with `-dlopen' arguments in NOINST_MODULES.  STATUS, STDOUT, and
+# STDERR are handled as in AT_CHECK.
+# However, if we are cross-compiling, then SKIP instead of FAIL.
+# ARGS-OR-STATUS-ADJUST can also contain code like `|| (exit 1)'
+# to unify different possible exit status values.
+m4_define([LT_AT_NOINST_EXEC_CHECK],
+[lt_exe=$1; if test -f "$1$EXEEXT"; then lt_exe=$lt_exe$EXEEXT; fi
+AT_CHECK([if $LIBTOOL --mode=execute $2 "$lt_exe" $6; then :; else lt_status=$?; ]dnl
+	 [  m4_ifval([$3], [test $lt_status != $3 && ])]dnl
+	 [  test "X$host" != "X$build" && test -x "$lt_exe" && exit 77; ]dnl
+	 [  exit $lt_status; fi],[$3],[$4],[$5])
+])
+
+
+# LT_AT_TAG(TAG)
+# --------------
+# Declare that the language TAG will be used in this test.
+# Skips the test if the compiler is apparently not functional.
+m4_define([LT_AT_TAG],
+[AT_KEYWORDS([$1])
+AT_CHECK([{ test -n "[$]$1" && test "X[$]$1" != Xno; } || (exit 77)])
+m4_case([$1],
+  [CXX],
+  [AT_CHECK([test "X$CXX" != Xg++ || (g++ -v >/dev/null 2>&1) || (exit 77)])],
+  [GCJ],
+  [# There are just too many broken gcj installations out there, either missing
+   # libgcj.spec or unable to find it.  Skip the test for them.
+   AT_DATA([gcj_test.java],
+[[public class gcj_test {
+    public static void main(String[] argv) { }
+  }
+]])
+   AT_CHECK([$GCJ $GCJFLAGS -c gcj_test.java || exit 77],
+	    [], [ignore], [ignore])])
+])
+
+
+# LT_AT_EXEC_TAG([TAG])
+# ---------------------
+# Declare that the language TAG will be used and compiled programs may be run.
+# Skips the test if the compiler is apparently not functional.
+m4_define([LT_AT_EXEC_TAG],
+[LT_AT_TAG([$1])
+m4_case([$1],
+  [GCJ],
+  [AT_CHECK([$GCJ $GCJFLAGS --main=gcj_test -o gcj_test$EXEEXT gcj_test.java ]dnl
+	    [|| exit 77], [], [ignore], [ignore])
+   AT_CHECK([./gcj_test$EXEEXT || exit 77], [], [ignore], [ignore])])
+])
+
+
+# LT_AT_MVDIR(SRC, DEST)
+# ----------------------
+# Move contents of a directory recursively.
+# Avoid `mv DIR ...' due to issues with non-deletable shared libraries
+# on AIX on NFS mounts.  We cannot use slibclean as non-superuser.
+m4_define([LT_AT_MVDIR],
+[$mkdir_p $2
+(cd $1 && find . -type d) | (cd $2 && xargs $mkdir_p)
+for file in `cd $1 && find . -type f -print -o -type l -print`
+do
+  mv $1/$file $2/$file
+done
+rm -rf $1
+])
+
+## ------------------------------- ##
+## Files for a small ltdl project. ##
+## ------------------------------- ##
+
+# _LTDL_PROJECT_FILES([LTDL-DIR])
+# -------------------------------
+# LTDL-DIR is needed to generate a correct Makefile.  If the argument
+# is omitted, then no Makefile is created.
+m4_define([_LTDL_PROJECT_FILES],
+[AT_DATA([module.c],
+[[#ifdef __cplusplus
+extern "C"
+#endif
+const char *
+hello (void)
+{
+  return "Hello!";
+}
+]])
+
+AT_DATA([main.c],
+[[#include <stdio.h>
+#include "ltdl.h"
+
+int
+main ()
+{
+  lt_dlhandle module;
+  const char *(*func) (void) = 0;
+  int status = 1;
+
+  LTDL_SET_PRELOADED_SYMBOLS();
+  if (lt_dlinit() != 0) {
+    fprintf (stderr, "error during initialisation: %s\n", lt_dlerror());
+    return 1;
+  }
+
+  module = lt_dlopen("./module.la");
+  if (!module) {
+    fprintf (stderr, "error dlopening ./module.la: %s\n", lt_dlerror());
+    goto finish;
+  }
+
+  func = (const char *(*)(void)) lt_dlsym (module, "hello");
+  if (!func) {
+    fprintf (stderr, "error fetching func: %s\n", lt_dlerror());
+    goto finish;
+  }
+
+  printf ("%s\n", (*func) ());
+  status = 0;
+
+finish:
+  if (lt_dlexit() != 0) {
+    fprintf (stderr, "error during finalisation: %s\n", lt_dlerror());
+    status = 1;
+  }
+
+  return status;
+}
+]])
+
+m4_pushdef([_ARG_DIR], m4_bpatsubst([$1], [/*$]))
+m4_ifval([$1],
+[AT_DATA([Makefile],
+[[top_builddir	= .
+LIBTOOL		= ./]_ARG_DIR[/libtool
+INCLUDES	= -I./]_ARG_DIR[
+MODFLAGS	= -module -avoid-version -no-undefined
+
+LTCOMPILE = $(LIBTOOL) --tag=CC $(LIBTOOLFLAGS) --mode=compile \
+        $(CC) $(INCLUDES) $(CPPFLAGS) $(CFLAGS)
+LTLINK    = $(LIBTOOL) --tag=CC $(LIBTOOLFLAGS) --mode=link \
+        $(CC) $(CFLAGS) $(LDFLAGS)
+
+TARGETS		= ]_ARG_DIR[/libltdlc.la module.la ltdldemo$(EXEEXT)
+
+all: $(TARGETS)
+
+]_ARG_DIR[/libltdlc.la: $(LIBTOOL) ]_ARG_DIR[/Makefile
+	MAKE='$(MAKE)'; test -n "$$MAKE" || MAKE=make; \
+	cd ]_ARG_DIR[ && $$MAKE CC="$(CC)" LIBTOOLFLAGS="$(LIBTOOLFLAGS)" \
+	  CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" LDFLAGS="$(LDFLAGS)" \
+          CONFIGURE_OPTIONS="$(CONFIGURE_OPTIONS)"
+
+$(LIBTOOL): ]_ARG_DIR[/Makefile
+
+]_ARG_DIR[/Makefile:
+	cd ]_ARG_DIR[ && CONFIG_SHELL="$(SHELL)" $(SHELL) ./configure $(CONFIGURE_OPTIONS)
+
+ltdldemo$(EXEEXT): $(LIBTOOL) module.la ]_ARG_DIR[/libltdlc.la main.lo
+	$(LTLINK) -o ltdldemo$(EXEEXT) main.lo -dlopen module.la ./]_ARG_DIR[/libltdlc.la
+
+main.lo: $(LIBTOOL) main.c
+	$(LTCOMPILE) -c main.c
+
+module.la: $(LIBTOOL) module.lo
+	$(LTLINK) -o module.la module.lo $(MODFLAGS) -rpath /dev/null
+
+module.lo: $(LIBTOOL) module.c
+	$(LTCOMPILE) -c module.c
+]])
+cat >> Makefile <<EOF
+SHELL = $SHELL 
+EOF
+])
+m4_popdef([_ARG_DIR])
+])# _LTDL_PROJECT_FILES
+
+
+# We use `dnl' in zillions of places...
+m4_pattern_allow([^dnl$])
+
+# We exercise these tools.
+dnl AT_TESTED([grep autoreconf autom4te automake])
+
+# Enable colored output if available.
+m4_ifdef([AT_COLOR_TESTS], [AT_COLOR_TESTS])
+
+AT_INIT
+
+## ----------- ##
+## The suite.  ##
+## ----------- ##
+
+# Tests will be appended here by the Makefile rule.
diff --git a/tests/versioning.at b/tests/versioning.at
new file mode 100644
index 0000000..1d75f62
--- /dev/null
+++ b/tests/versioning.at
@@ -0,0 +1,238 @@
+# versioning.at -- test libtool versioning           -*- Autotest -*-
+#
+#   Copyright (C) 2009, 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([versioning])
+AT_KEYWORDS([libtool])
+
+eval "`$LIBTOOL --config | $EGREP '^(objdir|host_os)='`"
+
+# Setup some library and program sources:
+# a library (a1), a new revision (a2), a compatible update (a3),
+# an incompatible update (a4).
+# Another library (libb) using liba, and a couple of programs,
+# using liba directly and indirectly through libb.
+
+AT_DATA([liba1.c], [[
+int a (void)
+{
+  return 0;
+}
+]])
+
+AT_DATA([liba2.c], [[
+/* The internal detail should be static.  It isn't static in this test,
+   so we can later find out that it's this revision of the library. */
+int internal_detail = 42;
+int a (void)
+{
+  return internal_detail - 42;
+}
+]])
+
+AT_DATA([liba3.c], [[
+int a (void)
+{
+  return 0;
+}
+int aa (void)
+{
+  return 0;
+}
+]])
+
+AT_DATA([liba4.c], [[
+int aa (void)
+{
+  return 0;
+}
+]])
+
+AT_DATA([libb.c], [[
+extern int a (void);
+int b (void)
+{
+  return a ();
+}
+]])
+
+AT_DATA([prog1.c], [[
+extern int a (void);
+int main (void)
+{
+  return a ();
+}
+]])
+
+AT_DATA([prog2.c], [[
+extern int b (void);
+int main (void)
+{
+  return b ();
+}
+]])
+
+
+inst=`pwd`/inst
+libdir=$inst/lib
+bindir=$inst/bin
+LDFLAGS="$LDFLAGS -no-undefined"
+mkdir $inst $libdir $bindir
+
+for file in liba1.c liba2.c liba3.c liba4.c libb.c; do
+  $LIBTOOL --mode=compile $CC $CPPFLAGS $CFLAGS -c $file
+done
+for file in prog1.c prog2.c; do
+  $CC $CPPFLAGS $CFLAGS -c $file
+done
+
+# Setup is finished here.
+
+# Hypothesis: -version-info is ignored for convenience archives.
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo ]dnl
+	 [-version-info 0:0:0], [], [ignore], [stderr])
+AT_CHECK([grep 'version-info.*ignored for convenience' stderr], [], [ignore])
+
+# Hypothesis: the deprecated -version-number works.
+# Be sure not to use zero here, it's not portable.
+for version_number in 1 1:1 2:1 1:1:1 3:2:1; do
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo ]dnl
+	   [-version-number $version_number -rpath $libdir], [], [ignore], [ignore])
+done
+
+# Hypothesis: -version-info can be passed kinds of values, esp. zero ones
+# and large ones.
+# TODO: check something like 1001:2419:189 after fixing issues
+# for `version_type's of `irix', `nonstopux', or `osf'.
+for version_info in 1 1:2 0:0:0 1:1:1 13:241:7; do
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo ]dnl
+	   [-version-info $version_info -rpath $libdir], [], [ignore], [ignore])
+done
+
+# Hypothesis: we diagnose when AGE is higher than CURRENT.
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo ]dnl
+	 [-version-info 1:3:2 -rpath $libdir], [1], [ignore], [stderr])
+AT_CHECK([grep 'AGE.*is greater than' stderr], [], [ignore])
+
+# Hypothesis: we diagnose invalid values.
+for version_info in 1:2:3:4 -1 0:-1 0:0:-1; do
+  AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo ]dnl
+	   [-version-info $version_info -rpath $libdir], [1], [ignore], [ignore])
+done
+
+
+# Now, create an original version of the library and associated users.
+# This setup will be reused for further hypotheses below, and these
+# functions will be used to test working programs.
+
+test_uninstalled ()
+{
+  # temporarily move installed libraries out of the way in order to avoid
+  # skewing test results:
+  mv $libdir temp-lib
+  mv $bindir temp-bin
+  LT_AT_EXEC_CHECK([./prog1])
+  LT_AT_EXEC_CHECK([./prog2])
+  mv temp-lib $libdir
+  mv temp-bin $bindir
+}
+
+test_installed ()
+{
+  # temporarily move uninstalled libraries out of the way in order to avoid
+  # skewing test results:
+  mv $objdir temp
+  LT_AT_EXEC_CHECK([$bindir/prog1])
+  LT_AT_EXEC_CHECK([$bindir/prog2])
+  mv temp $objdir
+}
+
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba1.lo ]dnl
+	 [-version-info 0:0:0 -rpath $libdir], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o libb.la libb.lo liba.la ]dnl
+	 [-version-info 0:0:0 -rpath $libdir], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o prog1$EXEEXT prog1.$OBJEXT ]dnl
+	 [liba.la], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o prog2$EXEEXT prog2.$OBJEXT ]dnl
+	 [libb.la], [], [ignore], [ignore])
+test_uninstalled
+AT_CHECK([$LIBTOOL --mode=install cp liba.la libb.la $libdir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=install cp prog1$EXEEXT prog2$EXEEXT $bindir],
+	 [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=clean rm -f liba.la], [], [ignore], [ignore])
+test_installed
+AT_CHECK([$LIBTOOL --mode=uninstall rm -f $libdir/liba.la], [], [ignore], [ignore])
+
+
+# Hypothesis: library revision updates do not require (uninstalled
+# nor installed) programs or libraries to be relinked.
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba2.lo ]dnl
+	 [-version-info 0:1:0 -rpath $libdir], [], [ignore], [ignore])
+test_uninstalled
+AT_CHECK([$LIBTOOL --mode=install cp liba.la $libdir], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=clean rm -f liba.la], [], [ignore], [ignore])
+test_installed
+# do not uninstall here: the library may be reused in the next test.
+
+# Hypothesis: backward compatible library updates do not require
+# (uninstalled nor installed) programs or libraries to be relinked.
+# This can have one of several reasons:
+# - the soname is the difference between $current and $age, thus
+#   unchanged; in this case, the newly installed library will be used,
+# - the soname is only $current, or we are linking statically, in which case
+#   the old installed library code will be used,
+# - the numbers are not encoded at all, in which case the newly installed
+#   library will be used.
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba3.lo ]dnl
+	 [-version-info 1:0:1 -rpath $libdir], [], [ignore], [ignore])
+# Do not test the uninstalled program, it may be broken (in the second case).
+AT_CHECK([$LIBTOOL --mode=install cp liba.la $libdir], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=clean rm -f liba.la], [], [ignore], [ignore])
+test_installed
+# do not uninstall here: the library may be reused in the next test.
+
+
+# Hypothesis: with shared libraries, incompatible library updates
+# will not cause old installed programs or libraries (linked against the old
+# library version) to break.
+# This can have one of several reasons:
+# - the soname has changed, so the old installed library will still be
+#   available,
+# - we are linking statically, so the old library code will still be used.
+# In order to be sure we are still linking against the old library version,
+# we must ensure that libb is not relinked, so we must not reinstall libb here.
+AT_CHECK([$LIBTOOL --mode=link $CC $CFLAGS $LDFLAGS -o liba.la liba4.lo ]dnl
+	 [-version-info 2:0:0 -rpath $libdir], [], [ignore], [ignore])
+# We do not guarantee that old versions of an uninstalled library are still
+# available, so test_uninstalled will not necessarily work here any more.
+AT_CHECK([$LIBTOOL --mode=install cp liba.la $libdir], [], [ignore], [ignore])
+AT_CHECK([$LIBTOOL --mode=clean rm -f liba.la], [], [ignore], [ignore])
+
+# This test does not work on AIX, not even with runtimelinking, because
+# the linker always records the unversioned name as dependency.
+AT_CHECK([:; case $host_os in aix*) exit 77;; esac])
+
+test_installed
+
+
+AT_CLEANUP
diff --git a/tests/with-pic.at b/tests/with-pic.at
new file mode 100644
index 0000000..c01e5d7
--- /dev/null
+++ b/tests/with-pic.at
@@ -0,0 +1,53 @@
+# with-pic.at -- test the --with-pic flag -*- Autotest -*-
+
+#   Copyright (C) 2010 Free Software Foundation, Inc.
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from  http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+####
+
+AT_SETUP([test --with-pic])
+eval `$LIBTOOL --config | $EGREP '^(pic_flag|FGREP)='`
+
+AT_CHECK([test "z$pic_flag" != "z" || exit 77])
+AT_CHECK([test "$at_srcdir" != . || exit 77])
+
+CONFIGURE=$abs_top_srcdir/tests/demo/configure
+: ${MAKE=make}
+
+LT_AT_CONFIGURE([--disable-shared --with-pic=no], [$CONFIGURE])
+AT_CHECK([$MAKE], [], [stdout], [ignore])
+AT_CHECK([$FGREP -v "$pic_flag" stdout], [], [ignore], [ignore])
+$MAKE clean
+
+LT_AT_CONFIGURE([--disable-shared --with-pic=yes], [$CONFIGURE])
+AT_CHECK([$MAKE], [], [stdout], [ignore])
+AT_CHECK([$FGREP "$pic_flag" stdout], [], [ignore], [ignore])
+$MAKE clean
+
+LT_AT_CONFIGURE([--disable-shared --with-pic="demo,foo,bar"], [$CONFIGURE])
+AT_CHECK([$MAKE], [], [stdout], [ignore])
+AT_CHECK([$FGREP "$pic_flag" stdout], [], [ignore], [ignore])
+$MAKE clean
+
+LT_AT_CONFIGURE([--disable-shared --with-pic="foo,bar"], [$CONFIGURE])
+AT_CHECK([$MAKE], [], [stdout], [ignore])
+AT_CHECK([$FGREP -v "$pic_flag" stdout], [], [ignore], [ignore])
+$MAKE clean
+
+AT_CLEANUP